Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
90° 140mm Horizontal Clamp With Heavy Duty Arm, 850N Thrust, Zinc-Plated - Kukamet
Take advantage of a robust, galvanised construction combined with a massive 140 mm holding arm and up to 850 N clamping force for secure, repeatable workholding. Order the clamp directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Horizontal toggle clamp 113 by Kukamet — galvanised, 140 mm arm, 850 N clamping force A Horizontal toggle clamp 113 engineered for reliable fixture work and quick, positive locking where compact, right-angle mounting is required. Galvanised steel construction Massive 140 mm holding arm 850 N clamping force 90° angle-foot mounting Secure, repeatable clamping that improves process reliability The clamp delivers a consistent 850 N clamping force and a separate 1,000 N holding capacity, providing a clear technical basis for dependable fixturing in serial and single-piece production. The combination of a massive holding arm and a galvanised body reduces vibration and movement during machining and assembly operations, which in turn improves dimensional repeatability. Designed for lever-action use, the mechanism locks positively in the horizontal plane, minimising the need for readjustment and supporting efficient cycle times. Compact mounting for flexible fixture design With a 140 mm arm and a 90° angle-foot mounting, the clamp integrates into tight jigs and modular fixture plates while keeping the working envelope small. The low mass of 0.164 kg supports lightweight fixture systems without compromising on strength, and the angled foot provides straightforward, space-saving attachment to plates or frames. The toggle action allows rapid engagement and release, reducing handling time and supporting smoother workflow on the shop floor. Galvanised finish and robust mechanics for low maintenance Constructed from galvanised material and featuring a substantial holding arm, the clamp is intended for prolonged use with minimal upkeep. The corrosion-resistant surface treatment extends service life in typical workshop environments and simplifies routine cleaning. Reliable mechanical locking reduces unintended release, supporting operator confidence and workplace safety. The unit is identified by SKU 113-1-D-C3 and manufactured by Kukamet, offering a compact, pragmatic solution for demanding workholding tasks. Contact Metav Werkzeuge today to discuss the Kukamet horizontal toggle clamp 113 and how its robust galvanised construction and high clamping force can be applied to improve fixture stability in production or maintenance setups. Technical data Article number: 113-1-D-C3 GTIN: 8680731505733 Facts Arm length: 140 mm Clamping force: 850 N Holding force: 1,000 N Angle: 90° Weight: 0.164 kg Special features Mounting: angle foot Material: galvanised steel Massive holding arm Model: 113 Brand: Kukamet FAQ What clamping force can be expected from this toggle clamp? The Kukamet horizontal toggle clamp 113 provides a clamping force of 850 N and a holding capacity of 1,000 N, suitable for secure fixturing under typical workshop loads. How is the clamp mounted to a fixture plate? Mounting is carried out via the 90° angle foot, allowing direct attachment to plates or frames; the compact design supports integration into tight fixture layouts. What is the arm length of the clamp and why does it matter? The arm length is 140 mm, which balances reach and leverage to deliver consistent force while keeping the fixture footprint compact. Is the clamp suitable for use in humid or corrosive workshop conditions? The clamp has a galvanised finish that improves resistance to corrosion in standard workshop environments; regular inspection and cleaning are still recommended. Which SKU should be ordered for this model? Order the unit with SKU 113-1-D-C3; the clamp is identified as model 113 from Kukamet. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 140mm Horizontal Clamp With Massive Arm, Safety Lock, 1,000N Holding Force - Kukamet
Take advantage of the solid 140 mm holding arm, integrated safety lock and up to 1,000 N holding force for dependable, repeatable workholding; order via Metav Werkzeuge or consult our specialists for application advice. Horizontal clamp 113 — Kukamet horizontal lever clamp with 140 mm arm and 1,000 N holding force Horizontal clamp 113 is a compact lever-style clamp for secure, repeatable fixture work, designed for mounting on an angle base in jigs and small assembly stations 140 mm solid holding arm 90° angle base for fixed positioning Up to 1,000 N holding force Safety lock for secure clamping Reliable clamping where repeatability matters The lever-style clamp delivers a clear mechanical advantage: a holding force of 1,000 N and a maximum pressing force of 850 N translate into stable fixation of workpieces during assembly or light machining operations. The 140 mm arm provides reach while keeping the overall footprint small, allowing integration into tight fixtures. Built with a solid holding arm and a positive safety lock, the mechanism prevents accidental release and supports consistent cycle times on production lines and test rigs. Compact design with industrial finishes for durability Finished in a black oxide (brüniert) surface treatment, the clamp resists corrosion in workshop environments while maintaining a low visual profile in fixtures. Weighing approximately 0.155 kg, the device balances strength with minimal added mass to moving assemblies. The 90° angle base simplifies positional alignment on plates and blocks; the robust mounting makes it suitable for repeated clamping cycles and saves assembly time compared with loose or makeshift holding methods. Simple integration and clear technical advantages Mounting is straightforward: a fixed angle foot secures the clamp to a base plate and ensures a precise lever trajectory. The mechanical design avoids complex adjustment, so set-up time is reduced and throughput improves. For applications where safe, repeatable holding is required—such as small-batch production, inspection fixtures or fixture prototypes—this lever clamp provides a pragmatic combination of compact dimensions, measurable clamping force and a safety mechanism that supports operator confidence. Contact Metav Werkzeuge for tailored advice or to secure a Kukamet Horizontal clamp 113 for reliable workholding — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: B113-1-D-L-C3 eClass: 21041719 ETIM: EC011973 Arm length: 140 mm Holding force: 1,000 N Maximum pressing force: 850 N Angle: 90° Weight: 0.155 kg Material: black oxide finish Mounting: angle foot Special features: solid holding arm and safety lock Story trigger: lever clamp FAQ What clamping force can be expected from this horizontal clamp? The Kukamet Horizontal clamp 113 provides up to 1,000 N holding force with a maximum pressing force of 850 N, giving a reliable mechanical hold for assembly and light machining tasks. How is the clamp mounted in a fixture? The clamp is fitted via a 90° angle foot, allowing secure bolting to base plates or fixture blocks; the fixed mounting ensures repeatable lever movement and alignment. Is the lever mechanism safe for repeated manual use? Yes, the unit incorporates a safety lock and a solid holding arm to prevent accidental release and to support safe, repeatable operation during frequent clamping cycles. Which finish and material characteristics support durability? The device is supplied with a black oxide finish that reduces corrosion risk while maintaining surface integrity under typical workshop conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 140mm Horizontal Clamp With Massive Holding Arm And Safety Lock, Zinc-Plated - Kukamet
Take advantage of a compact, galvanised clamp that combines a 140 mm robust holding arm with a secure safety locking mechanism, delivering up to 1,000 N holding force for reliable positioning. Order the clamp directly via Metav Werkzeuge or contact the consultants for specification advice. Horizontal toggle clamp 113 — galvanised lever clamp with safety lock (Kukamet) Horizontal toggle clamp 113 is a compact lever clamp designed for fixture workholding in machining and assembly, providing repeatable clamping at a 90° angle. Heavy-duty galvanised construction 140 mm robust holding arm Safety locking mechanism Holding force 1,000 N, pressure 850 N Consistent clamping for production environments The galvanised construction delivers corrosion resistance and long service life in workshop settings while maintaining a compact footprint. The 140 mm holding arm and solid build translate directly into repeatable clamping performance, reducing setup variation in jigs and fixtures. With a rated holding force of 1,000 N and a maximum applied pressure of 850 N, the device is suited to light- and medium-duty workholding tasks where reliable part retention is essential for process stability. Safe handling and fast integration into tooling A reinforced holding arm with a dedicated safety lock minimises unintentional release during handling or vibration-prone operations. The clamp’s angled base facilitates mounting on fixture plates and modular frames, allowing quick mechanical integration without complex adaptors. This combination of secure locking and straightforward attachment supports efficient changeovers and reduces the risk of downtime due to unclamping. Material choice and workshop suitability Constructed from galvanised steel, the clamp resists surface corrosion common in humid or coolant-exposed environments, helping to preserve function and surface finish over time. The lightweight design (0.155 kg) keeps added mass on tooling low, which is advantageous for mobile fixtures and handheld jigs. The robust mechanical design favours longevity and predictable wear behaviour, simplifying maintenance schedules and inventory planning. Designed for clear specification and reliable performance Technical specification such as arm length, holding and pressure forces are stated clearly to support selection and documentation in procurement and engineering planning. The solid lever principle ensures mechanical advantage without electrical components, reducing potential failure modes and facilitating straightforward inspection routines. This mechanical simplicity supports both operational reliability and ease of replacement within existing clamping systems. Contact Metav Werkzeuge for application guidance or to request the Kukamet Horizontal toggle clamp 113 (SKU 113-1-D-L-C3) directly from stock in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: 113-1-D-L-C3 GTIN: 8680731505764 Designation: Horizontal toggle clamp 113 Manufacturer: Kukamet Facts Arm length: 140 mm Holding force max: 1,000 N Pressure force max: 850 N Angle: 90° Weight: 0.155 kg Eclass: 21041719 ETIM: EC011973 Special features Material: galvanised Mounting: angled base (Winkelfuß) Massive holding arm Safety locking mechanism Category: Spanner FAQ What clamping forces does the horizontal toggle clamp provide? The Horizontal toggle clamp 113 offers a holding force of 1,000 N and a maximum applied pressure of 850 N, suitable for light to medium workholding tasks. How is the clamp mounted to a fixture or jig? Mounting is via an angled base (Winkelfuß) that allows attachment to fixture plates and modular frames; the design supports quick mechanical integration. Which material is the clamp made from and how does that affect use? The clamp is galvanised, providing corrosion resistance for workshop environments and coolant exposure while ensuring a long service life. Does the clamp include a safety feature to prevent accidental release? Yes, the device includes a safety locking mechanism and a massive holding arm to secure the lever in the clamped position and reduce accidental opening. What are the dimensions and weight relevant to fixture design? Key dimensions are a 140 mm holding arm and a 90° operating angle; weight is 0.155 kg, which minimises added mass to tooling assemblies. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 140mm Horizontal Clamp With Solid Holding Arm, 850 N Actuation Force, 1000 N Holding Force - Kukamet
Combining a robust massive holding arm, precise holding force of 1,000 N and compact 140 mm reach results in dependable clamping with minimal setup effort; order the Kukamet 113 horizontal clamp directly via Metav Werkzeuge or consult our advisors for system integration. Kukamet 113 horizontal clamp — 140 mm arm, 850 N clamping force The 113 horizontal clamp is a lever-operated horizontal clamp designed for jigs and fixtures where secure, repeatable 90° positioning and compact mounting are required. Solid 140 mm holding arm 850 N maximum clamping force 1,000 N rated holding force Angled foot mount for 90° positioning Secure, repeatable clamping for production use The robust design delivers consistent clamping and repeatable positioning, making it suitable for assembly jigs and repetitive fixture tasks. With a holding force of 1,000 N and a maximum clamping force of 850 N, the device maintains workpiece stability during machining, welding or inspection operations. The massive holding arm increases leverage and reduces deformation under load, which translates into fewer reworks and improved process reliability. Technical terms such as clamping force (actual applied force during engagement) and holding force (resistance against unintended release) are purposely separated to help in process planning and safety assessment. Compact mounting and straightforward integration into fixtures The angled foot mounting allows a compact footprint where floor or plate space is limited, while the 90° orientation assists in aligning clamps in confined setups. The 140 mm arm provides reach without excess bulk, and the light overall mass of 0.164 kg keeps added inertia to a minimum on moving assemblies. Where quick retrofitting of a clamping point is required, the angled base simplifies alignment and reduces the need for additional brackets. The blackened/brünished finish offers a uniform appearance that integrates easily into existing tooling layouts. Workshop durability and low-maintenance operation Finished in a blackened brünished coating, the clamp resists wear and surface corrosion typical in workshop environments, preserving contact geometry over time. The lever mechanism is engineered for frequent actuation, supporting high-cycle production without complex servicing. Built from hardened steel components and a massive arm, the product is intended for long-term use in demanding industrial conditions, reducing total cost of ownership through fewer replacements. For customers seeking predictable performance in jigs and fixtures, this clamp provides a balance of strength, compactness and durability. Choose Kukamet’s 113 horizontal clamp for secure, compact fixturing—contact Metav Werkzeuge for procurement and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B113-1-D-C3 GTIN: 8682843522219 Manufacturer: Kukamet ECLASS: 21041719 ETIM: EC011973 Core specifications Arm length: 140 mm Clamping force max: 850 N Holding force max: 1,000 N Angle: 90° Weight: 0.164 kg Design & features Mounting type: angled foot Massive holding arm Finish: blackened/brünished Category: Clamp (Spanner) SKU: B113-1-D-C3 FAQ What clamping and holding forces are specified for this clamp? The clamp offers a maximum clamping force of 850 N and a holding force of 1,000 N for secure fixation in fixtures; values are intended for static and typical workshop use. Is the clamp suitable for 90° fixtures and tight layouts? Yes, the angled foot and 90° orientation make the clamp suitable for compact jigs and tight fixture configurations where space optimisation is required. What materials and finish are used on the clamp? The fixture is supplied with a blackened/brünished finish and robust steel construction to resist workshop wear and surface corrosion. How long is the reach of the clamp arm? The clamp features a 140 mm arm, providing a balance between reach and compactness for typical jigs and fixtures. Can the clamp be used for high-cycle industrial applications? The lever and massive arm design are intended for frequent actuation and offer long service life under regular industrial cycling when maintained according to standard workshop practices. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 141 Horizontal Clamp With Safety Lock, Zinc Plated, 1.75 kN Thrust / 2.6 kN Hold - Kukamet
Combine a solid arm with a 90° horizontal mounting and an integrated safety lock to secure workpieces reliably in fixtures and jigs. Benefit from a compact, zinc‑plated design and a holding force of 2,600 N for stable clamping under light to medium loads. Order the Horizontal clamp 141 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 141 (Kukamet) — 90° horizontal toggle clamp, zinc‑plated A Horizontal clamp 141 designed for secure 90° horizontal clamping in fixtures and jigs 90° horizontal mounting base Zinc‑plated corrosion resistance Solid arm for robust clamping Safety locking mechanism included Consistent clamping performance for production tasks The clamp delivers defined mechanical restraint with a clamping force of up to 1,750 N and a holding force of 2,600 N, values that ensure steady fixation during positioning and light machining. Measured in newtons, these figures describe the force transmitted through the toggle action and indicate the clamp’s ability to resist workpiece movement under load. This results in fewer interruptions, reduced rework and a more predictable production flow when the clamp is integrated into modular jigs or assembly fixtures. Built to endure workshop conditions Constructed from zinc‑plated components and fitted with a solid arm, the clamp offers enhanced resistance to corrosion and mechanical wear while remaining compact at approximately 0.5 kg. The finish extends service life in busy workshop environments and simplifies maintenance cycles. The robust construction supports repeated actuation and contributes to consistent clamping geometry over time, which lowers long‑term operating costs through reduced replacement and less downtime. Integrates safely into jigs and fixtures Designed with a horizontal base and a fixed 90° mounting orientation, the device is straightforward to position on flat fixtures or benches. The built‑in safety locking mechanism prevents accidental opening once the toggle is engaged, improving operator safety and process reliability. As a toggle clamp, it provides quick actuation and secure locking without complex handling, allowing fast part loading and unloading while maintaining repeatable clamping behaviour. Choose the Kukamet Horizontal clamp 141 for dependable, space‑saving clamping — contact Metav Werkzeuge in Emmerich for technical advice and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 141-4-L GTIN: 8682843520178 Manufacturer: Kukamet Model designation: 141 Category path: Spanner Facts Weight: 0.5 kg Clamping force (max): 1,750 N Holding force (max): 2,600 N Angle: 90° eClass: 21041719 ETIM: EC011973 Special features Material finish: zinc‑plated Mounting: horizontal base / horizontal foot Safety locking mechanism: yes Solid arm: yes Clamp type: toggle clamp FAQ What clamping and holding forces does the clamp provide? The Kukamet Horizontal clamp 141 provides a clamping force up to 1,750 N and a holding force up to 2,600 N, giving defined restraint for fixture applications. How is the clamp mounted on a fixture? Mounting is via a horizontal base with a fixed 90° angle, intended for attachment to flat jigs or benches. Does the clamp include a safety feature to prevent accidental release? Yes, the device is fitted with a safety locking mechanism that secures the toggle in position once engaged. What material and finish does the clamp have? The clamp is zinc‑plated, combining corrosion resistance with a solid arm for mechanical robustness. Which applications suit this type of toggle clamp? Ideal for jigs, fixtures and assembly stations where quick clamping, repeatability and a secure lock at 90° are required; the compact, robust design supports frequent actuation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 141mm Horizontal Clamp Heavy-Duty Arm, 3.65 kN Hold Force, Blackened Finish - Kukamet
Take advantage of a compact yet powerful clamping solution that combines a massive holding arm, a 141 mm reach and up to 3,650 N holding force for secure fixture setup. Order the horizontal clamp directly via Metav Werkzeuge or consult our technical advisers for specification matching and delivery from Emmerich. Horizontalspanner 113 — horizontal clamp with 90° angle foot and 141 mm arm (Kukamet) Horizontalspanner 113 is a horizontal clamp designed for robust fixturing at 90° with an angle foot mounting and a heavy-duty holding arm for repeatable clamping performance in workshop and light industrial environments Massive holding arm for high rigidity 141 mm reach for versatile workpiece clearance Up to 3,650 N holding force for secure clamping Angle foot mounting for stable 90° installation Reliable clamping where stiffness matters The horizontal clamp delivers a concentrated, repeatable clamping action thanks to its massive holding arm and compact geometry. The heavy arm reduces flex under load, which directly improves machining stability and repeatability when holding workpieces at right angles. With a blackened finish the component resists corrosion in workshop atmospheres while presenting a professional appearance. For applications where fixture rigidity and predictable behaviour determine part quality, this clamp provides a straightforward mechanical solution that reduces rework and keeps cycle times low. Engineered forces for consistent production Designed for measurable performance, the device offers a maximum holding force of 3,650 N and a pressing capacity of 3,500 N, values that translate into secure fixation for a wide range of materials such as mild steel, aluminium and cast components. The specification of force is given in newtons to ensure objective comparison with other clamping elements and to support process calculations for fixture design. The 141 mm arm provides clearance for tooling while keeping the centre of force close to the clamped surface, which helps to avoid unwanted moments and improve tool life. Practical mounting and durable finish for workshop use The 90° angle foot mounting enables direct installation on t-slotted tables, fixture plates or custom brackets, keeping the clamp firmly located without complex adapters. The blackened/brünierung finish offers surface protection and reduces glare during set-up. This compact unit, weighing approximately 0.915 kg, is easy to incorporate into existing assemblies and is particularly suitable for jigs and fixtures where space is limited but high holding force is required. The solid construction limits maintenance needs and keeps performance predictable across production shifts. Choose the Kukamet 113 horizontal clamp for robust right‑angle fixturing and contact Metav Werkzeuge for order placement or technical matching — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: B113-4-D-C2 GTIN: 8680731507515 Manufacturer: Kukamet Facts Arm length: 141 mm Angle: 90° Weight: 0.915 kg Max holding force: 3,650 N Max pressing force: 3,500 N eClass: 21041719 ETIM: EC011973 Special features Mounting: angle foot Finish: blackened (Schwarz brüniert) Massive holding arm (massiver Haltearm) Category: Spanner FAQ What materials can be clamped securely with this horizontal clamp? The horizontal clamp is suitable for common workshop materials including steel and aluminium; its rated holding force and robust arm design make it effective for machining and assembly tasks. How is the clamp mounted to a fixture or table? The clamp uses an angle foot mounting to enable firm 90° installation on t-slot tables, fixture plates or custom brackets for stable positioning. What does the specified holding force mean in practice? The holding force of 3,650 N indicates the maximum tensile force the clamp can reliably maintain; it helps assess suitability for the specific workpiece and machining forces. Is the finish corrosion resistant? The blackened finish provides surface protection appropriate for workshop environments and reduces surface glare during set-up. Which SKU identifies this model? This model is supplied as SKU B113-4-D-C2 and is listed under the Kukamet 113 horizontal clamp series. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 141mm Horizontal Clamp With Heavy-Duty Arm And Safety Lock, Galvanised - Kukamet
Combine galvanised durability, a 3650 N holding force and a secure safety locking mechanism for dependable fixture clamping; order the unit directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal clamp 113 – Kukamet, galvanised toggle clamp with angled foot and 3650 N holding force Horizontal clamp 113 is a compact industrial toggle clamp built for secure workholding in fixtures and jigs across workshop and light production environments Robust galvanised steel construction Safety latch for secure clamping 3650 N holding force 141 mm arm length for extended reach Precision clamping that reduces rework and stoppages The horizontal clamp 113 offers a clearly measurable clamping solution: with a holding force of 3650 N and a clamping force of 3500 N, the mechanism provides consistently repeatable pressure. The galvanised finish resists corrosion in workshop atmospheres, while the massive holding arm minimises deformation under dynamic loads. Translating these figures into shop-floor advantage, the clamp reduces component movement during machining or assembly, which lowers scrap rates and shortens inspection loops. Simple integration into fixtures and jigs for faster set-ups Engineered with an angled foot and a fixed 90° orientation, the clamp is intended for straightforward bolting to benches, fixtures or dedicated jigs. The 141 mm arm length extends reach without sacrificing stability, and the unit’s compact mass of 0.94 kg keeps additional fixture weight low. These attributes allow quick retrofitting into existing tooling or new production cells, cutting fixture build time and supporting lean changeovers. Built for safe, everyday workshop use Safety and longevity are central: a positive safety latch secures the clamp in the closed position and prevents accidental release, while the robust mechanics are designed for repetitive operation. The galvanised construction simplifies maintenance by offering corrosion protection and easy cleaning. For production environments seeking reliable mechanical clamping with minimal servicing, this toggle clamp delivers steadiness and predictable performance that supports continuous operation and operator confidence. Secure workshop reliability with the Kukamet horizontal clamp 113 — contact Metav Werkzeuge for tailored advice and direct supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 113-4-D-L-C2 GTIN: 8680731500967 Category: Toggle clamp Facts Holding force: 3650 N Clamping force: 3500 N Arm length: 141 mm Angle: 90° Weight: 0.94 kg Special features Material: galvanised steel Mounting: angled foot Safety locking mechanism Massive holding arm FAQ What clamping performance can be expected from this clamp? The Kukamet horizontal clamp 113 provides a holding force of 3650 N and a clamping force of 3500 N, ensuring secure fixation in common workshop fixtures. How is the clamp mounted in a fixture? Mounting is via an angled foot designed for bolting to benches, jigs or fixture plates; the 90° orientation simplifies integration into standard setups. Is the clamp suitable for continuous use in production? Yes, the galvanised construction and robust mechanics of the horizontal clamp 113 are intended for repetitive operation with low maintenance requirements. Does the clamp include a safety feature to prevent accidental release? A dedicated safety locking mechanism secures the clamp in the closed position, reducing the risk of unintended opening during handling or machining. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 141mm Horizontal Clamp With Solid Holding Arm, 3.65kN Holding Force - Kukamet
Take advantage of a combination of robust clamping force, a massive holding arm and a corrosion-resistant finish for reliable fixture performance and reduced maintenance. Order the Horizontal toggle clamp directly via Metav Werkzeuge or ask our consultants if needed. Horizontal toggle clamp »113« by Kukamet — 3,650 N holding force, galvanised finish The Horizontal toggle clamp »113« is a lever-operated horizontal clamp designed to secure workpieces at 90° in jigs, fixtures and assembly stations for consistent positioning and repeatable processing. Massive holding arm for high rigidity Holding force 3,650 N for secure clamping Galvanised finish for corrosion resistance Angled base (90°) with right-angle foot Consistent positioning for repeatable production Built for repetitive clamping cycles, the lever clamp delivers a holding force of 3,650 N, ensuring secure fixation and stable machining conditions. The massive holding arm reduces deflection under load, which translates directly into repeatable positioning and fewer rework cycles. For production environments where fixture reliability matters, the robust construction supports predictable process outcomes and improved throughput. Durable finish that minimises downtime A galvanised surface treatment provides a protective barrier against corrosion in workshop environments, reducing the need for frequent maintenance or replacement. The corrosion-resistant finish preserves the clamp’s functional surfaces and pivot points, maintaining clamping accuracy over time. This durability lowers lifecycle interruptions and helps sustain consistent production quality with minimal intervention. Compact integration with right-angle mounting The clamp’s right-angle foot and 90° orientation allow direct mounting to fixture plates and welding jigs, saving space while offering a secure attachment. The pivot arm measures 141 mm, providing a stable lever length for effective force transfer without excessive footprint. At approximately 0.915 kg, the unit is easy to position and retro-fit into existing tooling layouts, streamlining assembly and reducing integration time. For robust fixture solutions and further integration advice, contact Metav Werkzeuge in Emmerich — request a quotation for the Kukamet Horizontal toggle clamp 113 or consult our specialists via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 113-4-D-C2 GTIN: 8680731500936 Brand: Kukamet Model: 113 Facts Arm length: 141 mm Holding force: 3,650 N Maximum pressing force: 3,500 N Angle: 90° Weight: 0.915 kg eClass: 21041719 ETIM: EC011973 Special features Material: galvanised Mounting: right-angle foot Massive holding arm Lever-operated horizontal clamp Category: Spanner FAQ How much clamping force does the clamp provide? The Kukamet Horizontal toggle clamp 113 offers a holding force of 3,650 N and a maximum pressing force of 3,500 N for secure fixation in fixtures and jigs. Can the clamp be mounted on a right-angle fixture plate? Yes. The clamp features a right-angle foot for direct mounting at 90°, enabling compact integration into fixture plates and welding jigs. What finish protects the clamp in workshop environments? The clamp is supplied with a galvanised finish, which provides corrosion resistance and helps reduce maintenance requirements over time. What are the key dimensions and the SKU for ordering? Key dimensions: arm length 141 mm; weight 0.915 kg. SKU for ordering: 113-4-D-C2 (model 113). Is this clamp suitable for repetitive production use? Yes. The robust construction, massive holding arm and rated holding force make the clamp suitable for repetitive clamping cycles in production and assembly applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 143mm Horizontal Clamp With Massive Holding Arm, 850N/1000N Holding Force - Kukamet
The combination of a massive holding arm, a compact vertical foot and an 850 N clamping force delivers dependable, repeatable workholding for production and jig applications; order the Horizontal Toggle Clamp B112 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal Toggle Clamp B112 — horizontal toggle clamp with 850 N clamping force and 143 mm arm (Kukamet) A Horizontal Toggle Clamp B112 engineered for secure fixture work, offering a robust holding arm and vertical mounting foot for compact jig layouts. Heavy-duty holding arm, 143 mm reach 850 N clamping force, 1000 N holding force Vertical mounting foot for compact fixtures Black-oxide finish for corrosion resistance Consistent clamping performance for reliable production The toggle device provides a repeatable clamping force that supports stable machining and assembly processes. With a rated 850 N clamping force and a maximum 1000 N holding capacity, the unit secures workpieces against movement during light to medium operations; this translates into fewer stoppages and more consistent cycle output. The 143 mm arm reach increases accessibility in fixtures while the lever mechanism converts manual input into a high locking force, making the assembly suitable for repetitive tasks on the shop floor. The explanation of clamping versus holding values clarifies that one figure refers to active closing force and the other to sustained retention under load. Space-saving mounting and robust finish for long service life Designed with a vertical foot for mounting, the clamp fits tight layouts where horizontal footprint must be minimised. The massive holding arm and robust construction resist bending and wear under frequent use, reducing the need for early replacement. A black-oxide finish offers basic corrosion protection and a matte appearance that integrates well into industrial fixtures. The compact weight of 0.155 kg keeps moving fixture mass low, supporting rapid manual handling and easier indexing in modular jigs. Overall, the mechanical simplicity of this clamping solution reduces maintenance and keeps downtime to a minimum. Quick integration into jigs with clear handling characteristics The 90° lock angle provides an unmistakable end position for visual and tactile confirmation of engagement, improving operator confidence during repetitive clamping cycles. As a horizontal clamp with lever action, installation is straightforward on plates or tooling blocks where a vertical mounting option is preferred. The model’s compact dimensions and reliable locking behaviour make it a practical choice for both custom fixtures and small-batch production stations. The product’s design emphasises secure workholding and fast operation, supporting improved throughput and safer handling in everyday shop applications. Contact Metav Werkzeuge today to specify Kukamet’s B112 horizontal toggle clamp for concise fixture solutions or to arrange tailored technical advice from our consultants at Metav Werkzeuge. Technical Data SKU: B112-1-D-C3 GTIN: 8680731507157 Brand: Kukamet Core specifications Clamping force: 850 N Holding force: 1000 N Arm length: 143 mm Lock angle: 90° Weight: 0.155 kg Mounting: vertical foot Materials & special features Finish: black-oxide finish Massive holding arm Model: 112 Category: Toggle clamp / Spanner FAQ What clamping and holding forces does the clamp provide? The Kukamet Horizontal Toggle Clamp B112 offers a clamping force of 850 N and a maximum holding force of 1000 N for sustained retention under load. Can the clamp be mounted on a vertical or horizontal plate? Mounting is intended via the vertical foot; the clamp is suitable for attachment to plates or tooling blocks where a vertical mounting footprint is required. Is the arm length suitable for fixture work with medium-sized workpieces? The 143 mm arm provides extended reach for a variety of jigs and fixtures while maintaining compact overall dimensions for confined layouts. What surface treatment protects the clamp from corrosion? The device is supplied with a black-oxide finish that reduces corrosion risk and offers a subdued industrial appearance. How does the 90° lock angle benefit workshop use? The defined 90° lock position gives clear visual and tactile confirmation of engagement, aiding repeatability and operator safety. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 143mm Horizontal Clamp With Massive Support Arm And Safety Lock, Galvanised - Kukamet
Galvanised construction combined with a massive holding arm and a safety lock delivers reliable, repeatable clamping for jigs and fixtures. The compact 143 mm arm and 90° horizontal mounting allow straightforward integration into existing tooling. Order the Kukamet Horizontal clamp 111 via Metav Werkzeuge or contact our consultants for tailored application advice. Horizontal clamp 111 — Kukamet horizontal toggle clamp, galvanised, 90° A Horizontal clamp 111 engineered for secure, repeatable horizontal clamping in fixtures and jigs. Galvanised steel construction 1,000 N maximum holding force 850 N clamping force rating 90° horizontal orientation with 143 mm arm Consistent clamping that keeps production moving The horizontal toggle clamp delivers a measurable advantage in repeatability and process reliability. With a maximum holding force of 1,000 N and a rated clamping force of 850 N, the device separates the force that secures a workpiece from the force that applies pressure. This distinction reduces slippage under load and helps maintain part tolerances over long production runs. The result is fewer stoppages and a steadier output, which supports leaner workflows and predictable cycle times. Compact design for tight fixture layouts Space-conscious fixtures benefit from the clamp’s compact dimensions and light weight. The arm length of 143 mm and a slim profile make the unit suitable where clearance is limited, while the 90° orientation optimises use in horizontal jigs. At approximately 0.1 kg, the clamp contributes minimal mass to moving subassemblies and can be incorporated without adding undue inertia. These traits simplify integration into existing tooling and reduce time spent redesigning fixtures. Built to withstand workshop demands Constructed from galvanised steel, the clamp offers resistance to corrosion and prolonged service life in industrial environments. The massive holding arm increases mechanical stiffness, while the integrated safety lock prevents unintended release during handling or vibration. Together, these features lower maintenance frequency and improve operator confidence in repetitive tasks, supporting a safer, more durable clamping solution. Practical choice for jigs, fixtures and assembly benches This horizontal toggle clamp is well suited for general-purpose clamping in assembly, welding and inspection fixtures where a reliable, simple mechanical hold is required. The mounting on a horizontal base allows direct attachment to tooling plates and slotted fixtures. The Kukamet 111 offers a balance of robust mechanics and uncomplicated installation, making it an economical component for scalable fixture design. For secure, repeatable clamping in production, request the Kukamet Horizontal clamp 111 from Metav Werkzeuge—our consultants at info@metav-werkzeuge.com or +49 2822 7131930 can advise on integration and ordering. Technical data SKU: 111-1-D-L-C3 GTIN: 8680731505443 eCl@ss: 21041719 ETIM: EC011973 Manufacturer: Kukamet Core specifications Weight: 0.1 kg Arm length: 143 mm Clamping force (max): 850 N Holding force (max): 1,000 N Angle: 90° Materials and features Material: galvanised steel Mounting: horizontal base Massive holding arm Safety lock Datasheet: 111-112-113-l-katalogseite.pdf FAQ What forces are specified for this clamp? The Kukamet Horizontal clamp 111 is rated for a clamping force of 850 N and a holding force of 1,000 N, suitable for light to medium fixturing tasks. How is the clamp mounted in a fixture? Mounting is via a horizontal base; the clamp is designed for direct attachment to tooling plates and slotted fixture elements. Is the clamp suitable for use in corrosive environments? The clamp is made from galvanised steel, which provides enhanced corrosion resistance compared with untreated steel. Can this clamp be used for repetitive production cycles? Yes. The combination of a massive holding arm and a safety lock ensures repeatable performance and longevity in repetitive assembly or inspection applications. What is the product code for ordering? Ordering details: SKU 111-1-D-L-C3, GTIN 8680731505443. Use these codes when requesting the Kukamet horizontal toggle clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 143mm Horizontal Clamp With Solid Hold Arm And Safety Lock, 850N Press Force - Kukamet
Take advantage of a compact, lever-operated clamp that combines a massive holding arm, safety lock and up to 1,000 N holding force for reliable fixture work; order directly via Metav Werkzeuge or consult the technical team for configuration advice. 112 Horizontal clamp by Kukamet — heavy-duty arm, 1,000 N holding force The 112 horizontal clamp is a lever-style fixture designed for secure horizontal clamping in jig and fixture applications across workshops and production cells. Heavy-duty holding arm and safety lock 1,000 N maximum holding force 850 N maximum pressing force Vertical base with 90° clamping angle Consistent clamping performance for repetitive tasks A robust clamp delivers predictable results on repetitive assembly and machining operations. The combination of a massive holding arm and an integrated safety lock ensures the workpiece remains stable under load, while the specified 1,000 N maximum holding force and 850 N pressing force provide clear, measurable capacity for fixture design. This reliability shortens set-up time and reduces rework: fixtures close positively, parts are held without micro-movement, and downstream processes run with fewer interruptions. Space-efficient mounting that supports compact jigs Mounting and layout are simplified by the clamp’s vertical base, which keeps the footprint small and integrates cleanly into stacked or multi-level jig plates. The device locks at a 90° angle and uses a 143 mm arm to reach typical clamping positions without requiring excessive clearance. With a nominal mass of 0.1 kg, the unit contributes negligible inertia to moving sub-assemblies while the blackened finish offers basic surface protection suited to workshop environments. These traits make the clamp suitable where compact, repeatable clamping is prioritised over heavyweight fixtures. Practical design for workshop and small-series production The lever-operated mechanism combines simple handling with secure actuation, delivering repeatability in frequent cycle use. Constructed and finished for machine-shop conditions, the clamp supports quick retrofitting into existing jigs and is compatible with common fixture plates. As a standard component from Kukamet, the clamp is intended for engineers and technicians who require a dependable, low-maintenance solution that integrates well with standard tooling concepts. For further technical matching to specific materials and clamping scenarios, Metav Werkzeuge provides product selection support and delivery coordination. For reliable clamping in jigs and small-series production, request the Kukamet 112 horizontal clamp through Metav Werkzeuge — contact the Metav technical team at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for advice and rapid fulfilment. Technical data SKU: B112-1-D-L-C3 Type: Horizontal clamp 112 Brand: Kukamet Category: Spanner ECLASS: 21041719 ETIM: EC011973 Facts Arm length: 143 mm Clamping angle: 90° Maximum holding force: 1,000 N Maximum pressing force: 850 N Weight: 0.1 kg Special features Heavy-duty holding arm Safety locking mechanism Vertical base (upright foot) Lever-operated clamp (hebelspanner) Blackened finish FAQ What is the maximum holding force of this clamp? The 112 horizontal clamp from Kukamet offers a maximum holding force of 1,000 N (SKU B112-1-D-L-C3). Can the clamp be mounted on vertical or horizontal fixture plates? Mounting is designed for a vertical base; the clamp secures parts in a horizontal orientation at a 90° locking angle. Is the clamp suitable for use in compact jigs and multi-level fixtures? Yes — the 143 mm arm length and compact base make the clamp appropriate for tight layouts and stacked jigs. What protection does the finish provide against workshop conditions? The clamp has a blackened finish that gives surface-level protection appropriate for general workshop environments. Who supplies technical advice and delivery for this clamp? Metav Werkzeuge handles supply and can provide configuration advice for the Kukamet 112 horizontal clamp; contact details are available through Metav Werkzeuge. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 143mm Horizontal Clamp With Solid Holding Arm, 850N Thrust / 1000N Hold - Kukamet
Take advantage of the combination of precise holding power, compact design and corrosion-resistant finish for reliable jig and fixture performance; order directly via Metav Werkzeuge or consult our team for integration advice. 111 Horizontal toggle clamp — 143 mm arm, galvanised, Kukamet The 111 horizontal toggle clamp is a compact, right-angle clamping solution for jigs, fixtures and assembly stations, designed to deliver consistent holding at 90° in industrial production environments Solid holding arm for durable retention 143 mm arm for extended reach Galvanised finish for corrosion resistance Horizontal base mounting for easy fixture integration Secure, measurable clamping for production environments A compact workholding device that combines a defined clamping force (850 N) with a high holding force (1000 N) to keep components immobile during machining, assembly and inspection. The clamp’s fixed 90° clamping angle ensures repeatable positioning, reducing rework and setup time. Engineers benefit from the clear, quantifiable performance values when planning fixture load cases and cycle times, making this an efficient choice for small- to medium-batch production where reliable fixation directly improves throughput and process stability. Space-saving design that integrates quickly into fixtures With a 143 mm arm, a horizontal base for mounting and a solid holding arm, this clamp fits into compact jigs without sacrificing leverage or user access. The galvanised finish delivers basic corrosion protection, lowering the need for frequent surface maintenance in typical workshop conditions. At just 0.152 kg, the device is light enough to add to modular fixtures without significantly increasing inertia, while the robust lever geometry permits fast manual operation and straightforward mechanical integration into existing clamping arrays. Confidence through dependable supply and workshop-ready build Manufactured by Kukamet and distributed via Metav Werkzeuge, this clamp is intended for users who require pragmatic, repeatable workholding rather than bespoke solutions. The proven mechanical concept and visible galvanised surface give workshop managers confidence in long-term usability, while Metav’s European logistics and quality-filter approach provide reassurance for procurement: consistent availability, clear specifications and practical compatibility with standard fixtures. The combination of measurable force values and compact construction supports rational investment decisions for production tooling. For dependable jigs and fast fixture builds, request a technical quote for the Kukamet 111 horizontal toggle clamp from Metav Werkzeuge — contact the Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and delivery options. Technical data SKU: 111-1-D-C3 GTIN: 8680731505610 Model: 111 Manufacturer: Kukamet Category: Spanner Facts Weight: 0.152 kg Arm length: 143 mm Clamping force (max): 850 N Holding force (max): 1000 N Angle: 90° eClass: 21041719 ETIM: EC011973 Special features Material: galvanised Mounting: horizontal base Solid holding arm Catalogue page: 111-D-katalogseite.pdf Image available: 111-D-main.jpg FAQ What maximum clamping and holding forces does the clamp provide? The Kukamet 111 horizontal toggle clamp delivers a clamping force up to 850 N and a holding force up to 1000 N, values suitable for many light to medium-duty fixture applications. How is the clamp mounted in a fixture? Mounting is via a horizontal base; the clamp’s flat foot allows secure attachment to plates and modular fixture components for consistent 90° workholding. Is the surface treatment suitable for workshop environments? Yes — the clamp is galvanised, providing basic corrosion resistance that reduces routine maintenance in typical workshop and assembly settings. Which reach and footprint should be expected when integrating into a jig? The device features a 143 mm arm, offering extended reach for clamping over larger workpieces while maintaining a compact footprint thanks to its low weight and horizontal mounting. Is the clamp suitable for repetitive production use? The solid holding arm and repeatable 90° position make the clamp well suited to repetitive tasks where consistent workpiece fixation is required; specification values assist in planning fixture duty cycles. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 158mm Horizontal Clamp With Heavy Duty Arm, Safety Lock, 2.5kN Hold Force - Kukamet
Robust horizontal clamping with a 158 mm reach, up to 2,500 N holding force and a secure safety lock provides dependable fixture retention — order via Metav Werkzeuge or consult their specialists for application advice. Horizontal clamp 113 — horizontal toggle clamp with 158 mm arm and 2,500 N holding force (Kukamet) The Horizontal clamp 113 is a compact toggle clamp designed for secure horizontal clamping in jigs and fixtures, combining a sturdy angle-foot mount with a safety locking mechanism for repeatable workshop use. Massive holding arm with safety lock 158 mm reach for wide clamping range Up to 2,500 N holding force Consistent, measurable clamping for production reliability The clamp delivers a defined holding force of 2,500 N and a maximum pressing force of 2,300 N, values that are important when specifying fixtures for repeatable processes. A defined clamping value gives planners and operators a quantifiable basis for fixture design, allowing predictable part retention under machining or welding loads. The integrated safety lock prevents accidental release during handling, reducing the risk of lost set-ups and rework; this mechanical lock is especially valuable in batch production and assembly lines where interruption is costly. Simple mounting and extended reach for flexible fixturing Fitted with an angle-foot mount, the clamp is intended for horizontal installation on plates and tooling blocks, enabling low-profile fixture layouts. The 158 mm arm extends the clamping range, making the device suitable for holding larger or irregularly shaped components without needing elaborate adapters. The 90° closing travel ensures a clear, stable clamping movement; in practice this means fewer adjustments during setup and faster changeovers between jobs, supporting efficient workflow on the shop floor. Durable finish and compact mass for easy integration Finished in a blackened surface treatment, the clamp resists corrosion and presents a low-glare, professional appearance within a toolroom or production cell. Despite its robust construction — including a massive holding arm — the unit weighs only 0.42 kg, which simplifies fixture handling and transport when jigs are reconfigured. The combination of a compact footprint, hardened load-bearing elements and a secure lock provides long-term stability and reduces maintenance intervals, supporting continuous operation with minimal downtime. For reliable clamping solutions from Kukamet, contact Metav Werkzeuge for tailored advice and purchasing information — eMail info@metav-werkzeuge.com or telephone +49 2822 7131930. Technical data Article number: B113-3-D-L-C3 Model: 113 Category: Spanner Manufacturer: Kukamet Facts Holding force: 2,500 N Max pressing force: 2,300 N Arm length: 158 mm Angle: 90° Weight: 0.42 kg eClass: 21041719 ETIM: EC011973 Special features Mounting type: angle foot Finish/material: blackened (Schwarz brüniert) Massive holding arm Safety locking mechanism Compact toggle clamp for horizontal use FAQ What materials can be clamped with this device? The horizontal clamp 113 is intended for mechanical clamping of metals and rigid components; its 2,500 N holding force suits common workshop materials in jigs and fixtures. How is the clamp mounted to a fixture plate? Mounting is by an angle-foot base, which secures the clamp to tooling plates or blocks in a horizontal orientation for straightforward integration into existing jigs. Does the clamp include a locking feature to prevent accidental opening? Yes — the unit incorporates a safety lock that secures the toggle in the closed position, reducing the risk of unintended release during handling or machining. Is the clamp suitable for repeated production cycles? The robust construction and defined clamping values make this toggle clamp appropriate for repeated use in batch production and assembly operations, supporting consistent part retention. What is the reach of the clamping arm and why does it matter? The 158 mm arm provides extended reach for larger components or fixtures where additional clearance is required, enabling flexible placement of clamping points. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 158mm Horizontal Clamp With Massive Holding Arm And Safety Lock, Galvanised - Kukamet
Combining a galvanised construction with a massive holding arm and an integrated safety locking mechanism delivers dependable right-angle clamping with consistent repeatability; the compact 158 mm reach and rated forces ensure secure workholding across light industrial and workshop tasks. Order the horizontal clamp directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 113 — right-angle clamp with massive arm (Kukamet) The Horizontal clamp 113 is a compact right-angle clamp designed for reliable fixture and repeatable holding in workshop and light industrial applications. Massive holding arm with safety lock Galvanised construction for corrosion resistance 158 mm reach for versatile fixturing Clamping force up to 2,300 N Dependable clamping performance for production workflows Built around a massive holding arm and an integrated safety lock, this clamp provides stable retention during repetitive operations. The unit’s clamping force (max) 2,300 N and holding force (max) 2,500 N are engineered to maintain component position under process loads, reducing rework and setup time. For engineers and workshop managers the result is increased uptime and fewer interruptions during series production or jigs-on-fixtures work. Robust materials and low-maintenance design for everyday use Constructed from galvanised steel, the clamp resists corrosion in typical workshop environments and keeps maintenance cycles short. Despite a solid build the device remains compact at 0.42 kg, which simplifies fixture design and handling during tool changes. The combination of a durable finish and mechanical simplicity supports long service life, making the clamp a practical option where predictable, low-maintenance fixturing is required. Easy integration into right-angle fixtures and jigs The clamp is supplied with an angle foot mounting that positions the arm at a 90° angle for standard right-angle clamping tasks, and the 158 mm arm length provides a practical reach for a range of workpiece sizes. The compact footprint facilitates placement in confined fixture spaces while allowing mechanical access for the lever or actuating tool. Clear numeric data on reach and forces simplifies integration into CAD layouts and fixture specifications. For reliable right-angle clamping with Kukamet’s robust design, contact Metav Werkzeuge for stock status and specification advice — info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 113-3-D-L-C3 GTIN: 8680731500882 eClass: 21041719 ETIM: EC011973 Numbers / Core technical data Arm length: 158 mm Clamping force (max): 2,300 N Holding force (max): 2,500 N Angle: 90° Weight: 0.42 kg Design / Special features Material: galvanised steel Mounting: angle foot Massive holding arm Safety locking mechanism Category: Clamps (Spanner) Manufacturer: Kukamet FAQ What is the maximum clamping force of this clamp? The maximum clamping force is 2,300 N; the Horizontal clamp 113 is specified with a holding force of 2,500 N for secure retention. Which mounting orientation does the clamp support? The clamp is supplied with an angle foot for right-angle (90°) mounting, allowing direct integration into standard jig and fixture plates. What is the arm reach and how does it affect fixture design? The arm length is 158 mm, providing a practical reach for a variety of workpiece sizes while maintaining a compact fixture footprint. What material is used and how does it perform in workshops? The construction is galvanised steel, chosen for corrosion resistance and low maintenance in typical workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 158mm Horizontal Clamp With Massive Holding Arm, 2.5 kN Hold Force - Kukamet
Combining a 158 mm solid holding arm, a robust 90° angled base and up to 2,500 N holding force, the Horizontal clamp 113 delivers secure, repeatable clamping for assembly, welding and jigging applications; order the clamp directly via Metav Werkzeuge or request tailored application advice from our specialists. Horizontal clamp 113 — Horizontal clamp with 158 mm arm and 2,500 N holding force (Kukamet) A compact Horizontal clamp 113 designed for right-angle fixtures and workshop jigs, providing reliable clamping at a fixed 90° orientation with a solid holding arm and blackened finish Solid 158 mm holding arm Up to 2,500 N holding force Blackened finish for corrosion resistance 90° angled base for right-angle mounting Secure, repeatable clamping for fixtures and jigs The Horizontal clamp offers a high level of repeatability thanks to its solid holding arm and defined mounting angle. With a holding capacity of 2,500 N and a clamping force rated at 2,300 N, the component secures workpieces reliably during assembly and light machining tasks. The compact form factor and consistent clamping characteristics reduce setup time and minimise rework, enabling a smoother production flow for small-batch and series processes. The technical specification supports predictable results across repeated cycles, which is essential for jigs, welding fixtures and quality-controlled assembly. Built for intensive workshop use and long service life A massive arm construction combined with a blackened finish provides mechanical robustness and surface protection against corrosion. The solid arm resists bending and wear under frequent use, while the blackened surface treatment delivers improved resistance to oxidation compared with untreated steel. At only 0.432 kg, the clamp balances durability with a lightweight design that is easy to integrate into portable fixtures. These attributes make the clamp suitable for workshop environments where frequent operation and resilience are priorities. Straightforward integration into right-angle assemblies The clamp’s 90° angled base is engineered for mounting on vertical or horizontal plates, offering space-saving installation and fast positioning in jigs and tooling plates. An arm length of 158 mm provides an extended reach for securing larger components without compromising stability. The angled foot simplifies alignment on welding tables and assembly fixtures, while the compact footprint keeps adjacent tooling accessible. Numeric ratings for clamping and holding force allow planners to verify suitability for specific materials and processes before installation. For dependable workshop clamping, request the Kukamet Horizontal clamp 113 from Metav Werkzeuge in Emmerich—our specialists provide application guidance and can advise on integration; contact +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: B113-3-D-C3 GTIN: 8680731507478 eClass: 21041719 ETIM: EC011973 Weight: 0.432 kg Facts Arm length: 158 mm Max clamping force: 2,300 N Max holding force: 2,500 N Angle: 90° Special features Material: blackened finish Mounting type: angled base Solid holding arm Compact design for fixtures FAQ What clamping and holding forces does the clamp provide? The Kukamet Horizontal clamp 113 offers a maximum clamping force of 2,300 N and a maximum holding force of 2,500 N, specified for predictable fixture performance. Is the clamp suitable for welding fixtures and assembly jigs? Yes, the blackened finish and 90° angled base make the clamp well suited for welding tables and assembly jigs where right-angle mounting and corrosion resistance are beneficial. How long is the holding arm and what benefit does this provide? The holding arm is 158 mm long, providing extended reach for securing larger components while maintaining stability in the fixture. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 160mm Horizontal Clamp With Massive Holding Arm And Safety Lock, 1,200 N Holding Force - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines a robust 160 mm clamping arm, reliable 1,000 N clamping force and a secure safety latch to keep fixtures steady during assembly and welding operations. Order the clamp via Metav Werkzeuge or ask the consultants for application advice. Horizontal toggle clamp 113 — galvanised lever clamp with 1,000 N force (Kukamet) The Horizontal toggle clamp 113 is a horizontal lever clamp designed for secure workholding in jigs, fixtures and assembly stations where a 90° actuation and angle base mounting are required Robust 160 mm clamping arm Galvanised for corrosion resistance 1,000 N clamping force 1,200 N maximum holding force Consistent clamping performance for production use The clamp delivers 1,000 N clamping force and a 1,200 N maximum holding force, providing a measurable basis for selecting the right component for repeatable processes. The 160 mm arm length offers good reach for medium-sized workpieces while the galvanised finish minimises surface degradation in industrial environments. These objective parameters support predictable cycle times and reduce rework caused by movement during machining or joining. Secure design that reduces process interruptions A safety latch and a robust clamping arm ensure that the clamp remains locked under load, lowering the risk of accidental release during handling. The angle base (Winkelfuß) and 90° lever geometry enable straightforward integration into existing fixtures, enabling stable, perpendicular clamping without complex adapters. The combination of mechanical locking and a solid build contributes directly to operator confidence and uninterrupted production runs. Compact installation and material compatibility explained At a weight of 0.27 kg, the device is compact and easy to fit into multi-clamp assemblies without significantly increasing fixture mass. The galvanised coating provides sacrificial zinc protection against corrosion, making the clamp suitable for use in standard workshops and sheltered production areas. Typical applications include assembly, welding jigs and light fabrication where a durable, reliable toggle clamp is required rather than heavy-duty hydraulic clamping. For reliable workholding with measurable performance, request a specification sheet or a quotation from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for technical advice and rapid delivery options Technical Data SKU: 113-2-D-L-C3 GTIN: 8680731500806 Weight: 0.27 kg Clamping force: 1,000 N Holding force: 1,200 N Arm length: 160 mm Actuation angle: 90° Facts eClass: 21041719 ETIM: EC011973 Special features Galvanised material Angle base mounting Robust clamping arm Safety latch / safety locking mechanism Category: Toggle clamp / Spanner FAQ What clamping and holding forces does the clamp provide? The Horizontal toggle clamp 113 offers a clamping force of 1,000 N and a maximum holding force of 1,200 N, suitable for repeatable fixture work. How is the clamp mounted in a fixture? Mounting uses an angle base, allowing the clamp to be fixed at 90° orientation in jigs and assembly fixtures. Is the clamp suitable for outdoor or wet environments? The galvanised coating gives corrosion resistance for standard workshop conditions; however, continuous exposure to harsh outdoor environments is not specifically stated. Which applications is this toggle clamp designed for? The clamp is intended for assembly, welding jigs and light fabrication where a compact, reliable horizontal toggle clamp is required. What is the model or SKU for ordering? Order reference: SKU 113-2-D-L-C3 (Horizontal toggle clamp 113) Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 160mm Horizontal Clamp With Solid Holding Arm, 1,000N Thrust / 1,200N Hold - Kukamet
Take advantage of a robust, corrosion‑resistant clamp that combines a massive holding arm with proven clamping and holding forces for reliable fixture in production. Order the Horizontal clamp 113 directly via Metav Werkzeuge or contact our consultants for technical advice. Horizontal clamp 113 — zinc‑plated horizontal clamp with 160 mm arm (Kukamet) Horizontal clamp 113 is a compact lever clamp designed for secure 90° fixturing and repeatable holding in workshops and assembly lines. Zinc‑plated corrosion protection Massive 160 mm holding arm 90° angle base for secure mounting Holding force 1,200 N, clamping 1,000 N Proven clamping performance for repeatable fixtures The lever clamp provides measurable performance: a 1,200 N holding force and 1,000 N clamping force, which translate into reliable retention of components during machining, assembly or inspection. The 160 mm arm increases reach without compromising stability, while the massive holding arm design reduces deflection under load. These quantifiable values support efficient process planning and reduce the need for repeated adjustments, improving cycle consistency on the shop floor. Corrosion resistance and compact installation benefit workflow A zinc‑plated finish protects the clamp against rust in humid workshop environments, extending service life and lowering maintenance intervals. The unit’s compact footprint and 90° angle base make it straightforward to integrate into existing fixtures or modular tooling plates, saving assembly time. At an installed weight of approximately 0.306 kg, the clamp adds minimal mass to the tooling setup, allowing for dense fixture arrangements without overloading positional supports. Robust design that reduces downtime and simplifies handling Constructed with a massive holding arm and a lever mechanism, the clamp offers tactile, positive actuation and quick engagement for frequent operations. The construction focuses on longevity and low maintenance: durable materials and simple geometry mean fewer wear parts and predictable replacement cycles. For operations that prioritise uptime, this clamp delivers a balance of strength and ease of use, supporting steady production and trusted repeatability. Secure production reliability with Kukamet’s Horizontal clamp 113—contact Metav Werkzeuge for tailored technical advice or a detailed application recommendation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 113-2-D-C3 GTIN: 8680731500776 eClass: 21041719 ETIM: EC011973 Core specifications Arm length: 160 mm Weight: 0.306 kg Holding force: 1,200 N Clamping (max.) force: 1,000 N Mounting angle: 90° Materials & features Material surface: zinc‑plated Mounting type: angle base Design: lever clamp with massive holding arm Model: 113 FAQ How much force does the clamp apply and hold? The Kukamet Horizontal clamp 113 provides a clamping force of 1,000 N and a holding force of 1,200 N, specified for predictable fixture retention in industrial applications. Is the clamp suitable for use in humid or corrosive workshop environments? Yes, the zinc‑plated surface on the Kukamet clamp offers corrosion resistance appropriate for standard workshop conditions, helping to extend service intervals. Can the clamp be mounted on standard fixturing plates at 90°? The clamp features an angle base designed for secure 90° mounting, making it compatible with many fixture plates and modular tooling systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 162mm Pneumatic Clamp With Vertical Handle And Heavy-Duty Arm, 1,200N Clamp Force - Kukamet
Combining a galvanised construction, a vertical-foot mounting and up to 1,400 N holding force, this lever-actuated pneumatic clamp delivers secure, repeatable clamping for demanding production tasks. Order the clamp directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Pneumatic clamp 651 — Vertical-handle lever clamp by Kukamet The Pneumatic clamp 651 is a vertical-foot lever clamp designed for secure, repeatable fixture operations in production and assembly environments. Vertical handle with robust holding arm Vertical-foot mounting for compact installation Galvanised finish for corrosion resistance Up to 1,400 N holding force Reliable clamping that keeps production moving The pneumatic lever design ensures fast, consistent actuation and repeatable results under high throughput. With a maximum pressing force of 1,200 N and a maximum holding force of 1,400 N, the device provides measurable clamping performance that reduces rework and inspection time. Pneumatic actuation converts compressed-air input into a controlled linear motion, meaning cycle times can be shortened without sacrificing clamp stability. This consistent force delivery supports quality assurance routines and streamlines fixture setups in batch production and assembly lines. Built for durability and low maintenance Constructed with a galvanised finish and a massive holding arm, the clamp resists corrosion and wear in standard workshop atmospheres. The vertical handle and robust arm geometry distribute loads evenly, lowering component fatigue and extending service intervals. Simple pneumatic operation keeps mechanical complexity to a minimum, so routine upkeep focuses on air supply quality and occasional lubrication rather than frequent part replacement. The result is a durable clamping solution that maintains performance with modest maintenance effort. Space-efficient integration into jigs and fixtures Thanks to the vertical-foot mounting and a 90° clamping angle, the unit fits neatly into compact fixture arrangements and saves valuable bench or machine-bed space. The vertical handle orientation facilitates close-packed layouts and allows neighbouring clamps to be positioned without interference. Its lever-style kinematics make it suitable both for manual assembly stations and for automated systems where reliable clearance and repeatability are essential. The compact footprint aids retrofitting into existing tooling without extensive fixture redesign. Suited applications and operational benefits Ideal for assembly jigs, welding fixtures, machining preparation and general-purpose workholding, the clamp supports processes where reproducible clamp force and quick actuation are priorities. The combination of galvanised surfaces, strong arm construction and pneumatic control improves uptime and contributes to consistent product quality across runs. When integrated into standardised fixtures, the device helps reduce setup times and supports lean production practices by providing dependable, measurable clamping performance. Contact Metav Werkzeuge for tailored advice on the Kukamet pneumatic clamp 651 and to confirm availability and delivery options from Emmerich. Technical data SKU: 651-2-H-D-C3 Type: Pneumatic clamp 651 Manufacturer: Kukamet eCl@ss: 21021004 ETIM: EC011973 Facts Arm length: 162 mm Angle: 90° Pressing force (max): 1,200 N Holding force (max): 1,400 N Special features Galvanised material finish Vertical handle and massive holding arm Vertical-foot mounting (senkrechter Fuß) Lever clamp design With vertical handle and robust holding arm FAQ What is the maximum holding force of this clamp? The Kukamet pneumatic clamp 651 provides a maximum holding force of 1,400 N and a pressing force up to 1,200 N for repeatable fixture security. How is the clamp mounted to a fixture? Mounting is via a vertical-foot arrangement; the unit is designed for compact installation with a 90° clamping orientation. What material and finish does the clamp have? The clamp is made with a galvanised finish and features a massive holding arm for increased durability. Is this clamp suitable for automated production lines? Yes — the pneumatic actuation and compact lever geometry make it suitable for integration into automated fixtures and assembly jigs where repeatability is required. Which SKU and classification codes identify this product? The product is listed as SKU 651-2-H-D-C3, eCl@ss 21021004 and ETIM EC011973. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 166mm Horizontal Clamp With Massive Arm, Safety Lock, 1,000N Thrust / 1,200N Hold, Galvanised - Kukamet
Take advantage of a compact, galvanised lever clamp that combines 1,200 N holding force, a 1,000 N clamping force and a robust safety lock for reliable fixture work; order directly via Metav Werkzeuge or request consultation from our specialists. Horizontal clamp 111 — Kukamet horizontal lever clamp, galvanised, 90° angle The Horizontal clamp 111 is a compact, galvanised lever clamp designed for secure 90° workholding in jigs, assembly fixtures and welding stations. Galvanised corrosion protection 1,200 N holding force for secure retention 1,000 N maximum clamping force 90° lever action with safety lock Consistent clamping performance for production workflows The clamp delivers a defined maximum clamping force of 1,000 N and a holding force of 1,200 N, values given to support predictable setup times and repeatable results on the shop floor. The difference between clamping and holding force indicates the unit’s ability to apply pressure during operation and to resist workpiece movement once engaged; this distinction is important for fixture design and for ensuring parts remain stationary during machining or welding. The lever mechanism provides quick engagement and disengagement, reducing non-productive time and improving throughput in batch production. Durable finish and heavy-duty arm for long service life Constructed from galvanised steel, the clamp offers corrosion protection suited to industrial environments where moisture and welding spatter can be present. A massive holding arm and an integrated safety lock increase operational reliability; the locking feature prevents accidental release under vibration or thermal cycling. The overall build and choice of materials mean less frequent replacement and lower lifecycle disruption, which supports a cost-effective investment in fixturing components. Compact footprint and simple integration into fixtures With an arm length of 166 mm and a compact mass of 0.2 kg, the unit is suited to space-conscious fixtures and portable jigs. The horizontal base mounting allows secure attachment to flat surfaces at a 90° orientation, while the lever-style action eases handling in confined spaces. The compact design enables flexible placement within assemblies and makes it straightforward to standardise clamping elements across multiple fixtures, which simplifies spare-part inventories and speeds up assembly changes. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet horizontal clamp 111 into existing fixtures and to arrange delivery directly from Emmerich Technical data Article number: 111-2-D-L-C3 GTIN: 8680731500110 SKU: 111-2-D-L-C3 eClass: 21041719 ETIM: EC011973 Manufacturer: Kukamet Data Arm length: 166 mm Angle: 90° Maximum clamping force: 1,000 N Maximum holding force: 1,200 N Weight: 0.2 kg Special features Material: galvanised steel Mounting: horizontal base Massive holding arm and safety lock Lever clamp design Suitable for fixtures, jigs and welding applications FAQ What are the main force ratings of this clamp? The clamp provides a maximum clamping force of 1,000 N and a holding force of 1,200 N for secure retention during machining and assembly operations. Is the clamp suitable for welding fixtures? Yes, the galvanised finish and robust construction make the clamp appropriate for welding and fabrication fixtures where reliable hold and corrosion resistance are required. How is the clamp mounted to a fixture? Mounting is via a horizontal base; the 90° orientation and compact arm length of 166 mm allow straightforward integration into flat-fixture surfaces. Does the clamp include a safety mechanism? The unit features a safety lock and a massive holding arm to prevent accidental release under vibration or thermal stress. What is the product’s weight and how does that affect handling? Weighing 0.2 kg, the clamp has a low mass that eases installation and alignment in multi-point fixtures while maintaining the specified clamping and holding forces. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 166mm Horizontal Clamp With Solid Arm And Safety Lock, 1,200 N Hold Force - Kukamet
Reliable clamping and simple integration are combined in this lever-style horizontal clamp: the robust massive holding arm and safety locking mechanism ensure repeatable workholding while the compact footprint supports tight fixture layouts. Order directly via Metav Werkzeuge or request advice from our consultants for quick procurement and technical guidance. Horizontal clamp 112 — Kukamet, massive holding arm & 1,000 N closing force The Horizontal clamp 112 is a lever-type fixture clamp for secure 90° workholding in jigs, assemblies and production fixtures. Horizontal clamp »112« by Kukamet Massive holding arm with safety lock 1,000 N closing force, 1,200 N holding force 90° lever action with vertical base Secure, repeatable clamping that protects process quality The lever mechanism delivers a consistent 1,000 N closing force with a 1,200 N holding capability, providing stable fixation for repetitive operations. The combination of a massive holding arm and an integrated safety lock reduces the risk of workpiece displacement during handling and secondary operations. For production environments where cycle-to-cycle reliability affects throughput and scrap rates, this clamping solution contributes directly to process stability and predictable results. Compact footprint for dense fixtures and straightforward integration With an arm length of 166 mm and a slim mounting arrangement, the clamp fits into compact jig designs while preserving clear access to the workpiece. The vertical base mounting and 90° lever action make the unit suitable for standard fixture plates and stacked assemblies. At approximately 0.2 kg, the device offers a favourable strength‑to‑weight ratio, allowing multiple clamps to be installed without excessive load on the fixture structure. Durable finish and mechanical safety for workshop use The component is supplied with a blackened finish, providing a professional appearance and a factory-treated surface. The lever design and robust bracketry are engineered to withstand repeated actuation in daily workshop and light industrial settings. The built-in safety locking mechanism secures the clamp in the closed position and supports safer handling during transfer or manual machining steps, reducing the chance of accidental release. Practical advantages for jig builders and production teams As a lever clamp, the unit speeds up manual setup and repeatable positioning, thereby reducing fixture changeover times. The straightforward mechanical function permits quick visual checks and fast actuation during assembly sequences, supporting operational efficiency. In custom jigs or modular fixture systems, the device functions as a reliable mechanical element that helps maintain repeatability across shifts and operators. For reliable, compact clamping from Kukamet choose the Horizontal clamp 112 — contact Metav Werkzeuge in Emmerich for procurement guidance and integration advice: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: B112-2-D-L-C3 Manufacturer: Kukamet eClass: 21041719 ETIM: EC011973 Facts Closing force: 1,000 N Holding force: 1,200 N Arm length: 166 mm Angle: 90° Weight: 0.2 kg Special features Massive holding arm Safety locking mechanism Vertical base mounting Blackened finish Lever clamp design FAQ What maximum forces does the clamp provide? The Horizontal clamp 112 provides a closing force of 1,000 N and a holding force of 1,200 N (SKU B112-2-D-L-C3) for reliable fixture retention. How is the clamp mounted in a fixture? Mounting is performed via a vertical base arrangement; the clamp uses a 90° lever action suitable for standard fixture plates and jig applications. Which applications are most suitable for this lever clamp? This lever-type clamp is intended for jigs, assembly fixtures and production setups where rapid, repeatable clamping and manual access are required. What surface treatment does the device have and why does it matter? The unit is supplied with a blackened finish, a factory surface treatment that provides a consistent appearance and basic surface protection for workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 166mm Horizontal Clamp With Solid Holding Arm, 1,000 N Closing Force, Zinc-Plated - Kukamet
Taking advantage of a robust zinc‑plated construction, a 166 mm massive holding arm and a reliable holding force of 1,200 N, this clamp combines secure workholding with compact mounting for efficient jig and fixture design. Order the clamp directly via Metav Werkzeuge or ask our consultants for application advice. Horizontal clamp 111 — Kukamet horizontal lever clamp with 166 mm arm, zinc‑plated The Horizontal clamp 111 is a horizontal lever clamp designed for secure 90° clamping in fixtures, jigs and light assembly operations, offering stable holding and compact installation on a horizontal base 166 mm robust holding arm Zinc‑plated corrosion protection Horizontal base for 90° clamping Holding force up to 1,200 N Secure, measurable clamping for repeatable results The clamp delivers a clear technical advantage through defined force values: a clamping force of 1,000 N for the active clamping stroke and a holding force of 1,200 N once the mechanism is engaged. These figures translate directly into process reliability — components remain immobile during machining or assembly, reducing rework and scrap. The toggle-style action ensures a short travel to full clamp, offering quick cycle times in repetitive operations and predictable performance in serial production. Compact mounting that saves space and simplifies fixtures With a 166 mm holding arm and a horizontal base configuration at a 90° orientation, the unit fits neatly into tight fixture geometries while providing a long reach for workpieces. The light overall mass (0.254 kg) reduces the load on jig plates and makes multiple units easier to integrate without adding significant weight. The horizontal foot mounting is suited to plate- or fixture-mounted applications where clearance above the workpiece is limited, allowing streamlined fixture design and faster setup. Corrosion protection and straightforward maintenance for durable use Constructed from zinc‑plated material, the clamp resists routine workshop humidity and light contamination, extending service life with minimal upkeep. The massive holding arm provides stiffness and limits deformation under load, while the simple lever mechanism requires only occasional inspection and lubrication. For light to medium production environments, this combination of surface protection and robust components delivers long-term value and less downtime for parts replacement. For robust, reliable clamping with Kukamet build quality and fast supply from Emmerich, request Metav Werkzeuge’s application advice and secure your fixtures today: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 111-2-D-C3 GTIN: 8680731500080 Manufacturer: Kukamet Facts Arm length: 166 mm Angle: 90° Weight: 0.254 kg Clamping force: 1,000 N Holding force: 1,200 N eClass: 21041719 ETIM: EC011973 Special features Material: zinc‑plated Mounting: horizontal base Massive holding arm Category: clamp / spanner FAQ What is the difference between clamping force and holding force? Clamping force refers to the applied force during the active clamping motion (the clamping force of 1,000 N), while holding force is the residual force maintained after engagement (the holding force of 1,200 N) that keeps the workpiece secure. Can the clamp be mounted on standard fixture plates? Yes, the Horizontal clamp 111 is designed for plate mounting via its horizontal base and integrates easily into standard jig and fixture plates. Is the surface finish suitable for humid workshop environments? The zinc‑plated surface provides corrosion protection suitable for typical workshop conditions and helps prolong the service life under light to medium production use. What are typical applications for this type of lever clamp? Common uses include jigs, fixtures, assembly stations and light machining where a reliable 90° clamping action and compact installation are required. Does the clamp require special maintenance? Maintenance is straightforward: periodic inspection, light lubrication of the pivot points and checking fastenings; no specialised servicing is necessary for standard operation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 166mm Horizontal Clamp With Vertical Base, Massive Arm & Safety Lock, Zinc-Plated - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines a massive holding arm, a secure safety lock and reliable clamping forces to keep production steady; order the clamp via Metav Werkzeuge or consult our specialists for application advice. Kukamet Horizontal clamp 112 — galvanised lever clamp with safety lock Kukamet Horizontal clamp 112 is a horizontal lever clamp designed for secure, repeatable workpiece holding in fixtures and jigs, suited to light and medium-duty assembly and welding tasks. Massive holding arm with safety lock Galvanised finish for corrosion resistance Max holding force 1,200 N Compact design with 90° clamp angle Secure clamping that keeps processes moving The clamp delivers a consistent holding force thanks to a robust lever and a solid support arm. With a maximum holding force of 1,200 N and a pressing force of 1,000 N, the device is engineered to secure components reliably during machining, assembly or welding operations. The galvanised construction ensures resistance to rust in workshop environments, reducing downtime for replacement or refurbishment. The vertical foot mounting allows straightforward installation into existing fixtures, supporting efficient line integration and minimising setup time. Built for safety and repeatability on the shop floor A safety lock prevents accidental release, increasing operator safety where vibration or frequent contact is present. The massive holding arm provides stability and reduces the risk of workpiece movement under load, improving measurement and machining accuracy while lowering scrap rates. The clamp’s 90° angle suits right-angle fixturing, and the compact form factor—at only 0.2 kg—keeps the overall fixture weight low, which is advantageous for portable jigs and modular tooling systems. Practical integration and maintenance advantages The galvanised surface finish offers long-term protection with minimal maintenance, making the clamp economical over its service life. The clamp’s 166 mm arm length gives a good reach for many common fixturing setups while retaining precise control. Designed as a lever-operated horizontal clamp, it is compatible with standard workshop practices and can be combined with other fixtures for customised workholding solutions. Where traceability is required, the product is supplied with a clear SKU and GTIN, facilitating inventory management. Contact Metav Werkzeuge today to discuss integrating the Kukamet Horizontal clamp 112 into your fixtures or to request a tailored application recommendation — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 112-2-D-L-C3 GTIN: 8680731500462 eClass: 21041719 ETIM: EC011973 Facts Arm length: 166 mm Angle: 90° Max holding force: 1,200 N Max pressing force: 1,000 N Weight: 0.2 kg Special features Material: galvanised Mounting: vertical foot Massive holding arm Safety lock Category: clamp / lever clamp FAQ What applications suit this horizontal lever clamp? The horizontal clamp 112 from Kukamet is suitable for fixture work, assembly and light welding where a reliable horizontal clamping action and a 90° orientation are required; the SKU 112-2-D-L-C3 identifies the model. Can the clamp withstand workshop environments with humidity? The galvanised finish on the Kukamet clamp provides corrosion resistance that helps maintain performance in humid workshop conditions. How is the clamp installed in a fixture? The clamp uses a vertical foot mounting arrangement, allowing straightforward bolting into jigs and fixtures for repeatable positioning. Does the clamp offer safety features for vibration-prone processes? Yes, the clamp includes a safety lock that prevents accidental release during operations that involve vibration or repeated contacts. Is this clamp suitable for portable jigs? The compact form and low weight make the clamp appropriate for portable or modular jigs while still delivering up to 1,200 N holding force. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 167mm Horizontal Clamp With Massive Holding Arm And Safety Lock, 5 000 N Holding Force - Kukamet
A robust combination of massive holding arm, safety lock and high clamping capacities ensures secure, vibration-resistant fixturing for production or assembly tasks; order the Kukamet horizontal clamp '113' directly via Metav Werkzeuge or ask our consultants if needed. Kukamet Horizontal Toggle Clamp 113 — heavy-duty horizontal clamp with safety lock Kukamet 113 is a compact horizontal toggle clamp designed for secure, repeatable clamping in jigs, fixtures and assembly stations. Massive holding arm and safety lock Holding force 5,000 N for secure fixturing 167 mm arm for extended leverage and reach Angle base for stable mounting at 90° Secure clamping that reduces rework and downtime The toggle design delivers a consistent clamping force of 4,500 N combined with a holding force of 5,000 N, translating into reliable retention of components during machining, welding or assembly. The mechanical over-centre action converts handle movement into axial pressure with minimal play, which reduces vibration and the risk of part movement. With this behaviour, fixtures benefit from improved repeatability and fewer rejects, supporting tighter process control and shorter cycle-rate variability. Stable mounting and extended reach for versatile fixtures Fitted with an angle base, the clamp fixes at a 90° orientation for secure attachment to plate or fixture frames. The 167 mm arm provides additional reach without compromising stability, reducing the need for secondary support elements. A blackened finish offers basic surface protection and a low-reflective appearance suitable for industrial environments. At a mass of 1.84 kg, the unit is rigid enough for heavy-duty use while remaining simple to integrate into modular clamping systems. Safety and serviceability designed for the workshop The robust construction includes a massive holding arm and an integrated safety lock that prevents accidental release under load, improving operator safety and workpiece protection. The clamp’s lever mechanism is serviceable and compatible with standard mounting patterns, enabling fast replacement or repositioning within production jigs. Identification is simple with SKU B113-5-D-L-C2, allowing consistent sourcing and spare-part management for maintenance schedules. Contact Metav Werkzeuge for delivery and technical guidance on integrating the Kukamet horizontal clamp '113' into existing fixtures — info@metav-werkzeuge.com or +49 2822 7131930; supply from Emmerich ensures dependable availability. Technical data Article number: B113-5-D-L-C2 eClass: 21041719 ETIM: EC011973 Facts Max clamping force: 4,500 N Max holding force: 5,000 N Arm length: 167 mm Mounting angle: 90° Weight: 1.84 kg Special features Material: blackened finish Mounting type: angle base Massive holding arm Safety lock integrated Brand: Kukamet FAQ What clamping and holding forces does this clamp provide? The Kukamet horizontal toggle clamp '113' provides a clamping force of 4,500 N and a maximum holding force of 5,000 N, suitable for demanding fixturing tasks. How is the clamp mounted in a fixture? Mounting is via an angle base fixed at 90°, allowing stable installation on fixture plates or machine tables; the 167 mm arm gives extra reach for awkward parts. Does the clamp have a safety mechanism to prevent accidental opening? Yes, the unit features an integrated safety lock and a massive holding arm to prevent unintended release under load. Is the clamp suitable for production jigs and repeated use? Designed for repeated operation, the toggle mechanism and robust construction make it suitable for production jigs, assembly lines and welding fixtures. How can this clamp be identified for ordering or spares? Use SKU B113-5-D-L-C2 when ordering to ensure consistent supply and correct spare-part matching. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 167mm Horizontal Clamp With Massive Holding Arm And Safety Lock, Zinc-Plated - Kukamet
Dependable workshop clamping with a galvanised finish and a robust 167 mm holding arm ensures steady, repeatable workholding and less rework. The combination of a 5,000 N holding force and an integrated safety locking mechanism provides secure operation for repetitive processes. Order the horizontal clamp 113 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 113 — Kukamet horizontal clamp with galvanised finish and 167 mm arm Horizontal clamp 113 is a lever-style clamp for secure horizontal workholding in jigs, assembly fixtures and general workshop applications Galvanised corrosion-resistant finish 167 mm robust holding arm 5,000 N maximum holding force Safety locking mechanism prevents release Reliable performance for continuous workholding The lever-style clamp delivers a consistent clamping result thanks to a high holding force and a solid mechanical design. With a maximum holding capacity of 5,000 N and a rated clamping force of 4,500 N, the device reduces part movement during machining or assembly, lowering the risk of rejects and rework. The galvanised surface adds corrosion resistance, helping maintain consistent performance over time and supporting productivity in mixed-workshop environments. Secure handling and accident prevention A massive holding arm paired with a safety lock reduces the likelihood of accidental release during handling or vibration-heavy operations. The mechanical lock keeps the lever engaged until intentionally released, which is especially useful in repetitive clamping cycles where operator oversight can vary. This arrangement provides both operational reliability and peace of mind, supporting safer workflows without complex additional safety devices. Flexible mounting and robust construction for workplace integration The clamp’s angled mounting foot (90°) allows firm attachment to fixture plates or bench surfaces and facilitates integration into bespoke jigs. Built from galvanised material and weighing 1.84 kg, the unit balances durability with manageable handling for repositioning or replacement. Simple mechanical design means maintenance is straightforward; periodic inspection and lubrication of the pivot points are normally sufficient to preserve function and longevity. Where this clamp adds value in the workshop The horizontal lever clamp suits fixtures, repeat assembly tasks and production benches where secure, repeatable clamping is required. Its compact footprint and sturdy arm make it a practical choice for confined fixtures or modular tooling setups. The robust construction and locking function support high-cycle operations, offering a cost-effective component for improving process reliability and reducing downtime. For guidance on specifying the Kukamet horizontal clamp 113 and prompt delivery from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 113-5-D-L-C2 GTIN: 8680731501056 Model: 113 Brand: Kukamet Core data Arm length: 167 mm Holding force max: 5,000 N Clamping force max: 4,500 N Weight: 1.84 kg Angle: 90° Special features Material: galvanised Mounting: angled foot Massive holding arm Safety locking mechanism Category: Clamps FAQ What maximum holding force can be expected from this clamp? The horizontal clamp 113 from Kukamet provides a maximum holding force of 5,000 N and a rated clamping force of 4,500 N (SKU 113-5-D-L-C2). Is the clamp suitable for use in humid or corrosive workshop environments? The galvanised finish on the Kukamet horizontal clamp 113 offers corrosion resistance appropriate for many workshop conditions; regular maintenance extends service life. How is the clamp mounted to a fixture or bench? Mounting is via an angled foot (90°), allowing secure attachment to fixture plates or bench surfaces and easy integration into jigs. Does the clamp include a safety mechanism to prevent accidental release? Yes, the unit features a safety locking mechanism combined with a massive holding arm to prevent unintended opening during operations. Can the clamp be used for repetitive production cycles? The durable design, robust arm and locking function make the clamp well suited for high-cycle, repetitive clamping tasks in production or assembly. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com