Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
90° Horizontal Clamp With Massive Holding Arm And Safety Lock, 2.5 kN Hold Force, 2.3 kN Thrust - Kukamet
Benefit from a robust combination of a massive holding arm, a secure safety lock and a compact 108 mm reach for dependable fixture clamping; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal toggle clamp 113 — 108 mm arm, safety locking mechanism by Kukamet A compact horizontal toggle clamp 113 for secure workpiece fixation in jigs, fixtures and assembly stations at a 90° orientation Massive holding arm Safety locking mechanism 108 mm reach Holding force up to 2,500 N Consistent clamping that speeds up production The horizontal toggle clamp delivers repeatable fixation through a robust mechanical design that reduces repositioning time. The combination of a massive holding arm and a secure safety lock ensures a stable hold during repetitive operations, which translates into fewer rejects and faster cycle times. The arm reach of 108 mm permits versatile positioning in confined fixtures; the compact footprint supports tight nest layouts without compromising accessibility. Built for safety and longevity on the shop floor Aimed at workshop and industrial use, the clamp features a mechanical lock that prevents accidental release once engaged, increasing process safety. The blackened finish provides a wear-resistant surface treatment suited to everyday handling, while the construction supports a holding capacity of 2,500 N and a clamping force rating of 2,300 N, values that indicate suitability for medium-duty securing tasks. The robust design minimises maintenance needs and extends service intervals in busy production environments. Straightforward mounting and integration into jigs Mounting is carried out via an angle foot that fixes the device at a 90° orientation, simplifying alignment in bespoke fixtures and enabling quick retrofitting to existing workstations. The compact weight of 0.42 kg reduces added load on fixture frames, and the toggle principle allows rapid manual operation with clear mechanical feedback. For applications that require reliable holding without complex pneumatics, this mechanical clamp offers an economical and durable solution. For fixtures that demand secure, repeatable clamping choose the Kukamet 113 — contact Metav Werkzeuge for tailored technical guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: B113-3-D-L-C2 Manufacturer: Kukamet Category: Toggle clamp / horizontal clamp Data Arm length: 108 mm Clamping force (max): 2,300 N Holding force (max): 2,500 N Weight: 0.42 kg Angle: 90° eClass: 21041719 ETIM: EC011973 Special features Material/finish: blackened finish Mounting: angle foot Heavy-duty holding arm Safety locking mechanism Compact, manual toggle operation FAQ What clamping and holding forces does this clamp provide? The Kukamet horizontal toggle clamp 113 (SKU B113-3-D-L-C2) specifies a clamping force of up to 2,300 N and a holding force of up to 2,500 N. Is the clamp suitable for use in jigs and fixtures on an assembly line? Yes, the robust arm and safety lock make the clamp suitable for jigs and fixtures where manual or semi-automatic fixture clamping is required. How is the clamp mounted and positioned? The device uses an angle foot mounting for 90° orientation and offers a reach of 108 mm for adaptable positioning within fixtures. What is the surface finish and expected durability? The clamp has a blackened finish designed for wear resistance during regular workshop use and a construction aimed at long service life. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Holding Arm, 2.3 kN Thrust, 2.5 kN Holding Force, Blackened Steel - Kukamet
Take advantage of the combination of a robust holding arm, compact dimensions and reliable clamping performance to streamline fixture assembly and production jigs; order the Horizontal clamp 113 directly via Metav Werkzeuge or ask our consultants if technical clarification is required. Horizontal clamp 113 — Kukamet horizontal clamping lever with 2,500 N holding capacity A Horizontal clamp 113 designed for right-angle fixture mounting and fast, repeatable clamping in workshop and production environments. *Massive holding arm for sustained stability *58 mm arm length for compact clamping *Up to 2,500 N holding force *Right-angle base (90°) for secure mounting Consistent clamping performance for precision work The 113 horizontal lever clamp delivers measured clamping and holding values that support reproducible processes: a maximum clamping force of 2,300 N with a holding force of 2,500 N, enabling secure fixation of components during machining or assembly. The lever action converts operator input into a stable clamping result, reducing cycle-time variability and improving process repeatability. For batch production and jigs where consistent pressure is essential, this clamp contributes to fewer rejects and steadier component positioning. Space-saving design that simplifies jig construction A short arm and compact footprint make the clamp particularly suitable where space is constrained on modular fixturing plates. The 58 mm arm length and overall low mass of 0.37 kg allow integration into tight assemblies without adding excessive inertia. The right-angle mounting foot provides a stable interface to fixture plates at 90°, enabling predictable alignment during installation and helping to save board or table surface area while maintaining access for tools and operators. Durable finish and robust mechanical construction Built with a robust holding arm and a black oxide finish, the clamp resists wear from repeated operation and provides a subdued, anti-reflective surface that minimises shop-floor glare. The solid construction ensures that the clamping geometry remains stable under repeated load cycles, supporting long service intervals and predictable maintenance schedules. The lever mechanism is engineered for quick engagement and reliable retention, supporting both frequent manual use and integration into semi-automatic assembly workflows. Practical applications and straightforward installation The clamp is designed for use in jigs, fixtures and tooling stations where horizontal lever action and secure right-angle mounting are required. Installation is simplified by the angle base which offers a fixed 90° orientation, and the compact dimensions make retrofitting into existing fixture layouts straightforward. Where quick manual operation and dependable holding are priorities, this lever clamp offers a low-complexity solution that integrates easily into standard clamping arrangements and reduces set-up time per job. Request a technical consultation from Metav Werkzeuge to specify the ideal clamping layout for your application or to place an order for Kukamet Horizontal clamp 113 (SKU B113-3-D-C1) Technical data SKU: B113-3-D-C1 GTIN: 8680731507454 Manufacturer: Kukamet eClass: 21041719 ETIM: EC011973 Facts Arm length: 58 mm Weight: 0.37 kg Angle: 90° Maximum clamping force: 2,300 N Maximum holding force: 2,500 N Special features Mounting: angle base (right-angle foot) Finish: black oxide Massive holding arm Category: horizontal clamp / lever clamp FAQ What clamping forces can be expected from this clamp? The Kukamet Horizontal clamp 113 delivers a maximum clamping force of 2,300 N and a maximum holding force of 2,500 N, suitable for securing components in jigs and fixtures. How is the clamp mounted to a fixture plate? Mounting is via a right-angle base (90° angle foot) that provides a stable interface for connection to fixture plates and ensures consistent alignment. Is the clamp suitable for compact fixture designs? Yes. The 58 mm arm length and overall compact construction make the clamp well suited to tight layouts and retrofitting into existing jig systems. What surface protection does the clamp have? The clamp is finished with a black oxide (blackened) surface that enhances wear resistance and reduces reflective glare on the shop floor. Which SKU should be ordered for this model? Order using SKU B113-3-D-C1 for the Kukamet Horizontal clamp 113 to ensure the correct model and spec are supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Holding Arm, 5000 N Holding Force, Galvanised - Kukamet
Take advantage of the combination of a massive holding arm, high clamping capacity and corrosion-resistant finish for dependable fixture performance. Order the clamp directly via Metav Werkzeuge or consult the specialists for specification matching and rapid delivery. Horizontal clamp 113 — Kukamet toggle clamp with zinc-plated finish and 5,000 N holding force The Horizontal clamp 113 is a 90° toggle clamp designed for robust workholding in production jigs and assembly fixtures Robust solid holding arm 5,000 N maximum holding force 4,500 N maximum clamping force 217 mm reach arm length Zinc-plated corrosion protection Secure clamping that reduces rework and boosts throughput The clamp delivers 5,000 N of maximum holding force and a clamping pressure of 4,500 N, providing a secure connection between workpiece and fixture. The massive holding arm transfers force evenly, which reduces movement during machining and assembly and thus lowers the risk of rejects. Specified forces allow planners to calculate safety margins and cycle reliability, supporting efficient production sequences and measurable process stability. Rapid integration into fixtures and compact set-ups With an effective 217 mm reach and a dedicated angle foot mounting, this toggle clamp mounts cleanly to perpendicular jig plates and workbench edges. The 90° orientation simplifies positioning in common fixture geometries and the unit’s modest mass (approx. 1.906 kg) eases handling during assembly. These attributes shorten installation time, simplify retrofits and minimise fixture redesign, enabling faster changeovers and consistent part locating. Built to last in workshop conditions Constructed from zinc-plated steel, the clamp resists corrosion in workshop atmospheres while remaining straightforward to maintain. The robust construction supports repetitive cycles in production environments without frequent replacement, improving total cost of ownership through longevity and reduced downtime. Traceable identification is provided for stockkeeping and planning, supporting transparent logistics and predictable inventory management. Contact Metav Werkzeuge for specification advice or a tailored quotation for the Kukamet Horizontal clamp 113 with angle-foot mounting and 217 mm reach Technical Data SKU: 113-5-D-C3 GTIN: 8680731501032 Manufacturer: Kukamet Core specifications Arm length: 217 mm Maximum holding force: 5,000 N Maximum clamping force: 4,500 N Weight: 1.906 kg Angle: 90° Features & materials Material: Zinc-plated steel Mounting: Angle foot Solid heavy-duty holding arm eClass: 21041719 ETIM: EC011973 FAQ What clamping and holding forces does the clamp provide? The Kukamet Horizontal clamp 113 offers a maximum holding force of 5,000 N and a maximum clamping force of 4,500 N, values that support secure positioning in jigs and fixtures. How is the clamp mounted to a fixture? Mounting is via an angle foot, designed for 90° attachment to fixture plates or bench edges, allowing neat integration into standard jig designs. What is the reach of the clamping arm? The clamp has a 217 mm arm reach, suitable for a wide range of part sizes and for applications that require extended access from the mounting plane. What material is the clamp made from and how resistant is it to corrosion? The clamp is manufactured from zinc-plated steel, providing enhanced corrosion resistance for typical workshop and production environments. Is the clamp suitable for repetitive production cycles? Yes, the heavy-duty design with a massive holding arm and zinc-plated finish is intended for repetitive use in industrial and workshop fixtures, delivering consistent performance over time. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Holding Arm, 5 000 N Hold, 4 500 N Press Force, Blackened - Kukamet
Robust construction with a massive holding arm, 5,000 N holding force and a secure safety lock delivers consistently reliable clamping in repetitive production tasks; the compact 229 mm arm and horizontal foot simplify fixture integration. Order the clamp directly via Metav Werkzeuge or request technical advice from our consultants in Emmerich. Horizontal clamp 111 — 5,000 N holding force, 229 mm arm (Kukamet) The Horizontal clamp 111 is a horizontal lever clamp engineered for secure workpiece holding in jigs and fixtures, combining a massive holding arm with a mechanical safety lock for reliable industrial use. Solid holding arm and safety lock 5,000 N maximum holding force 4,500 N clamping force Horizontal foot for stable mounting Consistent, measurable clamping for repeatable results The lever design provides a clearly defined clamping force, delivering 4,500 N of clamping action while the device maintains a 5,000 N holding force when locked. These values translate into lower micro-movement and improved positional stability, which supports higher repeatability in batch production and reduces rework. The distinction between clamping and holding force is practical: clamping force is the active pressing force during engagement, while holding force describes the secured state after the safety lock is applied, ensuring parts remain stationary during machining or inspection. Durable mechanics that fit workshop workflows A massive holding arm with an integrated safety lock and a horizontal foot for mounting create a compact yet robust fixture element. The 229 mm arm gives sufficient reach for most jig arrangements without adding unnecessary bulk, while the black oxide finish increases surface resistance to handling and workshop conditions. The unit’s construction focuses on low-maintenance durability: wear-critical components are concentrated in the lever mechanism so that routine inspections are quick and replacement parts can be serviced without long downtimes. Faster setups and safer operation for frequent cycles The 90° lever geometry produces a controlled toggle action that converts operator effort into high clamping efficiency while limiting over-travel. This results in shorter setup times and reduced operator fatigue when used in repeated clamping cycles. The integrated safety lock adds a passive layer of protection that prevents unintentional release, making the device suitable for both production lines and precision assembly stations. The combination of swift handling and mechanical security supports higher throughput without compromising operator confidence. For procurement or detailed specification support for the Kukamet Horizontal clamp 111, contact Metav Werkzeuge in Emmerich for reliable supply and expert advice Technical data Article number: B111-5-D-L-C3 Model: 111 Type: Horizontal clamp Finish: black oxide Mounting: horizontal foot Facts Arm length: 229 mm Clamping force (max): 4,500 N Holding force (max): 5,000 N Angle: 90° Weight: 1.4 kg eCl@ss: 21041719 ETIM: EC011973 Special features Massive holding arm and safety lock Horizontal foot for stable mounting Lever (toggle) action for efficient operation Robust workshop finish Category: Clamps FAQ What are the clamping and holding forces of this clamp? The clamping force is 4,500 N and the holding force is 5,000 N for the Kukamet Horizontal clamp 111 (SKU B111-5-D-L-C3), values that support secure positioning in fixtures. How is the clamp mounted to a jig or workbench? Mounting is via a horizontal foot; the Horizontal clamp 111 is designed for stable attachment to fixture plates and jig bases. Is the clamp suitable for repetitive production use? Yes, the lever (toggle) geometry and the massive holding arm make the Kukamet clamp suitable for frequent cycles and short setup times in production environments. What finish does the clamp have and why does it matter? The clamp is supplied with a black oxide finish, which improves surface resistance to handling and workshop conditions and contributes to longer service life. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Holding Arm, Safety Lock, 1,200 N Hold Force, 1,000 N Thrust - Kukamet
Combining a 116 mm solid holding arm, a safety locking mechanism and reliable clamping up to 1,000 N, this horizontal toggle clamp ensures secure, repeatable fixation for jigs and fixtures; order directly via Metav Werkzeuge or contact the consultants for application guidance. Horizontal toggle clamp 111 – horizontal clamp with 116 mm arm and safety lock (Kukamet) A robust horizontal clamping solution, the Horizontal toggle clamp 111 is designed for secure workpiece retention in assembly, welding and fixture applications, offering a compact footprint and rapid manual operation. Robust 116 mm solid holding arm Safety locking mechanism for secure clamping Horizontal foot mounting for stable setup Clamping force up to 1,000 N Lightweight: 0.2 kg for easy positioning Consistent force and clear load ratings for process reliability The clamp delivers a clearly defined clamping force of 1,000 N and a maximum holding force of 1,200 N, values that allow straightforward capacity planning for production jigs and small-batch fixtures. Specified forces denote two different functions: the clamping force refers to the active force applied during engagement, while the holding force indicates the resistance to displacement under load. This separation supports reliable selection for applications where repeatable tension and secure retention are essential, reducing the need for trial-and-error in the workshop. Space-efficient mounting that streamlines fixture design With horizontal foot mounting and a working angle of 90°, the device integrates into compact toolings and table-mounted fixtures without obstructing adjacent components. The combination of a short 116 mm arm and a total weight of 0.2 kg permits close-packed layouts and quick manual handling during set-up changes. The modest mass also helps when arranging multiple clamps across a jig plate, keeping clamping points accessible and simplifying adjustments during assembly tasks. Durable construction and inbuilt safety to cut downtime Constructed with a solid holding arm and finished in a blackened finish, the clamp is engineered for long service life in demanding workshop environments. The safety lock prevents inadvertent release during machining or handling, thereby reducing the risk of loose workpieces and unplanned interruptions. Together these features support a low-maintenance workflow: robust mechanics minimise wear-related adjustments, while positive locking increases operator confidence in repeated processes. For secure and repeatable clamping in production fixtures, rely on Kukamet quality — contact Metav Werkzeuge for order placement or application consultation at info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: B111-2-D-L-C2 Manufacturer: Kukamet EClass: 21041719 ETIM: EC011973 Facts Arm length: 116 mm Working angle: 90° Clamping force (max): 1,000 N Holding force (max): 1,200 N Weight: 0.2 kg Special features Mounting: horizontal foot Material / finish: blackened finish Solid holding arm Safety locking mechanism FAQ What clamping and holding forces does this clamp provide? The Kukamet horizontal toggle clamp 111 (SKU B111-2-D-L-C2) supplies a maximum clamping force of 1,000 N and a maximum holding force of 1,200 N. How is the clamp mounted to a fixture or workbench? Mounting is via a horizontal foot, designed for bolting to jig plates or table surfaces for a stable attachment. What are the key dimensions relevant for fixture design? Relevant dimensions include an arm length of 116 mm and a working angle of 90°, together with a compact mass of 0.2 kg. Does the clamp include a device to prevent accidental release? Yes, the unit features a safety locking mechanism that secures the clamped position and reduces the risk of unintended opening. Which workshop applications suit this clamp best? The clamp is suited to assembly jigs, welding fixtures and small-batch production where compact, repeatable clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Holding Arm, Safety Lock, 1,200 N Hold, 1,000 N Closing Force - Kukamet
Rely on the compact 90° horizontal clamp with a massive holding arm and a safety latch for secure, repeatable fixturing; its high holding force and slim footprint support efficient jig design. Order the Horizontal clamp 111 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 111 — 90° horizontal lever clamp with 166 mm arm by Kukamet The Horizontal clamp 111 is a compact 90° horizontal lever clamp designed for secure fixation of small workpieces in jigs, fixtures and assembly stations. Massive holding arm and safety lock 90° horizontal mounting foot Max holding force 1,200 N Consistent clamping for repeatable production The clamp delivers a reliable holding force of up to 1,200 N with an actuation force rated at 1,000 N, engineered to maintain secure contact under cyclic use. The combination of a massive holding arm and a mechanical safety latch reduces the risk of unintentional release, which supports process stability and reduces rework. These mechanical properties are presented as measurable values to aid in fixture design and process planning. Space-saving design that simplifies jig integration With an arm length of 166 mm and a 90° horizontal mounting foot, this clamp occupies minimal lateral space while still providing robust clamping. The compact footprint and low weight (approx. 0.2 kg) enable straightforward incorporation into tight fixtures and modular tooling systems. The horizontal mounting orientation supports common fixture geometries, allowing equipment designers to optimise throughput without complex adaptations. Durable finish and robust mechanical construction The component is finished in a blackened surface that provides basic corrosion resistance and a professional appearance. The massive arm construction increases rigidity and reduces deflection, improving positional accuracy of the clamped part. Where repeatable positioning and long service life are required, this lever clamp offers a low-maintenance solution that integrates easily into industrial jigs and manual assembly rigs. For proven clamping reliability from Kukamet, request a technical quote or discuss fixture integration with Metav Werkzeuge in Emmerich — our consultants provide tailored advice and delivery from stock Technical data SKU: B111-2-D-L-C3 Model: 111 Product: Horizontal clamp Manufacturer: Kukamet Facts Arm length: 166 mm Max actuation force: 1,000 N Max holding force: 1,200 N Angle: 90° Weight: 0.2 kg ECLASS: 21041719 ETIM: EC011973 Special features Mounting: horizontal foot Finish: blackened Massive holding arm Safety latch Lever-style clamp suitable for jigs and fixtures FAQ What maximum holding force does the Horizontal clamp 111 provide? The Horizontal clamp 111 provides a maximum holding force of 1,200 N and an actuation force of 1,000 N for secure fixation in jigs and fixtures. Is the clamp suitable for tight fixture spaces? Yes, the compact design with a 166 mm arm and a 90° horizontal mounting foot allows integration into confined fixture layouts while maintaining rigidity. What protection does the finish offer against corrosion? The blackened finish on the clamp offers basic corrosion resistance and a robust surface for workshop use without specialised coatings. Can the clamp be used in repetitive assembly operations? The combination of a massive holding arm and safety latch makes the clamp well suited for repetitive clamping cycles in production and assembly environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Holding Arm, Safety Lock, 2.3 kN Thrust, Galvanised - Kukamet
The combination of a galvanised construction, a massive holding arm and an integrated safety lock ensures reliable long-term clamping at a fixed 90° angle; the compact 168 mm arm and low weight support fast fixture changes and repeatable cycles. Order the Kukamet 111 horizontal clamp directly via Metav Werkzeuge or consult our specialists for application-specific advice. Kukamet 111 horizontal clamp – galvanised lever clamp with safety lock The 111 horizontal clamp is a horizontal lever clamp designed for secure 90° holding in jigs and fixture plates, suited to repetitive production, assembly and welding tasks. Robust galvanised construction Massive holding arm with safety lock Horizontal foot mounting for stable installation Consistent, measurable clamping for production use Built for predictable results, this lever clamp delivers clear numerical performance: a maximum pressing force of 2300 N and a maximum holding force of 2500 N, values that translate into secure workpiece retention during machining or assembly. The defined forces reduce variation in clamping pressure, which in turn supports process stability and fewer rejects. For production planning, these figures enable direct comparison with existing fixtures and clear specification of clamping capacity for component handling. Durable materials and integrated safety for everyday workshop demands Constructed from galvanised steel and fitted with a massive holding arm, the device resists corrosion and maintains functional integrity in demanding environments. The built-in safety lock prevents accidental opening under load, offering an operational safeguard during handling and transport of clamped parts. Together, these characteristics reduce maintenance intervals and contribute to a longer service life, lowering total cost of ownership in small-batch and continuous manufacturing contexts. Compact design that simplifies fixture integration With an arm length of 168 mm and a compact overall mass of 0.3 kg, the clamp combines leverage with low bulk, allowing integration into tight jigs and modular fixtures without excessive added mass. The horizontal foot mounting ensures a stable attachment point on fixture plates or tooling bars and keeps the clamping motion parallel to the workpiece plane. This compact form factor speeds cycle times by making manual or pneumatic actuation straightforward and aids ergonomic handling during frequent set-ups. For secure, long-lasting clamping choose the Kukamet 111 via Metav Werkzeuge — contact our Emmerich-based specialists for tailored fixture advice and reliable supply from stock. Technical data SKU: 111-3-D-L-C3 GTIN: 8680731500196 Model: 111 Key figures Arm length: 168 mm Closing angle: 90° Max pressing force: 2300 N Max holding force: 2500 N Weight: 0.3 kg eClass: 21041719 ETIM: EC011973 Materials & features Material: galvanised Mounting: horizontal foot Solid holding arm and safety lock Suitable for repetitive clamping and fixture use FAQ What clamping forces can be expected from this clamp? The Kukamet 111 horizontal clamp provides a maximum pressing force of 2300 N and a maximum holding force of 2500 N, suitable for secure retention in many fixture applications. How is the clamp mounted in a fixture? Mounting is via a horizontal foot; the horizontal foot design allows stable attachment to fixture plates or tooling bars for parallel clamping action. Is the clamp suitable for use in humid or corrosive environments? The galvanised finish on the Kukamet 111 offers improved corrosion resistance compared with untreated steel, supporting use in workshops where exposure to moisture occurs. Can the clamp prevent accidental release during handling? Yes, the clamp is fitted with a safety locking mechanism and a massive holding arm that together reduce the risk of unintended opening under load. What are the physical dimensions relevant to fixture design? Key dimensions for planning are an arm length of 168 mm and a closing angle of 90°, with a compact weight of 0.3 kg for straightforward integration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Holding Arm, Safety Lock, 2300 N Thrust, 2500 N Grip, Blackened Finish - Kukamet
Take advantage of the combination of robust clamping performance, a compact 68 mm arm and an integrated safety lock for secure, repeatable fixturing. Benefit from a lightweight design that simplifies installation while delivering 2,300 N closing force and 2,500 N holding force for demanding workshop and production tasks. Order the horizontal lever clamp directly via Metav Werkzeuge or ask our consultants if needed. Kukamet Horizontal lever clamp 111 — compact 90° horizontal clamping with safety lock A Kukamet horizontal lever clamp designed for secure fixture clamping in production and assembly; features a massive holding arm and horizontal foot mounting for stable installation Massive holding arm and safety lock 68 mm arm for compact fixture design 2,300 N closing force, 2,500 N holding force Horizontal foot mounting for simple installation Reliable clamping performance for consistent production results The clamp delivers a clear technical advantage with a 2,300 N closing force combined with a 2,500 N holding force, providing dependable restraint during machining, assembly and testing tasks. The difference between closing and holding force is explained by the clamping geometry and locking mechanism: the first refers to the actuation force applied when engaging the clamp, while the latter indicates the sustained force that keeps the workpiece secure once the clamp is locked. The massive holding arm contributes to rigidity under load and reduces elastic deformation, which helps maintain repeatability across multiple cycles. These characteristics support efficient process control and reduce rework caused by movement under load. Compact design that saves space and speeds up fixture assembly With a 68 mm arm and a 90° swivel orientation, this clamp is tailored for confined setups and multi-clamp jigs where footprint matters. The horizontal foot mounting enables direct attachment to fixture plates or tooling blocks without complex adapters, cutting assembly time and simplifying toolroom logistics. At just 0.3 kg, the unit is lightweight enough to reposition during tooling optimisation but sturdy enough to withstand regular industrial use. The blackened finish provides a protective surface that minimises visible wear and offers straightforward visual inspection of the clamping surface over time. Practical safety and ergonomic benefits for workshop use Ergonomics and operational safety are addressed by the built-in safety lock, which prevents accidental release during handling or vibration-heavy processes. The clamp's 90° lever action suits manual or semi-automatic actuation, allowing quick engagement and release while maintaining a low profile in the fixture. The combination of a lever clamp mechanism and a massive holding arm creates a balance between fast operation and secure locking, which is particularly valuable in repetitive production runs and assembly lines where cycle time and operator safety are both priorities. Contact Metav Werkzeuge for advice on integrating the Kukamet Horizontal lever clamp 111 into existing fixtures or for availability from the Emmerich warehouse Technical data Article number: B111-3-D-L-C1 ECLASS: 21041719 ETIM: EC011973 Core specifications Arm length: 68 mm Angle: 90° Closing force: 2,300 N Holding force: 2,500 N Weight: 0.3 kg Materials & special features Surface: blackened finish Mounting: horizontal foot Feature: massive holding arm Feature: safety lock Product type: lever clamp FAQ What clamping forces does this clamp provide? The Kukamet Horizontal lever clamp 111 provides a closing force of 2,300 N and a holding force of 2,500 N, ensuring secure retention once locked. Is the clamp suitable for confined or compact fixtures? Yes, the compact 68 mm arm and 90° orientation make the clamp well suited to tight fixture designs and multi-clamp jigs. How is the clamp mounted to a fixture plate? Mounting is via a horizontal foot, allowing direct fixation to tooling plates or blocks without additional adapters. Does the clamp include a safety mechanism to prevent accidental release? The unit is equipped with an integrated safety lock that prevents unintentional opening under vibration or during handling. What finish and weight can be expected for the clamp? The clamp features a blackened finish and weighs approximately 0.3 kg, balancing durability with easy handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Massive Holding Arm, Safety Lock, 850 N Thrust / 1,000 N Hold - Kukamet
Take advantage of a compact, high‑performance clamp that combines robust holding power and a secure safety lock for reliable fixture work. The design and mounting options support efficient jigs and repeatable clamping cycles. Order the horizontal clamp directly via Metav Werkzeuge or consult the team for specification advice. Horizontal clamp 113 — Kukamet horizontal lever clamp with 90 mm arm and 1,000 N holding force Horizontal clamp 113 is a horizontal lever clamp designed for secure workholding in fixtures, jigs and assembly aids Robust 90 mm holding arm Up to 1,000 N holding force Safety locking mechanism Angle foot mounting at 90° Consistent clamping for repeatable production The compact lever clamp delivers consistent, measurable holding power that reduces rework and speeds up cycle times. With a 90 mm arm and a holding force of 1,000 N, the device is suited to small to medium fixture tasks where repeatability matters. The lever action converts operator input into reliable clamping force, while the moderate overall mass keeps the component inert in automated or manual setups. The blackened finish provides corrosion resistance and a professional appearance in the work environment. Safety features that protect processes A safety locking mechanism prevents unintended opening during machining or handling, contributing to operator confidence and fewer stoppages. The clamp’s 850 N maximum pressing force ensures firm contact without excessive stress on delicate workpieces, enabling controlled clamping for a range of materials. The positive lock also facilitates safe unclamping procedures during tool changes and part removal, supporting a smoother workflow and lower risk of accidental release. Compact mounting for space‑conscious fixtures Designed with an angle foot (Winkelfuß) for 90° installation, this clamp integrates cleanly into vertical or horizontal fixture plates. The lightweight construction (approx. 0.155 kg) minimises added mass on moving assemblies while the massive holding arm provides the rigidity required for stable contact. Where space is limited, the clamp offers a compact footprint without compromising on effective force transmission or locking reliability. Practical choice for workshop and production environments Built as a lever clamp for general clamping applications, the model supports rapid fixturing and repeated part handling. The blackened finish resists wear and keeps components presentable in a production setting. Thanks to straightforward mechanics and proven clamping geometry, the device is easy to integrate into existing jigs and fixtures, reducing engineering time and enabling faster set‑ups. For procurement or technical enquiries about Kukamet’s horizontal clamp 113, contact Metav Werkzeuge for sourcing and specification assistance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: B113-1-D-L-C2 Manufacturer: Kukamet Model: 113 Category: Spanner eClass: 21041719 ETIM: EC011973 Facts Arm length: 90 mm Holding force: 1,000 N Maximum pressing force: 850 N Weight: 0.155 kg Angle: 90° Special features Angle foot mounting (Winkelfuß) Blackened finish Massive holding arm Safety locking mechanism Lever clamp type Storytrigger: lever clamp FAQ What clamping forces does the clamp provide? The Horizontal clamp 113 from Kukamet offers a holding force of 1,000 N and a maximum pressing force of 850 N, suitable for many fixture applications. How is the clamp mounted in a fixture? Mounting is via an angle foot designed for 90° installation, enabling straightforward integration into plates and jig assemblies. What is the arm length and overall weight? The holding arm measures 90 mm, and the clamp weighs approximately 0.155 kg, making it compact and lightweight for tight setups. Does the clamp include a safety feature to prevent accidental release? Yes, the device incorporates a safety locking mechanism to secure the clamped position during handling and processing. What finish and material protection does the product have? The clamp is supplied with a blackened finish that offers basic surface protection and a uniform appearance for workshop use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Metal Handle, Vertical Foot, Stainless Steel, 450 N Thrust / 520 N Holding - Kukamet
Take advantage of a compact, corrosion-resistant toggle clamp that combines stainless steel construction with reliable holding performance — ideal for repetitive fixture work where space and durability matter. Use the robust vertical mounting foot and M4x25 pressure spindle to integrate the clamp into jigs and fixtures quickly; order the Kukamet clamp directly via Metav Werkzeuge or consult our specialists for specification support. Horizontal toggle clamp "112" (S112-0-M) — stainless steel, 520 N holding force (Kukamet) The Horizontal toggle clamp "112" secures components at a 90° angle with a vertical mounting foot and a metal handle, intended for jigs, fixtures and repeatable holding tasks in light to medium-duty production Stainless steel construction 520 N holding force 450 N clamping force Vertical mounting foot Metal handle for durable grip Consistent clamping for precision work The toggle design delivers repeatable holding with clearly specified force values: a maximum holding force of 520 N and a clamping push of 450 N, both measured for reliable fixture performance. The presence of an M4x25 pressure spindle allows fine adjustment of contact pressure, so the clamp can be tuned to the workpiece without reconfiguring the fixture. This precision reduces part movement during machining or assembly and supports consistent quality control in serial processes. Built to last in workshop environments Constructed from stainless steel, the clamp resists corrosion and wear where regular cleaning or humid conditions are expected. A metal handle increases durability under frequent actuation and keeps the control feel consistent over long production runs. Despite robust materials, the device is compact and lightweight (0.042 kg), which simplifies placement on small fixtures and reduces added mass on movable tooling plates. Quick integration into jigs and fixtures The clamp’s vertical mounting foot and 90° actuation angle make it straightforward to incorporate into existing setups or new bespoke fixtures. Installation is aided by standardised connection points and the adjustable M4x25 pressure spindle, permitting a close fit against various workpiece geometries. The compact form factor also allows multiple clamps to be positioned closely for multi-point support without obstructing tool access, increasing process flexibility on benches and CNC fixtures alike. Specify the Kukamet horizontal toggle clamp "112" through Metav Werkzeuge for robust, space-saving clamping — contact Metav Werkzeuge in Emmerich for technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S112-0-M GTIN: 8680731508932 Manufacturer: Kukamet Facts Weight: 0.042 kg Clamping force (max): 450 N Holding force (max): 520 N Angle: 90° Pressure spindle: M4x25 eClass: 21041719 ETIM: EC011973 Special features Material: stainless steel Vertical mounting foot Metal handle Designed for jig and fixture use FAQ What holding force does the clamp provide? The Kukamet horizontal toggle clamp "112" provides a maximum holding force of 520 N for secure fixation during light to medium-duty operations. Is the clamp suitable for humid or corrosive workshop conditions? Yes, the clamp is made from stainless steel, giving the device increased resistance to corrosion and making it suitable for harsher shop environments. How is contact pressure adjusted? Contact pressure is adjusted via the M4x25 pressure spindle; this enables fine tuning of clamp contact without altering the fixture. Can the clamp be mounted to a fixture plate? The clamp features a vertical mounting foot designed for straightforward attachment to plates and bespoke jigs, supporting compact layouts. What is the difference between clamping force and holding force for this clamp? Clamping force (450 N) refers to the push applied by the spindle during locking, while holding force (520 N) indicates the maximum resistance to pull-out once the clamp is engaged. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Safety Lock, 1,000 N Clamping Force, 1,200 N Holding Force, Blackened - Kukamet
Take advantage of the combination of robust holding performance, a compact, horizontal-foot mounting and an integrated safety lock for reliable, repeatable clamping in production and assembly. Benefit from quick integration into existing fixtures and a low component weight that reduces handling time. Order the horizontal clamp directly via Metav Werkzeuge or ask the Metav consultants for application advice. Horizontal clamp 111 — Kukamet horizontal lever clamp with safety lock and M6 spindle A Horizontal clamp 111 designed for secure, repeatable workholding in machining, jigs and assembly fixtures where space and reliability matter Horizontal foot mounting for stable installation Integrated safety lock for secure clamping 1,200 N holding force for reliable fixation Compact blackened finish with M6x40 spindle Secure clamping that speeds up set-up and prevents slips The 1,200 N holding force combined with a rated pressing force of 1,000 N provides a dependable margin for routine workshop and light industrial tasks. The integrated safety lock prevents accidental release during handling or vibration-prone operations, reducing the risk of part movement and rework. In practice, these attributes mean fewer interrupted cycles and a steadier production flow; the performance figures serve as objective, comparable values when selecting components for fixtures or assembly stations. Compact design for straightforward integration and fast installation A horizontal foot mounting allows the clamp to be screwed directly to plates and tooling bases, keeping the footprint minimal. The M6x40 spindle enables precise clamping travel and easy replacement with standard hardware, while the unit’s 0.225 kg mass reduces strain during fixture assembly and simplifies jig design. This compact construction supports quick retrofitting into existing setups, lowering downtime and making the clamp suitable for both mobile jigs and fixed production tooling. Durable finish and right‑angle geometry for versatile use The blackened finish offers corrosion resistance and a low-reflective surface that is practical in machining and inspection areas. The 90° clamping geometry provides a predictable lever path for repeatable engagement, useful when arranging multiple clamps in a confined grid. The lever-clamp concept delivers a tactile, mechanical action that is simple to inspect and maintain; this transparency helps workshops predict maintenance needs and keep throughput consistent. Contact Metav Werkzeuge to discuss how the Kukamet 111 horizontal clamp can improve fixture reliability and set-up speed at your workbench — Metav’s specialists advise on application and compatibility Technical data SKU: B111-2-L GTIN: 8680731506983 Manufacturer: Kukamet Facts Max pressing force: 1,000 N Max holding force: 1,200 N Angle: 90° Weight: 0.225 kg Spindle: M6x40 Special features Mounting: horizontal foot Safety lock: integrated Finish: blackened (Schwarz brüniert) Design: lever clamp FAQ What is the maximum holding capacity of this clamp? The Kukamet Horizontal clamp 111 has a maximum holding force of 1,200 N and a pressing force rating of 1,000 N for secure fixation in typical workshop applications. Is the clamp suitable for fixture plates and jigs? Yes, the horizontal-foot mounting and compact form factor make the clamp well suited for fixture plates, jigs and assembly tooling where a low profile is required. What does the M6x40 spindle specify? The M6x40 specification refers to the clamping spindle thread and length; the M6x40 spindle allows standard replacements and fine adjustment of clamping travel. Does the clamp include a safety feature to prevent accidental release? Yes, the unit is supplied with an integrated safety lock, which secures the lever in the clamped position and reduces the risk of unintended opening. Which surface finish is applied and what benefit does it bring? The clamp is finished blackened, providing corrosion resistance and a subdued surface that is practical in production and inspection environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Safety Lock, 1,000 N Closing Force, Stainless Steel - Kukamet
Combining stainless steel construction, a safety lock and up to 1,000 N clamping force, this horizontal clamp delivers secure, repeatable workholding for light industrial fixtures; Order the Horizontal clamp 111 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 111 — stainless steel horizontal-foot clamp with safety lock (Kukamet) Horizontal clamp 111 is a lever-style horizontal clamp intended for light-duty workholding and assembly jigs, offering a compact footprint and a 90° lever for fast locking. Stainless steel construction Safety lock for secure clamping 1,000 N clamping force Horizontal-foot mounting, 90° lever Reliable clamping that keeps processes steady The clamp provides a defined clamping force of 1,000 N and a holding force of 1,200 N, ensuring stable fixation during assembly and light machining operations. These figures describe the mechanical capacity to resist workpiece movement and accidental release; the integrated safety lock prevents unintentional opening, increasing process reliability. The spindle uses an M6x40 thread to adapt to common jig fixtures, enabling straightforward replacement or adjustment where required. Built for endurance and low-maintenance use Constructed from stainless steel, the component resists corrosion and stands up to workshop wear without frequent servicing. Its low mass (approximately 0.225 kg) and compact form factor make it suitable for constrained fixtures and portable jigs while still delivering consistent performance. The robust material choice reduces downtime associated with corrosion or fatigue, supporting longer service intervals and predictable tool life. Quick installation and efficient handling on the bench The horizontal-foot mounting ensures a stable base for bolts or dowel-mounted fixture plates and the 90° lever movement provides rapid engagement and release, speeding cycle time at repetitive stations. The lever-style design allows rapid manual operation without auxiliary equipment, which simplifies integration into existing jig setups and reduces set-up time between production runs. Safe operation supports repeatable quality A clear mechanical safety lock secures the clamp in the closed position and contributes to operator safety and process consistency. The toggle-style mechanism coupled with the horizontal foot mounting is well suited to fixtures where defined clamping direction and low-profile clearance are required. For applications that demand repeatable positioning and quick manual action, this clamp balances ease of use with assured holding strength. Contact Metav Werkzeuge for tailored technical advice and reliable supply of the Kukamet S111-2-L horizontal clamp from Emmerich. Technical data Article number: S111-2-L GTIN: 8680731508895 Brand: Kukamet Core data Clamping force max: 1,000 N Holding force max: 1,200 N Weight: 0.225 kg Angle: 90° Spindle thread: M6x40 Materials & features Material: Stainless steel Mounting: Horizontal foot Safety lock: Yes ETIM: EC011973 ECLASS: 21041719 FAQ What clamping capacity does this clamp provide? The horizontal clamp 111 offers a clamping force of 1,000 N and a holding force of 1,200 N, suitable for light industrial fixtures and assembly jigs. Is the clamp resistant to corrosion for workshop environments? Yes, the clamp is made from stainless steel, which provides corrosion resistance appropriate for typical workshop conditions and reduces maintenance needs. How is the clamp mounted to a fixture? Mounting is via a horizontal foot, allowing bolt or dowel fixation to jig plates; the spindle uses an M6x40 thread for secure attachment. Does the clamp include a safety mechanism to prevent accidental release? The product features an integrated safety lock that secures the lever in the clamped position for added safety and process reliability. Which brand and SKU identify this clamp? This clamp is supplied by Kukamet, SKU S111-2-L, and is intended as a lever-style horizontal clamp for light-duty workholding. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Safety Lock, 1,000 N Thrust, 1,200 N Holding Force, Blackened - Kukamet
Combine the compact lever design with a 1,000 N closing force and an integrated safety locking mechanism for secure, repeatable clamping in production and jigs; order the unit via Metav Werkzeuge or contact our consultants for technical advice. Horizontal lever clamp 112 – Horizontal clamp with safety latch and 1,000 N closing force (Kukamet) A Horizontal lever clamp 112 designed for fast, secure workpiece fixation in fixtures and assembly stations 1,000 N closing force 1,200 N holding force Safety locking mechanism Vertical foot mounting, 90° lever Consistent clamping performance that speeds setup The lever mechanism delivers a reliable 1,000 N closing force and a 1,200 N holding capacity, translating into secure fixation of small to medium workpieces in repeat production. This consistent force profile reduces rework and shortens setup times, because clamping results are reproducible across cycles. The compact, low-mass construction keeps inertia low while the M6×40 pressure spindle allows straightforward fine adjustment of contact pressure. For applications in jigs and fixtures, these characteristics improve throughput and process stability without adding complexity to the workholding arrangement. Secure operation and compact mounting for confined spaces Safety and installation flexibility are combined in a compact package: the clamp features an integrated safety latch that prevents accidental release under vibration or incidental contact, and a vertical foot mounting that suits upright panel or plate assemblies. The 90° lever orientation offers a low-profile solution where radial clearance is limited. A black-oxide finish provides corrosion resistance and a subdued appearance for industrial environments. At only 0.225 kg, the unit integrates easily into designed fixtures without imposing significant load on moving assemblies or modular tooling plates. Practical advantages for workshops and production lines This lever clamp is suited to machining jigs, assembly fixtures and general workshop applications where repeatable clamping and fast handling matter. The mechanism is designed for straightforward installation and maintenance, helping to reduce downtime between jobs. For maintenance teams and production engineers, the combination of a compact lever, safety locking and adjustable pressure spindle means fewer specialised parts and faster reconfiguration of workholding setups. The clamp delivers measurable operational benefits: shorter cycle times, improved process repeatability and a robust, industrial-grade finish. Choose the Kukamet clamp for dependable clamping performance — contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com to request technical details or a quotation for SKU B112-2-L Technical data SKU: B112-2-L GTIN: 8680731507218 Model: 112 Category: Spanner / Horizontal clamp Facts Closing force: 1,000 N Holding force: 1,200 N Weight: 0.225 kg Angle: 90° Pressure spindle: M6×40 Special features Safety locking mechanism Vertical foot mounting Black-oxide finish Compact lever clamp design FAQ What maximum clamping and holding forces does this clamp provide? The clamp provides a closing force of 1,000 N and a holding force of 1,200 N, suitable for secure fixation in jigs and assembly fixtures with moderate loads. Is the clamp suitable for vertical mounting on fixture plates? Yes. The unit is supplied with a vertical foot for upright mounting, and the 90° lever profile is designed for compact installation on fixture plates. How is the clamping pressure adjusted? Adjustment is achieved via the M6×40 pressure spindle, allowing precise setting of contact pressure to match the workpiece and process requirements. Does the clamp include a safety feature to prevent accidental release? A built-in safety locking mechanism secures the lever in the clamped position to avoid unintended opening under vibration or incidental contact. Which finish and weight can be expected for integration in modular tooling? The clamp has a black-oxide finish and weighs approximately 0.225 kg, making it easy to integrate into modular fixtures without significant additional mass. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Safety Lock, 1,000 N Thrust, Zinc-Plated - Kukamet
Take advantage of a compact lever clamp that combines reliable 1,000 N clamping force, a safety lock for secure operation and a corrosion-resistant galvanised finish for long service life. Order the Kukamet horizontal clamp directly via Metav Werkzeuge or consult the team for application advice and configuration. 112 Horizontal clamp by Kukamet — 90° lever clamp, galvanised The 112 is a horizontal lever clamp designed for secure 90° fixturing in jigs and fixtures, fixed via a vertical foot and equipped with a safety locking mechanism 90° lever clamp with safety lock Galvanised finish for corrosion resistance Clamping force up to 1,000 N Vertical foot for secure fixture mounting Consistent, measurable clamping for reduced rework The horizontal clamp delivers a clear performance profile: 1,000 N clamping force and 1,200 N holding force, specified to keep components stable during machining or assembly. Measurable force values translate into repeatable setup quality, so fixtures remain precise across repeated cycles and the number of quality checks is reduced. The defined 90° orientation ensures predictable seating against stops and edges, helping to maintain alignment without guesswork. Built for workshop durability and safe handling A galvanised finish protects the clamp against workshop humidity and common contaminants, extending service intervals and lowering replacement frequency. The integrated safety lock prevents unintentional release under load, which improves operational safety during handling and transfer. Weighing just 0.225 kg, the unit is easy to position and replace in modular setups, combining durability with a light, manageable form factor. Straightforward mounting and clear mechanical interface Mounting is designed for quick integration: a vertical foot provides a stable base for fixture plates and benches, while the pressure spindle is specified as M6x40, matching standard threaded inserts and captive bushes. The lever action simplifies clamping and unclamping, speeding cycle times and easing manual operations. The compact profile of the clamp supports tight layouts and keeps obstruction to a minimum, enabling denser fixture designs without compromising access. Contact Metav Werkzeuge in Emmerich to specify the Kukamet 112 horizontal clamp for secure 90° fixturing and to request a tailored quotation Technical Data SKU: 112-2-L GTIN: 8680731500479 Brand: Kukamet Weight: 0.225 kg Measurements & force data Clamping force: 1,000 N Holding force: 1,200 N Angle: 90° Pressure spindle: M6x40 Materials & special features Galvanised material Vertical foot mounting Safety lock Lever clamp type FAQ What maximum clamping force does the clamp provide? The Kukamet 112 horizontal clamp specifies a clamping force of 1,000 N and a holding force of 1,200 N for defined fixture performance. Is the clamp suitable for use in humid workshop environments? Yes, the galvanised finish on the horizontal clamp offers improved resistance to corrosion commonly found in workshop atmospheres. How is the clamp mounted to a fixture plate? The clamp is designed for mounting via a vertical foot, compatible with standard fixture plates and bench integrations. Does the clamp include a lock to prevent accidental release? The unit is fitted with a safety lock, preventing unintentional unclamping while under load. What spindle specification does the clamp use? The pressure spindle is specified as M6x40, matching widely used threaded inserts and enabling straightforward replacement if required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Safety Lock, 1,750 N Thrust / 2,600 N Holding Force, Zinc-Plated - Kukamet
Take advantage of the combination of compact design, dependable locking and clear technical performance to secure fixtures with confidence. The clamp’s galvanised construction and safety lock reduce downtime and maintenance in daily shop use. Order the clamp directly via Metav Werkzeuge or consult the team for specification advice. Horizontal clamp 142-L by Kukamet — 90° base with safety lock The Horizontal clamp 142-L is a toggle-style horizontal clamp with a 90° mounting foot, engineered for reliable workholding and repetitive fixture tasks in industrial and workshop environments. 90° horizontal base for fixed workholding Galvanised finish for corrosion resistance Robust solid arm construction Safety locking for secure clamping Consistent, measurable clamping performance for production use The clamp delivers clearly specified forces: a maximum clamping force of 1750 N and a holding force of 2600 N, values that support predictable fixture behaviour during machining cycles. The compact unit, weighing 0.39 kg, minimises added mass on jigs while maintaining repeatable pressure. Specified forces enable planning for load-bearing requirements and reduce the need for trial-and-error adjustments; where force figures are a factor, the numeric data provide an objective basis for selecting the correct workholding element. Secure operation through mechanical design and safety locking A solid, reinforced arm construction provides rigidity under load, improving part alignment and repeatability. The integrated safety lock prevents unintentional release during handling and vibration, which enhances operator safety and process reliability. The galvanised surface treatment reduces corrosion risk in workshop atmospheres, extending service life and preserving functional tolerance. Together, these features offer a practical balance between durability and safe daily operation. Easy integration and low-maintenance handling on fixtures The horizontal foot mounting at a fixed 90° angle simplifies installation on benches and jigs designed for horizontal toggle clamps, allowing fast retrofitting of existing tooling. The mechanical toggle principle gives tactile feedback and a positive locked state without complex servicing; maintenance is limited to periodic inspection and lubrication as required. This low-maintenance characteristic supports continuous use in production lines and reduces total cost of ownership through long service intervals. Contact Metav Werkzeuge for specific mounting recommendations, compatibility checks and to arrange procurement of the Kukamet 142-L horizontal clamp directly from Emmerich. Technical Data Article number: 142-4-L GTIN: 8682843520192 Manufacturer: Kukamet Facts Weight: 0.39 kg Maximum clamping force: 1750 N Maximum holding force: 2600 N Angle: 90° eClass: 21041719 ETIM: EC011973 Special features Horizontal mounting foot Galvanised material Massive/solid arm Safety locking mechanism SKU: 142-4-L FAQ Is the clamp suitable for repeated production cycles? The Kukamet horizontal clamp 142-L is designed for repetitive fixture work and specified with maximum clamping and holding forces to support continuous cycles. How is the clamp mounted? Mounting is via a horizontal foot at a fixed 90° angle; the supplied SKU identifies the required footprint for jigs and benches. What maintenance does the clamp require? Routine inspection and light lubrication are recommended; the galvanised finish reduces corrosion and maintenance frequency for the 142-L clamp. Does the clamp include a locking feature to prevent accidental opening? Yes, the unit incorporates a mechanical safety lock to secure the toggle in the closed position and prevent unintended release. What are the key numeric specifications to consider when replacing an existing clamp? Refer to weight (0.39 kg), maximum clamping force (1750 N), maximum holding force (2600 N) and the 90° mounting angle when comparing items. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Safety Lock, 1000 N Thrust / 1200 N Holding Force, Blackened - Kukamet
Secure, compact and engineered for repeatable workholding: the combination of a right-angled mounting foot, a safety locking mechanism and a 1,000 N closing force ensures dependable clamping performance in assembly and light machining. Order the Horizontal clamp 113 directly via Metav Werkzeuge or ask our consultants if needed. Kukamet Horizontal clamp 113 — right-angled mounting foot, safety lock A robust Horizontal clamp 113 designed for secure workholding in assembly and machining tasks where compact installation and reliable locking are required. Right-angled mounting foot Safety locking mechanism Closing force 1,000 N Holding force 1,200 N Dependable clamping with measurable performance The clamp delivers a closing force of 1,000 N and a holding force of 1,200 N, providing quantifiable security for fixtures and jigs. These values translate into stable retention during handling, machining and assembly operations where components must not shift. The built-in safety locking prevents accidental release during loading and reduces the risk of workpiece movement, supporting consistent cycle times and fewer rejects. Specified forces allow planners to match the device to application requirements and to compare alternatives on an objective basis. Compact mounting that saves space and simplifies integration A right-angled mounting foot and a fixed 90° geometry enable low-profile installation on fixtures and plates where clearance is limited. The clamp’s M6 x 40 pressure spindle provides a standardised interface for adjustment and attachment, allowing straightforward replacement or modification of the clamping pad. With a mass of 0.27 kg, the unit adds negligible weight to assemblies, making it suitable for modular tooling systems and portable rigs where balance and manoeuvrability matter. Robust finish and user-oriented design for workshop use The component is supplied with a blackened finish, which offers corrosion resistance and a discreet appearance in production environments. The toggle-style mechanism is engineered for quick engagement and repeatable positioning, enabling efficient cycle operation without complex adjustment. Construction materials and surface treatment are selected to withstand normal workshop wear while preserving the functional properties of the locking device and spindle thread. Practical applications and installation notes Designed as a compact lever clamp, this device suits fixtures, assembly tables and small machining jigs that require a reliable, lockable hold at a right angle. The standard spindle thread simplifies retrofit into existing clamping arrays. Where higher retaining forces are necessary, multiple clamps can be arranged in sequence to distribute load. For integration, ensure the mounting surface accommodates the right-angled foot and that the M6 thread depth matches the specified spindle length. Choose the Kukamet horizontal clamp 113 for secure, space-saving clamping with proven locking safety — contact Metav Werkzeuge for supply and technical advice. Technical data SKU: B113-2-L GTIN: 8680731507430 Category: Clamp Closing force: 1,000 N Holding force: 1,200 N Angle: 90° Weight: 0.27 kg Pressure spindle: M6 x 40 Mounting type: right-angled foot Finish: blackened Safety locking mechanism: yes Brand: Kukamet FAQ How much clamping force does the device provide? The clamp offers a closing force of 1,000 N and a holding force of 1,200 N for secure retention in typical assembly and light machining tasks. Is the clamp equipped with a locking function? Yes. The Horizontal clamp 113 includes a safety locking mechanism that prevents unintended release once the toggle is engaged. What mounting interface is required for installation? A right-angled mounting foot is used; the pressure spindle thread is M6 x 40 for adjustment and fixing to the mounting plate. What is the finished surface and durability of the clamp? The unit has a blackened finish that provides corrosion resistance and a durable exterior suitable for workshop environments. What are the product identifiers for ordering and inventory? Reference SKU B113-2-L and GTIN 8680731507430 when ordering or checking stock. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Safety Lock, 2.3 kN Closing Force, Stainless Steel - Kukamet
Take advantage of the combination of stainless steel durability, a 2,500 N holding force and an integrated safety lock for dependable, repeatable clamping in production environments; order the clamp directly via Metav Werkzeuge or ask our consultants for tailored advice. Horizontal toggle clamp 112 (S112-3-L) by Kukamet — stainless steel, safety lock Horizontal toggle clamp 112 offers robust workpiece retention for fixtures and jigs, optimised for vertical-foot mounting in production and assembly applications. Stainless steel construction for corrosion resistance Vertical-foot mounting for bench or fixture installation M8x50 pressure spindle for secure contact adjustment Integrated safety lock for accidental release prevention Consistent clamping for reliable production The clamp delivers a 2,300 N clamping force with a 2,500 N holding capacity, providing repeatable retention that reduces rework and inspection time. Its toggle mechanism converts short handle travel into high contact force, ensuring secure fixation with minimal operator effort. For engineers and workshop managers, the compact footprint and defined 90° operating angle mean predictable positioning on fixtures and jigs, facilitating faster cycle setup and consistent process outcomes. Built to last with practical safety features Manufactured from stainless steel, this lever clamp resists corrosion in workshop and light industrial environments, extending service life and reducing maintenance intervals. The model includes an integrated safety lock, which prevents unintended opening under vibration or when handling assemblies. This combination of material choice and mechanical safeguard supports safer workstations and contributes to lower downtime through fewer clamp-related incidents. Simple mounting and precise adjustment The clamp is supplied for vertical-foot mounting, allowing secure attachment to benches or fixture plates; the defined 90° angle of action is suitable for common holding geometries. Fine adjustment is achieved via the M8x50 pressure spindle, permitting exact contact pressure and compensation for part tolerances. These features simplify integration into existing fixtures and enable quick adjustments during process optimisation without specialised tools. Why this clamp suits professional workshops This toggle clamp blends compact design with measurable performance: low weight and small dimensions allow dense placement on multi-clamp fixtures while maintaining high holding capacity. The robust mechanism and stainless construction make it appropriate for production lines, assembly stations and custom jigs where reliability and repeatability are required. Metav’s role as a precision partner ensures access to compatible accessories and replacement parts through a single, dependable supplier. Contact Metav Werkzeuge for a technical consultation or to request batch availability of the Kukamet Horizontal toggle clamp 112 (S112-3-L); our specialists in Emmerich will advise on fixture integration and delivery options Technical data Article number: S112-3-L GTIN: 8680731508987 Manufacturer: Kukamet Facts Weight: 0.34 kg Clamping force: 2,300 N Holding force: 2,500 N Operating angle: 90° Special features Material: stainless steel Mounting: vertical foot Pressure spindle: M8x50 Safety lock: yes Category: spanner eClass: 21041719 ETIM: EC011973 FAQ What holding and clamping forces does this clamp provide? The Kukamet horizontal toggle clamp 112 (SKU S112-3-L) specifies a holding force of 2,500 N and a clamping force of 2,300 N, suitable for light to medium production fixturing. Is the clamp suitable for use in humid or corrosive workshops? Yes, the clamp’s stainless steel construction makes the model well suited to environments where corrosion resistance is beneficial. How is the clamp mounted and what is the operating angle? This model is designed for vertical-foot mounting and operates at a fixed 90° angle, simplifying installation on benches and fixture plates. Does the clamp include a safety mechanism to prevent accidental release? Yes, the horizontal toggle clamp 112 is equipped with an integrated safety lock to prevent unintended opening under vibration or during handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Safety Lock, 3.5 kN Clamping Force, Zinc-Plated - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines reliable holding strength with a built-in safety lock for uninterrupted fixture work; order directly via Metav Werkzeuge or consult their specialists for application advice. 111 Horizontal Clamp by Kukamet — Galvanised lever clamp with 3.5 kN force The 111 Horizontal Clamp is a horizontal lever clamp designed for secure clamping in workshop fixtures and production jigs, featuring a fixed 90° engagement and a safety locking mechanism. Galvanised steel construction Integrated safety locking mechanism Max clamping force 3,500 N Dependable clamping power for repetitive production The clamp delivers a consistent 3,500 N maximum clamping force with a 3,650 N holding capacity, providing stable fixation for machining, assembly and inspection tasks. The specified forces mean fewer repositions and reduced rework, so cycle times remain predictable. The threaded pressure spindle is M10x70, which defines the contact travel and makes force transmission straightforward to calculate for fixture design. For applications where positioning tolerance and repeatability matter, the compact lever mechanism ensures rapid engagement and a secure mechanical hold. Designed for easy integration and safe operation A horizontal foot mounting simplifies attachment to plates and fixture bases, enabling the clamp to be installed flush with jig surfaces. The integrated safety lock prevents accidental release during vibration or part handling, improving operator safety and process reliability. The galvanised finish gives increased corrosion resistance, extending service life in less-than-ideal workshop environments and reducing the need for frequent replacements. At just 0.81 kg the unit is light enough to handle during assembly yet robust in operation, making it suitable for both manual jigs and automated stations where compact, repeatable clamps are required. Practical engineering that cuts maintenance and keeps setups efficient The lever clamp’s simple mechanical layout minimises moving parts and eases routine checks. The right-angle engagement at 90° suits standard clamping orientations and helps maintain consistent part geometry under load. Because the design focuses on mechanical resilience and a positive locking function, downtime for adjustments is reduced and fixtures remain stable over many cycles. The combination of galvanised material and a straightforward pressure spindle makes spare-part planning and replacement predictable, supporting continuous production runs. Contact Metav Werkzeuge for tailored mounting advice and to request the Kukamet 111 horizontal clamp (SKU 111-4-L) for your fixtures — expert guidance and fast supply from Metav Werkzeuge ensures a reliable addition to any workshop Technical data SKU: 111-4-L GTIN: 8680731500295 ECLASS: 21041719 ETIM: EC011973 Facts Max clamping force: 3,500 N Holding force: 3,650 N Pressure spindle: M10x70 Angle: 90° Weight: 0.81 kg Special features Material: Galvanised Mounting: horizontal foot Safety locking: yes Type: Horizontal lever clamp Storytrigger: lever clamp FAQ What clamping force can be expected from this clamp? The Kukamet 111 horizontal clamp provides a maximum clamping force of 3,500 N and a holding force of 3,650 N, suitable for many light to medium fixture applications. Is the clamp suitable for harsh shop environments? Yes, the galvanised construction gives the clamp enhanced corrosion resistance, making the Kukamet 111 appropriate for workshop conditions where moisture or contaminants are present. How is the clamp mounted to a fixture plate? The unit uses a horizontal foot mounting arrangement, allowing secure attachment to flat fixture bases while keeping the clamping lever accessible at right angles. Does the clamp include a safety feature to prevent accidental release? The lever clamp is equipped with an integrated safety lock to prevent unintended opening during vibration or part handling, enhancing operational safety. What spindle specification is used for pressure adjustment? The pressure spindle is specified as M10x70, which determines the available contact travel and helps when calculating clamp placement in a jig. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Safety Lock, 3.5 kN Closing Force, Black Oxide Finish - Kukamet
Take advantage of a sturdy 90° mounting foot, a safety lock for secure holds and a compact weight that simplifies jig design — together these features support consistent, efficient clamping in production environments. Order the Horizontal clamp 113 directly via Metav Werkzeuge or consult our advisors for tailored recommendations. Horizontal clamp 113 — Horizontal toggle clamp with 3,650 N holding force by Kukamet The Horizontal clamp 113 is a compact horizontal toggle clamp designed for secure 90° fixtures and quick, repeatable clamping in jigs, fixtures and workshop tools. Robust 90° angle mounting foot Safety lock for secure clamping M10×70 pressure spindle included Stable clamping where repeatability matters The clamp delivers a 3,650 N holding force, providing reliable retention for fixtures and components during machining, assembly or testing. The specified 3,500 N clamping force refers to the active pressure generated by the spindle travel and toggle geometry; this ensures components remain stationary under typical production loads. The mechanical toggle action converts handle movement into a high, consistent clamp force, which reduces the need for repetitive adjustments and supports process stability. The solid toggle design is suited to industrial use where repeatable positioning is required. Quick mounting and safe operation for busy workspaces Fitted with an M10×70 pressure spindle, the device permits fine adjustment of clamping pressure to match different part geometries, while the integrated safety lock prevents accidental release during handling or vibration. The angle foot mounting type (Winkelfuß) enables a fixed 90° orientation, simplifying installation on plates and frames. The combination of rapid toggle actuation and the lockable mechanism increases throughput while maintaining operator safety and process integrity. Compact, resilient finish for long service life Finished in a blackened finish, the clamp resists surface corrosion and blends into workshop fixtures without causing marking on workpieces. With a net mass of 0.94 kg, the unit is lightweight enough for fixture integration yet robust enough to withstand frequent cycles. The compact dimensions and simple attachment method make it suitable for batch production tooling, manual workstations and automated fixtures where space and reliable performance are priorities. For complex applications or specification checks, technical advice is available via the Metav contact channels. For reliable clamping from Kukamet and fast supply from our European quality hub, contact Metav Werkzeuge in Emmerich for purchase guidance and delivery options. Technical data SKU: B113-4-L GTIN: 8680731507539 Manufacturer: Kukamet Material: blackened finish Weight: 0.94 kg Facts Clamping force max: 3,500 N Holding force max: 3,650 N Angle: 90° Pressure spindle: M10×70 Fastening type: angle foot Special features Safety lock Horizontal toggle design Category: clamp FAQ What is the maximum holding force of this clamp? The horizontal toggle clamp 113 from Kukamet provides a maximum holding force of 3,650 N. Does the clamp include an adjustable spindle? Yes, the unit is supplied with an M10×70 pressure spindle for adjustable clamping pressure. How is the clamp mounted? Mounting is via an angle foot for fixed 90° installation on plates and frames. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Safety Lock, 4.5 kN Thrust, 5 kN Holding Force, Black Oxide Finish - Kukamet
Take advantage of the combination of reliable safety locking, a compact 90° mounting foot, and a robust holding force of up to 5,000 N to keep fixtures secure and production flowing. Order the Kukamet horizontal clamp directly via Metav Werkzeuge or consult the Metav team for application advice. Horizontal clamp 113 by Kukamet — 90° angle mounting, safety lock Horizontal clamp 113 is a lever-style hold-down designed for right-angle clamping tasks in jigs and fixtures across workshop and light industrial environments Safety lock for secure clamping 90° angle foot for right-angle clamping Up to 5,000 N holding force Black-blued finish resists wear Reliable right-angle clamping that stays put The 90° angle foot provides a stable, repeatable mounting surface for right-angle fixtures, reducing setup time and scrap. Built with a proven lever clamp concept, this horizontal hold-down delivers a high holding force without requiring excessive operator effort. The distinction between clamping and holding values is important: while a closing or actuation force controls the movement, the specified 5,000 N holding capability indicates how much load the clamp resists once engaged, which helps ensure consistent component positioning during machining or assembly. Secure operation with fast, repeatable action A mechanical safety lock prevents unintended release during vibration or sudden load changes, improving workplace safety and process reliability. The thread spindle is sized M12×80, which allows straightforward integration into standard tooling plates and fixture components; the spindle spec relates to adjustability and the maximum engagement range. The lever-style actuation simplifies repetitive clamping cycles, supporting fast changeovers and maintaining clamping quality over many cycles — a practical benefit for busy production benches and assembly stations. Durable finish and compact handling for tight spaces Finished in black-blued steel, the clamp resists surface wear and presents a professional appearance while helping to limit corrosion in less aggressive environments. With a compact footprint and a mass of approximately 1.84 kg, the device combines robust performance with easy handling and minimal space consumption in fixtures. The organised combination of reliable locking, compact design and measurable holding capability makes this lever clamp a straightforward choice for precision fixturing where consistent results are required. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Horizontal clamp 113 into existing jigs and fixtures or request application recommendations from Metav Werkzeuge’s specialists today Technical data SKU: B113-5-L GTIN: 8680731507584 ECLASS: 21041719 ETIM: EC011973 Facts Max clamping force: 4,500 N Max holding force: 5,000 N Weight: 1.84 kg Angle: 90° Thread spindle: M12×80 Special features Design: Horizontal clamp / lever clamp Mounting: Angle foot Safety locking: Yes Finish: Black-blued FAQ What materials is this clamp suitable for? The Kukamet Horizontal clamp 113 is a mechanical hold-down intended for general fixture use; material suitability depends on the workpiece and setup rather than the clamp itself — the unit’s 5,000 N holding capacity supports a wide range of workshop tasks. How does the safety lock work on the horizontal clamp? The safety locking mechanism on the Kukamet Horizontal clamp 113 secures the lever in the engaged position to prevent accidental opening under vibration or impact, ensuring stable clamping during machining or assembly. Can the clamp be mounted on standard tooling plates? Yes. The clamp’s M12×80 thread spindle and 90° angle foot are designed for straightforward mounting on standard plates and fixture components commonly used in jigs and benches. Is the finish corrosion-resistant for workshop environments? The black-blued finish offers surface protection against wear and mild corrosion, making the clamp suitable for typical workshop conditions where aggressive chemical exposure is not present. What is the difference between the clamping force and the holding force? Clamping force refers to the actuation capacity (here: 4,500 N), while holding force (here: 5,000 N) defines the maximum load the engaged clamp will resist without slipping — a key metric for fixture reliability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Safety Lock, 5 000 N Holding Force, Zinc Plated - Kukamet
Combine galvanised construction, a safety lock and compact vertical-foot mounting for reliable clamping with up to 5,000 N hold force. Take advantage of robust performance and straightforward integration; order the horizontal clamp directly via Metav Werkzeuge or ask our consultants for application support. Horizontal clamp 112-5-L — 90° lever clamp with safety lock, Kukamet 112-5-L is a compact horizontal lever clamp designed for fixture and jig use, offering a 90° working angle and a vertical-foot mounting for stable attachment. Galvanised steel body for durability Integrated safety lock for secure positioning Vertical-foot mounting for stable installation Hold force up to 5,000 N, compact weight Consistent, measurable clamping performance for fixtures The lever clamp delivers reproducible clamping with a hold force of 5,000 N and a maximum pressing force of 4,500 N, values that are relevant when designing fixtures for repeatable production. The spindle is specified as M12x80, enabling predictable thread engagement and simple replacement when required. These measurable properties mean the device can be planned into clamping schemes with confidence, reducing setup time and improving throughput in short production runs or testing jigs. Space-saving installation that secures workpieces precisely Designed with a vertical foot, the unit occupies minimal bench or fixture surface while maintaining lateral stability at a 90° actuation angle. The compact mass of 1.52 kg and the lever geometry make the component suitable for modular fixtures where space and clearances are limited. The integrated safety lock prevents unintended release during handling or vibration, supporting safe operation in dynamic workshop environments and protecting both the workpiece and operators' peace of mind. Corrosion-resistant finish and service-friendly design The galvanised finish provides basic corrosion protection for workshop conditions, while the lever mechanism is accessible for inspection and lubrication, extending service intervals. The combination of durable surface treatment and conservative mechanical design reduces the likelihood of premature wear, making the clamp a pragmatic choice for maintenance-friendly jigs. Where quick part changes or repetitive clamping cycles are required, the robust construction helps maintain process stability over time. Suitable applications and integration notes This horizontal clamping device is suited to small- to medium-sized fixtures, assembly jigs and test benches where a secure, repeatable clamp is required without significant installation effort. The compact form factor and defined thread specification simplify retrofitting into existing setups, and the lever clamp characteristic supports fast manual actuation in batch operations. For automated or higher-cycle environments, compatibility with fixture top plates and indexing tooling should be verified against the stated mechanical data. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 112-5-L horizontal clamp into existing fixtures and to secure reliable supply from our Emmerich warehouse Technical Data SKU: 112-5-L GTIN: 8680731500714 Manufacturer: Kukamet Model designation: 112 eClass: 21041719 ETIM: EC011973 Facts Weight: 1.52 kg Hold force (max): 5,000 N Pressing force (max): 4,500 N Working angle: 90° Spindle/thread: M12x80 Special features Material: Galvanised Mounting: Vertical foot Safety lock: Yes Type: Lever clamp (horizontal clamp) Category: Spanner FAQ What is the maximum holding force of this clamp? The Kukamet 112-5-L horizontal clamp provides a hold force of 5,000 N and a maximum pressing force of 4,500 N, suitable for a wide range of fixture tasks. Is the clamp suitable for workshop use with occasional moisture exposure? The device has a galvanised finish that offers basic corrosion resistance for standard workshop environments; for aggressive or outdoor conditions further surface protection is recommended. How is the clamp mounted to a fixture plate? The unit uses a vertical-foot mounting arrangement allowing secure attachment to a fixture base or plate; the specified spindle thread is M12x80 for the clamping spindle. Does the clamp include any locking mechanism? Yes, the product is equipped with an integrated safety lock to prevent accidental opening under vibration or handling. Can the clamp be used in automated cells? The lever-style actuation is primarily designed for manual operation; integration into automated systems requires evaluation of actuation method and cycle requirements for the specific cell. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Safety Lock, 850 N Closing Force, 1,000 N Holding Force, Black Oxide Finish - Kukamet
Take advantage of a compact, high-performance clamping solution that combines 850 N clamping force, a safety latch and a sturdy horizontal base for repeatable fixturing. Order directly via Metav Werkzeuge or consult the Metav team for configuration advice. Horizontal clamp 111 — Kukamet horizontal lever clamp with safety latch A Horizontal clamp 111 is a robust horizontal lever clamp designed for secure, repeatable holding in machining, assembly and general workshop fixturing applications. Horizontal base for stable mounting Safety latch for secure clamping Clamping force up to 850 N Compact, lightweight design 0.125 kg Consistent clamping force for reliable production flow The clamp delivers a documented clamping force of 850 N and a maximum holding force of 1,000 N, ensuring consistent part retention under machining loads. These figures provide a transparent basis for fixture planning: the numerical values enable straightforward calculation of required clamp spacing and number for a given workpiece. The mechanically simple lever action converts manual input into predictable output, reducing cycle-time variability and helping to maintain process stability on the shop floor. Quick installation and secure operation reduce downtime Fitted with a horizontal base, the unit mounts flush to fixture plates for fast installation and minimal interference with tooling. The integrated safety latch prevents accidental release during setup or vibration-prone operations, improving operator safety and minimising rework. The pressure spindle specification M5x35 offers a standardised adjustment point for setting clamping height; this makes fine-tuning quick and repeatable, which supports efficient changeovers and shorter preparation times. Space-saving design that supports flexible layouts With a slender profile and a weight of 0.125 kg, the clamp occupies minimal fixture real estate while delivering robust performance. The compact form factor is advantageous where multiple clamps must be arranged in close proximity. The blackened finish offers basic surface protection and a non-reflective appearance that suits production environments where glare or cosmetic marking must be avoided. Low-complexity maintenance and long service life The lever mechanism and simple construction mean maintenance can be performed quickly, without specialised tools. The lack of electronic components reduces points of failure and helps to ensure long-term availability of the fixture. Where durability and repeatability are priorities, the combination of mechanical simplicity and standardised interfaces supports predictable life-cycle costs and easy replacement planning. For secure, repeatable fixturing with the Kukamet horizontal clamp 111, contact Metav Werkzeuge for tailored advice and order support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B111-1-L GTIN: 8680731506945 eClass: 21041719 ETIM: EC011973 Core specifications Clamping force (max): 850 N Holding force (max): 1,000 N Angle: 90° Weight: 0.125 kg Special features Mounting: horizontal base Pressure spindle: M5x35 Safety latch Finish: blackened FAQ What clamping and holding forces does this clamp provide? The clamp offers a clamping force of 850 N and a maximum holding force of 1,000 N, which allows straightforward fixture load planning for the Horizontal clamp 111. How is the clamp mounted to a fixture plate? Mounting is via a horizontal base, designed for flush attachment to fixture plates and compatible with common workshop layouts. Is there an anti-release feature for safety during machining? Yes, the unit includes a safety latch to prevent unintended opening during setup and machine vibration. What adjustment options are available for clamping height? Adjustment is provided by an M5x35 pressure spindle, enabling fine, repeatable setting of the clamp height. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Safety Lock, 850 N Closing Force, 1,000 N Holding Force, Blackened - Kukamet
Take advantage of the compact design, high clamping force and integrated safety lock to maintain consistent, safe production processes. Combine dependable holding power with simple fixture integration for efficient operation and low maintenance. Order the horizontal clamp directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 113 — 90° angled foot with safety lock (Kukamet) The Horizontal clamp 113 is a compact 90° horizontal toggle clamp designed for secure workpiece retention in fixtures and jigs, suitable for repetitive assembly and light machining tasks. Safety lock prevents accidental release Max clamping force 850 N Holding force up to 1000 N Angled foot for 90° mounting Consistent clamping to speed up repetitive work A compact, mechanically robust toggle clamp delivers reliable cycle-to-cycle performance, ensuring repeatable part positioning. The combination of clamping force (850 N) and holding force (1,000 N) provides stable retention during assembly and light machining, reducing rework and scrap. The integrated safety lock prevents unintended opening during handling, lowering the risk of lost cycles and enhancing operator confidence in jigs and fixtures. Easy integration into fixtures and space-saving design The angled foot mounting and compact footprint make the clamp simple to fit into existing fixtures or new bespoke tooling. The unit is finished in a black blued finish for basic corrosion resistance and a professional appearance, while the M5x35 pressure spindle enables fine adjustment of contact pressure. With a low mass of 0.155 kg, the clamp minimises additional load on moving assemblies and supports precise, lightweight fixture layouts. The SKU B113-1-L identifies the exact model for straightforward procurement and inventory control. Safety and uptime focused engineering Mechanical simplicity reduces the number of wear parts and makes maintenance straightforward, contributing to longer service intervals and predictable uptime. The safety lock is a decisive feature for applications where inadvertent release must be prevented, and the angled base keeps clamping forces aligned at 90° for stable workholding. Built to perform in production environments, this clamp supports safer workplaces and fewer interruptions, helping to maintain throughput and product quality. Choose the Kukamet horizontal clamp 113 for dependable 90° clamping — contact Metav Werkzeuge for order placement or technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B113-1-L GTIN: 8680731507386 Manufacturer: Kukamet eClass: 21041719 ETIM: EC011973 Facts Max clamping force: 850 N Holding force max: 1,000 N Weight: 0.155 kg Angle: 90° Special features Material: black blued finish Mounting: angled foot Pressure spindle: M5x35 Safety locking mechanism included Type: lever/ toggle clamp FAQ What is the maximum clamping force of this clamp? The clamp provides a maximum clamping force of 850 N and a holding force of up to 1,000 N for secure retention. Is the clamp suitable for 90° fixture applications? Yes, the angled foot and 90° configuration make it suitable for use in right-angle fixtures and jigs. What adjustment options are available for setting contact pressure? The unit uses an M5x35 pressure spindle for fine adjustment of contact pressure in the clamping point. Does the clamp include a safety feature to prevent accidental release? A mechanical safety lock is integrated to prevent unintended opening during handling and operation. Which model should be ordered for exact replacement or stock identification? Order reference SKU B113-1-L for the Kukamet horizontal clamp 113 to ensure the correct model is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Safety Lock, 850 N Thrust, Zinc Plated, M5x35 Spindle - Kukamet
Take advantage of the combination of reliable safety locking, galvanised durability and compact, light-weight construction for consistent fixture clamping. Order the 111 Horizontal clamp directly via Metav Werkzeuge or ask our consultants if needed. 111 Horizontal clamp — galvanised lever clamp with safety lock (Kukamet) A 111 Horizontal clamp for dependable horizontal workholding in jigs and fixtures, offering galvanised protection and a positive safety locking mechanism Robust galvanised finish for corrosion resistance Positive safety lock for accidental release prevention Horizontal foot for secure fixture mounting Compact lever clamp with 90° clamping angle Consistent clamping that keeps production moving The 111 Horizontal clamp is engineered for repeatable, measurable clamping: holding force 1000 N and a clamping force of 850 N deliver stable fixation for medium-duty operations. The compact design, weighing just 0.125 kg, reduces added mass on fixtures while retaining rigidity, helping maintain cycle times and machining accuracy. The integrated M5x35 spindle allows precise spindle engagement and simple replacement with standard M5 components. These objective figures provide a transparent basis for selecting the right clamp for assembly, welding or inspection fixtures where repeatability is required. Safety-first operation for busy workstations A clearly defined safety lock prevents unintended opening during handling or vibrations, reducing the risk of damaged parts and interrupted processes. The positive locking mechanism is particularly valuable in automated or semi-automated set-ups where a reliable mechanical latch removes dependence on secondary fastening. The galvanised surface finish contributes to long-term wear resistance and reduces maintenance intervals, translating into fewer stoppages and predictable service life for production workflows. Easy integration and durable workshop performance Designed with a horizontal foot mount and a 90° clamping angle, this lever clamp adapts to common fixture geometries and tight spaces. The galvanised material resists corrosion in standard workshop environments, while the low mass supports quick manual handling and reduced inertia on moving jigs. The lever-style actuation provides tactile feedback and a secure feel when locked, simplifying operator routines during batch changeovers. Overall, the clamp combines straightforward mechanical function with robustness suited to daily industrial use. Discuss application details with Metav Werkzeuge to specify the Kukamet 111 Horizontal clamp for the intended fixture and process — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 111-1-L GTIN: 8680731500042 EClass: 21041719 ETIM: EC011973 Brand: Kukamet Facts Holding force: 1000 N Clamping force (max): 850 N Angle: 90° Weight: 0.125 kg Spindle thread / press spindle: M5x35 Special features Material: galvanised Mounting: horizontal foot Safety locking included Lever clamp design Compact, lightweight construction FAQ What clamping and holding forces does this clamp provide? The 111 Horizontal clamp offers a clamping force of 850 N and a holding force of 1000 N, delivering predictable fixation for medium-duty production tasks. Is the clamp suitable for corrosive or humid environments? Yes, the galvanised finish on the Kukamet clamp provides enhanced corrosion resistance for typical workshop and assembly environments, extending functional life. How is the clamp mounted to a fixture? Mounting is via a horizontal foot; the clamp’s 90° clamping angle and compact base make it straightforward to position on jigs and fixture plates. What is the weight and how does that affect fixture design? The clamp weighs 0.125 kg, keeping added mass low and simplifying handling and dynamic behaviour of moving fixtures. Does the clamp include a safety mechanism to prevent accidental release? Yes, the clamp features a positive safety locking mechanism that secures the lever in the closed position and reduces the chance of unintended opening Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com