Precision angle gauges for reliable right-angle control
Angle gauges and inspection squares provide dependable verification of right-angle geometry and ensure accurate alignment in metalworking assemblies. Used for tasks ranging from rough marking with a machinist's square to high-precision verification with hardened and lapped control angles, these tools prevent fitment errors and functional faults by detecting even minute deviations from 90° and other set angles. For heavy-duty applications such as flange alignment in piping and vessel fabrication, robust flange squares offer stable seating on curved surfaces, while sine bars and adjustable angle gauges enable trigonometrically exact measurements for non‑standard angles. Regular calibration and inspection of leg flatness and wear are essential to maintain measurement integrity.
75x75mm Hexagon Square 120° Without Stop, Steel DIN 875/2 - Metav IndustryLine
Take advantage of the combination of 120° geometry, DIN 875/2 compliance and a compact 75×75 mm footprint to standardise angle references across production and inspection tasks. Order the component directly via Metav Werkzeuge or consult the technical team for application advice. Hexagonal Angle 120° — Angle block, 75×75 mm, standard steel (Metav IndustryLine) A Hexagonal Angle 120° (75×75 mm) designed as a stable reference for layout, set-up and inspection tasks in metalworking and toolmaking. 120° hexagon geometry 75×75 mm working faces Manufactured to DIN 875/2 No stop for unobstructed contact Repeatable setups through defined geometry The 120° geometry of this angle block provides a precise reference for fixtures and assemblies where non‑right angles are required. Machined contact faces of 75×75 mm give a predictable support area, reducing play during clamping and enabling quicker alignment. Conformity with DIN 875/2 ensures dimensional tolerances compatible with workshop metrology routines, so layout work and inspection steps can be standardised across shifts and machines. The result is improved repeatability of set‑ups and a measurable reduction in alignment time. Robust construction for everyday workshop use Constructed from standard steel, the component balances stiffness with manageable weight (0.1 kg), making it easy to handle while retaining the rigidity needed for consistent readings. The absence of a stop (delivered without stop) simplifies contact geometry where an unobstructed edge is required for certain jigs or measuring arrangements. The hexagonal cross‑section is inherently stable under lateral loads; this produces reliable contact behaviour during manual positioning and when used within small assemblies. Designed to aid measurement and layout workflows As an angle reference, the block assists with internal and external layout tasks and can be integrated into inspection sequences as a repeatable datum. The simple geometry reduces interpretation for operators: once referenced, the angle block functions as a fixed standard for comparative checks. This piece is best described as an angle block for bench and fixture work rather than a gage requiring frequent recalibration; traceability is supported by the product’s adherence to recognised standards. Practical advantages and care recommendations Handling is straightforward: the compact footprint allows placement within crowded workspaces and the mass provides tactile feedback when seating the component. Routine care—wiping clean and protecting from prolonged exposure to moisture—preserves the contact faces. For long‑term accuracy, periodic inspection against a master gauge is advisable in busy production environments. The component’s compatibility with standard workshop procedures makes it a low‑complexity tool that supports faster cycle times and fewer setup iterations. For precise angular references from Metav IndustryLine, request the Hexagonal Angle 120° (M214.453) from Metav Werkzeuge — info@metav-werkzeuge.com or phone +49 2822 7131930 for further application guidance and delivery details Technical Data Article number: M214.453 GTIN: 4054469108865 Weight: 0.1 kg Facts Angle: 120° Working faces: 75×75 mm Tariff code: 90178090 Special features Material: standard steel Standard: DIN 875/2 Delivered without stop Category: Angle FAQ What is the primary application of this angle block? The Hexagonal Angle 120° serves as a stable reference for layout, fixture alignment and inspection tasks where a 120° datum is required; it is suitable for workshop and toolmaking environments. Is the component compliant with recognised standards? Yes; the product is manufactured to DIN 875/2, ensuring tolerances compatible with common metrology and inspection procedures. What material is used and how should it be cared for? Made from standard steel, the block should be kept clean and dry; regular inspection against a master is recommended to maintain long‑term reliability. Does the item include a stop or fixture mounting? This version is delivered without stop, offering unobstructed contact faces for flexible integration into jigs and measuring setups. Which identifier should be quoted when ordering? Please refer to the SKU/article number M214.453 and GTIN 4054469108865 when specifying the Hexagonal Angle 120° in procurement or inventory systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75x75mm Octagonal 135° Angle, Hardened Carbon Steel Without Stop, DIN 875/2 - Metav IndustryLine
Take advantage of the combination of 135° precision geometry and a compact 75 x 75 mm footprint in a robust mild steel construction for reliable alignment and repeatable set-ups on jigs and inspection benches. Order the octagonal 135° angle directly via Metav Werkzeuge or ask our consultants if needed. Octagonal Angle 135° – 75 x 75 mm (Mild Steel) by Metav IndustryLine The Octagonal Angle 135° is a compact alignment gauge designed to set and check 135° angles in metalworking, fixture assembly and quality inspection applications. 135° precision geometry Compact 75 x 75 mm footprint Robust mild steel construction Consistent alignment for quicker set-ups The octagonal profile delivers a stable reference for angled fixtures, enabling faster and more reliable alignment compared with improvised aids. Manufactured to the workshop standard DIN 875/2, the component provides precision suitable for routine inspection and assembly tasks. This standard indicates controlled geometric tolerances, meaning the angle is produced and checked to a defined accuracy class so that measurements and setups remain reproducible across multiple operations. Durable material suited to daily workshop use Made from mild steel, the gauge combines toughness with predictable mechanical behaviour under clamping and handling. The solid construction resists deformation during normal shop-floor use and ensures a consistent datum when used on inspection benches or during jig assembly. The design includes no stop, which increases versatility for positioning in confined spaces or when an unobstructed seating face is required for custom fixturing. Practical format for versatile applications With a compact footprint of 75 x 75 mm and an octagonal cross-section that offers multiple seating faces, the tool is easy to slot into fixtures, welding jigs or inspection layouts where access can be restricted. The compact format reduces obstruction around the workpiece while still delivering a clear angular reference. The accessible geometry supports tasks such as checking mating angles, aligning components for tack welding, or validating part set-up prior to machining. For workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge for personalised advice and reliable supply from Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.413 GTIN: 4054469108643 ECLASS: 21170119 Customs tariff number: 90178090 Dimensions & standards Angle: 135° Footprint: 75 x 75 mm Standard: DIN 875/2 Design & features Octagonal profile Without stop Material: Normalstahl (mild steel) Category: Angle gauge Brand: Metav IndustryLine FAQ What material is the angle made from? The octagonal 135° angle is manufactured from mild steel, offering robustness for everyday workshop tasks. Is this angle produced to a recognised standard? Yes, the tool is made to DIN 875/2, which defines the geometric tolerances for workshop squares and comparable angle gauges. How does the octagonal profile benefit use? The octagonal cross-section supplies multiple seating faces for flexible positioning and improved access when aligning fixtures or parts. Does the product include a stop or shoulder? This version is supplied without a stop, providing unobstructed seating faces for custom fixturing and use in confined spaces. Which industries or tasks is this angle suited to? The component is ideal for metalworking, jig and fixture assembly, inspection benches and preparatory set-ups prior to machining. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80 x 400 mm Angle Gauge Column 90° Accuracy 0.005 mm Ground Base And Circumference - Metav IndustryLine
The combination of 0.005 mm repeatability, hardened special steel construction and ground contact surfaces provides a robust basis for reproducible squaring and angle referencing in inspection and setup tasks. Order the 90° angle column directly via Metav Werkzeuge or consult the Metav team for tailored application advice. 90° Angle Column M214.623 — Hardened steel, 0.005 mm accuracy (Metav IndustryLine) A 90° Angle Column M214.623 designed for precise right‑angle referencing and inspection tasks in metrology benches and machine set‑ups. 0.005 mm accuracy for high-precision referencing Ground base and cylindrical surface for stable contact Hardened special steel construction for durability Precision that reduces rework and speeds set-up Built for objective measurement tasks, this angle column delivers a guaranteed 0.005 mm accuracy that supports tight tolerances in quality control. The finely ground base and outer surface create defined contact planes, so repeat measurements align closely without extensive fixturing. For process engineers and inspection technicians, the result is fewer trial adjustments and a more reliable reference when squaring components or checking perpendicularity on fixtures. Stable mass and finish for consistent results Constructed from hardened special steel and weighing 15 kg, the column offers inherent stability during handling and use; the mass dampens vibration and helps maintain contact during manual positioning. The 80 x 400 mm dimensions provide a practical working height and footprint for bench‑top inspection or integration into a fixture layout. Where repeatability matters, a rigid, well‑finished reference post reduces variability between operators and supports consistent documentation of results. Clear engineering advantages for workshop integration The ground stand face and mantle surface mean reliable mechanical contact with workpieces and clamping devices, improving alignment accuracy without complex adapters. Described tolerances translate directly into process confidence: a reliably square reference reduces downstream machining corrections and supports faster go/no‑go decisions at the inspection stage. The alloy and heat treatment ensure long service life under regular workshop use, while the familiar geometry makes the column easy to position alongside other metrology tools. Contact Metav Werkzeuge for an application check and to integrate the M214.623 into existing inspection routines; expert advice and delivery are available from Emmerich. Technical data Article number: M214.623 GTIN: 4054469183800 Brand: Metav IndustryLine Label: 90° angle column, 80 x 400 mm, accuracy 0.005 mm Core specifications Accuracy: 0.005 mm Dimensions: 80 x 400 mm Weight: 15 kg Special features Ground base and cylindrical surface Material: hardened special steel Right-angle 90° reference FAQ What level of precision can be expected from this angle column? The 90° Angle Column M214.623 (Metav IndustryLine) provides an accuracy of 0.005 mm, suitable for demanding inspection and setup tasks that require tight perpendicular references. Is the column suitable for bench-top inspection and fixture use? Yes, the M214.623 is designed with an 80 x 400 mm footprint and a ground stand face for stable bench‑top positioning and straightforward integration with fixtures. What does the hardened special steel mean for durability? Hardened special steel in the 90° Angle Column M214.623 increases wear resistance and maintains surface integrity under routine contact and clamping, extending service life in industrial environments. Does the M214.623 require special handling due to its weight? At 15 kg the column benefits from mass for stability; standard safe‑lifting practice is recommended when mounting or relocating the unit to avoid injury and to protect the ground surfaces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800 x 430 mm Carpenter's Square Flat Galvanised, Factory Standard - Metav IndustryLine
Benefit from a flat-galvanised, special-steel construction and clear 800 x 430 mm geometry for repeatable layout and alignment tasks; order the square directly via Metav Werkzeuge or consult our advisors if required. Metalworker's square M214.512, 800 x 430 mm — flat galvanised, special steel (Metav IndustryLine) The Metalworker's square M214.512 is a flat, galvanised precision angle designed for layout, marking and simple alignment tasks in metalworking and general workshop environments Flat, galvanised finish for corrosion resistance Special steel construction for rigidity 800 × 430 mm leg lengths for larger components Low weight of 2 kg for easy handling Durable geometry for repeatable layout work The long leg combination of 800 x 430 mm provides a generous reach while maintaining a stable squareness, so workshop staff can mark and check large components with confidence. Manufactured from special steel and finished flat galvanised, the tool resists surface corrosion and preserves the contact geometry over time. The rigid profile minimises twist and deflection, translating into consistent results across repeated measurements and scribing operations. Efficient handling and clear functional benefits A slim, flat design allows the angle to sit flush against plate edges and flat faces for faster scribing and reference marking. The modest 2 kg mass keeps the tool manageable for single-person use without compromising stiffness, improving throughput when multiple checks are required. Built to a Werksnorm factory standard, the unit is ready for daily workshop use and low-maintenance operation, reducing downtime associated with frequent replacements or surface wear. Practical choice for workshop reliability This angle combines straightforward functionality with serviceable durability: the galvanised surface provides corrosion resistance, the steel construction offers long-term rigidity, and the simple geometry supports a wide range of layout and alignment tasks. As a practical measuring and marking aid, the square is suited to metalworking shops, maintenance departments and prototyping benches that need a robust reference angle without extensive handling requirements. Choose the Metav IndustryLine metalworker's square when durable, repeatable squaring is required—contact Metav Werkzeuge in Emmerich for procurement advice and reliable supply Technical Data Article number: M214.512 GTIN: 4054469108995 SKU: M214.512 Material: Special steel, galvanised Finish: Flat galvanised Weight: 2 kg Facts Dimensions: 800 x 430 mm Category: Angle / measuring tool Tariff number: 90178090 Standard: Werksnorm Special features Flat design for flush contact Suitable for layout, marking and alignment Durable, corrosion-resistant surface Low-maintenance workshop tool FAQ What are the leg lengths of this square? The metalworker's square M214.512 has leg lengths of 800 × 430 mm, giving good reach for larger plates and assemblies. Is the surface protected against corrosion? Yes, the unit is flat galvanised, which provides corrosion resistance suitable for workshop environments. What material is the square made from? The angle is manufactured from special steel, chosen for stiffness and long-term dimensional stability. Is this tool suitable for precision layout on large components? The rigid construction and generous leg lengths make the M214.512 suitable for repeatable layout and alignment checks on larger components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800 x 800 mm Flange Square, Galvanised, Factory Standard - Metav IndustryLine
Combine the galvanised special steel construction with an 800 x 800 mm measuring face and a low weight of 2.9 kg for dependable flange alignment; order the flange square directly via Metav Werkzeuge or contact their consultants for application advice. Flange square M214.544 — 800 x 800 mm galvanised angle square (Metav IndustryLine) A flange square M214.544 for workshop inspection and alignment, designed as a robust angle square for positioning and checking large flange faces in general metalworking and assembly environments Robust galvanised special-steel construction Large 800 x 800 mm measuring faces Lightweight 2.9 kg for easy positioning Factory-standard accuracy for workshop use Precise alignment with a large measuring face The large 800 x 800 mm measuring faces provide an extended reference plane that accelerates setup and reduces repositioning during assembly and inspection. The expanded contact area improves stability compared with smaller squares, making the tool suited for aligning flanges and seating surfaces on housings and assemblies. Because the face is produced from special steel, the square resists twisting under normal handling, which supports reproducible angle checks and reduces rework in repetitive tasks. Durability that suits harsh workshop environments A galvanised surface finish protects the tool against corrosion where coolant, oil mist or humid storage might otherwise accelerate surface degradation. The combination of the zinc coating and the special steel base preserves flatness over time, ensuring the reference faces remain serviceable without frequent restoration. At 2.9 kg, the square balances mass for stability with portability for single‑person handling, enabling quicker inspection cycles on the shop floor while remaining robust enough for daily industrial use. Improves workflow and inspection efficiency The open, true‑angle geometry simplifies visual and mechanical checks: the square can be set against a flange face and used with straightedges, feeler gauges or dial indicators for rapid verification. Delivered without packaging, the product is ready for immediate integration into jigs or inspection benches. The clear, workshop‑oriented design reduces handling steps and supports leaner quality processes, contributing to faster throughput and fewer alignment errors. For specification checks or fitment guidance, Metav Werkzeuge’s specialists can provide application advice and confirm suitability for specific flange types and assemblies. Contact Metav Werkzeuge for availability and tailored advice on using the flange square in production; Metav Werkzeuge in Emmerich can advise on delivery times, compatibility with existing fixtures and best practices for workshop handling Technical data Article number: M214.544 GTIN: 4054469181530 Manufacturer: Metav IndustryLine Weight: 2.9 kg Material: Special steel, galvanised Dimensions: 800 x 800 mm Standard: Factory standard Core specifications Measuring faces: 800 x 800 mm Mass: 2.9 kg Category: Angle square (flange square) Features Galvanised finish Robust special-steel construction Delivered without packaging Intended for workshop inspection and alignment FAQ What applications is this angle square suited for? The flange square M214.544 by Metav IndustryLine is intended for flange alignment, seat checking and general angle inspection in metalworking and assembly tasks. Is the surface protected against corrosion? Yes, the galvanised finish provides corrosion resistance, helping to maintain the reference faces during normal workshop exposure. How heavy is the tool and how easy is it to handle? The tool weighs 2.9 kg, which balances stability and portability for single‑operator positioning and routine inspection tasks. Does the product arrive packaged? This flange square is supplied without packaging and is therefore ready for immediate use or integration into workshop fixtures. What accuracy or standard does the tool meet? The square is produced to the manufacturer's factory standard and is aimed at dependable workshop checks rather than certified laboratory measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm x 320mm Carpenter's Square 35x1.2mm Stainless Steel Seamless With mm Scale - Metav IndustryLine
Take advantage of a large, rigid layout surface and corrosion‑resistant seamless construction for consistent right‑angle checks and repetitive marking. The robust 35 x 1.2 mm cross‑section and engraved mm scale reduce setup time and measurement uncertainty in both carpentry and metalwork. Order via Metav Werkzeuge or consult our technical team for application advice and availability. Carpenter's square 800 x 320 mm (M214.912) — stainless seamless, engraved mm scale by Metav IndustryLine A carpenter's square 800 x 320 mm designed for fast, repeatable right‑angle verification and layout work across woodworking and workshop metal applications Stainless seamless construction for corrosion resistance Metric mm scale engraved for clear measurement Robust 35 x 1.2 mm cross-section for stiffness Large 800 x 320 mm layout surface for broad components Precise layout and faster workflow for repetitive tasks The combination of a large 800 x 320 mm blade and a sturdy 35 x 1.2 mm profile delivers visible time savings during repetitive marking and squaring operations. The engraved mm scale provides clear, permanent graduations that remain legible in heavy use, which supports traceable layout work and reduces re‑checks. Where repeated right‑angle verification is required—such as framing, panel fitting or jig setup—the clean edge and measured surface minimise cumulative error and support a more efficient production flow. Durable build that resists workshop conditions Manufactured from stainless steel, seamless throughout, the square is intended to withstand humid or dusty environments without surface corrosion or seam‑related weakness. The uninterrupted construction improves longevity and keeps straightness over time; the absence of scribe holes means a continuous, unbroken reference edge for marking and measuring. The relatively low mass (approx. 0.5 kg) paired with the rigid cross‑section offers a balance between portability and stability for everyday shop use. Practical handling and versatile applications This layout tool suits both joinery and general workshop settings: checking 90° angles, marking mitres, aligning large panels and transferring reference lines across components. The flat, smooth blade facilitates pencil and knife marking close to the true edge, while the pronounced profile aids firm seating against boards or plates during measurement. For tasks that demand a reliable, corrosion‑resistant reference—on site or in the workshop—the square provides a straightforward solution that prioritises repeatability and ease of use. For stock queries or tailored advice about the M214.912 carpenter's square, contact Metav Werkzeuge in Emmerich by phone or email to discuss suitability for specific applications and delivery options. Technical Data Article number: M214.912 GTIN: 4054469183411 Weight: 0.5 kg Dimensions: 800 x 320 mm Cross-section: 35 x 1.2 mm Facts Material: stainless steel, seamless Scale: engraved metric (mm) Category: Angle / Carpenter's square SKU: M214.912 Special features Without scribe holes Robust profile for reduced twist Suitable for carpentry and general workshop use FAQ What materials is this square suitable for? The M214.912 carpenter's square is made from stainless steel and is suitable for layout and angle checks on wood, panel materials and general metalwork where a corrosion‑resistant reference is required. How accurate is the engraved mm scale? The engraved mm scale on the M214.912 provides a durable visual reference for layout; for dimensional control beyond visual marking, standard workshop measuring instruments should be used in conjunction. Does the absence of scribe holes affect marking? The lack of scribe holes gives the M214.912 an uninterrupted reference edge, which improves the precision of pencil or knife marks along the blade and reduces interference when seating the square against workpieces. Is the square suitable for on-site use? Yes. The stainless, seamless construction and the moderate weight make the M214.912 appropriate for both workshop benches and on‑site layout tasks where corrosion resistance and portability are beneficial. Can the square be used for machine setup? The carpenter's square is intended for accurate right‑angle checks and layout; it supports machine setup tasks that require a reliable reference edge, though specialised machine‑level alignment tools may be needed for higher precision adjustments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800x320 Carpenter's Square Stainless Steel, Seamless, Powder-Coated, mm Scale & Marking Holes - Metav IndustryLine
Robust stainless steel construction, a clear millimetre scale with 5 mm scribe holes and a stiff 35 x 1.2 mm profile deliver repeatable layout and long service life; order the square directly via Metav Werkzeuge or ask our consultants for application support. Carpenter's square M214.932 — 800 x 320 mm, stainless, yellow powder-coated (Metav IndustryLine) Carpenter's square M214.932 is a right-angled layout tool for carpentry, joinery and site work, designed for precise marking and durable performance thanks to a millimetre scale and regularly spaced scribe holes. Seamless stainless steel construction Millimetre scale with 5 mm scribe holes Yellow powder-coated for corrosion resistance Stiff 35 x 1.2 mm profile for accurate edges Precision and durability for daily site use The seamless, stainless steel body and yellow powder-coated finish make this layout square resilient against workshop wear and corrosion while keeping a professional appearance. The profiled limb, specified as 35 x 1.2 mm, increases stiffness along the full length so that edges remain straight during repeated use; this reduces flex and ensures reproducible right angles over time. At roughly 0.5 kg, the tool balances rigidity with manageable handling on site. Fast, repeatable marking and measurement A clear millimetre scale combined with scribe holes every 5 mm turns routine layout tasks into quick, repeatable steps: lines can be transferred directly through the holes, eliminating guesswork and improving cycle time on repetitive cuts or joinery marks. The 800 x 320 mm format offers generous reach for framing and panel work while remaining compact enough for one-person handling, so layout and transfer operations become both more accurate and more efficient. A straight choice from a trusted supplier Produced under the Metav IndustryLine label, this right-angled tool delivers workshop-grade reliability for tradespeople and production shops. The M214.932 combines straightforward mechanics with pragmatic corrosion protection to reduce total cost of ownership. Metav’s European distribution and stock in Emmerich support dependable supply and practical aftersales guidance, making the square a sensible selection for routine site and workshop measuring tasks. Request tailored advice from Metav Werkzeuge for the M214.932 carpenter's square and secure delivery from our Emmerich warehouse—call or email our technical team for specification support Technical Data SKU: M214.932 GTIN: 4054469183497 ECLASS: 21170119 Facts Dimensions: 800 x 320 mm Cross-section: 35 x 1.2 mm Weight: 0.5 kg Special features Material: stainless steel, seamless, yellow powder-coated Millimetre scale Scribe holes every 5 mm Seamless construction FAQ What applications is this square best suited to? The M214.932 carpenter's square is designed for carpentry, joinery and general site layout tasks where a durable, easy-to-read right angle and repeatable marking are required. How do the scribe holes improve workflow? Scribe holes every 5 mm on the square allow direct line transfer and quicker marking, reducing setup time and improving consistency compared with freehand marking. Is the finish suitable for outdoor use? The yellow powder-coated surface provides an extra layer of corrosion resistance; combined with the stainless steel body, the tool is well suited to workshops and temporary outdoor use. Does the square offer sufficient stiffness for framing work? The 35 x 1.2 mm profile increases longitudinal stiffness, helping to maintain straight edges for reproducible 90° checks and layout tasks across the 800 mm limb. Which SKU should be ordered for this model? Order the M214.932 carpenter's square from Metav IndustryLine for the 800 x 320 mm, powder-coated stainless version. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800x320 mm Carpenter's Square With 35x1.2 mm Section, Stainless Steel, Perforated Every 5 mm, Metric Scale - Metav IndustryLine
Take advantage of the combination of seamless stainless steel construction, a precise millimetre scale and evenly spaced perforations for fast layout work — all in a robust 800 × 320 mm profile. Order this framing square directly via Metav Werkzeuge or contact our consultants for procurement advice. M214.922 Carpenter's framing square — 800 × 320 mm, seamless stainless, perforated 5 mm (Metav IndustryLine) A Carpenter's framing square M214.922 designed for durable layout and marking tasks in joinery, timber framing and general workshop use with an integrated mm scale and perforations every 5 mm Seamless stainless steel construction Perforated layout holes at 5 mm centres Integrated millimetre scale for precise marking Robust 35 × 1.2 mm cross-section profile Suitably sized 800 × 320 mm framing square Built for durable, repeatable layout and long service life The square is manufactured from seamless stainless steel, delivering corrosion resistance and consistent stiffness across the entire length. The 35 × 1.2 mm cross-sectional profile increases torsional rigidity, which reduces flex during transfer marking and ensures that right angles remain true under repeated use. As a direct benefit, less reworking is needed on site, improving throughput and lowering the risk of alignment errors on assemblies. Precise marking and rapid transfer between workpieces An integrated millimetre scale combined with perforated holes at 5 mm spacing streamlines repetitive layout tasks: holes act as guides for pencils, awls and punch marks, enabling fast, repeatable transfers without constant re‑measuring. The regular perforation grid supports both parallel marking and stepped layout operations, making the tool well suited to stair stringers, rafter layout and repeated joinery patterns where speed and consistency matter. Workshop-ready dimensions and practical handling With overall dimensions of 800 × 320 mm, the tool offers an extended reach for framing components while remaining manageable for single-person handling and storage. The square weighs approximately 0.5 kg, balancing portability with the necessary mass to lie flat during marking. The design simplifies procurement and inventory control: the tool is supplied under SKU M214.922 and carries a GTIN for catalogue ordering, so integration into purchasing systems is straightforward. For corrosion‑resistant durability and reliable layout performance choose the Metav IndustryLine M214.922 — contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.922 GTIN: 4054469183459 Weight: 0.5 kg Manufacturer: Metav IndustryLine Numbers / Core technical data Overall dimensions: 800 × 320 mm Cross-section: 35 × 1.2 mm Hole spacing: 5 mm centres Scale: millimetre graduation Designs / Special features Seamless stainless steel material Perforated layout holes every 5 mm Integrated mm scale for direct marking Suitable for carpentry and workshop layout FAQ What material is the framing square made from? The M214.922 is manufactured from seamless stainless steel, which gives corrosion resistance and long service life for workshop and on‑site use. How closely spaced are the perforations and what are they for? Perforations are spaced at 5 mm centres to serve as guides for pencil or awl marks, enabling fast, repeatable layout and transfer marking. Is the square suitable for heavy timber framing? Yes; the 800 × 320 mm format and the 35 × 1.2 mm profile provide the stiffness required for common framing and joinery tasks while remaining easy to handle. Can the tool be ordered through procurement systems? The Metav IndustryLine framing square is listed under SKU M214.922 and GTIN 4054469183459, facilitating catalogue ordering and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800x430 mm Engineer's Square With Stop, Galvanised Special Steel Werksnorm - Metav IndustryLine
Take advantage of a robust galvanised special-steel construction, an 800 x 430 mm measuring face and an integrated stop for repeatable layout work; this combination supports reliable, long-term workshop use. Order the square directly via Metav Werkzeuge or contact our consultants for application advice. M214.532 Fitter's Square (800 x 430 mm) – Galvanised with Stop by Metav IndustryLine A sturdy M214.532 fitter's square designed for heavy-duty layout, alignment and marking in metalworking and fabrication environments. Galvanised special-steel construction Large 800 x 430 mm measuring face Integrated stop for repeatable marking Workshop-standard build quality Precise layout and durable construction for repetitive tasks The square is built from galvanised special steel, offering corrosion resistance and a stable measuring face that withstands everyday workshop handling. The 800 x 430 mm format provides a generous reach for aligning plates, frames and larger components while keeping the tool manageable at 3.2 kg. The galvanised finish reduces surface corrosion, which helps maintain straightness and visual reference over time. For production settings where repeatability matters, this design reduces the need for re-adjustment and supports quicker set-up. Repeatable marking and faster workflow with an integrated stop An integrated stop enables consistent, repeatable marking and positioning without improvised jigs, which speeds up layout tasks and reduces human error. The stop simplifies tasks such as scribing multiple identical parts or squaring workpieces prior to welding and assembly. Together with the square’s rigid profile, the stop supports accurate right‑angle layout and contributes to a smoother workflow—especially useful when several identical operations must be completed in sequence. Practical features that suit workshop routines Designed to the maker’s internal standard, this square focuses on practical durability and ease of use. The item's workshop-standard construction tolerates routine bumps and knocks, while the chosen dimensions balance reach with user control. The product’s weight and proportions make it suitable for single-person handling across benches and machines, and the galvanised surface eases maintenance by resisting rust in demanding shop environments. Choose Metav IndustryLine's robust 800 x 430 mm fitter's square for dependable layout work—contact Metav Werkzeuge for technical advice and order details. Technical data Article number: M214.532 GTIN: 4054469109107 Commodity code: 90178090 Facts Dimensions: 800 x 430 mm Weight: 3.2 kg Standard: Werksnorm Special features Material: Spezialstahl, verzinkt Feature: mit Anschlag Category: Winkel FAQ What materials is this square suitable for? The M214.532 fitter's square from Metav IndustryLine is made of galvanised special steel and is suitable for general metalworking layout on steels and similar workshop materials. Does the galvanised finish prevent corrosion completely? The galvanised finish on the M214.532 provides improved corrosion resistance compared with raw steel, helping to preserve the reference surfaces under typical workshop conditions; regular cleaning and drying are still recommended. How does the integrated stop improve accuracy? The integrated stop on the square fixes workpieces consistently at the same datum, enabling repeatable scribing and alignment that reduces variation between identical parts. Is this square suitable for use at a welding bench? Yes, the robust construction and galvanised coating make the square appropriate for layout and alignment tasks commonly performed at welding benches and fabrication stations. Can the square be used for both inside and outside layout tasks? The profile and stop are optimised for external layout and edge alignment; internal referencing is possible depending on the geometry of the component and the operation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Schreinerwinkel mit Wasserwaage und Anschlag
Technische Daten: Hersteller: Metav IndustryLine Bezeichnung: Schreinerwinkel mit Wasserwaage und Anschlag Material: Aluminium Abmessung: 150x100 bis 600x180 Anschlag: 23x10 - 34x12 Besonderheit: mit mm-Skalierung Gewicht: 0,1 kg bis 0,4 kg Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Ensure right angles every time with precision angle gauges
Angle measurement is decisive in metalworking, where even the smallest deviation from a 90° geometry can cause assembly errors or functional faults. The category covers both fixed verification tools and variable measuring instruments, presented here as angle gauges, with common synonyms control squares and sine bars used throughout.
Where and how these tools make the difference on the shop floor
For basic layout and rough alignment, the engineer’s square (a simple flat or bench square) serves as the workshop baseline; it is useful for marking and quick checks but not intended for precision components. When higher accuracy is required, control squares with hardened and lapped faces are used; they are produced in accuracy classes referenced by DIN 875 and designed for the light gap method, which reveals form errors by inspecting the gap between gauge and workpiece under illumination. In pipeline and vessel fabrication, the flange square provides a robust contact geometry to align flanged faces to pipe axes and to withstand high mechanical loading. For angles other than 90°, a sine bar enables trigonometrical determination by using end measures, achieving resolutions into the seconds of arc when set up correctly. Regular calibration and checks for wear and flatness of the legs are essential, since a rounded or damaged leg will distort results.
Practical advantages that reduce rework and speed production
- Reduced fitting errors through repeatable reference geometry using control squares.
- Clear detection of form errors with the light gap method (fast visual indication).
- Durable contact surfaces thanks to hardened and lapped faces, extending service life.
- Accurate non-90° measurement via sine bar setups, enabling fine angular adjustments.
- Stable alignment of flanged components with purpose-built flange squares, lowering assembly time.
Why Metav is the reliable partner for precision angle measurement
Metav stands for democratisation of precision. As an experienced precision partner, Metav combines decades of know-how with a comprehensive range for industry, craft and trade; over 48,000 customers trust this quality filter based in Emmerich. With a broad assortment and consistent supply, Metav simplifies procurement and ensures a dependable source for angle gauges, calibration accessories and workshop standards.
Quick summary
Accurate angle gauges — from basic engineer’s squares to high-precision control squares and sine bars — prevent costly fit problems and support reliable, repeatable manufacture. Choose tools matched to the required accuracy class and maintain them regularly to keep measurement integrity.
FAQ
What is the difference between an engineer’s square and a control square?
An engineer’s square is a workshop baseline for marking and rough checks, while a control square features hardened and lapped faces and is manufactured to tighter tolerances (per DIN 875) for inspection and detection of form errors.
How does the light gap method work for checking right angles?
The light gap method places the workpiece against a control square; uneven gaps visible under a light source indicate deviations from perpendicularity, providing an immediate visual assessment of form errors.
When should I use a sine bar instead of a fixed angle gauge?
Use a sine bar when you need precise angles other than 90°. By stacking end measures you set the desired angle trigonometrically, achieving much finer resolution than most fixed gauges allow.
How often should angle gauges be checked for wear?
Regular inspection of flatness and leg condition is mandatory; any rounding or damage to the legs can significantly falsify measurements, so schedule checks according to usage intensity and your quality control procedures.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com