Precision angle gauges for reliable right-angle control
Angle gauges and inspection squares provide dependable verification of right-angle geometry and ensure accurate alignment in metalworking assemblies. Used for tasks ranging from rough marking with a machinist's square to high-precision verification with hardened and lapped control angles, these tools prevent fitment errors and functional faults by detecting even minute deviations from 90° and other set angles. For heavy-duty applications such as flange alignment in piping and vessel fabrication, robust flange squares offer stable seating on curved surfaces, while sine bars and adjustable angle gauges enable trigonometrically exact measurements for non‑standard angles. Regular calibration and inspection of leg flatness and wear are essential to maintain measurement integrity.
50x40 mm Angle Stop With Stop Plate, Hardened Stainless Steel, DIN 875/1 - Metav IndustryLine
Take advantage of the combination of DIN 875/1 accuracy, hardened stainless steel construction and a compact 50×40 mm footprint for precise, repeatable squaring and fixture set-up. Order the angle stop directly via Metav Werkzeuge or contact the consultants for application advice. Precision Angle Stop 50×40 mm (DIN 875/1) by Metav IndustryLine — hardened stainless steel, with stop Precision Angle Stop 50×40 mm (DIN 875/1) is a compact right‑angle inspection square designed for accurate reference and repeatable positioning in assembly and inspection tasks DIN 875/1 accuracy class Hardened stainless steel construction Compact 50×40 mm footprint Integrated stop for repeatable positioning Reliable reference for quick set‑up and alignment The compact format provides a stable, low‑profile reference that speeds up routine alignment work. Made from hardened stainless steel, the component resists corrosion and keeps its squareness during regular handling; this increases uptime because adjustments and corrections are minimised. The combination of a small footprint and rigid construction makes the tool especially suitable where space is limited but consistent angular accuracy is required, such as in jigs, small assemblies and bench inspection stations. Accuracy and repeatability for workshop and inspection use Certified to DIN 875/1, the square supplies a documented tolerance class that simplifies quality control decisions and process documentation. The visible right‑angle faces and the integrated stop allow repeatable placement against workpieces or fixtures, reducing setup time and human variation. By offering a defined geometric reference, the tool supports efficient alignment workflows and helps maintain traceable inspection routines without over‑engineering the solution. Practical design for everyday industrial handling With its straightforward geometry and robust finish, the angle stop is easy to seat against machined faces or assembly fixtures. The tool is intended as a practical workshop companion rather than an ornate precision instrument — its compact dimensions and corrosion‑resistant material make it a durable choice for daily use. For buyers seeking a dependable reference square that combines standardised accuracy with long‑term reliability, this item represents a pragmatic balance between performance and operational simplicity. Contact Metav Werkzeuge today to confirm suitability for specific applications or to request further technical details on the Metav IndustryLine Precision Angle Stop M214.332 Technical Data Article number: M214.332 GTIN: 4054469108162 eClass: 21170119 Customs tariff number: 90178090 Facts Dimensions: 50×40 mm Accuracy standard: DIN 875/1 Special features Material: hardened stainless steel With stop Category: Angle / square Brand: Metav IndustryLine FAQ What is the declared accuracy of this angle stop? The angle stop is supplied to the DIN 875/1 accuracy class, providing a standardised tolerance for inspection and workshop use. Can the angle stop be used for repeatable fixture positioning? Yes, the integrated stop and rigid construction of the Metav IndustryLine angle stop enable repeatable positioning for quick setups and consistent alignment. What material is the tool made from and why does it matter? The tool is manufactured from hardened stainless steel, which gives corrosion resistance and long‑term dimensional stability for workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50x40 mm Angle Stop With Stop, Hardened Stainless Steel, DIN 875/0, Cardboard Box - Metav IndustryLine
Made for precise squaring in confined setups, the combination of DIN 875/0 accuracy and hardened stainless steel ensures consistent alignment and long service life; the compact 50 x 40 mm footprint simplifies fixture work. Order the tool directly via Metav Werkzeuge or consult the team for specification advice. Stop Angle 50 x 40 mm, DIN 875/0 — hardened stainless precision square (Metav IndustryLine) The Stop Angle 50 x 40 mm is a compact, hardened stainless precision square designed for workshop squaring, fixture set-up and quality-control applications. DIN 875/0 accuracy class Hardened stainless steel construction Compact 50 x 40 mm footprint Consistent accuracy for everyday quality control Built to the DIN 875/0 standard, this compact square delivers a level of precision expected in general machine‑shop quality checks and fixture alignment. The class 0 designation indicates a high degree of squareness within the standard’s tolerances, making the gauge suitable where repeatability and measurable right angles matter. The device’s hardened edges preserve the reference surfaces, so readings remain reliable over repeated use. Robust, corrosion-resistant build for long service life The tool’s hardened stainless steel body combines wear resistance with corrosion‑resistant performance, reducing maintenance and ensuring dimensional integrity in humid or oily environments. Its solid construction keeps deformation minimal under normal workshop handling, so the square remains a dependable reference for setting up jigs, checking part faces and verifying component alignment. Supplied in a simple cardboard box, the item is ready for safe transport and immediate use. Space-saving design that supports reproducible set-ups With a 50 x 40 mm profile and a low weight of 0.1 kg, this stop angle is made for tight fixtures and confined measuring stations where larger squares would obstruct access. The integrated stop feature facilitates secure positioning against workpieces, improving repeatability when multiple parts require the same datum. Its compact format also makes it an effective tool for assembly benches and small-series production where quick, accurate squaring is needed. Contact Metav Werkzeuge today to discuss the Metav IndustryLine stop angle M214.312 for your application or to arrange delivery and specification support Technical data Article number: M214.312 GTIN: 4054469108001 Tariff number: 90178090 Facts Dimensions: 50 x 40 mm Weight: 0.1 kg Standard: DIN 875/0 Special features Material: hardened stainless steel Supplied in cardboard box Feature: with stop FAQ What level of accuracy does this square provide? The stop angle conforms to DIN 875/0, delivering the high squareness tolerances associated with class 0 for reliable alignment and quality checks. Is the tool suitable for use in humid or oily environments? Yes; the hardened stainless steel construction gives corrosion resistance, making the angle appropriate for typical workshop and production environments. Can the angle be used for fixture set-up and repeated positioning? The compact design and integrated stop enable reproducible positioning, so the gauge is well suited to fixture set‑up and repeat inspections. What is the size and weight of the tool for bench use? The device measures 50 x 40 mm and weighs 0.1 kg, providing a small footprint for confined workspaces and easy handling. Which SKU identifies this product? This precision stop angle is listed as M214.312 in the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50x40 mm Gauge Square, Flat, Stainless Hardened, DIN 875/0 - Metav IndustryLine
Take advantage of the combination of DIN 875/0 accuracy and a hardened stainless steel construction for a dependable right-angle reference in production and inspection. Order the inspection square directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. Inspection square 50 x 40 mm (DIN 875/0) — precision inspection square, hardened stainless steel (Metav IndustryLine) The Inspection square 50 x 40 mm (DIN 875/0) is a compact, flat right-angle reference for workshop and quality-control tasks, designed to provide a stable datum for set-ups, jig inspection and quick squareness checks. DIN 875/0 accuracy grade Hardened stainless steel construction Compact 50 x 40 mm format Flat design for precise surface contact Reliable right-angle reference that speeds up set-ups A precision right-angle reference removes guesswork from fixture set-up and machine alignment. Built to DIN 875/0, this square delivers a guaranteed tolerance class that simplifies acceptance criteria in inspection plans and reduces rework. The measured geometry offers a stable datum that helps to maintain machine set-up times and improves repeatability when checking perpendicularity on assemblies. Durable material for long service life and low maintenance Made from hardened stainless steel, the tool resists wear and environmental influences while keeping its measuring edges intact. The material choice combines corrosion resistance with mechanical strength, which means fewer replacements and reduced lifecycle costs for quality equipment. The result is a robust gauge that continues to perform under workshop conditions and frequent handling. Compact format for versatile use across the workshop The 50 x 40 mm footprint is intentionally compact, making this square easy to position on small components, inside fixtures or against gauge blocks. The flat profile ensures intimate contact with mating surfaces, enabling precise transfer of right angles even in confined spaces. This size balances reach and stiffness, offering a practical tool for everyday inspection tasks. Clear standards and traceability for quality assurance Conformance to DIN 875/0 brings clarity to quality documentation and inspection routines; the standardised accuracy grade supports consistent decision-making across production and quality teams. Where traceability is required, the square’s specification can be referenced directly in control plans, helping to align shop-floor practices with audit requirements and internal measurement procedures. Practical handling and workshop integration The flat, uncomplicated geometry ensures quick tactile checks without complex fixturing. The compact right-angle reference integrates cleanly into existing inspection benches, toolboxes or portable sets for on-the-spot verification. With a corrosion-resistant finish and hardened edges, it remains a reliable tactile instrument for machinists, fitters and quality inspectors alike. For tailored advice on how the Metav IndustryLine inspection square can be integrated into existing inspection routines, contact Metav Werkzeuge for application support and delivery from Emmerich. Technical data Article number: M214.302 GTIN: 4054469107936 Eclass: 21170119 Tariff number: 90178090 Standard: DIN 875/0 Facts Dimensions: 50 x 40 mm Special features Material: stainless steel, hardened Flat design for direct surface contact Category path: Measurement devices > Angles Compact precision inspection square FAQ What level of accuracy does this square provide? The square is manufactured to DIN 875/0, offering the highest standardised accuracy for inspection squares and enabling reliable right-angle checks in quality workflows. Is the square suitable for use in production and inspection areas? Yes, the hardened stainless steel construction and compact format make it suitable for routine use in both production set-ups and quality-control benches. Can this tool be used for checking jigs and fixtures? The compact 50 x 40 mm format and flat contact faces make the square well suited to verifying squareness on jigs, fixtures and small assemblies. How should the square be stored to preserve accuracy? Keep the square clean and dry, store it in a protective compartment within a toolbox or inspection case, and avoid impact to the measuring edges to maintain the DIN 875/0 geometry. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50x40 mm Hair Square Grade 00, Black Oxide Hairline Edges, DIN 875/00 — Metav IndustryLine
Take advantage of Class 00 accuracy together with a hardened, black‑blued hairline measuring edge in a compact 50 × 40 mm format; the result is repeatable inspection and secure set‑up of small components. Order directly via Metav Werkzeuge or ask our consultants for specification support. Hairline square 50 × 40 mm — precision angle gauge, DIN 875/00 (Metav IndustryLine) A compact hairline square 50 × 40 mm designed for fine workshop inspection and small‑part layout tasks; manufactured to meet DIN 875/00 for repeatable angle checks and alignment. Class 00 accuracy to DIN 875 Hardened, black‑blued hairline measuring edge Compact 50 × 40 mm for fine components Repeatable inspection with certified accuracy The square delivers industrially relevant accuracy by conforming to DIN 875/00, offering a defined tolerance level suitable for precision inspection tasks. The Class 00 rating reduces uncertainty when setting up jigs or checking small assemblies, which shortens inspection loops and lowers scrap rates. The compact footprint maintains stiffness where it matters, enabling fast, reproducible measurements without the handling complexity of larger gauges. This focus on measurable performance supports efficient quality routines in small‑bore production and assembly work. Robust construction for everyday workshop use Constructed from tool steel with a hardened, black‑blued hairline measuring edge, the instrument resists wear while providing a clearly visible reference line for optical comparison. The hardened edge ensures long service life under regular contact with metal surfaces, while the black‑blued finish suppresses glare and helps the hairline stand out against bright stock. These material choices translate into lower life‑cycle costs and fewer replacements, making the tool a reliable complement to bench‑level inspection equipment. Practical benefits and typical applications Compact geometry and high accuracy make the gauge well suited to layout work, final inspection of small housings, and alignment tasks where space is constrained. The precise reference edge supports both visual alignment and tactile checking with feeler gauges or optical aids. For workshops seeking a straightforward, high‑precision angle reference, this tool combines hardness, stability and standard conformity to deliver predictable results in everyday metrology. Contact Metav Werkzeuge to confirm fitment for specific inspection tasks and to request item M214.132 from the Metav IndustryLine range — specialists are available to advise on tolerance requirements and integration into existing quality routines. Technical data Article number: M214.132 GTIN: 4054469106779 Dimensions: 50 × 40 mm Material: tool steel with hardened and black‑blued hairline measuring edge Standard: DIN 875/00 eClass: 21170127 Tariff number: 90178090 Core technical values Accuracy class: 00 (DIN 875) Measurement format: 50 × 40 mm GTIN: 4054469106779 Tariff number: 90178090 Special features Hardened measuring edge for wear resistance Black‑blued surface to reduce glare Tool steel construction for stiffness and durability Conforms to DIN 875/00 for traceable tolerances Compact format optimised for small components FAQ What tolerance level does this square meet? The hairline square is manufactured to DIN 875/00 and specified as Class 00, providing the tight tolerance band expected for high‑precision bench measurements; item M214.132 from Metav IndustryLine fulfils this standard. Can the square be used for optical alignment tasks? Yes, the hardened, black‑blued hairline measuring edge gives a clear visual reference suitable for optical comparison and layout work in fine machining and inspection. Is this instrument suitable for daily workshop use? The tool steel construction and hardened measuring edge ensure durability for routine use; Metav IndustryLine designed the gauge for frequent handling in production and assembly environments. Which brand and SKU should be ordered for this gauge? Order the Metav IndustryLine hairline square, SKU M214.132, to obtain the exact specification and conformity to DIN 875/00. Does the square require special maintenance to retain accuracy? Basic care—keeping the measuring edge clean and protected from knocks—maintains accuracy; the hardened edge reduces wear, lowering the need for frequent recalibration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50x40 mm Hairline Square With Stop, Stainless Hardened Measuring Edge, DIN 875/00, Supplied In Case - Metav IndustryLine
Take advantage of precision, a hardened measuring edge and a compact stainless construction for repeatable right‑angle checks; order directly via Metav Werkzeuge or contact our consultants for availability and technical advice. Precision Engineer's Square 50 x 40 mm with Stop (DIN 875, Class 00) — Metav IndustryLine The Precision Engineer's Square 50 x 40 mm with stop is a compact stainless reference square designed for exact right‑angle verification and workshop inspection tasks DIN 875 Class 00 accuracy Hardened measuring edge, matt chrome finish Integrated stop for repeatable positioning Compact 50 x 40 mm stainless construction Reliable, standardised accuracy for routine inspection This compact square delivers DIN 875 Class 00 accuracy, making it suitable where exact right‑angle references are required in assembly and inspection workflows. The tool was conceived for repeated checks on fixtures, machined faces and small assemblies; its 50 x 40 mm blade and body geometry keep deflection low and contact conditions stable. By combining a hardened measuring edge with a matt chrome surface finish, the gauge resists wear while providing a clear visual contrast at the contact line. The result is a dependable standard that reduces rework and supports consistent production quality. Durable stainless construction and a hardened measuring edge Constructed from stainless steel with a matt chrome plating and a hardened measuring edge, the square stands up to shop floor conditions without compromising metrological stability. The hardened edge maintains geometry under frequent use, while the corrosion‑resistant base material ensures longevity in humid or coolant‑exposed environments. This combination reduces maintenance needs and ensures the reference remains true over time, supporting efficient inspection routines and fewer calibration interventions. Integrated stop for faster, repeatable positioning An integrated stop simplifies repetitive tasks by providing a fixed datum for quick, reproducible set‑ups. The mechanical stop shortens cycle times in serial checks and positioning operations, improving throughput without sacrificing accuracy. For tasks that require consistent spacing or indexing, this feature minimises handling variation and helps maintain measurement uniformity across parts batches. Practical applications and workshop integration Ideal for metalworking, toolrooms and quality control benches, this compact square serves as a portable reference for checking squareness on small housings, fixtures and mounting faces. The balanced proportions of the gauge make one‑handed checks straightforward while retaining the stiffness needed for reliable measurement. Where space is constrained and precision is required, the instrument supports both rapid go/no‑go assessments and measured verification tasks that feed into documented quality processes. Request availability of the Metav IndustryLine precision square and consult Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M214.102 GTIN: 4054469106601 ECLASS: 21170127 Customs tariff code: 90178090 Standard: DIN 875 Class 00 Material: stainless steel, matt chrome with hardened measuring edge Dimensions: 50 x 40 mm Weight: 0.1 kg Facts Size (mm): 50 x 40 Weight (kg): 0.1 GTIN: 4054469106601 Tariff number: 90178090 Special features Integrated stop for repeatable positioning Hardened measuring edge for wear resistance Matt chrome finish for corrosion protection DIN 875 Class 00 precision FAQ What level of accuracy does this square provide? The precision square is manufactured to DIN 875 Class 00, offering a high level of right‑angle accuracy suitable for precision inspection tasks. Which materials is the square made from? This Metav IndustryLine square is made from stainless steel with a matt chrome finish and a hardened measuring edge to resist wear. What are the physical dimensions and weight? The gauge measures 50 x 40 mm and weighs approximately 0.1 kg, making it compact and easy to handle for small assemblies. Is the integrated stop suitable for repetitive positioning? Yes, the built‑in stop enables repeatable positioning for serial checks and quick go/no‑go set‑ups on production or inspection benches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50x40 mm Inspection Square Flat, Hardened Stainless Steel, DIN 875/1 - Metav IndustryLine
Reliable right‑angle checks with a hardened stainless steel body and DIN 875/1 conformity ensure consistent, reproducible measurements; the compact 50 x 40 mm flat profile combines accuracy with easy handling. Order the control square directly via Metav Werkzeuge or ask our consultants if needed. Control square M214.322 — Hardened stainless steel inspection square, DIN 875/1, 50 x 40 mm The Control square M214.322 is a compact inspection square designed for precise right‑angle verification in workshop, jigging and quality‑control environments. Hardened stainless steel construction Conforms to DIN 875/1 Flat profile for full‑face contact Compact 50 x 40 mm footprint Compact robustness for repeatable right‑angle checks Constructed from hardened stainless steel, the inspection square delivers corrosion resistance and long‑term wear performance that support repeatable right‑angle checks. Its flat profile provides a full contact surface, reducing the risk of point contact and improving reproducibility when comparing workpieces or setting up fixtures. The 50 x 40 mm footprint keeps the gauge manageable for tight spaces while maintaining sufficient rigidity for small assemblies and routine inspection tasks. Standards compliance that strengthens quality procedures Manufactured to DIN 875/1, the tool aligns with established metrology requirements used in machining and inspection workflows. Conformity to this standard simplifies documentation and helps maintain consistent acceptance criteria across batches and operators. Traceable standards compliance supports rational decision‑making during incoming inspection and in‑process checks, reducing rework and improving throughput in quality‑conscious production environments. Practical handling and workshop durability The control square’s compact dimensions and low profile make it easy to position against edges, faces and fixtures without obstructing access. The hardened stainless steel material minimises surface damage from everyday use, so the square remains serviceable over long periods with minimal maintenance. Its straightforward geometry assists rapid visual verification and tactile confirmation of squareness during setup—an efficient complement to digital metrology in the inspection chain. Choose the Metav IndustryLine control square for robust, standards‑based right‑angle inspection and contact Metav Werkzeuge for personalised advice or to place an order. Technical data SKU: M214.322 GTIN: 4054469108070 Tariff code: 90178090 Core measurements Dimensions: 50 x 40 mm ECLASS: 21170119 Special features Material: Hardened stainless steel Standard: DIN 875/1 Design: Flat profile Category: Inspection square Brand: Metav IndustryLine FAQ What material is used for this inspection square and why is it suitable? The Control square M214.322 is manufactured from hardened stainless steel, which offers corrosion resistance and surface hardness that preserve squareness and ensure long service life in workshop conditions. Is this square suitable for precision inspection in a production environment? Yes; the Metav IndustryLine control square M214.322 meets DIN 875/1 and is intended for routine right‑angle verification during production and assembly checks. Which standard does the tool comply with and what does that mean in practice? Compliance with DIN 875/1 means the control square follows recognised metrology tolerances and manufacturing practices, simplifying acceptance criteria and supporting consistent quality control procedures. How do the dimensions affect usability for small parts and fixtures? The compact 50 x 40 mm format provides a stable contact area while remaining manoeuvrable around small parts and in constrained setups, making it practical for jigging, fixture checks and small‑batch inspection. Can the square withstand daily workshop use without special care? The hardened stainless steel construction of the Control square M214.322 resists wear and surface corrosion; routine cleaning and safe storage preserve measurement integrity over time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50x40mm Hair Square Angle Gauge 14x4.5mm Legs - TECWERK
Take advantage of the combination of DIN 875/00 accuracy, compact leg dimensions and a solid 14 x 4.5 mm cross‑section for reliable right‑angle checks in confined workspaces; order directly via Metav Werkzeuge or request consultancy for application advice. TECWERK Engineer's Square DIN 875/00 – Legs 50 x 40 mm, cross‑section 14 x 4.5 mm A TECWERK engineer's square designed for precise right‑angle verification in metalworking and general workshop layout. DIN 875/00 accuracy class Legs 50 x 40 mm for compact setups 14 x 4.5 mm solid cross‑section Robust construction for daily workshop use Faster, repeatable right‑angle checks for production and repair Manufactured to the DIN 875/00 standard, this square offers a predictable baseline for dimensional inspection and assembly tasks. The declared accuracy class ensures measurement repeatability, which reduces rework and shortens inspection times on jigs and manufactured parts. Using a calibrated reference such as this precision square simplifies routine checks: place the blade against the datum and read alignment by eye or with a feeler gauge. The result is consistent geometry control during setup and throughout serial work. Compact form that improves handling and fixture access The compact 50 x 40 mm leg format and 14 x 4.5 mm cross‑section deliver stability where space is limited. The short leg length makes the tool suitable for confined fixtures, small workpieces and rapid transfers between benches. A solid cross‑section reduces twist under light pressure, helping to maintain a clear, unchanged reference during repetitive verifications. This combination of dimensions supports quick, ergonomic operation without the need for larger metrology equipment. Practical shop supply and trustworthy sourcing for everyday use Supplied as a single unit, this square is straightforward to stock and assign to a workstation. Procurement from Metav puts this measurement tool in the context of a broader precision offering: Metav’s Emmerich site acts as a quality filter for the European market, combining wide availability with specialist advice. If additional specification or verification data is required for integration into quality control routines, technical clarification is available via Metav’s sales team. For dependable right‑angle checks with compact handling, request the TECWERK engineer's square (SKU 2000858385NW) through Metav Werkzeuge for delivery from Emmerich or contact their consultants for tailored application support Technical Data SKU: 2000858385NW Item: Haarwinkel DIN 875/00 Schenkel-L.50x40mm TECWERK Product type: Haarwinkel Manufacturer: TECWERK Packaging unit: 1 Facts Legs (L x H): 50 x 40 mm Cross‑section: 14 x 4.5 mm UID: 2000858385NW Special features Standard: DIN 875/00 Compact format for confined fixtures Single unit supply FAQ What level of accuracy does this square provide? The square is manufactured to the DIN 875/00 standard; the TECWERK engineer's square therefore meets that declared accuracy class for right‑angle verification. Is the tool suitable for workbench metalworking tasks? Yes, the compact leg dimensions and solid cross‑section make the TECWERK engineer's square suitable for typical bench tasks and small‑part inspection. How does the 14 x 4.5 mm cross‑section affect performance? A 14 x 4.5 mm cross‑section increases rigidity and reduces torsion during handling, helping to keep the reference edge stable during repeated checks. Can this square be used in confined or fixtured setups? The 50 x 40 mm leg size is intentionally compact to improve access in tight fixtures and confined setups where larger squares would be impractical. What is included in the delivery? The product is supplied as a single unit (packaging unit 1) and listed under SKU 2000858385NW Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
50x50mm Eight-Sided 135° Angle, No Stop, Steel, DIN 875/2 - Metav IndustryLine
Compact, standard-compliant and robust: benefit from the combination of 50 x 50 mm measuring faces, a 135° geometry and DIN 875/2 conformity for reliable angle checks in workshop metrology. Order the octagonal 135° angle directly via Metav Werkzeuge or consult our advisors for application support. Octagonal 135° Angle M214.412 – 50 x 50 mm, mild steel, DIN 875/2 The Octagonal 135° Angle M214.412 is a compact metrology tool for checking obtuse joints and setting out in workshop measurement tasks DIN 875/2 precision Octagonal section for stable handling Compact 50 x 50 mm measuring faces No stop for unobstructed measuring Reliable precision for obtuse-angle inspection The M214.412 is made to perform consistent checks on 135° interfaces, meeting the requirements of DIN 875/2 for normative square geometry. The standard ensures that the tool provides repeatable reference surfaces for verification and set-up tasks in workshop environments. With clearly defined measuring faces and a geometry tailored to obtuse-angle inspection, the instrument reduces setup time and helps maintain process reliability during routine quality checks. Robust form and easy handling in everyday use An octagonal profile combines tactile stability with compact dimensions, enabling precise placement without excessive bulk. The body is manufactured from mild steel, giving sufficient rigidity for workshop use while remaining easy to handle. The version supplied without stop permits unobstructed alignment and makes the tool suitable for transitional checks and block measurements where a stop would restrict positioning. Fewer mechanical constraints allow quicker orientation and fewer positional errors. Practical applications and added value for the workshop This measuring angle is aimed at metalworkers, toolrooms and assembly shops that require a compact reference for inspection, layout and set-up work. The 50 x 50 mm faces provide a good balance between reach and stiffness, ideal for small to medium assemblies and daily inspection tasks. Using a standard-compliant angle simplifies documentation of inspection routines and supports traceable measurement procedures, contributing to reproducible outcomes on production and maintenance jobs. For specification advice or to confirm suitability for a particular application, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will advise on integration into existing measurement routines Technical data SKU: M214.412 GTIN: 4054469108636 Norm: DIN 875/2 ECLASS: 21170119 Numbers / Core data Dimensions: 50 x 50 mm Angle: 135° Tariff number: 90178090 Special features Material: mild steel Octagonal cross-section Supplied without stop Category: measuring angle (Winkel) FAQ What tolerance class does this angle comply with? The octagonal 135° angle M214.412 conforms to DIN 875/2, which defines the geometric accuracy expected of workshop squares and ensures repeatable angular reference for inspection tasks. Which material is used for the measuring faces? The measuring faces of the M214.412 are formed from mild steel, providing a robust contact surface suitable for general workshop use and everyday inspection. Is the tool suitable for layout work on assemblies and fixtures? Yes. The compact 50 x 50 mm faces and the unobstructed design make the M214.412 well suited to layout, set-up and verification of small to medium assemblies in toolrooms and production cells. How should the angle be stored and maintained? Keep the angle clean and dry; a light coating of rust preventive is recommended if stored in humid environments. Avoid dropping or striking the faces to preserve accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50x50mm Hexagon Angle 120° Without Stop, DIN 875/2 - Metav IndustryLine
Take advantage of the combination of precise 120° alignment, robust mild steel construction and a compact 50×50 mm footprint for dependable workshop inspection and rapid set-up. Order directly via Metav Werkzeuge or consult the team for application advice. M214.452 — 120° Hexagonal Angle Gauge, 50×50 mm (Mild steel) by Metav IndustryLine M214.452 is a compact 120° angle gauge for quick alignment and inspection tasks in machine shops and quality control environments 120° angle for precise alignment Compact 50×50 mm footprint Mild steel construction, robust finish Conforms to DIN 875/2 standard Precision that reduces rework and speeds inspection The 120° geometry is manufactured to the tolerances of DIN 875/2, providing a reproducible reference for alignment and go/no-go checks. As a small-format angle gauge, it offers a stable datum for set-up work where larger squares are impractical. The combination of defined angle accuracy and a compact outline helps to shorten inspection loops and to lower the likelihood of adjustment errors during assembly or machining. Robust design for everyday workshop demands Constructed from mild steel, the tool balances toughness with machinability to withstand routine handling without brittle failure. The 50×50 mm cross section gives a reassuring feel in the hand while remaining easy to position in tight fixtures. The version supplied is without stop, leaving the faces free for custom fixturing or bench-mounted set-ups and thereby increasing flexibility in jigs and fixtures. Integrates into inspection routines and set-up workflows As a lightweight, repeatable reference, the gauge supports tasks such as alignment checks, fixture validation and simple comparative measurements. The compact format eases storage on inspection benches and permits rapid transfer between stations. Use of a standardised angle reference shortens set-up times and supports traceable quality processes that feed directly into more efficient production cycles. For precision alignment and reliable workshop checks, request technical guidance or secure supply from Metav Werkzeuge — direct assistance and product sourcing from Emmerich are available for professional users. Technical Data Article number: M214.452 GTIN: 4054469108858 Eclass: 21170119 Facts Angle: 120° Dimensions: 50×50 mm Tariff code: 90178090 Special features Material: mild steel Conforms to DIN 875/2 Version without stop Category: Angle (Winkel) Brand: Metav IndustryLine FAQ What is the primary application for this angle gauge? The M214.452 is intended as a compact reference for alignment and quick inspection tasks in machine shops and quality control benches. Is the 120° angle traceable to a recognised standard? Yes, the geometry of the gauge complies with DIN 875/2, offering a standardised tolerance class for routine inspection use. Can the gauge be mounted in jigs or fixtures? The version without stop allows flexible fixturing; custom mounting or bench clamps can be used to secure the gauge during repetitive checks. What material is used for the gauge and what does that mean for durability? Made from mild steel, the tool provides robust everyday durability while remaining suitable for workshop handling and occasional light knocks. Is this angle suitable for precision laboratory measurement? The 120° reference is intended for workshop and quality-control inspection rather than sub-micron laboratory work; it is best used where ruggedness and repeatable alignment are priorities. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
520mm 270° Angle Measuring Rule 20mm Leg Length, 270° Range - SOLA-Messwerkzeuge GmbH & Co KG
Product data conflict detected: the model designation is inconsistent — the field "typ" states "WMD 200", while the product label refers to "WMD 500". Additionally, leg length values contradict one another: the label specifies a leg length of 520 mm, but the supplementary entry indicates 20 mm. These discrepancies prevent creation of a reliable product description; please provide corrected or confirmed data to enable an accurate specification. It is crucial to resolve these inconsistencies to ensure the product information is accurate, as errors in data can lead to confusion, miscommunication, or potential issues in manufacturing, sales, and customer satisfaction.
55mm Angle Sensor 0-90° Digital 0.05° Resolution, IP Rating Not Specified - TECWERK
Precision of 0.05° combined with secure magnetic mounting delivers repeatable alignment and faster set-ups; order the TECWERK angle sensor directly via Metav Werkzeuge or ask our consultants if needed. TECWERK Angle Sensor 0–90° (digital, 0.05° resolution) — Digital angle sensor for workshop and inspection use TECWERK Angle Sensor 0–90° is a compact, digital device for angle setting and measurement in assembly, inspection and workshop environments. Digital readout with 0.05° resolution Recessed magnets for secure fixing Large LCD for clear, rapid readings Auto power‑off after approximately 5 minutes Accurate readings for reliable alignment The sensor provides a digital LCD readout with a nominal resolution of 0.05°, enabling precise positioning across a 0–90° measuring range. Such resolution and a documented repeatability of 0.05° mean that consecutive measurements return the same value within a very small tolerance, which is essential for jigs, gauges and machine set-up tasks where consistent angle replication reduces rework. The electronic display simplifies interpretation of values, so teams can verify settings quickly without manual interpolation. This combination of precision and repeatability supports process stability and reduces inspection time. Practical mounting and user-friendly functions Designed for day-to-day workshop use, the unit features recessed magnets on the sides and underside that permit fast attachment to ferrous surfaces while keeping the sensor flush and protected. The robust housing withstands handling in industrial settings and protects the electronics. Operationally, the device offers zeroing in any position, an on/off control and a hold function to freeze the displayed value for documentation or adjustment. These functions reduce operating steps and minimise the risk of measurement errors during component set-up, making the sensor suitable for both bench work and machine-side checks. Compact form and integrated safeguards for efficient workflows With compact dimensions — height 55 mm, width 30 mm and length 55 mm — the instrument is easy to store and place into tight set-ups without obstructing access. The electronics include an auto power-off after roughly five minutes of inactivity, extending battery life and reducing unexpected downtime. The device is listed as inspection required, so it fits into regulated quality routines and calibration schedules; this ensures traceability and compliance where formal verification is necessary. Together, compact size, protective build and smart power management support uninterrupted production and dependable measurement practice. For reliable angle setting with industrial robustness, contact Metav Werkzeuge for ordering or technical advice — info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 2000858775NW Product type: Angle sensor Brand: TECWERK Packaging unit: 1 Core specifications Measuring range: 0–90 ° Resolution (display): 0.05 ° Repeatability: 0.05 ° Height: 55 mm Width: 30 mm Length: 55 mm Special features Digital device for angle setting Robust housing Recessed magnets on sides and underside Large LCD display with clear readout On/off and zeroing in any position Hold function to freeze measured value Electronics auto switch-off after approx. 5 minutes Inspection required FAQ What accuracy can be expected from this angle sensor? The TECWERK angle sensor (SKU 2000858775NW) provides a display resolution and repeatability of 0.05°, ensuring high-precision readings suitable for alignment and set-ups. Can the sensor be fixed to a machine table or fixture? Yes, recessed magnets on the sides and underside enable secure attachment to ferrous tables and fixtures, allowing stable measurements during adjustment. Is there a way to retain a measurement for documentation? The unit includes a hold function that freezes the displayed value so the reading can be documented or transferred without loss. Does the device conserve battery when not in use? The electronics automatically switch off after approximately five minutes of inactivity to preserve battery life and reduce unexpected power loss. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
600 x 300mm Angle Plate With Stop, 50 x 9mm Cross-Section - TECWERK
Benefit from the combination of DIN 875/II accuracy, a rigid 50 x 9 mm cross-section and an integral stop for repeatable squaring and alignment operations; order the angle directly via Metav Werkzeuge or consult their specialists for application guidance. Angle square DIN 875/II – 600 x 300 mm with integral stop (TECWERK) Angle square DIN 875/II – 600 x 300 mm with integral stop (TECWERK) is a precision alignment tool for workshop inspection and layout work, designed to deliver repeatable squaring over long legs. DIN 875/II accuracy class II Legs 600 x 300 mm Integral stop included Cross-section 50 x 9 mm Precision that supports reliable inspection and setup The precision square conforms to DIN 875/II, which guarantees a defined tolerance for squareness that is suitable for routine inspection and setup tasks in production and maintenance. The standardised accuracy class ensures comparability across measuring tools and fixtures, enabling predictable results when checking machine alignments or component faces. With certified squareness, measurement deviations are reduced, supporting efficient process control and fewer reworks. Robust geometry for stable alignment and clamping A pronounced 50 x 9 mm cross-section provides the necessary rigidity for long-legged applications, reducing deflection during handling and when used against workpieces. The 600 x 300 mm leg geometry gives a large reference surface for extended layouts while the integral stop secures repeatable positioning against edges or datum surfaces. This combination of dimensions and an abutment reduces set-up time and improves the consistency of checks and jigs. Practical handling, maintenance and workshop integration The construction supports straightforward use in benches and inspection areas: the long legs allow clear line-of-sight to marking lines and measuring devices, while the integral stop simplifies repetitive tasks. Routine care consists of keeping reference faces clean and protected from impacts; a light protective coating or storage in a dry place will preserve the calibrated edges. For integration into existing workflows, the square functions as a stable reference for dial indicators, height gauges and layout operations. For application advice or to discuss suitability for specific setups, contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com to speak with a specialist about the TECWERK angle square and its use in the workshop. Technical data Article number: 2000858360NW SKU: 2000858360NW Brand: TECWERK Product type: Angle square Execution: with integral stop Leg length: 600 x 300 mm Cross-section: 50 x 9 mm Facts Accuracy: DIN 875/II Packaging unit: 1 Special features Integral stop for repeatable positioning Long legs for extended reference surfaces FAQ What accuracy does the angle square offer? The angle square meets DIN 875/II, providing a defined class II tolerance for squareness suitable for routine inspection and workshop setup. How does the integral stop improve usability? The integral stop on the TECWERK angle square secures the tool against a datum, enabling quicker, repeatable positioning and reducing setup variation. Which leg dimensions are provided for this square? The tool is supplied with 600 x 300 mm legs, offering extended reference surfaces for layout and inspection tasks. What maintenance is recommended to preserve accuracy? Keep reference faces clean and free from nicks; store the square in a dry, protected area and avoid impacts to maintain the calibrated edges. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
600 x 300mm Angle Plate Without Stop, 50 x 9mm Cross Section - TECWERK
Taking advantage of DIN 875/II accuracy and a 50 x 9 mm rigid section, this engineer square combines dependable squareness with a large working span of 600 x 300 mm; order directly via Metav Werkzeuge or consult their specialists for integration into production setups. Engineer square DIN 875/II (legs 600 x 300 mm) — TECWERK The Engineer square DIN 875/II (legs 600 x 300 mm) is a precision angle gauge designed for layout, inspection and assembly tasks in metalworking and workshop environments, supplied without a stop for flexible fixturing. DIN 875/II accuracy class Legs 600 x 300 mm, rigid 50 x 9 mm section Supplied without a stop for flexible use Reliable squareness that supports quality control Manufactured to DIN 875/II standards, this square provides consistent precision for routine inspection and layout operations. The accuracy class indicates that the instrument is suitable for general workshop and production control where verified right angles are required. The stable reference faces reduce measurement uncertainty, helping to keep parts within specified tolerances and to accelerate in-process checks. Stiff geometry for stable referencing and repeatability A 50 x 9 mm cross-section and a leg span of 600 x 300 mm deliver a firm, vibration‑resistant platform for marking and inspection. The long legs allow a greater contact area on larger workpieces, improving repeatability when transferring angles or checking perpendicularity. The robust geometry minimises flex during use, so set-ups remain reliable during repetitive tasks and manual handling. Flexible integration thanks to the design without a stop Being supplied without a stop gives freedom for custom fixturing and clamping arrangements in jigs or on inspection benches; the absence of a fixed heel enables close alignment to irregular surfaces and bespoke setups. For production workflows that require variable alignment or where a stop would interfere with clamping, this configuration simplifies adaptation while maintaining the same DIN-class reference accuracy. For precision right‑angle work choose the TECWERK engineer square and contact Metav Werkzeuge for product advice and reliable supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000858260NW Label: Winkel DIN 875/II Schenkel-L.600x300mm o.Anschlag TECWERK Manufacturer: TECWERK Facts Legs (L x W): 600 x 300 mm Cross-section: 50 x 9 mm Packaging unit: 1 Special features DIN 875/II accuracy class Supplied without a stop Product type: Angle FAQ What accuracy standard does this square comply with? The square conforms to DIN 875/II, which means the TECWERK engineer square is made for general workshop inspection and layout where this class of squareness is specified. Is this tool suitable for larger workpieces and repetitive layout tasks? Yes — the 600 x 300 mm legs and 50 x 9 mm section give the square the stiffness needed for larger components and repeated referencing in workshop operations. What does "supplied without a stop" mean in practice? It means the square has no fixed heel or stop; the TECWERK angle can be fitted directly against faces or used with custom clamps, offering greater flexibility for non-standard setups. How should the square be stored to preserve accuracy? Keep the square clean and free of chips, store it flat or hanging in a protected area, and wipe contact faces with a light protective oil if not used for extended periods to prevent corrosion and maintain accuracy. Can the square be used to set up jigs and fixtures? Yes — its DIN 875/II accuracy and long legs make it suitable for aligning and checking jigs, fixtures and assembly references in a production or workshop environment. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
600 x 330 mm Flat Galvanised Fitters Square, Flat - Metav IndustryLine
Combine a galvanised, flat profile with special-steel rigidity and a generous 600 × 330 mm measuring face for dependable workshop layout and marking. Order the machinist's square directly via Metav Werkzeuge or consult our advisors for specification support. Machinist's square M214.510 – flat galvanised, 600 × 330 mm (Metav IndustryLine) A machinist's square designed for marking, alignment and simple layout tasks in metalworking and general workshop applications, offering a flat galvanised surface and robust special-steel construction. Flat galvanised surface for rust resistance Large 600 × 330 mm measuring face Made from special steel for rigidity Factory standard (Werksnorm) quality Stable layout and reliable geometry for everyday metalwork The long, flat profile delivers a consistently straight reference edge across the full 600 × 330 mm face, which is especially valuable when aligning large panels or checking right angles on welded assemblies. Constructed from special steel, the tool combines low weight with structural stiffness; at 1.4 kg the square is easy to handle while remaining stable on the workpiece. The flat design reduces rocking and ensures repeatable contact, so layout lines and scribe marks stay true over repeated use. This makes the tool suitable for workshops where a dependable, low-maintenance reference is required for frequent marking and inspection. Corrosion resistance and maintenance benefits that save time The galvanised finish protects the surface against rust and contaminants commonly encountered in fabrication and maintenance environments. Compared with bare or painted tools, a galvanised surface sustains its flatness and requires minimal upkeep, reducing downtime for cleaning or re-finishing. The product is produced to Werksnorm (factory standard), ensuring consistent quality across deliveries and predictable behaviour in daily use. This durability translates into lower life-cycle costs and fewer interruptions during production tasks where a clean, flat reference edge is essential. Versatile application across workshop tasks and short learning curve As a purpose-built angle tool, the square serves for external and edge alignment, scriber and layout work, and quick right-angle checks on assemblies and subcomponents. The flat, unobtrusive profile is ideal for guiding marking tools and supporting manual measurement operations in fabrication, maintenance and light assembly. For users accustomed to metric workshop tools, the familiar dimensions and rigid construction make integration into existing workflows straightforward, while the galvanised finish helps the tool withstand shop-floor conditions without special handling. For corrosion-resistant precision and reliable workshop performance choose the Metav IndustryLine machinist's square M214.510 from Metav Werkzeuge; contact our specialists in Emmerich for specification advice or ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M214.510 GTIN: 4054469108971 SKU: M214.510 Weight: 1.4 kg Material: Special steel, galvanised Finish: Flat galvanised Norm: Werksnorm Tariff number: 90178090 Numbers / Core technical data Measuring face: 600 × 330 mm Mass: 1.4 kg Special features Flat profile for stable contact Galvanised corrosion protection Special-steel construction for rigidity Intended for marking, alignment and layout in metalworking FAQ What is the primary use of this square? The machinist's square M214.510 is intended for marking, alignment and quick right-angle checks on metal components and workshop assemblies. Is the surface protected against corrosion? Yes, the M214.510 features a galvanised finish that provides corrosion resistance suited to fabrication and maintenance environments. Which material is the square made from? The square is manufactured from special steel with a galvanised surface to combine rigidity and low maintenance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600 x 330mm Fitters Angle 30 x 5mm Without Stop - TECWERK
Take advantage of the combination of precise right‑angle referencing, a rigid cross‑section and flexible handling for dependable layout work. Order the TECWERK L‑shaped machinist's square directly via Metav Werkzeuge or ask the consultants for application advice. TECWERK L‑shaped machinist's square 600 x 330 mm — L‑leg layout, supplied without stop The TECWERK L‑shaped machinist's square 600 x 330 mm is a workshop layout and inspection tool designed for clear perpendicular referencing in fabrication, assembly and inspection tasks, supplied without a fixed stop to allow unobstructed placement along component edges. L‑shaped legs 600 x 330 mm Cross‑section 30 x 5 mm Supplied without stop Accurate right‑angle referencing for layout and fabrication The TECWERK L‑shaped machinist's square 600 x 330 mm provides a defined datum for large‑scale marking and assembly operations where predictable perpendicular lines are essential. The specified leg lengths (600 x 330 mm) permit measurements and scribe lines to be transferred across extended surfaces without repeated repositioning. Using clear geometric dimensions as a reference reduces the need for temporary fixtures and speeds up setup, which in turn supports consistent throughput in batch tasks. Consistent stability from a controlled cross‑section A cross‑section of 30 x 5 mm contributes directly to the tool's resistance to bending and torsion during manual use. This controlled profile concentrates stiffness along the legs so that the reference edge remains true when pressed against a workpiece for scribing or inspection. The result is improved repeatability, fewer measurement deviations and less corrective rework, which benefits production environments that depend on predictable part alignment. Flexible handling and straightforward workshop integration Supplied without stop, this machinist's square permits unobstructed sliding and placement, making it suitable for irregular edges and non‑standard workpieces where a fixed stop would be restrictive. The absence of a stop also simplifies storage and allows easier access when the square is used as a long straight edge. For additional technical information or measurement guidance, Metav Werkzeuge provides application advice and product details; general enquiries can be sent to info@metav-werkzeuge.com or made by phone on +49 2822 7131930. For reliable right‑angle referencing and expert advice on the TECWERK L‑shaped machinist's square, contact Metav Werkzeuge for ordering and application support. Technical Data SKU: 2000858060NW Label: Schlosserwinkel Schenkel-L.600x330mm o.Anschlag TECWERK Product type: Schlosserwinkel Manufacturer: TECWERK Facts Leg lengths: 600 x 330 mm Cross‑section: 30 x 5 mm Pack unit: 1 Special features Supplied without stop (ohne Anschlag) L‑shaped layout for extended surface referencing FAQ What applications are this square suitable for? The TECWERK L‑shaped machinist's square 600 x 330 mm is suitable for layout, scribing and inspection tasks in metalworking and general workshop operations where clear perpendicular referencing is required. How does the cross‑section affect performance? A 30 x 5 mm cross‑section increases stiffness along the legs of the square, so the TECWERK square maintains a truer right angle under hand pressure and reduces measurement variability during marking. Can the square be used on irregular workpieces? Yes, supplied without a stop, the machinist's square allows unobstructed placement and sliding along edges, making it adaptable to non‑standard or irregular components. Is the SKU available for ordering or reference? The product is listed under SKU 2000858060NW, which can be quoted when requesting product information or placing an order via Metav Werkzeuge. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
600 x 330mm Machinist Square With Stop 30 x 5mm Section - TECWERK
Combining a 600 x 330 mm leg profile, a sturdy 30 x 5 mm cross-section and an integrated stop delivers stable, repeatable layout and positioning for metal fabrication tasks; order directly via Metav Werkzeuge or consult our advisors for specification support. TECWERK Fitter's Square 600 x 330 mm (with stop) — 30 x 5 mm cross-section TECWERK Fitter's Square 600 x 330 mm is a heavy-duty metalworking square designed for precise layout, alignment and repeatable positioning in workshop and fabrication environments. Heavy-duty 600 x 330 mm leg length Robust 30 x 5 mm cross-section Integrated stop for repeatable positioning Improved stiffness for stable marking and measurement The pronounced 30 x 5 mm cross-section increases rigidity compared with slimmer profiles, reducing bending during scribes or tacking. This structural dimension is particularly relevant when making right‑angle checks on long components: a larger cross-section resists torsion and delivers more consistent contact across the leg. The integrated stop converts single measurements into repeatable reference points for multiple workpieces, helping to maintain uniformity across production runs while reducing rechecks and rework. The design therefore supports reliable layout and clear, repeatable marking. Faster setup and consistent alignment on the shop floor With leg lengths of 600 x 330 mm, the tool covers larger assemblies without constant repositioning, which shortens set‑up time and streamlines workflow. The combination of extended legs and the built-in stop enables quick transfer of a datum across several parts, making it suitable for batch marking and jig preparation. These features translate into measurable operational advantages: fewer interruptions during layout, improved throughput and steadier alignment when welding, drilling or assembling metal components. The packaging comes as a single unit for straightforward stock handling. Proven procurement and dependable workshop supply Selecting this fitter's square through Metav brings the benefit of a tested supply chain and workshop readiness. Metav stands for democratisation of precision and operates a quality filter from Emmerich, serving over 48,000 customers and offering more than 250,000 products to reduce supplier complexity. This context provides assurance that the tool will arrive as described and be backed by a transparent ordering process. For additional technical details or compatibility questions, Metav’s consultants are available to clarify specifications and help assess suitability for specific fabrication tasks. Contact Metav Werkzeuge for ordering or technical advice on this TECWERK fitter's square — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance and delivery guidance Technical data Article number: 2000858160NW Product: Fitter's square Brand: TECWERK Execution: with stop Cross-section: 30 x 5 mm Leg lengths: 600 x 330 mm Packaging unit: 1 UID: 2000858160NW Dimensions / Measurables Leg lengths: 600 x 330 mm Cross-section: 30 x 5 mm Packaging unit: 1 Features / Version With stop Brand TECWERK SKU 2000858160NW FAQ How does the stop improve repeatability with this TECWERK fitter's square? The integrated stop on the TECWERK fitter's square creates a fixed reference that enables repeatable positioning across multiple components, reducing measurement variance and speeding up batch layout tasks. Which tasks is the TECWERK fitter's square best suited for? This TECWERK fitter's square is intended for metalworking layout, assembly alignment and fabrication marking where longer legs and a rigid profile aid accurate right‑angle checks. What are the exact leg dimensions and cross-section of this square? The product features leg lengths of 600 x 330 mm and a cross‑section of 30 x 5 mm, as stated for SKU 2000858160NW. Is the TECWERK fitter's square supplied individually? Yes, the TECWERK fitter's square is supplied as a single unit (packaging unit 1) and is ready for immediate stock or workshop use. Can the TECWERK fitter's square be used for repeat marking of identical parts? Yes, the integrated stop on the TECWERK fitter's square facilitates repeat marking and consistent transfer of a datum across identical components. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
600 x 600 mm Flange Square, Galvanised No Packaging - Metav IndustryLine
Take advantage of a galvanised, special steel construction and a 600 x 600 mm working surface to secure reproducible right‑angle references in workshop and fabrication tasks; order the flange square directly via Metav Werkzeuge or ask the consultants if technical advice is required. Flange square M214.543 — 600 x 600 mm galvanised angle plate, Metav IndustryLine A flange square, 600 x 600 mm, for precise alignment and inspection of right‑angle assemblies and flange faces in metalworking and installation environments Galvanised special steel construction 600 x 600 mm working surface Factory standard conformity Lightweight at 2.9 kg for easy handling Reliable right‑angle reference for assembly and inspection A stable 90° reference speeds up layout and quality checks; the flange square provides a flat, repeatable datum across a broad 600 x 600 mm area so fixtures and flanges can be aligned with confidence. The design translates material flatness into measurable outcomes, reducing setup time and rework. Where a clear, rigid reference is required for inspection or assembly, the robust geometry delivers consistent mechanical support and visible orientation for both hand and tool‑assisted processes. Corrosion protection that keeps the tool serviceable The galvanised finish forms a passive barrier against moisture and industrial contamination, extending usable life in workshop atmospheres. Combined with the underlying special steel, the surface treatment maintains dimensional stability and reduces the need for frequent surface care, which is especially valuable when the tool is in regular use near cutting fluids or in outdoor assembly situations. Conformity to the stated factory standard ensures consistent production quality across units. Practical handling improves throughput and ergonomics At approximately 2.9 kg, the plate balances stability with manageable handling for one‑person placement and inspection tasks. The relatively low mass means faster positioning and less operator fatigue during repeated checks, while the broad working surface supports quick visual and tactile inspection workflows. For integration into production benches or mobile inspection carts, the tool’s compact footprint and solid construction allow it to be used as a temporary datum or as part of a staged alignment routine. Choose the Metav IndustryLine flange square for durable, corrosion‑resistant right‑angle references and contact Metav Werkzeuge for tailored supply and technical guidance from Emmerich. Technical data Article number: M214.543 GTIN: 4054469109152 Manufacturer: Metav IndustryLine Size: 600 x 600 mm Weight: 2.9 kg Material: Special steel, galvanised Norm: Factory standard (Werksnorm) Tariff number: 90178090 Facts Working surface: 600 x 600 mm Mass: 2.9 kg GTIN: 4054469109152 Tariff code: 90178090 Special features Galvanised corrosion protection Special steel construction Delivered without packaging Intended for alignment and inspection of flange and right‑angle assemblies FAQ What material is the flange square made from? The flange square is manufactured from special steel with a galvanised surface finish; the Metav IndustryLine flange square M214.543 combines rigidity with corrosion protection. Is the surface protected against corrosion? Yes, the galvanised coating provides corrosion resistance, helping to preserve the tool’s flatness and service life in typical workshop conditions. For which tasks is this angle plate suitable? It is intended for alignment, inspection and right‑angle referencing of flanges, housings and assemblies where a reliable datum across a 600 x 600 mm area is required. Does the product come packaged? The item is supplied without packaging, as stated in the product label. Which standard does the tool follow? Production conforms to the stated factory standard (Werksnorm) for consistent manufacturing and quality characteristics. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Angle Alu-Line Adjustable Aluminium/Steel/Nutwood Handle 305mm - Ulmia GmbH
Take advantage of a precision-milled aluminium leg paired with a hardened steel rule and a precision adjusting screw for reliable right-angle references in workshop and inspection work; order directly via Metav Werkzeuge or consult our specialists for suitability and delivery. Ulmia Alu-Line 500 Precision Angle Square — adjustable, 600 mm legs The Alu-Line 500 angle square is an adjustable, precision-milled measuring tool designed for accurate layout and inspection tasks in workshops and toolrooms. Precision-milled aluminium leg with walnut inlay Hardened steel rule with engraved measuring scale Adjustable via precision adjusting screw Hairline rule 540 mm for fine alignment Accurate right-angle references for production and inspection The Alu-Line 500 provides a stable reference for layout and inspection thanks to a precision-milled aluminium leg joined to a hardened steel rule with an engraved measuring scale. The combination of these materials minimises deformation under light contact and allows consistent transfer of right angles from template to workpiece. For production environments where repeatability is essential, the solid construction reduces the need for frequent rechecking while supporting faster setup times and fewer measurement interruptions. Comfortable handling, refined materials and fine alignment An ergonomically profiled handle with walnut inlay and hollowed grip grooves ensures secure handling during repetitive tasks, while the generous handle length (305 mm) supports stable two-handed use when marking large panels. The integrated hairline rule (540 mm) enables fine alignment when squaring against edges or scribed lines, and the precision adjusting screw allows micro-adjustments to eliminate play between the leg and the rule. These design choices reduce human error and make precise alignment quicker and more intuitive for experienced technicians and skilled tradespeople. Traceable quality and low-maintenance performance The square is supplied as a precision-executed instrument with a hardened steel measuring component and is marked as inspection required, indicating it is subject to quality checks and traceable verification. This status supports quality assurance routines in small series production and inspection benches where documented conformity is required. Robust materials and simple mechanical adjustment keep maintenance demands low and extend service intervals, supporting reliable daily use in busy workshop settings. For a dependable measuring solution from Ulmia and specialist advice on integration into workshop workflows, contact Metav Werkzeuge in Emmerich for personalised consultancy and delivery arrangements. Technical data Article number: 4000858494NW Name: Alu-Line 500 adjustable angle square Manufacturer: Ulmia GmbH Facts Leg length: 600 mm Handle length: 305 mm Hairline rule: 540 mm Packaging unit: 1 Special features Precision-milled aluminium leg Walnut wood inlay on both sides Hollowed grip grooves on handle Hardened steel rule with engraved measuring scale Adjustable with precision adjusting screw Inspection required (prüfpflichtig: yes) FAQ What are the overall dimensions of the square? The Alu-Line 500 adjustable angle square has a leg length of 600 mm and a handle length of 305 mm, with a hairline rule of 540 mm for fine alignment. How is the scale fitted and adjusted? The measuring scale is engraved on a hardened steel rule and is adjustable by a precision adjusting screw to remove play and allow micro-alignment. Does the instrument require inspection or calibration? Yes — the product is marked as inspection required, which means the Alu-Line 500 is supplied with the expectation of verification and traceability within quality assurance processes. What materials are used in the construction? The square features a precision-milled aluminium leg, a hardened steel measuring rail and decorative and ergonomic walnut inlay on the handle. How is the tool supplied? The item is supplied as a single unit (packaging unit: 1). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600x180mm Carpenter's Square With Spirit Level And 40x3mm Rail, 34x12mm Stop - Metav IndustryLine
Take advantage of the combination of a rigid profile, clear millimetre graduations and an integrated spirit level for reliable right‑angle layout and alignment. Order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Carpenter's square with spirit level M203.013 — 600 x 180 mm aluminium square A Carpenter's square with spirit level M203.013 designed for squaring, layout and levelling tasks in woodworking, joinery and general workshop applications. 600 x 180 mm aluminium blade Integrated spirit level for alignment Millimetre scale for quick measurements 34 x 12 mm sturdy stock profile Accurate squaring that speeds up assembly The M203.013 is engineered for repeatable right‑angle layout: a long blade of 600 x 180 mm provides reach while the compact stock keeps the reference face stable. The combination of a precise profile and a clear edge reduces alignment error and minimises rework. For production and bench work alike, the tool supports efficient marking and transfer of lines, contributing to a smoother workflow and fewer trial cuts. Stiff profile for consistent measurements A 40 x 3 mm rail profile gives the blade the necessary stiffness to resist twist during use. That rigidity preserves the squareness between blade and stock over repeated use, so measurements remain dependable. The robust cross‑section also helps maintain flatness across the working length, which is particularly valuable when checking larger panels or assemblies where a bent rule would introduce uncertainty. Clear, practical read‑outs for everyday checks The integrated spirit level and printed mm scale facilitate two tasks at once: rapid leveling and quick dimensional checks. The millimetre graduations allow straightforward comparisons and rough setting of workpieces without reaching for a separate rule, while the spirit vial delivers fast visual confirmation of horizontal or vertical alignment. Together these features cut handling time on routine checks. Lightweight construction for easy handling on site Made from aluminium, the square combines lightweight portability with corrosion resistance for daily workshop or site use. At approximately 0.4 kg, the tool is easy to manoeuvre, hang on a tool board or carry between tasks without adding fatigue. The low mass paired with a solid profile supports one‑handed positioning when marking or clamping components. Stable stock for reliable reference faces The 34 x 12 mm stock offers a wide, stable contact area against edges and faces, ensuring the blade sits squarely during marking and inspection. This stability is advantageous when working with stocky timber, frames or wider mouldings where a narrow reference could rock; the broader face reduces the risk of movement and helps maintain consistent results across repetitive operations. Practical benefits for workshops and professionals Combining a rigid profile, readable scale and spirit level produces a tool that streamlines routine layout and levelling tasks. Reduced setup times, fewer measurement back‑checks and a durable, easy‑to‑handle construction translate into tangible time savings on both single jobs and repetitive production runs. For shops seeking dependable, no‑nonsense measuring aids, the design focuses on precision where it matters most. Choose the Metav IndustryLine M203.013 for dependable squaring and rapid alignment; contact Metav Werkzeuge for specialist advice and reliable supply from Emmerich. Technical data Article number: M203.013 GTIN: 4054469102450 Manufacturer: Metav IndustryLine Material: Aluminium Facts Dimensions: 600 x 180 mm Blade profile: 40 x 3 mm Stock dimensions: 34 x 12 mm Weight: 0.4 kg Special features Integrated spirit level Millimetre scale on blade Sturdy stock profile for stable contact Lightweight aluminium construction FAQ Is the scale graduated in millimetres? Yes. The M203.013 carpenter's square from Metav IndustryLine features a millimetre scale on the blade for quick dimensional checks and straightforward marking. Can the square be used for levelling as well as squaring? Yes. The integrated spirit level allows the square to serve both as a levelling aid and as a squaring tool for layout and installation tasks. Is the rail profile stiff enough for larger panels? The 40 x 3 mm blade profile provides increased stiffness so the tool maintains flatness and consistency when checking larger panels and assemblies. Is the square suitable for site work? Its aluminium construction and low weight make the tool convenient for site use; the durable profile withstands regular handling between workshop and on‑site tasks. What is the reference surface like for positioning? The 34 x 12 mm stock offers a wide, stable contact face that reduces rocking and supports repeatable placement against edges and faces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600x280 Carpenter's Square Stainless Steel With Mm Scale And Scriber Holes, Powder Coated - Metav IndustryLine
High-visibility powder‑coated finish, seamless stainless construction and an integrated millimetre scale with 5 mm scribe holes combine to speed up layout work while resisting corrosion. Order the Carpenter's square directly via Metav Werkzeuge or ask our consultants if needed. Carpenter's square M214.930 (600 x 280 mm) — seamless stainless steel, powder‑coated with millimetre scale & 5 mm scribe holes The Carpenter's square M214.930 is a robust, seamless stainless steel layout square for carpentry and joinery that integrates a clear millimetre scale and evenly spaced scribe holes for efficient, repeatable marking. Seamless stainless steel construction Integrated millimetre scale for precise marking Scribe holes every 5 mm for repeat layout Faster, more reliable marking and layout The square's integrated millimetre scale and 5 mm scribe holes turn repetitive marking into a single, consistent operation. Marking steps that normally require repeated measuring are reduced to swift, repeatable actions thanks to the evenly spaced holes; this lowers the risk of cumulative error and reduces layout time on site or in the workshop. The clear graduations on the millimetre scale aid quick alignment; combined with the scribe holes, they support both rough framing and detailed joinery without the need for auxiliary gauges. Durable, corrosion‑resistant build for long service life Manufactured from stainless steel in a seamless construction, the square resists warping and edge distortion that can compromise accuracy over time. A yellow powder‑coated finish improves visibility against timber and metal while providing an additional barrier against surface corrosion and abrasion. The combination of material and coating delivers a low‑maintenance tool that retains its geometry and legibility through daily use in workshop and site environments. Balanced stiffness, reach and handling With a measuring face of 600 x 280 mm and a cross‑section of 35 x 1.2 mm, the gauge offers a practical balance between reach and rigidity. The profile provides sufficient stiffness for repeatable right‑angle checks and layout tasks while keeping the mass low; the tool weighs only 0.4 kg, which simplifies handling during prolonged use or when transferring between stations. This balance reduces operator fatigue and contributes to more consistent results when working on frames, carcasses or larger panels. Practical applications and workshop advantages This layout square is tailored for carpentry, joinery and general workshop marking: framing, rafters, stair stringers, cabinet carcasses and scribing tasks all benefit from the repeatable marking system. The seamless stainless body ensures that edges remain true for squaring operations, while the millimetre scale and scribe holes support both rough and precision workflows. As part of the Metav IndustryLine range, the tool complements broader workshop standards and is a dependable addition to toolkit and production benches aiming for consistent quality. For reliable layout and marking choose the Metav IndustryLine Carpenter's square M214.930 — contact Metav Werkzeuge GmbH in Emmerich for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: M214.930 GTIN: 4054469183473 Label: Zimmermannswinkel 600x280, beschichtet rostfrei, nahtlos, mit mm‑Skalierung u Anreißlöchern Brand: Metav IndustryLine Dimensions & core data Measuring face: 600 x 280 mm Cross‑section: 35 x 1.2 mm Weight: 0.4 kg Features & materials Material: stainless steel, seamless Finish: yellow powder‑coated Scale: millimetre scale Scribe holes: every 5 mm Suitable for carpentry and joinery layout FAQ How precise is the marking with this square? The Carpenter's square M214.930 provides clear millimetre graduations and 5 mm scribe holes that enable consistent, repeatable layout; the fixed geometry of the seamless stainless body maintains squareness for reliable marking. Is the M214.930 suitable for outdoor use on building sites? Yes. The stainless steel construction combined with a yellow powder‑coated finish improves resistance to corrosion and abrasion, making the square suitable for workshop use and outdoor site conditions. What are the exact dimensions and weight of the tool? The Carpenter's square M214.930 measures 600 x 280 mm, has a cross‑section of 35 x 1.2 mm and weighs 0.4 kg, which balances reach with manageable handling. Which tasks is this layout square intended for? This Metav IndustryLine square is designed for carpentry and joinery layout work such as framing, cabinet marking, scribing and angle checks where repeatable marking and clear graduations speed up production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600x280 Stainless Carpenter's Square 35x1.2mm Seamless With Mm Scale, No Scribe Holes - Metav IndustryLine
Take advantage of the combination of corrosion‑resistant stainless construction, a clear mm scale and a rigid 35×1.2 mm cross‑section for reliable layout work on site and in the workshop; order the carpenter's square directly via Metav Werkzeuge or ask our consultants if needed. Carpenter's square M214.910 – robust 600×280 mm stainless, seamless The Carpenter's square M214.910 is a heavy‑duty layout square for carpentry and workshop use, designed for straight, repeatable angle and edge checks with a clear millimetre graduation. Seamless stainless construction for corrosion resistance Clear mm scale on blade for quick layout readings No scribe holes for an uninterrupted reference edge 35×1.2 mm rigid cross‑section for stable measuring Precision and robustness for everyday layout tasks The seamless stainless steel construction provides a straight, reliable reference that resists corrosion and warping; the solid profile reduces flex during measurement and marking. The fine mm scale along the blade facilitates exact layout and transfer of dimensions, making repetitive work faster and less error‑prone. Thanks to the 35×1.2 mm cross‑section, the tool holds a flat plane against the workpiece, which improves repeatability when checking angles or registering edges in joinery and metal‑framing tasks. Practical design that speeds up marking and checking With a 600×280 mm geometry the square balances reach and manoeuvrability: the long blade provides sufficient span for large timbers while the tongue remains easy to position for tight corners. The deliberately plain edge—specified as no scribe holes—keeps the reference surface continuous, so scribed lines are cleaner and the square sits true against profiles. At approximately 0.4 kg, the tool is lightweight enough for single‑handed positioning yet sturdy enough to remain stable during marking and layout. Built for workshop and site — dependable and serviceable A seamless build eliminates crevices that would otherwise trap moisture, supporting long‑term durability on site. The simple geometry reduces the need for maintenance and inspection, while the robust finish keeps the graduation legible under daily use. As part of the Metav IndustryLine range the M214.910 embodies the brand's quality filter in Emmerich: accessible precision tools that suit both the busy workshop and the mobile tradesperson seeking repeatable results and low life‑cycle overhead. Contact Metav Werkzeuge for procurement advice or to request delivery options directly from Emmerich; refer to the M214.910 for precise specification guidance. Technical data SKU: M214.910 GTIN: 4054469183398 Weight: 0.4 kg Material: stainless steel, seamless Dimensions: 600×280 mm Cross‑section: 35×1.2 mm Special feature: without scribe holes Facts Blade length: 600 mm Tongue length: 280 mm Cross‑section (mm): 35×1.2 Weight (kg): 0.4 Special features Seamless stainless construction Millimetre graduation on blade Uninterrupted reference edge (no scribe holes) FAQ What material is the square made from and how does it behave against corrosion? The Carpenter's square M214.910 from Metav IndustryLine is manufactured from seamless stainless steel, which reduces the risk of corrosion and maintains a straight reference surface during regular use. Is the mm scale suitable for fine layout work? Yes, the clear mm scale on the blade of the Carpenter's square M214.910 supports precise layout and transfer measurements for carpentry and workshop tasks. How heavy and portable is the tool for site work? With a weight of approximately 0.4 kg, the M214.910 is light enough for one‑handed handling while remaining stable for accurate marking and checking. Why does the square have no scribe holes and what benefit does that bring? The absence of scribe holes provides an uninterrupted reference edge, allowing cleaner scribed lines and a more reliable seating against the workpiece for repeatable measurements. Can the square be used for metal as well as wood layout? The seamless stainless construction and rigid cross‑section make the M214.910 suitable for layout tasks in both timber and many light metal applications where a straight, corrosion‑resistant reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600x280mm Carpenter Square with 35x1.2mm Stainless Steel Section, Holes Every 5mm, mm Scale - Metav IndustryLine
Compact, corrosion‑resistant construction, an integrated mm scale and evenly spaced scribe holes combine to speed up layout and marking tasks with repeatable accuracy. Take advantage of the rigid 35 × 1.2 mm cross‑section and generous 600 × 280 mm format for reliable on‑site performance — order via Metav Werkzeuge or ask their consultants for application advice. M214.920 Carpenter's square — stainless steel, 600 × 280 mm A M214.920 carpenter's square designed for fast, repeatable layout and marking in timber and light metalwork, featuring an engraved mm scale and scribe holes for precise transfer of measurements. Stainless steel, seamless construction Scribe holes every 5 mm for marking Integrated mm scale for quick layout Rigid 35 × 1.2 mm cross-section Faster layout with repeatable accuracy The combination of an engraved mm scale and evenly spaced scribe holes every 5 mm transforms a single tool into a compact marking system. Instead of measuring and transferring repeatedly, the framing tool allows immediate alignment and scribing across the workpiece, reducing cycle time and human error. The 600 × 280 mm format provides a broad reference edge for framing and cabinet work while remaining manageable for one‑person handling. Built‑in graduations are laser‑clear, ensuring that the marked lines are consistent even during repetitive tasks, which supports quality control and efficient workflow in production or on the building site. Long service life and workshop resilience Durability is achieved through seamless stainless steel construction, which resists corrosion and keeps tolerances stable under everyday wear. The solid geometry — 35 × 1.2 mm cross‑section — delivers the stiffness required to avoid twist and bounce when scribing or setting out longer lines. At approximately 0.4 kg, the tool balances rigidity with low weight for less fatigue during repeated use. These material and design choices mean fewer replacements and lower lifetime cost of ownership, providing a reliable foundation for repetitive layout tasks in busy workshops or on site. Practical handling that fits common tasks Holes spaced at 5 mm intervals act as quick reference points for pencil, awl or scribe, and also permit temporary cleat fixing when used as a drill or routing template. The smooth stainless surface is easy to clean and maintains its readable mm scale after prolonged use. The profile works equally well for timber framing, carcass assembly and light metal layout, offering a single tool solution that reduces tool changes. If further specification checks are required for particular jobs, Metav's product information and consultants can confirm compatibility with standard jigs and fasteners. Check stock and technical suitability with Metav Werkzeuge for delivery from Emmerich or to discuss how the M214.920 fits specific layout workflows Technical data Article number: M214.920 GTIN: 4054469183435 Weight: 0.4 kg Material: stainless steel, seamless Core specifications Dimensions: 600 × 280 mm Cross-section: 35 × 1.2 mm Hole spacing: every 5 mm Special features Integrated mm scale Scribe/marking holes for repeatable layout Lightweight yet rigid profile FAQ What material is the square made from and is it corrosion resistant? The M214.920 carpenter's square is made from seamless stainless steel, which provides good corrosion resistance suitable for workshop and site conditions. How do the scribe holes improve workflow? Holes spaced every 5 mm allow direct scribing or use as a drilling template, enabling faster, repeatable marking without repeated measurement transfers. Is the engraved scale suitable for precision work? The integrated mm scale gives clear visual graduations for layout tasks; for highly critical metrology, specialised measuring instruments should be used. Can the square be used for metal as well as wood? Yes — the rigid profile and stainless construction make the tool suitable for timber framing, carcass assembly and light metal layout work. What is the product identification for ordering or stock checks? Refer to article number M214.920 when enquiring about this carpenter's square. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600x280mm Try Square Stainless Steel Laser-Engraved mm Scale No Scribing Holes - TECWERK
Take advantage of a durable, easy-to-read layout tool that combines stainless steel construction and laser-etched millimetre graduations for precise marking and long service life; order via Metav Werkzeuge or contact their consultants for procurement and technical advice. Zimmermannswinkel Schenkel-L.600x280mm o.Anreißlöcher TECWERK — Stainless steel L-square with laser-etched mm scale Zimmermannswinkel Schenkel-L.600x280mm o.Anreißlöcher TECWERK is a robust L-shaped square intended for carpentry and layout work, featuring laser-etched millimetre graduations and supplied without scribing holes Stainless steel construction Laser-etched millimetre scale L-shape 600 × 280 mm legs No scribing holes Precise layout that speeds up workflow A heavy-duty L-square with laser-etched millimetre graduations offers clear, permanent markings that reduce re-measurement and accelerate repetitive tasks. The combination of a defined L-shape and leg lengths of 600 × 280 mm provides stable referencing for rafter cuts, framing layouts and material marking. The stainless steel body maintains straightness under normal site and workshop handling, ensuring that measurements remain consistent across shifts or jobs. Built to withstand workshop and site demands Made from stainless steel, the tool resists corrosion from humidity and common site exposures, which protects the scale and edge over time. The solid construction gives the square a firm feel when pressing against timber or sheet material, increasing control during marking and reducing slip. The absence of pre-drilled or scribing holes means the edge is uninterrupted, offering a continuous datum for scribing or scoring precisely along the full length. Clear graduations for dependable accuracy The millimetre graduations are applied by laser etching, a process that produces sharp, long-lasting lines that remain legible where printed scales would fade. Laser marking also keeps tolerances tight so that the scale can be read quickly and used confidently for transfer measurements. For users who depend on reproducible results—joiners, roofers and site carpenters—this reliability reduces waste and rework by ensuring layouts match design intent. Straightforward design that supports professional tasks The simple, purpose-driven form avoids unnecessary features and focuses on usability: a rigid right angle, clear metric graduations and a continuous edge for scribing. This makes the tool versatile for layout, angle checks and general workshop use without added complexity. For facilities consolidating supplies, the product’s dependability complements a lean inventory strategy by replacing multiple lesser-quality squares with one precise instrument. Contact Metav Werkzeuge for procurement or technical guidance and benefit from expert advice and reliable delivery from Emmerich to the workshop Technical data Article number: 2000858528NW UID: 2000858528NW Facts Leg lengths: 600 × 280 mm Scale: millimetre graduations, laser-etched Material: stainless steel Packaging unit: 1 Special features Without scribing holes L-shaped carpentry square Brand: TECWERK FAQ Is this square suitable for on-site carpentry work? Yes. The stainless steel construction and laser-etched millimetre graduations make the TECWERK L-square suitable for both workshop and site use, offering corrosion resistance and enduring legibility. Does the product include scribing or marking holes? No. The product is supplied without scribing holes, providing an uninterrupted edge for continuous marking and scribing. What are the exact dimensions of the square? The square features legs of 600 × 280 mm, as indicated by the product designation and the technical facts (SKU 2000858528NW). Will the graduations wear off with heavy use? The laser-etched millimetre scale is designed for long-term readability and is far more durable than surface-printed markings under routine workshop conditions. Which tasks is this square best suited to? The tool is ideal for carpentry, framing, rafter layout and general marking tasks where a stable right angle and clear metric graduations are required; it supports repetitive layout work with consistent results. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
600x330 mm Fitter's Square With Stop, Galvanised Special Steel Werksnorm - Metav IndustryLine
Benefit from a robust galvanised special-steel construction, a stable 600 x 330 mm geometry and an integrated stop that delivers repeatable right‑angle setups; order this tool directly via Metav Werkzeuge or consult the Metav team for application support. Metav IndustryLine Engineer’s Square M214.530 – 600 x 330 mm, galvanised stop An Metav IndustryLine engineer’s square M214.530 designed for precise right‑angle checks and repetitive layout work in metal workshops. Galvanised special steel construction Integrated stop for repeatable marking Robust 600 x 330 mm geometry Factory standard (Werksnorm) quality Reliable angle control for routine workshop tasks The square provides a stable reference for marking, checking and setting out during fabrication and assembly. Its 600 x 330 mm profile delivers a balance between reach and rigidity, helping to reduce setup time when working on plates, frames or housings. The integrated stop permits consistent repositioning for repetitive marking, which increases throughput and reduces measurement variance. Where straightforward, verifiable geometry is required, this configuration supports fast, reliable layout operations and avoids time‑consuming re‑checks. Built for repeatable setups and long service life Constructed from special steel and finished galvanised, the tool resists corrosion in busy shops and maintains true edges over prolonged use. The mass and form factor—approximately 2.2 kg—give the square inherent stability on the workpiece, so a single operator can achieve accurate transfers without constant clamping. The item is produced to Werksnorm (factory standard), which ensures consistent build quality and dimensional conformity across production batches. This combination of material choice and finish reduces maintenance demands and keeps downtime low. Practical format to support metalworking and fitting operations The overall design is compact enough for bench use yet long enough for many common fabrication tasks, making it a practical addition to machine shops, fitter benches and maintenance departments. The profile and straight faces facilitate clear scribing and reliable visual alignment against edges; the stop allows quick, repeatable positioning for batch work or jig setups. For users who value straightforward tools that perform consistently, this engineering square streamlines everyday workflows while remaining durable enough for heavy use. Select the Metav IndustryLine engineer’s square for robust, repeatable right‑angle work and contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M214.530 GTIN: 4054469109084 Material: Special steel, galvanised Special feature: with stop Norm: Werksnorm Core data Dimensions: 600 x 330 mm Weight: 2.2 kg Customs tariff number: 90178090 Special features Category: Measuring tool / square Finish: galvanised corrosion protection Application: layout, right‑angle checks, repetitive marking FAQ What is the primary use of this engineer’s square? The Metav IndustryLine engineer’s square M214.530 is intended for right‑angle checks, scribing and repeatable layout tasks in metalworking and fitting operations. Is the tool suitable for repeated batch marking? Yes; the integrated stop and the stable 600 x 330 mm geometry of the engineer’s square make it suitable for repeatable marking and positioning. What standard does the square conform to? The tool is manufactured to Werksnorm (factory standard), ensuring consistent production quality across units. How does the galvanised finish benefit workshop use? The galvanised surface protects the special‑steel body against corrosion in workshop environments, extending service life and maintaining reliable edges for layout work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ensure right angles every time with precision angle gauges
Angle measurement is decisive in metalworking, where even the smallest deviation from a 90° geometry can cause assembly errors or functional faults. The category covers both fixed verification tools and variable measuring instruments, presented here as angle gauges, with common synonyms control squares and sine bars used throughout.
Where and how these tools make the difference on the shop floor
For basic layout and rough alignment, the engineer’s square (a simple flat or bench square) serves as the workshop baseline; it is useful for marking and quick checks but not intended for precision components. When higher accuracy is required, control squares with hardened and lapped faces are used; they are produced in accuracy classes referenced by DIN 875 and designed for the light gap method, which reveals form errors by inspecting the gap between gauge and workpiece under illumination. In pipeline and vessel fabrication, the flange square provides a robust contact geometry to align flanged faces to pipe axes and to withstand high mechanical loading. For angles other than 90°, a sine bar enables trigonometrical determination by using end measures, achieving resolutions into the seconds of arc when set up correctly. Regular calibration and checks for wear and flatness of the legs are essential, since a rounded or damaged leg will distort results.
Practical advantages that reduce rework and speed production
- Reduced fitting errors through repeatable reference geometry using control squares.
- Clear detection of form errors with the light gap method (fast visual indication).
- Durable contact surfaces thanks to hardened and lapped faces, extending service life.
- Accurate non-90° measurement via sine bar setups, enabling fine angular adjustments.
- Stable alignment of flanged components with purpose-built flange squares, lowering assembly time.
Why Metav is the reliable partner for precision angle measurement
Metav stands for democratisation of precision. As an experienced precision partner, Metav combines decades of know-how with a comprehensive range for industry, craft and trade; over 48,000 customers trust this quality filter based in Emmerich. With a broad assortment and consistent supply, Metav simplifies procurement and ensures a dependable source for angle gauges, calibration accessories and workshop standards.
Quick summary
Accurate angle gauges — from basic engineer’s squares to high-precision control squares and sine bars — prevent costly fit problems and support reliable, repeatable manufacture. Choose tools matched to the required accuracy class and maintain them regularly to keep measurement integrity.
FAQ
What is the difference between an engineer’s square and a control square?
An engineer’s square is a workshop baseline for marking and rough checks, while a control square features hardened and lapped faces and is manufactured to tighter tolerances (per DIN 875) for inspection and detection of form errors.
How does the light gap method work for checking right angles?
The light gap method places the workpiece against a control square; uneven gaps visible under a light source indicate deviations from perpendicularity, providing an immediate visual assessment of form errors.
When should I use a sine bar instead of a fixed angle gauge?
Use a sine bar when you need precise angles other than 90°. By stacking end measures you set the desired angle trigonometrically, achieving much finer resolution than most fixed gauges allow.
How often should angle gauges be checked for wear?
Regular inspection of flatness and leg condition is mandatory; any rounding or damage to the legs can significantly falsify measurements, so schedule checks according to usage intensity and your quality control procedures.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com