Precise T-slot cutters for reliable fixture machining
T-slot cutters are engineered to produce the undercut head of a T-shaped slot in machine tables and fixture plates, providing secure, adjustable clamping for workpieces while the cutter shaft runs in a pre-machined guide. Using cutters with internal coolant channels ensures consistent delivery of high-pressure coolant directly to the cutting edges, which effectively removes chips from the enclosed cutting zone and dissipates process heat to prevent chip jamming and tool breakage. These tools are essential when machining hardened or long-duration setups where external coolant is ineffective, offering improved tool life, repeatable slot geometry and reduced downtime through reliable chip evacuation. The category also covers matching variants and complementary tooling such as twist drill adapters and precision caliper-referenced setups for precise positioning.
35mm T-Nut Cutter for RD-- 0702 Indexable Inserts L120mm, 5 Cutting Edges - Teknik Makina
Take advantage of a tool that combines precise 35 mm cutting capacity with compatibility for RD-- 0702 indexable inserts and a robust 25 mm shank to maintain stable, repeatable T-slot machining; order the cutter directly via Metav Werkzeuge or ask our consultants for application advice. T-slot cutter TKC176TM – 35 mm diameter, 120 mm overall length (Teknik Makina) The T-slot cutter TKC176TM is a purpose-built T-slot milling tool for machining standard T-slots with RD-- 0702 indexable inserts, engineered for production and workshop use with a 25 mm shank for secure clamping. 35 mm cutting diameter Compatible with RD-- 0702 inserts Five cutting edges for smooth material removal 25 mm shank for stable toolholding Precision and proven insert compatibility for consistent T-slot machining A dedicated T-slot milling cutter designed for repeatable results: the 35 mm cutting diameter in combination with support for RD-- 0702 indexable inserts yields a predictable machining cycle and consistent slot geometry. Indexable inserts mean the cutting geometry is factory-ground and easily replaceable, which reduces variability between parts. The provision of five cutting edges on the head balances material removal and insert life, so operators benefit from longer edge life and fewer interruptions for tool changes. Stable clamping and controlled overhang for improved surface quality Tool rigidity directly affects surface finish and accuracy. The TKC176TM’s 25 mm shank and 120 mm overall length minimise deflection in typical toolholders, reducing chatter and improving slot surface quality. A heavier, well-balanced cutter—at approximately 0.452 kg—also contributes to smoother cutting dynamics, allowing higher feed stability and better concentricity in production runs. The result is fewer reworks and a more reliable process window for workshop and CNC applications. Quick serviceability and clear workshop handling for less downtime The cutter is configured for indexable insert use and secured with a Torx screw (M2.5x5.5), serviceable with a T8 Torx key for swift insert changes and tightening. Quick insert replacement shortens maintenance time and keeps machines running longer between interventions. The product SKU TKC176TM identifies the exact configuration for reordering and inventory control, simplifying purchasing and ensuring the correct tool version is always used on the shop floor. Choose Teknik Makina quality: request the TKC176TM through Metav Werkzeuge for reliable, repeatable T-slot production or consult our specialists at Metav Werkzeuge for tailored machining recommendations via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: TKC176TM Label: 35mm T-Nut Fräser RD-- 0702 L120mm Manufacturer: Teknik Makina ECLASS: 21180605 Facts Diameter: 35 mm Overall length: 120 mm Shank diameter: 25 mm Shank cutting length: 25 mm Cutting edges: 5 Weight: 0.452 kg Special features Compatible with RD-- 0702 indexable inserts Torx screw: M2.5x5.5 Torx key: T8 Product type: T-slot milling cutter FAQ Which indexable inserts are required for this cutter? The cutter is designed for RD-- 0702 indexable inserts; this configuration ensures the correct cutting geometry and straightforward replacement. How many cutting edges does the tool have and what is the benefit? The tool features five cutting edges, which balances material removal rate with insert life, offering smooth cutting and extended service intervals for the TKC176TM milling cutter. What shank size is recommended for secure clamping? A 25 mm shank is provided to ensure stable toolholding; use a compatible collet or holder matched to a 25 mm shank for optimal rigidity and reduced runout. How is the insert secured and which tool is needed for changeover? Inserts are secured with a Torx screw sized M2.5x5.5 and require a T8 Torx key for safe and quick changeover, minimising downtime during maintenance. Is the tool suited for workshop and small-series production? Yes; the combination of a 35 mm cutting diameter, robust 25 mm shank and indexable inserts makes the cutter suitable for both workshop tasks and small to medium production runs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm T-Nut Cutter L120mm 2 Flute 20mm Shank, Compatible with Korloy - Teknik Makina
Take advantage of precise slot geometry and robust clamping for reliable fixture creation; the combination of a 35 mm diameter cutting head and a 20 mm shank delivers stable machining with reduced run-out. Order the tool directly via Metav Werkzeuge or consult our specialists if further specification is required. T-slot cutter TKC295TM — 35 mm diameter, 120 mm overall length (Teknik Makina) The T-slot cutter TKC295TM is a purpose-built T-slot milling cutter for producing standard T-slots in machine tables, fixture plates and modular tooling systems. 35 mm diameter for standard T-slots 120 mm overall length for deeper reach Shank Ø 20 mm for secure clamping Korloy-compatible indexable inserts Reliable T-slot machining for secure fixturing A cutter suited to demanding jigs and fixtures needs consistent geometry; this T-slot milling cutter provides exactly that through its 35 mm diameter and precise cutting geometry. The two-flute design with 2 cutting edges and a 2 mm cutting edge height balances chip evacuation and surface finish: fewer flutes ease chip clearance in slotting operations, while the measured edge height defines the finished slot profile. For production-oriented environments, this combination reduces rework and helps maintain positional accuracy of clamped components, so alignment of tooling and workpieces remains repeatable across long runs. Stability, clamping and long-reach capability Longer reach operations demand a rigid connection between tool and spindle; the Shank Ø 20 mm and 120 mm overall length are specified to keep deflection low while still allowing access to deeper table slots. The insert clamping system is designed around a 6 mm Allen key interface, ensuring reliable seating of the cutting insert and fast clamp action during maintenance. Reduced run-out from a correctly sized shank and robust clamping improves tool life and delivers a consistent surface on the slot faces, which is particularly important where precision fixturing and repeatable component seating are required. Korloy compatibility and efficient workshop workflows The cutter accepts Korloy-compatible inserts, offering the advantages of a widely available indexable system: quick insert replacement, predictable cutting performance and the option to select grades appropriate to the workpiece. Compatibility with standard inserts simplifies inventory and shortens downtime when regrinding or replacement is needed. For production planners and workshop managers, the result is a pragmatic mix of performance and serviceability — a tool that supports continuous operation and reduces the need for specialised reconditioning. For dependable T-slot production choose the Teknik Makina TKC295TM and contact Metav Werkzeuge for availability and application guidance — Metav Werkzeuge can advise on suitable insert grades and holder requirements to match individual machining needs. Technical data Article number: TKC295TM Product: T-slot cutter Label: 35mm T-Nut Fräser L120mm Manufacturer: Teknik Makina eClass: 21180605 Core dimensions Diameter: 35 mm Overall length: 120 mm Shank diameter: 20 mm Cutting edges: 2 Cutting edge height: 2 mm Features & compatibility Korloy-compatible inserts 6 mm Allen key clamping SKU: TKC295TM Product type: T-slot cutter FAQ What slot size is this cutter intended to produce? The cutter is designed to machine T-slots corresponding to a 35 mm diameter head, which defines the standard slot profile for fixture and table applications when used with the correct insert geometry. What shank and holder are required for stable machining? A tool holder or collet suitable for a 20 mm shank is required; using a correctly matched holder for the TKC295TM ensures minimal run-out and consistent finish. How are the inserts secured and changed? Insert clamping is performed with a 6 mm Allen key interface; the system used on the TKC295TM provides secure seating and straightforward insert replacement to keep downtime low. Which insert brand is compatible with this cutter? The cutter accepts Korloy-compatible inserts, allowing the use of readily available grades for a range of workpiece materials and cutting conditions. How many cutting edges does the tool have and why does that matter? The tool features 2 cutting edges; this two-flute arrangement improves chip evacuation in slotting operations and typically yields a good balance between material removal rate and surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
35mm T-Slot Cutter 4 Flutes 52mm Cutting Length, CCMT Insert Compatible - Teknik Makina
Take advantage of robust stability and insert compatibility for consistent T-slot machining — the combination of a solid 25 mm shank, a 35 mm cutting diameter and compatibility with CCMT 09T3 indexable inserts supports efficient production cycles and repeatable slot geometry. Order the cutter directly via Metav Werkzeuge or request application advice from their consultants. T-slot cutter TKC104TM by Teknik Makina — 35 mm, 4 cutting edges The T-slot cutter TKC104TM is a precision milling tool for creating accurate T-slots using indexable inserts; engineered for stable clamping and repeatable results in CNC milling applications 35 mm cutting diameter Solid 25 mm shank Compatible with CCMT 09T3 inserts Four cutting edges for smooth cuts Stable support for precision T-slot production The tool is built around a 25 mm shank that increases rigidity during machining, which directly reduces vibration and improves repeatability when producing T-slots. A stable holder translates into more consistent slot geometries and reduced rework, so machining cycles remain predictable. Combining a robust shank with a 100 mm overall length balances reach and stiffness, permitting access into typical workpieces without compromising stability. The reduced runout achieved by a correctly matched holder supports longer insert life and steadier surface quality. Efficient indexable-insert system for predictable throughput This cutter accepts CCMT 09T3 indexable inserts, enabling quick insert changes and consistent cutting performance across production batches. With four cutting edges, each cutting pass distributes load evenly and helps maintain uniform chip formation, which improves cycle times and tool life compared with single-edge solutions. The design supports predictable maintenance planning: inserts can be rotated or replaced without removing the cutter from the spindle, so downtime is minimised and machining cells remain productive. The cutter’s geometry is tuned for stable chip evacuation and steady feedrates on conventional milling strategies. Setup guidance and longevity-focused maintenance Key dimensions such as the 35 mm diameter, cutting height 15 mm and the 52 mm shank cutting length allow straightforward integration into existing tool lists and fixture setups. Selecting the correct clamping and advising on torque for the securing screw (Torx M3.5x9) ensures secure mounting and reduces the likelihood of assembly-induced runout. Regular inspection of insert seating and adherence to recommended feed per tooth will safeguard surface finish and prolong service intervals. For workshops seeking a balance of accessibility and precision, this cutter is a practical choice that supports steady production rhythms while maintaining component tolerances. For production environments requiring reliable T-slot milling, contact Metav Werkzeuge for technical clarification or to order the Teknik Makina TKC104TM — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange specification support and delivery Technical data SKU: TKC104TM Manufacturer: Teknik Makina Designation: T-slot cutter Key dimensions Cutting diameter: 35 mm Overall length: 100 mm Shank diameter: 25 mm Shank cutting length: 52 mm Cutting-part diameter: 14 mm Cutting height: 15 mm Number of cutting edges: 4 Weight: 0.447 kg Features & compatibility For indexable inserts: CCMT 09T3 Torx screw: M3.5x9 Torx key size: T15 Intended for T-slot milling on milling centres FAQ Which insert type is required for this cutter? The TKC104TM uses CCMT 09T3 indexable inserts, providing fast replacement and consistent cutting geometry. What is the shank diameter and is it suitable for standard holders? Shank diameter is 25 mm; the straight shank suits common collet and toolholder systems that accept this diameter. How many cutting edges does the cutter have and what is the benefit? The cutter features four cutting edges, which balance load distribution and improve chip evacuation for smoother slot walls. What are the key dimensions to consider when setting up the tool? Relevant dimensions include a 35 mm cutting diameter, 100 mm overall length and cutting height of 15 mm for correct fixture and depth planning. Is a specific screw or key required for assembly? A securing screw of specification M3.5x9 (Torx) and a T15 key are noted for the tool’s clamping hardware. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
39mm Chamfer Mill TCMT Inserts 36mm Cutting Height, 20mm Shank - Teknik Makina
Benefit from a robust indexable design with a Ø39 mm cutting diameter and 36 mm cutting height for reliable chamfering and minimal downtime; order the chamfer cutter directly via Metav Werkzeuge or consult our technical advisors for application support. Chamfer cutter S343TM — indexable-insert cutter, Ø39 mm, Teknik Makina The Chamfer cutter S343TM is an indexable-insert milling tool engineered for precise chamfering and bevel preparation in metalworking applications. Indexable system for TCMT 16T3 inserts Ø 39 mm diameter for medium chamfers 36 mm cutting height for deep chamfers 20 mm shank for stable clamping Faster chamfering with replaceable inserts The indexable concept offers a clear production advantage: rapid insert changes lead to reduced downtime and lower per-part costs compared with solid-tool replacements. Fitted for TCMT 16T3 inserts, the cutter accepts commonly available carbide inserts, enabling a quick insert change routine that is compatible with standard workshop stocking practices. This design supports steady throughput in repetitive chamfering tasks and helps maintain predictable edge quality across batches. Stable clamping for consistent edge quality A robust tooling foundation improves process reliability. The combination of a 20 mm shank and a tool Ø39 mm body keeps the cutter rigid in the holder, which reduces vibration and preserves surface finish. With a 36 mm cutting height and two cutting edges, the geometry provides steady material engagement for chamfers and bevels; the included 30° and 60° chamfer options allow selection of the best edge angle for a given part design. Consistent clamping and predictable chip formation translate into fewer reworks and a more controlled machining process. Practical workshop handling and maintenance Maintenance is straightforward: inserts are secured with an M3.5x8.5 Torx screw and serviced using a T15 key, simplifying routine changeover and reducing toolroom time. The tool’s 100 mm total length and compact mass (approx. 0.356 kg) make it easy to handle during toolprep and mounting, while the indexable concept lowers overall tooling inventory by allowing one cutter body to serve multiple insert life cycles. For production environments that value both uptime and cost-efficiency, this cutter forms a pragmatic part of a modular tooling strategy. Secure Teknik Cutting Tools' chamfer cutter S343TM through Metav Werkzeuge for dependable stock and application advice — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for specification assistance and order coordination Technical data Article number: S343TM Manufacturer: Teknik Makina SKU: S343TM Facts Diameter: 39 mm Shank diameter: 20 mm Cutting height: 36 mm Total length: 100 mm Cutting edges: 2 Weight: 0.356 kg Special features For indexable inserts TCMT 16T3 Chamfer angles: 30° and 60° Torx screw: M3.5x8.5 Torx key size: T15 FAQ What inserts are compatible with this cutter? The cutter is designed for TCMT 16T3 indexable inserts; TCMT 16T3 inserts fit the S343TM cutter and are commonly available from insert suppliers. How are inserts secured and changed? Inserts on the S343TM are fastened with an M3.5x8.5 Torx screw and require a T15 Torx key for secure and repeatable replacement. Which chamfer angles does the tool provide? The cutter features geometries for 30° and 60° chamfers, enabling straightforward selection of the desired edge profile for bevel preparation. Is the shank suitable for standard tool holders? The 20 mm shank and 100 mm overall length are compatible with holders accepting 20 mm shanks; the rigid shank supports stable clamping and consistent machining results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm T-Nut Cutter 170mm Overall Length, 25mm Shank, 2 Flutes - Teknik Makina
Take advantage of the combination of a 40 mm cutting diameter, a 25 mm shank and a two‑edge geometry for efficient, accurate T‑slot machining; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. T-slot cutter TKC298TM — 40 mm diameter, 2 cutting edges (Teknik Makina) The T-slot cutter TKC298TM is a precision milling tool designed for producing and finishing T‑slots in fixtures and machine tables, offering stable clamping and compatibility with Korloy indexable inserts. 40 mm diameter for standard T‑slots 25 mm shank for secure clamping Two cutting edges for smooth surfaces Compatible with Korloy indexable inserts Precise geometry for clean T‑slot profiles and high material removal rates The cutter’s 40 mm diameter combined with a compact head profile delivers consistent T‑slot dimensions while reducing the number of passes required. The tool’s two cutting edges are optimised to balance cutting force and surface finish, which helps to limit chatter in horizontal and vertical milling operations. For those less familiar with tool geometry: fewer, well‑sharpened edges often mean easier chip evacuation and a better surface on the flanks of the slot. This results in a more predictable machining process and reduced rework. Robust shank and length for vibration resistance and reliable clamping A 25 mm shank provides a substantial contact area for collet or chuck mounting, improving rigidity during plunge and peripheral milling. The 170 mm overall length offers reach for deeper setups without compromising stability when properly clamped. Greater rigidity directly supports dimensional repeatability and prolongs insert life, so production runs remain consistent. The combination of shank diameter and tool length helps to keep run‑out low, which is crucial when producing tight‑tolerance slots. Serviceable insert system and maintenance simplicity The cutter is prepared for indexable inserts from Korloy, enabling quick insert changes and cost‑effective edge renewal. The cutter head accepts standard screws tightened with a 6 mm Allen key, so maintenance and insert replacement are straightforward on the shop floor. Using indexable inserts reduces downtime compared with resharpening solid heads and allows selection of grades tailored to the workpiece material and cutting conditions, giving production planners flexibility without requiring new tool bodies. Designed for workshop efficiency and predictable results The tool’s compact head and two‑edge configuration aim to reduce cycle times while maintaining a quality surface on the slot flanks, supporting lean production goals. By prioritising mechanical stability and a proven insert platform, the cutter helps mills and toolrooms streamline tooling stock and simplify procurement decisions. Where compliance and traceability matter, the clear designation and SKU support inventory control and reordering. Contact Metav Werkzeuge for tailored technical guidance on the Teknik Cutting Tools T‑slot cutter TKC298TM, request recommended insert grades for specific applications or order through our team at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TKC298TM Label: 40mm T-Nut Fräser L170mm ECLASS: 21180605 Manufacturer: Teknik Makina Numbers / core technical data Diameter: 40 mm Overall length: 170 mm Shank diameter: 25 mm Number of cutting edges: 2 Cutting edge height: 2 mm Special features / versions Compatible with Korloy indexable inserts Hex key: 6 mm Allen Product type: T‑slot cutter UID: TKC298TM FAQ What insert system does the cutter accept? The cutter accepts Korloy indexable inserts; TKC298TM is supplied to work with standard Korloy insert geometries for T‑slot operations. What clamping shank does the tool use? The tool features a 25 mm shank designed for secure clamping in collets or chucks, improving rigidity for repeatable slot machining. How long is the tool and what reach does it provide? The overall length is 170 mm, offering sufficient reach for many fixture and machine‑table T‑slot applications while maintaining good stability when properly clamped. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm T-Nut Cutter 4 Flute, 20mm Shank 100mm Overall Length, M3.5 Lock Screw - Teknik Makina
Take advantage of a precise, durable tooling solution that combines a Ø40 mm cutting diameter with 4 cutting edges and a rigid 20 mm shank for steady T-slot production; order the cutter via Metav Werkzeuge or request tailored advice from our consultants. T-slot cutter TKC200TM — compatible with Ingersoll RHKW 1003, Ø40 mm, 4 flutes (Teknik Makina) T-slot cutter TKC200TM designed for machining T-slots and T-nuts with indexable inserts, suitable for industrial milling and CNC setups T-slot cutter TKC200TM by Teknik Makina Compatible with Ingersoll RHKW 1003 inserts Ø40 mm diameter with 4 cutting edges 20 mm shank and secure Torx M4x10 fixing Consistent T-slot geometry with indexable inserts The TKC200TM is built to deliver repeatable T-slot profiles by using indexable inserts (RHKW 1003), which allow fast edge changes and consistent geometry without regrinding. The combination of a Ø40 mm cutter body and 4 cutting edges ensures a balanced cut, reducing chatter and producing clean slot walls. Indexable inserts reduce downtime because worn edges are simply rotated or replaced, making this tooling choice efficient for batch production and repeated set-ups. Stable clamping for reduced vibration and improved tool life A 20 mm shank provides the rigidity required for stable milling, particularly when working on medium-duty steel components. The cutter is secured using a Torx M4x10 screw and a M3.5 locking screw, tightened with a T15 Torx key, which ensures a reliable clamp of the insert seat and minimises the risk of movement under load. The result is improved surface quality and extended insert life, achieved through a mechanically robust connection between cutter, insert and toolholder. Smooth integration into CNC tool systems and production workflows Designed for straightforward integration with common milling interfaces, this cutter is compatible with Ingersoll-manufactured inserts, simplifying procurement and tool management in mixed-tool shops. The modular nature of using indexable inserts means tooling inventories can be reduced while maintaining flexibility. Technical teams benefit from predictable set-up times and easy reconditioning of tooling components, supporting continuous production with minimal interruption. Contact Metav Werkzeuge for specification matching and to arrange the TKC200TM with the correct Ingersoll RHKW 1003 inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TKC200TM Manufacturer: Teknik Makina Brand: Teknik Makina Diameter: 40 mm Cutting edges: 4 Overall length: 100 mm Shank diameter: 20 mm Weight: 0.285 kg Insert type: RHKW 1003 Compatible insert maker: Ingersoll Locking screw: M3.5 Torx screw: M4x10 Torx key: T15 Application: T-slot / T-nut milling FAQ What inserts are recommended for this cutter? The cutter is specified for Ingersoll RHKW 1003 indexable inserts; these inserts are compatible with the cutter geometry and deliver the expected performance. Can the cutter be used in CNC milling machines? Yes, the TKC200TM is suitable for CNC milling when mounted in the correct toolholder and run at appropriate speeds for the selected insert grade and workpiece material. How is the insert secured in the cutter? An M4x10 Torx screw secures the insert seat while an M3.5 locking screw provides additional retention; a T15 Torx key is used for tightening. What benefits do indexable inserts provide over solid cutters? Indexable inserts allow rapid edge changes, predictable geometry, and lower downtime compared with solid cutters; replacement inserts restore cutting performance without regrinding. Is the shank size compatible with standard collets? The cutter features a 20 mm shank, which is compatible with standard collet and chuck systems designed for that shank diameter. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm T-Nut Cutter L120mm 2 Flute 25mm Shank - Teknik Makina
Benefit from precise T‑slot machining thanks to a 40 mm diameter cutter with a rigid 25 mm shank and simple insert replacement; order directly via Metav Werkzeuge or consult the technical advisors for application-specific guidance. T-slot cutter – 40 mm diameter, 120 mm overall length (Teknik Makina) The T-slot cutter is designed for reliable machining of T‑slots and grooves in industrial milling applications, engineered for insert-based cutting and compatible with Korloy inserts. 40 mm diameter for deep T‑slots 120 mm overall length for extended reach 25 mm shank for rigid clamping Compatible with Korloy inserts Consistent accuracy for repeatable slotting The milling tool delivers repeatable slot geometry through its 40 mm diameter and two cutting edges, which together reduce runout and vibration during cut‑in and slot finishing. The cutting edge height 2 mm supports precise seating of the slot head while limiting radial overcut, so machining tolerances remain stable across batches. This combination of geometry and edge height helps maintain slot profile integrity when multiple identical features are required. Quick insert changes reduce machine downtime Designed for insert‑based operation, the cutter accepts Korloy inserts, enabling fast replacement without regrinding. The clamping mechanism is served with a 6 Allen hex key for secure, repeatable tightening, while the 25 mm shank ensures the holder and spindle retain rigidity during high feed passes. Short tool change cycles translate directly into higher machine utilisation and lower handling time between operations. Robust reach and clean chip evacuation for efficient milling With a 120 mm overall length the tool reaches deeper pockets and accommodates typical fixturing arrangements without sacrificing stability. The two cutting edges balance material removal rate and chip control: fewer flutes increase chip space for effective evacuation, which supports continuous cutting in slot profiles. This geometry is beneficial where continuous, reliable slot production is required and contributes to a predictable cycle time per part. Practical guidance and typical uses for the TKC297TM The TKC297TM is suitable where T‑slots or slot heads must be produced using insert tooling; the tool type is commonly used in fixtures, machine beds and component assemblies requiring transverse grooves. Thanks to its insert compatibility and robust shank, the cutter is well suited to workshop and production environments where tool changes are frequent and setup consistency is essential. The SKU TKC297TM identifies this specific configuration for procurement and inventory control. Contact Metav Werkzeuge for tailored tooling advice and to secure the Teknik Makina TKC297TM T‑slot cutter — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: TKC297TM Label: 40 mm T‑slot cutter L120 mm Manufacturer: Teknik Makina Dimensions & core data Diameter: 40 mm Overall length: 120 mm Shank diameter: 25 mm Cutting edges: 2 Cutting edge height: 2 mm ECLASS: 21180605 Features & compatibility Compatible inserts: Korloy Hex key: 6 Allen Product type: T‑slot cutter UID: TKC297TM FAQ What insert types does the cutter accept? The cutter accepts Korloy inserts as listed; the TKC297TM is configured for standard Korloy indexable heads to simplify procurement and replacement. How is the cutter clamped and serviced? Clamping of the insert uses a 6 Allen hex key for secure tightening; the TKC297TM supports fast insert changes without full tool removal from the holder. What length and shank ensure rigidity for deep slots? The 120 mm overall length combined with a 25 mm shank provides the reach required for deeper slots while maintaining sufficient rigidity for stable machining. Which operations are best suited to this tool? The tool is intended for industrial T‑slot milling and groove production where insert‑based cutters are preferred for repeatable, high‑volume work. How is the product identified for ordering? Order using the SKU TKC297TM; the designation links the configuration, dimensions and Korloy compatibility for clear procurement. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm T-Slot Cutter 4 Flutes 110mm Total Length 25mm Shank, CCMT 09T3 Compatible - Teknik Makina
Combining a 40 mm cutter diameter with indexable CCMT 09T3 inserts and a sturdy 25 mm shank, this tool delivers efficient, repeatable T-slot machining; order the T-slot cutter directly via Metav Werkzeuge or consult the team for application advice. T-slot cutter — Teknik Makina, 40 mm diameter, CCMT 09T3 compatible T-slot cutter for precise T-slot and head-slot machining on milling centres and machining centres Compatible with CCMT 09T3 indexable inserts 40 mm cutter diameter for stable slotting 25 mm shank and 110 mm overall length Four cutting edges for balanced cutting forces Faster slot production with indexable inserts The cutter is designed around indexable inserts to reduce downtime and tooling costs. Using CCMT 09T3 inserts means only the insert needs replacement when worn, while the cutter body remains in service; this yields lower consumable expenditure and faster turnaround compared with solid cutters. The four-flute layout provides smoother chip evacuation and consistent cutting forces, which helps to maintain repeatable slot profiles and reduces cycle time in serial production. Stable clamping and runout control for accurate slots A robust 25 mm shank and a measured 110 mm overall length improve tool stability in the spindle, which translates into better surface quality and reduced vibration during T-slot operations. The cutter’s 40 mm diameter and cutting-edge height of 17 mm deliver the necessary engagement for typical T-slot geometries. These dimensions, together with the tool’s balanced geometry, support precise axial and radial positioning when machining fixtures or machine tables. Practical workshop benefits and maintenance ease Maintenance is simplified by the use of a single Torx fixing system: the cutter secures inserts with an M3.5x9 Torx screw and requires a T15 key for replacement, enabling quick index changes on the shop floor. The tool’s 0.509 kg mass and compact 110 mm length make it straightforward to handle and fit into typical toolholders. Compatibility with standard CCMT inserts ensures broad availability of grades for various materials and cooling strategies, offering flexibility without bespoke tooling investments. For procurement or machining consultation regarding the Teknik Makina T-slot cutter (TKC106TM), contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com for fast, expert support Technical data Article number: TKC106TM Manufacturer: Teknik Makina Facts Cutter diameter: 40 mm Number of cutting edges: 4 Overall length: 110 mm Shank diameter: 25 mm Cutting shank diameter: 20 mm Cutting length (shaft): 50 mm Cutting-edge height: 17 mm Weight: 0.509 kg Compatible inserts: CCMT 09T3 Torx screw: M3.5x9 Torx key: T15 Special features Indexable insert concept for low running costs Four-flute geometry for smooth chip flow Compact, balanced design for reduced vibration Straightforward maintenance with Torx fixing FAQ What inserts are used with this T-slot cutter? The cutter accepts CCMT 09T3 indexable inserts; this compatibility allows use of common carbide grades for different materials. What are the main dimensions and weight of the tool? Key dimensions: 40 mm cutter diameter, 25 mm shank, 110 mm overall length; weight 0.509 kg. Which screw and key are required for insert changes? Insert clamping uses an M3.5x9 Torx screw and a T15 Torx key for secure, repeatable fastening. Is the cutter suitable for high-volume production? The indexable-insert design and four-flute geometry make the cutter well suited to serial production where reduced downtime and consistent slot quality are needed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm T-Slot Cutter for TCMT 16T3 Indexable Inserts 3 Flute 55° Cutting Angle, Internal Coolant - Teknik Makina
High-capacity T‑slot machining combines a 40 mm diameter with internal coolant to cut cycle times and improve surface quality; the solid 32 mm shank and 250 mm overall length provide the rigidity needed for deep, repeatable slots. Order the T‑nut cutter directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. T‑nut cutter TKC172TM — 40 mm diameter, internal coolant (Teknik Makina) T‑nut cutter TKC172TM is a precision milling tool for producing T‑slots using TCMT 16T3 indexable inserts, engineered for industrial and workshop milling operations. 40 mm cutter diameter for wide T‑slots Internal coolant for improved chip evacuation Compatible with TCMT 16T3 indexable inserts 32 mm shank for rigid clamping, 250 mm overall Faster, repeatable T‑slot production for series work The TKC172TM is designed to deliver consistent results across repeated cycles. The 40 mm diameter and three cutting edges produce efficient material removal while the 55° cutting angle reduces cutting forces, enabling stable feeds on machine tables and fixtures. This results in a predictable machining process that supports lean production and shorter setup times. For shops focused on throughput, the cutter’s geometry translates directly into measurable productivity gains and consistent slot geometry. Coolant-fed cutting to extend insert life and improve chip control Built with internal coolant, the tool feeds cutting fluid directly to the cutting zone, improving chip evacuation and heat dissipation. This targeted cooling preserves the edge life of the TCMT 16T3 inserts and reduces thermal loading on the workpiece, which leads to better surface finish and fewer stoppages for insert changes. The combination of coolant delivery and a 32 mm shank increases process stability, lowering vibration and enabling higher material removal rates where appropriate. Practical insert system and secure retention for workshop ease Compatibility with TCMT 16T3 indexable inserts makes reconditioning straightforward and cost‑effective: inserts are changed quickly and the cutter body accommodates standard replacement parts. Retention is secured with a M3.5x8.5 Torx screw and a T15 Torx key, providing a reliable clamping interface that minimises downtime during maintenance. With an overall length of 250 mm, the tool reaches deeper slots without compromising rigidity, making it suitable for both fixture production and machine table maintenance tasks. For coolant‑fed, high‑stability T‑slot milling from Teknik Makina, request supply and application advice from Metav Werkzeuge — direct delivery from Emmerich and personalised consultancy are available to ensure the TKC172TM fits specific process needs. Technical data Article number: TKC172TM SKU: TKC172TM Manufacturer: Teknik Makina Product: T‑nut cutter Label: 40mm T‑Nut Fräser TCMT 16T3 L250mm mit Innenkühlung Facts Cutter diameter: 40 mm Shank diameter: 32 mm Overall length: 250 mm Cutting length (shank): 50 mm Weight: 1.465 kg Cutting edges: 3 Cutting angle: 55° Torx screw: M3.5x8.5 Special features Internal coolant For TCMT 16T3 indexable inserts Torx key: T15 Indexable insert system Robust shank for secure clamping FAQ Which inserts are compatible with this cutter? The cutter is compatible with TCMT 16T3 indexable inserts and is designed to accept standard TCMT seating for efficient replacement and consistent cutting geometry. How does internal coolant benefit machining performance? Internal coolant delivers fluid directly to the cutting zone; for the TKC172TM this improves chip evacuation, reduces thermal stress on the insert and workpiece, and can extend insert life. What clamping interface secures the inserts? Inserts are secured with a M3.5x8.5 Torx screw tightened using a T15 key, providing a reliable retention method that minimises downtime during insert changes. Is the tool suitable for deep T‑slots on machine tables? With a 250 mm overall length and a 32 mm shank the cutter provides the reach and rigidity required for deeper T‑slot machining while maintaining stable cutting conditions. How many cutting edges does the tool have and what is the cutting angle? The body carries three cutting edges and a 55° cutting angle, a combination that balances material removal with stable cutting forces for repeatable slot quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm T-Slot Cutter L65mm M16 Thread 4 Flutes 2mm Tooth Height - Teknik Makina
Benefit from stable, repeatable T-slot machining thanks to the combination of a Ø 40 mm cutting diameter and a 25 mm shank, delivering consistent slot geometry and secure clamping; order the cutter directly via Metav Werkzeuge or contact our consultants for application advice. T-slot milling cutter TKC268TM – Ø 40 mm, M16 threaded connection (Teknik Makina) T-slot milling cutter TKC268TM for precision slotting and profile machining in industrial milling and CNC operations. Ø 40 mm cutting diameter for consistent slots 25 mm shank for secure clamping M16 threaded connection for easy mounting Consistent slot geometry for reliable production The cutter is engineered to produce uniform T-slots with minimal variation. The Ø 40 mm diameter combined with a four-flute design ensures a balanced cut and reduced vibration, which supports repeatability across batches. Stable slot profiles reduce rework and downstream assembly issues, while the 65 mm overall length offers sufficient reach for deep or recessed slots without compromising rigidity. This consistency translates directly into fewer rejects and a smoother production flow. Stable clamping and efficient performance A 25 mm shank provides a robust interface for standard tool holders, improving concentricity and tool life under higher feed rates. The M16 thread facilitates secure attachment of modular heads or adapters, enabling quick changeovers and straightforward integration into existing setups. With a low mass of 0.164 kg, the cutter minimises dynamic imbalance, allowing higher spindle speeds and steady surface finish without excessive toolholder strain. Indexable system compatibility and straightforward maintenance The tool is compatible with Korloy indexable inserts, allowing fast insert changes and the use of proven carbide grades for diverse machining tasks. The two-millimetre cutting edge height provides a predictable cut depth per pass, simplifying process planning. Replacement inserts and routine checks keep the tool performing to specification, extending service intervals and reducing downtime. Technical documentation and insert selection guidance are available to support correct setup. Contact Metav Werkzeuge for tailored integration advice and supply from Emmerich – phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to discuss the TKC268TM and suitable insert grades Technical data Article number: TKC268TM Name: 40 mm T-slot milling cutter L 65 mm Manufacturer: Teknik Makina Core specifications Diameter: 40 mm Overall length: 65 mm Shank diameter: 25 mm Cutting edges: 4 Cutting edge height: 2 mm Thread: M16 Weight: 0.164 kg Special features T-slot milling cutter design Compatible with Korloy indexable inserts M16 threaded connection Four cutting edges for balanced cutting FAQ How is the cutter mounted? The cutter is mounted via its M16 thread and clamped using a toolholder accepting a 25 mm shank; the combination provides a secure and concentric setup for machining. Which inserts fit this tool? This tool accepts Korloy indexable inserts; the TKC268TM head is designed for quick insert changes and standard insert geometries. What are the key dimensions to consider when planning a job? Key dimensions are Ø 40 mm diameter and 65 mm overall length, with a 25 mm shank and a 2 mm cutting edge height influencing depth of cut and reach. How many cutting edges does the cutter have and what is the benefit? The cutter has four cutting edges, which produce a balanced cut, reduce vibration and improve surface finish, particularly at higher feeds. Is the cutter suitable for CNC milling operations? Yes, the cutter’s design and shank interface make it well suited for use in milling machines and machining centres where repeatable T-slot production is required. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No: 9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm T‑Slot Cutter 120mm Overall, 2 Flute, 60° Cutting Angle - Teknik Makina
Take advantage of precise T-slot milling with the robust 40 mm cutting diameter and a 25 mm shank for secure clamping; the result is reliable slot geometry and efficient cycle times. Order the cutter directly via Metav Werkzeuge or consult Metav's specialists for application-specific advice. T-slot cutter TKC249TM — 40 mm, L120 mm (Teknik Makina) A T-slot cutter designed for controlled T-slot milling in machine tables and profile systems. 40 mm cutting diameter 120 mm overall length 25 mm shank diameter Two cutting edges, 60° angle Increase throughput with consistent T-slot geometry The TKC249TM is engineered to deliver repeatable slot profiles through a combination of a 40 mm cutting diameter and two cutting edges, which balance material removal and surface finish. A 60° cutting angle helps define the slot flank geometry with reduced burr formation; this is especially beneficial where subsequent assembly or sliding fit is required. By selecting a cutter with these parameters, cycle times can be shortened while maintaining the dimensional consistency expected in serial production and precision workshops. Secure clamping for reduced runout and improved surface finish A 25 mm shank paired with a 120 mm overall length provides a stable interface with standard milling holders. Secure clamping of the shank reduces radial runout, which directly improves concentricity and prolongs tool life. Stability during cutting translates into better surface appearance of the machined slot and fewer rework operations, supporting leaner manufacturing processes and predictable results in repetitive machining tasks. Simple retention and maintenance for uninterrupted operation Retention and service are straightforward: the cutter uses a T15 key for the Torx screw and a M3.5x8.5 screw for insert or head retention. These standardised small parts simplify replacement and torque procedures, allowing maintenance to be performed quickly at the bench. The tool’s modest mass also makes handling and changeover fast, contributing to shorter set-up intervals and higher machine uptime in busy workshops. Optimised for workshop efficiency and adaptability Designed as a focused solution for T-slot creation, the cutter combines dimensional clarity with everyday usability. The geometry reduces secondary operations by producing a ready-to-use slot profile, which is particularly advantageous where time-to-assembly matters. Operators and production planners benefit from the cutter’s balanced specification: dimensional stability, predictable wear characteristics, and compatibility with common clamping systems help integrate the tool into existing machining routines without lengthy requalification. Contact Metav Werkzeuge for tailored application advice on the TKC249TM T-slot cutter and secure supply from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: TKC249TM Product: T-slot cutter Brand: Teknik Makina Label: 40 mm T-slot cutter L120 mm Core specifications Diameter: 40 mm Overall length: 120 mm Shank diameter: 25 mm Cutting length (shank): 30 mm Number of cutting edges: 2 Cutting angle: 60° Weight: 0.44 kg Materials & features Torx key: T15 Retention screw: M3.5x8.5 Article code: eClass 21180605 Product type: T-slot cutter UID: TKC249TM FAQ What slot diameter does the cutter produce? The cutter produces slots based on a 40 mm cutting diameter; the exact finished slot size depends on machine settings and depth of cut. Is the shank suitable for standard milling holders? The 25 mm shank is intended for secure clamping in common tool holders and collet chucks, providing reduced runout and stable cutting. How many cutting edges are on the tool and what is the angle? The tool has two cutting edges with a 60° cutting angle, a combination chosen to balance removal rate and surface finish for typical T-slot profiles. Which screw type secures the cutter components? Retention is via a Torx screw sized M3.5x8.5, tightened with a T15 Torx key as specified for the design. Can this cutter be used for long series production? Yes, the cutter’s stable geometry and 25 mm shank support repeatable results; regular inspection of the retention screw and cutting edges is recommended to sustain performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
40mm T‑Slot Cutter For MGMN200 Indexable Inserts, M16 Thread - Teknik Makina
Take advantage of the combination of precise compatibility with MGMN 200 indexable inserts, a compact 40 mm cutting diameter and a robust 25 mm shank for reliable, repeatable T-slot machining — order via Metav Werkzeuge or request expert advice from our consultants in Emmerich. T-slot cutter for MGMN 200 indexable inserts — 40 mm, L65 mm (Teknik Makina) A T-slot cutter designed to machine T-nuts and T-slots using MGMN 200 indexable inserts, optimised for workshop and small-series production. 40 mm cutting diameter for standard T-slots Compatible with MGMN 200 indexable inserts 25 mm shank diameter for rigid clamping M16 thread for secure insert mounting Consistent cut quality through optimised insert compatibility The tool is engineered around the MGMN 200 insert format, providing a predictable cutting geometry that simplifies process planning. With 2 cutting edges and a 2 mm cutting-edge height, the design balances material removal and surface integrity. Using standardised Korloy inserts reduces qualification time for tooling and ensures fast replacement when an edge is spent, which keeps machine downtime to a minimum. The result is improved throughput and consistent slot profiles across batches. Rigid mounting and reduced vibration for longer life A 25 mm shank provides a solid clamp area for collets or shrink-fit holders, increasing rigidity and reducing chatter during slotting operations. The M16 thread secures the insert head for positive seating and repeatable positioning. With an overall length of 65 mm, the tool keeps overhang modest for many set-ups, helping to maintain dimensional accuracy. These mechanical choices translate into fewer rejected parts and less time spent on rework. Practical handling and serviceability in the workshop The cutter’s compact mass (0.138 kg) makes it easy to fit and handle during set-up while keeping spindle load low in typical milling machines. The required Allen key size is 6 mm, simplifying insert changes and ensuring safe torque application for clamping. Because the cutter uses indexable inserts, maintenance is limited to periodic insert replacement rather than regrinding, which reduces tooling inventory complexity and speeds up turnaround. For bespoke set-ups or compatibility checks, Metav’s technical team can advise on holders and machine parameters. Contact Metav Werkzeuge for tailored advice on integrating this Teknik Makina T-slot cutter into production and for assistance with insert sourcing and clamping recommendations Technical data Article number: TKC278TM Product: T-slot cutter for MGMN 200 indexable inserts Manufacturer: Teknik Makina Label: 40mm T-Nut Fräser MGMN 200 L65mm Facts Diameter: 40 mm Overall length: 65 mm Shank diameter: 25 mm Cutting edges: 2 Cutting edge height: 2 mm Weight: 0.138 kg Thread: M16 SKU: TKC278TM Special features Compatible with MGMN 200 indexable inserts Suitable for Korloy inserts Allen key size: 6 mm FAQ Which inserts fit this cutter? The cutter is designed for MGMN 200 indexable inserts and is compatible with Korloy insert types specified for that geometry. What shank diameter is required for secure clamping? A 25 mm shank provides the clamp diameter; use holders or collets rated for 25 mm to ensure rigidity for the cutter. What is the overall length and typical application? The tool has a 65 mm overall length and is intended for machining T-slots and T-nuts in workshop and small-series milling operations. How many cutting edges does the cutter have and what is the edge height? The cutter features 2 cutting edges with a 2 mm cutting-edge height, optimised for stable material removal and clean slot walls. What thread is used to secure the insert head? The cutter uses an M16 thread for secure and repeatable insert head mounting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
42mm T-Nut Cutter for SCMT 09T3 Indexable Inserts 35mm Cutting Length, 3 Flutes - Teknik Makina
Benefit from a robust combination of a 42 mm cutting diameter, a secure 16 mm shank and compatibility with SCMT 09T3 indexable inserts for efficient, repeatable T-slot machining; order via Metav Werkzeuge or consult our specialists for application-specific advice. T-slot cutter TKC196TM — 42 mm diameter, L200 mm (Teknik Makina) T-slot cutter TKC196TM is a precision milling tool designed to machine T-slots using SCMT 09T3 indexable inserts, ideal for fixture and slot production in workshop and industrial environments. 42 mm cutting diameter for wide T-slots Compatible with SCMT 09T3 indexable inserts 16 mm shank for secure clamping Three cutting edges for balanced machining Consistent accuracy with modular inserts The combination of a 42 mm cutting head and acceptance of SCMT 09T3 indexable inserts delivers a modular approach to slot machining. Using indexable inserts means cutting geometry can be renewed without replacing the whole tool, which reduces tooling costs and speeds up turnaround. The cutter’s design keeps cutting forces predictable, so the milling process remains stable and repeatable even during batch production, supporting consistent component fit and reduced rework. Stable performance that improves cycle time and surface quality Equipped with three cutting edges and a 55° cutting angle, the tool balances material removal and chip formation to lower vibration and improve surface finish. The 16 mm shank and 200 mm overall length provide a secure clamping interface and reach for most common T-slot depths, while the 35 mm effective cutting length gives a defined engagement zone that helps control tool deflection. These attributes contribute to faster cycle times and fewer secondary operations, enhancing overall efficiency on the shop floor. Quick servicing and reliable workshop integration Insert changes are straightforward thanks to the Torx fastener system (Torx T15; screw M3.5x8.5), enabling fast indexable-insert swaps and minimal downtime. With a compact mass of 0.442 kg and robust construction, the cutter integrates easily into standard toolholding systems and is suited for repetitive use in production and maintenance tasks. Clear labelling and the SKU TKC196TM simplify inventory control and procurement within established tooling programmes. For tailored machining advice or to secure the Teknik Makina T-slot cutter from stock at Metav Werkzeuge — dispatched from our Emmerich warehouse — contact Metav Werkzeuge for specification support or ordering by email info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data SKU: TKC196TM Product: T-slot cutter for SCMT 09T3 indexable inserts Label: 42mm T-Nut Fräser SCMT 09T3 L200mm Manufacturer: Teknik Makina Core data Diameter: 42 mm Overall length: 200 mm Shank diameter: 16 mm Cutting length (shank/slice): 35 mm Cutting edges: 3 Cutting angle: 55° Weight: 0.442 kg Torx key: T15 Torx screw: M3.5x8.5 Special features For SCMT 09T3 indexable inserts SKU TKC196TM Three cutting edges for balanced cutting 55° rake/approach geometry FAQ Which indexable inserts fit this cutter? The cutter accepts SCMT 09T3 indexable inserts; the modular insert system allows quick replacement to restore cutting geometry without changing the tool body. What shank size is required for secure clamping? A 16 mm shank is specified for the tool, providing a stable interface for conventional toolholders and minimizing runout during T-slot machining with the TKC196TM cutter. How many cutting edges does the tool have and what is the angle? The tool features three cutting edges set at a 55° cutting angle, which helps balance chip evacuation and surface finish during slot production. Is the cutter suitable for repetitive production work? Yes; the indexable insert concept, Torx fastener access and a robust shank design make the TKC196TM suitable for repetitive and batch production where quick servicing and repeatable results are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
42mm T-Nut Cutter for SCMT 09T3 Indexable Inserts 55° Cutting Angle, 100mm Length - Teknik Makina
Take advantage of the combination of 42 mm cutting diameter, compatibility with SCMT 09T3 indexable inserts and a robust Ø 20 mm shank for stable, repeatable T-slot production; order directly via Metav Werkzeuge or consult our specialists for integration support. T-slot cutter for SCMT 09T3 indexable inserts, 42 mm – Teknik Makina A T-slot cutter engineered for precise T-slot milling in workshop and production environments, compatible with SCMT 09T3 indexable inserts and designed for stable clamping. *42 mm cutting diameter *Compatible with SCMT 09T3 inserts *Ø 20 mm shank for secure clamping *Three cutting edges, 55° cutting angle Accurate T-slot forming for consistent production The cutter delivers repeatable results thanks to a 42 mm cutting diameter and an optimised geometry that reduces chatter during engagement. The combination of a defined radial dimension and a 55° cutting angle ensures consistent chip evacuation and a clean slot profile, which lowers rework rates and improves throughput. This configuration is particularly effective in small- to medium-batch production where dimensional consistency of T-slots is critical. Stable holding and tool life benefits from a solid shank A Ø 20 mm shank and a 100 mm overall length provide secure clamping in standard toolholders, improving rigidity during side-cutting operations and reducing the risk of run-out. The three cutting edges distribute cutting forces evenly, which extends abrasive and fracture resistance in the insert system and reduces downtime for tool changes. The tool’s modest mass (approx. 0.242 kg) assists acceleration on shorter cycles while maintaining industrial robustness. Simple insert system and fast on-tool maintenance Designed for indexable insert use, the cutter accepts SCMT 09T3 inserts fixed with a M3.5x8.5 torx screw and tightened using a T15 torx key, enabling quick replacement and minimal spindle idle time. The standardised insert interface supports widespread insert availability and cost-effective stocking. The assembly and service routine is straightforward, helping maintenance teams to restore cutting capacity rapidly without specialist equipment. For reliable T-slot milling backed by Teknik Cutting Tools quality, contact Metav Werkzeuge in Emmerich for tailored supply and practical advice: info@metav-werkzeuge.com • +49 2822 7131930. Technical data Article number: TKC193TM Label: 42mm T-Nut Fräser SCMT 09T3 L100mm Brand: Teknik Makina eClass: 21180605 Facts Cutting diameter: 42 mm Overall length: 100 mm Weight: 0.242 kg Shank diameter: 20 mm Cutting length: 30 mm Number of cutting edges: 3 Cutting angle: 55° Special features Compatible with SCMT 09T3 indexable inserts Screw type: M3.5x8.5 Torx key: T15 SKU: TKC193TM Product type: T-slot cutter FAQ What insert type does this cutter use? The cutter is designed for SCMT 09T3 indexable inserts, offering a standardised insert interface for straightforward sourcing and replacement. Is the shank suitable for rigid toolholders in production use? Yes, the Ø 20 mm shank and 100 mm overall length provide the rigidity required for stable T-slot milling in workshop and light industrial settings. How many cutting edges are fitted and what is the benefit? The tool has three cutting edges, which balance cutting forces, improve surface finish and extend the effective life of each insert. Which fastening hardware is required for the inserts? Inserts are secured with a M3.5x8.5 torx screw tightened with a T15 torx key, enabling quick and secure insert changes. What is the SKU for ordering or spare-part reference? The product is listed under TKC193TM for ordering and stock management. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
43mm Chamfer Cutter 45/90° 3 Flute, 25mm Shank 37mm Cutting Height, 100mm Overall - Teknik Makina
Take advantage of a precise chamfering solution with a 43 mm cutting diameter, a 25 mm shank for rigid mounting and compatibility with economical TCMT 16T3 indexable inserts — a combination that keeps tooling costs low while improving process repeatability; order directly via Metav Werkzeuge or consult their specialists for integration advice. Chamfer cutter S340TM — 43 mm diameter, TCMT 16T3 compatible (Teknik Makina) The Chamfer cutter S340TM is a compact, indexable-insert tool designed for producing clean 45° and 90° chamfers in machining setups where repeatability and quick insert changes are required. 43 mm cutting diameter Compatible with TCMT 16T3 inserts 45° and 90° chamfer angles 25 mm shank for secure clamping Consistent chamfers that reduce rework and setup time The S340TM delivers repeatable chamfer geometry thanks to a well-dimensioned cutting head and defined seating for indexable inserts. Using replaceable TCMT 16T3 inserts means the cutting edge can be renewed in seconds, lowering downtime compared with solid cutters. The tool’s 3 cutting edges and dedicated clamping ensure stable cutting conditions, reducing the likelihood of rework and the time spent on manual deburring. For shops aiming to standardise edge treatments, this cutter offers a predictable, measurable result for both 45° and 90° chamfers. Rigid build for industrial use and reliable toolholding Designed with a 25 mm shank and a 100 mm overall length, the tool provides a balance of reach and stiffness suited to many common holders and collet systems that accept 25 mm shanks. The moderate weight (0.634 kg) and compact design contribute to lower vibration during chamfering passes, which supports longer insert life and a cleaner surface finish. Fast and secure insert fastening is provided by the M3.5x8.5 Torx screw with a T15 key, giving straightforward maintenance and minimal accessory complexity for production environments. Economical operation through indexable inserts and controlled chip management By accepting standard TCMT 16T3 inserts, the cutter minimises tooling costs and simplifies inventory: only the small triangular inserts need replacing rather than entire cutters. The 37 mm cutting height and the cutter’s diameter are dimensioned to produce stable chip evacuation for typical chamfering depths, supporting efficient cycle times and consistent part quality. Compatibility with two common chamfer angles (45° and 90°) makes the cutter versatile across a range of finishing tasks without multiple dedicated tools. Contact Metav Werkzeuge to discuss integrating the Teknik Makina Chamfer cutter S340TM into the tooling portfolio or to request tailored advice from their technical consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S340TM Brand: Teknik Makina SKU: S340TM Facts Cutting diameter: 43 mm Shank diameter: 25 mm Cutting height: 37 mm Overall length: 100 mm Weight: 0.634 kg Cutting edges: 3 Chamfer angles: 45° / 90° Special features For indexable inserts TCMT 16T3 Torx screw M3.5x8.5 Torx key size T15 Designed for chamfering operations FAQ What insert type does the chamfer cutter require? The chamfer cutter S340TM is designed for TCMT 16T3 indexable inserts, offering quick replacement and economical running costs. Which chamfer angles can be produced with this cutter? The tool is configured to produce defined 45° and 90° chamfers, enabling consistent edge geometry without additional tool changes. What are the key dimensions for toolholding compatibility? The cutter has a 25 mm shank and 100 mm overall length, suitable for holders and collets that accept a 25 mm diameter shaft. How many cutting edges are available on the head? The cutter features 3 cutting edges, arranged to provide stable cutting and straightforward rotation of insert positions as required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
45mm T-Nut Cutter For MGMN 300 Indexable Inserts, M16 Thread - Teknik Makina
Take advantage of a robust combination of precise fitment and simple maintenance: the 45 mm diameter and compatibility with MGMN 300 indexable inserts ensure efficient T-slot production, while the M16 mounting and 25 mm shank deliver stable clamping. Order the cutter directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. T-slot cutter for MGMN 300 indexable inserts — 45 mm, L65 mm (Teknik Makina) The T-slot cutter for MGMN 300 indexable inserts is engineered for straightforward T-slot milling in CNC machining centres and milling machines, offering reliable insert change and consistent slot geometry. 45 mm diameter for wide T-slots Compatible with MGMN 300 indexable inserts M16 mounting thread for secure attachment 25 mm shank for stable clamping Durable design for consistent slot profiles The cutter has been developed to provide repeatable slot geometry with minimal setup time. The combination of a 45 mm cutting diameter and 2 cutting edges results in balanced cutting forces that reduce vibration during machining. Because the tool accepts MGMN 300 indexable inserts, individual cutting edges can be replaced quickly, which lowers consumable costs compared with solid tools. The 25 mm shank and M16 thread give a secure connection to standard holders, ensuring the cutter is held rigidly and that concentricity is maintained across the full L65 mm overall length. Practical compatibility and maintenance benefits Compatibility with Korloy inserts and a standard indexable-insert system simplifies stock management in the workshop. Insert changes are performed with common tools and do not require specialist fixtures; a 6 mm Allen key is specified for clamping and unclamping. This modular approach means that downtime is limited to insert replacement rather than full-tool reconditioning, promoting higher availability on production lines. The cutter’s modest mass (approximately 0.142 kg) contributes to reduced spindle load while maintaining the stiffness needed for accurate slot milling. Integration into production workflows Installation and tool handling are straightforward: the tool is mounted via its M16 thread and secured in either a dedicated holder or an appropriate adapter; the 25 mm shank dimension is compatible with common clamping systems. For workshops that prioritise predictable cycle times, the replaceable-insert concept allows maintenance to be scheduled without interrupting machine availability. Technical documentation and clear labelling support inventory control and traceability, making the tool a pragmatic choice for OEMs and subcontractors who require dependable T-slot milling components. Contact Metav Werkzeuge for tailored application advice and to secure the Teknik Makina T-slot cutter TKC284TM from our Emmerich stock Technical Data SKU: TKC284TM Description: 45mm T-slot cutter MGMN 300 L65mm Product type: T-slot cutter Manufacturer: Teknik Makina Core dimensions Diameter: 45 mm Overall length: 65 mm Shank diameter: 25 mm Cutting edges: 2 Cutting height: 3 mm Weight: 0.142 kg Thread: M16 Compatibility & features For MGMN 300 indexable inserts Compatible insert manufacturer: Korloy Allen key: 6 mm FAQ Which inserts fit this cutter? The cutter accepts MGMN 300 indexable inserts; Korloy inserts that conform to the MGMN 300 geometry are suitable. How is the tool mounted in the holder? Mounting is via the M16 threaded connection and the 25 mm shank is clamped in a standard holder or adapter for secure radial support. What tools are required for insert changes? Insert clamping and removal are carried out with a 6 mm Allen key supplied or commonly available in workshops. Can this cutter be used on standard CNC milling machines? Yes, the cutter is designed for integration in CNC machining centres and conventional milling machines using appropriate holders. How does the replaceable-insert concept benefit production? Replaceable inserts reduce downtime and consumable cost because individual cutting edges are changed instead of replacing the entire tool body. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm T-Nut Cutter 55° for DCMT 11T3 and 35° for VBMT Inserts, 3 Flutes - Teknik Makina
Benefit from a robust T‑slot milling solution that combines compatibility with DCMT 11T3 indexable inserts, a 50 mm cutter diameter and a 25 mm shaft for secure mounting and consistent results. Order the tool directly via Metav Werkzeuge or contact the specialists for integration advice. T-Nut Cutter S070TM — 55° / 35° insert angles, 50 mm diameter (Teknik Makina) The T-Nut Cutter S070TM is a precision milling head for producing T-slots and grooves in steel components, engineered for use with DCMT and VBMT indexable inserts and designed for stable, repeatable machining. Compatible with DCMT 11T3 indexable inserts 50 mm diameter for deep T-slots Shaft diameter 25 mm for secure mounting Three cutting edges for smooth material removal Stable mounting for repeatable machining results The S070TM is built to reduce vibration and runout through a balanced geometry and a shaft diameter 25 mm that secures the toolholder interface. A stable mounting improves surface finish and tool life, which leads to more predictable cycle times in serial production. The 50 mm diameter and the cutter’s mass distribution contribute to steadier cutting forces, while the three cutting edges ensure continuous material engagement for a uniform chip flow and reduced rework. Flexible insert choices lower tooling costs Compatibility with indexable inserts such as DCMT 11T3 (and similar VBMT types) means insert tips are replaced rather than the whole head, reducing consumable costs and downtime. The tool supports a 55° approach geometry for DCMT and 35° for VBMT, which allows adjustment of cutting angle to match specific slot profiles and material behaviours. For operations where tool change frequency and inventory efficiency matter, this design facilitates standardised insert stocking and straightforward tip indexing. Geometry and lengths optimised for steel machining Designed for high-class steel machining, the cutter offers a cutting length 40 mm and a total length 120 mm, enabling deep T-slot creation without compromising stability. The cutter’s geometry balances clearance and support to deliver clean slot walls and consistent dimensions, even in tougher steel grades. Clearances and chip evacuation characteristics are tuned to reduce heat buildup, which extends insert life and maintains dimensional accuracy across longer runs. Quick assembly and straightforward maintenance Maintenance is uncomplicated thanks to the standard fastening hardware and accessible insert clamp. The cutter uses an M3.5x9 Torx screw secured with a T15 Torx key, enabling rapid insert changes and consistent torque during reassembly. This practical maintenance approach keeps machine downtime to a minimum and helps maintain cutting performance. Weight and handling were considered in the design—at approximately 0.584 kg the tool is heavy enough for stability yet light enough for safe handling during setup. For reliable T-slot production with proven insert compatibility, request the Teknik Makina T‑Nut Cutter S070TM through Metav Werkzeuge; our technical team is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to assist with specifications and order placement. Technical data Article number: S070TM Manufacturer: Teknik Makina Product: T‑Nut Cutter — 55° for DCMT and 35° for VBMT indexable inserts Dimensions & core data Cutter diameter: 50 mm Shaft diameter: 25 mm Cutting length: 40 mm Total length: 120 mm Number of cutting edges: 3 Weight: 0.584 kg Features & compatibility Compatible inserts: DCMT 11T3 Cutting angles: 55° / 35° Torx screw: M3.5x9 Torx key: T15 Application note: suitable for high‑class steel machining FAQ What inserts are compatible with this T‑Slot cutter? The cutter accepts DCMT 11T3 indexable inserts and can also be used with equivalent VBMT styles; the S070TM design supports the specified insert seat and clamping arrangement. Which cutting angles are provided and what do they mean? The tool is designed for 55° geometry for DCMT inserts and 35° for VBMT inserts; these angles refer to the insert rake/approach and determine chip flow and slot profile suitability. How long are the cutting and overall lengths? This T‑nut cutter features a cutting length of 40 mm and a total length of 120 mm, permitting deeper slotting while maintaining rigidity. What fastening hardware is required for insert changes? Insert clamping uses an M3.5x9 Torx screw, tightened or released with a T15 Torx key, allowing rapid and repeatable insert replacement. Is the cutter suitable for steel machining? Yes — the S070TM is specified for high‑class steel machining, with geometry and chip evacuation suited to demanding steel applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm T-Nut Cutter 60.55° 4 Inserts 25mm Shank 120mm Overall Length - Teknik Makina
The combination of fast indexable insert changes and a stable 25 mm shank ensures consistent high throughput and reduced downtime; pair this reliability with the precise 60° profile and robust 50 mm cutting diameter for dependable T-slot production. Order the T-slot cutter directly via Metav Werkzeuge or ask the consultants if assistance is required. T-slot cutter TKC250TM — 50 mm diameter, 60° cutting angle by Teknik Makina T-slot cutter TKC250TM designed for efficient production of standard 60° T-slots with indexable inserts in industrial milling applications 50 mm diameter for wide T-slot cuts Compatible with DCMT 11T3 inserts 25 mm shank diameter for secure clamping 60° cutting angle for standard T-slots Precision and productivity for repetitive T-slot machining The TKC250TM delivers a measurable productivity advantage through its 50 mm diameter and 4 cutting edges, enabling a high material removal rate when used with suitable indexable inserts. The cutter accepts DCMT 11T3 inserts, which allow quick edge changes and consistent cutting geometry, reducing non-productive time. The specification of a 60° cutting angle corresponds to the common T-slot profile, so set-up is straightforward and repeatable. The combination of robust geometry and indexable tooling supports efficient series production on CNC milling centres. Secure clamping and straightforward maintenance A 25 mm shank provides stable clamping in standard toolholders and contributes to vibration damping during heavy cuts, while the M3.5x9 Torx screw and T15 key enable rapid insert replacement without special tools. The indexable-insert design means that regrinding is avoided; worn edges are replaced in seconds, maintaining process consistency. This construction supports planned maintenance strategies: shorter changeover times and predictable tooling costs compared with solid cutters. Tool dynamics and machine compatibility With an overall length of 120 mm and a 30 mm cutting length, the cutter balances reach with rigidity for accessible T-slot machining in many workpiece setups. The tool mass of 0.521 kg contributes to dynamic stability—helping to reduce chatter when used within appropriate spindle speeds and with the right insert grade. These dimensional and mass characteristics suit production machines with adequate torque and stable fixturing, ensuring the cutter performs as intended under continuous operation. Practical setup tips and application context The TKC250TM is optimised for producing standard-profile T-slots; insert choice and cutting parameters should be matched to the workpiece material and machine capability. The indexable insert approach supports flexible selection of grades for steel, aluminium or other materials (select grade per supplier guidance). For feed and speed settings, follow the insert manufacturer's recommendations and consider machining tests to fine-tune parameters for the specific setup. For complex applications, consult Metav Werkzeuge for advice on insert grades and holder compatibility. For practical integration or specification checks of the Teknik Cutting Tools T-slot cutter TKC250TM, contact Metav Werkzeuge by phone +49 2822 7131930 or email info@metav-werkzeuge.com for tailored technical advice and ordering support. Technical data SKU: TKC250TM Product name: T-slot cutter Manufacturer: Teknik Makina Compatible inserts: DCMT 11T3 Torx screw: M3.5x9; Torx key: T15 Core dimensions Diameter: 50 mm Shank diameter: 25 mm Cutting length: 30 mm Overall length: 120 mm Cutting edges: 4 Cutting angle: 60° Weight: 0.521 kg Special features Indexable insert tool Quick insert changes with Torx fastening 4 cutting edges for productive cuts Designed for standard 60° T-slot profiles FAQ Which inserts fit the cutter? The cutter is designed for DCMT 11T3 indexable inserts; use inserts suited to the material and application for the best performance with the TKC250TM. What is the shank size and how does it affect clamping? The 25 mm shank provides secure clamping in standard toolholders and improves rigidity compared with smaller shank diameters. How many cutting edges are provided and what is their benefit? The tool has 4 cutting edges, enabling higher feed rates and smoother cutting transitions for repetitive T-slot production. What is the cutting profile angle of the tool? The cutter produces a 60° T-slot profile, which matches common industrial T-slot standards. Which fastening parts are required for insert changes? Insert retention uses a M3.5x9 Torx screw tightened with a T15 key for straightforward insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm T-Nut Cutter For Korloy MGM 3C Inserts, 2 Teeth, 3mm Cutting Height, 25mm Shank - Teknik Makina
Benefit from precise T-slot machining thanks to a 50 mm cutting diameter and a 25 mm shank, combined with a robust 2 cutting edges geometry for efficient steel removal; order the TKC300TM directly via Metav Werkzeuge or ask our consultants for specification support. T-slot milling cutter TKC300TM – 50 mm diameter, 25 mm shank (Teknik Makina) The T-slot milling cutter TKC300TM is a round milling cutter engineered for accurate T-slot creation in steel using Korloy MGM 3C indexable inserts. 50 mm diameter for deep T-slots 25 mm shank for secure clamping Compatible with Korloy MGM 3C inserts Two cutting edges for efficient stock removal High-efficiency cutting with controlled geometry Designed to produce repeatable T-slot profiles, the TKC300TM uses a 50 mm diameter and balanced head geometry to maintain stable chip evacuation and consistent flank form. The 2 cutting edges reduce instantaneous cutting forces, which can prolong insert life and lower tool-change frequency. For process planners, this translates into dependable cycle times and predictable tool behaviour during medium- to long-run production. Secure clamping and consistent seating for serial work Clamping reliability is essential for dimensional control; the cutter head is fastened with an M8 Torx screw and set using a 6 mm hex key to guarantee repeatable insert seating. The 25 mm shank ensures adequate stiffness in the toolholder while keeping the assembly compact. At approximately 0.498 kg, the tool minimises imbalance, helping to preserve surface finish and achieve consistent tolerances across batches. Simplified logistics through standard insert compatibility Configured for Korloy MGM 3C indexable inserts, the design reduces inventory complexity by using widely available, standard insert types. The round cutter profile creates the typical undercut required for T-bolts and clamping hardware, enabling secure fixture assembly on machine tables and modular fixturing systems. Compatibility with common inserts also aids rapid replacement and reduces downtime in production environments. Practical application advice for machinists and planners The cutter suits CNC milling centres and vertical milling machines where accurate slot depth and flank geometry are required; it is optimised for steel machining, offering a balance between aggressive metal removal and control of cutting temperatures. Process engineers will appreciate the clear dimensional data and straightforward mounting procedure, which support efficient set-up and predictable machining outcomes. Technical data sheets are available to help integrate the tool into established cutting strategies. For expert guidance on insert selection and fast delivery from Emmerich, contact Metav Werkzeuge for the TKC300TM and precision tooling solutions Technical data SKU: TKC300TM Product name: T-slot cutter Manufacturer: Teknik Makina Core dimensions Diameter: 50 mm Shank diameter: 25 mm Overall length: 120 mm Cutting height: 3 mm Number of cutting edges: 2 Cutting–shank distance: 12.75 mm Weight: 0.498 kg Compatibility & features Compatible inserts: Korloy MGM 3C Torx screw: M8 Hex key: 6 mm Design: round milling cutter for T-slots Intended use: steel machining FAQ Which inserts fit the cutter best? The TKC300TM is designed for Korloy MGM 3C indexable inserts, which provide the correct geometry and clamping interface for reliable T-slot cutting. What machines are suitable for use with this tool? This T-slot cutter is suitable for CNC milling centres and vertical milling machines where axial and radial tool rigidity are ensured. How does the clamping system affect repeatability? The M8 Torx screw and 6 mm hex key clamping secure the insert; the resulting repeatable seating improves dimensional consistency across serial production when using the TKC300TM. What should be considered when machining steel? When using this cutter for steel machining, monitor cutting speeds and cooling to manage temperatures and wear; the tool geometry supports efficient chip evacuation for continuous operation. Is the tool heavy and does that affect balancing? Weighing about 0.498 kg, the tool is balanced to minimise centrifugal forces and support stable rotation at typical milling speeds for its intended applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm T-Nut Cutter for MGMN 300 Indexable Inserts L65mm, M16 Thread - Teknik Makina
Benefit from a robust 50 mm T‑slot cutter that accepts MGMN 300 indexable inserts and features an M16 thread for secure mounting; combine precise engagement and straightforward insert changes to keep production steady — order directly via Metav Werkzeuge or request advice from the technical team. T-slot cutter for MGMN 300 Indexable Inserts – 50 mm, M16 thread (Teknik Makina) The T-slot cutter is intended for accurate T‑slot machining with MGMN 300 indexable inserts, suited to industrial milling and workshop production. 50 mm cutter diameter for deep T-slots Compatible with MGMN 300 indexable inserts M16 thread for secure mounting 65 mm overall length for stable engagement Faster setup and consistent slot profiles for productive runs Designed to streamline T‑slot production, this cutter accepts MGMN 300 indexable inserts for quick insert changes and consistent cutting geometry. The 50 mm cutter diameter delivers the required engagement for standard T‑slot profiles, while the tool’s geometry and two cutting edges reduce the number of passes needed. As a result, cycle times are shortened and part-to-part accuracy is improved, which supports higher throughput in both small‑batch and repetitive manufacturing. Secure mounting and vibration control for surface quality A substantial 25 mm shank and an M16 thread connection provide secure clamping and concentricity in milling holders, promoting stability during axial cutting. The tool’s two cutting edges and a 3 mm cutting-edge height contribute to smooth chip evacuation and balanced cutting forces, reducing chatter and improving surface finish. The 65 mm overall length maintains a compromise between accessibility and rigidity, allowing reliable machining without excessive overhang. Practical benefits for workshop inventory and compatibility The cutter’s compatibility with Korloy indexable inserts simplifies tool logistics and reduces the range of spare parts required for shop floors that already use that insert system. Lightweight handling (approx. 0.152 kg) and standardised replacement inserts make insert swaps fast, minimising downtime during production changeovers. For operators seeking reliable, repeatable T‑slot machining with proven insert availability, this tool is a pragmatic addition to the tooling cabinet. For procurement or specification advice on the Teknik Makina T‑slot cutter, contact Metav Werkzeuge for tailored support and fast supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930; Metav’s consultants will assist with selection and compatibility checks Technical data Article number: TKC286TM Manufacturer: Teknik Makina Product type: T-slot cutter Facts Diameter: 50 mm Overall length: 65 mm Shank diameter: 25 mm Thread: M16 Cutting edges: 2 Cutting edge height: 3 mm Weight: 0.152 kg Special features For MGMN 300 indexable inserts Compatible with Korloy inserts Requires 6 mm Allen key for clamping Label: 50mm T-Nut Fräser MGMN 300 L65mm eClass: 21180605 FAQ What insert type fits this cutter? The cutter accepts MGMN 300 indexable inserts; Korloy‑brand inserts are compatible and commonly stocked for this tool. How is the cutter secured in the holder? Secure mounting is achieved via an M16 thread and a 25 mm shank, ensuring concentric clamping and reduced runout for the T‑slot cutter. Is the tool suitable for production and prototype work? Yes, the design of the cutter and the use of standard MGMN 300 inserts make it suitable for both short production runs and prototyping where quick insert changes are advantageous. Which SKU identifies this tool for ordering? This item is listed under SKU TKC286TM, supplied by Teknik Makina and available through Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm T-Nut Cutter for MGMN 300 Indexable Inserts, 3 Flutes, 55mm Overall Length - Teknik Makina
Take advantage of the robust 50 mm cutting diameter combined with compatibility for MGMN 300 indexable inserts to ensure efficient, repeatable T‑slot milling; request stock information or advice via Metav Werkzeuge for fast supply from Emmerich. T-slot cutter by Teknik Makina — 50 mm diameter, for MGMN 300 inserts T-slot cutter for machining T‑slots and grooves using indexable inserts, designed for stable mounting and consistent surface finish on production runs 50 mm cutter diameter for wide T‑slots Compatible with MGMN 300 indexable inserts 3 flutes for balanced cutting action Shank Ø 20 mm for secure clamping Consistent slot quality with fewer passes The large 50 mm diameter and 3 flutes deliver a stable cutting profile that reduces vibration and improves surface finish on each pass. Using MGMN 300 indexable inserts means the tool body remains intact while wear is handled by replacing economical inserts, leading to lower per‑slot costs and shorter downtime. For shops aiming to maintain throughput, the combination of cutter geometry and indexable inserts translates into predictable cycle times and repeatable results. Secure mounting and access for varied setups A Shank Ø 20 mm together with Thread 12 ensures reliable clamping in standard toolholders, while the 55 mm overall length gives sufficient reach for many common T‑slot depths without compromising rigidity. The compact weight of 0.118 kg assists in reducing spindle load and inertia during rapid tool changes. Developed by Teknik Makina for compatibility with Korloy inserts, this tool supports quick insert indexation and consistent seating, which is particularly valuable in batch production where tool change efficiency matters. Production reliability backed by a trusted supplier Selecting this cutter supports lean procurement: the indexable system minimises inventory of complete cutters and keeps replacement costs low. Metav Werkzeuge acts as a quality filter for the European market, offering stable availability and technical guidance from a central location in Emmerich. With a broad product range and long experience in precision tooling, Metav underpins the cutter’s performance with pragmatic supply and sector expertise, reinforcing reliable operation on the shop floor. For technical clarification or to confirm availability of the Teknik Makina T‑slot cutter with MGMN 300 compatibility (SKU TKC320TM), contact Metav Werkzeuge for tailored advice and supply from Emmerich. Technical data SKU: TKC320TM Product type: T‑slot cutter Label: 50mm T‑Nut Fräser MGMN 300 L55mm Manufacturer: Teknik Makina Facts Diameter: 50 mm Overall length: 55 mm Shank diameter: 20 mm Thread: 12 Weight: 0.118 kg Cutting edges: 3 Cutting edge height: 3 mm eClass: 21180605 Special features Compatible with MGMN 300 indexable inserts Insert manufacturer: Korloy Manufacturer: Teknik Makina SKU: TKC320TM FAQ What inserts fit this cutter? The cutter accepts MGMN 300 indexable inserts; Korloy inserts are specified as compatible for the system. Is the tool suitable for production‑grade T‑slot machining? Yes. The 50 mm diameter and 3 flutes provide stability and surface quality suitable for repetitive production tasks. How is the cutter mounted? Mounting uses the Shank Ø 20 mm and Thread 12 configuration to ensure secure clamping in appropriate toolholders. Can the cutter reach deep T‑slots? The 55 mm overall length offers adequate reach for many standard T‑slot depths while maintaining rigidity for controlled cutting. What is the product SKU for ordering or reference? Reference SKU TKC320TM when enquiring about the Teknik Makina T‑slot cutter and compatible inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm T-Nut Cutter L120mm 2 Flute, 25mm Shank - Teknik Makina
Take advantage of a robust combination of precision and workshop-ready compatibility: the cutter's 50 mm cutting diameter and 25 mm shank deliver stable, repeatable T-slot profiles while compatibility with Korloy inserts keeps downtime and tooling costs low — order or discuss technical fitment with Metav Werkzeuge for seamless supply and advice. Teknik Makina 50 mm T-slot cutter, 25 mm shank, L120 mm The Teknik Makina 50 mm T-slot cutter for precise profile machining in production and jobbing shops, designed for stable clamping and economical indexable-insert replacement. 50 mm cutting diameter 25 mm shank for secure clamping Compatible with Korloy indexable inserts Consistent slot geometry for efficient production A cutter with a 50 mm cutting diameter and two flutes provides a balanced machining action that reduces vibration and produces a uniform T-profile in a single pass. The cutting height 2 mm helps to define the slot depth precisely, which minimises secondary operations and rework. For manufacturing environments where cycle time and repeatability matter, this tool translates cutter geometry into measurable productivity gains and a predictable surface finish. Fast setup and economical maintenance The 25 mm shank offers secure engagement in standard tool holders, increasing process stability when milling T-slots. Assembly and adjustment are straightforward thanks to the supplied Allen key 6 mm, which simplifies clamp tightening during tool changes. The cutter accepts Korloy inserts, allowing worn edges to be renewed quickly without discarding the entire tool body; this insert system reduces per-cut costs and enables rapid restoration of cutting performance at the bench. Supply reliability and workshop advantages Produced by Teknik Makina, the tool is specified under SKU TKC299TM and designed for routine workshop integration where tooling reliability is required. The use of indexable inserts, a robust shank diameter and a clear profile geometry means less machine downtime and consistent results across batches. Combined with Metav Werkzeuge's distribution and quality-filtering from Emmerich, the tool fits into a predictable supply chain that supports both small workshops and larger production lines. Choose Teknik Makina's T-slot cutter TKC299TM for dependable T-slot machining and contact Metav Werkzeuge for application advice and secure delivery from Emmerich. Technical data Article number: TKC299TM Label: 50mm T-Nut Fräser L120mm Manufacturer: Teknik Makina Product type: T-slot cutter eClass: 21180605 Core dimensions Diameter: 50 mm Overall length: 120 mm Shank diameter: 25 mm Number of flutes: 2 Cutting height: 2 mm Special features Compatible with Korloy inserts Allen key 6 mm SKU: TKC299TM Manufacturer: Teknik Cutting Tools FAQ What are the key dimensions of the cutter? The cutter offers a 50 mm cutting diameter, 25 mm shank and an overall length of 120 mm; it features two flutes and a cutting height of 2 mm for defined slot profiles. Which insert system does the cutter use? This T-slot cutter accepts Korloy indexable inserts, allowing economical edge changes and quick restoration of cutting performance without replacing the entire tool body. Is the cutter suitable for high-volume workshop use? Yes. The combination of a robust shank, balanced two-flute design and insert-based maintenance makes the cutter suitable for repeated production runs where consistency and low downtime are priorities. How is the tool secured and adjusted in the holder? The 25 mm shank permits secure clamping in standard holders and the supplied Allen key 6 mm simplifies tightening during setup and insert changes. What is the SKU for ordering and reference? Reference SKU TKC299TM when enquiring or ordering to ensure the correct T-slot cutter specification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm T-Nut Cutter L65mm, 4 Flutes, M16 Thread - Teknik Makina
Take advantage of a robust combination of precision and secure mounting for consistent T‑slot production; the 50 mm cutting diameter and 25 mm shank ensure repeatable slot profiles and stable machining. Order directly via Metav Werkzeuge or request tailored advice from our consultants for application setup and insert selection. T-slot cutter TKC270TM by Teknik Makina — 50 mm diameter, 25 mm shank The T-slot cutter TKC270TM is a purpose-made milling tool for producing precise T‑slots in industrial machining applications, designed for secure mounting and straightforward insert replacement. 50 mm cutting diameter for deep T-slots 25 mm shank for stable clamping Compatible with Korloy indexable inserts M16 thread for secure cutter head mounting Consistent slot geometry for repeatable production The cutter’s geometry with 4 cutting edges and a 3 mm cutting edge height delivers a defined flank and base profile, reducing the need for rework and ensuring consistent component fit. Using indexable inserts in a balanced multi‑edge arrangement spreads cutting forces evenly, which helps to maintain concentricity and prolongs service intervals. The design supports precision workflows where consistency between parts is essential, and the replaceable insert concept keeps downtime for tool changes to a minimum. Stable clamping and machine friendliness A 25 mm shank combined with an M16 threaded cutter head provides a secure connection to compatible toolholders, reducing run‑out and vibration at the cutter‑to‑spindle interface. The tool’s overall length of 65 mm and a modest mass of 0.172 kg aid in maintaining rigidity without excessive overhang. Improved stability translates into better surface finish and tighter dimensional control during slotting operations, supporting higher first‑pass yields and fewer secondary operations. Fast servicing and productivity advantages Compatibility with Korloy indexable inserts makes insert procurement and replacement straightforward, lowering logistics complexity on the shop floor. The modular nature of the cutter head allows quick interchange of worn inserts, so production resumes rapidly with minimal setup effort. The SKU TKC270TM is engineered for straightforward integration into milling cells and manual milling setups where reliable throughput and uncomplicated maintenance routines are priorities. For reliable T‑slot machining choose the Teknik Makina TKC270TM via Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for technical guidance and order support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: TKC270TM Label: 50mm T-Nut Fräser L65mm Manufacturer: Teknik Makina ECLASS: 21180605 Diameter: 50 mm Overall length: 65 mm Shank diameter: 25 mm Number of cutting edges: 4 Cutting edge height: 3 mm Weight: 0.172 kg Thread: M16 Product type: T-slot cutter Compatible insert manufacturer: Korloy Cutter head mounting: Threaded M16 FAQ What types of inserts fit this cutter? The TKC270TM accepts Korloy indexable inserts specified for T‑slot geometry; insert choice determines cutting parameters and surface finish. How is the cutter mounted in the toolholder? Mounting is via the M16 threaded cutter head connection; secure clamping with a suitable holder and correct torque is recommended for best performance. Can the cutter be used in high‑volume production? Yes, the TKC270TM is engineered for repeatability and fast insert changes, supporting efficient production cycles when combined with appropriate machining parameters. What measurements define the cutter’s compatibility with existing equipment? Key dimensions are 50 mm diameter and 25 mm shank; overall length 65 mm and a lightweight design (0.172 kg) facilitate integration into many milling set‑ups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm T-Nut Cutter SPMG 06 Compatible, 7 Cutting Edges, 45mm Cutting Length - Teknik Makina
Take advantage of the combination of precise T-slot geometry, robust 32 mm shank support and rapid indexable-insert replacement for uninterrupted production. Order the T‑slot cutter directly via Metav Werkzeuge or request advice from the technical consultants for tailored application guidance. T‑nut cutter TKC050TM — 50 mm diameter, 7‑flute T‑slot milling cutter by Teknik Makina The T‑nut cutter TKC050TM is a purpose‑built tool for accurate T‑slot and T‑nut machining in general workshop and industrial milling applications, designed to deliver repeatable slot geometry with quick insert changes. 50 mm diameter for wide T‑slots 7 flutes for stable chip control 32 mm shank for rigid clamping 45 mm cutting length for deep slotting Consistent slot geometry for reliable assembly This T‑slot mill is engineered to produce precise T‑slot profiles with a stable cutting edge arrangement. The combination of a 50 mm diameter and 7 flutes reduces vibration and promotes uniform chip evacuation, which in turn helps maintain profile accuracy over serial runs. For customers seeking repeatable fitting results in fixtures and workholding, the tool’s balanced flute count offers an effective compromise between surface finish and removal rate. The cutting head is secured with a Torx fastener system to simplify insert replacement, while the robust 32 mm shank supports high clamping rigidity and reduces the risk of runout during heavy passes. Optimised for productivity and straightforward insert servicing Designed with workshop efficiency in mind, the tool supports rapid insert changes and minimal downtime. The cutter is supplied with a Torx screw (M2x4.2) and requires a T6 Torx key, ensuring secure and fast replacement of indexable inserts from compatible manufacturers. With a 45 mm cutting length and a 5 mm cutting height, the tool is suitable for moderately deep T‑slot operations without compromising stability. The overall length of 120 mm and a relatively low mass (0.83 kg) make the cutter easy to handle during tool changes and storage, while still providing the necessary reach for most vertical and horizontal milling setups. Material compatibility and application profile The cutter’s geometry and construction make it suitable for a broad range of general metalworking tasks where T‑slot milling is required. Its flute geometry aids chip control across typical ferrous and non‑ferrous workpieces commonly encountered in fixture manufacture and machine bed modification. Compatibility with established insert manufacturers, including Taegutec, simplifies procurement and gives access to a range of grades for different materials and cutting conditions. The result is a tool that supports both one‑off and small‑batch production environments with a focus on consistent fit and reduced rework. Installation, handling and expected benefits Fitted into a suitable toolholder with the 32 mm shank, the cutter performs best when clamped with minimal overhang and correct axial support. The indexed insert system means that minor edge wear can be addressed by simple indexing or replacing the insert, avoiding full‑tool replacement and lowering operating costs. Users will appreciate the balance between cutting capacity and user‑friendly maintenance: faster changeovers and fewer interruptions translate into improved shop throughput and predictable part quality. Documentation and technical drawings are recommended for integration into process planning and NC programming. For technical consultation on integrating the 50 mm T‑slot cutter into production, contact Metav Werkzeuge for expert advice and dependable delivery from Emmerich. Technical data Article number: TKC050TM Manufacturer: Teknik Makina ECLASS: 21180605 ETIM: EC011860 Core data Diameter: 50 mm Flutes: 7 Overall length: 120 mm Shank diameter: 32 mm Cutting length (shank): 45 mm Cutting diameter at shank: 31.5 mm Cutting height: 5 mm Weight: 0.83 kg Special features T‑slot cutter for machining T‑nuts and T‑slots Compatible with Taegutec indexable inserts Torx screw M2x4.2 for insert clamping Torx key required: T6 SKU: TKC050TM FAQ Which insert brands fit this T‑slot cutter? The TKC050TM is specified for use with compatible indexable inserts; it is listed as compatible with Taegutec inserts and will accept inserts from manufacturers following the same seat geometry. What shank size and holder are required? The cutter has a 32 mm shank; a rigid toolholder sized for a 32 mm shank and minimal overhang is recommended to ensure optimal runout and finish. How deep can the cutter machine a T‑slot in one pass? The tool provides a 45 mm cutting length and a 5 mm cutting height; maximum single‑pass depth should be selected based on material, insert grade and machine rigidity to avoid overload. How is the insert secured and replaced? Inserts are secured with a Torx screw (M2x4.2) and require a T6 Torx key for removal and fitting, enabling quick and secure insert changes. Is the TKC050TM suitable for serial production? Yes, the cutter’s multi‑flute design and robust shank support are intended to deliver consistent results in serial and small‑batch production, reducing rework and downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Reduce downtime with reliable internal-coolant t-slot cutters
A t-slot cutter is engineered to produce the wider, undercut section of a T-shaped slot commonly used in machine tables, workholding plates and industrial fixtures, while its shank runs through a previously made, narrower guide groove. Where external machine nozzles spray coolant from outside, machining of enclosed T-slots can leave the cutting edges starved of lubricant and the chips trapped; this increases heat, tool wear and the risk of sudden breakage. T-slot cutters with internal coolant avoid these issues by routing cooling fluid through deep shaft channels directly to the cutting edges.
How the tool works and where it is indispensable
The cutter is designed so that the enclosed cutting zone receives coolant under pressure via internal bores, which flush chips out of the narrow, enclosed cavity and remove process heat at the hidden engagement point. This technical design is especially necessary for t-slot milling operations in heavy-duty clamping plates, machine tables and fixtures where the tool is largely surrounded by material and external coolant cannot reach the cutting edges reliably.
Key operational benefits you can expect
- improved tool life through targeted cooling at the cutting edge
- consistent chip evacuation thanks to high-pressure internal coolant flow
- reduced risk of tool breakage by avoiding chip jamming and thermal overload
- better dimensional accuracy because heat and swarf are controlled at the source
- fewer rejects and less rework, increasing throughput in production
Metav as your practical partner for procurement and advice
Metav acts as a precision partner that makes high-accuracy tooling accessible for workshops and industry. From our Emmerich base we combine decades of expertise with a broad range of solutions, supported by over 48,000 customers and more than 250,000 products. For buyers seeking reliable supply and pragmatic technical guidance, Metav provides straightforward advice on selecting the right t-slot cutter or t-nut cutter and can clarify compatibility with existing setups.
FAQ
What is the main advantage of a t-slot cutter with internal coolant compared with external cooling?
A t-slot cutter with internal coolant delivers the coolant directly to the cutting edges through internal bores and channels, which is essential because the cutter works deeply and is largely enclosed by material; this prevents the coolant starvation and chip entrapment that commonly occur when external machine nozzles are used.
In which situations is a t-slot cutter absolutely required?
t-slot cutters are required for milling the undercut portion of T-shaped slots in machine tables, workholding plates and industrial fixtures where reliable chip evacuation and heat removal at the hidden engagement point are critical to prevent tool failure.
How does internal coolant affect chip removal and tool safety?
Internal coolant provides a strong flushing action that carries chips out of the narrow cavity, preventing chip jamming, avoiding overcutting on residual swarf and significantly reducing the likelihood of sudden tool breakage due to overload.
Can Metav advise on choosing the right t-slot milling cutter for a specific clamping system?
Yes. Metav’s technical team can advise on selecting the appropriate t-slot cutter or t-nut cutter for your machine table or fixture configuration and explain how internal coolant channels and shank guidance will interact with your existing guide groove.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com