Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
90° 68mm Horizontal Clamp With Massive Holding Arm, 2.5kN Holding Force - Kukamet
Robust clamping performance combined with a compact footprint makes this lever clamp ideal for fixtures where space and repeatability are critical; the massive holding arm and 2.5 kN holding force ensure secure workpiece retention. Order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. Horizontal clamp 111 (B111-3-D-C1) by Kukamet — 90° lever clamp, 2.5 kN holding force A Horizontal clamp 111 designed for secure 90° positioning in jigs and fixtures, featuring a heavy-duty holding arm and a horizontal mounting foot for compact assembly. Massive holding arm for durable clamping 2.5 kN maximum holding force Compact 68 mm arm length Horizontal mounting foot, 90° open angle Improved fixture reliability through high holding force The solid lever design delivers a holding force of 2,500 N (2.5 kN) and a maximum pressing force of 2,300 N, providing measurable stability during machining or assembly cycles. This mechanical performance reduces micro-movement of the workpiece, which in turn increases process reliability and repeatability. The compact arm minimises interference in dense fixtures while retaining a high clamping capacity, making the component suitable for repetitive, short-cycle operations in production and workshop environments. Space-saving mounting and durable finish for long service life Equipped with a horizontal mounting foot and a fixed 90° open angle, the clamp integrates easily into base plates and custom jigs without additional adapters. The black blued finish offers corrosion resistance and wear protection for the steel components, helping to preserve contact surfaces and geometry over time. The massive arm construction concentrates material where strength is needed, lowering the risk of deformation under load and reducing the frequency of maintenance interventions. Fast, repeatable clamping that improves throughput Weighing just 0.3 kg and featuring a 68 mm lever arm, the clamp combines low mass with high effectiveness; the low inertia speeds manual handling and positioning in assembly tasks. The lever mechanism provides a clear tactile engagement, allowing operators to apply consistent clamping force quickly and with minimal adjustment. For small to medium production runs, the result is reduced setup time and stable process outputs, supporting smoother production flow and fewer rejected parts. Select the Kukamet Horizontal clamp 111 for dependable 2.5 kN clamping in compact fixtures — contact Metav Werkzeuge for tailored application advice and product availability: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: B111-3-D-C1 GTIN: 8680731506990 Manufacturer: Kukamet Eclass: 21041719 ETIM: EC011973 Facts Arm length: 68 mm Holding force max: 2,500 N Pressing force max: 2,300 N Angle: 90° Weight: 0.3 kg Special features Massive holding arm Horizontal mounting foot Black blued finish Compact lever clamp design FAQ What is the maximum holding force of this clamp? The clamp offers a maximum holding force of 2,500 N (2.5 kN); the Kukamet Horizontal clamp 111 is specified for demanding retention in fixtures. How is the clamp mounted in a fixture? Mounting is via a horizontal mounting foot designed for secure attachment to base plates and jigs; the 90° open angle suits perpendicular clamping arrangements. What material and finish are used for the clamp? The unit is supplied with a black blued finish on steel components to enhance wear resistance and surface protection. Is the clamp suitable for tight or compact assemblies? Yes, the compact 68 mm arm and low weight (0.3 kg) make the clamp suitable for confined fixture spaces where interference must be minimised. Which SKU should be ordered for this model? Order reference SKU B111-3-D-C1 for the Kukamet Horizontal clamp 111. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 68mm Horizontal Clamp With Solid Holding Arm, 2.3kN Closing Force, Galvanised - Kukamet
Robust galvanised construction, a 68 mm clamping arm and up to 2,500 N holding force combine to deliver reliable, repeatable clamping for light to medium jigs and fixtures. Order the clamp directly via Metav Werkzeuge or contact the consultants for detailed technical advice. Horizontal clamp 111 – horizontal clamp with 68 mm arm, galvanised (Kukamet) The Horizontal clamp 111 is a compact horizontal mounting clamp for fixtures and jigs, offering a 68 mm arm and a galvanised body for secure 90° clamping in workshop and production environments. 68 mm clamping arm for compact setups Up to 2,500 N holding force Galvanised corrosion-resistant finish Horizontal foot mounting at 90° Consistent clamping performance that improves process reliability The 68 mm arm and a massive holding arm deliver a low-profile yet stable grip that helps reduce part movement during machining and assembly. The specified figures — 2,300 N maximum pressing force and 2,500 N maximum holding force — describe two different functions: pressing force is the actuating load applied by the lever, while holding force is the sustained grip on the workpiece. Designed for repeated cycles, this clamp provides measurable, reproducible performance that supports process standardisation and reduces rework. The compact design and defined 90° clamping geometry simplify fixturing calculations and help maintain consistent tolerances. Quick mounting and simple integration into fixture assemblies Equipped with a horizontal foot for secure attachment, the clamp integrates easily into assembly jigs and fixture plates without extensive modification. At just 0.3 kg, the unit is lightweight enough to be repositioned during prototyping yet rigid enough for stable operation in serial production. The horizontal foot and compact arm length reduce space requirements on the fixture plate, enabling denser tooling layouts and faster changeovers. Precision in alignment and easy mechanical operation translate into shorter setup times and higher throughput on the shop floor. Durable finish and robust components for lower maintenance A galvanised finish protects the clamp from corrosion in workshop environments and simplifies upkeep; the protective coating extends service intervals and maintains consistent surface condition where contact and sliding occur. The robust construction of the holding arm resists deformation under repeated loading, which preserves clamping accuracy over time and minimises downtime for replacement or adjustment. Built to withstand everyday industrial use, this clamp offers economical longevity that supports reliable production schedules. Choose the Kukamet 111 horizontal clamp for dependable 2,500 N holding performance — contact Metav Werkzeuge for procurement and bespoke advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 111-3-D-C1 GTIN: 8680731500141 Manufacturer: Kukamet Facts Clamping arm: 68 mm Max pressing force: 2,300 N Max holding force: 2,500 N Angle: 90° Weight: 0.3 kg Special features Galvanised finish Massive holding arm Horizontal foot mounting Category: Clamps FAQ What is the difference between pressing force and holding force? Pressing force refers to the actuating load (listed as 2,300 N), while holding force is the sustained clamp grip (listed as 2,500 N) for the Horizontal clamp 111 Can the clamp be mounted on standard fixture plates? Yes, the horizontal foot mounting is designed for secure attachment to fixture plates and assembly jigs, enabling straightforward integration How much space does the clamp require on a jig? The 68 mm clamping arm and compact body minimise footprint, allowing denser tooling arrangements on the fixture plate Is the surface finish suitable for humid workshop environments? The galvanised finish provides corrosion resistance and helps maintain reliable operation in typical shop conditions What is the product SKU for ordering and reference? The clamp is listed under SKU 111-3-D-C1 for procurement and technical reference Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 850 N Horizontal Clamp With Massive Holding Arm And Safety Lock, Blackened Finish - Kukamet
Take advantage of a compact, high-force clamp that combines a 93 mm massive holding arm with a safety locking mechanism for reliable fixture work. The horizontal mounting foot and 90° orientation enable low-profile installation and repeatable clamping. Order the clamp directly via Metav Werkzeuge or consult the technical team for specification support. Horizontal clamp 111 — compact horizontal toggle clamp with 93 mm arm and safety lock Horizontal clamp 111 is a lever-style fixture clamp designed for secure, repeatable workholding in jigs and assemblies Robust 93 mm holding arm 90° horizontal mounting foot Safety locking mechanism Holding force up to 1,000 N Secure clamping for precision jigs and fixtures The clamp delivers a controlled, repeatable hold by combining a massive holding arm with defined clamping and holding capacities. A maximum clamping force of 850 N and a holding force of 1,000 N are specified, ensuring that components remain stationary during machining, assembly or inspection tasks. The functional principle is simple: a lever action converts operator input into a consistent clamp load, which reduces variability in batch processes and improves process reliability. This makes the device suitable for small-series production and fixture-based manufacturing where repeatability matters. Low-profile installation that saves space on the workbench Designed for horizontal mounting, the clamp uses a horizontal mounting foot set at 90°, enabling installation flush to plates and baseplates. With an arm length of 93 mm and a nominal weight of 0.1 kg, the unit minimises encroachment into the working area and is suitable for confined fixtures. The compact footprint supports close-packed tool layouts and simplifies pallet or jig design, while the lever geometry allows fast engagement and release without additional mechanisms. Robust finish and safety features for long service life Constructed with a black oxide finish, the clamp is protected against light corrosion while maintaining a professional workshop appearance. The safety locking mechanism prevents accidental opening under vibration or during handling, increasing operational safety in automated or semi-automated setups. The combination of a solid arm and locking device reduces downtime caused by clamp slippage or unexpected release, contributing to a predictable production flow and lower rework rates. Integration, compatibility and application scenarios The lever-style clamp is identified as SKU B111-1-D-L-C2 and is offered by Kukamet for use in fixture building, assembly stations and inspection tables. As a toggle clamp, it is compatible with common mounting patterns for horizontal clamps and can be incorporated into welded frames or bolted plates. The simple mechanical design requires no external power and can be paired with mechanical stops or locating pins to form a complete workholding solution. Technical buyers benefit from clear specification data when designing fixtures or comparing component options. For fixture projects requiring a compact, high-holding-force clamp, contact Metav Werkzeuge to request a quotation or technical consultation for the Kukamet Horizontal clamp 111. Technical Data Article number: B111-1-D-L-C2 E-class: 21041719 ETIM: EC011973 Facts Arm length: 93 mm Angle: 90° Clamping force max: 850 N Holding force max: 1,000 N Weight: 0.1 kg Special features Mounting: horizontal foot Finish: black oxide Massive holding arm Safety locking mechanism Model: Horizontal clamp (111) FAQ What clamping and holding forces are specified for this clamp? The clamp is specified with a clamping force of 850 N and a holding force of 1,000 N, providing stable retention for fixture applications. Is the clamp suitable for use in compact fixtures with limited headroom? Yes, the compact lever design and 90° horizontal mounting foot allow installation in low-profile jigs and close-packed fixture layouts. What safety provision prevents accidental release during vibration? A dedicated safety locking mechanism is incorporated to secure the clamp once engaged and to prevent unintended opening. Can the clamp be used without additional power sources? The lever-operated design functions mechanically and requires no external power, making it suitable for manual and semi-automatic workstations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 850N Horizontal Clamp With Safety Lock, Zinc Plated, 1000N Holding Force - Kukamet
Benefit from a cost-effective, zinc-plated solution with a secure safety lock and up to 1000 N holding force for dependable fixture clamping; order directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal Clamp 112 — compact horizontal clamp with safety lock (Kukamet) A robust Horizontal Clamp 112 engineered for secure 90° clamping in fixtures and jigs, suited to small assemblies and repetitive production tasks. Zinc-plated finish for corrosion resistance Integrated safety lock for accidental-release prevention 90° orientation for horizontal fixture applications Up to 1000 N holding force for reliable retention Dependable clamping performance for everyday production The clamp combines a compact form with robust holding capacity, delivering a measured holding force of 1000 N and a clamping force of 850 N. These figures indicate the device’s ability to retain components under load and resist movement during machining, assembly or inspection operations. The zinc-plated surface provides corrosion protection in workshop environments, prolonging service life and reducing replacement intervals. By specifying measurable force values, planners and technicians can integrate the clamp into fixtures with predictable performance. Safe, repeatable operation that simplifies handling A mechanical safety lock prevents unintended release of the lever, reducing the risk of workpiece movement and improving operator confidence during repetitive cycles. The unit’s vertical foot mounting creates a secure attachment to production tables or jigs and enables a fixed 90° clamping orientation, which is helpful when positioning components for machining or assembly. The design minimises set-up time and offers consistent clamping action, supporting a smooth workflow with fewer interruptions. Compact design for tight fixtures and quick integration With a lightweight construction and compact footprint, the clamp is suited to confined fixtures where space savings are essential. The horizontal clamp geometry permits low-profile installation without sacrificing retention capability, while the included M5x35 pressure spindle allows fine contact adjustment. The straightforward mechanical arrangement supports maintenance-friendly use and keeps consumables to a minimum, contributing to lower total operating overhead in busy production environments. For secure fixture solutions backed by Kukamet build quality, contact Metav Werkzeuge for tailored advice and ordering assistance at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data SKU: 112-1-L GTIN: 8680731500394 Brand: Kukamet Category: Spanner eClass: 21041719 ETIM: EC011973 Core specifications Clamping force: 850 N Holding force: 1000 N Angle: 90° Weight: 0.125 kg Pressure spindle: M5x35 Features & materials Material: zinc-plated Safety lock: yes Mounting: vertical foot Type: horizontal clamp Hand lever style: lever clamp FAQ What load can this clamp safely hold? The Horizontal Clamp 112 is specified with a holding force of 1000 N and a clamping force of 850 N, values that guide safe load expectations for fixture design. Is the finish suitable for humid workshop environments? The zinc-plated surface on the Kukamet clamp provides corrosion resistance appropriate for typical workshop and production settings. How is the clamp mounted to a fixture? This model uses a vertical foot mounting arrangement, enabling secure attachment to tables and jig plates for 90° horizontal clamping. Does the clamp include an adjustable contact element? Yes, the unit features an M5x35 pressure spindle for contact adjustment to fine-tune clamping pressure and accommodate part tolerances. Will the clamp prevent accidental release during operation? An integrated safety lock is provided to reduce the risk of unintended lever release and improve safety during repetitive handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 850N Horizontal Clamp With Safety Lock, Zinc-Plated, 1000N Hold Force - Kukamet
Compact, secure clamping with clear industrial specifications: the unit combines a holding force of up to 1,000 N, a clamping force of 850 N, and a zinc‑plated finish to deliver dependable, low‑maintenance performance in repetitive jigs and fixtures. Order the horizontal toggle clamp directly via Metav Werkzeuge or consult our advisors for application guidance. Horizontal toggle clamp 113 with angle base and safety lock — Kukamet The Horizontal toggle clamp 113 is a compact industrial clamp designed to secure workpieces at 90° for repetitive clamping tasks in jigs, fixtures and assembly operations. Angle base for 90° mounting Safety locking mechanism included Holding force up to 1,000 N Zinc-plated, corrosion-resistant finish Consistent force and compact design for repetitive production The clamp delivers a holding force of 1,000 N and a clamping force of 850 N, providing measurable and repeatable retention for short-cycle production tasks. The compact construction and low mass (approx. 0.155 kg) reduce inertia in movable fixtures and help maintain cycle times. The spindle thread M5x35 allows straightforward integration with standard fixture plates; the zinc-plated surface offers basic corrosion protection for workshop environments. These technical attributes support efficient part handling and predictable results in series workflows. Secure operation and simple, space-saving mounting Installation uses an angle base for right-angle mounting, making the clamp suitable for vertical or horizontal fixture faces where a fixed 90° orientation is required. A mechanical safety locking device prevents unintended release during handling or vibration, which increases operator safety and reduces the risk of loose workpieces. The compact footprint and straightforward mounting method minimise jig complexity and allow the clamp to be fitted into dense tooling layouts without extensive redesign. Practical benefits for workshops and assembly lines Engineered as a robust toggling solution, this clamp is aimed at applications that demand rapid, repeatable securing rather than fine positional adjustment. The corrosion-resistant finish and reliable locking mechanism reduce maintenance intervals and downtime, supporting continuous operation in production cells or manual assembly benches. Where quick clamping and unclamping are essential, the clamp provides dependable retention with minimal setup effort and clear numeric performance values for planning jigs and process validation. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet horizontal toggle clamp 113 into production fixtures and for supply from our Emmerich distribution centre: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 113-1-L GTIN: 8680731500738 Model: 113 Facts Clamping force max: 850 N Holding force max: 1,000 N Weight: 0.155 kg Angle: 90° Spindle thread: M5x35 Special features Material: zinc-plated Mounting: angle base Safety lock: yes Category: Clamps FAQ What is the maximum holding force of this clamp? The Kukamet horizontal toggle clamp 113 provides a holding force of up to 1,000 N and a clamping force of 850 N for predictable retention in jigs and fixtures. Can the clamp be mounted at right angles? Yes. The clamp uses an angle base for 90° mounting, making the 113 suitable for vertical or horizontal fixture faces where a right-angle orientation is required. Does the clamp include a safety mechanism? A mechanical safety locking device is integrated into the Kukamet clamp 113 to prevent accidental release during handling and vibration. What material finish does the clamp have? The Kukamet 113 is zinc-plated, offering corrosion-resistant properties suitable for standard workshop environments. Which spindle thread is provided for fixture integration? The clamp is supplied with an M5x35 spindle thread for straightforward fitting to common fixture plates. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 91mm Horizontal Clamp With Massive Arm, Safety Lock, 3.65kN Hold Force - Kukamet
Robust clamping performance meets compact installation: the combination of a massive holding arm with safety lock and a maximum holding force of 3,650 N ensures secure fixturing with minimal footprint. Fast integration is supported by the 90° angle-foot mount and a lightweight body, so ordering is straightforward — purchase the clamp directly via Metav Werkzeuge or consult the sales advisors for application advice. Horizontal clamp 113 — Kukamet horizontal clamp with massive holding arm and 3,650 N holding force The horizontal clamp 113 is a lever-style horizontal clamp designed for secure workpiece retention in fixtures and jigs, featuring an angle-foot mount for space-saving assembly. Massive holding arm with safety lock 3,650 N maximum holding force 90° angle-foot mounting Lightweight 0.94 kg body Secure retention that reduces rework and downtime The clamp delivers a maximum holding force of 3,650 N, combined with a maximum actuation force of 3,500 N, which is converted into consistent clamping pressure by the lever mechanism. This mechanical ratio means workpieces are held firmly during machining or assembly, reducing the risk of movement and subsequent rework. The presence of a safety locking mechanism prevents accidental release once the clamp is set, so fixtures remain reliable over repeated cycles. For production environments where repeatability and process stability matter, this robust clamp supports safer, more efficient workflows. Space-saving design for versatile fixture integration With an arm length of 91 mm and a 90° angle-foot mounting, the clamp is engineered for compact installation in confined jig spaces. The short arm reduces lateral projection while maintaining leverage, allowing the device to be positioned close to the workpiece without obstructing tooling paths. At 0.94 kg, the unit is light enough to be mounted on movable jigs or indexing fixtures without significantly increasing system mass. These characteristics make the clamp suitable for small to medium fixtures in metalworking, assembly stations and welding jigs where footprint and accessibility are decisive factors. Durable finish and straightforward installation for reliable daily use The body is delivered in a blackened finish, providing corrosion resistance and a professional appearance that suits workshop environments. The construction includes a massive holding arm, engineered for strength under repeated load, and an angle-foot base that simplifies secure attachment to fixture plates. Mechanical parts are designed to withstand frequent operation; routine inspection and lubrication of pivot points ensure long service life. The solid engineering of the clamp minimises maintenance intervals and supports steady production output over time. For procurement or technical clarification regarding the Kukamet horizontal clamp 113, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich. Technical data SKU: B113-4-D-L-C1 Manufacturer: Kukamet Category: Spanner Facts Arm length: 91 mm Angle: 90° Weight: 0.94 kg Maximum holding force: 3,650 N Maximum actuation force: 3,500 N Special features Mounting type: angle-foot Material/finish: blackened finish Massive holding arm Safety locking mechanism FAQ What is the maximum holding force of the clamp? The maximum holding force is 3,650 N for the Kukamet horizontal clamp 113 (SKU B113-4-D-L-C1), ensuring secure retention for typical fixture applications. How is the clamp mounted in a fixture? Mounting is performed via the 90° angle-foot, which allows the clamp to be fastened to a fixture plate with the holding arm positioned horizontally for lever action. What are the key dimensions to consider for layout? The most relevant dimension is the 91 mm arm length; the compact projection and angle-foot base make integration into tight layouts straightforward. Is the clamp suitable for frequent cycle use? Yes. The robust design with a massive holding arm and safety locking mechanism is intended for repeated operation; regular lubrication of pivot points is recommended. Which surface treatment is applied to the clamp? The clamp is supplied with a blackened finish, providing basic corrosion resistance and a uniform workshop appearance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 91mm Horizontal Clamp With Massive Holding Arm, 3.65kN Holding Force - Kukamet
Take advantage of the combination of robust holding power, a massive holding arm and compact weight for dependable fixture clamping. Order the horizontal clamp directly via Metav Werkzeuge or consult our specialists if technical advice is required. Horizontal clamp 113 – Kukamet horizontal toggle clamp with 3,500 N clamping force The Horizontal clamp 113 is a compact toggle clamp designed for secure workholding on jigs, fixtures and assembly stations, featuring a 90° angle base for straightforward mounting. Massive holding arm for high stability 3,500 N clamping force 90° angle base for fixture mounting Blackened finish for corrosion resistance Engineered for dependable, repeatable clamping This horizontal toggle clamp delivers high clamping reliability through a combination of robust mechanics and a massive holding arm that reduces deflection under load. The device’s 3,500 N clamping force and 3,650 N holding force ensure secure retention of workpieces during machining, welding or assembly operations. The mechanism is designed for rapid engagement and disengagement, offering consistent repeatability that supports efficient cycle times and predictable process results. Technical users benefit from a clear force rating that aids fixture design and risk assessment. Easy integration into fixtures and compact workstations The clamp integrates cleanly into purpose-built jigs because of its angle base and compact footprint. With an arm length of 91 mm and a total weight of 0.84 kg, it suits confined spaces without compromising stiffness. The toggle clamp principle converts short lever travel into high clamping force, which simplifies fixture layouts and reduces operator effort during manual loading. For production planners and workshop managers, this means reduced handling time and easier automation interfacing when consistent clamping is required. Durable finish and reliable supply chain for workshop use Finished in a blackened finish, the clamp resists wear and offers basic protection against corrosion in typical workshop environments. Built for everyday use, the construction supports long service intervals and predictable performance. Sourcing is supported by Metav’s logistics hub in Emmerich, which acts as a quality filter for the European market and ensures steady availability for industry and trade. This combination of durable design and dependable supply reduces downtime risk and supports continuous production. For dependable high-force clamping with the Kukamet 113, request supply and technical advice from Metav Werkzeuge in Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Model: 113 SKU: B113-4-D-C1 GTIN: 8680731507508 eClass: 21041719 ETIM: EC011973 Facts Clamping force (max): 3,500 N Holding force (max): 3,650 N Arm length: 91 mm Weight: 0.84 kg Angle: 90° Special features Type: horizontal toggle clamp Mounting: angle base Material/finish: blackened finish Massive holding arm Brand: Kukamet FAQ What is the maximum clamping force of the clamp? The maximum clamping force is 3,500 N and the maximum holding force is 3,650 N for the Horizontal clamp 113 (Kukamet, SKU B113-4-D-C1). How is the clamp mounted to a fixture? Mounting is via a 90° angle base, designed for secure fixing to jigs and fixture plates to provide stable workholding. Is the arm suitable for repeated industrial use? Yes. The clamp features a massive holding arm and a durable blackened finish that support repeated cycles in workshop environments. What are the dimensions and weight for layout planning? Arm length is 91 mm and the overall weight is 0.84 kg, which helps when planning compact fixture layouts. Is this a toggle-type clamp suitable for assembly jigs? Yes. The device is a horizontal toggle clamp intended for jigs, fixtures and assembly stations and is supplied under Kukamet SKU B113-4-D-C1. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 91mm Horizontal Clamp With Solid Holding Arm, 3.65kN Holding Force, Galvanised - Kukamet
Take advantage of the massive holding arm, galvanised construction and high clamping ratings to ensure secure, repeatable fixturing. For straightforward integration into benches and jigs, order directly via Metav Werkzeuge or consult the technical team for application advice. Horizontalspanner 113 — Galvanised horizontal clamp with 3650 N holding force (Kukamet) The Horizontalspanner 113 is a galvanised horizontal clamp designed for reliable workholding in industrial fixtures and workshop jigs, fitted with an angle foot for secure mounting at 90°. Massive holding arm Galvanised corrosion resistance 3650 N maximum holding force 91 mm arm length Secure clamping for consistent process results The clamp delivers a high holding force of 3650 N with a maximum applied clamping pressure of 3500 N, providing stable fixation for repeatable machining and assembly tasks. The robust arm geometry, described as a massive holding arm, reduces elastic deflection during loading and thereby contributes to repeatable part positioning. In practical terms, the construction minimises rework and setup time by keeping components immobile under moderate production forces, which benefits both small workshops and shop-floor fixtures. Compact design that simplifies fixture layout A compact footprint and a 91 mm arm length make the device well suited to confined fixturing setups where access and clearances are limited. The integrated angle foot mounting permits a rigid 90° attachment to base plates or tooling plates, enabling fast installation into existing jigs. The galvanised finish offers basic corrosion protection, making the clamp suitable for general workshop environments where occasional exposure to humidity or coolant splash can occur. Robust materials and straightforward maintenance Constructed in galvanised steel and engineered for straightforward mechanical operation, the clamp combines durability with minimal upkeep. The mechanical principle is simple and serviceable: the lever-action design avoids complex internals, allowing visual inspection and basic preventive maintenance without specialised tools. For procurement and inventory management, the unit’s compact weight of 0.84 kg supports easy handling and reduces shipping volume within bulk orders. Select Kukamet quality for dependable fixturing—order the Horizontalspanner 113 via Metav Werkzeuge or contact the Metav team in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for detailed application guidance Technical Data SKU: 113-4-D-C1 GTIN: 8680731500929 Manufacturer: Kukamet Facts Maximum holding force: 3650 N Maximum clamping pressure: 3500 N Arm length: 91 mm Weight: 0.84 kg Angle: 90° eClass: 21041719 ETIM: EC011973 Special features Material: galvanised Mounting: angle foot Massive holding arm Category: spanner FAQ What maximum load can the clamp withstand? The clamp provides a maximum holding force of 3650 N and a maximum clamping pressure of 3500 N for the Horizontalspanner 113 (Kukamet, SKU 113-4-D-C1). Is the unit suitable for workshop environments with occasional moisture? Yes, the galvanised finish on the Horizontalspanner 113 gives basic corrosion resistance suitable for general workshop conditions. How is the clamp mounted to a fixture plate? The clamp is supplied with an angle foot for 90° mounting, enabling rigid attachment to base plates or tooling plates. What are the main benefits of the massive holding arm? The massive holding arm reduces elastic deformation under load, improving positional stability and repeatability during machining and assembly cycles. Can the clamp be used in compact fixture arrangements? With a 91 mm arm length and compact weight, the clamp is designed for integration into confined fixturing layouts where clearance is limited. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 93mm Horizontal Clamp With Solid Holding Arm, 850 N Closing Force, Galvanised - Kukamet
Take advantage of the combination of a zinc-plated finish, a massive holding arm and compact mounting for consistent, repeatable clamping in production. Use the reliable 1000 N holding force and 93 mm arm to improve workpiece stability, and order the horizontal clamp directly via Metav Werkzeuge or ask our consultants for application advice. Horizontal clamp 111 — Kukamet horizontal clamp, zinc-plated, 1000 N holding force A robust Horizontal clamp 111 designed for right‑angle, horizontal mounting in fixtures and jigs, combining compact dimensions with a heavy‑duty holding arm for secure, repeatable workholding. Zinc-plated corrosion resistance 1000 N maximum holding force 93 mm sturdy clamping arm Right-angle horizontal foot mount Secure clamping for reliable machining The clamp delivers a clear technical advantage where process stability matters: 1000 N maximum holding force with a 850 N press rating provides predictable retention in assembly and machining operations. By converting those force figures into secure fixturing, the device reduces vibration and part movement, which in turn lowers scrap rates and rework. The sturdy clamping arm is designed to hold components firmly in place, enabling consistent cycle times and fewer interruptions to production. Compact mount for space-efficient fixtures With a horizontal foot mounting and a fixed 90° orientation, the clamp fits into confined fixture layouts without adding bulk. The 93 mm arm offers reach while the overall mass remains low at 0.134 kg, allowing multiple units to be integrated into modular jigs without overloading the construction. This compact footprint supports denser tooling configurations and helps preserve clearance for tools and handling. Durable finish and workshop-ready design A zinc-plated surface protects the component from corrosion and workshop contaminants, making the clamp suitable for routine industrial use. The massive holding arm and robust construction ensure long service life under regular load cycles, reducing the need for frequent replacement. Clear, standardised dimensions and forces facilitate planning: the clamp is straightforward to specify into drawings and parts lists, supporting efficient sourcing and maintenance planning. For reliable fixturing based on Kukamet’s robust design, contact Metav Werkzeuge for tailored ordering and technical guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration and procurement. Technical data SKU: 111-1-D-C2 GTIN: 8680731505726 Manufacturer: Kukamet Core specifications Arm length: 93 mm Maximum holding force: 1000 N Maximum press force: 850 N Angle: 90° Materials & special features Material: zinc-plated steel Mounting: horizontal foot Massive holding arm eClass: 21041719 ETIM: EC011973 FAQ What is the maximum holding force of this clamp? The clamp achieves a maximum holding force of 1000 N, providing secure retention for typical workshop and light industrial applications. What are the main mounting characteristics? Mounting is via a horizontal foot in a fixed 90° orientation, designed for use in right‑angle fixture assemblies. What is the effective arm length of the clamping arm? The clamping arm measures 93 mm, suitable for many common workpiece sizes and fixture layouts. What material finish is used and how durable is it? The clamp is made of zinc‑plated steel, offering corrosion resistance and robustness for routine shop environments. Which SKU should be referenced when ordering or specifying? Reference SKU 111-1-D-C2 and GTIN 8680731505726 for procurement and documentation Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 93mm Horizontal Clamp, Solid Holding Arm With Safety Lock, 850N Closing Force - Kukamet
Take advantage of the combination of robust holding performance, a compact 93 mm arm and an integrated safety lock to keep fixtures secure and production flowing. Order the clamp directly via Metav Werkzeuge or request advice from our consultants for application-specific guidance. Horizontal clamp 112 — vertical-foot lever clamp with 850 N clamping force (Kukamet) The 112 horizontal clamp is a compact lever clamp designed to provide secure workholding in fixtures and jigs, featuring a vertical mounting foot and a 90° arm for space-efficient positioning. Compact 93 mm holding arm 850 N clamping force rating Integrated safety locking mechanism Vertical foot for stable mounting Durable clamping with defined force for consistent results The robust construction delivers repeatable performance: a 93 mm holding arm combined with a rated clamping force of 850 N and a holding force of 1000 N ensures reliable fixation during machining and assembly. The precise force figures make process planning straightforward and reduce variability in throughput. The compact metalwork is finished in a blackened surface treatment that supports everyday workshop use while maintaining a professional appearance. Space-saving mounting that simplifies fixture design A vertical mounting foot reduces the clamp’s footprint on tooling plates and allows integration into tight fixture layouts. The 90° arm orientation offers a low-profile clamping direction ideal for assemblies with limited vertical clearance. With a mass of just 0.1 kg, the unit adds minimal inertia to moving assemblies and can be positioned in multiples without significantly increasing load on the base structure. Safe operation and quick handling for production environments The clamp is fitted with a safety lock and a solid holding arm, which prevent unintentional release during handling or vibration. The lever mechanism provides a clear mechanical advantage, enabling fast engagement and disengagement while maintaining a secure hold. This reduces cycle times at manual stations and supports consistent operator procedures in repetitive tasks. Practical suitability across workshop and light industrial applications Designed for general shop fitting and small-series production, the clamp suits jigs, assembly stations and inspection fixtures where a compact, dependable solution is required. The straightforward mechanical design minimises maintenance needs and allows straightforward replacement if layouts change. Supplied under the Kukamet line and identified as SKU B112-1-D-L-C2, the device integrates easily into modular clamping systems and tooling benches. Contact Metav Werkzeuge today for tailored advice on integrating the Kukamet horizontal clamp into fixtures, or request an application checklist from our consultants to ensure the best fit for production needs. Technical data Article number: B112-1-D-L-C2 Manufacturer: Kukamet Facts Arm length: 93 mm Angle: 90° Clamping force: 850 N Holding force: 1000 N Weight: 0.1 kg eClass: 21041719 ETIM: EC011973 Special features Finish: blackened/brunished Mounting: vertical foot Safety: integrated safety lock Design: solid holding arm Type: horizontal lever clamp FAQ What clamping and holding forces does the clamp provide? The clamp offers a rated clamping force of 850 N and a holding force of 1000 N, allowing planners to calculate fixture loads and safety margins with the Kukamet horizontal clamp. How is the clamp mounted in a fixture? Mounting is via a vertical foot, enabling compact installation on tooling plates and in confined fixture geometries while keeping the 90° arm orientation. Is the clamp suitable for automated stations? The mechanical lever and safety lock make the unit suitable for low-cycle automated or semi-automated operations where a reliable mechanical hold is required. What finish and durability can be expected? The clamp is supplied with a blackened/brunished surface finish that provides basic corrosion protection and a durable appearance for workshop use. How is the clamp identified for ordering or spare parts? The Kukamet horizontal clamp is listed under SKU B112-1-D-L-C2 for clear identification in procurement and spare-part planning. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 93mm Horizontal Clamp, Solid Holding Arm, 850N Closing Force, 1000N Holding Force, Blackened - Kukamet
Take advantage of the 112 horizontal clamp's combination of a 1,000 N holding force, a massive holding arm and a compact 93 mm reach for secure, repeatable fixturing. Order directly via Metav Werkzeuge or ask our consultants for configuration and delivery from Emmerich. Kukamet 112 Horizontal clamp — 1,000 N holding force, 93 mm arm Kukamet 112 Horizontal clamp designed as a robust 90° toggle clamp for jigs, fixtures and light‑assembly tasks where repeatable, secure holding is required Massive holding arm for rigid clamping Vertical-foot mount for stable attachment 1,000 N holding force at 90° clamp Consistent, measurable clamping performance With a rated holding force of 1,000 N and a maximum actuation force of 850 N, this horizontal toggle clamp delivers predictable retention for short‑run assembly and prototyping tasks. The force ratings are useful when planning fixture layouts or when comparing clamping solutions: the numerical values enable straightforward selection for parts that require defined clamping pressure. The device’s repeatable action reduces repositioning and inspection time, supporting efficient production cycles. Robust construction for workshop conditions The clamping mechanism incorporates a massive holding arm and a blackened finish, combining mechanical stiffness with improved surface protection. A 93 mm arm provides a practical lever length for most light‑duty fixtures while the vertical‑foot mount enables a compact attachment to plates or bases. At just 0.136 kg, the component adds negligible mass to assemblies yet contributes significant structural stability where it is fitted. Easy integration into existing jigs and fixtures Engineered as a horizontal toggle clamp, the product slips into established clamping patterns without complex modifications. The 90° clamp angle suits right‑angle seating and edge fixation, and the clamp’s simple mounting arrangement allows quick positioning in modular setups. For questions about fixing dimensions or to check compatibility with specific fixtures, technical advice is available to ensure smooth integration. Low-maintenance operation and reliable supply chain The mechanical design is intentionally straightforward to limit wear and simplify periodic checks; fewer moving parts and the sturdy holding arm reduce maintenance intervals. Metav’s role as a precision supplier adds procurement confidence: stock and quality control from Emmerich support timely delivery and consistent product standards across batches. Discuss the Kukamet 112 horizontal clamp with Metav Werkzeuge to confirm suitability for specific fixtures and to arrange delivery from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: B112-1-D-C2 GTIN: 8680731507140 Manufacturer: Kukamet ECLASS: 21041719 ETIM: EC011973 Core data Holding force: 1,000 N Maximum actuation force: 850 N Arm length: 93 mm Clamp angle: 90° Weight: 0.136 kg Features Horizontal toggle clamp Vertical-foot mounting Massive holding arm Blackened finish 90° clamping action FAQ What is the maximum holding force of the clamp? The Kukamet 112 horizontal clamp provides a holding force of up to 1,000 N (SKU B112-1-D-C2), a specification intended for planning fixture retention and comparative selection. How is the clamp mounted? The device uses a vertical‑foot mount that allows stable attachment to fixture plates or baseplates; the mounting arrangement suits compact layouts and straightforward bolting. What protective finish does the clamp have? The clamp is supplied with a blackened finish, offering improved surface protection compared with untreated steel and helping to reduce the visibility of minor wear. What are the key dimensions to consider when integrating this clamp? Key values are a 93 mm arm length and a 90° clamping angle; the weight is approximately 0.136 kg. These figures help determine clearance and lever geometry in a fixture. Is this a toggle clamp or a different clamping type? This is a horizontal toggle clamp (lever‑actuated), designed to provide quick, repeatable 90° clamping suitable for jigs and light assembly operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 1000 N Clamping Force, Massive Holding Arm, Vertical Base, Blackened Finish - Kukamet
The robust combination of a massive holding arm, a 166 mm reach and a holding force of 1,200 N ensures secure, repeatable clamping for everyday workshop tasks. Benefit from a compact, light design that supports efficient setup and fast cycle times. Order the Horizontal clamp 112 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 112 — horizontal clamp with 166 mm arm and 1,200 N holding force (Kukamet) A Horizontal clamp 112 designed for secure horizontal clamping in workshop and light industrial applications, featuring a solid holding arm and vertical base for stable mounting. Massive holding arm for robust clamping 166 mm arm length for extended reach Holding force up to 1,200 N Vertical base for straightforward mounting Reliable clamping performance for consistent production The clamp delivers high holding force with a maximum holding capacity of 1,200 N, combined with a defined pressing force of 1,000 N to secure workpieces during machining or assembly. The solid construction minimises flex under load, which reduces rework by stabilising parts during operations. Designed for repetitive use, the device supports accurate positioning at a fixed right angle (90°) and helps maintain consistent process quality across runs, translating into predictable throughput and reduced downtime. Compact design that simplifies workstation integration With a reach of 166 mm and a weight of just 0.254 kg, the unit integrates easily into crowded fixtures and reduces added mass on assemblies. The vertical base mounting allows for straightforward attachment to plates or tooling blocks, speeding up fixture set-up and changeover times. A dark, blackened finish provides corrosion-resistant protection while remaining unobtrusive in the work environment. These attributes make the clamp suitable where space is at a premium but reliable clamping is essential. Broad applicability and dependable construction Intended for general clamping tasks, the component performs well across routine workshop applications where a durable toggle-style horizontal clamp is required. The massive holding arm improves resistance to lateral forces, supporting machining, inspection and light assembly tasks. Built for endurance, the item is a practical choice for engineers and toolroom staff seeking a balance of strength, reach and compactness without unnecessary complexity. For tailored advice on integrating the Kukamet Horizontal clamp 112 into existing fixtures, contact Metav Werkzeuge for practical recommendations and delivery options Technical data SKU: B112-2-D-C3 GTIN: 8680731507201 Name: Horizontal clamp 112 Brand: Kukamet Facts Arm length: 166 mm Holding force: 1,200 N Pressing force: 1,000 N Weight: 0.254 kg Angle: 90° eCl@ss: 21041719 ETIM: EC011973 Special features Vertical base mounting Massive holding arm Blackened (blued) finish Compact, lightweight design FAQ What maximum holding force does the clamp provide? The Kukamet Horizontal clamp 112 offers a maximum holding force of 1,200 N, enabling secure fixation of workpieces during machining and assembly. Can the clamp be mounted directly to a tooling plate? Yes, the clamp uses a vertical base mounting that allows direct attachment to tooling plates or fixture blocks for stable integration in jigs and fixtures. Is the arm length suitable for extended reach applications? The 166 mm arm length provides extended reach for many standard workstation setups while maintaining a compact footprint for versatile positioning. What finish protects the clamp against corrosion? The component is supplied with a blackened (blued) finish that offers corrosion resistance suitable for typical workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 110mm Arm Massive Holding Arm, 1,000N Press Force, 1,200N Hold Force - Kukamet
Take advantage of a compact, heavy-duty lever clamp that combines a 110 mm solid holding arm with a maximum holding force of 1,200 N and 90° angle-foot mounting for secure, repeatable workholding. Order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. Horizontal clamp 113 — Lever clamp with 110 mm arm and 1,200 N holding force by Kukamet Horizontal clamp 113 is a workshop-grade lever clamp intended for fixed 90° configurations where stable, repeatable clamping is required Solid 110 mm holding arm 1,200 N maximum holding force 90° angle-foot mounting Black burnished finish Consistent clamping performance reduces rework and cycle time The clamp delivers a maximum holding force of 1,200 N and a pressing capability of 1,000 N, a combination that provides reliable fixation for a wide range of machining and assembly tasks. The lever mechanism converts operator input into a high, repeatable clamping output, ensuring parts remain stationary during cutting or inspection. This performance reduces the risk of workpiece movement, lowering scrap rates and saving time on rework. The compact geometry and 110 mm arm length balance reach and rigidity, making the device suitable for fixtures where space is limited but secure retention is essential. Simple integration with angle-foot mounting for stable set-ups Fitted with an angle foot for right-angle attachment, the clamp is intended for permanent or semi-permanent fixture installation. The 90° mounting orientation facilitates quick alignment on vertical or horizontal plates and supports straightforward positioning within a jig or machine table. The mounting style minimises assembly steps and supports consistent repeatability in production environments. Where fixture space and repeat accuracy matter, this design reduces set-up time and contributes to a more efficient workflow. Durable design with low maintenance for everyday workshop use Finished in a black burnished surface and featuring a solid holding arm, the clamp resists wear in demanding environments while retaining smooth lever action. The compact unit weighs approximately 0.282 kg, offering a high strength-to-weight ratio that eases handling during fixture assembly without compromising robustness. The corrosion-resistant finish provides basic environmental protection, and the simple mechanical construction allows straightforward inspection and replacement of wear components, supporting long-term uptime with minimal maintenance. For robust, repeatable clamping choose the Kukamet Horizontal clamp 113 — contact Metav Werkzeuge in Emmerich for ordering and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: B113-2-D-C2 GTIN: 8680731507416 Category: Spanner ECLASS: 21041719 ETIM: EC011973 Measured values Arm length: 110 mm Maximum holding force: 1,200 N Maximum pressing force: 1,000 N Angle: 90° Weight: 0.282 kg Materials & features Finish: black burnished Mounting type: angle foot Design: lever clamp with solid holding arm Robust holding arm: yes FAQ What is the primary application of this clamp? The Horizontal clamp 113 by Kukamet is designed for fixed 90° fixture applications where secure, repeatable clamping is required, for machining, assembly and inspection set-ups. How much clamping force does the unit provide? The lever clamp offers a maximum holding force of 1,200 N and a pressing force rating of 1,000 N, giving dependable retention for medium-duty workshop tasks. How is the clamp mounted to a fixture or plate? Mounting is via an angle foot at 90°, enabling attachment to vertical or horizontal plates for stable fixture integration. Is the clamp suitable for heavy-duty industrial use? With a solid holding arm and a black burnished finish, the clamp is intended for daily workshop use and provides durable performance in production environments. What are the key dimensions to consider when integrating the clamp? Key dimensions are the 110 mm arm length, the unit weight of 0.282 kg and the 90° mounting angle; these govern reach, mass, and mounting orientation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 117mm Arm Massive Hold Arm With Safety Lock, 4.5kN Thrust - Kukamet
Take advantage of a combination of robust construction, measurable holding and clamping forces, and compact weight for reliable fixturing in production environments; order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. Horizontal clamp 113 — horizontal toggle clamp with 90° angled foot and massive holding arm (Kukamet) The Horizontal clamp 113 is a lever-operated horizontal clamp designed for secure 90° fixtures in machining and assembly applications. Massive holding arm with safety lock 90° angled foot mounting Holding force up to 5,000 N Compact 1.84 kg robust design Secure, repeatable clamping for production workflows The horizontal toggle design provides a consistent clamping force and a short actuation path, ensuring parts are held reliably during machining or assembly. With a measured holding force of 5,000 N and a clamping force of 4,500 N, the device enables predictable fixture behaviour that benefits process planning and reduces rework. The lever mechanism converts manual input into reliable restraint, supporting both short-cycle production and occasional set-up tasks while maintaining positional stability. Built for workshop durability and safety A massive holding arm combined with an integrated safety locking mechanism reduces the risk of accidental release and extends the useful life under frequent use. The component is finished in a blackened finish that offers surface protection against everyday wear and supports corrosion resistance in standard workshop environments. The compact construction at 1.84 kg minimises added mass on fixtures while still delivering robust performance, which helps protect jigs and machine tables from unnecessary loading. Quick installation and versatile mounting options Fitted with an angled foot for 90° mounting, the clamp simplifies alignment on frames, fixtures and assembly jigs, enabling fast integration into existing setups. The straightforward mechanical attachment reduces set-up time and allows for repeatable repositioning. The simple lever action and safety latch make the clamp suitable for both skilled operators and production staff who require rapid, reliable clamping without complex adjustment. Where precision fixturing is required, the compact form factor and clear mechanical parameters support predictable results. For tailored advice on integrating the Kukamet horizontal clamp 113 into production fixtures or to reserve stock for an upcoming project, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical data Article number: B113-5-D-L-C1 ECLASS: 21041719 ETIM: EC011973 Manufacturer: Kukamet Facts Arm length: 117 mm Clamping force (max): 4,500 N Holding force (max): 5,000 N Weight: 1.84 kg Angle: 90° Special features Mounting: angled foot Massive holding arm Safety locking mechanism Finish: blackened Category: Horizontal clamp FAQ What materials can be clamped with this device? The Kukamet horizontal clamp 113 is a mechanical clamping device suitable for general fixturing of metal and non-critical composite components; material-specific cutting or machining limits depend on the overall fixture and process. How is the clamp mounted to a fixture? Mounting is via the angled foot at 90°, allowing secure attachment to plates or frames; the 90° foot simplifies alignment on standard fixtures. What forces can be expected during operation? The clamp provides a clamping force of up to 4,500 N and a holding force of up to 5,000 N, values that define usable limits for secure fixturing in many workshop processes. Is there a safety feature to prevent accidental release? Yes, the unit includes a safety locking mechanism and a massive holding arm to reduce the risk of unintentional opening under load. What is the product’s weight and how does that affect fixtures? The clamp weighs 1.84 kg, offering a balance between robustness and low added mass for versatile fixture design. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 117mm Massive Holding Arm 5,000 N Holding Force, 4,500 N Closing Force - Kukamet
Combine a robust holding arm, high clamping forces and a compact 90° angle base to secure jigs and fixtures with confidence; benefit from straightforward integration, long service life and reliable repeatability. Order the clamp directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 113 — Kukamet horizontal toggle clamp, 5,000 N holding force, 90° angle base A Horizontal clamp 113 designed for secure horizontal clamping in jigs, fixtures and assembly applications, featuring a sturdy arm and compact angled mounting for space-efficient installation 90° locking angle for consistent positioning Robust holding arm for heavy-duty use Up to 5,000 N holding force 117 mm arm length for extended reach Blackened finish for corrosion resistance Reliable clamping performance that supports throughput The clamp delivers consistent holding force and rapid actuation for repetitive production tasks. With a rated holding force of 5,000 N and a maximum applied pressure of 4,500 N, the device ensures secure fixation of workpieces during machining, welding or assembly. The combination of measured clamping values and a substantial arm length of 117 mm reduces the need for repeated adjustments and supports higher machine utilisation. These quantifiable strengths translate directly into less rework and improved process stability. Simple integration into existing fixtures and jigs Engineered for quick installation, the unit uses an angle base that fixes at a 90° locking angle, enabling straightforward mounting on benches, plates or fixture plates. The compact footprint and standard fixing geometry make retrofit into existing tooling simple, reducing downtime during changeovers. The toggling mechanism provides rapid open/close cycles, which benefits automated sequences or manual operations that require frequent clamping and unclamping. Durability and serviceability for daily workshop use Constructed with a massive holding arm and a blackened finish, this clamp resists wear and minor corrosion while maintaining alignment under load. The robust design minimises deformation risk and supports steady repeatability over prolonged use. Where occasional maintenance is required, the straightforward mechanical layout keeps servicing and replacement of wearable parts efficient, helping to preserve uptime and reduce total cost of ownership. Procurement advantage and confidence from a trusted supplier Sourcing the clamp via Metav provides more than a single item: it connects procurement to a curated supply chain with comprehensive stock and technical filtering in Emmerich. Metav’s broad range and long-standing market presence bring transparency to delivery and specification matching, which is particularly valuable for small and mid-size workshops seeking industrial-grade clamping technology without compromising on quality or supply reliability. Contact Metav Werkzeuge for detailed ordering information and expert advice on integration and delivery for the Kukamet Horizontal clamp 113 Technical Data SKU: B113-5-D-C1 GTIN: 8680731507553 Brand: Kukamet Weight: 1.705 kg Facts Arm length: 117 mm Holding force: 5,000 N Maximum applied pressure: 4,500 N Locking angle: 90° Special features Angle base mounting (Winkelfuß) Massive holding arm Blackened finish (Schwarz brüniert) Category: Toggle clamp / Horizontal clamp FAQ What is the maximum holding force of this clamp? The clamp achieves a maximum holding force of 5,000 N, providing secure fixation for a wide range of workshop applications. Is the clamp suitable for fixture plates and jig systems? Yes, the 90° angle base and compact design make it suitable for integration into fixture plates and jig systems where horizontal clamping is required. What is the arm reach and how does it affect clamping range? The arm length is 117 mm; this extended reach permits clamping of larger or offset workpieces while maintaining stable hold-down force. Which finish is applied and what are the benefits? A blackened finish reduces the risk of surface corrosion and improves wear resistance, supporting longevity in workshop environments. Who manufactures this clamp and what is the SKU? The clamp is manufactured by Kukamet and is listed under SKU B113-5-D-C1 for clear identification in procurement. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 118mm Arm, Massive Clamp Arm & Safety Lock, 2.3kN Pressure, Blackened Finish - Kukamet
Take advantage of a compact fixture clamp that combines up to 2,500 N holding force, a massive holding arm with safety lock, and a vertical-foot mounting for straightforward integration into production jigs. Order the clamp via Metav Werkzeuge or consult our advisors for installation and application guidance. Horizontal clamp 112 by Kukamet — robust horizontal lever clamp with safety lock The Horizontal clamp 112 is a compact horizontal lever clamp designed for reliable workholding in jigs, fixtures and general assembly operations, combining high clamping forces with a space-saving vertical-foot mount Robust holding arm with safety lock Up to 2,500 N clamping force Vertical-foot mount, 90° position Consistent clamping power for repeatable results The clamp delivers a measurable clamping performance with a maximum holding force of 2,500 N and a maximum pressing force of 2,300 N, values that translate directly into more reliable fixtures and fewer rework cycles. Measurable figures such as these support efficient process planning and reduce variance between parts; the repeatability of the clamp helps maintain tolerances across batch runs. For production environments where cycle stability matters, the quantifiable forces provide a sound basis for fixture design and risk assessment. Small footprint, easy integration into jigs and fixtures With an 118 mm arm and a total mass of just 0.3 kg, the design is optimised for confined assemblies and compact stations. The vertical-foot mounting and fixed 90° orientation enable direct bolting to plates and subplates without elaborate adapters, saving assembly time and simplifying retrofit to existing tooling. The compact dimensions reduce shadowing and interference in multi-clamp fixtures, allowing closer spacing of clamping points and consequently improving part support and machining access. Safety and durability tailored to everyday workshop use A massive holding arm combined with an integrated safety locking mechanism reduces the risk of unexpected release during handling and machining, increasing operator confidence on the shop floor. The component is finished in a blackened blued surface that helps resist corrosion and wear in general industrial environments. Durable construction and straightforward mechanical design mean predictable maintenance intervals and easy replacement of consumables, supporting continuous operation in small-series production and repair work. Choose the Kukamet horizontal clamp 112 for robust, compact workholding — contact Metav Werkzeuge for product availability and application advice from Emmerich. Technical data SKU: B112-3-D-L-C2 Product name: Horizontal clamp 112 Manufacturer: Kukamet Facts Arm length: 118 mm Maximum press force: 2,300 N Maximum holding force: 2,500 N Angle: 90° Weight: 0.3 kg eCl@ss: 21041719 ETIM: EC011973 Special features Vertical-foot mounting (senkrechter Fuß) Massive holding arm and safety locking mechanism Blackened blued finish Category: Clamping devices / Spanner FAQ What clamping forces can be expected from this clamp? The Kukamet horizontal clamp 112 specifies a maximum holding force of 2,500 N and a pressing force of 2,300 N, values that are useful for fixture design and force calculations. Is the clamp suitable for tight jigs and close spacing? Yes, the compact design with an 118 mm arm and a vertical-foot mount makes the clamp well suited to confined jigs and fixtures. Does the clamp include a locking feature for safety? The clamp is equipped with a safety locking mechanism and a masssive holding arm to prevent accidental release during handling or machining. What surface protection does the clamp have? The component is supplied with a blackened blued finish, which provides basic corrosion resistance and a robust surface for workshop use. Can this clamp be mounted directly to plates without adapters? The vertical-foot mounting and 90° orientation are designed for direct bolting to mounting plates and subplates, simplifying integration into existing tooling layouts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 129mm Arm, 5,000 N Holding Force, Solid Arm With Safety Lock - Kukamet
Benefit from a robust combination of high clamping force, a massive holding arm and simple fixture integration for consistent, repeatable production. Take advantage of the 129 mm reach and the reliable safety lock to reduce setup time and secure workpieces. Order the Kukamet Horizontal clamp 111 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp »111« – Horizontal toggle clamp with 129 mm arm, Kukamet A 111 horizontal toggle clamp designed for secure workpiece holding in jigs, fixtures and workshop assemblies. 129 mm arm for extended reach Horizontal foot mounting for fixture integration Massive holding arm with safety lock Clamping force up to 4,500 N Secure clamping power for repeatable production results The clamp provides a clear technical advantage through its 4,500 N maximum clamping force and 5,000 N maximum holding force, which together ensure that components remain fixed under load during machining or assembly. High holding and clamping values translate into improved process stability and fewer reworks; in practical terms, fixtures experience less movement and tolerances are maintained. The reliable mechanical action of the device supports consistent cycle times and predictable outcomes for production runs. Robust construction and straightforward fixture integration Constructed with a massive holding arm and a blackened finish, the unit is engineered for durability in workshop environments. The horizontal foot mounting and a 90° lever angle simplify integration into existing jigs and clamping plates, while the 129 mm arm offers extended reach for larger or irregular workpieces. At 1.4 kg, the clamp combines solidity with manageable mass, making installation and replacement straightforward. The built form and finish reduce the need for frequent replacements and support long service life under regular use. Safer operation and traceable specification for procurement Safety is addressed by the integrated safety lock, which prevents accidental opening during handling or vibration-prone processes. The device’s design as a horizontal toggle clamp allows quick manual actuation while maintaining a locked state under load, reducing downtime from unintended releases. For ordering and documentation the SKU: B111-5-D-L-C1 provides an exact reference, ensuring the correct component is specified for fixtures and assembly equipment. The combination of mechanical reliability and clear product reference supports both purchasing and quality assurance routines. Secure your fixtures with Kukamet reliability — contact Metav Werkzeuge for specialist advice and procurement support at info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: B111-5-D-L-C1 Designation: Horizontal clamp "111" Manufacturer: Kukamet Facts Arm length: 129 mm Clamping force (max): 4,500 N Holding force (max): 5,000 N Weight: 1.4 kg Angle: 90° Special features Massive holding arm Safety lock Horizontal foot mounting Finish: blackened FAQ What clamping and holding forces does the clamp provide? The Kukamet horizontal clamp 111 delivers a maximum clamping force of 4,500 N and a maximum holding force of 5,000 N, providing secure fixation for many jig and fixture applications. Can the clamp be mounted to existing fixture plates? Yes, the clamp is supplied with a horizontal foot mounting designed for straightforward integration into fixture plates and jigs in workshop assemblies. How does the safety lock improve operation? The built-in safety lock on the 111 prevents unintentional release of the lever under vibration or handling, ensuring the workpiece remains secured until deliberately unlocked. Is the arm length suitable for larger workpieces? With a 129 mm arm, the clamp gives extended reach compared with compact variants, making it practical for a wide range of component sizes within fixture systems. What reference should be used when ordering this clamp? Use SKU B111-5-D-L-C1 and the designation Horizontal clamp "111" by Kukamet to ensure the correct item is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 129mm Massive Holding Arm 5,000N Holding Force, Blackened Finish - Kukamet
Robust construction with a massive holding arm, a 129 mm reach and up to 5,000 N holding force delivers consistent, repeatable clamping for small-batch and workshop production; order the Kukamet Horizontal clamp 112 directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal clamp 112 — Kukamet lever clamp with vertical foot and 129 mm reach A Horizontal clamp 112 designed as a lever-operated workholding solution for metalworking and general workshop applications, providing secure, fast clamping where repeatability and space-saving mounting are required Vertical base for stable mounting Massive holding arm 129 mm arm length for extended reach Up to 5,000 N holding force Reliable clamping that keeps production moving The design focuses on measurable performance: a 5,000 N holding force combined with a massive holding arm reduces part movement under load and maintains positional accuracy across repeated cycles. The robust construction minimises elastic deformation during clamping, which contributes directly to shorter setup times and fewer rejected parts. For production environments where consistent grip and repeatability are critical, this configuration supports reliable process control and less rework. Fast lever action for efficient cycles A lever-operated concept with a defined 90° angle enables rapid engagement and release, giving practical gains in cycle time without complex mechanisms. The unit provides a 4,500 N clamping force under dynamic operation, which is sufficient for many workshop fixtures and jig applications. The simple mechanical action is easy to integrate into fixtures or manual workflows, offering clear efficiency benefits through straightforward handling and lower actuation effort compared with bulkier systems. Compact, corrosion-resistant finish for workshop resilience Finished in a blackened finish, the clamp resists surface corrosion and handles everyday workshop conditions with reduced maintenance requirements. With a reach of 129 mm and a compact mass of 1.385 kg, the component is easy to position and mount while still providing substantial holding capability. The combination of compact footprint and durable surface treatment supports flexible placement on benches or fixtures, preserving workspace while prolonging service life. Practical applications and mounting advantages Engineered for bench and fixture installation, the vertical foot mounting simplifies attachment and alignment on machine tables or dedicated jigs. The lever clamp format suits repetitive assembly operations, clamping for machining setups and fixture-based inspection tasks. The defined lever geometry and sturdy arm reduce the need for frequent adjustments, supporting faster changeovers and consistent part handling in mixed-production environments. Contact Metav Werkzeuge for application-specific recommendations and supply from Emmerich — Tel +49 2822 7131930 or e-mail info@metav-werkzeuge.com Technical data SKU: B112-5-D-C1 GTIN: 8680731507331 Manufacturer: Kukamet Facts Arm length: 129 mm Holding force: 5,000 N Max clamping force: 4,500 N Weight: 1.385 kg Angle: 90° Special features Vertical foot mounting Massive holding arm Blackened finish Lever clamp design FAQ What materials is the clamp suitable for? The Kukamet Horizontal clamp 112 is suitable for general workshop applications and provides secure clamping for common machinable materials; selection should be matched to the fixture and process requirements. How is the clamp mounted? Mounting is by the vertical foot; the design facilitates direct bench or fixture attachment and fixed alignment at a 90° lever position for reliable operation. What forces can be expected during use? The device offers a holding force of up to 5,000 N and a maximum clamping force of 4,500 N, which supports secure positioning in many metalworking and assembly tasks. Which feature reduces corrosion in workshop environments? The blackened finish on the Horizontal clamp 112 provides surface protection that lessens corrosion risk and reduces routine maintenance demands. Is the arm length suitable for reach-critical fixtures? With a 129 mm arm length, the clamp balances reach and compactness, making it appropriate for fixtures where extended reach is needed without sacrificing rigidity. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 141mm Arm, Massive Holding Arm & Safety Lock, 3.65kN Hold Force - Kukamet
Combine a high clamping performance with a compact, lightweight design for secure and versatile fixture use; the robust holding arm and safety lock ensure reliable repeatability under production conditions. Purchase the clamp through Metav Werkzeuge or contact the technical advisers for specification support. Horizontal clamp 113 — Kukamet horizontal toggle clamp with 3,650 N holding force The Horizontal clamp 113 is a horizontal toggle clamp designed for secure workpiece retention in jigs and fixtures, offering a 90° clamping orientation and a compact 141 mm arm. Robust holding arm with safety lock 3650 N maximum holding force 90° horizontal clamping angle Blackened finish, weight 0.94 kg Secure, measurable clamping performance for production The horizontal toggle clamp delivers 3650 N holding force, translating technical specification into tangible benefit: consistent, high-clamp retention that reduces slippage and part movement during machining or assembly. The 90° clamping geometry supports right-angle fixtures and repeatable positioning, while the 141 mm arm gives sufficient reach in compact jigs. Specified forces are measured values that allow planners to calculate clamping margins and ensure process safety, so the component selection can be integrated into existing fixture designs with predictable results. Space-saving construction that speeds up workflow A 0.94 kg body and blackened finish make the device suitable for dense fixture layouts where weight and surface treatment matter. The lightweight construction simplifies retrofitting of stations and reduces load on moving fixtures, while the protective finish helps resist wear in workshop environments. The angle-foot mounting provides a stable base for bench or plate installation and enables fast repositioning of clamps without complex substructure changes. These features together shorten set-up times and support higher throughput on small- to medium-scale production runs. Durable mechanism designed for repeatability and safety With a 3,500 N pressing force rating and a safety lock, the clamp converts mechanical input into reliable retention while guarding against accidental release during handling. The massive holding arm and locking function extend service intervals by reducing micro-movements that accelerate wear, which supports predictable maintenance planning and minimises unscheduled downtime. The mechanism’s repeatability contributes directly to process quality: fewer adjustments, less rework and improved part consistency across batches. Practical integration for fixture and jig applications The clamp is intended for fixture and jig use where a horizontal toggle clamp is required; its compact footprint and angle-foot fixing allow integration into modular tooling plates and bespoke assemblies. The device’s mechanical characteristics suit a range of production tasks where right-angle retention and a secure lock are priorities. For technical planning, the SKU B113-4-D-L-C2 and the declared specifications are suitable inputs for CAD layouts and parts lists when preparing workholding equipment. Purchase the Kukamet Horizontal clamp 113 via Metav Werkzeuge for dependable fixture clamping; contact Metav Werkzeuge in Emmerich for application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: B113-4-D-L-C2 Name: Horizontal clamp 113 eClass: 21041719 ETIM: EC011973 Numbers Max holding force: 3650 N Max pressing force: 3500 N Arm length: 141 mm Clamping angle: 90° Weight: 0.94 kg Special features Robust holding arm Safety locking mechanism Blackened finish Angle-foot mounting Horizontal toggle clamp design FAQ What is the maximum holding force of this clamp? The Kukamet Horizontal clamp 113 provides a maximum holding force of 3650 N, allowing planners to calculate secure clamping margins for fixture design. Can the clamp be mounted on a plate or bench? Yes. Angle-foot mounting is specified for straightforward plate or bench installation and supports integration into modular tooling systems. Is there a locking mechanism for added safety? A safety locking mechanism is included; the lock maintains the clamping position and reduces the risk of accidental release during handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 143mm Massive Holding Arm Zinc‑Plated, 850 N Press Force 1000 N Hold Force - Kukamet
Take advantage of a compact, reliable clamping solution that combines a massive holding arm with zinc-plated durability and measured clamping performance for consistent fixture results — order directly via Metav Werkzeuge or consult the technical team for application advice. Horizontal clamp 112 by Kukamet — massive holding arm, zinc-plated finish A Horizontal clamp 112 designed for 90° clamping in fixtures and workholding, offering a sturdy vertical-foot mounting for jigs and repeatable production tasks. Massive holding arm for stable clamping Zinc-plated finish for corrosion resistance 143 mm arm for extended reach Clamping force 1000 N for reliable hold Closing force 850 N for secure pressure Consistent, measurable holding performance for production use The clamp delivers defined forces that simplify process design: a clamping force of 1000 N combined with a closing force of 850 N ensures repeatable retention without excessive over‑stress on components. The robust design with a massive holding arm reduces elastic deformation at the contact point, which in turn lowers scrap rates and minimises setup checks. Where reliable part retention is crucial for machining or assembly, this unit provides quantifiable performance that supports productivity and quality-control routines. Durable finish and compact handling for workshop longevity A zinc-plated surface treatment provides corrosion resistance for harsh workshop environments, while the overall weight of 0.155 kg keeps the clamp easy to position during jig assembly. The combination of a protective coating and a compact mass means longer service intervals under standard shop conditions and straightforward replacement when required. This durability translates into lower lifecycle disruption and reduced maintenance planning compared with untreated alternatives. Designed for flexible integration into fixtures and jigs The clamp features a 143 mm arm and a fixed 90° clamping orientation, together with a vertical foot mounting option that simplifies incorporation into bespoke fixtures or modular tooling plates. The straight‑forward geometry enables precise positioning and repeatable motion paths, supporting efficient setup times and improved throughput. Where tooling space is limited, the reach and orientation of the arm help maintain access to the workpiece while delivering the necessary holding action. Procurement and workshop advantages grounded in supply reliability Supplied by Kukamet and distributed via Metav Werkzeuge, this clamp aligns with a sourcing strategy that favours dependable availability and consistent quality. Choosing a component with documented mechanical data and a corrosion‑resistant finish reduces the need for frequent checks and replacement, supporting lean inventory policies and steady production flow. The product’s clear specifications make it suitable for inclusion in procurement lists where technical comparability and supplier traceability are required. Contact Metav Werkzeuge for stock confirmation and application guidance—call +49 2822 7131930 or email info@metav-werkzeuge.com to request the Kukamet Horizontal clamp 112 (SKU 112-1-D-C3) and technical documentation Technical data SKU: 112-1-D-C3 GTIN: 8680731505627 Manufacturer: Kukamet eClass: 21041719 ETIM: EC011973 Facts Arm length: 143 mm Angle: 90° Clamping force: 1000 N Pressing force: 850 N Weight: 0.155 kg Special features Zinc-plated finish Massive holding arm Vertical foot mounting Lever-clamp design Category: Clamps FAQ What is the maximum clamping force of the clamp? The clamping force is 1000 N; the Kukamet Horizontal clamp 112 is specified with this retention capacity for reliable workholding. How is the clamp mounted in a fixture? Mounting is by a vertical foot; the clamp is intended for secure attachment to jig plates or fixture bases in a vertical‑foot arrangement. Is the surface treated for corrosion resistance? Yes, the clamp has a zinc‑plated finish that improves resistance to corrosion in standard workshop environments. What reach does the clamp arm provide? The arm reach is 143 mm, offering extended access for components in confined or crowded tooling layouts. Which applications are suited to this clamp model? The design suits jigs, fixtures and repetitive production tasks where a defined 90° clamping action and measured forces are required; refer to SKU 112-1-D-C3 for ordering and specification checks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 158mm Arm Massive Holding Arm Zinc Coated 2.3kN Closing Force, 2.5kN Holding Force - Kukamet
Benefit from the combination of a galvanised construction, a massive holding arm and a high 2,300 N closing force to keep fixtures secure and repeatable in daily production. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. 113 Horizontal toggle clamp by Kukamet — 2,300 N closing force, 90° angle The 113 horizontal toggle clamp is a right‑angle lever clamp designed for fixture and jig applications where secure, repeatable clamping at a 90° orientation is required Robust galvanised steel construction Massive holding arm for secure clamping 2,300 N closing force, 2,500 N holding force 90° angle base for right-angle fixtures Dependable force for repetitive fixture tasks The toggle clamp delivers a controlled 2,300 N closing force with a maximum holding force of 2,500 N, making it suitable for repetitive production sequences where consistent pressure is essential. The combination of a massive holding arm and a lever mechanism ensures minimal loss of clamping power over repeated cycles, which reduces rework and machine downtime. Specified values give planners a verifiable basis for fixture design and enable comparison with alternative clamping elements. Space-saving, corrosion-resistant construction for workshop use A galvanised finish and a compact footprint make the component suitable for busy benches and jig assemblies where corrosion resistance and mounting flexibility matter. The angle foot mounting permits right-angle attachment to fixture plates, while the comparatively light 0.432 kg mass simplifies integration without a heavy load on the substructure. The 158 mm reach of the arm provides practical clearance for common workpiece sizes while keeping the overall profile compact. Fast action and repeatability that save setup time The lever clamp mechanism offers rapid operation and reliable repeatability during batch operations and manual assembly steps. Quick clamp/unclamp sequences speed up cycle times on assembly lines and simplify changeovers in modular fixture systems. The sturdy design and precise kinematics contribute to predictable clamping behaviour, which supports consistent quality in downstream processes and reduces inspection effort. For application advice or to request supply of the Kukamet 113 horizontal toggle clamp, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide pragmatic guidance for fixture integration and procurement. Technical data Article number: 113-3-D-C3 GTIN: 8680731500851 Manufacturer: Kukamet Core specifications Closing force: 2,300 N Maximum holding force: 2,500 N Arm length: 158 mm Angle: 90° Weight: 0.432 kg Construction & features Material: galvanised steel Mounting: angle foot Massive holding arm Lever clamp design FAQ What clamping forces does this clamp provide? The Kukamet 113 horizontal toggle clamp offers a closing force of 2,300 N and a maximum holding force of 2,500 N, values suitable for repeatable fixture tasks. Can the clamp be mounted at right angles to a fixture plate? Yes — the clamp features an angle foot mounting that secures the device at a 90° orientation for right‑angle jigs and assembly fixtures. Is the surface finish corrosion resistant? The component is supplied with a galvanised finish, providing basic corrosion protection appropriate for workshop and assembly environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 166mm Massive Arm, 1,000N Push Force / 1,200N Hold Force, Blackened - Kukamet
Robust clamping for dependable jigs and fixtures: benefit from the massive holding arm, a 1,200 N maximum holding capacity and a compact 166 mm reach for repeatable cycle times. Order the clamp directly via Metav Werkzeuge or consult our specialists for compatibility and mounting options. 111 horizontal toggle clamp by Kukamet — massive arm, 90° lever A 111 horizontal toggle clamp designed for secure, repeatable workholding in jigs, fixtures and assembly stations Massive holding arm for stable clamping Horizontal foot mounting for fixture plates 166 mm arm length for extended reach Max holding force 1,200 N for secure workholding Consistent force where it matters The clamp delivers a reliable holding force of 1,200 N, which ensures components remain stationary during machining, assembly and inspection. The difference between pressing force and holding capacity is designed into the mechanism: a 1,000 N pressing capability secures the workpiece while the toggle action locks the position, reducing the risk of slip. This mechanical advantage makes the device suitable for medium-duty production tasks where reproducible clamping pressure and quick release are required. The compact weight and size support tight fixture layouts without sacrificing clamping performance. Simple mounting and repeatable operation Fitted with a horizontal foot mounting, the clamp installs directly to fixture plates and baseplates for a low-profile solution. The 166 mm arm provides extended reach while the 90° lever travel offers intuitive operation in confined spaces. The component's blackened finish gives corrosion resistance and a professional appearance, and the massive holding arm increases rigidity under load. At just 0.254 kg, the unit is lightweight enough to be integrated across multiple stations while providing stable, repeatable clamping cycles that reduce set-up time and improve throughput. Practical benefits for workshop and production use The lever mechanism is optimised for frequent actuation: the toggle design enables quick locking and unlocking with minimal operator effort, supporting higher takt times and reducing fatigue on the shop floor. The combination of robust construction and a compact footprint suits both manual jigs and automated fixtures where space is limited. Supplied by a recognised manufacturer, the device supports consistent quality control and simplifies fixture design choices by delivering predictable clamping performance across batches. For mounting advice, compatibility checks or to secure dependable supply of Kukamet horizontal toggle clamps, contact Metav Werkzeuge GmbH by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: B111-2-D-C3 GTIN: 8680731506976 ECLASS: 21041719 ETIM: EC011973 Facts Arm length: 166 mm Angle: 90° Max pressing force: 1,000 N Max holding force: 1,200 N Weight: 0.254 kg Special features Material/finish: blackened finish Mounting: horizontal foot Massive holding arm Clamp type: horizontal toggle / lever clamp Manufacturer: Kukamet FAQ What is the maximum holding force of this clamp? The clamp provides a maximum holding force of 1,200 N, delivering secure fixation for medium-duty applications. Which mounting method is required for installation? The unit is designed for horizontal foot mounting, allowing direct attachment to fixture plates and baseplates. Is the clamp suitable for automated fixtures? Yes, the toggle action and compact design make it suitable for both manual jigs and automated fixture systems where repeatable clamping is required. What is the arm length and lever travel angle? The arm length is 166 mm and the lever operates through a 90° travel for intuitive actuation. Who supplies this clamp and how can it be ordered? This Kukamet horizontal toggle clamp (SKU B111-2-D-C3) is available via Metav Werkzeuge; contact details are provided above for enquiries and ordering. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 179mm Arm, 4.5kN Closing Force, 5kN Holding Force, Massive Arm & Safety Lock - Kukamet
Benefit from a compact, high‑force clamping solution that combines a 179 mm hold arm with up to 5,000 N holding force and a robust safety latch for consistent, repeatable positioning. The durable blackened finish and horizontal foot mounting minimise setup changes and extend service intervals. Order the horizontal clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Horizontal clamp 111 — Kukamet horizontal lever clamp with 179 mm arm and 5,000 N holding force A robust horizontal lever clamp, the Horizontal clamp 111 secures workpieces at a 90° angle with a massive holding arm and integrated safety latch for workshop and production use. Massive holding arm and safety latch Holding force up to 5,000 N 179 mm arm for compact setups Horizontal foot mounting, 90° clamping Consistent clamping for repeatable setups The lever design delivers a reliable holding force that keeps fixtures stable through machining and assembly operations. With a 179 mm arm and a defined 90° clamping angle, the device reduces repositioning and shortens setup times, which supports higher process throughput. The combination of measurable holding and pressing forces ensures predictable behaviour during cycles, making the clamp suited to jigs and fixture applications where repeatability matters. Built for safety and durable workshop service A massive holding arm and a mechanical safety latch prevent unintended release under load, increasing operational safety and reducing downtime from clamp failures. The blackened finish offers corrosion resistance appropriate for industrial environments while maintaining a professional workshop appearance. At approximately 1.4 kg mass, the component provides solidity without adding unnecessary bulk to fixtures, supporting long life with minimal maintenance. Straightforward integration into fixtures and benches The clamp’s horizontal foot mounting facilitates direct attachment to fixture plates and workbenches, simplifying retrofits and new setups. As a horizontal lever clamp it fits compact arrangements and works well where vertical space is limited. The clear mechanical function of the device allows planners and operators to estimate clamping performance quickly, enabling efficient layout decisions and reduced fixture complexity. Contact Metav Werkzeuge to discuss integrating the Kukamet horizontal clamp 111 into existing fixtures or to request a tailored supply recommendation from our specialists. Technical Data SKU: B111-5-D-L-C2 Brand: Kukamet ECLASS: 21041719 ETIM: EC011973 Facts Arm length: 179 mm Holding force (max): 5,000 N Pressing force (max): 4,500 N Weight: 1.4 kg Clamping angle: 90° Special features Massive holding arm and safety latch Horizontal foot mounting Blackened finish Mounting type: horizontal foot FAQ What holding force does the clamp provide? The Kukamet horizontal clamp 111 provides a holding force of up to 5,000 N, with a separate pressing force rating of 4,500 N for actuation. How is the clamp mounted to fixtures? Mounting is via the horizontal foot; the clamp is designed for direct attachment to fixture plates and benches, enabling compact, 90° clamping arrangements. Is the clamp suitable for continuous workshop use? Yes. The massive hold arm, safety latch and blackened finish ensure durability for regular workshop and light production use; the device’s mass and mechanical design support stable operation with low maintenance. What are the main dimensional and weight characteristics? Key dimensions include a 179 mm arm length and a defined 90° clamping angle. The unit weighs approximately 1.4 kg. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 179mm Arm, 5 000N Hold Force, 4 500N Closing Force, Zinc-Plated, Massive Arm & Safety Lock - Kukamet
Take advantage of a robust clamping solution that combines a galvanised finish, a massive holding arm and a secure locking mechanism to maintain production reliability; the compact design and 5,000 N holding force ensure consistent results in jigs and fixtures. Order the horizontal toggle clamp directly via Metav Werkzeuge or ask our consultants if needed. 111 Horizontal toggle clamp by Kukamet — galvanised, 5,000 N holding force The 111 horizontal toggle clamp is a heavy-duty horizontal clamp designed for jig and fixture applications, offering a 90° clamping angle and secure locking for repetitive production tasks. Massive holding arm for enhanced stability Safety locking mechanism for secure clamping Galvanised finish for corrosion resistance 5,000 N maximum holding force Reliable clamping for production and jigs This horizontal clamp delivers repeatable clamping with a measured holding force of 5,000 N and a clamping force of 4,500 N, making it suitable where consistent workpiece positioning is essential. The 179 mm lever length balances reach and leverage, enabling firm contact without excessive handle travel. By converting high mechanical input into stable holding performance, the device reduces rework and downtime, supporting efficient process chains and higher throughput in small-batch and serial production alike. Safety and durability built in for everyday workshop use A safety locking mechanism prevents accidental release during handling, while the massive holding arm minimises deformation under load, improving long-term stability. The galvanised surface finish offers enhanced resistance to corrosion in standard workshop environments, so fixtures retain alignment and service intervals are extended. These characteristics combine to protect both components and personnel, fostering a reliable working environment and reducing unplanned maintenance. Compact integration into fixtures and easy assembly With a horizontal base mounting and a compact mass of 1.4 kg, the clamp integrates cleanly into bespoke jigs and modular tooling systems without adding excessive bulk. The 90° clamp angle suits a wide range of machining, welding and assembly operations, while the lever geometry simplifies manual operation. The lightweight yet sturdy construction supports frequent repositioning on fixtures and ensures compatibility with common clamping patterns in production setups. Contact Metav Werkzeuge for tailored advice on specifying the Kukamet 111 horizontal toggle clamp, or request a technical data sheet and mounting recommendations via phone or email. Technical Data Article number: 111-5-D-L-C2 GTIN: 8680731500356 SKU: 111-5-D-L-C2 EClass: 21041719 ETIM: EC011973 Facts Weight: 1.4 kg Arm length: 179 mm Clamp angle: 90° Maximum clamping force: 4,500 N Maximum holding force: 5,000 N Special features Mounting: horizontal base Material: galvanised Massive holding arm Safety locking mechanism Category: Clamps (Spanner) FAQ What holding and clamping forces does this clamp provide? The Kukamet 111 horizontal toggle clamp provides a maximum holding force of 5,000 N and a clamping force of 4,500 N for secure positioning in fixtures. Is the clamp suitable for use in humid or spray-prone environments? The galvanised finish on the Kukamet 111 offers improved corrosion resistance for standard workshop and light industrial environments; for continuous outdoor exposure, additional protection is recommended. How is the clamp mounted to a fixture? Mounting is via a horizontal base designed for secure attachment to jigs and fixture plates; the clamp’s compact footprint simplifies integration. What are the main dimensions and weight to consider for fixture design? Relevant values for the 111 are a 179 mm lever arm, a 90° clamp angle and a mass of 1.4 kg, which aid planning for reach and balance in tooling layouts. Does the clamp include a safety feature to prevent accidental release? Yes, the clamp is equipped with a safety locking mechanism and a robust holding arm to prevent unintended opening during handling or machining. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com