Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
2000 N Druckkraft, Silikonbeschichteter Griff, waagerechter Fuß, 40mm Gewindelänge, mit Haken, 0,24kg - Kukamet
Der robuste Einsatz des Verschlussspanners überzeugt durch die Kombination aus Edelstahl-Konstruktion, hoher Haltekraft und dem silikonbeschichteten Griff für rutschfesten Halt; bestellen Sie den Verschlussspanner direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Verschlussspanner Kukamet 361 Der Verschlussspanner ist ein robuster Hebelspanner aus Edelstahl zur sicheren Fixierung von Werkstücken in Werkstatt und Produktion. Edelstahlbauweise, langlebig und rostarm Haltekraft 2.500 N für sicheres Fixieren Druckkraft 2.000 N für kraftvolles Spannen silikonbeschichteter Griff für ergonomischen Halt waagerechter Fuß mit Haken zur schnellen Montage Robuste Konstruktion für dauerhaften Werkstatteinsatz Die solide Edelstahl-Ausführung sorgt für Beständigkeit gegen Korrosion und reduziert Wartungsaufwand. Durch die kompakte Bauform bleibt die Handhabung einfach, während die Konstruktion gleichzeitig eine hohe Lebensdauer ermöglicht. Das geringe Gewicht unterstützt die flexible Nutzung an verschiedenen Spannplätzen ohne unnötige Belastung. Leistung klar erklärt: Haltekraft und Druckkraft in der Praxis Die technische Unterscheidung zwischen Druckkraft und Haltekraft entscheidet über passende Anwendungen: Die Druckkraft von 2.000 N beschreibt die Kraft, die beim Schließen aufgebracht wird, während die Haltekraft von 2.500 N angibt, welche Kraft das gespannte Werkstück dauerhaft hält. Diese Kennwerte erleichtern die Auswahl für Anwendungen mit mittlerer bis hoher Spannanforderung und sorgen für reproduzierbare Spannresultate. Ergonomie und Montagekomfort für den Werkstattalltag Der silikonbeschichtete Griff bietet sicheren Halt auch bei öligen oder feuchten Händen und reduziert Ermüdungserscheinungen bei wiederholter Nutzung. Die Befestigungsart mit waagerechtem Fuß und integriertem Haken ermöglicht eine schnelle Montage an Standardaufspannungen und vereinfacht den Wechsel zwischen Werkstücken ohne zusätzlichen Werkzeugaufwand. Einsatzfelder und Zielgruppe: wo dieses Werkzeug glänzt Der Spanner ist ausgelegt für Anwender in Handwerk und Leichtindustrie, die eine kompakte, zuverlässige Spannlösung benötigen. Besonders geeignet ist das Produkt für Montagearbeiten, Vorrichtungsbau und wiederkehrende Fixieraufgaben, bei denen Robustheit und einfache Bedienung im Vordergrund stehen. Fachbetriebe profitieren von der klaren Leistungsangabe und der langlebigen Materialwahl. Empfehlung: Für sichere Fixierung in Werkstatt und Produktion empfiehlt Metav Werkzeuge die Nutzung des Kukamet Verschlussspanners 361; bei offenen Fragen erreichen Sie unsere Technikberatung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: S361-3-K Marke: Kukamet Bezeichnung: Verschlussspanner 361 Daten Druckkraft Max: 2000 N Haltekraft Max: 2500 N Gewindelänge: 40 mm Gewicht: 0,24 kg Besonderheiten Material: Edelstahl Befestigungsart: waagerechter Fuß Mit Haken silikonbeschichteter Griff Hebelspanner (Einsatztyp) eClass: 21041718 (Produktklassifikation) ETIM: EC011973 (Technische Klassifikation) FAQ Wie hoch ist die maximale Haltekraft des Verschlussspanners? Die maximale Haltekraft des Verschlussspanners von Kukamet beträgt 2.500 N und eignet sich für mittlere bis hohe Spannanforderungen in Werkstatt und Produktion; nutzen Sie diese Angabe zur Auswahl passender Spannvorrichtungen. Welches Material hat der Spanner und welche Vorteile bietet es? Der Kukamet Verschlussspanner ist aus Edelstahl gefertigt, was Korrosionsbeständigkeit und Langlebigkeit gewährleistet und somit Wartungsintervalle reduziert. Ist der Griff für den Dauereinsatz geeignet? Ja, der silikonbeschichtete Griff des Verschlussspanners bietet rutschfesten Halt und erhöht den Bedienkomfort bei wiederholten Spannvorgängen. Wie befestige ich den Spanner an Prüf- oder Spannsystemen? Der Spanner verfügt über einen waagerechten Fuß und einen Haken zur einfachen Montage an Standardaufspannungen; die Gewindelänge beträgt 40 mm und erleichtert die Integration. Wofür eignet sich die Druckkraftangabe von 2.000 N? Die Druckkraft von 2.000 N beschreibt die beim Schließen erreichte Kraft und ist relevant bei Anwendungen, bei denen ein kräftiges Andrücken erforderlich ist, etwa beim Fixieren schwererer Werkstücke.
2000 N Horizontal Base Combination Clamp, Zinc-Plated, 0.8 kg - Kukamet
Take advantage of a robust, galvanised construction combined with a reliable 2,000 N clamping and holding capacity to keep fixtures secure and setups consistent; order the clamp directly via Metav Werkzeuge or consult our team for specification support. Combination clamp 712 — Kukamet with galvanised finish and 2,000 N capacity A Kukamet combination clamp designed for fixed-mount applications that provides dependable lever-action clamping with a horizontal base for stable installation Combination lever clamp for versatile securing 2,000 N clamping and holding force Galvanised finish for corrosion resistance Horizontal base for fixed mounting Dependable clamping power for repetitive work The combination clamp delivers a rated 2,000 N of clamping and holding capacity, ensuring consistent force across repetitive cycles. Such a defined force rating supports predictable part retention in jig and fixture environments, improving process stability and reducing rework. By specifying a clamp with this level of performance, production planning benefits from a predictable clamping behaviour and reduced variability during machining or assembly operations. The lever mechanism provides quick actuation for repeat tasks, offering quick clamping without sacrificing holding force, which is essential for stable, accurate manufacturing sequences. Designed for workshop environments and simple installation Constructed with a galvanised finish, the clamp resists corrosion in workshop conditions and maintains appearance and functionality over time. The horizontal base mounting allows secure attachment to tables, jigs or subplates, keeping the fixture low and unobtrusive while delivering a stable anchoring point. At approximately 0.8 kg, the component is lightweight enough for easy handling during fixture assembly yet substantial enough to offer reliable operation. This combination of robust surface protection and compact mass minimises downtime during installation and supports long-term availability in demanding production settings. Efficient operation through proven lever mechanics The lever-operated design converts manual input into consistent clamping force with a clear mechanical advantage, enabling rapid part securing and release. The term "combination" in this context refers to the clamp’s adaptable use in both clamping and locating roles within a fixture layout. For users unfamiliar with clamping terminology: clamping force denotes the active compressive force applied to a workpiece, while holding force refers to the maximum load the clamp can resist without releasing. The simple mechanical layout reduces maintenance points, and the familiar lever action supports quick operator training, increasing throughput where frequent part changes are required. Where this clamp proves most valuable The 712 model is particularly suitable for fixed jigs, assembly benches and production fixtures where a compact, durable clamp with repeatable force is needed. Its mounting style and corrosion-resistant finish suit environments where equipment is permanently installed or subject to regular cleaning. Integrators will find the clamp straightforward to incorporate into bespoke fixtures or standardised tooling setups, improving cycle times through rapid actuation and dependable component retention. The unit’s compact footprint also helps keep tooling profiles low, aiding accessibility during downstream operations. For reliable supply and specification support, consult Metav Werkzeuge to source the Kukamet combination clamp 712 and to discuss fixture integration or ordering details — contact via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number / SKU: 712-2 GTIN: 8680731504316 Manufacturer: Kukamet Facts Maximum clamping force: 2,000 N Maximum holding force: 2,000 N Weight: 0.8 kg ECLASS: 21021004 ETIM: EC011973 Special features Material: galvanised Mounting: horizontal base Type: combination / lever clamp Category: clamps FAQ What load can the combination clamp 712 safely hold? The combination clamp 712 is rated for a maximum clamping and holding capacity of 2,000 N, which defines its safe working range for securing parts in fixtures. How is the clamp mounted in a fixture? The unit uses a horizontal base for fixed mounting; this format enables secure attachment to tables, jigs or subplates for stable operation. What surface protection does the clamp have? The clamp is supplied with a galvanised finish, offering corrosion resistance suitable for workshop and industrial environments. Is the lever action suitable for frequent use? Yes, the lever-operated mechanism is designed for rapid actuation and repetitive cycles, reducing operator effort while maintaining consistent clamping performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Pneumatic Clamp Horizontal Base Zinc-Plated, 2000 N Holding Force - Kukamet
The compact, zinc-plated pneumatic clamp combines reliable 2000 N clamping performance with a horizontal-foot mounting for straightforward fixture integration; its light weight and pneumatic actuation ensure fast, repeatable cycles across assembly and machining jigs. Order the Pneumatic clamp 691 directly via Metav Werkzeuge or consult our advisors for specification matching. Pneumatic clamp 691 by Kukamet — 2000 N, zinc-plated pneumatic clamp The Pneumatic clamp 691 is an air-operated clamping device for fixtures and jigs, built for horizontal-foot mounting in light industrial and workshop environments. 2000 N clamping force Pneumatic actuation for fast cycles Horizontal-foot mounting Zinc-plated corrosion resistance Consistent, measurable clamping for production use Designed for reliable repeatability, this pneumatic clamp delivers a 2000 N maximum clamping and holding force that supports dependable workpiece fixation during machining and assembly. The air-driven mechanism provides consistent actuation stroke and clamping pressure, reducing variation between cycles; this measurable performance helps to maintain process quality and lowers scrap rates. The combination of pneumatic actuation and a clearly stated holding force provides a practical, verifiable basis for fixture planning and process documentation. Straightforward installation with horizontal-foot mounting A horizontal-foot mounting simplifies attachment to plates and fixtures, enabling fast integration into existing jigs or custom tooling. The horizontal-foot mounting reduces the need for special brackets and aligns the clamp body close to the work surface, improving access and tool clearance. The zinc-plated finish protects the clamp body against corrosion in workshop atmospheres, offering durability without specialised maintenance, which supports longer service intervals and predictable uptime. Lightweight build that improves handling and cycle dynamics At just 1.173 kg, the clamp’s compact construction reduces the inertial load on moving fixtures and eases handling during assembly or retrofitting. The lower mass contributes to quicker acceleration and deceleration of clamped assemblies, supporting faster cycle times where pneumatic systems are used. The compact footprint and moderate weight also make the device suitable for smaller fixtures where space and balance are critical design considerations. Robust choice for workshops and small-scale production Built as a practical clamping solution, the device suits repair shops, small production cells and tooling benches where repeatable pneumatic fixation is required. The solid zinc-plated body and standardised mounting mean it integrates well with modular fixturing and mechanical stop systems. For applications demanding predictable clamping forces and straightforward installation, this clamp offers a balance of durability, measurable performance and ease of use that supports process reliability. Contact Metav Werkzeuge to discuss the Kukamet Pneumatic clamp 691 for reliable 2000 N clamping and efficient fixture integration Technical data Article number: 691-2 GTIN: 8680731504972 Manufacturer: Kukamet eClass: 21021004 ETIM: EC011973 Core specifications Clamping force max: 2000 N Holding force max: 2000 N Weight: 1.173 kg SKU: 691-2 Features and materials Material: zinc-plated Mounting: horizontal foot Actuation: pneumatic clamp Category: Spanner FAQ What is the maximum clamping force of the clamp? The Pneumatic clamp 691 provides a maximum clamping and holding force of 2000 N, specified for consistent fixation in typical workshop tasks. How is the clamp mounted to a fixture? Mounting is via a horizontal foot, enabling the clamp to be fastened directly to plates and modular fixture components for compact integration. What finish protects the clamp from corrosion? The clamp is zinc-plated, offering corrosion resistance suitable for standard workshop environments without special treatment. Is the clamp suitable for retrofit into existing jigs? Yes, the compact weight of 1.173 kg and horizontal-foot mounting make the clamp well suited to retrofitting into existing fixtures and jigs. Who supplies this product and where can further technical details be obtained? Kukamet supplies the pneumatic clamp 691; for additional technical detail, Metav Werkzeuge can provide specification matching and advice. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Toggle Clamp Horizontal Base With Hook, Stainless Steel 41mm Thread Length - Kukamet
Take advantage of stainless-steel durability, a compact 0.325 kg body and proven clamping forces for secure, repeatable fixture work; order the latch directly via Metav Werkzeuge or ask our consultants for application advice. Toggle latch clamp 411 (S411-3) — Stainless steel, hook version by Kukamet The Toggle latch clamp 411 is a compact closure clamp designed for secure fastening and repeatable holding in assembly, jig and fixture applications, featuring a horizontal mounting foot and integrated hook. Stainless steel construction Horizontal base for simple mounting Holding force up to 2,500 N Integrated hook for secure engagement Consistent holding for reliable production The clamp delivers a defined holding force of 2,500 N and a closing force of 2,000 N, ensuring components remain fixed throughout machining or assembly operations. The mechanism translates manual lever movement into a high clamping force, which reduces cycle-time losses caused by readjustment. Because the clamp is made of stainless steel, it sustains repeated use in workshop environments and resists corrosion, providing a predictable service life that supports consistent production throughput. Fast installation and space-efficient mounting A horizontal mounting foot allows the clamp to be fixed close to the workpiece on flat surfaces, saving space on fixtures and simplifying layout. The compact mass of 0.325 kg and the 41 mm thread length enable quick fitting and straightforward alignment in tight assemblies. The integrated hook provides a secure engagement point that prevents accidental release under vibration, so fixtures remain set without extra locking steps — an efficient choice for jigs where accessibility and compactness matter. Durable materials and straightforward function Constructed from stainless steel, the latch offers enhanced resistance to wear and environmental influences compared with untreated alternatives. The simple lever action requires minimal maintenance and can be inspected visually during routine checks. The robust build and proven toggle principle translate into low downtime and reliable clamping behaviour, which supports process stability and reduces the risk of workpiece movement during subsequent operations. Suitable uses and handling advice Typical applications include small fixtures, transport closures and production jigs where a compact yet powerful clamp is required. The device’s geometry and hook make it suited to repeatable manual operation and medium-duty automated handling. For projects requiring traceable components, the SKU S411-3 and GTIN allow clear identification within inventory systems and assembly documentation. Contact Metav Werkzeuge today for specification matching or to discuss how the S411-3 can be integrated into existing fixtures; email info@metav-werkzeuge.com or call +49 2822 7131930 to consult our specialists Technical data Article number: S411-3 GTIN: 8680731504156 ECLASS: 21041718 ETIM: EC011973 Manufacturer: Kukamet Facts Closing force (max): 2,000 N Holding force (max): 2,500 N Thread length: 41 mm Weight: 0.325 kg Special features Material: stainless steel Mounting type: horizontal foot With hook (integrated) Category: clamp (toggle latch) FAQ What clamping forces does the latch provide? The latch offers a closing force of 2,000 N and a holding force of 2,500 N, giving secure retention for medium-duty fixtures with the S411-3. Is the clamp suitable for corrosive or humid environments? Made from stainless steel, the toggle latch is suitable for environments where corrosion resistance is required, supporting longer service life. How is the latch mounted to a fixture? The clamp is fitted via a horizontal mounting foot and a 41 mm thread length, enabling straightforward installation on flat surfaces. Can this latch be used for transport closures and jigs? Yes. The integrated hook and robust holding capacity make it appropriate for transport closures, jigs and repeated manual engagement. How can the product be identified in inventory systems? The item is supplied as SKU S411-3 and GTIN 8680731504156 for clear identification and traceability across documentation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Toggle Clamp Horizontal Base, Silicone-Coated Handle, 40mm Thread Length, Zinc-Plated, With Hook - Kukamet
Take advantage of the combination of secure holding force and ergonomic operation for consistent, repeatable clamping in assembly and fixture applications. Order the clamp directly via Metav Werkzeuge or consult the Metav team for configuration and application advice. Toggle Latch Clamp 361-3-K — horizontal-base toggle latch with silicone-coated handle (Kukamet) The Toggle Latch Clamp 361-3-K is a heavy-duty closure clamp designed for horizontal-base mounting, combining a silicone-coated handle with a hooked latch for fast and secure fastening in workshops and light industry. Horizontal base for stable mounting Silicone-coated ergonomic handle Holding force up to 2,500 N Zinc-plated corrosion resistance Secure, measurable clamping for production processes The 361-3-K delivers clearly defined clamping values that support process reliability: a holding force of 2,500 N and a pressing force of 2,000 N, which helps to minimise slippage and rework in repetitive operations. These quantifiable figures make it straightforward to specify the clamp in jigs and fixtures, allowing planners to calculate loads and safety margins precisely. The relatively low mass of the device also reduces dynamic load on moving assemblies while maintaining consistent performance. Ergonomic design that reduces fatigue and resists wear Ergonomics and longevity are combined in the silicone-coated handle, which improves grip and dampens vibration during repeated operation, while the zinc-plated steel construction offers durable corrosion resistance in typical workshop environments. The hooked latch provides positive engagement and prevents accidental release, which reduces the likelihood of production interruptions. Maintenance is straightforward: the robust finish limits corrosion-related service, and replacement of wear items is simplified by the clamp’s conventional geometry. Fast fitting and flexible use across fixtures The horizontal-base mounting allows quick installation to flat plates or assembly frames, and the integrated hook supports a variety of latch points for adaptable fixturing. The clamp’s thread length 40 mm enables fine adjustment of engagement depth, so alignment tolerances can be compensated without additional shims. Where compact, repeatable closure is required, this toggle latch is a practical solution for small-batch production, inspection fixtures and repetitive assembly operations. For specification checks or application matching, Metav’s technical advisers can provide further data and recommendations. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 361-3-K into existing fixtures — Metav’s team in Emmerich can advise on mounting options and compatibility with specific applications Technical Data SKU: 361-3-K GTIN: 8680731509991 E-class: 21041718 ETIM: EC011973 Facts Weight: 0.24 kg Max pressing force: 2,000 N Max holding force: 2,500 N Thread length: 40 mm Special features Horizontal base (waagerechter Fuß) Silicone-coated handle Zinc-plated finish Hooked latch included FAQ What materials can this toggle latch be used with? The Kukamet Toggle Latch Clamp 361-3-K is suitable for attachment to metal fixtures and mounting plates; its zinc-plated finish provides corrosion resistance appropriate for steel and aluminium assemblies. How is the clamp mounted to a fixture? Mounting is via the horizontal base; the clamp is designed for fastening to flat surfaces and can be secured with standard fasteners sized to the base holes. What does the holding force specification mean in practice? A rated holding force of 2,500 N indicates the maximum static retention capacity under ideal conditions; the 361-3-K therefore provides robust retention for many light-to-medium assembly tasks. Is the latch adjustable for different engagement lengths? Yes, the clamp features a threaded engagement with a thread length of 40 mm, allowing adjustment of the hook position and engagement depth to suit varying latch points. Does the handle coating improve operator comfort? The silicone-coated handle reduces hand fatigue and provides a secure grip during frequent actuation, making the clamp suitable for repetitive manual use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Toggle Clamp U-Base With Hook, 2500 N Holding Force, 41 mm Thread Length - Kukamet
Compact, secure clamping with measurable performance: the locking mechanism delivers a clamping force of 2,000 N and a holding force of 2,500 N, ensuring repeatable fixturing in small assemblies and jigs. The U-base mounting and hook attachment provide stable installation and quick repositioning — order the clamp directly via Metav Werkzeuge or consult the Metav team for application advice. Locking toggle clamp 413 — Compact lever clamp with U-base by Kukamet Locking toggle clamp 413 is a compact lever clamp designed for repetitive fixture work and secure closure in jigs, fixtures and small assembly applications. U-base mounting for stable installation Clamping force up to 2,000 N Holding force up to 2,500 N Blackened finish for low-reflective surface Secure, measurable clamping for repeatable production The clamp provides a precise clamping force that supports consistent machining and assembly cycles. With a rated clamping force of 2,000 N and an independently rated holding force of 2,500 N, the device separates operational pressure from static retention to reduce slippage and rework. The compact lever design reduces operator effort while maintaining a reliable closure; this makes the clamp particularly suitable where space is limited but repeatability is essential. Technical data sheets are available for further validation. Stable installation and flexible attachment options A U-base fastening delivers a robust anchoring point for bench or fixture mounting, while the integrated hook enables quick engagement with mating parts. The clamp features a thread length of 41 mm, permitting straightforward height adjustment and alignment in bespoke fixtures. At 0.285 kg the unit is light enough for manual positioning yet solid in operation. The blackened finish reduces surface reflection in visual inspection setups and offers basic protection against handling wear. Applications, durability and maintenance Designed for workshop and light industrial use, the lever clamp excels in jigs, holding fixtures and repeat assembly tasks where secure closure and fast cycle times matter. The simple mechanical construction limits maintenance to routine inspection and lubrication of the pivot points; replacement or adjustment of the threaded spindle restores clamping position without special tooling. For application-specific guidance or additional technical data, Metav Werkzeuge can supply drawings and compatibility advice to support integration into existing production processes. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet locking toggle clamp 413 into production setups and to request technical drawings or order information. Technical Data SKU: B413-3 GTIN: 8680731508666 ECLASS: 21041718 ETIM: EC011973 Model: 413 Facts Weight: 0.285 kg Maximum clamping force: 2,000 N Maximum holding force: 2,500 N Thread length: 41 mm Mounting: U-base Special features Material / finish: blackened finish With hook attachment Category: clamp / spanner Story trigger: lever clamp Manufacturer: Kukamet FAQ What clamping and holding forces does this clamp provide? The Kukamet locking toggle clamp 413 offers a clamping force of 2,000 N and a holding force of 2,500 N (SKU B413-3). How is the clamp mounted? Mounting is via a U-base, allowing secure installation on benches or fixtures; the clamp also features a hook for quick engagement. What is the thread length for height adjustment? The thread length is 41 mm, enabling straightforward spindle adjustment for precise alignment. Is the clamp suitable for repetitive assembly tasks? Yes, the lever-style mechanism and rated forces make the clamp well suited to repetitive fixturing and small assembly operations. What finish and upkeep are recommended? The unit has a blackened finish; maintenance is limited to routine inspection and lubrication of pivot points to ensure long service life. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Toggle Clamp Vertical Base With Hook, Zinc Plated, 41mm Thread Length - Kukamet
Benefit from a galvanised latch clamp that combines sturdy vertical-foot mounting with a 2,500 N holding force for reliable, repeatable closures in production environments. Order the 412-3 directly via Metav Werkzeuge or consult our specialists for application guidance. Latch clamp 412 — galvanised closure clamp with 2,500 N holding force (Kukamet) Latch clamp 412 is a compact closure clamp designed for secure, repeatable locking in jigs, fixtures and small assemblies across industrial workshops. Galvanised steel finish for corrosion resistance Vertical-foot mounting for stable installation Holding force 2,500 N secures the workpiece Integrated hook allows fast engagement Secure clamping for continuous production The galvanised latch clamp delivers a dependable mechanical solution where repeatability matters. The combination of a 2,500 N holding force and a 2,000 N closing force ensures components remain fixed under dynamic loads, reducing rework and downtime. Galvanising protects the clamp against corrosion in humid or workshop environments, extending service life and preserving clamp geometry. The compact, lightweight construction at 0.325 kg allows simple handling and fast replacement without sacrificing stability. Simple mounting and quick engagement save time Equipped with a vertical-foot mounting arrangement and an integrated hook, the device installs directly on machine tables or fixtures and enables rapid engagement and release. The 41 mm thread length supports precise height and position adjustment; this adjustability is beneficial when aligning parts for welding, assembly or inspection. As a mechanical lever clamp, it avoids electrical complexity and supports straightforward maintenance routines, simplifying process integration on assembly lines and in toolrooms. Durable finish and broad workshop use Manufactured in galvanised material, the clamp resists surface wear and maintains reliable contact geometry even with frequent operation. The robust design suits a wide range of workshop uses, from fixture building to light-duty holding tasks in metalworking and fabrication. The compact format of the latch supports dense fixture layouts where space is limited while still offering a reassuring holding capacity that meets industry requirements. Specifications and stable performance make this an economical choice for standardised fixturing. Choose the Kukamet latch clamp 412 for robust, repeatable closures and contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply from stock. Technical data Article number: 412-3 GTIN: 8680731502565 Brand: Kukamet SKU: 412-3 Facts Weight: 0.325 kg Max closing force: 2,000 N Max holding force: 2,500 N Thread length: 41 mm Special features Material: galvanised Mounting: vertical foot Hook: integrated eClass: 21041718 ETIM: EC011973 FAQ What is the difference between closing force and holding force? Closing force refers to the force applied during engagement, while holding force indicates the sustained load the latch clamp can resist; the Kukamet latch clamp 412 offers a closing force of 2,000 N and a holding force of 2,500 N. Can this clamp be mounted on a machine table with pre-drilled holes? Yes, the vertical-foot mounting of the latch clamp 412 is suitable for direct attachment to tables and fixtures with compatible hole patterns, and the 41 mm thread length allows fine height adjustment. Is the surface treatment suitable for outdoor or humid workshop use? The galvanised finish provides good corrosion resistance for humid workshop environments and occasional outdoor exposure, prolonging the functional life of the closure clamp. Does the clamp include a hook for quick locking? Yes, the unit is supplied with an integrated hook to facilitate fast engagement and secure latching in repetitive assembly operations. What is the weight and how does that affect fixture design? At 0.325 kg, the latch clamp is lightweight, which simplifies handling and reduces added mass in fixtures while still delivering the rated holding capacity. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Vertical Clamp 111mm Arm, Massive Holding Arm With Safety Lock, Blackened Finish - Kukamet
Robust clamping and compact installation reduce setup time while keeping workpieces secure under repeat load. With a 111 mm massive arm, an integrated safety lock and rated holding force of 2,500 N, this clamp combines reliability and space-saving mounting for fast fixture changes. Order or request advice via Metav Werkzeuge for direct supply from Emmerich. Vertical toggle clamp 213 — Angle-base vertical clamp with 111 mm arm (Kukamet) The Vertical toggle clamp 213 is a compact vertical clamping device designed for secure fixture holding in jigs, small assemblies and repetitive production tasks. Angle-base mounting for flexible installation Massive holding arm with safety locking Max holding force 2,500 N, clamping force 2,000 N 111 mm arm length, lightweight at 0.43 kg Secure hold for repetitive production and tooling The combination of a high holding force and a defined clamping force delivers consistently secure workpiece retention across repeated cycles. Rated at 2,500 N holding force and 2,000 N clamping force, the device is suited to light- and medium-duty fixtures where repeatability and safety matter. The mechanism’s toggle geometry converts operator input into reliable clamping pressure, ensuring short cycle times and reduced rework risk. This technical consistency supports predictable assembly times and higher throughput without complex adjustments. Flexible mounting that saves space on the bench Equipped with an angle base, the clamp allows installation on vertical or angled surfaces, optimising use of available fixture space and enabling closer pack-outs in jigs. The 111 mm arm provides reach without excessive overhang, while the compact footprint of the base reduces interference with neighbouring tooling. Installation is straightforward on standard fixture plates; the mounting arrangement is designed to integrate into typical workshop setups, offering a low-complexity method to add a durable clamping point to existing jigs. Durable construction and operator protection Finished in a blackened surface treatment, the clamp resists wear and offers a low-maintenance protective layer suitable for workshop environments. The massive holding arm increases rigidity under lateral load, while the integrated safety lock secures the clamp in the closed position during handling or transport of fixtures. At a nominal weight of 0.43 kg, the device is easy to fit and replace, reducing downtime during tool changes. These construction choices combine to extend service life and reduce lifecycle interruptions. Practical advantages for workshops and small-scale production Designed for application in clamping technology, the unit is particularly valuable where compactness, repeatability and operator safety are priorities. Minimal maintenance is required thanks to robust mechanical components, and the simple lever action is compatible with manual operation and mechanised pick-and-place environments. The clamp’s straightforward design supports quick retrofitting to existing assemblies, making it a pragmatic choice for workshops seeking dependable, low-overhead clamping points. Contact Metav Werkzeuge for a tailored recommendation on incorporating the Kukamet vertical toggle clamp 213 into existing fixtures; Metav’s Emmerich team can advise on compatibility and supply directly from stock Technical data Article number: B213-3-D-L-C2 Model: 213 Manufacturer: Kukamet Facts Arm length: 111 mm Max clamping force: 2,000 N Max holding force: 2,500 N Weight: 0.43 kg eClass: 21041717 ETIM: EC011973 Special features Angle-base mounting Massive holding arm Safety locking mechanism Finish: blackened Material: blackened steel FAQ What applications is this clamp suited for? The vertical toggle clamp 213 by Kukamet is suitable for jigs, small assembly fixtures and repetitive production tasks where compact, secure clamping is required. How much force does the clamp deliver? Rated values show a clamping force of 2,000 N and a holding force of 2,500 N for the Kukamet 213 vertical toggle clamp (SKU B213-3-D-L-C2). Can the clamp be mounted on angled plates? Yes — the angle-base mounting provides flexible installation on vertical or angled fixture plates to save workspace and improve layout density. Is the clamp protected against workshop wear? The device features a blackened finish and a massive holding arm for enhanced durability in standard workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Vertical Clamp 117mm Arm, Massive Holding Arm With Safety Lock, 2500 N Hold Force - Kukamet
Take advantage of the combination of a massive holding arm, a safety lock and a compact 117 mm reach to secure workpieces reliably; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. 211 Vertical clamp by Kukamet — horizontal foot, 2,500 N holding force A 211 vertical clamp designed for secure, repeatable clamping in workshop fixtures and jigs, suited to general industrial and maintenance tasks. Massive holding arm with safety lock Horizontal foot for straightforward mounting 2,500 N holding force for secure clamping Compact 117 mm arm, weight 0.41 kg Heavy-duty clamping for reliable production The 211 delivers a clear technical advantage through its high holding force and robust construction. With a maximum holding force of 2,500 N and a clamping capability up to 2,000 N, this vertical lever clamp is engineered to keep components immobile during machining, assembly or inspection. The values are expressed as force ratings in newtons (N) to allow straightforward comparison with other fixtures. The robust mounting and precise lever geometry reduce the risk of part movement, improving process stability and reducing rework. This makes the clamp particularly useful where consistent, repeatable clamping is required to maintain production quality. Space-saving design that simplifies fixture layouts Compact dimensions and a horizontal foot enable straightforward integration into jigs and workbenches. The 117 mm arm reach provides a balance between accessibility and compactness, while the low weight (0.41 kg) minimises added mass on movable plates and reduces inertia in dynamic applications. The horizontal base allows the clamp to be mounted close to the workpiece, saving valuable space on the fixture plate and enabling denser tooling arrangements. For engineers planning fixture layouts, the compact form factor helps maintain clearances and supports modular jig design. Safe operation with secure locking and robust arm Safety and process assurance are addressed by the safety lock and a massive holding arm, which together prevent accidental opening under load. The locking mechanism is designed for positive engagement, improving operator confidence during handling and reducing the chance of unintended release. Such design elements contribute to safer shop-floor practice and fewer interruptions to workflow. Where operator safety and unattended machining are priorities, this clamp provides a dependable mechanical safeguard that complements procedural controls. Finish, maintenance and compatibility with workshop environments Finished in a blackened surface treatment, the clamp resists corrosion and presents a low-reflective appearance suited to industrial environments. The surface treatment protects the metal and simplifies cleaning; routine visual inspection and occasional lubrication of the pivot points are sufficient for long service life. Constructed for general workshop use, the clamp is compatible with common fixture plates and standard bolting patterns when mounted via the horizontal foot. Its straightforward mechanical design avoids complex servicing while delivering a dependable service life. For compact, robust clamping select the Kukamet 211 — contact Metav Werkzeuge for tailored application advice and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B211-3-D-L-C2 Manufacturer: Kukamet Facts Arm length: 117 mm Weight: 0.41 kg Maximum clamping force: 2,000 N Maximum holding force: 2,500 N Model designation: 211 Mounting style: horizontal foot Special features Massive holding arm Safety lock Finish: blackened (Schwarz brüniert) Suitable for workshop fixtures and jigs FAQ How much holding force does the 211 provide? The 211 vertical clamp provides a maximum holding force of 2,500 N to keep workpieces secure during machining and assembly operations. What is the maximum clamping force of this clamp? The clamp offers a maximum clamping force of 2,000 N, a specification that refers to the applied clamping load when the lever is engaged. Can the clamp be mounted on a fixture plate? Yes, the horizontal foot allows straightforward mounting to fixture plates and workbenches for jig and tooling setups using standard bolting patterns. What maintenance does the 211 require? Routine maintenance for the 211 includes visual inspection, occasional lubrication of pivot points and ensuring the safety lock engages cleanly; no specialised servicing is required. Is the 211 suitable for repetitive production use? Designed for workshop and fixture environments, the 211 is suitable for repetitive production tasks where reliable, repeatable clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Vertical Clamp With Massive Support Arm, Safety Lock, 117mm Reach - Kukamet
Take advantage of the combination of a massive holding arm, a secure safety lock and a compact 117 mm reach for reliable vertical clamping in small production and jig applications; order the Vertical clamp 212 directly via Metav Werkzeuge or consult our advisors if required Vertical clamp 212 — vertical clamp with 2,500 N holding force, 117 mm arm (Kukamet) The Vertical clamp 212 is a vertical clamping device designed for secure, repeatable holding in fixtures, jigs and assembly benches across workshops and light production environments Massive holding arm with safety lock 117 mm arm length for tight spaces 2,500 N maximum holding force Blackened finish for corrosion resistance Consistent, measurable clamping performance for production The device delivers a clear, technical advantage through its 2,000 N clamping force and 2,500 N holding force, values that describe different aspects of operation: the clamping force is the active force applied during closure, while the holding force indicates the resistance to opening under load. Those figures translate into reliable repeatability for batch work and make the component suitable for demanding fixture tasks where stability matters. The specification supports quicker set-ups and fewer re-clamps, contributing directly to process efficiency and reduced cycle time. Space-saving design with robust construction With an 117 mm arm length and a compact footprint, the clamp is intended for use where space is limited without sacrificing strength. The massive holding arm provides a high rigidity-to-weight ratio, and the overall mass of 0.37 kg combines portability with mechanical stability. The vertical foot mounting enables straightforward installation into plates or fixture blocks, while the blackened finish offers basic surface protection and a subdued appearance that resists workshop wear. This balance of small form factor and robust build supports versatile use in both repair shops and production jigs. Built-in safety and simple integration into workflows A dedicated safety lock secures the clamp in the closed position, reducing the risk of accidental release and improving operator confidence during assembly operations. The mechanism is suitable for repetitive manual clamping and can be integrated into semi-automated stations where a positive locked state is required. The mechanical design keeps maintenance needs low, and the solid construction minimises inspection intervals. Together, these properties provide practical peace of mind for workshop supervisors demanding dependable daily performance. For tailored advice or to secure supplies of the 212 vertical clamp from Kukamet, contact Metav Werkzeuge for an efficient and reliable procurement route Technical data Article number: B212-3-D-L-C2 Model: 212 Manufacturer: Kukamet Facts Arm length: 117 mm Weight: 0.37 kg Max clamping force: 2,000 N Max holding force: 2,500 N eClass: 21041717 ETIM: EC011973 Special features Massive holding arm Safety lock Vertical foot mounting Blackened finish Suitable for fixtures and jigs SKU: B212-3-D-L-C2 FAQ What maximum holding and clamping forces does the clamp offer? The Vertical clamp 212 provides a maximum clamping force of 2,000 N and a maximum holding force of 2,500 N, suitable for many small-scale production and fixture applications. Can this clamp be mounted on fixture plates or tooling blocks? Yes, the unit is designed for vertical foot mounting, making it straightforward to secure to plates or blocks used in jigs and fixtures. Is the arm suitable for confined spaces on assembly benches? The 117 mm arm length offers a compact reach that is particularly useful where space is limited while preserving clamping stability. What safety features are included? The clamp is equipped with a safety lock that fixes the arm in the closed position to prevent unintentional opening under load. What material and finish does the clamp have? The component is delivered with a blackened finish, providing basic corrosion resistance and a durable workshop surface. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Vertical Clamp With Safety Lock, Angle Base M8x50 - Kukamet
Take advantage of a compact clamp that delivers a 2,500 N holding force, a 2,000 N pressing capacity and a secure safety locking feature for reliable fixture performance; Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 213 — vertical lever clamp with safety lock, 2,500 N holding force (Kukamet) The Vertical clamp 213 is a compact vertical lever clamp designed for secure workpiece retention on jigs and fixtures in metalworking and general workshop applications. Safety locking mechanism for secure clamping Holding force 2,500 N for robust retention Pressing capacity 2,000 N for consistent action Angle base for stable mounting and simple integration Reliable clamping performance that keeps production running The compact vertical lever clamp combines a high holding force with controlled pressing capacity, offering repeatable clamping cycles for jig-based manufacturing. The specification of 2,500 N holding force and 2,000 N pressing capacity translates into dependable retention during machining and assembly operations, reducing rework and inspection time. Where force balance matters, the distinction between holding and pressing capacities ensures that the clamp applies a stable load while absorbing dynamic process forces, preserving component geometry and tooling life. The unit’s lever-style actuation provides a quick, mechanical advantage for fast cycle times without complex pneumatics. Secure operation and straightforward integration into fixtures Designed for uncomplicated mounting, the clamp features an angle base that allows a low-profile attachment to plates and tooling blocks, and an M8x50 spindle for adjustable contact with workpieces. The integrated safety lock prevents disengagement under vibration and during incidental impacts, enhancing operator confidence and process safety. A compact 0.47 kg body minimises added mass on fixtures while maintaining structural stiffness, and the lever mechanism permits rapid manual or fixture-actuated clamping sequences. The combination of a small footprint and standard spindle thread supports retrofitting into existing jig layouts with minimal modification. Durable finish and dependable service life for workshop environments Surface treatment in a blackened finish protects the clamp against wear and offers good corrosion resistance in standard workshop atmospheres. The device’s mechanical simplicity means fewer wear-prone components and straightforward replacement of the contact spindle when required. As a lever-style clamping device from Kukamet, it delivers a balance of robust function and low maintenance demands that suits high-mix, repetitive production as well as smaller workshop setups where space and reliability are priorities. The clamp’s proven concept supports long-term fixture stability and predictable process outcomes. For secure, compact clamping solutions order the Kukamet Vertical clamp 213 through Metav Werkzeuge or consult our specialists at Metav Werkzeuge for application advice and fixture recommendations Technical data Article number: B213-3-L GTIN: 8680731507997 SKU: B213-3-L Facts Weight: 0.47 kg Pressing capacity (max): 2,000 N Holding force (max): 2,500 N Spindle thread and length: M8x50 Category: Spanner / clamp Special features Blackened finish With safety locking Angle base (Winkelfuß) Lever-style vertical clamp FAQ What forces can the clamp handle? The Vertical clamp 213 from Kukamet provides a maximum holding force of 2,500 N and a pressing capacity of 2,000 N, suitable for many machining and assembly fixtures. How is the clamp mounted to a fixture? Mounting is via the angle base; the clamp’s design permits secure attachment to tooling plates and blocks using the base fixing points for stable integration. What spindle specification does the clamp use? The clamp uses an M8x50 contact spindle, allowing adjustable contact length and straightforward replacement when required. Does the clamp include a safety feature to prevent accidental release? Yes, the clamp is supplied with an integrated safety locking mechanism that secures the lever position under vibration and incidental loads. Is the clamp suitable for compact jig designs? Its compact construction and 0.47 kg mass make the clamp well suited to space-constrained jigs while preserving clamping performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Vertical Mount Toggle Clamp With Hook, Stainless Steel, 1500 N Thrust, 45 mm Thread Length - Kukamet
Robust, corrosion‑resistant stainless steel construction combined with a vertical-foot mounting ensures dependable clamping with a rated 1500 N closing force and 2000 N holding capacity; ideal for repeatable fixtures and jigs. Order the latch clamp 312 directly via Metav Werkzeuge or ask our consultants if needed. Latch clamp 312 (S312-2) — Kukamet stainless steel vertical-foot latch clamp, 1500 N clamping The Latch clamp 312 is a compact lever-actuated latch clamp designed for secure fastening in fixtures, jigs and assembly stations where a low-profile, corrosion‑resistant solution is required Stainless steel construction Vertical-foot mounting 1500 N clamping force Hook latch with 2000 N holding Secure clamping that reduces rework and downtime The lever-actuated closure delivers a clearly defined 1500 N closing force, resulting in consistent part retention and reduced variability during machining or assembly. Consistent clamping force minimises slippage and the need for rework, supporting higher first-pass yield. The presence of a hook latch increases resistance to vibration, so setups remain stable through cycle changes and handling. Corrosion resistance for long service life in production Constructed from stainless steel, the device resists corrosion in humid or coolant‑exposed environments and therefore maintains dimensional reliability over time. The material choice reduces surface maintenance and replacement frequency, supporting predictable spare-part planning and lower total cost of ownership for the workshop. Compact mounting and straightforward integration The clamp features a vertical foot mounting arrangement that eases placement on flat fixture plates and tooling blocks. With a threaded engagement length of 45 mm and a net weight of 0.175 kg, the unit suits compact jigs and can be secured quickly without large mounting footprint, enabling efficient workstation layout and faster changeovers. Practical design focused on production efficiency A dedicated hook provides a positive lock and a rated 2000 N holding capacity for static retention once engaged. The compact lever profile and smooth operating geometry support repeatable manual actuation, making it suitable for assembly lines and bespoke fixturing where quick, reliable closures are required. The part is supplied as SKU S312-2 for straightforward ordering and inventory tracking. For supply, technical clarification or to discuss compatibility with existing fixtures, contact Metav Werkzeuge GmbH in Emmerich—phone +49 2822 7131930 or eMail info@metav-werkzeuge.com—to secure Kukamet latch clamps for the next production run Technical data Article number: S312-2 GTIN: 8680731506686 Brand: Kukamet Core figures Clamping force: 1500 N Holding force: 2000 N Thread length: 45 mm Weight: 0.175 kg Features & materials Material: stainless steel Mounting: vertical foot With hook: yes Special feature: none FAQ What is the rated clamping force of this latch clamp? The latch clamp provides a rated clamping force of 1500 N, ensuring reliable retention for typical fixture and jig applications. Is the clamp suitable for use in humid or coolant environments? Yes. The stainless steel construction of the Kukamet latch clamp resists corrosion and is suitable for environments where moisture or coolant exposure occurs. How is the clamp mounted to a fixture plate? Mounting is via a vertical foot arrangement with a threaded engagement length of 45 mm, allowing secure attachment to flat plates or tooling blocks. What holding capacity does the hook latch provide? The hook delivers a holding capacity of 2000 N when engaged, offering positive retention against vibration and handling. Which SKU should be ordered for this model? Order using SKU S312-2 for this Kukamet latch clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20000N Horizontal Base Clamp With Hook, 65mm Thread Length, 25kN Holding Force - Kukamet
Take advantage of the combination of robust holding force, stable horizontal-foot mounting and a cast, blackened body for dependable fixture performance — order the toggle latch clamp directly via Metav Werkzeuge or consult our specialists if needed. 341-5 Toggle Latch Clamp (Kukamet) — horizontal foot, 25 kN holding force The 341-5 Toggle Latch Clamp is a heavy-duty latch clamp for industrial fixturing and assembly, engineered for horizontal-foot mounting and dependable retention in repetitive clamping operations. Heavy-duty holding force 25,000 N Horizontal foot for stable mounting Cast body with blackened finish Integrated hook for secure engagement Secure clamping where repeatability matters The clamp delivers a holding force of 25,000 N, providing secure retention for production jigs and assembly fixtures. This level of force translates into reliable fixation under dynamic loads and reduces the risk of movement during machining or assembly steps. The specified pressing force of 20,000 N supports strong engagement of the latch mechanism, so setups remain constant from one cycle to the next. For workshops and production lines seeking measurable performance improvements, the clamp’s force ratings offer a quantifiable basis for fixture design and process planning. Robust construction designed for long service life Constructed with a cast body and a blackened finish, the design prioritises mechanical strength and surface protection against everyday wear. The substantial mass of the unit (approximately 2.235 kg) contributes to dimensional stability when mounted, while the horizontal-foot mounting ensures a low profile and secure attachment to fixture plates. A 65 mm thread length allows fine adjustment of the engagement point, and the integrated hook provides positive latching without additional hardware. These features together reduce maintenance intervals and support consistent operation in industrial environments. Fast, ergonomic operation for efficient workflows As a lever-type latch clamp, the mechanism enables quick manual actuation for rapid clamping and unclamping. The toggle action delivers a stable locked state that resists vibration and accidental release, which is beneficial in both machining and assembly contexts. The simple mechanical design minimises downtime and simplifies replacement planning in supply chains. For production teams focused on process efficiency, the clamp offers straightforward integration into existing fixtures and jigs, helping to shorten cycle times and increase throughput. For robust, workshop-ready clamping from Kukamet, order the 341-5 through Metav Werkzeuge — contact our Emmerich team on +49 2822 7131930 or info@metav-werkzeuge.com to confirm suitability for specific fixtures and applications Technical Data Article: Verschlussspanner 341 SKU: 341-5 GTIN: 8680731504743 Facts Weight: 2.235 kg Holding force: 25,000 N Pressing force: 20,000 N Thread length: 65 mm eClass: 21041718 ETIM: EC011973 Special features Cast body with blackened finish Horizontal foot mounting Integrated hook for engagement No additional special features listed FAQ What maximum holding force does this clamp provide? The 341-5 Toggle Latch Clamp from Kukamet provides a maximum holding force of 25,000 N, suitable for demanding fixture retention tasks. Is the clamp suitable for horizontal mounting on fixture plates? Yes, the clamp is designed with a horizontal foot for stable mounting, making the 341-5 appropriate for low-profile fixture installations. What material and finish does the clamp have? The unit features a cast body with a blackened finish, delivering mechanical strength and a degree of surface protection for industrial use. Can the engagement point be adjusted? Adjustment is possible via the 65 mm thread length, which allows fine tuning of the engagement position to suit different fixture geometries. Which applications are typical for this type of latch clamp? The toggle latch clamp is intended for industrial fixturing, assembly jigs and repetitive clamping operations where repeatability and secure retention are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Horizontal Combination Clamp, Zinc Plated, 0.79kg - Kukamet
Take advantage of the combination of robust 2,000 N clamping force, a corrosion-resistant zinc-plated finish and compact design for reliable, repeatable fixture work; order directly via Metav Werkzeuge or consult the specialists for specification support. Kombispanner 711 — Horizontal-foot lever clamp with 2,000 N holding force by Kukamet A Kombispanner 711 provides a heavy-duty toggle action for securing workpieces in jigs and fixtures, mounted via a horizontal foot for stable bench or plate installation. 2,000 N clamping force Horizontal-foot mounting Zinc-plated corrosion resistance Compact weight 0.79 kg Consistent clamping where process stability matters The clamp delivers a defined holding force of 2,000 N, generated by a stable toggle mechanism that converts lever movement into secure retention. This mechanical principle ensures repeatable clamping with minimal adjustment, which is particularly valuable for short-cycle production and quality-controlled assembly. The compact construction keeps inertia low while providing reliable pressure, reducing the need for frequent re‑setting and limiting downtime in fixtures and jigs. Simple integration into existing fixtures and jigs Fitted with a horizontal foot mounting, the unit can be fastened directly to plates or benches without additional adapters. The mounting orientation is suited to applications where the clamping arm is required to pivot parallel to the base, enabling unobstructed access above the workpiece. In practice, this means easier alignment during set-up, fewer interferences with tooling and a cleaner workflow for batch processes that demand consistent part orientation. Durable finish for workshop environments Constructed with a zinc-plated surface, the clamp resists corrosion and everyday wear in workshop conditions. The protective coating extends service life and reduces maintenance frequency, so the fixture remains precise without constant upkeep. Galvanic protection combined with solid mechanical design supports long-term dimensional stability, which is essential when fixtures are relied upon for repeated measurement or machining operations. Compact design that supports flexible use At just 0.79 kg, the clamp is light enough for mobile fixtures yet robust enough for fixed assembly stations. The lever-operated principle provides quick actuation and positive locking, supporting fast throughput in repetitive tasks. For operations that balance space constraints with the need for firm retention, this type of toggle clamp offers an economical, space-saving solution that integrates into both manual and semi-automated processes. Contact Metav Werkzeuge for advice on integrating the Kukamet Kombispanner 711 into fixtures and to secure a reliable clamping solution tailored to production needs Technical Data Article number: 711-2 GTIN: 8680731504309 Brand: Kukamet Facts Holding / clamping force: 2,000 N Weight: 0.79 kg ECLASS: 21041716 ETIM: EC011973 Materials & Features Material: zinc-plated Mounting: horizontal foot Type: lever / toggle clamp FAQ What clamping force does the clamp provide? The clamp provides a rated holding force of 2,000 N; the Kukamet Kombispanner 711 is specified for consistent retention in jigs and fixtures. How is the clamp mounted to a fixture plate? Mounting is via a horizontal foot; the design allows screws or bolts to fasten the base plate directly to jig or bench surfaces for stable installation. Is the finish suitable for humid workshop conditions? Yes. The zinc-plated surface on the Kukamet 711 offers corrosion resistance suited to typical workshop environments, reducing maintenance needs. Can the clamp be used for serial production set-ups? The repeatable toggle action and defined holding force make this clamp suitable for short-cycle production and repeated assembly tasks where consistent clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Pneumatic Clamp 90° Vertical Base Zinc Plated, 2500N Holding Force - Kukamet
Take advantage of the clamp’s combination of reliable pneumatic actuation, galvanised durability and compact weight to maintain steady production flow. Benefit from a right‑angle mounting design with a 2,000 N actuation capacity and a 2,500 N holding force for secure fixturing; order directly via Metav Werkzeuge or ask the consultants for application advice. Kukamet Pneumatic Clamp 652 — Vertical‑foot clamp with 2,000 N actuation The 652 Pneumatic Clamp is a vertical‑foot, right‑angle pneumatic clamping solution intended for industrial and workshop fixture applications. Vertical foot for rigid right‑angle mounting Max. actuation force 2,000 N Holding force up to 2,500 N Galvanised steel for corrosion resistance Consistent force for reproducible clamping Engineered for repeatable operation, the 652 Pneumatic Clamp delivers a controlled actuation of 2,000 N, enabling consistent part retention in production cycles. Pneumatic actuation translates compressed‑air energy into linear clamping motion, which reduces operator variability and speeds up cycle times compared with manual toggles. The specified 2,500 N holding capacity indicates the maximum static retention the device can sustain once engaged; this separation of actuation versus holding values helps in selecting the clamp for assemblies that require brief high forces to engage and sustained clamping during machining or inspection. Robust construction for workshop conditions Constructed from galvanised steel and weighing 0.91 kg, the clamp balances durability with low mass to simplify integration into multi‑station fixtures. The corrosion‑resistant finish extends service life in mixed workshop environments, while the compact design minimises inertia on moving fixtures. The vertical‑foot mounting provides a stable base for right‑angle clamping arrangements, reducing torsional stress on the clamped component. Where frequent part changes occur, the lightweight assembly helps maintain agility without compromising structural integrity. Practical installation and operational advantages Mounting via a vertical foot at a 90° angle allows straightforward installation on fixture plates and sub‑assemblies, supporting modular fixturing concepts. The clamp’s mechanical simplicity lowers maintenance demand: periodic checks of pneumatic supply and pivot lubrication ensure reliable performance. The compact footprint is suited for dense fixture layouts, freeing space for tooling or sensors. Specifying the clamp by SKU 652‑3 and confirming the galvanised finish supports procurement clarity and compatibility checks for production planners. Contact Metav Werkzeuge to discuss fitment and delivery of Kukamet clamps or request technical assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 652-3 GTIN: 8680731505252 Category: Spanner Article name: Pneumatic clamp Facts Max. actuation force: 2,000 N Max. holding force: 2,500 N Weight: 0.91 kg Angle: 90° ECLASS: 21021004 ETIM: EC011973 Special features Material: galvanised steel Mounting: vertical foot Arm: not applicable Particular feature: none FAQ What clamping and holding forces does the clamp provide? The 652 pneumatic clamp offers an actuation force of 2,000 N and a holding force of up to 2,500 N, specified for engagement and static retention respectively. Is the clamp suitable for wet or corrosive workshop environments? Yes, the galvanised finish on the Kukamet clamp provides enhanced corrosion resistance suitable for mixed workshop conditions. How is the clamp mounted to a fixture plate? Mounting is by a vertical foot designed for rigid right‑angle installation, enabling straightforward attachment to fixture plates and sub‑assemblies. What weight and footprint considerations apply for fixture design? The clamp weighs 0.91 kg and has a compact footprint, making it suitable for dense fixture layouts where minimising mass is beneficial. Can the clamp be used in automated pick‑and‑place or CNC machining fixtures? The pneumatic actuation and robust holding capacity make the clamp appropriate for automated fixtures and machining operations where reliable, repeatable clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp 111mm Arm, Massive Holding Arm With Safety Lock, Galvanised - Kukamet
Combining a galvanised finish, a 111 mm heavy-duty arm and a 2000 N clamping rating, the Kukamet Vertical Clamp 213 provides dependable clamping with rapid engagement for everyday workshop tasks. For reliable supply and technical guidance, order the vertical clamp directly via Metav Werkzeuge or consult the technical team for application advice. Vertical Clamp 213 — Kukamet vertical clamp with 2000 N clamping and 111 mm arm The Vertical Clamp 213 is a compact vertical clamping device intended for fixture and holding tasks in metalworking and assembly applications, fitted with an angle-foot mount for secure attachment. 2000 N clamping force 2,500 N holding capacity Galvanised corrosion-resistant finish 111 mm sturdy holding arm Consistent clamping performance for production workflows A stable clamping force is essential for repeatable machining and assembly. The vertical clamp delivers a defined 2000 N clamping output with a maximum holding capacity of 2,500 N, ensuring blanks and components remain stationary during operations where vibration or side loads occur. The distinction between clamping and holding capacities improves process predictability: the clamping value denotes the active force applied during engagement, while the higher holding figure indicates the part-retention capability under external loads. This behaviour supports reliable cycle times and reduced rework in batch production. Built for durability and secure handling in workshops Robustness and operator safety were prioritised in the design. A galvanised surface treatment provides corrosion resistance for prolonged use in workshop environments, while the heavy-duty arm construction resists deformation under load. Integral to safe operation is the safety lock, which prevents unintended release once the clamp is engaged; the mechanical lock is suited to repetitive use where accidental opening would risk part damage or interruption. The combination of durable materials and locking function reduces maintenance intervals and contributes to a safer workplace. Compact mounting and flexible integration for fixtures Space-conscious fixture design benefits from a compact actuator with an angle foot mounting option and a 111 mm reach. The small mass (approx. 0.43 kg) facilitates positioning in confined jigs or on moving subplates without significantly increasing inertia. The design enables easy integration into multi-clamp arrays and automated stations where low-profile clamping points are required. Where precise positioning is needed, the rigid support arm and consistent engagement mechanics aid in maintaining datum repeatability between cycles. Choose procurement via Metav Werkzeuge for assured availability and expert application advice on the Kukamet Vertical Clamp 213 — contact Metav Werkzeuge in Emmerich for product matching and delivery coordination Technical Data Article number: 213-3-D-L-C2 GTIN: 8680731501995 Weight: 0.43 kg Material: Galvanised Mounting: Angle foot Facts Clamping force (max): 2000 N Holding capacity (max): 2,500 N Arm length: 111 mm SKU: 213-3-D-L-C2 eClass: 21041717 ETIM: EC011973 Special features Massive holding arm Safety lock Compact vertical clamping design Suitable for fixture and assembly tasks FAQ What clamping and holding values does the Vertical Clamp 213 provide? The Vertical Clamp 213 offers a maximum clamping force of 2000 N and a holding capacity of 2,500 N, suitable for stationary retention and light-to-moderate machining loads. How is the clamp mounted to a fixture? Mounting is via an angle foot, which allows secure attachment to plates or jig bases while keeping the clamp profile compact. Is the surface treatment suitable for workshop conditions? The unit is galvanised to resist corrosion in standard workshop environments, prolonging service life and reducing upkeep. What safety provisions are included in the clamp design? A mechanical safety lock is incorporated to prevent unintentional release after engagement, enhancing operator safety and process reliability. What applications suit this clamping device? The clamp is intended for fixture, assembly and light machining operations where a compact vertical clamping point with repeatable force and secure locking is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp 117mm Arm, Horizontal Base, Solid Holding Arm & Safety Lock, Galvanised - Kukamet
Take advantage of a compact clamp that combines robust holding force, corrosion-resistant construction and straightforward mounting for reliable fixture performance; order supply or consult Metav Werkzeuge for application-specific advice and availability. 211 Vertical Clamp by Kukamet — massive holding arm, safety locking 211 Vertical Clamp designed for secure clamping in fixtures and jigs where a horizontal base is required Massive holding arm with safety lock Horizontal base for secure mounting 117 mm arm length for extended reach 2,500 N maximum holding force Engineered for dependable clamping and continuous production The 211 vertical clamp provides a compact solution where consistent clamping force and safety are priorities. With a maximum holding force of 2,500 N and a maximum pressing force of 2,000 N, the unit is suited to repetitive fixture operations and short-cycle production tasks that demand repeatable restraint. The massive holding arm and integrated safety locking reduce the risk of accidental release during machining or assembly, supporting a safer workplace and fewer interruptions in the production flow. Easy mounting and clear technical advantages Designed with a horizontal base for straightforward attachment to jigs, plates or tooling blocks, the clamp’s 117 mm arm length gives useful reach while keeping the footprint small. The body is galvanised to resist corrosion in typical workshop environments, and at only 0.41 kg the component is convenient to position and replace in modular fixtures. The distinction between pressing force and holding force is relevant: pressing force refers to the active clamping movement, while holding force indicates the sustained resistance once the clamp is engaged — both parameters aid correct selection for the task at hand. Low maintenance, trusted supply and workshop fit Durable construction and a simple mechanical locking concept mean minimal upkeep and long service intervals, which translates into lower downtime and predictable maintenance planning. The clamp’s compact design supports integration into manual and semi-automated setups where space and reliability matter. Supply and product expertise are available from Metav Werkzeuge, whose logistics and quality filtering for the European market aim to make precision components accessible to workshops and industry alike — a further assurance of dependable supply and after-sales continuity. Contact Metav Werkzeuge in Emmerich for application guidance or to secure delivery of Kukamet vertical clamps — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 211-3-D-L-C2 GTIN: 8680731501261 Weight: 0.41 kg Facts Arm length: 117 mm Maximum holding force: 2,500 N Maximum pressing force: 2,000 N Mounting type: horizontal base Special features Material: galvanised Massive holding arm Safety locking FAQ What holding and pressing forces does the clamp provide? The Kukamet 211 vertical clamp offers a maximum holding force of 2,500 N and a maximum pressing force of 2,000 N. How is the clamp mounted? Mounting is via a horizontal base, intended for secure attachment to jigs, fixture plates or tooling blocks. What is the effective arm reach of the device? The arm length is 117 mm, giving extended reach for many clamping situations. Is the clamp protected against corrosion? The component is galvanised, providing surface protection suited to standard workshop environments. Does the clamp include a safety mechanism to prevent accidental release? Yes, the design features a massive holding arm combined with a safety locking mechanism for secure retention. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp 167mm Arm With Horizontal Base, Massive Holding Arm & Safety Lock - Kukamet
Combine robust 2,500 N holding force, zinc‑plated corrosion protection and a compact 167 mm arm for reliable, repeatable clamping. Order the unit directly via Metav Werkzeuge or consult our specialists if technical advice is needed. Vertikalspanner 211 vertical clamp — zinc‑plated, horizontal foot (Kukamet) Vertikalspanner 211 is a compact vertical clamping device for secure fixture and jig applications in workshops and light industrial environments. Solid support arm with safety lock Zinc‑plated corrosion protection Max holding force 2,500 N Horizontal foot for stable mounting Dependable clamping for repeatable production The vertical clamp offers a measurable performance advantage through its max holding force of 2,500 N and a max pressing force of 2,000 N, ensuring workpieces remain secure during machining or assembly. The rigid 167 mm arm transmits force with minimal flex, which reduces repositioning and rework. For purchasers seeking predictable throughput, these numeric values translate directly into fewer stoppages and a steadier production flow. The compact design also helps to economise bench space without compromising on mechanical integrity. Safer operation with a massive arm and lock A massive support arm combined with a safety locking mechanism reduces the risk of unintentional release during operations that involve vibration or dynamic loads. The lock provides a positive engagement that keeps the clamp closed under load, improving operator confidence and process safety. The lever action is designed for quick actuation and consistent clamping force, which supports faster cycle times while maintaining a secure hold. Low maintenance finish that prolongs service life The zinc‑plated surface finish offers corrosion resistance suitable for ordinary workshop atmospheres and reduces the need for frequent surface treatments. The light overall weight (0.41 kg) and compact footprint make the clamp easy to install and replace when required. Routine upkeep is straightforward: periodic lubrication of the pivot and inspection of the locking mechanism keeps performance within specification and minimises downtime. Practical mounting and application benefits Equipped with a horizontal foot for stable attachment, the clamp mounts securely to flat fixtures, plates or tooling bars. The design is optimised for fixture builders and maintenance technicians who require a durable, easy‑to‑integrate component for jigs and fixtures. The combination of clear technical data and a familiar mechanical principle simplifies specification and reduces the time from ordering to implementation. Contact Metav Werkzeuge for delivery and technical guidance on the Kukamet Vertikalspanner 211 with its 2,500 N holding force and zinc‑plated finish; advice and shipment are provided directly from Metav Werkzeuge in Emmerich. Technical Data SKU: 211-3-D-L-C3 GTIN: 8680731501278 Weight: 0.41 kg Material: Zinc‑plated Core technical data Arm length: 167 mm Mounting: Horizontal foot Max pressing force: 2,000 N Max holding force: 2,500 N eClass: 21041717 ETIM: EC011973 Special features Massive support arm Safety locking mechanism Corrosion‑resistant finish Category: Clamp (Spanner) FAQ Is the clamping force sufficient for machining operations? The Kukamet Vertikalspanner 211 is specified with a max holding force of 2,500 N and a max pressing force of 2,000 N, providing adequate clamping for many machining and assembly tasks that require secure workpiece retention. How is the clamp mounted on fixtures? The clamp uses a horizontal foot for stable mounting to flat plates or tooling bars; the design facilitates quick installation in jigs and fixture assemblies. Does the finish require special maintenance? The zinc‑plated finish on the Vertikalspanner 211 offers corrosion resistance; routine lubrication of moving parts and periodic checks of the safety lock are recommended to maintain long service life. What are the physical dimensions and weight? The device has a 167 mm arm length and a total weight of 0.41 kg, making it compact and easy to integrate into existing fixtures. Can the clamp be used in high‑vibration environments? The massive support arm and integrated safety locking mechanism are intended to reduce the risk of accidental release under vibration, making the clamp suitable for many shop‑floor situations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp 167mm Arm, Massive Hold Arm, 2500N Holding Force, Zinc Plated - Kukamet
Benefit from robust clamping performance and corrosion-resistant construction: the galvanised vertical toggle clamp 211 pairs a massive holding arm with a 167 mm reach and up to 2,000 N clamping force, delivering secure fixation and long service life in production fixtures. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical toggle clamp 211 — galvanised, horizontal foot (Kukamet) A Vertical toggle clamp 211 designed for secure vertical clamping in jigs and fixtures, featuring a horizontal mounting foot for stable installation. Massive holding arm for secure clamping Galvanised finish for corrosion resistance Horizontal base for stable mounting Up to 2,000 N clamping force Reliable clamping that reduces cycle-time risks The vertical toggle clamp delivers consistent, repeatable clamping through its toggle action, translating operator movement into a secure hold with a maximum clamping force of 2,000 N and a peak holding capability of 2,500 N. For production environments this means fewer rework cycles and reduced downtime: the stable clamping force supports machining, assembly and inspection operations where workpiece movement must be avoided. The robust design also minimises the need for frequent adjustments, helping to keep cycle times predictable and throughput steady. Built for durability and low-maintenance service Manufactured with a galvanised surface and a massive holding arm, the clamp resists corrosion and mechanical wear in workshop conditions. The compact mass of 0.45 kg keeps the unit lightweight for easy integration while the solid arm construction provides rigidity under load. These characteristics translate into lower maintenance demands and longer intervals between replacements, supporting a dependable production flow and reducing the total cost of ownership for workshop tooling. Easy integration into fixtures and jigs With a horizontal mounting foot and a reach of 167 mm, the clamp is straightforward to fit into modular fixtures or bespoke jigs. Its toggle-clamp geometry offers fast engagement and release, improving operator ergonomics and enabling quicker workpiece changeovers. The compact footprint and standardised attachment points make it suitable for retrofitting existing setups or specifying in new fixture designs, helping engineers to maintain consistent clamping points across multiple stations. Choose the Kukamet vertical toggle clamp 211 via Metav Werkzeuge for dependable, low-maintenance clamping — contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored application advice Technical data Article number: 211-3-D-C3 GTIN: 8680731501247 Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Facts Arm length: 167 mm Max clamping force: 2,000 N Max holding force: 2,500 N Weight: 0.45 kg Special features Galvanised finish Horizontal mounting foot Massive holding arm Toggle-clamp action FAQ What clamping force can be expected from this clamp? The clamp offers a maximum clamping force of 2,000 N and a maximum holding capability of 2,500 N, making the Vertical toggle clamp 211 suitable for medium-duty fixtures and assembly tasks. Is the clamp suitable for use in a humid or corrosive workshop environment? Yes, the galvanised finish on the Vertical toggle clamp 211 provides corrosion resistance that helps protect the component under humid shop conditions. How is the clamp mounted into a fixture? The clamp uses a horizontal mounting foot for stable attachment; the 167 mm arm reach allows alignment with common fixture geometries. Can this clamp be used for repetitive production operations? The robust arm construction and toggle action are designed for frequent cycles, offering repeatable clamping with low maintenance demands for production use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp Wafer Base Horizontal Foot Zinc-Plated, 2500N Holding Force - Kukamet
Robust clamping with a maximum clamping force of 2,000 N and a holding force of 2,500 N, combined with a galvanised finish and horizontal base for straightforward mounting. Order the 211 directly via Metav Werkzeuge or consult our specialists for integration and application advice. 211 Vertical toggle clamp – horizontal base, 2,000 N clamping force (Kukamet) The 211 vertical toggle clamp is designed for secure, repeatable workholding in jigs and fixtures where compact, reliable clamping is required. Clamping force 2,000 N Holding force 2,500 N Galvanised steel finish Horizontal base mounting Consistent force for secure machining The clamp delivers a defined clamping force of 2,000 N and a higher holding force of 2,500 N, ensuring workpieces remain stationary under load. The distinction between clamping and holding force is important: clamping force describes the active pressure during closure, while holding force indicates the retention capability once the toggle is locked. This mechanical certainty reduces component movement during drilling, milling or assembly operations and lowers the risk of rework. The design supports repeatable positioning in production jigs, making process outcomes predictable and measurable. Durable finish and compact design for workshop use Galvanised construction provides corrosion resistance for workshop environments and extends service life where exposure to coolant or humid conditions occurs. At only 0.415 kg, the unit is compact yet robust, allowing installation in confined fixtures without adding unnecessary bulk. The horizontal base mounting simplifies integration into plates and tooling while the M8x50 pressure spindle enables fine adjustment of contact pressure and compensation for part tolerances. The absence of an articulated arm reduces snagging risks and keeps the profile low for close-packed tooling layouts. Fast action, simple maintenance and system benefits The lever-style toggle mechanism offers quick, tactile actuation for efficient cycle times: close to clamp, move the part, release to open. The simple mechanical construction requires minimal upkeep; occasional lubrication and a visual check of the fastenings are typically sufficient to keep the unit in service. The clamp supports standard workshop practices and can be incorporated into manual or semi-automated fixtures. Supplied under the Kukamet designation and distributed via Metav, the product benefits from centralised quality oversight in Emmerich, which contributes to reliable availability and consistent specification compliance. For a tailored recommendation on integrating the Kukamet 211 into fixtures or assemblies, contact Metav Werkzeuge in Emmerich for procurement or technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 211-3 GTIN: 8680731501216 Manufacturer: Kukamet Facts Clamping force: 2,000 N Holding force: 2,500 N Weight: 0.415 kg Pressure spindle: M8x50 eClass: 21041717 ETIM: EC011973 Special features Material: Galvanised Mounting: Horizontal base Arm: Not applicable Special feature: None Category: Spanner Story trigger: lever clamp FAQ How much clamping force does the 211 provide? The 211 vertical toggle clamp provides a clamping force of 2,000 N and a holding force of 2,500 N for secure retention in jigs and fixtures. Is the spindle adjustable for different part heights? Yes, the M8x50 pressure spindle allows height and pressure adjustment to accommodate varying workpiece tolerances. What mounting method is required for installation? The unit is designed for horizontal base mounting; fastenings should match the base plate configuration to ensure stable fixation. What environment is the clamp suitable for? The galvanised finish suits typical workshop conditions, offering corrosion resistance for damp or coolant-exposed areas. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp With 67mm Arm, Horizontal Base, Massive Holding Arm & Safety Lock - Kukamet
Take advantage of a robust clamping solution that combines a massive holding arm, a secure safety lock and compact design for consistent workpiece retention. The vertical clamp delivers up to 2,500 N holding force and 2,000 N clamping force for dependable fixture performance. Order the unit directly via Metav Werkzeuge or consult the technical advisers for integration support. Vertikalspanner 211 – Vertical toggle clamp with massive arm and safety lock (Kukamet) The Vertikalspanner 211 is a vertical clamp designed for stable workpiece retention in jigs and fixtures, featuring a horizontal base foot for secure mounting and a compact 67 mm arm for close-edge clamping. Vertikalspanner »211« by Kukamet Massive holding arm with safety lock Holding force 2,500 N, clamping force 2,000 N Horizontal base foot, arm 67 mm Reliable force for repeatable positioning The clamp offers a high holding force of 2,500 N and a clamping force of 2,000 N, values that translate directly into reduced movement during machining and assembly. In practice, this means fewer micro-adjustments and less rework when securing parts in fixtures or on assembly jigs. The short reach afforded by the 67 mm arm enables clamping close to edges, improving access for machining operations while maintaining consistent pressure across cycles. Designed for safe, long-term use A massive arm construction, combined with an integrated safety lock, ensures the mechanism remains stable under repeated use and prevents accidental release during handling. The component’s blackened finish provides a uniform surface that reduces light reflection in inspection areas and contributes to everyday durability. At 0.41 kg, the unit is light enough for straightforward positioning yet solid enough to withstand workshop demands, simplifying fixture assembly and maintenance routines. Easy integration and versatile application Thanks to the horizontal base foot mounting, the clamp can be fitted into existing fixture plates or custom jigs without extensive modification. The toggle-style lever design makes it suitable for repetitive clamping tasks in welding, assembly and light machining environments. The model is supplied as Vertikalspanner 211 (SKU B211-3-D-L-C1) by Kukamet, offering a compact footprint that supports efficient workflow layouts and quick setup changes on the shop floor. For secure, repeatable clamping in demanding fixtures, contact Metav Werkzeuge to arrange supply of the Kukamet Vertikalspanner 211 or to request detailed integration advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B211-3-D-L-C1 Manufacturer: Kukamet Designation: Vertikalspanner 211 Weight: 0.41 kg Material finish: blackened (blued) Facts Arm length: 67 mm Clamping force (max): 2,000 N Holding force (max): 2,500 N Special features Massive holding arm Safety lock Horizontal base foot mounting Toggle (lever) clamp design FAQ What clamping and holding forces does the clamp provide? The Vertikalspanner 211 provides a clamping force of up to 2,000 N and a holding force of up to 2,500 N, suitable for reliable retention in many fixture applications. Can the clamp be mounted to standard fixture plates? Yes, the clamp uses a horizontal base foot for mounting, allowing straightforward attachment to standard plates and custom jigs. Is the clamp suitable for close-edge clamping? The 67 mm arm length and compact toggle design make this clamp suitable for close-edge applications where access and space are limited. What safety features are incorporated? The clamp includes an integrated safety lock that prevents unintentional release, enhancing user safety during handling and processing. Who manufactures the product and what is the SKU? The product is manufactured by Kukamet and supplied under SKU B211-3-D-L-C1 as the Vertikalspanner 211. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp With 67mm Arm, Massive Holding Arm And Safety Lock - Kukamet
Benefit from a compact, galvanised vertical clamp that pairs a 2,500 N holding force with a 67 mm arm for secure, repeatable workholding; its massive holding arm and safety lock provide reliable operator protection while keeping fixtures compact. Order or request advice directly from Metav Werkzeuge for fast, dependable supply. Vertical clamp 212 — Galvanised vertical‑mount toggle clamp, 2,500 N holding force (Kukamet) The Vertical clamp 212 is a vertical‑foot mounted toggle clamp engineered for secure clamping in metalworking, assembly jigs and general workshop fixtures. Galvanised corrosion‑resistant finish 2,500 N holding force for secure clamping Compact 67 mm arm for tight spaces Massive holding arm with safety lock Consistent clamping that supports production targets The clamp delivers a clear operational advantage through a high holding force of 2,500 N and a maximum pressing force of 2,000 N, which together ensure components remain immobile during machining or assembly. These figures translate directly into fewer rejects and less rework, because the clamp maintains repeatable positioning under dynamic loads. The toggle mechanism converts handle movement into secure locking action, making setup faster and results more predictable for series work. Built to withstand workshop environments Constructed from galvanised steel, the device resists corrosion and stands up to humid or oily workshop conditions. The massive holding arm increases structural rigidity and reduces flex, while the overall weight of 0.37 kg keeps the clamp light enough for portable jigs yet robust enough for daily use. This combination reduces maintenance cycles and extends service life, lowering total cost of ownership in routine production environments. Compact mounting for flexible fixture design The vertical‑foot mounting allows the clamp to be integrated into tight fixtures and modular tooling systems where space is limited. With an arm length of 67 mm, the clamp suits short‑reach applications without compromising clamping range. The vertical orientation is particularly useful where horizontal clearance is restricted or when clamps must be positioned above a workpiece to avoid interference with tooling. Safety features that protect operators and parts A built‑in safety lock secures the toggle in the closed position, preventing accidental opening during vibration or handling. The robust mechanism reduces the risk of slippage and protects sensitive workpieces from impact. Together with the sturdy holding arm, this safety provision supports safe, efficient workflows in both manual and semi‑automated stations, increasing operator confidence and process reliability. Contact Metav Werkzeuge for availability, mounting advice and delivery details for the Kukamet vertical clamp 212 — reliable workshop clamping supplied from Emmerich with expert consultation by phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: 212-3-D-L-C1 GTIN: 8680731501629 ECLASS: 21041717 ETIM: EC011973 Facts Arm length: 67 mm Weight: 0.37 kg Max pressing force: 2,000 N Max holding force: 2,500 N Special features Mounting: vertical foot Material: galvanised Massive holding arm Safety lock Category: Clamps FAQ What holding capacity does the clamp provide? The vertical clamp 212 offers a maximum holding force of 2,500 N, providing secure retention for a wide range of workshop and light industrial tasks. Can this clamp be used in corrosive or humid environments? Yes, the galvanised finish on the Kukamet vertical clamp 212 improves resistance to corrosion and suits damp workshop conditions. How is the clamp mounted to a jig or fixture? Mounting is via a vertical foot, allowing direct attachment to plates or fixture bases where a vertical mounting orientation is required. What are the primary safety features of the clamp? The clamp incorporates a safety lock and a massive holding arm that together prevent accidental release and reduce the risk of workpiece movement under vibration. Is the clamp suitable for tight or compact assemblies? With a 67 mm arm length and a compact footprint, the Kukamet clamp 212 is designed for installations where horizontal space is limited. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp With Horizontal Base, Massive Holding Arm And Safety Lock - Kukamet
Compact design, massive holding arm and integrated safety lock combine with a rated 2,000 N clamping force to provide dependable process stability in production fixtures; the horizontal mounting foot and 167 mm lever arm ensure stable installation and extended reach. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertical Clamp 211 (B211-3-D-L-C3) — 2,000 N clamping force, 167 mm arm — Kukamet A Vertical Clamp 211 designed for secure vertical holding in jigs and fixtures, fitted with a horizontal mounting foot for stable attachment Massive holding arm with safety lock 2,000 N clamping force, 2,500 N holding force 167 mm lever arm for extended reach Horizontal mounting foot for stable installation Consistent clamping performance that supports production quality The clamp delivers a clearly defined 2,000 N clamping force and a 2,500 N holding force, values that translate into reproducible holding power during assembly and machining operations. The distinction between clamping and holding force is important: the nominal clamping force indicates the active force applied by the lever mechanism, while the higher holding force reflects the clamp’s static resistance once engaged. This combination reduces rework and helps maintain tolerances, contributing to measurable improvements in throughput and first-pass yield. Durable construction and fail-safe locking for safe operation A massive holding arm and an integrated safety lock provide mechanical robustness and protection against accidental release during vibration or incidental contact. The component is finished with a blackened finish that offers corrosion resistance appropriate for workshop environments, while the compact mass (0.41 kg) makes the clamp easy to position within fixtures without compromising strength. The 167 mm lever arm affords additional mechanical advantage and reach, enabling effective clamping across a range of part geometries. Simple integration into fixtures and steady supply chain support The clamp’s horizontal mounting foot allows secure bolting to flat fixture surfaces and straightforward alignment within production jigs, enabling fast retrofit in existing setups. Supplied as a single-piece toggle clamp, it suits repetitive operations where repeatability and safety are priorities. For extended projects or multi-site rollouts, Metav Werkzeuge combines a broad product range with reliable logistics from Emmerich, supporting uninterrupted delivery and helping to consolidate purchasing for precision equipment. For local stock information, ordering options or to discuss the clamp’s suitability for a specific fixture, contact Metav Werkzeuge in Emmerich by email or phone for expert advice and prompt delivery coordination. Technical Data Article number: B211-3-D-L-C3 Manufacturer: Kukamet Model: 211 Facts Arm length: 167 mm Max clamping force: 2,000 N Max holding force: 2,500 N Weight: 0.41 kg eClass: 21041717 ETIM: EC011973 Special features Horizontal mounting foot Massive holding arm Safety lock Finish: blackened FAQ What clamping performance can be expected from this clamp? The Vertical Clamp 211 from Kukamet provides a rated clamping force of 2,000 N and a holding force of 2,500 N, designed for repeatable, secure holding in assembly and machining fixtures. How is the clamp mounted? Mounting is via the horizontal mounting foot supplied with the unit; the flat-foot design enables direct attachment to fixture plates and jigs for stable positioning. Does the clamp include a safety mechanism? Yes, the clamp features an integrated safety lock to prevent unintended opening and to maintain secure holding under vibration or incidental loads. What is the lever length and how does it affect use? The lever arm measures 167 mm, offering increased reach and mechanical advantage for clamping parts with greater overhang or variable profiles. What maintenance is recommended for long service life? Regular inspection of the locking mechanism and keeping the moving parts free of heavy contamination will preserve function; light lubrication as appropriate for the workshop environment will help maintain smooth operation of the Vertical Clamp 211. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp With Safety Lock, Horizontal Foot Mount, Black Oxide Finish - Kukamet
Take advantage of the combination of compact installation, 2,000 N clamping force, and a secure safety lock for reliable fixture holding and consistent repeatability; order the clamp directly via Metav Werkzeuge or consult our team for application advice. B211-3-L Vertical toggle clamp by Kukamet — 2,000 N clamping force, safety lock The 211 vertical clamp is a compact vertical hold-down toggle clamp designed for jigs, fixtures and production benches where secure, repeatable clamping and quick action are required. Vertical hold-down action with 2,000 N clamping force Safety lock prevents accidental release Horizontal base for simple mounting Blackened finish for corrosion resistance Secure clamping that improves process reliability A compact toggle clamp with 2,000 N clamping force and a 2,500 N holding force offers a reliable way to secure parts during machining, assembly or inspection. The mechanism converts lever movement into vertical pressure, producing a consistent and measurable clamping effect useful in repeat-production settings. The integrated M8x50 spindle allows fine height adjustment to accommodate varying workpiece thicknesses; this adjustment capability reduces setup time and improves positional accuracy. In practice, the robust clamping figures mean medium-duty fixtures can be stabilised without additional bracing, reducing secondary operations and improving throughput. Space-saving design for straightforward integration The low-profile design and horizontal base make the clamp simple to mount on fixture plates, rails or bespoke tooling. At approximately 0.415 kg, the unit is light enough to be fitted where mass is critical but sufficiently sturdy for frequent use. The blackened finish provides basic surface protection while presenting a neutral appearance in production environments. Owing to its compact footprint, the clamp can be positioned close to the workpiece to reduce lever travel and assist with ergonomic workflow planning on assembly benches and CNC loading stations. Built-in safety and maintenance-friendly construction A positive safety lock prevents unintended release during handling and when the fixture is under external load, adding a layer of operator protection and process security. The toggle action is tolerant of dirt and typical workshop contaminants, and routine maintenance is limited to periodic lubrication and inspection of the spindle thread. Durability is supported by the finished surface and solid construction, which together ensure consistent performance over many cycles and contribute to lower long-term tooling costs. Contact Metav Werkzeuge today to discuss the Kukamet vertical toggle clamp (SKU B211-3-L) and receive tailored advice and reliable delivery from Emmerich; reach out by phone at +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com Technical data Article number: B211-3-L GTIN: 8680731507720 Category: Spanner SKU: B211-3-L Numbers / Core technical data Clamping force (max): 2,000 N Holding force (max): 2,500 N Weight: 0.415 kg Spindle: M8x50 Special features / Design Mounting: horizontal base Finish: blackened (black oxide) Safety lock: integrated Material: blackened steel ETIM: EC011973 eClass: 21041717 FAQ What clamping force can be expected from this clamp? The clamp delivers a maximum clamping force of 2,000 N, which is suitable for a wide range of medium-duty holding tasks; the product B211-3-L by Kukamet is designed to provide consistent vertical pressure in fixtures. How is the clamp mounted to a fixture plate? Mounting is via the horizontal base, allowing the clamp to be bolted directly to plates or rails; the Kukamet vertical toggle clamp fits typical workshop mounting patterns and accepts an M8x50 spindle for height adjustment. Does the device include a safety mechanism to prevent accidental release? Yes, an integrated safety lock prevents unintended opening under load, increasing operator safety and maintaining workpiece position during handling. Is the clamp suitable for repeated industrial use? The robust construction, finished surface and simple maintenance requirements make the B211-3-L suitable for repetitive production cycles and fixture applications where repeatability is important. Can the spindle be adjusted for different workpiece heights? Adjustment is provided by the M8x50 spindle, enabling fine tuning of the clamping height to accommodate varying component thicknesses. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com