Precise pin gauges for reliable bore and tolerance checking
Pin gauges are tactile, high-precision gauges used for exact bore, internal thread and radius inspection, offering straightforward go/no-go verification and process-secure dimensional control in toolmaking and quality assurance. Made from hardened gauge steel, wear-resistant ceramic or carbide and finely lapped for superb surface finish, these gauges deliver micrometre-level accuracy and long service life while eliminating electronic error sources. Available as individual pins or complete sets in wooden cases, they support tasks such as measuring bore spacing, checking tapers and setting reference sizes for indirect measuring devices and come in strict tolerance classes compliant with industrial standards.
3.41mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version, Supplied in Case - Metav IndustryLine
Take advantage of the precision of a micrometric inspection pin combined with robust special‑steel construction and a handy 50 mm length for reliable end‑dimension checks. Benefit from workshop‑grade durability and traceable identification for consistent quality control — order directly via Metav Werkzeuge or consult our specialists for application advice. M323.341 Probe pin, 3.41 mm — ±0.001 mm, 50 mm length (Metav IndustryLine) A M323.341 probe pin designed for high‑precision end‑dimension checks and comparator fixtures in workshop and inspection environments High‑precision ±0.001 mm tolerance Special steel construction for wear resistance Compact 50 mm length for confined fixtures High precision for critical end‑measurements The core advantage of this inspection pin is its ±0.001 mm tolerance, which corresponds to 1 µm resolution and supports applications that demand sub‑micrometre repeatability. Such accuracy positions the pin within high‑precision inspection tasks where consistent reference surfaces and end‑dimension verification are required. The short, rigid geometry reduces elastic deformation during measurement, helping to maintain reproducible results when mounted in gauge blocks, comparator fixtures or probe arrays. Workshop‑ready design that eases handling and longevity Manufactured in special steel, the pin combines surface hardness with corrosion resistance appropriate for frequent use in industrial shop floors. The workshop version designation signals practical robustness: the component tolerates routine handling and fixturing without compromising geometric integrity. At a nominal mass of 0.006 kg and with a 50 mm overall length, the pin is compact enough for confined setups yet long enough to project clearly from retainers or bushings, improving visibility and alignment during inspection sequences. Clear identification and integration into quality workflows Traceability is supported by the product identifiers and classification for straightforward inventory and procurement. The component is catalogued as a precision probe pin suitable for end‑dimension testing and fits established metrology practices for comparator and fixture use. Integration into standardised inspection routines reduces measurement variance and shortens setup time, delivering a measurable productivity gain for repetitive quality checks in production and maintenance environments. The M323.341 designation and GTIN facilitate ordering and stock management within existing tool fleets and quality documentation systems. For precise end‑measurement solutions from Metav IndustryLine, request the M323.341 probe pin via Metav Werkzeuge for direct supply and expert application guidance Technical data Article number: M323.341 GTIN: 4061905058097 SKU: M323.341 Weight: 0.006 kg Material: Special steel Dimensions & accuracy Diameter: 3.41 mm Length: 50 mm Tolerance: ±0.001 mm Measurement range: 3.41 mm Features & application Workshop version Category: Probe pins (Messstifte) Intended use: End‑dimension checks, comparator fixtures ECLASS: 21170231 FAQ What level of accuracy does this probe pin provide? The M323.341 probe pin delivers an accuracy of ±0.001 mm (1 µm), suitable for high‑precision end‑dimension checks and comparator applications. Can the pin be used in comparator fixtures and gauge blocks? Yes, the probe pin is designed for use in comparator fixtures and gauge arrangements where short, rigid reference pins are required. Which material is used for the pin and what does that mean for wear? The component is manufactured from special steel, offering improved wear resistance and durability for regular workshop use. How is the component identified for ordering and stock control? The item is listed as M323.341 with GTIN 4061905058097 for straightforward procurement and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.42mm Test Pin Length 50mm ±0.001 mm, Workshop Version - Metav IndustryLine
Combine high-precision tolerance ±0.001 mm, robust special steel construction and a dedicated transport box to ensure repeatable end-dimension checks; order the gauge pin directly via Metav Werkzeuge or consult the specialists for application advice. Gauge pin M323.342 — workshop test pin, 3.42 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) The gauge pin M323.342 serves as a compact, workshop-grade reference pin for end-dimension and bore verification, designed for repeatable checks where tight fit and reproducibility are essential Diameter 3.42 mm, tolerance ±0.001 mm Length 50 mm for deeper measurements Special steel construction for durability Workshop version with transport box Consistent measurement for critical fits The core advantage is the accuracy: a declared tolerance of ±0.001 mm makes this pin suitable for verification tasks where small deviations matter. As a hardened, single test pin it provides a fixed reference point for go/no-go assessments, bore checking and end-dimension control. The precise diameter specification (3.42 mm) reduces uncertainty in assembly and inspection routines, supporting faster decision-making and fewer rework cycles. Using a discrete reference pin simplifies traceability during routine quality checks and complements dial gauges or micrometres for cross-verification. Robust design for everyday workshop use Built in special steel and offered in a workshop execution, the pin resists wear from repeated insertion and handling while remaining easy to store and transport. The 50 mm length gives enough reach for moderate-depth bores without compromising stiffness, and the light mass (approx. 0.006 kg) ensures convenient handling during busy inspection sequences. Delivery includes a transport box to protect the datum surface during transit; this reduces risk of nicks and helps maintain the specified diameter tolerance over time, preserving the pin’s functional life and measurement reliability. Practical benefits and integration into inspection routines In practice, the pin functions as a simple and effective tool for end-dimension checks, plug gauging and quick bore verification. It integrates with standard inspection benches and is particularly useful where clear, repeatable reference sizes are required for assembly checks or incoming inspection. The compact form factor and workshop focus make it a reliable addition to a quality toolbox, while the clear specification supports procurement and inventory management. Selecting such a reference element from a dependable supplier ensures consistent results across shifts and operators. Contact Metav Werkzeuge for tailored application guidance and to secure the gauge pin M323.342 for dependable end-dimension verification — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: M323.342 GTIN: 4061905058103 Manufacturer: Metav IndustryLine Facts Diameter: 3.42 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.006 kg Special features Workshop execution Delivered in transport box for protection Material: Special steel Suitable for end-dimension checks FAQ What tolerance does this gauge pin offer? The gauge pin M323.342 is specified with a tolerance of ±0.001 mm, suitable for tight inspection tasks. Which material is used for the pin? The pin is manufactured from special steel, providing wear resistance for repeated insertion and handling. Is the pin suitable for bore and end-dimension checks? Yes, the M323.342 gauge pin from Metav IndustryLine is intended for end-dimension verification and plug gauging tasks in workshop inspection routines. How is the pin delivered and protected? Delivery includes a transport box to protect the datum surfaces during transit and storage. What identifiers are available for procurement? Refer to SKU M323.342 and GTIN 4061905058103 when ordering or checking stock. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.43mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm accuracy, a 3.43 mm diameter and a compact 50 mm length for reliable end‑measure verification in workshop environments — order the gauge pin directly via Metav Werkzeuge or request expert advice from our consultants. M323.343 gauge pin (3.43 mm) — ±0.001 mm tolerance, 50 mm length by Metav IndustryLine M323.343 is a precision gauge pin designed for end‑measure inspections and tight‑fit checks in workshop applications High-precision ±0.001 mm tolerance Diameter 3.43 mm, ground for close tolerances 50 mm length suitable for end‑measure checks Workshop-grade special steel construction Ensure repeatable dimensional control with micrometre-level accuracy The gauge pin delivers a guaranteed ±0.001 mm tolerance that supports high‑precision verification of bore diameters and mating parts. Such an exacting tolerance reduces measurement uncertainty in production and quality control routines, enabling decisive go/no‑go judgements at the bench. Because the pin is produced in a workshop version, the design balances surface finish and robustness to withstand frequent handling while preserving tight tolerances during repetitive use. Compact form factor that fits inspection jigs and fixtures With a 3.43 mm diameter and 50 mm length, the inspection pin is compact enough to be integrated into existing gauges and test rigs without additional modification. The short, stiff profile minimises bending and wobble during insertion, providing a stable reference for end‑measure checks and plug gauge applications. This geometry is especially beneficial where confined access or stacked assemblies require a reliable reference pin for alignment or sizing. Material and construction supporting workshop durability Manufactured from special steel, the pin is specified for workshop environments where mechanical resilience and dimensional stability are required. The material selection emphasises resistance to wear during repeated engagement, ensuring the pin remains a dependable reference over many cycles. As a workshop-grade item, it is suited for daily use on production floors and in inspection areas where handling and tool changes are frequent. Practical benefits for production and inspection workflows Using a dedicated gauge pin for end‑measure verification shortens inspection times and clarifies acceptance criteria at the point of measurement. The combination of precision and compactness means fewer reworks and a faster throughput in processes that rely on accurate mating fits. In addition, the clearly defined geometry simplifies documentation and traceability in quality records, making the component a pragmatic choice for standardised inspection procedures. Contact Metav Werkzeuge today to discuss batch supply, custom labelling or integration options for the Metav IndustryLine gauge pin M323.343 and secure consistent dimensional control on the shop floor Technical data Article number: M323.343 GTIN: 4061905058110 Label: Prüfstift, einzeln, 3,43mm, +/- 0.001 mm Länge 50 mm Brand: Metav IndustryLine Core measurements Diameter: 3.43 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.006 kg Special features Material: special steel Workshop version Intended for end‑measure checks Single gauge pin delivery FAQ What tolerance does the gauge pin offer? The gauge pin is specified with a ±0.001 mm tolerance, suitable for high‑precision measurement and verification tasks. Which dimensions define this inspection pin? The M323.343 gauge pin measures 3.43 mm in diameter and 50 mm in length, designed for compact inspection setups. What material is the pin made from? This Metav IndustryLine pin is made from special steel, selected for durability under frequent workshop use. Is the pin suitable for plug gauge and end‑measure checks? Yes — the geometry and tolerance of the M323.343 make it appropriate for plug gauge applications and end‑measure verification. How is the product identified for procurement or records? Use the article number M323.343 and GTIN 4061905058110 for ordering and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.44mm Gauge Pin, ±0.001 mm Accuracy, 50mm Length, Workshop Version, Special Steel - Metav IndustryLine
Benefit from micrometre‑level accuracy, robust special‑steel construction and a compact 50 mm length that support repeatable end‑measure checks and reduce rework. Order this gauge pin directly via Metav Werkzeuge or consult our specialists for application guidance. Gauge pin M323.344 – single gauge pin, 3.44 mm diameter, ±0.001 mm tolerance (Metav IndustryLine) A Gauge pin M323.344 designed for precise end‑measure verification in inspection fixtures and routine quality checks across workshops and production lines ±0.001 mm high-precision tolerance 3.44 mm ground diameter 50 mm compact length Workshop‑grade special steel construction Micrometre‑level accuracy for reliable pass/fail checks The gauge pin is ground to a nominal 3.44 mm diameter with a tight ±0.001 mm tolerance, which translates into highly repeatable reference points for bore and end‑measure verification. Such close tolerances are valuable where small deviations lead to assembly issues or scrap; because the pin’s geometric accuracy is controlled, setting and checking operations become more predictable and less prone to operator‑induced variance. The result is a measurable reduction in inspection time and fewer unnecessary adjustments on the production line while maintaining traceable measurement quality. Durable workshop design and safe transport Produced in special steel and specified as a Workshop version, the pin is intended to withstand regular handling and the demands of everyday inspection tasks. Its 50 mm overall length balances reach with rigidity, making it easier to use in fixtures and on gauging benches. Delivered in a protective case for transport, the component arrives ready for storage and site use; the case reduces transit damage and keeps the reference surface free from contamination, preserving accuracy between uses and inspections. Practical applications and workflow benefits This precision pin is suited for end‑measurements, quick bore checks, fixture alignment and repeatable go/no‑go references within inspection routines. Its compact form and workshop specification mean it integrates well into small gauge sets and larger inspection jigs alike, providing a dependable physical reference for dimensional control. By standardising a single, high‑accuracy datum, measurement processes become faster and more consistent, supporting leaner quality procedures and reducing stoppages caused by ambiguous fits or uncertain clearances. For consistent end‑measure checks and robust workshop performance, rely on Metav IndustryLine’s gauge pin M323.344 — contact Metav Werkzeuge for application advice or to arrange delivery from Emmerich. Technical Data Article number: M323.344 GTIN: 4061905058127 Label: Gauge pin, single, 3.44 mm, ±0.001 mm, length 50 mm Brand: Metav IndustryLine Core measurements Diameter: 3.44 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.006 kg Design & applications Material: special steel Workshop version Delivered in protective case for transport Intended for end measurements and inspection fixtures FAQ What is the declared tolerance for this gauge pin? The gauge pin M323.344 from Metav IndustryLine is specified with a tolerance of ±0.001 mm, suitable for high‑precision end‑measurement and reference checks. Which diameter and length are provided? This single gauge pin has a ground diameter of 3.44 mm and an overall length of 50 mm, making it compact yet rigid for fixture and bore applications. Is the pin suitable for regular workshop use and transport? Yes. The component is a workshop version manufactured from special steel and is supplied in a protective case to reduce transit damage and contamination during storage. Does the product include a calibration certificate? No calibration certificate is listed with the product data; calibration services can be commissioned separately if traceable certification is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.45mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from the combination of ±0.001 mm accuracy, a compact 3.45 mm diameter and a robust special steel construction in a 50 mm workshop format for reliable end measurements; order the gauge pin directly via Metav Werkzeuge or consult the specialists for application advice. Gauge pin M323.345 — single precision test pin, 3.45 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.345 is a single precision test pin intended for accurate end‑measure checks and reference tasks in workshop inspection and fixture setup. Workshop design for everyday shop use Diameter tolerance ±0.001 mm for high precision Compact 50 mm length for end measurements Supplied in a transport box for secure handling Accurate, repeatable end‑measurements for quality control The core advantage of this test pin is its high dimensional accuracy: ±0.001 mm nominal deviation guarantees repeatable reference points for production inspection. Such a fine tolerance reduces measurement uncertainty when checking bore sizes, alignment dowels and end masses, supporting efficient pass/fail decisions on the shopfloor. The small diameter and tight tolerance make this item suitable where tight-fitting checks and plug‑gauge comparisons are required, translating directly into fewer reworks and clearer acceptance criteria. Robust workshop construction and compact handling Constructed from special steel and specified as a workshop version, the pin is engineered for everyday handling and insertion cycles. The 50 mm length provides a practical reach for many standard fixtures while remaining easy to manoeuvre by hand or in simple clamping jigs. The compact form factor minimises lever arm effects and helps maintain alignment during repeated use; the low mass (approx. 0.006 kg) also contributes to gentle handling in delicate assemblies. Practical integration into inspection routines Designed as a single reference element, the pin suits a wide range of tasks such as bore verification, gauge set complements and alignment checks. Its nominal diameter of 3.45 mm and defined end condition make it straightforward to incorporate into existing plug‑gauge sets or bespoke inspection fixtures. The clear, measurable specification simplifies documentation in quality records and allows quick comparison with drawing tolerances when used as a go/no‑go or reference feature. Reliable supply and workshop support from Metav IndustryLine The item is supplied in a secure transport case, ensuring safe delivery and reducing the risk of damage in transit. As part of the Metav IndustryLine range, the product benefits from the supplier’s emphasis on dependable availability and practical selection for industry and trade. The visible identifiers, including SKU and GTIN, facilitate traceability in purchasing and stock management while the workshop specification highlights an emphasis on durability and everyday usability. Contact Metav Werkzeuge for availability and tailored advice on the Metav IndustryLine gauge pin M323.345 and related inspection accessories Technical data Article number: M323.345 GTIN: 4061905059056 Label: Gauge pin, single, 3.45 mm, ±0.001 mm, length 50 mm Facts Diameter: 3.45 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.006 kg Special features Material: Special steel Workshop version Supplied in transport box eClass: 21170231 FAQ What applications suit this gauge pin? The gauge pin M323.345 is intended for precise end‑measure checks, bore verification and use as a reference in inspection fixtures and plug‑gauge complements. Is the ±0.001 mm tolerance suitable for routine inspection tasks? Yes; the ±0.001 mm specification positions the pin for high‑precision checks where micrometre‑level repeatability is required, such as fine mechanical assemblies and tight‑fit components. What material is used and how does it affect durability? The test pin is made from special steel, providing workshop‑grade durability appropriate for frequent insertion and reference use. How is the item packaged for transport? The gauge pin is supplied in a transport box to protect the finished surface and maintain accuracy during shipping and storage. Which identifiers help with traceability? The product is listed as SKU M323.345 with GTIN 4061905059056 for straightforward stock and procurement tracking. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.46mm Test Pin ±0.001 mm Length 50 mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm accuracy, a 3.46 mm diameter and a robust 50 mm length for consistent end‑measurement results; order the gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Gauge pin M323.346 (Metav IndustryLine) — 3.46 mm, ±0.001 mm accuracy The gauge pin M323.346 is a single precision measurement pin designed for end‑measurement and inspection tasks in workshop and production environments. Precision tolerance ±0.001 mm Diameter 3.46 mm for fine end gauges 50 mm hardened special steel body Supplied in protective transport case Reduce rework with verifiable precision A tight tolerance of ±0.001 mm delivers measurable benefits in quality assurance: fewer false rejects, faster go/no‑go decisions and reduced rework. The small diameter of 3.46 mm specialises the pin for fine end‑measurements where minimal contact area and high reproducibility matter. This level of precision supports reliable conformity checks and shortens inspection cycles without sacrificing confidence in measurement results. Built for daily workshop use With a 50 mm body forged from special steel, the pin is engineered to withstand repeated handling and the knocks of a busy shop floor. The workshop version designation reflects a focus on robustness and straightforward maintenance: corrosion resistance and dimensional stability combine to keep the gauge serviceable over many inspection runs. The compact mass (approx. 0.006 kg) also aids agile handling during frequent checks. Practical handling that speeds inspection Delivered in a protective transport case, the pin remains protected during storage and transfer — reducing downtime caused by damage or surface contamination. The slim profile and consistent geometry allow quick placement into fixtures or gauges, enabling efficient in‑process checks. The design therefore not only ensures reliable measurements but also contributes to smoother inspection workflows and better utilisation of measuring personnel. Traceability and workshop integration Marked with SKU M323.346 and GTIN 4061905059063, the item is ready for inventory management and documentation in quality records. As an end‑measurement tool the pin is suitable for integration in manual gauges and fixture checks where small diameters and high repeatability are required. The combination of product identification and compact form factor simplifies logistics and traceability within production and QA systems. For precise end‑measurement requirements, contact Metav Werkzeuge for availability and expert advice on the Metav IndustryLine gauge pin. Technical data Article number: M323.346 GTIN: 4061905059063 Category: Gauge pins / Messstifte Facts Diameter: 3.46 mm Length: 50 mm Tolerance / Accuracy: ±0.001 mm Weight: 0.006 kg Special features Material: Special steel Version: Workshop execution Delivery: Protective transport case FAQ What tolerance can be expected from this gauge pin? The gauge pin is specified with a tolerance of ±0.001 mm, which supports high‑precision end‑measurement tasks with reproducible results. Is the gauge pin suitable for daily shop use? Yes — the M323.346 from Metav IndustryLine is a workshop version made from special steel and supplied in a protective case for everyday inspection routines. Can this pin be used in fixtures and manual gauges? The compact diameter and consistent geometry make the pin appropriate for integration into manual gauges and dedicated fixtures for end‑measurements. How is the product identified for stock and quality records? The item carries SKU M323.346 and GTIN 4061905059063 to simplify inventory management and traceability in quality documentation. What benefits does the protective case provide? The transport case protects the pin from damage and contamination, helping preserve surface condition and dimensional integrity between uses. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.47mm Gauge Pin, Accuracy ±0.001mm, Length 50mm, Workshop Version, Special Steel - Metav IndustryLine
Take advantage of the combination of industrial robustness, ±0.001 mm accuracy and compact dimensions for reliable inspection results; order the test pin directly from Metav Werkzeuge or consult our advisors for application advice. Test pin M323.347 — Metav IndustryLine precision inspection pin, Ø 3.47 mm, ±0.001 mm A Test pin M323.347 designed for precise end‑measurement and go/no‑go checks in workshop metrology and inspection fixtures. Workshop version for robust use Diameter 3.47 mm for tight gauges Tolerance ±0.001 mm for high precision Length 50 mm, stable handling Precision that reduces inspection uncertainty The core advantage of this inspection pin is its ±0.001 mm nominal tolerance, which places it in the high‑precision class for workshop measurement aids. Such a fine tolerance reduces uncertainty when verifying mating bores or plug gauges, improving decision confidence during quality checks. By using a compact diameter of 3.47 mm, the pin is suitable for tight reference checks and fine fitting operations; the small form factor supports repeatable seating in fixtures and minimises the risk of misalignment. The result is fewer false rejects and a more efficient inspection routine driven by objective, measurable data. Built for the workshop: robust material and handling Manufactured in special steel and supplied in a workshop version, the component balances corrosion resistance and wear performance for routine use under industrial conditions. The 50 mm length gives a manageable working clearance while maintaining stiffness for hand‑held and fixture‑mounted checks. At an approximate mass of 0.006 kg the item is easy to position yet stable enough to avoid wobble that can compromise a measurement. The robust construction reduces downtime from tool failure and supports continuous operation in busy production environments. Integrates into inspection workflows and speeds up decision making This precision pin is intended for straightforward integration into existing inspection setups and controllers where small‑diameter reference elements are required. Its dimensional specification and compact geometry make it compatible with plug gauges, hardened fixture blocks and simple go/no‑go assemblies. By delivering consistent contact points and low measurement scatter, the component helps to shorten inspection cycles and lower rejection rates. Emphasising measurable outcomes, the pin supports a rational, efficiency‑focused approach to quality assurance on the shop floor. Discuss precision requirements with Metav Werkzeuge in Emmerich—quote SKU M323.347 for rapid application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M323.347 GTIN: 4061905059070 Product label: Test pin, single, 3.47 mm, ±0.001 mm, length 50 mm Core technical data Diameter: 3.47 mm Length: 50 mm Nominal tolerance: ±0.001 mm Weight: 0.006 kg Special features Material: special steel Version: workshop execution Category: Test pins (Messstifte) FAQ What level of accuracy does the test pin offer? The Metav IndustryLine test pin M323.347 provides a nominal tolerance of ±0.001 mm, suitable for high‑precision workshop inspection tasks where tight dimensional control is required. For which applications is this pin intended? This test pin is designed for end‑measurement, plug gauge checks and fixture‑based verification in production and inspection environments that demand fine dimensional control. Is the material suitable for daily workshop use? Yes, the pin is made from special steel and supplied in a workshop execution, giving a balance of wear resistance and handling robustness for routine inspection duties. How does the pin help reduce inspection time? By offering a stable contact geometry and tight tolerance, the component improves repeatability and reduces re‑measurement, thereby streamlining inspection workflows and lowering throughput time. Which identifier should be quoted when ordering or enquiring? Please refer to SKU M323.347 or GTIN 4061905059070 when enquiring about this Metav IndustryLine test pin. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.48mm Gauge Pin, Workshop Version, ±0.001mm, 50mm Length - Metav IndustryLine
Take advantage of a combination of industrial accuracy and durable workshop design: the gauge pin provides ±0.001 mm positional certainty at a compact 3.48 mm diameter and a practical 50 mm length for reliable end‑measure checks. Order the gauge pin directly via Metav Werkzeuge or ask our consultants if required. Gauge pin M323.348 — single precision gauge pin, Ø 3.48 mm, ±0.001 mm, 50 mm The Gauge pin M323.348 is a workshop‑grade precision pin designed for end‑measure verification, plug‑gauge tasks and small‑part inspection in production and assembly environments. Precision tolerance ±0.001 mm Diameter 3.48 mm for tight fit checks 50 mm length for deeper measurement points Workshop design in special steel for durability Faster, measurable inspection thanks to tight tolerance A tolerance of ±0.001 mm places this pin in the high‑precision category for routine gauge work, reducing uncertainty when checking end dimensions. The fine tolerance improves repeatability across serial checks and minimises rework by providing a clear go/no‑go reference. For users accustomed to standard workshop gauges, the improved accuracy translates directly into reduced inspection time and fewer downstream rejects, which benefits production throughput and quality assurance procedures. Compact diameter with practical reach for jig and fixture checks The 3.48 mm diameter combined with a 50 mm shaft gives access to recessed holes and deeper locating features without compromising stiffness. The small cross‑section keeps the contact area minimal for tight fits, while the length allows engagement beyond countersinks or shallow bores. This geometry is particularly useful in fixture set‑up, small‑component assembly and incoming part inspection where a precise reference gauge must fit into confined geometries. Durable construction for workshop environments Manufactured from special steel, the pin is specified for workshop use and resists wear under frequent contact. The chosen material ensures surface integrity over many cycles and supports consistent measurements without rapid degradation. In practice this means fewer replacements and stable measurement behaviour, supporting long‑term process stability and delivering a reliable reference for daily inspection tasks. Traceable identity and suitability for production use Supplied under the Metav IndustryLine, the item offers a clear product identity for procurement and inventory: M323.348. The compact design and industrial finish make the pin suitable for production lines, incoming inspection benches and maintenance kits where small‑format precision is required. Using standardised gauge pins simplifies documentation of quality checks and supports consistent recording of results in inspection reports. For precision inspection needs, contact Metav Werkzeuge about the Metav IndustryLine gauge pin M323.348 — call +49 2822 7131930 or email info@metav-werkzeuge.com for ordering and technical clarification. Technical data Article number: M323.348 GTIN: 4061905059087 Manufacturer: Metav IndustryLine Facts Diameter: 3.48 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.006 kg Special features Material: special steel Workshop execution Eclass: 21170231 FAQ What applications is this gauge pin suited for? The gauge pin M323.348 is suited for end‑measure verification, plug‑gauge checks and locating duties in fixtures and assembly jigs within workshop and production environments. How precise is the measurement reference of the pin? With a tolerance of ±0.001 mm, the M323.348 provides a high‑precision dimensional reference suitable for tight fit inspections and repeatable go/no‑go checks. What material is used and why does it matter? The pin is made from special steel; this material choice delivers wear resistance and dimensional stability under regular contact, supporting longer service life in production use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.49mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Reliable shop-floor verification with a 3.49 mm test pin and ultra-fine ±0.001 mm tolerance ensures repeatable end‑measure checks; the 50 mm length and special steel construction support durable, deeper gauging tasks. Order this test pin directly from Metav Werkzeuge or consult our specialists for application advice. Test pin M323.349 — single precision gauge pin, Ø 3.49 mm, ±0.001 mm (Metav IndustryLine) A Test pin M323.349 designed for micro‑range end‑measurement and inspection tasks in workshop environments. Workshop version construction Diameter 3.49 mm, tolerance ±0.001 mm Length 50 mm for deeper measurements Special steel for robust wear resistance Precision tailored for micro measurements This single‑piece gauge pin delivers micrometre‑level control in a compact format. With a nominal diameter of 3.49 mm and a declared tolerance of ±0.001 mm, the pin suits micro‑range verification where repeatability is critical; it is classified for the micro measurement band (max. range up to 100 mm). The tight tolerance reduces measurement uncertainty during end‑dimension checks, helping to cut rework and maintain production throughput with predictable inspection cycles. Built for workshop use and straightforward handling The workshop‑grade finish and special steel composition provide mechanical resilience for routine shop use while keeping handling simple. At 50 mm overall length the pin reaches recessed bores and faces without losing rigidity, and its low mass supports rapid manipulation during sampling. Delivery in a protective box ensures the pin arrives free of transit damage and is convenient to store between uses, preserving the calibrated surface for longer service life. Integration into quality processes and traceability As a single verification element, the pin is ideal for go/no‑go checks, plugging fixtures or as a reference in comparator setups where a defined end‑measure is needed. The clear article identification and supplied GTIN support inventory control and traceability in quality documentation. For tailored advice on fitting the pin into existing jigging and inspection routines, Metav’s technical team can advise on mounting and handling to maintain measurement reliability. Contact Metav Werkzeuge today to source the Metav IndustryLine Test pin M323.349 or to request application guidance from our workshop measurement specialists Technical Data Article number: M323.349 GTIN: 4061905059094 Label: Prüfstift, einzeln, 3,49mm, +/- 0.001 mm Länge 50 mm Facts Diameter: 3.49 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.006 kg Special features Material: Special steel Workshop version Supplied in protective box Single test pin FAQ What is the declared tolerance of this test pin? The test pin M323.349 from Metav IndustryLine has a declared tolerance of ±0.001 mm, suitable for micro‑range verification tasks. For which measurement range is this pin intended? The pin is intended for the micro measurement band; the nominal diameter is 3.49 mm and the overall length is 50 mm, making it appropriate for compact, high‑precision checks. Is the pin supplied ready for storage and transport? Yes, the Metav IndustryLine test pin M323.349 is supplied in a protective box to prevent damage during transport and to support safe storage. Can this single pin be used for fixture or comparator reference points? The gauge pin M323.349 is suitable as a reference element in simple fixtures and comparator setups where a defined, repeatable diameter is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.4mm Gauge Pin, Single, ±0.001mm, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the ±0.001 mm tolerance and compact 3.40 mm diameter combined with a 50 mm working length for reliable end‑measure verification and repeatable shop‑floor checks. Order the gauge pin directly via Metav Werkzeuge or request advice from our consultants to ensure correct integration into inspection routines. M323.340 Gauge Pin (3.40 mm) – ±0.001 mm tolerance, 50 mm length, Metav IndustryLine The M323.340 gauge pin is a workshop‑grade precision inspection pin designed for tight‑fit checks and end‑measure verification in production and quality control environments Workshop-grade precision inspection pin Diameter 3.40 mm for tight fit checks Tolerance ±0.001 mm for micrometre accuracy 50 mm hardened special steel construction Precision where micrometres decide A compact inspection pin with a 3.40 mm nominal diameter and ±0.001 mm specification enables highly reliable pass/fail checks for small bores and mating parts. The fine tolerance corresponds to micrometre‑level control and reduces uncertainty when validating end dimensions or verifying tooling fits. In practical terms, the small diameter and tight tolerance make this instrument suitable for precision assembly, inspection fixtures and verification of final measures on turned or drilled components. The design supports straightforward use in repeatability tasks where consistent contact geometry and minimal deformation are essential. Built for repetitive workshop use Constructed as a workshop‑grade item from special steel, this inspection pin balances handling ease with dimensional stability. With a 50 mm overall length, the pin grants sufficient reach for many standard checks without unnecessary leverage that could compromise repeatability. The low mass aids manual placement while the robust material withstands routine use in production areas. As a single‑piece precision pin, it streamlines inspection workflows where frequent insertion and withdrawal are required, helping to maintain consistent measurement conditions and reduce rework caused by uncertain fits. Practical application and measurement benefits In application, the gauge pin functions as a reliable reference for bore checks, end‑measure verification and fixture validation. Used with simple go/no‑go assemblies or as a reference in jigs and gauges, the pin helps shorten inspection cycles and contributes to stable process control. The precision offered by the specified tolerance supports tighter acceptance criteria and fewer downstream adjustments, improving overall production yield. Routine good practice includes gentle handling, clean‑room‑free storage and periodic verification against calibrated references to preserve the stated accuracy. Contact Metav Werkzeuge today to secure the M323.340 gauge pin for precise end‑measure verification or to discuss tailored inspection solutions with our specialists Technical data Article number: M323.340 GTIN: 4061905058080 Brand: Metav IndustryLine Core specifications Diameter: 3.40 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.006 kg Special features Workshop version Material: special steel Single gauge pin for inspection and verification Intended use: end‑measure verification FAQ What materials is the M323.340 suitable for inspecting? The M323.340 gauge pin (Metav IndustryLine) is primarily a dimensional reference for metallic and machined bores; material compatibility is determined by the workpiece rather than the pin itself. How significant is the ±0.001 mm tolerance in everyday inspection? A tolerance of ±0.001 mm places the inspection pin in the micrometre class, allowing the M323.340 to serve where high repeatability and tight acceptance limits are required in precision manufacturing. Is the M323.340 intended for production or laboratory use? The M323.340 is a workshop‑grade inspection pin designed for routine shop‑floor and production checks while still offering the precision needed for stringent quality control tasks. How should the gauge pin be maintained to preserve accuracy? Regular cleaning, avoidance of impacts, and storage in a dry, clean environment are recommended for the M323.340; periodic verification against calibrated standards will ensure continued performance. Can the M323.340 be used in fixture or jig assemblies? Yes, the M323.340 gauge pin (Metav IndustryLine) is suitable as a fixed reference or removable checking element in fixtures and jigs where consistent contact geometry is required Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.51mm Gauge Pin, Single, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of sub‑micron accuracy, compact size and workshop robustness for reliable end‑dimension verification; order directly via Metav Werkzeuge or consult the sales team for integration advice. M323.351 Gauge Pin — 3.51 mm, ±0.001 mm, 50 mm length (Metav IndustryLine) A gauge pin M323.351 engineered for high‑precision end‑dimension checks in metrology and workshop quality control Sub‑micron tolerance ±0.001 mm 3.51 mm diameter for precision fits 50 mm length, workshop execution Reduce rejects with measurable, repeatable accuracy The M323.351 is built to deliver repeatable measurements where a few micrometres make the difference between pass and rework. With a declared tolerance of ±0.001 mm, the pin enables reliable verification of end dimensions and tight bores, reducing uncertainty in incoming inspection and setup tasks. The small diameter supports verification of narrow features and mating parts, while the precise tolerance helps to ensure process stability and fewer downstream corrections. Workshop‑grade construction for everyday handling Manufactured from special steel in a workshop‑grade design, this precision pin combines dimensional stability with practical robustness. Its 50 mm length provides a useful reach for many standard fixtures without compromising handling, and the lightweight construction simplifies manual gauging tasks. The construction standard supports repeated use in production environments, so routine checks remain quick and consistent, contributing to efficient machine setups and shorter inspection cycles. Seamless fit into inspection and production routines This precision tool is intended for end‑dimension verification, gauge setting and spot checks during assembly or final inspection. Its compact form factor and 3.51 mm diameter make it suitable for narrow bores and precision components across toolmaking, small‑part manufacturing and quality labs. Backed by Metav IndustryLine’s quality filter in Emmerich and decades of distribution experience, the pin complements measurement chains that prioritise traceable, reproducible results. For procurement or technical ordering of the Metav IndustryLine M323.351 gauge pin, contact Metav Werkzeuge for product availability and specific integration recommendations via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: M323.351 GTIN: 4061905059117 Label: Prüfstift, einzeln, 3,51mm, +/- 0.001 mm Länge 50 mm Key measurements Diameter: 3.51 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.007 kg Materials & features Material: special steel Workshop execution Single gauge pin Application: end‑dimension checks FAQ What tolerance does this gauge pin provide? The M323.351 gauge pin from Metav IndustryLine is specified with a tolerance of ±0.001 mm, suitable for sub‑micron end‑dimension verification. What are the exact dimensions of the pin? The pin measures 3.51 mm in diameter and 50 mm in length (SKU: M323.351). What material is the pin made from? This item is made of special steel, chosen for dimensional stability and workshop durability. For which tasks is this pin most suitable? It is intended for end‑dimension checks, gauge setting and spot inspection of narrow bores and precision components in toolmaking and small‑part production. Is the item supplied as a single unit or a set? The product is supplied as a single gauge pin (labelled as einzeln); packaging specifics are not listed in the product data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.52mm Test Pin Single, ±0.001mm Accuracy, Length 50mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm tolerance, a compact 3.52 mm diameter and a 50 mm working length for dependable end‑measurements in workshop environments; the workshop‑grade design and protective case keep the pin ready for repeated use. Order the gauge pin directly via Metav Werkzeuge or consult the Metav team for application guidance. M323.352 Gauge pin (3.52 mm) — ±0.001 mm tolerance, 50 mm length The M323.352 is a single precision gauge pin designed for end‑measurements and dimensional checks in workshop and inspection routines, combining a narrow diameter with tight tolerance for consistent size verification. Diameter 3.52 mm with ±0.001 mm tolerance 50 mm overall length for end‑measurements Workshop version made from special steel Supplied in a protective case for transport Precision that reduces rework and strengthens quality control A compact diameter of 3.52 mm combined with a tolerance of ±0.001 mm delivers measurable benefits for final size verification and pass/fail inspection tasks. The extremely small permissible deviation means that the pin serves as a reliable reference for end‑measurements, lowering the risk of false acceptance and reducing repeat machining. In practical terms, this level of accuracy supports tighter process control and fewer downstream defects, which in turn saves time and material costs. Robust workshop design for everyday handling The workshop execution and special steel construction are chosen for durability under frequent use. With a usable 50 mm length the pin is long enough for secure placement in gauges and fixtures while remaining easy to handle by a single operator. Supplied in a protective case, the component remains protected from knocks and contamination during storage and transport, preserving its geometry and ensuring consistent measurement behaviour across repeated cycles. Practical metrology benefits for integration into inspection routines As a compact, high‑precision reference, this gauge pin supports rapid comparative checks and fits into slot, bore and plug gauge arrangements where small diameters are required. Its low mass and precise ground geometry provide excellent repeatability, making it suitable for both ad hoc verification on the shop floor and formal inspection steps in a quality plan. The combination of size, tolerance and durable material contributes to reliable measurement results and predictable production outcomes. For precision end‑measurement tasks choose the Metav IndustryLine M323.352 gauge pin — contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich Technical data Article number: M323.352 GTIN: 4061905060076 Material: Special steel Designation: Prüfstift, einzeln, 3,52 mm, ±0.001 mm, Länge 50 mm Measurements / Core data Diameter: 3.52 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.007 kg Features / Delivery Workshop execution Supplied in protective case Story trigger: endmasse SKU: M323.352 FAQ What level of precision does this gauge pin provide? The gauge pin from Metav IndustryLine offers a tolerance of ±0.001 mm, which is suitable for tight end‑measurements and high‑repeatability checks. Is the pin suitable for regular workshop use? Yes, the workshop version is manufactured from special steel and is designed for frequent handling and routine inspection tasks. Can this pin be used for bore and plug comparisons? The 3.52 mm diameter and ground geometry make the pin appropriate for plug‑type checks and comparative gauge arrangements where small diameters are required. How is the pin delivered to protect its geometry? The component is supplied in a protective case to prevent damage during transport and storage and to help maintain measurement reliability. Which identifier should be used when ordering or specifying this item? Use the SKU M323.352 or the GTIN 4061905060076 when specifying or ordering the gauge pin from Metav IndustryLine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.53mm Gauge Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
Take advantage of the combination of high repeatability, ±0.001 mm tolerance and a compact 50 mm length for reliable end‑dimension checks; order the gauge pin directly via Metav Werkzeuge or contact our consultants for application support. Gauge pin M323.353 — test pin, 3.53 mm diameter, ±0.001 mm (Metav IndustryLine) The gauge pin M323.353 is a workshop‑grade test pin designed for precise end‑dimension checks and fitting verification in production and inspection environments. Workshop version for industrial use Diameter 3.53 mm, tolerance ±0.001 mm 50 mm special steel pin for stable handling Supplied in a protective transport case Repeatable end‑dimension checks for quality control The small diameter and tight ±0.001 mm tolerance ensure consistently reproducible measurements when checking bore sizes, plug fits or component end dimensions. This level of accuracy corresponds to a fine metrological grade suitable for tactile inspection tasks where deviation must be kept to a minimum. The design reduces uncertainty in go/no‑go assessments and supports traceable inspection routines on the shop floor, contributing to stable production quality and faster decision‑making during first‑article inspections. Robust workshop construction that speeds up inspection Manufactured from special steel in a workshop configuration, the pin combines wear resistance with a compact 50 mm length that is easy to handle and store. The single‑piece supply format simplifies inventory management and avoids the confusion of sets for repetitive checks. Delivered in a protective transport case, the component is protected against transit damage and contamination, which helps to maintain measurement integrity and reduces downtime due to rework or cleaning. Simple integration into existing inspection workflows As a precision end‑measurement tool, the pin integrates with common verification processes such as bore gauging, seat testing and dimensional stamping checks. Its nominal diameter of 3.53 mm and fine tolerance make it particularly useful for end‑mass checks where small clearances determine part acceptance. The compact form factor supports fast handling, so inspection cycles remain efficient while delivering the fine accuracy required for quality assurance in small to medium components. For assured measurement reliability with Metav IndustryLine components, request further technical details or an application consultation from Metav Werkzeuge via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M323.353 GTIN: 4061905060083 Label: Prüfstift, einzeln, 3,53mm, +/- 0.001 mm Länge 50 mm Manufacturer: Metav IndustryLine Facts Diameter: 3.53 mm Length: 50 mm Accuracy / tolerance: ±0.001 mm Weight: 0.007 kg Special features Material: special steel Version: workshop execution Delivery: single test pin Protective transport case included Application focus: end‑dimension checks FAQ What is the intended use of this gauge pin? The gauge pin M323.353 from Metav IndustryLine is intended for precise end‑dimension and fit checks such as bore gauging and plug tests in workshop and production inspection tasks. Is the pin suitable for repeated use in a production environment? Yes. The workshop execution and special steel construction make the gauge pin suitable for repeated handling and frequent inspection cycles while maintaining the specified ±0.001 mm tolerance. Does the product come with a protective case? A protective transport case is supplied with the single gauge pin to prevent transit damage and contamination during storage and handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.54mm Gauge Pin, Single, ±0.001mm, Length 50mm, Workshop Version - Metav IndustryLine
The combination of industrial-grade accuracy, compact form and a workshop-hardened finish ensures reliable end‑measure checks and long service life; supplied ready for protected transport, the pin supports efficient inspection workflows. Order the M323.354 gauge pin directly via Metav Werkzeuge or ask our consultants if needed. M323.354 Gauge Pin – Ø 3.54 mm, ±0.001 mm (Workshop Grade) The M323.354 is a workshop-grade gauge pin designed for precise end‑measure verification and fit checking in jigs, fixtures and inspection routines. Ø 3.54 mm with ±0.001 mm tolerance Length 50 mm Workshop-grade special steel Delivered in protective transport case Exact small-diameter checks for consistent quality High-precision manufacturing of small diameters is often the deciding factor in assembly and inspection. This gauge pin delivers a certified tolerance of ±0.001 mm, which permits repeatable verification of bore fits and end measures where micrometric conformity is required. The combination of a precise diameter of Ø 3.54 mm and a compact length ensures minimal deflection during alignment tasks; as a result, inspection processes can be standardised and measurement variation reduced. Using a dedicated pin for end‑measure verification simplifies go/no‑go assessments and supports process control documentation. Robust workshop design that withstands daily use A workshop environment demands tools that resist wear without sacrificing accuracy. Machined from special steel and finished as a workshop-grade component, the pin resists surface damage from repeated seating in bores and mounting fixtures. At approximately 0.007 kg, the component is easily handled and positioned, while its 50 mm shank length provides sufficient engagement for stable checks without being unwieldy. Supplied in a protective transport case, the item is ready for safe storage and transport between inspection benches, minimising the risk of accidental damage and preserving the calibrated condition. Easy integration into metrology and assembly processes Designed for direct use in inspection jigs, plug gauge arrangements and end‑measure controls, the pin functions as a reliable reference for both manual and semi‑automated checks. Its compact geometry makes it suitable for confined setups and multi‑point alignment tasks, while being straightforward to document in quality records. The product is traceable via its SKU and GTIN for inventory control and quality management systems, enabling clear part identification in procurement and calibration logs. For workshops seeking to streamline routine checks, this small gauge component is a practical, high‑precision building block. For precise inspection needs, contact Metav Werkzeuge to request the Metav IndustryLine M323.354 gauge pin and confirm suitability for specific inspection procedures; Metav Werkzeuge is available at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M323.354 GTIN: 4061905060090 Weight: 0.007 kg Material: Special steel Diameter: 3.54 mm Length: 50 mm Tolerance: ±0.001 mm Workshop version Supplied in transport case Core specifications Diameter: 3.54 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.007 kg Special features Workshop-grade finish Special steel construction Protective transport case for delivery SKU: M323.354 Intended for end‑measure verification (storytrigger: endmasse) FAQ What applications is this gauge pin suited for? The M323.354 gauge pin is suitable for end‑measure verification, bore fit checks and fixture alignment in workshop and inspection settings. How precise is the diameter and what does the tolerance mean? The pin is manufactured to Ø 3.54 mm with a tolerance of ±0.001 mm, meaning the actual diameter will lie within that narrow band to ensure consistent fit testing. Is the gauge pin protected for transport? Yes, the product is supplied in a protective transport case to reduce the chance of damage during storage and movement. What material is used and why does it matter? Constructed from special steel, the pin offers enhanced wear resistance and surface stability, which helps maintain dimensional integrity during repeated use. How can the pin be referenced in inventory and quality systems? The component is identifiable by SKU M323.354 and GTIN 4061905060090 for clear tracking in procurement and calibration records. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.55mm Test Pin Length 50mm ±0.001mm Workshop Version - Metav IndustryLine
Take advantage of the combination of ultra‑fine ±0.001 mm accuracy and robust special steel construction for repeatable end‑measurement tasks; order directly via Metav Werkzeuge or ask our consultants for application advice. M323.355 Test Pin (3.55 mm, ±0.001 mm; 50 mm) – Metav IndustryLine The M323.355 Test Pin is a single precision inspection pin designed for reliable end‑measurements and gauging tasks in workshop and production environments Workshop design for robust daily use Diameter 3.55 mm with ±0.001 mm accuracy 50 mm overall length for end‑measurements Supplied in protective transport case Precision that reduces rework and inspection time The finely finished inspection pin delivers an accuracy of ±0.001 mm, equivalent to one micrometre, which provides a clear, objective measurement basis for critical end‑dimensions. This level of precision minimises the need for repeat checks and reduces downstream rework; in practice it helps to keep assembly tolerances within specification and supports efficient quality control processes. The narrow 3.55 mm diameter and the precise length control are tailored for tight bore and end‑face checks where repeatability is decisive. Mechanical robustness for everyday workshop use Made from special steel and supplied in a protective transport case, this workshop version is engineered for frequent handling and secure transport between bench and machine. The 50 mm overall length offers a practical working reach without compromising stiffness, so contact stability is maintained during manual gauging tasks. The compact mass contributes to responsive handling while the material choice ensures wear resistance in contact applications, extending the service life and lowering total cost of ownership through fewer replacements. Simple integration into established inspection routines The single inspection pin is suitable as a fixed reference for end‑measurement, gauging fixtures or portable checks where a small, repeatable contact element is required. Its uncomplicated geometry allows quick seating in holders or adapters and straightforward comparison against master gauges. Where traceable results are required, the product supports documentation workflows through standard metrology practice and clear numerical outcomes rather than subjective assessment, improving decision speed on shop‑floor acceptance. Contact Metav Werkzeuge for tailored advice or to order the Metav IndustryLine test pin directly from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M323.355 GTIN: 4061905055577 Category: Messstifte Weight: 0.007 kg Facts Diameter: 3.55 mm Length: 50 mm Accuracy: ±0.001 mm Special features Material: special steel Workshop version Supplied in protective transport case FAQ What tolerances can be reliably checked with this inspection pin? The inspection pin achieves ±0.001 mm tolerance performance, making the M323.355 Test Pin (Metav IndustryLine) suitable for micrometric end‑measurement tasks where variations of one micrometre matter. Is the test pin suitable for repeated shop‑floor use? Yes, the workshop design and special steel construction enable durable, repeated use; the supplied protective transport case keeps the pin secure during storage and handling. Can this pin be mounted in gauging fixtures or holders? The straight geometry and standard diameter allow the pin to be seated in common holders and fixtures for comparison and fixed reference applications. Does the product include calibration documentation? Calibration information is provided according to the product labelling and delivery scope; please contact Metav Werkzeuge for details about traceability and certificates. What typical applications suit a 3.55 mm, 50 mm inspection pin? Common uses include end‑face checks, small bore gauging, fixture reference points and final inspection of machined components where compact, repeatable contacts are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.56mm Test Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of workshop-grade build and sub-micron repeatability in a compact test pin; the combination of ±0.001 mm tolerance and a precise Ø 3.56 mm diameter ensures reliable end measurements and consistent inspection results — order the item directly via Metav Werkzeuge or consult our specialists for application advice. M323.356 Gauge pin — single test pin, Ø 3.56 mm, ±0.001 mm (Metav IndustryLine) The M323.356 is a single gauge pin designed for workshop metrology and end‑measurement tasks where a compact, high‑precision reference is required. Workshop-grade construction Diameter Ø 3.56 mm, length 50 mm High precision ±0.001 mm tolerance Special steel for wear resistance Consistent, measurable precision for inspection routines The compact test pin delivers repeatable reference points for go/no‑go checks, fixture setting and bore verification. With a declared tolerance of ±0.001 mm, the component provides a measurable improvement in dimensional control compared with coarser gauge tools; this precision reduces uncertainty during sampling and supports faster decision‑making in quality control protocols. The specified Ø 3.56 mm and 50 mm usable length make the pin well suited to small‑bore inspections and as a reference in micrometric checks without introducing excess overhang or deflection. Durable workshop design that withstands daily use Built as a workshop‑grade instrument from special steel, the pin combines a wear‑resistant surface with a geometry that resists deformation during repeated seating and removal. The light mass and compact form aid handling and reduce operator fatigue during repetitive checks, while the robust material choice prolongs service life in production environments. The single‑piece design minimises potential error sources and preserves the reference geometry over time, thereby lowering long‑term replacement frequency and contributing to predictable maintenance scheduling. Integrates smoothly into inspection and setup workflows As a single test pin with a clear item identity, the part can be used as a datum for setting up jigs, aligning fixtures or verifying bore diameters against production tolerances. Traceability is supported by the provided SKU and GTIN, facilitating inventory control and procurement within established supply chains. The pin’s compact dimensions allow straightforward storage and rapid deployment at the inspection station, helping to shorten setup times and increase throughput in routine quality checks. The product is therefore an efficient tool for workshops seeking to tighten process control without complex instrumentation. Contact Metav Werkzeuge today to request a quote for the M323.356 gauge pin or to discuss its suitability for inspection tasks — our specialists in Emmerich are available by email or phone Technical data Article number: M323.356 GTIN: 4061905055584 Label: Prüfstift, einzeln, 3,56mm, +/- 0.001 mm Länge 50 mm Category: Messstifte Manufacturer: Metav IndustryLine Facts Diameter: 3.56 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.007 kg Accuracy class: ±0.001 Special features Workshop execution Material: special steel Single test pin delivery Story trigger: end measurement FAQ What tolerance is guaranteed for this gauge pin? The M323.356 gauge pin from Metav IndustryLine is specified with a tolerance of ±0.001 mm, making it suitable for high‑precision reference and inspection tasks. What are the physical dimensions and weight of the test pin? The test pin measures Ø 3.56 mm with a length of 50 mm and a weight of 0.007 kg, designed for compact inspection setups. What material is used for the pin and how does that affect wear? The pin is manufactured from special steel in a workshop‑grade finish; this material selection increases wear resistance and helps preserve the reference geometry during repeated use. Can this pin be used as an end standard for bore checks and fixture setting? Yes — the compact geometry and tight tolerance make the M323.356 suitable as an end standard for bore verification, fixture alignment and setting tasks in production and repair workshops. How is the product identified for procurement and inventory? Identification is provided via SKU M323.356 and GTIN 4061905055584, facilitating ordering and stock management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.57mm Gauge Pin, Single, ±0.001mm Tolerance, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of ±0.001 mm tolerance, 3.57 mm diameter and 50 mm length for reproducible end‑dimension checks; order the part directly via Metav Werkzeuge or consult our technical advisors for application matching. M323.357 gauge pin — 3.57 mm, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) The M323.357 gauge pin is a single, workshop‑grade inspection pin for end‑dimension verification and fixture set‑up in precision manufacturing environments. Workshop-grade precision ±0.001 mm Diameter 3.57 mm, ground finish Length 50 mm for fixture and end gauges Reproducible reference for end‑dimension inspection A compact, hardened reference element delivers consistent results when measuring finished diameters or setting up jigs. The 3.57 mm nominal diameter combined with the ±0.001 mm manufacturing tolerance creates a reliable reference surface that reduces measurement uncertainty. In practice, a stable reference pin shortens inspection cycles and improves quality control throughput by offering a repeatable datum for comparative or go/no‑go procedures. This benefit is especially relevant where small deviations can affect assembly fit or functional clearance. Robust material and workshop suitability Manufactured from special steel, the pin resists wear during frequent seating and removal cycles common in workshop routines. The workshop specification emphasises a ground finish for smooth seating and minimal surface deformation, which preserves the calibrated dimension over repeated use. The compact 50 mm shaft length provides adequate engagement in fixtures while remaining easy to handle, enabling single‑operator checks without sacrificing stiffness or repeatability. Practical integration into measurement workflows Lightweight and straightforward to use, the pin simplifies routine checks within production lines and inspection benches. At roughly 0.007 kg, handling is effortless and the item is appropriate for both bench inspection and fixture insertion. The single‑piece design suits direct incorporation into assembly jigs as a fixed reference or as a portable master for spot checks. Clear numerical specifications and material definition make the component easy to document in quality records and to include in process control plans. For precise end‑dimension control request the M323.357 through Metav Werkzeuge — our Emmerich team provides technical advice to ensure the pin fits the intended inspection task. Technical data Article number: M323.357 GTIN: 4061905055591 Manufacturer: Metav IndustryLine Dimensions & accuracy Diameter: 3.57 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.007 kg Special features Workshop execution Single gauge pin (individual supply) Material: special steel Category: gauge pins FAQ What is the declared tolerance of this gauge pin? The M323.357 gauge pin is manufactured to a tolerance of ±0.001 mm, making it suitable as a high‑precision reference in workshop inspection routines. Which material is used for the pin? This gauge pin is made from special steel, selected for wear resistance and dimensional stability under repeated seating. Is the pin supplied individually or as part of a set? The article is supplied individually, as a single inspection pin suitable for fixture installation or portable use. Can the pin be used for jig and fixture set‑up? Yes — the 50 mm length and ground finish allow the pin to serve as a stable datum in jigs, fixtures and end‑dimension verification checks. What is the item weight for handling considerations? The pin weighs approximately 0.007 kg, facilitating easy manual handling and minimising added load on lightweight fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.58mm Gauge Pin ±0.001mm Length 50mm Workshop Finish - Metav IndustryLine
Take advantage of a combination of exacting ±0.001 mm tolerance and robust, workshop‑grade construction to ensure repeatable end‑dimension checks. Order the test pin directly via Metav Werkzeuge or contact our advisers for application support. Test pin M323.358 — Precision gauge pin 3.58 mm, ±0.001 mm Test pin M323.358 is a workshop‑grade gauge pin intended for precise end‑dimension and fit verification in fixtures, gauges and assembly jigs. Accuracy ±0.001 mm for end‑dimension checks Diameter 3.58 mm, hardened special steel Length 50 mm for stable insertion depth Workshop version with transport case included Consistent accuracy for process control and quality gates The Test pin M323.358 is engineered as a high‑precision gauge pin for repeatable dimensional checks. With a tolerance of ±0.001 mm, it supports tight control limits that reduce downstream rework and improve first‑pass yield. The narrow diameter of 3.58 mm minimises contact area while keeping radial runout low; this makes the pin suitable for final go/no‑go verification, plug gauges and end‑mass inspection where dimensional certainty is essential. The design favours straightforward integration into existing inspection fixtures and manual gauge sets. Robust handling and workshop suitability for everyday use Designed as a workshop‑grade component, this test pin balances durability with ease of handling. Its 50 mm length gives ample insertion depth for stable seating in jigs without excess overhang, and the low mass keeps operator fatigue to a minimum during repeated use. Delivered in a protective transport case, the pin is protected in transit and during storage, helping to preserve measurement integrity and extend service life. The compact dimensions also make it convenient to include in portable gauge kits for on‑site checks. Material choice and durability explained Manufactured from special steel, the pin is intended for repeated engagement in contact inspection routines. The material selection focuses on surface wear resistance and dimensional stability under frequent use; this ensures that the pin maintains the specified tolerance over many cycles. Where repeatability is required, the construction minimises surface deformation and maintains geometric form so that comparative and reference measurements remain reliable without frequent replacement. Practical applications and process advantages The pin is primarily used for end‑dimension verification, alignment of small bores, plug gauge checks and positional verification in fixture assembly. In production environments it simplifies go/no‑go decisions and accelerates inspection throughput by providing a single, traceable datum for fit assessments. Because the component is supplied as a single, workshop‑ready item, it can be added directly to existing gauge sets or used as a reference pin in small‑batch quality control, supporting lean inspection workflows and faster setup times. Contact Metav Werkzeuge today for ordering details and to discuss how the M323.358 can be integrated into existing gauges — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.358 GTIN: 4061905055607 Category: Gauge pins Type: Test pin, single piece Facts Diameter: 3.58 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.007 kg Special features Material: special steel Workshop version Delivered in protective transport case Intended for end‑dimension and fit checks Supplied as a single piece FAQ What tolerance does the pin offer and for which checks is it suitable? The test pin M323.358 provides a tolerance of ±0.001 mm and is suitable for end‑dimension, plug‑gauge and fit verification tasks in fixture and gauge applications. Is the pin supplied ready for use and how is it packaged? The M323.358 is supplied as a single, workshop‑grade pin and is delivered in a protective transport case to maintain its condition during storage and transport. What material is used for the pin and why? The pin is made from special steel selected for durability and dimensional stability under frequent contact inspection, helping to preserve the specified tolerance over many cycles. Can this pin be integrated into existing gauge sets? Yes — the pin’s standard diameter and 50 mm length make it straightforward to add to portable gauge kits, fixture assemblies or plug‑gage stations without special adapters. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.59mm Gauge Pin, Single, ±0.001 mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the precise combination of ±0.001 mm dimensional accuracy, compact 3.59 mm diameter and workshop‑ready robustness for reliable end‑dimension checks. Order the gauge pin directly via Metav Werkzeuge or contact the consultants for specification support. M323.359 gauge pin — 3.59 mm diameter, ±0.001 mm accuracy (Metav IndustryLine) M323.359 is a compact gauge pin for workshop and inspection use, designed to deliver repeatable end‑measurement and fit checks in production and quality control environments. Diameter 3.59 mm with ±0.001 mm tolerance Length 50 mm workshop version Special steel for wear resistance Supplied in a transport case Repeatable precision for critical end‑measurements The core advantage of this gauge pin is its ±0.001 mm tolerance, which enables highly repeatable checks of bore diameters and mating fits where small deviations matter. With a nominal 3.59 mm diameter, the pin serves as a reference for end‑dimension verification and go/no‑go comparisons within tight production tolerances. The fine accuracy reduces uncertainty in quality control and supports consistent process control across batches. Workshop design that endures everyday use Constructed from special steel and specified as a workshop version, the pin balances toughness with the dimensional stability required for routine inspection tasks. At 50 mm length and approximately 0.007 kg, the component is easy to handle and resists deformation under normal use, which prolongs service life and lowers replacement frequency. The material choice improves wear resistance on contact surfaces, helping to protect measurement reliability over time. Practical handling and storage for inspection workflows Delivery in a dedicated transport case keeps the pin protected between uses and simplifies storage on the shop floor or in inspection cabinets. The compact form factor makes the pin straightforward to integrate into existing inspection routines, fixtures and gauge sets, reducing cycle time for manual checks. Clear marking (SKU M323.359) and catalogue data enable traceability in inventory management and inspection logs. Suitable applications across production and maintenance This gauge pin is engineered for end‑dimension and fit checks in assembly, machining and maintenance tasks. Typical uses include bore checking, alignment referencing and comparator-based quality control where a stable plug reference is required. The robust workshop specification and precise tolerance make the item a dependable tool for both routine inspections and occasional verification tasks in small to medium production environments. For procurement and technical advice on the Metav IndustryLine M323.359 gauge pin with ±0.001 mm accuracy, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss order options and delivery details Technical data Article number: M323.359 GTIN: 4061905055614 Manufacturer: Metav IndustryLine Data Diameter: 3.59 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.007 kg Special features Workshop version Material: special steel Supplied in transport case Category: gauge pins FAQ What tolerance does this gauge pin offer? The M323.359 gauge pin is specified with a tolerance of ±0.001 mm, suitable for high‑precision end‑dimension checks. Which material is used for the pin? The pin is made from special steel, chosen for dimensional stability and wear resistance in workshop conditions. How is the item delivered for safe storage? Delivery is in a dedicated transport case to protect the pin during transport and storage. Can this pin be used for bore and fit checks? Yes — the M323.359 gauge pin is intended for bore verification, fit tests and alignment referencing in production and maintenance tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.5mm Test Pin Single ±0.001mm Length 50mm Workshop Version - Metav IndustryLine
Take advantage of workshop-ready precision with a 3.50 mm gauge pin that delivers ±0.001 mm accuracy and a compact 50 mm length; the robust special-steel construction ensures repeatable end-dimension checks and is supplied in a protective transport case. Order directly via Metav Werkzeuge or request technical advice from our consultants. Gauge pin M323.350 — precision test pin Ø 3.50 mm, ±0.001 mm (Metav IndustryLine) The gauge pin M323.350 is a compact precision test pin for reliable end-dimension verification and go/no-go checks in workshop and assembly inspection tasks High-precision ±0.001 mm tolerance Solid special steel construction 50 mm usable length for end-dimension checks Delivered in protective transport case Precise control for small diameters and critical fits A compact test pin in the micro range, this tool is designed for measurements where tight clearances decide assembly quality. The ±0.001 mm tolerance provides a quantifiable basis for acceptance criteria, reducing interpretation between operators and speeding up decision-making in inspection routines. By specifying a defined diameter of 3.50 mm and a measured length of 50 mm, the pin enables direct comparison with nominal end dimensions and supports standardised pass/fail procedures. This clarity in measurement reduces rework and scrap, delivering a measurable improvement in process reliability. Robust workshop design that tolerates daily use Engineered as a workshop version, the pin combines a hardened special-steel body with a finish suited to regular handling and insertion cycles. The selected material resists ordinary wear while keeping the measurement surface stable under repeated use, which preserves dimensional integrity over many inspection cycles. The compact design and low mass make hand manoeuvring straightforward, while the firm edge geometry reduces the risk of jamming when checking hole seats or mating parts. The result is a tool that keeps inspection throughput high without compromising repeatability. Practical handling, transport and storage for the workshop environment Delivered in a protective transport case, the pin is ready for immediate integration into inspection kits and portable measuring sets. The case protects the calibrated diameter and bearing surfaces during storage and transit, so accuracy is maintained from the supplier to the point of use. The small footprint of the pin simplifies organisation in tool drawers and gauge sets, while the ruggedised supply format supports mobile quality checks on the shop floor or next to assembly stations. This practicality shortens setup time and helps workshops maintain consistent measurement routines. Clear benefit: faster, reproducible acceptance decisions By combining a defined diameter, sub-micron-level tolerance and workshop-grade construction, this test pin streamlines routine inspections and gauge checks. The pin is suitable for use in dimensional control, fixture setup and final acceptance checks where the specified end measurements are decisive. Fewer ambiguous results and quicker go/no-go outcomes translate into higher throughput and reduced production bottlenecks, particularly where small-diameter fits are frequent. Request tailored technical advice or a supply proposal from Metav Werkzeuge GmbH for Metav IndustryLine gauge pins—contact +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M323.350 GTIN: 4061905059100 Manufacturer: Metav IndustryLine Measurements & accuracy Diameter: 3.50 mm Length: 50 mm Tolerance: ±0.001 mm Weight: 0.006 kg Special features Material: special steel Workshop version for regular use Supplied in a protective transport case ECLASS: 21170231 Storytrigger: end-dimension checks FAQ What applications suit this gauge pin? The gauge pin M323.350 is intended for end-dimension verification, go/no-go checks and fixture setup where a 3.50 mm diameter and tight tolerance are required; it is especially useful in workshops and assembly inspection. Is the stated accuracy of ±0.001 mm maintained in daily workshop use? When handled and stored in the supplied protective case and used for comparative checks, the pin maintains its ±0.001 mm accuracy; routine visual inspection of the bearing surfaces is recommended to ensure ongoing repeatability. Can this pin be used for hole checking and assembly clearance testing? Yes—this test pin is suitable for hole-seat verification and basic clearance testing in small-diameter fits, helping to confirm whether mating parts meet the specified end dimensions. What material is the pin made from and why does that matter? The pin is made from special steel, chosen for wear resistance and dimensional stability under repeated insertion cycles; this preserves the measurement surface and supports long-term reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.61mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Benefit from industrial‑grade repeatability and compact handling: the combination of ±0.001 mm accuracy, a 3.61 mm nominal diameter and a 50 mm shaft delivers reproducible end‑measurements with minimal setup time. Order this precision gauge pin directly via Metav Werkzeuge or consult our specialists for application advice. Gauge pin M323.361 — precision test pin, 3.61 mm, ±0.001 mm The gauge pin M323.361 serves as a compact precision test pin for end‑measurement and inspection tasks in workshop and production environments. Workshop version for industrial use 3.61 mm diameter with ±0.001 mm accuracy 50 mm hardened special‑steel shaft Individual delivery, traceable GTIN 4061905055638 Repeatable inspection with micrometre‑level tolerance A tolerance of ±0.001 mm positions this test pin in the category of ultra‑precise inspection tools for end‑measurements. Such tight accuracy reduces measurement variance and shortens decision cycles in quality control: fewer false rejections, shorter adjustment loops and a measurable improvement in first‑pass yield. The small nominal diameter of 3.61 mm ensures a close fit in bores and gauges where even slight deviations would otherwise require rework. Built for workshop rigour and stable seating Manufactured from special steel, the shaft and tip provide resistance to wear and maintain form under repetitive use. The 50 mm length offers a useful working span while remaining compact enough for fixture mounting or handheld checks; the low mass supports quick handling and minimal deflection. This construction translates into longer service life and more consistent seating in test fixtures, reducing the frequency of re‑measurement and tool replacement. Straightforward integration and traceability in production Marked with GTIN 4061905055638 and supplied as a single item, this precision pin is straightforward to log into inventory systems and to assign to inspection routines. The compact design fits into gauge blocks, inspection plates and dedicated jigs, enabling rapid comparison checks and assembly verifications. With a nominal weight of 0.007 kg, it is easy to manoeuvre during repetitive inspection tasks without operator fatigue. Confidence through certified supply and expertise Sourcing from a dedicated industrial line, this precision pin supports a predictable supply chain and consistent quality checks on the shop floor. Relying on a robust manufacturing partner shortens lead times and reduces uncertainty in procurement; Metav’s position as a precision partner further reinforces availability and service continuity, which is particularly important for serial production and calibration cycles. Contact Metav Werkzeuge for tailored advice on integrating the M323.361 into inspection routines or to request further technical documentation from our specialists Technical data Article number: M323.361 GTIN: 4061905055638 Manufacturer: Metav IndustryLine Facts Diameter: 3.61 mm Tolerance / Accuracy: ±0.001 mm Length: 50 mm Weight: 0.007 kg Special features Material: Special steel Delivery: single gauge pin Version: Workshop execution ECLASS: 21170231 FAQ What accuracy can be expected from this gauge pin? The gauge pin M323.361 is specified with an accuracy of ±0.001 mm, suitable for high‑precision end‑measurement tasks in production and inspection. Is the M323.361 suitable for fixture mounting and repeated use? Yes; the special‑steel construction and 50 mm shaft length provide stable seating and wear resistance appropriate for fixture mounting and frequent checks. How is the item supplied and how can it be traced in inventory? The pin is supplied as an individual item and is traceable via GTIN 4061905055638 and article number M323.361 for inventory systems. For which inspection tasks is this test pin typically used? Typical applications include verification of bore diameters, alignment checks in assemblies and reference measurements where micrometre‑level reproducibility is required. Who manufactures this gauge pin? The product is provided under the Metav IndustryLine; further procurement details and technical assistance are available from Metav Werkzeuge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.62mm Gauge Pin, Single, Tolerance ±0.001 mm, Length 50 mm, Workshop Version - Metav IndustryLine
Take advantage of the combination of micrometric accuracy (±0.001 mm), a compact 3.62 mm diameter and a robust 50 mm length for dependable end‑measurement tasks; the test pin is supplied in a transport‑safe box for secure handling and storage. Order directly from Metav Werkzeuge or request our specialist consultants for integration advice. Precision Gauge Pin M323.362 — 3.62 mm diameter, ±0.001 mm accuracy (50 mm length) the Precision Gauge Pin M323.362 is a single‑piece test pin designed for precise end measurements and dimensional checks in workshop and inspection environments Workshop version, robust execution Diameter 3.62 mm with ±0.001 mm accuracy 50 mm overall length for end measurements Supplied in transport‑safe box Reduce inspection time with micrometric certainty The core advantage of this measuring pin is its ±0.001 mm accuracy, which corresponds to one micron and supports reliable high‑precision checks without repeated remeasuring. When used for end‑position verification or small bore inspection, the reduced measurement uncertainty shortens decision loops in quality control. The fine 3.62 mm diameter enables access to narrow bores and tight features while maintaining a stable contact surface for repeatable results. Built for everyday workshop handling Manufactured in special steel and specified as a workshop execution, the pin tolerates frequent handling and routine use on the shop floor. The 50 mm length provides sufficient reach for many component geometries while keeping the tool compact and easy to seat in holders or chucks. Its lightweight construction contributes to simple manual positioning without excessive stress on fixtures, offering a balance between manoeuvrability and dimensional stability. Easy to integrate into inspection sets and inventory Delivered individually and supplied in a transport‑safe box, this single test pin is straightforward to store, identify and distribute across workstations. Clear labelling with SKU and GTIN supports traceability and inventory control, so the pin can be included in standard inspection kits or assigned to specific measuring stations. The compact format also simplifies replacement planning and reduces downtime when a matched spare is required. Traceability and practical identification for quality systems Each item is identified for straightforward record keeping, enabling documentation within inspection routines and audit trails. The combination of a defined nominal diameter, tight tolerance and an identifiable SKU means the component can be referenced in measurement reports and control plans. For workshops that demand consistent end‑measurement results, this precision pin forms a reliable entry in a metrology toolset. Contact Metav Werkzeuge for precise supplies and expert advice on integrating the M323.362 into production and inspection workflows Technical Data SKU: M323.362 GTIN: 4061905056284 Material: Special steel Version: Workshop execution Supplied: Transport‑safe box Label: Prüfstift, single test pin Facts Diameter: 3.62 mm Length: 50 mm Accuracy / Tolerance: ±0.001 mm Weight: 0.007 kg Special features Designed for end measurements Single‑piece construction Compact format for narrow bores Clear SKU and GTIN for traceability FAQ What accuracy can be expected from this pin? The Metav IndustryLine Precision Gauge Pin M323.362 delivers an accuracy of ±0.001 mm, suitable for micrometric end‑measurement tasks. What are the pin’s core dimensions? Nominal diameter is 3.62 mm and overall length is 50 mm; weight is approximately 0.007 kg. How is the pin supplied and stored? The test pin is supplied individually and packed in a transport‑safe box to protect the measuring face during transit and storage. For which inspection tasks is the pin intended? The pin is designed primarily for end measurements and dimensional checks of narrow bores, small shafts and similar features where a compact, high‑precision contact probe is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.63mm Test Pin ±0.001 mm Length 50 mm Workshop Version - Metav IndustryLine
Take advantage of workshop-ready robustness combined with micrometric accuracy for repeatable end‑dimension checks; the protective transport case preserves the pin in daily use. Order the M323.363 directly via Metav Werkzeuge or consult our specialists for application advice. M323.363 Gauging Pin — 3.63 mm diameter, ±0.001 mm tolerance, 50 mm length (Metav IndustryLine) The M323.363 gauging pin is a workshop-grade reference pin designed for precise end‑dimension checks, fixture alignment and repeatable inspection tasks in production and quality control environments. Workshop version for robust shop use Diameter 3.63 mm with ±0.001 mm accuracy Length 50 mm for fixture and end‑measure checks Supplied in protective transport case Precision that reduces measurement uncertainty Manufactured for applications where repeatability matters, this reference pin delivers a tolerance of ±0.001 mm, which places it in the high‑precision category for gauging elements. The nominal diameter of 3.63 mm is maintained along the measuring shaft to ensure consistent seating in bores and jigs; the narrow tolerance minimises variation between checks and supports tighter statistical process control. Where small dimensional deviations affect assembly fit or sealing, the micrometric specification of the pin helps transform single readings into reliable inspection data. Durable design for everyday workshop use The component is produced from special steel, balanced for hardness and corrosion resistance in a shop environment, and finished to a smooth contact surface that reduces wear on mating parts. At 50 mm overall length the pin is long enough for many fixture and end‑measure checks while remaining easy to handle. Delivery in a protective transport case preserves the measuring surface during storage and transport, reducing downtime for cleaning or rework and extending useful life under regular use. Integrates with inspection and fixture workflows As a reference element for end‑dimension verification and alignment, the pin fits into standard gauging sets and bespoke fixtures where a compact, precise locating feature is required. Its compact mass and consistent geometry make it suitable for comparative checks, go/no‑go fixtures and as a reference for optical or tactile measurement devices. The simple geometry also supports repeatable placement, which reduces operator‑induced variability and contributes to faster, more reliable quality checks on the shop floor. Confidence through traceable identification and pragmatic partnership The gauging element is identifiable via GTIN and conventional article coding, facilitating stock management and traceability in inspection records. Backed by Metav’s pragmatic approach to precision — a longstanding supply chain based in Emmerich and a broad portfolio of measurement tools — the product supports both small workshops and industrial users seeking dependable, affordable metrology. The combination of robust construction, tight tolerance and protected delivery provides peace of mind in routine production and inspection routines. Consult Metav Werkzeuge for specification matching and secure the M323.363 gauging pin with workshop protection — Metav Werkzeuge in Emmerich provides expert advice and reliable delivery. Technical Data Article number: M323.363 GTIN: 4061905056291 Label: Prüfstift, einzeln, 3,63mm, +/- 0.001 mm Länge 50 mm Brand: Metav IndustryLine Facts Diameter: 3.63 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.007 kg Special features Material: Special steel Version: Workshop execution Delivery: Protective transport case Typical use: End‑dimension checks, fixture alignment, inspection FAQ What tolerance does the gauging pin provide? The M323.363 gauging pin is manufactured to a tolerance of ±0.001 mm, making it suitable for high‑precision reference and inspection tasks. What material is used for this pin? This reference pin is made from special steel designed for shop use and a durable measuring surface. Is a protective case included with the product? Yes, the pin is supplied in a protective transport case to maintain the measuring surface during storage and transit. Can this pin be used for fixture alignment and end‑dimension control? The M323.363 is intended for fixture alignment and end‑dimension verification; its consistent geometry supports repeatable placement in gauging and inspection setups. How is the product identified for inventory and traceability? The item is listed with GTIN 4061905056291 and article number M323.363 for straightforward inventory and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3.64mm Gauge Pin, Single, ±0.001mm Accuracy, 50mm Length, Workshop Version - Metav IndustryLine
Take advantage of the combination of industrial ±0.001 mm accuracy, compact 3.64 mm diameter and robust workshop construction for reliable end‑dimension checks. Order the precision test pin directly via Metav Werkzeuge or ask our consultants if needed. M323.364 Precision test pin — 3.64 mm, ±0.001 mm (Metav IndustryLine) The M323.364 precision test pin is a single gauge pin designed for precise end‑measurement and gauging tasks in workshop inspection and fixture set‑ups. *Precision tolerance ±0.001 mm *Diameter 3.64 mm for tight fits *50 mm overall length for stable handling *Workshop‑grade construction in special steel Consistent accuracy for end‑dimension inspection A tight manufacturing tolerance of ±0.001 mm ensures reproducible results when checking bores, plugs and mating parts. The slim 3.64 mm diameter is suited to close‑fit gauges and verification of small holes or plug gauges, while the compact form reduces lever‑action errors during insertion. Built to support repeatable measurement routines, this precision pin helps to shorten inspection cycles and improve process reliability by reducing rework caused by uncertain fits. Durable, workshop‑ready design for everyday use Constructed from Special steel and supplied in a workshop specification, the pin combines wear resistance with handling comfort. At only 50 mm overall length and approx. 0.007 kg weight, it is easy to position in fixtures and to store on inspection benches; the short length also reduces bending moments that can affect accuracy. Supplied in a protective transport case, the pin is protected from damage and contamination during storage and transit, preserving surface quality and dimensional integrity for longer service life. Practical integration into quality workflows The gauge pin is ideal for routine end‑measurements in production control, first‑article inspection and jigs where repeatable plug fit is required. Its compact form factor makes it straightforward to incorporate into manual or semi‑automatic gauging stations, and the clear numerical specification supports traceable documentation in inspection reports. With the recognised SKU and GTIN for inventory management, this test pin suits workshops and inspection labs seeking dependable, easy‑to‑identify measuring artefacts. Order the M323.364 precision test pin from Metav Werkzeuge to secure high‑precision end‑measurements, or contact our technical advisors for application support and product selection Technical data Article number: M323.364 GTIN: 4061905056307 Brand: Metav IndustryLine Description: Precision test pin, single, 3.64 mm, ±0.001 mm, length 50 mm Core technical data Diameter: 3.64 mm Tolerance: ±0.001 mm Length: 50 mm Weight: 0.007 kg Special features Material: Special steel Workshop version Supplied in transport case Category: Gauge pin / test pin FAQ What is the manufacturing tolerance of this pin? The M323.364 precision test pin is manufactured to a tolerance of ±0.001 mm, suitable for high‑accuracy gauging tasks. Which dimensions define this gauge pin? Diameter is 3.64 mm and overall length is 50 mm; weight is approximately 0.007 kg. Is the pin suitable for workshop use? Yes, the workshop‑grade construction and special steel make the pin robust for regular inspection and fixture use. How is the pin delivered? The gauge pin is supplied in a protective transport case to prevent damage during storage and shipment. Can this pin be used for checking tight‑fit holes? The slim 3.64 mm diameter and tight tolerance make it well suited to verifying close‑fit bores and plug gauges. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Highest accuracy with immediate pass/fail certainty
Pin gauges (also known as gage pins or pin gauge sets) deliver micrometre-level certainty for bore, thread and radius inspection. Designed for industrial precision manufacturing, tool and mould making and quality assurance, these mechanical gauges provide an unequivocal physical result — pass or not pass — without reliance on electronics. The result is faster decision-making at the gauge or directly at the machine.
How pin gauges work in demanding production environments
Pin gauges are tactile reference tools for the quick verification of the smallest diameters, bore centres and form accuracy. Inserted into a bore or mating feature, a correctly sized pin gauge confirms dimensional conformity by fit; mismatches are immediately apparent. Their simple mechanical principle makes them ideal for in‑process checks on the shop floor as well as in the metrology room, and they are commonly used for bore inspection, internal thread checks, measuring tooth widths, assessing taper bores and setting indirect measuring devices.
Measurable benefits that matter on the shop floor
- Highest precision: available in standardized accuracy classes such as DIN 2269, with tolerances down to ±1 µm or ±2 µm, enabling reliable verification of the strictest quality requirements.
- Robust materials: manufactured from hardened gauge steel, wear‑resistant ceramic or carbide, providing long life under repetitive use.
- Exceptional surface quality: finely lapped and distortion‑free to ensure repeatable contact results.
- Clear identification: each pin is permanently and legibly marked with its nominal size, reducing errors during fast inspection cycles.
- Flexible supply: offered as individual pins or complete pin gauge sets in sturdy wooden cases for organised storage and rapid access.
Metav — practical precision for every workshop
Metav combines decades of metrology expertise with a comprehensive portfolio to democratise high‑accuracy measurement. From Emmerich, a “quality filter” for the European market, Metav supports industry and trade with over 250,000 products and the trust of more than 48,000 customers. That background makes Metav a pragmatic choice for workshops seeking reliable pin gauges and tailored inspection solutions.
Summary
For uncompromising micrometre accuracy in bore and form inspection, pin gauges and gage pins offer a direct, durable and process‑ready solution that reduces uncertainty and speeds up production decisions.
FAQ
What tolerance classes are available for pin gauges?
Pin gauges are supplied in standardised accuracy classes such as DIN 2269, with typical tolerances of ±1 µm or ±2 µm to meet rigorous industrial quality specifications.
Which materials are used for pin gauges?
Common materials include hardened gauge steel, wear‑resistant ceramic and carbide, selected according to the expected wear, handling and measurement environment.
How are pin gauges identified and stored?
Each pin is permanently engraved with its nominal size for unmistakable identification; sets are often supplied in organised wooden cases for safe storage and fast retrieval.
Can pin gauge sets be configured for specific series dimensions?
Yes. Metav’s range allows combination of individual pins into customised pin gauge sets, enabling tailored coverage for repetitive series dimensions and efficient inspection routines.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com