Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
90° 229mm Horizontal Clamp, Massive Holding Arm With Safety Lock, Zinc-Plated, 4.5kN Pressure - Kukamet
Take advantage of a compact, high-capacity clamp that combines robust holding power and secure locking for reliable fixture work. With a galvanised construction and a 229 mm arm, the unit supports repeatable positioning and reduced downtime; order the clamp directly via Metav Werkzeuge or ask the consultants for application advice. 111 Horizontal clamp by Kukamet — galvanised lever clamp, 90° operation The 111 horizontal clamp is a lever-style horizontal clamp made for fixture and jig applications, offering strong static retention and a compact footprint for workshop and light industrial use. Galvanised construction for corrosion resistance 90° horizontal mounting for compact fixtures Up to 5,000 N holding force for secure retention Massive holding arm with safety lock Dependable clamping that increases process reliability The clamp delivers measurable performance through a clear separation of forces: a clamping force of 4,500 N establishes the working pressure applied by the lever, while a higher holding force of 5,000 N ensures parts remain secure when idle. These figures translate into fewer re-clamping cycles and more consistent production runs, which supports predictable cycle times and less rework. The 229 mm arm provides an extended reach for a range of fixture sizes while keeping the overall footprint small, making the device suitable where space is at a premium. Robust build quality that reduces maintenance needs Constructed from galvanised steel, the unit resists surface corrosion and maintains functional precision in demanding environments. The massive holding arm and integrated safety locking mechanism reduce the risk of accidental release during handling and machining. For operations that require long-term dependability, the mechanical simplicity of this lever clamp minimises wear points and supports straightforward replacement or refurbishment, helping to lower lifecycle costs and unplanned downtime. Simple integration for efficient fixture design Designed for horizontal mounting on a foot base at a 90° operating angle, the clamp integrates with standard fixture plates and jigs without specialised adaptors. Its light weight of 1.4 kg and compact form factor allow rapid positioning and mounting while still providing substantial holding capacity. The lever clamping principle means fast actuation and repeatable clamping cycles, which benefits setups that demand both speed and repeatability. Clear numerical data for arm length, forces and angle facilitates CAD integration and fixture planning. For secure, compact horizontal clamping from Kukamet, contact Metav Werkzeuge for tailored advice and availability; reach out to info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best configuration for specific fixtures Technical data SKU: 111-5-D-L-C3 GTIN: 8680731500363 eClass: 21041719 ETIM: EC011973 Manufacturer: Kukamet Facts Arm length: 229 mm Weight: 1.4 kg Clamping force max: 4,500 N Holding force max: 5,000 N Angle: 90° Special features Material: galvanised Mounting: horizontal foot Massive holding arm Safety locking mechanism Lever-style clamp FAQ What is the difference between clamping force and holding force? The clamping force refers to the active force applied by the lever (4,500 N) while the holding force (5,000 N) indicates the maximum static retention capability of the Kukamet 111 horizontal clamp after actuation. Is the clamp suitable for outdoor or humid workshop environments? Yes, the galvanised finish on the 111 horizontal clamp provides improved resistance to corrosion, making it suitable for humid workshop conditions; regular maintenance still extends service life. Can the clamp be mounted on custom fixture plates? The clamp is designed for horizontal foot mounting at 90°, which allows integration into custom fixture plates and jigs when correct mounting holes and clearances are provided. How compact is the clamp for tight fixture layouts? With a 229 mm arm and a total weight of 1.4 kg, the unit offers a compact footprint while delivering strong holding capacity, making it suited to space-constrained fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 229mm Horizontal Clamp, Massive Holding Arm, 4.5kN Press Force, 5kN Holding Force, Zinc-Plated - Kukamet
Take advantage of a massive holding arm, 5,000 N maximum holding force and a zinc-plated finish for reliable fixture performance in production and workshop environments. The robust design and compact footprint ensure consistent clamping at a 90° orientation; order directly via Metav Werkzeuge or consult our specialists for application advice. Horizontalspanner 111 — horizontal lever clamp with massive holding arm by Kukamet A Horizontalspanner 111 lever clamp designed for secure horizontal mounting in jigs and fixtures, offering a compact 229 mm arm and high clamping capacity for demanding assembly and production tasks. Massive holding arm for secure clamping 5,000 N holding force Zinc-plated body for corrosion resistance Horizontal foot mount, 90° angle Reliable clamping performance for demanding fixtures The Horizontalspanner 111 delivers consistent, reproducible clamping with a maximum holding force of 5,000 N and a maximum clamping force of 4,500 N, values that support stable workholding under repeated cycles. The lever mechanism has been designed to transfer force efficiently while reducing operator effort, which increases throughput and reduces fixture setup time. The compact mass and balanced geometry enable installation in confined jigs while maintaining secure contact pressure, contributing to improved process reliability and shorter downtime between operations. Easy integration and space-saving mounting A horizontal foot mounting configuration and a 229 mm arm length allow for flexible placement on fixture plates and machine tables. The clamp is supplied in a form that permits straightforward bolting to a flat surface, with a fixed 90° operating angle that simplifies positioning during fixture design. The unit’s modest mass of 1.58 kg reduces additional load on assemblies and makes handling and alignment easier during installation, while the robust construction supports long-term, low-maintenance operation. Durable finish and workshop suitability Constructed with a zinc-plated body and a massive holding arm, this horizontal lever clamp is built for workshop conditions where mechanical robustness matters. The surface finish gives basic corrosion protection, extending service life in industrial environments. The compact design and dependable clamping characteristics make the clamp well suited to repeated use in production jigs, assembly fixtures and manual workstations, where secure retention and quick action are priorities. Contact Metav Werkzeuge for an application assessment and fast supply from Emmerich—our consultants will advise on fixture integration and delivery options Technical data Article number: 111-5-D-C3 GTIN: 8680731500332 SKU: 111-5-D-C3 Core specifications Max holding force: 5,000 N Max clamping force: 4,500 N Arm length: 229 mm Weight: 1.58 kg Angle: 90° Special features Material: zinc-plated Mounting: horizontal foot Massive holding arm Category: clamp FAQ What holding force does the clamp provide? The Horizontalspanner 111 from Kukamet provides a maximum holding force of 5,000 N and a maximum clamping force of 4,500 N (SKU 111-5-D-C3). How is the clamp mounted in a fixture? Mounting is via a horizontal foot; the clamp is designed for bolting to a flat surface and operates at a fixed 90° angle for straightforward integration. What is the arm length and overall mass? The lever arm extends 229 mm and the unit weighs 1.58 kg, allowing compact installation without excessive added mass. Is the clamp suitable for repeated production use? Yes, the zinc-plated body and massive holding arm are intended for regular operation in production jigs and workshop fixtures where reliable retention is required. Which brand manufactures this clamp? This clamp is supplied by Kukamet and listed under SKU 111-5-D-C3 for workshop and fixture applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 229mm Horizontal Clamping Lever Spindle, Massive Holding Arm, 5 000N Holding Force - Kukamet
Take advantage of a compact, heavy-duty lever clamp that combines a massive holding arm, a vertical base for secure mounting and a long 229 mm reach for flexible fixture design; order the clamp directly via Metav Werkzeuge or consult the specialists for application advice. Horizontal clamp 112 — Kukamet horizontal lever clamp with 229 mm arm and 5 kN holding force The Horizontal clamp 112 is a robust lever clamp designed for horizontal workpiece fixation in jigs, fixtures and assembly stations, offering a vertical-base mounting and a 90° clamping angle for stable, repeatable clamping. Massive holding arm Vertical base mounting 229 mm arm length Up to 5,000 N holding force Consistent clamping performance for productive workflows The clamp delivers reliable, measurable clamping forces: a holding force of 5,000 N and a pressing force of 4,500 N, enabling secure fixation of medium-duty components during machining, assembly or inspection. These quantified values support process stability and allow planners to size fixtures with confidence, reducing rework and downtime. The lever operation ensures quick actuation and repeatable force transmission, which is particularly advantageous where cycle times and consistency matter. The documented force ratings provide a clear, rational basis for selection in production and workshop environments. Durable construction that reduces setup variation Built with a massive holding arm and a blackened finish, the clamp delivers mechanical stiffness and basic corrosion protection without adding unnecessary weight. The robust arm minimises elastic deformation under load, preserving alignment and repeatability across repeated cycles. With a 90° clamping angle and a 229 mm reach, the component clearance is increased while the fixture footprint remains compact. The unit’s overall mass of 1.6 kg contributes to solidity during operation while keeping the clamp easy to integrate into existing assemblies. Simple integration into jigs and fixtures The vertical base mounting option facilitates direct attachment to plates or tooling blocks, allowing the clamp to be positioned precisely in the fixture layout. The horizontal lever action provides a clear clamping direction, making it suitable for applications where transverse clearance and unobstructed access are required. The compact design and standardised dimensions support modular tooling concepts and make the clamp a practical choice for both single-station workholding and small-series production. Suited to workshop and light industrial use with clear value As a straightforward, mechanically driven workholding element, the clamp offers an efficient balance of strength and simplicity that fits maintenance workshops, toolrooms and production fixtures. The durable finish and compact mass mean fewer replacements and less servicing, contributing to predictable operating costs and uptime. For additional technical information or if application-specific data are required, Metav Werkzeuge provides consultancy and can supply detailed drawings or order information to support integration into existing systems. Choose the Kukamet Horizontal clamp 112 for robust, repeatable clamping in fixtures and contact Metav Werkzeuge for supply and technical guidance Technical data SKU: B112-5-D-C3 GTIN: 8680731507355 Model designation: Horizontal clamp 112 Manufacturer: Kukamet Core specifications Arm length: 229 mm Clamping angle: 90° Maximum pressing force: 4,500 N Maximum holding force: 5,000 N Weight: 1.6 kg ECLASS: 21041719 ETIM: EC011973 Materials & features Finish: blackened Mounting: vertical base Design detail: massive holding arm Type: horizontal lever clamp Category: clamps FAQ What is the maximum holding force of this clamp? The Kukamet Horizontal clamp 112 provides a maximum holding force of 5,000 N (holding force) and a pressing force rated at 4,500 N. Can the clamp be mounted directly to a tooling plate? Yes, the clamp uses a vertical-base mounting which allows direct attachment to plates or tooling blocks for secure fixture integration. What is the reach of the clamp arm? The arm length is 229 mm, offering extended clearance for workpieces and flexible positioning in jigs and fixtures. Is the clamp suitable for repeated production cycles? The robust construction, massive holding arm and measured force ratings make the clamp appropriate for repeated use in workshop and light industrial production settings; the blackened finish gives basic corrosion protection. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 2300 N Horizontal Clamp With Safety Lock, Blackened Finish - Kukamet
Compact, secure clamping with measurable performance: the combination of a compact 90° angle base, a safety lock and a holding force of 2,500 N ensures reliable fixture retention and consistent process throughput. Order the Horizontal clamp 113 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 113 — 90° angle base, safety lock (Kukamet) The Horizontal clamp 113 is a robust lever-style horizontal clamp designed for secure, repeatable clamping where space is limited and operator safety is required With safety lock for secure clamping 90° angle base for flush mounting Holding force up to 2,500 N Consistent clamping force for repeatable fixtures The clamp delivers a maximum holding force of 2,500 N and a maximum clamping force of 2,300 N, values that support reliably fixed workpieces in production and assembly jigs. These figures translate directly into less repositioning and lower rework rates, since the applied forces are quantifiable and consistent. The pressure spindle is specified as M8×50, which enables fine adjustment of the clamping contact and simplifies integration with existing fixture plates. Space-saving mounting that keeps tooling accessible A compact footprint and the integrated 90° angle base enable fixing the unit close to edges or within tight fixture layouts. The angled mounting reduces obstruction in dense setups and supports ergonomic access for operators during quick-change tasks. With a mass of just 0.42 kg, the clamp adds minimal load to movable fixtures and is well suited to modular tooling where weight matters for handling and position accuracy. Built for safety and uninterrupted operation Equipped with a safety lock, the clamp secures the lever in its closed position to prevent accidental release during machining or handling. The lever-style mechanism provides rapid actuation while the locking feature meets typical workshop safety expectations for manual clamps. The external finish is a blackened finish, which offers corrosion protection and helps maintain a professional workshop appearance over long service intervals. Simple integration and clear identification The clamp’s compact design and standard spindle size make it straightforward to incorporate into existing jigs and fixtures. Mechanical characteristics are transparent and measurable, supporting quality assurance processes and fixture documentation. The model is supplied under the Kukamet range and is identified by SKU B113-3-L, enabling clear inventory tracking and reorder management. For project-specific advice on the Kukamet Horizontal clamp 113, or to arrange supply and technical information from Metav Werkzeuge, contact our consultants at Metav Werkzeuge in Emmerich Technical Data SKU: B113-3-L GTIN: 8680731507485 ECLASS: 21041719 ETIM: EC011973 Core specifications Weight: 0.42 kg Maximum holding force: 2,500 N Maximum clamping force: 2,300 N Pressure spindle: M8×50 Clamping angle: 90° Materials & features Finish: blackened finish Mounting type: angle base Safety lock: yes Device type: horizontal lever clamp FAQ What holding and clamping forces does this clamp provide? The Kukamet horizontal clamp 113 offers a maximum holding force of 2,500 N and a maximum clamping force of 2,300 N, values suited for secure fixture retention. How is the clamp mounted in a fixture? Mounting is via an integrated 90° angle base, designed for flush or edge mounting in modular jigs and fixture plates. Which spindle size is fitted to adjust contact pressure? The clamp uses an M8×50 pressure spindle, allowing fine adjustment of the clamping contact. Is there a safety mechanism to prevent accidental release? Yes — the unit is supplied with a safety lock to secure the lever in the closed position. How heavy is the clamp and what impact does that have on fixtures? The clamp weighs 0.42 kg, which keeps additional load minimal for movable or lightweight fixture assemblies. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 2300 N Horizontal Clamp With Vertical Foot, Massive Holding Arm, Galvanised - Kukamet
Take advantage of a compact lever clamp that combines a massive holding arm, galvanised corrosion protection and reliable forces up to 2,500 N for secure fixturing; order directly via Metav Werkzeuge or contact our consultants for specification advice. Horizontal clamp 112 by Kukamet — massive holding arm, 90° lever clamp The Horizontal clamp 112 is a compact lever clamp designed for secure fixturing at a fixed 90° angle, suitable for jigs, fixtures and general workshop applications Massive holding arm for stable clamping Galvanised construction for corrosion resistance 90° lever clamp with vertical foot mounting Holding force up to 2,500 N Consistent, measurable clamping performance for production use The lever design delivers a repeatable clamping action that supports reliable process control in assembly and machining tasks. With a holding force of 2,500 N and a clamping force of 2,300 N, this clamp provides clear, comparable performance figures for fixture planning. The quantifiable forces reduce uncertainty during setup and allow accurate load calculations, helping to maintain stable part position throughout handling and machining. Robust construction that minimises downtime Constructed in galvanised steel and fitted with a massive arm, the clamp offers mechanical durability and enhanced resistance to workshop environments. The low component weight of 0.292 kg combines the benefits of a solid clamping element with minimal added mass in fixtures, easing handling during assembly while providing the stiffness required for repetitive clamping cycles. Corrosion protection helps extend service intervals and supports long-term availability of fixturing assets. Space-saving mounting and precise geometry for fixtures A compact 68 mm arm and vertical foot mounting enable flexible installation on fixture plates and small jigs where space is limited. The fixed 90° orientation keeps locating geometry straightforward and avoids angular deviations during clamping operations, simplifying repeatability checks and reducing cycle-time adjustments. Thanks to the vertical foot, the clamp integrates cleanly into modular clamping systems and indexed tooling setups. Safe handling and straightforward integration into workflows The lever mechanism provides fast engagement and a clearly defined end position for secure holding without complex adjustment. As a horizontal lever clamp from Kukamet it is suitable for a wide range of light- to medium-duty applications where a reliable, manual clamping action is required. Measurable forces and compact dimensions make it straightforward to specify in CAD layouts and to include in work instructions for operators, supporting consistent quality on the shop floor. For workshop-ready clamping with Kukamet's robust lever design, contact Metav Werkzeuge for availability and local delivery: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 112-3-D-C1 GTIN: 8680731500493 Model: 112 Manufacturer: Kukamet eClass: 21041719 ETIM: EC011973 Core measurements Arm length: 68 mm Weight: 0.292 kg Angle: 90° Clamping force (max): 2,300 N Holding force (max): 2,500 N Materials & features Galvanised Massive holding arm Vertical foot mounting 90° lever clamp Category: Clamps FAQ What holding and clamping forces does the clamp provide? The horizontal clamp 112 offers a holding force of 2,500 N and a clamping force of 2,300 N as specified for fixture calculations. How is the clamp mounted to a fixture plate? Mounting is via a vertical foot; the clamp is designed for vertical-foot installation on jig and fixture plates. Is the construction suitable for workshop environments prone to moisture? The galvanised finish provides corrosion resistance, making the clamp suitable for typical workshop conditions and reducing maintenance frequency. What are the key dimensions to consider for layout? Relevant figures are the arm length of 68 mm, a fixed 90° orientation and a unit weight of 0.292 kg, which help with CAD integration and balance calculations. Which SKU identifies this clamp for ordering or spare parts? This lever clamp is listed as SKU 112-3-D-C1 and marketed as the Horizontal clamp 112 by Kukamet Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 2500N Pneumatic Clamp Without Cylinder, Horizontal Base, Zinc-Plated - Kukamet
Take advantage of the combination of high holding force, a zinc-plated, compact design, and a stable horizontal-foot mounting for dependable clamping in fixtures; order the device directly via Metav Werkzeuge or request advice from our consultants. Pneumatic clamp 681 – Kukamet horizontal-foot clamp, zinc-plated, no cylinder A Pneumatic clamp 681 designed for secure right-angle clamping in fixtures and jigs, offering high holding capacity with a compact, corrosion-resistant construction. Horizontal foot for stable mounting High holding force: 9,000 N Zinc-plated corrosion protection Reliable clamping for heavy-duty fixtures The 9,000 N holding force combined with a 2,500 N actuation capability makes this clamp suitable for securing substantial workpieces during machining and assembly operations. The zinc-plated finish contributes to long-term resistance against routine workshop wear and humidity, while the unit's compact mass of 2.8 kg keeps fixture loads low. These characteristics translate into fewer workpiece shifts, reduced rework and more consistent process outcomes, which supports higher productivity and predictable cycle times. Flexible integration with existing pneumatic systems Designed with a horizontal foot and a 90° clamp angle, the clamp fits into common jig and fixture layouts for right-angle holding. Supplied without a pneumatic cylinder, the design gives system integrators the flexibility to match cylinder type and size to specific plant air systems and control strategies, simplifying maintenance planning and spare-part management. The omission of an integrated cylinder reduces initial complexity while enabling tailored pneumatic configurations to optimise actuation speed and endurance. Durable construction for continuous workshop use Built on the lever-clamp tradition, this unit delivers practical robustness for recurring production demands. The zinc-plated surface and proven mechanical layout ensure resistance to corrosion and mechanical fatigue, helping to extend service intervals and lower downtime. The horizontal mounting pad eases alignment during installation and supports consistent clamping behaviour over many cycles. Overall, the design promotes steady performance in fixtures, jigs and custom assemblies where repeatable clamping is essential. Discuss integration and ordering options for the Kukamet Pneumatic clamp 681 with Metav Werkzeuge in Emmerich — contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and rapid supply. Technical data SKU: 681-4-M GTIN: 8680731505054 Manufacturer: Kukamet Facts Weight: 2.8 kg Holding force: 9,000 N Clamping force (max): 2,500 N Clamp angle: 90° Special features Material: Zinc-plated Mounting: Horizontal foot No pneumatic cylinder included Category: Clamp FAQ What is the maximum holding force of this clamp? The Kukamet Pneumatic clamp 681 offers a maximum holding force of 9,000 N, providing secure retention for heavy or force-prone workpieces. Does the clamp include a pneumatic cylinder? No; the unit is delivered without a pneumatic cylinder, allowing the cylinder selection to be matched to the specific pneumatic system and actuation requirements. How is the clamp mounted to a fixture? Mounting is via a horizontal foot, designed for stable attachment to fixture bases and jigs at a 90° clamp angle. What material and surface finish does the clamp have? The clamp is zinc-plated, giving corrosion resistance suitable for typical workshop environments. Can this clamp be used for right-angle holding in jigs? Yes. The 90° clamp angle and horizontal-foot mounting make the device suitable for right-angle clamping tasks in jigs and fixtures; refer to the SKU 681-4-M for ordering. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 3.5 kN Horizontal Clamp, Zinc Plated, M10x70 Spindle, 3650 N Holding Force - Kukamet
Take advantage of robust holding performance and corrosion protection combined with a compact, easy-to-mount design for dependable fixture clamping; order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Horizontal toggle clamp 113 by Kukamet — zinc‑plated, 90° lever clamp The Horizontal toggle clamp 113 is a compact zinc‑plated lever clamp designed for secure horizontal workpiece holding in fixtures, jigs and assembly stations where repeatable positioning and corrosion resistance are required. Zinc-plated steel finish 90° clamping angle for fixtures 3,500 N clamping force Angled foot mounting for easy fixing Corrosion protection that keeps production running The zinc‑plated finish provides reliable corrosion resistance, extending service intervals and reducing unexpected downtime in humid or workshop environments. A protective coating prevents early surface degradation, maintaining consistent contact geometry and thus preserving clamping accuracy over time. For users seeking long‑term reliability, the coated surface reduces the need for frequent replacement or refurbishment, supporting continuous production and predictable fixture behaviour. Strong, repeatable clamping for stable setups With a rated 3,500 N clamping force and a maximum holding force of 3,650 N, this lever clamp supplies the consistent pressure required for repeatable operations. The adjustable M10x70 spindle allows fine tuning of contact height and compression, enabling exact workpiece positioning without resorting to makeshift shims. Clear separation of clamping and holding values means fixtures can be designed with predictable safety margins, improving process stability and reducing rework in assembly or inspection tasks. Simple integration to fixtures and jigs The angled foot mounting simplifies attachment to plates or frames and supports a secure 90° operating position for horizontal action. Weighing 0.94 kg, the unit adds minimal mass to moving assemblies while offering a compact footprint that fits tight fixture layouts. The combination of compact dimensions and standardised spindle thread enables straightforward replacement or retrofit into existing tooling without extensive redesign, helping to shorten installation time and maintain production flow. Practical use and low‑effort maintenance Designed as a practical lever clamp for light to medium‑duty applications, the model is suitable for routine assembly, welding jigs and general workshop fixturing where frequent manual clamping is required. Routine upkeep is limited to keeping pivot points clean and applying light lubrication to the toggle joint; the standard spindle allows simple replacement if wear occurs. The robust construction ensures dependable operation with minimal servicing, supporting an efficient workflow and predictable fixture availability. Request a tailored technical consultation or delivery schedule from Metav Werkzeuge for the Kukamet horizontal toggle clamp 113 — contact info@metav-werkzeuge.com or call +49 2822 7131930 for details and assistance Technical data Article number: 113-4 GTIN: 8680731500912 Manufacturer: Kukamet eClass: 21041719 ETIM: EC011973 Numbers / Core technical data Max clamping force: 3,500 N Max holding force: 3,650 N Weight: 0.94 kg Angle: 90° Spindle: M10x70 Design / Special features Material: zinc‑plated Mounting: angled foot mounting (Winkelfuß) Category: Spanner Arm: not applicable Story trigger: lever clamp FAQ What clamping force can be expected from this lever clamp? The clamp delivers a rated clamping force of 3,500 N and a maximum holding force of 3,650 N for stable fixturing. Can the clamp be adjusted for different workpiece heights? Yes, the M10x70 spindle allows height adjustment to accommodate varying workpiece thicknesses and achieve repeatable contact pressure. Is the finish suitable for workshop environments? The zinc‑plated finish provides corrosion resistance appropriate for typical workshop and assembly conditions, helping to prolong service life. How is the clamp mounted to a fixture base? Mounting is via the angled foot, designed for straightforward attachment to plates or frames in a 90° horizontal orientation. Is this clamp suitable for retrofitting existing jigs? The compact design and standard spindle thread make the clamp suitable for retrofit into many existing fixture layouts without major modifications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 3000 N Pneumatic Clamp Vertical Handle, Zinc Plated, 3300 N Hold Force - Kukamet
Take advantage of reliable clamping performance and a compact, corrosion-resistant design to keep fixtures productive and maintenance straightforward; order the Kukamet clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Kukamet 651 Pneumatic Clamp – Vertical-Foot, 90° Actuation The 651 pneumatic clamp is a vertical-foot clamping solution for industrial jigs and fixtures, providing a 90° actuation and a vertical handle for ergonomic and automated operation Vertical-foot mount with vertical handle Holding force up to 3,300 N Actuating force 3,000 N for secure clamping Galvanised steel body, durable industrial finish Predictable clamping force for repeatable production results The pneumatic clamp delivers a clearly defined balance between holding and actuation, with a holding force of up to 3,300 N and a maximum actuating force of 3,000 N. This numeric performance creates a predictable clamping outcome in serial production and reduces variability at the workpiece. Because force values are specified in newtons, engineers can calculate fixture safety margins and cycle loads precisely, enabling shorter setup validation and fewer scrapped parts. The controlled pneumatic actuation also minimises shock loads and protects delicate components during securing. Saves space and simplifies fixture layout Designed with a vertical-foot mount and a vertical handle, this clamp occupies a small footprint while keeping the actuator clear of adjacent tooling. The vertical arrangement suits congested fixtures and allows integration into multi-clamp arrays without obstructing part transfer paths. The 90° actuation angle provides a compact movement arc, which reduces the need for additional clearance and simplifies CAD layout for new jigs. Overall, the compact geometry supports denser clamp placement and faster changeovers in lean production cells. Built for industrial environments and low maintenance The housing is finished in galvanised steel to resist corrosion in workshop and shop-floor environments, ensuring long service intervals and predictable wear characteristics. At a mass of 2.1 kg the unit combines a robust construction with manageable weight for handling during assembly and retrofitting. The galvanised surface reduces the need for frequent recoating or special storage, which in turn lowers lifecycle maintenance costs and keeps mean time between failure (MTBF) high in everyday use. Straightforward integration into production systems This pneumatic clamp is suitable for a wide range of assembly, welding and testing fixtures where stable, repeatable clamping is required. The clamp’s actuation profile and measured forces make it straightforward to specify within pneumatic control circuits and to match with existing valves and pressure settings. For applications that require quick part access, the vertical handle assists manual intervention; in automated cells the actuator can be coupled to existing pneumatic lines for synchronized operation. The design emphasises dependable function in industrial fixtures while keeping installation and commissioning effort to a minimum. For advice on integrating the Kukamet 651 into specific fixtures or for procurement via Metav Werkzeuge, contact Metav Werkzeuge by phone or e‑mail to discuss technical details and delivery options Technical Data SKU: 651-4-H GTIN: 8682843521663 Manufacturer: Kukamet Weight: 2.1 kg Maximum actuating force: 3,000 N Maximum holding force: 3,300 N Actuation angle: 90° Material: Galvanised steel Mounting: Vertical-foot mount Special feature: Vertical handle FAQ What clamping forces can be expected from this pneumatic clamp? The Kukamet 651 pneumatic clamp provides a maximum holding force of 3,300 N and an actuating force of 3,000 N, values that support predictable clamping in production fixtures. Is the clamp suitable for welding fixtures? Yes, the galvanised steel construction and robust actuation make the 651 suitable for many welding and assembly fixtures where repeatable clamping is required. How is the clamp mounted to a fixture plate? The clamp uses a vertical-foot mounting arrangement designed to be bolted to fixture plates, allowing a compact installation and easy integration into existing jig geometry. Can the vertical handle be used for manual operation? The vertical handle is intended to assist manual positioning and access; where full automation is needed, pneumatic actuation provides repeatable, valve-controlled operation. Which SKU and GTIN identify this clamp? The product is listed as SKU 651-4-H with GTIN 8682843521663 for procurement and logistics purposes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 3000 N Pneumatic Clamp With Vertical Base, Massive Holding Arm, Zinc-Plated - Kukamet
Take advantage of the combination of sturdy construction, repeatable pneumatic actuation and a long 200 mm holding arm for secure, efficient fixturing. Order the Pneumatic Toggle Clamp 651 directly via Metav Werkzeuge or consult our specialists for integration advice. Pneumatic Toggle Clamp 651 — Galvanised toggle clamp with 200 mm arm (Kukamet) The Pneumatic Toggle Clamp 651 is a vertical-foot clamping unit designed for fixtures and jigs in production environments, combining a long reach with robust, repeatable pneumatic actuation for secure workholding. Galvanised construction for corrosion resistance 200 mm massive holding arm Vertical-foot mounting for stable setup 3,300 N maximum holding force Dependable force where repeatability matters The unit delivers a clearly defined combination of pneumatic actuation and mechanical toggle locking, providing a maximum actuation force of 3,000 N and a holding force of 3,300 N. This separation between actuation input and static clamping capacity means the clamp secures components reliably without constant actuator load. For production runs and repeatable assembly tasks, the pneumatic drive offers consistent cycle-to-cycle behaviour, while the toggle mechanism maintains clamp position under sustained loads — a practical solution for automated or semi-automated workstations that demand predictable clamping performance. Built for workshop environments and low maintenance Constructed from galvanised steel and fitted with a massive holding arm, the clamp resists everyday workshop wear and moderate corrosion, reducing the need for frequent replacement. The robust arm geometry distributes load across the toggle, improving component life and reducing maintenance intervals. Where surface protection is a priority, the galvanised finish provides a durable barrier; routine inspection of seals and supply-line filtration keeps the pneumatic components performing reliably over long production cycles. Easy integration into fixtures and jigs With a 200 mm arm length and a vertical-foot mounting arrangement, the clamp fits a wide range of fixture layouts and allows secure attachment to flat bases or tooling plates. The 90° actuation angle gives a compact movement path suitable for tight assemblies while still delivering an extended reach during clamping. Installation requires straightforward mechanical mounting and standard pneumatic supply components; the design supports quick retrofitting into existing tooling or purpose-built pallets, improving workstation throughput without complex modifications. Contact Metav Werkzeuge for technical advice on integrating the Kukamet pneumatic toggle clamp into production fixtures or to arrange supply from Emmerich. Technical data Article number: 651-4-D-C3 Manufacturer: Kukamet Eclass: 21021004 ETIM: EC011973 Facts Arm length: 200 mm Max actuation force: 3,000 N Max holding force: 3,300 N Angle: 90° Special features Material: galvanised Vertical-foot mounting Massive holding arm Category: toggle clamp / spanner SKU: 651-4-D-C3 FAQ What clamping and actuation forces does this clamp provide? The Pneumatic Toggle Clamp 651 provides a pneumatic actuation force of up to 3,000 N and a maximum holding force of 3,300 N, delivering reliable static clamping for fixture and jig operations. Is the clamp suitable for use in damp or mild-corrosive workshop conditions? The clamp features a galvanised finish which offers good resistance to corrosion in typical workshop environments; however, for highly corrosive or marine atmospheres, additional protection or alternative materials should be considered. How is the clamp mounted to a fixture plate? Mounting is via a vertical-foot arrangement that secures the base plate to a tooling surface, providing a stable connection for demanding clamping cycles and simple alignment within existing fixtures. Can the clamp be used in automated or repeat-cycle systems? Yes. The pneumatic actuation and toggle locking are suitable for automated or semi-automated production lines, offering consistent cycle performance when paired with appropriate control valves and air preparation. What is the reach and movement characteristic of the clamping arm? The clamp has a 200 mm holding arm and a 90° actuation angle, providing extended reach with a compact movement path that suits confined assembly spaces. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 3500 N Horizontal Clamp With Safety Lock, Galvanised - Kukamet
Take advantage of the galvanised construction, integrated safety lock and a compact 90° angle base for consistently secure clamping. The robust M10x70 pressure spindle and up to 3,500 N clamping force ensure repeatable workholding and reduced setup time. Order via Metav Werkzeuge or consult the team for application advice. 113 Horizontal clamp »113« – Galvanised horizontal clamp, 3,500 N clamping force (Kukamet) The 113 Horizontal clamp is a compact horizontal clamp for secure 90° workholding in fixtures and jigs, designed for reliable production and frequent use Galvanised steel body for corrosion resistance 3,500 N clamping force for firm workholding Integrated safety lock prevents accidental release Angle base for 90° mounting flexibility Secure clamping that keeps production running The clamp delivers a defined clamping force of 3,500 N and a holding force of 3,650 N, providing stable fixation for machining, assembly and inspection tasks. The M10x70 pressure spindle converts lever motion into consistent contact pressure, which reduces rework and minimises position drift during secondary operations. For workshops that value throughput and repeatability, this lever-style workholding device supports shorter cycle times and predictable process results. Durable construction with safety integrated A galvanised finish protects the mechanism against corrosion in workshop environments, extending service life and lowering maintenance frequency. The unit includes an integrated safety lock that secures the lever in the clamped position and prevents unintentional release during handling or vibration-prone processes. The angle base at 90° enables straightforward mounting on fixtures or machine tables, offering a compact footprint without compromising robustness. These design choices support safer workplaces and reduce unscheduled stoppages. Fast setup and versatile fixture integration The horizontal layout and lever actuation permit rapid clamping and unclamping, cutting setup times on repetitive jobs. The compact form and standard thread allow easy integration into bespoke jigs or multi‑station fixtures, while the galvanised surface maintains appearance and function under regular use. The mechanism is particularly suitable where frequent part changes demand quick, secure workholding and where a reliable mechanical lock is required for peace of mind. For procurement or technical advice on the Kukamet horizontal clamp, contact Metav Werkzeuge for tailored guidance and secure delivery from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: 113-4-L GTIN: 8680731500981 eClass: 21041719 ETIM: EC011973 Core Data Clamping force: 3,500 N Holding force: 3,650 N Weight: 0.94 kg Angle: 90° Materials & Features Material: galvanised steel Mounting: angle base Pressure spindle: M10x70 Safety lock: integrated Category: clamp / workholding FAQ What clamping and holding forces does this clamp provide? The 113 horizontal clamp provides a clamping force of 3,500 N and a holding force of 3,650 N for secure fixation during machining and assembly. Can the clamp be mounted at right angles to the work surface? Yes, the clamp features an angle base for 90° mounting, making it suitable for fixtures and machine tables requiring perpendicular workholding. Is the finish suitable for workshop environments? The galvanised construction offers corrosion resistance and helps extend service life under normal workshop conditions. Does the clamp include a safety mechanism to prevent accidental release? Yes, an integrated safety lock secures the lever in the clamped position to prevent unintended opening during vibration or handling. Which spindle size is used to apply pressure? The clamp uses an M10x70 pressure spindle to transfer lever motion into consistent contact pressure. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 3500 N Horizontal Clamp With Safety Lock, M10x70 Spindle - Kukamet
Take advantage of a compact, reliable clamping solution that combines a high clamping force, a secure safety lock and space-saving vertical-foot mounting for consistent cycle times and safe workholding; order directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal clamp 112 — horizontal lever clamp with safety lock and vertical foot (Kukamet) The Horizontal clamp 112 is a robust horizontal clamping lever designed for fixture and jig applications where repeatable, secure clamping and compact mounting are required Safety lock for secure clamping Max clamping force 3,500 N Vertical foot for space-saving mounting Black-oxide finish for surface protection Dependable clamping performance that speeds setup The clamping mechanism delivers a clearly specified maximum clamping force of 3,500 N and a holding force of 3,650 N, providing a reliable margin between applied clamp pressure and static retention. The difference between the two values represents the device’s ability to maintain position under load after the lever is engaged, which reduces rework and the need for frequent re-adjustment. The integrated M10 x 70 mm pressure spindle allows simple fine adjustment of contact pressure, enabling repeatable setups on jigs and fixtures. This results in faster changeovers and fewer production interruptions. Secure locking and compact mounting for safer workflows A mechanical safety lock prevents accidental release of the clamping arm during machining or handling, reducing the risk of part movement and operator injury. The clamp’s vertical foot mounting keeps the body close to the work surface, making it suitable where horizontal space is limited or where multiple clamps are arranged in a grid. The unit’s small mass (0.81 kg) and 90° lever orientation allow compact fixture layouts without compromising accessibility to the clamped workpiece. The safety mechanism and compact footprint together improve both shop-floor ergonomics and process security. Durable finish and low-maintenance operation for long service life The component is supplied with a black-oxide finish, giving a protective surface layer that helps resist corrosion and reduces light reflection in precision setups. Key wear points are straightforward to inspect and maintain; periodic lubrication of the spindle and lever pivot keeps the mechanism operating smoothly without complex service routines. As a product from Kukamet, the clamp is suited to everyday industrial use in assembly and machining jigs where a combination of durability, clear specification and simple adjustment is required. Choose the Kukamet Horizontal clamp 112 for secure, compact clamping — contact Metav Werkzeuge for ordering and tailored technical advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: B112-4-L GTIN: 8680731507317 Name: Horizontal clamp 112 Manufacturer: Kukamet Facts Max clamping force: 3,500 N Max holding force: 3,650 N Spindle: M10 x 70 mm Angle: 90° Weight: 0.81 kg Special features Safety lock Vertical foot mounting Black-oxide finish Horizontal lever clamp Category: Clamping device FAQ What maximum clamping force does this clamp provide? The Horizontal clamp 112 delivers a maximum clamping force of 3,500 N and a holding force of 3,650 N to ensure secure retention during machining. How is the clamp mounted to a fixture? Mounting is by a vertical foot arrangement that keeps the clamp body close to the work surface and allows compact placement within jigs and tool fixtures. Does the clamp include a mechanism to prevent accidental release? Yes — the clamp features an integrated safety lock that secures the lever in the clamped position until deliberately released. What adjustment options are available for contact pressure? Contact pressure is adjusted via the M10 x 70 mm pressure spindle, permitting fine tuning of clamping force for repeatable setups. Is the surface treated for corrosion resistance? The clamp is supplied with a black-oxide finish, providing surface protection and reduced reflectivity for precision environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 3500N Horizontal Clamp With Safety Lock, Zinc Plated - Kukamet
Take advantage of the combination of robust clamping force, a secure safety lock, and a compact, galvanised design for dependable fixture work in production and assembly. Order the 112-4-L horizontal clamp directly via Metav Werkzeuge or ask our consultants if needed. 112-4-L horizontal clamp by Kukamet — galvanised, safety lock The 112-4-L horizontal clamp is a compact horizontal clamping solution designed for jigs, fixtures and general workshop fixturing where repeatable, locked clamping at 90° is required. Safety lock for secure clamping Galvanised finish for corrosion resistance 3,500 N maximum clamping force Vertical foot for stable mounting Consistent clamping performance for repetitive work A compact design delivers a high clamping force within a small footprint, enabling reliable repeatable operations in assembly and machining jigs. The unit’s rated maximum clamping force of 3,500 N and holding force of 3,650 N mean reduced slippage and stable workpiece retention under load. For non-specialist readers: the clamping force is the pushing force applied by the clamp to hold the workpiece, while the holding force describes the resistance to unintended release. These measurable values support planning for process stability and help assess whether the clamp meets specific fixture requirements. Secure locking and safe handling reduce downtime Equipped with a safety lock, the clamp prevents accidental opening during processing or handling, increasing operator safety and avoiding workpiece damage. The interlock feature is particularly valuable in automated or semi-automated setups where movement or vibration might otherwise lead to unintended release. The safety mechanism therefore reduces stoppages for re-clamping and supports a smoother production flow, contributing to higher overall equipment effectiveness. Durable finish and simple mounting for workshop longevity A galvanised finish protects the clamp from corrosion in humid shop environments, extending service life and reducing the need for frequent replacement. The vertical foot mounting style allows secure attachment to fixture plates and benches, while the M10x70 spindle thread provides a standardised connection for many fixture designs. At just 0.81 kg, the clamp combines portability with robustness, making it easy to reposition across different jigs without compromising stability. Clear integration into existing fixturing With a 90° operating angle and a concise design, the clamp integrates cleanly into slide-and-lock fixture concepts and modular tooling frames. The compact actuator path minimises interference with adjacent components, and the standard thread and mounting arrangement facilitate retrofitting into established setups. Where process documentation is required, the numeric specifications support engineering decisions and risk assessments. For supply, availability and expert assembly advice on the Kukamet 112-4-L horizontal clamp, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific fixturing tasks and rapid delivery options Technical Data SKU: 112-4-L GTIN: 8680731500639 Brand: Kukamet Category: Spanner Material: galvanised Facts Maximum clamping force: 3,500 N Maximum holding force: 3,650 N Angle: 90° Thread: M10x70 Weight: 0.81 kg Special features Safety lock included Vertical foot mounting Compact horizontal clamp design Corrosion-resistant galvanised finish FAQ What is the maximum clamping force of this clamp? The Kukamet 112-4-L horizontal clamp provides a maximum clamping force of 3,500 N, making it suitable for medium-duty fixturing and assembly tasks. Is the clamp protected against corrosion? Yes, the clamp has a galvanised finish, which offers corrosion resistance for use in workshop and light industrial environments. Can the clamp be mounted on standard fixture plates? The clamp uses a vertical foot mounting arrangement and an M10x70 spindle thread, enabling straightforward mounting on many standard fixture plates and modular frames. Does the product include a safety mechanism? The 112-4-L includes a safety lock to prevent accidental opening, improving operator safety and process reliability. What is the weight and portability of the clamp? Weighing 0.81 kg, the clamp is compact and easy to reposition between jigs while remaining robust enough for routine production use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 4 000 N Pneumatic Three-Point Clamp With Pneumatic Cylinder, Zinc-Plated - Kukamet
Take advantage of the combination of rapid pneumatic actuation, high holding capacity and corrosion-resistant construction for reliable, repeatable clamping in production fixtures — order directly via Metav Werkzeuge or consult our specialists for integration advice. Pneumatic clamp 682 — Horizontal-foot pneumatic clamp with 18,000 N holding force by Kukamet The 682 pneumatic clamp is a compact pneumatic clamping device designed for fixture and jig applications where fast, repeatable securing at a 90° angle is required. Pneumatic actuation with integrated cylinder Horizontal mounting foot for stable installation Holding force up to 18,000 N Galvanised construction for corrosion resistance Fast, repeatable clamping for efficient production The combination of an integrated pneumatic cylinder and engineered mechanics delivers consistent cycle times and repeatable positioning, reducing set-up variance on production lines. With a holding force of 18,000 N and a clamping or pressing capacity of 4,000 N, this clamp is suited to medium- and heavy-duty jigs where secure retention and rapid operation shorten takt times. The measured forces translate directly into process reliability, enabling predictable machining and assembly sequences while supporting higher throughput. Straightforward mounting and compact installation footprint Designed with a horizontal foot, the clamp installs cleanly onto fixture plates and tooling blocks, keeping the clamping axis parallel to the workplane for compact layouts. The 90° operating angle allows simple integration into right-angle stations and multi-clamp fixtures. At approximately 9.944 kg, the unit balances robustness and manageable mass for automated or manual tooling systems. Conceived for easy alignment, the device helps reduce set-up time and facilitates repeatable positioning across batch runs. Robust finish for long service life in workshop environments Constructed from galvanised steel, the clamp resists corrosion and maintains surface integrity under typical workshop conditions. The protective finish lowers the risk of rust-related seizure and extends maintenance intervals, contributing to lower lifecycle costs and fewer unscheduled stops. Components that rely on pneumatic actuation are designed for straightforward maintenance access, enabling rapid servicing of seals and connections without complex disassembly. Versatile use across fixtures, jigs and assembly stations This pneumatic clamping device suits a wide range of industrial tasks, from production fixtures and test jigs to welding and assembly stations where secure holding and rapid release are essential. The compact mechanism fits dense tooling arrangements and is compatible with standard pneumatic controls. By providing reliable retention and fast actuation, the clamp supports processes that demand consistent part orientation and minimal manual handling, improving both efficiency and workplace ergonomics. Choose the Kukamet 682 pneumatic clamp for dependable, repeatable clamping — contact Metav Werkzeuge in Emmerich for specification support and ordering at info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical data Article number: 682-6 GTIN: 8680731505146 SKU: 682-6 Manufacturer: Kukamet Facts Holding force: 18,000 N Clamping force (max): 4,000 N Angle: 90° Weight: 9.944 kg Special features Material: galvanised Mounting: horizontal foot Feature: with pneumatic cylinder Category: clamp FAQ What holding and clamping forces does this device provide? The Kukamet pneumatic clamp 682 offers a holding force of 18,000 N and a maximum clamping (pressing) force of 4,000 N, suitable for robust fixture applications. How is the clamp mounted to a fixture plate? Mounting is by a horizontal foot designed for secure attachment to tooling plates and blocks; the clamp’s 90° operating angle aids compact fixture design. Is the pneumatic cylinder included and ready for connection? Yes, the unit is specified as supplied with an integrated pneumatic cylinder for direct connection to standard compressed-air controls. What environmental resistance does the clamp offer? The clamp is manufactured in a galvanised finish, providing corrosion resistance appropriate for workshop and production environments. Can the clamp be integrated into automated systems? The compact footprint and pneumatic actuation of the 682 allow straightforward integration into automated jigs and assembly stations, supporting consistent cycle times. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 4,000 N Pneumatic Clamp Horizontal Base Without Pneumatic Cylinder, Zinc Plated - Kukamet
Robust galvanised lever clamp with a compact horizontal‑foot base and a 90° lever angle combined with a holding force of 18,000 N and clamping force of 4,000 N ensures dependable fixation in jigs and fixtures. Order the Kukamet 682 directly via Metav Werkzeuge or ask our consultants for application and integration advice. 682 Pneumatic Clamp (lever clamp) by Kukamet — galvanised, horizontal‑foot, 90° angle The 682 is a galvanised pneumatic lever clamp designed for fixed‑angle holding in production jigs and fixture systems, ideal where compact, robust clamping is required. Galvanised construction for corrosion resistance Horizontal‑foot mounting for jig integration Holding force up to 18,000 N Clamping force up to 4,000 N Stable fixation for demanding fixtures The lever clamp is engineered to provide reliable holding in demanding production environments. Its galvanised finish protects the mechanism against corrosion, extending service life in workshops and assembly lines. The compact horizontal‑foot base allows direct fixture mounting, reducing installation complexity while keeping the clamp stable under load. At a mass of 4.9 kg the unit balances rigidity and manageable handling for repair or repositioning, helping to maintain consistent part positioning during repetitive operations. High forces for secure machining and assembly With a clamping force of 4,000 N and a holding force of 18,000 N, this lever clamp secures large or heavy components where slip resistance is critical for process repeatability. The 90° lever orientation converts actuator input into a compact locking motion, minimising interference with surrounding tooling. These force values translate into improved repeatability and reduced rework in metalworking and assembly tasks, supporting efficient cycle times and predictable results on production lines. Designed for integration and low‑maintenance use Supplied without a pneumatic cylinder, the clamp is intended for integration into systems where the actuator is chosen separately to match control architecture. The horizontal‑foot mounting eases retrofitting into existing jigs and fixtures, while the simple lever mechanism reduces maintenance needs and downtime. The product’s straightforward design simplifies inspection and replacement of wear parts, supporting uninterrupted production and a practical service strategy for maintenance teams. Contact Metav Werkzeuge today to discuss how the Kukamet 682 lever clamp fits into existing fixtures or to request tailored integration guidance from our specialists. Technical Data Article number: 682-6-M GTIN: 8680731505092 Brand: Kukamet Material: Galvanised Mounting: Horizontal foot Special: Without pneumatic cylinder Facts Weight: 4.9 kg Clamping force max: 4,000 N Holding force max: 18,000 N Angle: 90° eCl@ss: 21021004 ETIM: EC011973 Special features Lever clamp design Horizontal‑foot mounting for jig assembly Galvanised finish SKU: 682-6-M Category: Spanner FAQ What clamping and holding forces does the Kukamet 682 provide? The Kukamet 682 pneumatic lever clamp delivers a clamping force up to 4,000 N and a holding force up to 18,000 N (SKU 682-6-M). Is a pneumatic cylinder included with the clamp? No, the 682 is supplied without a pneumatic cylinder and is designed for integration with a separate pneumatic actuator selected to match the system requirements. How is the clamp mounted in a jig or fixture? Mounting is via the horizontal foot, allowing direct attachment to jigs and fixtures; the 90° lever angle provides compact locking clearance for adjacent tooling. What is the material and weight of the unit? The clamp is finished galvanised and weighs 4.9 kg, offering a balance of corrosion resistance and structural stability for workshop use. Which applications benefit most from this clamp? The 682 is suitable for production jigs, assembly fixtures and machining set‑ups where compact, high‑force holding and straightforward integration are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 40mm Horizontal Clamp Massive Holding Arm, 850N Thrust / 1000N Hold, Zinc Plated - Kukamet
Take advantage of the combination of a massive 40 mm holding arm, galvanised construction and a compact, 90° angle-foot mount for reliable fixture clamping in small jigs and production lines. Order directly via Metav Werkzeuge or consult the specialists for application advice. Horizontalspanner 113 — Horizontal clamp with 40 mm arm and angle-foot mounting by Kukamet Horizontalspanner 113 is a 90° horizontal clamp designed for secure holding in fixtures, jigs and assembly benches where compact, reliable clamping is required Robust 40 mm holding arm Galvanised steel for corrosion resistance Holding force up to 1,000 N Angle-foot mounting at 90° Consistent, measurable holding for production and workshop use The clamp provides a precise, reproducible hold thanks to a 1,000 N holding force and a closing force of 850 N, offering clear performance figures for process planning. The 40 mm arm delivers an extended lever for stable contact with workpieces, reducing the need for repeated adjustment in series production. These measurable values support faster setup times and predictable clamping behaviour, making the device suitable for small-batch fixtures as well as repeated manual operations. Durable materials for long service life in workshops Constructed from galvanised steel, the unit resists corrosion in humid shop environments and offers low maintenance over time. The massive holding arm improves stiffness under load, which helps maintain positional accuracy during machining or assembly tasks. At a weight of approximately 0.136 kg, the component is light enough for easy handling while still robust in operation, allowing straightforward retrofitting into existing clamping assemblies without significant additional support. Compact mounting and simple integration into jigs The angle-foot mounting at 90° enables immediate installation on fixture plates and machine tables where horizontal clamping is required. The compact footprint and standardised mounting style ease integration into bespoke jigs, while the lever-clamp design suits quick manual operation in assembly and inspection stations. The clamp’s form factor supports ergonomic interaction on the shop floor and reliable repeatability when used in combination with other clamping elements. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Horizontalspanner 113 into existing workholding systems and for assistance selecting complementary components Technical Data Article number (SKU): 113-1-D-C1 GTIN: 8680731505436 Manufacturer: Kukamet Brand: Kukamet ECLASS: 21041719 ETIM: EC011973 Facts Arm: 40 mm Weight: 0.136 kg Holding force: 1,000 N Closing force: 850 N Angle: 90° Special features Material: galvanised steel Mounting: angle-foot (Winkelfuß) Massiver Haltearm (massive holding arm) Suitable as a horizontal lever clamp in fixtures FAQ What maximum holding force does the clamp provide? The Kukamet Horizontalspanner 113 delivers a holding force of up to 1,000 N, with a closing force of 850 N stated for planning and comparison. Is the clamp suitable for corrosive or humid workshop environments? Yes, the clamp’s galvanised construction offers enhanced corrosion resistance, making the Horizontalspanner 113 appropriate for standard workshop conditions. Can the clamp be mounted on existing fixture plates? The 90° angle-foot mounting is designed for easy integration on fixture plates and benches; the Horizontalspanner 113’s compact footprint simplifies retrofitting. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 40mm Horizontal Clamp With Massive Arm And Safety Locking, Zinc Coated - Kukamet
Benefit from a robust, low-maintenance workholding solution that combines a galvanised finish, a 40 mm heavy-duty arm and a secure safety latch for consistent clamping performance. With holding capability up to 1,000 N and a compact 90° mounting, this horizontal clamp delivers reliable repeatability on assembly fixtures and jigs — order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Horizontal clamp 113 — galvanised horizontal clamp with 40 mm arm and safety latch (Kukamet) A Horizontal clamp 113 designed for secure 90° workholding, featuring a heavy holding arm and an integrated safety lock for safe clamping in production and workshop fixtures. Robust galvanised finish 40 mm heavy-duty clamping arm Safety locking mechanism 90° angled foot mounting Holding force up to 1,000 N Consistent clamping force for productive workflows The horizontal clamp offers defined mechanical performance with a maximum holding force of 1,000 N and a pressing capability of 850 N, providing a measurable basis for fixture design and process planning. The galvanised surface reduces corrosion risk in mixed workshop environments, extending service life and maintaining repeatability. For system planners, the clamp’s compact footprint and 90° angle allow straightforward integration into modular jigs, while the specificationed forces support load calculations and cycle-time optimisation. Fast mounting and safe operation reduce stoppages Designed with an angled foot mounting, the clamp installs quickly on profile plates and base plates without complex adapters, enabling shorter fixture assembly times. The safety latch prevents accidental release during handling or vibration, reducing the chance of workpiece slippage and unplanned downtime. The massive holding arm provides rigidity under load; this robust construction simplifies maintenance routines and supports continuous use in light industrial and craft applications where reliability matters. Durable materials minimise lifecycle costs Constructed from galvanised steel and weighing just 0.155 kg, the clamp is lightweight yet sturdy for repeated operation. Galvanisation protects the component in humid or mildly corrosive atmospheres, lowering replacement frequency and contributing to predictable maintenance budgets. The straightforward mechanical design means inspections and part swaps can be completed quickly, supporting lean workflows and helping sourcing teams rationalise supplier lists without compromising on quality. Discuss specification alignment and fixture compatibility with Metav Werkzeuge in Emmerich — our consultants provide precise technical guidance and secure supply for Kukamet fixtures Technical data SKU: 113-1-D-L-C1 GTIN: 8680731505740 Brand: Kukamet Core figures Arm length: 40 mm Weight: 0.155 kg Holding force: 1,000 N Maximum pressing force: 850 N Angle: 90° Special features Material: galvanised steel Mounting type: angled foot Massive holding arm Safety locking mechanism Category: Spanner FAQ What load can the clamp safely hold in fixtures? The clamp provides a maximum holding force of 1,000 N; this specification for the Horizontal clamp 113 supports dimensioning of workholding arrangements and safety margins. Is the surface finish suitable for workshop environments? Yes, the galvanised finish on the Horizontal clamp 113 protects against corrosion and is suitable for typical workshop and light industrial conditions. How is the clamp mounted to a fixture? Mounting uses an angled foot interface at 90°, allowing direct attachment to profile plates and base plates without special adapters. Does the clamp include any anti-release features? A dedicated safety locking mechanism is integrated to prevent unintentional opening during vibration or handling, improving process safety. Which brand and article should be specified for procurement? Specify Kukamet Horizontal clamp, SKU 113-1-D-L-C1, to ensure correct supply and compatibility. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 40mm Horizontal Clamp With Massive Holding Arm And Safety Lock, 850N Pressure - Kukamet
The combination of a solid holding arm, compact 40 mm swing and high holding force ensures reliable, repeatable workholding for light industrial and workshop fixtures; order directly via Metav Werkzeuge or consult our specialists for application guidance. Horizontal clamp 113 — horizontal toggle clamp with 40 mm arm and 1,000 N holding force (Kukamet) Horizontal clamp 113 is a compact horizontal toggle clamp designed for secure fixturing and repetitive assembly tasks in workshops and light industry. Solid holding arm with safety lock 1,000 N maximum holding force 40 mm swing arm for compact fixtures Angled base for 90° mounting Consistent hold for repeat processes The Horizontal clamp 113 delivers a dependable clamping solution where repeatability matters. With a 1,000 N holding force and an additional 850 N clamping pressure, the unit secures parts reliably during machining, welding or assembly. The lever-style mechanism provides fast locking and release, reducing cycle times and supporting efficient production flow. For teams less familiar with clamp terminology: holding force refers to the maximum resistance against pull-out, while clamping pressure denotes the compressive force applied to the workpiece. Space-saving design that improves bench layout A short, 40 mm swing arm and an angled base allow the clamp to be mounted close to fixtures without obstructing adjacent tooling. This compact footprint supports denser jig arrangements and simplifies fixture design in confined workspaces. The angled mounting foot sets the clamping plane at 90°, enabling straightforward integration into right-angle fixtures and reducing the need for additional adapters. The compact construction contributes to faster set-ups and a tidier workbench. Safe operation and long-term durability Constructed with a solid holding arm and equipped with a safety lock, the clamp minimises accidental opening during process steps, improving operator safety. The component surfaces are supplied with a blackened finish, which helps resist corrosion and wear in standard workshop environments. The robust build reduces the frequency of replacements, supporting sustainable procurement and steady uptime for production lines. Contact Metav Werkzeuge for purchasing details or to request tailored technical advice on the Kukamet Horizontal clamp 113 — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number / SKU: B113-1-D-L-C1 Manufacturer: Kukamet Facts Arm length: 40 mm Maximum holding force: 1,000 N Maximum clamping pressure: 850 N Mounting angle: 90° Mounting type: angled base Weight: 0.155 kg Special features Solid holding arm Safety lock Blackened finish Toggle / lever clamp design FAQ What materials can be clamped with this device? The Kukamet horizontal toggle clamp 113 is suitable for a wide range of workshop materials; its solid holding arm and clamping pressure make it appropriate for common metals, plastics and assemblies where the specified forces are sufficient. How is the clamp mounted to a fixture? Mounting is performed via the angled base supplied with the clamp; the 90° orientation supports direct attachment to right-angle fixtures or plates. Does the clamp stay locked under vibration? Yes, the integrated safety lock ensures the clamp remains engaged under typical shop-floor vibration and during intermittent process movement. Is the surface treated to resist corrosion? The clamp features a blackened finish, providing enhanced resistance against wear and mild corrosion in standard workshop conditions. What are the key dimensions relevant for fixture design? Important dimensions for layout are the 40 mm arm length, the 90° mounting angle and the compact body, plus the stated holding and clamping forces for calculating fixture loads. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 40mm Horizontal Clamp With Solid Arm, 850 N Thrust / 1,000 N Hold - Kukamet
Reliable clamping performance and compact dimensions combine to secure fixtures efficiently; the 40 mm solid holding arm and up to 1,000 N holding force ensure repeatable results while the angled foot allows simple right-angle mounting. Order the horizontal clamp directly via Metav Werkzeuge or consult our specialists for technical matching. Horizontal clamp 113 — Kukamet horizontal lever clamp with 40 mm arm and 90° angled foot The Horizontal clamp 113 is a right-angle lever clamp designed for firm workpiece holding in jigs and fixtures across machining and assembly tasks Massive holding arm 40 mm arm length Holding force 1,000 N Angled foot mount, 90° Consistent, measurable clamping for reliable repeatability The clamp delivers a clear distinction between clamping and holding: a clamping force of 850 N produces the active locking action while the holding force of 1,000 N secures the workpiece once engaged. This separation improves process reliability in repeated setups, reducing rework and minimising fixture adjustments. Measurable forces allow planners to calculate safety margins for delicate or heavy components, supporting predictable production flows. Durable construction that reduces downtime With a massive holding arm and a black oxide finish, the unit resists surface wear while remaining lightweight at 0.136 kg. The robust arm reduces elastic deflection during clamping, which contributes directly to positional stability in fixtures. The angled foot mounting offers a compact footprint and straightforward attachment to plates or blocks, enabling long service life with minimal maintenance in workshop conditions. Fast integration into jigs and modular fixtures The lever action of this horizontal lever clamp provides quick engagement and release, speeding up cycle times at assembly or machining stations. The 40 mm arm length and 90° orientation suit right-angle clamping tasks where a compact, repeatable solution is required. Installation into standard fixture arrangements is simplified by the angled-foot mounting style, enabling engineers to adapt the clamp for prototypes and production without complex redesigns. Contact Metav Werkzeuge for tailored fixture advice and to source the Kukamet Horizontal clamp 113 with 1,000 N holding force; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: B113-1-D-C1 GTIN: 8682843522196 Manufacturer: Kukamet eClass: 21041719 ETIM: EC011973 Facts Arm length: 40 mm Weight: 0.136 kg Holding force: 1,000 N Clamping force: 850 N Angle: 90° Special features Mounting type: angled foot Massive holding arm Finish: black oxide Lever clamp design FAQ What maximum holding force does the clamp provide? The Kukamet horizontal clamp 113 has a holding force of 1,000 N and a clamping force of 850 N for secure retention once engaged. How is the clamp mounted in a fixture? Mounting is via an angled foot at 90°, allowing straightforward attachment to right-angle plates and modular fixture elements. How long is the clamp arm? The arm length is 40 mm, which offers a compact reach suitable for many jigs and small fixtures. Is the arm construction robust enough for frequent use? Yes, the clamp features a massive holding arm with a black oxide finish for improved wear resistance and durability under repeated cycles. Which article number should be referenced when ordering? Reference SKU B113-1-D-C1 for the Kukamet Horizontal clamp 113 when enquiring or ordering. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 43mm Horizontal Clamp With Massive Holding Arm And Safety Lock, 850N/1000N - Kukamet
Take advantage of high holding capacity and compact mounting to keep fixtures stable and cycle times predictable; the combination of a massive holding arm, an integrated safety lock and a small footprint supports reliable clamping in production jigs — order via Metav Werkzeuge or contact the consultants for specification advice. 112 horizontal clamp by Kukamet — 850 N clamping force, 90° lever The 112 horizontal clamp is a compact lever clamp designed for secure fixturing at a 90° angle, suitable for fixtures, jigs and small assembly stations where space and repeatable fixation matter 850 N clamping force for reliable fixation 1,000 N holding capacity for secure retention Massive holding arm with safety lock Blackened finish for corrosion resistance Stable clamping that keeps processes running The clamp delivers a clear performance advantage through its 850 N clamping force and 1,000 N holding capacity, which together reduce part movement during machining or assembly. The difference between clamping force and holding capacity is practical: clamping force is the operative pressure applied to the workpiece, while holding capacity indicates the maximum static retention the device can withstand. By combining these figures with a robust lever mechanism, the component ensures repeatable positioning and fewer reworks, supporting improved throughput and lower scrap rates. The compact format contributes to efficient use of bench and fixture space without sacrificing performance. Robust construction and enhanced operator safety Constructed with a massive holding arm and an integrated safety lock, the device is built for frequent use in industrial environments. The heavy-duty arm increases torsional stiffness at the clamping point, reducing flex under load and improving positional stability. The safety lock prevents unintentional release once clamped, which protects both the operator and the workpiece during handling or transfer. A blackened finish provides basic corrosion resistance and a low-reflective surface that is advantageous in measurement and assembly areas. Vertical-foot mounting allows stable attachment to plates or fixtures while keeping the clamp accessible and compact. Compact dimensions for versatile fixture integration With an arm reach of 43 mm and a fixed 90° lever orientation, the clamp integrates easily into bespoke jigs and standardised fixture plates. Weighing approximately 0.1 kg, the unit is light enough to permit dense placement of multiple clamps where several locating points are required. The vertical-foot mounting type is particularly suitable when base-space is limited or when clamps must be fitted to upright plates. Given its mechanical simplicity, maintenance is straightforward: periodic inspection of the locking mechanism and lubrication of the pivot are sufficient to maintain consistent performance. For tailored applications, technical documentation is available to verify fit and clearances before integration. For secure, repeatable fixturing choose the Kukamet 112 horizontal clamp and contact Metav Werkzeuge in Emmerich for ordering and technical advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B112-1-D-L-C1 Brand: Kukamet Material: Blackened finish Mounting: Vertical foot Numbers / Core technical data Clamping force: 850 N Holding capacity: 1,000 N Arm reach: 43 mm Angle: 90° Weight: 0.1 kg Special features Massive holding arm Safety locking mechanism Vertical-foot mounting Compact lever clamp FAQ What is the maximum clamping force of this clamp? The clamp provides a clamping force of 850 N and a holding capacity of 1,000 N for secure fixation of parts. Can the clamp be mounted on vertical plates? Yes, the vertical-foot mounting is designed for attachment to upright plates and fixture bases. Is the locking mechanism secure for repeated handling? The integrated safety lock prevents accidental release and is suitable for repetitive production use. What dimensions are relevant when planning fixture layouts? Key dimensions include a 43 mm arm reach, a fixed 90° lever orientation and a unit weight of approximately 0.1 kg. Is the finish suitable for workshop environments? The blackened finish offers basic corrosion protection and a non-reflective surface suited to assembly and measurement areas. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 43mm Horizontal Clamp With Massive Holding Arm, 850N Closing Force / 1000N Retaining Force, Zinc Plated - Kukamet
Take advantage of precise, repeatable clamping with a solid holding arm and zinc-plated finish for long-term durability; combine clear measurable forces with simple horizontal mounting to streamline jig setup and fixture reliability. Order the clamp through Metav Werkzeuge or consult their specialists for integration advice. Horizontal toggle clamp 111 — zinc-plated, 90° horizontal base (Kukamet) A Horizontal toggle clamp 111 designed for secure 90° clamping in jigs and fixtures, featuring a robust holding arm and compact 43 mm reach. Zinc-plated construction for corrosion protection Massive holding arm for stable clamping 43 mm arm and 90° clamping angle Up to 1,000 N holding force, 850 N clamping force Consistent, measurable clamping performance for production The clamp delivers clearly specified mechanical values that support reliable process control: a clamping force of 850 N and a holding force of 1,000 N. The distinction matters in practice — clamping force is the applied closing pressure during engagement, while holding force indicates the resistance to part movement once secured. These figures enable planners and machinists to select a component that meets repeatability requirements and reduces rework due to slippage, supporting higher first-pass yield in assembly and machining operations. Robust mounting and fast actuation reduce cycle time With a horizontal base for secure fixture attachment, a massive holding arm and a 90° action, this clamp is built for quick engagement and repeatable positioning. The 43 mm arm provides sufficient reach and leverage for common jigs while keeping the actuation compact. The toggle mechanism converts hand force into a reliable locking action, which speeds up manual and semi-automated workflows and lowers operator fatigue during frequent clamping cycles. Workshop-ready finish and lightweight installation The zinc-plated surface gives corrosion resistance suited to general workshop environments, extending service life under regular use. At 0.108 kg, the component is light enough for straightforward mounting yet robust in operation, allowing secure attachment without adding unnecessary mass to delicate fixtures. The finish also simplifies cleaning and maintenance, helping to maintain consistent contact surfaces and predictable clamping behaviour over time. Practical compatibility and trusted sourcing for industrial use Designed for integration into standard fixtures, the clamp’s compact footprint and 90° orientation make it compatible with common jig layouts and modular tooling systems. Supplied under the Kukamet product line and distributed via Metav Werkzeuge, it benefits from Metav’s role as a quality filter for the European market — combining broad availability with documented reliability. The supplier’s experience and extensive range support efficient procurement and reduced vendor complexity for production departments and workshops. For tailored advice on integrating the Kukamet Horizontal toggle clamp 111 into fixtures or to request technical documentation and procurement through Metav Werkzeuge, contact Metav Werkzeuge for expert guidance and reliable delivery. Technical data SKU: 111-1-D-C1 GTIN: 8680731506457 ECLASS: 21041719 ETIM: EC011973 Core data Arm length: 43 mm Angle: 90° Clamping force max: 850 N Holding force max: 1,000 N Weight: 0.108 kg Special features Zinc-plated material Horizontal base mounting Massive holding arm 90° toggle action Category: Spanner FAQ What do the two force values mean for fixture design? Clamping and holding values indicate different performance aspects; the Horizontal toggle clamp 111 specifies 850 N clamping force for engagement and 1,000 N holding force for resistance to part movement, which helps engineers size clamps for secure fixturing. Is this clamp suitable for everyday workshop use? Yes, the zinc-plated finish on the Kukamet clamp offers corrosion resistance for typical workshop conditions while the robust arm and toggle action support frequent operation. How is the clamp mounted to a jig or fixture? The clamp is designed for a horizontal base mounting; secure the base to a flat fixture plate so the 90° arm movement aligns with the workpiece datum. What clearance and reach does the arm provide? The 43 mm arm provides compact reach and good leverage for most standard jigs, balancing clearance and clamping stability. Can this clamp be used in modular tooling systems? Its compact design and standard mounting orientation make it compatible with many modular jig systems; check fixture hole patterns and clearances before installation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 43mm Horizontal Clamp With Solid Holding Arm, 1,000N Holding Force, Galvanised - Kukamet
Take advantage of the combination of galvanised construction, 1,000 N holding force and a compact vertical mounting foot to secure fixtures reliably in confined jigs; order the horizontal clamp directly via Metav Werkzeuge or consult our advisers for integration support. Horizontal clamp 112 — Kukamet horizontal clamp with galvanised finish and 1,000 N holding force Horizontal clamp 112 is a lever-style horizontal clamp for fixture and workholding applications; designed for compact installations and repeatable clamping performance Galvanised construction for corrosion resistance Holding force 1,000 N for secure clamping Clamping force 850 N for reliable fixing Vertical mounting foot for compact installation Built to last where fixtures need reliable corrosion resistance The clamp combines a galvanised finish with a massive holding arm, delivering robustness in environments where surface protection matters. The corrosion-resistant coating reduces the risk of surface degradation over time, which translates into lower maintenance and a longer service life for workshop fixtures. The substantial arm provides dimensional stability under repeated cycles, ensuring the clamping geometry remains consistent and minimises rework due to component movement. Consistent force for secure, repeatable workholding Engineered for dependable performance, the device offers a holding force of 1,000 N and a clamping force of 850 N, values that support secure retention of workpieces in light to medium-duty operations. These figures reflect the mechanical advantage of the lever mechanism and allow planners to assess suitability against fixture design requirements. The predictable force output aids process reliability and reduces variability during machining or assembly sequences, contributing directly to higher first-pass yield and fewer interruptions. Space-saving mounting and straightforward integration into jigs With a vertical mounting foot and a short 43 mm arm, the clamp occupies minimal lateral space while providing a 90° clamping orientation, ideal for tight fixture layouts. The low mass and compact footprint permit multiple units to be fitted in close proximity, enabling flexible clamping arrangements without significant added weight. The component’s modest weight supports easy handling during jigs assembly and replacement, simplifying fixture configuration changes on the shop floor. Speak to Metav Werkzeuge about the Kukamet horizontal clamp 112 with its 1,000 N holding force — our advisers in Emmerich will assist with specification and supply for immediate integration Technical data SKU: 112-1-D-C1 GTIN: 8680731500998 Brand: Kukamet Article name: Horizontal clamp 112 Facts Holding force: 1,000 N Clamping force: 850 N Arm length: 43 mm Angle: 90° Weight: 0.114 kg EClass: 21041719 ETIM: EC011973 Special features Galvanised material Massive holding arm Vertical mounting foot 90-degree configuration FAQ What materials is this clamp suitable for? The horizontal clamp 112 is supplied in a galvanised finish and is suitable for general fixture applications with a range of common workshop materials; suitability depends on the fixture design and the holding force required. How is the clamp mounted in a jig? Mounting is via the vertical mounting foot; the 90° orientation and compact base allow direct attachment to fixture plates or subplates, enabling close-packed arrangements. What retention and clamping forces can be expected? Rated values are a holding force of 1,000 N and a clamping force of 850 N, which provide reliable retention for light to medium-duty workholding tasks. Is the arm suitable for repeated cycle use? The clamp’s massive holding arm is designed for durability under repeated cycles, delivering consistent clamping geometry and reducing the need for frequent adjustments. Can multiple clamps be used together in a confined space? Yes, the compact 43 mm arm length and vertical foot allow multiple units to be positioned closely for multi-point clamping strategies. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 450 N Horizontal Clamp With 520 N Holding Force, Stainless Steel - Kukamet
Take advantage of a compact, corrosion‑resistant clamping solution with stainless steel construction and a reliable 450 N pressing capacity; the robust 90° horizontal foot makes integration into fixtures straightforward. Order the horizontal clamp directly via Metav Werkzeuge or consult the team for configuration advice. Horizontal clamp 111 — Kukamet | Stainless steel, 90° horizontal foot The Horizontal clamp 111 is a compact 90° horizontal clamping lever engineered for light industrial fixturing and workshop bench applications, offering dependable holding during assembly and testing. Stainless steel construction 450 N maximum pressing force 520 N holding force Horizontal-foot mounting, 90° orientation Strong, corrosion‑resistant clamping for reliable fixtures This compact clamping lever is manufactured from stainless steel, delivering long‑term resistance to corrosion and wear in shop environments where durability matters. The combination of a 450 N maximum pressing force and a 520 N holding force provides a predictable clamping regime that supports repeatable assembly and machining tasks. By specifying a corrosion‑resistant material together with clearly defined force values, the device enables process planners to match fixture loads to component and tooling requirements, reducing downtime caused by slippage or rework. Simple horizontal mounting that saves space and assembly time Designed with a horizontal foot and a 90° orientation, the clamp is intended for installation on flat fixture plates and machine tables where lateral access is required. The clamping spindle is supplied as M4x25, a common thread/length for compact fixtures, which simplifies integration into existing setups without special adapters. At just 0.042 kg, the unit keeps mass low, helping maintain balance on delicate jigs and reducing the load on movable subassemblies. Technical terms: the spindle designation M4x25 denotes a metric thread with a 4 mm diameter and a 25 mm thread length. Versatile application and dependable sourcing for production environments The device suits small to medium fixturing tasks across workshops and light production lines where compact, hygienic materials are required—stainless steel being particularly suitable in environments with regular cleaning or exposure to coolants. Supplied by Kukamet and distributed via Metav Werkzeuge, the clamp benefits from a quality‑filtered supply chain that supports reliable stock and consistent specifications. This supply assurance helps maintenance planners and purchasers ensure compatibility across batches and reduces the administrative burden of multiple suppliers. For corrosion‑resistant, space‑efficient fixturing choose the Kukamet Horizontal clamp 111 — contact Metav Werkzeuge in Emmerich for procurement and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S111-0 GTIN: 8680731504675 Manufacturer: Kukamet Material: Stainless steel Weight: 0.042 kg Pressing force, max: 450 N Holding force, max: 520 N Fastening type: Horizontal foot Spindle thread/length: M4x25 Angle: 90° Facts Weight: 0.042 kg Pressing force (max): 450 N Holding force (max): 520 N Angle: 90° Special features Material: Stainless steel Fastening: Horizontal foot Spindle: M4x25 Category: Spanner eCl@ss: 21041719 ETIM: EC011973 SKU: S111-0 GTIN: 8680731504675 FAQ What materials is this clamp suitable for? The clamp is made from stainless steel and is suitable for general workshop use; the Kukamet Horizontal clamp 111 is commonly used with metal components and fixtures where corrosion resistance is required. How much clamping force does the device provide? Maximum pressing force is 450 N and the maximum holding force is 520 N as specified for the Kukamet clamp, allowing planners to assess suitability for light to medium clamping tasks. How is the clamp mounted to a fixture plate? Mounting is via a horizontal foot with a 90° orientation; the clamping spindle is M4x25 for straightforward attachment to most fixture plates and compact jigs. Is the clamp suitable for hygienic or coolant‑exposed environments? Yes—constructed from stainless steel, the clamp withstands regular cleaning and moderate exposure to coolants, making the unit appropriate where corrosion resistance is required. What is the unit weight and why does it matter? The unit weight is 0.042 kg; the low mass reduces added load on movable fixtures and aids balance on precision jigs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 450 N Horizontal Clamp, Zinc Plated, 520 N Holding Force - Kukamet
Take advantage of the combination of galvanised durability, compact design and reliable holding force for consistent production results; order the clamp directly via Metav Werkzeuge or ask our consultants if needed. Horizontal toggle clamp 111 – galvanised horizontal foot, 520 N holding force (Kukamet) Horizontal toggle clamp 111 is a compact horizontal clamp intended for repeatable workholding in assembly jigs and light-duty fixtures, offering corrosion-resistant construction and dependable clamping performance. Galvanised corrosion protection 520 N holding force Horizontal foot for secure mounting M4x25 pressure spindle for fine adjustment Consistent clamping for repetitive production The toggle mechanism delivers a reproducible clamping action that reduces setup variance and shortens cycle times. With a specified holding force of 520 N and a maximum clamping force of 450 N, the unit provides measurable performance that supports predictable process control. The compact construction and defined 90° operating angle allow integration into small fixtures without compromising access or visibility, while the low mass contributes to reduced inertia in automated assemblies. Simple mounting and precise adjustment for jig builders Equipped with a horizontal foot, the clamp mounts easily to flat plates and bench fixtures, creating a low-profile workholding point that keeps components accessible. The M4x25 pressure spindle permits fine adjustment of contact pressure and compensates for part tolerances, translating into fewer rejected parts and less rework. The design is optimised for quick fixture changes and repeatable positioning, which benefits production lines that require frequent part turnover or short runs. Robust finish and low-maintenance operation A galvanised surface treatment safeguards against corrosion in typical workshop environments, extending service life and reducing maintenance cycles. The clamp is supplied without an arm fitted, keeping the mechanism straightforward and reliable for general-purpose clamping tasks. The lightweight construction (approx. 0.042 kg) and lever-style actuation support ergonomic handling during installation and manual operation, while the simple geometry minimises wear points over long-term use. Contact Metav Werkzeuge for availability, specification support or a tailored quotation — Metav Werkzeuge can supply the Kukamet Horizontal toggle clamp 111 directly from Emmerich (info@metav-werkzeuge.com | +49 2822 7131930) Technical data Article number: 111-0 GTIN: 8680731500004 Manufacturer: Kukamet Facts Max clamping force: 450 N Max holding force: 520 N Weight: 0.042 kg Angle: 90° Spindle: M4x25 Special features Galvanised finish Horizontal foot mounting No arm fitted Lever-style clamp (horizontal) FAQ What is the primary use of this clamp? The Kukamet Horizontal toggle clamp 111 is intended for repeatable workholding in assembly jigs and light fixtures where a reliable horizontal clamping action is required. Can the clamp be adjusted to compensate for part tolerances? Yes, the M4x25 pressure spindle on the Horizontal toggle clamp 111 allows fine adjustment of the contact point to account for varying part thicknesses. Is the clamp suitable for outdoor or humid workshop environments? The galvanised finish on the Horizontal toggle clamp 111 provides corrosion resistance suitable for typical workshop and sheltered outdoor conditions. What mounting method does the clamp use? The clamp uses a horizontal foot for secure mounting to flat surfaces and fixture plates. How much holding force does the clamp provide? The clamp offers a maximum holding force of 520 N and a clamping force up to 450 N, giving measurable performance for light-duty applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 4500 N Pneumatic Clamp Three-Point Massive Holding Arm, Galvanised - Kukamet
Benefit from 5,000 N holding force, a 230 mm reach and a galvanised, 90° vertical mounting that secures workpieces reliably in repetitive production. Order the Kukamet pneumatic clamp 651 directly via Metav Werkzeuge or ask our consultants for tailored fixture advice. 651 Pneumatic clamp — vertical mounting, 230 mm reach A robust 651 pneumatic clamp designed for secure, repeatable clamping in jigs and assembly fixtures, ideal where space is limited and high holding forces are required Massive holding arm for high stability 230 mm reach for deep clamping tasks 90° vertical base for space-saving fixation Galvanised body for workshop resilience Consistent clamping power that keeps production running The pneumatic clamping device delivers a combination of controlled actuation and measurable retention: a maximum actuation force of 4,500 N with a steady holding force of 5,000 N ensures components remain locked during machining cycles or assembly operations. This predictability reduces rework and scrap rates, supporting higher first-pass yields. The pneumatic mechanism provides fast cycle times compared with manual levers, enabling shorter takt times while keeping clamping pressure consistent across shifts. For engineers and production managers, that translates into fewer stoppages and a more reliable process flow. Space-saving vertical mounting that simplifies fixture design With a vertical base and a fixed 90° operating angle, the clamp is intended for compact fixture layouts where lateral space is at a premium. The 230 mm reach gives the clamping arm extended access to recesses and deep-set workpieces without requiring bulky substructures. Mounting on a vertical foot simplifies integration into existing plates or pallets and keeps the clamping geometry predictable for repeat setups. This design supports modular tooling concepts and makes the component straightforward to specify in CAD assemblies and fixture bills of materials. Built for workshop durability and low intervention Constructed in a galvanised finish and fitted with a massive holding arm, the clamp resists corrosion and mechanical wear typical in shop-floor environments. The robust build reduces the frequency of replacements and supports long-term fixture integrity, lowering total cost of ownership. Routine checks are limited to pneumatic supply and visible wear points; because the device is mechanically simple, in-house maintenance teams can perform inspections quickly without specialist tools. The result is dependable uptime and reduced logistic effort for spare items. For reliable, high‑force pneumatic clamping choose the Kukamet 651 via Metav Werkzeuge — contact Metav Werkzeuge for advice and specification support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 651-5-D-C3 Brand: Kukamet Model designation: 651 Eclass: 21021004 ETIM: EC011973 Facts Arm length: 230 mm Max actuation force: 4,500 N Max holding force: 5,000 N Operating angle: 90° Special features Material: galvanised Mounting: vertical base (vertical foot) Massive holding arm Category: Spanner FAQ What clamping force can be expected from this device? The Kukamet 651 pneumatic clamp achieves a maximum actuation force of 4,500 N and a holding force up to 5,000 N, providing secure retention for repetitive operations. Is the clamp suitable for compact fixture layouts? Yes, the 90° vertical base and the 230 mm reach make the clamp well suited to space‑limited fixtures and palletised systems where a vertical mounting is required. What materials and finishes ensure workshop durability? The galvanised construction and the massive holding arm give the clamp enhanced resistance to corrosion and mechanical wear, reducing maintenance frequency. Can this clamp be integrated into existing jigs and CAD assemblies? The compact vertical mounting and standardised geometry allow straightforward integration into jigs and fixture designs; the SKU 651-5-D-C3 can be referenced in bills of materials and CAD models. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com