Precise T-slot cutters for reliable fixture machining
T-slot cutters are engineered to produce the undercut head of a T-shaped slot in machine tables and fixture plates, providing secure, adjustable clamping for workpieces while the cutter shaft runs in a pre-machined guide. Using cutters with internal coolant channels ensures consistent delivery of high-pressure coolant directly to the cutting edges, which effectively removes chips from the enclosed cutting zone and dissipates process heat to prevent chip jamming and tool breakage. These tools are essential when machining hardened or long-duration setups where external coolant is ineffective, offering improved tool life, repeatable slot geometry and reduced downtime through reliable chip evacuation. The category also covers matching variants and complementary tooling such as twist drill adapters and precision caliper-referenced setups for precise positioning.
50mm T-Slot Cutter 2 Flute 25mm Shank 4mm Cutting Height 120mm - Teknik Makina
Benefit from a robust, indexable design that combines a 50 mm cutting diameter with a 25 mm shank for stable clamping and precise slot profiles; the tool accepts MGM 4C indexable inserts for fast changeovers. Order via Metav Werkzeuge or consult our specialists for setup recommendations. T-slot cutter TKC303TM — 50 mm diameter, two cutting edges · Teknik Makina The T-slot cutter TKC303TM is an indexable T-slot milling cutter designed for precise slotting in fixtures, machine tables and profile systems. 50 mm cutting diameter for deep T-slots 25 mm shank ensures rigid clamping Accepts MGM 4C indexable inserts (Korloy) Two cutting edges for efficient material removal Accurate slot profiles with indexable inserts for consistent output The TKC303TM delivers repeatable results through its indexable inserts concept. Using replaceable MGM 4C inserts from Korloy reduces downtime compared with solid tools: worn edges are swapped without removing the toolholder, shortening cycle interruptions. The combination of a wide cutting diameter and a two-edge geometry yields stable cutting forces and predictable chip formation, which contributes directly to improved surface finish and dimensional conformity in batch production. Rigid shank and geometry that stabilise machining A 25 mm shank and a balanced tool body length provide the rigidity required for accurate slotting operations. With a 120 mm overall length and a cutting height 4 mm, the cutter maintains concentricity and reduces chatter when clamped correctly, resulting in lower rework rates. The measured distance from cutting edge to shank (12.75 mm) helps planners assess reach and clamping overlap for fixture design, making the tool suited to integrated fixtures where stability is paramount rather than long overhangs. Practical workflow integration and low-maintenance handling The indexable design and compatibility with standard insert geometries simplify inventory: stock the MGM 4C inserts instead of multiple full-diameter cutters. Fast securing via an M8 clamping screw and an Allen key reduces changeover time at the machine, while the two-edge configuration balances material removal and tool life for routine production cycles. This cutter is positioned for operations that favour predictable throughput, minimal setup complexity and straightforward in-shop maintenance. For tailored tooling recommendations and to arrange supply from our Emmerich hub for the Teknik Makina TKC303TM, contact Metav Werkzeuge by phone or e‑mail for specialist advice and delivery planning Technical data SKU: TKC303TM Name: T-slot cutter (T-Nut Fräser) Manufacturer: Teknik Makina Brand: Teknik Cutting Tools Weight: 0.536 kg Insert type: MGM 4C Compatible insert manufacturer: Korloy Clamping screw: M8 Wrench/key: 6 mm Allen Facts Diameter: 50 mm Shank diameter: 25 mm Number of cutting edges: 2 Overall length: 120 mm Cutting height: 4 mm Distance cutting edge to shank: 12.75 mm Weight: 0.536 kg Special features Indexable insert system (MGM 4C) Compatible with Korloy insert geometries Round milling cutter body Secured with M8 clamping screw and 6 mm Allen key FAQ Which inserts are compatible with this cutter? The TKC303TM accepts MGM 4C indexable inserts and is designed to work with Korloy insert geometries. What are the key dimensions and securing method? The TKC303TM has a 50 mm diameter, 25 mm shank, 120 mm overall length and a 4 mm cutting height; inserts are fixed with an M8 clamping screw using a 6 mm Allen key. How many cutting edges does the tool have and what is the benefit? Equipped with two cutting edges, the tool balances efficient material removal with smooth slot walls, supporting repeatable cycle times with the TKC303TM. Can the cutter be used with standard 25 mm tool holders? The 25 mm shank of the TKC303TM is compatible with holders and collets sized for 25 mm shafts; verification of holder specs is recommended prior to use. What maintenance is recommended for long life? Regular inspection of insert condition and secure clamping of the M8 screw keeps the TKC303TM serviceable; replace worn inserts promptly to maintain slot quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm T-Slot Cutter 5 Flutes 100mm Overall Length 25mm Shank M3.5 Lock Screw - Teknik Makina
Take advantage of precise T-slot production with a 50 mm diameter cutter and a 25 mm shank that keeps set-up fast and stable; the indexable RHKW 1003 inserts deliver efficient material removal and predictable tool costs. Order directly via Metav Werkzeuge or consult our specialists for cutting data and compatibility advice. T-slot milling cutter TKC202TM — 50 mm diameter, 25 mm shank (Teknik Makina) The T-slot milling cutter TKC202TM is an indexable-insert tool designed for producing accurate T-slots in machine tables, fixtures and profile systems within CNC and workshop environments 50 mm diameter for deep T-slots 25 mm shank for secure clamping Quick indexable insert change with Torx T15 Compatible with Ingersoll RHKW 1003 inserts High-precision slotting with efficient set-up The cutter combines a 50 mm diameter cutting head with five active flutes to create true T-slot profiles with consistent geometry. Using indexable inserts rather than solid cutters reduces per-edge cost and simplifies maintenance: worn edges are replaced, not the whole tool. The compatible RHKW 1003 insert format is common in industry, so insert stocking is straightforward and repeatable machining tolerances are easier to achieve. Fast insert changes reduce production downtime Designed for rapid maintenance, the tool uses a Torx T15 interface for the main fastenings and a M4x10 Torx screw for secure insert clamping; the primary locking is managed via an M3.5 locking screw. These standard fasteners allow quick, safe insert replacement with minimal operator training and no complex torque devices. The result is less machine downtime, faster shift handovers and a simplified tool-change routine on the shop floor. Robust shank and compact form for reliable clamping A 25 mm shank diameter provides solid engagement in standard collets and toolholders, keeping run-out low during heavy cuts. The cutter’s 100 mm overall length and balanced mass (approx. 0.284 kg) make it suitable for both small CNC milling centres and larger production machines alike. Compatibility with Ingersoll insert geometries ensures interchangeability with established indexable systems and helps reduce tooling variants in the tooling cabinet. Practical benefits for machining operations With five cutting edges, this cutter achieves stable chip formation and consistent slot profiles, which benefits repeatable assembly and fixturing accuracy. Selection of appropriate cutting parameters and coolant strategy will define surface quality and tool life; for guidance on optimal feed rates and speeds for specific materials, Metav specialists can provide application-oriented recommendations. The TKC202TM’s modular approach to inserts keeps lifecycle costs under control while ensuring predictable production output. Discuss machining requirements and secure shipment from Metav Werkzeuge for the Teknik Makina TKC202TM — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TKC202TM Manufacturer: Teknik Makina Product name: T-slot milling cutter Core data Diameter: 50 mm Shank diameter: 25 mm Overall length: 100 mm Cutting edges: 5 Weight: 0.284 kg Special features Suitable for indexable inserts RHKW 1003 Compatible with Ingersoll insert systems Torx screw M4x10 for insert clamp Torx key size T15 M3.5 locking screw FAQ Which inserts fit this cutter? The TKC202TM accepts indexable inserts in the RHKW 1003 format; compatibility with Ingersoll-type inserts is specified for standard fit and repeatability. How many cutting edges does the cutter have? The tool is built with five active cutting edges, providing steady chip evacuation and smooth slot geometry. What shank diameter is required for toolholding? A 25 mm shank is provided, designed for secure clamping in common collets and holders used on CNC milling machines. What fasteners are used for insert clamping? Insert clamping uses a M4x10 Torx screw with a Torx T15 interface; the tool also includes an M3.5 locking screw for secure retention. Is the cutter suitable for production environments? Yes — the TKC202TM’s indexable design, standard fasteners and 25 mm shank make it well suited to repeated production work and quick tooling changes Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No: 9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm T-Slot Cutter 6 Flutes 120mm Overall Length, 32mm Shank - Teknik Makina
Take advantage of a compact solution that pairs 50 mm cutting capacity with secure clamping via a 32 mm shank, and benefits from straightforward insert changes for continuous shop-floor productivity — order the tool directly via Metav Werkzeuge or contact our consultants for application advice. T-slot cutter TKC060TM — 50 mm diameter, 32 mm shank (Teknik Makina) The T-slot cutter TKC060TM is a robust milling tool designed for efficient production and maintenance of T‑slots in workshop environments, combining a compact overall length with indexable‑insert convenience 50 mm cutting diameter for deep T‑slots Compatible with SPMG 06 indexable inserts 32 mm shank for high clamping rigidity Quick insert fastening with M2.2x5 Torx screws Precision and rigid clamping for repeatable slots The cutter delivers consistent geometry thanks to its 50 mm nominal diameter and 6 cutting edges, which are arranged to produce clean, repeatable T‑slot profiles. The combination of a 32 mm shank and a 120 mm overall length offers a balance between accessibility and stability; the substantial shank diameter reduces deflection and run‑out, which preserves profile accuracy in serial machining. With a 45 mm cutting length and a cutting height of 8 mm, the tool is dimensioned to create deep T‑slots while maintaining cutter life and process reliability. Operators and process engineers will recognise the benefit of a tool that prioritises dimensional control over long production runs. Reduce downtime with indexable‑insert efficiency This cutter uses SPMG 06 indexable inserts, making edge replacement rapid and economic. Asserts of insert technology mean that only the insert needs replacement when wear occurs, avoiding the need to change the entire cutter body and minimising downtime. The insert pockets are secured with M2.2x5 Torx screws, tightened with a T7 key, which standardises the maintenance routine and shortens service intervals. Compatibility with Taegutec‑style inserts broadens sourcing options for spare parts, supporting lean inventory management and predictable tool‑cost planning for production managers. Simple integration into existing tool systems Installation is straightforward: the 32 mm shank fits conventional toolholders and collets rated for that diameter, and the cutter’s 0.839 kg mass helps preserve balance across typical spindle speeds used for slotting operations. The cutter’s geometry and insert format allow it to be slotted into established tool assemblies without extensive modification, while the rugged design supports repeated indexing cycles. For quieter changeovers and reliable torque transmission during mounting, standard workshop torque practices are recommended and routine inspection of the Torx screws keeps the system secure. The overall design focuses on ease of integration for maintenance, retrofit, or new‑build machining cells. For dependable T‑slot machining with Teknik Makina quality, contact Metav Werkzeuge for tailored technical advice or to secure the TKC060TM for the production line — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TKC060TM Manufacturer: Teknik Makina Diameter: 50 mm Shank diameter: 32 mm Shank cutting length: 45 mm Cutting diameter (shank): 31.5 mm Cutting height: 8 mm Number of cutting edges: 6 Overall length: 120 mm Weight: 0.839 kg Indexable insert type: SPMG 06 Compatible insert manufacturer: Taegutec Insert fastening: M2.2x5 Torx screws Torx key required: T7 Suitable for indexable‑insert milling FAQ Which insert type fits this cutter? The TKC060TM accepts SPMG 06 indexable inserts; the pocket is compatible with inserts from Taegutec. What are the key dimensions for mounting? The cutter has a 32 mm shank and a 120 mm overall length; holders and collets should be specified for a 32 mm shaft. How are the inserts secured and serviced? Inserts are fastened with M2.2x5 Torx screws, serviced using a T7 key for straightforward replacement. What cutting geometry does the tool provide? The tool offers a 50 mm cutting diameter, 6 cutting edges, a 45 mm cutting length and an 8 mm cutting height for deep T‑slot profiles. Is balancing recommended for high‑speed use? For high spindle speeds, balancing is recommended; the cutter mass (approx. 0.839 kg) and its length should be considered when setting up the spindle assembly. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm T-Slot Cutter 7 Teeth 120mm Total Length, 32mm Shank - Teknik Makina
Take advantage of a robust, indexable‑insert system and a rigid 32 mm shank for stable, repeatable T‑slot machining; combine efficiency, precision and straightforward insert changes to keep production running smoothly — order directly via Metav Werkzeuge or consult our specialists for application advice. Teknik Makina T‑slot cutter, 50 mm diameter, SPMG 06 compatible T‑slot cutter for machining T‑shaped slots and profiles in production and tooling environments, designed for quick insert replacement and high rigidity. 50 mm diameter for deep T‑slots Compatible with SPMG 06 inserts 32 mm shank for rigid clamping Consistent slot accuracy for repeatable production The cutter’s geometry and seven cutting edges deliver a balanced material removal rate that supports consistent slot dimensions across batches. With a 50 mm diameter and a cutting height of 6 mm, the tool is configured to maintain slot form while limiting vibration; this reduces rework and shortens downstream finishing. The result is a reliable machining process that helps control tolerances and improves throughput without excessive tool changes. Stable machining through rigid clamping and optimised length A 32 mm shank and overall length of 120 mm provide the stiffness needed for stable milling even under higher cutting forces. The shank‑to‑cutting length ratio, together with a 31.5 mm cutting shank diameter, lowers deflection and improves surface quality, which is especially important when T‑slots must mate precisely with bolts or sliding fixtures. The cutter’s mass (0.833 kg) contributes to damping, producing a cleaner finish and reducing the chance of chatter on standard CNC milling setups. Fast insert changes and serviceable design This cutter uses SPMG 06 indexable inserts, compatible with inserts from Taegutec, enabling quick index changes and flexible edge selection for different materials and finishes. Insert retention is secured with a M2.2x5 Torx screw and a T7 key specification, allowing service staff to replace or rotate inserts with common workshop tools. The indexable system reduces consumable costs and downtime compared with brazed solutions, making it a practical choice for busy job shops. Application fit and operational benefits Designed within the cutting tools and CNC domain, this milling tool suits fixture and machine‑table T‑slot creation as well as component profiling where a T‑shaped groove is required. Compatibility with industry‑standard insert formats simplifies procurement and inventory, while the tool’s balanced design supports higher material removal rates without sacrificing precision. Choose this cutter when stability and quick serviceability are priorities in repetitive or batch production. For dependable T‑slot machining with Teknik Makina quality, contact Metav Werkzeuge in Emmerich for ordering and tailored technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TKC054TM Manufacturer: Teknik Makina ECLASS: 21180605 ETIM: EC011860 Weight: 0.833 kg Facts Diameter: 50 mm Overall length: 120 mm Cutting edges: 7 Cutting height: 6 mm Shank diameter: 32 mm Shank cutting length: 45 mm Shank cutting diameter: 31.5 mm Special features Indexable insert system SPMG 06 Compatible with Taegutec inserts Torx screw M2.2x5 for insert fastening Torx key size T7 Designed for T‑slot machining FAQ What insert type does the cutter use? The cutter uses SPMG 06 indexable inserts; Taegutec inserts are listed as compatible for this tool (SKU TKC054TM). How does the shank diameter affect performance? A 32 mm shank increases rigidity during milling, which improves surface finish and reduces deflection when machining T‑slots with this cutter. How many cutting edges are on the tool and what is the benefit? The tool has seven cutting edges; this configuration supports balanced cutting action and helps maintain slot geometry across production runs. Is the tool suitable for quick insert replacement in a shop environment? Yes — insert retention is via an M2.2x5 Torx screw requiring a T7 key, enabling fast service and minimal downtime. What is the overall length and how does it influence setup? The overall length is 120 mm, a dimension that balances accessibility and stiffness for most CNC milling set‑ups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm T-Slot Cutter CCMT 1204 Inserts 4-Flute 110mm, 32mm Shank - Teknik Makina
Efficient T-slot milling is achieved with the combination of a 50 mm cutting diameter and four cutting edges, delivering stable material removal and consistent groove geometry; the shaft Ø 32 mm ensures rigid clamping for repeatable results. Order the cutter directly via Metav Werkzeuge or consult our specialists for application support. T-Nut Cutter TKC108TM – Indexable T-slot milling cutter, Ø 50 mm, Teknik Makina The T-Nut Cutter TKC108TM provides precise T-slot machining with indexable CCMT 1204 inserts, designed for workshop and production milling tasks Ø 50 mm cutting diameter Compatible with CCMT 1204 inserts Shaft Ø 32 mm for rigid clamping Four cutting edges for balanced cutting Increase throughput with reliable cutting geometry The large Ø50 mm cutter body combined with four cutting edges permits steady chip removal and reduced vibration, which translates into shorter cycle times and improved surface quality on the machined slot. With support for indexable inserts the tool enables rapid insert changes, lowering downtime compared with brazed or monolithic cutters. The modular concept of insert-based cutters means maintenance is limited to replacing worn CCMT 1204 inserts and the securing screw, keeping production flowing while maintaining dimensional consistency across batches. Fast set-up and secure clamping for repeatable results A robust shaft Ø 32 mm provides secure clamping in standard toolholders, increasing torsional stability during high-feed operations. The cutter’s 110 mm overall length gives adequate reach for common T-slot depths without excessive overhang, while a cutting length of 50 mm offers sufficient engagement for profiling wider slots. Insert retention is handled by an M5x12 Torx screw, tightened with a T20 key, ensuring simple and reliable assembly. These design choices reduce set-up time and help achieve the same tool datum from one shift to the next. Durable construction aimed at consistent production quality The TKC108TM’s balance between body mass and cutting geometry supports consistent machining forces; the tool mass of 0.691 kg contributes to steady cutting dynamics and lowers chatter risk in many milling set-ups. The tool’s compatibility with widely available CCMT 1204 indexable inserts offers a cost-effective route to maintain sharp cutting edges: wear can be addressed by rotating or replacing individual inserts rather than changing the entire cutter. The combination of balanced cutting and replaceable inserts reduces scrap rates and supports a predictable production schedule. Practical workshop guidance and application notes For reliable results, verify holder compatibility with the shaft Ø 32 mm and ensure correct torque on the M5x12 Torx screw using a T20 key to secure each insert. Regular inspection of insert seating and the screw thread will prevent unplanned stoppages. For varied materials, select the appropriate CCMT grade to match hardness and cutting conditions; the indexable system makes grade swaps straightforward. If uncertainty remains about suitability for a specific task, technical advice is available through Metav Werkzeuge to assist with tool selection and process parameters. For precise and dependable T-slot production request the Teknik Makina TKC108TM through Metav Werkzeuge or contact our consultants at Metav Werkzeuge for tailored machining advice Technical Data Article number: TKC108TM Manufacturer: Teknik Makina Designation: T-Nut Cutter Compatible inserts: CCMT 1204 Torx screw: M5x12 Torx key: T20 Key Facts Cutting diameter: 50 mm Number of cutting edges: 4 Shaft diameter: 32 mm Cutting length: 50 mm Cutting height: 20 mm Overall length: 110 mm Weight: 0.691 kg Special features Indexable insert system Balanced four-edge geometry Secure insert fixation with Torx screw Designed for repeatable T-slot machining FAQ Which inserts fit this cutter? The cutter accepts CCMT 1204 indexable inserts; the TKC108TM is configured for these standard carbide inserts to allow rapid replacement and varied cutting grades. What shaft diameter does the tool require for clamping? Clamping requires a holder compatible with a shaft Ø 32 mm, matching the cutter’s shaft for rigid and stable mounting. How many cutting edges are provided and what is the benefit? The tool has four cutting edges, providing balanced cutting forces and steady chip evacuation for consistent slot geometry. What is the overall length and typical reach for the cutter? Overall length is 110 mm, offering sufficient reach for common T-slot profiles while keeping overhang modest for stability. Are special tools required to change the inserts? Insert retention uses an M5x12 Torx screw secured with a T20 key; this standardised solution streamlines insert changes and reduces toolroom complexity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm T-Slot Cutter for MGMN 200 Indexable Inserts L65mm, 2 Cutting Edges, M16 - Teknik Makina
Benefit from the combination of 50 mm diameter, secure M16 threaded mounting and compatibility with MGMN 200 indexable inserts for reliable T‑slot production; order the tool directly via Metav Werkzeuge or contact our consultants for application advice. T-slot cutter TKC280TM – 50 mm diameter, for MGMN 200 indexable inserts (Teknik Makina) The T-slot cutter TKC280TM is a purpose-made milling tool for producing precise T‑slots and internal profiles using MGMN 200 indexable inserts, designed for industrial workshop and production use. 50 mm nominal diameter Compatible with MGMN 200 inserts (Korloy) M16 threaded mounting 25 mm shank, two cutting edges Consistent T‑slot geometry for efficient production The TKC280TM is engineered to deliver repeatable groove profiles by combining a 50 mm diameter body with two cutting edges and a 2 mm cutting height, enabling stable material removal and reduced vibration. Using standard MGMN 200 indexable inserts simplifies tool management and lowers downtime: worn inserts are replaced quickly, restoring cutting performance without recalibration. For manufacturing environments where cycle time and predictability matter, this cutter supports steady throughput while preserving the accuracy of each milled T‑slot. Secure mounting and straightforward insert handling A robust M16 thread and a 25 mm shank provide solid clamping and concentricity for the spindle interface, which reduces run‑out and improves surface finish. The tool is supplied with an Allen 6 key for insert clamping, allowing fast, tool‑side changes on the shop floor. Clear mechanical fixation and the use of indexable insert technology mean maintenance is straightforward: insert rotation or replacement restores cutting geometry quickly, supporting lean workflows in small‑batch and serial production alike. Versatility, lightweight design and practical workshop benefits With an overall length of 65 mm and a mass of just 0.152 kg, the cutter balances rigidity with manageable handling during tool changes and storage. Compatibility with common Korloy MGMN 200 inserts makes the cutter a practical choice for workshops that prefer established insert systems; the indexable approach keeps inventory flexible and reduces tooling costs over time. The compact profile of this milling cutter also aids in collision tolerance and toolpath planning on compact machining centres, supporting both retrofit and new‑build setups where space and tool accessibility are considerations. Contact Metav Werkzeuge for procurement and application support with the Teknik Makina TKC280TM—our specialists in Emmerich will advise on suitability and delivery to your workshop. Technical data Article number: TKC280TM Manufacturer: Teknik Makina Product: T‑slot cutter for MGMN 200 indexable inserts Core data Diameter: 50 mm Overall length: 65 mm Shank diameter: 25 mm Weight: 0.152 kg Cutting edges: 2 Cutting height: 2 mm Thread: M16 Allen key: 6 Features / Compatibility Compatible with Korloy MGMN 200 inserts Indexable insert system Threaded mounting for secure clamping Compact overall length for confined setups FAQ Is this cutter compatible with Korloy MGMN 200 inserts? Yes. The TKC280TM T‑slot cutter from Teknik Makina is designed for MGMN 200 indexable inserts and is compatible with Korloy‑brand inserts. What mounting interface does the tool use? The cutter uses an M16 threaded mounting and a 25 mm shank for secure clamping in toolholders and spindle adaptors. How many cutting edges does the cutter have and what is the cutting height? The tool features two cutting edges with a cutting height of 2 mm, providing a balance between material removal and finish quality. Which Allen key is required for insert clamping? Insert clamping and adjustment are carried out with a 6 Allen key supplied for the TKC280TM. What are the dimensions and weight of the tool? The tool has a 50 mm diameter, 65 mm overall length and weighs 0.152 kg. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm T‑Nut Cutter 6 Teeth 120mm Overall Length, 31.5mm Cutting Shank - Teknik Makina
Robust machining performance combined with quick insert changes and a stable 32 mm shank ensure consistent T‑slot quality and low downtime. Order the T‑slot milling cutter TKC066TM directly via Metav Werkzeuge or ask our consultants if needed. T-slot milling cutter TKC066TM — 50 mm diameter, six cutting edges (Teknik Makina) A T-slot milling cutter engineered for precision T‑grooves in industrial milling applications, compatible with Taegutec SPMG 07 indexable inserts 50 mm cutting diameter for robust T‑slots 32 mm shank for stable clamping Six cutting edges for efficient material removal Compatible with Taegutec SPMG 07 indexable inserts Accurate T‑slot production with repeatable geometry The T‑slot milling cutter TKC066TM is configured to deliver repeatable slot dimensions thanks to a 50 mm cutting diameter combined with six cutting edges. The multi‑edge arrangement balances chip load and reduces vibration, which leads to improved surface consistency and fewer rework cycles. For production environments where repeatability matters, the cutter’s geometry supports stable finish quality without complex process adjustments. Stable clamping and reduced run‑out for better tool life A 32 mm shank paired with a 120 mm overall length provides a stiff interface between tool and spindle, lowering radial run‑out and improving tool life. The relatively modest mass (0.496 kg) contributes to reduced spindle stress during long runs. These mechanical advantages translate into fewer tool changes and a more predictable maintenance schedule, supporting higher machine uptime and better throughput. Fast insert changes and compatible tooling system Insert changes are straightforward: the cutter accepts SPMG 07 indexable inserts from Taegutec, secured with a M2.5×7 Torx screw that requires a T8 key. This common fastener format simplifies stocking of service parts and shortens changeover time, making the cutter a cost‑effective choice for batch production where quick recovery between jobs matters. Designed for productivity in workshop and production settings With an effective cutting height of 10 mm and an overall design focused on stability, the cutter is suited to repetitive T‑slot machining tasks on industrial milling centres and machining stations. The use of indexable inserts keeps per‑cutting‑edge costs low and allows optimised tool life management by rotating or replacing worn inserts rather than discarding the entire body. Practical selection and setup guidance When integrating the cutter, ensure the machine spindle and clamping system match the 32 mm shank and that sufficient torque is available for the insert screws. The cutter’s compatibility with Taegutec SPMG 07 inserts offers a clear supply path for replacements. For tailored advice on machining parameters or to confirm fitment with specific machines, Metav’s technical team can provide guidance based on production goals and material handling. Contact Metav Werkzeuge for expert advice on supply and optimal setup of the Teknik Makina TKC066TM T‑slot milling cutter — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TKC066TM Manufacturer: Teknik Makina Name: T‑slot milling cutter Measurements & weights Diameter: 50 mm Shank diameter: 32 mm Cutting shank diameter: 31.5 mm Shaft cutting length: 45 mm Cutting height: 10 mm Number of cutting edges: 6 Overall length: 120 mm Weight: 0.496 kg Features & compatibility Compatible insert: SPMG 07 Compatible insert manufacturer: Taegutec Torx screw: M2.5×7 Torx key size: T8 Story trigger: t-nut-fraeser FAQ Which inserts fit this cutter? The TKC066TM is designed for SPMG 07 indexable inserts; Taegutec recommends these inserts for a reliable fit and repeatable cutting performance. What shank size is required for mounting? Mounting requires a 32 mm shank holder to ensure stable clamping and minimise run‑out when using the TKC066TM. How many cutting edges does the cutter have and what diameter is it? The cutter features six cutting edges and a 50 mm cutting diameter, offering balanced chip removal and good surface quality. How are the inserts secured and what tool is needed? Inserts are secured with an M2.5×7 Torx screw; a T8 key is used for fastening and insert replacement on the TKC066TM. Is the tool body replaced when inserts wear? No — worn insert edges are rotated or replaced individually, which reduces operating costs compared with solid‑tool systems. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
53mm Chamfer Cutter 45°/90° 3 Cutting Edges 37mm Cutting Height 25mm Shank - Teknik Makina
Benefit from precise chamfering with a Ø53 mm cutter that accepts TCMT 16T3 indexable inserts and offers both 45° and 90° chamfer options; the 25 mm shank provides secure clamping for repeatable results. Order the tool directly via Metav Werkzeuge or consult their specialists for application guidance. Chamfer Cutter S342TM – indexable cutter, Ø53 mm, 45°/90° chamfers (Teknik Makina) The Chamfer Cutter S342TM is an indexable milling cutter designed for efficient production of 45° and 90° chamfers in machining and workshop environments, suitable for use on milling heads and CNC toolholders. Indexable for TCMT 16T3 inserts 45° and 90° chamfer angles Ø53 mm diameter, 3 cutting edges 25 mm shank for secure clamping Deliver consistent chamfers and improved assembly fit The cutter delivers repeatable results thanks to its Ø53 mm body and a three‑edge cutting configuration that stabilises cutting forces. Chamfers at 45° and 90° are produced without additional setup changes, which simplifies jigging and reduces rework. The measurable cutting height 37 mm allows predictable material removal per pass, enabling planners to calculate cycle times and tolerances with confidence. This component is aimed at production workshops and contract manufacturers where process reliability is prioritised. Faster tool changes and reduced downtime with indexable inserts Designed for indexable operation, the tool accepts TCMT 16T3 inserts that are commonly stocked and quickly replaced. The use of indexable inserts minimises tool change time and keeps machining uptime high; insert indexing restores original geometry without regrinding. Fixing is executed with a Torx screw M3.5x8.5 and maintenance or replacement torque is applied via T15 drive tools. At a total length of 100 mm and a modest mass of 0.634 kg, the cutter offers good dynamic behaviour in automated spindles while remaining easy to handle during set‑up. Secure clamping and compatibility with common toolholders A 25 mm shank diameter ensures robust clamping in standard collets and hydraulic chucks, providing concentricity and resistance to deflection in interrupted cuts. The cutter’s design concentrates the cutting edges near the periphery for controlled chip evacuation and steady surface finish on chamfered edges. The product from Teknik Makina is suitable where quick indexability and predictable chamfer geometry are required in serial production or maintenance workshops, helping maintain process quality and assembly accuracy. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina Chamfer Cutter S342TM and to arrange supply directly from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical clarification and order support Technical Data Article number: S342TM Manufacturer: Teknik Makina Name: Chamfer Cutter S342TM Facts Diameter: 53 mm Cutting edges: 3 Total length: 100 mm Shank diameter: 25 mm Cutting height: 37 mm Chamfer angles: 45°, 90° Weight: 0.634 kg Torx screw: M3.5x8.5 Torx key: T15 Special features For indexable inserts TCMT 16T3 Indexable design for fast insert changes Three cutting edges for stable cutting Suitable for milling heads and CNC toolholders FAQ What insert type does this cutter use? The cutter is designed for TCMT 16T3 indexable inserts, which provide fast replacement and consistent geometry for chamfering operations. Can this tool produce both 45° and 90° chamfers? Yes, the tool is configured to machine chamfers at 45° and 90° angles, offering flexibility for assembly preparations and edge finishing. What is the shank diameter and will it fit standard holders? The tool has a 25 mm shank, which is compatible with common collets and toolholders used in milling and CNC applications. How many cutting edges does the cutter have and what is the total length? The cutter features 3 cutting edges and a total length of 100 mm, balancing stability with reach in typical workshop setups. Which screw and drive size secure the inserts? Inserts are secured with a Torx screw M3.5x8.5, tightened or released using a T15 Torx key. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
55mm T-Nut Cutter For RD-- 1003 Indexable Inserts L45mm - Teknik Makina
Take advantage of precise T-slot milling with a 55 mm diameter cutting head and compatibility with RD-- 1003 indexable inserts for consistent slot geometry and reduced tool change time — order directly via Metav Werkzeuge or consult the team for tailored tooling advice. T-slot cutter for RD-- 1003 indexable inserts, 55 mm diameter The T-slot cutter is designed for efficient creation and finishing of T-slots in machining setups, offering stable toolholding and repeatable results in industrial milling applications. 55 mm diameter for robust slotting Compatible with RD-- 1003 inserts 16 mm shank for secure clamping Six cutting edges for balanced cutting Consistent slot geometry and production reliability Precision in slotting begins with tool geometry and insert compatibility. The 55 mm diameter cutting head combined with RD-- 1003 indexable inserts provides repeatable pocket and T-slot profiles, reducing the need for rework. The cutter’s design translates insert indexing into predictable cutting forces, which helps maintain dimensional tolerances across batch production. By using indexable inserts, the emphasis is on fast, cost-effective maintenance: when an edge is worn, only the insert needs replacement rather than the whole tool, supporting uninterrupted workflow and predictable uptime. Stable mounting and improved surface finish A secure connection between spindle and cutter is essential for vibration control and surface quality. The 16 mm shank and overall compact form (total length 45 mm) deliver a rigid interface that minimises chatter during milling, while the six cutting edges distribute load evenly for smoother engagement. The cutting length 24 mm is optimised to reach common T-slot depths without compromising stiffness. These features combine to lower acoustic emissions, reduce tool wear and deliver a finer finish on the machined slot, which is particularly important when subsequent assembly or sliding fits are required. Practical handling and insert fastening explained Maintenance and insert replacement are straightforward: inserts are secured with an M3.5x8.5 screw tightened using a T15 torx key, providing a reliable clamping method that resists loosening under load. The low mass (approx. 0.135 kg) of the cutter helps reduce inertial effects during direction changes, making it well suited to both CNC milling centres and manual machines with robust toolholders. For identification and reordering, the cutter is listed under SKU TKC180TM, matching tooling inventory with production requirements and spare-part logistics. Suitable operations and tool lifecycle management This cutter is intended for standard T-slot milling tasks in industrial settings where indexable tooling enhances efficiency. The modular nature of indexable inserts supports predictable lifecycle planning: track insert usage, replace individual edges as they reach wear limits, and maintain a small inventory of spare inserts rather than oversized complete cutters. Attention to correct clamping torque on the M3.5x8.5 screw and regular inspection of the insert seats will extend service life and contribute to consistent part quality throughout production runs. For technical selection and procurement of the Teknik Makina T-slot cutter (SKU TKC180TM) with RD-- 1003 compatibility, contact Metav Werkzeuge for expert advice and order handling to ensure the right tooling configuration for the application. Technical data SKU: TKC180TM Label: 55mm T-Nut Fräser RD-- 1003 L45mm Manufacturer: Teknik Makina Dimensions & weight Diameter: 55 mm Total length: 45 mm Cutting length: 24 mm Shank diameter: 16 mm Number of cutting edges: 6 Weight: 0.135 kg Compatibility & assembly Compatible inserts: RD-- 1003 (indexable inserts) Torx key: T15 Fastening screw: M3.5x8.5 Product type: T-slot cutter ECLASS: 21180605 FAQ Which inserts fit this cutter? The cutter accepts RD-- 1003 indexable inserts, which are specified for the tool’s pocket and clamping geometry. What shank size is required for mounting? A 16 mm shank holder or collet is required to mount the cutter securely for machining operations. How are the inserts secured in place? Inserts are fastened with an M3.5x8.5 screw and can be tightened or loosened using a T15 torx key. What is the designation for reordering this cutter? Reorder using SKU TKC180TM, which identifies the 55 mm T-slot cutter compatible with RD-- 1003 inserts. Is the cutter balanced for high-speed milling? The cutter’s multiple cutting edges and compact geometry promote balanced cutting behaviour; check machine and spindle specifications for permitted speeds. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
55mm T-Nut Cutter For RD-- 12 Indexable Inserts L45mm, 5 Flutes - Teknik Makina
Take advantage of a compact, precision‑oriented design that pairs a 55 mm cutting diameter with compatibility for RD-- 12 indexable inserts, delivering reliable T‑slot machining and predictable tool life; order directly via Metav Werkzeuge or consult the Metav team for application advice. T-slot cutter TKC185TM — 55 mm diameter, for RD-- 12 indexable inserts (Teknik Makina) T-slot cutter TKC185TM for machining T‑slots using RD-- 12 indexable inserts; engineered for stable performance in workshop and industrial milling. 55 mm cutting diameter Compatible with RD-- 12 inserts Five cutting edges for stable cuts Shaft Ø 16 mm, L45 mm overall Faster, consistent T‑slot production through optimised insert use The combination of a 55 mm cutting diameter and compatibility with RD-- 12 indexable inserts enables efficient slot creation with consistent geometry. Indexable inserts allow multiple cutting edges to be used sequentially, so cycle times are maintained while shop floor handling is reduced. This design supports a measurable increase in productivity and reduces the frequency of full‑tool changes, which is particularly beneficial in repetitive production or batch machining of profiles. Stable clamping and compact dimensions for secure machining A robust shaft Ø 16 mm and an overall length of 45 mm provide a compact tool with good rigidity, helping to minimise chatter and deflection in clamped setups. The 24 mm cutting length on the shaft gives sufficient engagement for typical T‑slot depths while keeping the overhang short. Together these dimensions reduce vibration and improve surface finish, making the cutter suitable for both conventional milling machines and CNC toolholders that require precise, repeatable results. Practical fastening and simple insert replacement for predictable maintenance Inserts are secured with a Torx screw M3.5x8.5, tightened using a T15 Torx key, allowing quick, tool‑guided index changes without complex adjustments. The cutter features five cutting edges, which spreads wear and extends the interval between insert rotations. For teams new to indexable tooling, this means predictable maintenance cycles and easy stock management of RD-- 12 inserts, simplifying toolroom logistics while maintaining cut quality. For tailored application advice or to arrange supply through Metav Werkzeuge, contact the Metav technical team at info@metav-werkzeuge.com or call +49 2822 7131930 — assistance is available from our Emmerich facility. Technical data Article number: TKC185TM Manufacturer: Teknik Makina Product type: T‑slot cutter Facts Cutting diameter: 55 mm Overall length: 45 mm Shaft diameter: 16 mm Shaft cutting length: 24 mm Number of cutting edges: 5 Weight: 0.138 kg Special features Compatible with RD-- 12 indexable inserts Torx key: T15 Torx screw: M3.5x8.5 Label: 55mm T‑Nut Fräser RD-- 12 L45mm FAQ What insert type does this cutter use? The cutter is designed for RD-- 12 indexable inserts, which are secured with a Torx screw M3.5x8.5. Is the shaft compatible with standard toolholders? The Ø 16 mm shaft and compact L45 mm overall length suit common milling holders that accept 16 mm shanks. How many cutting edges are available before an insert change? Each insert configuration offers multiple edges; the cutter itself is specified with five cutting edges to distribute wear and extend service intervals. Can this tool be used for deep T‑slots? The tool provides a 24 mm cutting length on the shaft; suitability for deeper slots depends on required slot depth and clamping arrangement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
55mm T-Slot Cutter 2 Cutting Edges, 25mm Shank 120mm Overall Length - Teknik Makina
Take advantage of a compact combination of rigidity and insert flexibility: the T-slot cutter offers a 55 mm diameter and a 25 mm shank for stable, repeatable slotting; compatible with Korloy MGM 5C inserts for efficient chip formation. Order the tool directly via Metav Werkzeuge or consult the advisors for application-specific guidance. T-slot cutter TKC306TM — 55 mm diameter, 25 mm shank (Teknik Makina) A T-slot cutter designed for precision T-slot and round milling in CNC and conventional milling machines, offering sturdy shank support and insert interchangeability for industrial production environments 55 mm diameter for T-slot shaping 25 mm shank for rigid toolholding Compatible with Korloy MGM 5C inserts Robust two-edge configuration Stable machining through rigid geometry and shank design The cutter combines a 25 mm shank with a balanced body and a 120 mm overall length to reduce run-out and vibration during T-slot formation. This geometry enhances surface finish and extends tool life by maintaining a consistent cutting line, which is particularly important when slot tolerances are tight. The tool’s mass distribution and 0.513 kg weight support steady spindle loads, enabling reliable cycle times and fewer reworks in series production. Insert system and fast serviceability for minimal downtime Designed for use with Korloy MGM 5C indexable inserts, the cutter simplifies reconditioning: worn inserts are replaced without regrinding the tool body. The secure fixing with an M8 Torx screw and supplied 6 Allen key specification ensures repeatable clamping torque and quick changeover. With 2 cutting edges and a 5 mm cutting height, material removal can be efficient while preserving insert life; this configuration supports predictable chip flow and reduces the need for complex coolant strategies. Application versatility and process reliability in industrial settings As a round milling solution, the tool handles both standard T-slots and related profile milling tasks, delivering consistent dimensional control across batches. The measured distance from cutting edge to shank (15.25 mm) gives a clear datum for setup, aiding fixture design and repeatability on jigs or CNC vises. The combination of indexable inserts and a sturdy shank reduces tooling inventory complexity while keeping machining costs manageable for workshops and production lines focused on throughput and precision. For application advice or to discuss suitable insert grades and cutting parameters, contact Metav Werkzeuge for personalised recommendations and procurement support. Technical data Article number: TKC306TM Manufacturer: Teknik Makina Diameter: 55 mm Shank diameter: 25 mm Overall length: 120 mm Cutting edges: 2 Cutting height: 5 mm Compatible inserts: MGM 5C (Korloy) Fixing screw: M8 Torx Torx key: 6 Allen Weight: 0.513 kg Core specifications Diameter 55 mm Shank 25 mm Overall length 120 mm Cutting height 5 mm Distance cutting edge–shank 15.25 mm Cutting edges 2 Weight 0.513 kg Special features Compatible with Korloy MGM 5C inserts Round milling cutter application Secure M8 fixing screw Indexable insert system for fast service FAQ What inserts fit this cutter? The cutter accepts Korloy MGM 5C indexable inserts; the design and pocket geometry are optimised for this insert type to ensure stable cutting and predictable chip control. Is the tool suitable for heavy-duty slotting? The tool’s 25 mm shank and two-edge configuration allow stable slotting under standard industrial feeds; for very deep or interrupted cuts, adjust parameters and check insert grade recommendations. How is the insert secured and serviced? Inserts are secured with an M8 Torx screw; replacement is straightforward and reproducible, enabling quick changeovers and minimal downtime for the TKC306TM. Can the cutter be used for round milling tasks? Yes, the geometry supports round milling and T-slot machining, making the cutter a versatile choice for profile milling and slot operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
5mm Adjustable Chamfer Cutter 10°–80° Cutting Diameter 34mm Shank 25mm - Teknik Makina
Take advantage of the adjustable 10°–80° angle range, the stable 25 mm shank and compatibility with TCMT 16T3 indexable inserts for precise, repeatable chamfering in production environments; order the cutter directly via Metav Werkzeuge or consult our experts for application advice. Adjustable Chamfer Cutter by Teknik Makina — 10°–80° angle, accepts TCMT 16T3 The Adjustable Chamfer Cutter is an indexable chamfering tool engineered for flexible bevel creation across a range of production and workshop tasks. Adjustable angle 10°–80° 25 mm shank for rigid clamping Max cutting diameter 34 mm Compatible with TCMT 16T3 inserts Flexible bevel control for varied chamfering tasks The adjustable design provides an immediate benefit in setups that require multiple bevels: the 10°–80° angle range permits rapid switching between shallow and steep chamfers without changing the tool body. This flexibility reduces downtime and simplifies tool inventories in small batches or mixed-production runs. The mechanism is optimised for repeatability, so every setting change maintains consistent edge geometry — important when tolerances are tight and finish quality matters. Rigid mounting and insert-based economy A 25 mm shank ensures secure clamping for stable cutting conditions, while a maximum cutting diameter of 34 mm defines the tool’s working envelope. Compatibility with TCMT 16T3 indexable inserts delivers the usual indexable-tool advantages: fast insert changes, consistent cutting edges and cost-efficient reconditioning compared with brazed cutters. The cutter is supplied with a Torx fastening system (M3.5×8.5 screw, T15 key) for reliable insert retention and straightforward maintenance. Practical handling and workshop integration Weighing just 0.37 kg, the tool balances ease of handling with industrial robustness, making it suitable for both bench-mounted operations and longer production runs where tool change ergonomics matter. The cutter’s modular concept supports standard indexable-insert workflows and simplifies spare-part logistics. For application-specific questions or to confirm fitment in a particular holder, Metav Werkzeuge can advise on the correct clamping and insert choices to match existing toolholders and machine systems. Contact Metav Werkzeuge for tailored application advice on the Teknik Makina adjustable chamfer cutter and secure reliable supply directly from Emmerich. Technical data Article number: AH15TM Manufacturer: Teknik Makina Designation: Adjustable chamfer cutter Core specifications Angle range: 10°–80° Max cutting diameter: 34 mm Shank diameter: 25 mm Weight: 0.37 kg Features and compatibility Inserts: TCMT 16T3 Torx screw: M3.5×8.5 Torx key: T15 Flexible holder designation: S1474 FAQ What angle range can be set with this cutter? The adjustable chamfer cutter by Teknik Makina can be set across a 10°–80° range to cover shallow to steep bevels. Which indexable inserts are compatible? Compatibility is specified for TCMT 16T3 inserts; the cutter uses these standard inserts for economical edge changes. What shank size is required for secure clamping? A 25 mm shank diameter provides the necessary rigidity for stable chamfering operations with this cutter. How is the insert secured on the cutter? Inserts are fastened with a Torx screw (M3.5×8.5) using a T15 key for reliable retention and simple servicing. Is the cutter suitable for production use? With a robust shank, indexable inserts and adjustable angles, the Teknik Makina chamfer cutter is intended for workshop and production environments where versatility and repeatability are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
60mm T-Slot Cutter 4 Flute 55° Cutting Angle 35mm Cutting Length 25mm Shank - Teknik Makina
Take advantage of the combination of robust shank design, precise insert compatibility and efficient chip evacuation for reliable T-slot machining; order the cutter directly via Metav Werkzeuge or consult the technical team for suitability. T-Nut Cutter TKC251TM — 60 mm diameter, 25 mm shank | Teknik Makina The T-Nut Cutter TKC251TM is a high-capacity T-slot cutter designed for producing secure T-nut profiles in metalworking and fixture production. High-efficiency 60 mm cutting diameter 4 cutting edges for smooth material removal 25 mm shank for solid clamping stability Precision and stability for consistent T-slot profiles The TKC251TM is engineered to deliver a consistent T-slot geometry thanks to its 60 mm diameter and stable 25 mm shank. The cutter’s 4 flutes promote balanced cutting forces and help to reduce chatter, while the specified cutting angle 55° supports accurate sidewall formation. These design choices combine to reduce rework and ensure repeatable part quality, particularly where secure fastening or locating elements depend on uniform T-nut dimensions. Weight and balance are tuned to support steady spindle performance; the tool mass of 0.583 kg contributes to vibration damping without compromising responsiveness. Fast insert changes and clarified insert compatibility This T-slot cutter accepts DCMT 11T3 indexable inserts, a common and versatile geometry for side-and-face operations. The indexable system allows worn cutting edges to be rotated or replaced rapidly, reducing downtime compared with brazed-tip tools. Fixing is secured by a M3.5x9 Torx screw and tightened with a T15 key, enabling repeatable clamp torque and straightforward servicing at the bench. For users unfamiliar with insert codes: DCMT 11T3 denotes an indexable, trigon-shaped insert with a nominal size suitable for the cutter’s pocket; the set-up supports precise chip breaking and economical edge indexing. Efficient machining workflow and workshop advantages With an overall length 120 mm and a cutting length 35 mm on the shaft, this cutter is configured for deep, stable engagement in common T-slot operations. The combination of robust shank diameter and multiple cutting edges contributes to improved surface finish and faster feed rates under suitable machine conditions. The cutter’s geometry is intended to provide a balance between material removal rate and tool life, supporting efficient batch production without sacrificing profile accuracy. Supplied technical data and the tool’s indexable insert system make it practical to plan replacement cycles and maintenance in a production schedule, helping workshops maintain throughput and predictable quality. Contact Metav Werkzeuge in Emmerich for procurement advice and accurate specification matching for the Teknik Makina T-slot cutter TKC251TM (SKU TKC251TM) Technical data SKU: TKC251TM Manufacturer: Teknik Makina Compatible inserts: DCMT 11T3 Core dimensions Diameter: 60 mm Overall length: 120 mm Shank diameter: 25 mm Cutting length (shaft): 35 mm Number of flutes: 4 Weight: 0.583 kg Cutting angle: 55° Design & compatibility Torx key: T15 Torx screw: M3.5x9 Files available: IDs 62de7eec33927e49dbf32794, 62de7e5c0f56dbb4de4dbf10 FAQ What inserts fit this T-slot cutter? The cutter uses DCMT 11T3 indexable inserts; these are compatible with the cutter’s insert pocket and support economical edge indexing. Can the cutter be clamped in a standard 25 mm toolholder? The tool features a 25 mm shank, which is intended for secure clamping in holders or collets rated for that diameter. What is the significance of the 4 flutes on this cutter? Four cutting edges distribute cutting forces evenly, improving surface finish and reducing vibration during T-slot machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm T-Grove Holder for Korloy MGM 3C inserts - Teknik Makina
Specifications: Order Number: TKC301TM Item: T-Grove Holder usable with MGM 3C Indexable Inserts of Korloy Brand: Teknik Makina Metric Information: Diameter: 63mm Cutting Edges: 2 Weight: 0.543kg Total length: 120mm Cutting Height: 3mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
63mm T-Nut Cutter 2 Flute 4mm Cut Height 25mm Shank 120mm Overall Length - Teknik Makina
Take advantage of a robust combination of stability and compatibility: the cutter's Ø63 mm diameter and 25 mm shank deliver secure clamping and repeatable performance, while the indexable insert system (MGM 4C, Korloy-compatible) enables quick, economical tool servicing — order via Metav Werkzeuge or consult our specialists for application advice T-slot cutter TKC304TM — T-slot milling cutter with Ø63 mm and 25 mm shank (Teknik Cutting Tools) The T-slot cutter TKC304TM is a round milling cutter designed for precision machining of T-slots and dovetail channels in CNC machining centres, delivering secure seating for MGM 4C indexable inserts and compatibility with Korloy insert ranges Ø63 mm cutting diameter 25 mm solid shank for secure clamping Accepts MGM 4C / Korloy indexable inserts 2 cutting edges for efficient material removal Consistent cutting performance through secure shank and geometry The tool's 25 mm shank and balanced geometry provide axial rigidity and stable tool life during prolonged machining cycles. With a cutting diameter of Ø63 mm and a cutting height of 4 mm, the cutter enables controlled engagement depth, reducing vibration and helping to maintain concentricity in repetitive T-slot operations. The presence of 2 cutting edges concentrates material removal into fewer, stronger flutes, which supports predictable cycle times and repeatable slot quality. These design choices translate into measurable process reliability for production-focused shops that demand consistent tolerances. Fast insert changes and predictable clamping for lower operating cost This milling cutter accepts MGM 4C indexable inserts and is specified as compatible with Korloy inserts, allowing users to select widely available grades and geometries. The insert is secured with an M8 Torx screw, tightened with the supplied Allen key 6, ensuring a consistent clamping torque and repeatable seat location after each replacement. Indexable inserts mean worn cutting edges can be exchanged without regrinding the tool body, which simplifies inventory and reduces per-edge cost, particularly in high-volume or multi-shift environments. The modular insert system also supports quicker set-up times during tool changes. Practical integration into machining centres and accessible reach With an overall length of 120 mm and a cutter-to-shank distance of 19.25 mm, the tool offers sufficient reach for standard T-slot profiles while keeping the unsupported length minimal for reduced deflection. The cutter's mass of 0.556 kg reflects a compact, serviceable design that is straightforward to handle during tool preparation and mounting. The round milling cutter form factor fits common toolholders and collet systems used in modern CNC equipment, making the tool a practical addition to workshop stocks where predictable mounting, balance and runout control are priorities. The TKC304TM's configuration supports both repeatable setup and straightforward maintenance routines. For reliable T-slot production and specialist advice on the Teknik Cutting Tools T-slot cutter TKC304TM, contact Metav Werkzeuge for ordering and application support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TKC304TM Manufacturer: Teknik Makina Name: T-slot cutter (T-Nut Fräser) Facts Diameter: Ø63 mm Shank diameter: 25 mm Cutting height: 4 mm Number of cutting edges: 2 Overall length: 120 mm Cutting-to-shank distance: 19.25 mm Weight: 0.556 kg Torx screw: M8 Special features Accepts MGM 4C indexable inserts Compatible with Korloy inserts Round milling cutter design Secured with Allen key size 6 FAQ What insert type does this cutter use? The cutter uses MGM 4C indexable inserts and is compatible with Korloy insert grades for flexible edge selection. Is the shank size suitable for standard collets? Yes, the 25 mm shank is compatible with common 25 mm toolholders and collet systems used in CNC machining centres. How many cutting edges does the tool have and what does that mean for cutting? The tool has 2 cutting edges, which concentrates cutting forces on fewer flutes for stable chip formation and predictable material removal in T-slot operations. Which fastening hardware is supplied for the insert? The insert is secured with an M8 Torx screw and is tightened using an Allen key 6 for consistent clamping torque. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; eMail: info@metav-werkzeuge.com
63mm T-Nut Cutter 55° For DCMT / 35° For VBMT Indexable Inserts 4 Teeth, 25mm Shank - Teknik Makina
Take advantage of a compact tooling solution that combines sturdy shank stability, standard indexable insert compatibility and precise T-slot cutting for reduced setup time. The design pairs a 63 mm cutting diameter with a 25 mm shank for reliable rigidity, while compatibility with common indexable inserts keeps consumable costs low — order or enquire via Metav Werkzeuge for tailored advice. T-Nut Cutter S072TM — T-slot cutter, 63 mm diameter, DCMT-compatible A robust T-slot cutter, T-Nut Cutter S072TM, built for producing precise T-nuts and grooves in milling operations with standard indexable inserts Precision T-slot cutting for repeatable fittings Compatible with DCMT 11T3 indexable inserts 63 mm diameter for deep, stable cuts 25 mm shank for rigid toolholding Increase throughput with a stable cutter geometry The cutter’s 63 mm diameter and stout 25 mm shank deliver a combination of rigidity and reach that reduces vibration and enables higher, more consistent feed rates. By improving mechanical stability during machining, the tool supports shorter cycle times and fewer rejected parts; this is an efficiency gain that directly translates into higher throughput for series production. The overall tool geometry is optimised for producing repeatable T-slots, so changeovers become faster and machining parameters stay more predictable. Lower tooling costs through standard insert compatibility Featuring support for DCMT 11T3 indexable inserts and geometries specified as 55° for DCMT and 35° for VBMT, the cutter uses widely available insert types to reduce inventory complexity. The use of common inserts means replacement is quick and inexpensive compared with bespoke solutions, and carbide insert options offer balanced wear performance. For operations seeking predictable tool-change procedures and minimal downtime, the insert system provides a practical cost-benefit while maintaining surface quality and slot accuracy. Designed for secure seating and simple maintenance With four cutting edges and a clear fastener pattern, the cutter ensures stable insert clamping and easy maintenance. The supplied fastening arrangement uses a Torx screw M3.5x9 and a T15 key, which standardises the tightening process and ensures repeatable clamping torque. This arrangement reduces the risk of insert movement under load and makes routine servicing straightforward on the shop floor. The overall construction and fastener choice support long-term repeatability without specialised tooling. Practical setup guidance and quality assurance The cutter’s 120 mm overall length and 40 mm cutting length make it suitable for a range of T-slot depths while retaining sufficient tooloverhang control. When pairing the cutter with suitable cutting parameters and a secure toolholder, the operator benefits from improved dimensional consistency and a cleaner surface finish. For best results, match the insert geometry to the material and machine capability; those seeking specific cutting data for unusual workpiece alloys or novel setups should consult the technical team at Metav Werkzeuge for application-specific guidance. For application advice or to discuss a tailored tooling package, contact Metav Werkzeuge — their specialists in precision tooling will assist with selection, compatible inserts and procurement from Emmerich. Technical data Article number: S072TM Manufacturer: Teknik Makina Item name: T-Nut Cutter Compatible inserts: DCMT 11T3 Insert angles: 55° for DCMT and 35° for VBMT Facts Diameter: 63 mm Cutting edges: 4 Overall length: 120 mm Shank diameter: 25 mm Cutting length: 40 mm Weight: 0.536 kg Cutting angle: 55° Special features For indexable inserts DCMT 11T3 Torx screw M3.5x9 Torx key T15 Designed for repeatable T-slot machining FAQ Which indexable inserts fit this cutter? The T-Nut Cutter S072TM accepts DCMT 11T3 indexable inserts and is dimensioned to work with those geometries for reliable T-slot profiling. How many cutting edges does the tool have and what is the effective cutting length? The tool features 4 cutting edges and an effective cutting length of 40 mm, giving a good balance between material removal and slot depth capability. What shank size is required for secure toolholding? A 25 mm shank is specified for the cutter; using a matched, high-rigidity toolholder improves repeatability and surface finish when machining T-slots. Which fastening components are needed for insert replacement? Insert clamping uses a Torx screw M3.5x9, tightened with a T15 key, ensuring consistent clamping torque and simple maintenance routines. Is the cutter suitable for deep T-slots or limited-access pockets? With a 63 mm diameter and 120 mm overall length, the cutter is suited to moderate-depth T-slots; for deeper or very narrow pockets, verify reach and clearance against the specific workpiece geometry Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm T-Nut Cutter 8 Teeth 120mm Overall Length 32mm Shank 45mm Cutting Length - Teknik Makina
Benefit from precise T‑slot machining with high productivity and low downtime: the cutter's 63 mm cutting diameter combined with eight cutting edges delivers efficient material removal, while the 32 mm shank ensures rigid clamping for consistent slot geometry. Order the tool directly via Metav Werkzeuge or consult the specialists for application-specific advice. T-slot cutter — 63 mm diameter, 8 cutting edges — Teknik Makina The T-slot cutter is a specialised milling tool for producing precise T-slots and T-nut grooves in milling operations, suitable for use with indexable inserts such as SPMG 07. 63 mm cutting diameter for wide T-slots Eight cutting edges for smooth material removal Accepts SPMG 07 indexable inserts 32 mm shank diameter for stable clamping Higher throughput from robust geometry and more cutting edges The tool's 63 mm cutting diameter and eight cutting edges are engineered to increase material removal rates without sacrificing finish quality. Multiple cutting edges distribute cutting forces, which reduces load peaks and supports longer tool life when combined with proper feed rates. The cutter's cutting height 10 mm provides the necessary engagement to form standard T‑nut profiles in a single pass where machine rigidity allows, cutting cycle times and simplifying process planning for production engineers and workshop managers. Insert system for quick service and predictable costs This milling head uses SPMG 07 indexable inserts and is compatible with Taegutec insert types, enabling economical replacement and rapid on‑machine changes. Inserts are secured with a M2.5x7 Torx screw, loosened and tightened with a T8 key, allowing repeatable seating and minimal downtime during insert changes. The indexable insert approach reduces tooling spend compared with solid cutters, since only the cutting segments are replaced; this supports predictable cost-per-part calculations and straightforward maintenance planning. Stable clamping and straightforward integration into production A 32 mm shank and overall length of 120 mm give the cutter the axial reach and rigidity required for many milling set‑ups while keeping overhang moderate. The tool's configuration—shaft cutting length 45 mm and cutting diameter 63 mm—is suited to milling stations that require reliable T‑slot form and repeatability. The robust design and clearly defined fixing hardware support integration into existing tool holders and milling heads, making the cutter a pragmatic choice for industrial workshops and jobbing mills seeking consistent slot geometry and process stability. For precise T‑slot production and application-specific recommendations, contact Metav Werkzeuge — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com — for technical guidance and supply from the Emmerich facility Technical data Article number: TKC068TM Manufacturer: Teknik Makina Designation: T-slot cutter Key dimensions Cutting diameter: 63 mm Number of cutting edges: 8 Overall length: 120 mm Cutting height: 10 mm Shank diameter: 32 mm Shank cutting diameter: 31.5 mm Shaft cutting length: 45 mm Weight: 0.868 kg Features and compatibility Indexable inserts: SPMG 07 Compatible insert supplier: Taegutec Torx screw: M2.5x7 Torx key size: T8 Intended use: T-slot / T-nut machining SKU: TKC068TM FAQ Which inserts fit this cutter? This cutter accepts SPMG 07 indexable inserts and is compatible with Taegutec SPMG variants for straightforward replacement. What are the cutter's diameter and number of cutting edges? The tool offers a 63 mm cutting diameter with eight cutting edges, designed to balance cutting speed and surface finish. What shank size is required for mounting? A 32 mm shank is specified for stable clamping; the cutter's dimensions support common tool holders used in production milling. How are the inserts secured and replaced? Inserts are fastened with a M2.5x7 Torx screw and require a T8 key for removal and installation, ensuring repeatable seating and quick service intervals. For which operations is this cutter intended? The cutter is intended for milling T-slots and T-nut grooves where indexable inserts are preferred for maintenance economy and high cycle throughput. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm T-Nut Cutter for MGMN 300 Indexable Inserts 25mm Shank, 2 Flute, M16 Thread - Teknik Makina
Take advantage of the 63 mm cutting diameter, compatibility with MGMN 300 indexable inserts and the stiff Ø25 mm shank for secure clamping and repeatable T-slot production — order the tool directly via Metav Werkzeuge or consult our specialists for application advice. T-slot cutter TKC288TM (63 mm) for MGMN 300 indexable inserts by Teknik Makina T-slot cutter designed for producing precise T-slots in milling operations using MGMN 300 indexable inserts, suited to industrial and workshop CNC setups 63 mm cutting diameter Compatible with MGMN 300 inserts 25 mm shank diameter (Ø25 mm) M16 mounting thread Precise geometry for consistent T-slots and fewer reworks The robust design ensures a predictable slot profile on every pass: the 63 mm diameter and matched insert geometry create repeatable results that reduce rework. Compatibility with MGMN 300 indexable inserts delivers cost-efficient cutting — when a cutting edge wears, the insert can be rotated or replaced without reconditioning the entire tool, preserving cutting accuracy and saving machine time. The result is steadier throughput and reduced process variability for batch and single-part production. Fast indexable-insert changes to boost uptime Using standard MGMN 300 inserts from recognised manufacturers such as Korloy means replacement is quick and straightforward. The tool accepts 2 cutting edges with a 3 mm cutting-edge height, allowing controlled material removal while extending the service life of each insert. This modular approach reduces consumable costs and keeps maintenance simple, so machining centres can return to production faster after routine servicing. Stable mounting and integration with standard holders Engineered for secure clamping, the cutter features an Ø25 mm shank and an M16 thread for reliable mounting in common toolholders; the compact L65 mm overall length and light 0.158 kg mass contribute to low overhang and reduced vibration. Together, these specifications support higher process stability and improved surface quality in T-slot milling. The design is intended for straightforward fitment into standard milling setups, enabling predictable results and easy integration into existing tooling systems. Contact Metav Werkzeuge for tailored application recommendations and to arrange supply of the Teknik Cutting Tools T-slot cutter TKC288TM for your production needs Technical data Article number: TKC288TM Product type: T-slot cutter Brand: Teknik Makina For inserts: MGMN 300 (Korloy) Cutting diameter: 63 mm Overall length: 65 mm Shank diameter: 25 mm Cutting edges: 2 Cutting edge height: 3 mm Weight: 0.158 kg Thread: M16 ECLASS: 21180605 Allen key size: 6 Label: 63mm T-Nut Fräser MGMN 300 L65mm SKU/UID: TKC288TM Designation (EN): for MGMN 300 Indexable Inserts FAQ Which insert type fits this cutter? The T-slot cutter accepts MGMN 300 indexable inserts; suppliers such as Korloy produce compatible grades. How many cutting edges are used and what is the edge height? This tool uses 2 cutting edges with a cutting-edge height of 3 mm, optimised for stable T-slot creation. What shank diameter and mounting thread are required? The cutter has an Ø25 mm shank and an M16 thread, designed for standard toolholders and secure clamping. Is a special tool needed for assembly or adjustment? Assembly and insert changes require a 6 mm Allen key for the clamping screws. What is the catalogue or article number for ordering? Order using the article number TKC288TM to ensure the correct T-slot cutter configuration. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm T-Nut Cutter for MGMN 300 Indexable Inserts L55mm, 4-Flute, 3mm Tooth Height - Teknik Makina
Combine precise 63 mm cutting diameter, compatibility with MGMN 300 indexable inserts and a robust 20 mm shank for reliable T-slot machining; order the T-nut cutter directly via Metav Werkzeuge or consult our specialists for application advice. T-nut cutter for MGMN 300 indexable inserts by Teknik Makina — 63 mm, L55 mm T-nut cutter designed for accurate T-slot milling with MGMN 300 indexable inserts, suitable for CNC milling centres and tooling shops 63 mm cutting diameter Compatible with MGMN 300 inserts 20 mm shank for secure clamping Four cutting edges, 3 mm cutting height Faster, more accurate T-slot production The combination of a 63 mm cutting diameter and a compact 55 mm overall length delivers a stable cutting profile that reduces vibration and rework. In practice, this means shorter machining cycles and consistent slot geometry across batches. The geometry is optimised for repeatable T-slot milling, allowing production teams to rely on predictable tolerances and minimise secondary finishing. Cost-effective tooling through standard inserts Compatibility with MGMN 300 indexable inserts—manufactured by Korloy—keeps running costs low because inserts are widely available and easy to replace. The cutter accepts the standard insert form, enabling quick index changes and extended tool life through economical insert rotation. The presence of four cutting edges and a 3 mm cutting height provides an effective balance between material removal rate and surface quality. Stable clamping and process reliability A 20 mm shank ensures secure clamping in standard toolholders and helps maintain concentricity at elevated feed rates. The solid shank design contributes to process reliability on both small-batch work and continuous production runs. Identified as TKC321TM, the tool is compact and lightweight while engineered for consistent repeatability on CNC machines. Practical fit for workshop and production needs This cutter is suited to tooling shops and production lines that require dependable T-slot generation with minimal setup time. With a straightforward insert interface and a compact overall design, it integrates smoothly into existing tool sets and changeover routines. For specialised applications or clarification on machining parameters, technical guidance is readily available to support successful implementation. For supply and technical advice on Teknik Makina T-slot cutters and compatibility with Korloy MGMN 300 inserts, contact Metav Werkzeuge in Emmerich for fast, reliable service and application guidance. Technical Data SKU: TKC321TM Label: 63mm T-Nut Fräser MGMN 300 L55mm Manufacturer: Teknik Makina Core dimensions Diameter: 63 mm Overall length: 55 mm Shank diameter: 20 mm Thread: 12 Weight: 0.132 kg Cutting edges: 4 Cutting height: 3 mm ECLASS: 21180605 Compatibility & features For MGMN 300 indexable inserts Compatible inserts manufacturer: Korloy Product category: T-nut cutter FAQ Which inserts fit this cutter? The cutter is designed for MGMN 300 indexable inserts; Korloy inserts in this format are compatible. What are the key dimensions to check for toolholder fit? Check the 20 mm shank diameter and the 55 mm overall length to ensure proper clamping and clearance. How many cutting edges does the tool have and what is the cutting height? The tool features four cutting edges with a 3 mm cutting height, offering a balance between removal rate and surface finish. What is the product SKU for ordering and reference? The product SKU is TKC321TM, which references the Teknik Makina T-nut cutter for MGMN 300 inserts. Is this cutter suitable for CNC milling centres? Yes; the compact geometry and secure shank make it suitable for standard CNC milling centres used in production and repair shops. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm T-Slot Cutter 2 Flute 5mm Cutting Height 25mm Shank 120mm Length - Teknik Makina
Take advantage of a robust combination of high cutting stability and fast servicing: the TKC307TM delivers a Ø63 mm cutting diameter on a 25 mm shank with two cutting edges and quick indexable inserts. Order the T-slot cutter directly via Metav Werkzeuge or ask the consultants for tailored application advice. T-slot milling cutter TKC307TM – T-nut cutter, Ø63 mm, 25 mm shank (Teknik Makina) The T-slot milling cutter TKC307TM is a purpose-built indexable tool for producing T-slots and T-nut profiles in workshop and production environments, designed for reliable fixture and table machining. Ø63 mm cutting diameter 25 mm shank for solid clamping Compatible with Korloy MGM 5C inserts Two cutting edges for steady engagement Consistent stability and precise slot geometry for production work The TKC307TM is engineered to provide stable cutting performance through a combination of a 25 mm shank and a broad Ø63 mm cutter body, which together reduce vibration and maintain slot geometry under load. With two cutting edges, the tool balances material removal and chip control, helping to achieve repeatable T-slot profiles. The 5 mm cutting height defines the standard slot engagement per pass and supports accurate depth control when machining fixture rails or assembly plates. These design choices prioritise predictable results and higher first-pass yields in serial or single-part production. Fast indexable system that reduces downtime and running costs The indexable concept fitted for Korloy MGM 5C inserts allows replacements without regrinding the tool body, so maintenance intervals are short and tooling overhead is reduced. Fixing is secured by an M8 torx screw and adjusted with a 6 mm Allen key, enabling quick and safe insert changes at the machine. At 0.529 kg, the cutter offers a manageable handling weight for tool changes while remaining rigid in the holder. This setup translates into lower total cost of ownership and fewer interruptions on busy production lines, supporting efficient workshop planning. Integrates with standard milling spindles and fixture setups The cutter’s 25 mm shank is compatible with common collet and chuck systems, easing retrofitting into existing milling centres and CNC workstations. With an overall length of 120 mm, the tool provides reach for recessed T-slot profiles while keeping overhang to a minimum for concentricity. The indexable format makes the tool suitable for a range of machining contexts where reproducibility and serviceability matter, from jigs and fixtures to machine-table refurbishments. Technical documentation and the available mounting hardware information support straightforward integration into production tooling arrays. For reliable T-slot machining with Teknik Makina quality, contact Metav Werkzeuge in Emmerich for personalised specification support and rapid supply — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: TKC307TM Manufacturer: Teknik Makina Facts Diameter: 63 mm Shank diameter: 25 mm Cutting height: 5 mm Number of cutting edges: 2 Overall length: 120 mm Weight: 0.529 kg Special features For indexable inserts: MGM 5C Compatible insert supplier: Korloy Torx screw: M8 Wrench: 6 mm Allen key FAQ What type of slots can be machined with this cutter? The TKC307TM is designed specifically for producing T-slots and T-nut profiles commonly used for fixtures and machine tables. Which inserts fit this cutter? This cutter accepts Korloy MGM 5C indexable inserts, allowing fast replacement without modifying the cutter body. What toolholder connection is required? A toolholder or collet compatible with a 25 mm shank is required to secure the cutter for machining operations. How deep can each pass cut reliably? The cutter has a 5 mm cutting height, which defines a typical engagement per pass; actual depth depends on workpiece setup and machining parameters. Is the TKC307TM suitable for retrofit into existing milling machines? Yes — the 25 mm shank and 120 mm overall length make the cutter straightforward to integrate into standard milling spindles and fixture arrangements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63mm T-Slot Cutter 8 Cutting Edges 120mm Overall Length 32mm Shank - Teknik Makina
Take advantage of the combination of high stability and straightforward insert compatibility to reduce setup time and increase throughput; the large Ø63 mm cutting diameter with a robust 32 mm shank delivers secure clamping and consistent run-out, while compatibility with SPMG 06 indexable inserts keeps tool changes fast — order via Metav Werkzeuge or contact our consultants for application advice. T-slot milling cutter TKC062TM by Teknik Makina — Ø63 mm, compatible with SPMG 06 inserts The T-slot milling cutter TKC062TM is designed for efficient machining of T-slots and similar profiles in industrial milling operations, combining a large cutting diameter with a solid shank for repeatable accuracy. Ø63 mm cutting diameter for standard T-slots Compatible with SPMG 06 indexable inserts Solid 32 mm shank for secure clamping 8 mm cutting height for deep T-slot profiles Stable geometry for precise T-slot production The cutter’s large Ø63 mm diameter and substantial 32 mm shank provide a stable machine interface that minimises vibration and run-out during cutting. This mechanical stability translates directly into improved surface finish and longer insert life, which is particularly important in production environments where consistency is required shift after shift. With a balanced 120 mm overall length, the tool is long enough for most T-slot operations while keeping deflection low; the tool’s mass (0.874 kg) further aids vibration damping without imposing excessive load on the spindle. These design choices reduce scrap rates and support predictable, high-yield machining cycles. Quick insert changes and broad insert compatibility Changeover is designed to be fast and reliable: the cutter accepts SPMG 06 indexable inserts from suppliers such as Taegutec, secured with M2.2x5 Torx screws that are tightened with a T7 key. The accessible screw arrangement and standardised insert format mean downtimes are minimised — a clear efficiency gain for batch production and job shop workflows. The tool features a 45 mm cutting length and a reduced cutting-shank diameter of 31.5 mm around the insert area to ensure correct insert seating and optimal chip evacuation. For operations using industry-standard indexable plates, this cutter simplifies logistics and reduces the number of special inserts required in inventory. Built for productivity and workshop reliability With an 8 mm cutting height the cutter makes deep T-slot profiles in fewer passes, lowering cycle times while preserving insert life through conservative engagement geometry. The combination of a stiff shank and a well-proportioned head means the tool performs reliably on vertical milling machines and machining centres that handle heavy-duty slotting tasks. Material-specific recommendations are derived from insert selection rather than cutter geometry, so pairing the tool with the correct SPMG 06 grade achieves a balance between cutting speed and tool life across cast iron, alloyed steels and non-ferrous materials. The result is a robust solution that supports continuous production and contributes to a more predictable manufacturing schedule. Contact Metav Werkzeuge for tailored machining recommendations on the Teknik Makina TKC062TM T-slot milling cutter — technical advice and order processing are available from our Emmerich team at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: TKC062TM Manufacturer: Teknik Makina Product: T-slot milling cutter Compatible inserts: SPMG 06 Insert supplier reference: Taegutec Diameter: 63 mm Shank diameter: 32 mm Cutting shank diameter: 31.5 mm Cutting length (shank): 45 mm Cutting height: 8 mm Overall length: 120 mm Weight: 0.874 kg Torx screw: M2.2x5 Torx key: T7 For use with indexable inserts Designed for T-slot machining Solid shank design for stability Accessible screw fixation for fast changeovers FAQ Which insert size and type does the cutter use? The TKC062TM is configured for SPMG 06 indexable inserts; pairing with a Taegutec grade suited to the workpiece material provides the best balance between cutting speed and tool life. What are the key dimensions for clamping and setup? Critical setup dimensions include a 32 mm shank diameter, 120 mm overall length and a 63 mm cutting diameter; these figures are intended to guide tooling holders and clamping decisions. How deep can the cutter machine a T-slot in one pass? The cutter offers an 8 mm cutting height; actual depth per pass should be selected according to the chosen insert grade and machine capability to maintain insert life and surface quality. Are the fixing screws and key standardised? Yes, the cutter uses M2.2x5 Torx screws tightened with a T7 key, which simplifies maintenance and reduces the need for specialised screw formats. Is this cutter suitable for batch production? The combination of a solid shank, standard insert format and quick-change fixation makes the tool well suited to repetitive production work where setup time and repeatability matter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm T-Slot Cutter 8 Teeth 31.5mm Cutting Dia, 45mm Cutting Length - Teknik Makina
Take advantage of a robust, high-capacity milling solution that pairs efficient material removal with secure clamping and proven indexable insert compatibility; the combination of a 63 mm cutting diameter, 8 cutting edges and a 32 mm shank supports continuous workshop production with predictable results — contact Metav Werkzeuge for procurement or technical clarification. T-slot cutter TKC052TM — 63 mm diameter, 8 cutting edges (Teknik Makina) T-slot cutter TKC052TM for machining T-slots and grooves in standard milling setups, designed for indexable inserts and stable mounting in typical toolholders 63 mm diameter for wide T-slots 8 cutting edges for rapid material removal Compatible with SPMG 05 indexable inserts 32 mm shank for secure toolholder clamping Fast, stable machining thanks to balanced cutting geometry The milling head delivers high removal rates through its 8 cutting edges, which distribute cutting forces and reduce vibration during slotting operations. This geometry enables a consistent chip flow and helps maintain surface finish while shortening cycle times. The 63 mm outer diameter provides sufficient clearance for most standard T-slot profiles, while the moderate overall length of 120 mm keeps run-out low in the toolholder. Where indexable inserts are used, changeover is quick and repeatable, reducing downtime in batch or series production. Secure clamping and simple insert management for workshop efficiency A 32 mm shank ensures robust clamping in conventional toolholders and reduces the risk of movement under load, supporting stable cutting even at higher feed rates. The cutter accepts SPMG 05 indexable inserts (compatible with Taegutec), which simplifies inventory and allows selection of grade and coating to match the workpiece. Insert clamping employs M2x4.2 Torx screws and a T6 key, enabling reliable fixation with standard workshop tools; this arrangement reduces the chance of incorrect seating and speeds up maintenance cycles. Application fit and predictable performance for mixed machining tasks With a cutting height of 5 mm and a cutting length of 45 mm on the shaft, the tool is suited to producing shallow to medium-depth T-slots and finishing passes where dimensional control matters. The unit weight of 0.861 kg reflects a solid construction that resists deflection, supporting repeatable results in steel and lighter alloys when used within recommended parameters. For process planning, the tool’s compatibility with common indexable insert formats allows selection of coatings and grades to match throughput and surface requirements, so process engineers can balance productivity and tool life effectively. Should clarification be required, Metav Werkzeuge’s technical advisors are available to support selection and integration. Contact Metav Werkzeuge for tailored advice on tooling choices and to arrange supply of the Teknik Cutting Tools T-slot cutter TKC052TM for reliable workshop integration — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: TKC052TM Manufacturer: Teknik Cutting Tools (Teknik Makina) Product name: T-slot cutter TKC052TM Compatible insert type: SPMG 05 Compatible insert supplier: Taegutec Dimensions & core data Diameter: 63 mm Cutting edges: 8 Overall length: 120 mm Shank diameter: 32 mm Cutting length on shaft: 45 mm Cutting height: 5 mm Weight: 0.861 kg Special features Torx screw for inserts: M2x4.2 Torx key size: T6 Indexable-insert system for fast changeover Balanced multi-edge configuration for vibration control FAQ Which insert type fits this cutter? The cutter is designed for SPMG 05 indexable inserts; compatible grades from Taegutec can be used for different materials and surface requirements. What diameter and shank size does the tool have? The tool has a 63 mm cutting diameter and a 32 mm shank, providing stable clamping in common toolholders for routine milling operations. How many cutting edges are available and what is the benefit? With 8 cutting edges, the tool offers distributed cutting forces for smoother operation and efficient material removal during T-slot milling. What fastening hardware is required for the inserts? Insert clamping is secured with M2x4.2 Torx screws tightened with a T6 key for reliable and repeatable seating. Is the cutter suitable for deep T-slots? The cutter provides a cutting height of 5 mm and a shaft cutting length of 45 mm; it is optimised for shallow to medium-depth T-slots and finishing passes rather than very deep profiles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm T-Slot Cutter 8 Teeth 45mm Cutting Length 120mm Overall Length, 32mm Shank - Teknik Makina
Take advantage of a robust T-slot milling solution that combines high material removal capability with precise insert compatibility to keep production moving. Choose the cutter for its stable Shank Ø 32 mm and 63 mm diameter, and contact Metav Werkzeuge for purchasing or technical advice. T-slot milling cutter TKC056TM — 63 mm diameter, 8 cutting edges (Teknik Cutting Tools) The T-slot milling cutter TKC056TM is a specialised tool for machining T-slots and undercut profiles in industrial milling operations, designed for use with indexable inserts in heavy-duty and repetitive production environments 63 mm diameter for wide T-slots 8 cutting edges for high material removal Shank Ø 32 mm for secure clamping Compatible with SPMG 06 indexable inserts High-efficiency cutting for stable production Engineered to increase throughput, the cutter’s 63 mm diameter combined with 8 cutting edges delivers a high removal rate while maintaining a consistent profile. The geometry is optimised for T-slot formation, so chips are managed effectively and cycle times are reduced. This configuration supports reliable machining of slots where repeatability matters, making the tool suitable for series production and component preparation in metalworking shops. Precise system compatibility and simple insert handling The tool is designed for use with SPMG 06 indexable inserts and is compatible with Taegutec-type plates, allowing straightforward insert replacement and tooling standardisation across machines. The cutter secures inserts with a Torx screw M2,2x5 and uses a T7 key, ensuring repeatable clamping torque and minimal setup variation. The defined cutting length 45 mm and cutting height 6 mm give clear parameters for depth control and slot geometry, so process planners can integrate the cutter into CAM programmes with confidence. Robust design for workshop integration and reliable handling With a Shank Ø 32 mm and overall length 120 mm, the cutter balances rigidity and reach for common milling setups. The reduced risk of vibration and the clear dimensional data simplify clamping decisions and fixture design. At a weight of 0.85 kg, handling and tool changes remain practical in a busy workshop. The product’s measured specifications support predictable tool life planning and spare-part provisioning, helping maintenance and purchasing teams keep operations on schedule. For technical consultation or to order the Teknik Cutting Tools T-slot milling cutter TKC056TM, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 — Metav’s specialists will advise on insert selection and machine adaptation Technical data Article number: TKC056TM Name: T-slot milling cutter (T-Nut Fräser) Facts Diameter: 63 mm Cutting edges: 8 Shank diameter: 32 mm Cutting length (shaft): 45 mm Cutting shank diameter: 31.5 mm Cutting height: 6 mm Overall length: 120 mm Weight: 0.85 kg Special features For indexable inserts: SPMG 06 Compatible with Taegutec inserts Torx screw: M2,2x5 Torx key: T7 FAQ Which inserts are compatible with this cutter? The cutter accepts SPMG 06 indexable inserts and is compatible with Taegutec insert types for standardised replacement. What are the key dimensions to consider for fixture design? Important dimensions include the 63 mm diameter, Shank Ø 32 mm, cutting length 45 mm, and overall length 120 mm for clamping and reach planning. How are the inserts secured? Inserts are fastened with a Torx screw M2,2x5; the required key size is T7, ensuring stable and repeatable clamping. Is this cutter suitable for series production? Yes — the combination of multiple cutting edges and a robust shank supports repeatable T-slot machining in production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
63mm T‑Slot Cutter 8 Flutes, 32mm Shank 19.5mm Cutting Shank, CCMT 0602 Compatible - Teknik Makina
Take advantage of a tool that combines high material removal with precise groove control: the cutter’s Ø63 mm diameter and 8 cutting edges deliver consistent T-slot profiles while the robust shank Ø32 mm ensures stable clamping for industrial milling operations. Order via Metav Werkzeuge or request procurement support from our consultants for fast, reliable supply. Teknik Makina T-slot milling cutter »T-Nut Fräser« – indexable-insert cutter, Ø63 mm, for CCMT 0602 Teknik Makina T-slot milling cutter designed for machining T-slots and nut grooves in industrial and workshop environments, compatible with CCMT 0602 indexable inserts and built for repeatable precision. T-slot milling cutter Ø63 mm diameter Accepts CCMT 0602 indexable inserts 8 cutting edges for efficient material removal Shank Ø32 mm with 37 mm cutting shank Consistent groove geometry for reliable assembly lines The T-slot milling cutter provides repeatable groove profiles essential for fixtures, machine tables and assembly components. With a Ø63 mm cutting body and a defined cutting height of 9 mm, the tool produces uniform T-slots that reduce downstream fitting time and scrap rates. The combination of diameter and cutting height ensures stable chip evacuation and predictable chip thickness, which in turn supports consistent surface finish and tolerance adherence during serial production. Proven indexable system for economical performance Designed for use with CCMT 0602 indexable inserts, this cutter lowers running costs through fast insert changes and consistent cutting geometry. The use of well-known insert grades allows optimisation of cutting parameters for different materials; the indexable system enables rapid recovery from wear without regrinding, leading to higher uptime and controlled unit costs. The tool’s multiple cutting edges mean each indexable plate contributes to effective stock removal and improved cycle times in repetitive milling tasks. Robust shank and secure assembly for vibration control A shank Ø32 mm provides a rigid connection to the holder and reduces deflection during moderate to heavy cuts. The reduced vibration improves tool life and part accuracy; clamping stability is further supported by the specified Torx screw M2.5×5.5 and T8 key interface for the insert seat, ensuring secure fixation of inserts under load. The effective arrangement of the cutting edges around the body helps to balance radial forces, which is advantageous when integrating the cutter into CNC routines where consistent positional accuracy is required. Practical workshop integration and maintenance advantages The cutter’s layout and overall length of 125 mm make it straightforward to program into tool libraries and set up on milling machines with standard holders. With 8 cutting edges distributed across the body and a shank cutting length of 37 mm, maintenance cycles are predictable and replacement logistics are simplified. The tool’s moderate mass (0.842 kg) balances rigidity with handling convenience during tool changes, while the indexable system supports a straightforward spare-parts strategy for procurement teams. For specification checks, procurement guidance or delivery planning for Teknik Cutting Tools’ T-slot milling cutters, contact Metav Werkzeuge in Emmerich for expert assistance and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TKC120TM Manufacturer: Teknik Makina SKU: TKC120TM Facts Diameter: 63 mm Cutting edges: 8 Overall length: 125 mm Cutting height: 9 mm Special features For indexable inserts: CCMT 0602 Shank diameter: 32 mm Shank cutting length: 37 mm Shank diameter at cutting head: 19.5 mm Torx screw: M2.5×5.5 Torx key: T8 Weight: 0.842 kg FAQ What materials can this cutter machine effectively? The T-slot milling cutter is configured for general industrial use; tool performance depends on the chosen CCMT 0602 insert grade and machining parameters to suit steel, aluminium or other machinable substrates. How many cutting edges does the tool use and what is the benefit? The tool has 8 cutting edges, which distribute cutting forces for improved surface finish and higher stock-removal rates in serial milling operations. Which insert type is compatible with this cutter? CCMT 0602 indexable inserts are the specified fitment, enabling quick index changes and flexible grade selection for different applications. What are the key dimensions for setting up the cutter in a tool library? Key set-up values include a diameter of 63 mm, overall length 125 mm, shank diameter 32 mm and cutting height 9 mm; these dimensions support programmed offsets and holder selection. Is the cutter suitable for heavy roughing or fine finishing? With the correct CCMT insert grade and appropriate feeds, the cutter can be used for both moderate roughing and semi-finishing tasks; insert choice determines the final surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Reduce downtime with reliable internal-coolant t-slot cutters
A t-slot cutter is engineered to produce the wider, undercut section of a T-shaped slot commonly used in machine tables, workholding plates and industrial fixtures, while its shank runs through a previously made, narrower guide groove. Where external machine nozzles spray coolant from outside, machining of enclosed T-slots can leave the cutting edges starved of lubricant and the chips trapped; this increases heat, tool wear and the risk of sudden breakage. T-slot cutters with internal coolant avoid these issues by routing cooling fluid through deep shaft channels directly to the cutting edges.
How the tool works and where it is indispensable
The cutter is designed so that the enclosed cutting zone receives coolant under pressure via internal bores, which flush chips out of the narrow, enclosed cavity and remove process heat at the hidden engagement point. This technical design is especially necessary for t-slot milling operations in heavy-duty clamping plates, machine tables and fixtures where the tool is largely surrounded by material and external coolant cannot reach the cutting edges reliably.
Key operational benefits you can expect
- improved tool life through targeted cooling at the cutting edge
- consistent chip evacuation thanks to high-pressure internal coolant flow
- reduced risk of tool breakage by avoiding chip jamming and thermal overload
- better dimensional accuracy because heat and swarf are controlled at the source
- fewer rejects and less rework, increasing throughput in production
Metav as your practical partner for procurement and advice
Metav acts as a precision partner that makes high-accuracy tooling accessible for workshops and industry. From our Emmerich base we combine decades of expertise with a broad range of solutions, supported by over 48,000 customers and more than 250,000 products. For buyers seeking reliable supply and pragmatic technical guidance, Metav provides straightforward advice on selecting the right t-slot cutter or t-nut cutter and can clarify compatibility with existing setups.
FAQ
What is the main advantage of a t-slot cutter with internal coolant compared with external cooling?
A t-slot cutter with internal coolant delivers the coolant directly to the cutting edges through internal bores and channels, which is essential because the cutter works deeply and is largely enclosed by material; this prevents the coolant starvation and chip entrapment that commonly occur when external machine nozzles are used.
In which situations is a t-slot cutter absolutely required?
t-slot cutters are required for milling the undercut portion of T-shaped slots in machine tables, workholding plates and industrial fixtures where reliable chip evacuation and heat removal at the hidden engagement point are critical to prevent tool failure.
How does internal coolant affect chip removal and tool safety?
Internal coolant provides a strong flushing action that carries chips out of the narrow cavity, preventing chip jamming, avoiding overcutting on residual swarf and significantly reducing the likelihood of sudden tool breakage due to overload.
Can Metav advise on choosing the right t-slot milling cutter for a specific clamping system?
Yes. Metav’s technical team can advise on selecting the appropriate t-slot cutter or t-nut cutter for your machine table or fixture configuration and explain how internal coolant channels and shank guidance will interact with your existing guide groove.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com