Quick, secure clamping with lever clamps
Lever clamps provide rapid, repeatable workholding for fixture building, assembly, welding and testing, using the kinematic knee-lever principle to deliver self-locking retention and resist process vibrations. Designed for metalworking applications and made from high-strength materials such as zinc-plated steel or stainless steel, these clamps reduce setup and handling times while enabling high holding forces with minimal operator effort. Available in vertical and horizontal versions as well as thrust bar and closure styles, lever clamps ensure consistent positioning, long service life and enhanced process reliability for serial production. Key advantages include self-locking mechanism, high repeatability, reduced setup time and robust construction.
90° Pneumatic Clamp Vertical Base Without Handle, 3,000 N Thrust, Zinc Plated - Kukamet
Robust galvanised construction and a 3,000 N pneumatic clamping capacity provide secure, repeatable holding for confined fixtures; the compact vertical mounting foot and handle-free design simplify integration on jigs and production lines. Order the 651 pneumatic clamp directly via Metav Werkzeuge or ask our consultants if needed. 651 Pneumatic Clamp — Vertical foot, 3,000 N clamping force (Kukamet) A 651 pneumatic clamp engineered for secure, repeatable clamping in production, assembly and jig applications. Vertical mounting foot Galvanised corrosion-resistant finish 3,000 N pneumatic clamping force Without handle for compact installation Secure clamping that keeps production moving The galvanised pneumatic clamping unit combines corrosion resistance with a high clamping output to deliver reliable performance on busy production floors. With a rated clamping force of 3,000 N, the device provides consistent pressure for repeatable cycles, reducing part movement during machining or assembly. The robust finish helps protect against shop-floor contamination and humidity, extending service life and reducing the frequency of replacements, which supports uninterrupted workflows and predictable maintenance intervals. Measurable holding and safety benefits explained Rated holding capacity of 3,300 N gives a safety margin above the active clamping force; this difference ensures the fixture maintains position even under intermittent loads. Clamping force refers to the active force applied during engagement, while the holding value describes the maximum static load the clamp resists when closed. The clear numerical ratings allow straightforward integration into process calculations and risk assessments, enabling planners and engineers to match the clamp to specific applications with confidence. Compact installation for confined jigs and fixtures Designed with a vertical mounting foot and a fixed 90° actuation angle, the clamp fits tight layouts where horizontal space is limited. The handle-free configuration reduces profile height and potential interferences on multi-clamp fixtures, while a unit mass of 1.945 kg keeps the overall fixture weight low, which can simplify handling and reduce load on positioning devices. These attributes make the unit particularly suitable for automated cells, assembly jigs and presses where clearance and repeatability are critical. Practical reliability and partner support for workshop use Manufactured to be robust and straightforward in operation, the device minimises downtime through a simple, durable design. Routine maintenance is limited to periodic inspection of pneumatic connections and the clamping surface; the galvanised coating helps reduce corrosion-related wear. Combined with Metav Werkzeuge’s position as a quality filter for the European market, customers gain access to centralised procurement, product breadth and the assurance of consistent supply from a trusted partner. For ordering or technical advice on the Kukamet 651 pneumatic clamp, contact Metav Werkzeuge for expert guidance and supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 651-4 GTIN: 8680731503104 EClass: 21021004 ETIM: EC011973 Facts Clamping force: 3,000 N Holding force: 3,300 N Weight: 1.945 kg Angle: 90° Special features Material: galvanised Mounting: vertical mounting foot Handle: without handle Design: lever-type pneumatic clamp FAQ What clamping and holding forces does this clamp provide? The Kukamet 651 pneumatic clamp provides a clamping force of 3,000 N and a holding capacity of 3,300 N, specified for secure retention in production fixtures (SKU 651-4). How is the clamp mounted in a fixture? The clamp is supplied for vertical mounting via its dedicated foot; the vertical mounting foot and fixed 90° actuation are designed for compact jig and fixture integration. Is a handle included for manual actuation? No; the unit is delivered without a handle to reduce profile height and allow closer spacing in automated or multi-clamp fixtures. What surface protection does the clamp have for shop-floor use? The clamp features a galvanised finish, which improves corrosion resistance and helps extend component life in humid or contaminated environments. Which industries or applications suit this clamp best? The unit is intended for production, assembly and jig applications where repeatable pneumatic clamping is required; its compact design is ideal for automated cells and confined fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp Vertical Base Without Handle, 4,500 N Thrust 5,000 N Hold, Zinc-Plated - Kukamet
Take advantage of the combination of high holding power and corrosion-resistant construction to secure workpieces reliably in automated fixtures; order the unit directly via Metav Werkzeuge or consult our specialists for application support. Pneumatic clamp 651 — Vertical-foot clamp, 90° stroke (Kukamet) The 651 pneumatic clamp is a compact pneumatic clamping unit designed for fixture and jig applications in production and workshop environments, providing robust 90° clamping and stable vertical-foot mounting. Vertical base for secure mounting Galvanised housing resists corrosion 90° clamping angle for firm fixture Up to 5,000 N holding force Consistent clamping power for repeatable results The clamping unit delivers a clear separation between actuation and retention: a 4,500 N maximum pressing force provides fast, positive engagement while a 5,000 N maximum holding force secures the workpiece during machining. These figures describe the peak actuator pressure and the static retention capacity respectively; together they reduce vibration and positional drift, which improves repeatability across batches and shortens inspection cycles. The performance data supports process reliability and fewer reworks in medium-duty production environments. Durable construction for long service life The body is galvanised, giving a corrosion-resistant surface that withstands coolant mist and typical shop-floor conditions. With a compact mass of 3.678 kg, the unit balances solidity and ease of installation. The vertical base (vertical-foot) design simplifies integration into t-slotted plates or fixture blocks and saves lateral space on the workbench. The clamp’s 90° orientation provides a low-profile locking direction that is compatible with many standard tooling concepts and reduces interference with machining operations. Suitable for automated and manual workflows Actuated pneumatically, this clamping device eliminates the need for manual levers and is supplied without a handle, making it ideal for automatic sequences and guarded cells where human access is limited. Pneumatic actuation allows precise cycle timing and easy integration with compressed-air controls. For users less familiar with pneumatic systems: the unit converts compressed-air pressure into linear clamping motion, enabling short clamp/release times and consistent clamping force independent of operator strength. Practical benefits for workshop logistics and procurement The compact format and standard mounting arrangement make the clamp straightforward to replace or upgrade within existing fixtures, reducing downtime during maintenance. As a component from Kukamet, the unit offers industrial-grade reliability while fitting into centrally supplied tool inventories. When ordered via Metav Werkzeuge, customers benefit from consolidated sourcing and a European distribution point that supports predictable replenishment and quality filtering for the workshop supply chain. Contact Metav Werkzeuge for tailored fixture advice and availability of the Kukamet 651 pneumatic clamp (SKU 651-5), including delivery options from Emmerich and application guidance by our specialists Technical Data Article number (SKU): 651-5 GTIN: 8680731504958 Manufacturer: Kukamet Core specifications Weight: 3.678 kg Maximum pressing force: 4,500 N Maximum holding force: 5,000 N Clamping angle: 90° Materials & features Material: galvanised Mounting: vertical base Special feature: without handle Classification: eClass 21021004 ETIM: EC011973 FAQ What maximum holding force does the clamp provide? The Kukamet 651 pneumatic clamp offers a maximum holding force of 5,000 N, suitable for medium-duty fixture applications where stable retention is required. How is the clamp mounted to a fixture plate? Mounting is achieved via a vertical base; the vertical-foot design allows secure attachment to t-slots or custom fixture blocks using standard fasteners. Can the clamp be used in automated production cells? Yes. The pneumatic actuation and handle-free design make the 651 suitable for guarded or automated cells where pneumatic control and compact geometry are required. What material is the housing made from and how does it resist corrosion? The housing is galvanised, providing a protective zinc layer that helps resist corrosion from coolants and humid shop-floor conditions. Is the pressing force the same as the holding force? No. The pressing force (4,500 N) refers to the actuator’s engagement force, while the holding force (5,000 N) indicates the static retention capacity once the clamp is closed. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp Vertical Base Zinc-Plated 1,200 N Holding Force, 1,400 N Clamp Force - Kukamet
Take advantage of a compact, zinc‑plated pneumatic clamp that combines reliable clamping and holding forces with a vertical‑foot mounting for straightforward integration into fixtures; order via Metav Werkzeuge or consult the team for application guidance. Pneumatic clamp 652 — Kukamet zinc‑plated, 90° vertical‑foot The Pneumatic clamp 652 is a zinc‑plated pneumatic clamping unit designed for secure fixture holding in production and workshop environments. Zinc‑plated corrosion protection Vertical‑foot mounting Clamping force 1,200 N Holding force 1,400 N Faster, repeatable clamping for continuous production The Pneumatic clamp 652 delivers controlled pneumatic actuation that enables rapid, repeatable cycles, reducing fixture set‑up time and increasing throughput. With a maximum clamping force of 1,200 N and a holding force of 1,400 N, the device secures components consistently under load, so fixtures remain stable during machining or assembly. The pneumatic operation is suitable for automated sequences and reduces manual handling, supporting smoother production workflows and predictable process outcomes. Corrosion‑resistant finish for longer service life A zinc‑plated surface provides effective corrosion resistance in workshop atmospheres, extending service intervals and reducing maintenance effort. The galvanised finish protects the mechanical surfaces from rust and wear in mixed‑use production areas, which helps preserve functional tolerances and prolongs the unit’s operational life. For operations that prioritise uptime, the low‑maintenance nature of a treated surface supports dependable performance over repeated cycles. Compact vertical mounting that simplifies integration Designed with a vertical foot mounting and a 90° locking angle, the clamp integrates easily into jigs and fixtures where upright attachment is required. The compact body and a mass of 0.57 kg allow installation in space‑constrained assemblies without adding unnecessary inertia. The defined 90° locking orientation provides clear mechanical positioning for repeatable clamping, while the vertical mount keeps the force vector aligned with many common tooling arrangements. Application focus: fixtures, jigs and repetitive tasks Suited to general workshop and industrial fixturing, the unit is particularly effective where a robust, fast pneumatic clamp is needed for repetitive tasks. The combination of modest weight, zinc‑plated durability and measurable clamping/holding figures makes it a practical choice for production lines, assembly stations and test fixtures where reliable part retention is essential. Integration into pneumatic control systems is straightforward, and the clamp’s specification supports consistent process control across batches. Contact Metav Werkzeuge today to specify the Kukamet pneumatic clamp 652 for fixture projects or request tailored technical advice by email info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data SKU: 652-2 GTIN: 8680731503906 Brand: Kukamet eClass: 21021004 ETIM: EC011973 Key figures Weight: 0.57 kg Clamping force: 1,200 N Holding force: 1,400 N Angle: 90° Mounting: Vertical foot Materials & features Finish: Zinc‑plated Material: Zinc‑plated steel Mounting type: Vertical foot Arm: Not applicable Special features: None FAQ What forces does the clamp provide? The Kukamet pneumatic clamp 652 offers a maximum clamping force of 1,200 N and a holding force of 1,400 N, suitable for consistent fixture retention. Is the clamp suitable for use in production fixtures? Yes, the unit is designed for jigs and fixtures in production environments where repeatable pneumatic clamping and a fixed 90° lock are needed. What finish and corrosion protection does it have? The device features a zinc‑plated finish that provides corrosion resistance appropriate for workshop and light industrial conditions. How is the clamp mounted? Mounting is via a vertical foot, enabling upright installation and direct force transmission into the fixture base. What is the weight and are full dimensions available? Weight is 0.57 kg; for full dimensional drawings refer to the product catalogue or technical datasheet included with the item. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp Vertical Handle, 2000 N Thrust, Zinc Plated, 0.985 kg - Kukamet
The compact design and robust construction combine fast pneumatic actuation, galvanised corrosion resistance and a high holding force of 2,500 N for reliable fixture performance; order the pneumatic clamp directly via Metav Werkzeuge or ask our consultants if needed. 651 Pneumatic Clamp by Kukamet — vertical-foot mounting, 2,500 N holding force The 651 Pneumatic Clamp is a compact pneumatic clamping solution for jigs and fixtures, engineered for vertical-foot mounting and equipped with a vertical handle for space-saving operation. Pneumatic actuation for fast clamping Vertical handle and vertical-foot mounting Galvanised construction for corrosion resistance Holding force up to 2,500 N Faster cycle times through pneumatic actuation The pneumatic drive delivers consistent, repeatable motion, shortening cycle times and reducing setup variance. With a max clamping force of 2,000 N and a holding force of 2,500 N, the unit secures workpieces reliably during machining cycles. The pneumatic mechanism removes the need for manual leverage, enabling faster fixtures and fewer operator steps. For production environments where throughput and repeatability matter, the clamping system contributes directly to process efficiency and predictable output. Robust construction for long service life A galvanised housing and simple mechanical layout minimise corrosion and wear, supporting long service intervals and predictable replacement planning. The vertical handle and vertical-foot mounting reduce interference in dense fixture arrangements, allowing closer part nesting and more compact tooling designs. At under 0.985 kg, the assembly is lightweight while still offering substantial holding performance, making it suitable for modular fixtures and clamping frames where mass and balance are considerations. Clear technical advantages and practical maintenance Understanding the difference between clamping and holding values helps when designing fixtures: clamping force refers to the active force applied during actuation, while holding force indicates the residual securement under load. The unit’s sealed pneumatic components require only routine inspection and basic pneumatic maintenance—periodic checks for air leaks, seal condition and lubrication keep performance constant. The simple geometry of the device makes integration into existing fixtures straightforward and supports rapid replacement when reconfiguration is needed. Contact Metav Werkzeuge for tailored fixture advice and to secure a Kukamet 651 pneumatic clamp with reliable supply from our Emmerich warehouse Technical data Article number: 651-3-H GTIN: 8680731503500 eClass: 21021004 ETIM: EC011973 Core technical data Max clamping force: 2,000 N Max holding force: 2,500 N Weight: 0.985 kg Clamping angle: 90° Features & construction Pneumatic clamp Galvanised finish Vertical handle Vertical-foot mounting FAQ What is the difference between clamping force and holding force? Clamping force is the actuation force applied during operation, while holding force is the maximum static retention; the 651 Pneumatic Clamp lists 2,000 N clamping and 2,500 N holding force. How is the clamp mounted in a fixture? The device uses a vertical-foot mounting and a vertical handle, allowing secure attachment to fixture plates and space-saving orientation in jigs. Is the finish suitable for harsh shop environments? The galvanised finish on the Kukamet pneumatic clamp provides corrosion resistance suitable for standard workshop and production atmospheres. Can the clamp be integrated into modular tooling systems? Yes; the compact form factor and sub-1 kg mass facilitate integration into modular fixture assemblies and rapid reconfiguration. Are maintenance requirements complex for this clamp? Maintenance is straightforward: check pneumatic seals and connections, inspect for wear, and keep components clean to maintain consistent clamping performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp With Horizontal Base, 2.5 kN Thrust, 9 kN Holding Force, Zinc Plated - Kukamet
Take advantage of robust performance, fast pneumatic actuation and reliable corrosion protection for consistent workholding in production and jigs. Benefit from compact mounting with a horizontal base and high holding capacity to reduce fixture downtime. Order the Pneumatic toggle clamp 681 directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic toggle clamp 681 by Kukamet — horizontal base, zinc-plated finish The Pneumatic toggle clamp 681 is a pneumatic workholding device designed for secure fixture tasks where rapid, repeatable clamping and strong holding capacity are required. Zinc-plated finish for corrosion protection Horizontal base for secure bench mounting Pneumatic cylinder enables rapid clamping Max clamping force 2,500 N for firm fixation Holding force 9,000 N for safe workholding Faster cycle times through pneumatic actuation and defined forces The combination of a pneumatic cylinder and toggle geometry provides fast, repeatable actuation, which reduces cycle times in batch production and jig applications. With a max clamping force of 2,500 N and a holding force of 9,000 N, the device delivers clear, measurable performance that supports process reliability and part repeatability. The high holding capacity is particularly useful where vibration or secondary operations might otherwise unsettle the workpiece. The zinc-plated surface offers basic corrosion resistance, keeping the clamping surfaces serviceable in workshop environments and minimising unplanned maintenance. Robust design for secure fixtures and simplified integration The clamp’s horizontal base design allows stable bench or fixture mounting and simplifies alignment in existing tooling. The combination of lever-style mechanics and pneumatic drive results in a compact actuator with a predictable clamping stroke, making it suitable for repetitive production, assembly fixtures and inspection jigs. Because the device is zinc-plated, wear points are protected against surface corrosion, which supports longer uptime and steadier repeatability. The overall mass of 5.565 kg contributes to a solid feeling during operation while remaining manageable for fixture designers. Practical installation and straightforward upkeep for long service life Installation is straightforward: the horizontal mounting foot permits direct bolting to plates or tooling blocks at a right angle (90°), and the pneumatic actuation is compatible with standard compressed-air systems. Routine upkeep is limited to checking pneumatic connections and ensuring sliding or pivot surfaces remain clean; the protective finish reduces corrosion-related wear. For applications that demand consistent clamping force and fast cycles, this model integrates reliably into both small-series and medium-volume production setups, providing a balance between compact design and measurable holding performance. Contact Metav Werkzeuge in Emmerich to confirm mounting details and secure the Kukamet Pneumatic toggle clamp 681 for prompt delivery from stock. Technical Data Article number: 681-4 GTIN: 8680731506600 Brand: Kukamet Facts Max. clamping force: 2,500 N Max. holding force: 9,000 N Weight: 5.565 kg Angle: 90° Special features Material: Zinc-plated Mounting: Horizontal base Actuation: Pneumatic cylinder Model: 681 SKU: 681-4 FAQ What is the maximum clamping force of this clamp? The Kukamet Pneumatic toggle clamp 681 provides a maximum clamping force of 2,500 N and a holding force rated at 9,000 N. Can the clamp be mounted directly to a workbench or fixture plate? Yes; the horizontal base is designed for direct bolting to bench tops or fixture plates at a 90° orientation. Is the surface finish resistant to workshop conditions? The device is zinc-plated, which offers corrosion protection suitable for many workshop environments and helps extend service intervals. Which actuation media does the clamp require? The clamp uses a pneumatic cylinder and is compatible with standard compressed-air supplies; it is intended for integration with pneumatic control lines. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp With Horizontal Base, 6.5 kN Thrust, 30 kN Holding Force, Zinc-Plated - Kukamet
Gain dependable clamping performance by combining robust galvanised construction, pneumatic actuation and a holding force of 30,000 N; ideal for repeatable production cycles and secure fixture retention. Order the pneumatic clamp directly via Metav Werkzeuge or consult the technical team for integration advice. Pneumatic clamp 681-8 — Horizontal-base clamp with pneumatic cylinder by Kukamet The pneumatic clamp 681-8 is a horizontal-base industrial clamp designed for 90° workholding tasks, offering high holding capacity and pneumatic actuation for rapid, repeatable clamping in production environments Pneumatic cylinder actuation Horizontal base mount Holding force 30,000 N Galvanised steel corrosion resistance Reliable hold for serial production and safety-critical fixtures The unit delivers a holding force of 30,000 N combined with a maximum pressing force of 6,500 N, giving a measurable safety margin for many clamping tasks in metalworking and assembly. These numeric values translate directly into lower slippage risk and improved process stability, which helps reduce rework and scrap rates. Where consistent repeatability matters, the mechanical design ensures every cycle applies the same clamping effort, aiding quality assurance and predictable throughput in production lines. Faster cycles through pneumatic actuation and simple integration Equipped with a pneumatic cylinder, the clamp converts compressed air into reliable clamping movement, shortening cycle times compared with manual or mechanically driven options. The horizontal base configuration simplifies mounting to fixture plates or machine tables and supports compact station layout. At approximately 20.475 kg, the unit is robust enough for industrial use yet manageable for integration into jigs and automated cells. Pneumatic operation reduces operator effort and supports automation, resulting in measurable efficiency gains on the shop floor. Durable construction and low-maintenance operation for long service life Constructed from galvanised steel, the clamp resists corrosion in typical workshop atmospheres and demands minimal surface care. The lever-style concept translated into a pneumatically driven mechanism combines proven mechanical simplicity with modern actuation, lowering service needs. Routine inspection of seals and a light lubrication schedule for pivot points are usually sufficient to maintain performance over time. Supplied as an industrial-grade component, the unit is suitable for demanding environments where uptime and consistent clamping are priorities. For reliable, high-capacity clamping in production, contact Metav Werkzeuge to discuss supply and application support for the Kukamet pneumatic clamp 681-8 and bespoke integration options from our Emmerich facility. Technical Data SKU: 681-8 GTIN: 8680731506617 Manufacturer: Kukamet eClass: 21021004 ETIM: EC011973 Material: Galvanised Key figures Holding force: 30,000 N Pressing force (max): 6,500 N Weight: 20.475 kg Materials & special features Galvanised steel With pneumatic cylinder Horizontal foot mounting Lever-style clamp design FAQ Is the clamp suitable for heavy-duty workshop fixtures? Yes. The pneumatic clamp 681-8 provides a holding force of 30,000 N and a pressing force of 6,500 N, making it suitable for demanding fixture applications in metalworking and assembly. How is the unit mounted to a fixture or machine table? The clamp is mounted via a horizontal base (horizontal foot), which allows bolting to plates or tables for secure and repeatable positioning. Does the construction protect against corrosion? The component is galvanised, offering enhanced corrosion resistance for typical workshop environments and reducing the need for intensive surface maintenance. Can the clamp be integrated into existing pneumatic circuits? Yes. The clamp features a pneumatic cylinder that can be connected to standard compressed-air supplies; for exact connection details and required air parameters, refer to the product documentation or consult Metav Werkzeuge. What maintenance is required to ensure long service life? Periodic inspection of pneumatic seals, checking for secure mounting, and light lubrication of moving joints will maintain reliable operation and long service life for the clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp With Horizontal Foot, 4 000 N Cylinder Force, 18 000 N Holding Force, Zinc Plated - Kukamet
Take advantage of the combination of high holding force, fast pneumatic actuation and robust galvanised construction for reliable fixture clamping in production environments. Order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Pneumatic Clamp 681 — Horizontal-base toggle clamp with pneumatic cylinder (Kukamet) The Pneumatic Clamp 681 is a pneumatic toggle clamp designed for secure workpiece holding in production fixtures, welding jigs and assembly lines. Pneumatic cylinder for fast actuation Horizontal foot for stable mounting Galvanised finish for corrosion resistance Secure clamping where stability matters The Pneumatic Clamp 681 delivers a clear mechanical advantage for demanding fixtures: a holding force of 18,000 N combined with an actuation force of 4,000 N gives both secure retention and energy-efficient operation. The distinct separation between actuation and holding forces means smaller pneumatic components can be used to generate reliable clamp pressure, reducing cycle times and compressed-air consumption. The 90° toggle geometry provides a positive locked position, limiting movement under vibration and improving repeatability on production runs. Designed for durable workshop use and straightforward mounting Constructed with a galvanised finish and a horizontal foot for mounting, this toggle clamp resists corrosion in workshop and shop-floor environments while offering a stable platform for fixture integration. The integrated pneumatic cylinder reduces manual effort and wear on mechanical linkages, which lowers maintenance intervals and keeps downtime to a minimum. At approximately 9.66 kg, the assembly balances robustness and handling for straightforward incorporation into modular jigs without excessive ballast. Efficient integration into fixtures and process improvement This clamp is suited to automated and semi-automated cells where consistent clamping force and repeatability improve throughput and quality. The pneumatic actuation provides quick actuation for short cycle times, while the toggle lock ensures parts remain stationary during machining, welding or inspection operations. Using a standardised clamp such as this simplifies spare-part management and reduces setup variation across multiple stations, supporting lean production and better first-pass yield. Contact Metav Werkzeuge for a tailored quotation, technical drawings and advice on integrating the Kukamet Pneumatic Clamp 681 into existing fixtures Technical data SKU: 681-6 GTIN: 8680731509908 Manufacturer: Kukamet Facts Weight: 9.66 kg Max actuation force: 4,000 N Max holding force: 18,000 N Toggle angle: 90° ECLASS: 21021004 ETIM: EC011973 Special features Galvanised material With pneumatic cylinder Horizontal foot mounting Category: Spanner FAQ What is the difference between actuation force and holding force for this clamp? Actuation force refers to the pneumatic force required to move the mechanism (listed as 4,000 N), while holding force is the clamping retention once locked (listed as 18,000 N) for the Kukamet Pneumatic Clamp 681. Can the clamp be mounted directly to a fixture plate? Yes. The clamp features a horizontal foot designed for secure mounting to fixture plates and modular tooling systems. Is the surface finish suitable for humid workshop environments? The galvanised finish provides corrosion resistance suitable for typical workshop conditions and helps extend component life. Which applications are best suited to this pneumatic toggle clamp? Typical applications include welding jigs, assembly lines and machining fixtures where fast, repeatable clamping and positive locking are required. Does the clamp require special pneumatic controls? No specialised controls are required; standard pneumatic valves and fittings are sufficient to operate the cylinder at the specified actuation force. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp With Massive Holding Arm, 1200 N Push / 1400 N Hold, Zinc-Plated - Kukamet
Take advantage of a robust, galvanised design, 1,400 N holding force and compact 162 mm reach for dependable production clamping. Order the pneumatic clamp directly via Metav Werkzeuge or request advice from our consultants for seamless integration. 652 Pneumatic Clamp – Vertical-foot, 1,400 N holding force (Kukamet) The 652 pneumatic clamp is a vertical-foot, 90° clamping device designed for repetitive holding tasks in workshop and light industrial production settings. Massively reinforced holding arm Galvanised construction for corrosion resistance 1,400 N maximum holding force Vertical-foot mounting for bench or fixture fit Reliable clamping performance that keeps lines moving The device delivers consistent, measurable clamping through pneumatic actuation, combining a maximum holding force of 1,400 N with a separate actuation force of 1,200 N. This separation of holding and actuation values supports secure workholding without overstressing components, which improves cycle reliability. The vertical-foot mounting provides a compact footprint and straightforward integration into jigs and fixtures, while the 162 mm arm reach enables clamping across typical workpiece geometries. For operations where repeatability and throughput are priorities, this configuration reduces setup time and minimises rework. Built for durability and low-maintenance operation Constructed in galvanised steel with a massive holding arm, the clamp withstands shop-floor conditions and resists surface corrosion that can impair repetitive assemblies. Pneumatic actuation architecture keeps mechanical complexity low: fewer moving parts mean simplified maintenance and longer intervals between inspections. The robust design translates into predictable life-cycle performance, lowering total cost of ownership through reduced downtime and fewer replacements. Practical integration and safe handling in production A 90° clamping angle facilitates secure positioning for welding, machining or assembly steps where angular retention is essential. The unit’s pneumatic operation allows for rapid, tool-free actuation via existing compressed air systems and supports automation or semi-automatic fixtures. Technical staff benefit from a clear separation of clamping and holding forces, which simplifies cycle tuning and ensures that clamping pressure can be adjusted to the process requirement without compromising fixture stability. The compact footprint and vertical mounting plate ease retrofitting onto existing workstations. Specification-led benefits for procurement and production planners Because the clamp is presented as a finished industrial component with defined force and mounting parameters, planners can specify it directly into bills of materials and fixture drawings. The compact 162 mm arm and fixed 90° angle reduce the need for custom adapter work, accelerating fixture build times. The galvanised finish supports use in workshops where humidity or coolant exposure would otherwise require additional protective measures. Discuss specification and supply of the Kukamet 652 pneumatic clamp with Metav Werkzeuge for fast delivery, technical clarification and fixture-matching advice Technical data SKU: 652-2-D-C3 GTIN: 8680731506068 Brand: Kukamet ECLASS: 21021004 ETIM: EC011973 Core measurements Arm length: 162 mm Clamping angle: 90° Actuation force (max): 1,200 N Holding force (max): 1,400 N Materials & special features Material: galvanised steel Mounting: vertical foot Massive holding arm present Pneumatic actuation Category: clamps Storytrigger: lever clamp FAQ What maximum holding force does the clamp provide? The Kukamet 652 pneumatic clamp provides a maximum holding force of 1,400 N; the pneumatic actuation delivers up to 1,200 N of actuation force. How is the clamp mounted to a fixture or bench? Mounting is by a vertical foot plate designed for direct attachment to workbenches, fixture plates or custom jigs; the vertical-foot arrangement keeps the unit compact on the assembly surface. Is the surface finish suitable for humid shop environments? Yes, the galvanised finish gives corrosion resistance suitable for many workshop conditions and helps protect the clamp in everyday use. Can the clamp be used for automated lines? The pneumatic actuation is compatible with automated or semi-automated systems and can be integrated with existing compressed-air control circuits for cycle-timed operation. Which reach does the clamp offer for typical workpieces? The clamp features a 162 mm arm reach, which covers common clamping distances in small- to medium-sized fixtures and jigs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Pneumatic Clamp With Vertical Handle And Solid Holding Arm, 2,000 N Force, Galvanised - Kukamet
Benefit from a robust combination of high clamping force, corrosion-resistant construction and a compact 167 mm reach that keeps fixtures secure and accessible. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. 651 Pneumatic clamp — vertical-handle 90° clamp by Kukamet, galvanised, 2,500 N holding force A 651 Pneumatic clamp engineered for reliable 90° clamping in industrial fixturing, featuring a vertical foot mount and a solid, galvanised holding arm. Vertical handle for fast actuation Massive galvanised holding arm 167 mm reach for flexible positioning 2,500 N maximum holding force Consistent clamping force for dependable cycle times The pneumatic design delivers a controlled clamping sequence, with a maximum 2,000 N actuation force producing up to 2,500 N holding force, ensuring secure fixation of workpieces during machining and assembly. This relationship between actuation and holding values means repeatable clamping pressure across cycles, reducing rework and improving throughput. The force figures are useful when matching the clamp to existing jigs or calculating fixture safety margins; the numerical ratings allow direct comparison with other industrial clamps and support decision-making during fixture design. Built for harsh workshop environments and long service life Constructed from galvanised steel with a massive holding arm, the unit resists corrosion and mechanical wear typical in metalworking shops. The vertical handle and compact lever geometry concentrate actuation into a short, ergonomic motion, while the 90° orientation suits right‑angle locating and common fixture layouts. These attributes contribute to lower maintenance intervals and a longer effective service life, translating into fewer interruptions and a more predictable production rhythm. Easy integration into existing fixtures and safer operation A 167 mm reach provides practical access to clamping points without requiring layout changes, and the vertical foot mounting simplifies installation on horizontal plates or tooling blocks. The clamp’s lever-style actuation and clear mechanical travel make it straightforward to incorporate into pneumatic circuits and automated systems where pneumatic toggle clamps are required. Operator handling is more consistent with a vertical grip, reducing the risk of improper engagement and supporting safer, faster changeovers at the workbench. Contact Metav Werkzeuge for tailored fixturing advice or to request the Kukamet 651 pneumatic clamp for your production line; our consultants in Emmerich will advise on application suitability and integration options Technical Data Article number: 651-3-H-D-C3 Manufacturer: Kukamet Material: Galvanised Mounting: vertical foot Core technical data Arm (reach): 167 mm Angle: 90° Maximum actuation force: 2,000 N Maximum holding force: 2,500 N eClass: 21021004 ETIM: EC011973 Special features Vertical handle for lever-style actuation Massive, solid holding arm Suitable for right-angle clamping Corrosion protection by galvanising Catalogue page available (see product assets) FAQ What clamping force can be expected from this clamp? The Kukamet 651 pneumatic clamp provides up to 2,500 N holding force, with a maximum actuation force of 2,000 N, suitable for medium to heavy-duty fixturing tasks. How is the clamp mounted to a fixture plate? Mounting is via a vertical foot, designed for secure attachment to horizontal tooling plates or fixture blocks; the vertical orientation supports compact layout and stable clamping at 90°. Is the holding arm suitable for harsh workshop environments? Yes, the holding arm is massive and the clamp is galvanised, offering enhanced resistance to corrosion and mechanical wear common in manufacturing environments. What reach does the clamp provide for positioning workpieces? The clamp has a reach of 167 mm, allowing flexible positioning of the clamping point relative to the mounting location. What is the product SKU for ordering and reference? The clamp is listed as SKU 651-3-H-D-C3 and marketed as the Kukamet 651 Pneumatic clamp, useful for procurement and spare-part identification. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp 1400 N Clamping Force, 1625 N Holding Force, Galvanised - Kukamet
Take advantage of a compact, galvanised lever clamp that pairs a sturdy vertical-foot mount with high clamping and holding forces for reliable workholding in jigs and fixtures. Benefit from the combination of corrosion resistance, measurable performance and simple integration into existing fixtures. Order the vertical clamp directly via Metav Werkzeuge or request application advice from their specialists. Vertikalspanner 252 — Vertical lever clamp with galvanised finish and vertical-foot mounting (Kukamet) The Vertikalspanner 252 is a compact vertical lever clamp designed for secure, repeatable clamping in fixtures and jigs across workshop and light industrial environments. Galvanised steel construction for corrosion resistance Vertical-foot mounting for sturdy installation Max clamping force 1,400 N; holding 1,625 N Robust construction that keeps production moving The clamp is built as a compact lever clamp with a galvanised finish, offering durable protection against corrosion and wear. This construction reduces downtime for maintenance and preserves clamping accuracy over repeated cycles. The solid design delivers consistent performance, supporting stable production processes where repeatability is essential. As a consequence, fixture lifecycles are extended and quality control is simpler to maintain without frequent replacements. Quick and secure integration into jigs and fixtures With a vertical-foot mounting arrangement, the unit is intended for straightforward attachment to plates and bases commonly used in jigs. The mounting style simplifies alignment and secures the clamp against lateral movement during operation, which reduces setup time and makes the component suitable for series production or frequent changeovers. The compact footprint also helps when space in a fixture is limited, enabling tighter nesting of workpieces without sacrificing accessibility. Measurable clamping performance for safer machining The clamp delivers a max clamping force of 1,400 N and a max holding force of 1,625 N, values that translate directly into reliable workpiece retention during machining, assembly or inspection tasks. These figures allow planners to match the component to process forces, reducing the risk of slippage and rework. The clear numerical specification supports engineering decisions and helps quantify safety margins for process design, making load calculations and fixture validation more straightforward. Practical choice for workshops and small production lines Lightweight yet robust, the unit suits both craft workshops and production environments where a compact, dependable clamp is required. The combination of durable surface treatment and measurable force characteristics positions it as an effective solution for repeatable clamping tasks. Metav’s application advisers can provide guidance on fixture layout and integration, helping to align the clamp’s capabilities with the specific demands of machining or assembly processes. For durable clamping with clear performance data from Kukamet, contact Metav Werkzeuge in Emmerich for ordering and tailored technical advice by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 252-3 GTIN: 8680731504545 ETIM: EC011973 ECLASS: 21041717 Article: Vertikalspanner 252 Manufacturer: Kukamet Core specifications Material: galvanised steel Max clamping force: 1,400 N Max holding force: 1,625 N Weight: 0.27 kg Mounting: vertical foot Special features Compact lever clamp design Durable corrosion protection Suitable for fixture and jig integration Product images and datasheet available FAQ What is the mounting method for this clamp? The vertical-foot mounting secures the clamp to plates and bases; the Vertikalspanner 252 is designed for fixed attachment in fixtures. What clamping and holding forces does the clamp provide? The unit offers a max clamping force of 1,400 N and a max holding force of 1,625 N, suitable for secure retention in many machining and assembly tasks. Is the clamp suitable for series production use? Yes, the galvanised finish and compact lever design make this vertical clamp from Kukamet appropriate for repeatable operations on production lines. How heavy is the clamp and does weight affect fixture design? With a weight of 0.27 kg, the clamp is lightweight, allowing denser fixture layouts without significant added mass. Are technical documents or images available for planning? Datasheet and product images are available and referenced for the Vertikalspanner 252 to assist with fixture planning and integration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp Horizontal Base 1,400 N Clamping Force, 1,625 N Holding Force, Black Oxide - Kukamet
Take advantage of a compact lever clamp that combines a 1,400 N clamping force, a robust 1,625 N holding capacity and a space-saving horizontal foot to keep production and fixtures reliable; order the Vertical clamp 251 directly via Metav Werkzeuge or ask our consultants if needed Vertical clamp 251 – vertical lever clamp with 1,400 N clamping force The Vertical clamp 251 is a 90° lever clamp designed for stable fixturing and repeatable clamping in small to medium workshop assemblies Vertical lever clamp, 90° design Clamping force up to 1,400 N Holding force up to 1,625 N Horizontal foot for stable mounting Consistent clamping for repeatable production The 90° lever clamp delivers a defined 1,400 N clamping force that keeps components secure during machining and assembly. The separate holding specification of 1,625 N describes the maximum resistance against opening once set, which supports process stability in repetitive operations. By converting these numeric values into reliable fixture behaviour, the device reduces repositioning and inspection time, enabling more consistent cycle output and fewer stoppages caused by loose workpieces. Space‑saving mounting and fast fixture integration A horizontal foot base allows the clamp to be mounted on flat plates or fixture blocks without additional adapters, simplifying integration into existing jigs. Its right‑angle (90°) orientation positions the clamping arm clear of the workpiece, optimising accessibility and tool paths. At only 0.27 kg, the unit is lightweight for quick handling but rigid enough for stable operation, making it suitable for compact fixtures where footprint and easy reconfiguration matter. Durable surface and maintenance‑friendly design The blackened/brunished surface finish provides basic protection against wear and reduces glare at the workplace, while the simple lever mechanism avoids complex moving parts that require frequent servicing. The mechanical design is straightforward to inspect and lubricate, which shortens maintenance intervals and keeps downtime low. Supplied as a lever clamping element, the component is ideal where robust, no‑frills clamping is preferred over hydraulic or pneumatic alternatives. For reliable, compact clamping delivered through Metav Werkzeuge, contact our sales team to discuss the Vertical clamp 251 (SKU B251-3) and ensure the right fixture integration for your application Technical data Article number: B251-3 GTIN: 8680731508123 eClass: 21041717 ETIM: EC011973 Facts Clamping force (max): 1,400 N Holding force (max): 1,625 N Weight: 0.27 kg Angle: 90° Special features Mounting: horizontal foot Finish: blackened / brunished Type: lever clamp Manufacturer: Kukamet SKU: B251-3 FAQ What maximum clamping force does this clamp provide? The Vertical clamp 251 offers a maximum clamping force of 1,400 N, providing secure holding for typical workshop fixtures. How much holding force can be expected after clamping? Holding force for the unit is specified as 1,625 N, which indicates the resistance to opening once the lever is engaged. How is the clamp mounted to a fixture plate? Mounting is carried out via the horizontal foot, enabling direct attachment to flat plates or blocks without special adapters. What angle does the clamping arm have relative to the base? The clamping arm is positioned at 90°, which keeps the arm clear of the workpiece and simplifies tool access. Is the surface treated to reduce wear and corrosion? The component features a blackened / brunished finish that offers surface protection and reduced reflectivity for workshop use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp Horizontal Base 2,000 N Thrust, 3,370 N Holding Force, Black Oxide Finish - Kukamet
Take advantage of reliable clamping performance and compact design to streamline fixture setup; the combination of 2,000 N clamping force, a robust blackened finish, and a stable horizontal base supports consistent results in small-series production. Order the clamp directly via Metav Werkzeuge or consult their specialists for application-specific advice. Vertical clamp 251 — Kukamet, 90° lever clamp with horizontal base and 2,000 N clamping force The Vertical clamp 251 is a horizontal-base lever clamp designed for 90° clamping applications in jigs, fixtures and assembly stations, offering rapid engagement and secure holding for repeatable production steps. Horizontal base for stable mounting Clamping force 2,000 N Holding force up to 3,370 N Consistent clamping that speeds up production The lever design delivers a defined clamping stroke and a clear mechanical advantage, providing a reproducible clamping force of 2,000 N and a holding force of 3,370 N. This results in uniform part retention across cycles, reducing rework and inspection time. The mechanical principle is simple to integrate into fixture plates and ensures the clamp remains engaged under process vibrations; the controlled action supports higher throughput when multiple clamps are used in parallel. Built for workshop durability and compact integration A blackened finish provides corrosion resistance and a subdued surface that minimises glare at the workbench. The compact unit, weighing 0.71 kg, mounts via a horizontal base and locates parts at a precise 90° angle, making it suitable for confined fixture spaces where robust contact and compact geometry are required. The construction supports long service life under normal workshop conditions and simplifies replacement without extensive rework of existing tooling. Faster set-up and simple handling for operators As a lever clamp, the device enables quick manual operation and rapid part changeovers, which translates into shorter setup times and improved takt in assembly processes. The clamp is well suited to repetitive tasks in small-batch production and fixturing; its mechanical action is easy to understand for operators and maintenance staff, reducing training effort. If uncertainty remains about compatibility with a specific fixture layout, Metav's technical advisors can provide guidance on integration and positioning. Contact Metav Werkzeuge for tailored fixture recommendations and specify the Kukamet vertical lever clamp 251 (SKU B251-4) for reliable 2,000 N clamping performance in your production setup Technical data SKU: B251-4 GTIN: 8680731508147 Manufacturer: Kukamet Category: Spanner Model: 251 Facts Clamping force (max): 2,000 N Holding force (max): 3,370 N Angle: 90° Weight: 0.71 kg EClass: 21041717 ETIM: EC011973 Special features Mounting: horizontal base Finish: blackened Type: lever clamp Special feature: none FAQ What clamping and holding forces does the clamp provide? The vertical clamp 251 provides a maximum clamping force of 2,000 N and a holding force of up to 3,370 N, suitable for reliable retention in assembly and fixturing tasks. How is the clamp mounted to a fixture? Mounting is via a horizontal base; the unit is designed for secure attachment to fixture plates where a 90° clamping orientation is required. Is the surface finish suitable for workshop environments? Yes, the blackened finish offers basic corrosion protection and a low-reflective surface that is appropriate for standard workshop conditions. Can the clamp be used for quick manual part loading? The lever mechanism is intended for rapid manual operation and supports fast changeovers and straightforward handling in repetitive processes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp Horizontal Base Zinc Coated 470 N Thrust, 700 N Holding Force - Kukamet
Take advantage of a reliable, galvanised vertical clamp that combines robust holding force with compact installation; its horizontal foot mounting and 90° orientation make it suitable for repetitive jigs and fixtures. Order the unit directly via Metav Werkzeuge or contact our consultants for technical clarification. Vertikalspanner 251 – Vertical toggle clamp with galvanised finish and 90° angle (Kukamet) Vertikalspanner 251 is a compact vertical toggle clamp designed to secure workpieces at a fixed right angle in fixtures, assembly jigs and production aids. Galvanised steel construction Compact 90° vertical clamping Holding force up to 700 N Secure, measurable clamping for repeatable assembly The 251 model delivers precise, repeatable retention thanks to a defined clamping force and a higher holding force that keeps components stable during machining or assembly. The specified values of 470 N (clamping) and 700 N (holding) indicate the forces available during engagement and static retention respectively; this distinction helps when selecting a fixture for dynamic operations versus static holding. Using clear numerical data supports integration into process planning and risk assessment, ensuring the clamp meets required safety and functional margins. Built for workshop durability with a corrosion-resistant finish Constructed from galvanised steel, the clamp resists corrosion and routine workshop wear, extending maintenance intervals and reducing downtime. Its lightweight design at approximately 0.065 kg keeps added mass on moving fixtures minimal, which is beneficial for manual jigs or automated handlers where inertia and balance matter. The protective finish also simplifies cleaning and inspection routines, translating technical longevity into tangible productivity for everyday shop-floor use. Simple integration into fixtures and precise 90° positioning The clamp’s horizontal foot mounting enables straightforward attachment to plates and bases commonly used in jig construction, while the fixed 90° angle ensures consistent part orientation without adjustments. As a lever-operated toggle clamp, it offers rapid engagement and release, making it suitable for high-frequency production sequences and manual assembly stations. For bespoke fixture layouts or verification of compatibility with existing tooling, Metav’s specialists can provide application guidance and specification checks. Contact Metav Werkzeuge for personalised advice on the Kukamet Vertikalspanner 251, technical compatibility and delivery options from our Emmerich facility Technical data Article number: 251-2 GTIN: 8680731504231 Brand: Kukamet eClass: 21041717 ETIM: EC011973 Facts Clamping force: 470 N Holding force: 700 N Angle: 90° Weight: 0.065 kg Special features Material: galvanised steel Mounting: horizontal foot Type: vertical toggle clamp Special feature: none FAQ What forces does this clamp provide? The Vertikalspanner 251 provides a clamping force of 470 N and a holding force of 700 N, values intended for secure retention in assembly and light machining tasks. Is the clamp suitable for corrosive workshop environments? Yes, the galvanised finish on the Vertikalspanner 251 offers enhanced resistance to corrosion and workshop contaminants. How is the clamp mounted to a fixture? The clamp uses a horizontal foot mounting arrangement, allowing direct attachment to base plates and fixture boards used in jigs. Can the clamp be used for high-frequency manual assembly? Its lever-operated toggle mechanism is designed for rapid engagement and release, making the clamp well suited to frequent manual cycles. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp Horizontal Base, 470 N Thrust, 700 N Holding Force, Blackened - Kukamet
Take advantage of the combination of compact design, reliable holding force and straightforward fixture integration to maintain consistent production flow; order the clamp directly via Metav Werkzeuge or contact the consultants for application advice. Vertical clamp 251 by Kukamet — 90° vertical clamping, horizontal-foot mounting A Vertical clamp 251 intended for secure vertical workholding in light fixtures and jigs, offering reliable clamping and low installation footprint 90° clamping angle for vertical operations 700 N holding force for secure positioning Robust blackened finish for surface protection Lightweight 65 g for compact fixture design Stable clamping that reduces rework and setup time The clamp delivers a clear performance specification: 470 N as maximum clamping force and 700 N as maximum holding force. The first value describes the active closing force produced at the lever, while the second indicates the resistance against pull-out under load. This distinction matters for fixture design because higher holding force reduces the risk of workpiece movement during machining or assembly. The compact form factor supports dense placement in modular fixturing systems and is intended to improve throughput by lowering setup time and rework rates. Bold mechanical figures provide a verifiable basis for engineering decisions. Low-profile finish and simple mechanical integration A blackened finish provides basic surface protection and a uniform appearance suited to workshop environments; the finish also minimises reflections where visual inspection is required. The component mounts via a horizontal foot, which allows the clamping arm to operate at a fixed 90° angle relative to the base plate, simplifying mechanical integration into existing jigs. At only 65 g, the clamp imposes minimal additional mass on movable subassemblies, which benefits balance and reduces wear on positioning elements. These attributes support quick retrofitting and compact fixture layouts without the need for specialised mounting hardware. Where this clamp fits and why Metav supply matters The device is aimed at light engineering, small-batch production, assembly benches and inspection jigs where a dependable vertical clamping action is required. The straightforward mechanical concept makes it suitable for repetitive positioning tasks and temporary fixture setups. Procurement through Metav Werkzeuge ensures access to a wide range of complementary components and a consistent quality filter from a central European warehouse. That supply reliability helps maintain production continuity and reduces the administrative overhead associated with sourcing multiple vendors. For reliable light-duty vertical clamping, choose the Kukamet 251 and contact Metav Werkzeuge for technical advice and stock information at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: B251-2 GTIN: 8680731508109 Manufacturer: Kukamet Weight: 0.065 kg Facts Clamping force (max): 470 N Holding force (max): 700 N Angle: 90° Weight: 65 g Special features Material/finish: blackened (Schwarz brüniert) Mounting: horizontal foot Type: vertical clamp No special additional features FAQ What is the maximum clamping force of this clamp? The Kukamet vertical clamp 251 provides a maximum clamping force of 470 N and a maximum holding force of 700 N (SKU B251-2). How is the clamp mounted to a fixture? Mounting is done via a horizontal foot; the Kukamet 251 is designed for simple attachment to base plates or fixture blocks. Is the surface treated for corrosion resistance? The clamp has a blackened finish (Schwarz brüniert) which offers basic protection suitable for workshop environments on the Kukamet 251. What applications is this clamp best suited to? The clamp is intended for light engineering, assembly jigs and small-batch production where a compact 90° vertical clamping action is required. How heavy is the clamp and does that affect fixture balance? At 65 g (0.065 kg), the Kukamet 251 is lightweight and suitable for dense fixture arrangements without significantly affecting balance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp Horizontal Foot, Safety Lock, 1.4 kN Thrust, Zinc-Plated, 1625 N Holding Force - Kukamet
Take advantage of the combination of compact design, robust clamping force and built‑in safety locking for secure, repeatable fixturing in production and assembly. Order the clamp directly via Metav Werkzeuge or consult our specialists for mounting options. Vertical clamp 251 – zinc‑plated vertical clamp with safety lock by Kukamet A Vertical clamp 251 designed to secure workpieces at a 90° angle with a horizontal mounting foot, suited to jigs, fixtures and small‑batch production. Safety lock for secure clamping Zinc‑plated corrosion protection Max clamping force 1,400 N Horizontal mounting foot, 90° orientation Consistent clamping performance for repeatable processes The 90° clamping arrangement and measurable force ratings deliver consistent clamping across repeated cycles. With a max clamping force of 1,400 N and a holding force of 1,625 N, operators benefit from predictable fixture behaviour that reduces rework and shortens setup validation times. The integrated safety lock prevents unintended release during machining or handling, translating technical specifications into practical reliability on the shop floor. This performance focus supports faster throughput while maintaining component integrity. Built to withstand workshop conditions with compact handling The device’s zinc‑plated finish provides basic corrosion resistance, making the clamp suitable for standard workshop environments and intermittent exposure to coolant or humidity. At a compact weight of 0.27 kg, the component is easy to position and incorporate into modular fixturing systems without adding excessive mass to the assembly. The horizontal mounting foot enables low‑profile installation on fixtures and plates, saving space and simplifying alignment. These construction choices reduce maintenance needs and extend service life under normal operating conditions. Simple integration into fixtures and jigs Designed for straightforward installation, the clamp mounts in a fixed 90° orientation via its horizontal foot, offering repeatable alignment for series production or single‑station work. The unit’s clear mechanical function and minimal moving parts mean that setup and replacement are rapid, supporting lean workflows. For special applications, the clamp can be combined with other holding elements to create bespoke clamping arrangements. Product identification and compatibility are traceable via the supplied article and SKU references to support spare‑part management and inventory control. For tailored advice on Kukamet clamping solutions and to discuss how the Vertical clamp 251 fits specific fixturing needs, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to arrange product selection and technical guidance. Technical data Article number: 251-3-L SKU: 251-3-L GTIN: 8680731504538 Manufacturer: Kukamet Key figures Max clamping force: 1,400 N Holding force: 1,625 N Angle: 90° Weight: 0.27 kg EClass: 21041717 ETIM: EC011973 Features & materials Material: Zinc‑plated Mounting: Horizontal foot Special feature: Safety lock Category: Spanner FAQ What maximum clamping force does the clamp provide? The Kukamet Vertical clamp 251 offers a maximum clamping force of 1,400 N and a holding force rated at 1,625 N. Is the clamp suitable for standard workshop environments? Yes, the zinc‑plated surface of the clamp gives basic corrosion resistance suitable for general workshop use and intermittent exposure to coolants. How is the unit mounted in a fixture? Mounting is via the horizontal foot in a fixed 90° orientation, allowing low‑profile attachment to plates and modular fixture systems. What is the weight of the clamp and how does that affect handling? The clamp weighs 0.27 kg, which makes it easy to position and replace in fixturing setups without adding undue mass. Does the clamp include a safety feature to prevent accidental release? A built‑in safety lock secures the clamping element in position and prevents unintended opening during machining or handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp Senkrechter Foot 2,000 N Thrust, 3,370 N Holding Force, Zinc-Plated - Kukamet
Take advantage of a compact, high-performance clamping solution that combines secure holding with corrosion-resistant durability; the unit delivers up to 2,000 N clamping force and a 3,370 N holding capability while remaining lightweight for easy fixture integration. Order the clamp directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Vertical toggle clamp 252 — Kukamet vertical-foot clamp with 2,000 N clamping force A Vertical toggle clamp 252 designed for dependable workholding in fixtures, jigs and assembly stations where repeatable vertical clamping and a compact footprint are required Kukamet vertical toggle clamp, vertical-foot mount 2,000 N clamping force for secure holding 3,370 N maximum holding force Zinc-plated finish for corrosion resistance Consistent clamp force for repeatable production quality The vertical-foot toggle offers a defined clamping force of 2,000 N, ensuring repeatable contact pressure across cycles. In practice, this means reduced variability in parts positioning and fewer rejects when the clamp is used in jig-mounted operations. The difference between the specified clamping force and the 3,370 N holding force is deliberate: the clamping force denotes the active squeeze applied to the workpiece, while the holding force indicates the maximum load the mechanism can resist once closed. For production planners this translates into reliable fixture performance and predictable process control. Compact design that simplifies integration and maintenance With a compact mass of 0.71 kg and a vertical-foot mounting arrangement, the device fits into tight assemblies without compromising accessibility. The zinc-plated finish provides a protected surface that slows corrosion in workshop environments, extending service life and reducing downtime for replacement. The 90° orientation positions the handle clear of tooling zones, enabling safe actuation and straightforward retrofitting into existing clamping banks. The simple lever mechanism minimises moving-part complexity, supporting fast maintenance and low total cost of ownership. Practical benefits on the shop floor and in fixture design Specified as a robust toggle clamp for general-purpose fixturing, the unit supports a wide range of applications from light assembly to machining set-ups where vertical clamping is required. The design facilitates quick part loading and secure retention during secondary operations, improving throughput and operator ergonomics. Its galvanised surface and compact footprint make it suitable for mixed-material production environments where corrosion resistance and space efficiency matter. The clamp’s predictable behaviour aids process optimisation and simplifies operator training. For tailored advice on integrating the Kukamet vertical-foot toggle into existing fixtures, or to place an order through Metav Werkzeuge, contact our team for expert support and delivery details Technical data Article number: 252-4 GTIN: 8680731506006 SKU: 252-4 Manufacturer: Kukamet Core figures Clamping force (max): 2,000 N Holding force (max): 3,370 N Weight: 0.71 kg Angle: 90° Materials & design Material: zinc-plated Mounting: vertical-foot Category: clamp (Spanner) FAQ What is the difference between clamping force and holding force for this clamp? The clamping force of 2,000 N refers to the active squeeze applied to the workpiece when the Vertical toggle clamp 252 is engaged; the 3,370 N holding force specifies the maximum load the closed mechanism can resist without release. Can the clamp be mounted on a drill jig or assembly fixture? Yes, the vertical-foot mounting is intended for installation on jigs and fixtures where a vertical clamping action is required; the compact Kukamet unit integrates easily into standard fixture plates. Is the surface treatment suitable for humid or corrosive workshop conditions? The clamp’s zinc-plated finish provides corrosion resistance appropriate for general workshop environments and helps extend service life compared with untreated steel. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp Vertical Base, 2,000 N Clamping Force, 3,370 N Holding Force, Blackened - Kukamet
The compact combination of high clamping capacity and a slim mounting footprint ensures dependable fixture performance; the 2000 N clamping force and 3,370 N holding force provide consistent workpiece security. Order directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Vertical clamp '252' (B252-4) by Kukamet — 2000 N clamping force, 90° mounting The Vertical clamp '252' (B252-4) is a lever-operated vertical foot clamp designed for 90° workholding in jigs, fixtures and assembly stations. 2000 N clamping force for secure fixing 3,370 N holding force under load Vertical foot mounting at 90° operation Black oxide finish resists wear Reliable force for repeatable clamping Designed for industrial workholding, the Vertical clamp '252' (B252-4) delivers a 2000 N clamping force with a rated 3,370 N holding capability, ensuring consistent part retention during machining, assembly or inspection processes. These numerical ratings describe the peak clamping pressure and the static holding resistance respectively; in practice, the values translate into fewer repositions, reduced scrap rates and steadier cycle times. The specification supports applications where repeatability and process stability are priorities, allowing engineers to factor measured forces into fixture design and risk assessments. Space-saving mounting that speeds up fixture layout The clamp's vertical foot mounting and fixed 90° operating angle make it suitable for compact tooling arrangements and multi-level fixture plates. With a mass of 0.71 kg, the component keeps dead weight low and simplifies handling during assembly of jigs. The vertical mounting foot aligns the clamping arm for perpendicular engagement, which reduces interference with adjacent tooling and allows closer part nesting on plates. For workshop planners this means more efficient use of fixture real estate and quicker cycle integration, while maintaining the mechanical stability required for repeat operations. Durable finish and straightforward lever action for daily use Surface protection is provided by a black oxide finish, offering corrosion resistance and a matt appearance that reduces glare in production environments. The lever clamp operation is deliberately simple: a mechanical toggle action converts manual input into reliable clamping force with minimal maintenance. The finish combined with the straightforward mechanism results in long service life under normal workshop conditions and helps keep downtime low. Where routine cleaning and lubrication are scheduled, the clamp will continue to perform without complex servicing or specialist tools. For dependable 90° workholding from Kukamet, contact Metav Werkzeuge in Emmerich for ordering details or application advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: B252-4 GTIN: 8680731508208 eClass: 21041717 ETIM: EC011973 Model: 252 Facts Max clamping force: 2000 N Max holding force: 3370 N Weight: 0.71 kg Operating angle: 90° Mounting type: vertical foot Special features Material / finish: black oxide finish Type: lever clamp Mounting: vertical foot Special features: none noted FAQ What is the maximum clamping force of this clamp? The clamp provides a maximum clamping force of 2000 N; the holding capacity is specified at 3,370 N for the Vertical clamp '252' (B252-4). Which mounting method is required for installation? Installation uses a vertical foot mounting with a fixed 90° operating angle, suitable for integration into jigs and fixtures that require perpendicular clamping. What material and finish does the clamp have? The unit is supplied with a black oxide finish, which improves corrosion resistance and wear behaviour while keeping the visible surface matt. Is this clamp suitable for machining and assembly fixtures? Yes. The combination of 2000 N clamping force and 3,370 N holding force makes it suitable for many machining and assembly applications where secure, repeatable workholding is required. How heavy is the clamp and does it affect fixture design? The clamp weighs 0.71 kg, which supports compact fixture layouts and minimises added mass on movable or lightweight fixture plates. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp With 1,400 N Push Force, 1,625 N Holding Force, Blackened Finish - Kukamet
Benefit from holding force 1,625 N, a 90° vertical mount and a compact, blackened finish for secure clamping in confined jigs and fixtures. Combine robust mechanical performance, low fixture weight and simple integration for uninterrupted production. Order the Vertical toggle clamp B252-3 directly via Metav Werkzeuge or ask our consultants if needed. Kukamet Vertical toggle clamp B252-3 – 90° vertical mounting, 1,625 N holding force The Vertical toggle clamp B252-3 is a lever-operated workholding device designed for vertical fixtures where reliable, repeatable retention is required in assembly, welding and machining operations. Vertical mount with 90° clamping angle Holding force 1,625 N for secure workholding Compact weight 0.27 kg for minimal fixture load Blackened finish for corrosion resistance Secure clamping that reduces rework and cycle times The clamp delivers a holding force of 1,625 N and a clamping force of 1,400 N, providing a measurable basis for fixture design and process reliability. These values translate directly into reduced part movement during operations, which helps lower scrap rates and minimise rework. The mechanism is a classic toggle clamp, which locks mechanically under load; this means the clamping action remains stable even during vibration-prone processes. For planners and production engineers, the documented forces enable straightforward calculation of safety margins and fixture requirements. Compact fixture design with easy vertical mounting With a mass of 0.27 kg and a vertical foot attachment, the component offers a very small footprint for space-constrained jigs. The compact design reduces inertial load on moving assemblies and simplifies multi-clamp layouts, enabling closer clamp spacing without compromising accessibility. Installation is designed to be systematic: the vertical mounting orientation secures parts from above and is particularly suited to operations where a perpendicular clamping force is advantageous. The small weight also contributes to faster handling during fixture assembly and easier logistics for modular tooling systems. Durable finish and consistent 90° positioning for long service life The item is supplied with a blackened finish, which provides basic surface protection and reduces glare in workshop lighting. The fixed 90° clamping angle ensures perpendicular retention and simplifies alignment checks during set-up. These characteristics together support consistent clamp positioning and extended service intervals. Where fidelity of repetitive positioning matters—such as in short-run assembly or precision welding—the combination of mechanical lock and protective surface reduces the likelihood of downtime due to surface wear or accidental slippage. Practical applications and integration into production workflows Engineered for jigs, welding fixtures, inspection stands and light machining fixtures, the clamp is suited to repetitive tasks where quick actuation and dependable retention are priorities. The mechanical locking principle shortens cycle times compared with manual fastening methods, and the measurable force data supports process validation and quality documentation. Integration into modular pallets and fixture plates is straightforward thanks to the vertical mounting arrangement, enabling rapid changeovers and consistent part location across production batches. For secure, space-efficient clamping choose the Kukamet vertical toggle clamp B252-3 — contact Metav Werkzeuge for procurement advice and technical clarification by e‑mail or telephone. Technical Data SKU: B252-3 GTIN: 8680731508185 Manufacturer: Kukamet Material: blackened finish Mounting: vertical foot Clamping angle: 90° Max clamping force: 1,400 N Max holding force: 1,625 N Weight: 0.27 kg ECLASS: 21041717 ETIM: EC011973 Core data Max clamping force: 1,400 N Max holding force: 1,625 N Weight: 0.27 kg Clamping angle: 90° Special features Blackened finish Vertical foot mounting Toggle clamp (lever clamp) No additional special features FAQ What types of fixtures suit this clamp? The clamp fits vertical jigs, welding fixtures and inspection pallets where perpendicular retention is required; the Vertical toggle clamp B252-3 integrates readily into modular fixture plates. How strong is the clamping action compared with holding force? The device provides a clamping force of 1,400 N and a holding force of 1,625 N, indicating a secure mechanical lock suitable for light to medium production loads. Which materials is the clamp appropriate for? The clamp is a general-purpose workholding device; use it for metal and fabricated components in assembly and light machining where the specified forces meet process requirements. How should the clamp be mounted? Mount on a prepared vertical plate using the vertical foot arrangement; ensure the fixture layout accommodates the 90° clamping angle for correct part engagement. Is any special maintenance required? Routine inspection and light lubrication of the pivot points is recommended to maintain reliable operation; the blackened finish provides basic corrosion protection but does not replace periodic checks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp With 470 N Thrust, 700 N Holding Force, Black Oxide Finish - Kukamet
Compact design, positive toggle action and a sturdy blackened finish combine to deliver secure, repeatable clamping in confined fixtures; the combination of 470 N clamping force and 700 N holding capacity ensures reliable part retention. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical toggle clamp 252 — Kukamet vertical lever clamp, 470 N, 90° The Vertical toggle clamp 252 is a vertical lever clamp designed for fixture and jig applications, offering a positive locking action at a 90° actuator angle for secure part retention in assembly and light machining tasks Vertical foot mounting for secure attachment 470 N maximum clamping force 700 N holding force for stable retention Blackened finish for surface protection Secure vertical clamping for production fixtures The Vertical toggle clamp 252 delivers a compact yet robust solution for repetitive fixture work. With a maximum clamping force of 470 N and a holding force of 700 N, the device secures components during machining and assembly; clamping force refers to the squeeze applied when the lever is engaged, while holding force describes the resistance to displacement once closed. The vertical lever action creates a positive lock that minimises movement under load and improves process reliability for jigs and small-batch production. Faster cycle times through simple lever operation A short stroke and a positive toggle mechanism enable rapid locking and release, reducing handling time and increasing throughput on both manual benches and semi-automated stations. The 90° actuator geometry keeps the operating lever clear of the workpiece while the low moving mass (0.065 kg) lowers inertia, aiding quick reciprocation and reducing wear on adjacent components. This combination of features supports consistent clamp engagement across repeated cycles, contributing to measurable efficiency gains in fixture operations. Durable finish and straightforward mounting for workshop rigs The clamp is finished in a blackened finish, which provides basic surface protection and a non-reflective appearance suited to industrial environments. Installation is via a vertical foot that simplifies attachment to fixture plates or tooling blocks and allows precise alignment at the required angle. As a compact lever clamp from Kukamet, it is intended for demanding, repetitive holding tasks where space, repeatability and dependable locking are decisive factors for process stability. For procurement and tailored technical advice on the Kukamet vertical toggle clamp 252, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com — our specialists can advise on fixture integration and delivery options. Technical data Article number: B252-2 GTIN: 8680731508161 Manufacturer: Kukamet Numbers / Core technical data Weight: 0.065 kg Max clamping force: 470 N Max holding force: 700 N Angle: 90° Special features Material: blackened finish Mounting: vertical foot Type: vertical toggle clamp FAQ What clamping and holding forces does the clamp provide? The Vertical toggle clamp 252 from Kukamet delivers up to 470 N clamping force and 700 N holding force, suitable for light to medium-duty fixture applications; SKU B252-2. How is the clamp mounted to a fixture? Mounting is via the vertical foot; the clamp aligns at a 90° orientation to the workpiece and is designed for attachment to fixture plates or tooling blocks. What does the blackened finish mean for workshop use? The blackened finish on the clamp offers basic surface protection against corrosion and a non-reflective appearance, making it suitable for industrial bench and jig environments. Is the clamp suitable for frequent automated cycles? The short stroke and toggle mechanism provide fast, repeatable action; the low weight (0.065 kg) reduces moving mass and supports frequent cycling with minimal inertia. Who supplies this clamp and what is the SKU? This clamp is supplied by Kukamet and is available via Metav Werkzeuge; product SKU is B252-2 and GTIN 8680731508161. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp With Safety Lock, 1.4 kN Thrust, Zinc Plated, 1.625 kN Holding Force - Kukamet
Take advantage of a compact, galvanised design paired with a reliable safety lock and measurable clamping performance — the result is steady, repeatable workholding for jigs and fixtures. Order the vertical clamp directly via Metav Werkzeuge or consult the product experts for integration advice. Vertical clamp 252 by Kukamet — galvanised, safety lock The Vertical clamp 252 is a compact, 90° toggle clamp engineered for secure vertical clamping in fixtures and jigs across production and workshop environments. Galvanised steel for corrosion resistance Integrated safety lock for secured clamping 90° orientation for vertical clamping operations Holding force up to 1,625 N Consistent clamping force for reliable machining The clamp delivers a defined clamping force of 1,400 N, which provides predictable holding performance in repeat operations. Measurable values such as the holding force of 1,625 N allow process planners to evaluate fixture safety margins and cycle stability. In practice, this means reduced repositioning, fewer interruptions during processing and a clear basis for fixture design decisions. The compact, low-mass construction contributes to agility in small assemblies while still supporting robust clamping behaviour. Built to last with low maintenance demands A galvanised finish offers effective corrosion protection, making the unit suitable for workshop environments where humidity or coolant exposure can occur. The device’s 0.27 kg mass and compact footprint facilitate integration into confined tooling layouts, and the vertical foot mounting ensures a firm anchoring point on plates or bases. These attributes combine to lower lifecycle maintenance needs and to keep downtimes to a minimum, supporting uninterrupted production sequences. Safe, ergonomic operation for repetitive tasks The built-in safety lock secures the clamp in the engaged position, preventing accidental release during handling or vibration-prone processes. The fixed 90° orientation is optimised for vertical clamping operations, enabling straightforward alignment of workpieces in vertical planes. Quick engagement and repeatable indexing reduce set-up time in jigs and fixtures, enhancing throughput without compromising operator safety or part integrity. Practical integration and quality assurance Supplied under Kukamet quality standards and bearing SKU 252-3-L, the clamp is suitable for standard fixture designs and straightforward to specify using the listed technical values. The construction and clearly stated forces support rational selection for tasks from light assembly to more demanding holding requirements. For buyers seeking a dependable component from a supplier with a European quality filter, Metav’s logistics and product range provide an easy path to procurement and inventory consolidation. Contact Metav Werkzeuge for technical matching and procurement assistance with the Kukamet vertical clamp 252 and ensure the component aligns with fixture specifications Technical data Article number: 252-3-L GTIN: 8680731504552 SKU: 252-3-L Facts Weight: 0.27 kg Clamping force (max): 1,400 N Holding force (max): 1,625 N Angle: 90° eClass: 21041717 ETIM: EC011973 Special features Material: galvanised Mounting: vertical foot Safety feature: integrated safety lock Brand: Kukamet FAQ What clamping force does the clamp provide? The clamp offers a clamping force of 1,400 N and a holding force up to 1,625 N, allowing clear specification for fixture load calculations. Is the surface treated for corrosion resistance? Yes, the component is galvanised, providing protection against corrosion in workshop conditions. Can the clamp be mounted on a plate or base? The clamp uses a vertical foot mounting which is suitable for secure attachment to plates and fixture bases. Is there a locking mechanism to prevent accidental opening? An integrated safety lock secures the clamp in the engaged position to prevent unintentional release. Which SKU identifies this model for ordering and documentation? The product is listed under SKU 252-3-L and GTIN 8680731504552 for procurement and inventory purposes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp With Safety Lock, 2 000 N Thrust, Zinc Plated, 3 370 N Holding Force - Kukamet
Benefit from a compact, galvanised vertical clamp with a secure safety lock and defined clamping and holding forces for reliable workholding; order the unit directly via Metav Werkzeuge or ask our consultants for application advice. Vertical toggle clamp 252-4-L — Kukamet vertical clamp, galvanised with safety lock, 2,000 N clamping force A Vertical toggle clamp 252-4-L engineered for vertical mounting and secure 90° clamping in fixtures, jigs and assembly benches Galvanised steel construction for corrosion resistance Safety lock for secure engagement Vertical base with 90° clamping orientation 2,000 N nominal clamping force Consistent, measurable clamping performance for repetitive production The device delivers a nominal clamping force of 2,000 N, complemented by a maximum holding force of 3,370 N, which together provide reproducible retention for repetitive tasks. The distinction between the clamping and holding values means the clamp applies the required compressive force while retaining components against lateral movement or vibration. Built around a lever mechanism, the unit enables rapid engagement and release, reducing cycle time in fixture operations and supporting efficient throughput in small-batch and light industrial production. Designed for durability and safe operation in workshop environments Constructed from galvanised steel, the clamp resists corrosion in typical workshop atmospheres, which extends service life and lowers maintenance frequency. The integrated safety lock prevents unintended opening during handling or machining, increasing operator confidence and process reliability. Its vertical foot mounting and fixed 90° angle make the component straightforward to fit to vertical plates or fixture frames, while the compact mass of 0.71 kg minimises added load on subframes and jigs. These attributes support long-term availability and predictable performance in daily use. Simple integration into jigs, benches and assembly stations The lever-style mechanism offers a familiar interface for fitters and fabricators, enabling fast retrofitting into existing workholding setups or new fixture designs. The clamp’s footprint and mounting orientation allow for space-efficient placement where right-angle retention is required. For further specification checks—for example, to confirm compatibility with a particular fixture plate or to discuss batch supply—the item is supplied via Metav Werkzeuge, a precision partner with comprehensive distribution and technical support, ensuring consistent availability from the Emmerich warehouse. For tailored advice on implementing the Kukamet Vertical toggle clamp 252-4-L in specific fixtures or to arrange supply from Metav Werkzeuge’s Emmerich facility, please get in touch with our consultants Technical data Article number: 252-4-L GTIN: 8680731504590 Manufacturer: Kukamet ETIM: EC011973 ECLASS: 21041717 Facts Clamping force (max): 2,000 N Holding force (max): 3,370 N Weight: 0.71 kg Angle: 90° Special features Galvanised steel Vertical foot mounting With safety lock Category: Clamps FAQ What clamping force can be expected from this clamp? The Kukamet Vertical toggle clamp 252-4-L provides a nominal clamping force of 2,000 N and a maximum holding force of 3,370 N for reliable retention during assembly and light machining tasks. How is the clamp mounted in a fixture? Mounting is by a vertical foot arrangement designed for attachment to vertical plates or frames; the clamp secures components at a fixed 90° orientation. Does the surface finish resist workshop corrosion? Yes, the clamp is galvanised, giving protection against corrosion and improving longevity in standard workshop environments. What safety features are included? A mechanical safety lock is integrated to prevent accidental release of the lever during operation or handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp With Safety Lock, 470 N Thrust, 700 N Hold Force, Zinc Plated - Kukamet
Take advantage of a corrosion‑resistant galvanised finish, an integrated safety lock and reliable clamping performance to keep fixtures secure and repeatable; order the Vertical Toggle Clamp 252 directly via Metav Werkzeuge or ask our consultants if needed. Vertical Toggle Clamp 252 — galvanised with safety lock (Kukamet) The Vertical Toggle Clamp 252 is a compact vertical clamp for secure fixture clamping at a 90° angle in production jigs and workshop assemblies Galvanised steel construction Integrated safety lock Vertical foot, 90° clamping angle Holding force up to 700 N Secure clamping with compact operation The clamp delivers controlled, repeatable holding thanks to a defined clamping force of 470 N paired with a higher holding force of 700 N, which secures parts during machining and assembly. Designed for compact fixtures, the device combines a small footprint with positive mechanical engagement, making it suitable where space is limited but consistent clamping is required. The safety lock prevents accidental release, supporting uninterrupted production flow and safer handling in repetitive applications. Durable construction for long service life Constructed with a galvanised finish, the unit resists corrosion in workshop environments and retains functional reliability over time. The lightweight yet robust design contributes to easy placement within modular jigs while reducing moving‑mass inertia during actuation. This balance of durability and low weight ensures the clamp remains dimensionally stable under regular load cycles, offering predictable behaviour for both manual and semi‑automatic fixtures. Fast integration into fixtures and jigs Fitted with a vertical foot and set for a 90° clamping angle, the toggle clamp is straightforward to mount on flat plates or locating blocks. Installation supports quick alignment and ensures repeatability when used in indexing fixtures or assembly stations. The compact mechanism permits direct use in small batches or series production, where secure, fast clamping improves throughput and reduces rework resulting from movement during processing. Contact Metav Werkzeuge for tailored advice on Kukamet's Vertical Toggle Clamp 252 and its integration into fixtures; reach our Emmerich team at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: 252-2-L GTIN: 8680731504514 SKU: 252-2-L Facts Weight: 0.065 kg Clamping force: 470 N Holding force: 700 N Clamping angle: 90° eClass: 21041717 ETIM: EC011973 Materials & features Galvanised finish Mounting: vertical foot Integrated safety lock Category: Spanner Manufacturer: Kukamet FAQ What clamping and holding forces does the clamp provide? The Vertical Toggle Clamp 252 offers a clamping force of 470 N and a holding force of 700 N, providing secure retention for typical workshop and fixture tasks. Is the clamp suitable for use in humid or corrosive workshop conditions? Yes, the galvanised finish on the Kukamet Vertical Toggle Clamp 252 enhances corrosion resistance for improved service life in standard workshop environments. How is the clamp mounted in a fixture? The clamp features a vertical foot for direct mounting on fixture plates or blocks and is set up for a 90° clamping orientation for straightforward integration. Does the device include a safety mechanism to prevent accidental release? An integrated safety lock is provided on the Kukamet Vertical Toggle Clamp 252 to secure the clamping position and reduce the risk of unintended opening during handling. Is the clamp appropriate for small, space‑constrained jigs? Yes, the compact dimensions and lightweight design of the 252 make it suitable for small jigs and modular fixture systems where space and repeatability are key. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp With Safety Lock, Horizontal Base, 2 000 N Thrust, 3 370 N Holding Force, Zinc-Plated - Kukamet
The combination of robust galvanised construction and a 2,000 N maximum clamping force ensures dependable performance in production fixtures; the integrated safety locking provides secure fixation for repetitive operations. Order the unit directly via Metav Werkzeuge or consult our advisors for application guidance. Kukamet 251 vertical clamp – galvanised construction, 2,000 N clamping force The 251 vertical clamp is a compact clamping device designed for secure 90° mounting in jigs and fixtures across workshop and industrial environments. Galvanised steel construction for corrosion resistance 2,000 N maximum clamping force Safety locking mechanism for secure fixation Horizontal foot for stable 90° mounting Consistent clamping power for repetitive production tasks A solid galvanised finish combines corrosion resistance with a low-maintenance surface suited to workshop environments where durability matters. The unit delivers a maximum clamping force of 2,000 N and a holding force of 3,370 N, values that translate into reliable workpiece retention during machining, assembly or inspection routines. Thanks to the right-angled mounting and horizontal foot, fixture design is simplified, reducing setup time while maintaining consistent force transmission for repeatable results. Safer, quicker operation with integrated locking and lever action The clamping device features a safety locking mechanism that secures the clamp once engaged, reducing the risk of accidental release during handling or vibration-prone processes. The lever clamp principle enables rapid engagement and disengagement, supporting efficient cycle times on production lines and in manual jig operations. At just 0.71 kg, the component is lightweight for ease of positioning without compromising the robustness expected from an industrial clamp. Designed for integration and long-term reliability Compact dimensions and a horizontal mounting base make this clamp straightforward to incorporate into bespoke fixtures or standard tooling plates. The galvanised surface protects against surface corrosion, extending service life and lowering maintenance intervention. Specifying a compact vertical clamping device such as this supports lean tooling strategies by reducing the need for frequent replacements and by providing a predictable mechanical interface for repeatable assembly or machining processes. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 251 vertical clamp into production fixtures and for reliable delivery from Emmerich. Technical data Article number: 251-4-L GTIN: 8680731504576 Brand: Kukamet Material: galvanised steel Weight: 0.71 kg Facts Maximum clamping force: 2,000 N Holding force: 3,370 N Angle: 90° Weight: 0.71 kg Design & features Horizontal foot mounting Safety locking mechanism Galvanised finish Category: clamp FAQ What is the maximum clamping force of this clamp? The Kukamet 251 vertical clamp provides a maximum clamping force of 2,000 N and a holding force of 3,370 N for secure fixation. Is the clamp suitable for repeated use in a production environment? Yes, the galvanised construction and safety locking mechanism make the 251 appropriate for repetitive production cycles and long-term use. How is the clamp mounted? Mounting is via a horizontal foot designed for 90° installation, enabling stable integration into jigs and fixture plates. What is the unit weight and does that affect handling? The clamp weighs 0.71 kg, which aids manual positioning and installation without sacrificing mechanical stability. Does the clamp include a locking feature for safety? A safety locking mechanism is integrated to secure the clamp in the engaged position and reduce the chance of accidental release during operation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Vertical Clamp With Safety Lock, Horizontal Base, 470 N Thrust, 700 N Hold, Zinc Plated - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines a safety lock, reliable holding capacity and a space-saving horizontal base for quick integration into fixtures. The product delivers 470 N clamping force and 700 N holding force, ensuring steady workpiece fixation — order via Metav Werkzeuge or consult our specialists for tailored selection. Vertikalspanner 251 — Vertical clamp with safety lock and horizontal base (Kukamet) A Vertikalspanner 251 is a vertical toggle clamp designed for secure workpiece fixation in jigs and fixtures where a 90° clamping action and compact mounting are required. Safety lock for secure positioning 700 N holding capacity for stable fixation Zinc-plated finish for corrosion resistance Horizontal base for straightforward mounting Reliable fixation thanks to an integrated safety lock The clamp features an integrated safety lock that prevents unintentional release during handling and machining. With a rated 470 N clamping force and 700 N holding force, the device offers a predictable and quantifiable grip suitable for repetitive tasks in production and assembly lines. The zinc-plated finish provides corrosion resistance, which maintains consistent performance over time and reduces maintenance intervals. This results in fewer interruptions during batch processing and a more dependable clamping routine in fixtures and jigs. Space-saving mounting and straightforward installation This vertical clamp has a horizontal base that simplifies attachment to plates, fixtures or modular locating systems, enabling quick retrofitting without major design changes. At approximately 0.065 kg, its compact construction allows multiple units to be deployed across a fixture plate without adding significant mass or obstructing access. The right-angle actuation at 90° ensures predictable motion paths and clearance, aiding tool access and reducing collision risk during automated handling or manual loading. Built for repeatable workflows and industrial use Designed for repetitive clamping operations, the component supports consistent cycle times and improved repeatability in production processes. Its robust holding values and corrosion-resistant surface make it suitable for general workshop environments and light industrial applications where reliable part securing is essential. Integration into existing jigs is eased by the standardised mounting footprint and toggle action, helping to standardise fixture design and reduce set-up time. For specific application advice or clarification of technical details, Metav’s consultants are available to provide informed guidance and selection support. Secure reliable clamping for your fixtures through Metav Werkzeuge — contact our technical team via info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored recommendations and availability. Technical data Article number: 251-2-L GTIN: 8680731504491 Manufacturer: Kukamet Facts Max clamping force: 470 N Max holding force: 700 N Angle: 90° Weight: 0.065 kg Special features Horizontal base mounting Safety locking mechanism Zinc-plated finish Brand: Kukamet FAQ How is the clamp mounted to a fixture? The Vertikalspanner 251 is mounted via its horizontal base; the base permits simple bolting to fixture plates and modular tooling systems. What holding capacity can be expected for small workpieces? The device provides a holding force of 700 N and a clamping force of 470 N, values specified for the Vertikalspanner 251 to ensure stable fixation in assembly and jig applications. Is the surface protected against corrosion? Yes, the clamp is zinc-plated, giving the unit improved resistance to corrosion suitable for typical workshop environments. Which applications suit this vertical toggle clamp best? The product is intended for jigs, fixtures and light production tasks where compact, repeatable vertical clamping and a safety lock are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fast, secure workpiece clamping with toggle clamps
Toggle clamps, also known as knee lever clamps or lever clamps, are mechanical clamping elements used to fix components quickly and reliably in fixture construction, assembly, welding and testing. Their kinematic knee lever principle provides a one-motion closure that locks beyond a mechanical dead centre, delivering consistent clamping force with minimal operator effort.
How the locking principle benefits production
The kinematic dead-centre action means the clamp self-locks once closed, so no continuous force is required on the handle and the workpiece remains form-stable even under process-induced vibration. That behaviour translates directly into higher process reliability and faster cycle times: operators close the clamp in one swift move, parts stay in position during machining or inspection, and changeover times are reduced.
Practical advantages for everyday workshop use
- Reduced set-up time through single-motion clamping
- Consistent repeatability and process stability under vibration
- High holding force with low operator effort thanks to the dead-centre mechanism
- Durable construction for long service life in repetitive production
- Versatile mounting options for vertical, horizontal, push‑rod and draw applications
Technical overview
- principle: kinematic knee lever (dead-centre) locking
- application areas: fixture construction, assembly, welding, testing
- design variants: vertical clamp, horizontal clamp, push-rod clamp, draw/closure clamp
- material: high-strength zinc-plated steel; stainless steel options
- handle: ergonomic, oil-resistant handles
- joints: wear-resistant joint bushes
- process suitability: holds under strong, process-induced vibration; enables high repeatability
Metav as your precision partner
Metav combines decades of specialist knowledge with a broad, dependable assortment for industry and trade. With more than 48,000 customers, a catalogue exceeding 250,000 products and a quality filter based in Emmerich, Metav offers a practical, low-risk route to robust toggle clamps and accessories—ideal for buyers who need dependable stock, expert selection and consistent product quality.
In short: toggle clamps (knee lever clamps / lever clamps) deliver rapid, repeatable clamping with minimal operator effort, making them a straightforward productivity upgrade for demanding production environments.
FAQ
What exactly is a toggle clamp and how does it lock?
A toggle clamp uses a kinematic knee lever that passes a mechanical dead centre during closure; once over‑centre, the clamp self-locks, maintaining clamping force without continuous pressure on the handle.
Which toggle clamp type should I choose for sheet assembly or for pulling covers together?
Use vertical or horizontal toggle clamps for holding sheets and assemblies; choose draw/closure clamps when axial pulling or form closing is required. The variety of toggle clamp designs matches different fixture geometries and force directions.
Are toggle clamps suitable for high-vibration processes?
Yes. The dead‑centre locking of toggle clamps secures the workpiece even under strong, process-induced vibration, ensuring positional stability during machining or testing.
What materials and handle options are available for toggle clamps?
Common materials: zinc-plated steel and stainless steel. Handles are typically ergonomic and oil-resistant; joints use wear-resistant bushes for extended service life.
Can Metav help specify the right toggle clamp for my application?
Metav supplies a wide selection of toggle clamps and technical information, enabling selection based on application, material and required holding force; the assortment is supported by decades of precision experience and a large customer base.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com