Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
90° Horizontal Clamp 217mm Massive Arm 5,000N Holding Force, Blackened Finish - Kukamet
Robust workshop fixturing is delivered by a heavy-duty holding arm paired with up to 5,000 N of holding force and a 217 mm reach for secure positioning. With a compact mass of 1.906 kg and an angled base for 90° mounting, the clamp supports consistent cycle times and safe part retention. Order directly via Metav Werkzeuge or consult our specialists for integration advice. Horizontalspanner 113 (B113-5-D-C3) — Kukamet horizontal lever clamp, 5,000 N holding force The Horizontalspanner 113 is a compact horizontal lever clamp designed for industrial workholding and fixture applications, providing secure part retention and straightforward integration into assembly jigs. Massive holding arm, heavy-duty construction 5,000 N maximum holding force 217 mm reach for larger workpieces Angled base (Winkelfuß) for 90° positioning Secure clamping for uninterrupted production The clamp delivers a high, defined holding force that keeps components immobile during machining or assembly. A rated 5,000 N retention capability, combined with a closing pressure of 4,500 N, ensures that the workpiece remains stable under lateral and axial loads. This performance reduces rework and scrap rates by limiting micro-movement during processing. The robust lever geometry converts operator input into consistent clamping, which is especially useful where repeatable fixture performance is required. Flexible mounting and extended reach for varied parts The angled base offers a reliable method to mount the clamp at 90°, enabling direct fixation to vertical or horizontal plates without additional adapters. The 217 mm arm reach permits clamping of larger or awkwardly shaped workpieces while keeping the main body clear of obstructing tooling. The design suits both batch production and single-station jigs, allowing easy integration into existing fixture plates and modular tooling systems. The combination of reach and compact footprint supports versatile fixture layouts. Durable finish and construction for workshop environments A blackened finish (Schwarz brüniert) protects metal surfaces against corrosion and wear in typical workshop conditions, improving lifetime and appearance. The massive holding arm is engineered to resist bending and vibration, sustaining clamp accuracy over extended use. At 1.906 kg, the device balances rigidity with manageable weight for fixture assembly. These material choices contribute to predictable behaviour and reduced maintenance intervals in everyday industrial use. Practical handling and technical clarity for purchasing teams The clamp’s clear technical ratings simplify selection and risk assessment for procurement and engineering: measurable holding and clamping forces, defined reach and a standardised mounting style reduce uncertainty during machine integration. The compact construction supports quick installation and repeatable positioning in production cells. Where higher volumes or specialised setups are planned, the documented force values and mounting type enable accurate fixture design and finite-element checks if required. Contact Metav Werkzeuge today to specify Kukamet’s Horizontalspanner 113 (SKU B113-5-D-C3) for your fixture project; our Emmerich-based consultants will advise on mounting options and delivery to fit production schedules. Technical data Article number: B113-5-D-C3 GTIN: 8680731507577 eClass: 21041719 ETIM: EC011973 Facts Holding force max: 5,000 N Clamping/closing force: 4,500 N Arm length: 217 mm Angle: 90° Weight: 1.906 kg Special features Material/finish: blackened finish (Schwarz brüniert) Massive holding arm Mounting type: angled base (Winkelfuß) Robust lever clamp design SKU: B113-5-D-C3 FAQ What holding capacity does this clamp provide? The Horizontalspanner 113 (Kukamet horizontal lever clamp, SKU B113-5-D-C3) is rated for a maximum holding force of 5,000 N with a closing force of 4,500 N, offering secure retention for many workshop applications. How is the clamp mounted in a fixture? Mounting is via an angled base (Winkelfuß) designed for 90° positioning, allowing direct attachment to fixture plates or modular tooling systems without special adapters. Which materials and environments suit this clamp? The clamp’s blackened finish offers corrosion resistance suitable for standard workshop environments; the heavy-duty arm and solid construction are intended for metalworking and assembly fixtures. What is the effective reach of the clamp arm? The arm provides a 217 mm reach, enabling clamping of larger or irregularly shaped parts while keeping the body clear of adjacent tooling. Is the clamp heavy to handle during fixture setup? At 1.906 kg, the clamp balances rigidity with manageable weight for manual fixture assembly and positioning. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 3.5 kN Clamping Force, M10x70 Spindle, Blackened - Kukamet
Take advantage of a compact, robust clamping solution with a 3,650 N holding force, a 90° locking angle and an angle-foot mount for secure fixture attachment; order the horizontal clamp directly via Metav Werkzeuge or consult our specialists for application advice. Kukamet Horizontal Clamp 113 — 3,650 N holding force, 90° angle foot mount Horizontal Clamp 113 is a lever-operated horizontal clamping device designed for fixed jigs and fixtures in workshop and light industrial settings, offering reliable holding and compact installation where repeatable clamping is required Blackened finish for corrosion resistance 3,650 N maximum holding force 90° locking angle for secure positioning Angle-foot mounting for stable fixture attachment Reliable clamping for repetitive production The lever-operated horizontal clamp delivers consistent performance across batch and single-piece production. With a maximum holding force of 3,650 N, the device provides secure workpiece retention that reduces slippage during machining and assembly operations. The lever mechanism converts operator input into repeatable clamping, which supports shorter cycle times and fewer adjustments on the jig. Where process stability and throughput matter, this compact clamping solution contributes to predictable results and fewer rejects. Compact design that supports fast installation Engineered for confined jigs, the clamp’s angle-foot mounting permits straightforward attachment to fixture plates and tooling blocks without additional adapter components. The integrated spindle (M10x70) enables precise adjustment of clamping travel and contact pressure, while the blackened finish offers enhanced surface protection in workshop environments. At approximately 0.94 kg, the unit combines low weight with robust construction, making it suitable for portable fixtures or where multiple clamps are required without overloading the assembly. Practical benefits for workshop and small-scale production Installation at a 90° locking angle simplifies positioning and ensures the clamp holds the workpiece down and across the intended datum line, improving repeatability in downstream processes. The clamp’s rated pressing force (3,500 N) and holding force are clearly specified, enabling engineers to assess suitability against material characteristics and machining forces. The mechanism is particularly useful in fixture plates, assembly jigs and testing rigs where a compact, dependable lever clamp helps cut set-up times and supports consistent part quality. For procurement or technical questions regarding the Kukamet Horizontal Clamp 113, contact Metav Werkzeuge for tailored advice and ordering information via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: B113-4 GTIN: 8682843522226 Manufacturer: Kukamet Facts Weight: 0.94 kg Maximum holding force: 3,650 N Maximum pressing force: 3,500 N Locking angle: 90° Spindle: M10x70 eClass: 21041719 ETIM: EC011973 Special features Mounting type: Angle foot Surface: Blackened finish Product type: Horizontal lever clamp Intended use: Fixture and jig clamping FAQ What is the maximum holding force of this clamp? The Kukamet Horizontal Clamp 113 provides a maximum holding force of 3,650 N as specified for fixture retention. Can the clamp be adjusted for different workpiece heights? Yes, the clamp features an M10x70 spindle that allows adjustment of the clamping point to accommodate varying workpiece heights. Is the clamp suitable for heavy-duty machining fixtures? The clamp is designed for robust holding in workshop fixtures; assess the specified holding and pressing forces against the machining loads to confirm suitability for heavy-duty operations. What mounting options are available for this model? This variant comes with an angle-foot mounting for direct attachment to fixture plates and tooling blocks. Which surface protection does the clamp have? The device is supplied with a blackened finish that improves resistance to corrosion and wear in typical workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 43mm Arm Massive Support With Safety Lock, Zinc Coated - Kukamet
Take advantage of the combination of 850 N clamping force, a massive clamping arm and a secure safety lock for dependable fixture holding and uninterrupted production. The galvanised finish and horizontal-foot mount ensure simple integration into jigs and assemblies. Order directly via Metav Werkzeuge or contact our consultants for specification checks. 111 — Horizontal clamp with massive arm and safety lock (Kukamet) The 111 horizontal clamp is a lever-operated holding device for secure workpiece clamping in fixtures, jigs and assembly stations, designed for reliable repetitive use in workshop and light industrial environments. Massive clamping arm for stable fixation Safety locking device for secure retention 850 N clamping force for dependable holding Galvanised finish for corrosion resistance High clamping performance that stabilises production The lever clamp delivers a reliable 850 N clamping force and a holding capacity of 1,000 N, values that translate directly into fewer unclamp cycles and improved setup repeatability. The robust arm construction, described as a massive clamping arm, reduces elastic deformation under load and helps keep workpieces in the correct position during machining or assembly. The integrated safety locking prevents unintended release, lowering the risk of stoppages and rework. For planners and production engineers, these measurable figures provide a clear basis for fixture design decisions and process reliability improvements. Corrosion-resistant finish and compact mounting for long service life Constructed with a galvanised surface treatment, the clamp resists chemical and humidity-related wear common in workshop atmospheres, extending service life and reducing replacement frequency. The horizontal foot mounting and a 43 mm arm length allow compact installation in confined fixture layouts, while the component’s low mass (approx. 0.1 kg) minimises added inertia on moving subassemblies. This combination of materials and dimensions supports a cost-effective, space-saving solution when integrating clamps into pallets, modular fixtures or bespoke jigs. Simple integration, safe operation and supply confidence Designed for easy mechanical attachment and straightforward operation, the lever mechanism operates at a 90° travel angle and is compatible with standard fixture patterns. The secure locking reduces operator error and contributes to a safer workplace routine. Sourcing through an experienced precision partner ensures consistent quality and availability: products pass a quality filter intended for durable workshop use, supporting reliable procurement and inventory planning. For engineering teams seeking predictable performance in repetitive tasks, this clamp provides a practical balance of durability, ease of installation and measurable holding power. Contact Metav Werkzeuge for technical matching and supply: call +49 2822 7131930 or eMail info@metav-werkzeuge.com to confirm suitability and place orders through our Emmerich distribution. Technical data SKU: 111-1-D-L-C1 GTIN: 8680731505269 Manufacturer: Kukamet Facts Max clamping force: 850 N Max holding force: 1,000 N Arm length: 43 mm Angle: 90° Weight: 0.1 kg eClass: 21041719 ETIM: EC011973 Special features Material: galvanised Mounting: horizontal foot Massive clamping arm Safety locking device FAQ What clamping and holding forces does this clamp provide? The 111 horizontal clamp offers a maximum clamping force of 850 N and a holding capacity of 1,000 N, providing dependable retention for fixture applications. Is the clamp suitable for humid or corrosive workshop conditions? Yes, the galvanised finish on the Kukamet horizontal clamp improves corrosion resistance and is intended to extend service life in typical workshop environments. How is the clamp mounted in fixtures? The device is designed for a horizontal-foot mount and a compact footprint, enabling straightforward attachment in pallets, jigs and modular fixture systems. Does the clamp include a safety lock to prevent accidental release? A safety locking device is integrated into the lever clamp to secure the arm in the engaged position and reduce the risk of unintended unclamping. What are the physical dimensions relevant for integration? Key dimensions include a 43 mm arm length, a 90° lever travel angle and an overall mass of approximately 0.1 kg, suitable for tight fixture layouts and light assembly stations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 43mm Arm, 850N Thrust 1000N Holding Force, Zinc Plated, Locking Lever - Kukamet
Robust zinc-plated construction, a massive holding arm and a safety locking mechanism ensure secure clamping at a 90° angle; with an 850 N clamping force and 1,000 N holding capacity the device keeps fixtures stable during machining. Order the clamp directly from Metav Werkzeuge or consult the team for application advice. Horizontal clamp 112 — zinc-plated, 850 N clamping force (Kukamet) The Horizontal clamp 112 is a lever-operated horizontal clamp with vertical-foot mounting, designed for secure workholding at a 90° angle in general workshop and light industrial fixtures. Solid holding arm with safety lock Zinc-plated finish for corrosion resistance Vertical-foot mounting for fixture attachment 850 N clamping force, 1,000 N holding capacity Reliable clamping for stable machining The toggle-style mechanism delivers a dependable 850 N clamping force, while the specified 1,000 N holding capacity represents the maximum resistance against unintended part movement. Clamping force indicates the nominal pressure applied by the spindle, whereas holding capacity reflects the static resistance under load; together these values give a clear indication of process stability. This level of performance reduces rework and downtime when used for light-to-medium assembly and machining tasks, ensuring components remain fixed during cutting, drilling or inspection. Flexible mounting and compact integration Designed with a vertical-foot mounting and a compact 43 mm arm, the unit integrates easily into bespoke fixtures and jigs where a 90° clamping direction is required. The vertical foot permits rigid attachment to a base plate or fixture block, allowing the clamp to sit flush and save space on the workbench. At only 0.1 kg, the device is lightweight enough for modular fixturing yet robust in operation thanks to the solid holding arm, making it suitable for repetitive production processes and quick fixture changes. Durable finish and safety-oriented design A zinc-plated coating protects the steel construction from corrosion in workshop environments, extending service life and reducing maintenance intervals. The safety locking mechanism prevents accidental release under vibration or handling, increasing operator confidence during set-up. The lever-operated design offers quick actuation and tactile feedback, combining operational speed with a reliable mechanical lock for repeated cycles. For application guidance and to purchase the Kukamet Horizontal clamp 112, contact Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored fixture advice and prompt processing. Technical data Article number: 112-1-D-L-C1 GTIN: 8680731501384 Brand: Kukamet eClass: 21041719 ETIM: EC011973 Core specifications Clamping force: 850 N Holding capacity: 1,000 N Arm length: 43 mm Angle: 90° Weight: 0.1 kg Materials & special features Zinc-plated steel Vertical-foot mounting Solid holding arm Safety locking mechanism SKU: 112-1-D-L-C1 FAQ What clamping and holding forces does the clamp provide? The Horizontal clamp 112 specifies an 850 N clamping force and a 1,000 N holding capacity, values that indicate both applied pressure and the maximum static resistance under load. How is the clamp mounted in a fixture? The device features a vertical-foot mounting that allows rigid attachment to a base plate or fixture block; the design suits integration into bespoke jigs where space is constrained. Is the surface finish suitable for workshop environments? Yes, the zinc-plated finish on the Horizontal clamp 112 protects the steel body from corrosion and reduces the need for frequent maintenance. Does the clamp include a safety feature to prevent accidental release? A mechanical safety locking mechanism is incorporated to prevent unintended opening under vibration or handling, improving process safety. What are the typical applications for this type of clamp? This lever-operated horizontal clamp is intended for general workholding in assembly, drilling and light machining operations where reliable 90° clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 43mm Arm, Solid Holding Arm, 1,000 N Hold Force, 850 N Thrust - Kukamet
Take advantage of a massive holding arm, compact footprint and clear force ratings to secure workpieces reliably in repeat production; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. 111 Horizontal clamp — horizontal foot mounting, 1,000 N holding force (Kukamet) A 111 horizontal clamp designed for secure lateral workholding in jigs and fixtures, featuring a robust holding arm and clearly specified force values for controlled clamping. Massive holding arm Max holding force 1,000 N Max pressing force 850 N Horizontal mounting foot, 90° angle Secure clamping for repeatable production The combination of a massive holding arm and a rated holding force of 1,000 N delivers consistent workpiece retention across repeated cycles. Specified force values remove uncertainty during fixture design: the difference between the pressing force (850 N) and the holding force allows planners to assess both actuation load and static retention separately. For production environments this means reduced rework, fewer fixture adjustments and predictable process stability when the clamp is integrated into a repeat operation or a jig. Compact, lightweight design that simplifies setup With a short arm of 43 mm and a nominal mass of 0.108 kg, the clamp keeps additional mass on assemblies to a minimum while providing a solid contact surface. The horizontal mounting foot and fixed 90° angle are suited to confined fixtures where lateral restraint is required without complex sub‑structures. The blackened finish gives the component a uniform industrial appearance and allows straightforward alignment in modular clamping systems, easing both installation and interchangeability within existing tooling. Clear actuation and versatile fixture integration A horizontal foot and lever geometry ensure reproducible actuation in standard jig arrangements; the clamp’s pressing and holding ratings enable correct actuator selection and safe margin calculation. Specification of the clamp’s pressing force and holding force supports rational decision‑making when choosing pneumatic or manual actuation. The unit’s compact profile and robust arm make it suitable for workholding tasks where secure lateral restraint is essential, such as machining fixtures, assembly jigs and inspection stations. Discuss compatibility with Metav Werkzeuge to confirm the Kukamet clamp fits the intended fixture and to arrange supply from our Emmerich distribution centre Technical Data Article number: B111-1-D-C1 GTIN: 8682843522141 Manufacturer: Kukamet Material finish: Blackened finish Core specifications Arm length: 43 mm Angle: 90° Max holding force: 1,000 N Max pressing force: 850 N Weight: 0.108 kg Special features Massive holding arm Horizontal mounting foot Compact, lightweight construction Suitable for jig and fixture integration FAQ What clamping and pressing forces are specified for this clamp? The 111 horizontal clamp specifies a maximum holding force of 1,000 N and a pressing force of 850 N, allowing clear calculation of retention and actuation loads for fixture design. Is the clamp suitable for tight‑space fixtures? Yes, the short 43 mm arm and low weight (0.108 kg) make the clamp appropriate for confined jigs and modular fixture systems where minimal added mass is required. How is the clamp mounted and oriented? The clamp uses a horizontal mounting foot and provides a fixed 90° angle, making it straightforward to integrate into lateral workholding arrangements. What does the blackened finish indicate for use in production? The component is supplied with a blackened finish which provides a consistent industrial surface appearance suitable for workshop and production environments. Which applications match the clamp’s design? The unit is intended for lateral workholding in jigs, fixtures, assembly stations and inspection setups where secure, repeatable restraint is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 450 N Clamping Force, Metal Handle, Blackened Finish - Kukamet
Take advantage of the compact design, 520 N holding force and 450 N clamping force for secure, repeatable workholding in light fixtures; order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Horizontal clamp 111 by Kukamet — 520 N holding force, metal handle A robust horizontal clamp 111 for light-duty fixtures and jigs, designed to deliver reliable positioning and rapid locking in confined spaces. Horizontal mounting foot Metal handle for long service life 520 N max holding force Compact 0.042 kg body Stable fixing for precise, repeatable setups The lever-style clamp provides a holding force of 520 N and a clamping force of 450 N, which together ensure secure retention of small components during assembly and light machining. The short spindle with its M4x25 specification allows precise adjustment and consistent torque transmission, reducing rework and downtime. This performance is particularly valuable where repeatability matters and every second on the production line counts. Durable finish and compact integration With a blackened finish and a metal handle, the device resists surface wear and offers a tactile, dependable actuation under frequent use. The horizontal mounting foot and a 90° configuration enable space-saving placement on fixtures and plates, while the unit’s compact design (approx. 0.042 kg) minimises added mass on delicate jigs. These attributes simplify retrofit into existing assemblies and support efficient toolroom workflows. Practical applications and quick handling Engineered for jigs, small clamping plates and light assembly work, the clamp suits environments that demand quick manual locking and reliable retention. Its lever mechanism shortens setup time and the robust handle ensures comfortable operation over repeated cycles. Where small components must be held steadily for inspection or light processing, this clamp delivers a balance of stiffness and user-friendly handling that supports consistent throughput. Choose the Kukamet 111 horizontal clamp for compact, reliable workholding — contact Metav Werkzeuge for stock information and tailored assembly guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical details SKU: B111-0-M GTIN: 8680731506907 Manufacturer: Kukamet Core technical data Holding force: 520 N Clamping force: 450 N Weight: 0.042 kg Angle: 90° Spindle: M4x25 Special features Mounting: horizontal foot Handle: metal Finish: blackened Category: Spanner eClass: 21041719 ETIM: EC011973 FAQ What is the difference between holding force and clamping force? The holding force indicates the maximum retention the clamp can maintain under load, while the clamping force describes the applied downward or lateral force when the lever is engaged; the Kukamet 111 combines both to keep small workpieces secure. How is the clamp mounted? The unit is designed for a horizontal mounting foot arrangement and is fastened directly to fixture plates or jigs for rigid attachment. What is the spindle specification? The clamp uses an M4x25 spindle, which defines the thread size and travel for adjustment. Is the finish suitable for workshop use? The blackened finish provides basic surface protection against wear and is suitable for general workshop environments. Which applications are recommended for this clamp? Best suited to jigs, small assembly fixtures and light machining operations where compact, repeatable clamping is required; the Kukamet 111 is intended for quick manual locking and frequent operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 450 N Thrust, Metal Handle, Stainless Steel, Wafer Base - Kukamet
Take advantage of durable stainless steel construction, a compact 90° locking position and a reliable holding force 520 N for stable fixturing in jigs and fixtures. Order the horizontal toggle clamp directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 111 — Kukamet horizontal toggle clamp, stainless steel, 90° lock The Horizontal clamp 111 is a compact horizontal toggle clamp designed for fixture and jig applications where a secure 90° locking position and corrosion resistance are required Stainless steel construction 90° locking position Holding force 520 N Horizontal foot mounting Secure, repeatable clamping for series production The horizontal toggle clamp delivers a consistent hold, making it suitable for repeated operations in assembly and machining environments. Its robust stainless steel body resists corrosion and mechanical wear, which translates into predictable clamping cycles and reduced downtime for maintenance. By combining a compact profile with a solid locking geometry, this device supports higher throughput and fewer reworks in jigs or small fixture assemblies. Clear performance metrics that simplify integration Performance is expressed in measurable terms for straightforward selection and planning: holding force 520 N and clamping force 450 N indicate the secure retention and compressive capability respectively. The unit features an M4x25 pressure spindle, enabling fine adjustment of contact pressure. These specifications allow engineers and buyers to assess suitability against component mass and process forces without extensive trial-and-error, reducing setup time and ensuring compatibility with downstream operations. Fast mounting and dependable operation on the shop floor The horizontal foot mounting offers simple installation onto flat fixture plates or tooling blocks, and the 90° locking position establishes an unmistakable engaged state for operators. The metal handle provides tactile feedback and long service life under frequent actuation. Lightweight and compact, the clamp minimises additional mass on moving fixtures while maintaining secure contact, which supports faster cycle times and ergonomic handling during manual or semi-automated workflows. Practical fit for workshops and production lines Designed for use in industry, craft workshops and toolrooms, the clamp is particularly well suited to jigs, assembly stations and small fixtures where corrosion resistance and repeatability matter. Procurement and maintenance benefit from standardised threads and a straightforward mechanical design that technicians can inspect and replace with common tooling. For businesses seeking reliable fixturing components, the combination of stainless construction and quantified clamping values supports long-term process stability. For procurement advice or to secure delivery from our Emmerich warehouse, request the Kukamet horizontal toggle clamp 111 via Metav Werkzeuge — our consultants will advise on integration and lead times Technical data SKU: S111-0-M GTIN: 8680731508871 Manufacturer: Kukamet Weight: 0.042 kg Holding force (max): 520 N Clamping/pressing force (max): 450 N Angle: 90° Pressure spindle: M4x25 eClass: 21041719 ETIM: EC011973 Material: stainless steel Mounting: horizontal foot Handle: metal Product type: horizontal toggle clamp Category: clamps FAQ What is the primary use for this horizontal clamp? The horizontal clamp 111 from Kukamet is intended for securing workpieces in fixtures, jigs and small assembly stations where a 90° locking position and repeatable clamping are required. Can the clamp be adjusted to change contact pressure? Yes. The clamp uses an M4x25 pressure spindle for fine adjustment of the contact pressure to match different workpiece thicknesses and surface conditions. Is the clamp suitable for corrosive environments? The clamp’s stainless steel construction provides enhanced corrosion resistance, making it appropriate for environments where moisture or common workshop contaminants are present. What mounting method is required for installation? A horizontal foot mounting is provided for attachment to flat fixture plates or tooling surfaces; standard machine screws compatible with the mounting holes can be used. Which forces should be considered when selecting this clamp? Consider the holding force 520 N and clamping force 450 N as primary selection criteria; these values describe retention capability and compressive load capacity for stable fixturing. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 60mm Arm, Massive Arm With Safety Lock, 1,000N Press Force - Kukamet
Secure, compact clamping performance with a 60 mm arm and a safety locking mechanism for consistent holding; the galvanised finish provides corrosion resistance while the 1,200 N holding force keeps fixtures steady. Order the Horizontal clamp 113 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 113 — galvanised lever clamp with 60 mm arm and safety lock The Horizontal clamp 113 is a compact lever clamp designed for secure workpiece fixation at 90° in assembly and jigging applications, combining a solid holding arm with a dedicated safety locking mechanism. Robust 60 mm holding arm Safety locking mechanism included Galvanised steel for corrosion resistance Clamping force up to 1,200 N Reliable holding power for repeatable processes The clamp provides a clear technical benefit through its combination of 1,000 N clamping force and 1,200 N holding force, delivering reliable fixation for repetitive tasks and short-cycle production. The solid holding arm supports stable pressure transfer, reducing part movement during processing and inspection. This translates into fewer reworks and improved throughput when used in fixtures, jigs or small assembly stations, with the numerical values offering an objective basis for process planning. Simple integration and secure handling on the shop floor Fitted with an angle foot for straightforward mounting, the device permits quick incorporation into existing fixtures and tooling plates at a fixed 90° orientation. The lever-style actuation and safety lock reduce the risk of accidental release while enabling rapid clamping and release cycles, which supports ergonomic handling and operator confidence. Compact dimensions and a lightweight design keep the installation footprint minimal without compromising functional robustness. Durable finish and suitability for industrial environments Constructed from galvanised steel and weighing just 0.27 kg, the clamp balances corrosion resistance with easy handling during assembly and maintenance. The combination of a massive holding arm and secure locking mechanism ensures longevity under frequent use, while the compact form factor makes it suitable for confined setups and portable jigs. Clear technical specifications and mechanical simplicity make this clamp a pragmatic choice for workshops seeking dependable, low-maintenance clamping solutions. Specify Kukamet’s Horizontal clamp 113 with its 60 mm arm and safety lock via Metav Werkzeuge for professional-grade clamping; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and delivery from Emmerich Technical data Article number: 113-2-D-L-C1 GTIN: 8680731500783 SKU: 113-2-D-L-C1 Facts Arm length: 60 mm Angle: 90° Clamping force: 1,000 N Holding force: 1,200 N Weight: 0.27 kg Special features Material: galvanised steel Mounting: angle foot Safety locking mechanism Massive holding arm Category: clamp FAQ What clamping and holding forces does the clamp provide? The Kukamet Horizontal clamp 113 offers a clamping force of 1,000 N and a holding force of 1,200 N, values that support secure fixation in repetitive assembly and jigging tasks. How is the clamp mounted? Mounting is via an angle foot, allowing secure attachment at a 90° orientation for straightforward integration into fixtures and tooling plates. Is the clamp suitable for corrosive or humid environments? The galvanised finish on the Horizontal clamp 113 enhances corrosion resistance, making it appropriate for general workshop environments where surface protection is required. Does the clamp include a safety feature to prevent accidental release? Yes, the clamp is equipped with a safety locking mechanism that prevents unintentional opening and improves handling safety during operations. How compact is the clamp for use in confined fixtures? Weighing 0.27 kg with a 60 mm arm, the clamp is compact and lightweight, designed for minimal footprint in confined jigs and small assembly setups. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 66mm Massive Holding Arm, 1,200N Hold Force, Blackened Finish - Kukamet
A compact, robust clamp that combines a massive holding arm with a vertical-foot attachment for secure, repeatable single-point workholding; offering up to 1,200 N static holding capacity and a responsive 1,000 N actuation force for reliable fixture performance. Order the clamp directly via Metav Werkzeuge or consult our technical team for integration advice. Horizontal clamp 112 by Kukamet — vertical-foot mounting, 66 mm arm A Horizontal clamp 112 built for light-duty jigs and fixtures, providing a rigid lever action and a short reach suited to compact workstations. Massive holding arm Vertical-foot mounting 66 mm arm length Max holding force 1,200 N Precision clamping that raises throughput The clamp delivers a clear productivity advantage through its combination of compact geometry and robust load capacity. With a holding force rated at 1,200 N and an actuation (pressing) capacity of 1,000 N, the device stabilises small components during machining, assembly or inspection. The differentiation between actuation and holding is important: the actuation force is the mechanical input applied via the lever, while the holding force denotes the maximum static load the clamp will sustain once engaged. This distinction supports predictable cycle times and reduces rework caused by part movement. Space-saving design and simple fixture integration The short 66 mm arm and vertical-foot mounting allow the clamp to be mounted close to the workpiece, reducing cantilever effects and enabling denser fixture layouts. The massive holding arm increases rigidity where it matters, improving repeatability in operations where small deviations translate to scrap. At a net weight of approximately 0.2 kg, the component adds minimal inertia to moving assemblies and is therefore suitable for both stationary fixtures and rotating jigs where mass must be minimised. Corrosion-resistant finish and low maintenance A blackened (brüniert) finish protects surfaces against light corrosion while providing a subdued appearance that suits professional workshop environments. The surface treatment reduces the need for frequent lubrication and supports consistent contact behaviour over prolonged use. For everyday workshop handling, the combination of durable surface treatment and solid lever mechanics ensures long service intervals and predictable clamping cycles, helping to reduce downtime and maintenance planning. For fast supply and expert advice on integrating this Kukamet clamp into existing fixtures, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss technical requirements and delivery options Technical Data Article number: B112-2-D-C1 GTIN: 8682843522172 eClass: 21041719 ETIM: EC011973 Facts Arm length: 66 mm Angle: 90° Max pressing force: 1,000 N Max holding force: 1,200 N Weight: 0.2 kg Special features Mounting: vertical foot Finish: blackened / brüniert Design: massive holding arm Category: clamp / spanner FAQ What is the difference between pressing force and holding force? The pressing force is the mechanical input applied during clamping; the holding force is the maximum static load the clamp will sustain once engaged. The Horizontal clamp 112 offers 1,000 N actuation and up to 1,200 N holding capacity. Can the clamp be mounted directly to a fixture plate? Yes. The vertical-foot mounting is intended for direct attachment to fixture plates and bases, simplifying integration into modular jigs. Is the surface treatment suitable for humid workshop environments? The blackened (brüniert) finish offers basic corrosion resistance and reduced maintenance compared with untreated steel; for aggressive environments additional protection is recommended. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 68mm Arm Zinc Plated Heavy-Duty Three-Point Locking, 2.5kN Hold - Kukamet
Take advantage of a galvanised construction combined with a massive holding arm and integrated safety lock for secure, repeatable clamping in production and assembly. The compact design delivers up to 2,500 N holding force while remaining lightweight for easy fixture integration. Order directly via Metav Werkzeuge or consult our specialists for application guidance. Horizontalspanner 111 — Horizontal clamp with massive holding arm and safety lock (Kukamet) A Horizontalspanner 111 is a horizontal toggle clamp engineered to secure workpieces at a 90° orientation within jigs, fixtures and assembly stations. Galvanised steel construction Massive holding arm and safety lock Holding force up to 2,500 N Horizontal base mounting, 68 mm arm Dependable clamping that improves repeatability A compact clamp delivering consistent force reduces setup variation across production runs. The unit provides a rated holding force of 2,500 N and a maximum pressing force of 2,300 N, ensuring reliable retention for a wide range of light to medium-duty operations. This force rating translates into fewer re-clamps and less part movement during machining or assembly, which improves overall process stability and lowers scrap rates. The clear, measurable values support planning for fixture design and process control. Built for workshop durability and safety Constructed from galvanised steel, the clamp resists corrosion in typical workshop environments while remaining low-maintenance. The massive holding arm improves load distribution and reduces wear at contact points, and the integrated safety lock prevents accidental release during handling or vibration-prone processes. These features combine to prolong service life and reduce downtime for replacements or repairs, delivering tangible savings over multiple production cycles. Quick to integrate into jigs and fixtures Designed for horizontal base mounting at a 90° clamping angle and a 68 mm lever arm, the clamp fits compact layouts and standard fixture plates. Its lightweight character (approx. 0.3 kg) simplifies handling during installation and positioning, while the standard mounting arrangement allows straightforward retrofitting into existing tooling. This ease of integration shortens fixture setup time and supports flexible manufacturing layouts where fast changeovers matter. Practical applications and operational advantages The clamp is suitable for repeated securing tasks in assembly, inspection and light machining fixtures where predictable retention is required. Its robust arm and locking mechanism are particularly helpful where consistent pressure and accidental release prevention are priorities. By converting technical specifications into operational benefits—stable clamping, reduced rework and simplified fixture mounting—the clamp supports more efficient workflows on the shop floor. Contact Metav Werkzeuge for detailed application advice and to request a tailored quote for the Kukamet Horizontalspanner 111 to ensure the right clamp solution for your fixtures Technical data SKU: 111-3-D-L-C1 GTIN: 8680731500172 Eclass: 21041719 ETIM: EC011973 Core data Weight: 0.3 kg Arm length: 68 mm Angle: 90° Holding force: 2,500 N Clamping/pressing force: 2,300 N Special features Material: galvanised steel Mounting: horizontal base Massive holding arm Safety lock integrated FAQ What holding force does the clamp provide? The clamp delivers a holding force of up to 2,500 N; the rated pressing force is 2,300 N, which makes it suitable for many light to medium-duty clamping tasks. How is the clamp mounted in fixtures? Mounting is via a horizontal base; the design includes a 68 mm lever arm and a 90° clamping angle for straightforward integration into jigs and fixture plates. Is the clamp suitable for harsh workshop environments? Yes. The galvanised finish offers corrosion protection appropriate for standard workshop conditions, and the robust arm with a safety lock adds operational safety. Can the clamp be used for assembly and inspection tasks? Absolutely. The clamp’s consistent retention and safety lock make it well suited to assembly, inspection and light machining fixtures where repeatable clamping is required. Which SKU should be ordered for this model? Order SKU 111-3-D-L-C1 for this Horizontalspanner 111; refer to the GTIN 8680731500172 when specifying the item. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 850 N Clamping Force, Safety Lock, Stainless Steel - Kukamet
Compact stainless‑steel construction, a positive safety lock and reliable holding performance make this horizontal lever clamp ideal for repeatable fixtures; combine 1000 N holding force, a 90° lever and compact weight for efficient set‑ups. Order the Horizontalspanner 111 directly via Metav Werkzeuge or ask our consultants for specification advice. Horizontalspanner 111 — Horizontal clamp in stainless steel with safety lock Horizontalspanner 111 is a compact horizontal lever clamp intended for secure workholding in jigs, fixtures and assembly stations where repeatable clamping and a positive lock are required Stainless steel construction Integrated safety lock Holding force 1000 N Horizontal foot mounting Consistent clamping power for repeatable results The clamp delivers 1000 N holding force with a maximum pressing or clamping force of 850 N, providing dependable retention for short cycles and batch work. Forces are given in Newtons (N); the higher holding force reduces slippage and keeps workpieces stationary during machining, assembly or inspection. For production planners this means fewer re‑runs and steadier process output, while engineers benefit from predictable, measurable clamping performance. Durable construction for rough workshop use Made from stainless steel, the unit combines corrosion resistance with a light footprint — approximately 125 g — allowing integration into compact fixtures without adding excessive mass. The material choice reduces maintenance needs and extends service life in environments exposed to coolant, humidity or occasional contamination. The compact profile supports close‑packed fixture layouts and simplifies storage and transport within the workshop. Safe, fast operation that protects processes An integrated safety lock secures the lever in the closed position, preventing accidental release under vibration or handling. The 90° lever offers a clear locked/unlocked position and enables quick motion for rapid set‑ups. As a lever clamp, it converts a short manual movement into substantial clamping force, accelerating changeover times and reducing operator fatigue compared with multiple screw adjustments. Simple installation and precise adjustment for fixtures The clamp is supplied with an M5 x 35 mm spindle, allowing fine axial adjustment and easy replacement with standard threaded parts. Horizontal foot mounting is suited to tabletop jigs and plate fixtures, enabling a stable base and straightforward bolting. The compact design and standard thread size mean the unit integrates with existing fixture plates and can be positioned to suit part geometry and tool paths without complex machining. Contact Metav Werkzeuge today to discuss specification and integration of the Kukamet Horizontalspanner 111 — our consultants will advise on fixture layout, compatibility and supply from Emmerich Technical Data SKU: S111-1-L GTIN: 8680731508888 Manufacturer: Kukamet Facts Weight: 0.125 kg Max pressing force: 850 N Max holding force: 1000 N Lever angle: 90° Special features Material: Stainless steel Mounting: horizontal foot Spindle: M5 x 35 mm Safety lock: yes FAQ What clamping and holding forces does the Horizontalspanner 111 provide? The Kukamet Horizontalspanner 111 has a maximum holding force of 1000 N and a maximum pressing/clamping force of 850 N, giving consistent retention for fixture work. How is the clamp mounted in a fixture? Mounting is by a horizontal foot; the clamp is designed to be bolted to plates or bases and positioned for direct lateral clamping. Is there a safety mechanism to prevent accidental opening? Yes, an integrated safety lock secures the lever in the closed position to reduce the risk of accidental release during vibration or handling. What adjustment options are available for fine positioning? Adjustment is via the M5 x 35 mm spindle, allowing axial tuning and simple replacement with standard threaded components. Is the clamp suitable for tight or compact fixture layouts? Its compact stainless‑steel construction and low weight (0.125 kg) make it suitable for close‑packed fixtures and applications where space and corrosion resistance matter Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 850 N Hold Force With Safety Lock, Blackened Steel - Kukamet
A compact, high-performance clamp that combines a strong holding force of up to 1,000 N with a secure safety lock, enabling reliable, repeatable workholding; order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. Horizontal clamp 112 (B112-1-L) by Kukamet — 90° lever clamp with safety lock and 1,000 N holding force A Horizontal clamp 112 designed for safe, repeatable clamping at a right angle, suitable for jigs and fixtures with vertical-foot mounting Compact 90° lever clamp Up to 1,000 N holding force Safety lock included Vertical-foot mounting Secure clamping that keeps jobs on schedule The Horizontal clamp 112 delivers dependable clamping for light- to medium-duty assembly and fixturing. With a rated holding force of 1,000 N and a maximum pressing force of 850 N, the device reduces workpiece movement and the risk of rework, improving throughput and process stability. The integrated safety lock maintains the clamp position under vibration, providing measurable gains in repeatability and operator confidence during cyclical production. Compact, rapid handling for shopfloor efficiency Designed with a vertical-foot mounting and a compact body weighing only 0.125 kg, the clamp is easy to integrate into existing jigs and small fixtures without adding bulk. The pressure spindle M5x35 permits fine adjustment of contact pressure while the lever action ensures fast engagement and release, shortening cycle times. The low mass and small footprint help to optimise machine accessibility and simplify fixture layout in limited spaces. Durable finish and consistent right-angle locating A blackened finish provides corrosion resistance and a discreet appearance that resists grime in busy workshops. The fixed 90° angle ensures consistent lateral positioning of components, supporting accurate assembly and machining set-ups. The lever mechanism and hardened contact surfaces are configured for frequent operation, so the clamping unit performs reliably across long production runs while preserving the quality of the clamped parts. Clear benefits for workshop integration and safety Beyond mechanical performance, the clamp offers practical advantages: straightforward mounting reduces installation time, the locking mechanism enhances operator safety during unattended cycles, and the mechanical design requires minimal maintenance. As a compact lever clamp, it is particularly suitable for small-batch production, repair benches, and prototype fixtures where secure, repeatable clamping and quick handling make a measurable difference to productivity. For secure, compact workholding choose the Kukamet Horizontal clamp 112 — order via Metav Werkzeuge or contact our technical consultants at info@metav-werkzeuge.com or +49 2822 7131930 for application guidance and compatibility checks. Technical data SKU: B112-1-L GTIN: 8680731507164 Manufacturer: Kukamet Facts Weight: 0.125 kg Holding force max: 1,000 N Pressing force max: 850 N Angle: 90° Pressure spindle: M5x35 eClass: 21041719 ETIM: EC011973 Special features Material: blackened finish Mounting: vertical-foot mounting Safety lock: yes Product type: horizontal lever clamp FAQ How much clamping force does the device provide? The Kukamet Horizontal clamp 112 provides a holding force of up to 1,000 N and a maximum pressing force of 850 N for secure positioning. Can this clamp be mounted on a fixture plate? Yes, the clamp is supplied for vertical-foot mounting, making it suitable for attachment to fixture plates and small jigs. Is there an adjustment for contact pressure? The unit includes a pressure spindle M5x35 for fine adjustment of contact pressure, allowing precise setting for different workpiece materials. What safety features are included on the clamp? The horizontal lever clamp is fitted with a safety lock to secure the lever in the closed position and prevent unintended release during vibration or cyclic operation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 91mm Arm, Massive Holding Arm With Safety Lock, Zinc-Plated - Kukamet
Reliable clamping performance and a compact footprint make the horizontal toggle clamp an efficient choice for fixture work. With a galvanised finish, a massive holding arm and a 91 mm clamping reach, it delivers repeatable results and long service life. Order the clamp directly via Metav Werkzeuge or ask the consultants if further specification support is required. Horizontal toggle clamp 113 by Kukamet — galvanised, 91 mm arm The Horizontal toggle clamp 113 is a robust horizontal clamping solution for jigs and fixtures, designed for secure workpiece retention in production and assembly processes Galvanised corrosion-resistant finish Massive holding arm with safety lock 91 mm clamping arm for tight spaces 3,650 N maximum holding force Precise, repeatable retention for production tasks The compact horizontal clamp combines a massive holding arm with a positive safety lock, providing consistent clamping and reduced movement during machining or assembly. The device is specified with a maximum holding force of 3,650 N and a pressing capability of 3,500 N, values that support secure fixation without overloading standard jigs. The robust mechanical action is optimised for repeatability, which reduces set-up time and minimizes rework in repetitive production steps. Space-efficient mounting for tight fixture layouts Thanks to its 91 mm arm length and an angle foot mounting arrangement, the clamp fits into compact fixture designs while maintaining an effective leverage ratio. The 90° operating orientation allows integration on base plates or side rails where vertical space is limited. The geometry supports close-packed layouts on modular tooling plates, enabling more workstations per fixture without sacrificing clamping force or accessibility. Corrosion protection and workshop durability Constructed with a galvanised finish, the clamp resists corrosion in workshop environments and requires minimal maintenance. At just 0.94 kg, the component is light enough for easy handling during assembly but engineered to withstand industrial use because of its solid arm design. Galvanisation extends component life in mixed-environment applications, promoting predictable service intervals and lower total cost of ownership for maintenance teams. Quick installation and reliable operation under load The clamp is supplied with an angle-foot mounting format for straightforward attachment to plates and braces; the lever mechanism engages quickly and locks securely to the preset clamping position. The simple mechanical principle means no auxiliary power is required, and the design is suited for high-cycle applications where fast clamping and unclamping contribute to throughput. The model’s specification supports integration into manual and semi-automated workflows where dependable mechanical holding is required. Contact Metav Werkzeuge for precise application advice and to secure the Kukamet horizontal toggle clamp 113 for workshop or production use Technical Data Article number: 113-4-D-L-C1 GTIN: 8680731500950 Model: 113 Name: Horizontal toggle clamp Facts Arm length: 91 mm Maximum holding force: 3,650 N Maximum pressing force: 3,500 N Angle: 90° Weight: 0.94 kg ECLASS: 21041719 ETIM: EC011973 Special features Galvanised finish Angle foot mounting Massive holding arm Safety lock Horizontal lever clamp design FAQ What clamping forces can be expected from this clamp? The Kukamet horizontal toggle clamp 113 provides a maximum holding force of 3,650 N and a pressing capacity of 3,500 N, making it suitable for secure retention in light to medium-duty fixtures. Is the clamp suitable for installation in compact fixtures? Yes, the 91 mm arm and angle-foot mounting of the 113 make it particularly well suited for tight layouts and modular tooling plates where space is restricted. How does the safety lock work and why is it important? The integral safety lock on the toggle clamp secures the lever in the closed position, preventing accidental release under vibration or impact and ensuring consistent process reliability with Kukamet clamps. What environmental protection does the clamp offer? The clamp is finished with a galvanised coating to resist corrosion in standard workshop environments, which helps extend service life and reduces maintenance frequency. Can this clamp be used in production lines with frequent cycles? The solid arm and mechanical toggle action of the 113 are engineered for high-cycle use; the design supports fast manual or semi-automated clamping operations with consistent repeatability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 93mm Massive Arm 850N Thrust, 1,000N Hold Force, Blackened Finish - Kukamet
Compact and robust, the Kukamet horizontal clamp 111 pairs a massive holding arm with a 1,000 N maximum holding force and an effective lever length of 93 mm, delivering repeatable clamping for jig and fixture work. Order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Horizontal clamp 111 — Kukamet horizontal toggle clamp with 1,000 N holding force The Horizontal clamp 111 is a horizontal toggle clamp designed for secure fixture clamping in jigs, assembly and light production environments. Massive holding arm for secure clamping 1,000 N maximum holding force Horizontal base for stable fixture mounting Consistent clamping for repeatable production This horizontal toggle clamp delivers reliable results through a clear performance profile: a maximum holding force of 1,000 N combined with a clamping force of 850 N ensures components remain secure during machining, assembly or testing. The robust holding arm transfers clamping energy with minimal flex, reducing variation between cycles and supporting consistent part quality. The specification distinguishes holding and clamping values to help planners size clamps correctly for the required safety margins and process loads. Space‑saving design that suits tight fixtures Compact dimensions make this clamp straightforward to place into jigs and benches where space is limited. The lever projects 93 mm, the clamp locks at 90°, and the unit weighs only 0.134 kg, allowing multiple devices to be installed without excessive mass or interference. The horizontal base is intended for stable fixture mounting and aligns the clamping force close to the workpiece, which improves access and reduces overhang. These features are particularly useful in small-batch production and manual assembly cells where footprint and operator access matter. Durable finish and simple integration for workshop use The component carries a blackened finish, offering basic surface protection and a professional appearance that blends with common workshop tooling. The massive holding arm and lever clamp design support frequent operation and reduce the need for early replacement. Mounting is via a horizontal foot, enabling quick integration into existing fixtures or bespoke jigs. For planners and technicians, the clamp provides a balance of durability and compactness that aids uptime and keeps toolroom logistics straightforward. Contact Metav Werkzeuge today for personalised advice on the Kukamet horizontal clamp 111 and to arrange prompt supply from our Emmerich quality hub — phone +49 2822 7131930, email info@metav-werkzeuge.com Technical Data SKU: B111-1-D-C2 GTIN: 8680731506921 Brand: Kukamet Category: Clamp (Spanner) ECLASS: 21041719 ETIM: EC011973 Facts Arm length: 93 mm Maximum holding force: 1,000 N Maximum clamping force: 850 N Angle: 90° Weight: 0.134 kg Special features Mounting: horizontal foot Material/finish: blackened finish Massive holding arm Lever clamp design Model designation: 111 FAQ What is the maximum holding and clamping force of this clamp? The Kukamet horizontal clamp 111 provides a maximum holding force of 1,000 N and a clamping force of 850 N, suitable for light to medium fixture applications. How is the clamp mounted in a fixture? Mounting is by a horizontal foot; the horizontal base is designed for secure attachment to jigs, plates or assembly benches. What are the key dimensions to consider for installation? Key dimensions: lever arm 93 mm, locking angle 90°, and a unit weight of 0.134 kg for layout planning. Is the surface finish suitable for workshop environments? The clamp has a blackened finish that gives basic protection against handling wear; for corrosive conditions, additional surface treatment or maintenance is recommended. Which applications is this clamp best suited for? The unit is intended for jigs, assembly fixtures and light production where compact, repeatable clamping and easy integration are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp Heavy-Duty Zinc-Plated Horizontal Foot, 1.75 kN Thrust / 2.6 kN Hold - Kukamet
Benefit from a compact, corrosion‑resistant clamp that combines a galvanised finish with a solid arm for reliable rigidity and repeatable fixture performance; order the Horizontal clamp 141 directly via Metav Werkzeuge or consult our technical advisers for application support. Horizontal lever clamp 141 by Kukamet — galvanised, solid‑arm horizontal base clamp The Horizontal lever clamp 141 is a 90° horizontal base clamp designed for secure, repeatable workholding in jigs and fixtures across general workshop and light industrial applications. Galvanised steel finish for corrosion resistance Solid arm design for high rigidity Holding force up to 2,600 N Clamping force up to 1,750 N Reliable clamping for repeatable fixture work The clamp delivers a defined clamping force of up to 1,750 N and a holding force of up to 2,600 N, values that ensure components remain stationary during machining and assembly. The forces are given in newtons (N) to allow straightforward comparison with technical requirements; clamping force denotes the applied pressure on the workpiece, while holding force indicates the static retention capability once the lever is engaged. The combination of a solid arm and a robust mechanism reduces deflection under load, which directly supports higher process reliability and consistent quality in repetitive production runs. Fast integration into horizontal fixtures and jigs Configured with a horizontal base mounting and a 90° orientation, this clamp is intended for integration into flat fixture plates and modular tooling systems. Its compact mass—approximately 0.5 kg—keeps the added weight on the fixture low while preserving rigidity, simplifying layout calculations and reducing the need for heavy supporting structures. The galvanised surface protects against corrosion in workshop environments, extending service intervals and preserving repeatability over time. Where quick setup and repeatable positioning are priorities, this type of lever clamp provides an efficient mechanical solution without complex actuation. Durability and maintenance advantages that reduce downtime Constructed from galvanised steel and featuring a massive arm, the design focuses on longevity and low upkeep. A corrosion‑resistant finish minimises surface degradation, while the sturdy arm reduces wear on contact points, lowering the frequency of replacements. For workshop managers aiming to keep fixtures operational with minimal intervention, the robust construction translates into fewer interruptions and predictable maintenance cycles. The straightforward lever operation supports rapid manual cycles and can be combined with existing clamping patterns to speed changeovers and increase machine utilisation. Contact Metav Werkzeuge for tailored advice on fixture integration and secure the Kukamet horizontal lever clamp 141 for durable, repeatable workholding in your production process. Technical data Article number: 141-4 GTIN: 8682843520161 Manufacturer: Kukamet SKU: 141-4 ECLASS: 21041719 ETIM: EC011973 Facts Weight: 0.5 kg Clamping force: 1,750 N Holding force: 2,600 N Angle: 90° Special features Material: galvanised steel Mounting: horizontal base Design: solid (massive) arm Category: clamp (spanner) FAQ What materials is this clamp suitable for? The Horizontal lever clamp 141 is manufactured in galvanised steel and is suitable for general fixture use; material compatibility depends on the workpiece and fixture design rather than the clamp itself. How are the force figures defined for this clamp? Clamping force (1,750 N) refers to the pressure applied to the workpiece during engagement; holding force (2,600 N) is the static retention capability when the lever is locked, both stated for the Horizontal lever clamp 141 by Kukamet. Is the clamp suitable for modular fixturing plates? Yes—its horizontal base mounting and 90° orientation are intended for integration into flat fixture plates and modular tooling systems. What maintenance is required to preserve performance? Periodic inspection for wear at contact points and ensuring the galvanised finish remains intact are recommended; the solid arm design reduces maintenance frequency for the Kukamet clamp. Can the clamp be used in corrosive environments? The galvanised finish offers basic corrosion resistance suitable for typical workshop conditions; for aggressive environments, consider additional protective measures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp Heavy-Duty Zinc-Plated Three-Point Fast Action, 1,750 N Thrust / 2,600 N Hold - Kukamet
Take advantage of a galvanised, solid-arm design and precise 90° mounting to secure workpieces reliably. The combination of robust construction, clear force ratings and compact weight supports consistent fixture performance — order the Horizontal clamp 142 directly via Metav Werkzeuge or consult our specialists if required. Horizontal clamp 142 — Kukamet horizontal lever clamp, galvanised, 90° mounting A robust Horizontal clamp 142 for fixture and jig applications, engineered to lock workpieces with defined clamping and holding forces in welding, assembly and general workshop fixtures. Galvanised finish for corrosion resistance Solid arm construction for high rigidity 90° horizontal base for secure fixture mounting Clamping force 1,750 N – holding force 2,600 N Reliable holding where precision counts The clamp is manufactured with a galvanised surface to resist corrosion in workshop environments and features a solid arm that reduces flex under load, improving positional stability. For production jigs and assembly stations, consistent component placement is essential; the specified force figures make the performance predictable and measurable. Explaining the numbers: the 1,750 N value denotes the maximum clamping force generated by the lever mechanism, while the 2,600 N rating indicates the static holding capacity once the clamp is engaged — both values aid in selecting the right fixture solution for a given workpiece. Designed for repeatable workflows and straightforward integration The horizontal base with a fixed 90° orientation simplifies integration into bespoke fixtures and modular tooling racks. The lever-operated mechanism enables rapid engagement and release, supporting short cycle times in repetitive tasks. Lightweight yet sturdy, at 0.39 kg, the device minimises added mass on moving fixtures and is easily mounted using the horizontal-foot configuration. The clamp’s defined mechanical properties reduce setup variation, which in turn helps to cut rework and maintains consistent throughput in serial operations. Compact workshop solution with transparent specification Engineered as a practical, no-frills toggle clamp, the unit suits welding jigs, assembly benches and inspection fixtures where a secure, repeatable hold is required. Corrosion protection and a robust arm construction extend service life in demanding environments; maintenance needs are limited to regular inspection and lubrication of pivot points. Supplied under the Kukamet name, the component fits into broader tooling strategies where clear, comparable technical data supports purchasing decisions and process planning. Contact Metav Werkzeuge today to discuss the Kukamet Horizontal clamp 142 for your fixture needs or to request stock and technical information directly from our Emmerich location. Technical data Article number: 142-4 GTIN: 8682843520185 Brand: Kukamet Facts Weight: 0.39 kg Clamping force max: 1,750 N Holding force max: 2,600 N Angle: 90° ECLASS: 21041719 ETIM: EC011973 Special features Galvanised material Solid arm design Horizontal foot mounting Lever-operated toggle clamp Compact workshop clamp FAQ What materials is this clamp suitable for? The Kukamet horizontal clamp 142 is a general-purpose lever clamp designed for standard workshop materials; suitability depends on the specific workpiece and fixture design, with the force ratings provided for selection guidance. How should the clamping and holding forces be interpreted? Clamping force (1,750 N) refers to the force applied by the lever during engagement; holding force (2,600 N) refers to the maximum static resistance when the clamp is closed. Can the clamp be used in welding fixtures? Yes, the galvanised finish and solid-arm construction make the clamp appropriate for welding and assembly jigs where a reliable, repeatable hold is required. Is the clamp easy to integrate into modular fixtures? The 90° horizontal base and compact form factor allow straightforward mounting in bespoke or modular fixture systems; the lightweight design reduces added mass on moving parts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp Lever Action 2.3 kN Hold 2.5 kN Zinc Plated - Kukamet
The combination of a compact, galvanised body with a 2,300 N clamping force and a secure horizontal foot mounting ensures reliable, repeatable workholding in production and jigs. Order the clamp directly via Metav Werkzeuge or request further technical clarification from the consultants in Emmerich. 111 Horizontal Toggle Clamp — galvanised finish, horizontal foot (Kukamet) A 111 Horizontal Toggle Clamp designed for secure, repeatable clamping in jigs, fixtures and assembly stations where a compact, robust lever clamp is required Horizontal foot mounting for stable attachment Galvanised finish for corrosion resistance 2,300 N clamping force and 2,500 N holding force Consistent clamping where it matters The 111 provides a defined 2,300 N clamping force with a measured holding capacity of 2,500 N, delivering predictable contact pressure for repetitive operations. The lever-action mechanism converts manual input into a stable locking position, reducing setup variance and improving process repeatability. The spindle is specified as M8x50, allowing fine adjustment of contact position; the compact body and the horizontal base simplify integration into fixtures and jigs on production lines. Space-saving design with robust fixing A low-profile layout and the horizontal foot mounting make the clamp suited to confined workspaces and multi-clamp assemblies. The galvanised surface finish offers basic corrosion protection for workshop environments where occasional exposure to humidity or coolant mist occurs. With a small mass of 0.34 kg, the clamp minimises added load on assemblies and enables placement where larger clamps would be impractical, keeping tooling setups compact without sacrificing stability. Simple mechanics for dependable operation The lever clamping principle provides an easily serviceable and clearly understandable mechanism: when the lever is engaged, the toggle locks in position and resists opening under load. This mechanical locking reduces the need for continuous monitoring in repetitive tasks and supports rapid workpiece changeover. The robust holding figures demonstrate suitability for light- to medium-duty clamping tasks in assembly, maintenance and fixture work. Integration and workshop logistics Designed for fast installation, the clamp’s horizontal foot allows straightforward bolting to benches, plates or fixture blocks. Identification data such as SKU 111-3 and GTIN 8680731500134 facilitate inventory and procurement processes. Delivered as a galvanised unit with the declared spindle specification, the clamp fits standard workshop procedures and maintenance practices, supporting efficient asset management and clear replacement planning. Contact Metav Werkzeuge today for procurement and technical advice on the Kukamet 111 horizontal toggle clamp — available from the Emmerich quality hub; phone +49 2822 7131930 or info@metav-werkzeuge.com Technical data SKU: 111-3 GTIN: 8680731500134 Model: 111 ECLASS: 21041719 ETIM: EC011973 Core specifications Clamping force: 2,300 N Holding force: 2,500 N Angle: 90° Weight: 0.34 kg Spindle: M8x50 Materials & features Galvanised finish Horizontal foot mounting Lever/toggle action No additional special features specified FAQ What clamping and holding forces does this clamp provide? The Kukamet 111 horizontal toggle clamp (SKU 111-3) delivers a clamping force of 2,300 N and a holding force of 2,500 N for repeatable workholding. How is the clamp mounted in fixtures? Mounting is via the horizontal foot, which enables direct bolting to plates, fixture blocks or workbenches for stable attachment. What spindle adjustment is available for set-up? Adjustment is provided by the M8x50 spindle, permitting fine positioning of the contact point to suit different workpiece profiles. Is the finish suitable for workshop environments? The galvanised finish offers corrosion resistance suitable for general workshop and assembly applications where occasional humidity or coolant exposure occurs. How compact is the clamp for multi-station systems? With a weight of 0.34 kg and a low-profile horizontal design, the clamp is well suited to multi-clamp arrays and confined fixture layouts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp M10x70, 3.5 kN Clamping Force, Blackened Finish - Kukamet
Take advantage of a compact, high‑force clamping solution that combines reliable holding performance with simple mounting and low weight for flexible fixture use. Order the clamp directly via Metav Werkzeuge or consult the Metav team for specification support and rapid supply. Horizontal clamp 111 — horizontal foot mount, 3,500 N clamping force (Kukamet) The Horizontal clamp 111 is a compact lever clamp designed for secure workholding where a horizontal foot and a 90° clamping orientation are required, suitable for fixtures and jigs in small to medium production runs. Horizontal foot for secure mounting 3,500 N maximum clamping force 3,650 N holding force Blackened finish resists wear Reliable holding for repeatable production results The lever design delivers a measurable and consistent clamping force of 3,500 N with a holding force of 3,650 N, values that support repeatable positioning and vibration resistance in assembly or machining jigs. This performance reduces rework and inspection time by offering stable part retention during intermittent operations. Reporting of these forces provides a rational basis for selecting the correct workholding component for a given application and supports process standardisation on the shop floor. Practical installation and straightforward operation Mounting is achieved via a horizontal foot, allowing direct attachment to flat fixture plates or workbenches. The device is equipped with an M10x70 spindle, indicating an M10 thread with a 70 mm spindle length that permits easy adjustment of workpiece height and contact pressure. The 90° actuation keeps the handle clear of neighbouring operations, while the toggle action secures the clamped part without continuous manual force. These design choices translate into faster job changeovers and reduced operator effort during repetitive tasks. Robust finish and compact build for daily workshop use Finished in a blackened finish that improves corrosion resistance and conceals wear marks, the clamp combines durability with a compact design and a weight of 0.81 kg, making it simple to integrate into portable fixtures or dense fixture layouts. The lever mechanism is engineered for low maintenance; occasional lubrication of pivot points is sufficient to maintain long service life. The straightforward construction supports economical replacement and keeps downtime minimal, contributing to steady throughput and predictable machine availability. For specification advice or to secure supply of the Kukamet Horizontal clamp 111 from Metav Werkzeuge — with fast dispatch from Emmerich and technical guidance on fixture integration — contact Metav Werkzeuge by email or phone today Technical data SKU: B111-4 GTIN: 8680731503784 ECLASS: 21041719 ETIM: EC011973 Model: 111 Manufacturer: Kukamet Facts Maximum pressing force: 3,500 N Maximum holding force: 3,650 N Angle: 90° Spindle: M10x70 Weight: 0.81 kg Special features Horizontal foot mounting Blackened finish Lever clamp design No additional special features noted FAQ What clamping and holding forces does this clamp provide? The Kukamet horizontal clamp 111 provides a clamping force of 3,500 N and a holding force of 3,650 N, values suitable for reliable retention in many jigs and fixtures. How is the clamp mounted and adjusted on a fixture? Mounting is via the horizontal foot; adjustment is made with the M10x70 spindle on the Horizontal clamp 111, which allows fine setting of the contact position and pressure. Is the finish suitable for workshop use? Yes, the clamp features a blackened finish that increases resistance to wear and surface corrosion, helping to maintain appearance and function in daily use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp M12x80, 4.5 kN Closing Force, Black Oxide Finish - Kukamet
A compact, right-angle clamping solution that combines 4,500 N clamping force, an adjustable M12x80 spindle and a corrosion-resistant finish for reliable fixture work. The clamp supports secure holding up to 5,000 N and is supplied ready for straightforward integration; order directly via Metav Werkzeuge or consult our specialists for application advice. 133 Horizontal clamp (Kukamet) — M12x80 spindle, 90° right-angle clamp A 133 horizontal clamp designed for secure right-angle workholding in jigs, fixtures and production tooling. 4,500 N clamping force capacity 5,000 N holding resistance Angled foot for rigid 90° mounting Blackened, burnished corrosion-resistant finish Secure, measurable clamping performance for production use The clamp delivers a clear, quantifiable performance: 4,500 N clamping force and 5,000 N holding resistance. Clamping force refers to the applied compressive force that secures a workpiece, while holding resistance denotes the clamp’s ability to resist pull-out under load. This distinction matters for fixture design because a higher holding resistance reduces the risk of displacement during machining or assembly. The robust force figures translate into stable workholding for repetitive cycles and medium-duty metalworking tasks. Simple integration and precise adjustment for fixtures Mounting is facilitated by the angled foot that fixes the clamp at a true 90° orientation, enabling repeatable right-angle positioning in assemblies and jigs. The M12x80 pressure spindle provides fine adjustment of clamping height and compensates for varying workpiece thickness, while the moderate mass of 1.191 kg keeps the unit compact for dense fixture arrays. Installed as a lever-style clamp, the device is compatible with standard bench and fixture plates, allowing straightforward retrofit into existing tooling layouts. Durable finish and low-maintenance operation for daily use The component is finished in a blackened, burnished finish, offering surface protection against corrosion and reduced light reflection in workshop environments. The lever clamping principle minimises moving parts exposed to chips and coolant, which reduces maintenance intervals and supports consistent clamping over time. Built for professionals, the unit is suitable for industrial jigs, small-series production and repair benches that demand dependable, low-maintenance workholding. Contact Metav Werkzeuge for expert advice and reliable supply of the Kukamet 133 horizontal clamp — direct dispatch from Emmerich and tailored specification support Technical data SKU: B133-5 GTIN: 8680731507591 Article: Horizontal clamp 133 eClass: 21041719 ETIM: EC011973 Facts Clamping force max: 4,500 N Holding resistance max: 5,000 N Weight: 1.191 kg Angle: 90° Pressure spindle: M12x80 Special features Angled foot mounting Blackened, burnished finish Lever clamp style No additional special features stated FAQ What clamping and holding forces does the clamp provide? The Kukamet 133 horizontal clamp offers a maximum clamping force of 4,500 N and a holding resistance of 5,000 N, giving measurable security for medium-duty fixture tasks. How is the clamp mounted and positioned at 90°? Mounting is via an angled foot that secures the unit in a 90° orientation; the design of the Kukamet 133 horizontal clamp facilitates repeatable right-angle installation in jigs and fixtures. Is the spindle adjustable for different workpiece thicknesses? Yes, the M12x80 pressure spindle on the Kukamet 133 horizontal clamp allows fine height adjustment to accommodate varying material thicknesses and to set precise clamping travel. What surface protection does the clamp have? The unit is supplied with a blackened, burnished finish, which reduces corrosion risk and surface glare while supporting a low-maintenance service life for the Kukamet 133 horizontal clamp. Which applications are most suitable for this clamp? The clamp is intended for jigs, fixtures and production tooling in workshops and light to medium industrial use where reliable right-angle clamping and repeatable positioning are required; the Kukamet 133 horizontal clamp is a practical choice for such tasks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp M12x80, 4.5 kN Closing Force, Zinc-Plated, 1.52 kg - Kukamet
Take advantage of a compact, galvanised design combined with a high holding force of 5,000 N and a reliable pressing force of 4,500 N for consistent fixture performance. The robust vertical-foot mounting and the M12x80 spindle ensure quick integration into workshop fixtures. Order the clamp directly via Metav Werkzeuge or consult our specialists for application guidance. Kukamet Horizontal lever clamp 112 — galvanised, 5,000 N holding force Kukamet Horizontal lever clamp 112 is a compact horizontal clamp designed for secure fixturing in confined workstations and light to medium machining tasks. Galvanised steel construction 5,000 N holding force Vertical-foot mounting M12x80 spindle included Reliable clamping in limited spaces The horizontal lever clamp delivers a predictable clamping result where footprint matters. With a holding force of 5,000 N and a maximum pressing force of 4,500 N, the device keeps components steady during assembly and machining, reducing rework. Its compact mass of 1.52 kg supports quick handling and simple fixture changes, while the low-profile design preserves workspace around the workpiece. This balance of force and size supports higher throughput without compromising stability. Built to endure everyday workshop demands Constructed from galvanised steel, the clamp resists surface corrosion and withstands the mechanical demands of regular use. The vertical-foot mounting allows firm attachment to plates and bases, producing a rigid clamping point that minimises vibration and slippage. The lever mechanism is designed for repeated cycles, providing reliable repeatability and long service life, which reduces downtime and maintenance interventions in production environments. Straightforward installation and clear specifications The clamp features an M12x80 spindle, enabling straightforward integration with common threaded fixtures and accessories. A fixed 90° operating angle provides predictable movement and easy alignment in existing jigs. Technical clarity—stated forces, weight and mounting method—simplifies selection for engineers and purchasers, ensuring compatibility with production processes and fixture designs. Specification-driven choice supports rational decisions and predictable machine shop outcomes. For secure, compact clamping solutions request the Kukamet horizontal lever clamp 112 through Metav Werkzeuge for tailored application advice and assured delivery — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 112-5 GTIN: 8680731500646 SKU: 112-5 Facts Weight: 1.52 kg Holding force: 5,000 N Max pressing force: 4,500 N Angle: 90° Spindle: M12x80 Special features Material: galvanised steel Mounting: vertical foot Arm: not applicable Category: Spanner Brand: Kukamet eClass: 21041719 ETIM: EC011973 Catalogue PDF: 112-katalogseite.pdf FAQ What materials can this clamp be used with? The Kukamet horizontal lever clamp 112 is suitable for general workshop use where a robust mechanical clamp is required; selection should consider component geometry and fixture design rather than material limitations. How is the clamp mounted to a fixture? Mounting is via the vertical foot; the clamp is designed to be fixed to a base plate and used with the M12x80 spindle for secure attachment. What maintenance is required to preserve performance? Routine inspection for wear and ensuring the galvanised surfaces remain clean will maintain performance; lubricate moving parts where appropriate to extend service life. Is the clamp suitable for high-cycle production use? Yes. The lever mechanism and construction are intended for repeated clamping cycles in light to medium production environments; confirm compatibility with specific cycle rates during planning. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp M4x25 Quick-Action Metal Handle, 450 N Thrust / 520 N Hold - Kukamet
Combining a zinc-plated finish with a compact horizontal foot and measurable clamping performance, this clamp offers robust, repeatable workholding for small fixtures and assembly tasks. Benefit from a clamping force of 450 N and a holding force of 520 N for secure fixation and reduced rework. Order the horizontal clamp directly via Metav Werkzeuge or ask the consultants for application advice. Horizontal clamp 111 by Kukamet — zinc-plated with 450 N clamping force Horizontal clamp 111 is a compact horizontal toggle clamp for secure fixturing in workshop, assembly and light production environments. Zinc-plated corrosion resistance Clamping force 450 N Holding force 520 N Metal handle for durable operation Measurable force for confident clamping The clamp delivers a clamping force of 450 N and a holding force of 520 N, figures that make it straightforward to plan fixtures with predictable results. The distinction between clamping and holding force is important: the first is the active force applied during locking, the second is the residual force keeping a workpiece in place. Specified forces allow accurate selection for tasks such as short-run assembly, jigs, and manual machining operations, reducing the risk of slippage and helping to minimise scrap rates. Built to withstand everyday use A zinc-plated finish protects the component against corrosion in workshop atmospheres, while the metal handle ensures long service life under repeated operation. The horizontal foot mounting keeps the clamp low-profile on the fixture plate, saving valuable space and enabling closer part spacing on fixtures. These design elements combine to deliver dependable performance in demanding day-to-day use, supporting consistent results across batches without frequent maintenance. Simple integration and clear mechanics The clamp features an M4x25 spindle, enabling fine height adjustment of the contact point and straightforward alignment with bespoke jig geometries. Its lever clamp design gives rapid engagement and release, shortening cycle times during manual operations and aiding operator ergonomics. At just 0.042 kg, the unit is lightweight to handle during assembly yet designed to provide a secure hold once installed, simplifying retrofits to existing fixtures and reducing downtime during tool changes. For a practical and reliable workholding solution from Kukamet, contact Metav Werkzeuge in Emmerich for tailored advice and to secure prompt delivery to the workshop Technical data Article number: 111-0-M GTIN: 8680731500011 ECLASS: 21041719 ETIM: EC011973 Brand: Kukamet Facts Clamping force (max): 450 N Holding force (max): 520 N Weight: 0.042 kg Angle: 90° Spindle: M4x25 Special features Zinc-plated finish Metal handle Horizontal foot mounting Lever clamp design Suitable for fixtures and assembly jigs FAQ What is the difference between clamping force and holding force? Clamping force refers to the active force applied when the clamp is engaged; holding force is the residual securing force once the clamp is locked. The Horizontal clamp 111 lists both values (450 N clamping, 520 N holding) so fixture designers can assess suitability. Which materials can be used with this clamp? The clamp itself is zinc-plated and intended to secure workpieces made from metals or plastics commonly used in assembly and light machining; selection should be based on the workpiece geometry and the specified forces of the Horizontal clamp 111. How is the clamp mounted to a fixture plate? Mounting uses the horizontal foot configuration; the clamp is designed for low-profile attachment to fixture plates to enable close part spacing and simple integration into existing jigs. Is the handle suitable for frequent operation? Yes, the metal handle provides durable operation for repeated engagement and release, making the clamp appropriate for assembly lines and manual production tasks. Can the contact point be adjusted to match different part heights? Adjustment is achieved via the M4x25 spindle, permitting fine alignment of the contact point to ensure consistent clamping across varying workpiece heights and tolerances. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp M6x40, 1,000 N Thrust / 1,200 N Holding Force, Black Oxide - Kukamet
Take advantage of robust 1,000 N clamping and 1,200 N holding force in a compact, low-mass horizontal lever clamp; the combination supports repeatable fixtures and uncomplicated integration on jigs. Order directly via Metav Werkzeuge or consult the specialist team for application advice. Horizontal Clamp 111 — Kukamet horizontal lever clamp with 1,000 N clamping force Horizontal Clamp 111 is a compact horizontal lever clamp engineered for secure workpiece holding in fixtures, jigs and small production rigs Compact blackened finish 1,000 N clamping force 1,200 N holding force Horizontal foot mounting Secure clamping for repeatable setups The Horizontal Clamp 111 delivers a measurable increase in fixture reliability thanks to its 1,000 N clamping and 1,200 N holding capacities. These figures mean fewer shifting incidents during machining or assembly, reducing rework and improving throughput. The clamp’s straightforward lever action converts operator input into consistent clamping pressure, supporting repeatable setups and steady cycle times. Emphasis on technical reproducibility makes it suited to both workshop jigs and small-scale production lines. Compact mounting that saves space and time Integration into existing fixtures is simplified by the horizontal foot mounting and the right-angled configuration; the clamp occupies minimal footprint while presenting a clear clamping direction at 90°. The pressure spindle is specified as M6x40, enabling standardised interfacing with threaded elements in bespoke fixtures. Weighing just 0.225 kg, the unit minimises added mass on moving assemblies and is therefore easy to position during installation and maintenance, supporting quicker assembly and fewer alignment steps. Robust finish and low-maintenance operation A blackened finish provides corrosion resistance and an unobtrusive appearance for workshop environments, while the simple lever design reduces the number of wear points. The clamp’s construction focuses on longevity and predictable behaviour rather than superfluous features; this straightforward approach keeps maintenance intervals longer and replacement parts minimal. For users seeking dependable clamping without complex servicing, the compact lever clamp offers a practical balance between durability and operational simplicity. Choose the Kukamet Horizontal Clamp 111 for secure, repeatable clamping — contact Metav Werkzeuge in Emmerich for tailored advice and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: B111-2 GTIN: 4061905075353 Model: 111 Brand: Kukamet Category: Clamp (Spanner) Measurements & performance Clamping force (max): 1,000 N Holding force (max): 1,200 N Weight: 0.225 kg Angle: 90° Pressure spindle: M6x40 Design & features Finish: blackened finish Mounting: horizontal foot Design: horizontal lever clamp Special feature: none FAQ What are the clamping and holding forces of this clamp? The Horizontal Clamp 111 provides a clamping force of 1,000 N and a holding force of 1,200 N, suitable for repeatable jigs and fixture applications. How is the clamp mounted and aligned in a fixture? Mounting is via a horizontal foot with a fixed 90° orientation; the unit uses an M6x40 pressure spindle for standard threaded interfacing. What finish and weight can be expected? The clamp has a blackened finish for improved corrosion resistance and weighs 0.225 kg, keeping added mass on assemblies low. Is this clamp suited to small production rigs and assembly jigs? Yes, the compact lever design and defined clamping values make it appropriate for small production rigs, assembly jigs and fixture applications requiring repeatability. Which product identifiers are relevant when ordering spare parts or referencing the item? Refer to SKU B111-2, Model 111 and GTIN 4061905075353 for order and documentation purposes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp Quick-Action Three-Point Clamp, Metal Handle, Zinc-Plated, 450 N Thrust / 520 N Hold - Kukamet
Take advantage of the combination of compact design, reliable clamping performance and corrosion protection for consistent fixture results. Order the clamp directly via Metav Werkzeuge or request technical advice from their consultants if required. Kukamet Horizontalspanner 112 — lever clamp with vertical foot and galvanised finish The Kukamet Horizontalspanner 112 is a compact lever clamp designed for securing workpieces in jigs and fixtures where a 90° mounting orientation is required. Galvanised steel body for corrosion resistance 450 N clamping force for reliable fixation 520 N holding force maintains secure grip Vertical foot with 90° angle for fixture mounting Consistent fixation through measured forces The clamp delivers defined clamping force and holding force, specified at 450 N and 520 N respectively, which translates into predictable performance in repetitive operations. Measured values enable planners to calculate fixture loads and select suitable fastenings, while the integrated M4x25 spindle provides fine pressure adjustment. The result is a secure mechanical connection that reduces slippage and supports repeatable cycle times in assembly or machining fixtures. Quick mounting and durable operation for busy workshops A vertical foot with a fixed 90° angle simplifies integration into standard plates and mating components, minimising setup time for fixture production. The galvanised finish offers basic corrosion protection for everyday workshop environments, and the metal handle withstands frequent actuation. With a lightweight construction of about 0.042 kg, the clamp can be placed without overloading light jigs while still providing solid mechanical resistance. Suited to repetitive tasks and straightforward maintenance The lever-style mechanism is optimised for frequent engagement and disengagement, ensuring rapid clamping action and consistent part location. Simple mechanical design means maintenance is limited to occasional inspection and lubrication of moving parts rather than complex servicing. This straightforward reliability supports continuous production runs and reduces unexpected downtime, making the clamp a pragmatic choice for toolrooms and small-series manufacturing. Request availability or a technical datasheet from Metav Werkzeuge for the Kukamet Horizontalspanner 112; contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt service from Emmerich Technical data Article number: 112-0-M GTIN: 8682843520116 Brand: Kukamet ECLASS: 21041719 ETIM: EC011973 Key figures Clamping force: 450 N Holding force: 520 N Weight: 0.042 kg Angle: 90° Materials & features Galvanised steel M4x25 pressure spindle Vertical foot (senkrechter Fuß) Metal handle Lever clamp design SKU: 112-0-M FAQ What mounting configuration does the clamp require? The clamp is supplied with a vertical foot and a fixed 90° orientation, allowing direct mounting into fixture plates or jigs where a perpendicular clamping action is required. What are the specified forces and what do they mean? Clamping force (450 N) refers to the applied pressure for securing a workpiece, while holding force (520 N) indicates the static retention capacity; both values are stated for the Kukamet Horizontalspanner 112 to aid in fixture planning. Which spindle size is provided for pressure adjustment? The pressure spindle is M4x25, enabling fine adjustment of contact pressure and simple replacement if necessary. How resistant is the clamp to workshop conditions? The component is galvanised for basic corrosion protection and features a metal handle suited to frequent actuations, supporting everyday workshop use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp Vertical Base M10x70 Bolt, 3.65 kN Hold, Zinc-Plated - Kukamet
Take advantage of the combination of galvanised construction and a 3,500 N clamping force for secure, repeatable fixture work and long service life. Order the horizontal clamp directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal toggle clamp 112 — Kukamet (galvanised, 3,500 N) The Horizontal toggle clamp 112 is a horizontal clamping device designed for fixtures and jigs, delivering a 90° toggle action for fast and reliable workpiece securing. Galvanised steel for corrosion resistance 3,500 N clamping force at 90° toggle Vertical foot mounting for stable fixing Adjustable M10x70 pressure spindle Proven holding power for demanding fixtures The clamp provides a 3,500 N clamping force with a holding force of 3,650 N, offering a dependable hold during machining, assembly and welding tasks. High measured force values translate directly into process reliability: components remain immobile under load, reducing rework and downtime. The robust toggle mechanism ensures consistent performance cycle after cycle, which supports efficient production runs and predictable quality outcomes. Corrosion resistance and long service life Constructed from galvanised steel, the unit resists workshop humidity and routine exposure to oils and coolants, extending service intervals and reducing replacement rates. The corrosion protection combined with a compact mass of 0.81 kg results in a durable yet lightweight clamping element that integrates into existing tooling without adding unnecessary bulk. The material choice offers a practical route to long-term cost-efficiency through lower maintenance needs. Quick mounting and simple adjustment for jigs Designed with a vertical foot mounting, the clamp sits securely on a base plate or fixture plate and aligns neatly within tight layouts. The M10x70 pressure spindle is adjustable; this denotes an M10 threaded spindle with a 70 mm length, enabling fine setting of clamping height and contact pressure for different workpiece geometries. The 90° toggle action gives a low-profile clamped position, making the device suitable for repetitive, ergonomic operation in production and assembly environments. Contact Metav Werkzeuge today for application support and to secure the Kukamet horizontal toggle clamp 112 with proven 3,500 N clamping performance — call +49 2822 7131930 or email info@metav-werkezeuge.com Technical data Article number (SKU): 112-4 GTIN: 8680731500561 Brand: Kukamet Facts Clamping force: 3,500 N Holding force: 3,650 N Weight: 0.81 kg Angle: 90° Pressure spindle: M10x70 Materials & special features Material: Galvanised steel Mounting: Vertical foot Model: Horizontal toggle clamp 112 ECLASS: 21041719 ETIM: EC011973 FAQ What clamping and holding forces does this clamp provide? The clamp delivers a clamping force of 3,500 N and a holding force of 3,650 N, providing secure retention during machining and assembly operations. Is the finish suitable for humid or mildly corrosive workshop environments? The galvanised finish offers enhanced corrosion resistance for standard workshop conditions, making the clamp well suited to environments where occasional exposure to coolant or moisture occurs. How is the clamp mounted and adjusted? Mounting is by a vertical foot. Adjustment of the contact point is via the M10x70 pressure spindle (M10 thread, 70 mm length) for precise clamping height and contact pressure. Which applications are typical for this type of clamp? Common uses include jigs, welding fixtures, assembly stations and repeatable workholding tasks where a low-profile, reliable horizontal toggle clamp is required. What is the product reference for ordering or specification? Reference the Kukamet horizontal toggle clamp 112, SKU 112-4, when enquiring or ordering to ensure the correct model is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com