Precision angle gauges for reliable right-angle control
Angle gauges and inspection squares provide dependable verification of right-angle geometry and ensure accurate alignment in metalworking assemblies. Used for tasks ranging from rough marking with a machinist's square to high-precision verification with hardened and lapped control angles, these tools prevent fitment errors and functional faults by detecting even minute deviations from 90° and other set angles. For heavy-duty applications such as flange alignment in piping and vessel fabrication, robust flange squares offer stable seating on curved surfaces, while sine bars and adjustable angle gauges enable trigonometrically exact measurements for non‑standard angles. Regular calibration and inspection of leg flatness and wear are essential to maintain measurement integrity.
450mm Electronic Angle Finder 0–270° Range 45cm Blade Length, 3-in-1 IP54 - STABILA
Benefit from the combination of a broad measuring range and long, stable legs for fast, reliable angle measurement on the shop floor. The integrated 3-in-1 functionality reduces tool changes and improves workflow; order the instrument directly via Metav Werkzeuge or request guidance from our consultants if further technical details are required. STABILA TECH 700 DA Electronic angle gauge — 0–270° range, 45 cm legs A TECH 700 DA electronic angle gauge designed for versatile angle measurement across a wide sector, with long legs for stable setups in workshop and site applications 0–270° wide measuring range 45 cm robust aluminium legs 3-in-1 functionality: level, angle, inclinometer Measure wide angles without repeated repositioning The large 0–270° measuring capability of this electronic angle gauge significantly reduces the need to reconfigure the setup when working on complex geometries. With a single device covering more than three quarters of a circle, process steps are simplified and cycle times are shortened. The electronic measurement principle provides a clear numerical readout that supports reproducible results, which is particularly valuable when multiple components must meet the same angular specification. Fewer transfers between tools mean fewer alignment errors and a smoother production flow. Stable leg length for repeatable setups and safer handling Longer legs are more than convenience: 45 cm legs offer increased contact area and improved leverage when aligning profiles or fixtures, resulting in enhanced stability during measurement. The extended reach also allows secure clamping or support on larger workpieces without auxiliary fixtures, reducing the chance of slipping or misalignment. This stability translates into better repeatability across successive measurements, helping maintain consistent quality when checking assemblies or setting up machine tools. Integrated functions cut down on tool changes and handling time The 3-in-1 execution combines multiple measurement modes in a single instrument, saving time otherwise spent swapping devices. By merging level, angle and inclinometer capabilities, the unit supports a flexible workflow for metalworking, joinery and installation tasks. The compact multi-function design keeps the toolset lean and reduces handling time, yielding tangible efficiency gains in repetitive tasks and reducing the logistical overhead of carrying separate instruments for each function. Robust design for workshop conditions and practical use Built for everyday use, the instrument balances usability with durable construction, reflecting the STABILA commitment to practical metrology tools. The electronic operation streamlines reading and recording of values, while the physical geometry of the legs provides a reliable reference against bars and edges. For operators who require clear, actionable measurements without complex calibration procedures, this device offers a pragmatic route to precise angular checks and everyday alignment tasks. Contact Metav Werkzeuge today to discuss the suitability of the STABILA TECH 700 DA for specific applications or to arrange purchase and fast dispatch from our Emmerich stock. Technical Data Article number: 4000857166NW Model: TECH 700 DA Product type: Electronic angle gauge Execution: 3in1 Label: Elektronikwinkelmesser TECH 700 DA Messber.0-270Grad Schenkel-L.45cm UID: 4000857166NW Facts Measuring range: 0–270° Leg length: 45 cm Packaging unit: 1 Special features 3-in-1 functionality Electronic measurement Long legs for stable setups FAQ What angles can be measured with this instrument? The device measures from 0–270°, offering a wide sector for alignment and angle checks without frequent repositioning. Is the TECH 700 DA suitable for on-site and workshop use? Yes, the TECH 700 DA is an electronic angle gauge designed for both workshop conditions and on-site tasks where robust legs and electronic readout aid reliable measurement. What does 3-in-1 execution mean in practice? The 3-in-1 execution combines level, angle and inclinometer functions in a single instrument, reducing the need for multiple tools and speeding up measurement workflows. How does leg length affect measurement quality? Longer legs (45 cm) improve contact and leverage, increasing stability and repeatability when setting up the instrument against large or uneven workpieces. Can this instrument help reduce setup times in production? By covering a broad measuring range and integrating multiple functions, the instrument reduces tool changes and repositioning, which helps shorten setup and inspection times. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45cm Angle Measure Winkeltronic 0.05° Resolution 0.1° Accuracy IP52? - BMI
Take advantage of the combination of precise 0–355° measurement range, high 0.05° resolution and a large backlit display for faster set-up and fewer reworks; order the instrument directly via Metav Werkzeuge or consult our specialists for tailored advice. Winkeltronic — digital angle gauge with 0–355° range and 0.05° resolution The Winkeltronic is a compact digital angle measuring instrument designed for precise angle measurement and transfer in workshops and on-site assembly, featuring long arms for stable positioning and integrated spirit levels for reliable alignment. Large backlit display for clear readings High resolution 0.05° and ±0.1° accuracy Symmetrical arms for effortless alignment Hold function and automatic shut-off Faster, more accurate angle measurement for production tasks The digital angle gauge delivers a measurable improvement in workflow where repeatable angular accuracy matters. With a measuring range of 0–355°, an effective 0.05° resolution and an accuracy of ±0.1°, the device reduces uncertainty when transferring angles from drawings to fixtures. The 45 cm arm length provides stable contact on workpieces, while the ability to set the display to zero in any arm position simplifies comparative measurements and angle subtraction; this means fewer manual calculations and less time spent on setup. Clear readout and practical functions that reduce errors A large, backlit display makes readings quick to interpret in varying light conditions, cutting reading errors on busy shop floors. The instrument includes a dedicated Hold function to freeze a measurement for recording, plus an automatic shut-off after three minutes to preserve battery life. Symmetrically arranged arms allow effortless seating against edges and profiles, while the integrated horizontal and vertical spirit levels assist in maintaining plumb during transfer tasks. Together, these features increase throughput by reducing alignment retries and measurement ambiguities. Built for workshop reliability and simple integration into measurement routines The design focuses on dependable daily use: robust arms for repeatable placement and clear status feedback from the display. Power can be supplied by 4 × 1.5 V AA cells or 4 × 1.2 V rechargeable batteries, offering flexibility for workshop environments that favour rechargeable workflows. Zeroing at any arm position and the concise measurement readout support rapid handover between setup and machining steps, helping teams keep production moving with fewer stoppages. For complex setups or verification tasks, the device integrates smoothly into standard inspection routines and reduces the administrative burden of repeated manual checks. Contact Metav Werkzeuge for personalised technical advice or to request purchase details for the Winkeltronic via Metav’s sales team. Technical Data Article number: 4000857638NW Product type: Digital angle gauge Model: Winkeltronic Packaging unit: 1 Facts Measuring range: 0–355° Resolution: 0.05° Accuracy: ±0.1° Arm length: 45 cm Power supply: 4 × 1.5 V AA or 4 × 1.2 V rechargeable Automatic shut-off: 3 minutes Special features Large backlit display Hold function Zeroing in any arm position Symmetrical arm arrangement for easy positioning Integrated horizontal and vertical spirit levels UID: 4000857638NW FAQ What is the measuring range of the instrument? The instrument measures across a range of 0–355°, providing near-full rotation capability for most workshop tasks. What resolution and accuracy can be expected? Resolution is 0.05° and the instrument achieves an accuracy of ±0.1°, which supports fine angular adjustments and precise transfers. Can the device be zeroed at any arm position? Yes, zeroing in any arm position is possible, enabling comparative and relative measurements without repositioning the workpiece. What power options are supported? Power is provided by 4 × 1.5 V AA cells or 4 × 1.2 V rechargeable batteries, offering compatibility with common battery types. Does the display have a backlight and a hold function? The large backlit display aids visibility in low light and the Hold function freezes the current reading for documentation or transfer. Manufacturer / Responsible: Mahr GmbH Helios-Preisser Vertrieb; Ölbergstraße 19; 72501 Gammertingen; Germany; +49 7574 400-60
4x90° Miter Gauge Aluminium Black Anodised Direct Angle Reading - Metav IndustryLine
Take advantage of precise 4×90° alignment, robust black anodised aluminium construction and immediate direct angle reading for faster saw set-ups and consistent results. Order the miter angle gauge directly via Metav Werkzeuge or ask the consultants for advice. Miter Angle Gauge M214.158 — 4×90°, aluminium, black anodised Miter Angle Gauge M214.158 is a compact, workshop-grade tool for angle measurement and quick alignment of chop and miter saws. Precision 4×90° alignment Direct angle reading for fast setup Black anodised aluminium construction Lightweight 0.1 kg for easy handling Faster, repeatable 90° set-ups for production and workshop use The solid aluminium body with black anodised finish gives a stable reference that resists wear and glare, enabling consistent positioning when cutting or checking assemblies. The instrument provides four 90° faces which simplify multi-directional alignment tasks; this reduces repositioning time and minimises rework. Thanks to the direct angle reading feature, the current angle or mitre can be read immediately without additional conversion or auxiliary gauges, supporting efficient cycle times in small-batch production and daily workshop routines. Use of a light, rigid material keeps the tool easy to manoeuvre while maintaining dimensional stability under normal handling. Designed for practical workshop handling and rapid adjustment A weight of approximately 0.1 kg and compact dimensions make the unit easy to hold against fences and saw tables while making quick adjustments. The construction balances low mass with sufficient stiffness so that readings remain reliable during one-handed operation. The clear graduation (scale) supports rapid visual checks and alignment procedures commonly required when setting up miter saws or jigs. The gauge is particularly useful where repeated 90° checks are needed—on frames, skirting, trim or fixture assembly—cutting time spent on measurement and improving throughput without sacrificing accuracy. Clear technical behaviour and compatibility with common workflows Measurements are presented in a straightforward manner suitable for workshop staff and quality checks; the device is intended for practical alignment rather than laboratory metrology. The robust surface treatment improves resistance to light contact and chips, while the simple geometry means it integrates directly into standard jigging and clamping setups. As an industrial companion, this gauge complements stationary angle-measuring tools and digital inclinometers where rapid mechanical alignment is required before a final electronic check. Metav IndustryLine quality control ensures consistent batch characteristics and dependable repeatability in everyday use. For reliable 90° set-ups and dependable workshop performance, contact Metav Werkzeuge to discuss supply and integration of the Metav IndustryLine miter angle gauge (M214.158) and secure consistent alignment results for production and maintenance tasks. Technical Data Article number: M214.158 GTIN: 4054469183336 Brand: Metav IndustryLine Facts Material: Aluminium, black anodised Dimensions: 185 x 63 x 14 mm Weight: 0.1 kg Measurement range: 4×90° Scale graduation: 2° Special features Direct reading of measuring angle and miter angle Suitable for angle measurement and setting of chop and miter saws Compact, lightweight design for one-handed handling Category: Angle measuring devices FAQ How accurate is this gauge for setting saws to 90°? The Miter Angle Gauge M214.158 offers a robust mechanical reference for repeatable 90° set-ups; its design focuses on reliable workshop alignment rather than laboratory-grade micrometre accuracy. Can the gauge be used directly on mitre and chop saw fences? Yes, the aluminium construction and four 90° faces allow direct contact with fences and workpieces for quick angle checks and saw adjustments. Is the surface finish durable against shop use? The black anodised surface enhances wear and corrosion resistance, making the tool suitable for regular workshop handling. Does the tool require calibration before first use? The gauge is supplied as a mechanical reference; for traceable calibration requirements, consult Metav Werkzeuge about available verification options. Which applications benefit most from this gauge? Typical uses include setting up mitre and chop saws, checking corner squareness on assemblies, and quick alignment tasks in joinery, metalwork and general workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 x 40 mm Hair Square, Grade 00 DIN 875, Stainless Steel Flat Edges, Supplied in Case - Metav IndustryLine
Take advantage of compact dimensions and hardened measuring edges for reliable right‑angle checks in inspection and bench work; the robust stainless‑steel construction with matt chrome finish supports long service life and repeatable results. Order directly via Metav Werkzeuge or consult our specialists for delivery and technical guidance. Hairline square 50 x 40 mm — DIN 875/00, stainless steel (Metav IndustryLine) The Hairline square 50 x 40 mm is a compact precision angle gauge for workshop inspection and layout work, built for repeatable 90° checks on small components and assemblies. DIN 875/00 accuracy class 00 Stainless steel, matt chrome finish Hardened measuring edge for wear resistance Compact 50 x 40 mm format Precise angle control for inspection and layout The square is manufactured to DIN 875/00, class 00, which defines a high level of angle accuracy suitable for fine inspection tasks. This standardised tolerance ensures that angle checks performed with the tool can be relied on as part of incoming inspection or routine quality control. The hairline concept and finely finished edges produce a clear sightline for layout work, while the flat profile supports stable seating against reference surfaces. Emphasis on measurable conformity provides a rational basis for process decisions and reduces rework. Robust construction for long service life Constructed from stainless steel with a matt chrome finish and a hardened measuring edge, the tool is designed to withstand frequent use in busy workshops. The hardened edge resists wear, maintaining edge integrity and thus preserving the calibrated geometry over time. The matt chrome surface reduces glare under workshop lighting, aiding visual alignment during marking and inspection. Compact form factor and low mass make the instrument easy to manoeuvre on benches and fixtures without sacrificing stiffness. Practical handling and application benefits The compact 50 x 40 mm footprint supports access to confined spaces where larger squares cannot be used, making the tool well suited to component work, jig checks and small‑assembly verification. The hairline measuring edge enables precise visual alignment with drawn or machined lines, and the flat design offers a stable contact area for right‑angle verification. Delivered in a protective case for transport, the instrument is kept safe in transit and during storage, which contributes to long‑term measurement reliability and consistent results across production runs. Proven supply and workshop support As part of the Metav IndustryLine range, the tool benefits from Metav’s European distribution and quality screening; stock is held centrally in Emmerich to support dependable delivery. The combination of industry standard conformity and robust finishing supports efficient inspection workflows and lowers the operational risk of undetected angular errors. For procurement decisions, the documented standard and material specifications offer a sound, evidence‑based argument for selection in both small workshops and production environments. Contact Metav Werkzeuge in Emmerich for technical clarification or to request delivery information and suitability advice for metrology applications Technical Data Article number: M214.002 GTIN: 4054469105963 Norm: DIN 875/00 Facts Dimensions: 50 x 40 mm eClass: 21170127 Tariff number: 90178090 Special features Material: stainless steel, matt chrome with hardened measuring edge Accuracy: DIN 875/00, class 00 Design: flat profile with hairline measuring edge Delivery: protective case for transport FAQ What does DIN 875/00 class 00 mean for measurement tasks? DIN 875/00 class 00 defines a high tolerance for right‑angle accuracy; the hairline square supplied meets that standard for reliable inspection and layout use. Is the hairline square suitable for shopfloor and laboratory use? Yes, the hairline square is suitable for both workshop inspection and precision bench work thanks to its hardened edge and matt chrome finish. What materials is the tool made from and how does that affect durability? The tool is made from stainless steel with a matt chrome finish and a hardened measuring edge, which together increase corrosion resistance and wear performance. Does the delivery include protective packaging? The hairline square is delivered in a protective case for transport to safeguard the measuring edges during shipment and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500 x 250mm Angle Plate 40 x 8mm Without Stop, Precision Ground - TECWERK
Take advantage of the combination of DIN 875/II conformity, a robust 40 x 8 mm cross-section and long 500 x 250 mm legs to ensure stable, repeatable 90° checks on larger components; order directly via Metav Werkzeuge or consult our specialists for procurement guidance. Precision engineer's square DIN 875/II – 500 x 250 mm (no stop) – TECWERK Precision engineer's square DIN 875/II – 500 x 250 mm (no stop) for accurate 90° layout and inspection in metalworking and workshop metrology DIN 875/II precision standard Legs 500 x 250 mm Solid steel construction 40 x 8 mm cross-section Without stop for flexible use Consistent accuracy where it matters Conformity to DIN 875/II defines the manufacturing tolerances and ensures the square delivers a reliable right angle for routine inspection and layout. The precision geometry reduces uncertainty in repeat measurements, which supports faster decision-making on the shop floor and fewer rework cycles. Built to give a stable datum, the tool is suitable for alignment and control tasks in everyday workshop metrology. Robust construction for dependable stability The combination of long legs and a substantial 40 x 8 mm cross-section gives the instrument the rigidity required for larger workpieces while maintaining a slim profile for ease of handling. The steel construction resists flex under typical bench and machine-table use, so readings remain consistent over time. This structural quality translates directly into fewer measurement errors and improved workflow reliability. Flexible handling and application range With 500 x 250 mm legs and an execution without stop, the angle is prepared for varied positioning and can be used on flat surfaces or against irregular fixturing where a fixed stop would limit reach. The absence of an integrated stop increases adaptability for layout, marking-out and visual inspection tasks, making the tool a versatile companion in production and maintenance settings. Procurement confidence and local support Sourcing through Metav Werkzeuge pairs the instrument with an experienced precision partner anchored in Emmerich. Metav combines a broad product range with reliable supply chains and industry know-how, reducing procurement complexity. For buyers seeking a dependable angle for daily quality checks, the mix of standard conformity, robust design and local advisory support makes this square a practical choice. Contact Metav Werkzeuge for tailored purchasing advice and to discuss suitability for specific measurement tasks; procurement assistance is available from our Emmerich office and specialist consultants Technical data Article number: 2000858250NW Label: Winkel DIN 875/II Schenkel-L.500x250mm o.Anschlag TECWERK Manufacturer: TECWERK Dimensions & measurable data Legs: 500 x 250 mm Cross-section: 40 x 8 mm Packaging unit: 1 Special features Execution: without stop Standard: DIN 875/II FAQ What accuracy standard does this square comply with? The square complies with DIN 875/II, providing a recognised tolerance class for right-angle accuracy suitable for general workshop metrology and inspection tasks. Is the tool suitable for larger workpieces and layout tasks? Yes, with 500 x 250 mm legs and a rigid 40 x 8 mm cross-section the square is intended for larger layout and inspection tasks where stability and reach are required. Does the square include a stop or fixture for repetitive checks? This execution is supplied without stop, which increases flexibility for positioning but does not provide a factory-mounted repeating stop. Who supplies and supports procurement for this product? The item is offered via Metav Werkzeuge; procurement can be coordinated through their Emmerich office and specialist consultants who advise on selection and delivery. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
500 x 280mm Slip-Joint Engineer's Square 25 x 5mm Section, Without Stop - TECWERK
Combining a robust 25 x 5 mm cross-section with generous leg lengths of 500 x 280 mm, this square offers stable, repeatable right-angle checks for workshop fabrication. Order the tool directly via Metav Werkzeuge or contact our consultants for application advice. TECWERK Metalworker's Square – 500 x 280 mm, without stop The TECWERK metalworker's square is a large-format right-angle tool designed for layout and angle verification in metal fabrication and general workshop assembly, supplied in the version without a stop for unobstructed edge work. Heavy-duty 25 x 5 mm section Legs 500 x 280 mm for large components Flat, straight edges for precise marking No stop variant for unrestricted edge access Consistent squareness for reliable production The square's substantial 25 x 5 mm cross-section provides a rigid reference that resists bending and vibration during routine use, which improves repeatability in layout and inspection tasks. A solid, stable geometry reduces error accumulation when transferring edges or checking assemblies; this means fewer reworks and smoother production flow. The design supports fast visual control and stable contact across the measuring edge, translating technical stability into measurable time savings during batch work. Unobstructed layout and flexible edge use With the without stop configuration, the right-angle tool gives free access to the full edge length, enabling marking and measuring along the entire leg without interference from a lip or stop. This is particularly useful when working on large plates, frames or profiles where a fixed stop would prevent flush alignment. The open-edge layout therefore supports flexible workflow setups and simplifies transfers between marking, cutting and welding stages while maintaining the same reference plane. Practical handling for workshop environments Generous leg dimensions of 500 x 280 mm make the tool suitable for larger assemblies while the flat, straight edges facilitate accurate scribing and quick visual checks. The instrument's geometry concentrates functionality on two benefits: precise angle verification and straightforward handling. As a simple, mechanical solution it requires no calibration equipment to provide immediate, reliable orientation for fabrication, assembly and inspection operations. For dependable workshop squareness, choose the TECWERK metalworker's square via Metav Werkzeuge; for technical questions or application guidance please contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000858050NW Label: Schlosserwinkel Schenkel-L.500x280mm o.Anschlag TECWERK Product type: Schlosserwinkel Execution: ohne Anschlag Dimensions / Core data Leg lengths: 500 x 280 mm Cross-section: 25 x 5 mm Packing unit: 1 UID: 2000858050NW Special features Version: without stop Brand: TECWERK FAQ Is this square suitable for large metal sheets? The TECWERK metalworker's square, SKU 2000858050NW, with legs of 500 x 280 mm is designed to support layout and angle checks on larger components and metal sheets. What does 'without stop' mean for practical use? 'Without stop' indicates the square has no fixed lip, which allows unobstructed access to the full edge for marking and measuring, improving flexibility when using the square on wide workpieces. How does the 25 x 5 mm cross-section affect accuracy? A 25 x 5 mm cross-section increases rigidity and reduces deflection under contact, which helps the square maintain consistent right angles during repeated layout and inspection tasks. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
500 x 330 mm Inspection Square Flat, DIN 875/1, Carbon Steel - Metav IndustryLine
Take advantage of the combination of DIN 875/1 accuracy, a flat profile and a robust standard steel construction for reproducible angle checks and stable workshop measurement routines. Order the inspection square directly via Metav Werkzeuge or consult the Metav team for application advice. Inspection square M214.350 — 500 x 330 mm, DIN 875/1 (Metav IndustryLine) The Inspection square M214.350 is a flat, precision angle gauge designed for workshop inspection, machine set-up and quality control where reproducible right-angle references are required. Flat profile for stable contact Accuracy class DIN 875/1 Dimensions 500 x 330 mm Made from standard steel Precise right-angle checks that save time The DIN 875/1 classification guarantees a defined tolerance band for squareness, making this instrument suitable where clear acceptance criteria are required. With the 500 x 330 mm faces the square provides sufficient reach to check medium-sized components and fixtures while avoiding cumbersome handling. Using a certified accuracy class reduces rework and inspection time because measurements are directly comparable to common workshop standards. The flat geometry ensures consistent seating on mating faces, which improves repeatability during layout and setup operations. Robust build for repeatable measurements and easy handling Manufactured from standard steel, the square combines rigidity with manageable weight (approx. 3.1 kg) so it sits firmly on a workpiece without excessive effort to position. The flat profile minimises rocking and enables reliable contact across the full length of the blade. For everyday use in fabrication, assembly or inspection benches this results in fewer measurement corrections and a more efficient workflow. The design is maintenance-friendly and suited to the practical demands of industrial workshops. Integration into workshop processes and quality routines As a purpose-built angle gauge, the instrument supports tasks such as machine alignment, jig and fixture verification, and incoming inspection of right-angle components. The clear conformity to DIN 875/1 simplifies documentation in quality protocols and provides a solid basis for traceable acceptance statements. The Metav IndustryLine offering is positioned to bridge professional accuracy with workshop practicality, helping maintain throughput without compromising measurement confidence. For a tailored discussion on how the Metav IndustryLine inspection square M214.350 can be integrated into existing quality procedures, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical Data Article number: M214.350 GTIN: 4054469108322 Tariff number: 90178090 Facts Dimensions: 500 x 330 mm Weight: 3.1 kg Accuracy class: DIN 875/1 Special features Material: standard steel Flat profile Application: inspection of right angles, machine set-up, layout FAQ What accuracy level does the square provide? The inspection square M214.350 conforms to DIN 875/1, which defines the tolerance limits applicable for this accuracy class. Is the M214.350 suitable for machine alignment? Yes, the Metav IndustryLine inspection square M214.350 is designed for machine set-up and jig verification where a stable right‑angle reference is required. How heavy is the instrument for handling on the bench? The unit weighs approximately 3.1 kg, giving a stable feel that maintains contact without being unwieldy during routine inspections. What materials is the square manufactured from? The square is made from standard steel, providing the rigidity needed for reproducible measurements in workshop environments. Can the square be used for layout work as well as inspection? Yes, the flat profile and defined faces make the square suitable for both precise layout tasks and dimensional inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500 x 330mm Angle Plate 40 x 8mm Section Without Stop - TECWERK
Take advantage of precise angle control and robust construction combined with long leg lengths for reliable layout and inspection work — a pragmatic solution for production and maintenance. Order the TECWERK angle directly via Metav Werkzeuge or consult the Metav team for application advice and availability. Engineer’s square DIN 875/1 — TECWERK, legs 500 x 330 mm (no stop) The Engineer’s square DIN 875/1 is a workshop layout and inspection instrument designed for accurate right-angle checks and large-format marking tasks, supplied without an integrated stop for flexible positioning. Precision ground to DIN 875/1 standard Long legs 500 x 330 mm for large layouts Robust 40 x 8 mm cross-section Supplied without stop for flexible use Accuracy that supports consistent production quality Built to the DIN 875/1 tolerance class, the instrument provides a dependable reference for square checks and layout work. The precision-ground faces guarantee a true 90° edge across its full length, which simplifies alignment and reduces rework. For quality assurance routines, the consistent geometry aids in traceable measuring procedures and contributes to fewer production deviations, enhancing throughput and lowering inspection time per part. Stiffness and stability for repeatable results The substantial 40 x 8 mm cross-section gives the tool mechanical rigidity that resists bending when applied to larger workpieces. With legs measuring 500 x 330 mm, the design balances reach and stiffness so that marking, scribing and inspection operations remain stable across the supported surface. The absence of an integrated stop allows flexible seating and repositioning on diverse components, making the square suitable for bench work and on-machine checks where a fixed heel would be restrictive. Practical benefits for workshop and inspection tasks As a simple, robust measuring implement, the square enables faster setup for machining, assembly and final inspection. Its long legs reduce the need for secondary alignment tools when working on plates, frames or assemblies, supporting efficient workflow in small series and maintenance jobs. The tool’s straightforward geometry means little maintenance is required beyond keeping faces clean and free from burrs, which helps to preserve repeatability over time. Integration into procurement and daily use The plain execution without stop and the clear dimensional specification simplify storage, replacement and integration into inspection kits. The compact packaging unit supports measured stocking decisions and the familiar DIN reference eases documentation in quality systems. For customers seeking a dependable angle reference for marking and verification, this configuration delivers a pragmatic balance of reach, rigidity and conformity to established metrology standards. Contact Metav Werkzeuge for tailored advice on the TECWERK engineer’s square and to secure reliable supply from Emmerich — Metav’s specialists will confirm suitability and delivery options. Technical Data Article number: 2000858432NW Label: Winkel DIN 875/I Schenkel-L.500x330mm o.Anschlag TECWERK Manufacturer: TECWERK Product type: Winkel Execution: without stop Cross-section: 40 x 8 mm Leg lengths: 500 x 330 mm Packaging unit: 1 UID: 2000858432NW Numbers / Core technical data Leg lengths: 500 x 330 mm Cross-section: 40 x 8 mm Packaging unit: 1 Special features / Versions Standard: DIN 875/1 Execution: without stop (ohne Anschlag) Product type: angle (Winkel) SKU: 2000858432NW FAQ What tolerance class does this square comply with? The instrument is produced to the DIN 875/1 tolerance class, ensuring the right-angle faces meet the standard’s accuracy requirements for workshop squares. Are the leg lengths suitable for large-format layout work? Yes, the 500 x 330 mm leg combination provides extended reach for marking and inspection on larger plates and assemblies while maintaining stability. Does the square include a fixed stop or heel? The execution is specified without stop, allowing flexible placement and repositioning on a variety of component geometries. How does the 40 x 8 mm cross-section affect use? The 40 x 8 mm cross-section increases structural stiffness, improving repeatability and resistance to bending during marking and inspection tasks. Which SKU identifies this product for ordering and stock management? This TECWERK angle is listed under SKU 2000858432NW, which can be used for ordering and inventory tracking. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
500 x 330mm Angle Square With Stop, 40 x 8mm Section - TECWERK
A robust precision engineer's square to DIN 875/1 with legs of 500 x 330 mm and an integrated stop provides repeatable alignment and clear workshop reliability; its 40 x 8 mm cross-section enhances rigidity for handling and layout tasks. Order the item directly via Metav Werkzeuge or request technical clarification from our consultants for seamless procurement. TECWERK precision engineer's square DIN 875/1 – legs 500 x 330 mm with stop The TECWERK precision engineer's square DIN 875/1 is a workshop-grade metrology tool for accurate alignment, layout and repeatable set-ups across inspection benches and machine workstations. DIN 875/1 accuracy class Legs 500 x 330 mm Integrated stop for repeatable set-ups Cross-section 40 x 8 mm for rigidity Accurate alignment for inspection and layout work Manufactured to the DIN 875/1 standard, this precision square delivers a verifiable reference angle for inspection and layout operations. The normative classification denotes a controlled geometric tolerance, making the tool suitable where angular precision is critical in setting-up jigs, checking perpendicularity or transferring marks from component to component. By relying on a standardised accuracy class, processes that depend on consistent right angles benefit from reduced rework and improved first-pass quality. Stiff construction for stable measurements and handling The square's 40 x 8 mm cross-section provides structural stiffness that minimises flex under normal bench use. A rigid profile improves contact stability against faces and edges, which in turn reduces measurement scatter during layout or inspection. This construction characteristic supports faster, more reliable positioning because the reference edge maintains its straightness during repeated handling, ensuring the tool contributes to efficient and consistent workflows rather than becoming a variable in the process. Integrated stop for repeatable set-ups and batch work The supplied stop enables quick, reproducible positioning of parts without elaborate clamping arrangements. In practical terms, the stop converts individual alignment steps into a repeatable routine: place the workpiece against the stop, bring the square to bear and mark or check the part. This is particularly useful for small production runs, maintenance tasks and quality checks where consistent reference points accelerate throughput while maintaining the required accuracy level. Practical applications and workshop compatibility With leg lengths of 500 x 330 mm, the square suits a wide range of workshop tasks from component layout to machine-room inspection. The proportions offer a balance between reach and manoeuvrability, so the tool functions well on inspection plates, assembly jigs and hand-operated benches. For users requiring a dependable right-angle reference that integrates into existing inspection setups, the solid profile and built-in stop simplify handling and reduce setup time. Contact Metav Werkzeuge in Emmerich for availability, technical advice or a bespoke quotation for the TECWERK precision engineer's square and professional procurement assistance Technical Data Article number (SKU): 2000858442NW Item label: Angle square DIN 875/1 legs 500 x 330 mm with stop, TECWERK Product type: Angle square Manufacturer: TECWERK Execution: with stop Packaging unit: 1 Dimensions & Key Figures Legs (L x L): 500 x 330 mm Cross-section: 40 x 8 mm Accuracy standard: DIN 875/1 Special features Integrated stop for repeatable positioning Robust cross-section for enhanced rigidity Suitable for workshop layout and inspection tasks FAQ What accuracy standard does the tool meet? The TECWERK precision engineer's square conforms to DIN 875/1, providing a recognised tolerance class for right-angle references. Is this square suitable for machine set-up and inspection tasks? Yes — with leg dimensions of 500 x 330 mm and a rigid profile, the square is designed for layout, inspection and many set-up procedures on benches and plates. How does the integrated stop improve repeatability? The stop creates a fixed datum against which parts can be placed quickly, enabling consistent positioning and reducing the time needed for repeated measurements. Does the cross-section support heavy workshop use? The 40 x 8 mm cross-section increases stiffness and helps maintain edge straightness during regular bench use, improving stability for routine inspection and marking tasks. What is the article number for ordering or reference? The article number (SKU) for this TECWERK angle square is 2000858442NW Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
500 x 500 mm Flange Square Zinc-Plated, No Packaging - Metav IndustryLine
Robust galvanised construction with precise 500 × 500 mm working faces and a lightweight 2.1 kg format provides dependable squaring and easy handling; order the flange square directly via Metav Werkzeuge or ask our consultants if needed. Flange square M214.542 — 500 × 500 mm galvanised (Metav IndustryLine) A flange square designed as a stable right‑angle reference for alignment and inspection tasks in workshop and fabrication environments. Robust galvanised special steel construction Precise 500 × 500 mm working faces Conforms to factory inspection standard Lightweight at 2.1 kg for easy handling Durable, corrosion‑resistant build for long service life The fully galvanised body, manufactured from special steel, is intended to withstand typical workshop atmospheres and light exposure to moisture without premature surface degradation. This corrosion protection reduces the need for frequent maintenance and preserves the flatness of the reference faces, which supports repeatable set‑ups and reduces rework. The comparatively low mass at 2.1 kg allows straightforward handling by a single operator while maintaining sufficient rigidity for routine squaring tasks. Stable reference faces that speed assembly and inspection With 500 × 500 mm contact surfaces, the square provides a broad, stable reference that simplifies alignment of flanges, plates and fixtures during welding, drilling or bolting operations. The large faces reduce the number of repositionings required to check a component, shortening set‑up times and improving throughput. Dimensional stability and well‑defined edges translate into a reliable geometric reference, enabling faster decision making on the shop floor and fewer trial adjustments during assembly. Workshop compatibility and practical delivery Produced to the supplier’s factory standard, the angle square is suitable for general fabrication, inspection jigs and bench checking. The item is supplied without additional packaging, which supports immediate introduction to production or direct storage on workshop racks. Intended as a practical, no‑frills metrology tool, the unit is compatible with existing inspection workflows and complements a small‑tool inventory for fabrication shops and maintenance teams. Integration into stock is simplified by clear identification via SKU and GTIN for traceable logistics. For a robust, galvanised flange square from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply of the flange square (SKU M214.542) Technical data Article number: M214.542 GTIN: 4054469109145 eClass: 21170128 Tariff number: 90178090 Facts Dimensions: 500 × 500 mm Weight: 2.1 kg Special features Material: special steel, galvanised Standard: factory standard (Werksnorm) Packaging: supplied without packaging Category: Winkel (angle square) FAQ What is the primary use of this flange square? The flange square (Metav IndustryLine, SKU M214.542) serves as a stable right‑angle reference for aligning, squaring and inspecting flanges, plates and fixtures in fabrication and assembly tasks. Is the surface protected against corrosion? Yes, the body is galvanised; the galvanised finish on the special steel provides corrosion resistance suitable for typical workshop conditions. Can the square be handled by one person? At 2.1 kg, the flange square is lightweight enough for single‑person handling while providing sufficient stiffness for routine checks. Does the product comply with any specific inspection standard? The unit is manufactured to the supplier’s factory standard (Werksnorm), ensuring consistent production checks and traceability. How is the item delivered with regard to packaging? The product is supplied without packaging, allowing immediate use or direct storage in workshop racks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Angle Adjustable Steel Bevel Gauge With Locking Wing Nut, Zinc Plated - TECWERK
Take advantage of the combination of galvanised steel construction, a 500 mm leg length and a robust screw hinge for accurate, repeatable angle setting in heavy-duty workshop tasks; order via Metav Werkzeuge or contact our consultants for technical advice. Adjustable Bevel Square 500 mm – galvanised steel, screw hinge | TECWERK An Adjustable Bevel Square 500 mm is designed for setting and checking arbitrary angles in metalworking and general workshop applications Galvanised steel construction 500 mm leg length for large layouts Screw hinge with wing nut locking Ground high edges and flat faces Consistent accuracy through robust construction The tool combines a galvanised steel frame with professionally ground edges and flat faces, providing a durable reference that resists deformation during routine use. The long legs (500 mm) ensure a stable bearing surface across a broad area, which reduces deflection when comparing or marking large components. Because the hinge and contact faces are finished, the gauge maintains repeatable results, supporting quality control processes where dimensional stability is required. Fast, secure angle adjustment to speed up layout work A screw hinge and a wing nut locking mechanism allow the two movable legs to be set to any angle and securely clamped in place. This arrangement delivers both fine adjustment and quick locking, cutting setup time on repetitive tasks. The capacity to fix angles rapidly reduces stoppages on the shop floor and improves throughput, making the device a pragmatic choice for layout, fabrication and assembly stations where time-efficiency and reliable clamping are priorities. Low maintenance and corrosion resistance for long service life The galvanised finish gives the instrument enhanced corrosion protection compared with bare steel, so the tool remains serviceable in humid or mildly corrosive workshop environments. The simple mechanical design keeps maintenance minimal: occasional cleaning and inspection are sufficient to retain accuracy. The product is marked as inspection required, which supports traceability and compliance with in-house quality procedures or inspection schedules. Practical fit for workshop workflows and inspection regimes The bevel square serves as a versatile reference for fitters, fabrication shops and maintenance teams who need a portable, dependable means of transferring and checking angles. Its inspection-required status allows it to be integrated into formal calibration cycles where documented checks are necessary. Supplied by a trusted distributor, this angle gauge is intended to slot into established production routines without adding complexity. Contact Metav Werkzeuge for specialist advice or to arrange supply of the TECWERK Adjustable Bevel Square with 500 mm legs and galvanised finish Technical Data Article number: 2000858434NW UID: 2000858434NW Manufacturer: TECWERK Product type: Adjustable bevel square Packaging unit: 1 Facts Leg length: 500 mm Inspection required: yes Special features Material: steel, galvanised Screw hinge Wing nut locking High edges and flat faces ground Two movable legs adjustable to any angle FAQ What material is the bevel square made from? The TECWERK Adjustable Bevel Square is made from galvanised steel, giving corrosion resistance and mechanical stability. How long are the legs on the tool? The legs measure 500 mm, providing an extended reference length for marking and checking larger components. Can the angle be fixed securely during work? Yes, the screw hinge together with the wing nut allows the two legs to be set to any angle and reliably clamped for repeatable results. Is the instrument suitable for formal inspection routines? The device is designated as inspection required, making it suitable for inclusion in documented inspection or calibration cycles. Which applications is this bevel square best suited to? This angle gauge is ideal for metalworking layout, fabrication checks and general workshop tasks where a robust, portable angle reference is needed. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
500mm Angle Plate Steel, Zinc-Plated With Wing Nut - Metav IndustryLine
Take advantage of a sturdy, low‑maintenance fixturing solution with a mild steel body, zinc‑plated finish and a tool‑free wing nut for fast locking; the 500 mm rail gives the extra reach needed for larger setups. Order the adjustable angle bracket directly via Metav Werkzeuge or contact the consultants for bespoke advice. Adjustable angle bracket, 500 mm — mild steel, zinc‑plated (Metav IndustryLine) A robust adjustable angle bracket, 500 mm, designed for reliable clamping and fixturing in workshops and light industrial production settings Robust mild steel construction Zinc‑plated surface for corrosion resistance Quick adjustment with wing nut 500 mm rail for extended reach Built for reliability and long service life The bracket is manufactured from mild steel and finished with a zinc‑plated coating to combine structural strength with corrosion resistance. This material pairing reduces long‑term replacement costs and ensures consistent performance in mixed workshop environments. The construction resists bending under normal clamping loads, helping to maintain alignment and repeatability across multiple set‑ups. Fast setup and secure positioning for efficient workflows A wing nut provides tool‑free locking for rapid adjustments, speeding up changeovers and reducing downtime on repetitive tasks. The 500 mm rail offers extended reach for larger fixtures or jigs while remaining manageable for single‑operator handling. Clear, repeatable clamping improves throughput and supports more predictable production cycles, making the bracket a practical choice for pragmatic workshop optimisation. Versatile in application, simple to integrate The design suits a range of domestic and industrial tasks from general fixturing to assembly aids on machine tables. Its straightforward geometry allows incorporation into bespoke jigs or standardised fixtures without complex modification. Paired with routine maintenance of the plated surface, the bracket keeps dimensional stability and functional integrity, delivering dependable support for everyday operations. Contact Metav Werkzeuge for tailored advice on integrating the 500 mm adjustable angle bracket into production or to discuss compatible fixturing options Technical data Article number: M214.946 SKU: M214.946 Brand: Metav IndustryLine Length: 500 mm Material: mild steel Surface: zinc‑plated Fastening: wing nut FAQ How is the bracket secured in position? The bracket is locked by a wing nut; the wing nut enables tool‑free tightening and quick, reliable clamping. What material and finish does the bracket have? The adjustable angle bracket is made from mild steel with a zinc‑plated finish to provide corrosion resistance and robust mechanical behaviour. Is the 500 mm length suitable for larger fixtures? The 500 mm rail offers extended reach suitable for medium‑sized fixtures and jigs while remaining manageable for standard workshop handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Flange Angle L-Arm 125x70mm Flange Width 30x5mm - TECWERK
Take advantage of a compact, measurable design that combines clear mounting geometry with dependable rigidity — the TECWERK flange angle delivers repeatable assembly results and straightforward stock handling; order directly via Metav Werkzeuge or consult our specialists for technical clarification. Flange angle, legs 500 x 500 mm, flange 125 x 70 mm — TECWERK The flange angle 500 x 500 mm is a robust angle bracket designed for structural joining and reinforcement, offering a defined flange area for reliable attachment in workshop and industrial applications Heavy-duty angle with flange 125 x 70 mm Legs 500 x 500 mm for stable connections Cross-section 30 x 5 mm for high rigidity Single-piece supply, ready for installation Dependable geometry for predictable load distribution The defined legs 500 x 500 mm and cross-section 30 x 5 mm create a clear, reproducible profile that simplifies design decisions. With the flange 125 x 70 mm providing an extended mounting area, the component is intended to distribute loads over a larger contact surface and reduce stress concentrations. This measurable geometry supports engineering calculations, making it easier to specify the part within assemblies where repeatable mechanical behaviour is required. The precise dimensions mean fitting and alignment can be planned in advance, reducing trial adjustments on the shop floor. Streamlined integration and reduced inventory complexity Supplied as a single unit supply, the bracket is straightforward to order and stock. The generous mounting area of the flange allows flexible attachment options for brackets, plates or frames without the need to redesign mating parts. Where quick turnaround and predictable parts lists are valued, the compact specification removes ambiguity from procurement and speeds up ordering cycles. The clear, numeric attributes lend themselves to fast comparison with alternative components and permit immediate inclusion in bills of materials. Consistent assembly results through clear specification The bracket’s repeatable geometry supports consistent alignment across multiple assemblies and batches. Where interchangeability matters, this component enables reproducible joins and predictable clearances in jigs, fixtures and framework. Reference SKU 2000858412NW when checking compatibility; the standardised dimensions assist in selecting complementary fasteners and supports so that production tolerances remain stable. The product’s straightforward description reduces ambiguity during planning and handover between design and fabrication teams. Makes specification, planning and documentation easier Using a component with clearly stated dimensions simplifies CAD modelling and parts lists: the numeric values can be inserted directly into drawings and procurement documents, accelerating project schedules. The bracket’s attributes are conducive to modular construction and make it easier to scale assemblies or replace elements without extensive redesign. For operators and engineers who prioritise clarity and traceability in their procurement, the explicit dimensions provide a practical basis for selection and quality control. Contact Metav Werkzeuge for availability and technical advice on the TECWERK flange angle; Metav Werkzeuge supports delivery from Emmerich and can provide further specification guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000858412NW Label: Flanschenwinkel Schenkel-L.500x500mm Flanschweite 125x70mm TECWERK Manufacturer brand: TECWERK Product type: Flange angle Packaging unit: 1 Facts Legs (L): 500 x 500 mm Flange width: 125 x 70 mm Cross-section: 30 x 5 mm SKU / UID: 2000858412NW Special features Single-piece supply Defined flange area for attachment Reproducible geometric dimensions Suitable for workshop and industrial assembly FAQ Is this flange angle suitable for structural joining in frame assemblies? The flange angle is specified with legs of 500 x 500 mm and a flange of 125 x 70 mm; these dimensions make the component suitable for frame and bracket assemblies where a defined mounting area and reproducible geometry are required. What measurable values should be used for CAD modelling? Use the stated legs (500 x 500 mm), flange dimensions (125 x 70 mm) and cross-section (30 x 5 mm) from SKU 2000858412NW when integrating the part into CAD models and parts lists. How is the product supplied for inventory management? The TECWERK flange angle is supplied as a single unit, allowing straightforward stocking and direct inclusion in bills of materials. Can the flange area accommodate multiple fastener options? The flange 125 x 70 mm provides a generous mounting area suitable for a variety of attachment strategies; specific fastener choice should be matched to the application and load case. How is repeatability ensured across multiple assemblies? Repeatable assembly is supported by the component’s fixed geometry—legs, flange and cross-section are defined numerically to ensure consistent alignment and fit across batches. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
500mm Machinist's Try Square With Stop, Galvanised Special Steel - Metav IndustryLine
Benefit from a combination of robust galvanised construction, a fixed stop for repeatable positioning and generous measuring faces that support accurate right‑angle layout; order the engineer’s square directly via Metav Werkzeuge or consult the specialists for application advice. Engineer’s square M214.529 – 500 × 280 mm, galvanised stop | Metav IndustryLine The Engineer’s square M214.529 is a heavy‑duty layout square for precise right‑angle marking and alignment in metalworking, equipped with a galvanised stop for repeatable positioning. Heavy-duty special steel, galvanised finish Integrated stop for repeatable positioning Generous 500 × 280 mm measuring faces Suitable for workshop and sheet metal layout Precision where repeatability matters The M214.529 is designed to deliver consistent right‑angle results on repeat jobs. The combination of a rigid stock and a broad blade provides a stable reference that reduces flex during marking; this improves reproducibility when transferring datum lines or checking squareness on welded frames. The integrated stop enables repeatable positioning without the need for improvised clamps, so each layout cycle produces comparable outcomes. For production environments where traceable set‑up is required, the solid mechanical design reduces variance and supports efficient quality control. Corrosion resistance and durable service life Constructed from special steel with a galvanised finish, this square resists workshop moisture and mild corrosive exposure, extending service life compared with untreated tools. The surface treatment maintains clear, usable measuring faces that tolerate daily handling and light abrasion. The robust build also minimises wear at the critical 90° junction; as a result, the tool sustains its alignment over prolonged use, which translates into fewer rechecks and less rework on assemblies. This durability benefits maintenance schedules and lowers total cost of ownership through extended intervals between replacements. Practical benefits for metalworking and fabrication Large‑format layout tasks benefit from the 500 × 280 mm geometry: the length gives reach across sizeable panels while the stock depth provides a stable reference for scribing and marking. The tool is equally applicable for setting up jigs, checking fixture squareness and aligning profiles before welding. Combining the clear datum face and the fixed stop, the square supports fast, repeatable setups that help maintain throughput on batch work. The simple mechanical function removes reliance on powered devices for basic squareness checks and keeps routine operations straightforward and reliable. For workshop teams seeking a durable, galvanised layout square with repeatable positioning, contact Metav Werkzeuge to secure the Metav IndustryLine M214.529 and obtain specialist guidance from Emmerich stockists. Technical data Article number: M214.529 GTIN: 4054469109077 Dimensions: 500 × 280 mm Weight: 1.5 kg Facts Material: Special steel, galvanised Standard: Werksnorm Tariff number: 90178090 Special features With stop (repeatable positioning) Category: Square (Winkel) Intended use: Layout and alignment in metalworking FAQ What materials is this square suitable for? The M214.529 engineer’s square is made from special steel with a galvanised finish, making it suitable for general workshop and sheet‑metal layout tasks. How does the integrated stop improve workflow? The integrated stop on the engineer’s square provides repeatable positioning, enabling faster setups and more consistent marking across multiple parts. Is the square suitable for large panels and fixture setup? Yes; the 500 × 280 mm dimensions give sufficient reach and a stable face for aligning larger panels, jigs and fixtures in fabrication work. How is accuracy maintained over time? Accuracy is preserved through a rigid construction and corrosion‑resistant galvanised finish, which together reduce wear at the 90° junction and help retain squareness during regular use. What is the manufacturer and how can the product be sourced? The square is a Metav IndustryLine product, stocked and distributed by Metav Werkzeuge GmbH; enquiries and purchases can be handled directly through their European distribution channels. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm x 250mm Angle Plate With Stop, 40 x 8mm Cross-Section - TECWERK
Take advantage of a tool that combines DIN 875/II accuracy with large-format legs and an integrated stop for reproducible layout results — a pragmatic choice for workshop inspection and production layout. Order the TECWERK engineer's square directly via Metav Werkzeuge or ask our consultants if needed. TECWERK engineer's square to DIN 875/II – legs 500 x 250 mm (with stop) A TECWERK engineer's square to DIN 875/IIis designed for precise right-angle checks and repeatable layout tasks in workshop and production environments Accuracy class DIN 875/II for precise right angles Legs 500 x 250 mm for large layout tasks Cross-section 40 x 8 mm for rigid profile Integrated stop for repeatable positioning Industrial-grade accuracy for dependable measurement The square conforms to DIN 875/II, providing measured assurance when verifying right angles during inspection or assembly. This conformity means tolerance bands are controlled and comparable across tools, which translates into fewer measurement disputes and more consistent quality checks. The instrument’s precision is beneficial where tolerances matter: inspection benches, incoming goods checks and first-article verifications all gain from a standardised reference that reduces rework and prevents misalignment early in the process. Faster layout and repeatable positioning for workflow efficiency With its legs 500 x 250 mm, the tool covers larger components without the need for additional fixtures, speeding up layout work and marking operations. The integrated stop allows for repeatable positioning when multiple identical setups are required, reducing cycle time for serial marking or jig alignment. The practical result is improved throughput: fewer adjustments, clearer references and a measurable time saving on recurring tasks. Stable geometry for long-term reliability The cross-section 40 x 8 mm delivers a rigid profile that resists bending under normal workshop use, helping to maintain the right angle over repeated handling. A rigid construction supports consistent readings and reduces the need for frequent recalibration. For quality managers and toolroom supervisors, this stability lowers the administrative burden associated with traceability and instrument control, because a robust square retains its geometry longer under typical working conditions. Suited to workshop inspection, layout and quality control This engineer's square is appropriate for metalworking shops, maintenance departments and precision assembly lines where a reliable angle reference is required. The combination of standard conformity, big legs and a stop makes it useful for setting up jigs, checking welded frames and verifying component squareness before final assembly. If clarification of technical compatibility is needed for specific applications, Metav’s technical documentation can supply supplementary data to support purchasing decisions. For dependable right-angle verification request the TECWERK engineer's square via Metav Werkzeuge — benefit from Emmerich-based supply and advice; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000858350NW Label: Winkel DIN 875/II Schenkel-L.500x250mm m.Anschlag TECWERK Manufacturer: TECWERK Product type: Engineer's square Execution: with stop Dimensions & profile Legs (L x L): 500 x 250 mm Cross-section: 40 x 8 mm Packaging unit: 1 Special features Accuracy class: DIN 875/II Integrated stop for repeatable positioning SKU: 2000858350NW FAQ What accuracy standard does this square meet? The TECWERK engineer's square meets DIN 875/II, which defines the tolerance class for right-angle accuracy used in workshop inspection. What are the leg dimensions and why do they matter? Legs of 500 x 250 mm provide an extended reference surface for larger components, improving layout speed and reducing the need for auxiliary supports. Is the instrument suitable for repeated layout tasks? Yes; the integrated stop enables repeatable positioning, making the square well suited to serial marking and repeated set-ups. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
500mm x 280mm Machinist Square With Stop, 25 x 5 mm Cross Section - TECWERK
Combine the robust 25 x 5 mm cross-section with leg lengths of 500 x 280 mm for stable, accurate right-angle work; the integrated stop provides repeatable positioning. Order the fitter's square directly via Metav Werkzeuge or consult our specialists for application advice. Fitter's square 500 x 280 mm with stop (TECWERK) — 25 x 5 mm cross-section A fitter's square 500 x 280 mm designed for precise right‑angle marking and checking in metal fabrication and workshop fitting, supplied with an integrated stop for repeatable set‑ups. Robust 25 x 5 mm steel section Leg lengths 500 x 280 mm for large components Integrated stop for repeatable positioning Suitable for metal fabrication and fitting Engineered for consistent right-angle accuracy The square is built around a 25 x 5 mm section that provides notable rigidity and resistance to bending under normal workshop use. This construction enables precise alignment when marking or checking edges on plates and assemblies; the solid section minimises flex that can lead to measurement drift. In practice, a stable cross-section reduces rework and speeds up tasks such as scribing, checking perpendicularity before welding, and verifying assembled frames. Where tolerance control is required, a robust angle tool like this delivers repeatable outcomes with minimal adjustment time. Integrated stop for faster, repeatable set-ups An integrated stop changes the workflow: components can be referenced against the stop for identical positioning without the need for clamps or repeated manual alignment. This feature supports repeatable positioning, which is particularly valuable during batch marking or when transferring layouts between parts. The stop also reduces handling time and the risk of measurement errors during layout work — a direct efficiency gain for shops producing multiple identical components. For fitting applications, the combination of leg length and stop simplifies jigs and temporary fixtures, effectively turning the tool into a quick reference gauge. Workshop-ready dimensions and practical handling With leg lengths of 500 x 280 mm, the tool covers a broad working envelope while remaining handheld for flexibility. The longer leg supports checks on larger panels and profiles, whereas the shorter leg facilitates marking and inside checks on assemblies. The overall design suits both bench work and on‑piece inspection at a machine or welding table. Careful handling and storage will preserve the square’s flatness; occasional inspection against a surface plate or known reference will confirm ongoing accuracy. For workshops seeking a reliable angle tool that balances reach and robustness, this configuration represents a practical compromise between usability and control. Choose the TECWERK fitter's square for robust, repeatable right‑angle checks and contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 2000858150NW SKU: 2000858150NW Product name: Fitter's square with stop Brand: TECWERK Facts Cross-section: 25 x 5 mm Leg lengths: 500 x 280 mm Package unit: 1 Special features With stop Product type: Fitter's square Intended use: right‑angle checking and marking FAQ What are the exact dimensions of this fitter's square? The fitter's square has leg lengths of 500 x 280 mm and a cross‑section of 25 x 5 mm (TECWERK, SKU 2000858150NW). Is the square suitable for metal fabrication? Yes, the square is designed for metal fabrication and fitting tasks where a rigid angle and an integrated stop aid marking and repeatable positioning. How does the integrated stop improve workflow? The integrated stop provides repeatable positioning so parts can be referenced consistently without re‑clamping, reducing set‑up time and measurement variance when using the square. Can the tool be used for final inspection or only for layout? The tool is intended primarily for layout and alignment checks; it offers reliable right‑angle verification for workshop use but should be cross‑checked against calibrated references for final inspection where certified tolerances apply. What should be done to maintain accuracy over time? Store the angle flat and avoid knocks; periodic comparison with a known reference face will confirm that the square maintains its flatness and right‑angle integrity. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
500x250 mm Angle Stop With Stop Feature, Hardened Stainless Steel, DIN 875/2 - Metav IndustryLine
Take advantage of the combination of DIN 875/2 conformity, hardened stainless-steel construction and a generous 500 × 250 mm face for reliable 90° set-ups; order the item directly via Metav Werkzeuge or contact our consultants for technical advice. Squaring Angle 500 x 250 mm (DIN 875/2) by Metav IndustryLine — Hardened Stainless Steel, with Stop The Squaring Angle 500 x 250 mm is a hardened stainless-steel squaring tool designed for accurate 90° set-ups and inspection tasks in metalworking and workshop metrology. Hardened stainless steel construction Accuracy to DIN 875/2 standard 500 × 250 mm flat faces for set-up Supplied with an integral stop in cardboard box Reliable 90° checks with traceable standard conformity The instrument is manufactured to DIN 875/2, providing a reproducible tolerance level for workshop inspection and machine set-up tasks. The combination of hardened stainless steel and precision-ground faces reduces wear and maintains perpendicularity over time, which means fewer rechecks and higher process reliability. This squaring instrument supports systematic alignment and inspection routines by offering a stable reference for assemblies and fixtures. Robust dimensions that balance reach and stiffness With flat faces of 500 × 250 mm, the tool supplies sufficient contact area for workpieces while retaining practical handling weight for bench use. The substantial profile increases rigidity during use, reducing deflection compared with smaller squares and improving measurement repeatability. An integral stop supports quick positioning for repetitive operations, simplifying set-up and saving time on production or maintenance tasks. Corrosion resistance and workshop suitability Constructed from stainless steel and hardened for durability, the device resists typical workshop corrosion and maintains surface integrity across regular use. The material choice allows use in environments where coolant or light contamination may occur, while the supplied cardboard box provides basic protection during storage and transport. As a Metav IndustryLine product, the instrument fits into a broader offering intended to make industrial-grade precision accessible within the workshop environment. Contact Metav Werkzeuge to discuss suitability for specific applications or to arrange prompt supply from our Emmerich stock — our technical team is available to advise on integration into existing inspection and set-up processes Technical data Article number: M214.380 GTIN: 4054469108568 Manufacturer: Metav IndustryLine Material: stainless steel, hardened Standard: DIN 875/2 Packaging: cardboard box Facts Dimensions: 500 x 250 mm Weight: 4.2 kg Zolltarifnummer: 90178090 ECLASS: 21170119 Special features with stop hardened measuring faces stainless steel construction supplied in cardboard box SKU: M214.380 FAQ What accuracy class does this squaring device comply with? The Squaring Angle 500 x 250 mm meets DIN 875/2, which defines the tolerance band for workshop squares and ensures reproducible 90° measurements suitable for many industrial inspection and set-up tasks. Is the squaring angle resistant to corrosion? Yes. The unit is made from hardened stainless steel, offering increased resistance to corrosion and wear compared with untreated steel reference tools. Can this tool be used for machine set-up and fixture alignment? Indeed. The combination of a large flat face, rigid profile and an integral stop makes the instrument suitable for setting up machines, aligning tooling and checking assemblies for squareness. How is the item delivered? The product is supplied in a cardboard box, providing basic protection for transport and storage as indicated on the product label. Is the squaring angle suitable for repetitive positioning work? Yes. The built-in stop and stable, hardened faces support repetitive positioning and help reduce set-up time for batch or series operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500x250 mm Control Square Flat, DIN 875/2, Cardboard Box - Metav IndustryLine
Take advantage of a robust DIN 875/2 tolerance class and a sturdy carbon steel construction in a compact 500 x 250 mm format for reliable right‑angle checks; order the inspection square directly via Metav Werkzeuge or ask our consultants for application advice. Inspection square M214.559 — control square, 500 x 250 mm, DIN 875/2 (Metav IndustryLine) The inspection square M214.559 is a precision control tool for right‑angle verification in machine and tool rooms, suitable for layout, inspection and assembly tasks Manufactured to DIN 875/2 tolerance class Flat design for stable contact surfaces Carbon steel construction for long service life Supplied in a cardboard box for safe transport Repeatable right‑angle checks for quality assurance Manufactured in accordance with DIN 875/2, this inspection square delivers the repeatability required for workshop quality control and set‑up work. The defined tolerance class ensures that angle errors remain within an industry‑recognised band, which simplifies acceptance criteria during incoming inspection or final verification. The square is suited to routine checks on jigs, fixtures and machine set‑ups where consistent right angles prevent cumulative assembly errors and maintain machining tolerances. Robust construction that stabilises measurements A body made from carbon steel gives the instrument the mass and rigidity needed for secure seating against measured parts; the substantial weight contributes to stable contact without needing excessive clamping. The flat contact surfaces reduce rocking and permit a clean line of contact for both face and blade, which supports consistent results when transferring lines or confirming squareness on heavy components. The construction is aimed at typical industrial environments where durability and low maintenance are priorities. Practical handling and workshop logistics With a working dimension of 500 x 250 mm, the square balances reach and handling: long enough for medium‑sized assemblies yet compact enough for single‑person use during inspection or layout. Supplied in a cardboard box, the instrument is protected for transport and temporary storage while remaining easy to unpack on the shop floor. The simple geometry and clear tolerancing reduce set‑up time and allow technicians to integrate the tool into daily inspection routines without complex fixtures. Typical applications and compatibility with shop practice The control square is primarily intended for right‑angle verification, layout work and quick alignment tasks in metalworking and fabrication shops. Its specification to DIN 875/2 makes it appropriate for suppliers and in‑house shops adhering to common European tolerance regimes, and its carbon‑steel make renders it suitable for general workshop use where corrosion can be controlled. The instrument complements existing metrology sets and serves as a reliable reference during assembly, welding checks and machine tool set‑up. For confident right‑angle inspection and dependable workshop practice, contact Metav Werkzeuge to request the Metav IndustryLine inspection square M214.559; our consultants will advise on suitability and delivery—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M214.559 GTIN: 4054469109237 Tariff number: 90178090 Material: carbon steel (Normalstahl) Norm: DIN 875/2 Weight: 4.1 kg Size: 500 x 250 mm Packaging: cardboard box Facts Length: 500 mm Blade/thumb: 250 mm Weight: 4.1 kg GTIN: 4054469109237 Tariff number: 90178090 Special features Flat contact surfaces Robust carbon steel body Supplied in cardboard box Metav IndustryLine product FAQ What accuracy class does the square conform to? The inspection square conforms to DIN 875/2, providing a clear tolerance class for right‑angle checks suitable for standard workshop control. Is the material corrosion resistant? The body is made from carbon steel (Normalstahl); the inspection square will resist routine handling but should be stored dry and protected from prolonged exposure to moisture to avoid surface rust. What is the working size of the tool? The working dimensions are 500 x 250 mm, which is intended for medium‑sized assemblies and layout tasks in machine and fabrication shops. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500x250 mm Inspection Square Flat Stainless Hardened, DIN 875/2, Cardboard Box - Metav IndustryLine
Combine the hardened stainless-steel construction with DIN 875/2 accuracy and the generous 500 × 250 mm measuring faces to achieve reproducible right-angle checks across production and inspection tasks. Order the inspection square directly via Metav Werkzeuge or consult our specialists for sizing and delivery options. Inspection square M214.370 — hardened stainless steel, DIN 875/2, 500 × 250 mm The Inspection square M214.370 is a hardened stainless-steel angle gauge designed for workshop and quality-control use, offering stable contact and conformity with DIN 875/2 for consistent squareness verification. Hardened stainless-steel construction DIN 875/2 accuracy class Flat design for stable contact Large 500 × 250 mm measuring faces Reliable right-angle verification for production control The robust geometry of this precision angle provides repeatable reference points for alignment and squareness checks. With DIN 875/2 conformity and wide 500 × 250 mm measuring faces, the tool serves as a dependable reference in machining, assembly and jig setup. The large, flat faces reduce the need for repositioning and speed up inspection cycles, supporting consistent quality control and fewer production interruptions. This translates directly to measurable time savings during setup and inspection routines, while preserving measurement integrity. Built to remain accurate under workshop conditions A hardened finish on stainless steel ensures long-term resistance to wear and corrosion, maintaining edge definition and contact geometry. The design is intentionally flat, giving stable seating against workpieces and reducing measurement variability caused by uneven contact. At approximately 4.1 kg, the mass contributes to steadiness without impairing handling for a single operator when repositioning. Supplied in a protective cardboard box, the instrument arrives ready for immediate use and uncomplicated storage between shifts. Practical integration into inspection routines and fixtures As a precision angle, the device functions both as a standalone reference and as a datum when building or verifying fixtures and assemblies. The combination of robust material and standard compliance supports use as a traceable workshop standard for routine checks and incoming part inspection. The piece complements existing metrology kits and can be referenced during process validation to reduce rework and boost confidence in assembly alignment—benefits that improve throughput and help maintain product reputation in demanding industrial environments. Request the Metav IndustryLine inspection square via Metav Werkzeuge for assured squareness in production; our Emmerich team will advise on suitable sizes and ensure secure delivery from stock. Technical data Article number: M214.370 GTIN: 4054469108483 Manufacturer: Metav IndustryLine Material: stainless steel, hardened Standard: DIN 875/2 Packaging: cardboard box Weight: 4.1 kg Facts Measuring faces: 500 × 250 mm Weight: 4.1 kg Tariff number: 90178090 Special features Flat design for stable contact Hardened stainless-steel construction Conforms to DIN 875/2 Supplied in cardboard box FAQ What is the intended use of this inspection square? The inspection square M214.370 from Metav IndustryLine is intended for right-angle verification, alignment checks and fixture set-up in workshop and quality-control environments. Is the material suitable for long-term workshop use? Yes, the M214.370 is made of hardened stainless steel which offers wear and corrosion resistance suitable for routine industrial use. Does the tool meet an industry standard for accuracy? The inspection square complies with DIN 875/2, providing a defined tolerance class for reproducible squareness checks. How large are the measuring faces and what advantage do they provide? The 500 × 250 mm faces offer broad contact surfaces that reduce the need for repositioning and speed up inspection tasks while improving repeatability. How is the product delivered and protected in transit? The inspection square M214.370 is supplied in a cardboard box to protect the instrument during transport and initial storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500x250 mm Stop Square With Stop, DIN 875/2, Cardboard Box - Metav IndustryLine
Combining DIN 875/2 accuracy, robust normal steel construction and an integrated stop, this squaring angle provides stable, repeatable reference faces for workshop metrology. Benefit from precise alignment and resilient mechanical support in assembly or inspection processes — order the squaring angle directly via Metav Werkzeuge or consult our specialists for application advice. Squaring Angle M214.579 – Angle plate 500 x 250 mm, DIN 875/2 (Metav IndustryLine) The Squaring Angle M214.579 is a heavy-duty angle plate with a built-in stop, designed for reliable squaring and fixture work in machine shops and inspection benches. Precision to DIN 875/2 Solid carbon steel construction Integrated stop for repeatable setups Supplied in cardboard box Accurate reference faces for repeatable setups The squaring angle is manufactured to DIN 875/2, which ensures industrial-grade angular accuracy suitable for general workshop metrology and production checks. The defined tolerance class means the tool creates a trustworthy 90° reference; this reduces rework and shortens setup times in jigs and fixtures. The 500 x 250 mm size balances reach with rigidity, so standard components can be located against a stable face without excessive flex. Robust material and stable handling improve measurement reliability Constructed from normal steel, the component offers a solid mass and contact stiffness that supports consistent alignment under moderate clamping forces. At approximately 4.2 kg, the plate sits securely during marking, inspecting or part assembly, improving repeatability because the tool resists unintended movement. The integrated stop simplifies repeated positioning tasks by providing a fixed datum, which speeds up batch work and reduces operator variability. Practical benefits on the shop floor and in the inspection room The tool is intended as a durable workshop aid: its flat, machined faces serve as both a checking surface and a mechanical stop for machining preparations, layout work and assembly. The integrated stop enables quick, repeatable seating of parts while the overall form factor retains good access for clamps and feeler gauges. Where a compact, dependable squaring solution is required, this angle plate combines ease of use with the necessary measuring confidence. Integration into daily workflow and quality routines Using a defined reference such as this squaring angle supports efficient quality routines: consistent set-up reduces measurement scatter and eases documentation when verifying component squareness. The unit’s compatibility with common bench procedures means it becomes a practical part of both production and inspection workflows. Supplied in a cardboard box for economical protection in transit, the item is ready to be staged on the bench or in a tool drawer for immediate use. For precise workshop squaring choose the Metav IndustryLine squaring angle M214.579 — contact Metav Werkzeuge for ordering or tailored application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.579 GTIN: 4054469109312 Weight: 4.2 kg Material: Normalstahl Standard: DIN 875/2 Dimensions: 500 x 250 mm Special feature: with stop Packaging: cardboard box Facts Weight: 4.2 kg Size: 500 x 250 mm Tariff code: 90178090 Special features Material: Normalstahl Accuracy class: DIN 875/2 Feature: integrated stop Packaging: in cardboard box Category: Winkel FAQ What level of angular accuracy does this squaring angle provide? The squaring angle is manufactured to DIN 875/2, giving industrial-grade angular accuracy suitable for general workshop measurement and alignment tasks with the Squaring Angle M214.579. Is the tool suitable for heavy-duty clamping and machining set-ups? Yes; the normal steel construction and the unit’s mass (about 4.2 kg) make the squaring angle robust enough for typical workshop clamping and repeated positioning operations. How does the integrated stop benefit repetitive work? The integrated stop on this angle plate provides a fixed datum for fast, repeatable seating of parts, reducing setup time and improving consistency during batch operations with the M214.579. Can the squaring angle be used on an inspection bench as a reference standard? The plate serves well as a workshop reference for alignment and inspection; for laboratory calibration standards, follow the facility’s traceability procedures before using it as a primary reference. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500x280 mm Carpenter Square Flat Galvanised, Works Standard - Metav IndustryLine
Take advantage of the combination of durable flat galvanised protection, special steel stiffness and a generous working face for consistent workshop layout and alignment. Order the flat galvanised machinist's square M214.509 directly via Metav Werkzeuge or consult our advisors if required. Flat galvanised machinist's square M214.509 — 500 x 280 mm, special steel (Metav IndustryLine) The Flat galvanised machinist's square M214.509 is a sturdy right‑angle reference designed for layout, alignment and marking tasks in metalworking and general workshop assembly. Flat galvanised finish for corrosion resistance Special steel construction for high stiffness 500 x 280 mm working faces for layout tasks Conforms to factory standard for consistent quality Consistent right angles that simplify workshop layout The robust right‑angle geometry provides a stable reference for marking and clamping operations. Constructed from special steel and finished with a flat galvanised coat, the tool resists surface corrosion while maintaining profile rigidity; this converts directly into repeatable lines and squaring operations rather than frequent rechecks. The broad faces reduce flex under hand pressure, which helps preserve angle fidelity across routine use and improves throughput in small‑batch fabrication. Built for durability and dependable handling The flat design and galvanised surface mean less maintenance in busy environments where oils, coolant mist or occasional exposure to moisture occur. The 500 x 280 mm working dimensions give a useful balance between reach and control: long enough to square medium assemblies, yet compact enough for single‑handed positioning. The tool’s mass and geometry also aid stable contact against workpieces, lowering the risk of accidental tilt during scribing or tacking. Straightforward integration into everyday shop routines As a non‑powered layout instrument, the square requires no calibration equipment and functions as an immediate quality aid at the bench. Its factory standard conformity provides assurance of consistent manufacturing tolerances that suit general mechanical workshops and maintenance departments. The plain geometry also makes it easy to use alongside clamping fixtures, straightedges or marking gauges, supporting a streamlined workflow for repetitive tasks. Choose Metav IndustryLine’s M214.509 for reliable, low‑maintenance squaring in metalworking — contact Metav Werkzeuge for tailored advice and prompt dispatch from Emmerich. Technical data Article number: M214.509 GTIN: 4054469108964 Tariff number: 90178090 Facts Dimensions: 500 x 280 mm Weight: 1 kg Standard: Werksnorm Special features Material: Special steel, galvanised finish Application: Layout, alignment, marking in metalworking Category: Angle / machinist's square Brand: Metav IndustryLine FAQ How is the right angle ensured with this square? The Metav IndustryLine M214.509 machinist's square is manufactured to a factory standard that ensures a true 90° reference; consistent geometry and material stiffness reduce deformation during normal workshop use. Is the galvanised finish suitable for wet workshop conditions? Yes, the flat galvanised coating on this machinist's square provides corrosion resistance appropriate for environments where splash or humidity occur, extending the tool’s service life. Can the square be used for larger assemblies? The 500 x 280 mm working faces make this angle suitable for medium‑sized components and fixturing; for substantially larger assemblies, users may prefer longer format gauges. What maintenance does the M214.509 require? Routine cleaning and light oiling of contact surfaces are sufficient; the galvanised finish reduces the need for frequent protection while preserving the tool’s bearing faces. Is this square suitable for welding set‑ups and tacking? Yes, the robust construction and flat faces make it well suited for marking and aligning parts prior to welding and tacking operations. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500x330 mm Angle Stop With Stop Feature, Hardened Stainless Steel, DIN 875/1 - Metav IndustryLine
The hardened stainless-steel 500 × 330 mm angle stop to DIN 875/1 provides a steadfast 90° reference for large assemblies; combine certified squareness and robust construction for repeatable set-ups and inspection. Order the angle stop directly via Metav Werkzeuge or consult our specialists for application advice. Angle Stop 500 × 330 mm, DIN 875/1, Stainless — Precision square with integrated stop (Metav IndustryLine) The Angle Stop 500 × 330 mm, DIN 875/1, Stainless is a workshop-grade precision square designed as a fixed 90° reference and indexing aid for machining, inspection and assembly tasks Hardened stainless-steel construction Certified 90° accuracy to DIN 875/1 Large legs 500 × 330 mm for big workpieces Supplied in cardboard box for safe transport Dependable 90° reference for large assemblies The 500 × 330 mm size gives a solid working envelope for larger components while preserving the rigidity required for accurate squaring. Built to DIN 875/1, the tool supplies a verifiable 90° right-angle reference that simplifies setup checks, alignment and inspection workflows. The certified geometry reduces guesswork during fixturing and ensures that the reference face can be relied upon for repeatable positioning, which translates into fewer reworks and a more efficient production rhythm. Hardened stainless construction for long-term stability Constructed from hardened stainless steel, the engineered mass and surface hardness resist wear and corrosion in busy shop environments. The increased weight and stiffness enhance stability when mating to flat surfaces, reducing chatter and movement during marking or clamping operations. These material properties extend service life and lower the need for frequent replacement, making the component a dependable investment for everyday metrology or bench fitting tasks. Integrated stop and practical workshop handling The built-in stop enables quick, repeatable locating of workpieces without the need for additional fixtures, cutting setup time for batch operations. Packaged in a robust cardboard box for transport, the tool is workshop-ready and easy to store between uses. Machined faces offer clear seating for parts and allow simple visual inspection of wear; routine checks against a master square will keep the reference within expected tolerances and maintain process reliability. Proven provenance and workshop support As part of the Metav IndustryLine range, this precision square benefits from a reliable supply chain and product oversight based in Emmerich. The combination of certified geometry, hardened stainless construction and practical design supports daily industrial use and contributes to consistent quality control across production stages. For buyers seeking pragmatic, measurable improvements in setup accuracy, this item integrates technical dependability with straightforward workshop utility. Discuss application requirements or arrange supply via Metav Werkzeuge; contact +49 2822 7131930 or info@metav-werkzeuge.com for tailored advice on the hardened 500 × 330 mm angle stop Technical data Article number: M214.340 GTIN: 4054469108247 Dimensions: 500 × 330 mm Weight: 4.2 kg Material: hardened stainless steel Standard: DIN 875/1 Facts Weight: 4.2 kg Size: 500 × 330 mm Tariff code: 90178090 Special features DIN 875/1 squareness accuracy Hardened stainless-steel construction With integrated stop for repeatable locating Supplied in cardboard box for transport FAQ What level of squareness accuracy does this angle provide? The angle stop meets DIN 875/1 requirements; the Angle Stop 500 × 330 mm from Metav IndustryLine is specified and manufactured to provide a certified 90° reference for shop and inspection use. Is the material suitable for workshop environments prone to corrosion? Yes. The unit is made of hardened stainless steel, so the Angle Stop 500 × 330 mm resists corrosion and surface degradation typical in metalworking environments. Can the integrated stop be used for batch locating of parts? The integrated stop enables repeatable locating and is intended to speed up batch set-ups and repetitive fixturing operations with reliable positioning. How is the product delivered and identified? The square is supplied in a cardboard box; identification is by SKU M214.340 and GTIN 4054469108247 for stock and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500x330 mm Inspection Square Flat Stainless Hardened, DIN 875/1, Cardboard Box - Metav IndustryLine
Take advantage of the combination of DIN 875/1 accuracy, hardened stainless construction and a flat profile for repeatable right‑angle checks; order the inspection square directly via Metav Werkzeuge or ask our consultants for application advice. Inspection Square M214.330 — DIN 875/1 precision, 500 × 330 mm (stainless, hardened) The Inspection Square M214.330 serves as a precision right‑angle reference for layout work and quality checks in metalworking and workshop inspection. Hardened stainless steel construction DIN 875/1 accuracy class 1 Flat design for close‑contact marking Dimensions 500 × 330 mm, solid 3.1 kg Dependable right‑angle control backed by DIN 875/1 The square is manufactured to DIN 875/1, which designates class‑1 tolerance for right‑angle measurement and ensures reliable reproducibility for layout and inspection tasks. This standard means the tool provides a defined angular deviation that is suitable for precision metrology and routine quality control in production environments. The conformity to DIN 875/1 supports traceable inspection workflows and reduces the need for repeated rechecks, delivering a measurable productivity gain in the inspection process. Durable stainless construction for lasting accuracy Constructed from hardened stainless steel, the device resists wear and corrosion while keeping its mating faces stable under workshop conditions. The mass and rigidity—reflected in a solid weight of 3.1 kg—help the tool sit firmly against components, reducing the risk of movement during marking or measurement. The flat profile minimises gaps between the reference face and the workpiece, improving contact for scribes and feeler measurements and extending the usable life of the right‑angle faces even under frequent use. Practical integration into workshop routines With leg lengths of 500 × 330 mm, the square bridges the gap between bench‑scale checks and larger assembly inspection, making it suitable for machine shops,toolrooms and test benches. Supplied in a cardboard box for economical protection, the item is ready to be stored or transported to the inspection point. The robust construction and standardised accuracy make the square an efficient tool for repeat layout, assembly alignment and final inspection tasks, helping to streamline quality control procedures and maintain consistent production tolerances. Choose the Metav IndustryLine inspection square for precise, durable right‑angle control — contact Metav Werkzeuge for tailored advice or to place an order: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Item number: M214.330 GTIN: 4054469108155 Manufacturer: Metav IndustryLine Facts Dimensions: 500 × 330 mm Weight: 3.1 kg Tariff number: 90178090 eClass: 21170119 Special features Material: stainless steel, hardened Standard: DIN 875/1 Design: flat Packaging: cardboard box FAQ What does DIN 875/1 tell me about the square? DIN 875/1 defines the tolerance class for right‑angle accuracy; the Inspection Square M214.330 complies with class‑1 limits suitable for precise workshop inspection and layout. Is the inspection square suitable for heavy workshop use? Yes, the hardened stainless steel construction and solid mass make the tool robust enough for regular use in machine shops and inspection benches. How should the square be stored to maintain accuracy? After cleaning and drying, store the square in its cardboard box or a dry tool drawer; avoid prolonged exposure to corrosive environments to preserve the hardened faces. Does the product include a calibration certificate? No specific calibration certificate is included by default; a certificate is supplied only when explicitly stated in the product labelling or order documentation. What typical tasks is this square intended for? The square is designed for layout, assembly alignment and right‑angle inspections in metalworking and quality control, where DIN‑class accuracy and stable reference faces are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500x330 mm Stop Square With Fence, DIN 875/1, Carbon Steel - Metav IndustryLine
Benefit from DIN 875/1 accuracy, a robust normal steel construction and an integrated stop that enables repeatable set-ups; order the squaring stop directly via Metav Werkzeuge or contact our consultants for application advice. Squaring stop 500 x 330 mm (DIN 875/1) — Precision angle with stop, Metav IndustryLine The Squaring stop 500 x 330 mm is a precision angle for layout, inspection and squaring tasks in machine and metal workshops, combining stable reference faces with a fixed stop for reproducible positioning. DIN 875/1 accuracy class Robust normal steel construction Integrated stop for repeatable set-ups Stable reference faces for reliable squaring Accuracy and reproducible alignment for production Engineered to the DIN 875/1 standard, this squaring device delivers the accuracy expected in professional workshop inspection and layout work. The dimensional format 500 x 330 mm provides a broad reference area while keeping the tool manageable at a weight of 4.2 kg, so setups remain stable without excessive handling. The integrated stop transforms individual measurements into repeatable operations: once the workpiece is registered against the stop and the straight edges, subsequent parts can be processed with consistent alignment. This configuration reduces rework, shortens setup times and supports lean production routines where reproducibility is essential. Durable build and operational benefits for everyday use Constructed from normal steel, the angle offers durable performance in routine shop environments; the material selection balances rigidity with economical service life. The solid profile provides stable reference faces that resist torsion during marking, clamping and inspection tasks. The presence of a stop, and the square’s overall geometry, simplifies fixturing on machine tables and inspection benches, reducing the need for additional jigs for many standard jobs. Maintenance is straightforward: clean, protect from prolonged moisture and store flat to preserve the reference edges and ensure continued reliability over many production cycles. Integrating the tool into quality control and layout workflows As a tool for layout, squaring and inspection, this angle supports quick transition from dimension checking to marking and assembly control. The wide reference surface and stop make it suitable for aligning components prior to welding, drilling or finishing where a right angle must be guaranteed across a series of parts. For shops that value traceable processes, the clear conformity to DIN 875/1 gives inspectors and operators a common, verifiable basis when documenting fit-up or inspection results. The combination of robust construction and practical ergonomics makes the device a dependable companion for metalworking tasks that require fast, repeatable right-angled references. Discuss your setup requirements with Metav Werkzeuge in Emmerich and secure the Metav IndustryLine squaring stop 500 x 330 mm with DIN 875/1 accuracy for durable, repeatable referencing — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M214.360 GTIN: 4054469108407 Dimensions: 500 x 330 mm Weight: 4.2 kg Facts Dimension format: 500 x 330 mm Weight: 4.2 kg HS tariff number: 90178090 Special features Material: Normal steel Standard: DIN 875/1 Feature: with stop Manufacturer: Metav IndustryLine SKU: M214.360 FAQ What level of accuracy does DIN 875/1 indicate for this angle? DIN 875/1 denotes a high workshop precision class; the squaring stop 500 x 330 mm conforms to this standard and is suitable for routine inspection and layout work where tight right-angle references are required. How does the integrated stop improve workflow? The integrated stop on the squaring stop 500 x 330 mm provides a fixed datum that simplifies repeated positioning, reducing setup times and improving consistency across batches. Is the tool suitable for heavy-duty bench use? Yes, the normal steel construction and the 500 x 330 mm reference faces give the tool sufficient stiffness and mass for stable bench and table work in machine shops. Can this angle be used for both marking and inspection tasks? The design of the squaring stop 500 x 330 mm suits marking, alignment and visual inspection; the stable reference edges ensure reliable transfer of right-angle layouts to the workpiece. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ensure right angles every time with precision angle gauges
Angle measurement is decisive in metalworking, where even the smallest deviation from a 90° geometry can cause assembly errors or functional faults. The category covers both fixed verification tools and variable measuring instruments, presented here as angle gauges, with common synonyms control squares and sine bars used throughout.
Where and how these tools make the difference on the shop floor
For basic layout and rough alignment, the engineer’s square (a simple flat or bench square) serves as the workshop baseline; it is useful for marking and quick checks but not intended for precision components. When higher accuracy is required, control squares with hardened and lapped faces are used; they are produced in accuracy classes referenced by DIN 875 and designed for the light gap method, which reveals form errors by inspecting the gap between gauge and workpiece under illumination. In pipeline and vessel fabrication, the flange square provides a robust contact geometry to align flanged faces to pipe axes and to withstand high mechanical loading. For angles other than 90°, a sine bar enables trigonometrical determination by using end measures, achieving resolutions into the seconds of arc when set up correctly. Regular calibration and checks for wear and flatness of the legs are essential, since a rounded or damaged leg will distort results.
Practical advantages that reduce rework and speed production
- Reduced fitting errors through repeatable reference geometry using control squares.
- Clear detection of form errors with the light gap method (fast visual indication).
- Durable contact surfaces thanks to hardened and lapped faces, extending service life.
- Accurate non-90° measurement via sine bar setups, enabling fine angular adjustments.
- Stable alignment of flanged components with purpose-built flange squares, lowering assembly time.
Why Metav is the reliable partner for precision angle measurement
Metav stands for democratisation of precision. As an experienced precision partner, Metav combines decades of know-how with a comprehensive range for industry, craft and trade; over 48,000 customers trust this quality filter based in Emmerich. With a broad assortment and consistent supply, Metav simplifies procurement and ensures a dependable source for angle gauges, calibration accessories and workshop standards.
Quick summary
Accurate angle gauges — from basic engineer’s squares to high-precision control squares and sine bars — prevent costly fit problems and support reliable, repeatable manufacture. Choose tools matched to the required accuracy class and maintain them regularly to keep measurement integrity.
FAQ
What is the difference between an engineer’s square and a control square?
An engineer’s square is a workshop baseline for marking and rough checks, while a control square features hardened and lapped faces and is manufactured to tighter tolerances (per DIN 875) for inspection and detection of form errors.
How does the light gap method work for checking right angles?
The light gap method places the workpiece against a control square; uneven gaps visible under a light source indicate deviations from perpendicularity, providing an immediate visual assessment of form errors.
When should I use a sine bar instead of a fixed angle gauge?
Use a sine bar when you need precise angles other than 90°. By stacking end measures you set the desired angle trigonometrically, achieving much finer resolution than most fixed gauges allow.
How often should angle gauges be checked for wear?
Regular inspection of flatness and leg condition is mandatory; any rounding or damage to the legs can significantly falsify measurements, so schedule checks according to usage intensity and your quality control procedures.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com