Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
180° 11,000 N Vertical Clamp With Vertical Foot, Blackened Finish - Kukamet
Combine a 11,000 N clamping capacity with a compact 1.6 kg body and vertical-foot mounting for consistently secure workholding. Order the vertical clamp directly via Metav Werkzeuge or consult our specialists for application advice. Kukamet Vertical clamp 232-6 — 11,000 N clamping force, vertical-foot mount The Vertical clamp 232-6 is a compact vertical-foot workholding device for secure clamping in fixtures, jigs and repeatable machining setups. 11,000 N clamping force Black oxide finish Vertical-foot mounting 180° lever angle Consistent heavy-duty clamping for machining reliability A high clamping capacity of 11,000 N delivers firm, vibration-resistant hold that reduces part movement during cutting and finishing operations. The mechanism converts lever action into stable downward force, ensuring repeatable results and minimised rework. For production environments where cycle-to-cycle accuracy matters, this performance characteristic supports tighter tolerances and improved throughput without complex setup changes. Space-saving design that integrates into jigs and fixtures The compact construction and vertical-foot mounting enable simple integration into existing tooling plates and custom fixtures. At 1.6 kg, the unit is lightweight enough for retrofitting yet robust in function, permitting fast installation and reliable positioning. The 180° lever angle offers a full open-to-closed stroke suitable for constrained spaces, allowing effective handling where horizontal clamps cannot be used. Corrosion-resistant finish and dependable supply chain A black oxide finish provides abrasion resistance and a uniform appearance while helping to limit surface corrosion in workshop environments. Sourced from Kukamet and distributed through Metav Werkzeuge, the clamp benefits from consistent quality control and European warehousing that supports reliable restocking. This combination reduces the risk of supply interruptions and simplifies procurement for production and maintenance planning. Contact Metav Werkzeuge for application guidance and stock availability of the Kukamet Vertical clamp 232-6 — our team in Emmerich provides expert advice and dependable delivery. Technical data SKU: 232-6 GTIN: 8680731504385 Weight: 1.6 kg Facts Max clamping force: 11,000 N Angle: 180° eClass: 21041717 ETIM: EC011973 Special features Material: black oxide finish Mounting type: vertical foot Category: clamps (spanner) Brand: Kukamet FAQ What is the maximum clamping force of this clamp? The Kukamet vertical clamp 232-6 provides a maximum clamping force of 11,000 N for heavy-duty workholding. How is the clamp mounted to a fixture? Mounting is via a vertical foot; the design is intended for direct attachment to plates and jigs using the base foot. Is the surface corrosion-resistant? Yes, the clamp has a black oxide finish that improves abrasion resistance and offers basic protection against surface corrosion. Can this clamp be used in tight spaces? The 180° lever angle and compact body make the unit suitable for installations with limited horizontal clearance. What is the weight and how does that affect installation? The unit weighs 1.6 kg, enabling straightforward handling and retrofit into existing fixtures without heavy lifting equipment. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180° Vertical Clamp 1.5 kN Closing Force, 5 kN Holding Force, Blackened Steel - Kukamet
Efficient, reliable workholding through a combination of 1,500 N clamping thrust and 5,000 N holding capacity, delivered in a compact vertical-foot design that simplifies fixture mounting; order the Kukamet vertical clamp directly via Metav Werkzeuge or consult our advisors for integration support. Vertikalspanner 224 — Vertical lever clamp with 1,500 N clamping force (Kukamet) The Vertikalspanner 224 is a vertical lever clamp engineered for secure fixturing and quick-action locking in production jigs and fixture plates Holding force up to 5,000 N Clamping force 1,500 N Vertical foot mounting for secure fixing 180° swivel lever, blackened finish Predictable clamping performance for consistent results The device provides clearly defined load values: 5,000 N holding force and 1,500 N clamping force, which allow planners to calculate retention and active engagement separately. The holding figure indicates the static retention capacity when the clamp is locked, while the clamping thrust is the force applied during actuation. This separation supports more accurate fixture design and reduces the risk of workpiece movement during machining, helping to maintain repeatable tolerances across batch runs. Compact mounting that saves space on the fixture plate A vertical foot mounting keeps the unit close to the base, enabling direct attachment to plates and blocks without bulky adapters. At 1.12 kg, the clamp balances low mass and serviceable robustness, making it suitable where compactness and predictable mass distribution matter. The blackened finish provides a uniform surface treatment that helps reduce glare in inspection areas, while the 180° lever travel offers flexible positioning to suit confined layouts and ergonomic loading. Fast, simple operation to accelerate set-up times The clamp follows a lever-actuated mechanism that converts manual input into a repeatable locking action; this lever clamp principle supports quick part changes and consistent engagement force. The quick-action characteristic of the mechanism shortens changeover intervals and simplifies operator workflows in assembly or short-run machining operations. Routine upkeep is straightforward: periodic light lubrication and visual checks at pivot points sustain reliable function and long service life. Designed for fixture integration and traceable procurement Produced by Kukamet, the unit listed under SKU 224-4 is intended for industrial and workshop fixtures where repeatability and a compact footprint are priorities. Traceability is assisted by GTIN 8680731504651, which supports stock control and procurement processes. As a medium-duty workholding element, the clamp complements modular fixturing systems and can be specified where reliable, repeatable clamping is required. Contact Metav Werkzeuge to discuss specification matching and procurement of the Kukamet vertical clamp 224-4 from our Emmerich stock for rapid integration into production fixtures Technical data SKU: 224-4 GTIN: 8680731504651 eClass: 21041717 ETIM: EC011973 Key figures Max clamping force: 1,500 N Max holding force: 5,000 N Angle: 180° Weight: 1.12 kg Features Vertical foot mounting Blackened finish Lever clamp design Category: Clamp FAQ What is the difference between the clamping and holding figures? The clamping figure refers to the active thrust during engagement (1,500 N), while the holding figure indicates static retention after locking (5,000 N) for the Kukamet Vertikalspanner 224-4. Can the clamp be mounted directly to a fixture plate? Yes — the vertical foot mounting is intended for direct attachment to plates or fixture blocks, allowing straightforward integration of the Kukamet vertical clamp 224-4. How much lever travel is available for positioning? The lever provides 180° travel, offering flexible positioning to accommodate part loading and access in confined arrangements. Is maintenance complicated for this clamp? Maintenance is minimal; the Vertikalspanner 224 benefits from light lubrication of pivot points and routine inspection to maintain reliable, repeatable operation. Which applications are typical for this clamp model? The clamp is suited to production jigs, assembly fixtures and medium-duty machining fixturing where compact, repeatable clamping is required; refer to SKU 224-4 for procurement and stock details. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180° Vertical Clamp 11,000 N Clamping Force, Blackened Finish 1.82kg - Kukamet
Take advantage of the combination of a vertical foot for stable mounting, 11,000 N maximum clamping force and a compact 1.82 kg body to streamline fixture setup and improve repeatability on the shop floor. Order the Kukamet 222 vertical clamp directly via Metav Werkzeuge or consult our specialists for application advice. Kukamet 222 Vertical clamp – Vertical mounting, 11 kN clamping force A Kukamet 222 vertical clamp for secure, repeatable workpiece fastening in workshop and light industrial fixturing. Vertical foot for stable mounting 11 kN maximum clamping force 180° lever travel for flexible positioning Blackened (brunished) corrosion-resistant finish Consistent high clamping force for reliable production The vertical clamp delivers a measured 11,000 N clamping capacity that supports repetitive clamping tasks with consistent pressure. Built as a lever clamp, the mechanism converts simple manual action into reliable holding force, reducing the need for frequent readjustment. The compact mass of 1.82 kg combines rigidity with easy handling during fixture assembly. For production environments where cycle stability matters, the design reduces set-up variance and helps maintain dimensional control of parts without adding unnecessary bulk to the jig or fixture. Space-efficient mounting with flexible positioning Designed for a vertical foot fitment, the unit installs directly to machine tables or fixture plates to save horizontal space and keep adjacent tooling accessible. The 180° lever travel allows the clamping arm to be positioned clear of the workpiece when loading and returned into place for secure holding, which shortens handling time between operations. The combination of vertical mounting and full lever travel is particularly effective in clustered fixture assemblies where access and clearance are limited, enabling compact layouts without compromising ergonomics or safety. Durable surface and straightforward integration The external surface has a blackened (brunished) finish that provides basic corrosion resistance and a professional, low-reflective appearance ideal for workshop conditions. The material and finish support regular use and simplify maintenance routines. As a lever-operated clamping device, it integrates with standard fixture components and can be paired with locating pins or supports for repeatable part datum control. The construction suits general-purpose clamping in metalworking and fabrication jigs where mechanical simplicity and repeatable performance are priorities. For secure, high-force fixturing choose the Kukamet 222 and contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 to discuss delivery and application fitment Technical data Article number: 222-6 GTIN: 8680731504392 ECLASS: 21041717 ETIM: EC011973 Facts Max clamping force: 11,000 N Weight: 1.82 kg Lever angle: 180° Special features Mounting: vertical foot Finish: blackened (brunished) Type: vertical lever clamp Brand: Kukamet Intended use: clamping/fixture applications FAQ What maximum force does the clamp provide? The Kukamet 222 vertical clamp delivers up to 11,000 N of clamping force for secure workpiece retention in fixture and jig applications. How is the clamp mounted to a fixture plate? Mounting is by a vertical foot arrangement; the vertical foot secures the clamp to tables or plates for space-saving installation. Is the surface protected against corrosion? The unit is supplied with a blackened (brunished) finish, which offers basic corrosion resistance suited to workshop environments. Can the lever be positioned out of the way for loading? Yes, the lever travel is 180°, allowing the arm to clear the workpiece during loading and return to the clamping position for secure holding. Is the clamp suitable for heavy industrial fixtures? The design is intended for robust, repeatable clamping tasks; the 11 kN rating makes it suitable for many light to medium industrial fixturing needs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180° Vertical Clamp 2,500 N Closing Force, Vertical Base, Blackened Finish - Kukamet
Take advantage of a compact, high‑force clamping solution that combines 2,500 N holding power with a lightweight design and a vertical foot for secure fixture mounting. Order the clamp directly via Metav Werkzeuge or contact their consultants for application advice. Vertikalspanner 222 – Vertical clamp with 2,500 N clamping force (Kukamet) A Vertikalspanner 222 is a compact vertical toggle clamp for fixed fixturing and assembly tasks, optimised for repetitive positioning and stable holding in workshop environments 2,500 N clamping force for secure hold Vertical foot mounting for stable attachment Blackened finish for corrosion resistance 180° lever angle for versatile handling Reliable hold for repetitive production The 2,500 N rated clamping action delivers precise and repeatable force, making this vertical toggle clamp ideal where consistent fixture pressure is required. The mechanism converts lever travel into a controlled vertical clamp stroke, ensuring repeatable positioning and reduced cycle variation. Designed for use in production jigs and assembly stations, the device reduces setup time and supports uninterrupted workflow by maintaining component placement under load. Compact build with robust surface protection Manufactured with a blackened finish, the clamp resists surface wear and offers improved corrosion protection in everyday workshop conditions. The compact construction and 0.24 kg mass enable easy integration into existing fixtures without significant added weight. A vertical foot mounting provides a secure attachment point on flat surfaces or fixture plates, while the 180° lever articulation allows installation in confined spaces and flexible access during clamping operations. Practical advantages in handling and installation The lever‑actuated design is straightforward to install and operate, supporting quick locking and unlocking during assembly cycles. The simple mechanical concept reduces maintenance intervals and simplifies replacement of worn components. By choosing a mechanically reliable clamp, shops benefit from lower downtime and predictable process behaviour—an advantage for batch work and serial assembly where throughput and consistency matter. Suitable applications and integration notes Engineered for clamping tasks in small to medium production setups, the unit suits fixture plates, jigs and assembly benches where vertical holding is required. The low mass and compact footprint allow implementation in multi‑station fixtures without compromising accessibility. Compatibility with standard fixturing practices means the clamp can be integrated alongside other holding elements for combined functionality and improved process stability. For tailored advice on integrating the Kukamet Vertikalspanner 222 into a production setup, contact Metav Werkzeuge in Emmerich for expert consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 222-2 GTIN: 8680731505917 Material: blackened finish Mounting: vertical foot Max. clamping force: 2,500 N Weight: 0.24 kg Angle: 180 eClass: 21041717 ETIM: EC011973 Facts Clamping force: 2,500 N Weight: 0.24 kg Angle: 180° GTIN: 8680731505917 SKU: 222-2 Special features Blackened (brüniert) finish Vertical foot mounting Lever‑type vertical clamp No additional special features listed Brand: Kukamet FAQ What is the maximum clamping force of the Vertikalspanner 222? The maximum clamping force is 2,500 N; the Kukamet Vertikalspanner 222 is specified for consistent vertical holding at that force. How is the clamp mounted? Mounting is via a vertical foot; the clamp is secured to flat fixture plates or benches using the foot as the primary attachment point. Is the surface treated for corrosion resistance? Yes—the unit has a blackened (brüniert) finish that offers improved surface protection under normal workshop conditions. Can the clamp be used in tight installation spaces? The compact form factor and 180° lever articulation make it suitable for installations with limited space where vertical clamping is required. What identifying information is available for ordering or inventory? Order or reference the item by SKU 222-2 or GTIN 8680731505917 for accurate identification. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180° Vertical Clamp 2.5 kN Clamping Force, 6.5 kN Holding Force, Blackened Steel - Kukamet
Take advantage of a robust combination of secure holding and compact installation: the clamp delivers 2,500 N clamping force with a 6,500 N holding capacity, and its vertical foot mounting at 180° provides clear access for fixtures. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertikalspanner 224 – Vertical toggle clamp with 2,500 N clamp force and 6,500 N holding force (Kukamet) The Vertikalspanner 224 is a vertical toggle clamp engineered for reliable workholding in jigs and fixtures, offering a compact vertical-foot mount and a full 180° lever angle for flexible positioning. 2,500 N maximum clamping force 6,500 N maximum holding force Vertical foot mounting, 180° lever angle Blackened finish for corrosion resistance High clamping performance that reduces rework and stoppages The vertical toggle clamp is designed to deliver consistent clamping force and repeatable results, with a rated 2,500 N clamping capability and a 6,500 N holding capacity that together secure workpieces under machining and assembly loads. This combination reduces slippage and part movement, which in turn lowers scrap rates and shortens set-up times. The robust force ratings support efficient cycle times and provide a measurable improvement in process reliability for small-batch production and assembly operations. Built for everyday workshop use with low maintenance needs A durable construction and a blackened finish give the device resistance to workshop conditions, helping to limit visible wear and slow surface corrosion. The component’s mass of 2.1 kg strikes a balance between solidity and handling ease, allowing installation without excessive support structure while remaining durable under repeated actuation. The protective finish is intended to reduce maintenance intervals and keep the clamp operating smoothly in a variety of environments, contributing to predictable long-term performance. Space-saving mount and ergonomic lever geometry for fixture integration The clamp’s vertical foot mounting and 180° lever geometry permit installation where lateral space is restricted and provide clearance above the workpiece when the lever is released. That layout simplifies integration into existing jigs and tooling plates and supports ergonomic actuation in confined areas. The compact footprint and predictable toggle action make this clamp suitable for assembly lines, welding fixtures and testing jigs where access and repeatability are essential. Practical choice backed by dependable supply and application support Selecting this toggle clamp supports a rational upgrade of workshop tooling, focusing on measurable gains in process stability and throughput. Through Metav’s distribution and quality filtering in Emmerich, customers benefit from a consistent supply chain and application advice that helps match the clamp to the task. The device aligns with standard fixture practice and is a cost-effective way to raise clamp reliability while keeping integration straightforward. For integration advice or to secure supply of the Kukamet Vertikalspanner 224, contact Metav Werkzeuge for tailored guidance and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s consultants can advise on mounting and compatibility with existing fixtures Technical data Article number: 224-6 GTIN: 8680731503487 Manufacturer: Kukamet Facts Clamping force: 2,500 N Holding force: 6,500 N Weight: 2.1 kg Lever angle: 180° Special features Mounting: vertical foot Finish: blackened (Schwarz brüniert) Category: vertical toggle clamp eClass: 21041717 ETIM: EC011973 FAQ What materials is this clamp suitable for? The clamp is a general-purpose toggle device; material suitability depends on fixture design rather than the clamp itself. The Vertikalspanner 224 provides high holding capacity and is commonly used with metals and engineered plastics in secure jigs. How is the clamp mounted and what clearance is required? Mounting is via a vertical foot that fixes to the fixture or baseplate; the 180° lever angle ensures that the handle clears the workpiece when released, simplifying installation in confined setups. Is the finish corrosion-resistant for shop environments? The blackened finish on this model offers protective surface treatment to resist staining and typical workshop humidity, helping to extend service intervals. Can the clamp be used for welding fixtures and assembly jigs? Yes — the device’s holding and clamping ratings make it suitable for welding and assembly applications where stable, repeatable positioning is required. What identification does the product carry for ordering? The unit is supplied under SKU 224-6 with GTIN 8680731503487, facilitating straightforward reordering and inventory tracking. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180° Vertical Clamp 7000 N Max Force Blackened Finish 0.94 kg - Kukamet
Take advantage of a combination of high clamping force, compact design and easy integration for reliable fixture performance; the Kukamet Vertikalspanner 222 delivers consistent results in production and jig applications—order via Metav Werkzeuge or consult our specialists for adaptation to specific setups. Kukamet Vertikalspanner 222 – Vertical lever clamp with 7,000 N clamping force The Vertikalspanner 222 is a vertical clamp engineered for secure, repeatable clamping in jigs, fixtures and bench-mounted assemblies. Vertical mounting with upright foot 7,000 N maximum clamping force 180° handle travel for accessible operation Blackened finish for durable surface protection Secure, high-force clamping for stable machining and assembly With a rated 7,000 N clamping capacity, this vertical lever clamp provides a clearly defined holding performance that reduces workpiece movement during machining and assembly cycles. The stated clamping force describes the maximum axial force applied by the clamping element; selecting a clamp with a clearly specified force simplifies fixture design and helps to avoid under- or over-clamping. The compact mechanism is intended for integration into production jigs where predictable repeatability and short cycle times are required, supporting efficient throughput and reduced rework. Compact construction and resilient finish for longevity in workshops The device combines a low mass with a robust surface treatment: at 0.94 kg it is simple to position and handle during installation, while the blackened finish protects against light corrosion and wear in workshop environments. The modest weight reduces additional load on moving fixtures and makes retrofitting to existing plates or modular tooling straightforward. The surface treatment is intended to extend service life where parts are handled frequently and to maintain consistent appearance and function over many cycles. Accessible operation and flexible mounting for practical use A 180° handle travel gives clear open and closed positions and enables quick loading and unloading of components even where space is constrained. The upright foot mounting allows the clamp to be fixed vertically to base plates or fixture blocks, creating a low-profile arrangement that keeps the clamping arm clear of surrounding tooling. As a lever clamp, the mechanism converts handle movement into a reliable clamping action, offering tactile feedback on engagement and supporting rapid manual operation in assembly or inspection tasks. Practical choice for general clamping tasks in production and repair The unit is designed as a straightforward, robust clamp for standard industrial applications where a dependable holding force and simple installation are required. Supplied by Kukamet and distributed through Metav Werkzeuge, the component benefits from established supply logistics and documentation suitable for small-series production or workshop refurbishment. Selection of a clearly specified clamp such as this reduces design uncertainty in fixtures and contributes to more consistent process control on the shop floor. Contact Metav Werkzeuge for order placement or technical advice on integrating the Kukamet vertical clamp 222 into fixtures—email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance and fast dispatch from Emmerich. Technical data Article number: 222-4 Name: Vertikalspanner 222 Manufacturer: Kukamet EClass: 21041717 ETIM: EC011973 GTIN: 8680731504248 Facts Clamping force max: 7,000 N Weight: 0.94 kg Angle / handle travel: 180° Special features Finish: blackened (brüniert) Mounting: upright foot (vertical mounting) Type: lever clamp Special features: none FAQ What maximum clamping force does the clamp provide? The Kukamet Vertikalspanner 222 provides a maximum clamping force of 7,000 N, specified for design and fixture calculations. How is the clamp mounted in a fixture? Mounting is via an upright foot for vertical installation; the vertical foot enables secure fixing to base plates or fixture blocks. What does the 180° specification mean for operation? The 180° specification describes the handle travel between open and closed positions, allowing clear visual and tactile indication of clamp engagement. Is the surface treatment corrosion resistant? The clamp has a blackened surface treatment intended to improve resistance to light corrosion and wear in workshop conditions. Which category of clamp is this unit and where is it best used? This is a lever-type vertical clamp, suitable for jigs, fixtures and bench-mounted assemblies where repeatable manual clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180° Vertical Clamp Vertical Foot Mount 7000 N Press Force Blackened Steel - Kukamet
Vertically mounted design and 7,000 N clamping capacity ensure robust fixture security; combine high holding power, a compact footprint and a durable blackened finish for reliable production. Order the vertical clamp directly via Metav Werkzeuge or ask the consultants for application advice. Vertical clamp 232 — Vertical clamp with 7,000 N clamping force (Kukamet) Vertical clamp 232 is a compact vertical clamping unit designed for jigs and fixtures where strong, reliable holding and flexible positioning are required. Vertical clamp with vertical foot mounting Max clamping force 7,000 N Compact design, lightweight 0.83 kg 180° pivot angle for flexible positioning Secure holding that stabilises machining and assembly The high clamping force of 7,000 N provides a measurable increase in fixture stability compared with lower-capacity clamps. A reliably applied force reduces micro-movement during machining or assembly operations, translating into fewer rejects and more consistent part quality. In practice, clamping force denotes the maximum axial load the device sustains without slippage; this makes the unit particularly suitable for repetitive production tasks and robust manual fixtures. The result is improved process reliability while maintaining straightforward integration into existing setups. Compact footprint for denser fixture layouts and fast reconfiguration With a compact design and a weight of 0.83 kg, this vertical clamping unit allows more clamping points in a limited table area and keeps the overall fixture mass low. The vertical foot mounting enables direct attachment to uprights and baseplates without complex adapters, while the 180° pivot angle gives freedom to position the clamping arm where it best supports the workpiece. The combination of low weight and narrow construction helps reduce cycle times through simpler tooling arrangements and quicker changeovers, supporting efficient workshop workflows. Durable finish and straightforward mechanical integration Finished in a blackened finish, the unit resists surface corrosion and presents a professional appearance in the workshop environment while requiring minimal upkeep. The vertical mounting concept is compatible with common fixture plates and stands, enabling direct replacement of older clamping elements. The mechanism is built for repetitive operation and predictable behaviour, which aids process planning and fixture standardisation across multiple stations. For specific mounting instructions or to confirm compatibility with an existing jig, Metav Werkzeuge provides technical guidance and parts matching. Select the Kukamet vertical clamp 232 for dependable 7,000 N holding and compact fixture integration — contact Metav Werkzeuge in Emmerich for availability and tailored application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 232-4 GTIN: 8680731504255 Manufacturer: Kukamet Core specifications Clamping force: 7,000 N Weight: 0.83 kg Pivot angle: 180° Mounting: vertical foot Finish: blackened Materials & features Blackened finish Vertical mounting foot Compact, lightweight design SKU: 232-4 FAQ What is the maximum clamping force of this unit? The vertical clamp 232 delivers a maximum clamping force of 7,000 N, providing firm and reliable holding for fixture and jig applications. How is the clamp mounted? Mounting is via a vertical foot, allowing direct attachment to fixture plates or uprights; the design supports straightforward mechanical integration. Is the unit lightweight enough for modular fixtures? Yes—the device weighs 0.83 kg, supporting modular and reconfigurable fixture layouts without adding excessive mass. Can the clamp be rotated to different positions? The clamp offers a 180° pivot angle, enabling flexible positioning of the clamping arm to suit various workpiece geometries. What finish does the clamp have and how does it hold up in workshop conditions? The clamp has a blackened finish, which improves surface durability and reduces corrosion risk under typical workshop conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180° Vertical Clamp With Vertical Base 2 500 N Clamping Force, Blackened - Kukamet
Take advantage of the combination of high holding force, compact weight and corrosion-resistant finish for safe fixture clamping in demanding workshop environments. Combine the 2500 N clamping capacity with vertical-foot mounting and a compact black blued finish to keep set-ups stable. Order the vertical clamp directly via Metav Werkzeuge or consult our advisers if needed. Vertical clamp 223 — Kukamet vertical clamp with 2500 N clamping force and black blued finish A vertical clamp 223 engineered for secure vertical mounting in jigs, fixtures and assembly stations, providing a compact solution for repeatable clamping tasks across production and repair workshops. 2500 N clamping force Vertical-foot mounting Black blued finish Compact weight 0.22 kg Consistent performance where repeatability matters The clamp delivers a clear technical advantage through its 2500 N maximum clamping force, which ensures reliable retention of parts during machining or assembly. Specified for vertical-foot mounting, the device integrates directly into workholding fixtures and baseplates, reducing setup complexity. The mechanical design provides steady holding power with minimal play, helping to maintain process repeatability and reduce scrap rates in batch production. Compatibility with common jig layouts makes it a practical choice for small-series and repair workshops. Space-saving design that eases handling and installation Weighing only 0.22 kg, the unit is intentionally light to simplify manual placement and repositioning on tooling plates without compromising stability. The compact dimensions and 180° swing or adjustment angle enable flexible orientation inside tight fixture arrangements. This balance of low mass and robust clamping capacity supports ergonomic handling for technicians while enabling quick changes between operations, which can improve throughput on manual and semi-automated lines. Durable finish for everyday workshop conditions The black blued finish provides an additional layer of protection against corrosion and surface wear, extending service life under typical shop-floor conditions. Materials and surface treatment make the clamp suitable for general mechanical environments where occasional coolant or humidity exposure occurs. The straightforward construction minimises maintenance requirements; periodic visual checks and routine lubrication of moving parts are usually sufficient to preserve function and accuracy over time. Practical integration and application notes Designed as a standard clamp element for fixtures and workholding assemblies, the product suits a broad range of applications from assembly jigs to holding small components for inspection. The simple geometry and vertical-foot mounting reduce the need for elaborate adapters; where bespoke mounting is required, standard plate machining suffices. The component’s measured characteristics support selection decisions when calculating fixture load capacities and determining clamping sequences in multi-station processes. For dependable, compact clamping from Kukamet, request the Vertical clamp 223 via Metav Werkzeuge or contact our Emmerich team for application advice and ordering guidance. Technical data Article number: 223-2 GTIN: 8680731502183 ECLASS: 21041717 ETIM: EC011973 Facts Maximum clamping force: 2500 N Weight: 0.22 kg Angle: 180° SKU: 223-2 Special features Mounting: vertical foot Finish: black blued Category: Clamp (Spanner) Manufacturer: Kukamet FAQ What is the maximum holding force of the clamp? The Kukamet vertical clamp 223 offers a maximum clamping force of 2500 N, suitable for secure retention in many fixture applications. How is the clamp mounted to a fixture? Mounting is via a vertical foot; the vertical-foot mounting design of the 223 allows direct installation on plates and bases used in jigs and fixtures. Is the finish resistant to workshop conditions? The black blued finish on the vertical clamp 223 provides enhanced corrosion resistance and everyday wear protection for standard workshop environments. Can the clamp be used in tight spaces? Yes, at only 0.22 kg and with a 180° adjustment angle, the clamp is designed for compact installations and flexible orientation within confined fixtures. Which applications suit this clamp best? The clamp is intended for use in jigs, fixtures and assembly stations where reliable, repeatable vertical clamping is required; it is well suited to small-series production and maintenance tasks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180° Vertical Clamp, 2,500 N Clamping Force, Blackened Finish - Kukamet
Compact and reliable clamping delivered: the combination of a 2,500 N clamping force, a 180° lever swing and a lightweight 0.2 kg body ensures secure, repeatable workholding in confined fixtures. Order directly via Metav Werkzeuge or ask our consultants for specification support. Kukamet Vertikalspanner 232 – Vertical lever clamp with 2,500 N clamping force The Vertikalspanner 232 is a compact vertical lever clamp designed for fast, secure clamping in jigs, fixtures and small assembly stations. Robust 2,500 N clamping force 180° lever swing for versatile positioning Vertical foot mounting for stable attachment Black oxide finish for corrosion resistance Compact clamping that keeps production moving This vertical lever clamp delivers a high clamping force in a compact package, making it suitable where space is limited but process reliability is essential. The combination of a firm 2,500 N holding capacity and a short, efficient lever reduces cycle times during manual and semi-automatic operations. The vertical foot mounting simplifies integration into fixtures and tooling plates, while the low mass of 0.2 kg minimises added load on moving jigs. For production planners and maintenance teams, this equates to fewer fixture redesigns and a predictable clamping performance that supports consistent part positioning. Smooth handling and versatile positioning for fixtures The clamp’s 180° lever swing enables flexible approach angles and clear access for loading and unloading components. The lever mechanism functions as a reliable toggle-style action, converting operator input into a stable clamping force with minimal adjustment. For applications that require quick cycle times, the design reduces operator fatigue and speeds repeatability. Engineers unfamiliar with toggle mechanics will find the principle straightforward: the lever locks the clamp in place, creating a secure mechanical advantage that maintains grip without continuous effort. Durable finish and construction for workshop environments Finished in a black oxide coating, the clamp resists corrosion and maintains appearance in workshop conditions. The surface treatment improves longevity where occasional coolant splash or humid storage might otherwise accelerate wear. Constructed for repetitive use, the component parts are dimensioned to suit jigs and light-duty fixtures common in metalworking and assembly shops. Where traceability matters, the clamp’s SKU and GTIN facilitate inventory management and procurement within existing systems. For purchase recommendations or to discuss integration of the Kukamet vertical lever clamp into existing tooling, contact Metav Werkzeuge for expert advice and fast, reliable supply from Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 232-2 GTIN: 8680731505955 ECLASS: 21041717 ETIM: EC011973 Core measurements Clamping force: 2,500 N Weight: 0.2 kg Lever angle: 180° Mounting type: vertical foot Materials & features Finish: black oxide Application: lever/ toggle clamping for fixtures Category: clamps Brand: Kukamet FAQ What clamping force does the clamp provide? The vertical clamp provides a clamping force of 2,500 N, suitable for light to medium workholding tasks in fixtures and jigs. How is the clamp mounted to a fixture? Mounting is via a vertical foot, enabling direct attachment to plates or jig surfaces for stable positioning. Is the finish resistant to workshop conditions? Yes, the black oxide finish offers improved corrosion resistance and is suited to general workshop environments. Can the clamp be used in automated fixtures? The compact design and toggle action make it appropriate for semi-automated or automated fixtures where the lever motion can be accommodated. What is the product SKU for ordering and inventory? The SKU is 232-2 and the GTIN is 8680731505955 for procurement systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180° Vertical Clamp, Vertical Base, 2,500 N Thrust, Blackened Finish - Kukamet
Benefit from the combination of compact mass, reliable 2.5 kN clamping force and a corrosion-resistant black oxide finish for dependable, repeatable holding in light workshop and production fixtures. Order the clamp directly via Metav Werkzeuge or consult the specialists for application-specific advice. Vertical clamp 233 — Kukamet, 2.5 kN clamping force The Vertical clamp 233 is a compact vertical clamp with vertical-foot mounting, designed for secure, repeatable clamping in light-duty workshop and fixturing applications. 2.5 kN maximum clamping force Vertical-foot mounting for stable installation Black oxide finish for corrosion resistance Compact design at 0.2 kg for minimal load Reliable holding force for small fixtures The 2.5 kN maximum clamping capacity offers a clear technical advantage when consistent, medium-duty clamping is required. Specified clamping force is a measurable assurance of performance: the force rating explains how firmly components are held during assembly or light machining and provides a basis for fixture design. With a focus on predictable performance and repeatable clamping, the unit supports quality control by reducing part movement and rework in jigs and small production runs. Quick mounting and precise positioning for repeatable results Designed for a vertical foot mounting, this clamp integrates directly into benches and fixture plates with minimal adaptation. The mechanism allows a full 180° operating arc, enabling flexible lever positioning where space is restricted or multiple clamps must be arranged close together. The straightforward fixing method reduces setup time and supports consistent part indexing in repetitive processes, which improves throughput and reduces layout errors during batch production. Corrosion-protected finish and light overall mass A black oxide finish gives surface protection while keeping the visual appearance discreet in manufacturing environments. The low mass of 0.2 kg reduces the load on fixture assemblies and minimises inertia in dynamic setups, aiding fast handling and lowering the mechanical strain on substructures. These physical characteristics combine to extend life in regular use and simplify handling when reconfiguring fixtures or relocating jigs between workstations. Where this clamp adds the most value The lever-style construction and compact footprint make the clamp particularly suitable for assembly jigs, inspection fixtures, welding aids and light machining operations where space and repeatability matter. The lever-action provides a tactile and audible confirmation of clamping, useful on busy production floors for quick visual checks. The compact design supports modular fixturing philosophies and is especially beneficial where many clamping points must be integrated without excessive bulk. Contact Metav Werkzeuge to confirm technical suitability and to secure the Kukamet Vertical clamp 233 from our Emmerich stock, including application advice and order processing Technical Data SKU: 233-2 Manufacturer: Kukamet GTIN: 8680731505962 Facts Clamping force max: 2,500 N Weight: 0.2 kg Angle: 180° eCl@ss: 21041717 ETIM: EC011973 Special features Mounting: vertical foot Finish: black oxide finish Typical application: lever clamp / spanner Catalog page: 232-233-katalogseite.pdf FAQ What clamping force can be expected from this clamp? The clamp achieves a maximum clamping force of 2,500 N; the Kukamet Vertical clamp 233 is specified for reliable medium-duty holding in fixtures and light machining tasks. How is the clamp mounted to a fixture plate? Mounting is via a vertical foot, which secures the clamp directly to benches or fixture plates for stable installation and straightforward alignment. Is the finish suitable for industrial environments? Yes, the black oxide finish provides corrosion resistance appropriate for workshop conditions while maintaining a low-maintenance surface. Will the clamp fit into compact fixturing arrangements? The compact mass (0.2 kg) and 180° operating arc make this clamp well suited to tight layouts and modular fixtures where space and repeatability are priorities. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
181mm Push Rod Clamp 15 With Automatic Jaw Adjustment 1100N - BESSEY
The BESSEY push-rod clamp combines automatic width adjustment with a reliable 1,100 N clamping capacity, offering fast set-up and secure holding in compact workshop settings; order the clamp directly via Metav Werkzeuge or consult the specialists for application support. BESSEY Push-rod Clamp, Size 15 — automatic width adjustment, 1,100 N The BESSEY Push-rod Clamp, Size 15 is a compact clamping device for workshop and maintenance tasks, featuring automatic clamping-width adjustment for fast, repeatable positioning. Automatic clamping-width adjustment Max. clamping force 1,100 N Compact 181 × 42 × 32 mm footprint Size 15 for light workshop applications Faster set-up through automatic width adjustment The automatic width adjustment shortens set-up time by adapting the clamping head to the workpiece without manual reconfiguration. This mechanism reduces handling steps and minimises fixture changes, enabling quick setup across varying part sizes. The simple adjustment principle is particularly useful where repeated repositioning would otherwise slow down production or maintenance routines. The reduced set-up overhead supports a steadier workflow and fewer interruptions on the shop floor. Consistent holding force for reliable results A rated 1,100 N maximum clamping force ensures a stable grip for many routine clamping operations, offering consistent pressure across repeated cycles. Expressed in newtons, this figure describes the mechanical pushing capability of the device and is a practical reference when comparing clamps for comparable tasks. The even force distribution provided by the mechanism helps to maintain part alignment during assembly or gluing operations, reducing the risk of slippage and rework. Compact design for confined workspaces With compact dimensions of 181 × 42 × 32 mm, the clamp is designed to fit tight fixtures and limited bench space without compromising accessibility. Its modest footprint makes it straightforward to incorporate into existing jigs or temporary setups. The size 15 designation denotes the device’s suitability for lighter-duty applications where space is at a premium, while still providing a professional-grade clamping solution for routine workshop and maintenance tasks. Seamless procurement and dependable supply chain Integration of this clamp into an assembly or maintenance toolkit is supported by Metav’s focused distribution and technical advisory from Emmerich. The product’s straightforward specification and single-item packaging unit simplify purchasing and storage decisions. As a partner for precision tools, Metav combines wide selection with hands-on advice, enabling informed choices and dependable supply for workshop managers and procurement teams. The combination of practical design and distribution reliability supports efficient workshop operation without unnecessary complexity. For procurement or application advice on the BESSEY Push-rod Clamp, Size 15, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: 4000831138NW Article: BESSEY Push-rod Clamp, Size 15 Manufacturer: BESSEY Facts Max. clamping force: 1,100 N Length: 181 mm Width: 42 mm Height: 32 mm Special features Automatic clamping-width adjustment Size: 15 Product type: Push-rod clamp Packaging unit: 1 FAQ What is the maximum clamping force of the clamp? The clamp offers a maximum clamping force of 1,100 N as specified for the BESSEY Push-rod Clamp, Size 15 (SKU 4000831138NW). What are the external dimensions of the clamp? The device measures 181 mm in length, 42 mm in width and 32 mm in height. Does the clamping width adjust manually or automatically? The clamping width is adjusted automatically; the mechanism adapts to different workpiece sizes for quicker set-up. How is the product supplied? The clamp is supplied as a single unit (packaging unit: 1). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm Pneumatic Push Rod Clamp Horizontal Foot 4.5kN Push, 8.8kN Hold, Zinc Plated Cast Body - Kukamet
The combination of a high holding force, compact piston design and robust zinc-plated cast body ensures stable clamping cycles and long service life in automated fixtures; order the pneumatic push rod clamp 671 directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic Push Rod Clamp 671 — Kukamet, 4,500 N pressing force, zinc-plated cast body The Pneumatic Push Rod Clamp 671 is a compact pneumatic clamp designed for repetitive fixture and automation tasks, offering high holding performance in a horizontal-foot mounting format. High holding force 8,800 N Max pressing force 4,500 N Zinc-plated cast body for durability Horizontal-foot mounting for simple integration dependable clamping performance for continuous production The Pneumatic Push Rod Clamp 671 delivers consistent, measurable results thanks to its combination of max pressing force and holding force ratings. With a pressing force of 4,500 N and a holding force of 8,800 N, the unit is suitable for demanding cycle work where secure immobilisation of parts is essential. The measurable forces provide a factual basis for fixture design, enabling planning for clamping sequences and component stresses within production cells. engineered for endurance and straightforward installation Constructed with a zinc-plated external finish and a cast body, the clamp is built to resist wear and corrosion in workshop environments. The horizontal-foot mounting simplifies attachment to jigs and plates, reducing fixture modification time and supporting repeatable alignment. The compact design and modest mass of 2.14 kg reduce inertial load on moving assemblies, while the mechanical layout supports reliable pneumatic actuation over long maintenance intervals. precise actuation and compact footprint for automated fixtures A piston diameter of 18 mm provides the mechanical basis for fast, repeatable actuation cycles with controlled stroke behaviour. The push-rod principle converts pneumatic pressure into direct axial clamping force, making the device suitable for inline automation and CNC fixturing where controlled linear thrust is required. The compact footprint helps conserve space on multi-station fixtures and permits straightforward sequencing with other pneumatic components. practical benefits for engineering and workshop teams Specifying the unit in a clamping layout offers clear technical advantages: predictable force values for finite-element or process planning, a corrosion-resistant exterior for extended life, and a mounting form factor that reduces integration effort. These attributes support predictable uptime and simplified spare-part management within production logistics, contributing to smoother workflows and reduced unplanned downtime. Contact Metav Werkzeuge to discuss integration options for the Kukamet Pneumatic Push Rod Clamp 671, request technical matching for fixtures or obtain delivery details from our Emmerich location. Technical data Article number: 671-4-Q18 GTIN: 8680731503197 Manufacturer: Kukamet ECLASS: 21041716 ETIM: EC011973 Facts Weight: 2.14 kg Max pressing force: 4,500 N Max holding force: 8,800 N Piston diameter: 18 mm Special features Finish: zinc-plated Body: cast construction Mounting: horizontal foot Actuation: pneumatic push-rod clamp Category: Spanner FAQ What maximum clamping and holding forces does the unit provide? The Kukamet Pneumatic Push Rod Clamp 671 provides a maximum pressing force of 4,500 N and a maximum holding force of 8,800 N, values suitable for robust fixture applications. What is the piston diameter and why is it relevant? The piston diameter is 18 mm; this dimension influences stroke speed, air consumption and the mechanical force available for each actuation, which helps when calculating cycle times and pneumatic supply requirements. Which mounting option is provided for fixture integration? The device uses a horizontal-foot mounting arrangement, enabling straightforward bolting to plates and jigs for repeatable positioning within automated fixtures. What materials and finishes are used to increase durability? The clamp features a zinc-plated exterior with a cast body, providing corrosion resistance and a sturdy structural base for repeated industrial use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm Pneumatic Push Rod Clamp, 4.5kN Thrust, 8.8kN Holding Force, Zinc-Plated Cast Body - Kukamet
Take advantage of robust clamping performance and durable construction for consistent cycle times and secure fixturing. With a compact piston design and simple horizontal mounting, the unit supports efficient integration into pneumatic supply systems. Order the clamp via Metav Werkzeuge or contact our consultants for installation details. Pneumatic Push-rod Clamp 641 — Horizontal foot, 4,500 N push force (Kukamet) A compact Pneumatic Push-rod Clamp 641 designed for reliable workholding in machining, assembly and fixture applications across industrial workshops. High push force 4,500 N High holding force 8,800 N Galvanised cast body, robust construction Consistent clamping force for stable production The clamp delivers a repeatable push force of 4,500 N and a holding force of 8,800 N, ensuring components remain immobile during machining and handling. These rated forces translate into fewer rejects and less rework because the fixture sustains loads without micro-movement; the distinction between push and holding forces is crucial for process planners and fixture designers. The specified values are engineering-grade indicators of performance and can be used to calculate safety factors and cycle loads for automated systems. Built for workshop resilience and precise mounting Constructed with a galvanised finish and a cast body, the unit resists corrosion while offering the rigidity needed for accurate clamping. The compact mass of 2.57 kg balances stability with easy handling during fixture assembly. A horizontal foot mounting arrangement simplifies attachment to tooling plates and allows predictable force vectors, which reduces setup time and alignment iterations. Galvanisation protects cast surfaces from routine environmental effects and reduces the need for frequent part replacement, supporting longer mean time between service operations. Pneumatic efficiency and compact actuation Actuation is pneumatic with a piston diameter of 18 mm, providing quick response and low inertia for short cycle times. The smaller piston size permits compact installation while still delivering substantial force, making the clamp appropriate for confined fixtures or multi-station jigs. Integration with standard compressed-air supplies is straightforward; pressure and flow requirements can be calculated from the piston diameter and required cycle rate. The mechanical simplicity of a push‑rod design also reduces potential failure modes compared with more complex actuators. Supply reliability and proven sourcing for industrial buyers Sourcing through an established partner adds operational value: Metav combines extensive product availability with industry-grade logistics, supporting just-in-time requirements and bulk procurement. The clamp’s specifications and material finish make it suitable for continuous production environments where repeatability and durability matter. Choosing a recognised supplier reduces procurement risk and ensures access to compatible components, spare parts and documentation, reinforcing compliance with internal quality standards. Contact Metav Werkzeuge to discuss incorporating the Kukamet pneumatic push-rod clamp 641 into existing fixtures or to request technical integration advice from our specialists Technical data SKU: 641-4-Q18 GTIN: 8680731503067 eClass: 21041716 ETIM: EC011973 Facts Maximum push force: 4,500 N Maximum holding force: 8,800 N Piston diameter: 18 mm Weight: 2.57 kg Special features Pneumatic actuation Horizontal foot mounting Galvanised finish Cast body construction Category: Clamping device Manufacturer: Kukamet FAQ What is the maximum clamping force of this clamp? The clamp provides a maximum push force of 4,500 N and a holding force of 8,800 N, as specified for the Kukamet Pneumatic Push-rod Clamp 641 (SKU 641-4-Q18). Can the clamp be mounted on standard tooling plates? Yes, the horizontal foot mounting is designed for attachment to common tooling plates and fixture bases, enabling straightforward integration into jigs and assemblies. Is the finish suitable for humid workshop environments? The galvanised surface and cast body offer improved corrosion resistance, making the unit suitable for typical workshop conditions where occasional moisture or coolant exposure occurs. What pneumatic connection and performance can be expected from the piston diameter? With a piston diameter of 18 mm, the clamp requires standard compressed-air supply parameters; this compact actuator achieves quick response times while providing the rated clamping force for efficient cycle rates. Does the clamp support heavy-duty production use? The combination of a cast body, galvanised finish and the specified holding force makes the clamp appropriate for continuous production and repeatable machining tasks where long-term stability is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm Push Rod Clamp 4.5kN Push Force, 8.8kN Hold Force, Zinc Plated Cast Body - Kukamet
Take advantage of the combination of robust construction, reliable clamping force and compact installation for efficient fixture work; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Push-rod clamp 532 — Kukamet push-rod clamp with horizontal foot and 4,500 N pressing force The Push-rod clamp 532 is a compact push-rod clamp designed for horizontal mounting in fixtures and jigs, providing a predictable clamping action for assembly and machining applications. Galvanised cast body for durability Horizontal foot mounting for fixture integration 4,500 N pressing force and 8,800 N holding force Pressure spindle M10x70 with piston Ø18 mm Robust construction that keeps fixtures running The galvanised cast body delivers long-term resistance to workshop conditions while maintaining dimensional stability for repeatable results. With a 4,500 N pressing force and an 8,800 N holding force, this clamp supplies the performance required for light- to medium-duty production tasks. The heavy-duty cast construction reduces deformation under load, which translates into consistent clamping behaviour and fewer re‑setups on production lines. Corrosion protection through galvanisation supports longevity in environments where coolant splash or humidity are present. Compact mounting and straightforward operation save assembly time Fitted with a horizontal foot and a pressure spindle M10x70, the clamp is engineered for simple integration into existing fixtures and welding jigs. The piston Ø18 mm provides a compact stroke profile, while the device’s low mass (approx. 1.06 kg) eases retrofitting and reduces inertia on moving sub-assemblies. Pressing force denotes the force applied to the workpiece during clamping; holding force indicates the clamp’s retention capability when engaged. This distinction helps in selecting the appropriate model for machining, assembly or inspection fixtures where secure positioning and rapid actuation are essential. Reliable repeatability for workshop and small-series production Engineered for frequent cycles, the mechanism offers dependable repeatability that cuts setup times and minimises scrap. The push-rod format is particularly suitable where a straight-line clamping action is required without adding bulk, and the compact design leaves more space for tooling and material handling. Made with practical workshop needs in mind, the clamp supports efficient jig design and tight fixture layouts, helping maintain throughput in small-series production and repair shops while delivering the robustness expected in industrial applications. Contact Metav Werkzeuge for tailored fixture recommendations and to arrange delivery of the Kukamet Push-rod clamp 532; eMail info@metav-werkzeuge.com or call +49 2822 7131930 for technical consultation and fast supply from Emmerich. Technical data Article number / SKU: 532-4-Q18 GTIN: 8680731504477 ECLASS: 21041716 ETIM: EC011973 Facts Maximum pressing force: 4,500 N Maximum holding force: 8,800 N Piston diameter: 18 mm Mass: 1.06 kg Special features Mounting type: horizontal foot Pressure spindle: M10x70 Material: galvanised with cast body Category: Spanner FAQ What is the difference between pressing force and holding force? Pressing force describes the load applied to the workpiece during the active clamp stroke, while holding force indicates the retention capacity once the clamp is engaged; the Kukamet Push-rod clamp 532 lists 4,500 N pressing force and 8,800 N holding force. Can the clamp be mounted on a custom fixture base? Yes. The horizontal foot design of the Push-rod clamp 532 is intended for straightforward attachment to bespoke fixture plates and jigs for assembly or machining. Is the clamp suitable for use in humid or coolant-exposed environments? The clamp’s galvanised cast body provides improved corrosion resistance, making the model suitable for workshop conditions where occasional coolant or humidity is present. What are the spindle and piston specifications for adjustment and travel? The unit is equipped with a pressure spindle M10x70 and a piston diameter of 18 mm, offering compact stroke geometry for tight fixture layouts. How heavy is the clamp and does its weight affect integration? With a mass of approximately 1.06 kg, the clamp is lightweight enough for easy retrofit into tooling assemblies while remaining robust for repeated clamping cycles. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm Push Rod Clamp Horizontal Foot 4.5kN Push Force 8.8kN Hold Force Zinc Cast Body - Kukamet
Reliable clamping performance is achieved through the combination of a zinc-plated cast body and up to 8,800 N holding force, delivering secure fixturing for production and workshop applications. The compact, 1.06 kg construction with an M10×70 pressure spindle enables straightforward integration into existing jigs. Order the 536 pushrod clamp directly via Metav Werkzeuge or consult our specialists if further specification is required. 536 pushrod clamp by Kukamet — 8,800 N holding force, zinc-plated cast body The 536 is a horizontal-foot pushrod clamp designed for robust workholding in production fixtures and workshop benches, combining high holding force with compact dimensions for flexible integration. Zinc-plated cast body for durability 8,800 N maximum holding force 4,500 N max pressing force M10×70 pressure spindle Horizontal-foot mounting Secure hold for heavy-duty fixturing High mechanical retention is provided by the clamp’s 8,800 N holding force, ensuring that components remain stationary during machining, assembly or inspection. The difference between holding force and pressing force is important here: the former refers to the maximum retention once clamped, while the latter—4,500 N—indicates the maximum force the pressure spindle can apply during engagement. This distinction helps when specifying a fixture for repetitive operations or for parts subject to lateral loads, offering a predictable safety margin for stable processing. Compact integration that saves space and time With a weight of 1.06 kg and a horizontal-foot mounting arrangement, the clamp fits into confined fixture layouts without adding excessive mass. The M10×70 pressure spindle provides a standardised interface for adjustment and actuation, allowing quick retrofitting to existing jigs and modular clamping plates. The compact footprint reduces interference with tooling paths and simplifies handling during setup, which supports faster changeovers and improved throughput in small-batch or mixed-production environments. Built to last with low maintenance demands Manufactured with a zinc-plated cast body, the unit resists corrosion and mechanical wear while keeping maintenance intervals minimal. The robust cast construction distributes load effectively and reduces the risk of deformation under repeated use. For routine upkeep, visual checks of the spindle and lubrication points are sufficient; the design avoids complex maintenance procedures, helping to reduce downtime and service costs over the life of the fixture. Practical benefits and typical applications As a pushrod-style clamp with a horizontal-foot base, this device is suited to general workshop fixturing, assembly benches and small machining fixtures where reliable lateral stability is required. The combination of compact mass and high retention force makes it appropriate for holding machined parts during drilling, welding preparation and quality inspection tasks. The unit’s standardised spindle and mounting arrangement streamline replacement and interoperability across fixture designs. For durable and proven workholding with Kukamet quality, contact Metav Werkzeuge for tailored advice and procurement assistance: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number / SKU: 536-4-Q18 GTIN: 8682843521274 Brand: Kukamet Weight: 1.06 kg Material: Zinc-plated with cast body ECLASS: 21041716 ETIM: EC011973 Core technical figures Maximum holding force: 8,800 N Maximum pressing force: 4,500 N Piston / spindle diameter: 18 mm Pressure spindle: M10×70 Design and special features Horizontal-foot mounting Pushrod / lever clamp type Zinc-plated cast body Compact, low-mass construction FAQ What forces are relevant when choosing this clamp? The most relevant figures are the 8,800 N holding force and the 4,500 N pressing force; the first indicates retention once clamped, the second the maximum actuation load applied by the pressure spindle on the 536 pushrod clamp. Is the clamp suitable for installation on modular tooling plates? Yes, the horizontal-foot mounting and the standard M10×70 pressure spindle allow straightforward integration into modular plates and fixtures for workshop and light production use. How heavy is the unit and how does that affect fixture design? The clamp weighs 1.06 kg, which keeps the fixture mass low and reduces dynamic load on moving assemblies while maintaining high retention for stable machining and assembly. What material protection does the clamp provide against corrosion? The device features a zinc-plated cast body, offering enhanced resistance to corrosion and mechanical wear in typical workshop environments. Which SKU should be referenced when ordering spare parts or replacements? Reference the SKU / article number 536-4-Q18 to ensure correct specification and compatibility when ordering replacements or spares. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
191mm Vertical Clamp 3,000N Closing Force, Massive Holding Arm With Safety Lock, Galvanised - Kukamet
Take advantage of a massive holding arm and safety lock combined with a galvanised finish and a holding capacity of up to 3,300 N to secure fixtures reliably; order the clamp directly via Metav Werkzeuge or ask the consultants for application advice. Vertical clamp 213 – Kukamet vertical clamp with 191 mm arm and galvanised finish The Vertical clamp 213 is a compact vertical clamping device designed for workshop fixtures and production jigs, offering robust fixation where repeatable, secure clamping is required. Massive holding arm with safety lock Galvanised finish for corrosion resistance Holding force up to 3,300 N Lightweight 0.93 kg with 191 mm arm Reliable clamping performance for production workflows The vertical clamp delivers clear, quantifiable performance: a holding force of 3,300 N and a maximum pressing force of 3,000 N, making it suitable for repetitive fixture tasks and light industrial assembly. These numerical limits define the operational envelope and enable planners to calculate safety margins precisely. The massive holding arm paired with a safety lock reduces the risk of accidental release during machining or handling, which supports uninterrupted production and fewer process interruptions. Technical compatibility with standard jig layouts is straightforward because the clamp mounts via an angled foot interface that suits common fixture plates. Durable materials and compact design that save space Constructed in galvanised steel, the clamp is protected against corrosive shop environments without adding bulk. At just 0.93 kg and with a 191 mm arm, the unit combines low mass with reach, allowing secure clamping in confined setups or on movable fixtures. The compact footprint lowers the likelihood of collision with tools or workpieces while preserving the required clamping leverage. The durable surface finish minimises maintenance and extends service life, which reduces downtime and the need for frequent replacements — a practical benefit for workshop managers who balance cost and uptime. Practical handling and installation advantages The angled base mounting simplifies integration into existing jigs and makes positioning repeatable across multiple stations. The safety lock provides tactile confirmation of engagement, supporting operator confidence and faster cycle times when multiple clamps are used in sequence. Lightweight construction and the robust arm design together enable easier manual handling during setup without sacrificing clamping capacity. For applications where consistent, secure fixation matters — such as assembly, light machining or inspection fixtures — this clamp offers a straightforward, mechanical solution with minimal auxiliary components. Choose the Kukamet vertical clamp 213 for dependable, compact clamping and contact Metav Werkzeuge for tailored selection and procurement assistance directly from Emmerich Technical Data SKU: 213-4-D-L-C3 GTIN: 8680731502084 Manufacturer: Kukamet Facts Weight: 0.93 kg Arm length: 191 mm Maximum pressing force: 3,000 N Maximum holding force: 3,300 N eClass: 21041717 ETIM: EC011973 Special features Mounting: angled foot Material: galvanised steel Massive holding arm Safety lock Category: clamping device FAQ What clamping force can be expected from this vertical clamp? The clamp provides a holding force of up to 3,300 N and a pressing force of up to 3,000 N, making the Vertikalspanner 213 suitable for many fixture and assembly tasks. Is the clamp suitable for use in corrosive workshop environments? Yes, the galvanised finish protects the clamp against corrosion and reduces maintenance needs, which helps preserve performance in damp or chemically exposed environments. How is the clamp mounted to a fixture plate? The clamp is designed for angled foot mounting, allowing straightforward integration into standard jig plates and repeatable installation across multiple stations. Can the clamp be used where space is limited? With a compact design, a lightweight build of 0.93 kg and a 191 mm arm, the unit fits well in confined setups while still delivering substantial clamping capacity. Does the product include a safety mechanism to prevent accidental release? A mechanical safety lock is integrated to secure the clamping position and provide tactile confirmation of engagement during operation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
191mm Vertical Clamp 3000N Closing Force, Massive Arm with Safety Lock - Kukamet
Combining a massive holding arm with a built-in safety locking mechanism, this clamp secures workpieces with up to 3,000 N clamping force and a 3,300 N holding capacity, promoting reliable throughput in repetitive assembly and fixturing tasks; order the unit via Metav Werkzeuge or consult our specialists for application advice. Kukamet vertical toggle clamp 213 — heavy-duty vertical clamping with safety lock The Kukamet vertical toggle clamp 213 is a vertical toggle clamp designed for secure, repeatable clamping in jigs, fixtures and assembly benches, featuring a robust arm and integrated locking for safe operation Heavy-duty holding arm, 191 mm reach Safety locking mechanism included Holding force up to 3,300 N Angle-foot mounting for secure fit Improved production reliability through robust clamping The clamp’s heavy-duty arm and safety lock provide a tangible increase in process reliability, reducing re-clamping and stoppages. Built for clamping applications that demand consistent force, the device converts operator motion into a stable, locked hold, delivering a clamping force of 3,000 N and a holding force of 3,300 N. These figures mean fewer interruptions for adjustments and a measurable reduction in scrap from slippage, supporting higher throughput and predictable cycle times. Flexible mounting and reach for versatile fixturing Engineered with an angle-foot mounting, the clamp integrates easily into existing fixtures and lays out cleanly on flat plates or jigs. The 191 mm arm reach permits access to recessed or awkward components, enabling secure engagement where short clamps cannot reach. The toggle mechanism offers fast actuation for repetitive operations, which streamlines set-up and reduces cycle time—advantages that translate directly into improved operator efficiency and quicker job changeovers. Durable finish and lightweight design for long service life Finished in a blackened, burnished surface, the clamp resists wear and surface corrosion while providing a professional workshop appearance. At approximately 0.93 kg, the unit balances robustness with ease of handling during assembly or relocation. The combination of sturdy construction and modest mass reduces strain during fixture changes and contributes to long-term durability, making the clamp suitable for small-batch production as well as larger scale repetitive tasks. For dependable heavy-duty clamping and consistent delivery from Emmerich, contact Metav Werkzeuge to discuss the Kukamet vertical toggle clamp 213 and secure tailored advice for integration into existing fixtures. Technical Data SKU: B213-4-D-L-C3 Article name: Vertikalspanner 213 Manufacturer: Kukamet Facts Arm length: 191 mm Clamping force max: 3,000 N Holding force max: 3,300 N Weight: 0.93 kg Special features Angle-foot mounting Massive holding arm Safety locking mechanism Blackened finish FAQ What maximum clamping force does this clamp provide? The vertical toggle clamp offers a maximum clamping force of 3,000 N, with a holding capacity specified at 3,300 N, enabling secure retention in most fixturing applications. Is the clamp suitable for integration into existing jigs and fixtures? Yes, the angle-foot mounting and 191 mm reach make the clamp straightforward to mount on plates and jigs, and it is commonly used in standard fixture layouts. How does the safety locking mechanism work? The integrated safety lock mechanically secures the toggle in the closed position, preventing unintended release; this feature enhances operator safety and process stability when using the vertical toggle clamp. What is the surface finish and how does it affect durability? The unit has a blackened burnished finish which improves resistance to surface wear and mild corrosion, contributing to reliable service life in workshop environments. What are the manufacturer and responsible distributor details for this product? The clamp is produced by Kukamet and supplied via Metav Werkzeuge; see the manufacturer block below for full contact details. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
191mm Vertical Clamp 3000N Hold Force, Massive Arm, Zinc-Plated - Kukamet
Take advantage of a robust, galvanised clamping solution that combines a solid holding arm, a compact 191 mm reach and up to 3,000 N clamping force for repeatable fixture performance; order via Metav Werkzeuge or consult our specialists for installation guidance. Vertical clamp 213 — Kukamet vertical clamp with solid holding arm and galvanised finish The Vertical clamp 213 is a compact, galvanised vertical clamp designed for reliable hold-down duties in workshop fixturing and production jigs, combining a rigid arm and angle-foot mounting for versatile installation. Solid holding arm for secure clamping Galvanised finish for corrosion resistance Angle foot mounting for flexible installation Clamping force up to 3,000 N Consistent, measurable clamping for production use The design focuses on repeatability: the solid holding arm and precise geometry deliver stable positioning and consistent force, supporting efficient cycle times. With a rated clamping force of 3,000 N and a maximum holding force of 3,300 N, the device makes performance quantifiable and comparable in test setups and production fixtures. The compact mass and low overall weight also reduce inertial loads in automated sequences, making the clamp suitable for both manual jigs and semi-automated stations. Robust materials and straightforward mounting reduce downtime A galvanised finish provides corrosion resistance for everyday workshop environments, extending service life and lowering replacement frequency. The angle foot mounting enables mounting on vertical plates, T-slots or custom brackets, simplifying retrofit into existing fixtures. The 191 mm arm reach is engineered to clear nearby tooling while maintaining rigidity; the combination of finish, geometry and mounting flexibility translates directly into less maintenance and fewer interruptions for cleaning or rework. Practical benefits for workshop efficiency and safety Compact form and clear specifications make integration straightforward: lightweight construction (approx. 1.062 kg) minimises added mass, while the combination of holding and clamping ratings supports both static and dynamic applications. The clamp’s robust arm reduces the likelihood of part movement under load, improving first-pass quality and reducing rework. For procurement and inventory control, the clearly defined technical values facilitate selection against process requirements and harmonise with existing clamping systems. Contact Metav Werkzeuge for precise mounting recommendations or to request the Vertical clamp 213 (SKU 213-4-D-C3) and associated data sheets by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: 213-4-D-C3 GTIN: 8680731502053 Model designation: 213 Facts Arm length: 191 mm Clamping force: 3,000 N Holding force: 3,300 N Weight: 1.062 kg eClass: 21041717 ETIM: EC011973 Special features Material: galvanised Mounting type: angle foot Solid holding arm Category: clamp / clamping technology FAQ What clamping and holding forces does the clamp deliver? The Vertical clamp 213 provides a clamping force of up to 3,000 N and a holding force of up to 3,300 N, indicated for repeatable workshop fixturing. Is the clamp suitable for corrosion-prone environments? Yes, the galvanised finish on the Vertical clamp 213 improves resistance to corrosion and is intended for standard workshop conditions. How is the clamp mounted to a fixture? The clamp uses an angle foot mounting, enabling attachment to vertical plates, base plates or adapted fixture brackets for flexible positioning. What is the reach of the clamping arm? The arm length is 191 mm, offering clearance for common tooling while maintaining stability under load. Which SKU or article number is used for ordering and reference? Reference SKU 213-4-D-C3 when ordering or requesting technical documentation for this Kukamet vertical clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2,000 N Closure Clamp Horizontal Base With Hook, Zinc-Plated - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines dependable holding performance with straightforward mounting for fast fixture cycles; order the clamp directly via Metav Werkzeuge or consult the technical advisors if clarification is required. 411 latch clamp – horizontal-foot mounting, zinc-plated (Kukamet) 411 latch clamp constructed for secure fastening in jigs and fixtures with a horizontal-foot base and integrated hook for rapid engagement Horizontal-foot mounting for stable attachment Zinc-plated corrosion-resistant finish 2,500 N maximum holding force Built-in hook for quick engagement Secure clamping that keeps production moving The 411 latch clamp delivers a reliable holding force of up to 2,500 N, ensuring consistent workpiece retention during machining, assembly or inspection tasks. The stated holding value describes the maximum static retention the clamp provides once engaged; this results in fewer re-clamps, fewer interruptions and improved throughput in repetitive operations. For applications requiring a defined pressing action, the device also provides a separate maximum pressing force of 2,000 N, differentiating the functions of securing and compressing components during setup. Robust finish for workshop environments A zinc-plated surface treatment protects the clamp against corrosion and typical workshop wear, extending service life in demanding conditions. The light construction — approximately 0.325 kg — reduces added mass on fixtures while preserving durability, making the clamp suitable for both hand-operated jigs and automated stations where low inertia is beneficial. The integrated hook accelerates engagement and disengagement, reducing cycle time and enhancing operator ergonomics during repetitive fastening tasks. Fast, adaptable installation and adjustment Fitted with a horizontal foot for base mounting, the clamp is compatible with standard bench and fixture plate arrangements and allows for easy alignment in the workholding setup. The thread length 41 mm provides scope for fine positional adjustment and secure anchoring in varying plate thicknesses. Where repeatable positioning is required, the clamp’s design supports straightforward integration into existing tooling, reducing downtime during changeovers and simplifying fixture design. Practical choice for workshop and light industrial use Designed as a pragmatic component for clamping systems, the latch clamp supports a broad range of routine applications such as assembly, packaging and inspection. The combination of a compact footprint, corrosion-resistant finish and defined mechanical ratings yields a dependable solution that contributes to consistent process quality. The product’s straightforward mechanics minimise maintenance needs and make it accessible for users with varied levels of technical expertise. For purchase enquiries or specific application advice regarding the Kukamet 411 latch clamp and its 2,500 N holding capability, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: 411-3 GTIN: 8680731502534 ECLASS: 21041718 ETIM: EC011973 Core specifications Maximum pressing force: 2,000 N Maximum holding force: 2,500 N Thread length: 41 mm Weight: 0.325 kg Special features Zinc-plated material Horizontal-foot mounting With hook for quick engagement Category: Spanner / Clamp FAQ What maximum holding force does this clamp provide? The clamp offers a maximum holding force of 2,500 N, which is the peak static retention capacity of the Kukamet 411 latch clamp (SKU 411-3). Is the clamp suitable for harsh or humid workshop conditions? Yes, the zinc-plated finish on the 411 latch clamp improves corrosion resistance for standard workshop environments. How is the clamp mounted to a fixture plate? The clamp is fitted for horizontal-foot mounting; the foot provides a stable base and the thread length of 41 mm allows secure fastening into a fixture plate. Can the clamp be used for both pressing and holding functions? The device specifies a pressing capacity of 2,000 N and a separate holding capacity of 2,500 N, enabling both clamping and compressive actions in typical jigs. What is the approximate weight of the clamp and does it affect fixture balance? The clamp weighs around 0.325 kg, a low mass that minimises added inertia while maintaining robustness for regular workshop use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2.5 kN Push Rod Clamp 513, Black Oxide Finish, 0.36 kg, M8x50 Spindle – Kukamet
Benefit from a compact, high‑force clamp with a corrosion‑resistant blackened finish and an adjustable M8×50 pressure spindle for secure, space‑saving fixtures; order the push‑rod clamp directly via Metav Werkzeuge or consult our specialists for application advice. B513-3 Kukamet push‑rod clamp — 2,640 N holding force, M8×50 spindle The B513-3 push‑rod clamp is a compact clamping element for workshop and light industrial fixturing, developed to provide reliable workpiece retention where a low profile and adjustable pressure are required. 2,640 N maximum holding force Blackened, corrosion-resistant finish M8×50 adjustable pressure spindle Lightweight — 0.36 kg compact design Secure clamping performance for repetitive fixtures The clamp delivers a holding force of 2,640 N and a maximum pressure capacity of 2,500 N, values that translate into consistently secure retention for a range of small to medium components. These numerical indicators describe the mechanical limits: the holding force specifies the lateral retention capacity under load, while the pressure force refers to the axial contact pressure exerted by the spindle. For jigs and fixtures where repeatability matters, this combination reduces rework and cycle interruptions and supports stable machining and assembly routines. Robust finish and easy adjustment for long service life The body is treated with a blackened finish, providing improved corrosion resistance and reduced surface glare in workshop environments. The M8×50 pressure spindle enables fine adjustment of contact pressure and compensates for workpiece variation without additional tools. The absence of a mounting foot (delivered without base) allows direct integration into existing fixture plates or welded brackets, supporting compact layouts and reducing interference with adjacent components. Compact, lightweight design that simplifies integration With a mass of 0.36 kg, the clamp is notably lightweight, favouring applications where low inertia is beneficial and where multiple clamps are used across a fixture. The compact profile makes the component suitable for confined spaces or stacked assemblies. Designed as a basic mechanical clamping element within the clamping technology portfolio, the unit functions as a reliable, low‑maintenance option for production jigs and manual workstations, supporting efficient workflow and predictable results. For robust, space‑saving clamping choose the Kukamet B513-3 push‑rod clamp — contact Metav Werkzeuge for specification advice and dependable delivery from Emmerich. Technical data SKU: B513-3 GTIN: 8680731508758 Model: 513 Category: Spanner Manufacturer: Kukamet Facts Weight: 0.36 kg Maximum holding force: 2,640 N Maximum pressure force: 2,500 N Pressure spindle: M8×50 eCl@ss: 21041716 ETIM: EC011973 Special features Material/finish: blackened (black oxide) Delivered without base Compact, lightweight construction Suitable for workshop and light industrial fixtures FAQ What workpieces is this clamp suitable for? The B513-3 push‑rod clamp from Kukamet is intended for small to medium workpieces in jigs and fixtures where a compact, repeatable clamping action is required. How is the contact pressure adjusted? Adjustment is performed via the M8×50 pressure spindle, which allows fine control of the axial contact pressure to suit varying workpiece heights. Can the clamp be mounted to a fixture plate? Yes; the unit is supplied without base, enabling direct integration into fixture plates or custom brackets for space‑saving installation. What does the blackened finish provide? The blackened finish offers enhanced corrosion resistance and reduced surface reflection, extending service life in typical workshop environments. What are the key performance figures to check for fixture design? Designers should consider the 2,640 N holding force and 2,500 N pressure capacity as the primary mechanical values when selecting the clamp for specific applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20,000N Horizontal Clamp With Safety Lock, 65mm Thread Length, Blackened Cast Body - Kukamet
Take advantage of the high holding force and secure locking for reliable fixture clamping; the combination of a horizontal mounting base and robust cast construction ensures repeatable results and long service life. Order the latch clamp directly via Metav Werkzeuge or contact our consultants for technical advice. 341-5-L latching toggle clamp – horizontal base, safety lock (Kukamet) 341-5-L is a latching toggle clamp built for stable horizontal mounting and secure retention in production jigs and fixtures Horizontal base for stable mounting Safety lock prevents accidental release Holding force up to 25,000 N Robust cast body with blackened finish Reliable retention under heavy loads The clamp delivers a holding force of up to 25,000 N and a maximum pressing force of 20,000 N, providing measurable safety margins for demanding holding tasks. The high retention values are particularly useful in machining, welding or assembly fixtures where repeatable clamping pressure reduces rework. The numerical performance figures simplify process planning and allow clear comparison with alternative clamping solutions, supporting efficient decision-making in production environments. Solid mounting and corrosion-resistant finish Fitted with a horizontal base, the unit is suited to bench-top or fixture-mounted applications where lateral stability matters. The cast body with a blackened finish provides mechanical robustness and improved surface protection compared with lightweight stamped alternatives. At approximately 2.235 kg, the clamp combines mass for vibration damping with a compact footprint, helping maintain positional accuracy in repetitive production cycles and prolonging service life under industrial conditions. Fast engagement, precise adjustment The lever-operated toggle mechanism ensures swift engagement and reliable locking, while the thread length 65 mm on the adjustable element enables fine tuning of clamp height and grip point. The integrated hook and the safety lock afford both quick loading and secure retention: the hook speeds set-up and the safety device prevents unintended opening during handling or vibration. These features reduce cycle times and contribute directly to safer, more efficient workflows on the shop floor. Practical integration and supplier reliability Designed for industrial use, the clamp aligns with standard fixture layouts and can be incorporated into modular tooling systems. The clear technical parameters aid integration into quality plans and process documentation. Metav’s supply model adds an operational advantage: centralised distribution from Emmerich acts as a quality filter for European customers, while a broad product range supports consolidated sourcing and reliable replenishment. The result is a pragmatic balance of performance, availability and traceable quality. For robust, repeatable clamping with a proven safety lock, request the Kukamet 341-5-L from Metav Werkzeuge for purchasing and specification support – call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article / model: 341-5-L GTIN: 8680731504750 SKU: 341-5-L Weight: 2.235 kg Core data Max pressing force: 20,000 N Max holding force: 25,000 N Thread length: 65 mm Mounting type: horizontal base Special features Safety lock included With hook for quick engagement Blackened finish with cast body Category: latching toggle clamp FAQ What is the maximum holding force of this clamp? The 341-5-L offers a maximum holding force of 25,000 N, specified for secure retention in fixture applications. Can the clamp be adjusted for different workpiece heights? Yes, the adjustable element features a thread length of 65 mm, allowing precise setting of the clamp point for variable workpiece sizes. Is the clamp suitable for use in welding fixtures? The robust cast body and blackened finish make the clamp suitable for welding and assembly fixtures where mechanical strength and surface protection are required. How does the safety lock work on the latch clamp? The integrated safety lock prevents accidental release of the lever once engaged, ensuring the clamp remains closed under vibration or incidental contact. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20.5mm Extension Lever For Clamping Arms, Metal – Kukamet
Take advantage of the combination of robust metal construction, compact cross-section and extended reach for reliable clamping performance in production and workshop settings. Order the extension lever directly via Metav Werkzeuge or consult our specialists for specification support. Extension Lever 220 – Metal extension for toggle clamps, 207 mm (Kukamet) A Extension Lever 220 engineered as an extension for toggle and lever clamps, providing increased reach and a slim profile for tight fixture layouts. Metal construction for high durability 207 mm length for extended reach Slim 20.5 x 8 mm cross-section Lightweight 0.235 kg for easy handling Improved machine uptime through reliable clamping geometry The metal construction and precisely formed profile deliver a durable extension that maintains repeatable clamping geometry under frequent use. Where fixture access is limited, the extended 207 mm length gives a measurable reach advantage, enabling faster set-ups and fewer temporary workarounds. The result is a more efficient workflow and fewer interruptions to production processes, supported by the component’s stable dimensions and predictable behaviour during repeated clamping cycles. Easier integration into existing clamping systems and fixtures With a slim 20.5 x 8 mm cross-section and modest mass of 0.235 kg, the lever integrates smoothly into compact fixtures while reducing inertia during actuation. The elongated form factor reduces the need to redesign neighbouring components and can be used as a direct extension for many lever-style clamps. For procurement and traceability, the part is listed under SKU: 220-4-06-C1 and carries the GTIN: 4061905079511, simplifying stock management and replacement planning. Dependable sourcing, workshop-ready quality and practical benefits Produced by Kukamet, this extension lever offers a straightforward, workshop-oriented solution for extending lever reach without compromising stiffness or serviceability. Sourced and distributed through Metav Werkzeuge’s European supply network, customers benefit from consistent availability and clear product identification. The compact dimensions and robust metal build support a wide range of clamping tasks, helping to standardise spare parts and reduce the variety of bespoke adapters needed in daily operations. Contact Metav Werkzeuge for procurement details or technical advice on integrating the Kukamet Extension Lever 220 into existing clamping systems; assistance is available from our Emmerich location. Technical data Article number: 220-4-06-C1 GTIN: 4061905079511 Manufacturer: Kukamet Dimensions / Core data Height: 207 mm Width: 20.5 mm Thickness: 8 mm Weight: 0.235 kg Features / Applications Material: Metal Application: Extension for lever / toggle clamps Category: Spanner FAQ What materials is the extension lever made from? The extension lever is made from metal, providing the stiffness required for repeated clamping operations. Will this lever fit existing toggle clamps? The lever is intended as an extension for lever and toggle clamps; compatibility should be checked against the clamp’s mounting arrangement using SKU 220-4-06-C1 as a reference. How much additional reach does the extension provide? The component adds an extended reach of 207 mm, suitable for fixtures where extra clearance is required. How heavy is the lever and does it affect actuation? The lever weighs 0.235 kg, a low mass that minimises added inertia and supports responsive clamp actuation. How can this part be identified for ordering or stock control? Order and trace using SKU: 220-4-06-C1 or GTIN: 4061905079511 to ensure correct replacement parts are supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Andruckspindel M8x50, Waagerechter Fuß, Schwarz brüniert, 0,415 kg, Keine Besonderheit - Kukamet
Der Vertikalspanner 211 überzeugt durch die Kombination aus hoher Druckkraft und kompakter Bauweise; die Haltekraft von 2500 N sorgt für sichere Fixierung bei Montage- und Prüfaufgaben. Bestellungen und fachliche Beratung erfolgen direkt über Metav, Ihr Präzisions-Partner mit Lager und Qualitätsfilter in Emmerich. Vertikalspanner 211 von Kukamet Der Vertikalspanner 211 ist ein kompakter Hebelspanner für präzise Spannvorgänge in Werkstatt und Produktion Waagerechter Fuß für stabile Montage Druckkraft bis 2000 N Haltekraft bis 2500 N Andruckspindel M8x50 Oberfläche schwarz brüniert Kompakte Bauweise für punktgenaue Spannungen Der Vertikalspanner bietet eine platzsparende Konstruktion, die sich besonders für enge Vorrichtungen eignet. Mit einer Druckkraft von 2000 N lassen sich Werkstücke zuverlässig vorschieben, während die Haltekraft von 2500 N dauerhaft Fixierung gewährleistet. Diese Kennwerte ermöglichen wiederholbare Spannzyklen und reduzieren Ausschuss durch verrutschende Bauteile. Robuste Oberfläche reduziert Wartungsaufwand Die Oberfläche ist schwarz brüniert, was Korrosionsschutz und eine gleichmäßige Optik kombiniert. Das geringe Gewicht von 0,415 kg macht den Spanner handlich und erleichtert den Einsatz in mobilen Vorrichtungen. Dadurch sinkt die Notwendigkeit für häufige Nachbearbeitung und die Lebensdauer der Spannlösung erhöht sich merklich. Einfache Montage dank durchdachter Befestigung Die Befestigung erfolgt über den waagerechten Fuß, der eine stabile Auflage auf Vorrichtungsplatten ermöglicht. Die Andruckspindel M8x50 erlaubt feine Justage und schnellen Wechsel der Spannkraft. Diese Ausführung reduziert Montagezeit und vereinfacht die Integration in Prüfvorrichtungen oder Serienarbeitsplätzen. Vielseitiger Einsatz für Handwerk und Industrie Die Konstruktion eignet sich für Produktionslinien, Montagearbeitsplätze und Feinmechanik-Werkstätten. Anwender profitieren von der robusten Bauweise und einfachen Handhabung bei wiederkehrenden Spannvorgängen. Als kompakte Spannlösung ist das Produkt besonders dort sinnvoll, wo Wiederholgenauigkeit und Platzersparnis gefragt sind. Empfehlung: Für präzise Spannaufgaben empfiehlt Metav den Vertikalspanner 211 von Kukamet als zuverlässige und kompakte Lösung; Bestellungen und technische Rückfragen per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: B211-3 Marke: Kukamet Bezeichnung: Vertikalspanner 211 eClass: 21041717 ETIM: EC011973 Fakten Druckkraft max: 2000 N Haltekraft max: 2500 N Gewicht: 0,415 kg Besonderheiten Befestigungsart: waagerechter Fuß Andruckspindel: M8x50 Material: Schwarz brüniert Besonderheit: Keine Hebelspanner FAQ Wie hoch ist die maximale Druckkraft und was bedeutet das für den Einsatz? Die maximale Druckkraft von 2000 N beim Vertikalspanner 211 von Kukamet (Artikelnummer B211-3) erlaubt das sichere Vorschieben von Bauteilen in Vorrichtungen und sorgt für wiederholbare Positioniergenauigkeit in Montage- und Prüfprozessen. Ist der Spanner für korrosive Umgebungen geeignet? Der Vertikalspanner 211 besitzt eine schwarz brünierte Oberfläche, die erhöhten Korrosionsschutz bietet. Für stark aggressive Umgebungen sollten zusätzliche Schutzmaßnahmen geprüft werden. Welche Befestigungsart ist vorgesehen und wie wird montiert? Der Spanner verfügt über einen waagerechten Fuß zur stabilen Montage auf Vorrichtungsplatten. Die Andruckspindel M8x50 ermöglicht Feineinstellung und schnelle Fixierung beim Einbau. Für welche Anwendergruppen ist der Spanner besonders geeignet? Der Vertikalspanner 211 von Kukamet richtet sich an Werkstätten, Industrieanwender und den Fachhandel, die platzsparende und belastbare Spannlösungen für Serien- oder Einzelanwendungen benötigen.
2000 N Closure Clamp Vertical Base With Hook, 41mm Thread Length, 0.325kg - Kukamet
The combination of 2,500 N holding force, a compact lever-operated hook, and vertical-foot mounting delivers dependable retention for repetitive fixture work; procure the clamp via Metav Werkzeuge or consult the team for specification advice. Locking clamp 412 by Kukamet — vertical-foot lever clamp with hook and high holding force Locking clamp 412 is a lever-operated locking clamp for fixture and bench use, combining a hook-equipped latch with vertical-foot mounting to secure parts reliably in repetitive assembly or welding applications. Lever-operated locking clamp, hook-equipped Vertical-foot mounting for bench or fixture Holding force 2,500 N for secure retention Blackened finish for wear resistance Secure retention for repetitive clamping The lever design provides rapid engagement and repeatable clamping with clear numerical performance: a holding force of 2,500 N and a maximum clamping force of 2,000 N. These figures translate into reliable part retention during machining, welding or assembly, reducing rework and cycle interruptions. The mechanical over-centre action ensures the workpiece is held with consistent force, making the clamp particularly suitable for production jigs where reproducibility is a priority. Specification-driven performance supports planning for fixture loads and safety margins. Robust construction for workshop and fixture use Built with a blackened finish for improved surface wear resistance and a compact mass of 0.325 kg, the component offers a durable balance between strength and low weight. The vertical-foot mounting enables straightforward installation onto plates or tooling blocks, while the included hook provides a positive engagement point for latches or mating fixtures. The nominal thread length of 41 mm allows depth adjustment when integrating the clamp into pre-drilled fixtures. The combination of durable surface treatment and precise mechanical geometry reduces maintenance intervals and supports long-term reliability in demanding shop environments. Fast handling and straightforward integration The lever-action mechanism and hook-equipped latch permit quick part loading and unclamping, improving throughput where frequent operations occur. The compact footprint and vertical-foot base mean the unit is compatible with tight fixture layouts and can be positioned close to machining or welding zones without impeding access. Simple mechanical operation eliminates the need for auxiliary power, while the clear load ratings simplify selection for specific tasks. For project planning, the clamp’s measured forces and dimensional attributes aid in designing secure, space-efficient fixtures. Contact Metav Werkzeuge for specification support or to request delivery options for the Kukamet locking clamp 412; technical consultants at Metav Werkzeuge can advise on integration into production jigs and fixture layouts. Technical Data Article number: B412-3 GTIN: 8680731508642 Brand: Kukamet eClass: 21041718 ETIM: EC011973 Numbers / Core technical data Max clamping force: 2,000 N Max holding force: 2,500 N Weight: 0.325 kg Thread length: 41 mm Designs / Special features Vertical-foot mounting Hook-equipped latch Material / Finish: blackened finish Category: Clamps Asset: catalogue page PDF available FAQ What is the difference between clamping force and holding force? The clamping force (2,000 N) is the applied force when the lever is engaged; the holding force (2,500 N) is the maximum retention the latch provides under shear or pull. The Kukamet locking clamp 412 specifies both values for fixture design. How is the clamp mounted to a jig or bench? Mounting is by the vertical-foot base. The vertical-foot arrangement on the locking clamp 412 enables secure bolting to plates or fixture blocks. Does this model include a hook for latching? Yes. The unit is hook-equipped, providing a positive engagement point for latches and mating fixtures on the Kukamet clamp 412. What dimensions affect installation depth? The thread length of 41 mm determines the installation depth and adjustment range; this should be considered when planning bolting and clearances for the clamp in fixtures. Is the finish suitable for workshop environments? The blackened finish on this locking clamp offers enhanced surface wear resistance and helps protect against mild corrosion in typical workshop conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com