Precise T-slot cutters for reliable fixture machining
T-slot cutters are engineered to produce the undercut head of a T-shaped slot in machine tables and fixture plates, providing secure, adjustable clamping for workpieces while the cutter shaft runs in a pre-machined guide. Using cutters with internal coolant channels ensures consistent delivery of high-pressure coolant directly to the cutting edges, which effectively removes chips from the enclosed cutting zone and dissipates process heat to prevent chip jamming and tool breakage. These tools are essential when machining hardened or long-duration setups where external coolant is ineffective, offering improved tool life, repeatable slot geometry and reduced downtime through reliable chip evacuation. The category also covers matching variants and complementary tooling such as twist drill adapters and precision caliper-referenced setups for precise positioning.
65mm T-Nut Cutter for RD-- 1003 Indexable Inserts L120mm, 6 Teeth, 22mm Shank - Teknik Makina
Benefit from precise T-slot production thanks to a robust indexable-insert system and a rigid shank for reduced vibration and predictable tool life; take advantage of quick insert changes and consistent chip control for efficient machining. Order the T-slot cutter directly via Metav Werkzeuge or ask our consultants if needed. T-slot cutter TKC181TM — 65 mm diameter, for RD-- 1003 indexable inserts A T-slot cutter designed for efficient machining of T-slots using RD-- 1003 indexable inserts, offering a compact overall length and a rigid 22 mm shank for stable operation in production and workshop environments. T-slot cutter 65 mm diameter for heavy cuts Compatible with RD-- 1003 indexable inserts Shank 22 mm for rigid toolholding Six cutting edges for efficient material removal Faster T-slot cycles with reliable indexable inserts The combination of a 65 mm diameter cutter body and an insert-based system delivers consistent cutting geometry and predictable results across repeated operations. The use of RD-- 1003 indexable inserts and six cutting edges reduces the frequency of full-tool changes: when an insert reaches wear limits, it is simply replaced, restoring cutting performance immediately. This approach lowers machining downtime and simplifies inventory management compared with solid tools, while maintaining repeatable slot dimensions during medium- to high-volume runs. Stable clamping and improved surface quality A shank 22 mm diameter provides the necessary rigidity to minimise chatter and vibration during engagement in the slot. Secure clamping of the inserts is achieved with T15 Torx fastenings and M3.5x8.5 screws, ensuring the cutting edges remain seated under load. Reduced micro-movement at the seat improves surface finish and prolongs insert life, contributing to fewer interruptions and more predictable process yields in both workshop-level setups and stricter production environments. Practical efficiency for production and workshop use Designed with replaceable cutting edges, the tool lowers total cost of ownership by separating the wear component from the tool body. The compact overall length supports setups where clearance is limited while retaining the stability required for T-slot profiles. Labelling and SKU tracking — including TKC181TM — aid spare-part logistics and procurement processes, making it straightforward to match the cutter body with the correct insert type and fasteners. Quick maintenance and straightforward handling Insert replacement requires only the specified Torx key and a clean seating of the insert to preserve cutting geometry. The modular concept means maintenance is largely a matter of swapping inserts and verifying torque on the fixing screws, rather than reconditioning the whole tool. The relatively low body weight and familiar fastening standard speed up handling and reduce service time, which supports continuous production where fast tool turnaround is essential. Discuss application specifics with Metav Werkzeuge’s specialists to confirm fitment and maximise the cutter’s productivity in the intended workflow — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Product type: T-slot cutter Manufacturer: Teknik Cutting Tools SKU: TKC181TM Compatible inserts: RD-- 1003 Measurements Diameter: 65 mm Overall length: 120 mm Shank diameter: 22 mm Weight: 0.478 kg Number of cutting edges: 6 Mounting & fasteners Torx key required: T15 Fixing screw: M3.5x8.5 Label: 65 mm T-slot cutter RD-- 1003 L120 mm FAQ Which indexable inserts fit this cutter? The cutter is designed for RD-- 1003 indexable inserts; using the specified insert ensures correct seating and the intended cutting geometry for the Teknik Cutting Tools T-slot cutter (TKC181TM). How are the inserts secured and what tools are needed? Inserts are fastened with M3.5x8.5 screws tightened using a T15 Torx key; the specified torque and clean seat faces maintain stable clamping for the TKC181TM. What clamping arrangement is recommended for best stability? Use a rigid toolholder or arbor with a compatible 22 mm bore to match the shank 22 mm diameter; firm, vibration-free clamping supports optimal performance of the Teknik Cutting Tools T-slot cutter. How many cutting edges are active and what is the benefit? The cutter features six cutting edges, which distribute cutting forces and enable higher material removal rates with improved balance compared with fewer-edge alternatives. Does the cutter body require regrinding or resharpening? No; the design uses replaceable indexable inserts, so wear management is handled by replacing inserts rather than regrinding the tool body, simplifying maintenance for the TKC181TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
65mm T-Nut Cutter for RD-- 12 Indexable Inserts, 50mm Overall Length - Teknik Makina
Combine the robustness of a 65 mm cutting diameter with compatibility for RD-- 12 indexable inserts and a 22 mm shank to ensure consistent T-slot production and reduced downtime; purchase the cutter directly via Metav Werkzeuge or consult our specialists for application advice. T-slot milling cutter TKC186TM (Teknik Makina) – 65 mm diameter, for RD-- 12 indexable inserts The T-slot milling cutter TKC186TM is a purpose-built tool for producing precise T-slots in industrial milling environments, designed for use with RD-- 12 indexable inserts and standard clamping systems. 65 mm diameter for robust T-slot cutting Designed for RD-- 12 indexable inserts 22 mm shank for secure clamping in holders Six cutting edges for efficient material removal Stable machining for repeatable slot quality With a substantial 65 mm diameter and a firm 22 mm shank, this cutter delivers enhanced rigidity that translates into improved surface finish and dimensional consistency. The tool’s geometry, combined with its six cutting edges, reduces chatter and spreads cutting forces, which is particularly important when integrating into automated or high-volume production. The result is lower scrap rates and predictable cycle times, helping to keep machining processes on schedule and within tolerance bands. Cost-efficient operation through indexable inserts Designed around RD-- 12 indexable inserts, the cutter enables rapid insert changes and consistent cutting performance without replacing the entire toolbody. This approach minimises tooling expenditure and shortens maintenance intervals: individual inserts can be rotated or replaced, restoring cutting quality quickly. For production planners, the main benefit is a clear reduction in inventory turnover for complete tools and a simpler approach to wear management and cost accounting. Straightforward integration and maintenance in workshops The tool’s overall length of 50 mm and a 23 mm cutting-length shank accommodate common clamp holders and tool presets while keeping the assembly compact. Fastening and maintenance follow standard practice, with Torx T15 drive and M3.5x8.5 screws for secure insert retention and easy servicing on the shop floor. At a nominal weight of 0.325 kg, the cutter balances rigidity with manageable handling during setup, aiding quick tool changes and seamless incorporation into existing tooling systems. For procurement and technical alignment, contact Metav Werkzeuge in Emmerich for personalised advice and supply by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: TKC186TM Label: 65mm T-Nut Fräser RD-- 12 L50mm Product type: T-slot milling cutter Manufacturer: Teknik Makina Facts Diameter: 65 mm Overall length: 50 mm Shank diameter: 22 mm Cutting length (shank): 23 mm Number of cutting edges: 6 Weight: 0.325 kg Design & special features Compatibility: for RD-- 12 indexable inserts Fastening: Torx T15 Screw: M3.5x8.5 Suitable for integration in standard clamping systems SKU: TKC186TM FAQ What insert type does the cutter use? The cutter is specified for RD-- 12 indexable inserts, allowing quick replacement and rotation to restore cutting performance. Is the shank compatible with standard tool holders? Yes, the 22 mm shank is sized to fit common holder systems and provides the rigidity required for stable T-slot machining. How many cutting edges does the tool have and why does that matter? The tool has six cutting edges; this increases material removal efficiency and distributes wear for longer effective service life between insert changes. What fastening method secures the inserts? Inserts are retained with a Torx drive; the cutter uses Torx T15 and M3.5x8.5 screws for reliable and serviceable clamping. Can this cutter be used in automated production cells? Yes, the compact overall length and robust design make it well suited for automated setups where consistent slot quality and rapid insert changes are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm T-Nut Cutter 55° for DCMT and 35° for VBMT Indexable Inserts 3 Cutting Edges, 25mm Shank - Teknik Makina
Take advantage of the combination of precise 35° cutting geometry, robust 25 mm shank stability and compatibility with VBMT 1604 indexable inserts for efficient, repeatable T-slot production; order directly via Metav Werkzeuge or request advice from our consultants. T-slot cutter S073TM — 75 mm, for VBMT/DCMT indexable inserts (55°/35°) The T-slot cutter S073TM is a purpose-made milling tool for producing T-slots and undercut grooves in industrial workpieces, compatible with industry-standard VBMT 1604 inserts and designed for reliable performance in production and repair workshops. 75 mm diameter for wide T-slots Compatible with VBMT 1604 inserts 25 mm shank diameter for rigid clamping Supplied with M4x10 Torx screw T15 Precision slotting with defined cutting geometry The cutter combines a defined 35° cutting angle with a three-edge configuration to deliver consistent engagement and chip formation during slotting operations. This geometry reduces variable cutting loads and supports predictable material removal, which is especially important in batch production and toolpath planning. The head’s 75 mm diameter provides a large contact circumference for efficient metal removal, while the three cutting edges offer a compromise between cutting speed and surface finish. The tool is identified by SKU S073TM and is supplied ready for standard indexable inserts. Stability and vibration control for reliable results A 25 mm shank and an overall length of 130 mm provide a stable connection to the toolholder, helping to reduce deflection and chatter in moderate to heavy cuts. The measured mass of 0.924 kg contributes to inertial stability at cutting speeds, and the shank-to-cutting-edge length of 40 mm maintains a compact overhang for improved rigidity. These characteristics support milling operations where repeatability and dimensional control are required, enabling smoother toolpaths and reduced scrap rates. Insert compatibility and clamping system explained The tool accepts VBMT 1604 indexable inserts; alternative seat geometries allow use of 55° DCMT inserts where appropriate. Indexable inserts permit quick edge renewal without regrinding, lowering downtime and simplifying inventory of cutting edges. Insert replacement is secured with an M4x10 Torx screw, tightened using a T15 key, ensuring a positive clamping interface and reliable seating. The cutter head design supports fast insert changes and secure retention under standard machining loads. Designed for workshop efficiency and straightforward handling With three cutting edges and standardised insert compatibility, the cutter reduces tooling complexity across multiple machines. The assembly uses conventional Torx hardware for repeatable clamp torque, while the machine-ready geometry minimises programming adjustments when switching from roughing to finishing passes. Documentation and parts lists accompany the tool, and its compatibility with common insert types simplifies procurement and tool management for production planners and maintenance teams. Contact Metav Werkzeuge to discuss suitability for specific applications and to arrange purchase or technical consultation for the Teknik Cutting Tools T-slot cutter S073TM Technical Data Article number: S073TM Name: T-Nut Fräser / T-slot cutter Manufacturer: Teknik Makina SKU: S073TM Facts Diameter: 75 mm Shank diameter: 25 mm Shank-to-cutting-edge length: 40 mm Overall length: 130 mm Number of cutting edges: 3 Weight: 0.924 kg Torx screw: M4x10 Torx key: T15 Cutting angle: 35° Special features Compatible with VBMT 1604 indexable inserts Insert angles: 55° for DCMT and 35° for VBMT Indexable Inserts Three cutting edges for balanced cutting action Standard Torx clamping for quick insert changes FAQ Which insert type is required for this cutter? The cutter uses VBMT 1604 indexable inserts; the design also accommodates DCMT inserts with a 55° seat where specified. What are the critical dimensions for toolholder selection? Key dimensions are a 75 mm head diameter and 25 mm shank diameter with an overall length of 130 mm and a shank-to-cutting-edge length of 40 mm. How is each insert secured in the cutter? Inserts are fixed with an M4x10 Torx screw and require a T15 Torx key for tightening and replacement. How many cutting edges does the tool have and what is the cutting angle? The milling head has three cutting edges and a nominal 35° cutting angle for the VBMT seat geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm T-Nut Cutter 10 Teeth 120mm Overall Length, 32mm Shank - Teknik Makina
Take advantage of the combination of precision machining, robust indexable-insert compatibility and simple servicing for reliable T-slot production; order directly via Metav Werkzeuge or consult our specialists for application advice. T-slot cutter TKC064TM — 80 mm diameter, 10-flute cutter by Teknik Makina The T-slot cutter TKC064TM is a dedicated milling tool for creating and maintaining T-slots on metal components, designed for use on milling machines in production and workshop environments. 80 mm diameter for wide T-slots 10-flute geometry for stable cutting Compatible with SPMG 06 inserts 32 mm shank for rigid clamping High productivity through optimised geometry The TKC064TM combines an 80 mm diameter with a 10-flute layout to balance material removal and surface stability, which results in consistent cycle times and reduced rework. The cutter's profile and flute count are selected to limit vibration and ensure a uniform chip flow; this improves tool life and contributes to a predictable process window. For series machining, the design reduces interruptions and supports steady output in repetitive T-slot operations. Servicing and tooling that keep downtime low Designed for indexable inserts, the cutter accepts SPMG 06 style plates and is compatible with inserts from Taegutec, enabling quick replacement without the need for complex reconditioning. The fixing hardware uses a M2.2x5 Torx screw with a T7 key size, allowing fast access with common workshop tools. The modular insert system reduces maintenance time and gives flexibility to choose grades and geometries for specific materials or finishes, improving overall equipment effectiveness. Rigidity and precision for repeatable results A 32 mm shank ensures robust clamping and minimises deflection during heavy cuts, while the 45 mm effective cutting length provides sufficient engagement for most T-slot depths without compromising stiffness. The cutter's 8 mm cutting edge height offers a clear margin for insert support and consistent tooth engagement. These features combine to deliver repeatable slot profiles and tolerances that support downstream assembly and part interfacing. Contact Metav Werkzeuge for technical clarification, sample availability or assistance matching the TKC064TM to a specific production task — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application requirements and delivery options Technical data SKU: TKC064TM Manufacturer: Teknik Makina Diameter: 80 mm Number of flutes: 10 Shank diameter: 32 mm Effective cutting length: 45 mm Cutting edge height: 8 mm Cutting diameter at shank: 31.5 mm Overall length: 120 mm Weight: 0.995 kg For indexable inserts: SPMG 06 Compatible insert manufacturer: Taegutec Fixing screw: M2.2x5 Torx Torx key size: T7 Application: T-slot milling on milling machines FAQ What is the primary application of this cutter? The TKC064TM T-slot cutter is intended for machining and repairing T-slots in metal components on milling machines, providing stable profiles for fixtures and assemblies. Which inserts are recommended for the cutter? Indexable plates in the SPMG 06 format are suitable; the cutter is compatible with inserts offered by Taegutec and similar manufacturers. How is an insert secured and replaced? Inserts are held with an M2.2x5 Torx screw (Torx key T7); the screw system allows rapid insert changes and straightforward maintenance without specialised equipment. Is this cutter suitable for series production? Yes — the combination of a 32 mm shank for rigidity and a 10-flute design supports high repetitive accuracy and reduced vibration in series production environments. What is the product SKU for ordering and reference? Refer to SKU TKC064TM when enquiring about the T-slot cutter or ordering spare inserts and fastening hardware. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm T-Nut Cutter 2 Flute 32mm Shank 24.25mm Cutting Length 3mm Teeth 120mm Overall Length - Teknik Makina
Take advantage of a combination of reliable compatibility with MGM 3C indexable inserts and the stability of a 32 mm shank for consistent T-slot production; the 80 mm cutter diameter and two cutting edges deliver efficient material removal while keeping setup and service straightforward. Order directly via Metav Werkzeuge or ask the consultants for detailed application advice. T-slot cutter – Ø 80 mm, 32 mm shank (Teknik Makina) The T-slot cutter is designed for precise T-slot milling with MGM 3C indexable inserts, suited to workshop tables and fixture machining. 80 mm diameter for wide T-slots Compatible with MGM 3C indexable inserts 32 mm shank for stable clamping High-capacity machining with measurable stability This milling head combines an Ø 80 mm cutting diameter with a 32 mm shank to deliver lateral stability during heavy engagement. The geometry is intended for the reproducible production of T-slots and similar profiles; the robust shank diameter reduces chatter and is suitable for standard collet or hydraulic chucks. Compatibility with established insert systems from Korloy ensures tooling replenishment is straightforward, while the round milling design supports smooth entry and exit at slot ends, resulting in predictable surface quality and dimensional control. Faster cycle times through efficient cutting geometry Equipped with 2 cutting edges and a cutting height of 3 mm, the tool is optimised for productive passes without undue compromise to finish. The use of indexable inserts allows rapid replacement when wear occurs, reducing machine downtime and lowering per-part costs over longer production runs. For operations that prioritise throughput, the combination of a large cutter diameter and effective chip evacuation makes this tool a cost-effective choice for repetitive T-slot work. Built for workshop durability and simple handling The cutter’s 120 mm total length and overall mass of 0.841 kg have been balanced to provide a compact yet robust assembly that is easy to handle during setup. Component tolerances are designed so that clamping forces from a 32 mm shank transmit securely into the spindle, preserving concentricity. The tool’s form supports routine inspections and predictable maintenance cycles, contributing to consistent results across multiple shifts without complex adjustments. Serviceability aligned with common workshop practice Insert clamping is secured with an M8 Torx screw and the specified service key is a 6 mm Allen type, enabling fast insert changes with standard workshop tools. The cutter accepts MGM 3C style inserts and is listed as compatible with Korloy insert grades, which simplifies procurement and tooling management. Together, these design choices reduce setup time and help maintain a regular production rhythm while keeping spare-parts logistics straightforward. Contact Metav Werkzeuge for tailored machining recommendations and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TKC302TM Name: T-slot cutter Manufacturer: Teknik Makina Brand SKU: TKC302TM For indexable inserts: MGM 3C Compatible insert manufacturer: Korloy Core data Diameter: 80 mm Shank diameter: 32 mm Number of cutting edges: 2 Cutting height: 3 mm Total length: 120 mm Weight: 0.841 kg Special features Secured with M8 Torx screw Service with 6 mm Allen key Round milling cutter design For T-slot and profile milling applications FAQ Which insert type is required for the tool? The cutter uses MGM 3C indexable inserts; insert replacement is straightforward and compatible inserts from Korloy are suitable for typical applications. What shank size is needed for secure clamping? A 32 mm shank diameter is specified to provide the required rigidity; standard 32 mm collets or chucks are recommended for clamping. How many cutting edges does the cutter have and what is the cutting height? The tool is fitted with 2 cutting edges and a 3 mm cutting height, balancing material removal rate with surface finish. Is the cutter suitable for heavy-duty T-slot machining? Yes, the combination of Ø 80 mm diameter and a 32 mm shank provides stability for demanding slot work while maintaining control over runout. What tools are needed for insert changes? Insert clamping uses an M8 Torx screw and is serviceable with a 6 mm Allen key for quick replacement on the shop floor. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm T-Nut Cutter for MGMN 300 Indexable Inserts L55mm, 5 Teeth, 3mm Tooth Height - Teknik Makina
Taking advantage of an 80 mm diameter tool with five cutting edges delivers fast, consistent T-slot milling and reduces the number of passes required; benefit from secure clamping via a 28 mm shank and order directly through Metav Werkzeuge or consult our specialists for application advice. T-slot cutter TKC322TM – 80 mm diameter, for MGMN 300 indexable inserts (Teknik Makina) A T-slot cutter TKC322TM engineered for precision T-slot milling with MGMN 300 indexable inserts in industrial and workshop CNC applications. 80 mm diameter for wide T-slots Designed for MGMN 300 indexable inserts 5 cutting edges for efficient material removal 28 mm shank for secure clamping High-capacity cutting that reduces cycle times The wide 80 mm diameter combined with 5 cutting edges allows larger material engagement per pass, shortening cycle times on repetitive T-slot operations. Using indexable inserts means the cutting edge geometry is defined by the insert rather than the body, so each insert change restores original performance without reconditioning the tool body. This setup suits batch production and ensures consistent slot profiles while keeping tool-change procedures simple and predictable. Stable mounting for improved surface finish and tool life A robust 28 mm shank and a compact 55 mm overall length provide excellent rigidity at the cutting zone, which reduces chatter and improves surface finish in T-slot profiles. The solid mounting geometry supports high feed rates while maintaining dimensional stability, translating into fewer rejected parts and longer service intervals. Stable clamping and the cutter’s mass distribution contribute to repeatable results across demanding milling cycles. Compatible insert system and practical workshop benefits The cutter accepts MGMN 300 insert types and is matched for common Korloy insert grades, enabling straightforward procurement and fast replacement. Indexable inserts mean worn edges are exchanged rapidly, offering efficient replacement and lower effective tooling costs per cutting edge. The compact design and standard interface suit a wide range of milling heads, making the tool a pragmatic choice for operations that value uptime and predictable manufacturing tolerances. For Teknik Makina quality with practical supply from Emmerich, contact Metav Werkzeuge for tailored advice and reliable provisioning: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TKC322TM Product type: T-slot cutter Manufacturer: Teknik Makina Label: 80mm T-Nut Fräser MGMN 300 L55mm Core data Diameter: 80 mm Overall length: 55 mm Shank diameter: 28 mm Cutting edges: 5 Cutting edge height: 3 mm Weight: 0.233 kg Thread: 16 Special features Compatible with MGMN 300 indexable inserts Matching insert manufacturer: Korloy SKU: TKC322TM ECLASS: 21180605 FAQ Which insert type is required for this cutter? The cutter is designed for MGMN 300 indexable inserts; Korloy grades are compatible with the TKC322TM configuration. What are the key dimensions to check for machine compatibility? Key dimensions are 80 mm diameter, 55 mm overall length and a 28 mm shank; these figures help determine holder and spindle suitability for the TKC322TM tool. How many cutting edges does the tool have and what is the advantage? The tool features 5 cutting edges, which increases material removal per revolution and allows longer cutting intervals between indexings on the TKC322TM. Is the cutter suitable for high-feed industrial milling? Yes; the combination of a 28 mm shank and short overall length supports high-feed conditions with reduced vibration, making the TKC322TM suitable for industrial milling operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm T-Nut Cutter for RD-- 1003 Indexable Inserts L120mm, 7 Teeth, 22mm Shank - Teknik Makina
Take advantage of the combination of robust cutting capacity and fast insert changes to keep slotting operations efficient and repeatable; the 80 mm cutting diameter and secure 22 mm shank provide stable engagement and consistent results. Order directly via Metav Werkzeuge or request technical advice for integration into production. T-slot cutter for RD-- 1003 indexable inserts — 80 mm diameter, L 120 mm (Teknik Makina) A T-slot cutter for RD-- 1003 indexable inserts engineered for precise slotting in industrial milling and workshop applications. 80 mm cutting diameter 7 cutting edges for smooth engagement Compatible with RD-- 1003 indexable inserts 22 mm shank for secure clamping Faster, more consistent slotting for serial production The combination of an 80 mm cutting diameter and 7 cutting edges reduces the number of passes required to produce a T-slot, increasing throughput while maintaining dimensional tolerances. Higher engagement per revolution delivers a more even load distribution across the cutting edges, which lowers peak forces and helps to stabilise the machining process. This results in shorter cycle times and improved batch reproducibility for serial production runs. Quick insert changes reduce machine downtime Designed around the RD-- 1003 indexable inserts, the cutter enables rapid blade replacement without regrinding, so wear is managed by swap-out rather than complex reconditioning. Fast securing with a T15 Torx driver and the specified M3.5x8.5 fastening screw keeps changeover times predictable and short. The system approach improves tool life economics and simplifies tool inventory management in production environments. Secure clamping for repeatable accuracy A 22 mm shank and an overall length of L 120 mm give the tool the rigidity needed for stable slot formation, while the balanced geometry mitigates vibration and runout. Stable clamping reduces positional drift of the cutter head, which in turn ensures repeatable slot dimensions and cleaner slot walls. The modest mass of the assembly supports controlled acceleration and deceleration in CNC cycles without compromising stability. Built for industrial and workshop flexibility This cutter is tailored to workshop and industrial milling where reliable, indexable tooling is preferred over brazed alternatives. The indexable concept allows consistent cutting performance and straightforward maintenance, making it suitable for job shops and production lines that require a dependable T-slot solution. The tool is compatible with standard insert-based toolholding systems, enabling integration into existing fleets with minimal adaptation. Contact Metav Werkzeuge for tailored technical advice and availability on the Teknik Makina T-slot cutter (SKU TKC182TM), and benefit from local stock and fast delivery from Emmerich. Technical Data SKU: TKC182TM Label: 80mm T-Nut Fräser RD-- 1003 L120mm Manufacturer: Teknik Makina Compatible inserts: RD-- 1003 Core data Diameter: 80 mm Overall length: 120 mm Shank diameter: 22 mm Weight: 0.567 kg Cutting edges: 7 Special features Compatible with RD-- 1003 indexable inserts Fastening: Torx T15 Fastening screw: M3.5x8.5 Product type: T-slot cutter UID: TKC182TM FAQ What insert system does this cutter use? The cutter is built for the RD-- 1003 indexable inserts, enabling quick replacement of worn edges and consistent cutting performance with the defined insert geometry. How many cutting edges are fitted and what is their benefit? The tool features 7 cutting edges, which spread the cutting load to reduce peak forces and deliver smoother engagement during slotting operations. Which shank diameter is required for secure clamping? A 22 mm shank provides the rigidity needed for stable clamping, minimizing vibration and supporting repeatable slot dimensions when the T-slot cutter is used in production. Is the fastening system specialised or standard? Fastening is achieved with a T15 Torx driver and an M3.5x8.5 screw, a reliable combination that permits predictable, quick insert changes on the cutter. What environments is this tool suited to? The cutter is intended for workshop and industrial milling applications where indexable tooling is preferred for its serviceability and process reliability; the T-slot cutter supports repeatable slot production and straightforward tool maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm T-Nut Cutter for RD-- 12 Indexable Inserts L50mm, 22mm Shank - Teknik Makina
Benefit from the combination of a large cutting diameter, a robust 22 mm shank and compatibility with RD--12 indexable inserts to ensure stable, repeatable T-slot milling and uninterrupted production. Order the tool directly via Metav Werkzeuge or consult our specialists for installation and process integration advice. T-slot cutter for RD--12 indexable inserts — 80 mm diameter, 22 mm shank | Teknik Makina A T-slot cutter for RD--12 indexable inserts designed for dependable, high-precision T-slot machining in both jobbing shops and serial production environments 80 mm cutting diameter 22 mm solid shank for stable clamping Compatible with RD--12 indexable inserts Seven cutting edges for efficient removal Reliable stability for precision T-slot machining The cutter’s 80 mm diameter combined with a 22 mm shank provides a rigid tool setup that reduces vibration and run-out during T-slot machining. A stable clamping interface means improved surface finish and extended insert life, which lowers downtime and tool costs. For milling operations where repeatability is critical, the tool’s geometry limits deflection and supports consistent slot dimensions across batches. Fast insert changes and predictable cutting performance Designed for use with RD--12 indexable inserts, the tool offers quick insert replacement and consistent cutting geometry. The head accepts a set of seven cutting edges, enabling balanced material removal and smooth feed behaviour. Insert retention is secured with an M3.5x8.5 Torx screw, tightened with a T15 key, allowing safe, fast maintenance and minimised machine idle time. Indexable inserts deliver a cost-effective route to high productivity without compromising process control. Integrates into existing tooling systems and workflows Weighing 0.546 kg and with a compact 50 mm overall length, the cutter is suitable for close-tolerance setups and standard toolholders. The modest mass helps reduce spindle load while the cutter’s design supports straightforward incorporation into existing fixture and milling programmes. The item is supplied under SKU TKC187TM, making ordering and inventory management simple for purchasing and maintenance teams. Contact Metav Werkzeuge for specification support or to request a quotation for the Teknik Makina T-slot cutter TKC187TM via info@metav-werkzeuge.com or on +49 2822 7131930 Technical data Label: 80mm T-Nut Fräser RD-- 12 L50mm SKU: TKC187TM Manufacturer: Teknik Makina eClass: 21180605 Facts Cutting diameter: 80 mm Overall length: 50 mm Shank diameter: 22 mm Cutting length: 23 mm Weight: 0.546 kg Number of cutting edges: 7 Special features Compatible with RD--12 indexable inserts Torx key: T15 Torx screw: M3.5x8.5 Product type: T-slot cutter UID / Article number: TKC187TM FAQ What insert type does this cutter use? The cutter is designed for RD--12 indexable inserts, offering a standardised insert interface for predictable cutting geometry. How many cutting edges are fitted to the cutter? The tool head carries seven cutting edges, arranged to provide balanced material removal and efficient machining. Which shank diameter is required for clamping? A 22 mm shank diameter provides solid clamping; the cutter is intended for holders that accept this shank size. Is the insert secured with a standard screw type? Yes, inserts are retained with an M3.5x8.5 Torx screw that is tightened using a T15 key for reliable fixation and quick replacement. What is the SKU for ordering and stock management? The item is listed as TKC187TM, which should be used for ordering and inventory purposes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm T-Slot Cutter 10 Teeth, 32mm Shank 45mm Cutting Length, 120mm Overall - Teknik Makina
Take advantage of a robust indexable design and a large Ø80 mm cutting capacity for fast, reproducible T-slot production; the 32 mm shank provides stable clamping while compatibility with SPMG 06 inserts from Taegutec simplifies tooling logistics. Order the cutter directly via Metav Werkzeuge or consult our specialists for process optimisation. T-slot milling cutter TKC058TM – Ø80 mm, 32 mm shank by Teknik Makina The T-slot milling cutter TKC058TM is a purpose-built tool for machining T-slots and grooves on tables and fixtures, combining an indexable-insert system with a sturdy shank for CNC and manual milling applications. Indexable SPMG 06 insert system 80 mm cutting diameter 32 mm shank for secure clamping 10 cutting edges for faster material removal High throughput with consistent slot quality The tool is engineered for short cycle times and repeatable slot geometry. With a Ø80 mm cutting diameter and 10 cutting edges, material removal rates are increased while chip load per tooth is reduced, which improves surface finish and prolongs insert life. The indexable concept with SPMG 06 inserts reduces downtime for tool changes and creates a predictable maintenance rhythm, so production planners can calculate costs and run times with confidence. Secure mounting and rapid insert service Stable clamping is achieved via the 32 mm shank and an overall length of 120 mm, which supports rigid machining and reduces vibration in demanding milling operations. Insert fastening uses a M2,2x5 Torx screw and a T7 key for straightforward replacement and torque control; these familiar components simplify workshop procedures and spare-part management. The cutter’s balanced geometry and specified 45 mm effective cutting length make it suitable for many table and fixture dimensions while keeping set-up times low. Durable construction and straightforward application Designed for repeated industrial use, the tool delivers durability without complexity. The modest weight of 0.944 kg and compact footprint aid handling and tool-change ergonomics on the shop floor. Compatibility with Taegutec indexable inserts ensures access to a wide range of grades for aluminium, steel and general-purpose steels where operators require reliable slot profiles. The indexable system reduces consumable costs compared with solid cutters and supports sustainable workshop practices through longer-lasting cutting edges. For application-specific advice on Teknik Makina’s TKC058TM and tailored supply from Emmerich, contact Metav Werkzeuge by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TKC058TM Manufacturer: Teknik Makina Key measurements Diameter: 80 mm Teeth: 10 Overall length: 120 mm Shank diameter: 32 mm Cutting length: 45 mm Shank cutting diameter: 31.5 mm Cutting height: 6 mm Weight: 0.944 kg Features & compatibility Insert type: SPMG 06 Compatible inserts: Taegutec Fastening: Torx screw M2,2x5 Torx key: T7 Application: T-slot milling and groove machining FAQ Which insert size is required for this cutter? The cutter accepts SPMG 06 indexable inserts; compatible grades are available from Taegutec for a range of materials. What is the shank diameter and why does it matter? The 32 mm shank offers a secure clamping interface that reduces vibration and improves slot accuracy during machining. How many cutting edges are fitted and what is the advantage? The tool has 10 cutting edges, which spreads chip load and increases material removal while improving surface finish. Is the TKC058TM suitable for CNC workstations? Yes. The cutter’s indexable design, balanced geometry and solid shank make it suitable for CNC milling centres and production benches. What fastening hardware is used for the inserts? Insert retention uses M2,2x5 Torx screws tightened with a T7 key for reliable, repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm T-Slot Cutter 2 Flutes 120mm Overall Length 32mm Shank, MGM 5C Compatible - Teknik Makina
Combine the 80 mm cutting diameter, 32 mm shank and compatibility with Korloy MGM 5C inserts to achieve reliable, repeatable T-slot machining; order via Metav Werkzeuge or request technical advice from our consultants for immediate stock and application support. T-slot cutter TKC308TM by Teknik Makina — 80 mm diameter, 32 mm shank The T-slot cutter TKC308TM is a precision round milling cutter designed for producing T-slots and industrial grooves with indexable inserts, ideal for workshop and production environments where repeatability matters 80 mm cutting diameter for robust slotting 32 mm shank for stable toolholding Accepts Korloy MGM 5C indexable inserts M8 torx clamping screw with 6 mm Allen key High productivity through measured rigidity and diameter control The TKC308TM delivers consistent slot geometry by combining an 80 mm cutting diameter with a substantial 32 mm shank, which reduces deflection under load and improves surface quality. In practice, a stiffer shank means fewer reworks and less machine time per part; this measurable gain in process stability supports faster cycle times and predictable quality. The tool’s two cutting edges and defined cutting height ensure efficient material removal while keeping vibration in check, making it suitable where dimensional accuracy of the slot is critical. Quick insert changes and secure clamping reduce downtime Fast, safe insert handling is achieved through compatibility with Korloy MGM 5C indexable inserts and a reliable M8 torx clamping screw. The supplied clamping specification uses a 6 mm Allen key, enabling repeatable torque application and straightforward maintenance routines. Minimising changeover complexity directly improves uptime on the shop floor; the toolholder geometry and accessible screw placement speed up insert replacement and inspection, which is especially valuable in batch production and maintenance schedules. Simple integration with existing tooling and fixtures With an overall length of 120 mm and a shaft-to-cutting-edge distance of 24.25 mm, the cutter integrates cleanly into standard toolholders and setups. The compact weight of 0.86 kg allows predictable tool balancing and limits spindle load, which helps preserve both the cutter and the machine spindle. These measured attributes make the cutter a pragmatic choice for workshops seeking performance without complex retrofit work: install, set the correct runout tolerances and begin milling precise T-slots. Built for repeatability and shop-floor reliability The mechanical design focuses on repeatable clamping and consistent cutting geometry, supporting long production runs with minimal variation. The cutter’s cutting height of 5 mm and dual-edge configuration maintain a stable chip formation regime, which lowers the chance of edge chipping and supports a reliable surface finish across parts. Backed by Metav’s emphasis on accessible precision, this tool suits maintenance and production teams aiming to reduce supplier complexity while keeping measurement and process integrity at the forefront. Contact Metav Werkzeuge for a specification review or sample availability for the Teknik Cutting Tools T-slot cutter TKC308TM — our technical advisers in Emmerich provide direct guidance on suitability and stocking options Technical data SKU: TKC308TM Brand: Teknik Makina Product name: T-slot cutter TKC308TM Diameter: 80 mm Shank diameter: 32 mm Cutting-edge spacing (shaft to edge): 24.25 mm Cutting height: 5 mm Overall length: 120 mm Cutting edges: 2 Weight: 0.86 kg Suitable for Korloy inserts Compatible insert type: MGM 5C Clamping screw: M8 torx Required key: 6 mm Allen key Tool style: round milling cutter FAQ Which indexable inserts are compatible with this cutter? The TKC308TM accepts Korloy MGM 5C inserts; this compatibility ensures straightforward replacement and access to a wide range of insert grades for different finishes. What are the key dimensions to check before mounting? Important dimensions include the 80 mm diameter, 32 mm shank, 120 mm overall length and the 24.25 mm distance from shaft to cutting edge; these values are essential for toolholder selection and setting correct tool offsets. How is the insert secured and what tool is required? Each insert is secured with an M8 torx clamping screw; a 6 mm Allen key is specified for torqueing and repeatable clamping during insert changes. Is the cutter suitable for high-volume production? The cutter’s robust 32 mm shank, measured geometry and dual cutting edges are designed to support repeatable runs and quick insert changes, making it appropriate for regular production use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm T-Slot Cutter 2-Flute 32mm Shank 120mm Overall Length, Compatible with MGM 4C - Teknik Makina
Take advantage of precise T‑slot milling with an 80 mm diameter head, a robust 32 mm shank and a cartridge-style insert system for fast changeovers; order the tool or request advice from Metav Werkzeuge for a reliable workshop supply solution. T-slot cutter TKC305TM — 80 mm diameter, for MGM 4C indexable inserts (Teknik Makina) A T-slot cutter TKC305TM intended for industrial slot milling, designed to accept MGM 4C indexable inserts and to integrate with standard toolholders. 80 mm cutting diameter 32 mm shank for secure clamping Compatible with MGM 4C inserts Engineered for efficient T‑slot production The tool is built around an 80 mm cutting diameter and a 32 mm shank, which together ensure stable metal removal and consistent slot geometry. The moderate mass of 0.86 kg reduces inertia during rapid tool changes while still delivering the rigidity required for repetitive machining. With two cutting edges and a cutting height of 4 mm, the cutter balances material removal rate and surface finish, making it suitable where repeatable, precise T‑slots are required. The design reduces set-up iterations and contributes to a leaner production flow by shortening downtime between operations. Indexable insert system for rapid maintenance The cutter accepts MGM 4C indexable inserts and is compatible with inserts from Korloy, enabling rapid regrinds or replacements without removing the entire toolholder. Securing is handled via an M8 torx screw and a 6 mm hex key, which keeps insert changes straightforward and repeatable. The two‑edge configuration lowers tooling costs compared with solid cutters, because worn edges are rotated or replaced rather than discarding the whole head. For operations focused on uptime and predictable consumable spend, this insert system delivers measurable savings and simplifies tooling logistics. Practical dimensions for reliable workshop integration With an overall length of 120 mm and an effective distance from cutting edge to shank of 24.25 mm, the cutter fits common arbors and allows for compact setup in milling heads or arbors designed for indexable tooling. The 32 mm shank facilitates secure clamping and reduces the likelihood of runout when used with matching collets or shrink-fit holders. The compact overall envelope combined with a two‑edge geometry is intended to reduce vibration and improve surface integrity in the slot, which helps to cut rework and inspection time on downstream processes. Performance and procurement considerations for production use Designed for repetitive slotting tasks, the cutter is a rational choice where process stability and cost control are priorities. The indexable insert concept, compatible supplier options and standard clamping hardware make it straightforward to adopt in existing tool repertoires. Metav Werkzeuge supplies the tool with a focus on dependable delivery from Emmerich, offering a pragmatic route to secure supplies and maintain production continuity. For workshops aiming to reduce the number of single‑use cutters, this solution supports longer tool life cycles and easier inventory management. Contact Metav Werkzeuge in Emmerich for a procurement consultation or technical clarification on the TKC305TM T‑slot cutter; phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: TKC305TM Manufacturer: Teknik Makina Brand: Teknik Makina SKU: TKC305TM Facts Diameter: 80 mm Shank diameter: 32 mm Overall length: 120 mm Cutting edges: 2 Cutting height: 4 mm Cutting edge to shank distance: 24.25 mm Weight: 0.86 kg Special features Compatible with MGM 4C indexable inserts Korloy insert compatibility Torx screw: M8 Tool key: 6 mm Allen Story trigger: round milling cutter FAQ What inserts fit the cutter? The cutter accepts MGM 4C indexable inserts and is compatible with Korloy insert types specified for this system; use inserts matching the MGM 4C geometry for correct seating. What are the key dimensions for holder selection? Shank diameter is 32 mm and overall length is 120 mm; ensure the arbor or holder accepts a 32 mm shank for the correct fit with the TKC305TM. How many cutting edges does the tool have and what is the cutting height? The tool is configured with 2 cutting edges and a cutting height of 4 mm, which balances material removal and surface finish for T‑slot applications. Which fastening hardware is used for the inserts? Insert retention is via an M8 torx screw, tightened with a 6 mm hex key as supplied or specified for maintenance. Is the cutter suitable for repeatable series production? Yes — the indexable insert system and robust 32 mm shank make the cutter suitable for repetitive T‑slot production where quick insert changes and consistent slot geometry are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm T-Slot Cutter 31.5mm Cutting Diameter 45mm Cutter Length, SPMG 07 Compatible - Teknik Makina
Efficient T‑slot production through stable 80 mm cutting diameter and quick insert changes with Taegutec SPMG 07 compatibility; order directly via Metav Werkzeuge or consult our specialists for holder recommendations T-Nut Fräser TKC070TM — 80 mm diameter, 10 mm cutting height (Teknik Makina) T-Nut Fräser TKC070TM is a robust T‑slot milling cutter designed for precision slotting and T‑nut profiles in CNC machining centres 80 mm cutting diameter 10 mm cutting height 32 mm shank diameter Compatible with SPMG 07 inserts by Taegutec Faster, more predictable T‑slot machining for series production The TKC070TM cutter is engineered to shorten cycle times while maintaining consistent slot geometry. With an 80 mm diameter and 10 mm cutting height, the tool removes material efficiently and reduces the number of passes required for many T‑slot profiles. The high tooth count (10 cutting edges) spreads chip load and lowers vibration, which translates into improved surface finish and repeatability on the machine, making the cutter particularly suitable for batch production where process stability and throughput are priorities. Low tooling cost and rapid maintenance with indexable inserts This T‑slot cutter uses SPMG 07 indexable inserts, compatible with Taegutec standards, so insert replacement is fast and cost‑effective. The insert clamping is secured via an M2.5x7 Torx screw (Torx key T8), enabling quick downtime recovery and straightforward maintenance procedures. Replacing worn inserts instead of regrinding bodies keeps overall tooling investment down and preserves cutter geometry, which minimises scrap and lowers total cost per part in medium to long runs. Secure interface and workshop integration for reliable results A 32 mm shank diameter and an overall length of 120 mm provide a stiff connection to the spindle or toolholder, reducing deflection during heavy cuts. The tool’s cutting portion (shaft cutting length 45 mm; cutting shank diameter 31.5 mm) and near 1 kg mass (0.994 kg) contribute to stable rotational behaviour and predictable cutting forces. These characteristics simplify holder selection and balancing on CNC machines, enabling planned feeds and speeds that support repeatable accuracy and longer insert life. Discuss Teknik Cutting Tools' TKC070TM with Metav Werkzeuge to optimise holder selection and delivery from Emmerich for fast integration into production Technical Data Article number: TKC070TM Manufacturer: Teknik Makina Designation: T-slot cutter SKU: TKC070TM Facts Diameter: 80 mm Cutting height: 10 mm Shank diameter: 32 mm Cutting length (shaft): 45 mm Cutting shank diameter: 31.5 mm Overall length: 120 mm Number of cutting edges: 10 Weight: 0.994 kg Special features Compatible with SPMG 07 indexable inserts Insert manufacturer compatibility: Taegutec Torx screw M2.5x7 for insert clamping Torx key size: T8 Designed for T‑slot and T‑nut profile milling FAQ What insert type does the cutter require? The TKC070TM accepts SPMG 07 indexable inserts; these are used with the cutter body and are compatible with Taegutec insert geometries. How is an insert secured to the cutter? Inserts are clamped with an M2.5x7 Torx screw; a T8 Torx key is used for tightening and replacement. What are the key dimensions for machine integration? Primary dimensions include an 80 mm cutting diameter, 32 mm shank diameter and 120 mm overall length as listed for the TKC070TM. Can the cutter be balanced for high‑speed machining? The cutter’s mass (0.994 kg) and shank geometry support stable rotation; balancing should be performed according to the machine and holder specifications for high‑speed applications. Which manufacturer makes this tool and who supplies it? The tool is produced by Teknik Cutting Tools and distributed via Metav Werkzeuge under SKU TKC070TM for European supply chains Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm T-Slot Cutter CCMT 0602 Inserts, 9mm Cutting Height, 32mm Shank - Teknik Makina
Benefit from the combination of sturdy indexable-insert compatibility, a large Ø80 mm cutter diameter and a robust 32 mm shaft for reliable T-slot production; order the tool directly via Metav Werkzeuge or ask our consultants if needed. T-slot cutter TKC122TM — Ø80 mm, for CCMT 0602 inserts (Teknik Makina) The T-slot cutter TKC122TM is a purpose-built milling tool for precise production of T-slots in machining centres and milling machines, offering stable engagement and quick insert changes. Ø80 mm cutter diameter for robust material removal Compatible with CCMT 0602 indexable inserts 32 mm shaft diameter with 32 mm cutting length Ten cutting edges for smooth chip evacuation Increased throughput through optimised geometry The cutter's large Ø80 mm diameter and multiple cutting edges deliver a higher material removal rate while preserving component integrity. Fitted for CCMT 0602 indexable inserts, the tool is configured for quick insert replacement and consistent performance on repeated runs. The multi-edge layout reduces individual insert load, which in turn lowers thermal stress and prolongs service intervals. For production environments seeking steady cycle times, the combination of diameter and insert system supports improved efficiency without complex set-up changes. Rigidity and vibration control for improved surface quality A robust 32 mm shaft and an overall length of 120 mm provide the mechanical stiffness required for demanding milling operations. The shaft dimensions are matched to the cutter body so that radial runout is minimised and chatter is suppressed; as a result, surface finishes and slot tolerances are maintained across batch production. The tool mass of 1.025 kg contributes to stable cutting dynamics, and the defined 9 mm cutting height keeps engagement predictable for precise slot profiles. Fast maintenance with standardised fastening The indexable-insert concept allows worn edges to be renewed in moments rather than replacing the entire cutter. Inserts are secured with M2.5x5.5 Torx screws and a T8 key, enabling rapid, repeatable clamping during tool service. This arrangement supports lean workshop routines: insert changes and inspections are carried out quickly, downtime is reduced, and tool life is maximised by restoring cutting geometry rather than discarding components. Application-focused design for reliable T-slot machining Engineered specifically for T-slot creation, the cutter's profile and ten cutting edges are intended to produce uniform slot flanks and clear chip channels. The use of indexable inserts ensures that cutting edges can be rotated or replaced to maintain cutting performance, making the tool suitable for repeated, high-volume operations where consistent slot geometry is required. The tool is supplied ready for mounting and intended for use in standard milling spindles that accept a 32 mm shaft. For reliable T-slot production with Teknik Makina’s TKC122TM, contact Metav Werkzeuge in Emmerich for technical advice and direct supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TKC122TM Manufacturer: Teknik Makina Product name: T-slot cutter Key measurements Diameter: 80 mm Cutting edges: 10 Overall length: 120 mm Shaft diameter: 32 mm Shaft cutting diameter: 31.5 mm Cutting length (shaft): 32 mm Cutting height: 9 mm Weight: 1.025 kg Features For indexable inserts: CCMT 0602 Torx screw: M2.5x5.5 Torx key: T8 SKU: TKC122TM FAQ What inserts are compatible with this cutter? The cutter is designed for CCMT 0602 indexable inserts; the TKC122TM accepts these inserts for straightforward edge replacement. How is the insert secured in the cutter? Inserts are fixed with M2.5x5.5 Torx screws using a T8 key, allowing quick and repeatable clamping during maintenance. What are the key dimensions that affect machine setup? Relevant dimensions include the Ø80 mm cutter diameter, 32 mm shaft diameter and overall length of 120 mm; these determine spindle compatibility and overhang. How many cutting edges does the tool have and what is the benefit? The tool has ten cutting edges, which distributes cutting forces and aids smooth chip evacuation for stable cutting performance. Is the cutter suitable for series production? Yes — the indexable-insert design and robust shaft geometry of the TKC122TM support repeated production runs with minimal downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Reduce downtime with reliable internal-coolant t-slot cutters
A t-slot cutter is engineered to produce the wider, undercut section of a T-shaped slot commonly used in machine tables, workholding plates and industrial fixtures, while its shank runs through a previously made, narrower guide groove. Where external machine nozzles spray coolant from outside, machining of enclosed T-slots can leave the cutting edges starved of lubricant and the chips trapped; this increases heat, tool wear and the risk of sudden breakage. T-slot cutters with internal coolant avoid these issues by routing cooling fluid through deep shaft channels directly to the cutting edges.
How the tool works and where it is indispensable
The cutter is designed so that the enclosed cutting zone receives coolant under pressure via internal bores, which flush chips out of the narrow, enclosed cavity and remove process heat at the hidden engagement point. This technical design is especially necessary for t-slot milling operations in heavy-duty clamping plates, machine tables and fixtures where the tool is largely surrounded by material and external coolant cannot reach the cutting edges reliably.
Key operational benefits you can expect
- improved tool life through targeted cooling at the cutting edge
- consistent chip evacuation thanks to high-pressure internal coolant flow
- reduced risk of tool breakage by avoiding chip jamming and thermal overload
- better dimensional accuracy because heat and swarf are controlled at the source
- fewer rejects and less rework, increasing throughput in production
Metav as your practical partner for procurement and advice
Metav acts as a precision partner that makes high-accuracy tooling accessible for workshops and industry. From our Emmerich base we combine decades of expertise with a broad range of solutions, supported by over 48,000 customers and more than 250,000 products. For buyers seeking reliable supply and pragmatic technical guidance, Metav provides straightforward advice on selecting the right t-slot cutter or t-nut cutter and can clarify compatibility with existing setups.
FAQ
What is the main advantage of a t-slot cutter with internal coolant compared with external cooling?
A t-slot cutter with internal coolant delivers the coolant directly to the cutting edges through internal bores and channels, which is essential because the cutter works deeply and is largely enclosed by material; this prevents the coolant starvation and chip entrapment that commonly occur when external machine nozzles are used.
In which situations is a t-slot cutter absolutely required?
t-slot cutters are required for milling the undercut portion of T-shaped slots in machine tables, workholding plates and industrial fixtures where reliable chip evacuation and heat removal at the hidden engagement point are critical to prevent tool failure.
How does internal coolant affect chip removal and tool safety?
Internal coolant provides a strong flushing action that carries chips out of the narrow cavity, preventing chip jamming, avoiding overcutting on residual swarf and significantly reducing the likelihood of sudden tool breakage due to overload.
Can Metav advise on choosing the right t-slot milling cutter for a specific clamping system?
Yes. Metav’s technical team can advise on selecting the appropriate t-slot cutter or t-nut cutter for your machine table or fixture configuration and explain how internal coolant channels and shank guidance will interact with your existing guide groove.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com