Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
90° 113 Horizontal Clamp With Safety Lock, Zinc Plated, 2.3 kN Thrust / 2.5 kN Hold - Kukamet
Take advantage of the combination of robust 2,500 N holding force, fast-action lever operation and a zinc‑plated corrosion‑resistant finish for dependable, repeatable clamping in light industrial and workshop jigs. Order the horizontal clamp directly via Metav Werkzeuge or consult our technical team for integration advice. Horizontal clamp 113 (SKU 113-3-L) by Kukamet — 90° angle base, safety lock Horizontal clamp 113 is a compact lever clamp intended for fast, repeatable workholding at a fixed 90° mounting angle, featuring a safety locking mechanism for secure operation. Compact lever clamp with safety lock Zinc‑plated corrosion resistance 2,500 N holding force capacity Angle base for 90° mounting Faster, repeatable clamping that keeps production moving The lever‑actuated design provides immediate clamping action while maintaining high repeatability across multiple setups. With a holding force of 2,500 N and a maximum clamping force of 2,300 N, the device delivers measurable performance suitable for light to medium workholding tasks. The M8 x 50 spindle transfers actuation force reliably, reducing setup time compared with screw‑only fixtures. The compact profile of the clamp minimises interference in fixtures and jigs, enabling denser part layouts on assembly stations and reducing cycle times through quicker clamp engagement and release. Built for workshop durability and operator safety A zinc‑plated surface finish protects the clamp against surface corrosion in typical workshop environments and supports long service intervals. The angle base lets the clamp be mounted at a true 90° orientation, which simplifies incorporation into modular fixture plates and welded frames. The integrated safety lock prevents accidental opening under load, improving operator confidence and process safety when parts are being machined or assembled. At only 0.42 kg, the unit is light enough for hand positioning during jig assembly but robust enough to withstand daily use. Practical integration into fixtures and jigs Designed as a lever clamp, the component is suited for repetitive clamping in metalworking and assembly fixtures where quick access and secure holding are required. The lever clamp format allows rapid manual operation or straightforward adaptation to simple mechanical actuation systems. The compact dimensions and standard spindle thread make the clamp straightforward to incorporate into bespoke fixtures or adjustable locating blocks. Clear numerical specifications for force and mounting angle enable planners and buyers to match the clamp to fixture loads and cycle demands without ambiguity. Contact Metav Werkzeuge today to discuss how the Kukamet horizontal clamp with safety lock and 90° angle base can improve fixture reliability; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 113-3-L GTIN: 8680731500899 eClass: 21041719 ETIM: EC011973 Core specifications Holding force (max): 2,500 N Clamping force (max): 2,300 N Angle: 90° Weight: 0.42 kg Spindle: M8 x 50 Materials and features Zinc‑plated finish Angle base mounting Safety locking mechanism Lever clamp design FAQ What maximum holding force does the clamp provide? The Horizontal clamp 113 (Kukamet, SKU 113-3-L) offers a maximum holding force of 2,500 N. How is the clamp mounted in fixtures? Mounting is via an angle base designed for 90° installation; the clamp is supplied for secure bolting to plates or frames. Does the clamp include a safety device to prevent accidental release? Yes, the product from Kukamet incorporates a safety locking mechanism to prevent unintended opening under load. What finish and weight can be expected from the unit? The clamp has a zinc‑plated finish for surface protection and weighs 0.42 kg. What spindle specification is used for force transmission? The clamp uses an M8 x 50 spindle for actuation and force transfer. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 116mm Horizontal Clamp With Solid Arm And Safety Lock, 1,000 N Closing Force - Kukamet
The galvanised design and compact 116 mm arm deliver dependable clamping with rated retention up to 1,200 N and an actuation capacity of 1,000 N, ensuring stable fixturing in light industrial and workshop applications. Order the clamp directly via Metav Werkzeuge or consult the team for specification advice. 111 Horizontal Lever Clamp – Galvanised, 116 mm arm (Kukamet) A 111 horizontal lever clamp designed for secure workholding and repeatable positioning in jigs, fixtures and assembly benches. Galvanised steel construction Massive holding arm with safety lock 116 mm reach for versatile clamping Holds up to 1,200 N retention force Consistent clamping force for reliable production The unit supplies a consistent holding force of up to 1,200 N, with an actuation capacity of 1,000 N, which translates into reliable part retention during machining and assembly operations. The 116 mm arm length provides a practical reach for a wide range of fixturing tasks while occupying minimal bench space. Specified numerical values provide a factual basis for integration in fixtures and enable planners to compare components objectively, supporting efficient process decisions. Robust construction that reduces set-up time A massive holding arm and an integrated safety lock reduce the risk of accidental release and make the clamp suitable for repetitive cycles. The horizontal foot mount aligns the clamp at a fixed 90° angle for secure lateral positioning. The galvanised finish offers enhanced corrosion resistance for workshop environments, while the small mass (0.2 kg) keeps the component easy to handle during assembly. These design choices lower setup time and contribute to sustained production uptime. Compact, service-friendly design for fixtures and jigs The clamp is engineered for quick integration into existing jigs: the horizontal base facilitates stable mounting and simple alignment in modular fixture plates. Low maintenance requirements follow from the galvanised surface and straightforward mechanical locking; routine checks focus on the lock mechanism and pivot points. The compact profile supports dense fixture layouts and is compatible with common workshop tooling standards, making it a pragmatic choice for manufacturers seeking efficient, dependable fixturing components. For specification support or to acquire the Kukamet horizontal lever clamp, contact Metav Werkzeuge — specialist advice and ordering assistance are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 111-2-D-L-C2 GTIN: 8680731500103 Manufacturer: Kukamet Category: Spanner Image: 111-D-L-main.jpg Datasheet: 111-112-113-l-katalogseite.pdf Core specifications Arm length: 116 mm Weight: 0.2 kg Max retention force: 1,200 N Max actuation force: 1,000 N Angle: 90° Features Material: galvanised Mounting: horizontal foot Massive holding arm Safety locking mechanism Story trigger: lever clamp FAQ What clamping forces are specified for this clamp? The Kukamet 111 horizontal lever clamp offers a retention force of up to 1,200 N and an actuation capacity of 1,000 N, suitable for light industrial fixturing. How is the clamp mounted in a fixture? Mounting is via a horizontal foot base; the design fixes the clamp at a 90° angle for lateral workholding and straightforward alignment in jig plates. Is the clamp protected against corrosion? The component is galvanised, which provides a protective zinc layer that increases resistance to rust in workshop and light industrial environments. Does the clamp include a safety mechanism to prevent accidental release? Yes, the clamp features a mechanical safety lock combined with a massive holding arm to reduce the risk of unintended opening during operation. Which SKU should be specified when ordering replacement parts or additional units? Specify SKU 111-2-D-L-C2 and GTIN 8680731500103 when ordering or requesting technical details for this horizontal lever clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 116mm Horizontal Clamp With Solid Arm And Safety Lock, 1200N Hold Force - Kukamet
Thanks to its robust holding arm, compact 116 mm reach and a safety lock, this clamp delivers safe, repeatable workholding under high loads; combine dependable holding force and a vertical mounting to simplify fixture design. Order the (Horizontal clamp 112) directly via (Metav Werkzeuge) or ask our consultants if needed. Horizontal clamp 112 — horizontal toggle clamp with 116 mm arm and safety lock The Horizontal clamp 112 is a compact horizontal toggle clamp designed for stable workholding in fixtures and jigs where predictable clamping force and a secure locking mechanism are required Robust holding arm with safety lock Vertical base for stable mounting Holding force 1,200 N max 116 mm arm, 90° operating angle Secure, repeatable clamping for production fixtures The clamp's robust holding arm and integrated safety lock provide a reliable means of securing components in repetitive operations. The mass of the arm and the positive locking action reduce the risk of unintentional release during handling, which improves process safety and repeatability. Designed for use where a firm, fixed clamping position is required, the device supports consistent part positioning and reduces rework. The blackened finish offers surface protection while keeping the appearance of workshop tooling professional and functional. Clear performance figures for engineering decisions With a maximum holding force of 1,200 N and a maximum push/pull value of 1,000 N, the clamp supports moderate to high clamping loads suitable for jigs in assembly and light machining contexts. An arm length of 116 mm and a 90° operating angle make the unit simple to integrate into fixtures where a perpendicular clamping stroke is needed. These numeric specifications enable straightforward comparisons with alternative clamping elements and support rapid selection for design bills of materials or workholding layouts, reducing downtime during fixture procurement. Simple mounting, durable finish and maintenance advantages The vertical base (upright foot) allows secure attachment to plates or tooling blocks, making the clamp easy to fit into multi-station jigs. The blackened finish provides corrosion resistance and a low-reflective surface suitable for industrial environments. Maintenance is limited to periodic inspection of the locking mechanism and fasteners; the solid construction minimises wear and keeps service intervals long, which lowers lifetime handling costs. For questions about integration into an existing fixture, consult the technical team for quick advice on compatibility and mounting recommendations. For supply and technical advice on Kukamet horizontal clamps, contact Metav Werkzeuge for fast local availability from Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com to confirm fit and delivery. Technical Data SKU: B112-2-D-L-C2 Model: 112 Manufacturer: Kukamet Facts Arm length: 116 mm Operating angle: 90° Maximum holding force: 1,200 N Maximum actuation (push) force: 1,000 N Weight: 0.2 kg eCl@ss: 21041719 ETIM: EC011973 Special features Vertical base (upright foot) mounting Massively constructed holding arm with safety lock Blackened finish Compact horizontal toggle clamp suitable for fixtures and jigs FAQ What mounting method does this clamp use? The clamp uses a vertical base (upright foot) for stable attachment to fixture plates and tooling blocks. What forces can the clamp handle in typical use? The unit provides a maximum holding force of 1,200 N and a maximum actuation (push) force of 1,000 N, suitable for many assembly and light machining applications. Is the locking mechanism reliable for repeated cycles? Yes, the clamp's massive holding arm and integrated safety lock are designed to provide secure engagement and dependable performance over repeated cycles. Which materials and environments is the clamp suited for? The blackened finish improves surface resistance; the clamp is intended for industrial workshop and fixture environments where a low-reflective, durable tool is preferred. Can this clamp be integrated into custom jigs and fixtures? Yes, the compact 116 mm arm and 90° operating angle make the clamp straightforward to incorporate into bespoke jigs; technical specifications support quick design decisions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 116mm Horizontal Clamp, Massive Holding Arm & Safety Lock, Zinc-Plated, 1,200N Hold - Kukamet
Take advantage of the combination of robust galvanised construction, a massive holding arm with safety lock, and compact dimensions for reliable fixture clamping; order the item directly via Metav Werkzeuge or contact our consultants for application advice. Horizontal toggle clamp 112 — galvanised steel, 116 mm arm (Kukamet) The Horizontal toggle clamp 112 is a compact lever clamp for workshop jigs and fixture applications, designed for secure, repeatable clamping at a 90° angle. Horizontal toggle clamp »112« by Kukamet Massive holding arm with safety lock 116 mm arm for secure workpiece access Vertical foot mounting, 90° clamping angle Durable clamp performance that keeps production moving The horizontal toggle clamp 112 combines a galvanised steel construction with a massive holding arm and integrated safety lock, providing a secure means of holding workpieces during machining, assembly or inspection operations. The specified figures — 1200 N holding force and 1000 N clamping force — indicate the clamp’s capacity to resist movement under load; holding force refers to the maximum sustained retention, while clamping force denotes the pressure applied to the workpiece. These metrics translate into fewer repositioning steps on the production line and more consistent processing quality, supporting efficient throughput and predictable fixture behaviour. Compact layout that simplifies fixture design Engineered for confined workstations, the clamp’s 116 mm arm and vertical foot mounting enable flexible placement on plates and jigs without consuming excessive space. The 90° clamping angle creates a reliable right-angle lock that is easy to integrate in modular fixtures and assembly benches. At approximately 0.2 kg, the unit is light enough for compact nests yet substantial in feel, allowing designers to position multiple clamps in close proximity for even clamping pressure distribution. This compactness helps reduce cycle times and keeps fixture stacks lower, aiding accessibility for operators and robots alike. Safe handling and maintenance for daily workshop use The clamp’s safety lock secures the lever in the closed position, preventing accidental release during handling or transport of assemblies. Galvanised finish offers corrosion resistance, reducing the need for frequent surface treatment in humid or workshop environments and extending service intervals. The simple lever mechanics are suited to repetitive use and straightforward inspection routines; periodic lubrication of the pivot points and a visual check of the lock mechanism are usually sufficient to maintain dependable function. The robust design supports long service life under normal workshop conditions. Practical applications and integration notes Ideal for small-series production, testing rigs and manual assembly stations, this horizontal clamp performs consistently where repeatable positioning and quick clamping cycles are required. Typical tasks include holding parts for drilling, welding fixtures, inspection fixturing and press operations where a secure, right-angle clamp is required. The clamp mounts via a vertical foot, which simplifies attachment to fixture plates or welded frames. For bespoke fixtures or large-scale automation, integration advice is available to ensure correct spacing, force distribution and actuator compatibility. Contact Metav Werkzeuge for application guidance and prompt supply from our Emmerich warehouse — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 112-2-D-L-C2 GTIN: 8680731500455 Brand: Kukamet Material: galvanised steel Mounting: vertical foot Arm length: 116 mm Clamping angle: 90° Weight: 0.2 kg SKU: 112-2-D-L-C2 Facts Holding force max: 1200 N Clamping (press) force max: 1000 N Arm: 116 mm Angle: 90° Weight: 0.2 kg eClass: 21041719 ETIM: EC011973 Special features Massive holding arm Safety locking mechanism Galvanised surface finish Vertical foot for mounting Compact, light design FAQ What mounting method does this clamp use? The clamp is fitted with a vertical foot mounting method suitable for bolting to fixture plates and jigs; the vertical foot is part of the clamp’s standard configuration. What forces can be expected from the clamp in use? The Kukamet horizontal toggle clamp 112 provides up to 1200 N holding force and 1000 N clamping force, figures intended to indicate its retention and applied pressure under normal conditions. Is the clamp suitable for corrosive workshop environments? The unit features a galvanised steel finish that improves resistance to corrosion and reduces the need for frequent surface maintenance in typical workshop settings. Can the clamp be locked to prevent inadvertent release? Yes, the clamp includes a safety lock that secures the lever in the closed position to prevent accidental release during handling or transport. Which applications are appropriate for this type of clamp? Common uses include jigs for drilling and welding, assembly fixtures, inspection plates and other scenarios requiring quick, repeatable right-angle clamping; the clamp suits manual and semi-automatic production processes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 116mm Horizontal Clamp, Massive Support Arm, 1 200N Holding Force, Blackened Finish - Kukamet
Benefit from a compact, high‑rigidity clamp with a massive holding arm and reliable holding force up to 1,200 N for repeatable setups; order the Horizontal clamp 111 directly via Metav Werkzeuge or consult our advisors for specification support. Horizontal clamp 111 — horizontal clamping lever with 116 mm arm, Kukamet A robust Horizontal clamp 111 for secure workholding in jigs, fixtures and assembly applications, featuring a horizontal foot and a massive holding arm for stable clamping at a 90° angle. Massive holding arm for high rigidity Horizontal foot for stable mounting Holding force up to 1,200 N Compact weight: 0.23 kg Consistent clamping for repetitive production The lever design delivers a repeatable clamping action that keeps setups stable across production runs. With a holding force of up to 1,200 N and a pressing capacity of 1,000 N, this clamp secures components reliably during machining, testing or assembly. The rigid arm construction reduces deflection, enhancing positional accuracy and minimising rework—an advantage for engineers planning short changeovers or small-batch production. Space‑efficient fixture integration Designed for confined fixtures, the unit’s 116 mm arm and horizontal foot enable compact layout without sacrificing accessibility. The 90° angle supports low‑profile installations where clearance is limited, while the overall compact weight (0.23 kg) reduces load on positioning devices. This combination of dimensions and mass makes the clamp suitable for modular jig systems and lean production cells where footprint and repeatability matter. Durable finish and simple, low‑effort maintenance Finished in a professional blackened coating, the clamp resists corrosion and presents a uniform appearance within workshop environments. The massive holding arm and lever mechanism are engineered for frequent operation, offering longevity under regular use. Maintenance is straightforward: periodic inspection and light lubrication keep the mechanism operating smoothly, preserving clamping performance and uptime in demanding applications. Speak with Metav Werkzeuge in Emmerich for tailored fixture advice and a specification match; contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss supply and integration. Technical data SKU: B111-2-D-C2 GTIN: 8680731506969 Model: 111 Facts Arm length: 116 mm Weight: 0.23 kg Holding force: 1,200 N Pressing force: 1,000 N Angle: 90° eClass: 21041719 ETIM: EC011973 Special features Massive holding arm Horizontal foot (waagerechter Fuß) Blackened finish Lever clamp design Category: clamp FAQ What maximum holding and pressing forces does the clamp provide? The clamp offers a holding force up to 1,200 N and a pressing force of 1,000 N; the data is specified for the Horizontal clamp 111 (SKU B111-2-D-C2). For which applications is this clamp suitable? The lever clamp is intended for jigs, fixtures and assembly work where stable, repeatable workholding is required; it is commonly used in small‑batch production and assembly benches. How is the clamp mounted in a fixture? Mounting is via the horizontal foot at a 90° orientation; the 116 mm arm provides reach while maintaining a low profile for compact fixture layouts. What material finish does the clamp have and why does it matter? The unit has a blackened finish, offering surface protection and a consistent workshop appearance while helping to reduce corrosion in standard industrial environments. How heavy is the clamp for fixture design considerations? The clamp weighs 0.23 kg and is therefore easy to integrate into modular jigs and lightweight fixture systems without significantly increasing mass. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 117mm Horizontal Clamp With Massive Holding Arm And Safety Lock, Zinc Coated - Kukamet
Rely on galvanised construction, a 117 mm arm and up to 4,500 N clamping force for stable, repeatable fixture work; order the Horizontal clamp 113 directly via Metav Werkzeuge or consult the specialists if technical clarification is required. Horizontal clamp 113 — Galvanised horizontal lever clamp with angled base (Kukamet) The Horizontal clamp 113 is a galvanised horizontal lever clamp designed for secure, repeatable positioning in jigs and fixtures where a 90° hold is required. Galvanised for corrosion resistance Massive holding arm with safety lock 117 mm lever arm for deep reach Up to 4,500 N clamping force Secure clamping performance that reduces rework The Horizontal clamp 113 delivers a measurable improvement in process reliability through its 4,500 N clamping force and 5,000 N holding force, which provide stable restraint during machining and assembly operations. The 117 mm lever ensures access to recessed or awkward positions while maintaining consistent pressure, reducing the likelihood of part movement and subsequent rejects. By translating nominal forces into practical holding capacity, the clamp supports faster cycle times and fewer interruptions in small-batch production and fixture-based processes. Built to last and safe in daily use Durability and operator safety are integral to the design: the galvanised finish resists corrosion in workshop environments, while the massive holding arm and integrated safety lock prevent unintended release during handling. At 1.84 kg the unit combines a robust feel with manageable mass for fixture assembly and service. The construction minimises maintenance requirements and extends service intervals, contributing to lower lifetime resource consumption and more predictable plant availability. Simple integration into jigs, fixtures and assembly stations With an angled base designed for 90° mounting, the clamp fits standard fixture plates and can be incorporated into purpose-built jigs or modular tooling systems. The lever mechanism provides rapid clamping and unclamping, supporting high-repeatability setups and hand-operated assembly tasks. For projects that demand straightforward retrofitting, the clamp’s compact footprint and deep reach make it a practical choice for toolroom jigs, welding fixtures and manual assembly lines; if specifications need tailoring, Metav Werkzeuge can advise on compatibility and layout. Contact Metav Werkzeuge for tailored advice and availability — Metav Werkzeuge supplies from Emmerich and can confirm suitability for production applications Technical Data Article number: 113-5-D-L-C1 GTIN: 8680731501049 ECLASS: 21041719 ETIM: EC011973 Facts Clamping force (max): 4,500 N Holding force (max): 5,000 N Lever arm length: 117 mm Weight: 1.84 kg Angle: 90° Special features Material: galvanised Mounting: angled base Massive holding arm Safety lock Category: Spanner Manufacturer: Kukamet FAQ What clamping and holding forces does the clamp deliver? The clamp provides a maximum clamping force of 4,500 N and a maximum holding force of 5,000 N, as stated for the Horizontal clamp 113. Which materials and environments suit this clamp? The Horizontal clamp 113 is galvanised, making it suitable for general workshop environments where corrosion resistance is required; it is intended for fixture and jig applications rather than corrosive process baths. How is the clamp mounted in a fixture? Mounting is via an angled base designed for 90° installation, enabling integration into plates and jigs where a horizontal lever action is needed. What is the lever reach and unit weight? The lever arm length is 117 mm and the unit weighs 1.84 kg, offering a balance between reach and manageable mass for fixture assembly. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 117mm Horizontal Clamp With Massive Holding Arm, 5 000N Holding Force - Kukamet
Take advantage of a robust combination of secure holding and corrosion resistance for consistent clamping in jigs and fixtures. The galvanised finish and massive holding arm support a reliable 5,000 N holding capacity while the compact 117 mm arm and 90° mounting keep workflows efficient and space-saving. Order the clamp directly via Metav Werkzeuge or consult our advisors for selection guidance. Horizontal clamp 113 — 90° angle-foot clamp, galvanised, Kukamet The Horizontal clamp 113 is a 90° angle-mounted clamping device for secure workpiece retention in production jigs, fixture plates and assembly rigs Massive holding arm for increased rigidity Galvanised finish for corrosion protection 90° angle foot for space-saving mounting Holding force 5,000 N for robust clamping Stable clamping where precision matters The 113 model delivers a significantly higher retention capacity compared with light-duty fixtures, using a massive holding arm that resists deflection under load. With a rated holding force of 5,000 N and a maximum pressing force of 4,500 N, the clamp reduces rework and downtime by keeping components immobile during machining or assembly. Stated forces refer to static holding and pressing values and provide a clear basis for fixture design and process planning. Built for workshop durability and quick installation A galvanised finish gives extended corrosion resistance in workshop environments, lowering maintenance cycles and preserving contact geometry. The 90° angle foot mounting simplifies integration into fixture plates and T-slot tooling, while the 117 mm arm length provides clearance for many workpiece contours without increasing the overall footprint. These attributes combine to offer low-maintenance durability and straightforward mechanical fitment in repetitive production tasks. Compact weight and consistent handling for repetitive tasks Weighing 1.705 kg, the clamp balances solidity with manoeuvrability during fixture assembly and repositioning. The compact construction supports efficient storage and reduced handling effort in dynamic work environments. Designed for repetitive clamping operations, this unit is suitable for small to medium-sized jigs where stable, repeatable holding is required and space is at a premium. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Horizontal clamp 113 into your fixtures and benefit from local stock and expert selection at Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 113-5-D-C1 GTIN: 8680731501018 Manufacturer: Kukamet Facts Arm length: 117 mm Weight: 1.705 kg Holding force max: 5000 N Pressing force max: 4500 N Angle: 90° eClass: 21041719 ETIM: EC011973 Special features Mounting: angle foot Material: galvanised Massive holding arm Category: Spanner SKU: 113-5-D-C1 FAQ What materials is the clamp suitable for? The Kukamet Horizontal clamp 113 is a general-purpose fixture clamp; material compatibility depends on the overall fixture design rather than the clamp alone. How is the clamp mounted to fixture plates? Mounting is via the 90° angle foot; the design is intended for integration into plates, T-slots or welded brackets in jigs and assembly fixtures. What is the difference between holding force and pressing force? Holding force (5,000 N for this clamp) refers to the maximum retention capacity; pressing force (4,500 N) denotes the maximum load the clamping action can apply during engagement. Is the surface treatment suitable for humid environments? The galvanised finish provides enhanced corrosion resistance compared with bare steel, making the clamp suitable for typical workshop and light industrial conditions. Can the clamp be used in automated fixtures? Yes, the robust construction and consistent clamping values make the model appropriate for mechanical fixtures and automated jigs where repeatability is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 118mm Horizontal Clamp Massive Holding Arm, 2.5kN Clamping Force, Blackened Steel - Kukamet
Take advantage of a compact, lever-operated horizontal clamp that combines a massive holding arm, a 118 mm reach and a rated holding force of 2,500 N for reliable fixture work; order directly via Metav Werkzeuge or consult our product specialists for application support. 112 horizontal clamp — Kukamet, 118 mm arm, 2,500 N holding force A 112 horizontal clamp designed for fast, repeatable clamping in jigs, fixtures and assembly stations Massive holding arm for stable clamping 118 mm arm length Max holding force 2,500 N Vertical mounting foot for secure installation Consistent clamping for repetitive production The lever-action horizontal clamp delivers a repeatable holding force that simplifies fixture design and reduces cycle variability. With a maximum holding force of 2,500 N and an indicated pressing capacity of 2,300 N, the device secures workpieces reliably during machining, welding or inspection operations. The clearly specified forces allow engineers to calculate clamping loads and safety margins, ensuring process stability. The compact footprint and lever mechanism create a quick mechanical lock that eliminates the need for complex pneumatic systems while maintaining consistent part positioning. Built for workshop durability and precise positioning Constructed with a massive holding arm and finished in a blackened surface, the clamp resists wear and provides long service life in demanding environments. The 118 mm arm length offers practical reach for a wide range of panel thicknesses and tooling arrangements, while the 90° clamping angle supports low-profile fixtures. The robust build reduces deflection under load, which benefits tolerance-critical operations where small shifts can lead to scrap or rework. All components are designed to deliver mechanical stability and predictable behaviour across repeated cycles. Rapid installation and straightforward integration The clamp is supplied with a vertical mounting foot, enabling secure attachment to plates and fixture bases without additional adapters. The compact weight of 0.326 kg makes it simple to position and fasten, while the lever mechanism supports quick manual actuation for assembly-line workstations or hand-operated benches. Specified as a horizontal, lever-operated workholding device, this unit is suitable for retrofitting into existing jigs or for new fixture designs where space is limited and repeatability is essential. The straightforward mechanical concept reduces maintenance requirements and simplifies training for shop personnel. Contact Metav Werkzeuge today for advice on integrating the Kukamet 112 horizontal clamp into production or for availability details — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: B112-3-D-C2 GTIN: 8680731507249 Model: 112 Category: Clamp / Spanner Facts Arm length: 118 mm Clamping angle: 90° Max pressing force: 2,300 N Max holding force: 2,500 N Weight: 0.326 kg Materials and special features Material / finish: blackened (Schwarz brüniert) Mounting: vertical foot (senkrechter Fuß) Design: horizontal, lever-operated clamp Feature: massive holding arm FAQ What industries are suitable for this horizontal clamp? The Kukamet 112 horizontal clamp is suitable for general workshop, assembly and light machining environments where lever-operated, repeatable clamping is required; it is commonly used in fixtures on production lines and jigs. What clamping force can be expected in practice? Rated holding force for the 112 horizontal clamp is 2,500 N; this value describes the maximum static holding capacity under correct installation and is useful for calculating fixture safety margins. How is the clamp mounted to a fixture plate? Mounting is performed via the supplied vertical foot; the design allows secure fastening to base plates or fixture blocks for compact, low-profile installation. Is the finish corrosion-resistant for shop use? The clamp has a blackened finish (Schwarz brüniert) that reduces surface wear and offers basic protection for typical workshop conditions; additional surface protection can be applied if required for aggressive environments. Which SKU should be ordered for this model? Order the clamp under SKU B112-3-D-C2 (Kukamet 112 horizontal clamp) for the specified configuration and documented holding force. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 118mm Horizontal Clamp With Massive Arm, Safety Lock, 2.3kN Closing Force - Kukamet
Take advantage of the combination of a heavy‑duty holding arm, galvanised corrosion protection and a 2,300 N clamping capacity for reliable, repeatable fixture work; order the clamp directly from Metav Werkzeuge or consult our team for application advice. Horizontal Toggle Clamp 111 — horizontal clamp with 118 mm arm, galvanised finish (Kukamet) A Horizontal Toggle Clamp 111 engineered for secure horizontal clamping in jigs and fixtures, featuring a robust holding arm and a positive safety locking mechanism. Heavy-duty holding arm Safety locking mechanism Galvanised corrosion protection 118 mm arm length Up to 2,300 N clamping capacity Secure and consistent clamping for serial production The clamp delivers a defined clamping force of 2,300 N and a maximum holding force of 2,500 N, providing measurable performance for repeatable assembly and machining tasks. These figures describe the force applied during engagement and the static retention capacity respectively; both values support predictable fixture behaviour and reduce variation in process set‑ups. For production environments where cycle stability matters, the measurable force characteristics assist process control and shorten set‑up validation. Durable construction for long service life Constructed from galvanised components and fitted with a heavy‑duty holding arm, the design prioritises durability and corrosion resistance. The integrated safety lock secures the clamp in engaged position, preventing inadvertent release during handling or vibration. This combination reduces downtime caused by component replacement and supports a safer workplace where clamps remain reliably locked under load. Compact mounting and straightforward integration Fitted with a horizontal foot for direct base mounting and an 118 mm arm, the clamp integrates easily into compact jigs and fixture plates. At 0.3 kg it adds very little mass to assemblies while offering strong clamping performance, which simplifies retrofitting into existing tooling. The right‑angled (90°) actuation suits side‑loaded arrangements and saves bench space, enabling efficient layout in small to medium workshops. Confidence through traceable quality and supply Supplied by a trusted partner in the industrial market, the clamp benefits from Metav’s emphasis on accessible precision and consistent availability. Metav’s established logistics and quality filtering for the European market means reliable stock and documented product characteristics, supporting procurement certainty and lean supply chains. This creates peace of mind where tool reliability and supplier transparency are valued. Contact Metav Werkzeuge for technical selection of the Kukamet Horizontal Toggle Clamp 111 (SKU 111-3-D-L-C2) or for advice on integrating the unit into existing jigs — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: 111-3-D-L-C2 Manufacturer: Kukamet GTIN: 8680731500189 Facts Arm length: 118 mm Clamping force (max): 2,300 N Holding force (max): 2,500 N Angle: 90° Weight: 0.3 kg Special features Mounting: horizontal foot Material: galvanised Heavy‑duty holding arm Safety locking mechanism Compact design for jigs and fixtures FAQ What maximum clamping force does the clamp provide? The Kukamet Horizontal Toggle Clamp 111 offers a clamping capacity of 2,300 N and a holding force of 2,500 N (SKU 111-3-D-L-C2). Is the clamp suitable for workshop jigs exposed to humidity? Yes, the galvanised finish on the Horizontal Toggle Clamp 111 provides corrosion resistance suitable for typical workshop environments. How is the clamp mounted in a fixture? The unit uses a horizontal foot for base mounting, allowing direct attachment to plates and fixture boards for secure positioning. Can the clamp remain locked under vibration or handling? The incorporated safety locking mechanism secures the clamp in engaged position to reduce the risk of accidental release during vibration or handling. What are typical applications for this clamp? The clamp is designed for jigs, fixtures and assembly tooling where defined, repeatable horizontal clamping is required; consult Metav Werkzeuge for integration guidance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 118mm Horizontal Clamp With Solid Holding Arm And Safety Lock, 2.3kN Push Force, Galvanised - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines a massive holding arm, a reliable safety lock and measurable clamping power for consistent workholding. Benefit from straightforward integration into existing jigs and fixtures and order via Metav Werkzeuge or consult their technical advisors for application support. Kukamet Horizontal clamp 112 — zinc-plated horizontal clamp with safety lock The Horizontal clamp 112 is a compact horizontal clamping device with a vertical foot, intended for fixture and workholding tasks in workshops and light production environments. Massive holding arm with safety lock Zinc-plated for corrosion resistance 118 mm arm length for secure clamping Up to 2,500 N holding force Consistent clamping power for reliable fixtures The clamp delivers clearly defined force values, with a clamping force of 2,300 N and a holding force up to 2,500 N, which supports repeatable fixture results and reduces the need for constant retightening. These figures indicate the clamp’s capacity to resist displacement under load, making it suitable for assembly jigs, portable fixtures and repetitive positioning tasks. The numeric ratings provide an objective basis for selecting the correct device for common workshop applications. Robust construction to cut maintenance intervals A massive holding arm combined with a safety lock increases operational safety and minimizes accidental release during handling. The body is zinc-plated, offering corrosion resistance that prolongs service life in humid or mildly abrasive environments. The product’s compact design and sturdy components mean fewer service interventions and steady performance over many cycles, which contributes to predictable production throughput and lower total cost of ownership. Easy installation into existing setups with a vertical foot The clamp features a vertical foot mounting arrangement and a 118 mm arm, enabling straightforward retrofitting into existing jigs and tooling plates without extensive redesign. The 90° clamping angle provides secure lateral restraint where space is limited. Lightweight yet stable at approximately 0.3 kg, the device balances portability and rigidity, allowing flexible positioning across multiple fixtures while keeping system deadweight low. For practical clamping reliability choose the Kukamet 112 horizontal clamp and contact Metav Werkzeuge in Emmerich for tailored advice and supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 112-3-D-L-C2 GTIN: 8680731500530 Material: zinc-plated Mounting: vertical foot Angle: 90° Facts Arm length: 118 mm Clamping force (max): 2,300 N Holding force (max): 2,500 N Weight: 0.3 kg Special features Massive holding arm Safety lock Compact horizontal clamp design Category: clamp / spanner FAQ What clamping and holding forces does this clamp provide? The Kukamet Horizontal clamp 112 offers a clamping force of 2,300 N and a holding force of up to 2,500 N (SKU 112-3-D-L-C2), providing measurable performance for light to medium-duty fixtures. Can the clamp be mounted on standard fixture plates? Yes, the device uses a vertical foot mounting arrangement and a compact footprint that permits installation on common jigs and tooling plates without major modifications. Is the clamp suitable for use in humid or mildly corrosive environments? The zinc-plated finish provides corrosion resistance, so the clamp is appropriate for workshop conditions where increased surface protection is beneficial. How does the safety lock improve operation? The integrated safety lock prevents unintended release of the clamping arm during handling or vibration, enhancing operational safety and ensuring stable clamping in repetitive processes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 118mm Horizontal Clamp With Solid Holding Arm, 2.5 kN Holding Force, Zinc Plated - Kukamet
Compact, galvanised construction and a massive holding arm ensure sustained reliability and repeatable clamping with up to 2,300 N of applied force; the unit’s horizontal foot mounting makes it suitable for fixed jigs and fixtures. Order the Horizontalspanner 111 directly via Metav Werkzeuge or ask our consultants if needed. Horizontalspanner 111 — Horizontal clamp with 118 mm arm and galvanised finish by Kukamet The Horizontalspanner 111 is a robust horizontal clamp designed for secure workpiece fixation in machining, assembly and jig applications. Galvanised steel construction for corrosion resistance Massive 118 mm holding arm for secure clamping 2,300 N clamping force; 2,500 N holding capacity Durable construction for long service life The clamp’s galvanised steel body and reinforced components deliver corrosion resistance and low maintenance, which supports continuous workshop use. The massive holding arm provides rigidity where movement must be avoided during machining; this reduces rework and extends tool life. Designed for repeatable positioning, the construction balances solidity with manageable mass to keep fixtures straightforward to handle. Secure clamping that speeds production Engineered to produce up to 2,300 N of clamping force with a 2,500 N holding capacity, the device separates applied clamping force from holding capacity to ensure safety margins during operation. Clamping force refers to the force applied when the lever is engaged; holding capacity denotes sustained retention under load. The result is a measurable improvement in workpiece stability and a reduction in setup checks, supporting faster cycle times and more consistent quality. Simple mounting and adaptable use in fixtures Equipped with horizontal foot mounting and set at a 90° operating angle, the clamp integrates with standard fixture plates and jigs without complex adapters. The 118 mm arm reach offers access to workpieces while the 0.328 kg mass keeps the component compact and easy to position within confined assemblies. The lever-clamp mechanism gives an intuitive actuation method suitable for repetitive tasks on production benches and assembly lines. Contact Metav Werkzeuge for tailored supply of the Kukamet Horizontalspanner 111 and technical advice from the Emmerich team Technical data Article number: 111-3-D-C2 GTIN: 8680731500158 Brand: Kukamet Model: 111 Category: Spanner Facts Arm length: 118 mm Clamping force (max): 2,300 N Holding capacity (max): 2,500 N Weight: 0.328 kg Angle: 90° Special features Material: galvanised steel Mounting: horizontal foot mounting Massive holding arm Lever clamp design Compact, lightweight construction FAQ What is the maximum clamping force of this horizontal clamp? The Kukamet Horizontalspanner 111 delivers a maximum clamping force of 2,300 N and a holding capacity rated at 2,500 N. How long is the clamping arm and what does that mean for fixture design? The arm length is 118 mm, which provides adequate reach for many jigs and fixtures while keeping the clamping footprint compact for tight assemblies. Which mounting method does the clamp use? The device features a horizontal foot mounting, allowing direct attachment to fixture plates and base plates at a 90° orientation. What material is the clamp made from and how does this affect maintenance? The clamp is made from galvanised steel; this finish improves corrosion resistance and reduces routine maintenance in workshop environments. Is the Horizontalspanner 111 suitable for repetitive production use? Yes, the lever-clamp design and robust holding arm make the Horizontalspanner 111 well suited to repetitive clamping tasks in production and assembly contexts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 1200 N Horizontal Clamp, M6x40 Spindle, Blackened Finish - Kukamet
Take advantage of a compact, right‑angle design combined with a 1,200 N holding force and a 1,000 N operating force to secure fixtures reliably while keeping setup time low. Order the clamp directly via Metav Werkzeuge or contact the consultants for specification matching and delivery options. Horizontalspanner 113 — Horizontal clamp with angled base, 90° lever design (Kukamet) The Horizontalspanner 113 is a compact horizontal clamp designed for right‑angle fixtures and repeatable clamping tasks in jigs and workholding systems. Compact horizontal clamp with angled base Holding force up to 1,200 N Operating force up to 1,000 N M6x40 pressure spindle for fine adjustment Secure right‑angle clamping for reliable production The lever clamp delivers a dependable right‑angle solution where repeatability matters. With a holding force of 1,200 N and an operating force of 1,000 N, the device secures workpieces during machining, assembly and inspection operations, reducing the risk of movement under load. The integrated M6x40 pressure spindle enables precise contact pressure and compensates for minor height differences, so fixtures remain consistent part after part. This combination of repeatable clamping and fine adjustment supports a steady production flow and shorter cycle times. Space‑saving, low‑mass design that eases fixture planning Engineered with a compact footprint and a weight of 0.27 kg, the clamp keeps added mass on moving fixtures to a minimum and facilitates retrofitting into tight jigs. The angled base (Winkelfuß) allows mounting at a 90° orientation without complex adapter plates, simplifying fixture design and lowering tooling costs. A blackened finish provides basic surface protection and a professional appearance suitable for busy shop floors, while the lever mechanism offers quick engagement and disengagement for efficient handling. Practical benefits for everyday workshop use The clamp is suited to repetitive clamping tasks in small series and prototyping environments where robust, predictable behaviour is required. The straightforward construction and defined clamping geometry make set‑up intuitive for technicians and engineers, helping to avoid trial‑and‑error adjustments. Supplied as a compact unit with the M6x40 pressure spindle, the model identified as B113-2 is easy to integrate into existing fixture plates or modular tooling systems and supports consistent part quality across runs. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet horizontal clamp B113-2 into fixtures, or request a quotation via +49 2822 7131930 / info@metav-werkzeuge.com Technical Data SKU: B113-2 GTIN: 8680731507393 Weight: 0.27 kg Material: blackened finish Mounting: angled base (Winkelfuß) Angle: 90° Pressure spindle: M6x40 Max holding force: 1,200 N Max operating force: 1,000 N Manufacturer: Kukamet Core technical data Article class: 21041719 (eClass) ETIM: EC011973 Special features Lever clamp design (hebelspanner) Compact footprint for tight fixtures Fine adjustment via pressure spindle Lightweight for minimal added mass FAQ What is the maximum holding force of this clamp? The Kukamet Horizontalspanner 113 (SKU B113-2) provides a maximum holding force of 1,200 N, suited to many light‑to‑medium fixture tasks. How is the clamp mounted in a fixture? Mounting is via an angled base (Winkelfuß) designed for 90° orientation, enabling direct installation in right‑angle jigs and tooling setups. Which pressure spindle is included and what does it do? The clamp includes an M6x40 pressure spindle that allows fine adjustment of contact pressure and compensation for small height variances in the workpiece. Is the clamp suitable for retrofitting existing plates? Yes, the compact design and standard fixing approach make the clamp convenient for retrofitting into existing fixture plates and modular tooling systems. Who supplies this product and where can specifications be confirmed? The clamp is supplied under Kukamet; for detailed specifications or integration advice, Metav Werkzeuge can provide technical guidance and order handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 1200 N Pneumatic Clamp With Massive Holding Arm, Zinc Plated - Kukamet
Robust vertical mounting, galvanised corrosion resistance and repeatable clamping force ensure dependable fixture performance; order the Pneumatic clamp 652 directly via Metav Werkzeuge or request integration advice from our consultants. Pneumatic clamp 652 — Vertical-foot pneumatic lever clamp with 62 mm arm by Kukamet The Pneumatic clamp 652 is a compact, vertical-foot pneumatic lever clamp designed for repetitive clamping in production fixtures and workshop jigs. Vertical base for stable mounting 62 mm robust holding arm Up to 1,400 N holding force Galvanised construction resists corrosion Consistent clamping for production workflows The 652 model delivers a dependable, repeatable hold designed for short cycle production and fixture use. The vertical foot keeps the footprint compact while permitting secure attachment to benches or plates. The 62 mm arm provides sufficient reach for common workpieces without compromising rigidity, and the massive holding arm reduces deflection during clamping. This combination supports stable cycle times and reduces rework by keeping parts accurately positioned throughout machining or assembly operations. Engineered force and wear resistance Designed with industrial duty in mind, the clamp provides a max. clamping force of 1,200 N and a max. holding force of 1,400 N, values that allow reliable fixation of medium-sized components. The body is galvanised, offering corrosion protection that extends service life in workshop environments. The pneumatic actuation reduces operator effort and enables consistent force application, which improves process reliability compared with manual toggles and helps maintain quality across repeated cycles. Simple integration into fixtures and tooling Mounting is performed via the vertical base, which simplifies alignment in modular fixturing systems and saves space on the tooling plate. The 90° lever orientation supports common clamping geometries and streamlines actuation paths in automated setups. The compact design and standard interface make the clamp suitable for retrofit into existing jigs or as part of new fixture concepts, supporting fast commissioning and predictable performance in serial production. Practical benefits for workshop and industrial use By combining a robust arm, clear force ratings and a galvanised finish, this clamp reduces downtime related to part slippage and corrosion-related maintenance. The pneumatic actuation contributes to ergonomic operation and consistent outcomes across shifts. For procurement strategies that favour long service intervals and predictable fixture behaviour, the 652 offers a balance of durability and straightforward installation that supports efficient production logistics. Contact Metav Werkzeuge for project-specific advice on integrating the Kukamet 652 into fixturing systems and to request item SKU 652-2-D-C1 for delivery and scheduling Technical data Article number: 652-2-D-C1 Product name: Pneumatic clamp 652 Manufacturer: Kukamet Core technical data Arm length: 62 mm Max. clamping force: 1,200 N Max. holding force: 1,400 N Angle: 90° eCl@ss: 21021004 ETIM: EC011973 Special features Material: galvanised Mounting: vertical foot Massive holding arm Application: lever clamp Mass-produced part suitable for fixtures FAQ What clamping forces can be expected from this clamp? The Kukamet Pneumatic clamp 652 delivers a maximum clamping force of 1,200 N and a holding force up to 1,400 N, offering stable fixation for typical workshop components. How is the clamp mounted to a fixture plate? Mounting is performed via the vertical foot arrangement; the vertical base ensures a compact attachment and simple alignment in modular fixtures. Is the surface treatment suitable for workshop environments? Yes, the body is galvanised, giving corrosion resistance that prolongs service life under standard workshop conditions. Can the clamp be used in automated cycle applications? The pneumatic actuation and repeatable lever geometry make the 652 model suitable for automated or semi-automated production where consistent clamping cycles are required. Which SKU should be ordered for this configuration? Order item SKU 652-2-D-C1 for the described configuration of the Kukamet Pneumatic clamp 652. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 1200 N Pneumatic Clamp With Massive Holding Arm, Zinc-Plated, Vertical Base - Kukamet
Robust clamping with a 112 mm holding arm and a galvanised finish delivers dependable performance; the vertical-foot, 90° pneumatic design provides up to 1,400 N holding force while the actuator generates 1,200 N of operating force. Order the clamp directly via Metav Werkzeuge or consult our advisors for application support. Pneumatic clamp 652 — vertical-foot, galvanised lever clamp with 1,400 N holding force (Kukamet) A Pneumatic clamp 652 designed for 90° fixtures, combining a massive holding arm with vertical-foot mounting for secure, repeatable clamping in production and jig assemblies. Robust 112 mm holding arm Galvanised corrosion-resistant finish Vertical-foot mounting at 90° angle Up to 1,400 N holding force Consistent clamping where it matters The clamp is built for repetitive, industrial use: a massive holding arm and a 112 mm reach reduce deflection under load, maintaining part position through machining or assembly operations. The galvanised surface protects against humidity and oil while preserving sliding surfaces, so the fixture requires less frequent replacement. This construction supports stable process capability and reduces scrap rates in continuous production environments. Efficient force transmission for faster cycles An air-operated lever clamp converts the actuator's power into a reliable clamping force: the actuator delivers a 1,200 N actuating force, translated by the mechanism to a 1,400 N holding force, which secures components without excessive overpressure. The simple force relationship allows predictable set-up for cycle planning and tooling design, improving throughput while keeping energy consumption moderate compared with oversized pneumatic systems. Simple integration into existing fixtures Designed for vertical-foot mounting at a 90° orientation, the clamp fits common jig plates and fixture blocks without complex adaptors. The compact mounting footprint helps when space is limited and supports consistent repeatability across multiple stations. The lever-style actuation is compatible with standard pneumatic controls, enabling straightforward retrofits and reducing engineering time during line changes. Durable design and low-maintenance operation The galvanised finish and robust mechanical parts mean a long service life under normal workshop conditions, lowering total cost of ownership through reduced downtime. The massive arm and straightforward construction simplify inspection and maintenance tasks, allowing planned lubrication and wear checks rather than frequent unexpected repairs. For workshops and production lines seeking reliability, this clamp delivers predictable performance over many cycles while supporting compliance with industrial process requirements. Contact Metav Werkzeuge today to specify the Kukamet Pneumatic Clamp 652 for your fixture or request technical advice from our consultants at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 652-2-D-C2 Brand: Kukamet ECLASS: 21021004 ETIM: EC011973 Facts Arm length: 112 mm Angle: 90° Max actuating force: 1,200 N Max holding force: 1,400 N Special features Galvanised finish Vertical-foot mounting Massive holding arm Lever-style pneumatic clamp Category: Spanner FAQ What is the maximum holding force of this clamp? The pneumatic clamp 652 provides a maximum holding force of 1,400 N, derived from a 1,200 N actuator and the mechanism’s leverage. How is the clamp mounted in a fixture? Mounting is via a vertical foot at a 90° angle; the Kukamet clamp 652 is made for direct installation on jig plates and fixture blocks. Is the finish suitable for humid or oily workshop environments? Yes, the galvanised surface on the Pneumatic clamp 652 resists corrosion and extends service life in typical workshop conditions. Can this clamp be used for automated production lines? The lever-style, air-operated design of the Kukamet Pneumatic clamp 652 is compatible with standard pneumatic control systems and suits automated or semi-automated stations. What makes this clamp low maintenance? A robust arm and simple mechanical layout reduce wear points; the galvanised finish and accessible mounting lower the frequency of preventive maintenance for the clamp. Manufacturer: Kukamet Fevzi Çakmak Mah. 10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 1200 N Pneumatic Clamp With Vertical Base, Massive Holding Arm, Galvanised - Kukamet
Take advantage of a robust, galvanised clamp that combines high holding capacity with a compact arm for dependable fixturing in production. Order the Pneumatic clamp 651 via Metav Werkzeuge or consult the Metav team for integration advice. Pneumatic clamp 651 – Vertical-foot mounting with 1,400 N holding force (Kukamet) The Pneumatic clamp 651 is a 90° lever-style pneumatic clamp designed for secure, repeatable workholding in workshop fixtures and production jigs. Galvanised steel construction 1,400 N maximum holding force 162 mm solid holding arm Vertical-foot mounting, 90° clamping angle Consistent clamping for series production The pneumatic actuation of this lever-style clamping unit delivers a reproducible closing action with an actuation force of 1,200 N and a sustained holding force of 1,400 N, enabling consistent part location across repetitive cycles. This predictability reduces rework and scrap by maintaining clamping pressure within narrow tolerances, which is particularly beneficial in medium- to high-volume machining or assembly operations. The driven mechanism is suitable for integration into automated sequences where cycle stability and repeatability are priorities. Rigid build for vibration-free machining Constructed from galvanised material and fitted with a solid holding arm of 162 mm, the clamp provides mechanical stiffness that resists movement during cutting or pressing processes. The 90° clamping orientation and vertical-foot mounting create a compact footprint while ensuring the clamp’s reaction forces are reliably transferred into the fixture or machine table. For customers requiring firm anchorage during demanding operations, the robust arm and mounting arrangement lower the risk of component shift and improve surface finish quality. Designed for straightforward fixture integration The lever-style pneumatic design simplifies installation into existing tooling setups: the vertical-foot base allows direct attachment to fixture plates or machine beds without complex adapters, while the pneumatic supply provides rapid, low-effort actuation. The unit’s mechanical layout supports short cycle times and reduced manual handling in assembly or welding stations. Specification-conscious buyers will appreciate the clear force ratings and compact arm length, which aid in positioning the clamp where it supports both accessibility and effective part restraint. Durable, low-maintenance performance A galvanised finish offers corrosion resistance that prolongs service life in workshop environments. Pneumatic operation minimises wear-prone mechanical actuation components, translating into fewer maintenance intervals and lower lifecycle disruption. The solid construction and clear force ratings simplify preventative maintenance planning and spare-parts management, supporting long-term uptime and reliable supply to production lines. For operations focused on steady throughput, the combination of durability and simple pneumatic control promotes operational continuity. Discuss integration and procurement with Metav Werkzeuge to secure the Kukamet Pneumatic clamp 651 for reliable, repeatable fixturing in production; Metav’s specialists can advise on mounting and system compatibility. Technical Data Article number: 651-2-D-C3 Manufacturer: Kukamet Product name: Pneumatic clamp 651 Facts Arm length: 162 mm Actuation (max) force: 1,200 N Holding force (max): 1,400 N Clamping angle: 90° Special features Material: galvanised Mounting: vertical-foot Solid holding arm Lever-style pneumatic clamp eClass: 21021004 ETIM: EC011973 FAQ What clamping forces can be expected from this clamp? The Kukamet Pneumatic clamp 651 provides an actuation force of 1,200 N and a maximum holding force of 1,400 N, suitable for a range of medium-duty fixturing tasks. Is the clamp suitable for integration into automated fixtures? Yes, the lever-style pneumatic actuation of the 651 is intended for easy integration into automated jigs and production lines where repeatable, fast clamping is required. How is the clamp mounted to a fixture or machine table? The unit uses a vertical-foot mounting arrangement that allows direct bolting to fixture plates or machine beds for a compact, stable installation. What material is used and how does it affect durability? The clamp is galvanised, which offers corrosion resistance and contributes to a longer service life under typical workshop conditions. Which model and SKU should be ordered for this specification? Order the Kukamet Pneumatic clamp 651, SKU 651-2-D-C3, for the specified arm length and force ratings. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 1200 N Pneumatic Clamp With Vertical Handle And Heavy-Duty Arm, Galvanised - Kukamet
Benefit from the combination of 1,200 N actuation force, galvanised durability and a 112 mm solid holding arm for dependable fixture performance; order the Kukamet 651 pneumatic clamp directly via Metav Werkzeuge or consult our specialists for application advice. Kukamet 651 Pneumatic clamp — vertical-handle design, 112 mm holding arm The 651 is a pneumatic clamping unit for production fixtures and workshop jigs, engineered for vertical-foot mounting and reliable, repeatable clamping in assembly and machining applications Galvanised construction for durable use Vertical handle and solid holding arm 1,200 N actuation force, 1,400 N holding force Vertical-foot mounting at 90° for compact fixtures Secure clamping that keeps production moving The pneumatic clamping unit delivers 1,200 N actuation force and a maximum 1,400 N holding force, providing secure workholding for repeatable operations. High clamping and holding figures translate into reduced slippage and fewer reworks, which supports consistent cycle times and better overall equipment effectiveness. Where repeatability and fixture stability are critical, the robust force ratings ensure components remain stationary during machining, assembly or inspection. Robust materials and construction for low maintenance Constructed from galvanised steel with a massive holding arm, the device is designed to resist corrosion and mechanical wear in industrial environments. The substantial 112 mm arm length increases leverage and contact area while reducing flex under load. This combination of materials and geometry reduces maintenance intervals and prolongs service life, lowering total cost of ownership through fewer replacements and less unplanned downtime. Space-saving mounting for compact fixture design The 90° orientation and vertical-foot mounting allow the clamp to be integrated into tight jigs and tooling plates without compromising accessibility or component clearance. The vertical handle orientation keeps the actuator clear of the work envelope, enabling denser fixture layouts and simpler part loading. This makes the clamping unit suitable for both manual and automated handling stations where floor space and fixture real estate are at a premium. Pneumatic actuation for fast, repeatable cycles and safe operation Pneumatic actuation provides repeatable cycles with rapid response, making the unit suitable for high-throughput environments. The vertical handle and solid arm geometry aid safe interaction during loading and unloading, while the pneumatic drive reduces operator effort compared with manual lever clamps. For customers seeking consistent cycle rates and reliable clamping across batch production, the Kukamet 651 represents a practical balance of durability and operational speed. Contact Metav Werkzeuge for specification support and ordering of the Kukamet 651 pneumatic clamp — call +49 2822 7131930 or email info@metav-werkzeuge.com for delivery from Emmerich Technical data Article number: 651-2-H-D-C2 Brand: Kukamet Model: 651 Type: Pneumatic clamp Classification: eClass 21021004 ETIM: EC011973 Facts Arm length: 112 mm Actuation force max: 1,200 N Holding force max: 1,400 N Angle: 90° Special features Vertical handle Massive holding arm Vertical-foot mounting Material: galvanised FAQ How is the clamp mounted to a fixture? The Kukamet 651 pneumatic clamp is secured via a vertical-foot mounting arrangement, allowing installation at a 90° orientation to suit compact jigs and tooling plates. What forces can be expected in operation? Rated actuation is 1,200 N with a maximum holding force of 1,400 N; these figures describe the typical clamping and retention performance of the Kukamet 651 pneumatic clamp. Is the clamping unit suitable for harsh workshop environments? Yes, the unit’s galvanised construction and massive holding arm are intended to increase resistance to corrosion and wear in industrial settings. Can the clamp be used in automated stations? Pneumatic actuation and rapid, repeatable cycles make this clamp suitable for integration into automated or semi-automated production lines. What is the exact product identifier for ordering? Order or reference the clamp using SKU 651-2-H-D-C2 for the Kukamet 651 pneumatic clamp when contacting Metav Werkzeuge. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 1200 N Pneumatic Clamp, Massive Holding Arm, Galvanised - Kukamet
Taking advantage of its 1,200 N clamping force and galvanised, heavy-duty arm, this pneumatic clamp ensures reliable, repeatable workholding with minimal upkeep. The robust 112 mm reach and vertical-base mounting support stable fixture integration for production and jig applications. Order the Pneumatic clamp 651 directly via Metav Werkzeuge or ask our consultants if needed. 651 Pneumatic clamp by Kukamet — vertical base, 1,200 N clamping force The 651 Pneumatic clamp is a lever-style workholding device designed for secure, repeatable clamping in production fixtures and workshop jigs using a vertical base mounting. Massive holding arm, 112 mm reach Vertical base for stable mounting Galvanised steel construction resists corrosion Max. clamping force 1,200 N; holding force 1,400 N Consistent, measurable clamping for production use The pneumatic lever design delivers a clearly defined clamping force that stabilises components during machining and assembly. With a rated clamping force of 1,200 N and a separate holding force of 1,400 N, the device provides a reliable force balance that reduces variances between cycles and supports repeatable positioning. The 112 mm reach of the heavy-duty arm allows secure engagement with a wide range of workpieces, while the vertical-base mounting simplifies integration into stands and fixtures. This performance-oriented configuration supports efficient production workflows by reducing rework and setup time. Durable construction lowers maintenance and downtime Constructed from galvanised steel with a massive holding arm, the clamp is designed to withstand workshop conditions and limit corrosion effects on moving parts. Galvanisation forms a protective zinc layer that reduces surface oxidation and extends service intervals, helping to keep maintenance effort low. The robust mechanical components of the lever mechanism resist wear, which contributes to a longer lifecycle and dependable operation in repetitive tasks. These properties combine to support stable uptime and predictable tool behaviour across extended production runs. Easy integration into jigs, fixtures and automation The lever clamping principle and a 90° locking angle enable compact, space-efficient mounting and quick actuation within bespoke fixtures. The vertical-base mounting offers a stable footprint for bolting the clamp to plates or subframes, simplifying alignment in modular tooling systems. Because the unit operates pneumatically, it can be incorporated into semi-automated stations or manual workbenches where rapid, repeatable clamping cycles are required. The simple mechanical interface and standard mounting orientation make the clamp suitable for retrofits as well as new installations, supporting faster project implementation. Discuss specification and delivery with Metav Werkzeuge to configure the Kukamet 651 Pneumatic clamp for the intended fixture or production cell and arrange supply from Emmerich. Technical data SKU: 651-2-D-C2 Name: Pneumatic clamp 651 Manufacturer: Kukamet Facts Arm length: 112 mm Clamping force (max): 1,200 N Holding force (max): 1,400 N Locking angle: 90° Special features Vertical base mounting Galvanised material Massive holding arm Lever clamp type FAQ What maximum clamping force does this clamp provide? The Kukamet 651 Pneumatic clamp (SKU 651-2-D-C2) provides a maximum clamping force of 1,200 N and a holding force rated at 1,400 N. Is the clamp suitable for heavy-duty workshop environments? Yes, the galvanised construction and massive holding arm make the unit appropriate for robust workshop use, offering improved resistance to corrosion and reduced wear. How is the clamp mounted in a fixture? The unit is supplied for vertical-base mounting, allowing bolting to plates or subframes and straightforward integration into jigs and modular tooling. Can the 651 be integrated into semi-automated stations? The pneumatic actuation and lever-style mechanism enable integration into semi-automated or manual stations where consistent, repeatable clamping cycles are required. What maintenance is required to keep the clamp reliable? Regular inspection of the lever mechanism and pneumatic connections is recommended; the galvanised finish reduces corrosion-related maintenance and supports long-term reliability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 1200 N Pneumatic Vertical Base Clamp Without Handle, Zinc Coated, 1400 N Retaining Force - Kukamet
Take advantage of reliable pneumatic actuation, a compact vertical-foot design and corrosion-resistant galvanised construction to secure fast, reproducible clamping cycles. Order the clamp directly via Metav Werkzeuge or ask the consultants for application advice. Pneumatikspanner 651 — Pneumatic toggle clamp with 1,200 N actuation (Kukamet) The Pneumatikspanner 651 is a pneumatic toggle clamp designed for secure, repeatable holding in assembly and machining fixtures; suited to vertical-foot mounting and 90° clamping applications Galvanised steel construction for durability 1,200 N pneumatic actuation force 90° clamping angle for vertical mounting Compact 0.57 kg body reduces fixture load Consistent clamping performance for high-throughput production The Pneumatikspanner 651 delivers a controlled pneumatic actuation that translates to 1,200 N of clamping force and a holding force of 1,400 N, ensuring stable workpiece retention during machining and assembly operations. This level of repeatable force reduces the need for readjustment and lowers scrap rates, which benefits production efficiency and quality control. The pneumatic mechanism provides short cycle times and consistent force application, making the clamp suitable for automated or semi-automated fixtures where process stability is critical. Space-saving design that fits into compact fixtures A compact unit mass of 0.57 kg combined with a vertical foot mounting option and a 90° clamping angle allows the clamp to be integrated into confined tooling layouts with minimal modification. The galvanised finish offers basic corrosion resistance, extending service life in standard workshop environments. The absence of a manual handle minimises interference in tight assemblies and prevents inadvertent actuation, which is advantageous in densely packed jigs and when multiple clamps operate in close proximity. Simple integration and low-maintenance operation The pneumatic toggle configuration simplifies connection to existing compressed-air systems and supports standard pneumatic control hardware for synchronized operation. The compact construction and zinc-coated surfaces require only routine inspection and basic cleaning; there are no elaborate user-servicing procedures. Installation uses the vertical base for secure fastening to tooling plates or fixture blocks, and compatibility with common clamping arrangements makes commissioning straightforward. The result is a dependable clamp that keeps downtime and maintenance effort to a minimum while supporting continuous production. Contact Metav Werkzeuge for tailored application guidance on Kukamet pneumatic clamps—call +49 2822 7131930 or email info@metav-werkzeuge.com to arrange supply from Emmerich and ensure the right configuration for the task Technical data SKU: 651-2 GTIN: 8680731503081 Manufacturer: Kukamet Facts Max actuation force: 1,200 N Max holding force: 1,400 N Weight: 0.57 kg Clamping angle: 90° Mounting: vertical foot eCl@ss: 21021004 ETIM: EC011973 Special features Material: galvanised Without handle Pneumatic toggle clamp Category: Spanner FAQ What is the maximum clamping force of this clamp? The Pneumatikspanner 651 provides a pneumatic actuation force of 1,200 N and a maximum holding force of 1,400 N for secure retention during machining and assembly. Can the clamp be mounted in confined fixtures? Yes, the compact design and vertical-foot mounting of the pneumatic toggle clamp make it suitable for integration into tight tooling layouts and stacked fixture arrangements. Is the surface finish suitable for workshop environments? The galvanised construction on the Pneumatikspanner 651 offers basic corrosion resistance appropriate for standard workshop and industrial environments. Does the clamp require a manual handle for operation? This model is supplied without a manual handle; the pneumatic actuation is intended for use with compressed-air control systems or automatic fixture controls. What maintenance does the clamp need? Routine inspection, cleaning and verification of pneumatic connections are sufficient; the clamp’s simple construction avoids complex maintenance procedures and supports long service intervals. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 129mm Horizontal Clamp Heavy-Duty Lever Clamp, 4 500N Thrust / 5 000N Hold, Galvanised - Kukamet
Take advantage of the robust galvanised construction, the massive holding arm and the clear mounting option with a vertical foot for dependable fixture performance; order directly via Metav Werkzeuge or ask our consultants for application advice. Horizontal clamp 112 — lever-operated horizontal clamp with massive holding arm and 5,000 N holding force (Kukamet) The Horizontal clamp 112 is a lever clamp designed for fixture and jig use in workshops and production, featuring a vertical foot for stable mounting and a 90° clamping angle for precise positioning. Massive holding arm for high rigidity Vertical foot mount for secure installation Galvanised steel construction for corrosion resistance 5,000 N maximum holding force for heavy-duty clamping Consistent clamping performance for repetitive production The robust lever-operated design provides reliable, repeatable clamping cycles suited to short-run and batch production. With a maximum holding force of 5,000 N and a corresponding pressing force of 4,500 N, the unit secures components without the need for constant readjustment. The clamping behaviour is predictable and measurable, which simplifies fixture design and minimises setup time on the shop floor. Built to reduce maintenance and withstand workshop conditions Constructed from galvanised steel, the clamp resists corrosion in workshop environments and requires minimal upkeep. The massive holding arm increases stiffness under load, lowering the risk of deformation and reducing downtime for replacements. At 1.385 kg, the assembly is sturdy yet manageable for retrofitting into existing jigs, helping to extend the life of fixtures while keeping handling straightforward. Simple integration into production jigs and tooling plates The clamp’s vertical foot mount allows direct attachment to baseplates and tooling fixtures, keeping the clamping plane aligned at 90° for consistent locating. An arm length of 129 mm provides good leverage and reach for a variety of workpiece geometries. The compact footprint and predictable kinematics of the mechanism make it suitable as a primary hold-down in dedicated fixtures or as part of modular clamping systems. Clear specifications for engineering and procurement All essential technical characteristics are stated in measurable terms to support selection and documentation: holding force, pressing force, mounting type, and material finish. The clamp is ideal where stable, long-lasting clamping is required without elaborate maintenance procedures. For procurement and CAD planning, the unit’s SKU and identifiers are provided in the technical data below to ensure correct ordering and traceability. For robust, repeatable clamping choose Kukamet’s Horizontal clamp 112 — contact Metav Werkzeuge for delivery options and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 112-5-D-C1 GTIN: 8680731500653 Manufacturer: Kukamet Specifications Maximum holding force: 5,000 N Maximum pressing force: 4,500 N Arm length: 129 mm Clamping angle: 90° Weight: 1.385 kg eClass: 21041719 ETIM: EC011973 Materials & features Material: galvanised steel Mounting type: vertical foot Massive holding arm: yes Design: lever-operated horizontal clamp Category: clamps (Spanner) FAQ What clamping forces does the Horizontal clamp 112 provide? The Horizontal clamp 112 from Kukamet delivers a maximum holding force of 5,000 N and a pressing force of 4,500 N, suitable for heavy-duty fixture tasks. Can the clamp be mounted on tooling plates with existing holes? Yes, the vertical foot mounting is intended for secure attachment to baseplates and jig surfaces; the robust foot improves repeatability when integrated into fixture plates. Is the finish suitable for humid workshop environments? The clamp features a galvanised steel finish that offers corrosion resistance, making it appropriate for standard workshop and production conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 129mm Horizontal Clamp With Massive Holding Arm And Safety Lock, Zinc-Plated 4.5kN Pressure - Kukamet
Robust, compact and corrosion-resistant: benefit from the combination of high holding capacity, a galvanised finish and a compact 129 mm arm for secure fixture clamping in confined workstations. Order this clamp directly via Metav Werkzeuge or ask our consultants for specification support. Horizontal clamp 111 by Kukamet — 90° lever, galvanised finish The 111 horizontal clamp is a compact lever clamping solution for workshop and production fixtures, designed for horizontal-base mounting and medium-duty applications. Heavy-duty 129 mm holding arm 5,000 N maximum holding force 4,500 N maximum clamping force Galvanised finish for corrosion resistance Secure clamping where space is limited The compact lever design provides a small footprint while maintaining a 129 mm reach, making the clamp suitable for confined jigs and fixture arrays. The horizontal-base configuration ensures stable attachment to machine tables and fixture plates, reducing the need for frequent repositioning. Thanks to the robust arm construction, set-up time is shortened and repeatable positioning is supported, which improves cycle-time consistency on small-batch production runs. Reliable force ratings for consistent fixtures Rated at 4,500 N clamping force and 5,000 N holding force, the unit delivers predictable performance under load. Clamping force denotes the pressure applied to the workpiece during actuation, while holding force indicates the resistance to displacement once engaged; both values are essential when designing a fixture to prevent movement during machining or assembly. The clear specification allows planners to match the clamp to fixture requirements and avoid over- or under-sizing, helping to reduce rework and downtime. Corrosion protection and safe operation prolong service life A galvanised surface finish provides corrosion resistance for workshop environments, while the integrated safety lock prevents unintended release under vibration or impact. The lever actuates to a defined 90° position and the overall unit remains lightweight at approximately 1.4 kg, which eases handling during assembly of multiple clamps. These features combine to deliver a durable solution that lowers total cost of ownership by extending maintenance intervals and supporting safe, reliable operation. Choose Kukamet's compact 90° lever clamp for dependable fixture retention — contact Metav Werkzeuge for technical advice or to reserve stock at our Emmerich warehouse: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: 111-5-D-L-C1 GTIN: 8680731500349 Manufacturer: Kukamet Facts Arm length: 129 mm Angle: 90° Maximum clamping force: 4,500 N Maximum holding force: 5,000 N Weight: 1.4 kg eClass: 21041719 ETIM: EC011973 Special features Galvanised material Massive holding arm Safety lock Horizontal base mounting Lever clamp design FAQ What mounting arrangement does the clamp require? The clamp is designed for horizontal base mounting; the horizontal foot provides a stable attachment point for machine tables and fixture plates. Can the clamp withstand workshop conditions and moisture? Yes, the galvanised finish gives corrosion resistance suitable for typical workshop environments and helps to extend service life. What is the difference between clamping force and holding force? Clamping force (4,500 N for this unit) is the applied force during actuation; holding force (5,000 N) is the resistance to displacement once engaged, relevant for fixture stability. Is this clamp suitable for automated fixtures or manual jigs? Its compact lever form and reliable safety lock make it suitable for both manual jigs and many automated or semi-automated fixture applications where the specified forces meet process requirements. Which item code identifies this clamp for ordering? Order using SKU 111-5-D-L-C1; the clamp is supplied by Kukamet and distributed through Metav Werkzeuge. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 129mm Horizontal Clamp With Solid Arm And Safety Lock, 5 000 N Holding Force - Kukamet
Take advantage of the combination of high holding power, a 129 mm robust arm, and a secure safety lock for consistent fixture performance. Order the Horizontal clamp 112 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 112 — horizontal lever clamp with 5,000 N holding force and 129 mm arm (Kukamet) The Horizontal clamp 112 is a compact horizontal lever clamp designed for jigs, fixtures and repetitive workholding where reliable 90° locking and vertical-foot mounting are required. 5,000 N maximum holding force 4,500 N clamping force 129 mm robust support arm Vertical-foot mounting, 90° locking Reliable clamping where repeatability matters The clamp combines a high holding force with a compact footprint to secure components during machining or assembly. The separation between clamping force (4,500 N) and holding force (5,000 N) ensures the fixture resists release under load, reducing rework and downtime. With a 129 mm support arm and a locking angle of 90°, the device stabilises workpieces accurately in repeat processes. The blackened finish contributes to wear resistance and a professional workshop appearance. Built for secure, long-term operation A massive support arm and a positive safety lock reduce the risk of accidental release and support continuous production use. The vertical-foot mounting simplifies integration into standard fixture plates and dedicated tooling plates without additional adapters. At 1.42 kg, the unit balances rigidity with manageable mass for modular fixture construction. Components subject to frequent clamping cycles benefit from the robust mechanical design and the clear distinction between temporary clamping and permanent holding states. Easy integration and straightforward maintenance The horizontal lever design allows fast actuation and straightforward placement in lean production setups. The mounting style and compact dimensions enable multiple clamps to be arranged closely for complex workholding tasks, improving cycle efficiency. Routine inspection focuses on the lever pivot and lock engagement; lubrication intervals are dictated by operating conditions. Technical teams will appreciate the clear specification of holding and clamping forces, which permits rapid calculation of required clamping layouts for both manual and automated cells. For reliable industrial workholding through Kukamet’s proven lever technology, request supply and advice from Metav Werkzeuge — contact Metav Werkzeuge for ordering and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: B112-5-D-L-C1 Manufacturer: Kukamet Weight: 1.42 kg Arm length: 129 mm Angle: 90° Mounting: vertical foot Facts Maximum clamping force: 4,500 N Maximum holding force: 5,000 N Special features Massive support arm Safety lock for secure holding Blackened finish Horizontal lever clamp design FAQ What holding and clamping forces does this clamp provide? The Horizontal clamp 112 offers a maximum holding force of 5,000 N and a clamping force of 4,500 N, allowing clear distinction for fixture design. Is a safety lock included with the clamp? Yes, the unit features a mechanical safety lock and a massive support arm to prevent unintended release during operations. How is the clamp mounted in a fixture? The clamp is designed for vertical-foot mounting, enabling direct attachment to fixture plates or dedicated mounting blocks at a 90° locking angle. What are the dimensions relevant for tool layout? Key dimensions are a 129 mm support arm and a compact body weight of 1.42 kg, suitable for dense arrangements in jigs and fixtures. Can this clamp be used in automated setups? The robust lever and locking mechanism make the clamp suitable for manual and automated fixtures where consistent repeatability is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 129mm Horizontal Clamp With Solid Holding Arm, 5 000 N Hold Force, Galvanised - Kukamet
Take advantage of a galvanised, heavy-duty design combined with a high 5,000 N holding capacity and a compact 129 mm arm for secure fixture clamping and reliable production runs. Order the clamp via Metav Werkzeuge or request advice from our specialists for seamless integration. Horizontal clamp 111 — Kukamet horizontal toggle clamp, galvanised, 5,000 N holding force The Horizontal clamp 111 is a robust horizontal toggle clamp designed for fixture and jig use in metalworking and general workshop assembly, providing secure retention at a 90° lever angle. Galvanised steel construction 5,000 N maximum holding force 129 mm solid holding arm Horizontal base for secure mounting Secure clamping that keeps production moving The clamp delivers a clear technical advantage: a 5,000 N maximum holding capacity with a 4,500 N maximum clamping pressure, ensuring components remain immobile during machining, welding or assembly. This difference between holding and clamping values reflects the device’s dual role — the higher holding force secures parts against movement, while the clamping pressure is the direct force applied to the workpiece. The reliable mechanical action of the toggle mechanism reduces rework and improves throughput by maintaining consistent positioning under cyclical loads. Durable construction for workshop conditions Made from galvanised steel with a solid holding arm, the device resists corrosion and mechanical wear typical in production environments. The compact mass and build quality (weight approx. 1.378 kg) deliver a stable feel without excessive bulk, enabling close-packed fixture layouts. The robust arm and pivot points are engineered for frequent operation, so maintenance intervals are extended and component replacement is minimised — a tangible benefit for routine production processes. Simple integration and precise positioning A horizontal base and a defined 90° lever geometry allow straightforward mounting into benches, jigs and welding fixtures. The 129 mm arm provides effective leverage for fast clamping action while keeping the overall footprint small, making the clamp suitable for both CNC tooling jigs and manual assembly stations. The flat base simplifies alignment and repeatable positioning, which shortens set-up times and stabilises cycle performance across batches. Practical applications and efficiency gains This clamp is intended for use wherever secure, repeatable retention is required: fixture plates, welding jigs, assembly benches and test rigs. Its galvanised finish and solid arm make it appropriate for demanding shop-floor situations where reliability and uptime matter. By integrating this clamp into a fixture, operators benefit from reduced handling time and fewer positional errors, contributing to measurable process efficiency and a more predictable production flow. Opt for the Kukamet horizontal clamp 111 for dependable fixture retention — contact Metav Werkzeuge in Emmerich for technical clarification or to secure supply direct from stock. Technical data Article number: 111-5-D-C1 GTIN: 8680731500318 eClass: 21041719 ETIM: EC011973 Manufacturer: Kukamet Facts Arm length: 129 mm Weight: 1.378 kg Holding force (max): 5,000 N Clamping force (max): 4,500 N Angle: 90° Special features Material: galvanised Mounting: horizontal base Solid holding arm Category: clamp FAQ What is the difference between holding force and clamping force for this clamp? The holding force refers to the maximum retention capability (5,000 N) of the clamp once engaged; the clamping force (4,500 N) denotes the direct pressure applied to the workpiece by the mechanism during closure. Can the clamp be mounted on a fixture plate or bench? Yes. The horizontal base is intended for secure mounting to fixture plates, benches and jig assemblies, allowing repeatable positioning and easy alignment. Is the clamp suitable for welding fixtures and humid environments? The galvanised steel construction improves corrosion resistance, making the clamp suitable for welding jigs and general workshop environments where occasional exposure to moisture occurs. How compact is the arm and what leverage does it provide? The arm length is 129 mm, offering a balance of compact footprint and effective leverage for fast, secure clamping action in confined fixture arrangements. Which SKU should be referenced when ordering spare parts or additional units? Reference SKU 111-5-D-C1 and GTIN 8680731500318 when ordering additional clamps or enquiring about compatibility. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 130mm Pneumatic Clamp With Vertical Foot, Massive Holding Arm, 4.5kN Push / 5kN Hold, Galvanised - Kukamet
A compact, heavy‑duty solution: galvanised construction plus a 130 mm massive hold arm and up to 5,000 N holding force deliver secure right‑angle clamping and long service life; order the Pneumatic clamp 651 directly via Metav Werkzeuge or consult their specialists for application advice. Pneumatic clamp 651 — 90° vertical‑foot pneumatic clamp by Kukamet A Pneumatic clamp 651 designed for reliable right‑angle holding in jigs, fixtures and repetitive assembly processes. Galvanised steel construction 130 mm heavy-duty hold arm 90° lock with 5,000 N holding force Vertical-foot mounting for stable fixing High‑force pneumatic actuation for consistent production results The pneumatic actuation provides a measurable and repeatable clamping action, driven by a maximum actuation force of 4,500 N and a holding capacity of 5,000 N. This combination reduces variation between cycles and supports process reliability in medium‑ to high‑volume operations. The clearly defined forces help planners calculate fixture loads and safety factors, while the pneumatic drive enables fast clamping and unclamping without manual effort. Built for durability on the shop floor Constructed from galvanised steel and fitted with a massive holding arm, the unit resists wear and corrosion in demanding environments. The 130 mm arm offers extended reach for deeper workpieces, maintaining stiffness and preventing deflection under load. These material and design choices translate into longer maintenance intervals and stable clamping performance over time, which is beneficial where uptime and consistency matter most. Space‑efficient mounting and right‑angle positioning The vertical‑foot mounting places the clamp base beneath the fixture plate, saving horizontal space and simplifying layout in tight assemblies. The integrated 90° locking position secures workpieces at a precise right angle, making the device suitable for welding jigs, inspection fixtures and repeatable assembly stations where orthogonal alignment is required. The mounting arrangement supports straightforward integration into existing tooling. Practical installation and predictable upkeep The mechanical design emphasises straightforward installation and predictable service needs. The robust components minimise wear items, while the pneumatic operation reduces operator intervention. For system planners, the clear numeric data for actuation and holding forces enables exact load calculations and helps select suitable pneumatic valves and safety devices. Replacement parts and routine checks focus on seals and pivot points to preserve consistent clamp function. Contact Metav Werkzeuge for Kukamet 651 enquiries, availability and specification support — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss fixture integration and delivery from Emmerich Technical Data SKU: 651-5-D-C1 Brand: Kukamet eClass: 21021004 ETIM: EC011973 Facts Arm length: 130 mm Holding force max: 5,000 N Actuation force max: 4,500 N Angle: 90° Features Material: galvanised steel Mounting: vertical foot Massive holding arm Design type: pneumatic clamp FAQ Is the clamp suitable for automated production lines? The Kukamet Pneumatic clamp 651 is designed for repetitive work and its pneumatic actuation with 4,500 N actuation force supports integration into automated or semi‑automated lines. What holding force can be expected from this clamp? Rated holding force for the Pneumatic clamp 651 is 5,000 N, providing secure fixation for many assembly and fixture applications. How is the clamp mounted to a fixture? Mounting is via a vertical foot, enabling the clamp to be fixed beneath or alongside a plate for space‑efficient integration. What advantage does the 130 mm arm offer? The 130 mm heavy‑duty arm increases reach for deeper workpieces while maintaining rigidity and repeatable clamping geometry. Is the clamp corrosion‑resistant for workshop environments? The unit is galvanised, offering enhanced resistance to corrosion and making it suitable for typical shop floor conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 1400 N Vertical Clamp Zinc Plated, 1625 N Holding Force - Kukamet
Take advantage of reliable, compact clamping with a galvanised finish, 1,400 N clamping force and a horizontal base that fits into light to medium-duty fixtures; order the Vertical Clamp 251 directly via Metav Werkzeuge or ask our consultants if needed. Vertical Clamp 251 (251-3) — Kukamet vertical lever clamp, 90° angle, galvanised A Vertical Clamp 251 designed for secure workholding in jigs and fixtures where a compact, lightweight lever clamp is required for repeatable vertical clamping. Galvanised finish for corrosion resistance 1,400 N clamping force for secure holding 90° clamping angle for vertical operation Compact 0.27 kg with horizontal base mount Reliable clamping performance for production use The clamp delivers a clear technical benefit: a 1,400 N maximum clamping force combined with a 1,625 N holding force ensures stable retention of workpieces during machining, assembly or inspection. The specification translates directly into fewer relocations and faster cycle times on production benches. By converting the raw figures into operational terms, the unit provides predictable clamping capacity for light to medium-duty tasks and makes process planning more straightforward for workshop managers. Durable finish and compact construction reduce maintenance A galvanised coating protects the metal surfaces from corrosion, extending service life in everyday workshop environments. Its 0.27 kg weight and compact geometry reduce added mass on fixtures, which is particularly useful for jigs that must be repositioned frequently. The lever mechanism is simple to maintain; with fewer moving parts the risk of downtime is minimised, supporting a cost-effective, long-term workflow without complex servicing requirements. Practical integration into fixtures and jigs Designed with a horizontal base and a 90° clamping angle, the Vertical Clamp 251 fits common jig plate layouts and offers straightforward mounting on flat surfaces. The lever-style actuation provides rapid engagement and disengagement for repetitive tasks, improving throughput where frequent clamp operations are required. The clamp’s design suits applications such as small-part assembly, light machining and inspection fixtures, where reliable vertical clamping and compact footprint matter most. For consistent workshop clamping with Kukamet quality, contact Metav Werkzeuge for tailored advice or to arrange supply—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 251-3 GTIN: 8680731504521 Brand: Kukamet Material: galvanised Weight: 0.27 kg Mounting: horizontal base Angle: 90° Max clamping force: 1,400 N Max holding force: 1,625 N eClass: 21041717 ETIM: EC011973 Core specifications Clamping force (max): 1400 N Holding force (max): 1625 N Weight: 0.27 kg Angle: 90° SKU: 251-3 Features Lever clamp design Galvanised coating Horizontal foot for base mounting No special features FAQ What maximum clamping force does the clamp provide? The clamp provides a maximum clamping force of 1,400 N; the specified holding force is 1,625 N for secure retention. Which materials is this clamp suited for in fixtures? The clamp’s design is suitable for a wide range of workshop applications including light machining and assembly of metals and engineering plastics where vertical clamping is required. How is the clamp mounted? Mounting is via a horizontal base (horizontal foot), making it compatible with flat jig plates and baseboards. What surface protection does the clamp have? The component is galvanised, offering corrosion resistance suitable for standard workshop environments. What is the product SKU and brand for ordering reference? Ordering reference: Kukamet Vertical Clamp 251, SKU 251-3, GTIN 8680731504521. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com