Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
90° Horizontal Clamp With Safety Lock, Horizontal Foot, 1,000 N Thrust / 1,200 N Holding, Zinc-Plated - Kukamet
Compact zinc-plated horizontal clamp delivering reliable holding with a 1,000 N clamping force and an integrated safety lock for safe, repeatable workholding. Order the Horizontal clamp 111 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 111 — Kukamet horizontal clamp with safety lock and zinc plating A Horizontal clamp 111 designed for secure, compact workholding in fixtures and workshop jigs, offering a 90° lever action and straightforward mounting on a horizontal foot. Zinc-plated corrosion protection Integrated safety lock for secure hold 1,000 N maximum clamping force Horizontal foot for 90° compact mounting Secure clamping that supports production efficiency The compact lever design delivers a consistent 1,000 N clamping force while the horizontal foot keeps the profile low for tight fixture layouts. This balance of force and form makes the clamp ideal for repetitive assembly or machining tasks where exact positioning and repeatability matter. The M6x40 pressure spindle ensures secure contact with the workpiece and simple fine adjustment, reducing setup time and increasing throughput without sacrificing stability. Safe and reliable operation for everyday workshop use Built with an integrated safety lock, the clamp prevents accidental release during handling and machining, enhancing operator safety and part protection. The holding force of 1,200 N provides a margin that keeps workpieces secure when vibrations or secondary operations occur. Designed for routine use, the mechanism requires minimal maintenance and delivers dependable performance across many cycles, supporting continuous production and predictable process control. Corrosion resistance and practical mounting for long service life Finished in zinc-plated steel, the clamp resists surface corrosion in typical workshop environments and maintains functional reliability over time. The 90° lever action combined with the horizontal foot mounting offers space-saving installation in modular fixtures or dedicated jigs. The unit’s compact weight of 0.225 kg aids in lightweight fixture design and simplifies integration into existing tooling without compromising rigidity. For a secure, compact workholding solution from Kukamet, contact Metav Werkzeuge in Emmerich for tailored advice and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 111-2-L GTIN: 8680731500127 Brand: Kukamet Figures Clamping force, max: 1,000 N Holding force, max: 1,200 N Weight: 0.225 kg Angle: 90° Pressure spindle: M6x40 eClass: 21041719 ETIM: EC011973 Material & special features Zinc-plated finish Horizontal foot mounting Safety locking mechanism 90° lever action Compact lever clamp design FAQ What is the maximum clamping force of the clamp? The clamp provides a maximum clamping force of 1,000 N, with a holding force rating up to 1,200 N for secure fixture retention. Which mounting method is required for installation? The unit mounts on a horizontal foot, suitable for 90° installation in modular fixtures and jigs; the low profile supports compact layouts. What spindle specification is used for pressure adjustment? The clamp uses an M6x40 pressure spindle, allowing fine adjustment of contact pressure and straightforward replacement if required. Is the surface finish suitable for workshop environments? Yes, the zinc-plated finish provides corrosion resistance for standard workshop conditions and prolongs functional life. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Safety Lock, M12x80 Spindle, 4.5 kN Thrust, 5 kN Hold Force, Blackened - Kukamet
Take advantage of reliable right-angle clamping with robust holding and clamping forces, plus a secure locking mechanism for production-grade repeatability. Order the clamp directly via Metav Werkzeuge or consult our specialists for specification matching and fast supply. Horizontal clamp 112 — 90° lever clamp with safety lock (Kukamet) The Horizontal clamp 112 is a 90° lever clamp designed for secure vertical-foot mounting in production and workshop fixturing, offering strong holding capacity for repeatable, right-angle clamping tasks. 90° lever action for right-angle clamping Safety lock for accidental-release prevention Holding force up to 5,000 N M12x80 pressure spindle for adjustable contact Reliable right-angle clamping with measurable performance This lever clamp delivers quantifiable clamping results: a maximum clamping force of 4,500 N and a holding force of 5,000 N, specified for consistent fixture stability. Such figures ensure components remain fixed during machining, assembly or inspection, reducing rework and downtime. The 90° orientation provides a compact footprint in jigs and tooling fixtures, while the mechanical lever mechanism converts manual input into repeatable clamping action. For production environments where cycle consistency matters, these values translate directly into fewer incidents of slippage and improved process yield. Long service life through robust materials and spindle design Constructed with a black oxide finish that resists wear and suppresses glare in busy workshops, the clamp combines a durable surface with a substantive build that weighs 1.52 kg. The M12x80 pressure spindle permits precise contact pressure adjustment and wear compensation without complex tools. These features minimise maintenance intervals and keep the fixture ready for repetitive cycles. The compact mass and design also help stabilise mounted workpieces without overloading supporting structures. Secure operation and straightforward safety integration A dedicated safety lock prevents unintended opening under load, enhancing operator safety and process security. The lever-style actuation provides tactile feedback and fast clamping/unclamping during set-up changes, supporting quick part changes in small-series production or jigs. Mounted via a vertical-foot arrangement, the clamp fits into many standard fixture patterns and can be positioned for clearance or accessibility as required. The mechanical lock and lever combination reduces reliance on secondary locking devices and simplifies procedure documentation for quality control. Easy integration into workshop fixtures and low-maintenance upkeep Designed for use in fixturing and bench-mounted applications, the clamp accommodates common fixture arrangements while delivering stable right-angle force. Its modest weight and clear mounting interface enable quick retrofitting to existing tooling plates. Routine upkeep is limited to checking spindle adjustment and the locking latch for wear; no special fluids or electronics are required, which lowers total cost of ownership in the long term. Specification clarity and straightforward mechanics support predictable procurement and easier spare-part planning. Contact Metav Werkzeuge for a tailored quotation or technical consultation on the Kukamet horizontal clamp 112 (SKU B112-5-L) to ensure the right clamping solution for production requirements Technical data Article number: B112-5-L GTIN: 8680731507362 Manufacturer: Kukamet eClass: 21041719 ETIM: EC011973 Key figures Weight: 1.52 kg Clamping force (max): 4,500 N Holding force (max): 5,000 N Angle: 90° Pressure spindle: M12x80 Materials & special features Black oxide finish Vertical-foot mounting Safety lock included Lever clamp design Category: Spanner FAQ What are the maximum clamping and holding forces of this clamp? The clamp provides a maximum clamping force of 4,500 N and a holding force up to 5,000 N, specified for the Kukamet horizontal clamp 112. How is the clamp mounted in a fixture? Mounting is by a vertical-foot arrangement that suits standard fixture plates and bench installations; the design allows straightforward positioning in jigs. Is there an adjustable contact element for wear compensation? Yes, the M12x80 pressure spindle enables fine adjustment of contact pressure and straightforward compensation for wear. Does the clamp include a mechanism to prevent accidental release? A mechanical safety lock is integrated to prevent unintended opening under load and to improve operational safety. Is the surface treated to resist workshop wear and corrosion? The device features a black oxide finish that offers wear resistance and reduced surface reflection suitable for workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Safety Lock, M8x50 Spindle, 2.3 kN Pressure, Zinc Plated - Kukamet
Reliable clamping and a compact design ensure efficient fixture work. Benefit from galvanised corrosion resistance and a secure safety lock, with up to 2,300 N clamping force for repeatable results. Order the (111 horizontal toggle clamp) directly via (Metav Werkzeuge) or ask our consultants if needed. 111 Horizontal toggle clamp by Kukamet — galvanised, safety lock, 90° A robust 111 horizontal toggle clamp designed for secure workpiece holding in jigs and fixtures, offering a 90° clamping angle and a horizontal-foot mounting for easy integration. Galvanised steel construction Safety lock for secure holding Clamping force up to 2,300 N Compact weight 0.34 kg Consistent clamping for repeatable production results The clamp delivers a clearly defined clamping force of 2,300 N and a holding force of 2,500 N, values that translate into stable fixation during machining, assembly and light welding operations. These figures describe two different aspects: the clamping force is the active pressure applied by the lever mechanism, while the holding force indicates the maximum resistance to unintended release. With such forces, the device secures components reliably in repetitive processes, reducing rework and improving throughput. The toggle action provides quick engagement and disengagement, shortening set‑up times in batch production. Durable construction that reduces maintenance and wear Constructed from galvanised steel, the toggle clamp offers improved resistance against corrosion in workshop environments where humidity or cutting fluids are present. The compact mass of 0.34 kg makes the unit lightweight for fixture design without compromising strength. An adjustable spindle, specified as M8x50, allows fine tuning of clamping height and pressure, enabling consistent contact with varying workpiece thicknesses. The built‑in safety lock prevents accidental opening under vibration or load, safeguarding both the component and the operator and contributing to a safer, more predictable production process. Fast integration into fixtures and clear operational benefits The horizontal‑foot mounting and a 90° clamping angle simplify incorporation into standard jigs and bespoke fixtures. The lever‑style toggle is engineered for rapid action, making it suitable for assembly lines and manual workstations where cycle time matters. For identification and ordering reference, the model is listed as SKU 111-3-L. For teams configuring workholding solutions, the compact footprint and standardised spindle thread reduce the need for custom parts and make retrofitting straightforward. Explanations such as “toggle clamp” denote a lever mechanism that locks in position, providing both immediate mechanical advantage and predictable release behaviour for operators. For reliable fixture clamping with Kukamet quality, contact Metav Werkzeuge for application advice and delivery options — info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: 111-3-L GTIN: 8680731500202 Manufacturer: Kukamet Facts Clamping force max: 2,300 N Holding force max: 2,500 N Weight: 0.34 kg Angle: 90° Spindle: M8x50 eClass: 21041719 ETIM: EC011973 Special features Galvanised steel Horizontal foot mounting Safety locking mechanism included Toggle lever clamp type Arm: not applicable FAQ How is the clamp fixed to a fixture? The 111 horizontal toggle clamp (Kukamet) is mounted via a horizontal foot and secured with standard fasteners; the spindle is M8x50 for height adjustment. What clamping capacity can be expected in daily use? Rated clamping force is 2,300 N and holding force 2,500 N, which ensures stable fixation for common workshop tasks when the clamp is correctly installed. Does the clamp resist corrosion in humid environments? Yes, the clamp’s galvanised finish provides enhanced resistance to corrosion compared with untreated steel, making it suitable for workshop and industrial settings. Is the safety lock suitable for vibration-prone applications? The integrated safety lock prevents unintentional release under vibration or impact, improving operational safety and component retention. Can the clamp accommodate different workpiece heights? Adjustment is achieved via the M8x50 spindle, allowing fine tuning of clamping height for varying material thicknesses. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Safety Lock, Stainless Steel, 850 N Thrust/1,000 N Hold - Kukamet
Take advantage of a compact, corrosion‑resistant toggle clamp that combines a stainless steel body, a secure safety lock, and reliable clamping performance for consistent fixture results. Order the clamp directly via Metav Werkzeuge or ask the consultants for specification support. Horizontal toggle clamp S112-1-L (Kukamet) — 850 N clamping force, stainless steel The Horizontal toggle clamp S112-1-L is a 90° lever clamp designed for secure workholding in jigs, fixtures and assembly stations where compact, repeatable clamping is required Compact 90° lever action clamp Stainless steel for corrosion resistance Safety lock prevents accidental release M5x35 pressure spindle for fine adjustment Consistent force for secure, repeatable clamping The clamp delivers a rated clamping force of 850 N with a maximum holding force of 1,000 N, providing measurable and repeatable restraint for medium‑duty workholding tasks. Those numeric values indicate the nominal force applied during engagement and the maximum retention capability once the clamp is closed; this distinction assists in choosing the correct device for machining, assembly or inspection fixtures. The stainless construction ensures dimensional stability under frequent use and resists corrosion in humid or coolant‑exposed environments, supporting uninterrupted production cycles. Integrated safety features that reduce incidents and downtime An integrated safety lock prevents unintended opening of the toggle during handling or vibration, reducing the risk of workpiece displacement and operator incidents. The mechanical lock engages when the lever is closed, maintaining clamp position until deliberately released; this is particularly useful in transfer jigs and automated stations where accidental actuation would cause rejects or stoppages. The provision for a fine adjustment via the M5x35 pressure spindle allows accurate contact pressure setting without compromising the lock function. Compact mounting and easy integration into fixtures The clamp mounts on a vertical base, requiring minimal footprint while offering a firm anchor point for perpendicular lever action at a 90° angle. At only 0.125 kg the component adds negligible mass to moving subassemblies and is straightforward to position in modular fixture plates. For customers new to clamping terminology: clamping force refers to the active force applied by the lever, while holding force denotes the static retention when locked. The compact geometry and standard spindle thread support quick retrofitting into existing tooling layouts. Supply reliability and practical support from Metav Werkzeuge Supplied by Kukamet and distributed via Metav Werkzeuge, the clamp benefits from established European logistics and after‑sales expertise. Metav’s offering is backed by broad product availability and a service mindset aimed at reducing supplier complexity: a single-source approach that helps maintain consistent quality across workshop inventories. For procurement and engineers this means predictable delivery and the option to request further technical details or compatible complementary components from the Metav team. For straightforward specification and rapid supply of the Kukamet S112-1-L horizontal toggle clamp, contact Metav Werkzeuge for clarifications or to arrange delivery: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: S112-1-L GTIN: 8680731508949 Manufacturer: Kukamet Facts Clamping force max: 850 N Holding force max: 1,000 N Angle: 90° Weight: 0.125 kg Pressure spindle: M5x35 Special features Material: stainless steel Mounting: vertical base Safety lock: integrated Function: lever/toggle clamp eClass: 21041719 ETIM: EC011973 FAQ What maximum force can be expected from this clamp? The Kukamet S112-1-L horizontal toggle clamp provides a rated clamping force of 850 N and a maximum holding force of 1,000 N. Is the clamp suitable for humid or coolant‑exposed environments? Yes, the stainless steel construction of the S112-1-L offers corrosion resistance suitable for humid or light coolant environments in workshops and production lines. How is the clamp mounted in a fixture? Mounting is via a vertical base; the clamp is designed for integration into plates and jigs where a perpendicular lever action at 90° is required. Does the clamp include an adjustment for contact pressure? Yes, the clamp uses an M5x35 pressure spindle for fine adjustment of contact pressure before locking. What safety provisions does the clamp offer? The S112-1-L features an integrated safety lock that prevents accidental release once the lever is closed. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Safety Lock, Vertical Base, 2.3 kN Thrust / 2.5 kN Hold, Black Oxide - Kukamet
Take advantage of the combination of compact 90° lever geometry, a robust safety lock and clamping forces up to 2,500 N for dependable, repeatable fixturing – order directly via Metav Werkzeuge or ask the consultants for further details. Kukamet 112 horizontal clamp — 90° lever clamp with safety lock The 112 horizontal clamp is a compact 90° lever clamp designed for secure, repeatable workholding in jigs and fixtures across light- to medium-duty production environments. Compact 90° lever clamp with vertical foot Clamping force up to 2,300 N Holding force rated to 2,500 N Black blued finish with safety lock Secure and repeatable clamping in a small footprint The lever-style fixture offers a space-saving 90° arrangement that suits tight layouts and modular tooling plates. With a holding force of 2,500 N and a maximum clamping force of 2,300 N, the design delivers consistent force transmission for reliable part retention. The compact mass (approx. 0.34 kg) and short pressure spindle allow quick actuation while maintaining stable contact. The compact lever clamp is particularly well suited to small jigs where access and repeatability are critical. Built-in safety and durable surface treatment A mechanical safety lock prevents accidental release under vibration or during handling, increasing operator confidence and process security. The component is finished in a black blued finish, which provides basic corrosion resistance and a uniform appearance for workshop environments. The combination of a mechanical lock and robust surface gives a balance of operational safety and low-maintenance longevity for routine production use. Practical mounting and straightforward integration The vertical foot mounting enables rigid attachment to tooling plates or fixture blocks while preserving the 90° lever orientation for ergonomic operation. The pressure spindle M8 x 50 mm permits simple adaptation to a range of workpiece profiles and clamping heights without extensive modification. The unit’s straightforward geometry supports fast retrofitting into existing fixtures and reduces setup time for repeat runs. Contact Metav Werkzeuge today for tailored technical advice on the Kukamet 112 horizontal clamp — supplied from our Emmerich warehouse; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B112-3-L GTIN: 8680731507263 ECLASS: 21041719 ETIM: EC011973 Facts Clamping force (max): 2,300 N Holding force (max): 2,500 N Weight: 0.34 kg Angle: 90° Pressure spindle: M8 x 50 mm Special features Material / finish: black blued finish Safety lock: yes Mounting type: vertical foot Category: Spanner Arm: not applicable Application trigger: lever clamp FAQ What clamping and holding forces can be expected from this clamp? The Kukamet 112 horizontal clamp provides a maximum clamping force of 2,300 N and a holding force rated to 2,500 N, offering stable retention for light- to medium-duty fixturing. How is the clamp mounted to a fixture plate? Mounting uses a vertical foot arrangement that secures the unit to tooling plates or blocks; the pressure spindle specified as M8 x 50 mm enables height adjustment and simple integration. Does the clamp include a safety mechanism to prevent accidental opening? Yes, the Kukamet 112 lever clamp features a mechanical safety lock that prevents unintended release during vibration or handling. Which surface treatment and material properties are provided? The clamp is supplied with a black blued finish, delivering basic corrosion resistance and a uniform workshop-grade appearance suitable for general production use. Is the clamp suitable for retrofitting into existing jigs and fixtures? The compact 90° lever geometry, low weight and standard M8 x 50 mm spindle make the 112 well suited to straightforward retrofitting into existing fixture designs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Safety Lock, Vertical Base, 2.3 kN Thrust, Zinc Plated - Kukamet
The combination of a galvanised finish, a 2500 N holding force and a compact vertical-foot mounting provides robust, space-saving clamping for repetitive tasks; order the clamp directly via Metav Werkzeuge or consult the team for application advice. 112 Horizontal toggle clamp — galvanised, safety lock (Kukamet) The 112 is a horizontal toggle clamp designed for secure workholding in fixtures and jigs, offering a compact, lockable solution for production and assembly applications. Galvanised corrosion resistance 2500 N holding force Safety locking mechanism Vertical-foot mounting (90°) Consistent clamping performance for serial work The 112 horizontal toggle clamp delivers reliable, repeatable clamping through a specified holding force of 2500 N and a maximum clamping force of 2300 N, values that translate directly into secure part fixation during machining, assembly or testing cycles. The numeric force ratings support process planning and risk reduction: build fixtures with predictable load limits and reduce part movement under torque or vibration. The integrated M8x50 spindle permits fine height adjustment, enabling correct contact pressure without extra shimming or complex set-up. Compact layout that simplifies fixture design A compact profile and vertical-foot mounting at a 90° angle allow the clamp to be mounted close to the workpiece, saving bench or fixture space and enabling denser tooling arrangements. The low weight (0.34 kg) contributes to easier handling during jig installation and reduces the load on moving subassemblies. These design traits support lean layouts in production environments where every millimetre of clearance matters and where multiple clamps are used in series. Durable finish for harsh workshop environments Constructed with a galvanised coating, the clamp provides elevated corrosion protection compared with plain steel, extending service life in humid or chemically aggressive workshops. The surface treatment reduces maintenance intervals and keeps contact surfaces in a predictable condition, which in turn supports longer tool life and fewer unscheduled interventions. Using treated components where appropriate reduces total cost of ownership and contributes to more stable process outputs over time. Safe operation and straightforward integration A built-in safety lock prevents unintended release during operation, improving operator safety and protecting delicate parts from sudden movement. The clamp’s toggle mechanism is designed for rapid manual actuation, so it integrates well with hand-operated assembly stations and semi-automatic fixtures. Clear mechanical limits and the locking feature assist compliance with internal safety procedures and reduce the risk of accidental unclamping during handling. For secure, compact and lockable clamping solutions, contact Metav Werkzeuge for ordering and application support – email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss how the Kukamet 112 can be integrated into existing fixtures Technical data Article number: 112-3-L GTIN: 8680731500554 SKU: 112-3-L Core specifications Holding force (max): 2500 N Clamping/pressing force (max): 2300 N Angle: 90° Spindle thread/length: M8x50 Weight: 0.34 kg Materials & features Galvanised finish Vertical-foot mounting (senkrechter Fuß) Safety locking mechanism (Mit Sicherheitsverriegelung) Category: Spanner ECLASS: 21041719 ETIM: EC011973 Catalog page (pdf): https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/texts/7d/da/15/63/6315da7d2a493df37ed56f1b/111-112-113-l-katalogseite.pdf FAQ What holding and clamping forces can be expected from this clamp? The Kukamet 112 horizontal toggle clamp provides a holding force up to 2500 N and a clamping force up to 2300 N, figures intended for fixture design and process planning. Is the clamp suitable for use in humid or corrosive workshop environments? Yes, the galvanised finish on the Kukamet 112 improves corrosion resistance and is recommended where enhanced surface protection is required. How is the clamp mounted to a fixture or base plate? The clamp uses a vertical-foot mounting at a 90° orientation, enabling direct attachment to plates or panels and allowing compact fixture layouts. Does the clamp include anti-release functionality? A built-in safety locking mechanism prevents unintended opening; the lock is integrated into the toggle for secure operation during handling and processing. Which spindle specification is supplied for adjustment? Adjustment is provided via an M8x50 spindle, allowing precise contact-height setting without additional spacers. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Solid 60mm Arm, 1,000 N Push / 1,200 N Hold, Blackened - Kukamet
Take advantage of a massive 60 mm holding arm, a blackened finish for corrosion resistance and up to 1,200 N holding force to secure workpieces reliably; order the clamp directly via Metav Werkzeuge or contact the consultants for application guidance. Horizontal clamp 113 — 60 mm arm, 1,200 N holding force Horizontal clamp 113 is a robust toggle-style horizontal clamp designed for repeatable workholding in general workshop and light industrial applications, mounted via an angle base for a fixed 90° orientation Robust 60 mm holding arm Up to 1,200 N holding force 1,000 N maximum clamping force Angle-base mounting at 90° Precision and holding performance for reliable setups The clamp delivers consistent holding force and clamping force, enabling repeatable positioning in assembly and fixture work. The difference between the two values is relevant in practice: clamping force (1,000 N) denotes the force applied during the clamping action, while holding force (1,200 N) indicates the static retention capability after engagement. This distinction informs the selection of a suitable device when secure, vibration-resistant fixation is required. The substantial 60 mm arm increases contact area and reduces deflection under load, resulting in steadier setups and fewer reworks. Built for workshop durability and simple integration Constructed with a blackened finish, the device resists wear and surface corrosion in everyday workshop conditions while maintaining a low visual profile for toolrooms and jigs. The angle-base mounting yields a fixed 90° installation, simplifying fixture design and ensuring consistent alignment across production runs. The massive arm design reduces bending and increases longevity when used in repetitive clamping cycles. Where users are less familiar with toggle mechanics, the clamping action is straightforward: a lever mechanism converts operator motion into axial clamping pressure, producing controlled retention with minimal effort. Practical advantages in production and fixtures For jigs, small assembly stations and manual production lines, the unit provides a compact solution with measurable performance characteristics. The light weight and compact footprint allow installation in confined spaces without compromising on force: despite weighing only 0.215 kg, the component sustains significant loads thanks to its hardened construction and robust geometry. The clamp’s simple mounting and unambiguous 90° orientation make it suitable for series jigs, inspection fixtures and repeatable manual presses, helping to reduce cycle times and improve overall process stability. Contact Metav Werkzeuge in Emmerich for tailored advice on fixture design and to arrange supply of the Kukamet horizontal clamp 113; telephone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: B113-2-D-C1 GTIN: 8680731507409 Type designation: 113 Manufacturer: Kukamet Category: Spanner ECLASS: 21041719 ETIM: EC011973 Arm length: 60 mm Weight: 0.215 kg Max holding force: 1,200 N Max clamping force: 1,000 N Angle: 90° Mounting: Angle base Finish: Blackened Massive holding arm Suitable for jigs and fixture integration FAQ What is the difference between the clamping force and holding force? Clamping force refers to the force applied during the clamping stroke (1,000 N), while holding force denotes the static retention capability once engaged (1,200 N) for the Kukamet horizontal clamp 113. Can the clamp be mounted vertically instead of at 90°? The device is supplied with an angle base for a fixed 90° orientation; alternative mounting positions require custom fixture adaption and verification. Is the arm material corrosion‑resistant? The blackened finish provides surface protection against wear and mild corrosion; for aggressive environments, additional surface treatment should be considered. Is the clamp suitable for heavy industrial machining fixtures? The unit is optimised for workshop and light industrial use; for heavy machining or dynamic loads beyond the rated forces, a heavier duty solution is recommended. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Solid Holding Arm, Safety Lock, 850 N Pressure, 1,000 N Hold Force, Blackened Finish - Kukamet
Take advantage of the combination of robust clamping, straightforward horizontal mounting and a reliable safety lock for dependable jigs and fixtures; order directly via Metav Werkzeuge or consult the team for specification advice. Horizontal toggle clamp 111 — Kukamet horizontal clamp with massive holding arm and safety lock Horizontal toggle clamp 111 is a compact horizontal clamp for secure workholding in fixtures and assembly jigs across light industrial and workshop applications. Massive holding arm with safety lock Horizontal foot for secure mounting Clamping force up to 1,000 N Blackened finish for corrosion resistance Consistent, measurable clamping performance that reduces rework The 111 model delivers repeatable holding with a clamping force of 1,000 N and a maximum pressing force of 850 N, providing a predictable basis for process design and quality control. These figures translate into firm retention of workpieces during machining, assembly or inspection runs, reducing the risk of slippage and subsequent rework. The combination of a massive holding arm and a dedicated safety lock means the clamp remains engaged under vibration or nodal loads, so cycle-to-cycle variation is minimised and throughput stays consistent. Faster fixture set-up and reliable mounting for repeatable workflows Designed with a horizontal foot, this clamp integrates easily into flat fixture plates and modular tooling systems, enabling quick installation and straightforward alignment. The compact form and a weight of 0.1 kg make it suitable where low mass is required to avoid disturbing delicate jigs, while the robust construction supports frequent actuation. The blackened finish resists surface corrosion in workshop environments, which helps maintain reliable operation over time and reduces maintenance intervals—an efficiency argument that supports higher overall equipment effectiveness. Built for workshop durability and safe operation Durability is achieved through focused mechanical design rather than unnecessary complexity: a reinforced arm and positive locking mechanism deliver long service life with minimal adjustment. The 90° clamping angle provides stable downward retention in many standard applications, and the solid construction supports repetitive use in production or repair settings. The clamp’s straightforward functionality suits integration into bespoke fixtures as well as modular workholding systems, providing a low-risk way to increase fixturing reliability without extensive redesign. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 111 clamp into existing fixtures or for assistance with batch supply from Emmerich: eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: B111-1-D-L-C3 Model: 111 Category: Clamps (Spanner) Core specifications Arm length: 143 mm Holding force: 1,000 N Max pressing force: 850 N Angle: 90° Weight: 0.1 kg eClass: 21041719 ETIM: EC011973 Design & features Horizontal foot mounting Massive holding arm Safety lock Blackened finish (Schwarz brüniert) Waagerechter Fuß (horizontal foot) Category path: Spanner FAQ What is the maximum holding force of this clamp? The horizontal toggle clamp 111 (Kukamet, SKU B111-1-D-L-C3) provides a holding force of up to 1,000 N with a maximum pressing force of 850 N. Can the clamp be mounted on flat fixture plates? Yes — the clamp has a horizontal foot for secure mounting on flat plates and modular fixturing systems. Is the finish suitable for workshop environments? The 111 features a blackened finish that offers basic corrosion resistance suitable for typical workshop conditions. What applications are typical for this clamp? The clamp is intended for jigs, fixtures and light production or repair tasks where repeatable, secure holding and a 90° clamping angle are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Vertical Base, 1,000 N Thrust, Zinc-Plated, 1200 N Hold - Kukamet
Compact, galvanised lever clamp delivering dependable clamping and holding forces for light industrial jigs and fixtures; the robust M6x40 pressure spindle and vertical base enable fast integration and repeatable results. Order the Horizontal clamp 112 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 112 by Kukamet — galvanised lever clamp, 1,000 N clamping force The Horizontal clamp 112 is a compact lever clamp designed to secure workpieces in jigs, fixtures and assembly operations where a low-profile, repeatable hold is required. Galvanised steel finish 1,000 N clamping force 1,200 N holding force Vertical base for stable mounting Consistent clamping power for production tasks The horizontal lever design provides a reliable, repeatable clamping action that suits short-cycle production and workshop duties. With a rated clamping force of 1,000 N and a holding force of 1,200 N, the device reduces slippage and maintains position during machining, assembly or inspection steps. The combination of measured force values and simple mechanics supports efficient process design and reduces setup variability, helping systems run with fewer interruptions and clearer quality control. Space-saving mounting and easy integration A compact footprint and a vertical base allow the clamp to be fitted into tight fixtures and modular tooling plates without impeding access. The clamp’s orientation produces a horizontal clamping direction at a 90° angle, which is useful where lateral clearance is limited. The M6x40 pressure spindle provides a defined contact point for the workpiece; its standard thread size makes replacement or pad changes straightforward should different contact geometries be required. At just 0.225 kg, the unit keeps fixture mass low while maintaining structural stability. Corrosion-resistant finish and straightforward upkeep Finished in galvanised steel, the clamp resists surface corrosion in general workshop environments and requires minimal maintenance to preserve function. The lever mechanism is simple to inspect and service, and the absence of complex moving subassemblies reduces potential downtime. The robust yet uncomplicated construction supports long service life in routine applications and contributes to predictable tool performance over extended production runs. For reliable jigs and repeatable results, choose the Kukamet Horizontal clamp 112 — contact Metav Werkzeuge for personalised advice and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 112-2 GTIN: 8680731500400 Manufacturer: Kukamet Facts Clamping force: 1,000 N Holding force: 1,200 N Weight: 0.225 kg Angle: 90° Spindle: M6x40 ECLASS: 21041719 ETIM: EC011973 Special features Material: galvanised steel Fastening type: vertical base Design: horizontal lever clamp Arm: not applicable Special features: none FAQ What clamping and holding forces does the clamp provide? The Kukamet Horizontal clamp 112 provides a clamping force of 1,000 N and a holding force of 1,200 N, offering stable fixation for light industrial fixtures. How is the clamp mounted to a fixture? Mounting is via a vertical base suitable for fixture plates and modular tooling; the vertical foot enables a low-profile installation with horizontal clamping action. Which spindle is fitted and what does it mean for contact pads? The unit features an M6x40 pressure spindle. The standardized thread size allows the use of common contact pads or straightforward replacement when different contact geometries are needed. Is the clamp suitable for harsh environments? The galvanised finish improves resistance to surface corrosion in general workshop conditions; regular inspection and basic upkeep will maintain reliable performance. What typical applications suit this lever clamp? The clamp is intended for jigs, fixtures, assembly and short-cycle production where a compact, repeatable horizontal hold is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With Vertical Base, 850 N Thrust, 1,000 N Holding Force, Zinc Plated - Kukamet
Take advantage of the durable galvanised finish, the reliable 1,000 N holding force and the compact design for secure, repeatable clamping in fixtures. Order the clamp directly via Metav Werkzeuge or consult the specialists for integration into existing jigs. Horizontal lever clamp 112 — horizontal clamp, galvanised, 1,000 N holding force (Kukamet) The Horizontal lever clamp 112 is a compact horizontal clamp for 90° mounting, offering a galvanised finish and measured holding and clamping capacities for secure workholding in production and assembly fixtures. Galvanised steel finish for corrosion resistance Holding force 1,000 N for secure fixation Clamping pressure 850 N for reliable workholding Vertical base, 90° mounting orientation Robust workholding that keeps production moving Designed as a small but effective workholding element, the lever clamp provides a measured holding force of 1,000 N and a clamping pressure of 850 N, values that support repeatable fixation in jigs and test fixtures. These numerical indicators describe the device’s capacity to resist movement under load: holding force indicates the maximum static retention, while clamping pressure describes the downward force applied during operation. The galvanised surface treatment increases resistance to shop-floor corrosion, which reduces maintenance needs and helps maintain consistent clamping behaviour over time. This combination of defined force values and protective finish supports efficient, predictable production workflows and reduces setup variability. Compact footprint and straightforward mounting for tight layouts With a dedicated vertical base and a fixed 90° orientation, the unit is built for integration into confined fixture plates and assembly stations where space is at a premium. The lightweight construction, at approximately 0.125 kg, minimises added mass on moving fixtures and keeps centre-of-gravity effects low, which is beneficial for automated or manual positioning systems. The spindle uses an M5 x 35 thread length suitable for common fastening hardware, enabling quick mechanical attachment without custom adapters. The compact geometry and standardised fastening make the clamp a practical choice for retrofitting existing tooling or specifying consistent clamping points across a production line. Durable design and practical application in jigs and fixtures A lever-style mechanism delivers tactile, immediate clamping action that is easy to incorporate into repetitive assembly and machining operations. The galvanised treatment protects key contact areas against environmental wear, while the simple construction limits moving parts to those essential for the clamp action, improving service life. The appliance performs well where predictable, repeatable clamping is required, and its measured forces support selection decisions when matching clamps to part geometry and process forces. For buyers seeking reliable basic clamping technology, the product represents a low-complexity solution that balances endurance with ease of use; technical questions about fixture compatibility can be discussed with Metav Werkzeuge’s advisors. For reliable supply and tailored advice on integrating the Horizontal lever clamp 112 into fixtures, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to review mounting options and compatibility. Technical data Article number: 112-1 GTIN: 8680731500387 Manufacturer: Kukamet Facts Holding force: 1,000 N Clamping pressure: 850 N Weight: 0.125 kg Angle: 90° Spindle thread: M5 x 35 Special features Galvanised finish Vertical base mounting Lever clamp design Compact, lightweight construction FAQ What is the difference between holding force and clamping pressure? Holding force specifies the maximum retention capacity of the Horizontal lever clamp 112 (Kukamet), while clamping pressure describes the applied downward force during engagement; both values help to match the clamp to the required application. How is the clamp mounted to a fixture plate? The unit mounts via a vertical base designed for 90° installation; the Horizontal lever clamp 112 uses an M5 x 35 spindle thread for mechanical fastening to standard plates or brackets. Is the finish suitable for workshop environments? Yes, the galvanised finish on the clamp provides increased corrosion resistance, making the Horizontal lever clamp 112 appropriate for typical workshop conditions where moisture and contaminants are present. Can this clamp be used in automated stations? The compact, lightweight design and clear clamping values make this lever-style clamp suitable for automated fixtures, provided the specified holding and clamping forces meet the application’s dynamic requirements. What is the product identifier for ordering or stock checks? Refer to SKU 112-1 and GTIN 8680731500387 when enquiring about the Horizontal lever clamp 112 from Kukamet. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp Zinc-Plated Quick-Action Lever Clamp, 4.5 kN Thrust 5 kN Hold - Kukamet
Take advantage of the combination of robust holding capacity and corrosion-resistant galvanised construction for secure, repeatable clamping in production and assembly environments. Order the clamp directly via Metav Werkzeuge or consult our specialists for installation guidance. Kukamet Horizontal Toggle Clamp 133 — galvanised, 90° angle base The Kukamet Horizontal Toggle Clamp 133 is a horizontal lever clamp designed to lock workpieces at a fixed right angle for assembly, welding and general fixture applications Galvanised steel finish 90° angle mounting base M12x80 pressure spindle Holding force 5,000 N Reliable, measurable clamping performance for production use The unit delivers a clamping force 4,500 N and a holding force 5,000 N, providing mechanically predictable restraint for repeat operations. These rated forces mean fixtures remain stable during light to medium machining, welding and assembly tasks, reducing rework and improving cycle time. The toggle mechanism converts short lever travel into high clamp pressure, which supports quick clamping cycles and consistent part positioning in jigs and tooling. Corrosion resistance that extends service life in workshop settings A galvanised surface finish protects the clamp against moisture and workshop contaminants, so the component maintains functional integrity in humid or exposed environments. The corrosion-resistant coating reduces the need for frequent replacement and helps preserve the clamping geometry over time. Built from robust materials and finished for durability, this clamp supports a maintenance-friendly approach to fixturing where longevity and reliability matter. Compact mounting and fine adjustment for precise set-up Engineered with a right-angle angle base for secure mounting at 90°, this lever clamp integrates into fixtures with minimal modification. The M12x80 pressure spindle allows fine adjustment of the contact point to match workpiece height and compensate for wear, while the unit's low mass of 1.191 kg minimises additional load on fixtures. The compact footprint and repeatable toggle action support efficient workflow and straightforward replacement within modular clamping systems. Discuss mounting options and batch availability with Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and ordering assistance Technical Data Article number: 133-5 GTIN: 8680731504910 Material: galvanised steel Mounting: angle base Pressure spindle: M12x80 Weight: 1.191 kg Facts Clamping force max: 4,500 N Holding force max: 5,000 N Angle: 90° Weight: 1.191 kg Special features Surface: galvanised Mounting type: angle base Special feature: none Classification: eClass 21041719, ETIM EC011973 FAQ What maximum clamping and holding forces does this clamp provide? The horizontal toggle clamp offers a clamping force of 4,500 N and a holding force of 5,000 N, values that support reliable restraint in many assembly and light machining tasks. Can this clamp be mounted at a right angle to a fixture? Yes — the clamp features an integrated angle base for 90° mounting, making it suitable for fixtures that require perpendicular clamping positions. Is the contact point adjustable to accommodate different workpiece heights? Adjustment is possible via the M12x80 pressure spindle, which permits fine tuning of the contact point for precise contact pressure and wear compensation. Is the finish suitable for humid or workshop environments? The galvanised finish provides corrosion resistance for extended service life in typical workshop and production settings. What is the unit weight and how does that affect fixture design? The clamp weighs 1.191 kg; its compact mass reduces added load on modular fixtures and simplifies replacement without major rebalancing Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp, 1,000 N Clamping Force, Stainless Steel, Wafer Mount - Kukamet
The combination of stainless steel construction, a max. clamping force of 1,000 N, and a compact horizontal foot provides reliable, repeatable clamping for light assembly and fixture work; secure supply and expert advice are available from Metav Werkzeuge if further guidance is required. 111 Horizontal toggle clamp by Kukamet — stainless steel, 1,000 N clamping force The 111 horizontal toggle clamp is a compact horizontal-foot clamp designed for repeatable workpiece securing in light assembly, jigs and fixture applications. Stainless steel construction Max clamping force 1,000 N Holding force up to 1,200 N Horizontal foot with 90° locking angle Consistent clamping for repeatable production quality The robust toggle mechanism delivers a consistent clamping force, rated at 1,000 N, which converts into steady workholding and fewer positional shifts during processing. This repeatable performance reduces rework and supports predictable cycle times on assembly lines or manual fixtures. Where parts must remain stationary during measurement or secondary operations, the reliable holding capability, specified at 1,200 N, ensures that components stay in place without additional bracing. Durable materials to minimise maintenance intervals Constructed from stainless steel, the clamp is resistant to corrosion in typical workshop environments and requires less frequent replacement than untreated parts. The compact design and low mass (approx. 0.225 kg) limit inertia and wear on mounting points, while the M6x40 spindle provides an accessible clamp spindle thread for straightforward adjustment or replacement. These material choices contribute to lower total cost of ownership through reduced downtime and maintenance needs. Easy integration into fixtures and jigs The horizontal foot format with a 90° locking angle allows direct mounting on flat surfaces and simple incorporation into bespoke jigs or production fixtures. Its compact footprint and toggle-style actuation suit repetitive manual clamping as well as semi-automated stations where space is limited. The stainless construction and standard spindle thread permit standardised replacement parts and predictable assembly procedures, supporting efficient workshop workflows. For enquiries about Kukamet clamps and tailored fixture solutions, contact Metav Werkzeuge for local availability and technical advice: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: S111-2 GTIN: 8680731503937 Manufacturer: Kukamet Material: Stainless steel Weight: 0.225 kg Core data Max. clamping force: 1,000 N Max. holding force: 1,200 N Spindle: M6x40 Locking angle: 90° Special features Horizontal foot mounting Toggle clamp design No additional special features specified Compact, lightweight construction FAQ What clamping performance can be expected from this horizontal clamp? The 111 horizontal toggle clamp provides a maximum clamping force of 1,000 N and a holding force of up to 1,200 N, suitable for secure workholding in light assembly and jig applications. Is the clamp suitable for use in humid or corrosive workshop environments? Yes, the stainless steel construction of the Kukamet clamp enhances corrosion resistance and lowers the need for protective maintenance in standard workshop conditions. How is the clamp mounted and what orientation is intended? The clamp is supplied with a horizontal foot for mounting on flat surfaces and is designed for horizontal locking at a 90° angle for repeatable fixture integration. Can the spindle be adjusted or replaced if required? The clamp uses an M6x40 spindle, which allows straightforward adjustment and replacement using common workshop hardware. Which applications are typical for this type of toggle clamp? The toggle format and compact footprint make the clamp appropriate for jigs, fixtures, light assembly tasks and other situations requiring repeatable manual or semi-automated clamping. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp, 160mm Arm, 1,000N Press Force, Massive Holding Arm With Safety Lock - Kukamet
Take advantage of secure, repeatable clamping provided by a massive holding arm, safety locking mechanism and a compact angle-foot mount to streamline jig assembly and short-run production. Order the clamp directly via Metav Werkzeuge or consult Metav’s specialists for integration advice. Horizontal toggle clamp 113 — compact 160 mm lever, safety lock Horizontal toggle clamp 113 is a horizontal workholding clamp designed for secure fixture applications where consistent clamping force and space-saving mounting are required Massive holding arm with safety lock 90° angle foot mounting Holding force up to 1,200 N 160 mm lever arm length Consistent, measurable clamping for repeatable processes The clamp delivers reliable holding force with a maximum rated 1,200 N, ensuring stable fixation for repetitive operations. The robust lever-arm design and clearly defined clamping force make it suitable for short runs and jig-based production where process stability is essential. The mechanical locking feature reduces the risk of inadvertent release during handling, which supports reproducible cycle times and lowers rework rates. Space-efficient mounting with secure connection An angle foot mounting enables installation in confined fixture layouts and allows the clamp to be fastened at a 90° orientation for compact toolroom arrangements. The 160 mm lever provides sufficient reach while keeping the overall footprint small, so the component presentation on the fixture remains unobstructed. The blackened finish enhances surface durability and reduces light reflection in assembly cells, contributing to safer and neater workstations. Durability and safety designed into the tool Constructed with a massive holding arm and a positive safety locking mechanism, the device combines mechanical strength with operator protection. The blackened surface treatment offers corrosion resistance in standard workshop environments and supports long service life under regular use. Where ergonomic handling and straightforward locking are priorities, the clamp’s mechanical simplicity reduces maintenance complexity and improves uptime. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Horizontal toggle clamp 113 into fixtures and jigs — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: B113-2-D-L-C3 E-class: 21041719 ETIM: EC011973 Manufacturer: Kukamet Facts Lever arm length: 160 mm Holding force: 1,200 N Clamping force: 1,000 N Weight: 0.27 kg Clamp angle: 90° Special features Mounting: Angle foot Massive holding arm Safety locking mechanism Finish: blackened Category: Spanner FAQ What materials can this clamp be used with? The Kukamet Horizontal toggle clamp 113 is a mechanical workholding device suitable for a wide range of fixture-mounted parts; material compatibility depends on the fixture design and contact points rather than the clamp itself How is the clamp secured to a jig or base plate? Securing is achieved via the angle-foot mounting; the Horizontal toggle clamp 113 is fastened through the foot at 90° for compact installation and predictable alignment Does the clamp offer a positive lock to prevent accidental release? Yes, the clamp incorporates a safety locking mechanism that secures the lever in the clamped position, preventing unintended opening during handling Is the specified holding force guaranteed during production use? The holding force rating (1,200 N) for the Kukamet clamp is a design value; actual clamping performance depends on correct installation, fixture geometry and contact-pad condition What maintenance is recommended to ensure service life? Regular inspection of the pivot points and locking mechanism on the Kukamet clamp, occasional lubrication of moving joints and protection of the blackened finish from aggressive chemicals will support reliable service Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp, 2.3 kN Closing Force, 2.5 kN Holding Force, Blackened Steel - Kukamet
Combining a 2,500 N holding capacity with a 2,300 N clamping force and a compact 0.42 kg body, this clamp delivers secure, repeatable fixture retention while keeping set-ups light and manageable. Order the Kukamet Horizontal clamp 113 directly via Metav Werkzeuge or request application advice from our specialists. Horizontal clamp 113 — Kukamet horizontal lever clamp with 2,500 N holding force and right-angle foot The Horizontal clamp 113 is a compact right-angle lever clamp engineered for dependable workholding in jigs, fixtures and production benches where space efficiency and repeatable clamping matter Holding force up to 2,500 N Clamping force 2,300 N Right-angle foot mounting Blackened finish for surface protection Reliable clamping that improves cycle stability Designed for repetitive production tasks, this lever-style horizontal clamp provides a measurable holding force of up to 2,500 N and a clamping force of 2,300 N. Those figures translate directly into more consistent part retention and fewer rejects during machining, assembly or inspection. The compact design reduces mass in moving fixtures, helping to maintain cycle times; the relatively low unit weight also simplifies manual handling when configuring small to medium-sized jigs. Space-saving mounting for versatile fixtures Equipped with a right-angle foot, the clamp integrates cleanly into corner fixtures or machine tables without extending the clamping lever into obstructive areas. The M8x50 pressure spindle provides a standardised interface for contact elements and can be paired with existing fixture hardware, enabling rapid retrofitting. For engineers and technicians, this means shorter set-up time and straightforward incorporation into modular clamping systems, supporting efficient changeovers on the shop floor. Durable finish and user-oriented handling The component is supplied with a blackened finish, offering improved surface protection and a professional appearance that endures everyday workshop conditions. At 0.42 kg, the unit combines robustness with a compact weight, making it easy to position and align during assembly. The simple lever mechanism requires minimal maintenance; periodic inspection and light lubrication are sufficient to ensure long service life, reducing planned downtime and maintenance cost in production environments. Suitable applications and workshop benefits This horizontal lever clamp is suitable for general workholding tasks in metalworking and fabrication fixtures, assembly jigs and inspection setups. The fixed 90° clamping angle is ideal where lateral access is limited and a firm hold is required without complex mounting. Used as part of a clamping strategy, it contributes to process reliability and operator confidence: fewer re-clamps, more stable machining and consistent outcomes across production runs. For robust right-angle clamping, request the Kukamet Horizontal clamp 113 via Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com for availability and technical advice. Technical Data Article number: B113-3 GTIN: 8680731507447 Manufacturer: Kukamet Designation: Horizontal clamp 113 ETIM: EC011973 ECLASS: 21041719 Facts Holding force: 2,500 N Clamping (pressing) force: 2,300 N Weight: 0.42 kg Clamping angle: 90° Pressure spindle: M8x50 Special features Mounting type: Right-angle foot Finish: Blackened finish Category: Spanner Story trigger: lever clamp FAQ What materials is this clamp intended for in workshop fixtures? The Kukamet Horizontal clamp 113 is designed for general fixture workholding and is suitable as a mechanical clamping element in jigs and fixtures used for metalworking and assembly processes. How is the unit mounted and aligned in a fixture? Mounting is via the right-angle foot; the 90° orientation allows secure attachment at fixture corners or bases, and the M8x50 pressure spindle accepts common contact elements for alignment. What forces can be expected during operation? Rated values for the clamp are 2,300 N clamping force and 2,500 N holding capacity, giving a clear indication of the mechanical performance that can be relied upon in production settings. Does the surface finish require special care? The blackened finish offers basic surface protection; routine cleaning and occasional light lubrication of the moving parts are sufficient to maintain reliable function. Which SKU should be referenced when ordering or specifying? Refer to SKU B113-3 when specifying or ordering the Kukamet Horizontal clamp 113 to ensure the correct item is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp, 2.3 kN Closing Force, Zinc Plated, Vertical Foot Mount - Kukamet
Take advantage of a compact, galvanised lever clamp that combines reliable clamping force (2,300 N) with a high holding force (2,500 N) for consistent fixture security; order directly via Metav Werkzeuge or request advice from our consultants if clarification is needed. Horizontal clamp 112 — Kukamet, galvanised lever clamp with M8x50 spindle and 90° lock The Horizontal clamp 112 is a robust lever clamp for workshop and production fixtures, designed for repeatable horizontal clamping in jigs and assembly stations Galvanised steel construction Clamping force up to 2,300 N Holding force up to 2,500 N 90° locking angle Faster, more reliable clamping for repetitive production The galvanised lever design delivers a consistent clamping force that reduces process variability and minimises rework. With a maximum clamping force of 2,300 N and a maximum holding force of 2,500 N, this small fixture provides secure seating for parts during machining, assembly or inspection. The corrosion-resistant galvanised finish extends service life in workshop environments, lowering replacement frequency and supporting a continuous production flow. By converting clamping parameters into repeatable results, the clamp supports lean workflows and predictable cycle times. Compact mounting and clear mechanical adjustment A vertical-foot mounting arrangement enables straightforward attachment to fixturing plates and bases, keeping the clamp footprint minimal while preserving stability. The integrated M8x50 spindle provides an easily adjustable contact point, allowing fine tuning of clamp engagement without complex tools. The lever locks at a 90° angle to indicate secure engagement and to save space when the clamp is open. Because the unit weighs only 0.34 kg, it is simple to handle during fixture setup and can be positioned in tight assemblies where a larger device would not fit. Practical fit for workshops and small series production Designed as a dependable component for fixtures, the clamp suits general workshop use, jigs, and small-batch production where durable, repeatable clamping is required. The simple mechanical construction keeps maintenance straightforward and spare-part variety low, which supports predictable uptime and easy stock-keeping. Sourcing through Metav ensures reliable supply from Emmerich and benefits from an established distribution channel that puts precision within reach of workshops and trade customers. For tailored advice on integrating the galvanised Kukamet horizontal clamp into existing fixtures, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for secure supply and expert guidance Technical data Article number: 112-3 GTIN: 8680731500486 Brand: Kukamet Facts Clamping force max: 2,300 N Holding force max: 2,500 N Weight: 0.34 kg Angle: 90° Spindle: M8x50 Special features Material: galvanised Mounting: vertical foot Category: Clamp SKU: 112-3 FAQ Is the clamp suitable for use in humid workshop environments? The Horizontal clamp 112 features a galvanised finish that improves corrosion resistance, making the Kukamet clamp appropriate for typical workshop conditions where moisture is present. Can the spindle length be adjusted for different workpiece heights? Yes, the clamp’s M8x50 spindle allows mechanical adjustment of the contact point so the clamp can be set to suit varying part heights and fixture clearances. What does the 90° locking angle mean for fixture design? A 90° locking angle ensures a clear, compact locked position; the horizontal clamp 112 secures parts without encroaching on adjacent workspace when engaged. Is the clamp suitable for automated production cells? The clamp’s robust mechanical locking and repeatable forces make the Kukamet horizontal clamp 112 a practical choice for jigs and fixtures in semi-automated or manual production; full automation integration depends on the cell’s specific handling interfaces. How heavy is the unit and does that affect fixture loading? At 0.34 kg the clamp is lightweight, simplifying fixture handling and reducing additional load on tooling plates while maintaining the specified clamping and holding forces. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp, 3.5 kN Clamping Force, Safety Lock, Blackened Finish - Kukamet
Benefit from robust clamping with a 3,650 N holding force, compact mounting and an integrated safety lock for secure, repeatable setups; order the device via Metav Werkzeuge or consult our specialists for application guidance. Horizontal toggle clamp 111 — Horizontal clamp with 3,650 N holding force and safety lock (Kukamet) The Horizontal toggle clamp 111 provides secure horizontal clamping for jigs, fixtures and assembly work in workshops and light industrial environments. 3,650 N maximum holding force Integrated safety locking mechanism Horizontal base mounting for fixtures M10x70 pressure spindle, 90° clamping angle Secure, repeatable clamping that protects production flow The clamp delivers a 3,650 N holding force that ensures workpieces remain fixed during machining and assembly, reducing rework and cycle interruptions. The built-in safety lock prevents accidental release during handling and vibration, increasing process safety and operator confidence. Where repeatability matters, the mechanical locking action provides consistent positioning without electrical controls, contributing to a predictable setup time and fewer stoppages. Compact mounting and easy adjustment for fast fixture integration Designed for horizontal mounting with a horizontal base, the unit weighs 0.81 kg, allowing quick attachment to fixtures and jigs without substantial counterweighting. The M10x70 pressure spindle enables fine adjustment of clamp travel and contact pressure, so clamping force can be adapted to varying workpiece profiles. The black oxide finish offers a degree of corrosion resistance while maintaining a low-reflectivity surface suitable for workshop environments. Practical choice for workshop and light-industry fixtures This toggle clamp suits repeated clamping tasks in small-series production, assembly benches and test fixtures; its 90° clamping angle provides a compact footprint and clear access to the clamped area. The mechanical simplicity supports low-maintenance operation and straightforward replacement in modular fixtures. Technical documentation and a product image are available for verification of dimensions and mounting details prior to integration. Purchase through Metav Werkzeuge for reliable delivery and application advice — our specialists will assist with selection and mounting recommendations for the Kukamet Horizontal toggle clamp 111 (SKU B111-4-L) Technical data Article number: B111-4-L Model designation: 111 GTIN: 8680731507065 Manufacturer: Kukamet Numbers / Core technical data Max. clamping force: 3,500 N Max. holding force: 3,650 N Clamping angle: 90° Weight: 0.81 kg Pressure spindle: M10x70 Design / Special features Horizontal base mounting Safety locking mechanism Black oxide finish Toggle clamp category SKU: B111-4-L FAQ What is the maximum holding force of this clamp? The clamp provides a maximum holding force of 3,650 N, ensuring secure retention of workpieces during machining and assembly. Can the clamping pressure be adjusted? Yes, the M10x70 pressure spindle allows manual adjustment of contact height and clamping pressure to suit different workpiece thicknesses. How is the clamp mounted to a fixture? Mounting is via a horizontal base; the design is intended for secure attachment to jigs, fixtures and assembly benches. Is there a safety mechanism to prevent accidental release? An integrated safety locking mechanism secures the clamp in the closed position to prevent unintended opening under vibration or handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp, 3.5 kN Clamping Force, Zinc-Plated Wafer Base - Kukamet
Take advantage of a galvanised construction, high clamping and holding forces, and a compact design to secure repeatable fixture results. Order the clamp directly via Metav Werkzeuge or request technical advice from our consultants. 111 Horizontal toggle clamp by Kukamet — galvanised, 90° lever The 111 Horizontal toggle clamp is a horizontal-base lever clamp engineered for secure, repeatable holding in industrial fixtures and jigs. Galvanised finish for corrosion resistance 90° lever for secure horizontal clamping M10x70 pressure spindle included Compact weight 0.81 kg for easy handling Reliable clamping force for series work The lever clamp delivers a clear performance benefit for repetitive production tasks: a clamping force of 3,500 N with a holding force of 3,650 N, providing a secure grip under cyclic loads. The difference between clamping and holding force is intentional — the clamping force denotes the operational closing pressure while the holding force indicates the maximum retained load once engaged. This distinction helps planners select the right device for batch processes where repeatability and part stability are crucial, reducing rework and inspection cycles. Galvanised body for long-term workshop use A galvanised finish shields the mechanism against surface corrosion, making the clamp suitable for workshop environments where moisture and coolant residues are present. The galvanised surface reduces maintenance frequency and helps preserve the mechanical linkage over time. At a weight of 0.81 kg, the unit balances robustness with manageable handling during fixture assembly, allowing engineers to mount or reposition clamps without special lifting aids. Fast integration into fixtures and jigs Engineered with a horizontal base, a 90° lever travel and an M10x70 pressure spindle, the clamp is ready for direct mounting on bespoke fixtures or machine tables. The horizontal base simplifies alignment in production jigs and provides a low-profile clamp point, which helps maintain clear access to the workpiece. The M10x70 spindle enables straightforward adjustment of contact pressure and compensates for minor workpiece height variation, supporting quick setup and minimal tool changeover time. Choose the Kukamet 111 horizontal toggle clamp for secure, repeatable holding in production fixtures — contact Metav Werkzeuge for procurement and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 111-4 GTIN: 8680731500226 Manufacturer: Kukamet Facts Weight: 0.81 kg Clamping force: 3,500 N Holding force: 3,650 N Angle: 90° Special features Galvanised material Horizontal base Pressure spindle: M10x70 90° lever clamp design FAQ What maximum holding capacity does this clamp provide? The Kukamet 111 horizontal toggle clamp provides a holding force of 3,650 N and a clamping force of 3,500 N (SKU 111-4), suitable for secure retention in many fixture applications. Is the surface protected against corrosion? Yes, the body is galvanised, giving the clamp enhanced resistance to surface corrosion and reducing routine maintenance. How is the clamp mounted in a fixture? The unit uses a horizontal base for mounting and includes an M10x70 pressure spindle for height adjustment; this allows direct integration into bespoke jigs and machine tables. Can the spindle be adjusted to accommodate different workpiece heights? The clamp is supplied with an M10x70 pressure spindle that permits straightforward adjustment of the contact point to match workpiece variations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp, 4.5 kN Closing Force, 5 kN Holding Force, Zinc-Plated Wafer Base - Kukamet
Reliable clamping performance, a corrosion‑resistant zinc finish and a compact 1.52 kg design make this horizontal clamp a practical choice for repeatable fixturing; order the Kukamet Horizontalspanner 111 directly via Metav Werkzeuge or consult our advisors for application guidance. Horizontalspanner 111 — horizontal clamp with 4,500 N clamping force (Kukamet) Horizontalspanner 111 is a horizontal lever clamp engineered for secure, repeatable fixture in workshop and light industrial applications, combining a zinc‑plated finish with a robust M12×80 pressure spindle. 4,500 N clamping force 5,000 N holding force Zinc‑plated corrosion resistance Horizontal base for stable mounting Secure force where it matters The clamp delivers a 4,500 N clamping force and a 5,000 N holding force, providing reliable contact pressure for machining, assembly and fastening operations. The distinction between clamping and holding force is important: clamping force refers to the active downward pressure applied during closure, while holding force indicates the static retention capability once the lever is engaged. This separation ensures predictable behaviour during repetitive cycles and reduces rework caused by movement under load. Durable finish for demanding environments A zinc‑plated surface protects the mechanism against corrosion, extending service life in workshop environments where coolant splash or humidity may be present. The surface treatment keeps tolerances intact and minimises maintenance intervals, enabling steady production throughput. The compact mass of 1.52 kg keeps the clamp lightweight for fixture plates without compromising stability, allowing integration into jigs where limited payload is a consideration. Practical design for fast, repeatable clamping Designed as a horizontal lever clamp with a horizontal base for mounting, the device secures workpieces at a 90° operating angle and features an M12×80 pressure spindle for fine pressure adjustment. The lever mechanism converts manual input into repeatable holding action, shortening cycle times in batch work and ensuring consistent positioning in assembly processes. Where quick clamping and clear visual engagement are required, this design reduces operator effort while maintaining safety margins. Simple integration and clear specifications Installation requires only horizontal mounting and standard fastening; the compact footprint suits modular fixture plates and dedicated jigs. Clear, measurable specifications such as clamping/holding forces, spindle thread and overall weight support straightforward planning for fixture design and load calculations. The clamp’s robust mechanical concept means predictable performance in fixtures where reliable, repeatable retention is a priority. Contact Metav Werkzeuge today to discuss Kukamet clamps and secure local supply from Emmerich for your production fixtures Technical data SKU: 111-5 GTIN: 8680731500301 ECLASS: 21041719 ETIM: EC011973 Brand: Kukamet Model: 111 Core specifications Clamping force: 4,500 N Holding force: 5,000 N Weight: 1.52 kg Pressure spindle: M12×80 Mounting: horizontal base Operating angle: 90° Materials and features Zinc‑plated finish Type: horizontal lever clamp Mounting style: horizontal base No additional special features FAQ What load capacities can be expected from this clamp? The Kukamet Horizontalspanner 111 offers a clamping force of 4,500 N and a holding force of 5,000 N, suitable for many workshop and light industrial fixturing tasks. Is the clamp suitable for integration into modular fixture plates? Yes, the horizontal base and compact weight of 1.52 kg make the clamp compatible with modular plates and bespoke jigs where space and payload are limited. How is clamping force adjusted on this model? Adjustment is achieved via the M12×80 pressure spindle, which allows fine tuning of contact pressure for varying workpiece thicknesses. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp, 850 N Closing Force, 1,000 N Holding Force, Blackened - Kukamet
The compact design combines a horizontal foot for stable mounting with a clamping force of 850 N and a holding capacity of 1,000 N, delivering reliable fixture performance for small jigs and repeatable production tasks. Order the clamp directly via Metav Werkzeuge or contact our consultants for specification support. Horizontal clamp 111 by Kukamet — horizontal base, 850 N clamping force the Horizontal clamp 111 is a compact horizontal clamping device designed for jigs, fixtures and small-scale production applications where a secure 90° hold and quick actuation are required Compact horizontal base design Clamping force up to 850 N Holding force up to 1,000 N Black blued corrosion resistance Secure clamping with measurable force and dependable repeatability The clamp delivers a consistent clamping force of 850 N, backed by a holding force of 1,000 N, which translates into secure workholding for recurring operations. This measurable performance reduces part slippage and rework, improving throughput. The compact geometry means integration into existing fixtures is straightforward; minimal workspace is occupied while the force figures remain suitable for many metalworking and assembly tasks. The result is a balance between performance and space efficiency that supports steady production flow. Fast integration and straightforward mounting for fixtures Mounting is achieved via a horizontal foot, enabling fixed placement on jigs and fixture plates. The actuator uses an M5x35 spindle for contact pressure adjustment and a fixed 90° pivot that keeps the clamping arm aligned with the workpiece. These design elements shorten setup times and simplify repeat installations across multiple stations. For engineers specifying equipment, the compact weight of 0.125 kg aids dynamic balancing where several clamps are used in one assembly, and the defined thread size supports standard tooling for maintenance or replacement. Corrosion-resistant finish and service-friendly construction A black blued finish protects key surfaces against corrosion and provides a low-reflective surface suitable for workshop environments. The choice of finish reduces the need for frequent cosmetic maintenance while helping the clamp retain functional precision over time. The mechanism is constructed to allow basic adjustment and replacement of wear parts without complex procedures, keeping downtime low and maintenance predictable for production planners. Designed for practical workshop and light industrial use This horizontal clamping device suits a range of materials and tasks where a compact, repeatable clamp is required — from assembly benches to small machining fixtures. The robust mechanical values make it appropriate for repeatable holding in medium-duty operations and for use in modular tooling systems. The SKU B111-1 and associated identifiers support traceability in procurement and inventory processes, simplifying reordering and stock management for purchasing teams. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Horizontal clamp 111 into production fixtures — Metav Werkzeuge is available at +49 2822 7131930 or info@metav-werkzeuge.com for specification guidance and supply from Emmerich Technical data SKU: B111-1 GTIN: 8680731503753 eClass: 21041719 ETIM: EC011973 Manufacturer: Kukamet Facts Clamping force max: 850 N Holding force max: 1,000 N Angle: 90° Weight: 0.125 kg Special features Mounting: horizontal foot Spindle: M5x35 Finish: black blued Category: Spanner FAQ What clamping and holding forces does this clamp provide? The clamp offers a clamping force of 850 N and a holding capacity of 1,000 N, providing reproducible fixation for light to medium-duty tasks with the Horizontal clamp 111. Is the clamp suitable for fixture plates and jigs? Yes, the horizontal foot mounting and compact footprint make this clamp appropriate for integration into jigs, fixture plates and modular tooling systems. How is the contact pressure adjusted? Contact pressure is adjusted via the supplied M5x35 spindle; the thread size uses common tooling for simple on-site adjustment or replacement. What protection does the surface finish provide? The black blued finish provides corrosion resistance and a low-reflective surface, which helps maintain component appearance and functional durability in workshop environments. Can this clamp be used for repeated production cycles? The mechanical design and specified force ratings support repeatable production use; the clamp is intended for recurring clamping in assembly and light machining tasks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp, M8x50 Spindle, 2.3 kN Thrust, 2.5 kN Holding Force, Blackened - Kukamet
Take advantage of a compact lever clamp that combines high holding capacity, a low weight of 0.34 kg, and a robust blackened blued finish for reliable, repeatable fixturing. Order the Kukamet horizontal clamp directly via Metav Werkzeuge or consult the Metav team for application advice. 111 Horizontal Clamp by Kukamet — horizontal foot, lever-style, M8×50 spindle 111 is a compact horizontal clamp designed for secure holding in jigs and fixtures, offering defined clamping and holding forces for repeatable production processes. Up to 2,300 N clamping force 2,500 N holding force for fixtures Horizontal foot for stable mounting M8×50 pressure spindle fitted Consistent, measurable holding performance for fixtures The lever-style clamp delivers a clear mechanical advantage thanks to its specified clamping force (2300 N) and holding force (2500 N), which provide secure fixation for medium-duty machining and assembly tasks. The defined force values help to calculate fixture strength and safety margins, making planning more straightforward. The integrated M8x50 pressure spindle allows precise contact pressure adjustment, ensuring reliable repeatability for batch setups while limiting workpiece deformation. Compact mounting that speeds up set-up times Designed with a horizontal foot and a fixed 90° lever position, this clamp is tailored to fit into tight fixture layouts where space is at a premium. The lightweight construction (only 0.34 kg) reduces added mass on movable elements and simplifies handling during manual set-up. Wherever short cycle times and fast changeovers matter, the compact form factor and lever mechanism help reduce set-up time and improve workplace ergonomics. Durable finish and dependable supply chain for workshop use The blackened blued finish provides basic surface protection and a uniform appearance, reducing the need for frequent maintenance in standard workshop environments. Manufactured by Kukamet and distributed through Metav Werkzeuge, the product benefits from a European supply filter that emphasises consistent quality and availability. Metav’s experience in precision tools and broad product range supports reliable delivery and long-term availability for production and trade customers. For application-specific guidance and to order the Kukamet 111 horizontal clamp, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for existing fixtures Technical data Article number: B111-3 GTIN: 8680731503777 Brand: Kukamet SKU: B111-3 Facts Clamping force max: 2300 N Holding force max: 2500 N Weight: 0.34 kg Angle: 90° Pressure spindle: M8×50 Special features Mounting: horizontal foot Finish: blackened blued finish Style: lever clamp Arm: not applicable FAQ How is the clamp mounted in a fixture? The Kukamet 111 horizontal clamp is mounted via a horizontal foot and secures at a 90° lever position; the pressure spindle is M8×50 for direct fixture integration. What are the clamping and holding capacities? The unit provides a maximum clamping force of 2300 N and a holding force of 2500 N, values suitable for reliable medium-duty fixturing. Does the surface finish protect against corrosion? The blackened blued finish on the clamp offers basic corrosion resistance and a low-maintenance surface for standard workshop conditions. Is this clamp suitable for compact jigs and fast set-ups? Yes. The lever-style design, horizontal foot and light weight (0.34 kg) make the clamp well suited to compact jigs and applications that require quick changeovers. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp 2,000 N Push Force, 2,500 N Hold Force, Vertical Base, Zinc-Plated, Massive Holding Arm - Kukamet
Combine quick pneumatic actuation, a massive 117 mm holding arm and a galvanised body to achieve reliable, repeatable clamping in production fixtures; order the unit directly via Metav Werkzeuge or consult the team for tailored fixturing advice. Pneumatic Clamp 652 — Kukamet pneumatic lever clamp with 117 mm arm and galvanised body Pneumatic Clamp 652 is a compact pneumatic lever clamp designed for vertical-foot mounting in jigs and fixtures, delivering high holding force for repeatable production clamping. Pneumatic actuation for fast clamping Massive 117 mm holding arm Galvanised body resists corrosion Faster cycles and reproducible clamping for production lines The pneumatic drive provides consistent, repeatable motion with short cycle times, enabling higher throughput and fewer rejects. With pneumatic actuation capable of delivering up to 2,000 N of operating force and a holding force of 2,500 N, the clamp secures workpieces reliably during machining or assembly operations. The controlled pneumatic stroke reduces operator variability, so fixture repeatability improves and process stability is increased — a clear efficiency gain for batch and continuous production. Robust construction that endures workshop conditions A galvanised body and a massive holding arm provide mechanical stability and corrosion resistance for long service life in demanding environments. The 117 mm arm length gives a favourable leverage ratio for firm engagement while the vertical foot mounting ensures a compact footprint and secure attachment to tooling plates. The 90° orientation suits typical lever-clamp geometries, simplifying integration into existing fixtures and reducing design iteration time. Simple integration and predictable maintenance for uptime The clamp is engineered for straightforward installation and routine inspection: the vertical base allows quick positioning on standard tooling plates, and the solid arm minimises deformation under load. Specifying this pneumatic lever unit streamlines the assembly of clamping systems, helping to avoid complex bespoke solutions. For integration planning, the product’s SKU 652-3-D-C2 and core performance figures support rapid selection and procurement decisions, while standardised pneumatic connection practices keep maintenance predictable. Contact Metav Werkzeuge for supply and configuration of the Kukamet Pneumatic Clamp 652 (SKU 652-3-D-C2) and benefit from local stock and technical advice from Emmerich Technical data Article number: 652-3-D-C2 Manufacturer: Kukamet ECLASS: 21021004 ETIM: EC011973 Facts Arm length: 117 mm Max pneumatic force: 2,000 N Max holding force: 2,500 N Angle: 90° Special features Material: galvanised Mounting: vertical foot Massive holding arm Category: Clamps FAQ What is the maximum holding force of this clamp? The clamp offers a maximum holding force of 2,500 N, providing secure retention for typical fixturing and light machining tasks. Can the unit be mounted directly on a tooling plate? Yes — the vertical foot mounting is intended for direct attachment to standard tooling plates and fixture bases for compact integration. Is the body treated against corrosion? The construction is galvanised, offering enhanced resistance to corrosion in workshop environments. Which applications suit this pneumatic lever clamp? The device is suited to jigs, fixtures and production clamping where repeatable, pneumatic actuation and robust holding force are required. What is the exact product designation to order? Order using Pneumatic Clamp 652, Kukamet, SKU 652-3-D-C2 to ensure correct supply and configuration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp Horizontal Base Without Pneumatic Cylinder, 4,000 N Thrust / 18,000 N Hold - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines galvanised construction with clear performance figures — 4,000 N clamping force and 18,000 N holding force — for dependable fixture security in production and jigs. Order the clamp directly via Metav Werkzeuge or consult our advisors for integration recommendations. 681 Pneumatic clamp — horizontal-foot clamp, galvanised (Kukamet) The 681 pneumatic clamp is a robust industrial clamping device for 90° applications, designed for horizontal-foot mounting and supplied without a pneumatic cylinder for flexible system integration. Robust galvanised steel construction 4,000 N maximum clamping force 18,000 N maximum holding force Horizontal-foot mounting, 90° clamping angle Reliable clamping performance for demanding fixtures The clamp delivers precise and repeatable clamping results thanks to its defined 4,000 N actuation capability and substantial 18,000 N static holding capacity. These two values describe different but complementary properties: the first refers to the active pressing force applied during engagement, the second to the maximum load the device resists once closed. This separation ensures a secure hold of components under load while allowing control over the actuation dynamics. The galvanised finish contributes to long-term dimensional stability by resisting corrosion in workshop environments, supporting uninterrupted production cycles and predictable fixture behaviour. Simple integration and flexible actuation options Equipped with a horizontal foot and a fixed 90° clamping orientation, the unit is intended for straightforward mounting on fixture plates and tooling frames where transverse clamping is required. As it is supplied without pneumatic cylinder, the clamp can be paired with a customer-selected actuator or an existing pneumatic system, allowing specification of stroke, speed and cushioning to match cycle requirements. The compact design and a moderate mass of 4.6 kg permit installation in both manual jigs and semi-automated assemblies while keeping the overall fixture footprint economical and serviceable. Durability and low-maintenance design that keeps production running Constructed from galvanised steel and engineered for workshop use, the device prioritises longevity and simple upkeep. The substantial holding characteristic reduces slipping and the need for frequent repositioning, lowering process disruptions and rework. Maintenance is limited to visual inspection and lubrication at scheduled intervals; the absence of a built-in cylinder reduces the number of wear items supplied with the clamp and makes replacement or upgrade of the actuator straightforward. These qualities help achieve consistent output and reduced downtime across assembly and machining tasks. Speak with Metav Werkzeuge for a technical consultation on the Kukamet 681 pneumatic clamp and receive tailored installation guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 681-6-M GTIN: 8680731505061 Manufacturer: Kukamet Facts Weight: 4.6 kg Maximum clamping force: 4,000 N Maximum holding force: 18,000 N Clamping angle: 90° Special features Material: galvanised steel Mounting: horizontal foot Delivered without pneumatic cylinder Category: clamp / clamping device FAQ What is the difference between clamping force and holding force? Clamping force describes the active pressing capability (the 4,000 N figure for the 681 pneumatic clamp), while holding force denotes the maximum static load the closed clamp can resist (18,000 N) without slipping. Is a pneumatic cylinder included with the clamp? No, the clamp is supplied without pneumatic cylinder to allow selection of an actuator that matches cycle speed and stroke requirements. Can the clamp be mounted on a horizontal plate? Yes. The unit features a horizontal-foot mounting arrangement and a fixed 90° clamping orientation suitable for plate-mounted fixtures. What materials is the clamp made from, and how does that affect service life? The main components are galvanised steel, providing corrosion resistance that supports long service life in standard workshop atmospheres and reduces the frequency of surface maintenance. How can the clamp be integrated into an existing pneumatic system? The clamp’s actuator interface accepts an external pneumatic cylinder; selection of cylinder size and cushioning allows tuning of actuation speed, stroke and impact behaviour for the specific application and cycle. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp Horizontal Foot, No Pneumatic Cylinder, 2,500 N Clamping Force, Zinc-Plated - Kukamet
Benefit from robust 90° clamping, galvanised corrosion resistance and a compact 3.1 kg design that supports reliable fixture setups; order the 682 pneumatic clamp directly via Metav Werkzeuge or consult the specialists for integration guidance. 682 Pneumatic Clamp (lever clamp, galvanised, horizontal foot) 682 Pneumatic Clamp is a compact lever-style clamp engineered for secure 90° workholding with a horizontal foot mount and supplied without a pneumatic cylinder. Galvanised construction for corrosion resistance Horizontal foot mounting for easy bench fixing Clamping force up to 2,500 N Holding force rated at 9,000 N Consistent, measurable clamping that improves throughput The 682 delivers a defined clamping force of 2,500 N and a holding force of 9,000 N, values that convert to predictable part retention during machining or assembly. Specifying force in newtons (N) allows direct comparison with other fixtures and helps planners calculate safety factors for tooling and jigs. The compact mass of 3.1 kg keeps the fixture lightweight for repositioning, while the lever clamp mechanism provides quick actuation and visibly repeatable clamping, reducing cycle-time variability and the need for rework. Simple mounting and integration for workshop systems A horizontal foot configuration simplifies attachment to plates and benches without complex adapters, enabling rapid fixture assembly on standard tooling plates. The clamp is supplied without pneumatic cylinder, which permits selection of a cylinder to match existing pneumatic infrastructure or specific stroke requirements. The 90° clamping angle is well suited to typical right-angle locating tasks in welding, inspection and light machining setups, and the galvanised finish helps maintain appearance and function in workshop environments. Robust materials and service life for frequent use Manufactured in galvanised steel, the clamp resists surface corrosion and preserves contact geometry over extended use, supporting long-term repeatability. The lever-style design reduces component count and simplifies maintenance: worn or damaged actuator components can be identified and replaced without full fixture overhaul. For procurement and planning, the model’s compact footprint and clear force ratings make it straightforward to include in fixture lists for production cells where durable, reliable clamping is required. For tailored advice on integrating the Kukamet 682 into existing jigs or for procurement via Metav Werkzeuge, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s specialists provide application support and supply from Emmerich. Technical data Article number: 682-4-M GTIN: 8680731505085 Manufacturer: Kukamet Facts Weight: 3.1 kg Clamping force (max): 2,500 N Holding force (max): 9,000 N Clamping angle: 90° ECLASS: 21021004 ETIM: EC011973 Special features Material: galvanised steel Mounting: horizontal foot Supplied without pneumatic cylinder Lever clamp design FAQ What clamping force does this clamp provide? The 682 pneumatic clamp provides a clamping force of 2,500 N and a holding force rated at 9,000 N for secure workholding. Is a pneumatic cylinder included with the clamp? No, the clamp is supplied without a pneumatic cylinder to allow integration with an existing pneumatic system or the selection of a cylinder to match stroke and force requirements. How is the clamp mounted to a fixture plate? Mounting is via the horizontal foot, which enables straightforward bolting to bench plates or fixture bases for stable right-angle clamping. Which material finish is used and what are the benefits? The clamp is made from galvanised steel; the finish offers enhanced corrosion resistance and long-term preservation of contact geometry. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp Vertical Base Without Handle, 2 000 N Push / 2 500 N Hold, Zinc Plated - Kukamet
Reliable clamping with a 2,500 N maximum hold and 2,000 N pneumatic push force delivers secure, repeatable workholding for production processes; the compact, zinc-plated design and vertical-foot base simplify integration into fixtures. Order the Kukamet 651 pneumatic clamp directly via Metav Werkzeuge or contact our consultants for application support. Kukamet 651 Pneumatic Clamp — Vertical-foot pneumatic clamp with 90° actuation The 651 pneumatic clamp is a 90° actuation workholding device designed for stable, repetitive clamping in assembly lines, jigs and production fixtures. Pneumatic actuation, 2000 N push force Holds up to 2,500 N clamping force Vertical-foot mounting for stable setup Zinc-plated corrosion protection Secure, high-force clamping for efficient workflows Built to provide consistent repeatability, this pneumatic clamping unit converts compressed-air actuation into a reliable holding force of up to 2,500 N, with a maximum push of 2,000 N. The right-angled actuation at 90° is particularly suited to applications where the clamping movement must clear components or tooling, reducing handling steps and helping to shorten cycle times. The result is a measurable improvement in process reliability and throughput when used in repetitive production tasks. Compact design that simplifies fixture integration Weighing just 0.91 kg, the unit offers a compact footprint and a vertical-foot mounting option that eases installation on plates and tooling blocks without requiring elaborate substructures. The absence of a manual handle reflects the pneumatic-only operation, making the device suitable for automated stations or where manual clearance is needed. The zinc-plated finish provides basic corrosion resistance, helping to maintain appearance and function in standard workshop environments. Reliable operation with low upkeep for continuous use Mechanical simplicity and pneumatic actuation mean fewer wear parts and straightforward maintenance routines. The clamp delivers repeatable clamping cycles with minimal adjustment, supporting stable quality control in assembly tasks. For production environments seeking dependable workholding that integrates easily with pneumatic control systems, this clamp offers a balance of holding power, compactness, and robustness that helps reduce downtime and protect workpiece integrity. Choose Kukamet reliability for consistent workholding — contact Metav Werkzeuge for tailored advice and fast supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: 651-3 GTIN: 8680731503098 eClass: 21021004 ETIM: EC011973 Facts Weight: 0.91 kg Maximum clamping force: 2,500 N Maximum actuation (push) force: 2,000 N Angle: 90° Special features Material: zinc-plated Mounting: vertical-foot Special feature: without handle Type: pneumatic clamp FAQ What clamping and actuation forces does this clamp provide? The 651 pneumatic clamp (Kukamet, SKU 651-3) delivers a maximum clamping force of 2,500 N and a pneumatic push force up to 2,000 N for secure workholding. Is the clamp suitable for automated production lines? Yes, the pneumatic actuation and absence of a manual handle make the clamp well suited to automated stations and integration with pneumatic control systems. How is the unit mounted to a fixture or base? The device uses a vertical-foot mounting that allows direct attachment to plates or tooling blocks for a stable installation. What material protection is applied to the clamp? The clamp is zinc-plated, offering basic corrosion protection appropriate for standard workshop and production environments. Does the clamp require special maintenance? Maintenance is straightforward due to the simple pneumatic actuation; routine inspection of pneumatic connections and seals is recommended to ensure long service life. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com