Precision angle gauges for reliable right-angle control
Angle gauges and inspection squares provide dependable verification of right-angle geometry and ensure accurate alignment in metalworking assemblies. Used for tasks ranging from rough marking with a machinist's square to high-precision verification with hardened and lapped control angles, these tools prevent fitment errors and functional faults by detecting even minute deviations from 90° and other set angles. For heavy-duty applications such as flange alignment in piping and vessel fabrication, robust flange squares offer stable seating on curved surfaces, while sine bars and adjustable angle gauges enable trigonometrically exact measurements for non‑standard angles. Regular calibration and inspection of leg flatness and wear are essential to maintain measurement integrity.
400 x 200mm Angle Plate With Stop, 35 x 7mm Cross-Section - TECWERK
Benefit from a DIN 875/II precision square with 400 x 200 mm legs and a rigid integral stop for dependable 90° set‑ups; robust cross‑section (35 x 7 mm) ensures long service life and stable clamping. Order via Metav Werkzeuge or consult their specialists for application advice. TECWERK Precision Square DIN 875/II — Legs 400 x 200 mm with Stop TECWERK Precision Square DIN 875/II is a workshop‑grade inspection square designed for reliable right‑angle layout, checking and fixturing in metalworking and inspection tasks. DIN 875/II accuracy class Legs 400 x 200 mm for versatile set‑up Cross‑section 35 x 7 mm for rigidity Integrated stop for repeatable positioning Precise 90° alignment for inspection and layout The square is manufactured to DIN 875/II, a recognised tolerance class for layout tools, providing consistent angular accuracy for routine inspection and assembly operations. The combination of a long leg and short leg (400 x 200 mm) delivers flexibility for larger components while maintaining a compact footprint. Because the body has a 35 x 7 mm cross‑section, the unit resists bending under light clamping, which leads to more reliable measurements during marking and checking. The precision is suitable for general workshop tasks and bench inspections where standard tolerance control is required. Stable set‑ups through an integral stop Equipped with a stop, the device enables repeatable positioning without auxiliary fixtures, reducing set‑up time and minimising alignment errors. The stop is particularly useful when performing multiple checks on a series of parts or when aligning edges to tooling jigs. By avoiding ad‑hoc butt points, the stop supports a consistent reference plane that simplifies process control and increases throughput in small production runs. Robust construction for workshop durability Constructed for everyday use, the angle tool combines a practical design with a sturdy cross‑section that tolerates normal workshop handling. The robust profile contributes to resistance against inadvertent flexing during clamping or light knocks, preserving angular fidelity over longer periods. Its design suits metalworking benches, inspection tables and toolrooms where a dependable right‑angle reference speeds layout work and reduces rejects caused by misalignment. Practical benefits and workplace efficiency Using a standardised inspection square accelerates layout tasks and clarifies quality checks by supplying a clear, repeatable reference. The tool’s standard conformity (DIN 875/II) eases documentation and process alignment across teams and suppliers, while the distinct leg lengths expand application options without needing multiple tools. Combined with Metav’s distribution and advice, the square integrates into workshop workflows as a reliable element for day‑to‑day measurement and set‑up routines. Contact Metav Werkzeuge for application guidance or to discuss how the TECWERK angle square fits into the workshop supply chain — email info@metav-werkzeuge.com or call +49 2822 7131930 for specialist advice and prompt delivery Technical data Article number: 2000858340NW UID: 2000858340NW Designation: Precision square DIN 875/II Facts Leg lengths: 400 x 200 mm Cross‑section: 35 x 7 mm Packaging unit: 1 Special features With stop Product type: Angle Brand: TECWERK FAQ What tolerance class does this inspection square conform to? The square is manufactured to DIN 875/II, so it meets the tolerance requirements associated with that class for workshop inspection tools. Can the tool be used for repeatable set‑ups on a series of parts? Yes, the integrated stop provides a reliable reference for repeatable positioning, making the TECWERK angle square suitable for series checks and repetitive layout tasks (SKU 2000858340NW). What makes the cross‑section important for workshop use? A 35 x 7 mm cross‑section increases rigidity and reduces flex under light clamping, helping to maintain angular accuracy during marking and inspection. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
400 x 230 mm Flat Galvanised Fabricator's Square, Flat - Metav IndustryLine
Robust zinc‑plated special steel construction and a precise 400 x 230 mm geometry provide reliable right‑angle control and durable performance for routine workshop alignment tasks. The flat profile and low weight enable easy handling and storage. Order the engineer's square, 400 x 230 mm, flat zinc‑plated directly via Metav Werkzeuge or ask our consultants if needed. Engineer's square, 400 x 230 mm, flat zinc‑plated — Metav IndustryLine The engineer's square, 400 x 230 mm, flat zinc‑plated is a flat, zinc‑finished machinist's square designed for marking, alignment and checking right angles in metalworking and general workshop environments. Flat zinc‑plated finish for corrosion resistance Special steel construction for stability 400 x 230 mm geometry for common workshop tasks Lightweight 0.7 kg for easy handling Trusted squareness for everyday measurements A precise right angle is the foundation of many workshop operations. The M214.508 model delivers a consistent 90° geometry through a robust, flat blade and stock arrangement. Crafted from special steel and finished zinc‑plated, the tool maintains alignment over repeated use while minimising fretting and surface wear. The 400 x 230 mm footprint is large enough for most bench projects yet compact enough for handheld checks, providing a dependable balance between reach and manoeuvrability. Practical design that speeds routine work The flat profile and modest mass translate into reduced fatigue during repetitive marking or checking. With an overall weight of 0.7 kg, this square is easy to lift, position and clamp without obstructing the line of sight or the scribing process. The simple geometry supports fast, repeatable set‑ups: align the stock against an edge, run the blade along the workpiece and mark or measure. The result is fewer alignment errors and a smoother workflow on daily production and repair tasks. Corrosion resistance and low maintenance The zinc‑plated finish affords basic protection against workshop humidity and mild contamination, delaying the onset of surface rust compared with bare steel. The flat design reduces crevices where debris can accumulate, making cleaning straightforward with a dry cloth or light oil. Manufactured to a workshop standard, the square is suitable for standard shop environments and requires only routine inspection to retain reliable performance. Stable, resilient construction for long service life The selection of special steel and the compact geometry combine to deliver structural stiffness where it matters most: at the junction between stock and blade. That stiffness supports repeatable squareness during scribing, layout and inspection operations. The straightforward construction also simplifies storage; lay the tool flat in a drawer or hang it on a rack to keep edges protected and ready for the next task. For supply from Metav Werkzeuge in Emmerich and tailored advice on the Metav IndustryLine engineer's square (M214.508), contact +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M214.508 GTIN: 4054469108957 Eclass: 21170129 Facts Dimensions: 400 x 230 mm Weight: 0.7 kg Tariff number: 90178090 Special features Material: Special steel, zinc‑plated Finish: Flat Norm: Workshop standard FAQ What applications suit this type of square? This engineer's square (M214.508) is intended for marking, alignment and right‑angle checks in metalworking, fabrication and general workshop tasks. What is the material and protective finish? The square is made from special steel and is zinc‑plated to provide basic corrosion resistance while keeping the surface easy to clean. How portable is the tool for everyday use? At approximately 0.7 kg and with a flat profile, the square is lightweight and simple to handle for frequent marking and inspection jobs. Does the product meet any workshop standards? The tool is manufactured to a workshop standard to ensure consistent geometry and robust behaviour in typical shop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400 x 265 mm Angle Square Flat, DIN 875/1, Carbon Steel - Metav IndustryLine
Take advantage of a robust reference tool that combines DIN 875/1 angle accuracy, flat ground faces and a practical 400 × 265 mm size for reliable alignment and inspection tasks; order the inspection square directly via Metav Werkzeuge or consult our specialists if guidance is required. Inspection square 400 × 265 mm (DIN 875/1) — Metav IndustryLine, standard steel The Inspection square 400 × 265 mm is a precision reference square intended for workshop inspection and setup tasks, offering DIN 875/1 accuracy for dependable right-angle checks in metalworking and quality control DIN 875/1 accuracy class Flat ground reference faces Dimensions 400 × 265 mm Reduce setup time with certified angle accuracy The square is manufactured to DIN 875/1, which guarantees a defined level of angular precision suitable for general industrial inspection. As a verified reference tool, this specification means the component can be used to check and align jigs, fixtures and machine set-ups with consistent results, reducing iteration and rework. The combination of a defined standard and a compact footprint makes the instrument an efficient choice where reproducible right-angle checks are required. Durable construction for everyday workshop use Made from standard steel with flat ground faces, the unit is engineered to withstand routine handling and provide long-term stability. The flat ground reference surfaces ensure intimate contact with workpieces and minimise rocking that could introduce error. At approximately 2.5 kg, the square provides the mass needed to sit steadily during inspection without being cumbersome to position by a single operator, supporting faster, more reliable measurements in daily production tasks. Integrates cleanly into quality workflows Identification details such as the SKU and GTIN support traceability within a quality-management system: the item is listed as M214.349 with GTIN 4054469108315. The clear standard reference and robust construction mean the square can serve as a shop-floor reference for visual and dimensional checks, helping to maintain conformity across batches. For workshops seeking a dependable reference square that balances practicality and metrology standards, this solution supports systematic quality checks without excessive complexity. For a verified DIN 875/1 reference square from Metav IndustryLine, contact Metav Werkzeuge GmbH via info@metav-werkzeuge.com or call +49 2822 7131930 to place an order or request technical guidance Technical data Article number: M214.349 GTIN: 4054469108315 Material: Standard steel Standard: DIN 875/1 Dimensions: 400 × 265 mm Weight: 2.5 kg Customs tariff number: 90178090 eClass: 21170119 Facts Dimensions: 400 × 265 mm Weight: 2.5 kg GTIN: 4054469108315 Article number: M214.349 Customs tariff number: 90178090 Special features Flat ground faces (flat) Standard steel construction Conforms to DIN 875/1 Category: Inspection square FAQ What level of angular accuracy does the square provide? The inspection square meets DIN 875/1, which specifies the tolerance class for right-angle reference squares and ensures suitability for standard workshop inspection tasks. Is the square suitable for routine machine set-up and jig checking? Yes, the Metav IndustryLine inspection square M214.349 is designed for workshop use, offering flat reference faces and a stable form factor for regular alignment and set-up checks. What material is used for the inspection square and how does that affect durability? Constructed from standard steel, the square offers robust durability for daily handling while its ground faces maintain measurement fidelity over time. How can the part be tracked within a quality system? The item is listed as M214.349 with GTIN 4054469108315, which allows straightforward traceability and inventory control in quality-management workflows. Is this square suitable as a shop-floor reference for routine inspections? Yes, the combination of DIN 875/1 conformity and flat ground faces makes this inspection square appropriate as a shop-floor reference for consistent visual and dimensional checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400 x 400 mm Flange Square Galvanised Without Packaging - Metav IndustryLine
The galvanised 400 × 400 mm flange angle combines robust special steel construction, precise flatness and a compact, lightweight form for fast alignment and fixture support. Benefit from durable corrosion resistance and straightforward handling to keep assembly and maintenance processes efficient. Order the flange angle directly via Metav Werkzeuge or consult the Metav team for specification advice. Flange angle 400 x 400 mm — galvanised special steel, workshop grade (Metav IndustryLine) A Flange angle 400 x 400 mm designed for aligning and supporting flanges, fixtures and small assemblies in fabrication and maintenance environments. Galvanised special steel for corrosion protection Flat 400 × 400 mm dimension for standard flanges For workshop and assembly alignment Lightweight: 1.3 kg for easy handling Faster alignment and fewer reworks on the production floor The square 400 × 400 mm format delivers a predictable datum for repetitive tasks, making the component suitable for jigs, temporary fixtures and flange alignment in metalworking and maintenance shops. The flatness of the face and the standardised external dimensions ensure consistent contact with mating parts, which reduces setup time and minimises corrective work. This results in a tangible improvement in process throughput where repeatable positioning is required. Practical handling that speeds up assembly work At just 1.3 kg, the angle offers a balance between stiffness and manoeuvrability, allowing single-person handling for many common tasks while maintaining the rigidity needed for short-span support. The compact, workshop-friendly format aids fast positioning and clamping; its lightweight nature reduces operator fatigue during repeated use. For maintenance teams and fabricators, this means quicker cycles and less time spent adjusting temporary supports. Corrosion protection and long service life explained Finished in a galvanised coating, the flange angle is protected against surface corrosion in typical workshop and indoor environments. The combination of galvanisation and special steel base material increases resistance to oxidation compared with bare steel, which extends the part’s service life and lowers replacement frequency. The galvanised finish also supports reliable clamping and repeatable measurements, preserving contact quality between the angle and the workpiece. Built to fit standard workshop practices Produced to a factory standard, the component is compatible with common clamping accessories and fixturing approaches. The simple geometry eases integration into existing assemblies or temporary fixtures and suits applications where a reliable, low-maintenance support element is required. The robust material choice and corrosion protection position the part as a practical, durable option for everyday industrial use. Contact Metav Werkzeuge for stock availability and application guidance on the Metav IndustryLine galvanised flange angle Technical data SKU: M214.541 GTIN: 4054469109138 Manufacturer: Metav IndustryLine Facts Dimensions: 400 x 400 mm Weight: 1.3 kg Material: Special steel, galvanised Standard: Werksnorm Customs tariff number: 90178090 Special features Workshop-grade galvanised finish Suitable for fixture and flange alignment Compact, lightweight design for easy handling FAQ Is the galvanised surface suitable for outdoor use? The galvanised finish provides enhanced corrosion resistance for typical workshop and sheltered outdoor conditions, but prolonged exposure to aggressive environments may require additional protection or checks. Can this angle be used for welding fixtures and tack-ups? Yes, the robust special steel construction is suitable for use in welding jigs and temporary fixtures; the galvanised coating should be considered if welding operations will come into direct contact with the coated surfaces. Does the component come with packaging? The product is supplied without packaging as specified on the label; this supports immediate deployment in the workshop and reduces packaging waste. What is the intended application area for this flange angle? The angle is intended for alignment, support and temporary fixturing in metalworking, fabrication and maintenance settings where a compact, corrosion-resistant support is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Angle Plate With Stop, Leg 400x265mm, 40x7mm Cross-Section - TECWERK
Take advantage of the combination of robust profile and DIN 875/I precision for consistent right-angle checks in production and inspection; order the item directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK precision square DIN 875/I — Precision square with stop, legs 400 x 265 mm The TECWERK precision square DIN 875/I is a precision measuring angle for workshop inspection and layout tasks, equipped with legs of 400 x 265 mm and a fixed stop for repeatable positioning. Precision to DIN 875/I standard Legs 400 x 265 mm for larger layouts Cross-section 40 x 7 mm for rigid profile Includes fixed stop for repeatable positioning Accurate right-angle checks to maintain part quality The robust construction of this precision angle delivers reliable 90° control for machining, inspection and assembly tasks. Manufactured in accordance with DIN 875/I, the tool provides a defined level of accuracy suitable for workshop and inspection benches, enabling consistent alignment and error detection. The marked leg dimensions and clear flat faces simplify reference alignment when checking squareness or setting up fixtures. Rigid design that resists twist and wear A 40 x 7 mm cross-section gives the square a stiff profile that resists bending under normal workshop use, ensuring the measured right angle remains stable over time. The rigid section reduces flex during handling and when used as a reference against flat surfaces, which supports repeatable measurements and reduces the need for frequent rechecking. This construction is particularly advantageous during layout tasks and repetitive inspection cycles. Fixed stop for repeatable positioning and faster setups The integrated fixed stop (mit Anschlag) adds a practical advantage for production work: parts and workpieces can be located against the stop for identical set-ups, reducing variability between operations. The stop simplifies recurring tasks such as marking, drilling jigs or verifying repeatable tool positions, turning a precision instrument into a time-saving aid on the shop floor. Suitable for workbenches and inspection stations With legs of 400 x 265 mm, the square covers larger surfaces while remaining compact enough for bench work and transport between stations. The combination of a long primary leg and a shorter return leg supports both broad layout control and confined checks near edges or in fixtures. Its specification makes it a flexible choice for metalworking shops, toolrooms and quality departments where clear, repeatable right-angle references are required. Contact Metav Werkzeuge for application advice or to source the TECWERK precision square directly from Emmerich — our consultants are available to discuss suitability for specific workshop tasks Technical Data Article number: 2000858441NW SKU: 2000858441NW Facts Legs (L x l): 400 x 265 mm Cross-section: 40 x 7 mm Packaging unit: 1 Special features DIN 875/I standard With fixed stop (mit Anschlag) Product type: Precision square Brand: TECWERK FAQ What accuracy standard does this square follow? The TECWERK precision square is specified to DIN 875/I, indicating it is produced to the precision grade named in that standard for measuring angles. Can this square be used for repeatable setups? Yes, the built-in stop enables repeatable positioning, making the square suitable for recurring layout and inspection tasks. What are the leg dimensions and why do they matter? The legs measure 400 x 265 mm, offering a long reference edge for larger layouts while retaining manoeuvrability at the bench. Is the profile robust enough for workshop use? The 40 x 7 mm cross-section provides a rigid profile designed to resist flexing under normal handling and repeated use. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
400mm Carpenter Square with 200mm Short Leg, Beech Handle Brass Fitting - TECWERK
A reliable mitred L-square that pairs a beechwood stock with a brass fitting and a blue steel blade for consistent layout accuracy; it is ideal for everyday carpentry and workshop use. Order the tool directly via Metav Werkzeuge or consult our specialists for fit and availability. TECWERK Carpenter's Square L 400 mm with Mitre, short leg 200 mm The TECWERK Carpenter's Square L 400 mm is a mitred layout square designed for precise right-angle marking and mitre checks in joinery and general carpentry. Beechwood stock with brass fitting Blue steel blade for clear markings Mitred L-shape: 400 mm long leg Short leg 200 mm for compact layouts Precision and stability for reliable layout work A solid layout tool must give repeatable results on every job. The combination of a beechwood stock and a brass fitting keeps the square stable when pressed against timber, reducing slip and wear during frequent use. The blue steel blade provides a defined contrast for marking lines, while the mitre construction ensures accurate 45° checks as well as right-angle layout. These design choices translate into measurable time savings on repetitive marking tasks and fewer reworks in production or site environments. Faster marking and handling on the bench Ergonomics and clear graduations matter where speed and clarity are required. The L-shape with a 400 mm long leg and a 200 mm short leg balances reach and manoeuvrability: the longer side covers larger panels for rapid layout, while the shorter side eases marking near edges and in confined spaces. The wooden stock absorbs minor impacts and sits comfortably in the hand, enabling quicker alignment and more consistent line work for both rough carpentry and fine joinery. Built for everyday workshop use and longevity Durability is essential for a tool that is used daily. The combination of a treated wooden stock and a metal blade with a protective finish reduces the risk of deformation and corrosion under normal workshop conditions. The brass fitting resists burr and wear at the junction point, maintaining the square’s geometry over time. For workshops that demand dependable hand tools, this mitred L-square offers a practical balance of precision and robustness that supports consistent workmanship. For dependable mitred layout and everyday workshop precision, choose the TECWERK Carpenter's Square via Metav Werkzeuge — contact Metav Werkzeuge for availability and technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 2000858536NW Item name: Schreinerwinkel Schenkel-L.400mm m.Gehrung Kurzer Schenkel 200mm TECWERK Packaging unit: 1 Data Long leg: 400 mm Short leg: 200 mm SKU: 2000858536NW Special features Beechwood stock Brass fitting Blue steel blade Mitre construction FAQ What materials is the square intended for? The square is intended primarily for timber work; the TECWERK Carpenter's Square L 400 mm is optimised for joinery and general carpentry marking and mitre checking. Is the blade resistant to corrosion? The blade features a blue protective finish which improves visibility and offers basic resistance to surface corrosion under normal workshop conditions. How does the mitre feature help in practice? The mitre construction allows 45° checks and simplifies transfer of mitre angles; the geometry also maintains accurate 90° layout when used as a standard square. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
400mm L-Flange Angle 115x65mm Flange Width 30 x 5 mm - TECWERK
Take advantage of the precise combination of clear dimensions and standardised mounting that this bracket provides: the defined L‑legs 400 x 400 mm and flange spacing 115 x 65 mm result in a predictable, space-efficient mounting solution for workshop assemblies; order the part directly via Metav Werkzeuge or consult our specialists for specification guidance TECWERK flange angle bracket — L‑legs 400 x 400 mm, flange spacing 115 x 65 mm The TECWERK flange angle bracket is a heavy‑duty L‑shaped mounting component designed for standard workshop and industrial flange connections, offering fixed leg lengths and a defined flange footprint for consistent alignment L‑legs 400 x 400 mm Flange spacing 115 x 65 mm Cross-section 30 x 5 mm SKU 2000858411NW TECWERK Predictable alignment through fixed leg dimensions The bracket’s defining geometry — L‑legs 400 x 400 mm — creates a repeatable reference for assemblies where precise leg length is necessary. Fixed leg dimensions reduce measurement work on site and simplify planning for jigs, fixtures and structural joins. Where accurate edge distance and cantilever length matter, these set lengths enable consistent positioning and easier duplication of mounting points across multiple units, improving throughput in small and medium production runs while reducing layout errors Flexible mounting with a clear flange footprint With a flange spacing of 115 x 65 mm, the part offers a compact, rectangular mounting area that suits many standard flange arrangements. The cross-section of 30 x 5 mm indicates the bracket’s sectional profile and gives a tangible reference for stiffness and bending resistance under typical fastening conditions. Translating these figures into practice, the flange footprint aids load distribution and simplifies choice of fasteners and spacings — benefitting engineers who require clear, comparable data when integrating components into larger assemblies Workshop-ready specification and procurement efficiency The concise specification and single SKU simplify ordering and inventory management for procurement teams. The bracket’s standard dimensions make it straightforward to reference in bills of materials and CAD libraries, reducing ambiguity during purchasing and assembly preparation. Combined with Metav’s role as a distributor and quality gate for the European market, this product supports reliable supply chains and consistent component quality for industry and craft alike Contact Metav Werkzeuge for delivery from Emmerich and expert advice on the TECWERK flange angle bracket — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000858411NW Brand: TECWERK Product type: Flange angle bracket Facts L‑legs (mm): 400 x 400 Flange spacing (mm): 115 x 65 Cross-section (mm): 30 x 5 Packaging unit: 1 Special features L‑shaped legs for flange mounting Defined rectangular flange footprint Standard dimensions for workshop use FAQ What are the exact leg dimensions of the bracket? The legs measure 400 x 400 mm on the TECWERK flange angle bracket, providing clear reference lengths for fixtures and structural joins What is the flange spacing for mounting holes or flanges? The flange spacing is 115 x 65 mm, representing the rectangular mounting footprint of the TECWERK flange angle bracket What does the cross-section of 30 x 5 mm represent? The cross-section of 30 x 5 mm denotes the sectional profile of the bracket and is a practical indicator of the profile’s stiffness under standard fastening conditions In which applications is this angle bracket typically used? This bracket is intended for flange connections, structural joins and workshop mounting tasks where defined leg lengths and a compact flange footprint are required Which SKU should be referenced when ordering this part? Reference SKU 2000858411NW for the TECWERK flange angle bracket when specifying or ordering the component Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
400mm x 200mm Angle Plate L‑Shaped Without Stop, 35 x 7 mm Cross‑Section - TECWERK
Combine workshop-grade DIN 875/II accuracy with long, stable legs and a robust 35 x 7 mm cross-section to ensure reliable layout and inspection on large assemblies; order the TECWERK unit directly via Metav Werkzeuge or consult our specialists for application support. TECWERK Engineer’s Square DIN 875/II – Legs 400 x 200 mm, without stop The TECWERK Engineer’s Square DIN 875/II is a precision layout and inspection tool for workshops and production lines, designed for accurate right-angle referencing on larger components. Precision class DIN 875/II Legs 400 x 200 mm for extended reach Cross-section 35 x 7 mm for stable alignment Execution without stop for unobstructed marking Accurate referencing for large assemblies The DIN 875/II classification indicates a workshop-appropriate level of squareness that balances accuracy and durability. As a precision engineer’s square, this tool provides a dependable 90° reference for layout, assembly checks and visual inspection. The combination of standardised tolerance class and steady geometry reduces setup time and minimises rework caused by misaligned components, supporting smoother production workflows and repeatable results. Robust geometry for everyday workshop use A substantial cross-section of 35 x 7 mm and long legs of 400 x 200 mm create a stiff reference that resists bending and twisting during routine use. The elongated blade and stock geometry make the square suitable for marking and checking larger workpieces where short squares lack reach. The solid construction also eases manual handling and gives a firm datum for scribing operations, improving consistency when transferring layout lines across an assembly. Unobstructed layout when a stop is not required This version is supplied without stop, which removes any heel or protrusion that might interfere with continuous marking along long edges. The open execution simplifies alignment on parts where a stop would obstruct the workpiece or prevent full-length contact. For applications requiring an uninterrupted straight edge for scribing or comparative checks, the absence of a stop increases flexibility and speed during layout tasks. Practical integration, maintenance and routine checks To preserve squareness and service life, store the square flat and avoid impacts that could distort the blade or stock; perform periodic flatness and squareness checks against a known reference surface. If uncertainty arises about conformity or suitability for a special task, Metav Werkzeuge provides technical guidance and can advise on integration into measurement routines. Regular inspection and careful handling maintain the tool’s reliability for long-term workshop use. Contact Metav Werkzeuge for tailored technical advice or to arrange supply of the TECWERK engineer’s square — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 2000858240NW Name: Winkel DIN 875/II Schenkel-L.400x200mm o.Anschlag Product type: Engineer’s square Execution: without stop Manufacturer: TECWERK Packaging unit: 1 Key Measurements Legs L. [mm]: 400 x 200 Cross-section: 35 x 7 mm SKU/UID: 2000858240NW Special features Precision class DIN 875/II Execution without stop Suitable for layout, inspection and scribing tasks FAQ How accurate is the square for workshop layout tasks? The TECWERK engineer’s square meets the DIN 875/II designation, offering workshop-grade squareness suitable for layout, inspection and assembly checks where class II tolerances are appropriate. Can this square be used on large workpieces? Yes; the long legs of 400 x 200 mm provide the extended reach required for larger components and assemblies, making the tool well suited to longer edge checks and marking tasks. What does 'without stop' mean in practice? Execution without stop means the square has no heel or protruding stop, allowing unobstructed contact along long edges and enabling continuous scribing without interference. How should the square be stored and maintained to retain accuracy? Store the square flat and protected from impacts, clean off debris after use, and perform periodic squareness checks against a certified reference surface to ensure ongoing accuracy. Is the square suitable for precision inspection as well as marking? The square is designed for both marking and routine inspection within the scope of DIN 875/II; for high-precision metrology beyond class II, consult technical specialists at Metav Werkzeuge for recommendations. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
400mm x 230mm Fitters Square Without Stop, 25 x 5 mm Cross-Section - TECWERK
A reliable choice for workshop layout: the TECWERK machinist's square combines a 25 x 5 mm cross-section with legs measuring 400 x 230 mm to provide a stable reference for large-format right-angle checks; supplied without a stop for greater flexibility. Order the TECWERK square directly via Metav Werkzeuge or ask our consultants for specification support. Schlosserwinkel Schenkel‑L.400x230mm – TECWERK machinist's square, 400 x 230 mm legs A practical Schlosserwinkel Schenkel-L.400x230mm machinist's square designed for workshop layout, right‑angle verification and fabrication tasks, supplied without a stop. Robust 25 x 5 mm cross-section Legs 400 x 230 mm for large layouts Without a stop for adaptable use Single unit delivery Greater accuracy through a rigid reference edge The pronounced 25 x 5 mm profile provides a rigid reference that reduces deflection during marking and inspection, which directly improves repeatability on the shop floor. The larger cross‑section increases stiffness compared with slimmer profiles, so the edge remains straight under hand pressure and when used against flat surfaces. This effect is particularly beneficial for layout work where consistent right angles are required across multiple components, reducing rework and improving throughput. Designed for wide-format layout and versatile applications With legs of 400 x 230 mm, the square covers generous distances for marking, scribing and checking assemblies without the need for secondary tools. The omission of a stop (supplied without a stop) allows the tool to be used against uneven surfaces or incorporated into bespoke fixtures; the open design supports welding setups, sheet‑metal layout and bench fabrication equally well. For workshops that perform mixed trades—metalwork, fabrication or general maintenance—the combination of reach and simplicity reduces tool change time and supports efficient workflow. Practical supply and clear identification for procurement Delivered as a single unit, the item is easy to stock and trace in inventory systems; the product is listed under SKU: 2000858040NW for straightforward reordering. The clear specification of leg dimensions and cross‑section helps purchasing make an informed decision without guesswork, while the uncomplicated design minimises maintenance and inspection needs. For additional specification questions or compatibility checks, Metav Werkzeuge offers technical assistance and detailed product guidance. Contact Metav Werkzeuge today to add the TECWERK machinist's square to your workshop kit or to discuss application-specific details – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000858040NW Label: Schlosserwinkel Schenkel-L.400x230mm o.Anschlag TECWERK Brand: TECWERK Facts Legs (L x L): 400 x 230 mm Cross-section: 25 x 5 mm Packaging unit: 1 Special features Supplied without a stop Product type: machinist's square Execution: without a stop FAQ What are the exact leg dimensions of the square? The legs measure 400 x 230 mm as specified for the Schlosserwinkel Schenkel-L.400x230mm from TECWERK. What does the 25 x 5 mm cross-section mean in practice? The 25 x 5 mm cross-section denotes the profile size of the reference edge; this dimension increases stiffness and supports consistent right‑angle checks during layout tasks. Is the square supplied with an integrated stop? No, the tool is supplied without a stop, which allows flexible use against irregular surfaces or incorporation into custom jigs. How is the product identified for reordering? Reorder using SKU 2000858040NW; this identifies the TECWERK machinist's square with legs 400 x 230 mm and the specified cross‑section. Which tasks is this square best suited for? Best suited for workshop layout, scribing, right‑angle verification and fabrication tasks where a robust, straightforward reference tool is required. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
400mm x 230mm Machinist Square With Stop, 25 x 5 mm Cross-Section - TECWERK
Take advantage of the rigid L‑profile and integrated stop to achieve dependable right‑angle layout and repeatable positioning; the robust 25 x 5 mm cross‑section minimises flex for cleaner marking and inspection. Order directly via Metav Werkzeuge or consult Metav's specialists for suitability and delivery options. TECWERK L‑shaped machinist's square with stop — 400 × 230 mm The TECWERK L‑shaped machinist's square with stop is a workshop layout and inspection tool designed for precise right‑angle referencing and repeatable positioning in metalworking and general fabrication tasks. L-shaped construction for stable right angles Integrated stop for repeatable positioning Cross-section 25 x 5 mm for stiffness and durability Precision use in workshop and metalworking Accurate right‑angle layout that speeds setup The L‑profile delivers a consistently true right angle, making it straightforward to transfer reference lines and check squareness on components and assemblies. With the primary legs sized 400 × 230 mm, the square covers a useful working span for benches and larger plates, while the integrated stop enables rapid, repeatable positioning when marking series of identical parts. The result is a reduction in setup time and fewer rework cycles, which supports a more efficient production flow. Stable construction for reliable marking and inspection A 25 x 5 mm cross‑section provides the section modulus needed to resist bending during routine use; this stiffness translates into crisper scribe lines and more reliable inspection readings. The L‑shaped profile is engineered for hand‑held layout and for use against flat reference surfaces, where stability and tactile feedback matter. The stop attachment permits consistent contact against edges, so the same datum is reproduced every time without complex fixturing. Practical benefits across common workshop tasks In everyday fabrication, the square assists with marking, checking welded frames, aligning machine parts and verifying the squareness of mounted assemblies. The integrated stop suits repetitive tasks such as serial marking or setting offsets on a workbench; the form factor also allows straightforward storage and rapid retrieval. For quality control, the tool supports visual inspection and preliminary acceptance checks before more elaborate metrology is applied. For dependable right‑angle work choose the TECWERK L‑shaped machinist's square; contact Metav Werkzeuge for product advice or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000858140NW Label: Schlosserwinkel Schenkel-L.400x230mm m.Anschlag TECWERK SKU / UID: 2000858140NW Dimensions & measurements Legs: 400 x 230 mm Cross-section: 25 x 5 mm Packaging unit: 1 Special features Execution: with stop (mit Anschlag) Product type: machinist's square (Schlosserwinkel) Manufacturer: TECWERK FAQ What materials is this square intended for? The TECWERK L‑shaped machinist's square is a general‑purpose workshop tool designed for layout and inspection tasks across metalworking and fabrication environments; the square itself is specified by its geometry rather than by a single material designation. How does the integrated stop improve workflow? The integrated stop on the TECWERK L‑shaped machinist's square (SKU 2000858140NW) enables repeatable positioning against an edge, which speeds serial marking and reduces variation between parts. Can the square be used for inspection as well as marking? Yes — the square’s L‑profile and stiff 25 x 5 mm cross‑section make it suitable for quick visual inspection and initial squareness checks before applying more precise metrology. Is the size suitable for bench and plate work? With legs of 400 × 230 mm, the square offers a practical working span for bench‑level layout and moderate plate work, combining reach with convenient handling. How should the square be cared for to maintain accuracy? Routine care for the square involves keeping reference faces clean and free of burrs; the stop and faces should be checked visually and protected from knocks to preserve repeatable positioning. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
400mm x 265mm Angle Plate Without Stop, 40 x 7 mm Cross-Section - TECWERK
Take advantage of the combination of DIN 875/I accuracy, robust leg dimensions and a slim cross-section for precise right-angle checks in metalworking and toolrooms. Order the TECWERK engineer's square directly via Metav Werkzeuge or consult our specialists for application advice and supply security. TECWERK engineer's square DIN 875/I, legs 400 x 265 mm A TECWERK engineer's square DIN 875/I is designed for precise right-angle verification in workshops and industrial metrology, suitable for layout, inspection and jig setup DIN 875/I accuracy class Legs 400 x 265 mm for large workpieces Robust 40 x 7 mm cross-section Supplied without stop for flexible setup Precision that supports production reliability The DIN 875/I tolerance class signals a high standard of squareness and repeatability, making this tool suitable for demanding inspection tasks and layout work. The combination of the defined tolerance and the relatively slim 40 x 7 mm cross-section allows stable contact on edges while minimising interference with small features. For quality control in machine shops or assembly lines, this results in faster verification cycles and reduced rework, as deviations from 90° can be detected reliably before downstream processes begin. Designed for larger components and stable handling With legs measuring 400 x 265 mm, the square offers ample reach for larger plates, castings and fabricated assemblies without sacrificing control. The longer leg gives an extended reference surface while the shorter leg improves manoeuvrability in confined spaces. The geometry is tailored to enable accurate alignment and marking on sizeable workpieces, which reduces the need for repositioning and contributes to more consistent machining outcomes and tighter tolerance adherence. Flexible use thanks to the simple execution The execution without stop provides flexibility when clamping against irregular or contoured edges; the tool can be positioned freely to suit the task rather than being constrained by a fixed flange. This simplicity supports varied workflows—from bench layout to workshop inspection—because the square adapts to the workpiece instead of forcing a particular setup. The result is a practical measuring and checking instrument that fits into existing processes with minimal adjustment. Clear technical benefits and practical guidance The slim cross-section and defined leg lengths make the instrument easy to integrate into inspection procedures and jigs. As a precision square, it serves both as a measuring standard for right angles and as a layout aid. For users unfamiliar with DIN tolerance classes: DIN 875/I denotes one of the tighter classes of engineer's squares, intended for professional metrology tasks. If further technical specifications or usage recommendations are required, Metav Werkzeuge can provide supplementary data and application support. Contact Metav Werkzeuge for expert advice on TECWERK precision squares and to secure reliable supply from Emmerich; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: 2000858449NW Product type: Engineer's square Brand: TECWERK Execution: without stop Dimensions Legs (L): 400 x 265 mm Cross-section: 40 x 7 mm Packaging unit: 1 Special features DIN 875/I accuracy class Suitable for layout and inspection tasks Slim blade for edge access No fixed stop for flexible positioning FAQ What tolerance class does this square conform to? The square conforms to DIN 875/I, indicating a high-precision engineer's square suitable for professional inspection and layout. Can the square be used on large plates and assemblies? Yes, the 400 x 265 mm leg dimensions provide extended reach for larger components while maintaining stable contact for accurate right-angle checks. Is the square supplied with a stop or flange? This execution is supplied without stop, offering flexibility in positioning and clamping for varied workshop tasks. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
400x200 mm Angle Stop With Stop Feature, DIN 875/2 - Metav IndustryLine
Take advantage of a robust, standards‑compliant design combined with stable handling and clear packaging for reliable right‑angle checks in the workshop. Order the Precision Engineer's Square directly via Metav Werkzeuge or consult our specialists for application advice. Precision Engineer's Square M214.578 – 400 x 200 mm, DIN 875/2 (Metav IndustryLine) The Precision Engineer's Square M214.578 serves as a DIN‑classified reference for accurate 90° alignment and setup tasks in mechanical workshops and quality control environments. DIN 875/2 class for high angular accuracy 400 x 200 mm measuring faces for stable support Made from mild steel for long service life Supplied with stop in cardboard box Accurate angle reference for production and inspection The square is built to provide a dependable right‑angle reference in routine inspection and machine set‑up work. Conformance with DIN 875/2 indicates that the tool meets recognised workshop standards for angular integrity, so checks and alignments are based on a repeatable physical reference rather than estimation. Using a standardised reference reduces rework and supports process stability in both small‑batch fabrication and serial manufacturing, delivering a clear efficiency advantage when angle control is part of the quality chain. Robust construction that reduces measurement uncertainty Manufactured from mild steel, the unit combines mass and rigidity to minimise deflection during contact and to keep the faces stable under light clamping or positioning forces. The nominal dimensions 400 x 200 mm strike a useful balance between reach and stiffness: broad measuring faces give a secure seating on workpieces while remaining compact enough for bench use. The integrated stop simplifies repetitive positioning tasks and contributes to consistent placing of components, which in turn lowers scatter in subsequent inspection data. Practical handling and workshop integration The measuring faces of this reference tool are ground to provide a flat, continuous contact area that supports typical layout, inspection and fixture tasks. At around 3.2 kg, the tool is heavy enough to stay put during normal use yet readily manoeuvrable for operator handling and storage. Supplied in a protective cardboard box, the square arrives ready for immediate use or for safe filing between operations. The solid, no‑nonsense design suits everyday workshop environments and complements inspection benches, milling setups and assembly jigs where a reliable right angle is required. Choose the Metav IndustryLine reference square for secure, standards‑based angle control — contact Metav Werkzeuge for supply and expert guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M214.578 GTIN: 4054469109305 Weight: 3.2 kg Dimensions: 400 x 200 mm Standard: DIN 875/2 Tariff number: 90178090 Facts Measuring faces: 400 x 200 mm Mass: 3.2 kg Boxed packaging: cardboard box Material: mild steel Special features With stop Ground measuring faces for stable contact Metav IndustryLine product Suitable for workshop inspection and setup tasks FAQ What level of angular accuracy does this square provide? The Precision Engineer's Square M214.578 is manufactured to DIN 875/2, providing a recognised level of angular integrity suitable for workshop inspection and alignment tasks. Is the square supplied ready for use or does it require preparation? The Metav IndustryLine reference square is delivered in a cardboard box and ready for immediate use on benches or in fixtures; no additional preparation is required. Which materials is the square suitable for checking and aligning? The square's mild steel construction and ground faces make it appropriate for alignment and inspection of common metal components, jigs and fixtures in machining and assembly contexts. Can the stop be used for repetitive positioning during measurement tasks? Yes, the integrated stop facilitates repeatable positioning and helps reduce variability when performing successive right‑angle checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x200 mm Inspection Square Flat Stainless Hardened, DIN 875/2, Cardboard Box - Metav IndustryLine
Combine DIN 875/2 accuracy with a hardened stainless-steel construction and a flat profile to secure reproducible right-angle checks on the shop floor; order the inspection square directly via Metav Werkzeuge or request specialist advice if required. Inspection square 400 x 200 mm, DIN 875/2 — Hardened stainless-steel control square (Metav IndustryLine) The Inspection square 400 x 200 mm is a hardened stainless-steel control square designed for precise 90° verification in workshop inspection, assembly and quality‑control processes. Hardened stainless-steel construction DIN 875/2 accuracy class Flat profile for straightforward alignment Supplied in cardboard box Precision that supports decision‑making The inspection square meets DIN 875/2, a recognised tolerance class for control squares, which makes it suitable for routine verification tasks where dependable geometry is required. Thanks to the standardised tolerance, measurements performed with this tool provide a clear, comparable basis for go/no‑go decisions during incoming inspection or assembly checks. The calibrated geometry enables consistent right‑angle assessment and reduces uncertainty in alignment tasks. Robust construction for daily workshop use Manufactured from hardened stainless steel, the tool resists wear and maintains its reference surfaces over repeated use. The flat profile reduces contact play when aligning components and aids visual confirmation against reference edges. The solid build delivers mechanical stability during handling and minimises the risk of distortion under normal workshop stresses, supporting consistent results across multiple shifts. Practical handling and protective packaging At 400 x 200 mm, the format balances reach and manoeuvrability: long enough to span typical fixtures yet compact enough for single‑operator alignment work. Supplied in a cardboard box, the instrument arrives protected for storage and transport while remaining easy to access for frequent use. The combination of size and packaging makes the square a convenient tool for bench checks, machine set‑ups and inspection stations. Reliability from a specialist supplier As part of the Metav IndustryLine range, this control square benefits from the distributor’s emphasis on accessible precision and dependable supply. Metav’s product selection and logistics underpin a straightforward procurement path for workshops and small‑series manufacturers; the company’s market presence supports repeatable availability and consistent product quality. Choosing this tool supports long‑term routine control processes and contributes to measurable quality assurance. Select the Metav IndustryLine inspection square for repeatable right‑angle checks — order from Metav Werkzeuge in Emmerich or request technical advice by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M214.369 GTIN: 4054469108476 Weight: 2.5 kg Material: stainless steel, hardened Standard: DIN 875/2 Dimensions & measurable data Size: 400 x 200 mm Profile: flat Net weight: 2.5 kg Special features Supplied in cardboard box Flat profile for alignment Hardened stainless-steel construction FAQ What tolerance class does the inspection square conform to? The inspection square conforms to DIN 875/2, providing a standardised tolerance suitable for routine workshop and inspection tasks. Is the tool suitable for regular shop‑floor use? Yes; the hardened stainless‑steel construction and flat profile make the Metav IndustryLine control square robust enough for frequent checks and alignment work. What are the working dimensions and how do they affect handling? The tool measures 400 x 200 mm, a format that offers a balance between reach and manoeuvrability for typical assembly and inspection operations. How is the inspection square delivered? The instrument is supplied in a cardboard box, ensuring protection in transit and simple storage ready for immediate use. Is the material corrosion‑resistant? The square is made from stainless steel and is hardened for wear resistance, offering good corrosion performance in standard workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x200 mm Inspection Square Flat, DIN 875/2, Cardboard Box - Metav IndustryLine
Take advantage of the combination of DIN 875/2 conformity, robust carbon steel construction and a compact, transport-safe design for repeatable right-angle checks in the workshop. Order the inspection square directly via Metav Werkzeuge or ask the consultants for application advice. Inspection square M214.558 — 400 x 200 mm, DIN 875/2 (Metav IndustryLine) A Inspection square M214.558 engineered as a right-angle reference for workshop inspection, setup and quality control tasks DIN 875/2 accuracy class Size: 400 x 200 mm working faces Robust carbon steel construction Supplied in protective cardboard box Precision that keeps production aligned The control geometry follows DIN 875/2, providing a reliable right-angle reference for incoming inspections, machine set-up and jig verification. The defined tolerance class ensures measurements are comparable across shifts and tools, reducing rework and downtime. With clear conformity to the standard and a stable measuring face, this instrument supports consistent decision-making in small-batch production and routine quality control, delivering measurable efficiency gains. Durable construction for everyday workshop use Manufactured from carbon steel and finished for a flat measuring surface, the gauge combines mass and stiffness to resist deformation under handling. The substantial mass (approx. 2.5 kg) helps stabilise the tool during contact checks, while the machined faces preserve squareness over repeated use. The robust build reduces the need for frequent replacement and keeps calibration intervals practical for typical workshop cycles, translating into lower lifetime maintenance effort. Practical handling and storage that speeds workflows At 400 x 200 mm the format balances reach and manoeuvrability: large enough for most assemblies yet compact for benchtop checks and tight set-ups. The inspection square is supplied in a protective cardboard box, simplifying secure transport between workstations and preventing face damage during storage. Delivered as a ready-to-use right-angle control, it integrates into routine inspection stations and layout benches with minimal adaptation while carrying the quality assurance expected from the Metav IndustryLine range. For robust and standard-compliant right-angle inspection choose the Metav IndustryLine M214.558 and contact Metav Werkzeuge GmbH in Emmerich for specialist advice and purchase enquiries via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M214.558 GTIN: 4054469109220 Category path: Winkel (Angle gauges) Tariff code: 90178090 Image size (px): 400x265 Facts Weight: 2.5 kg Measuring faces: 400 x 200 mm Standard: DIN 875/2 Special features Material: Normalstahl (carbon steel) Flat design Supplied in cardboard box Compact format for workshop use FAQ What tolerance class does this square meet? The inspection square M214.558 conforms to DIN 875/2, providing the accuracy class required for routine workshop right-angle verification. Which tasks is the square suitable for? The control square is intended for right-angle checks during machine set-up, component inspection and jig alignment where a 400 x 200 mm working face is appropriate. Is the square ready for immediate use on arrival? Yes, the M214.558 is supplied ready for inspection tasks and packed in a protective cardboard box for safe transport and storage. How should the square be cared for to preserve accuracy? Keep the measuring faces clean and dry, avoid impact or dropping, and store the square in its box when not in use; periodic inspection of the faces will help maintain squareness. Can the square be used as a reference for fixture construction? Its flat, machined faces and DIN 875/2 conformity make the square suitable as a workshop reference during the construction and checking of fixtures and small assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x200mm Angle Stop Square With Stop, Hardened Stainless Steel, DIN 875/2 - Metav IndustryLine
Robust, DIN‑compliant and built for repeatability: the hardened stainless steel construction and integrated stop ensure consistent squaring and secure fixture positioning in the workshop; order directly via Metav Werkzeuge or consult their specialists for delivery and technical advice. Precision angle square M214.379 – 400 × 200 mm, hardened stainless steel (DIN 875/2) | Metav IndustryLine The Precision angle square M214.379 is a hardened stainless steel engineer's square designed as a fixed stop and reference for workshop layout, inspection and machine setup tasks. Hardened stainless steel construction Precision to DIN 875/2 standard Integrated stop for repeatable positioning Precision where repeatability matters The device is designed to deliver precision in routine layout and inspection work. Manufactured from hardened stainless steel, the body resists wear on the measuring faces so that squareness is preserved through repeated use. Conformity to DIN 875/2 signals that the square meets recognised workshop accuracy criteria, providing a reliable datum for alignment tasks and right‑angle checks. This reliability reduces rework and supports consistent production tolerances, making setup and inspection steps faster and more predictable. Durability that withstands workshop demands Built-for-purpose material selection ensures corrosion resistance and longevity in demanding environments. The substantial construction (weight serves to stabilise the tool) and hardened surfaces give a measured feel when used as a stop or reference, while the integrated stop enables secure, repeatable positioning of workpieces or jigs. Supplied in a protective cardboard box for safe transport, the design is intended to keep the instrument serviceable with minimal maintenance, lowering total cost of ownership through fewer replacements and less downtime. Practical use, clear benefits for machinists As a dedicated squaring and stop tool, this angle square simplifies fixture alignment and layout operations in both production and maintenance contexts. The flat, hardened faces permit quick verification of right angles on parts and assemblies, aiding setup for milling, drilling and assembly processes. Traceable conformity and robust workmanship foster measurement confidence during inspection routines, while the compact footprint supports manoeuvrability at the bench. For workshops seeking a durable reference square that combines ease of use with industrial standards, this instrument is a practical choice. Enquire with Metav Werkzeuge for procurement or technical details on the M214.379 — Metav's sales team in Emmerich can advise on delivery, compatibility with workshop processes and supply logistics (info@metav-werkzeuge.com | +49 2822 7131930) Technical data Article number: M214.379 GTIN: 4054469108551 Manufacturer: Metav IndustryLine Material: hardened stainless steel Standard: DIN 875/2 Weight: 3.2 kg Facts Measuring faces / reference size: 400 × 200 mm Tariff number: 90178090 Special features Integrated stop for positioning Hardened measuring faces Supplied in cardboard box Category: Angle / square for workshop use FAQ What level of accuracy does this angle square provide? The angle square M214.379 conforms to DIN 875/2, which classifies its squareness and is suitable for workshop and inspection tasks requiring reliable right‑angle references. Is the instrument suitable for use in humid or corrosive workshop environments? Yes. The M214.379 is manufactured from hardened stainless steel, offering enhanced corrosion resistance for typical workshop conditions. What is the purpose of the integrated stop? The integrated stop on the M214.379 provides repeatable positioning for fixtures and workpieces, enabling consistent alignment and faster setup during production or inspection. How is the product supplied for transport and storage? The angle square is delivered in a cardboard box to protect the tool during transport; this packaging helps prevent damage to the hardened faces before first use. Can this square be used for both layout and machine setup? Absolutely. The combination of stable construction and DIN 875/2 conformity makes the M214.379 suitable for layout work, machine setup, and routine inspection tasks in the workshop. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x230 mm Locksmith Square With Stop, Galvanised Special Steel Werksnorm - Metav IndustryLine
Take advantage of a galvanised, special‑steel construction combined with an integrated stop and workshop‑grade flatness for reliable layout work; order the square directly via Metav Werkzeuge or consult our technical team for application advice. Engineer's square M214.528 — 400 × 230 mm, galvanised stop (Metav IndustryLine) The Engineer's square M214.528 is a robust measuring square for general workshop layout and simple alignment tasks, combining a 400 × 230 mm face with a galvanised stop for repeatable positioning. Galvanised special-steel construction Integrated stop for repeatable positioning Precision-ground faces for accurate layout Compact 400×230 format for general use Accurate, workshop-ready geometry for reliable layout The 400 × 230 mm format delivers a practical balance between reach and stiffness, making this angle gauge ideal for everyday metalworking and maintenance tasks. The precision-ground faces ensure consistent squareness during marking and striking operations, reducing rework and setup time. Built from special steel with a galvanised finish, the instrument resists corrosion and keeps the measuring faces true even after heavy use, which supports steady production flow and fewer measurement interruptions. Durable construction that withstands daily handling A galvanised coating protects the square against shop contaminants while the robust core material provides stiffness where it matters: along the blade and stock junction. The integrated stop is designed for repeatable positioning, enabling quick, consistent transfers from fixture to fixture. This combination of durability and repeatability supports efficient processes in fabrication, assembly and quality‑control stations where tools must perform reliably under frequent handling. Practical features that save time during layout work A well‑designed workshop square reduces non‑value activities. The flat, ground faces and the stop allow rapid alignment and straightforward transfer of reference lines; fewer adjustments are needed before cutting or drilling. The weight of 1.1 kg gives a stable hand hold without being cumbersome, so single‑operator tasks remain manageable while maintaining accuracy. For shops seeking straightforward, measurable performance improvements, these tangible benefits translate into faster turnarounds and more consistent first‑pass quality. Trusted supply and application guidance for professional users Metav IndustryLine instruments are supplied with an emphasis on accessibility and reliability for industrial customers. The M214.528 sits within a product range curated to reduce supplier complexity and support repeatable workshop results. Technical guidance and clear specification data from the supplier in Emmerich help integrate the square into existing workflows, supporting confident purchasing decisions and long‑term dependability on the shop floor. For repeatable workshop measurements and reliable positioning, choose the Metav IndustryLine M214.528 — contact Metav Werkzeuge for technical consultation and supply from Emmerich on the Rhine. Technical data Article number: M214.528 GTIN: 4054469109060 Dimensions: 400 x 230 mm Weight: 1.1 kg Material: Special steel, galvanised Feature: with stop Standard: Werksnorm Tariff number: 90178090 Facts Width: 400 mm Height: 230 mm Weight: 1.1 kg Special features Galvanised finish Integrated stop for repeatable positioning Workshop measuring square FAQ What is the primary use of this measuring square? The M214.528 engineer's square is designed for layout, marking and simple alignment tasks in metalworking and general workshop environments. Is the square protected against corrosion? Yes — the Metav IndustryLine M214.528 has a galvanised finish on the special‑steel body to resist shop contaminants and extend service life. Does this model have a repeatable positioning feature? The integrated stop on the M214.528 enables repeatable positioning for consistent transfers and quicker setup between operations. What are the dimensions and weight of the square? The measuring square measures 400 × 230 mm and weighs 1.1 kg (SKU M214.528). Is this instrument suitable for precision inspection work? The square delivers workshop‑grade flatness and squareness for layout and assembly. For metrology lab‑level inspection, instruments with certified traceability and tighter tolerances should be considered. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x250x40 mm Granite Square 90° Grade 0, DIN 875/0 - Metav IndustryLine
Take advantage of a grade 0 reference that combines granite stability and precision-ground faces for reproducible squaring and inspection. Benefit from DIN 875/0 conformity and a compact 400 x 250 x 40 mm footprint to simplify setup and reduce machine downtime. Order the item directly via Metav Werkzeuge or consult the team for application advice. Granite square 90° M214.607 — grade 0 reference, 400 x 250 x 40 mm (Metav IndustryLine) A Granite square 90° M214.607 designed as a stable right-angle reference for workshop inspection and squaring of machine parts and spindles. Grade 0 accuracy to DIN 875/0 High-stability granite construction Precision ground reference faces Compact 400 x 250 x 40 mm footprint Reliable right-angle reference for inspection and setup The combination of grade 0 tolerance and a stone body creates a repeatable datum for squaring operations. Conforming to DIN 875/0 ensures the reference faces meet stringent flatness and perpendicularity requirements, which translates into measurable reductions in setup variation and inspection scatter. Where traceable alignment and reproducible positioning matter, this type of reference minimises rework and supports efficient quality control procedures. Why granite delivers metrology-grade stability Granite is the material of choice for dimensional references because of its superior thermal stability and natural vibration damping. Compared with metallic standards, a granite body changes dimensionally far less with temperature swings commonly found in workshops and inspection rooms; this yields steadier readings over time. The faces are precision-ground to provide a wear-resistant contact surface that preserves accuracy through repeated use and gentle handling. Practical benefits for the workshop and inspection lab A compact footprint of 400 x 250 x 40 mm balances reach with manoeuvrability: large enough to support many workpieces yet small enough for routine handling and storage. The unit serves as a fixed right-angle reference during spindle squaring, component inspection and set-up verification. Robust construction and ground faces make it suitable for regular use on the shop floor and in metrology stations where clear, stable references speed throughput and increase confidence in measurement results. For precision squaring in production or the metrology lab, request the Metav IndustryLine granite square M214.607 from Metav Werkzeuge — contact our Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical data Article number: M214.607 GTIN: 4054469109435 Material: Granite Dimensions: 400 x 250 x 40 mm Standard: DIN 875/0 ECLASS: 21170119 Tariff number: 68022300 Facts Footprint: 400 x 250 x 40 mm Grade: 0 SKU: M214.607 Special features Precision-ground reference faces High-stability granite construction Category: Angle / Square Intended use: Squaring, inspection, setup verification FAQ What accuracy and standard does the square meet? The granite square meets DIN 875/0 and is supplied as a grade 0 right-angle reference, ensuring high-flatness and perpendicularity suitable for demanding inspection tasks. Which material is used for the reference body? The body is made from granite, chosen for its thermal stability and vibration-damping properties that support consistent measurements. What are the external dimensions of the reference? The reference measures 400 x 250 x 40 mm, providing a compact yet practical footprint for workshop and lab use. Is the product suitable for squaring machine spindles and components? Yes — the design and precision-ground faces make the square appropriate for aligning and checking spindles, housings and machined parts. How is repeatability supported in routine use? Repeatability is achieved through the combination of a stable granite body, precision-ground faces and compliance with DIN 875/0, which together reduce variability during setup and inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x265 mm Inspection Square Flat, Hardened Stainless Steel, DIN 875/1, Cardboard Box - Metav IndustryLine
Combining DIN-compliant accuracy with a hardened stainless-steel construction, this inspection square gives repeatable 90° checks for shop-floor and quality-control routines. The flat profile and protective cardboard packaging reduce handling marks and support reliable storage; order the inspection square directly via Metav Werkzeuge or consult our advisors for application guidance. Inspection square M214.329 — 400 x 265 mm, hardened stainless steel, DIN 875/1 (Metav IndustryLine) The Inspection square M214.329 is a hardened stainless-steel angle gauge designed for precise right-angle verification in workshops and inspection benches according to DIN 875/1 Hardened stainless-steel construction Certified to DIN 875/1 Flat profile for stable contact Supplied in protective cardboard box Consistent right-angle control for quality assurance The hardened stainless-steel blade and body, manufactured to DIN 875/1, provide a stable reference that resists wear and deformation under regular use. This results in consistent accuracy across repeated checks, which is essential when verifying jig alignments, machine set-ups or assembly fixtures. The 400 x 265 mm size balances reach and rigidity, making it suitable for medium-format components where a true 90° reference is required. By keeping mechanical tolerances tight, inspection processes become faster and less dependent on corrective rework. Robust construction that stands up to the workshop A flat profile and hardened finish ensure secure seating against measured surfaces and minimise rocking that can introduce error. The corrosion-resistant stainless-steel construction helps maintain surface integrity in mixed workshop environments and reduces maintenance cycles compared with untreated steels. At roughly 2.5 kg, the unit is heavy enough to sit stably during checks yet light enough for convenient handling, so inspection routines remain efficient without compromising repeatability. Practical packaging and inventory readiness Delivered in a protective cardboard box, the square arrives ready for immediate integration into inspection kits or storage racks with minimal risk of transit damage. The clear size marking and GTIN facilitate inventory management and traceability for production control. As a Metav IndustryLine item, the tool is part of a broad precision range that supports streamlined procurement and predictable supply — useful for workshops consolidating suppliers to reduce administrative overhead. Choose Metav IndustryLine quality for dependable angle inspection; contact Metav Werkzeuge for delivery and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M214.329 GTIN: 4054469108148 Manufacturer: Metav IndustryLine Facts Size: 400 x 265 mm Weight: 2.5 kg Tariff number: 90178090 eClass: 21170119 Special features Material: hardened stainless steel Standard: DIN 875/1 Flat profile for stable contact Supplied in cardboard box FAQ What is the primary use of this inspection square? The inspection square M214.329 is intended for right-angle checks and alignment verification in workshop and inspection settings in accordance with DIN 875/1. Is the square suitable for routine shop-floor use? Yes; the hardened stainless-steel construction and flat profile make the M214.329 robust enough for regular shop-floor inspections and fixture checks. Does the tool resist corrosion and wear? The product is made from hardened, corrosion-resistant stainless steel, which reduces surface degradation during normal workshop use. What sizes and reach does the square provide? The tool offers a 400 x 265 mm blade and body combination, providing a balance of reach and rigidity for medium-format components. How is the square delivered and how should it be stored? The inspection square is supplied in a protective cardboard box suitable for transport and short-term storage; long-term storage in a dry, clean environment is recommended to preserve surface condition. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x265 mm Stop Angle, Hardened Stainless Steel, DIN 875/1, With Stop In Cardboard Box - Metav IndustryLine
Take advantage of a hardened stainless construction and DIN 875/1 accuracy to ensure repeatable squaring for production and inspection tasks; the integral stop and robust dimensions reduce setup time and increase throughput. Order the unit directly via Metav Werkzeuge or consult our specialists for application advice. Precision stop square M214.339 — 400 x 265 mm, hardened stainless (Metav IndustryLine) Precision stop square M214.339 for accurate squaring and alignment in machine shops and quality control 400 x 265 mm precision square, stainless Hardened construction for long-term stability Conforms to DIN 875/1 for verified squareness Accurate alignment for consistent production The 400 x 265 mm face area provides a stable reference for repetitive positioning and component squaring, making it suitable for both set-up and inspection work. Manufactured from hardened stainless steel, the instrument resists corrosion and maintains its geometry under workshop conditions; this stability reduces rework and supports predictable cycle times. Conformance with DIN 875/1 guarantees a defined tolerance band for squareness, allowing measurement and assembly processes to rely on a certified reference. Robust design that speeds workflow An integral stop simplifies fixturing and shortens the time required to clamp or position parts, which enhances throughput in medium-sized production cells. The compact yet rigid layout balances weight and stiffness for handable operation while preserving the flatness and perpendicularity required for precision tasks. Supplied in a practical cardboard box, the unit is ready for immediate integration into tool cupboards or transport between benches without elaborate packaging. Practical applications and workshop benefits The item is suited to tasks such as layout work, machine set-up, fixture inspection and component squaring where a repeatable right angle is required. Using a verified angle reference reduces inspection variation and supports quality control routines, helping to stabilise process capability indices. Sourcing this precision tool through Metav IndustryLine ensures steady availability and complements a wider toolkit of metrology solutions, providing a pragmatic route to tighter tolerances on the shop floor. For reliable squaring and durable workshop performance, contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich Technical data Article number: M214.339 GTIN: 4054469108230 Category: Angle / square Weight: 2.5 kg Dimensions: 400 x 265 mm Material: hardened stainless steel Standard: DIN 875/1 Packaging: cardboard box Tariff code: 90178090 Facts Dimensions (mm): 400 x 265 Mass (kg): 2.5 GTIN: 4054469108230 Tariff number: 90178090 Special features Hardened stainless steel construction Conforms to DIN 875/1 tolerance class Integral stop for repeatable positioning Supplied in cardboard box Suitable for machine set-up and inspection FAQ What level of squareness tolerance does this tool offer? The precision stop square M214.339 meets the squareness criteria of DIN 875/1, providing a standardised tolerance suitable for workshop inspection and alignment tasks. Is the material resistant to corrosion and workshop wear? Yes, the unit is made from hardened stainless steel which delivers corrosion resistance and maintains geometry under normal workshop conditions. How should the square be stored between uses? Store the square in its cardboard box or on a flat, dry surface to avoid knocks; the hardened surfaces reduce maintenance but mechanical protection during storage helps ensure long service life. Can the integral stop be used for fixture set-up on a machine table? The integrated stop is designed for repeatable positioning and aids fast fixturing on machine tables and assembly jigs, improving set-up efficiency. Is this product suitable for quality control inspections? The M214.339 precision stop square is appropriate for routine inspection and layout work, offering a defined reference angle in conformance with DIN 875/1 standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x265 mm Stop Square With Stop, DIN 875/1, Mild Steel - Metav IndustryLine
Benefit from a combination of precision to DIN 875/1, a robust carbon steel construction and large measuring faces that ensure stable, repeatable right‑angle set‑ups. Order the item directly via Metav Werkzeuge or consult the technical team for application advice. Squaring stop 400 x 265 mm — precision square, DIN 875/1 (Metav IndustryLine) A Squaring stop 400 x 265 mm designed for reliable right‑angle referencing and set‑up work on machine benches and inspection tables. Precision to DIN 875/1 Robust carbon steel construction Large 400 x 265 mm measuring faces Stable 3.2 kg mass for repeatable set-ups Dependable precision for workshop set‑up and inspection The square is manufactured to DIN 875/1, providing a defined accuracy class that supports consistent alignment and inspection tasks. Thanks to the 400 x 265 mm measuring faces, the gauge offers a balance between reach and rigidity, making it suitable for squaring castings, fixtures and assembled units. The standardised tolerance class simplifies quality documentation and helps maintain process reliability across repetitive operations. Stability and material benefits that reduce rework Constructed from carbon steel, the device delivers the mass and stiffness required for stable contact during marking and checking operations; the 3.2 kg mass dampens vibration and helps hold position on a bench. The robust material choice combined with the included stop reduces the need for temporary clamping and shortens set‑up time, improving throughput in small to medium batch production. The unit’s finish resists routine workshop wear and supports long service life under normal handling. Easy integration into routine workflows and simple care The design supports common workshop procedures: right‑angle referencing, alignment against machine tables and fixture validation. The plain‑steel construction is straightforward to maintain — light oiling and clean storage prevent corrosion and preserve accuracy. For inventory and procurement, the item is listed under the Metav IndustryLine range and integrates readily into inspection kits or dedicated set‑up stations, helping maintain a consistent quality standard across shifts. Contact Metav Werkzeuge to discuss suitability for specific applications or to request delivery from Emmerich for rapid supply and local stock verification. Technical Data Article number: M214.359 GTIN: 4054469108391 Manufacturer: Metav IndustryLine Facts Dimensions: 400 x 265 mm Weight: 3.2 kg Tariff number: 90178090 Special features Material: Normalstahl (carbon steel) Standard: DIN 875/1 Feature: with stop FAQ What tolerance class applies to this square? The squaring device is manufactured to DIN 875/1, which defines the precision class used for consistent right‑angle checks and workshop set‑ups. Is the material suitable for heavy workshop use? Yes; the Squaring stop 400 x 265 mm is made from carbon steel (Normalstahl), chosen for its stiffness and durability under routine handling. What applications are typical for this type of square? Typical uses include fixture and component squaring, alignment on machine benches, and comparative checks during assembly and inspection processes. How should the square be maintained to preserve accuracy? Wipe clean after use, apply a light protective oil film to prevent corrosion, and store on a flat, dry surface away from impacts to maintain long‑term accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400x400x50 mm Granite 90° Square Angle Plate, Four-Sided Ground, DIN 876/0 Surface, DIN 875/0 Accuracy - Metav IndustryLine
Take advantage of the combination of Grade 0 accuracy, corrosion‑resistant granite construction and DIN‑specified surfaces for reproducible squaring and inspection work; order directly via Metav Werkzeuge or consult our specialists for application guidance. Granite 90° Angle Plate 400 x 400 x 50 mm, Grade 0 — Metav IndustryLine A Granite 90° angle plate 400 x 400 x 50 mm designed as a stable squaring reference for inspection benches, toolrooms and precision set‑ups Machined and ground on four sides Corrosion- and acid-resistant granite Surface per DIN 876/0; squareness DIN 875/0 Grade 0 accuracy for metrology Reliable reference geometry that reduces rework A solid squaring reference in granite provides a dimensionally stable base that minimises thermal distortion and vibration influence during inspection. The sizeable 400 x 400 x 50 mm footprint combines reach with rigidity, allowing repeatable positioning of workpieces while preserving the reference angle. The declared Grade 0 tolerance indicates suitability for laboratory‑grade inspection tasks where consistent right‑angle references shorten setup times and reduce downstream rework. The machined and ground faces create a predictable contact condition that benefits both manual checks and optical alignment procedures. Measurable standards for traceable results Compliance with DIN 876/0 for the surface and DIN 875/0 for squareness offers an objective basis for quality documentation and process control. These standards define the flatness and angular limits that are expected for a metrological angle standard, enabling integration into existing quality systems and inspection plans. The granite construction keeps noise in measurement low and supports stable readings on dial gauges, test indicators or digital probes. Where traceability is required, the combination of material and norm conformity supports reproducible measurement chains. Easy handling in workshop and inspection workflows The square format and moderate thickness make the unit convenient to position on tables or in inspection fixtures while remaining sufficiently heavy for stable contact: the mass dampens small disturbances during measuring. The block’s machined faces supply consistent seating for measuring fixtures and clamps, improving the reliability of comparative checks. When used as a reference for squareness checks or for setting machine zeroes, the component speeds up routine tasks and helps maintain throughput in production measurement loops. Long service life with low maintenance needs Granite selected for metrological use resists corrosion and many chemical effects, giving the component a long operational life with minimal upkeep. Occasional cleaning with a lint‑free cloth and an appropriate solvent keeps the ground faces in specification; abrasive cleaning should be avoided to preserve the certified surface finish. Robust by design and requiring little calibration intervention, this angle plate is a practical investment for labs and workshops that demand stable geometric references over years of use. For precision squaring and documented inspection results, contact Metav Werkzeuge in Emmerich to discuss delivery and application details for the Metav IndustryLine granite angle plate; email info@metav-werkzeuge.com or call +49 2822 7131930 for specialist advice Technical Data Article number (SKU): M214.614 GTIN: 4054469183787 Manufacturer: Metav IndustryLine Facts Dimensions: 400 x 400 x 50 mm Weight: 24 kg ECLASS: 21170119 Special features Material: Granite, corrosion- and acid-resistant Machined and ground on four sides Surface: DIN 876/0 Squareness: DIN 875/0 Grade: 0 precision FAQ What level of squareness accuracy does the angle plate offer? The angle plate is specified as Grade 0, with squareness measured to DIN 875/0, providing a high‑precision 90° reference suitable for metrological inspection. Is the surface suitable for use with gauges and optical systems? Yes, the ground surface per DIN 876/0 gives a stable contact condition that is well suited to dial gauges, test indicators and optical alignment methods. How heavy is the unit and does it require special handling? The block weighs 24 kg; its mass contributes to measurement stability. Standard lifting with appropriate care is advised rather than mechanical fixtures for one‑person handling. Can the angle plate be used in corrosive environments? Constructed from corrosion‑ and acid‑resistant granite, the plate tolerates typical workshop environments better than many metallic alternatives; routine cleaning preserves the surface finish. Is this product suitable for laboratory and shop‑floor inspection? The combination of Grade 0 precision and DIN conformity makes it suitable for both laboratory calibration benches and demanding shop‑floor inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40x28 mm Cutmaker Precision Try Square Grade 00 DIN 875, Stainless Steel, Matt Chrome Finish - Metav IndustryLine
Take advantage of the combination of DIN 875/00 class 00 accuracy, corrosion‑resistant stainless steel construction and a compact 40×28 mm footprint for reliable right‑angle checks in fine metalworking; order the item directly via Metav Werkzeuge or consult the team for application advice. M214.011 Precision Square — DIN 875/00, 40×28 mm, stainless steel (Metav IndustryLine) The M214.011 Precision Square is a class 00 DIN 875 angle gauge designed for verification and marking tasks in toolmaking and fine mechanical workshops DIN 875/00 class 00 accuracy Stainless steel, matt chrome finish Compact 40×28 mm footprint Supplied in protective transport case Trusted squareness for precision tasks The instrument delivers repeatable right‑angle checks thanks to its compliance with DIN 875/00, which defines tolerances for small precision squares. In practical terms, the class 00 designation ensures tight angular control suitable for toolmaking and precision inspection tasks, reducing adjustment cycles and rework. The standardised tolerance gives a verifiable reference when aligning jigs, inspecting machined faces or setting up milling and drilling operations, so inspection results can be documented and traced with confidence. Compact format with workshop‑grade corrosion protection With a 40×28 mm blade and heel geometry, the square combines a small working area with a robust cross‑section: the short leg measures 6×3.5 mm and the long leg 5×3.5 mm, offering a stable contact surface that resists twisting during manual handling. Crafted from stainless steel with a matt chrome finish, the tool is rust‑resistant and suited to busy shop environments where coolant splash or humidity can otherwise impair accuracy. Delivery in a protective case safeguards the squareness during transport and storage, maintaining calibration between uses. Practical benefits at the bench and in the inspection bay The square is optimised for marking, visual inspection and setup work where a compact, reliable reference is required. Its small size makes it easy to manoeuvre into confined fixtures and between clamping elements, while the hardened, ground faces provide a stable datum for scribing and comparison. For workshops seeking a consistent reference instrument, the compact precision square offers a simple, low‑maintenance solution that integrates seamlessly into quality routines and inspection protocols. For workshop supply and expert advice on the M214.011 Precision Square from Metav IndustryLine, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com or call +49 2822 7131930 to arrange supply and technical consultation. Technical data Article number: M214.011 GTIN: 4054469106052 eClass: 21170119 Tariff number: 90178090 Standard: DIN 875/00 Dimensions & core data Size: 40 × 28 mm Short leg section: 6 × 3.5 mm Long leg section: 5 × 3.5 mm SKU: M214.011 Materials & special features Material: stainless steel, matt chrome finish Corrosion protection: rustproof Delivery: supplied in a plastic or wooden case for transport Category: Angle / square Intended use: precision angle verification and marking in fine metalwork and toolmaking FAQ What accuracy does the square offer? The square meets DIN 875/00 tolerances for class 00, providing the tight angular control expected for small precision squares used in toolmaking. Is the instrument suitable for use near coolant or humid environments? Yes, the stainless steel construction with a matt chrome finish gives corrosion resistance, and the item is supplied in a protective case to preserve its condition. Can this square be used for fixture alignment and marking operations? The compact dimensions and stable leg sections make the square well suited to marking, fixture alignment and visual inspection tasks in workshops. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40x28mm Cutter Square DIN 875/00 With 8x3.5 / 5x3.5mm Cross-Section - TECWERK
Take advantage of the combination of DIN 875/00 conformity, compact leg dimensions and a clearly defined cross-section to secure reliable squaring and marking in the workshop; order the precision square directly via Metav Werkzeuge or ask our consultants if needed. PREISSER Schnittmacherwinkel DIN875/00 – Precision Machinist's Square, 40×28 mm PREISSER Schnittmacherwinkel DIN875/00 is a compact precision square for marking, checking and aligning parts in the workshop and for inspection tasks DIN 875/00 high precision standard Compact legs 40×28 mm Cross-section 8×3.5 / 5×3.5 mm Single-piece workshop format Accurate alignment with an industrial standard The square is manufactured to the DIN 875/00 tolerance class, which guarantees a high level of precision for squareness checks and layout tasks. As a reference tool, the item provides a straight, stable face that can be used to verify edges and set up fixtures; measurement deviation is minimised by the strict standard. For technicians and quality staff, conformity to DIN ensures comparability with inspection routines and integration into established calibration cycles. The robust geometry supports repeatable results when checking machine set-up or verifying finished components. Compact geometry for tight working spaces A compact leg design with 40×28 mm dimensions and a defined cross-section of 8×3.5 / 5×3.5 mm allows the tool to be used where larger squares would be impractical. The smaller leg depth aids access to narrow slots and assemblies while the stepped cross-section increases stiffness where it matters. This form factor is particularly useful in maintenance, small-batch fabrication and precision assembly, where reliable reference edges are required but available clearance is limited. The concise footprint supports quick positioning and secure contact against workpieces. Simple handling and clear workshop benefits Engineered for routine use, the square delivers a straightforward reference without unnecessary complexity. The compact format and precision tolerance simplify inspection protocols, reducing set-up time and the need for repeated measurements. Packaged as a single item for immediate deployment, the tool integrates into existing tool sets and quality kits. If further technical information or compatibility details are required, technical staff can request additional data via email or phone at info@metav-werkzeuge.com / +49 2822 7131930 — assistance is available to support selection and application. Contact Metav Werkzeuge today for personalised technical guidance on selecting the right precision square for the workshop and arranging supply through our specialists at Metav Werkzeuge Technical Data Article number: 4000858404NW UID: 4000858404NW Label: Schnittmacherwinkel DIN875/00 Schenkel-L.40x28mm PREISSER Product type: Schnittmacherwinkel Manufacturer (hersteller): TECWERK Packaging unit: 1 Dimensions & measurable data Legs (L × W): 40 × 28 mm Cross-section: 8 × 3.5 mm / 5 × 3.5 mm Standards & features Standard: DIN 875/00 Brand: PREISSER FAQ What does DIN 875/00 mean for accuracy? DIN 875/00 denotes the high-precision tolerance class applied to the PREISSER machinist's square; it indicates the tool was produced to strict squareness tolerances for reliable inspection work. Is the square suitable for workshop layout and marking? Yes, the PREISSER Schnittmacherwinkel is intended for marking, layout and squareness checks in workshop environments thanks to its compact legs and defined cross-section. How does the cross-section affect stability? The specified cross-section (8×3.5 / 5×3.5 mm) provides an engineered balance between rigidity and accessibility, ensuring stable contact and dependable reference edges during inspection. Can the tool be stored with other precision instruments? The single-piece format and compact dimensions make the square straightforward to integrate into a precision tool kit or storage drawer without risking interference with other instruments. Which part number identifies this item for reordering? Reorder using article number 4000858404NW, which identifies the PREISSER Schnittmacherwinkel DIN875/00 in stock lists and procurement systems. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
43cm Angle Gauge Winkelfix Mini 0-180° Range - NEDO GmbH & Co. KG
Take advantage of a compact, workshop-ready solution that combines a full semicircle 0–180° measuring range with a 43 cm leg reach for reliable alignment tasks; the robust mini format keeps setup time low and improves process efficiency. Order the Winkelmessgerät directly via Metav Werkzeuge or contact our consultants for application advice. Winkelfix mini angle gauge (0–180°), 43 cm arms — NEDO The Winkelfix mini is a compact angle measuring device designed for precise alignment and rapid angle checks in workshops and on-site installations across a full 0–180° range. Wide 0–180° measuring range 43 cm leg length for extended reach Compact mini format for confined spaces Faster, more reliable angle alignment for production work The 0–180° measuring capability delivers full semicircle coverage, which simplifies the verification of mitres, set-ups and machine alignments. As an angle gauge, this tool reduces the need for multiple jigs by enabling direct angular checks across a wide span; the result is fewer setup iterations and a measurable gain in productivity. The clear mechanical concept of the device supports repeatable adjustments, so small errors in fixture alignment are identified earlier and corrected before they affect downstream operations. Compact form with practical reach for tight installations The mini execution pairs portability with a 43 cm arm length, allowing access into restricted areas without compromising stability. This balance of compactness and reach makes the instrument suitable for bench work as well as site tasks where larger devices are impractical. The space-saving format also eases storage and transport between workstations, supporting a lean workshop layout and quicker job changes. Fewer tools carried between locations mean less downtime and clearer organisation on the shop floor. Simple application and clear benefits for everyday tasks Designed as a pragmatic measurement aid, the gauge streamlines routine checks and quick inspections. For carpentry, metal fabrication and installation work, the device provides an immediate reference for angular conformity, speeding up decision-making during assembly and reducing rework. The straightforward mechanical design keeps training effort low and allows technicians to focus on the task rather than on complex measurement procedures. Where traceable calibration is required by process control, the gauge can be incorporated into regular inspection routines to maintain consistency. For professional angle measurement and compact handling, choose the NEDO Winkelfix mini — contact Metav Werkzeuge for purchasing and technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000857613NW SKU: 4000857613NW Product type: Angle measuring device Facts Measuring range: 0–180° Leg length: 43 cm Version: mini Special features Model: Winkelfix Brand: NEDO GmbH & Co. KG Packaging unit: 1 FAQ What angles can be measured with this device? The Winkelfix mini measures across a 0–180° range, enabling full semicircle checks for internal and external angle verification. Is the gauge suitable for site work and small workshops? Yes, the mini design and 43 cm arms make the angle gauge well suited to both workshop benches and on-site tasks where space is limited. Can the Winkelfix mini be used for both metal and wood applications? The Winkelmessgerät is intended for general angle verification and is commonly used in metalworking and carpentry for rapid alignment checks. What makes the Winkelfix mini practical for repetitive checks? The straightforward mechanical concept of the gauge supports quick, repeatable measurements, reducing setup time and the risk of cumulative alignment errors. Which SKU should be referenced when ordering or requesting information? Please refer to SKU 4000857613NW when enquiring about the Winkelfix mini angle measuring device. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ensure right angles every time with precision angle gauges
Angle measurement is decisive in metalworking, where even the smallest deviation from a 90° geometry can cause assembly errors or functional faults. The category covers both fixed verification tools and variable measuring instruments, presented here as angle gauges, with common synonyms control squares and sine bars used throughout.
Where and how these tools make the difference on the shop floor
For basic layout and rough alignment, the engineer’s square (a simple flat or bench square) serves as the workshop baseline; it is useful for marking and quick checks but not intended for precision components. When higher accuracy is required, control squares with hardened and lapped faces are used; they are produced in accuracy classes referenced by DIN 875 and designed for the light gap method, which reveals form errors by inspecting the gap between gauge and workpiece under illumination. In pipeline and vessel fabrication, the flange square provides a robust contact geometry to align flanged faces to pipe axes and to withstand high mechanical loading. For angles other than 90°, a sine bar enables trigonometrical determination by using end measures, achieving resolutions into the seconds of arc when set up correctly. Regular calibration and checks for wear and flatness of the legs are essential, since a rounded or damaged leg will distort results.
Practical advantages that reduce rework and speed production
- Reduced fitting errors through repeatable reference geometry using control squares.
- Clear detection of form errors with the light gap method (fast visual indication).
- Durable contact surfaces thanks to hardened and lapped faces, extending service life.
- Accurate non-90° measurement via sine bar setups, enabling fine angular adjustments.
- Stable alignment of flanged components with purpose-built flange squares, lowering assembly time.
Why Metav is the reliable partner for precision angle measurement
Metav stands for democratisation of precision. As an experienced precision partner, Metav combines decades of know-how with a comprehensive range for industry, craft and trade; over 48,000 customers trust this quality filter based in Emmerich. With a broad assortment and consistent supply, Metav simplifies procurement and ensures a dependable source for angle gauges, calibration accessories and workshop standards.
Quick summary
Accurate angle gauges — from basic engineer’s squares to high-precision control squares and sine bars — prevent costly fit problems and support reliable, repeatable manufacture. Choose tools matched to the required accuracy class and maintain them regularly to keep measurement integrity.
FAQ
What is the difference between an engineer’s square and a control square?
An engineer’s square is a workshop baseline for marking and rough checks, while a control square features hardened and lapped faces and is manufactured to tighter tolerances (per DIN 875) for inspection and detection of form errors.
How does the light gap method work for checking right angles?
The light gap method places the workpiece against a control square; uneven gaps visible under a light source indicate deviations from perpendicularity, providing an immediate visual assessment of form errors.
When should I use a sine bar instead of a fixed angle gauge?
Use a sine bar when you need precise angles other than 90°. By stacking end measures you set the desired angle trigonometrically, achieving much finer resolution than most fixed gauges allow.
How often should angle gauges be checked for wear?
Regular inspection of flatness and leg condition is mandatory; any rounding or damage to the legs can significantly falsify measurements, so schedule checks according to usage intensity and your quality control procedures.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com