Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
90° Horizontal Clamp Vertical Base Stainless Steel 450 N Thrust, 520 N Hold - Kukamet
Take advantage of the combination of compact design, stainless steel durability and reliable clamping forces for repeatable fixture work. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal clamp 112 — Kukamet lever clamp in stainless steel, 90° action Horizontal clamp 112 is a compact lever clamp designed for secure 90° positioning and fixed mounting in jigs and fixtures, offering robust holding and clamping capacity for repetitive production tasks Stainless steel construction Vertical-foot mounting for fixed setup Holding force 520 N for secure clamping M4x25 pressure spindle, 90° lever angle Precision clamping that keeps processes steady The compact lever design provides a consistent clamping force that reduces variation between cycles, supporting predictable production outcomes. With a holding force of 520 N and a maximum clamping (pressing) force of 450 N, the device is suited to small assemblies and verification fixtures where reliable retention is required. The stainless construction ensures resistance to corrosion in workshop environments, while the 90° lever geometry gives a low-profile clamping action that integrates easily into tight fixture spaces. This combination of force values and mechanical simplicity contributes directly to process stability and lower reject rates. Simple integration for compact fixtures and jigs Thanks to the vertical-foot mounting, installation onto plates and tooling bases is straightforward and repeatable, making the clamp well suited for series production and manual assembly stations. At just 0.042 kg, the unit adds minimal mass to sub-assemblies and can be positioned without affecting delicate workpieces. The M4x25 pressure spindle provides a fine mechanical interface for adapting contact pressure, enabling precise setting of clamp travel without complex adjustments. For engineers specifying small-scale clamping elements, this lever clamp offers a compact footprint while preserving functionality expected from larger devices. Durable materials and low-maintenance operation Constructed from stainless steel, the clamp resists surface wear and provides a service life that supports continuous operation with minimal upkeep. The straightforward mechanical design means fewer wearing parts and easier inspection intervals compared with more complex clamping solutions. The M4x25 spindle is a commonly sized component, simplifying replacement should normal wear occur. Where longevity and predictable maintenance schedules matter, the combination of robust material choice and simple mechanical architecture reduces downtime and total cost of ownership over the lifetime of the fixture. Contact Metav Werkzeuge for application guidance and to secure the Kukamet Horizontal clamp 112; call +49 2822 7131930 or email info@metav-werkzeuge.com for detailed specifications and ordering support Technical data SKU: S112-0 GTIN: 8682843523247 Manufacturer: Kukamet eClass: 21041719 ETIM: EC011973 Facts Max clamping force: 450 N Max holding force: 520 N Angle: 90° Weight: 0.042 kg Special features Material: Stainless steel Mounting: Vertical foot Pressure spindle: M4x25 Special features: none FAQ What material is the clamp made from and why does it matter? The Kukamet Horizontal clamp 112 is made from stainless steel, which offers corrosion resistance and long service life in workshop and industrial environments. What clamping and holding forces does the unit provide? The clamp provides a maximum clamping (pressing) force of 450 N and a maximum holding force of 520 N, giving a reliable retention range for small fixtures and assemblies. How is the clamp mounted to a fixture plate? Mounting is by a vertical foot arrangement; the vertical-foot mounting enables fixed, repeatable installation on plates and bases. What is the specification of the pressure spindle and is it replaceable? The pressure spindle is M4x25; standard sizing allows for straightforward replacement or adjustment as part of routine maintenance for the Kukamet clamp S112-0. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp Vertical Base Zinc Plated, 450 N Thrust / 520 N Hold - Kukamet
Take advantage of the combination of compact design, reliable clamping force and corrosion-resistant finish for steady fixture performance; order directly via Metav Werkzeuge or consult our specialists for application advice. 112 Horizontal lever clamp by Kukamet — 450 N clamping force, zinc-plated The 112 is a compact horizontal lever clamp intended for secure, repeatable workholding in jigs and fixtures across light industrial and workshop environments. Zinc-plated corrosion resistance 450 N clamping force 520 N maximum holding force Vertical foot for secure mounting Reliable clamping where space is limited The compact lever design delivers a 450 N clamping action with a 520 N maximum holding capability, making it suitable for short-cycle production and fixture use where repeatability matters. The low mass of 0.042 kg keeps added inertia minimal and enables dense placement of multiple clamps on a fixture plate. The clamping spindle is an M4x25 thread, permitting fine contact pressure adjustment and straightforward replacement without special tools. These characteristics reduce set-up time and support consistent machining tolerances. Simple mounting for consistent repeat performance Equipped with a vertical foot mounting, the device is designed for straightforward installation onto flat plates or subplates, providing a stable base for lateral clamping forces at a right angle. The fixed 90° lever orientation ensures predictable actuation and makes the component easy to integrate into existing jigs. The zinc-plated surface aids secure seating and helps prevent surface corrosion in normal workshop conditions, which contributes to long-term fixture reliability and fewer maintenance interventions. Durable finish and maintenance benefits The zinc-plated surface offers practical corrosion resistance for workshop environments without intensive maintenance demands. The simple mechanical construction minimises wear points and supports long operational life under regular use. Where replacement or adjustment is needed, the standard-thread pressure spindle and accessible mounting reduce downtime. These design choices combine to keep operating costs low while providing the repeatable performance expected in production and assembly settings. Choose Kukamet’s compact 112 horizontal lever clamp for dependable, space-saving workholding and contact Metav Werkzeuge for tailored supply and application guidance from Emmerich: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number: 112-0 GTIN: 8682843520109 SKU: 112-0 Facts Weight: 0.042 kg Angle: 90° Clamping force: 450 N Holding force: 520 N Pressure spindle: M4x25 Special features Material/coating: zinc-plated Mounting type: vertical foot Product type: horizontal lever clamp Brand: Kukamet FAQ What is the maximum clamping force and holding force? The clamp provides a clamping force of 450 N and a maximum holding force of 520 N for secure fixture holding with Kukamet’s horizontal clamp (SKU 112-0). How is the clamp mounted to a fixture? Mounting is via a vertical foot, designed to be fastened to a flat plate or subplate for stable lateral clamping action with the Kukamet 112. Can the contact pressure be adjusted? Yes, the contact pressure is adjustable via an M4x25 pressure spindle fitted to the lever clamp, allowing precise setting of workpiece contact. Is the finish suitable for workshop environments? The zinc-plated finish provides practical corrosion resistance suitable for typical workshop environments and reduces routine maintenance. Is this clamp suitable for dense fixture layouts? With a compact form and a weight of 0.042 kg, the clamp is suitable for close placement on fixture plates where space efficiency is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp Waagerechter Foot M12x80, 4.5 kN Thrust 5 kN Hold, Blackened - Kukamet
Reliable clamping, compact construction and straightforward integration ensure steady workholding for production and assembly tasks. Benefit from the combination of 4.5 kN clamping force and 5.0 kN holding force for repeatable results. Order the clamp directly via Metav Werkzeuge or ask our consultants if needed. Horizontalspanner 111 — horizontal toggle clamp, 4.5 kN clamping force (Kukamet) The Horizontalspanner 111 is a horizontal toggle clamp for secure workholding in jigs and fixtures across production and assembly environments. 4.5 kN clamping force 5.0 kN holding force Black blued finish Horizontal foot mounting Dependable clamping for consistent production The core advantage of this toggle clamp is its predictable clamping force and holding force, which translate directly into fewer setup errors and reduced rework. With a rated clamping force of 4.5 kN and a maximum holding force of 5.0 kN, the device secures components firmly during machining, assembly or inspection operations. The mechanical action of the toggle mechanism converts lever motion into a locked holding state, offering a reliable, vibration-resistant hold that supports repeatable cycle times and consistent quality outcomes. Space-saving design that fits jigs and fixtures A compact footprint and dedicated horizontal foot mounting make integration into bespoke fixtures straightforward. The unit weighs 1.52 kg, allowing it to be positioned on modular plates and small tooling stations without excessive load. The adjustable pressure spindle M12x80 permits fine tuning of clamping height and contact pressure, while the 90° clamping angle suits many common workpiece geometries. The black blued finish provides a basic protective surface and a low-reflective appearance that is practical in busy production environments. Easy setup and long service life Assembly and maintenance are simplified by the clamp’s robust mechanical design and accessible adjustment features. The pressure spindle and lever arrangement minimise the need for frequent retuning, supporting extended uptime in repetitive processes. Supplied as SKU B111-5, the unit is well suited to jigs, fixtures and bench-mounted applications where a horizontal toggle clamp is required. If there is uncertainty about fitment or technical details, the Metav team can provide additional product data or advise on integration and compatibility. Contact Metav Werkzeuge for tailored advice on Kukamet clamps — quote SKU B111-5 when enquiring to ensure the right configuration for the application; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: B111-5 GTIN: 8680731503791 Brand: Kukamet eClass: 21041719 ETIM: EC011973 Facts Clamping force: 4,500 N Holding force: 5,000 N Weight: 1.52 kg Angle: 90° Pressure spindle: M12 x 80 Special features Finish: black blued Mounting: horizontal foot Design: horizontal toggle clamp Special feature: none FAQ What clamping and holding forces does the clamp provide? The Horizontalspanner 111 (Kukamet) provides a clamping force of 4,500 N and a holding force of 5,000 N for secure workholding. How is the clamp fixed to a fixture or base plate? The clamp is intended for horizontal foot mounting at a 90° angle and is compatible with standard fixture plates. Can the clamping height be adjusted? Yes — the unit uses an M12x80 pressure spindle that allows adjustment of clamping height and fine control of contact pressure. Is the surface finish suitable for workshop use? The clamp features a black blued finish that offers basic surface protection and a practical appearance for production environments. What applications is this clamp best suited to? The horizontal toggle design and compact form make it suitable for jigs, fixtures and bench-mounted assembly or inspection tasks where consistent clamping is required. Which SKU should be quoted when ordering or enquiring? Quote SKU B111-5 (Horizontalspanner 111) to ensure the correct clamp specification is referenced. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 1,000 N Pull, 1,200 N Hold, Zinc Plated - Kukamet
Take advantage of the combination of robust zinc-plated finish, precise 1,000 N clamping force and compact installation for reliable fixturing in production environments; order directly via Metav Werkzeuge or consult the team for application advice. Horizontal clamp 111 — Kukamet horizontal toggle clamp with 1,000 N clamping force and zinc-plated finish The Horizontal clamp 111 is a compact horizontal toggle clamp designed for secure, repeatable holding in jigs and fixtures across workshop and light industrial applications. Compact lever clamp design Zinc-plated corrosion resistance 1,000 N clamping force Horizontal-foot mounting, 90° operating angle Consistent clamping performance for machining and assembly The clamp delivers a rated 1,000 N clamping force with a maximum holding force of 1,200 N, providing a reliable restraint for light to medium loads during machining, welding or assembly. The integrated M6x40 pressure spindle allows for fine height adjustment and consistent contact pressure, reducing variability between cycles. Specified forces refer to mechanical performance under standard conditions and are intended to support efficient cycle times and process stability in production jigs. Easy integration into fixtures, saving space and setup time With a horizontal foot mounting and a fixed operating angle of 90°, the unit integrates seamlessly into bench-mounted fixtures and modular clamping plates. The compact weight of 0.225 kg and simple fastening arrangement make retrofitting and replacement straightforward, while the lever-style actuation keeps the footprint small. These characteristics reduce fixture complexity and assist in achieving repeatable part positioning without extensive redesign of existing tooling. Durable finish and low-maintenance operation A zinc-plated finish protects the clamp against corrosion in humid workshop environments, lowering the frequency of part replacement and upkeep. The mechanical design is free of electronics and requires only periodic visual checks and light lubrication of pivot points, which supports long service intervals with minimal downtime. The lever concept provides tactile feedback during operation, helping operators identify proper locking position quickly and confidently. Application suitability and workplace benefits Designed as a general-purpose horizontal toggle clamp, the device suits small-batch production, prototype fixtures and school or training workshops where straightforward, dependable clamping is needed. The combination of adjustable pressure spindle and stable holding capacity supports consistent quality outcomes, helping to reduce rework and maintain throughput. Where simplicity and repeatability are priorities, this clamp offers a practical balance between performance and ease of use. Contact Metav Werkzeuge for project-specific recommendations on the Kukamet horizontal clamp 111 and to ensure rapid, reliable supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: 111-2 GTIN: 8680731500059 Brand: Kukamet eClass: 21041719 ETIM: EC011973 Core technical data Clamping force max: 1,000 N Holding force max: 1,200 N Weight: 0.225 kg Angle: 90° Pressure spindle: M6x40 Special features Zinc-plated finish Horizontal foot mounting Lever clamp design No additional special features specified FAQ What is the maximum clamping force of this clamp? The Kukamet Horizontal clamp 111 (SKU 111-2) provides a rated clamping force of 1,000 N and a maximum holding force of 1,200 N. How is the clamp mounted in a fixture? Mounting is via the horizontal foot arrangement; the unit is designed to be fixed to a bench or fixture plate in the horizontal orientation with a 90° operating angle. Can the clamping pressure be adjusted? Yes, the clamp uses an M6x40 pressure spindle for fine adjustment of contact height and pressure to suit different workpiece thicknesses. Is the surface finish suitable for workshop environments? The zinc-plated finish offers corrosion resistance appropriate for typical workshop and light industrial conditions, helping to extend service life with minimal maintenance. What types of applications are typical for this clamp? The device is suitable for jigs, fixtures and assembly work where compact, repeatable horizontal clamping is required, such as light machining, welding fixtures and general assembly stations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 118mm Arm, Massive Holding Arm & Safety Lock, 2.5kN Holding Force - Kukamet
Take advantage of a robust clamping solution that combines a massive clamping arm, reliable safety locking and a compact, horizontal-foot mount for straightforward fixture integration; order the horizontal clamp directly via Metav Werkzeuge or ask the consultants for application advice. Horizontal clamp 111 — horizontal toggle clamp with 2,500 N holding force (Kukamet) The Horizontal clamp 111 is a compact horizontal toggle clamp designed for fixtures and jigs where secure, repeatable workholding at a 90° orientation is required. Heavy-duty clamping arm with safety lock 2,500 N maximum holding force Horizontal-foot mounting for bench fixtures Blackened burnished finish Secure force specification for reliable machining The clamp delivers a 2,500 N holding force alongside a 2,300 N pressing force, values that ensure workpieces remain stationary during assembly and light machining tasks. The distinction between holding and pressing force is important: holding force describes the maximum retention capacity once the clamp is engaged, while pressing force indicates the direct clamp pressure applied during engagement. These figures support predictable performance in production jigs, where consistent clamp force reduces rework and improves cycle reliability, making the solution particularly suitable for repetitive tasks in small series and workshop setups. Robust construction that prioritises safety and repeatability Built around a massive clamping arm and equipped with a safety lock, the unit prevents unintended release during operation and supports safe, repeatable clamping cycles. The 90° arm geometry provides compact clearance for fixtures and allows simple orientation within existing jigs. The blackened burnished finish gives a uniform surface appearance and resists everyday wear, contributing to long-term dimensional stability of the clamp and consistent contact with the workpiece. Fast integration into fixtures and compact handling The horizontal-foot mounting simplifies assembly into benches, fixtures and welding jigs, enabling secure bolting without additional adapters. With an 118 mm arm and a lightweight construction of 0.3 kg, the clamp is easy to position during setup and causes minimal load on delicate fixtures while still providing substantial retention. This makes the component a practical choice for toolrooms and production lines that require flexible, low-profile clamping without complex installation. Contact Metav Werkzeuge for supply from Emmerich and expert advice on integrating the Kukamet horizontal clamp 111 into existing fixtures. Technical data Article number: B111-3-D-L-C2 Model: 111 Brand: Kukamet Eclass: 21041719 ETIM: EC011973 Facts Maximum holding force: 2,500 N Maximum pressing force: 2,300 N Arm length: 118 mm Angle: 90° Weight: 0.3 kg Special features Massive clamping arm Safety lock Horizontal mounting foot Blackened burnished finish FAQ What clamping forces does the horizontal clamp provide? The Kukamet horizontal clamp 111 provides a maximum holding force of 2,500 N and a pressing force of 2,300 N, suitable for secure retention in fixtures. Can the clamp be mounted directly to a workbench or jig? Yes, the unit features a horizontal mounting foot that is intended for bolting directly to benches, fixtures and welding jigs. Is the clamp suitable for repetitive production use? The robust arm construction and safety lock on the Horizontal clamp 111 ensure repeatable operation and safe clamping cycles, making it appropriate for repetitive tasks. What is the arm reach and how does it affect setup? The clamp has an 118 mm arm length, which offers reach for most small to medium fixtures while keeping the overall footprint compact. What finish does the clamp have and how does it affect durability? The clamp is supplied with a blackened burnished finish that provides a durable surface and consistent contact behaviour over time. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 160mm Arm, 1,200N Hold Force, Massive Holding Arm - Kukamet
Take advantage of the combination of robust clamping force, a massive holding arm and compact mounting for reliable, repeatable fixtures; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. 113 horizontal clamp by Kukamet — 90° angle mounting, massive holding arm The 113 horizontal clamp secures workpieces at a fixed 90° angle for repetitive clamping tasks in workshops and production lines. Massive holding arm for reliable clamping 1,200 N holding force for secure fixturing 1,000 N clamping force for demanding tasks Angle foot mounting for stable 90° installation Consistent, powerful clamping that speeds up series production With a holding force of 1,200 N and a clamping force of 1,000 N, this clamp delivers measurable performance for repeated operations. The numeric forces indicate how much load the device withstands before slipping, which makes planning of fixtures straightforward and reduces rework. Specified forces translate directly into higher throughput and shorter setup cycles when used in jigs or assembly fixtures. The compact footprint and clear mechanical specification support integration into lean production sequences where predictable, strong clamping is required. Robust construction designed for long service life in workshops The clamp features a massive holding arm and a blackened finish that reduces glare and resists light surface wear, combining solid mechanics with an understated industrial appearance. The 160 mm arm provides reach for a variety of workpiece sizes while keeping the centre of gravity close to the mounting base. Built for repeated actuation, the component’s materials and design reduce the risk of premature fatigue in frequently used fixtures. These attributes contribute to dependable operation and fewer unplanned stoppages during batch runs. Practical mounting and versatile use in fixtures and jigs The clamp is supplied with an angle foot for fixed 90° installation, enabling quick alignment in standard fixturing setups and CNC workstations where lateral clearance is limited. The mounting method ensures a stable connection to plates and bases, simplifying repeatable positioning of parts. Due to its compact mass and clearly defined mechanical data, the unit is suitable for both manual and semi-automated stations, offering a straightforward way to improve clamp repeatability without complex retrofitting. Choose Kukamet quality with the 113 horizontal clamp (SKU B113-2-D-C3) — contact Metav Werkzeuge for ordering and technical advice via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: B113-2-D-C3 GTIN: 8680731507423 eClass: 21041719 ETIM: EC011973 Facts Weight: 0.306 kg Arm length: 160 mm Angle: 90° Max. clamping force: 1000 N Max. holding force: 1200 N Special features Mounting: angle foot Finish: blackened finish Feature: massive holding arm FAQ What holding and clamping forces does the clamp provide? The clamp delivers a holding force of 1,200 N and a clamping force of 1,000 N; these values describe the maximum static retention and active clamp pressure respectively for the 113 horizontal clamp from Kukamet. Is the clamp suitable for use in series production fixtures? Yes, the combination of a massive holding arm and defined force ratings makes the 113 horizontal clamp well suited to repetitive fixturing and series production applications. How is the clamp mounted to a fixture plate? Mounting is via an angle foot for fixed 90° installation, enabling stable attachment to plates and bases in typical workshop and production setups. What material and finish does the clamp have? The clamp has a blackened finish, providing surface protection and a reduced-reflective industrial appearance while supporting workshop durability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 2.3 kN Closing Force, Stainless Steel, Horizontal Foot - Kukamet
Combining a stainless steel body, 2,300 N clamping force and a compact 90° lever layout, this clamp provides secure, repeatable holding for fixtures and jigs; order the unit directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal clamp 111 (S111-3) by Kukamet – stainless steel, 2.3 kN clamping force A compact Horizontal clamp 111 designed for horizontal mounting and robust workpiece retention in assembly, welding and testing fixtures. Stainless steel construction Clamping force up to 2,300 N M8x50 pressure spindle included Horizontal foot, 90° lever position Reliable clamping for continuous production The clamp delivers a defined clamping force of 2,300 N and a holding force of 2,500 N, giving clear, verifiable values for fixture design and load calculations. These measured forces support process stability and reduce rework by keeping components immobile during machining or assembly. The numeric specifications enable planners to compare options objectively and to integrate the device where a compact, high-retention solution is required. Easy mounting and compact integration The horizontal foot mounting and 90° lever orientation allow straightforward installation into existing jigs and test benches without complex adapters. The integrated M8x50 pressure spindle permits fine adjustment of contact pressure and compensates for part tolerances, while the low mass of 0.34 kg minimises added inertia in automated fixtures. These characteristics translate into faster setup times and lower fixture complexity. Corrosion-resistant design for demanding environments Constructed from stainless steel, the unit resists corrosion and maintains surface integrity in humid workshops or light wash-down applications. The durable finish reduces maintenance needs and preserves repeatability over long service intervals. Where part cleanliness and longevity matter, the material choice ensures reliability without frequent replacement or extra protective measures. Practical performance for everyday clamping tasks Built to a simple, robust design, the clamp supports diverse workshop tasks such as assembly, positioning and holding during inspection. The 90° lever angle provides clear actuation geometry for automated or manual handling, while the compact footprint frees up valuable bench and fixture space. The combination of precise mechanical data and solid construction makes the device well suited for production, repair and prototyping environments. Contact Metav Werkzeuge for personalised ordering and application advice on the Kukamet Horizontal clamp 111 (S111-3) — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: S111-3 GTIN: 8680731503944 Manufacturer: Kukamet Core specifications Clamping force: 2,300 N Holding force: 2,500 N Weight: 0.34 kg Angle: 90° Pressure spindle: M8x50 Materials & features Material: stainless steel Mounting type: horizontal foot Special features: none FAQ What is the maximum clamping force of this clamp? The clamp provides a clamping force of 2,300 N and a holding force of 2,500 N, suitable for many fixture and assembly applications. Can the clamp be adjusted for different workpiece thicknesses? Adjustment is achieved via the M8x50 pressure spindle, allowing fine tuning of contact position and pressure for varying part dimensions. Is the clamp suitable for corrosive environments? The stainless steel construction gives enhanced resistance to corrosion and makes the clamp appropriate for environments with occasional humidity or light cleaning. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 2.3 kN Closing Force, Zinc Plated, Right-Angle Base - Kukamet
Take advantage of a compact, galvanised construction combined with dependable clamping and holding forces for steady fixture performance; order the Horizontalspanner 113 directly via Metav Werkzeuge or consult our advisors for integration support Horizontalspanner 113 — Kukamet angle-base horizontal lever clamp, galvanised, 2.3 kN clamping force Horizontalspanner 113 is a compact horizontal lever clamp designed to secure workpieces at 90° in jigs, fixtures and assembly stations for light- to medium-duty production Galvanised steel for corrosion resistance 2.3 kN clamping force for reliable hold Lightweight at 0.42 kg for easy handling Angle-base mounting for 90° fixture integration Consistent hold for repetitive production processes The Horizontalspanner 113 delivers a measurable clamping performance with a 2.3 kN clamping force and a 2.5 kN maximum holding capacity, providing predictable results in repeat operations. These rated forces translate into a stable, vibration-resistant grip that reduces rework and rejects. For production planners, the precise force specification supports risk assessment and fixture design choices, enabling more efficient cycle planning and less downtime. Built for durability and compact handling Constructed from galvanised material, this horizontal lever clamp resists surface corrosion in everyday workshop environments without the need for special coatings. At only 0.42 kg, the unit is easy to position and handle during assembly of jigs, yet robust enough for continuous use. The M8x50 pressure spindle allows straightforward adjustment of contact pressure and compensation for part tolerances, combining longevity with operator convenience. Quick integration into 90° fixtures and clamping stations The angle base allows direct installation into right‑angled fixtures, making the clamp suitable for modular tooling and machine beds. The horizontal lever action reduces the required clearance above the workpiece and simplifies loading and unloading. By integrating a compact horizontal clamp rather than a bulkier device, engineers can free up valuable table space and shorten set-up times, improving overall workstation ergonomics and throughput. Practical fit for workshops and small production lines This lever clamp is aimed at toolroom technicians, fixture builders and small-series manufacturers who value compact design and consistent performance. The uncomplicated construction and clear technical values support fast specification in CAD and parts lists. Supplied by Kukamet and distributed through Metav Werkzeuge, the unit benefits from reliable European logistics and the supplier’s quality control filter, helping to maintain uninterrupted workshop supply. Contact Metav Werkzeuge to discuss the Kukamet Horizontalspanner 113 for your fixture project — our Emmerich team will advise on integration and supply: +49 2822 7131930, info@metav-werkzeuge.com Technical data Article number: 113-3 GTIN: 8680731500820 Manufacturer: Kukamet Facts Clamping force max: 2300 N (2.3 kN) Holding force max: 2500 N (2.5 kN) Weight: 0.42 kg Angle: 90° Spindle: M8x50 ECLASS: 21041719 ETIM: EC011973 Special features Material: galvanised Mounting: angle base (Winkelfuß) Clamp type: horizontal lever clamp Special features: none FAQ How much clamping force does the clamp provide? The Kukamet Horizontalspanner 113 offers a clamping force of 2300 N (2.3 kN) with a maximum holding capacity of 2500 N (2.5 kN). What material is the clamp made from and how does it resist corrosion? The unit is made from galvanised steel, giving the clamp basic corrosion protection suitable for general workshop environments. What mounting method is required for installation? The clamp uses an angle base for 90° fixture mounting, making it suitable for direct installation into right-angled jigs and assemblies. Which spindle is fitted and how is pressure adjusted? An M8x50 pressure spindle is fitted, allowing manual adjustment of contact pressure to accommodate part tolerances. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 4.5 kN Thrust, 5 kN Holding Force, M12x80 Spindle, Black Oxide - Kukamet
Take advantage of the combination of 4,500 N clamping force, an angled base for 90° mounting and an adjustable M12×80 pressure spindle to secure components reliably in jigs and fixtures; order the Horizontal toggle clamp 113 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal toggle clamp 113 — horizontal clamp with 4,500 N clamping force (Kukamet) The Horizontal toggle clamp 113 is a compact horizontal clamping device designed for fixed-position workholding in jigs, fixtures and assembly processes, providing robust mechanical locking at a 90° clamp angle. 4,500 N clamping force for secure fixtures 5,000 N holding force for vibration resistance Angled base for flexible mounting at 90° M12×80 pressure spindle for precise adjustment Reliable clamping performance for production and assembly The clamp offers consistent mechanical locking thanks to its high nominal clamping force and elevated holding capacity, which reduces slippage and rework in repetitive operations. With a rated clamping force of 4,500 N and a holding force of 5,000 N, the device is suitable where firm, repeatable retention is required. The adjustable M12×80 pressure spindle allows fine tuning of contact pressure, while the compact build contributes to fast cycle times and minimal interference in tight fixture arrangements. Such measurable performance supports efficient throughput and predictable process behaviour. Flexible mounting and straightforward integration into fixtures Engineered for simple attachment, the clamp’s angled base permits installation on vertical or angled mounting plates without additional adapters, saving set-up time and reducing spare-part requirements. The 90° clamp orientation fits common jig geometries, and the blackened, brünished finish provides corrosion resistance and a discreet workshop appearance. Integration is simplified by the standardised spindle thread and the clamp’s compact mass of 1.84 kg, which eases handling during fixture assembly and minimises load on support structures. Durable finish and dependable supply for workshop standards Constructed with a hardened mechanism and a blackened finish that reduces surface glare and wear, the unit is designed for long service intervals under regular workshop use. The horizontal toggle concept combines mechanical simplicity with longevity, resulting in low maintenance demands and predictable life-cycle costs. Delivered through Metav’s European distribution hub, the clamp benefits from a transparent supply chain and the company’s experience in precision tooling, which supports reliable replenishment and consistent product quality. Contact Metav Werkzeuge for specification advice and to secure supply of the Kukamet Horizontal toggle clamp 113 — Metav’s technical team in Emmerich is available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: B113-5 GTIN: 8680731507546 eClass: 21041719 ETIM: EC011973 Core technical data Clamping force: 4,500 N Holding force: 5,000 N Weight: 1.84 kg Clamp angle: 90° Pressure spindle: M12×80 Special features Angled base (Winkelfuß) for 90° mounting Blackened (brünished) finish Horizontal toggle clamp design Lever-clamp family (hebelspanner) Category: Clamps FAQ What clamping force can be expected from this clamp? The Kukamet Horizontal toggle clamp 113 provides a clamping force of 4,500 N with a holding capacity listed at 5,000 N, offering secure retention for many jigs and fixture applications. How is the clamp fixed to a fixture plate? The unit features an angled base for mounting at 90°, allowing direct attachment to vertical or angled fixture plates without additional adapters. Is the pressure spindle adjustable and what size is it? Yes, the clamp uses an M12×80 pressure spindle, enabling precise adjustment of contact position and clamping preload. What is the weight and footprint of the clamp for planning fixtures? The clamp weighs 1.84 kg, and its compact horizontal design reduces interference in dense fixture arrangements. What surface treatment does the clamp have and why does it matter? The part is finished in a blackened (brünished) surface, which enhances wear resistance and reduces surface reflections in workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 5 kN Holding Force, 4.5 kN Closing Force, Massive Arm & Safety Lock - Kukamet
Take advantage of the combination of a robust holding arm, compact mounting and high retention force for dependable clamping in production. Order the Horizontal clamp 112 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 112 — horizontal clamp with 229 mm arm and 5,000 N holding force by Kukamet Horizontal clamp 112 is a lever clamp designed for secure workholding in jigs, fixtures and small-batch production where space, strength and repeatability matter Massive holding arm with safety lock 5,000 N holding force for secure fixtures 229 mm arm length for reach and clearance Vertical base mounting for compact set-ups Secure retention that reduces rework The clamp delivers a 5,000 N holding capacity combined with a maximum pressing force of 4,500 N, providing a measurable, reliable clamping result for repetitive operations. The robust holding arm and integrated safety lock keep components stable during machining or assembly, which reduces part movement and the need for corrective work. For users less familiar with clamping data, holding force refers to the maximum load the device resists without releasing; this is a direct indicator of how well a fixture will hold workpieces under process forces. Space-efficient design for versatile fixture layouts With an arm length of 229 mm and a vertical base mount, the unit is tailored to fixtures where horizontal clearance is limited but reach is required. The compact footprint and 90° operating angle facilitate placement close to other tooling or adjacent clamps, improving workflow density on modular plates. Finished in a blackened finish, the clamp resists superficial corrosion and presents a low-reflectivity surface that is useful in optical inspection setups and assembly lines. Durable construction that supports long service cycles Constructed with a massive holding arm and a lever mechanism developed for frequent operation, the clamp combines low mass — 1.42 kg — with structural rigidity to balance manoeuvrability and longevity. The mechanical design keeps maintenance straightforward: routine checks on the locking mechanism and lubrication of the pivot points are sufficient to maintain performance. Supplied by Kukamet, the unit is suitable where dependable, low-maintenance clamping is a priority and consistent part location is required. Contact Metav Werkzeuge for advice on integrating the Kukamet horizontal clamp 112 into existing fixtures, or to arrange supply from our Emmerich warehouse and European quality filter. Technical Data SKU: B112-5-D-L-C3 Product: Horizontal clamp 112 Manufacturer: Kukamet Core data Arm length: 229 mm Holding force max: 5,000 N Pressing force max: 4,500 N Weight: 1.42 kg Angle: 90° eCl@ss: 21041719 ETIM: EC011973 Special features Vertical base mounting Massive holding arm Safety lock Blackened finish Lever clamp (lever operation) Category: Clamps / Spanner FAQ What materials can be clamped with this lever clamp? The clamp is suitable for a broad range of workpiece materials; selection of clamping pads and fixturing accessories dictates specific compatibility for delicate or coated parts when using the Horizontal clamp 112 from Kukamet. How does the holding force relate to machining applications? Holding force (5,000 N for this model) indicates the maximum static retention; for dynamic machining forces the pressing force of 4,500 N and correct fixture design determine safe operation with the Kukamet horizontal clamp. Is the clamp suitable for dense fixture patterns on tooling plates? Yes, the compact footprint, 229 mm arm and vertical base mounting allow close spacing in dense fixture layouts without compromising access or stability. What maintenance is required to keep the clamp reliable? Periodic inspection of the pivot and locking mechanism and light lubrication are recommended; the durable construction and blackened finish help reduce routine upkeep for long service cycles. Does the clamp include a safety mechanism to prevent accidental release? A mechanical safety lock is integrated to prevent unintended opening during process steps, improving operator safety and process reliability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 5,000 N Holding Force, Massive Arm, Zinc-Plated - Kukamet
Take advantage of the combination of a 229 mm arm, galvanised construction and a compact footprint for repeatable clamping in production and jig applications. Order the horizontal toggle clamp directly via Metav Werkzeuge or contact the consultants for specification support. Kukamet Horizontal toggle clamp »112« — 229 mm arm, galvanised The Horizontal toggle clamp 112 secures workpieces at a 90° clamping angle with high holding capability for fixtures and production tooling. Robust 229 mm arm for deep clamping reach Massive holding arm for long-term stability Galvanised finish for corrosion resistance 5,000 N holding force, 4,500 N clamping force Consistent clamping performance for reliable production The 229 mm arm and lever mechanism deliver a highly repeatable clamping action, reducing cycle-time variation on jigs and fixtures. With a 5,000 N holding force and 4,500 N clamping force, the unit separates static holding capacity from initial clamping pressure, ensuring that once set the workpiece remains secure during machining or assembly. The compact mass and efficient toggle geometry allow rapid engagement and disengagement, supporting faster throughput without compromising stability. The robust mechanism is suited to repetitive tasks where predictable force and quick operation are decisive for process reliability. Durable construction reduces maintenance and downtime A galvanised finish and a massive holding arm combine to extend service life in workshop environments. The galvanised surface provides corrosion resistance where occasional moisture or workshop contaminants are present, while the solid arm construction limits flex under load and preserves alignment over time. At a mass of 1.6 kg, the unit balances solidity with easy handling during installation. The base is designed for a vertical foot mounting, creating a secure 90° interface that integrates cleanly into clamps, fixtures or bespoke jigs and minimises the risk of movement under lateral loads. Practical mounting and performance that supports diverse workflows Designed for repetitive clamping tasks, the clamp offers a defined 90° clamping position and accepts quick incorporation into standard fixture plates via the vertical foot. The lever action gives tactile feedback and reliable lock-up for manual and semi-automated stations, reducing set-up times and supporting operator confidence. The compact dimensions and clear force ratings simplify specification: choose this model where a long reach, robust retention and corrosion-resistant finish are required. The product’s measured parameters support informed decisions when matching a clamp to fixture geometry and expected load cases. Contact Metav Werkzeuge for tailored advice on integrating this Kukamet clamp into production tooling; call +49 2822 7131930 or email info@metav-werkzeuge.com for prompt specification support and procurement guidance Technical Data SKU: 112-5-D-C3 GTIN: 8680731500677 Model: Horizontal toggle clamp 112 Facts Arm length: 229 mm Weight: 1.6 kg Holding force: 5,000 N Clamping force: 4,500 N Clamping angle: 90° Special features Material: galvanised Mounting: vertical foot Massive holding arm eClass: 21041719 ETIM: EC011973 FAQ What is the difference between holding force and clamping force? The holding force refers to the sustained retention capacity (5,000 N) while the clamping force (4,500 N) indicates the initial pressure applied during engagement on the Horizontal toggle clamp 112 Can the clamp be mounted on plates and jigs? Yes, the vertical foot design allows direct plate mounting and straightforward integration into jigs and fixture assemblies Is the finish suitable for humid workshop environments? The galvanised finish on this Kukamet clamp provides corrosion resistance suitable for typical workshop conditions What are typical applications for this clamp? The clamp is intended for fixture work, assembly jigs and production tooling where a long reach and secure, repeatable clamping are required; the SKU is 112-5-D-C3 for ordering How compact is the clamp for tight fixture layouts? With a 229 mm arm and a weight of 1.6 kg, the clamp offers a long reach while maintaining a compact footprint for confined fixture spaces Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 5 000 N Holding Force, 4 500 N Closing Force, 229mm Arm, Zinc Plated, Heavy-Duty Arm & Safety Lock - Kukamet
The combination of a massive holding arm, a secure safety lock, and a galvanised finish ensures reliable clamping with low maintenance demands; use this robust solution to keep jigs and fixtures stable and productive. Order the clamp directly via Metav Werkzeuge or consult our specialists for application-specific advice. Horizontal clamp 112 by Kukamet — galvanised lever clamp with 4,500 N clamping force A Horizontal clamp 112 for fixed installation with a vertical base, engineered to provide secure 90° holding for jigs, fixtures and repetitive assembly tasks. Massive 229 mm holding arm Safety lock for vibration protection Galvanised finish for corrosion resistance Vertical base for 90° fixed mounting Reliable clamping for consistent workflows The clamp delivers measured holding and clamping values that support reproducible production steps: 4,500 N clamping force and 5,000 N maximum holding force reduce part movement during machining or assembly. The lever action converts operator input into a strong, repeatable clamping load, cutting cycle variability. The integrated safety lock prevents accidental release under vibration or inertia, improving process reliability and reducing rejects in batch work. Durable construction for workshop conditions Constructed from galvanised steel with a massive holding arm, the unit resists surface corrosion and stands up to daily workshop use with minimal upkeep. The 229 mm arm length provides good reach into fixtures while maintaining rigidity, and the overall mass of 1.42 kg balances portability with solidity. The plated finish simplifies cleaning and helps preserve clamping accuracy over time, lowering life-cycle effort and supporting continuous operation in industrial environments. Easy mounting and straightforward integration into fixtures Designed for installation on a vertical base, the clamp fixes at a 90° working angle to suit standard jig plates and assembly frames. The compact footprint and lever-style actuation make it suitable for tight layouts and repetitive handling stations. Supplied with a clear SKU and traceability for procurement, the component fits typical workholding patterns and streamlines assembly preparation. Metav’s supply chain ensures steady availability from Emmerich for production replenishment and replacement parts. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Horizontal clamp 112 into existing fixtures and securing timely delivery from Emmerich. Technical data Article number: 112-5-D-L-C3 GTIN: 8680731500707 Manufacturer: Kukamet Facts Clamping force (max): 4,500 N Holding force (max): 5,000 N Arm length: 229 mm Weight: 1.42 kg Angle: 90° Special features Material: galvanised Mounting: vertical base Massive holding arm Safety locking mechanism Category: Spanner eCl@ss: 21041719 ETIM: EC011973 FAQ What clamping capacity does the clamp offer? The clamp provides a clamping force of 4,500 N and a maximum holding force of 5,000 N, suitable for many industrial jigs and fixtures. Is the clamp suitable for workshop environments with humidity or light exposure? Yes, the galvanised finish increases corrosion resistance and suits standard workshop conditions, extending service life. How is the clamp mounted to a fixture plate? The unit is designed for fixed installation on a vertical base at a 90° working angle, compatible with common jig plates and assembly frames. Does the clamp include a safety feature to prevent accidental opening? A mechanical safety lock is integrated to secure the lever in the closed position and prevent unintended release under vibration. Which product identification should be used when ordering spare parts? Refer to SKU 112-5-D-L-C3 and GTIN 8680731500707 to ensure correct ordering and traceability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 66mm Arm, Massive Holding Arm And Safety Lock, 1,200N Hold Force - Kukamet
Take advantage of a compact, heavy-duty clamping solution that combines a massive holding arm, a safety locking mechanism and clear force specifications for predictable fixture retention. Order the clamp via Metav Werkzeuge for reliable delivery and expert consultation from an established precision partner. Horizontal lever clamp 111 — heavy-duty horizontal clamp with 90° hold and safety lock The Horizontal lever clamp 111 is a horizontal clamping device for production and workshop jigs, designed to secure workpieces at a right angle with a compact footprint Heavy-duty holding arm Safety locking mechanism Clamping force up to 1,000 N Compact 66 mm arm length Secure retention through defined clamping and holding figures The clamp delivers a clamping force of 1,000 N and a holding force of 1,200 N, values that give clear, comparable performance when selecting clamps for fixtures and jigs. These figures describe the effective compressive push during actuation and the continuous retention capacity once engaged. Measured force values reduce trial-and-error in set-up planning and support predictable cycle times on production lines. The presence of a safety lock prevents unintended release, improving operator safety and reducing the risk of lost parts or rework. Compact mounting that preserves workspace and improves throughput With an arm length of 66 mm and a horizontal-foot mounting, the clamp integrates into tight assemblies and modular tooling with little overhang. Its small mass (approx. 0.2 kg) keeps added inertia low on moving fixtures and simplifies retrofitting into existing jigs. The 90° clamping orientation is suited to vertical workpiece faces and bracket assemblies, enabling quicker part loading and unloading and therefore higher throughput per shift. The compact design helps to keep the clamping station organised and accessible for fast adjustments. Robust finish and construction for dependable daily use Constructed with a blackened finish and a massive holding arm, the device resists common workshop wear and presents a low-maintenance interface. The blackened surface reduces glare and offers basic corrosion resistance where oil and coolant exposure occur. The lever-style actuation provides tactile feedback during engagement and the incorporated safety locking mechanism gives long-term retention reliability. For metalworking and general assembly jigs, this clamp is a practical choice where consistent repeatability and simple mechanical operation are required. Contact Metav Werkzeuge for specification matching and immediate ordering—Metav Werkzeuge handles European distribution from Emmerich and can advise on integration and quantities; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: B111-2-D-L-C1 Brand: Kukamet ECLASS: 21041719 ETIM: EC011973 Clamping force: 1,000 N Holding force: 1,200 N Arm length: 66 mm Angle: 90° Weight: 0.2 kg Horizontal foot mounting Massive holding arm Safety locking mechanism Blackened finish FAQ What is the maximum clamping force and how is it specified? The maximum clamping force is 1,000 N; the specification refers to the nominal actuation force provided when the clamp is engaged on the Horizontal lever clamp 111 (SKU B111-2-D-L-C1). Can the clamp be mounted in confined jig spaces? Yes, the compact 66 mm arm and horizontal foot mounting make the clamp suitable for tight fixtures and constrained assembly areas. Is the finish resistant to workshop conditions? The clamp features a blackened finish that offers basic protection against corrosion and wear in typical workshop environments. Does the device include a safety feature to prevent accidental release? A mechanical safety locking mechanism is integrated to secure the lever in the closed position and prevent unintentional opening. Which applications is this clamp intended for? Designed for fixture and jig clamping at 90°, it is suitable for general assembly, metalworking jigs and production tooling that require repeatable retention. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 850 N Clamping Force, Zinc Plated - Kukamet
Robust galvanised construction, a compact 0.125 kg body and up to 1,000 N holding force deliver dependable fixing for light‑duty jigs and fixtures. Order the Horizontal clamp 111 directly via Metav Werkzeuge or consult our specialists for help selecting the right clamping solution. Horizontal clamp 111 — Kukamet horizontal lever clamp, galvanised, 1,000 N holding force The Horizontal clamp 111 is a compact horizontal lever clamp for secure mounting in production fixtures and workshop jigs, offering a 90° lever position and a galvanised finish for corrosion resistance. Galvanised for corrosion resistance Holding force up to 1,000 N Compact weight: 0.125 kg Horizontal base for 90° mounting Consistent hold where it matters The clamp provides a defined clamping force of 850 N and a maximum holding force of 1,000 N, which ensures steady retention of small workpieces in repeat operations. These forces are achieved through a simple, mechanical lever design that transfers the actuation into a reliable securing action. The result is reduced setup variation and fewer reworks in assembly or light machining tasks, as the component remains fixed once the lever is engaged. Compact design that integrates easily A low mass of 0.125 kg and a horizontal base mounting mean the unit is easy to fit into confined fixtures and tight layouts without adding significant inertia. The M5x35 pressure spindle offers a standardised contact point that can be adjusted for slight height differences or fitted with protective pads if surface protection is required. The 90° lever position allows clear access for actuation while keeping the clamp profile low, simplifying layout planning for jigs and assembly stations. Built for routine workshop use Constructed from galvanised material, the clamp resists surface corrosion in typical workshop environments, supporting long service life with minimal upkeep. The tool's simple geometry and lack of complex moving parts reduce maintenance demands and allow for quick replacement if required. As a lever clamp from Kukamet, it is suitable for light‑to‑medium fixture tasks where repeatable mechanical securing is needed and where space and weight are limiting factors. For reliable clamping with a galvanised finish choose the Kukamet Horizontal clamp 111 — order via Metav Werkzeuge or contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930 for tailored application advice Technical data Article number: 111-1 GTIN: 8680731500035 EClass: 21041719 ETIM: EC011973 Manufacturer: Kukamet Facts Holding force: 1,000 N Clamping force: 850 N Weight: 0.125 kg Angle: 90° Pressure spindle: M5x35 Special features Material: galvanised Mounting: horizontal base Lever clamp design Arm: not applicable Special features: none FAQ What materials is the clamp suitable for? The Horizontal clamp 111 is a general‑purpose lever clamp; material compatibility depends on fixture design and contact pads — the unit itself is galvanised for corrosion resistance. How is the clamp mounted in a fixture? Mounting uses the horizontal base; the clamp is designed for horizontal installation with a 90° lever orientation for straightforward integration in jigs and fixtures. What adjustment options are available for contact pressure? Adjustment is made via the M5x35 pressure spindle, enabling fine setting of the contact point and compensation for small height differences. Is the clamp suitable for heavy machining tasks? The clamp provides up to 1,000 N holding force and is intended for light‑to‑medium securing tasks; for heavier machining, a higher‑capacity clamping system should be considered. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 850 N Thrust, 1,000 N Holding Force, M5x35 Spindle, Black Oxide - Kukamet
Secure production with compact fixtures thanks to the combination of a 1,000 N holding force, 850 N clamping force and an angled-foot mounting that keeps set-ups stable. Order the clamp directly via Metav Werkzeuge or consult our advisors for integration support. Horizontal clamp 113 — angled-foot, 90° lever clamp with M5x35 spindle (Kukamet) A robust Horizontal clamp 113 engineered for 90° clamping tasks in jigs and fixtures, offering compact dimensions and precise adjustment for repeatable set-ups Angled-foot mounting for 90° positioning Holding force 1,000 N for secure clamping Pressure spindle M5x35 for fine adjustment Blackened finish for corrosion resistance Stable workholding that reduces rework The holding force of 1,000 N combined with a clamping force of 850 N delivers consistent retention for small to medium fixtures, reducing vibration and slippage during machining or assembly. This reliability translates directly into fewer rejects and less rework; the clamp’s force values are intended as design parameters for engineers planning fixture loads and safety factors. The described performance supports precision workflows where repeatability is essential. Compact design for efficient integration With an angled-foot mounting and a compact mass of 0.155 kg, the clamp integrates easily into modular jig plates and assembly rigs, occupying minimal space on the workbench. The 90° operating angle suits lateral clamping needs and permits close-packed arrangements of multiple clamps. The included M5x35 pressure spindle enables micro-adjustment of contact pressure, allowing calibration of the clamp’s point load without additional shims or spacers. Durable finish and straightforward maintenance The blackened finish gives basic corrosion protection and low reflectivity for machine‑vision environments, while simple cleaning preserves function over prolonged use. The clamp’s mechanical principle is accessible for workshop technicians: the spindle sets the contact pressure and the lever locks the arm, creating a predictable clamp travel and repeatable seating. Minimal maintenance—occasional lubrication and inspection—keeps the device serviceable with little downtime. For compact, reliable clamping with the Kukamet Horizontal clamp 113, contact Metav Werkzeuge in Emmerich for specification advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B113-1 GTIN: 8680731507379 Manufacturer: Kukamet Facts Holding force: 1,000 N Clamping force (max): 850 N Weight: 0.155 kg Operating angle: 90° Pressure spindle: M5x35 Special features Material/finish: blackened finish Mounting: angled-foot Arm: not applicable SKU: B113-1 FAQ What clamping and holding forces does the clamp provide? The clamp offers a clamping force of 850 N and a holding force of 1,000 N, values intended for secure workholding in fixture and assembly applications. How is the clamp mounted to a fixture plate? Mounting is via an angled-foot arrangement that allows secure bolting at 90° orientation for compact fixture layouts. How is contact pressure adjusted on the clamp? Contact pressure is adjusted with the M5x35 pressure spindle, enabling fine tuning of the clamp point without additional parts. What finish does the clamp have and what maintenance is required? The clamp features a blackened finish providing basic corrosion resistance; periodic cleaning and light lubrication of moving parts is recommended. Which SKU identifies this model for ordering? The model is listed as SKU B113-1, sold under the Kukamet brand for compact horizontal clamping tasks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 93mm Arm, 850N Closing Force, Galvanised Massive Holding Arm - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines a massive holding arm with reliable holding force for consistent jig work; order the item directly via Metav Werkzeuge or contact our consultants for application advice. 112 Horizontal toggle clamp by Kukamet — galvanised, 1,000 N holding force 112 is a horizontal clamp for secure workholding in jigs and fixtures, designed for repetitive clamping tasks where a robust arm and corrosion resistance are required Robust galvanised construction Massive 93 mm holding arm Holding force 1,000 N Vertical-foot mounting for stability Consistent clamping force for repeatable production The clamp delivers measurable performance through a holding force 1,000 N and a closing force 850 N, values that ensure components remain fixed during machining, welding or assembly operations. As a compact toggle clamp, it converts manual actuation into dependable clamping pressure, reducing cycle-time variability and supporting process stability in small-batch and series production. The mechanical action is straightforward to integrate into custom fixtures, offering an efficient solution where repeatability matters. Durable construction reduces maintenance and downtime Constructed from galvanised steel with a massive holding arm, the device resists surface corrosion while maintaining structural rigidity under load. The robust build minimises deformation and extends service intervals compared with lighter designs, translating to fewer replacement cycles and lower indirect costs for the workshop. The lightweight overall mass also keeps additional load on fixturing low while the plated finish supports a long service life in standard workshop environments. Fast, accurate installation for stable jigs and fixtures A vertical foot mounting provides a compact footprint and secure anchorage, while the right-angled geometry at 90° supports precise positioning relative to the workpiece. The 93 mm arm length gives a practical reach for many common clamping tasks, allowing easy engagement with parts of varying sizes without sacrificing clamp leverage. Clear mechanical travel and defined clamping points simplify alignment during setup, so fixtures remain consistent from one cycle to the next. For workshop-ready workholding with the Kukamet 112 horizontal clamp, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to confirm suitability and delivery options Technical data Article number: 112-1-D-C2 GTIN: 8680731501292 Type: Horizontal clamp Brand: Kukamet Facts Arm length: 93 mm Closing force: 850 N Holding force: 1,000 N Angle: 90° Weight: 0.136 kg SKU: 112-1-D-C2 Special features Material: galvanised Mounting: vertical foot Massive holding arm Category: Clamp FAQ What holding and closing forces does this clamp provide? The Kukamet 112 horizontal clamp provides a holding force of 1,000 N and a closing force of 850 N, values suitable for stable workholding in jigs and fixtures. How is the clamp mounted to a fixture? Mounting is via a vertical foot; the design secures the clamp at a 90° orientation for compact and repeatable fixture integration. What is the arm reach and why does it matter? The arm reach is 93 mm; this provides practical access to a variety of part sizes while maintaining effective leverage for reliable clamping. Is the clamp suitable for use in workshop environments? The galvanised finish and massive holding arm give the clamp enhanced durability for typical workshop conditions and frequent operation by hand. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Angle Base, 850 N Thrust, 1 000 N Holding Force, Zinc Plated - Kukamet
Stable 90° clamping combined with a galvanised steel body and up to 1,000 N holding force ensures dependable fixture for light assembly and jigs; order the Horizontal clamp 113 directly via Metav Werkzeuge or request guidance from our technical consultants. Horizontal clamp 113 — horizontal toggle clamp, galvanised, 90° angle base (Kukamet) Horizontal clamp 113 designed for secure 90° positioning in light assembly, jig and fixture applications, offering compact dimensions and reliable holding performance *Galvanized steel construction *90° mounting with angle base *Holding force up to 1,000 N *M5x35 pressure spindle included Consistent clamping performance for light production The horizontal toggle design delivers a controlled, repeatable clamping action that suits assembly, inspection and small-batch production. The device provides a clamping force of 850 N and a holding force of 1,000 N; the first figure denotes the force applied during engagement, while the second indicates the maximum static retention the clamp can sustain without slippage. This distinction matters when planning fixture layouts and sequencing operations, because higher holding force reduces repositioning and increases process reliability. The compact mass and mechanical simplicity mean quick cycle times and low maintenance requirements, preserving uptime on shop-floor tooling and fixtures. Durable finish and flexible mounting for workshop use Constructed in galvanised steel, the clamp resists corrosion where occasional moisture or coolant exposure occurs, extending service life in busy work environments. The angle base (Winkelfuß) provides a firm 90° mounting interface, allowing integration into jigs, plates or tooling blocks with minimal adaptation. At just 0.155 kg, the component is lightweight enough for modular fixtures yet robust enough for repeated actuation. The combination of finish and form factor supports both portable jigging and permanent fixture installations, making the part suitable for both maintenance workshops and production benches. Practical installation and adjustment explained Adjustment is performed via the M5x35 pressure spindle, which enables fine positioning of the contact point and straightforward replacement if wear occurs. The clamp does not include an additional lever arm, keeping the profile low and the mechanism simple to service. For design engineers planning fixture interfaces, the compact body and right-angle mount simplify CAD incorporation and reduce interference with adjacent tooling. Supplied by Kukamet and distributed by Metav Werkzeuge, the component benefits from established quality control and wide availability across spare parts and complementary fastening items. For dependable 90° clamping with galvanised durability, contact Metav Werkzeuge for supply or technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 113-1 GTIN: 8680731500721 ECLASS: 21041719 ETIM: EC011973 Core specifications Holding force: 1,000 N Clamping force: 850 N Weight: 0.155 kg Angle: 90° Materials & features Material: galvanised steel Fixing type: angle base Pressure spindle: M5x35 Brand: Kukamet FAQ What materials can be clamped with this toggle clamp? The clamp is suitable for general workshop materials; its galvanised body and holding capacity make the Horizontal clamp 113 appropriate for many light-metal and composite fixtures. How does clamping force differ from holding force? Clamping force (850 N) refers to the action during engagement; holding force (1,000 N) is the static retention capacity of the clamp under load when closed on a workpiece. How is the spindle adjusted and replaced? Adjustment is via the M5x35 pressure spindle, which can be rotated for fine contact-point positioning and replaced using standard M5 tools if renewal is required. Can the clamp be mounted to jigs and plates at 90°? Yes, the angle base offers a 90° mounting interface intended for direct fastening to plates, blocks or jigs, simplifying integration in fixture assemblies. Is the clamp suitable for frequent actuation? The simple toggle mechanism and galvanised finish support frequent actuation in light to moderate duty cycles typical of assembly and inspection tasks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Angle Foot, Zinc Plated, 1,000 N Thrust / 1,200 N Hold - Kukamet
Galvanised construction, a compact 0.27 kg body and up to 1,200 N holding force provide dependable, repeatable clamping for jigs and fixtures. Order the horizontal clamp 113 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 113 — galvanised angle-base clamp with 1,200 N holding force (Kukamet) The horizontal clamp 113 is a compact angle-base lever clamp designed for secure fixture in jigs, fixtures and general workshop applications where consistent holding force and a small footprint are required. Galvanised steel construction Holding force 1,200 N Clamping force up to 1,000 N Angle base, 90° orientation Reliable clamping for repetitive production tasks The compact lever clamp delivers consistent holding force across repeated cycles, ensuring components remain steady during machining or assembly. Constructed from galvanised steel, the unit resists corrosion in workshop environments while remaining lightweight at 0.27 kg, making it suitable for modular jigs and mobile fixtures. The combination of a clearly specified holding force of 1,200 N and a maximum clamping force of 1,000 N supports predictable process stability and reduces the need for frequent rework, helping to maintain throughput in production or repair workflows. Simple integration and secure mounting for fixtures Designed with an angle base (Winkelfuß) and a 90° orientation, the clamp accommodates standard fixture plates and allows straightforward positioning in complex assemblies. The M6x40 pressure spindle gives adjustable contact pressure and straightforward replacement if needed. Where interchangeability and repeatable setup matter, this compact clamp fits quickly into existing tooling layouts and can be mounted with common fasteners, limiting downtime during changeovers. Clear numeric specifications aid planners in selecting the right clamping force for a given task without trial-and-error. Practical benefits for workshop and light industrial use Beyond the technical data, the device offers operational benefits: reduced fixture weight, corrosion protection from the galvanised finish and a small footprint that supports denser tool layouts. The plain design means low-maintenance operation and uncomplicated inspection routines, while the defined force ratings support engineering calculations for safe clamping. For shops and suppliers seeking dependable, entry-level clamping with transparent performance metrics, this lever-style horizontal clamp is a pragmatic choice that balances durability and simplicity. Choose the Kukamet horizontal clamp 113 for consistent clamping performance; contact Metav Werkzeuge for procurement advice and fast delivery from Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 113-2 GTIN: 8680731500745 Manufacturer: Kukamet Facts Holding force: 1,200 N Clamping force (max): 1,000 N Weight: 0.27 kg Angle: 90° Pressure spindle: M6x40 Special features Material: galvanised Mounting: angle base SKU: 113-2 No special features FAQ What materials is this clamp suitable for? The Kukamet horizontal clamp 113 is a general-purpose lever clamp; its galvanised steel construction is suitable for typical workshop materials and fixtures rather than specific workpiece materials. How is the clamp mounted in a fixture? Mounting is by an angle base (90°); the clamp is designed for secure attachment to fixture plates using common fasteners compatible with the base geometry. What is the difference between holding force and clamping force here? Holding force (1,200 N) indicates the static retention capability, while clamping force (1,000 N) refers to the maximum adjustable pressure applied via the pressure spindle M6x40 on the clamp. Is the pressure spindle replaceable? Yes, the pressure spindle specified as M6x40 can be adjusted or replaced as part of routine maintenance to restore correct contact pressure. Can the clamp be used outdoors or in humid conditions? The galvanised finish improves corrosion resistance compared with bare steel, offering increased durability in humid workshop environments, though long-term outdoor exposure should be evaluated for specific conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With M5x35 Plunger, 850 N Closing Force, Stainless Steel - Kukamet
Take advantage of robust stainless‑steel construction, a compact form factor and reliable clamping performance to keep fixtures secure with minimal setup time. Order the horizontal clamp directly via Metav Werkzeuge or consult the specialists for application advice. Horizontalspanner 111 — Horizontal clamp in stainless steel with 850 N clamping force The 111 horizontal clamp by Kukamet is a compact toggle clamp for secure fixture and jig workholding in production and assembly environments. Horizontal clamp "111" by Kukamet, stainless steel Clamping force up to 850 N Holding force up to 1,000 N Horizontal foot mount, 90° lever position Secure, corrosion‑resistant clamping for dependable throughput The compact design delivers robust workholding without excessive mass: constructed from stainless steel, the clamp resists corrosion while remaining lightweight (0.125 kg) for flexible fixture layouts. The specified 850 N clamping force and 1,000 N holding force provide quantifiable retention; these figures indicate the maximum force transmitted during actuation and the static load the device can sustain respectively. For production planners, this translates into predictable part retention under repeatable cycle conditions and reduced rework due to workpiece movement. Quick mounting and precise adjustment to save assembly time A horizontal foot mount and a lever set at 90° permit low‑profile installation onto plates and modular tooling systems, keeping adjacent components accessible. The integrated spindle specified as M5x35 allows fine adjustment of contact pressure and compensates for part tolerances without additional shims. These mechanical choices shorten fixture changeover and reduce setup time, improving line efficiency and machine availability in cell‑based manufacturing. Compact footprint with industrial durability for varied workstations The toggle mechanism offers a compact footprint suitable for tight jigs and confined fixtures while maintaining industrial durability. The combination of corrosion‑resistant material and a straightforward mechanical design yields low maintenance intervals and long service life under normal workshop conditions. The clamp’s modest mass and form factor make it compatible with both bench‑level assemblies and machine‑mounted workholding solutions, enabling consistent clamping in repetitive operations. Practical fit: predictable performance and straightforward integration Specification clarity—material, forces, spindle dimensions and mounting type—simplifies component selection for engineers and buyers when integrating clamp elements into larger assemblies. The robust specification supports rational decisions based on measurable performance rather than subjective claims, aiding procurement and production planning. For further technical clarification, Metav Werkzeuge can supply detailed drawings and compatibility advice to ensure seamless integration into existing tooling. Contact Metav Werkzeuge for tailored advice and fast supply from Emmerich—phone +49 2822 7131930 or eMail info@metav-werkzeuge.com to discuss fixture requirements and delivery options Technical data Article number: S111-1 GTIN: 8680731503920 Model: 111 Facts Clamping force: 850 N Holding force: 1,000 N Weight: 0.125 kg Angle: 90° Spindle: M5x35 Special features Material: stainless steel Mounting: horizontal foot Type: horizontal clamp eClass: 21041719 ETIM: EC011973 Special features: none FAQ What does the 850 N clamping force mean in practice? The 850 N value indicates the maximum dynamic force applied by the clamp during actuation; in the 111 horizontal clamp it defines the peak retention capacity for securing components during machining or assembly. How is the clamp mounted and what does horizontal foot mean? The clamp installs via a horizontal foot which is fastened to a fixture plate or base; the 90° lever orientation keeps the actuator parallel to the mounting surface for compact integration. Can the clamping contact be adjusted for different workpiece thicknesses? Yes, the M5x35 spindle provides micrometric adjustment of the contact face, enabling compensation for varying part heights without additional shims. Is the clamp suitable for use in corrosive workshop environments? Constructed from stainless steel, the clamp offers enhanced resistance to corrosion compared with standard steels, making it suitable for general workshop and assembly settings where moderate exposure may occur. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive 143mm Holding Arm, 850N Closing Force, 1,000N Holding Force, Blackened - Kukamet
Take advantage of a compact, durable clamping solution that combines a massive holding arm with a horizontal foot for stable mounting; the result is reliable repeatability and efficient bench workflows. With up to 1,000 N holding force and a compact 143 mm arm, this clamp supports secure set-ups across metalworking and assembly tasks. Order the horizontal clamp directly via Metav Werkzeuge or ask the consultants for tailored advice. Kukamet Horizontal clamp 111 — compact lever clamp with 1,000 N holding force Horizontal clamp 111 is a lever-actuated, bench-mounted clamp designed for workshop and industrial fixturing; it secures components at a right angle for stable machining and assembly operations. Massive holding arm for rigid clamping Horizontal foot for secure bench mounting Holding force up to 1,000 N Blackened finish for wear resistance Reliable clamping performance for repetitive tasks The clamp delivers consistent, measurable performance thanks to its holding force specification and robust lever mechanism. Rated at 1,000 N holding force with a maximum pressing force of 850 N, it enables precise retention of workpieces during machining, inspection or assembly cycles. The combination of defined force values and a rigid lever means set-ups can be standardised, reducing variation between runs and improving throughput. For novices, this translates into fewer re-clamps and less scrap, while experienced technicians gain a dependable, repeatable fixture element. Rugged construction and straightforward mounting Constructed with a massive holding arm and finished in a blackened finish, the device resists everyday workshop wear while maintaining a compact footprint. The horizontal foot mount provides a secure interface to a workbench or fixture plate, allowing the clamp to bear lateral loads at a 90° angle. The arm length of 143 mm offers practical reach without excessive leverage that could destabilise the set-up. Parts and toolmakers will appreciate the simple mechanical design that reduces maintenance and avoids reliance on pneumatics or hydraulics for basic clamping tasks. Versatile across fixturing and light machining applications This horizontal lever clamp is suitable for a wide range of workshop applications, from general fixturing to light-duty machining operations where a reliable mechanical hold is required. The compact mass and low weight support flexible placement in modular jigs, while the clear force ratings allow planners to match the clamp to the specific load case. The unit’s straightforward function—lock, hold, release—makes it well suited to repeat operations on small to medium components, contributing to faster set-up times and a more predictable production flow. For robust, repeatable clamping solutions from Kukamet, contact Metav Werkzeuge to discuss the Horizontal clamp 111 and its integration into existing fixtures and benches Technical data SKU: B111-1-D-C3 GTIN: 8680731506938 eClass: 21041719 ETIM: EC011973 Manufacturer: Kukamet Facts Weight: 0.152 kg Arm length: 143 mm Angle: 90° Holding force max: 1,000 N Pressing force max: 850 N Special features Horizontal foot mounting Massive holding arm Blackened finish Compact lever clamp design Category: Clamps Version: 111 FAQ What maximum holding force does the clamp provide? The clamp offers a maximum holding force of 1,000 N, which is suitable for many workshop fixturing tasks where stable retention is required. Can the clamp be mounted on a standard bench or fixture plate? Yes. The horizontal foot design allows secure attachment to workbenches and fixture plates, providing a rigid base for the lever-action clamp. Is the finish suitable for industrial environments? The unit features a blackened finish that improves surface wear resistance and helps protect against everyday workshop abrasion. What is the reach of the clamp arm? The clamp is fitted with an arm length of 143 mm, offering practical reach for small to medium components without excessive lever-induced motion. Is this clamp suitable for automated or high-speed production? The clamp is a mechanical lever device intended for manual or semi-automated fixturing; it is best used where robust, repeatable mechanical clamping is required rather than full automated actuation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive 167mm Arm, 5 000 N Holding Force, Zinc Plated - Kukamet
Benefit from a robust combination of galvanised construction, a 167 mm heavy-duty arm and a standout 5,000 N holding force for dependable clamping in repetitive production tasks. Secure supply and expert advice are available from Metav Werkzeuge; order the component directly via Metav or consult the technical team for application support. Horizontal clamp 113 — horizontal lever clamp with 5,000 N holding force (Kukamet) Horizontal clamp 113 is a horizontal lever clamp designed for secure fixture work in jigs and assembly stations, providing strong holding capacity at a right angle. Galvanised steel construction 5,000 N maximum holding force 4,500 N clamping power Angled-foot mounting for secure fit Durable clamping where repeatability matters The clamp delivers consistent holding strength thanks to a rated 5,000 N holding force and a 4,500 N clamping force, which are specified values for static retention and active clamping respectively. These figures indicate that the device will keep fixtures immobile under load and provide sufficient closing power for most light-to-medium assembly tasks. The 167 mm arm provides reach while maintaining leverage, reducing the need for frequent repositioning. By choosing a lever-style horizontal clamp, workshop processes gain repeatable fixture positioning and reduced rework, which supports higher throughput and predictable quality. Stable mounting and precise alignment for fixtures Mounting via the supplied angled-foot creates a compact, low-profile connection to base plates or jigs and supports the specified 90° operating angle, ensuring the clamp works reliably in right-angled arrangements. The model’s massive holding arm transfers forces directly into the fixture, decreasing deflection during clamping. For engineers and technicians this translates into accurate part registration and fewer alignment checks, improving cycle-time stability on assembly lines and manual workstations alike. Corrosion resistance and low-maintenance operation Constructed from galvanised steel, the clamp is finished to resist corrosion in workshop environments, extending service life and maintaining consistent performance with minimal upkeep. At a weight of 1.808 kg, the unit is robust yet manageable for assembly into fixtures or tooling plates. The simple lever mechanism is suited to repetitive operation and requires only routine inspection rather than complex maintenance. For operations that seek dependable components with straightforward integration, this clamp offers a balance of durability and ease of use that supports long-term uptime. For application-specific advice or to arrange supply of the Kukamet horizontal clamp, contact Metav Werkzeuge in Emmerich for precise recommendations and dependable logistics from stock — phone +49 2822 7131930 or e-mail info@metav-werkzeuge.com. Technical data Article number: 113-5-D-C2 GTIN: 8680731501025 Brand: Kukamet Material: Galvanised Weight: 1.808 kg Facts Holding force: 5000 N Clamping force (max): 4500 N Arm length: 167 mm Operating angle: 90° SKU: 113-5-D-C2 eClass: 21041719 ETIM: EC011973 Special features Mounting: Angled foot Massive holding arm Story trigger: lever clamp Category: Spanner FAQ What is the difference between holding force and clamping force? Holding force denotes the maximum static retention (here 5,000 N); clamping force is the active closing force during engagement (4,500 N) for the horizontal clamp 113. Can the clamp be mounted on a custom jig plate? Yes, the angled-foot mounting is suitable for secure attachment to jig plates and fixture bases designed for right-angled clamps. Is the surface treatment suitable for humid shop floors? The galvanised finish provides corrosion resistance appropriate for standard workshop environments; it reduces the need for frequent surface treatment. What is the arm reach and how does it affect fixture design? The arm length is 167 mm, which gives extended reach for many fixture layouts while preserving mechanical leverage for secure clamping. Which industries or applications suit this clamp? The clamp is appropriate for assembly, fixture building, small-batch production and repair workshops that require reliable, repeatable horizontal clamping. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive 43mm Arm, 850N Thrust 1000N Hold, Blackened Finish - Kukamet
Combine compact dimensions with robust clamping performance to keep fixtures secure and cycle times consistent; the combination of a massive holding arm and clear force ratings supports reliable production. Order the Kukamet Horizontal clamp 112 directly via Metav Werkzeuge or ask our consultants if needed. Kukamet Horizontal clamp 112 – horizontal lever clamp with massive arm and vertical-foot mounting Kukamet Horizontal clamp 112 is a horizontal lever clamp designed for integration into jigs, fixtures and assembly equipment, providing secure holding with a compact footprint. Massive holding arm for stable clamping 1000 N holding force for secure fixtures 850 N pressing force for repeatable cycles Blackened (blued) corrosion-resistant finish 43 mm arm length for compact integration Engineered clamping performance for consistent production The clamp delivers clearly specified forces: a holding force of 1000 N and a pressing force of 850 N, which ensures reproducible results in repetitive tasks. Holding force refers to the maximum static load the clamp sustains without slip, while pressing force indicates the peak clamping pressure during engagement. These numerical specifications allow planners and production engineers to match the device precisely to fixture requirements and to calculate safety margins. The measurable values reduce uncertainty in procurement and support efficient layout planning for assembly lines. Robust construction that fits into tight setups Built with a massive holding arm and a blackened (blued) finish, the clamp combines durability with low visual glare—helpful where reflective surfaces impair visual inspection. The vertical-foot base means the unit is mounted with a vertical foot, which simplifies integration into plates and bases used in tooling and fixture systems. Despite the solid construction, the component remains light at 0.114 kg, enabling compact tool nests without adding unnecessary mass. The result is a practical balance between strength and space efficiency that supports both manual and semi-automated operations. Designed for jig, fixture and repetitive assembly tasks As a lever clamp with a 43 mm arm and a fixed 90° operating angle, the device is suited to repetitive clamping cycles in production and workshop environments. The lever-style actuation gives quick engagement and reliable repeatability, reducing setup time between operations. Where short overhangs and confined spaces are common, the compact arm length and horizontal orientation make this clamp a straightforward choice for fixture designers. Clear force ratings and the simple mounting concept aid straightforward documentation and spare-part management in maintenance schedules. For procurement or technical advice on the Kukamet Horizontal clamp 112 contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for supply and integration support. Technical Data SKU: B112-1-D-C1 GTIN: 8680731509250 eClass: 21041719 ETIM: EC011973 Facts Arm length: 43 mm Angle: 90° Pressing force (max): 850 N Holding force (max): 1000 N Weight: 0.114 kg Special features Massive holding arm Vertical foot mounting Blackened (blued) finish Lever clamp design FAQ What is the maximum holding force of this clamp? The Kukamet Horizontal clamp 112 offers a maximum holding force of 1000 N, specified for static fixture retention. Can the clamp be mounted to horizontal plates? Yes, the clamp is supplied for vertical-foot mounting so it can be fastened to plates and bases used in fixture assemblies. What materials and surface protection are used? The clamp features a blackened (blued) finish on steel, providing surface protection and reduced glare during inspection. Is the clamping angle fixed or adjustable? The device is designed with a fixed 90° operating angle to ensure consistent actuation and repeatable positioning. Which SKU identifies this model for spare parts and orders? The SKU for ordering and documentation is B112-1-D-C1 for the Kukamet Horizontal clamp 112. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Arm, Safety Lock, 850 N Thrust, 1000 N Hold Force, Blackened Finish - Kukamet
Benefit from a secure, repeatable clamping solution thanks to the massive holding arm and integrated safety lock, which deliver consistent force and safe operation in fixture applications. Order the clamp directly via Metav Werkzeuge or consult our advisors for application support. Horizontal clamp 111 by Kukamet — 850 N clamping force, 90° locking The Horizontal clamp 111 is a compact, foot-mounted lever clamp designed for horizontal mounting in jigs, fixtures and workshop setups, offering reliable 90° locking for routine production and assembly tasks. Massive holding arm with safety lock Horizontal base for secure mounting 850 N clamping force for repeatable hold Blackened finish for corrosion resistance Robust clamping performance for repeatable setups The 111 clamp combines a massive holding arm with a positive locking mechanism to produce a consistent clamping force suited to repetitive tasks. With a rated pressing force of 850 N and a holding force of 1000 N, the unit separates the applied clamp force from the residual holding capacity, ensuring components remain secure after engagement. This distinction supports process stability in assembly and short-run production, reducing rework and inspection time by providing predictable workpiece retention during machining, welding or assembly operations. Compact design that simplifies fixture layout A short 43 mm arm and a horizontal foot mounting make the device easy to integrate into confined fixtures and jig plates. The compact footprint minimises interference with adjacent tooling while the 90° locking angle provides a defined end position for the lever, speeding cycle times and reducing operator variability. The relatively low mass—approximately 0.1 kg—allows multiple clamps to be installed without significantly increasing fixture weight, preserving machine dynamics and making the solution suitable for mobile fixtures or lightweight assemblies. Built for safety and reliable daily use Safety features are central to the clamp’s design: the safety lock prevents accidental release under vibration or incidental contact, and the massive arm construction reduces deformation under load. The clamp’s operational principle is intuitive—lever actuation with a defined locked position—supporting fast manual clamping while maintaining a secure hold. These attributes lower the risk of slippage during handling and support compliance with shop-floor safety practices, contributing to uninterrupted workflows. Durable finish and workshop readiness Finished in a blackened surface treatment, the clamp offers enhanced resistance to corrosion typical in humid or coolant-exposed environments. The robust finish reduces the need for frequent replacement due to surface wear, supporting long-term availability of clamping performance. Designed for straightforward mounting on a horizontal base, the device is ready for direct installation into existing fixtures, making it a practical choice for workshops seeking durable, low-maintenance clamping elements. For secure, repeatable clamping in fixtures, order the Kukamet Horizontal clamp 111 via Metav Werkzeuge — contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored technical advice and ordering support Technical data SKU: B111-1-D-L-C1 eClass: 21041719 ETIM: EC011973 Facts Arm: 43 mm Angle: 90° Weight: 0.1 kg Max pressing force: 850 N Max holding force: 1000 N Special features Mounting: horizontal base Material: blackened finish Massive holding arm Safety lock FAQ What clamping and holding forces does this clamp provide? The Kukamet Horizontal clamp 111 delivers a pressing force of 850 N and a holding force of 1000 N, providing consistent engagement and secure retention during handling and short machining steps. How is the clamp mounted and integrated into fixtures? Mounting is by a horizontal base designed for footprint installation on jig plates and fixture blocks; the unit’s compact base and 43 mm arm simplify layout in crowded assemblies. Is the locking position defined for repetitive operation? Yes, the clamp locks at a 90° lever angle, giving a repeatable end position that speeds cycle times and reduces positional variability during manual or semiautomatic processes. What finish and durability can be expected from the clamp? The clamp is supplied with a blackened finish that improves resistance to corrosion and surface wear, suitable for workshop environments with occasional exposure to coolant or humidity. Is the clamp suitable for use in small-series production and assembly? Designed with a robust holding arm and a safety lock, the 111 clamp is intended for frequent manual operation and short production runs where secure, repeatable clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Holding Arm And Safety Lock, 2.5 kN Hold Force, 2.3 kN Thrust - Kukamet
A compact horizontal toggle clamp with a massive clamping arm, safety locking mechanism and a 2,500 N holding capacity provides reliable workholding in jigs and fixtures. Benefit from secure 90° clamping, a 168 mm arm and a robust horizontal foot for efficient, repeatable production; order the clamp directly via Metav Werkzeuge or ask the consultants for integration advice. 111 Horizontal Toggle Clamp — horizontal clamp, 2,500 N holding force (Kukamet) A robust 111 Horizontal Toggle Clamp designed for secure workholding in production jigs and fixtures with a 168 mm arm and integrated safety lock. Massive clamping arm and safety lock 2,500 N maximum holding force 168 mm clamping arm length Horizontal foot mounting, 90° clamp angle Reliable clamping performance for repetitive tasks The compact lever design delivers a consistent 2,500 N holding force and a maximum pressing capacity of 2,300 N, ensuring components remain stationary during machining, welding or assembly. The element is engineered for repeatability: the massive clamping arm and the 90° clamp angle translate into predictable contact points and reduced repositioning time. In practice this means fewer rejects, less setup time and a measurable improvement in cycle stability when used in production fixtures or modular workholding systems. Straightforward mounting and durable finish for workshop use Fitted with a horizontal foot for secure attachment, the clamp integrates easily into plates, bases and jig plates without added adapters. The blackened finish gives basic corrosion resistance while keeping the footprint compact — weight is approximately 0.3 kg, so multiple units add little mass to a fixture. The robust construction and safety locking mechanism provide long service life under frequent actuation, making the clamp suitable for demanding shop-floor environments and small-batch production alike. Safety and handling that support productive workflows The safety lock prevents unintended release during handling and transport of clamped assemblies, reducing the risk of workpiece movement and operator intervention. Clear numerical capacities (holding and pressing forces) allow planners to match the clamp to the required clamping load, avoiding overspecification and ensuring efficient use of materials and space. The lever clamp concept supports rapid actuation — a practical advantage for applications that prioritise throughput without compromising secure fixation. Specify the Kukamet 111 in fixture layouts and contact Metav Werkzeuge for technical guidance and prompt supply from Emmerich. Technical Data Article number: B111-3-D-L-C3 Model: 111 Brand: Kukamet Facts Clamping arm length: 168 mm Weight: 0.3 kg Max pressing force: 2,300 N Max holding force: 2,500 N Clamp angle: 90° eClass: 21041719 ETIM: EC011973 Special features Massive clamping arm Safety locking mechanism Horizontal foot mounting Blackened finish Compact lever clamp design FAQ What is the maximum holding force of the clamp? The Kukamet 111 horizontal clamp provides a maximum holding force of 2,500 N as specified for secure fixture workholding. Can the clamp be mounted on standard jig plates? Yes, the product’s horizontal foot mounting is designed for direct attachment to jig plates and bases without special adapters. Is the clamp suitable for high-cycle production use? The massive clamping arm and safety locking mechanism make the Kukamet 111 suitable for frequent actuation and repetitive production tasks. What are the key dimensions to consider for integration? Important dimensions include the 168 mm clamping arm length and the 90° clamp angle; these determine reach and seating within fixtures. Does the finish offer corrosion protection? The blackened finish gives basic protection suited to workshop environments; specific corrosion resistance requirements should be confirmed for specialised applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com