Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
14.86mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of high dimensional accuracy (±0.002 mm), robust special-steel construction and compact 50 mm length for consistent inspection results; order the gauge pin directly via Metav Werkzeuge or consult our advisors for application support. Gauge pin M323.E86, single inspection pin — 14.86 mm diameter, 50 mm length (Metav IndustryLine) The Gauge pin M323.E86 is a single plug-style inspection pin intended for precise diameter verification in workshop inspection and assembly tasks. 14.86 mm precision diameter Tolerance ±0.002 mm 50 mm working length Workshop-grade special steel construction Consistent diameter checks to reduce rework A compact inspection pin with a 14.86 mm diameter and an indicated ±0.002 mm accuracy supports fast go/no-go assessments and serial checks on turned or bored components. The tight tolerance reduces measurement uncertainty in routine inspection tasks and helps prevent costly downstream rework. Presented as a single plug-style pin, the component simplifies traceable control steps and integrates easily into existing inspection jigs and fixtures. Robust build for workshop environments Constructed from special steel in a workshop-oriented design, the pin resists wear under repeated seating and offers stable geometric performance across inspection cycles. The modest 50 mm length balances handling and reach while keeping the contact geometry rigid; this is particularly useful when checking short bores, pins or mating parts where a short, stiff probe yields reproducible results. The workshop specification emphasises durability and day-to-day reliability on the shop floor. Practical delivery and handling for efficient workflows Supplied individually and protected for transport, the plug-style pin arrives ready for immediate use and storage in its protective case, aiding organisation and preventing damage in tool cabinets. The single-item format and compact size support quick replacements within production lines and make the component convenient to keep as a calibration or inspection spare. Clear identification via SKU and GTIN streamlines inventory management and ordering processes. Secure the M323.E86 gauge pin through Metav Werkzeuge for reliable inspection parts and request tailored application advice from our consultants if required. Technical data Article number: M323.E86 GTIN: 4061905069376 SKU: M323.E86 Description: Gauge pin, single, 14.86 mm diameter, 50 mm length Brand: Metav IndustryLine Facts Diameter: 14.86 mm Length: 50 mm Tolerance / Accuracy: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version Supplied individually in a protective case FAQ What tolerance does the gauge pin offer? The M323.E86 gauge pin is specified with an accuracy of ±0.002 mm. Is this plug-style pin suitable for workshop use? Yes, the workshop version is made from special steel and designed for repeated routine inspections in production environments. How is the item supplied and identified? The pin is supplied individually in a protective case and can be ordered as SKU M323.E86, GTIN 4061905069376. Which applications are typical for this inspection pin? Typical uses include diameter verification of short bores, pin checks and assembly inspections where a compact, stiff probe improves reproducibility. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.87mm Gauge Pin 50mm Length Workshop Version, Special Steel ±0.002mm - Metav IndustryLine
Take advantage of precise dimensional control and robust workshop construction to keep inspection routines efficient; the combination of ±0.002 mm repeatability, 14.87 mm nominal diameter and a compact 50 mm body supports reliable end‑measure checks. Order the gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Gauge pin, single, 14.87 mm — 50 mm length, workshop version (Metav IndustryLine) Gauge pin, single, 14.87 mm is a compact reference pin for end‑measure checks and fixture validation in workshop and inspection environments Workshop-grade construction Diameter 14.87 mm precision Length 50 mm for compact checks High repeatability ±0.002 mm Precision where it counts in routine inspection The compact reference pin delivers dependable dimensional control with a stated accuracy of ±0.002 mm, making it suitable for fine inspection tasks and pass/fail checks. This level of tolerance supports consistent results when verifying bore sizes, gauge blocks or mating parts; the specified value describes the maximal deviation expected across comparable items and helps planners set realistic tolerance windows for production quality control. The industrial context favours tools that translate specification into repeatable, measurable outcomes. Robust workshop design for everyday use Manufactured from special steel and supplied in a workshop version, the component is built to resist handling and the usual wear of inspection benches. Surface integrity and dimensional stability reduce the need for frequent rework or replacement, so downtime for tooling exchange is minimised. The solid construction also supports simple cleaning and low‑effort maintenance, which keeps calibration intervals focused on traceability rather than correcting avoidable damage. Compact reference pin for end‑measure and fixture checks With a nominal diameter of 14.87 mm and an overall length of 50 mm, the pin is designed for confined measurement situations and for verifying the fit in locating holes or bores. The short, stiff geometry reduces bending effects during seating and aids fast, one‑hand checks on production lines. Its size and mass make it convenient to store in inspection sets or to use as a quick reference gauge during set‑up and first‑article inspection. Simple integration into inspection workflows The single‑item configuration aids selective replacement and inventory control; each unit is lightweight at 0.1 kg, making handling straightforward during automated or manual fixture checks. Traceability is supported by the listed article identifiers, allowing straightforward stock control and record keeping in quality documentation. Use as a reference pin, test mandrel or alignment plug in jigs where a precise, compact datum is required. Contact Metav Werkzeuge in Emmerich for tailored application advice, availability and assistance with workshop integration; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.E87 GTIN: 4061905069383 Label: Gauge pin, single, 14.87 mm length 50 mm Category: Gauge pins Facts Diameter: 14.87 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Material: Special steel Special features Workshop version Single item delivery SKU: M323.E87 FAQ What material is the pin made from? The pin is produced from special steel, offering a robust surface and good dimensional stability for workshop inspection routines. How accurate is the gauge pin for inspection tasks? The item provides an accuracy of ±0.002 mm, which supports repeatable end‑measure checks and consistent pass/fail assessments. Is this pin suitable for checking bores and locating holes? Yes, the compact 14.87 mm diameter and 50 mm length make the pin well suited for bore verification, fixture alignment and quick fit checks. Which identifiers should be used for stock and traceability? Use the article number M323.E87 and GTIN 4061905069383 for ordering and quality records to ensure correct traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.88 mm Gauge Pin, Single, 50 mm Length, Workshop Version - Metav IndustryLine
A compact, workshop‑grade gauge pin in special steel, with a precise Ø14.88 mm diameter and a tolerance of ±0.002 mm, provides consistent end‑dimension checks and reliable gauge setting; order the part directly via Metav Werkzeuge or consult the Metav team for technical advice and application support. Gauge pin, single, Ø14.88 mm, length 50 mm (Metav IndustryLine) Gauge pin, single, Ø14.88 mm, length 50 mm is a workshop‑grade test pin intended for repeatable end‑dimension checks and plug gauge tasks where tight tolerances are required. Workshop-grade precision pin Diameter Ø14.88 mm, length 50 mm Tolerance ±0.002 mm for repeatable checks Made from special steel for wear resistance Repeatable dimensional checks with industrial accuracy The compact design and the ±0.002 mm tolerance make this pin suitable for quality control tasks that demand consistent results. Manufactured to tight tolerances, the component reduces measurement uncertainty during go/no‑go checks and reference fits. Using a hardened, accurately turned pin for end‑dimension verification shortens inspection cycles and supports reproducible set‑ups in the workshop or production line. The measurable advantage is fewer rejects and faster throughput thanks to predictable measurement behaviour. Durable construction for frequent workshop use Built as a workshop‑grade item from special steel, the pin balances surface hardness and dimensional stability for extended service life. The material choice gives resistance to wear under repeated contact and preserves the gauge profile across numerous cycles. This durability supports long‑term process stability in fixtures and jigs and reduces the need for frequent replacements. The plain, robust geometry also simplifies cleaning and handling in busy environments. Practical handling, traceability and identification Supplied as a single piece with a nominal 50 mm length, this test pin is easy to integrate into existing gauge nests and fixture bores. The product is identified as M323.E88 and marked for straightforward inventory control and traceability in stores and metrology logs. The compact length minimises overhang and helps ensure stable seating during measurements, which contributes to lower operator influence on results. For labs and workshops seeking dependable small‑format gauges, this test pin offers a clear balance of precision, robustness and ease of use. For precise end‑dimension checks, select the Metav IndustryLine M323.E88 gauge pin — contact Metav Werkzeuge for tailored advice and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.E88 GTIN: 4061905069949 Manufacturer: Metav IndustryLine Facts Diameter: 14.88 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Special features Workshop version Material: special steel Single piece supply Intended for end‑dimension checks FAQ What tolerance does this gauge pin hold? The Metav IndustryLine M323.E88 gauge pin is manufactured to a tolerance of ±0.002 mm, enabling tight control for end‑dimension verification. Which material is used for the pin? This test pin is produced from special steel, selected to provide wear resistance and dimensional stability under frequent use. Is the gauge pin suitable for workshop fixtures and jigs? Yes, the workshop‑grade construction and the 50 mm length make the pin well suited to fixture nests, gauge blocks and plug checks in a production environment. How is the part identified for inventory and traceability? The item is supplied as a single piece under the designation M323.E88 and marked with its GTIN for straightforward stock control. Which measurement tasks is this pin intended for? The pin is designed for end‑dimension checks, plug gauge fits and reference measurements where a compact, repeatable gauge is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.89mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of ±0.002 mm accuracy, special steel construction and a compact 50 mm length for consistent end‑measurement checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.E89 — 14.89 mm diameter, 50 mm length (Metav IndustryLine) A gauge pin M323.E89 designed for precise end‑dimension verification and plug‑gauge references in workshop metrology. High accuracy ±0.002 mm tolerance Diameter 14.89 mm, precision ground 50 mm rigid length for stable measurements Workshop version, made of special steel Fast, verifiable reference for production checks This precision probe offers a compact, reliable reference for repetitive dimensional checks. With an accuracy of ±0.002 mm (approx. 2 µm), the pin reduces measurement scatter when verifying bore sizes or mating fits, which shortens inspection cycles and lowers rework rates. The 14.89 mm diameter is produced to tight tolerances and is precision ground, providing a clean contact surface that minimises contact errors. For workshop environments where throughput matters, this tool supports quick pass/fail assessments and routine spot checks without elaborate setup. Robust workshop construction for repeatable handling Built as a workshop version, the pin combines form‑fit geometry with a 50 mm length that balances accessibility and rigidity. The moderate length keeps the pin stiff under manual handling while allowing easy insertion and removal in blind or through bores. The use of special steel ensures wear resistance across repeated cycles; as a result, the reference dimensions remain stable over time and frequent use. This durability translates into fewer replacements and a more predictable inspection routine on the shopfloor. Traceability and simple inventory integration Identification and traceability are straightforward: the item is supplied under SKU M323.E89 with GTIN 4061905069956 for stock control and certification workflows. Clear labelling and a compact footprint make the pin easy to store and pick for inspection sets or fixture kits. When combined with a regimented measurement plan, the pin forms an economical element of quality assurance — enabling consistent dimensional checks without complex equipment, while still delivering high‑precision results. For reliable end‑measurement checks and simple integration into inspection routines, order the Metav IndustryLine gauge pin through Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com for tailored advice. Technical data Article number: M323.E89 GTIN: 4061905069956 Manufacturer: Metav IndustryLine Numbers / core technical data Diameter: 14.89 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Designs / special features Workshop version Material: Special steel Category: Gauge pin / measuring pin Story trigger: end measurements FAQ What is the primary use of this gauge pin? The gauge pin M323.E89 is intended for end‑dimension verification and plug‑type reference checks in workshop metrology and production inspection. How precise is the gauge pin for bore checks? The M323.E89 delivers an accuracy of ±0.002 mm, suitable for fine tolerance checks where a repeatable reference is required. Which material is used for the pin? The pin is manufactured from special steel, selected for durability and stable contact surfaces during repeated inspections. Is the pin suitable for routine shopfloor use? Yes, the workshop version of this gauge pin is designed for frequent handling and quick insertion/removal in standard inspection workflows. How can the pin be identified for inventory and traceability? The product is listed under SKU M323.E89 and GTIN 4061905069956, which facilitates stock control and record keeping. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.8mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the precise combination of Ø14.8 mm diameter, 50 mm length and ±0.002 mm accuracy for consistent inspection results in the workshop; order the gauge pin directly from Metav Werkzeuge or consult our technical advisers for application advice. Gauge pin, single, Ø14.8 mm × 50 mm — Metav IndustryLine A gauge pin designed for workshop inspection and end‑dimension checks, providing a compact, traceable probe for assembly, testing and quality control. Diameter 14.8 mm precision Length 50 mm workshop version Accuracy ±0.002 mm Special steel construction Reliable precision for routine inspection needs This compact measuring element offers repeatable dimensional control where small tolerances matter. With a nominal diameter of 14.8 mm and a measured length of 50 mm, the component is suitable for end‑dimension checks, plug‑gauge comparisons and fixture verification. The specified accuracy of ±0.002 mm supports tight inspection limits and reduces rework by identifying deviations early in the process. The robust design is intended for regular workshop use and integrates easily into manual and semi‑automated inspection routines. Durable material and straightforward handling Constructed from special steel, the pin balances surface hardness with machinability to withstand frequent use while keeping form stability. The compact geometry and modest mass (approx. 0.1 kg) simplify handling and positioning in jigs or test nests, helping to speed up repetitive measuring tasks. The workshop configuration emphasises practicality: quick visual identification, secure seating in gauge holders and predictable behaviour under typical shop conditions, which contributes to shorter inspection cycles and improved throughput. Traceability, identification and integration Identification by SKU M323.E80 and GTIN allows straightforward stock control and ordering, while the eClass entry supports catalogue and ERP integration. The clear technical specification—Ø14.8 mm, 50 mm length, special steel, ±0.002 mm—facilitates selection for compatible assemblies and fixtures, avoiding mismatches during procurement. Where batch consistency and traceable parts lists are required, this probe can be referenced directly in documentation and production plans to ensure reproducible measurement outcomes. For reliable workshop measurement choose the Metav IndustryLine gauge pin (M323.E80) — contact Metav Werkzeuge in Emmerich for ordering and specific application advice by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: M323.E80 GTIN: 4061905068485 Category: Messstifte eClass: 21170231 Facts Diameter: 14.8 mm Length: 50 mm Weight: 0.1 kg Accuracy: ±0.002 mm Special features Workshop version Material: Special steel Story trigger: End dimensions FAQ What inspection tasks is this gauge pin suited for? The gauge pin is suited for end‑dimension checks, plug comparisons and fixture verification in general workshop and production contexts. What is the declared tolerance for this measuring pin? The measuring element is specified with an accuracy of ±0.002 mm, allowing tight control for dimensional checks. Which material is used for the pin and why does it matter? The pin is made from special steel; this offers a balance of wear resistance and dimensional stability for repeated workshop use. How is the item identified for ordering and inventory? The product is listed as SKU M323.E80 with GTIN 4061905068485 for straightforward procurement and stock management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.91mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Taking advantage of a workshop‑grade design, tight ±0.002 mm tolerance and a compact 14.91 mm nominal diameter, this single gauge pin ensures repeatable reference measurements in production and inspection routines. Order the test pin directly via Metav Werkzeuge or ask the consultants for matching sets and delivery options. Metav IndustryLine Test Pin M323.E91 — Single gauge pin, Ø 14.91 mm, 50 mm length The test pin M323.E91 is a workshop‑grade gauge element for precise end‑measurement and go/no‑go checks, with a nominal diameter of 14.91 mm and a length of 50 mm. Workshop version for daily shop use Nominal diameter 14.91 mm for end‑measurement 50 mm length in hardened special steel Tolerance ±0.002 mm for high repeatability Consistent accuracy for production control The compact gauge element delivers a certified repeatability of ±0.002 mm, making it suitable for fine inspection tasks and dimensional checks where small deviations matter. As a precision reference with a nominal diameter of 14.91 mm, the component supports reliable pass/fail decisions and reduces rework by keeping measurement scatter low. The stated tolerance and the short, stiff geometry combine to minimise bending and operator‑induced error, providing a stable reference in routine quality control. Robust workshop design that lasts Built as a workshop version, the pin is manufactured from special steel and finished for durability in daily use. The 50 mm length offers a practical engagement depth for many end‑measurement and alignment tasks while keeping handling straightforward. Delivered in a protective case for transport, the gauge arrives ready for safe storage and easy retrieval at the bench. The compact mass (approx. 0.1 kg) and hardened construction resist wear, extending service life under repetitive contact conditions. Integration into inspection workflows As a single gauge pin with SKU M323.E91, the component is straightforward to integrate into inspection fixtures, comparative checks and set‑up procedures. Marked traceability with GTIN 4061905070365 simplifies inventory and compliance documentation. The combination of compact form, robust material and tight tolerance supports automated and manual gauging alike, improving throughput by making reference measurements faster and less ambiguous. For workshop environments that demand dependable reference gauges, choose Metav IndustryLine — contact Metav Werkzeuge in Emmerich for tailored supply and advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M323.E91 GTIN: 4061905070365 Brand: Metav IndustryLine Facts Nominal diameter: 14.91 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: special steel Workshop version Delivered in protective case for transport Designation: test pin, single FAQ What is the primary use of this test pin? The test pin M323.E91 from Metav IndustryLine is intended for end‑measurement, reference checks and go/no‑go gauging in workshop and inspection applications. Is the material specified for wear resistance? Yes, the gauge pin is made from special steel, a choice that gives the M323.E91 increased wear resistance and dimensional stability under frequent contact. What measurement accuracy can be expected? The single gauge pin provides a tolerance of ±0.002 mm, which supports high repeatability in routine inspection tasks. How is the item supplied for transport and storage? The pin is delivered in a protective case suitable for transport, ensuring safe handling from the warehouse to the workshop bench. Can the M323.E91 be used in fixture setups and inventory systems? Yes, the test pin is well suited to fixture integration and its GTIN (4061905070365) and SKU (M323.E91) make inventory tracking and documentation straightforward. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.92mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Take advantage of precise end‑measurement capability and workshop robustness thanks to a Ø 14.92 mm diameter and a verified tolerance of ±0.002 mm, supplied ready for transport in a protective case; order the test pin directly via Metav Werkzeuge or consult the sales team if clarification is required. M323.E92 test pin – Gauge pin, Ø 14.92 mm, 50 mm length (Metav IndustryLine) A M323.E92 test pin designed as a workshop‑grade gauge pin for precise end‑measurement and alignment tasks in inspection and assembly environments. Workshop version, robust construction Diameter Ø 14.92 mm, tolerance ±0.002 mm 50 mm overall length for end‑measurement Supplied in protective transport case Precision for repeatable end‑measurement The M323.E92 functions as a precision gauge pin for end‑measurement, alignment and fixture checks, offering a consistent datum for inspection tasks. With a nominal diameter of Ø 14.92 mm and a declared tolerance of ±0.002 mm, the component provides a narrow dimensional window that supports reproducible measurements and reliable plug‑gauge references. This accuracy reduces uncertainty in pass/fail evaluations and aids quality control in production and rework operations. Workshop‑grade design and material advantages Manufactured from special steel, the pin is intended for demanding shop use where mechanical robustness matters. The workshop‑grade execution ensures handling and deployment in routine measurement cycles without excessive concern for minor knocks during use. Supplied in a protective transport case, the pin remains protected during storage and transit, preserving its dimensional integrity and extending service life while simplifying logistics on the shop floor. Practical uses and integration into inspection workflows Designed for end‑measurement applications, the pin serves as a reference element in fixture setup, bore gauging and alignment procedures. The 50 mm overall length offers sufficient engagement for most standard checks while keeping the component compact for handling. As a single‑piece test pin, it integrates easily into measurement benches, pin gaugesets or bespoke inspection fixtures where a precise cylindrical datum is required for comparative and go/no‑go assessments. For workshop-ready precision order the M323.E92 gauge pin via Metav Werkzeuge or contact the Metav team at info@metav-werkzeuge.com / +49 2822 7131930 to discuss suitability for specific inspection tasks Technical data SKU: M323.E92 GTIN: 4061905070372 Material: Special steel Diameter: 14.92 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Category: Gauge pin (Messstifte) Delivery: single item in transport case Special version: Workshop execution Facts Diameter (numeric): 14.92 mm Length (numeric): 50 mm Tolerance (numeric): ±0.002 mm Weight (numeric): 0.1 kg GTIN (numeric): 4061905070372 Special features Workshop‑grade construction Supplied in protective transport case Single test pin for end‑measurement and alignment Manufactured from special steel FAQ What are the exact dimensions of the pin? Diameter 14.92 mm, overall length 50 mm for the M323.E92 test pin. What tolerance is specified for this gauge pin? The pin is specified with a dimensional tolerance of ±0.002 mm. Which material is used for the M323.E92? The pin is manufactured from special steel. Is the pin intended for shop or laboratory use? The M323.E92 is a workshop‑grade gauge pin, designed for robust shop use and routine inspection tasks. Does the delivery include protective packaging? Yes, the pin is supplied as a single item in a protective transport case. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.93mm Gauge Pin Length 50mm Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, compact dimensions and workshop-suited robustness to keep fine‑mechanical inspection tasks reliable and efficient; order the required inspection pins directly via Metav Werkzeuge or consult our advisers for specification support. Gauge pin, single inspection pin Ø 14.93 mm – 50 mm length (Metav IndustryLine) The gauge pin, single inspection pin Ø 14.93 mm – 50 mm length is a precision measurement pin for fine mechanical and workshop use, intended for end‑measure checks, fixture alignment and dimensional verification in small bore applications. Workshop version, robust design Diameter 14.93 mm precision fit Tolerance ±0.002 mm accuracy Supplied in transport box Precise diameter and tight tolerance for repeatable checks The inspection pin delivers a diameter of 14.93 mm with a tolerance of ±0.002 mm, which corresponds to a 2 µm deviation and supports highly repeatable measurements in fine‑mechanical contexts. Such accuracy reduces rework and inspection time by providing a stable reference for bore gauging and end‑measure verification. The combination of special steel construction and a compact form factor ensures that dimensional stability is maintained during handling and short measurement cycles, making this gauge especially suitable where small tolerances are decisive. Compact length and workshop design that aid everyday handling With a length of 50 mm and a low mass (approx. 0.1 kg), the pin is easy to position by hand yet rigid enough to avoid significant deflection during typical workshop tasks. The declared workshop execution underlines durability under frequent use in production and maintenance environments. Delivery in a transport box (plastic or wooden) protects the item during storage and transit, preserving the measurement surface and supporting clean handling procedures between uses. The small footprint makes the pin a practical addition to inspection kits and jigs without occupying excessive space. Application range and benefit for quality processes Classified within the micro measurement range (maximum span up to 100 mm), this inspection pin is tailored to fine‑mechanical work such as small bore checking, alignment of fixtures and end‑measure standards for assembly or repair operations. The robust material and tight tolerance support repeatability and reliable pass/fail comparisons when used alongside calibrated measuring systems. As a precision tool from a recognised industrial line, the pin contributes to consistent quality control and helps shorten the feedback loop between measurement and corrective action on the shop floor. Contact Metav Werkzeuge for procurement details and specification advice based on the Metav IndustryLine range; our advisers can confirm suitability for specific inspection tasks and provide ordering assistance. Technical data Article number: M323.E93 GTIN: 4061905070389 SKU: M323.E93 Facts Diameter: 14.93 mm Length: 50 mm Weight: 0.1 kg Tolerance: ±0.002 mm Special features Material: Special steel Workshop execution Supplied in transport box (plastic/wood) Category: Gauge pins FAQ What level of accuracy does this inspection pin offer? The inspection pin provides an accuracy of ±0.002 mm, making it suitable for applications that require micrometre‑level repeatability; the specification is part of the Metav IndustryLine gauge pin data (SKU M323.E93). For which types of measurements is the pin intended? This gauge pin is intended for end‑measure checks, bore verification and fixture alignment in fine‑mechanical and workshop settings, where the 14.93 mm diameter and 50 mm length suit small‑format components. What is the material and how does it affect durability? Constructed from special steel, the pin from Metav IndustryLine combines surface resilience with dimensional stability, supporting frequent workshop use while maintaining measurement integrity. Is the pin suitable for inclusion in inspection kits? Yes, the compact dimensions and protected delivery in a transport box make this pin suitable for inspection kits and portable measurement sets; the low weight also eases handling during repeat checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.94mm Gauge Pin Length 50mm Workshop Finish, ±0.002 Accuracy - Metav IndustryLine
Take advantage of the high repeatability and tight tolerance of this workshop test pin to secure consistent end‑measure inspections; its 14.94 mm diameter and 50 mm length in special steel make it a compact, robust solution for routine gauging. Order directly via Metav Werkzeuge or consult our specialists for supply and logistics. Gauge pin, single — 14.94 mm dia, 50 mm length (Metav IndustryLine) The Gauge pin, single, 14.94 mm, 50 mm is a workshop‑grade test pin designed for precise end‑measurement checks and go/no‑go gauging in compact inspection setups. Workshop execution, robust design Diameter exactly 14.94 mm for end‑measure use High precision tolerance ±0.002 mm Supplied in a protective transport case Precision for fine mechanical inspection The compact design targets applications that demand repeatable small‑part checks: with a diameter of 14.94 mm and a specified tolerance of ±0.002 mm, the pin suits fine mechanical inspection where minimal clearance matters. Classified in the micro measuring range (10–100 mm), this test pin combines dimensional stability and short jaw geometry to reduce bending and positional error during routine go/no‑go checks, making it an efficient measuring artefact for workshop metrology and component end‑measure verification. Durable material and workshop readiness Manufactured from special steel, the pin is engineered for wear resistance and consistent surface quality that preserves its gauge dimensions under repeated use. The workshop execution emphasises practical handling: chamfers for easy entry, a hardened shaft for longevity and a finish that minimises surface corrosion. Delivered in a protective transport case, the pin is protected during storage and transit, easing workshop logistics and reducing the risk of damage before use. Practical benefits for production control As a single‑piece gauge, the test pin streamlines quick fit checks, alignment testing and reference measurements on jigs and fixtures. The combination of compact length (50 mm) and tight tolerance supports rapid decision‑making on the shopfloor: inspect, accept or reject with minimal setup. Traceable identification (SKU M323.E94, GTIN 4061905070396) assists inventory management and documentation in quality workflows while the familiar gauge‑pin format integrates easily with existing plug‑gauge routines and inspection fixtures. For workshop‑grade end‑measure checks, contact Metav Werkzeuge in Emmerich to secure the Metav IndustryLine M323.E94 gauge pin and confirm delivery and packing options: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M323.E94 GTIN: 4061905070396 Category: Gauge pin (test pin) Facts Diameter: 14.94 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution Supplied in protective transport case SKU: M323.E94 FAQ What is the intended use for this gauge pin? The gauge pin is intended for end‑measure checks, go/no‑go gauging and alignment tasks in workshop inspection where compact, repeatable measurements are required. What accuracy can be expected from the test pin? The test pin offers a tolerance of ±0.002 mm, providing high repeatability suitable for fine mechanical inspection and tight fit verifications. Is the pin ready for immediate use after delivery? Yes; the Metav IndustryLine gauge pin M323.E94 is supplied in a protective case and ready for workshop use without further preparation. What material is the pin made from and how does that affect wear? The pin is manufactured from special steel, chosen for surface durability and dimensional stability to withstand repeated insertion and contact during inspection. How does the 14.94 mm diameter fit into measurement categories? With a diameter of 14.94 mm and a 50 mm length, the item falls into the micro measuring range (10–100 mm), optimised for precision work on small components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.95mm Gauge Pin 50mm Length Workshop Version - Metav IndustryLine
Take advantage of the 14.95 mm diameter and ±0.002 mm accuracy for reliable end‑dimension verification and repeatable workshop measurements; the robust workshop design and delivery in a transport case keep the pin protected during handling and transport. Order the gauge pin directly via Metav Werkzeuge or consult our advisors for specification matching and procurement assistance. Gauge pin, single, 14.95 mm diameter · 50 mm length — Metav IndustryLine The gauge pin, single, 14.95 mm diameter and 50 mm length is a precision inspection pin designed for end‑dimension checks and alignment tasks in workshop and production environments Workshop version, robust design Diameter 14.95 mm with high accuracy 50 mm length for compact measurements Special steel construction for wear resistance Reliable precision for end‑dimension verification The inspection pin delivers a measured tolerance of ±0.002 mm, positioning it in the high‑precision range for small components. As a compact gauge in the micro range (measurement span under 100 mm), it is optimised for fine mechanical work where short measuring faces reduce torsion and improve repeatability. The specified diameter of 14.95 mm is produced to tight dimensional control, enabling consistent fits and go/no‑go assessments in assembly and inspection routines. This level of accuracy reduces rework and supports tighter process control across batch runs. Robust design for everyday workshop use Manufactured from special steel, the pin is engineered to resist wear in frequent use while maintaining its critical dimensions. The 50 mm length provides a secure working grip without excess overhang, aiding manual handling and gauge insertion in jigs or bore checks. Supplied as a workshop edition, the component is finished and prepared for practical shopfloor conditions. Delivery includes a protective transport case, which simplifies storage and reduces the risk of damage in transit — a pragmatic choice for mobile metrology or multi‑workstation environments. Practical advantages for quality control and throughput As a single plug‑style gauge, the component is easy to integrate into inspection sequences and serves as a straightforward reference for end‑dimension checks and alignment tasks. The compact form factor and proven material choice contribute to repeatability and long service life, helping to maintain consistent quality control across production cycles. The part’s clear labelling and SKU facilitate inventory management and fast replacement, supporting lean stocking practices in maintenance and inspection departments. Contact Metav Werkzeuge for tailored advice and procurement of the Metav IndustryLine gauge pin (M323.E95) with 14.95 mm diameter and 50 mm length — expert support from Emmerich for quick delivery and specification checks. Technical data Article number: M323.E95 GTIN: 4061905066559 Label: Prüfstift, einzeln, 14,95 mm Länge 50 mm Weight: 0.1 kg Material: Special steel Measurements Diameter: 14.95 mm Length: 50 mm Accuracy / tolerance: ±0.002 mm Features Workshop version (robust design) Delivered in transport case for safe handling Category: Gauge pins (Messstifte) eClass: 21170231 FAQ Is the pin suitable for precision go/no‑go checks on bores? The gauge pin is suitable for go/no‑go and end‑dimension checks; the 14.95 mm diameter and ±0.002 mm tolerance make it appropriate for tight bore verification and alignment tasks. What material is the gauge pin made from and how durable is it? The pin is manufactured from special steel, chosen for wear resistance under frequent contact; this ensures durability in routine workshop inspection as supplied by Metav IndustryLine. Does the product arrive ready for use and how is it packaged? The single gauge pin is supplied ready for workshop use and is delivered in a protective transport case to reduce handling damage during storage and movement. Can this pin be used in assembly jigs and fixtures? Yes — the compact 50 mm length and stable diameter make the pin well suited for use in jigs, fixtures and manual alignment procedures in production settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.96mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
Taking advantage of precision, robust workshop construction and compact dimensions, this gauge pin ensures reproducible end‑dimension checks for small parts; order directly via Metav Werkzeuge or contact our advisors for specification support. Gauge pin M323.E96 — single plug gauge, 14.96 mm Ø × 50 mm (Metav IndustryLine) The gauge pin M323.E96 is a workshop‑grade precision plug gauge designed for end‑dimension verification of small mechanical components and fits inspection fixtures and gauge blocks. Workshop‑grade construction Diameter 14.96 mm for end‑dimension checks Tolerance ±0.002 mm for high accuracy Precision where space and repeatability matter This compact plug gauge delivers reliable measurements for small bores and end dimensions thanks to a nominal diameter of 14.96 mm and a 50 mm length that keeps the effective measuring span short and stiff. The specified tolerance of ±0.002 mm translates into dependable repeatability during serial inspections and short‑run production checks. Constructed from special steel, the pin resists wear in routine workshop use while providing a consistent reference for fit and clearance decisions. Designed for practical workshop workflows Built as a workshop‑grade component, the pin integrates easily with benches, jigs and portable inspection setups. The compact geometry reduces handling time and simplifies alignment in fixtures, helping to speed up go/no‑go evaluations and minimise rework. Delivery in a dedicated transport box protects the finish during storage and transit and keeps the pin ready for immediate use in maintenance rounds or setup checks. Its size places it in the micro range of precision plugs, making it suitable for watchmaking, instrument parts and small‑bore components. Clear applications and measurable benefits Ideal for end‑dimension verification, assembly checks and comparative gauging, this plug gauge provides a concise traceable reference that improves first‑pass yields and assembly certainty. The combination of special steel construction and tight dimensional control supports reproducible fits and reduces the need for downstream adjustments. For workshops and quality cells requiring compact, accurate reference pins, this product helps standardise measurement routines and shortens inspection cycles while preserving component integrity. Secure workshop precision with Metav IndustryLine gauge pins — contact Metav Werkzeuge in Emmerich for tailored advice and order support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.E96 GTIN: 4061905066566 Manufacturer: Metav IndustryLine Facts Diameter: 14.96 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop execution Material: Special steel Delivered in transport box Category: Messstifte FAQ What is the nominal diameter and length of this gauge pin? The gauge pin M323.E96 has a nominal diameter of 14.96 mm and a length of 50 mm suitable for compact inspection tasks. How accurate is the plug gauge for end‑dimension checks? Accuracy is specified as ±0.002 mm, which supports consistent repeatability for small‑part inspections and assembly verifications. Is the pin suitable for routine workshop use and transport? Yes. The M323.E96 is a workshop‑grade plug gauge made from special steel and supplied in a transport box to protect the finish during handling. Which applications is this gauge pin best suited for? This plug gauge is intended for end‑dimension verification, small‑bore inspection and fixture checks in machine shops, tool rooms and quality control stations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.97mm Gauge Pin, Single, 50mm Length, Special Steel, Workshop Version - Metav IndustryLine
Take advantage of a compact, dimensionally stable inspection pin that combines a 14.97 mm tolerance fit with a ±0.002 mm accuracy specification and a robust workshop design for repeatable fixture and end‑measurement tasks; order directly via Metav Werkzeuge or consult our team for application advice. Gauge pin M323.E97 — 14.97 mm diameter, 50 mm length (Workshop version) — Metav IndustryLine A gauge pin M323.E97 designed for precise end‑measurement and fixture alignment in workshop and inspection environments. Precision fit: 14.97 mm diameter 50 mm length for fixture set‑ups Accuracy ±0.002 mm Workshop version, robust design Supplied in transport case Engineered for reliable end‑measurement and repeatability The gauge pin is manufactured to a narrow diameter of 14.97 mm, delivering a tight fit where consistent control of the mating tolerance is required. With a specified accuracy of ±0.002 mm, this pin supports high‑precision checks and comparative gauging in routine quality control. The compact 50 mm length and low mass make it suitable for quick insertion into jigs, plug gauges or assembly fixtures while maintaining dimensional stability during use. These properties translate into fewer reworks and more predictable inspection outcomes. Practical handling and workplace advantages Constructed from special steel, the pin balances stiffness and wear characteristics appropriate for workshop handling and repeated insertion cycles. Its modest weight of 0.1 kg and the workshop‑oriented finish simplify manual handling during set‑up. Delivery in a transport case protects the datum surfaces in transit and storage, preserving the measuring length and contact faces until use. The solid construction and packaging reduce downtime for replacement and help to maintain calibration intervals by preventing accidental damage. Suited to inspection, assembly and fixture alignment workflows This single gauge pin is a straightforward tool for end‑dimension verification, alignment of bores and locating pins in assembly fixtures. Where quick comparative inspection is required, the pin acts as a reliable reference gauge to verify bore sizes, seating planes and positional fits without complex measuring devices. Its workshop specification ensures resilient performance in production environments, while the clear dimensional and tolerance information facilitates integration into quality documentation and work instructions. Contact Metav Werkzeuge for application guidance on the M323.E97 gauge pin and to confirm compatibility with existing jig and inspection systems — our Emmerich team provides fast, practical support. Technical data Article number: M323.E97 GTIN: 4061905066573 Label: Gauge pin, single, 14.97 mm diameter, 50 mm length Manufacturer: Metav IndustryLine Core specifications Diameter: 14.97 mm Length: 50 mm Weight: 0.1 kg Tolerance/accuracy: ±0.002 mm Materials & features Material: Special steel Workshop version Supplied in transport case SKU: M323.E97 FAQ What tolerance is specified for this gauge pin? The gauge pin M323.E97 is specified with an accuracy of ±0.002 mm, suitable for fine comparative checks and tight fitting tests. Which material is used for the pin? The M323.E97 is made from special steel, chosen for dimensional stability under routine workshop use. Is the pin supplied ready for immediate use out of the box? The product is supplied in a transport case to protect measuring faces; no calibration certificate is indicated in the product data. Can this pin be used for fixture alignment and bore checking? Yes. The 14.97 mm diameter and 50 mm length make it well suited for fixture alignment, bore checks and locating tasks in assembly and inspection workflows. How is the item identified for ordering? Order using the article number M323.E97 or GTIN 4061905066573 to ensure the correct workshop‑version gauge pin is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.98mm Test Pin 50mm Length Workshop Version - Metav IndustryLine
Reliable workshop-grade gauge pin offering a compact 14.98 mm diameter, 50 mm usable length and a tight ±0.002 mm tolerance for repeatable end-dimension checks; the special steel construction and protective transport case support durability and safe storage. Order this precision pin directly via Metav Werkzeuge or consult our advisors for application guidance. Gauge pin, single — 14.98 mm diameter, 50 mm length (M323.E98, Metav IndustryLine) Gauge pin, single, 14.98 mm / 50 mm — a compact measuring element for precise end‑dimension checks and fixture setting in workshop metrology. Workshop version for robust daily use Precise 14.98 mm diameter 50 mm usable length Dimensional tolerance ±0.002 mm Supplied in protective transport case Precision that reduces rework and speeds inspection A compact reference element delivers measurable gains on the inspection bench: the 14.98 mm diameter and ±0.002 mm specification provide a reproducible reference for end‑dimension verification, alignment and quality control. Built to the requirements of everyday production, this measuring dowel translates high geometric fidelity into faster decision cycles on go/no‑go checks and dimensional reporting. The tight tolerance reduces measurement scatter and therefore the need for repeat checks, improving throughput without compromising traceability. Designed for workshop handling and fixture integration The short, rigid form and 50 mm usable length make the component easy to mount in jigs, gauges and setting fixtures; its workshop version designation indicates a focus on handling resilience and practical fit. The weight of approximately 0.1 kg and the balanced geometry support steady seating in sockets and bores, while the delivered transport case keeps the measuring surface protected between uses. Integration into existing inspection routines is straightforward, with the pin serving as a reliable datum for both single‑point checks and comparative set‑ups. Durable material and clear application focus Manufactured from special steel, the pin resists everyday wear while maintaining its geometric integrity under normal workshop conditions. The construction supports repeated insertion and withdrawal, preserving the measurement edge and extending service life. As an end‑dimension reference element, it suits routine production checks where consistent repeatability is essential. For customers seeking a robust, no‑nonsense measuring component, this unit offers an attractive balance of accuracy, durability and operational simplicity under the Metav IndustryLine label. For application advice or specification confirmation for the M323.E98 gauge pin, contact Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability and procurement options Technical data SKU: M323.E98 GTIN: 4061905067365 Brand: Metav IndustryLine Material: special steel Version: workshop execution Weight: 0.10 kg Facts Diameter: 14.98 mm Usable length: 50 mm Tolerance: ±0.002 mm Special features Supplied in protective transport case Compact reference for end‑dimension checks Suitable for jig and fixture integration Robust handling properties for daily workshop use FAQ What is the exact diameter and length of this gauge pin? The pin is specified with a diameter of 14.98 mm and a usable length of 50 mm; the product is listed as M323.E98 from Metav IndustryLine. How precise is the measuring element? Precision is stated as ±0.002 mm, which makes the M323.E98 suitable for repeatable end‑dimension verification in workshop environments. Is the pin delivered with any protective packaging? Yes, the gauge pin is supplied in a protective transport case to preserve the measuring surfaces during storage and transit. Can this pin be used as a datum in fixtures and jigs? The compact form and 50 mm usable length allow the pin to be integrated as a datum or reference element in fixtures and setting gauges. What material is the pin made from and how does that affect durability? Constructed from special steel, the measuring pin is designed for durability under regular workshop handling and repeated insertion cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.99mm Test Pin 50mm Length Workshop Finish - Metav IndustryLine
The precise combination of a 14.99 mm diameter, 50 mm length and ±0.002 mm repeatability delivers reliable go/no‑go and end‑measurement checks; order the gauge pin directly via Metav Werkzeuge or consult the team for application advice. Gauge pin M323.E99 — single inspection pin, 14.99 mm dia, 50 mm length (Metav IndustryLine) A gauge pin, single piece with a 14.99 mm nominal diameter and 50 mm usable length, designed for workshop measurement tasks and end‑size verification in production and assembly. Precision diameter 14.99 mm for tight fits Length 50 mm for compact inspection tasks Accuracy ±0.002 mm for reproducible checks Reliable inspection for tight tolerances The compact solid pin provides a clear, measurable datum for both go/no‑go and end‑measure operations, making it suitable where consistent repeatability is essential. With a nominal diameter of 14.99 mm and an accuracy of ±0.002 mm, the pin reduces uncertainty in assembly and inspection routines, lowering the risk of rework. The hardened special steel construction maintains geometric stability under routine handling, so dimensional checks remain trustworthy over many cycles. Built for daily workshop use Manufactured as a workshop version, the pin balances durability with practical handling: the 50 mm length gives sufficient engagement without excess overhang, supporting quick manual verifications at the bench or on the shop floor. The robust material choice ensures resistance to wear and straightforward cleaning after use. This combination of form and material supports faster inspection cycles and contributes to uninterrupted production flow by making simple checks quick and dependable. Integrating precision into quality workflows As an individual inspection element, the pin is straightforward to incorporate into existing jigs, fixtures and test benches; the consistent 14.99 mm sizing simplifies interchangeability and stocking. Where documented traceability is required, the supplied product details (SKU and GTIN) permit straightforward identification in quality records. The result is a compact, repeatable measuring aid that helps maintain process capability and supports documented quality assurance across small‑batch and series production. For precise workshop checks specify the Metav IndustryLine gauge pin M323.E99 and contact Metav Werkzeuge in Emmerich for tailored advice and local delivery options — info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: M323.E99 GTIN: 4061905067372 Manufacturer: Metav IndustryLine Facts Diameter: 14.99 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Special features Workshop version Material: special steel Single inspection/gauge pin Intended use: end‑size/end‑measure checks ECLASS: 21170231 FAQ What is the nominal diameter and why is 14.99 mm relevant? The nominal diameter of the gauge pin is 14.99 mm; this near‑limit size allows verification of holes and fits where tight clearances are specified, ensuring components meet dimensional requirements. Is the pin suitable for repeated workshop use? Yes, the workshop version construction in special steel is designed for regular handling and routine inspections without rapid degradation. Can this pin be used as a reference in jigging or fixture tests? The single pin format and consistent 14.99 mm sizing make it suitable as a datum element in jigs and fixtures for quick verification and alignment tasks. What does the stated accuracy ±0.002 mm mean in practice? An accuracy of ±0.002 mm indicates very small deviation in diameter, supporting reproducible checks and reducing measurement uncertainty during quality control. How is the product identified for ordering or stock management? The product is listed under SKU M323.E99 and GTIN 4061905067372, which can be used for procurement and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.9mm Gauge Pin 50mm Length Workshop Version, Special Steel - Metav IndustryLine
Take advantage of workshop-grade precision and robust construction combined with a tight ±0.002 mm manufacturing tolerance and a 14.9 mm nominal diameter for reliable end-size verification; order directly through Metav Werkzeuge or consult our specialists for application advice. Test pin M323.E90 — Gauge pin for end-dimension checks, 14.9 mm Ø, 50 mm length (Metav IndustryLine) Test pin M323.E90 serves as a compact, workshop-grade verification pin designed for dimensional checks in production and inspection routines, especially for end-size measurements and repeatability checks. 14.90 mm nominal diameter for bore checks 50 mm overall length for deep bores ±0.002 mm manufacturing tolerance Special steel, workshop execution Reliable metrology performance for daily inspection tasks The pin is engineered for consistent results in routine quality control: the 14.9 mm nominal diameter combined with a manufacturing tolerance of ±0.002 mm reduces uncertainty when checking bores, seats and mating parts. This level of precision supports efficient pass/fail decisions on the shop floor and integrates smoothly into go/no-go checks or fixture-based verification. The technical specification is deliberately straightforward so that measurement departments can rely on repeatable dimensional references without elaborate setup. Robust design that withstands workshop handling With a total length of 50 mm and a compact form factor, the pin balances reach and rigidity to resist bending during typical handling. Constructed from special steel in a workshop execution, the component provides durable contact surfaces that maintain geometry under regular use. The relatively low mass (0.1 kg) aids quick manipulation and placement in fixtures, while the controlled tolerance ensures the pin remains a stable reference across production cycles, reducing rework and inspection time. Fits into inspection workflows and documentation The M323.E90 pin is suitable for plain mechanical checks and can be used alongside calipers, micrometres and coordinate inspection systems as a reliable reference for end dimensions. The item’s traceable identifiers (SKU M323.E90, GTIN 4061905070358) make it straightforward to include in inventory lists and inspection protocols. For specialised applications or integration into bespoke gauges, Metav Werkzeuge’s metrology advisors can advise on compatible fixturing and handling practices to ensure the pin’s characteristics are fully utilised in process control. Choose the Metav IndustryLine M323.E90 for dependable workshop verification and contact Metav Werkzeuge in Emmerich for targeted application support: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M323.E90 GTIN: 4061905070358 Label: Test pin, single, 14.9 mm diameter, length 50 mm Facts Diameter: 14.9 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Workshop execution (robust handling) Category: Gauge pin / Test pin FAQ What is the intended use for this test pin? The M323.E90 test pin is intended for end-dimension verification, bore checks and fixture-based pass/fail inspection in workshop and production environments. How precise is the gauge pin? This gauge pin is manufactured to a tolerance of ±0.002 mm, offering high repeatability for routine inspection tasks. Which material is the pin made from? The pin is made from special steel and comes in a workshop execution suitable for regular handling. Can the pin be included in documentation and traceability systems? Yes, the M323.E90 includes identifiers such as SKU M323.E90 and GTIN 4061905070358 for inventory and inspection record keeping. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15 mm Gauge Pin, Single, 50 mm Length, Workshop Version - Metav IndustryLine
Take advantage of precise industrial tolerances and a compact workshop design for consistent end measurements; the combination of ±0.002 mm accuracy and special steel construction ensures reliable reference values in assembly and testing operations — order via Metav Werkzeuge or consult the sales team for application advice. Test pin M323.F00 — single gauge pin, 15.00 mm diameter, 50 mm length (Metav IndustryLine) The Test pin M323.F00 serves as a compact reference probe for end measurements and fixture checks in workshop environments, supplied as a single precision pin suitable for bench or jig use. 15.00 mm diameter for precise end measurements 50 mm compact working length Tolerance ±0.002 mm industrial precision Workshop-grade special steel construction Accurate reference values that reduce rework and uncertainty The solid cylindrical design provides a stable reference for end-measurement tasks where repeatability matters. With a stated tolerance of ±0.002 mm, this pin delivers industrial-grade dimensional control that supports quality assurance processes and reduces the need for rework. The moderate mass and balanced geometry help maintain contact consistency during manual or fixture-based measurements, contributing to reproducible results in serial inspection and bench testing. Compact form and robust material for everyday workshop use A length of 50 mm and a nominal diameter of 15.00 mm keep handling simple while allowing use in confined setups and measurement fixtures. The special steel construction offers a durable contact surface that resists wear under routine use in production and inspection environments. The single-pin format permits targeted checks and makes the component easy to store and replace within a tooling kit, ensuring minimal downtime when references are required. Clear identification and integration into inspection workflows Traceability is supported by the product identifiers SKU M323.F00 and GTIN 4061905067389, simplifying inventory and document control. The workshop-oriented finish and compact dimensions mean the pin integrates readily into existing jigs and gauges as a reference element for end-measurements. Suppliers such as Metav IndustryLine combine broad distribution with a service approach that helps workshops source precision components without compromising on supply reliability. For dependable end-measurement references, request the Metav IndustryLine test pin via Metav Werkzeuge — contact the team for specification matching or ordering assistance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M323.F00 GTIN: 4061905067389 Category: Gauge pin / Test pin Facts Diameter: 15.00 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Single test pin Application hint: End measurements FAQ What level of accuracy does the test pin provide? The test pin is specified with a tolerance of ±0.002 mm, offering industrial precision suitable for reference and inspection tasks. Which materials is the pin made from? The probe is manufactured from special steel, chosen for wear resistance and dimensional stability under regular workshop use. Is this pin suitable for fixture or jig applications? Yes, the compact 50 mm length and standard 15.00 mm diameter make the pin suitable as a reference element in fixtures and jigs for end-measurements. How is the product identified for inventory control? Identification is provided by SKU M323.F00 and GTIN 4061905067389, which assist with ordering and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15,01- 16,00mm Messstift-Sätze, Werkstatt-Ausführung, ± 0,004 mm
- aus Spezial-Stahl Werkstatt-Ausführung, Länge 50 mm Genauigkeit < ± 0,004 mm im Behältnis/KastenTechnische Daten- Messbereich: 15,01- 16,00mm- Stufung: 0,01mm- Anzahl/Satz: 100
15-16mm Gauge Pin Set 101pcs 0.01mm Increment With Probe Holder In Plastic Case - Metav IndustryLine
The combination of high incremental precision, robust special steel construction and organised transport storage makes this gauge pin set a practical choice for repeatable size checks and assembly control. Order the gauge pin set directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin set M318.585 — 15.00–16.00 mm, 0.01 mm step (Metav IndustryLine) Gauge pin set M318.585 is a precision inspection kit for verifying bore diameters and fit tolerances in production and inspection environments. 101-piece precision set Range 15.00–16.00 mm 0.01 mm step accuracy Supplied in transport case Accurate size control for fast, reliable inspection This precision pin collection is designed for incremental checking across the 15.00–16.00 mm range with 0.01 mm steps, enabling fine gradation when assessing bore sizes and clearance fits. The specified performance includes an indicated accuracy of 0.004 mm, which supports tight tolerancing in workshop quality control. Using a stepped set reduces setup time for sequential inspections and simplifies pass/fail decisions during series production, while the 50 mm pin length provides a stable seating depth for standard bore checks. Durable design and tidy workshop storage Constructed from special steel, the pins resist everyday wear and keep dimensional stability across repeated use. The set includes a pin holder that aids handling during measurement tasks and prevents accidental damage when selecting pieces. Delivery in a dedicated transport case protects the pins during movement between workstations and keeps the 101 items organised for quick retrieval. The overall kit weight of 10.7 kg reflects the solid construction and the professional nature of the set, suitable for busy machine shops and inspection benches. Practical applications in manufacturing and inspection This set is tailored for use in mechanical engineering, toolrooms and assembly control where dimensional conformity is critical. The fine 0.01 mm increment is particularly useful when matching fits or checking progressive machining steps. As a compact gauge solution, it supports repeatable checks without complex measuring devices, making routine in-process control faster and less error-prone. The collection’s format also suits use alongside coordinate measuring equipment for rapid pre-checks before more elaborate inspection procedures. Contact Metav Werkzeuge today for supply details and mention M318.585 to ensure rapid handling from Emmerich Technical data Article number: M318.585 GTIN: 4054469156224 Customs tariff number: 90173000 Facts Pieces per set: 101 Measurement range: 15.00–16.00 mm Increment / step: 0.01 mm Pin length: 50 mm Accuracy: 0.004 mm Weight: 10.7 kg Special features Material: special steel With pin holder Supplied in transport case Category: gauge pins Set design for sequential bore checks FAQ What is the intended use for this gauge pin set? The gauge pin set M318.585 is intended for checking bore diameters, verifying assembly fits and performing rapid in-process pass/fail inspections in workshops and production lines. How fine are the steps and how does that help inspection? Steps of 0.01 mm allow fine-grained assessment of bore sizes; the 0.01 mm increment in this M318.585 set makes it easier to identify incremental deviations during progressive machining or assembly. Is the set delivered with a calibration certificate? The M318.585 set is supplied in a transport case; it is not provided with an ISO 17025 calibration certificate unless explicitly labelled as calibrated on the product listing. What material are the pins made from and how durable are they? Pins are manufactured from special steel, offering durable performance for routine workshop use and helping to maintain dimensional stability over many inspection cycles. Can this set be used for serial production checks? Yes, the organised layout and fine increments of the M318.585 set support rapid, repeatable checks suitable for serial production and incoming inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.01mm Gauge Pin Length 50mm Workshop Finish - Metav IndustryLine
Compact inspection pin combining 15.01 mm diameter, 50 mm length and a tight ±0.002 mm tolerance for dependable reference measurements; robust special steel construction ensures long service life in workshop environments. Order the gauge pin directly via Metav Werkzeuge or consult the Metav specialists for technical guidance. Gauge pin, single M323.F01 – Ø 15.01 mm, 50 mm length (Metav IndustryLine) The gauge pin, single 15.01 mm, 50 mm is a hardened inspection pin for precise end‑measurement and reference checks in metrology benches and workshop quality control. Workshop-grade construction for daily use Diameter 15.01 mm with ±0.002 mm tolerance 50 mm hardened special-steel pin Single-piece design, traceable GTIN 4061905067396 Accurate reference for inspection and calibration As a compact reference element, the M323.F01 provides consistently reproducible contact points for go/no‑go checks and end‑measurements. The defined 15.01 mm diameter combined with a ±0.002 mm manufacturing tolerance reduces measurement uncertainty and supports repeatable results on gauges, comparators and fixture checks. This level of accuracy is particularly suitable where small deviations can affect assembly fits or functional clearances; the pin therefore serves as a reliable master for routine inspection routines and short‑run quality control. Built for workshop durability and handling comfort The pin is formed from special steel and finished in a workshop‑grade execution to withstand repeated use. A 50 mm shank length ensures stable seating in inspection fixtures while remaining easy to handle during frequent checks. The single‑piece design minimises potential play between components and simplifies storage and handling in a busy production environment. These attributes translate into less downtime for replacements and a reduced risk of damage-induced measurement drift, supporting continuous production flows. Traceability and straightforward integration into inspection workflows Marked by GTIN and article references, the component is ready for catalogue integration and inventory control; traceability supports quality documentation and audit trails. The compact geometry allows rapid use with depth gauges, micrometers and comparator setups, making it a practical choice for machine shops and quality labs that require fast, repeatable comparative measurements. For specific fixture compatibility or batch requirements Metav Werkzeuge can advise on matching reference tools and supply logistics. Contact Metav Werkzeuge for advice on specifying the M323.F01 gauge pin and to arrange supply direct from Emmerich for reliable delivery and quality assurance Technical data Article number: M323.F01 GTIN: 4061905067396 eClass: 21170231 Label: Gauge pin, single, 15.01 mm × 50 mm Facts Diameter: 15.01 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Material: Special steel Version: Workshop execution Supply: Single gauge pin Accuracy class: ±0.002 FAQ What tolerance does the pin provide? The pin is manufactured to a tolerance of ±0.002 mm, which makes the M323.F01 suitable for reference and inspection tasks requiring tight dimensional control. Which materials can be inspected with this pin? The gauge pin itself is made from special steel; it is intended as a dimensional reference and is suitable for use with components made of common workshop materials when used as a master or checking element. How is the item supplied? The product is supplied as a single gauge pin under article number M323.F01 and can be ordered with GTIN 4061905067396 for inventory purposes. Can this pin be used in fixture checks and comparator setups? Yes, the compact geometry and precise diameter make it well suited for comparator seating, fixture alignment and go/no‑go reference checks in workshop and inspection stations. Is the part traceable for quality documentation? Traceability is supported via the GTIN and article number; Metav IndustryLine documentation can be provided to assist with quality records and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.02mm Test Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the workshop‑grade robustness, ±0.002 mm tolerance and compact 50 mm measuring length for repeatable end‑dimension checks; order directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin, single — 15.02 mm diameter, 50 mm length (Metav IndustryLine M323.F02) The gauge pin, single, 15.02 mm diameter, 50 mm length is a workshop‑grade inspection pin designed for precise end‑dimension verification and fixture checking in production and assembly environments. Workshop version for daily use Nominal diameter 15.02 mm ±0.002 mm Compact 50 mm measuring length Supplied in a transport case Reliable dimensional control for rapid inspection This compact gauge pin is specified for consistent end‑dimension checks where short, repeatable measurements are required. With a nominal diameter of 15.02 mm and a documented deviation of ±0.002 mm, the pin supports fine tolerance verification during incoming inspection, fixture set‑up and spot checks on the shop floor. The precision tolerance reduces uncertainty in pass/fail decisions and shortens inspection cycles, delivering measurable efficiency gains in routine quality control. Material choice and mechanical durability Constructed from special steel in a workshop configuration, the measuring pin combines mechanical stability with wear resistance suitable for repeated contact checks. The solid construction and balanced mass (approx. 0.1 kg) make the pin easy to locate and position while resisting the deformation that can compromise short‑length measurements. This material selection prioritises longevity and keeps replacement intervals low, which supports predictable maintenance planning in production environments. Designed for handling and safe storage At 50 mm overall length the pin is compact enough for quick one‑hand placement yet long enough to reach recessed features in many assemblies. The supplied transport case protects the pin during storage and transit and helps maintain the measuring surface condition between uses. The workshop execution emphasises practical aspects: robust handling, clear identification and straightforward storage to keep inspection routines swift and reliable. Fits into established inspection workflows The M323.F02 measuring pin is suitable as a standardised reference for end‑measure checks and fixture validation; it integrates easily into existing inspection jigs and comparative gauges. Labelling and SKU traceability support inventory control and process documentation, while the straightforward geometry minimises operator training. As part of Metav IndustryLine, this measuring pin benefits from the manufacturer’s focus on accessible precision and consistent supply for industrial customers. For dependable end‑dimension verification, request the M323.F02 from Metav Werkzeuge in Emmerich or contact our consultants for tailored application guidance Technical data SKU: M323.F02 GTIN: 4061905067402 Description: Gauge pin, single, 15.02 mm diameter, 50 mm length Manufacturer: Metav IndustryLine Facts Diameter: 15.02 mm Length: 50 mm Tolerance / deviation: ±0.002 mm Weight: 0.1 kg Special features Workshop version Material: special steel Supplied in a transport case Category: Gauge pins (Messstifte) FAQ What is the measurement tolerance of this gauge pin? The M323.F02 gauge pin is manufactured to a deviation of ±0.002 mm, making it suitable for fine tolerance end‑dimension checks. How is the pin delivered and stored? The Metav IndustryLine pin is supplied in a transport case to protect the measuring surfaces during storage and transport. What applications is this measuring pin intended for? This inspection pin is intended for end‑dimension verification, fixture checking and short‑range reference measurements in production and assembly workflows. How can the product be identified for reordering? Reference the SKU M323.F02 or the GTIN 4061905067402 when reordering the Metav IndustryLine gauge pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.03mm Gauge Pin, Single, 50mm Length, Workshop Version - Metav IndustryLine
The combination of ±0.002 mm repeatability, 15.03 mm diameter and robust special steel construction ensures reliable end‑measure checks in workshop environments; order the gauge pin directly via Metav Werkzeuge or consult Metav's specialists for integration advice. Gauge pin, single, 15.03 mm — 50 mm length (Metav IndustryLine, workshop version) A gauge pin, single, 15.03 mm (length 50 mm) designed for precise end‑measure control and go/no‑go checking in production and maintenance settings. Workshop version for everyday use Diameter 15.03 mm for end‑measure checks Tolerance ±0.002 mm for high repeatability 50 mm overall length with sturdy construction Precision that protects quality and reduces rework This gauge pin delivers ±0.002 mm dimensional fidelity, providing a measurable improvement in inspection consistency compared with coarse gauges. The pin's nominal diameter of 15.03 mm is matched to tight tolerances, making it suitable for final checks, alignment tasks and calibration routines where even small deviations lead to costly rework. Thanks to the compact length of 50 mm, the probe is simple to handle while still offering enough engagement for reliable go/no‑go assessments; the result is a faster quality loop and fewer scrapped parts. Durable material and workshop suitability Manufactured from special steel, the probe combines surface hardness with resistance to wear in routine shop use. The Workshop version construction focuses on robustness: contact faces are ground for repeatable seating and the body resists damage from incidental knocks and handling. This material choice maintains a stable diameter over time, so measurement drift is minimised and replacement intervals are extended—an economical choice for busy inspection benches and on‑machine checks. Practical use and integration into inspection workflows The pin is sized for direct insertion checks and end‑dimension verification in fixtures and nests, and it fits common pin holders and gauge sets. Its compact form facilitates handheld verification as well as use in jigs when a quick go/no‑go decision is required. By standardising on a repeatable gauge with a declared tolerance, inspection protocols become more defensible and traceable—improving audit readiness and production confidence. The combination of robustness and precision supports lean workflows and reduces stoppages due to ambiguous measurements. Discuss integration with Metav Werkzeuge for tailored inspection solutions — Metav IndustryLine items like this gauge pin (SKU M323.F03) can be specified for production or maintenance work; email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange technical alignment Technical data Article number: M323.F03 GTIN: 4061905067419 Manufacturer: Metav IndustryLine Facts Diameter: 15.03 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg ECLASS: 21170231 Special features Material: special steel Workshop version (robust construction) Single gauge pin for end‑measure checking Story trigger: end measures (endmasse) FAQ Is this gauge pin suitable for go/no‑go checks on shafts and bores? Yes. The Metav IndustryLine gauge pin (SKU M323.F03) with 15.03 mm diameter and ±0.002 mm tolerance is intended for go/no‑go and end‑measure verification on shafts, bores and mating features. Can the pin be used for repeated in‑machine checks? Repeated checks are feasible; the gauge pin's special steel construction and workshop specification are chosen to withstand routine handling and in‑machine use while maintaining dimensional stability. How is the accuracy specified verified? The declared ±0.002 mm tolerance is the manufacturing specification for the gauge pin. For traceable calibration certificates or batch verification, Metav Werkzeuge can advise on available calibration services and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.04mm Gauge Pin Single, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of precision at ±0.002 mm, a 15.04 mm diameter and rugged workshop construction for reliable fit checks and reduced rework. Order the pin directly through Metav Werkzeuge or consult our team for application advice. Gauge Pin, Single 15.04 mm – 50 mm Length (Metav IndustryLine) The Gauge Pin, single 15.04 mm is a workshop-grade reference pin intended for dimensional checks, assembly inspection and go/no‑go verification in metrology and production settings. Workshop-grade design for robust use Diameter 15.04 mm with ±0.002 mm tolerance 50 mm special-steel body for stable handling Supplied in transport box for safe handling Precision that protects production quality A reference pin with a 15.04 mm nominal diameter and an indicated ±0.002 mm variation provides a reliable benchmark for fit and clearance checks. The tight tolerance reduces ambiguous results during inspection, which in turn lowers the rate of rework and scrap. By specifying a measured component with such accuracy, process control becomes more consistent: inspection decisions are based on clear numerical limits rather than visual approximation. The result is measurable time savings in the quality loop and a lower risk of downstream assembly issues. Durable workshop design for everyday handling Built as a workshop-grade tool from special steel, the pin combines practical robustness with the fine geometry required for repeatable assessments. A 50 mm length balances handling comfort and functional engagement in fixtures or bores, while the compact mass supports easy placement and withdrawal during quick checks. Because the item is supplied in a transport box, the reference surface and nominal diameter remain protected in storage and transit, preserving the measurement quality over repeated use and reducing the likelihood of damage that could invalidate inspection results. Simple integration into inspection workflows As a single gauge pin, this product is suited for inclusion in inspection trays, plug‑gauge sets or as a spare reference for calibration benches. The clear nominal size and documented tolerance allow planners to define pass/fail criteria without ambiguity, facilitating faster go/no‑go decisions at the workbench. Traceable identifiers such as the SKU and GTIN support inventory control and versioning in quality documentation. For production teams seeking fast measurable improvements in throughput and fewer ambiguous checks, the pin offers a compact, low‑effort upgrade to existing metrology routines. Contact Metav Werkzeuge for technical matching, delivery options and to secure this workshop-grade gauge pin: info@metav-werkzeuge.com | +49 2822 7131930 — Metav Werkzeuge can advise on integration and supply from Emmerich. Technical data Article number: M323.F04 GTIN: 4061905068362 Brand: Metav IndustryLine Facts Diameter: 15.04 mm Length: 50 mm Accuracy: ±0.002 mm Weight: 0.1 kg Category: Gauge pins Materials & features Material: Special steel Version: Workshop execution Delivery: Transport box supplied Label: Gauge pin, single 15.04 mm FAQ Is the diameter tolerance suitable for precision assembly checks? The stated tolerance of ±0.002 mm makes the gauge pin suitable for fine fit and clearance assessments where tight dimensional control is required. What material is the pin made from and how does that affect wear? The pin is manufactured from special steel, chosen for dimensional stability and wear resistance under routine workshop use. Can this single pin be used as a replacement in existing gauge sets? Yes. The single gauge pin is intended for use as a reference or replacement element within plug‑gauge sets and inspection trays. How is the pin delivered to protect its measuring surfaces? Delivery includes a transport box to protect the pin during handling and storage, helping to preserve the reference surfaces. Is the product suitable for production line spot checks? Its compact form, clear nominal size and tight tolerance make the pin well suited for frequent spot checks and quick go/no‑go decisions Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.05mm Gauge Pin 50mm Length Workshop Finish - Metav IndustryLine
Take advantage of the combination of workshop‑grade robustness, exacting ±0.002 mm tolerance and compact dimensions for dependable bore checks; order the gauge pin directly via Metav Werkzeuge or consult our specialists for batch requirements. Gauge pin, single, 15.05 mm × 50 mm (Metav IndustryLine) Gauge pin, single, 15.05 mm diameter and 50 mm length for precise plug checks and dimensional verification in workshop metrology Workshop-grade construction Diameter 15.05 mm for tight fits Length 50 mm for bore depth control Tolerance ±0.002 mm for high repeatability Accurate checks that reduce rework The compact gauge pin provides a simple, reliable means of confirming bore sizes and fit tolerances in serial production and setup routines. With a nominal diameter of 15.05 mm and a verified variation of ±0.002 mm, the pin supports fast go/no‑go-style assessments that minimise measurement guesswork and costly rework. The tight specification improves process control by making deviations immediately visible in routine checks, so inspection steps become a time‑efficient quality gate rather than a bottleneck. The precision achieved here is particularly valuable when consistent part interchangeability is required across multiple machines or shifts. Built for everyday workshop use Manufactured in special steel and offered in a workshop configuration, this test pin is designed to withstand frequent handling and direct use at the bench. The 50 mm length gives an effective contact surface for depth‑related checks without compromising manoeuvrability in confined setups. At approximately 0.1 kg, the component is easy to position yet sufficiently hefty to feel robust in use. The straightforward single‑piece design simplifies storage in inspection sets and reduces the number of handling steps during routine dimensional checks, supporting a smoother workflow on the shop floor. Integration into inspection routines and traceability The Metav IndustryLine gauge pin is suitable for repetitive verification tasks and can be incorporated into workholding and fixture checks as a reference artefact. Marked with the item identifier M323.F05, the pin is easy to log into inspection lists and tool inventories, helping to maintain traceability across production batches. Using a dedicated pin for repetitive gauging promotes consistent repeatability between operators and shifts, enabling clearer statistical process control and fewer ambiguous measurement results. For procurement, the clear article identification supports fast replenishment and inventory planning. Contact Metav Werkzeuge for availability, batch supply options and technical advice on the Metav IndustryLine gauge pin M323.F05 Technical Data SKU: M323.F05 GTIN: 4061905068379 Brand: Metav IndustryLine Core specifications Diameter: 15.05 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Special features Workshop version Material: Special steel Single test pin Category: Gauge pins FAQ What is the primary use of this gauge pin? The gauge pin M323.F05 from Metav IndustryLine is intended for plug‑gauge style checks, bore verification and quick dimensional confirmation in workshop and production environments. What accuracy does the pin deliver? The test pin is specified to ±0.002 mm, a tolerance that supports reliable pass/fail assessments and improved repeatability in routine inspections. What material and construction can be expected? The component is made from special steel in a workshop configuration, providing robustness for frequent handling and stable dimensional behaviour under normal shop conditions. How is the article identified for inventory and procurement? The item is listed as SKU M323.F05 and GTIN 4061905068379, simplifying inventory tracking and reordering for inspection sets. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15.06 mm Gauge Pin, Single, 50 mm Length, Workshop Version - Metav IndustryLine
Benefit from precise diameter control and robust workshop‑grade construction: the combination of ±0.002 mm tolerance and special steel material delivers repeatable end‑dimension checks and long service life. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin, single – 15.06 mm Ø, 50 mm length (Metav IndustryLine) Gauge pin, single – 15.06 mm Ø, 50 mm length is a workshop‑grade reference pin intended for end‑dimension verification, fixture setting and production inspection tasks Workshop‑grade execution Diameter 15.06 mm for end‑dimension checks Tolerance ±0.002 mm Material: special steel, precision ground Consistent reference for dimensional checks A precision gauge pin provides a stable reference when verifying bore diameters, setting fixtures or checking mating parts. The specified 15.06 mm diameter combined with a tight ±0.002 mm tolerance reduces measurement uncertainty and supports reproducible go/no‑go assessments on the shop floor. Manufactured as a single, precision‑ground pin, this reference tool minimises the need for iterative adjustments and helps maintain throughput by cutting inspection time. Practical format for workshop use With a nominal 50 mm overall length, the pin balances reach and handling for typical workshop operations: long enough to engage bore seats and short enough for safe one‑hand positioning. The special steel construction offers wear resistance suitable for repeated seating and gentle knocking into fixtures, preserving dimensional fidelity over prolonged use. The compact weight and robust finish make the pin straightforward to integrate into fixture sets, pin stacks or portable inspection kits. Integration into quality processes and procurement Supplied as a single, workshop‑oriented reference pin from the Metav IndustryLine, this item supports routine process control and small‑series inspection tasks. The clear specification and industrial material choice facilitate procurement and spare‑part planning, while the precision class helps to reduce scrap and rework through reliable first‑pass verification. For manufacturers and machinists seeking a pragmatic balance of accuracy and durability, this gauge pin contributes to consistent production quality and smoother inspection workflows. Contact Metav Werkzeuge in Emmerich for tailored advice and supply of this Metav IndustryLine gauge pin — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M323.F06 GTIN: 4061905068386 Manufacturer: Metav IndustryLine Measurements Diameter: 15.06 mm Length: 50 mm Tolerance: ±0.002 mm Weight: 0.1 kg Materials & Features Material: special steel Workshop‑grade execution Category: gauge pin (Messstifte) FAQ What is the declared tolerance of this gauge pin? The gauge pin is specified with a tolerance of ±0.002 mm, ensuring tight dimensional control for reference measurements. Which material is used for the pin? The pin is manufactured from special steel, chosen for wear resistance and dimensional stability under workshop conditions. Is this pin suitable for fixture setting and bore checks? Yes, the 15.06 mm diameter and 50 mm length make this pin well suited for fixture alignment, bore verification and end‑dimension checks in production environments. How is the item delivered and identified? The product is listed as SKU M323.F06 and GTIN 4061905068386 for clear identification during procurement and inventory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com