TCGT 110302 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and simple ISO compatibility for consistent production results. The uncoated cermet grade and triangular form help deliver superior surface quality in continuous turning operations. Order the TCGT 110302 NS9530 indexable insert directly via Metav Werkzeuge or ask the consultants for application advice. TCGT 110302 NS9530 indexable turning insert, finishing grade for steel — Tungaloy The TCGT 110302 NS9530 is an ISO-standard triangular turning insert developed for finishing steel components, offering a sharp cutting edge and stable chip control for continuous cuts and small depths of cut. Sharp uncoated cermet grade NS9530 For precision finishing of steel Triangular ISO plate, 3.18 mm thick 7° relief angle with cylindrical hole Achieve consistent finish with low cutting forces The TCGT110302 NS9530 insert is engineered as a finishing solution: its uncoated cermet composition (grade NS9530) provides a sharp cutting edge that reduces friction and promotes low cutting forces, which in turn lowers vibration and improves tool life. For operations requiring excellent surface integrity, the combination of fine edge geometry and the small 0.2 mm corner radius is particularly effective; operators benefit from fewer rework steps and more predictable part quality. The result is a measurable improvement in surface roughness when turning continuous-pass components. Reliable clamping and ISO conformity for process security Compatibility with the toolholder depends on form, relief angle, tolerance class, clamping method, size and thickness; this indexable plate conforms to ISO standards to ensure repeatable seating and secure fastening. The triangular insert and its cylindrical hole with single-sided countersink (40°–60°) allow positive location and reliable torque transfer through the clamping system. The defined 7° relief angle and the 60° included angle provide a stable cutting geometry that keeps forces predictable in mass production, supporting cycle-time optimisation and consistent component tolerances. Practical applications and machinability advantages Designed primarily for turning, the insert excels in continuous cuts and small depth-of-cut finishing passes on steel, delivering a fine surface without aggressive cutting parameters. The single-sided chipbreaker geometry channels chips effectively for finishing conditions, while the cemented carbide backing gives the insert sufficient toughness for stable machining. Where process reproducibility and part-to-part consistency are critical, this grade helps reduce scrap rates and improves downstream assembly fit. The plate’s ISO format supports straightforward replacement and inventory control across multi-machine shops. For application-specific consultation or to request a supply of Tungaloy finishing inserts, contact Metav Werkzeuge for tailored recommendations and fast processing: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6723912 Manufacturer SKU: TUN6723912 Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Product designation: TCGT110302 NS9530 Core characteristics Size: 11 mm Thickness: 3.18 mm Corner radius: 0.2 mm Relief angle: 7° Insert angle: 60° Hole: cylindrical + single-sided countersink (40°–60°) Applications & special features Material: cemented carbide body Grade/coating: uncoated cermet NS9530 Intended use: Turning — finishing for steel Chip control: single-sided chipbreaker Form: triangular ISO insert Compatibility: ISO-standard holders (form, relief angle, tolerance, clamping, size, thickness) FAQ What materials is this insert designed for? The insert is specified as a finishing grade for steel; the NS9530 uncoated cermet focuses on low cutting forces and excellent surface finish when turning steel parts. Which holder features are required for correct compatibility? Compatibility is determined by holder form, relief angle, tolerance class, clamping method, size and thickness; the ISO-standard triangular format and the cylindrical hole with countersink ensure secure seating in compatible toolholders. Can this insert be used for roughing operations? This grade is optimised for finishing and small depths of cut; while the cemented carbide body offers toughness, the sharp cermet edge is best suited to precision finishing rather than heavy roughing. What are the key geometric data to check before fitting? Relevant values include the 11 mm size, 3.18 mm thickness, 0.2 mm corner radius, 7° relief angle and 60° insert angle—verify these match the holder specifications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110302 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing-grade insert that combines a sharp cermet cutting edge, precise geometry and ISO compatibility to maintain steady throughput and excellent surface quality; order directly via Metav Werkzeuge or ask the consultants for matching holders and clamping kits. TCGT110302 NS9530 — Tungaloy ISO turning insert, triangular 11 mm, 7° clearance The TCGT110302 NS9530 is an ISO‑standard triangular turning insert designed for finishing operations on steel, optimised for continuous cuts and small depths of cut Sharp cermet grade for fine finishing Triangular insert, 11 mm cutting size 0.2 mm corner radius for precise profiling 7° clearance for smooth shearing Superior finishing performance for steel production chains The insert is manufactured in a finishing cermet grade that focuses on delivering a consistently high surface finish and low cutting forces during continuous cutting operations. The uncoated NS9530 composition provides a razor‑sharp cutting edge that reduces built‑up edge and improves dimensional repeatability, which in turn cuts downstream rework and inspection time. As a result, production runs that demand tight tolerance faces and low vibration benefit from more predictable cycle times and fewer rejected parts. Clear compatibility and safe clamping for reliable operation Compatibility with the clamping system is defined by form, relief angle, tolerance class, fastening style, size and thickness; the ISO‑normed geometry of this triangular insert simplifies selection for standard external and internal turning toolholders. The insert features a cylindrical hole with a single‑side countersink (40°–60°) and a thickness of 3.18 mm, enabling secure attachment with common clamping kits and replacement screws. The ISO system approach reduces setup errors and shortens tool changeovers, supporting uninterrupted machining cycles. Carbide substrate and cermet cutting grade explained Built on a robust carbide substrate with an uncoated cermet working edge, this insert combines the toughness of carbide with the wear resistance and edge stability of cermet materials. The result is lower flank wear in finishing cuts and a clean part surface without excessive burr formation. The 0.2 mm corner radius and the 60° triangular geometry help maintain cutting stability while permitting precise profiling and light finishing passes. For operations where surface integrity and tight tolerances matter, the material and geometry choices deliver measurable improvements in part quality. For precision finishing with Tungaloy, contact Metav Werkzeuge for tailored holder advice and to order the TCGT110302 NS9530 insert — eMail: info@metav-werkzeuge.com or Phone: +49 2822 7131930 Technical data Article number: 6723911 Manufacturer SKU: TUN6723911 Model series: ISO‑Drehwendeschneidplatten Designation: TCGT110302 NS9530 Tungaloy‑Wendeplatte Facts Insert size: 11 mm Thickness: 3.18 mm Included angle: 60° Corner radius: 0.2 mm Clearance (relief) angle: 7° Manufacturer article number: 6723911 Special features Shape: triangular Hole: with hole — cylindrical hole + one‑side countersink (40°–60°) Cutting material: uncoated cermet (NS9530) Substrate: carbide Application: turning (external and internal), finishing Chipbreaker: one‑sided System components: compatible with ISO holders, appropriate outer holder or boring bar, underlay/clamping set and replacement screws FAQ What materials is this insert intended for? The TCGT110302 NS9530 insert is a finishing grade intended primarily for steel; the uncoated cermet composition is optimised to produce low cutting forces and excellent surface quality on continuous cuts in steel. How does the insert mount in standard toolholders? Mounting requires a compatible ISO‑standard triangular pocket and the correct clamping kit; the TCGT110302 uses a cylindrical hole with a one‑side countersink (40°–60°) to allow secure fastening with common screws and underlay plates. What does the 0.2 mm corner radius mean for workpiece results? A 0.2 mm corner radius on the TCGT110302 NS9530 provides a balance between sharp profile detail and edge strength, enabling fine finishing passes while maintaining stability at small depths of cut. Is this insert suitable for interrupted cuts or only continuous finishing? The NS9530 grade is optimised for continuous cutting and small depths of cut for best surface finish; for heavily interrupted cuts, a different grade or geometry may be more suitable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110302 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH7025 for stable cutting, the 60° triangular geometry for efficient material removal and the ISO compatibility that simplifies toolholding; order the insert directly via Metav Werkzeuge or consult the Metav team for application advice. TCGT 110302 SH7025 triangular turning insert — Tungaloy, ISO turning application TCGT 110302 SH7025 is a coated carbide ISO turning insert designed for external and internal turning in standard ISO holders Coated carbide grade SH7025 for stable cutting ISO triangular form with 60° cutting angle 0.2 mm corner radius for fine chamfering Cylindrical hole with single-sided countersink High-performance grade for consistent machining results The insert uses the SH7025 coating and a coated carbide substrate to deliver a balance of toughness and edge stability under varying cutting conditions. The composition of the grade is geared towards applications where small tools or fluctuating engagement demand a resilient cutting edge. With a one-sided chipbreaker integrated on the rake face, chip formation is controlled to reduce re-cutting and cycle variability. The wafer-thin coating improves wear resistance while the substrate maintains fracture toughness, resulting in repeatable cutting performance and extended tool life in series production. Geometry that reduces setup time and increases productivity The triangular geometry with a 60° included angle provides three indexable cutting edges per insert, maximising effective tool life and lowering tooling cost per edge. A 0.2 mm corner radius yields a precise edge for fine finishing without compromising strength, while the 3.18 mm plate thickness adds rigidity for stable cutting under typical turning forces. The cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping and accurate seat location in compatible holders; this ISO compliance simplifies tool changeover and reduces alignment effort at the machine. Application guidance and system compatibility This insert is part of the ISO turning insert series and is intended for general-purpose external and internal turning; selection of the appropriate chipbreaker and grade should follow the workpiece material and machining conditions. The product's compatibility with a given holder depends on form, relief angle, tolerance class, fastening method, size and thickness — all standard criteria for ISO tooling systems. For operations with variable engagement or smaller tools, the SH7025 grade is particularly suited thanks to its edge stability and chip control, supporting predictable machining outcomes across batch work and mixed-production environments. For consistent results with the Tungaloy SH7025 grade, contact Metav Werkzeuge for tailored technical advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge can advise on holder compatibility and optimal chipbreaker selection. Technical data Manufacturer article number: 6967554 SKU: 6967554-Tungaloy Manufacturer SKU: TUN6967554 Model series: ISO-Drehwendeschneidplatten Name (without grade): TCGT110302 Label: TCGT110302 SH7025 Tungaloy-Wendeplatte Material: carbide Facts Cutting angle: 60° Relief angle: 7° Corner radius: 0.2 mm Plate thickness: 3.18 mm Inscribed circle / size: 11 mm Special features Coating / grade: SH7025 Coated carbide substrate One-sided chipbreaker Cylindrical hole + single-sided countersink (40°–60°) ISO-compliant triangular insert for turning Application: external and internal turning FAQ What holder types are compatible with this insert? Compatibility is determined by the ISO form, relief angle, tolerance class, fastening method, size and thickness; the TCGT 110302 SH7025 insert fits standard ISO triangular holders that accept TCGT 110302 geometry. Which machining tasks suit this SH7025 grade best? The SH7025 grade is designed for turning tasks that demand edge stability under variable engagement—especially suited to smaller tools and operations where robust chip control is required. How many usable cutting edges does the triangular insert provide? A triangular insert of this geometry offers three indexable cutting edges, enabling multiple re-uses before replacement and lowering cost per edge. Does the insert include a chipbreaker and what is its function? Yes; the insert features a one-sided chipbreaker to aid consistent chip formation and evacuation, reducing the risk of re-cutting and improving surface finish. What measurements are critical when checking fit in a toolholder? Critical measurements include the insert designation (TCGT110302), relief angle (7°), plate thickness (3.18 mm), inscribed circle/size (11 mm) and the hole/countersink specification for clamping accuracy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110302 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of coated carbide SH7025 for stable cutting edges, the ISO-standard 60° triangular geometry for broad holder compatibility, and the compact 0.2 mm corner radius for precise turning results — order original Tungaloy inserts directly via Metav Werkzeuge or ask our consultants for application support. TCGT 110302 SH7025 Tungaloy turning insert — triangular 60° 0.2 mm radius The TCGT 110302 SH7025 is an ISO-standard triangular turning insert designed for external and internal turning where edge stability and repeatable process behaviour are required. ISO triangular insert 60° geometry Coated carbide grade SH7025 for stability 0.2 mm corner radius for precision Cylindrical hole with single-sided countersink High‑productivity geometry and measurable performance The triangular 60° geometry of this ISO‑standard insert delivers a familiar seating angle that suits a wide range of toolholders, ensuring straightforward interchangeability and predictable cutting forces. The combination of a 3.18 mm plate thickness and 11 mm inscribed circle provides a compact, rigid platform that helps maintain stable chip formation during turning. These measurable characteristics make the insert a pragmatic choice for workshops that require consistent cycle times and reproducible results from batch to batch. Coating and grade engineered for edge stability The SH7025 designation identifies a coated carbide grade engineered for edge robustness, particularly effective when engagement conditions vary or smaller tools are used. Coatings reduce flank wear and help preserve sharpness under intermittent cuts; the net result is extended tool life and fewer indexings per workpiece. For users assessing process economics, the improved durability of this grade frequently translates into lower tooling costs per component and more time available for productive machining rather than tool changes. Practical mounting and system compatibility Mounting is facilitated by the cylindrical hole with a single-sided countersink (40°–60°) which secures the insert reliably in the seat while enabling correct clamping torque. Compatibility with a chosen holder is determined by shape, relief angle, tolerance class, fastening method, size and thickness; confirmation of these parameters with the holder manufacturer ensures correct seating and repeatable positioning. The insert’s 7° relief angle and compact geometry help to reduce unwanted rubbing and improve surface finishes in typical external and internal turning operations. Select the right chipbreaker and integrate into the machining system This insert is supplied with a one-sided chipbreaker, and selecting the correct chipbreaker and clamping system for the workpiece material and machining strategy is essential. The insert integrates into a system comprising an ISO turning insert, a compatible external holder or boring bar, a locator pad or clamp set and replacement screws. When paired correctly, the system promotes efficient chip control and predictable tool life, supporting both serial production and flexible jobbing environments. Contact Metav Werkzeuge for original Tungaloy TCGT 110302 SH7025 inserts and expert assistance in selecting the correct chipbreaker and holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application requirements and availability. Technical data Article number: 6967551 Manufacturer SKU: TUN6967551 Brand: Tungaloy Numbers / core technical data Geometry angle: 60° Corner radius: 0.2 mm Plate thickness: 3.18 mm Inscribed circle (size): 11 mm Relief angle: 7° Designs / special features Coated carbide grade SH7025 Triangular plate form One-sided chipbreaker Cylindrical hole with single-sided countersink (40°–60°) ISO-standard turning insert for external and internal turning FAQ Which machining operations suit this insert? This insert is designed for external and internal turning applications; the TCGT 110302 SH7025 performs best where a compact triangular insert and a 0.2 mm corner radius match the required geometry. What does the SH7025 grade offer? The SH7025 grade is a coated carbide formulation aimed at edge stability and wear resistance, particularly useful for varying engagement conditions and smaller tooling systems. How is the insert secured in the holder? Retention uses a cylindrical hole with a single-sided countersink (40°–60°); correct clamping and matching the holder’s tolerance and fastening method are essential for repeatable positioning of the TCGT 110302 insert. Can this insert be used in different holders? Yes — compatibility depends on the holder’s form, relief angle, tolerance class, size and thickness. Confirm these parameters before integrating the insert into a new clamping system. What is the manufacturer and article reference? The item is an original Tungaloy turning insert, article number 6967551, manufacturer SKU TUN6967551. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110302 SH725 Wendeplatten - Tungaloy
Benefit from the combination of durable SH725 coated carbide, ISO‑compliant triangular geometry and a precise 0.2 mm corner radius for steady turning results; order directly via Metav Werkzeuge or consult our specialists for application advice. TCGT 110302 SH725 triangular turning insert for Drehen by Tungaloy The TCGT110302 SH725 is an ISO‑standard triangular indexable insert designed for external and internal turning, offering a robust coated carbide grade for stable cutting edges and versatile workpiece compatibility. Coated carbide grade SH725 for durable edges Triangular ISO insert, size 11, radius 0.2 mm 7° clearance angle for reliable cutting engagement Central hole with cylindrical bore and 40°–60° countersink Single-sided chipbreaker for controlled chips Consistent cutting performance for reliable turning The indexable insert combines the SH725 coated carbide with a geometry tuned for steady behaviour under varying engagement conditions. The coated carbide provides wear resistance and edge stability, which reduces the frequency of index changes and supports longer uninterrupted cycles. For smaller toolholders or operations with fluctuating depth of cut, this grade is formulated to maintain a consistent cutting edge, resulting in predictable component tolerances and fewer rejects. The technical choice of the coating and substrate therefore translates directly into reduced setup time and improved throughput for batch and single‑part production. Engineered geometry for precise chip control and surface finish A triangular plate with an effective corner radius of 0.2 mm and a single-sided chipbreaker offers a balance between edge strength and surface quality. The chipbreaker controls swarf formation and evacuation, which helps prevent workpiece damage and tool clogging during turning cycles. The insert thickness of 3.18 mm and the central fixing with a cylindrical bore plus single‑side countersink (40°–60°) ensure secure clamping and repeatable seating in compatible housings. The modest radius supports fine finishing passes while the plate form gives three indexable edges, improving economy per insert. ISO‑compliant form for straightforward integration into tool systems Supplied as part of the ISO turning indexable insert family, the geometry and tolerance pattern are matched to standard holders; compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness. The specified 7° clearance angle and the 60° included angle of the triangular shape make it suitable for many common external and internal turning toolholders. This standardisation simplifies tool planning and spare part management: maintenance teams can stock a familiar insert format and expect consistent seating and performance across compliant holders. Productivity benefits and application guidance for workshops For turning applications where process stability and predictable tool life are priorities, the insert’s combination of grade and geometry delivers operational advantages: fewer interruptions for indexing, controlled chip flow and a durable edge for mixed material batches. The insert is suitable for a wide range of turning tasks; select the chipbreaker and grade to match the workpiece material and machining conditions. If uncertain about the optimal holder match or cutting data for a specific component, the product documentation and technical advisors can support parameter selection to maximise tool life and part quality. For reliable machining performance with the TCGT110302 SH725 insert, contact Metav Werkzeuge for customised recommendations and cutting data at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737036 SKU: 6737036-Tungaloy Manufacturer SKU: TUN6737036 Facts Corner radius: 0.2 mm Clearance angle: 7° Included angle: 60° Plate size: 11 mm Thickness: 3.18 mm Special features Material: carbide Coating / grade: SH725 Plate form: triangular Hole: with cylindrical bore and single‑side countersink (40°–60°) Chipbreaker: single‑sided Application: turning (Drehen) Model series: ISO turning indexable inserts FAQ What materials is this insert suited for? The TCGT110302 SH725 insert is designed as a versatile turning grade; the SH725 coating and carbide substrate support a broad range of materials when the correct chipbreaker and cutting data are selected. How many usable edges does the triangular insert offer? A triangular indexable insert typically provides three cutting edges; the TCGT110302 geometry allows rotation to a fresh edge, optimising economy per insert. What fixing method does the insert use? The plate is secured via a central hole with a cylindrical bore and a single‑side countersink (40°–60°), ensuring consistent clamping in compatible holders. Can this insert be used for internal as well as external turning? Yes, the ISO‑standard triangular form and the 7° clearance angle make the TCGT110302 suitable for both external and internal turning operations when paired with the correct holder. Which grade should be chosen for variable cutting conditions? The SH725 grade is a tough, edge‑stable coated carbide intended for applications with changing engagement or smaller tooling; it is chosen to maintain consistent edge life under such conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110302 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of SH725 coated carbide for stable cutting and the 60° ISO triangular geometry for precise clamping; order the TCGT110302 SH725 insert directly via Metav Werkzeuge or consult our specialists for application-specific guidance. TCGT 110302 SH725 Tungaloy indexable turning insert — 60° triangle, coated carbide TCGT110302 SH725 is an ISO 60° triangular indexable insert designed for external and internal turning, offering a robust, edge-stable grade for variable engagement conditions. ISO TCGT geometry 60° triangle SH725 coated carbide grade 0.2 mm corner radius for precision Cylindrical hole with 40°–60° countersink Stable cutting performance for varying engagement The SH725 grade is a coated carbide designed for edge stability and consistent performance when cutting under fluctuating conditions, particularly with smaller tools or changing depths of cut. The single-sided chipbreaker promotes predictable chip formation, reducing the risk of built-up edge and improving process reliability. For manufacturers seeking reproducible results, the combination of a wear-resistant coating and a formulation optimised for stability means fewer unplanned tool changes and enhanced uptime. Precision fit and repeatability with ISO geometry Manufactured to the ISO standard, the triangular 60° form ensures compatibility with a wide range of holders when the correct geometry, 7° clearance, tolerance class, clamping method, size and thickness are matched. The insert’s 11 size and 3.18 mm thickness provide a stable seat in standard toolholders, while the presence of a cylindrical hole with a one-sided countersink (40°–60°) secures reproducible clamping. This geometry supports accurate repositioning and repeatable indexing, which is essential for batch production and quality-controlled turning operations. Practical selection and application advice When selecting an insert for a given task, combine the SH725 grade with a chipbreaker and toolholder suited to the workpiece material and machining stability. The 0.2 mm corner radius is appropriate for finishing and light profile work where fine surface quality is required. The single-sided chipbreaker offers versatility across many turning scenarios; however, match the chipforming geometry to feed and cutting direction for optimum performance. The insert’s form factor makes it suitable for both external and internal turning operations in conventional turning centres. Handling, storage and process benefits Using coated carbide indexable inserts simplifies inventory and maintenance: replace worn edges quickly without regrinding, and keep production flowing with standardised inserts. The triangular 60° design allows three indexing positions per insert, improving cost-efficiency in long runs. For workshop implementation, ensure correct torque and clean seating surfaces to avoid misalignment. For complex or high-mix machining tasks, a short consultation helps align grade, chipbreaker and holder choice to process requirements and tool life targets. For tailored recommendations on the TCGT110302 SH725 insert from Tungaloy and to confirm suitability for specific turning tasks, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for application-focused advice and availability Technical Data Article number: 6737035 SKU: 6737035-Tungaloy Manufacturer SKU: TUN6737035 Designation: TCGT110302 SH725 Material: Coated carbide Model series: ISO indexable turning inserts Core specifications Insert size: 11 Thickness: 3.18 mm Corner radius: 0.2 mm Clearance angle: 7° Insert angle: 60° Special features Grade: SH725 Single-sided chipbreaker Triangular 60° shape Cylindrical hole with one-sided countersink (40°–60°) ISO indexable turning insert Suitable for external and internal turning FAQ What applications is this insert intended for? The TCGT110302 SH725 insert from Tungaloy is intended for external and internal turning where a stable, edge-resistant grade and a 60° triangular form are required. How does the SH725 grade affect tool life? The SH725 coated carbide grade provides improved edge stability under variable engagement, which helps to maintain a consistent cutting edge and can extend usable tool life in many turning operations. Which holder characteristics must be matched for correct fit? Compatibility requires matching the insert form, 7° clearance, tolerance class, clamping style, 11 size and 3.18 mm thickness of the insert to the toolholder to ensure reliable clamping and repeatable indexing. What does the single-sided chipbreaker mean in practice? A single-sided chipbreaker controls chip formation on the active cutting edge, promoting predictable chips and reduced risk of built-up edge; this is particularly useful when feed and depth vary during machining. Can the insert be used for finishing operations? Yes—the 0.2 mm corner radius is suitable for finishing and light profile work where fine surface quality is a priority; pairing the radius with appropriate feeds and speeds will improve surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110302 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard compatibility, a sharp TH10 uncoated carbide grade and compact geometry for efficient turning operations; order the insert directly via Metav Werkzeuge or consult our experts for holder compatibility and application advice. TCGT110302 TH10 Tungaloy indexable insert — ISO triangular insert for turning The TCGT110302 TH10 is an ISO-standard triangular indexable insert designed for precision external and internal turning, offering a sharp uncoated carbide grade optimised for non-ferrous materials. ISO triangular insert for standard holders Sharp TH10 uncoated carbide grade Low cutting forces, clean surface finish 7° relief and 0.2 mm corner radius Seamless ISO integration reduces setup time and uncertainty The ISO-standard triangular geometry ensures repeatable location and secure clamping in compatible holders, which reduces setup time and minimises indexing errors. Compatibility depends on form, 7° relief, tolerance class, attachment method, size and thickness; these parameters provide predictable positioning for both external and internal turning operations. Using a standardised insert simplifies tool management and reduces downtime during changeovers. Improved cutting performance for non‑ferrous and delicate turning The TH10 is an uncoated carbide grade developed as a sharp universal option for non‑ferrous materials where low cutting forces and a clean surface finish are essential. A sharp cutting edge helps to reduce burr formation and minimise workpiece heating, which in turn supports tighter dimensional control on softer alloys. This makes the insert particularly suitable where surface integrity and minimal secondary finishing are priorities. Stable chip control and repeatable results from robust geometry A one-sided chipbreaker combined with the 0.2 mm corner radius and a 60° triangular form promotes stable chip formation and consistent cutting behaviour. The insert is supplied with a hole and a cylindrical hole plus single‑sided countersink (40°–60°) for reliable clamping with standard screws and shims. The 3.18 mm plate thickness and 11 mm size deliver sufficient rigidity for routine turning while keeping the insert compact for tight setups. Practical system setup and selection guidance for production The insert forms part of a complete turning system: an ISO insert, a matching outer holder or boring bar, a shim/clamping set and replacement screws. Select the chipbreaker and the TH10 grade according to workpiece material, machining method and required stability to achieve the best economy and surface quality. For mixed production environments the universal nature of this insert simplifies inventory and supports consistent cycle times. Contact Metav Werkzeuge for expert guidance on selecting the Tungaloy TH10 indexable insert and to confirm holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6807700 SKU: 6807700-Tungaloy Manufacturer SKU: TUN6807700 Model series: ISO turning indexable inserts Designation: TCGT110302 TH10 Facts Insert size: 11 mm Plate thickness: 3.18 mm Corner radius: 0.2 mm Relief angle: 7° Insert angle: 60° Countersink angle: 40°–60° Special features Uncoated carbide grade TH10 Triangular plate form One-sided chipbreaker With hole; cylindrical hole + single-sided countersink Suitable for external and internal turning FAQ What materials is this insert best suited for? The TCGT110302 TH10 insert is optimised for non‑ferrous materials and applications where a sharp uncoated carbide grade provides low cutting forces and a clean surface finish. Does this insert require a specific holder type? Clamping compatibility is determined by the insert form, relief angle, tolerance class, fastening method, size and thickness; the TCGT110302 is intended for ISO‑standard external holders and boring bars that accept triangular inserts. What are the key dimensions to check before ordering? Confirm the 11 mm size, 3.18 mm thickness and 0.2 mm corner radius when selecting the insert; these dimensions affect seat fit and cutting geometry for the TCGT110302. Is the cutting edge coated? The TH10 grade is supplied as an uncoated carbide; its sharp edge supports low cutting forces and improved surface quality on appropriate materials. How does the hole and countersink affect clamping? The cylindrical hole with a single‑sided countersink (40°–60°) on the TCGT110302 provides secure screw seating and reliable repeatability when used with the correct clamping set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110302 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of low cutting forces, clean surface finish, and straightforward compatibility with ISO toolholders to maintain steady turning productivity; order the inserts directly via Metav Werkzeuge or contact the consultants for application advice. TCGT 110302 TH10 Tungaloy indexable insert for turning, triangular 60° TCGT110302 TH10 Tungaloy-wendeplatte is an ISO‑standard indexable insert designed for external and internal turning applications where a sharp, uncoated edge improves finish and reduces cutting forces ISO‑standard triangular insert for secure fitting Uncoated cemented carbide for low cutting forces Sharp TH10 grade for non‑ferrous materials 0.2 mm corner radius for fine finishing Precision seat and universal ISO fit for consistent tool clamping The ISO‑standard geometry ensures reliable fitment across matching holders; the triangular 60° shape and cylindrical hole with countersink (one‑side, 40°–60°) give a consistent locating and clamping condition that supports repeatable setups. With an 11 mm inscribed circle and 3.18 mm thickness, the insert is dimensioned to match widely available external holders and boring bars. This mechanical predictability reduces setup time and contributes to a stable machining process, especially in production runs where reproducible clamping and seating are essential. Sharp uncoated edge for low forces and superior surface quality The uncoated cemented carbide composition combined with the TH10 grade offers a sharp cutting edge that lowers cutting forces and promotes a clean surface finish when machining non‑ferrous metals and soft alloys. The single‑sided chipbreaker supports controlled chip formation in these materials, improving process reliability and part quality. Choosing this combination of edge geometry and grade can increase feed rates or reduce cutting power requirements, delivering a measurable improvement in throughput for sensitive turning tasks. Small radius and relief angle for fine finishing and flexible use A 0.2 mm corner radius provides a balance between edge strength and fine finishing capability, allowing for delicate profile work and short‑run finishing without excessive tool marks. The 7° relief angle lowers contact on the flank and helps prevent rubbing when cutting thin sections or near‑finish passes. As part of a system consisting of the insert, an appropriate holder, clamping set and replacement screws, this design supports flexible adaptation to different turning tasks while retaining the benefits of a standardised insert system. Contact Metav Werkzeuge for availability, technical advice and recommended holders for the Tungaloy TH10 insert at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6807697 SKU: 6807697-Tungaloy Manufacturer SKU: TUN6807697 Brand: Tungaloy Facts Included angle: 60° Corner radius: 0.2 mm Relief angle: 7° Thickness: 3.18 mm Inscribed circle: 11 mm Special features Material: cemented carbide Grade/coating: TH10, uncoated Shape: triangular Chipbreaker: one‑sided Hole: cylindrical hole + one‑side countersink (40°–60°) Typical application: turning Model series: ISO turning indexable inserts FAQ What materials is this insert best suited for? The TCGT110302 TH10 Tungaloy indexable insert is specified for non‑ferrous metals and similar applications where a sharp, uncoated edge reduces cutting forces and improves surface finish. How is the insert secured in the holder? The insert features a cylindrical hole with a one‑side countersink (40°–60°) for standard screw clamping; compatibility depends on holder form, clearance angle, tolerance class, fastening and plate dimensions. Can this insert be used for both external and internal turning? Yes, the triangular geometry and dimensions allow use in compatible external holders and boring bars for both external and internal turning operations. What advantage does the TH10 grade provide? The TH10 grade offers a sharp, universal cutting edge suited to non‑ferrous materials, supporting low cutting forces and cleaner surface results compared with many coated or tougher grades. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 160608 AH120 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH120, a secure clamping hole and precise 60° geometry to achieve consistent process security and long tool life; order original Tungaloy inserts via Metav Werkzeuge or consult our specialists for application support. TCGT160608 AH120 – Tungaloy triangular indexable milling insert, PVD-coated carbide, 60° The TCGT160608 AH120 is a triangular indexable insert for milling, designed for face, shoulder, slot, high-feed and contour milling within compatible Tungaloy milling systems. PVD-coated carbide AH120 for wear resistance Triangular 60° insert with 0.8 mm nose radius Cylindrical hole with 40°–60° countersink One-sided chipbreaker for controlled chips Increased process security and predictable tool life The PVD-coated AH120 grade provides a wear- and fracture-resistant cutting edge that stabilises machining results under varying conditions. As a result, cycle times become more reliable and the need for unscheduled tool changes is reduced. The combination of a hard substrate and PVD surface improves adhesion resistance at elevated temperatures, so cutting-edge integrity is maintained during extended milling operations. This leads to consistent part quality and reduced downtime. Geometry engineered for precision and repeatability With a triangular form and a 60° approach angle, the insert delivers stable engagement and flexible cutting positions. The 0.8 mm nose radius supports accurate surface profiling while balancing strength at the corner, reducing the risk of chipping in interrupted cuts. The nominal plate thickness of 6.35 mm and a secure clamping interface via the central hole ensure repeatable seating and concentricity in the tool body, which directly benefits dimensional accuracy and minimises rework. Controlled chips and improved surface finish The insert’s one-sided chipbreaker is tailored for efficient chip formation and evacuation during typical milling feeds. Controlled chip flow reduces the likelihood of recutting and protects both the workpiece and the tool from thermal and mechanical damage. The result is a consistently better surface finish and fewer secondary operations, which supports higher productivity and lower overall process costs. System compatibility and recommended applications This insert is intended for use within Tungaloy milling systems where seat geometry and clamping match the insert design. Typical applications include face milling, shoulder milling, slotting, high-feed and contouring, depending on the chosen milling body. The central cylindrical hole with a single-sided countersink (40°–60°) facilitates secure fastening and precise positioning. Always ensure the insert designation and cutter body are technically compatible before assembly to guarantee safe and repeatable performance. For reliable milling results choose original Tungaloy inserts supplied via Metav Werkzeuge — contact our consultants at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for matching cutter bodies and application advice Technical data Article number: 6735588 Manufacturer SKU: TUN6735588 SKU: 6735588-Tungaloy Model series: Fräswendeschneidplatten Designation: TCGT160608 AH120 Tungaloy-Wendeplatte Dimensions & core values Size: 16 mm Thickness: 6.35 mm Nose radius: 0.8 mm Clearance angle: 7° Angle: 60° ISO designation: 160608 Materials & features Material: Hartmetall Coating / grade: AH120 (PVD-coated) Hole style: Cylindrical hole + single-sided countersink 40°–60° Chipbreaker: One-sided Plate shape: Triangular Application: Fräsen FAQ What milling tasks is this insert suited for? The insert is designed for face, shoulder, slot, high-feed and contour milling within compatible Tungaloy milling systems; the combination of the AH120 grade and the triangular 60° geometry supports these applications. How does the AH120 grade affect performance? AH120 is a PVD-coated carbide grade that provides improved wear resistance and edge stability for milling, which increases the service life of the insert and helps maintain consistent machining results. Is the insert compatible with other manufacturers’ cutter bodies? Compatibility requires matching seat geometry and clamping method; the TCGT160608 insert must be used with a cutter body designed for its 16 mm size, central hole and 60° triangular seating to ensure safe clamping and repeatable accuracy. How does the 0.8 mm nose radius influence surface finish? A 0.8 mm nose radius balances corner strength with the ability to produce a fine surface finish; it reduces the risk of edge chipping while enabling precise profile work. What is the purpose of the countersunk hole design? The cylindrical hole with a single-sided countersink (40°–60°) secures the insert in the pocket and allows precise positioning, improving concentricity and repeatability during milling. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 160608 AH3135 Wendeplatten - Tungaloy
Take advantage of PVD-coated carbide and the wear-resistant AH3135 grade for dependable, high-process-stability milling. The triangular insert with a 0.8 mm corner radius and a cylindrical hole with one-sided countersink ensures secure clamping and consistent edge life; order or request consultation via Metav Werkzeuge for application support. TCGT 160608 AH3135 triangular indexable insert for milling — Tungaloy TCGT160608 AH3135 is a triangular carbide indexable insert engineered for reliable milling performance within Tungaloy tooling systems, optimised for face, shoulder, slot, high-feed and contour milling. Tungaloy triangular insert TCGT160608 AH3135 PVD-coated carbide for wear resistance With cylindrical hole and 40°–60° countersink 0.8 mm corner radius, suitable for secure clamping Consistent cutting performance for high-process-stability The combination of PVD-coated carbide and the AH3135 grade delivers a balance between wear resistance and fracture toughness, making the insert particularly suited to applications where a sharp cutting edge and process security are both required. As a triangular indexable solution, this component provides three cutting edges per corner and is conceived to reduce downtime through predictable edge life. The metallurgical design reduces flank wear and supports repeatable surface finish, which translates into longer production runs and fewer regrinds. Design features that simplify tool setup and retention A defining mechanical advantage is the insert’s cylindrical hole with one-sided countersink (40°–60°), which interfaces with standard Tungaloy milling bodies and clamping screws to ensure reliable seating and torque transmission. The triangular form and the 60° included angle provide geometric stability during interrupted cuts and contouring tasks. Clearances and form fit minimise microvibrations, which helps to protect the cutting edge and to secure consistent chip flow under varying cutting conditions. Application suitability and machining benefits This grade is developed for versatile milling tasks — from face and shoulder work to slots and high-feed contouring — where both edge sharpness and controlled chip formation are essential. The 0.8 mm corner radius offers a compromise between strength and edge definition: it supports robust corner performance while maintaining the ability to produce acceptable edge finishes. The single-sided chipbreaker geometry assists chip control on many steels and alloyed materials, reducing the risk of built-up edge and facilitating stable long-run production. Practical specifications and engineering guidance Key geometric values support process planning: 6.35 mm thickness, size 16, 7° clearance angle and the standard 60° insert geometry. These dimensions make the component compatible with Tungaloy milling systems that match the TCGT160608 form factor. For optimal results, ensure the insert seat and clamping screw are clean and undamaged, and select cutting parameters consistent with the workpiece material and machine rigidity. For further data or cutting examples, technical sheets and application notes are available to support integration into production. For machining projects that prioritise process security and predictable edge life, consult Metav Werkzeuge for tailored recommendations and to source the Tungaloy insert; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6735587 SKU: 6735587-Tungaloy Manufacturer SKU: TUN6735587 Brand: Tungaloy Model series: Milling indexable inserts Facts Size: 16 mm Thickness: 6.35 mm Corner radius: 0.8 mm Clearance angle: 7° Insert angle: 60° Manufacturer article number: 6735587 Special features Material: carbide Coating: PVD-coated carbide (AH3135) Shape: triangular Hole: cylindrical hole and one-sided countersink (40°–60°) Chipbreaker: single-sided Application: milling Compatible with Tungaloy milling systems Wear- and fracture-resistant grade FAQ What materials is this insert suitable for? The TCGT160608 AH3135 insert is designed for a broad range of materials where a sharp edge and process stability are required; the AH3135 grade offers good wear resistance and controlled chip formation on many steels and alloyed materials. How does the insert secure to the cutter body? Retention relies on the cylindrical hole with a one-sided countersink (40°–60°) in combination with a matching clamping screw and seat; correct seating ensures torque transmission and repeatable positioning for the Tungaloy system. What machining tasks are recommended for this geometry? Typical uses include face milling, shoulder milling, slotting, high-feed and contour operations, depending on the assigned milling body and cutting parameters. What are the key dimensions to check before fitting? Important values are the 16 mm size, 6.35 mm thickness and 0.8 mm corner radius; verify the cutter body accepts TCGT160608 inserts and the clamping mechanism matches the hole / countersink design. Is the AH3135 grade suitable for interrupted cuts? Yes. The AH3135 PVD-coated carbide is engineered to resist wear and edge chipping, offering reliable performance in interrupted and continuous milling when used within recommended cutting data. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 16T302 KS05F Wendeplatten - Tungaloy
Benefit from the combination of KS05F wear resistance, a precise 0.2 mm corner radius and ISO compatibility to maintain steady production and consistent surface quality; order the insert via Metav Werkzeuge or consult our specialists for application matching. TCGT 16T302 KS05F Turning insert – Tungaloy The TCGT16T302 KS05F is an ISO‑standard triangular indexable insert designed for turning applications, offering a balanced mix of wear resistance, edge stability and straightforward holder compatibility. ISO‑standard triangular insert TCGT form KS05F carbide grade for robust wear resistance 0.2 mm corner radius for precision finishing Cylindrical hole with single‑side countersink Engineered for productive turning and long tool life The Tungaloy indexable insert in KS05F carbide is formulated to combine wear resistance with sufficient toughness for common turning operations. The grade supports stable cutting-edge life and reduces the frequency of insert changes, which contributes to more predictable cycle times and lower process interruptions. By choosing this geometry and grade combination, workshops gain a reliable cutting edge that tolerates a range of operating conditions without sacrificing productivity. The single‑sided chipbreaker aids chip control during external and internal turning, improving machine uptime and reducing secondary handling. Precision geometry that improves surface quality and dimensional control A 0.2 mm corner radius with a 7° clearance angle and 60° included angle delivers a controlled cutting engagement suited to finishing passes and light contouring. The small radius minimises tool mark depth while preserving edge strength for repeatable tolerances. For customers less familiar with insert geometry: a smaller corner radius gives finer finish and lower cutting forces at similar feeds, whereas the clearance angle prevents rubbing and heat build‑up at the flank. The result is consistent workpiece appearance and reduced need for rework when the cutting conditions and machine rigidity are appropriate. Simple compatibility and reduced setup complexity The TCGT16T302 follows ISO standards for form, size and hole configuration, so compatibility with holders is determined by form, clearance angle, tolerance class, fastening, size and thickness. The triangular plate form with a cylindrical hole and single‑side countersink (40°–60°) fits a wide range of external holders and boring bars; the nominal 16 mm size and 3.97 mm thickness make inventory management straightforward across common tool families. Specifying ISO‑compliant parts reduces setup time and simplifies replacement logistics — select the matched holder and clamp set to ensure correct seating and repeatable performance. For high‑precision turning with Tungaloy’s KS05F grade, contact Metav Werkzeuge for assistance in selecting the correct insert and corresponding holder; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and supply. Technical Data Article number: 6843414 SKU: 6843414-Tungaloy Manufacturer SKU: TUN6843414 Manufacturer article no.: 6843414 Model series: ISO turning indexable inserts Material: carbide Grade: KS05F Application: Turning Facts Size: 16 mm Thickness: 3.97 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle: 60° Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Special features Triangular plate form ISO‑standard TCGT16T302 form Single‑sided chipbreaker Cylindrical hole with single‑side countersink Tungaloy carbide grade KS05F Compatible with matching external holders and boring bars Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What applications is this insert intended for? The TCGT16T302 KS05F turning insert is intended for external and internal turning operations where a balance of wear resistance and edge stability is required. How does the 0.2 mm corner radius affect the finish? A 0.2 mm corner radius on the KS05F carbide insert provides finer surface finish and reduced tool marks during finishing passes while maintaining adequate edge strength for repeatable dimensional control. Is this insert compatible with standard ISO holders? Yes, the ISO TCGT form and the specified size and thickness allow the insert to fit holders that match the form, clearance angle, tolerance class, fastening and thickness requirements. What benefits does the KS05F grade provide? KS05F offers a tailored mix of wear resistance and toughness for productive turning, delivering longer tool life and stable cutting edges under typical turning conditions. What does the hole style mean for clamping? The cylindrical hole with a single‑side countersink (40°–60°) ensures secure clamping and correct insert positioning in compatible toolholders designed for the ISO TCGT form. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 16T302 TH10 Wendeplatten - Tungaloy
Take advantage of a sharp, uncoated carbide grade that delivers low cutting forces and clean surfaces together with ISO compatibility for straightforward toolholder matching; order directly via Metav Werkzeuge or consult the team for application advice. TCGT16T302 TH10 triangular indexable insert for turning by Tungaloy — ISO 16T302 The TCGT16T302 TH10 is an ISO‑standard triangular indexable insert designed for external and internal turning, optimised for non‑ferrous materials and applications that benefit from a sharp, uncoated cutting edge. ISO‑standard triangular insert, 16 mm Sharp TH10 uncoated carbide grade 0.2 mm corner radius for fine finishes Cylindrical hole with single‑side countersink Improved process reliability through material and geometry The combination of a TH10 uncoated carbide grade and a triangular geometry provides predictable cutting behaviour in applications where low cutting forces are important. The sharp cutting edge supports reduced chatter and a consistent chip formation, which translates into a more stable machining process and fewer interruptions. Thanks to the ISO standard form, compatibility with a wide range of holders is achieved by matching the insert’s form, 7° relief angle, tolerance class, fastening and thickness, ensuring straightforward integration into existing tool systems. Consistent surface finish and controlled cutting forces A 0.2 mm corner radius and the sharp uncoated edge combine to yield fine surface quality on softer and non‑ferrous workpieces, while the single‑side chipbreaker helps to manage swarf and preserve edge life where lower cutting forces are preferred. The geometry is tailored to assist in achieving cleaner finishes without aggressive cutting‑edge coatings, making the insert suitable for operations where minimal burr and tight surface tolerances are required. Secure seating and repeatable clamping for production use The insert’s cylindrical hole with a single‑side countersink (40°–60°) ensures reliable mechanical anchoring and repeatable seating when paired with the appropriate clamping set and screws. The 3.97 mm thickness and the ISO‑defined size permit secure fixation and straightforward indexing, which reduces setup time and supports uninterrupted series production. Compatibility is determined by matching form, size and thickness to the selected holder and clamping system. Application guidance and efficiency gains Intended for external and internal turning, the insert is particularly effective on non‑ferrous materials and in turning operations where a clean surface and low power consumption are priorities. Selecting the TH10 grade aligns cutting performance with economy: sharper, uncoated edges lower cutting forces and may extend productive runtime in suitable applications. For users seeking predictable, repeatable results, this geometry and grade combination offers a pragmatic balance of finish quality and tool life. Contact Metav Werkzeuge for tailored advice on holder compatibility and process parameters — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the TCGT16T302 and suitable tooling solutions. Technical data Article number: 6807704 Manufacturer SKU: TUN6807704 Model series: ISO turning indexable inserts Material: Carbide Grade: TH10 Shape designation: TCGT16T302 Key measurements Size: 16 mm Thickness: 3.97 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 60° Special features Uncoated carbide grade TH10 Single‑side chipbreaker Cylindrical hole with single‑side countersink (40°–60°) ISO‑standard insert for simple holder compatibility Suitable for external and internal turning Optimised for non‑ferrous materials and low cutting forces FAQ What materials is this insert suitable for? The TCGT16T302 with TH10 grade is optimised for non‑ferrous materials and similar workpieces where a sharp, uncoated edge improves surface finish. How does the chipbreaker affect machining? The single‑side chipbreaker supports controlled chip formation and evacuation, aiding consistent surface quality and reducing risk of entanglement. What determines holder compatibility for this insert? Compatibility depends on the insert form, 7° relief angle, tolerance class, fastening method, size and thickness; matching these ensures secure seating. Can the insert be used for both external and internal turning? Yes — the geometry and thickness make the insert suitable for both external and internal turning applications. What is the corner radius and why is it important? The corner radius is 0.2 mm; a small radius contributes to finer surface finishes and lower cutting forces in suitable operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 16T304 KS05F Wendeplatten - Tungaloy
Take advantage of the combination of durable carbide construction, a balanced KS05F grade for wear resistance and toughness, and precise ISO geometry for reliable turning performance; order the insert directly via Metav Werkzeuge or consult our team for application support. TCGT16T304 KS05F ISO turning insert — triangular, 60° main angle, Tungaloy TCGT16T304 KS05F is an ISO‑standard triangular indexable insert designed for general turning applications where a balance of wear resistance and edge stability is required ISO 60° triangular insert, size 16 Tungaloy KS05F carbide grade for toughness Single-sided chipbreaker for controlled chips Cylindrical hole with 40°–60° countersink Improved cycle times through consistent edge performance The triangular indexable insert delivers repeatable cutting behaviour thanks to its carbide substrate and the KS05F cutting grade. These characteristics reduce flank wear progression and help maintain tolerances over longer tool life, which translates into fewer tool changes and decreased machine downtime. The single-sided chipbreaker supports stable chip formation on a wide range of steels and alloyed materials, making the insert suitable for both roughing and finishing passes where predictable cutting forces are desirable. Easy integration into existing tool systems Compatibility with toolholders is governed by geometric parameters such as form, clearance angle, tolerance class, clamping method, size and thickness. The insert’s 60° included angle and 7° clearance angle, combined with its 3.97 mm thickness and triangular form, make it compatible with a broad spectrum of ISO turning holders. The cylindrical hole with one‑side countersink (40°–60°) ensures secure clamping and straightforward replacement, so integration into an existing holder setup is both reliable and repeatable. Optimised for wear resistance without sacrificing toughness The KS05F specification provides a manufacturing‑grade solution that balances hardness and edge resilience. This trade‑off is particularly beneficial where interrupted cuts or variable feed conditions occur: the grade delivers stable edge integrity while resisting abrasive wear. For workshops seeking a practical compromise between long life and dependable cutting behaviour, this grade reduces unexpected tool failure and the associated scrap or rework. Practical geometry choices for consistent surface quality A 0.4 mm corner radius supports good surface finish and dimensional control while still offering enough robustness for common turning operations. The insert’s dimensions — including its 16 mm inscribed circle and 3.97 mm thickness — contribute to rigidity in the tool assembly, which reduces vibration and helps achieve consistent surface quality. When selecting an insert, pair the geometry with the correct chipbreaker and grade to match the specific material and feed/speed combination for best results. For machining projects that demand dependable wear resistance and repeatable performance, contact Metav Werkzeuge for the Tungaloy TCGT16T304 KS05F insert and personalised application advice — eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical Data Manufacturer item no.: 6843415 SKU: 6843415-Tungaloy Manufacturer SKU: TUN6843415 Model series: ISO‑Drehwendeschneidplatten Designation: TCGT16T304 KS05F Tungaloy indexable insert Key Figures Size (inscribed circle): 16 mm Thickness: 3.97 mm Corner radius: 0.4 mm Included angle: 60° Clearance angle: 7° Countersink range: 40°–60° Design & Special Features Material: carbide Cutting grade: KS05F (Tungaloy) Plate shape: triangular Hole: cylindrical with one‑side countersink Chipbreaker: single‑sided Intended application: turning Compatibility determined by form, clearance angle, tolerance class, clamping, size and thickness FAQ What machining operations is this insert intended for? The TCGT16T304 KS05F insert is intended primarily for turning operations, covering both external and internal turning tasks where a triangular ISO insert is suitable. Which materials are best matched to the KS05F grade? KS05F is a Tungaloy carbide grade designed to offer a balance of wear resistance and toughness, making it suitable for a broad range of steels and alloyed materials commonly encountered in turning. How does the chipbreaker influence performance? A single‑sided chipbreaker produces controlled chips and aids stable cutting forces; the chip geometry on this insert complements the KS05F grade to improve surface finish and reduce the risk of chip jamming. How is holder compatibility ensured for this insert? Compatibility depends on matching the insert form, 7° clearance, tolerance class, clamping method, 16 mm size and 3.97 mm thickness with the toolholder specifications — the insert’s ISO designation simplifies selecting a matching holder. What does the 0.4 mm corner radius mean for finishing? A 0.4 mm corner radius helps achieve a fine surface finish while retaining sufficient edge strength for routine turning operations; smaller radii favour finer finishes, while larger radii increase robustness. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCGT 16T304 NS9530 Wendeplatten - Tungaloy
Best suited where high-quality surface finish and low cutting forces are required: the combination of an uncoated cermet grade (NS9530) with a 0.4 mm nose radius delivers consistent finishing performance for continuous turning operations, while the ISO form and standard hole geometry ensure straightforward compatibility with standard holders and clamping systems. Order the insert or request specialist advice via Metav Werkzeuge for application-specific selection. TCGT 16T304 NS9530 ISO turning insert for finishing by Tungaloy The TCGT16T304 NS9530 is an ISO-standard triangular turning insert designed for finishing cuts on steel, offering a sharp cutting edge and low cutting forces for continuous cutting and small depths of cut. Uncoated cermet grade NS9530 0.4 mm nose radius for fine finishing 7° clearance angle for low cutting forces Triangular form with cylindrical hole and countersink 3.97 mm plate thickness suitable for ISO holders High-precision finishing for steel turning applications The insert’s uncoated cermet composition, designated NS9530, is engineered specifically as a finishing grade for steel, providing a sharp cutting edge and reduced cutting forces that favour continuous cuts and improved surface quality. Cermet combines ceramic and metallic phases to deliver superior wear resistance and stable edge retention during light, high-rpm finishing operations; this results in a consistently finer surface finish compared with many general-purpose grades. For applications where a smooth part surface and tight tolerances are required, the combination of the 0.4 mm nose radius and the sharp edge geometry supports repeatable results with low tendency for built-up edge. Secure clamping and ISO compatibility for reliable machining Compatibility with clamping systems depends on form, clearance, tolerance class, fastening, size and thickness; the triangular ISO form and the standardized hole arrangement — cylindrical hole with a single-sided countersink (40°–60°) — permit use with common external holders and boring bars that accept ISO turning inserts. The insert’s 3.97 mm plate thickness and nominal size 16 provide the mechanical support required for finishing operations while the 7° clearance angle reduces rubbing and minimises cutting resistance. When configuring the system, ensure the correct holder geometry and appropriate shim or clamp set; the system concept comprises the ISO insert, a matched external holder or boring bar, a support shim or clamp set and replacement screws. Operational benefits and application guidance Designed for finishing on steel with small depths of cut, the grade excels under continuous cutting conditions where a steady chip flow is maintained. The single-sided chipbreaker helps control chip formation for short, consistent chips at low to moderate feed rates, reducing the risk of surface damage and easing part handling. For best results select a stable machine setup, rigid clamping and cutting parameters matched to light finishing passes. The insert’s geometry and grade favour high surface quality and reduced rework, making it suitable for precision components where dimensional accuracy and finish are priorities. Contact Metav Werkzeuge for tailored selection and batch supply of Tungaloy finishing inserts, or request application advice from our specialists by e-mail or phone Technical Data Article number: 6997954 Manufacturer SKU: TUN6997954 Label: TCGT16T304 NS9530 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Numbers / Core technical data Radius: 0.4 mm Plate thickness: 3.97 mm Plate size: 16 Included angle: 60° Clearance angle: 7° Manufacturer article number: 6997954 Designs / Special features Uncoated cermet cutting material NS9530 Triangular plate form With hole: cylindrical hole + single-sided countersink (40°–60°) Single-sided chipbreaker Intended application: turning System components: ISO insert, matching holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert intended for? The TCGT16T304 NS9530 is a finishing grade optimised for steel; the uncoated cermet composition provides a sharp cutting edge and good surface finish in continuous turning operations. Which holders are compatible with this ISO insert? Compatibility is determined by form, clearance angle, tolerance class, fastening, size and thickness; use a holder or boring bar designed for ISO triangular inserts of size 16 and plate thickness 3.97 mm. How does the 0.4 mm nose radius influence the finish? A 0.4 mm nose radius produces a finer surface and reduces stress concentration at the tool tip, supporting high-quality finishing passes at modest feeds. Is the insert suitable for interrupted cuts? The grade is primarily intended for continuous finishing; interrupted cuts may require a different geometry or a tougher grade to withstand impact. What is the hole geometry and why does it matter? The insert features a cylindrical hole with a single-sided countersink (40°–60°), a standard arrangement that ensures secure clamping in compatible ISO holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 16T304 NS9530 Wendeplatten - Tungaloy
A data inconsistency has been identified: the item is specified in one entry as an uncoated cermet cutting grade (NS9530), intended for fine finishing of steel, while another entry describes the material as Hartmetall (carbide). Cermet and carbide are different substrate types with distinct cutting characteristics and performance expectations, so this contradiction prevents the preparation of a reliable product description, machining recommendation or technical data sheet. Please confirm which specification is correct — the uncoated cermet grade NS9530 or a carbide substrate — and verify associated attributes such as the nose radius (0.4 mm), relief angle (7°) and triangular ISO form. Once the material and related parameters are clarified, a complete, industry-accurate product text and technical listing can be provided. For clarification, please contact Metav Werkzeuge at info@metav-werkzeuge.com or by telephone on +49 2822 7131930.
TCGT 16T304 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of an ISO‑standard triangular form, a sharp uncoated carbide grade (TH10) and secure clamping geometry for efficient external and internal turning; order the insert directly via Metav Werkzeuge or request application advice from our consultants. TCGT16T304 TH10 – ISO triangular turning insert (uncoated carbide), Tungaloy TCGT16T304 TH10 is an ISO‑standard triangular indexable insert engineered for precision external and internal turning applications, particularly where low cutting forces and clean surface finishes are required. ISO triangular insert for turning applications Uncoated carbide grade TH10 for low cutting forces 0.4 mm corner radius for accurate profile turning Cylindrical hole with one-sided countersink for fixing Higher throughput with a sharp universal grade The uncoated carbide TH10 grade delivers a sharp cutting edge that reduces cutting forces and supports cleaner surface finishes in many non‑ferrous machining tasks. This results in improved productivity through higher material removal rates with less power demand and reduced tendency for built‑up edge. The indexable design allows fast, repeatable insert changes so cycle times are kept short and process stability is increased. For shops aiming to boost efficiency on soft metals, the combination of a sharp grade and stable geometry provides tangible time‑and‑cost benefits. Consistent profiles and secure clamping for repeatable parts The insert’s ISO triangular geometry with a 60° included angle and 0.4 mm corner radius gives a defined cutting point for profile accuracy and toolpath predictability. The 7° clearance angle supports smooth chip flow and reduces rubbing on the flank. The insert is supplied with a cylindrical hole and a one‑sided countersink (40°–60°) to ensure secure clamping in compatible holders; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. This predictable mounting reduces vibration and supports consistent surface quality across batches. System benefits that reduce downtime and handling effort The indexable insert is designed as part of a complete system: ISO insert, matching external holder or boring bar, underlay/clamping set and spare screws. The standardised interface means replacement is rapid and operator training is straightforward, which helps to minimise machine downtime and simplify inventory management. The 3.97 mm plate thickness and 16 mm size ensure robust seating in typical turning holders while the single‑sided chipbreaker promotes controlled chip formation appropriate to the intended materials. Suitable applications and material scope Optimised for external and internal turning, the insert is particularly effective on non‑ferrous materials and operations where a clean finish and low cutting force are priorities. The single‑sided chipbreaker and sharp edge make it a practical choice for finishing passes and light to medium depth cuts. Where alternative workpiece materials or heavy roughing are required, selection of a different grade or chipbreaker matched to stability and material will deliver better wear performance and process security. Contact Metav Werkzeuge for application guidance or to request detailed technical data for Tungaloy turning inserts at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical specification Article number: 6807711 SKU: 6807711-Tungaloy Manufacturer SKU: TUN6807711 Key measurable data Insert designation: 16T304 Size: 16 mm Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 60° Design and special features Shape: triangular Material: carbide (uncoated) Grade: TH10 Hole: with cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: single‑sided Typical system: ISO insert matched to external holder or boring bar, underlay/clamping set, spare screws Application: turning (external and internal) FAQ What materials is this insert best suited for? The TCGT16T304 TH10 insert is optimised for non‑ferrous materials and applications where a sharp, uncoated carbide edge supports low cutting forces and clean surfaces. How does the insert fix to a holder? Fixation is by the central cylindrical hole with a one‑sided countersink; secure clamping requires a holder compatible with the insert’s form, clearance angle, tolerance class, fastening method, size and thickness. What effect does the 0.4 mm corner radius have on machining? A 0.4 mm corner radius provides a balance between profile accuracy and edge strength, allowing fine finishing while maintaining resistance to minor edge chipping during light to medium cuts. Is the cutting edge coated? This insert uses an uncoated carbide cutting edge (TH10), chosen to deliver sharpness and low shear forces for the intended material range. Which operations suit this insert best? The insert is intended for external and internal turning, particularly finishing passes or general machining of non‑ferrous workpieces where surface quality and low cutting forces are important. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCGT 16T304 TH10 Wendeplatten - Tungaloy
Take advantage of the sharp TH10 uncoated carbide grade and the ISO 60° triangular geometry to achieve low cutting forces and consistently clean finishes in turning operations; order the genuine insert via Metav Werkzeuge or consult the team for application-specific cutting data. TCGT16T304 TH10 Tungaloy insert — ISO triangular turning insert for turning, uncoated carbide, 60° geometry The TCGT16T304 TH10 is an ISO triangular turning insert designed for external and internal turning where low cutting forces and clean surface quality are priorities, especially in non-ferrous applications. ISO triangular 60° geometry Uncoated carbide grade TH10 0.4 mm corner radius Single-sided chipbreaker with mounting hole Consistent surfaces and efficient cutting from an uncoated, sharp grade The combination of a sharp uncoated carbide cutting edge and the TH10 grade reduces built-up edge and keeps cutting forces low, which is especially beneficial when machining softer, ductile materials. A reduced tendency for material adhesion leads to cleaner surface finishes and less rework, while the sharp edge geometry helps maintain dimensional stability at moderate feeds and speeds. This makes the insert a practical choice for series production where maintaining surface integrity is critical and tool change frequency must be minimised. Predictable seating and system compatibility for stable machining Compatibility with the clamping system is governed by the insert form, 7° clearance angle, tolerance class, mounting method, size and thickness. The triangular shape with a cylindrical hole and single-side countersink (40°–60°) ensures positive locating and repeatable seating in compatible holders. When combined with a suitable external holder or boring bar, underlay/clamping set and replacement screws, users benefit from reduced vibration, consistent chip flow and predictable tool life, supporting stable, high-precision turning processes. Practical guidance for selection and application Select the single-sided chipbreaker and grade in line with workpiece material and machine rigidity: the grade is optimised for non-ferrous materials and operations that demand low cutting forces and good surface integrity. The insert’s 0.4 mm corner radius and 3.97 mm thickness balance edge strength with the ability to produce fine profiles; the 60° included angle offers multiple indexing positions for extended service life. For best results, match cutting parameters and holder geometry to the component’s clamping conditions and the chosen chipbreaker style to sustain productivity and surface quality. Contact Metav Werkzeuge to discuss cutting data, stock and application advice for genuine Tungaloy TCGT16T304 TH10 inserts: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6807709 Manufacturer SKU: TUN6807709 SKU: 6807709-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: TCGT16T304 TH10 Tungaloy-Wendeplatte Core data Shape: triangular Size: 16 mm Thickness: 3.97 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 60° Hole style: cylindrical hole + single-side countersink (40°–60°) Special features Material: carbide Grade/coating: TH10, uncoated Chipbreaker: single-sided Application: turning (external and internal) Compatibility: ISO insert; determined by form, clearance angle, tolerance class, clamping, size and thickness Mounting: with mounting hole; requires appropriate holder, underlay/clamping set and replacement screws Typical use: non-ferrous materials and applications needing low cutting forces and clean surfaces FAQ What materials is this insert best suited for? The TCGT16T304 TH10 Tungaloy insert is optimised for non-ferrous materials and similar applications where an uncoated carbide edge delivers low cutting forces and clean surface results. How does the insert locate in a holder? Location is achieved via the cylindrical hole with single-side countersink (40°–60°); correct seating depends on matching holder form, tolerance class and clamping components. What advantages does the TH10 grade provide? TH10 is a sharp, universal uncoated carbide grade that reduces built-up edge formation, supporting improved surface finish and lower cutting forces in compatible turning operations. Which chipbreaker should be chosen for stable chip control? The single-sided chipbreaker supplied offers good chip control for the intended material range; select chipbreaker geometry according to workpiece material, feed and rigidity for optimal chip evacuation. Are there specific dimensional values to check before ordering? Check the insert size (16 mm), thickness (3.97 mm), corner radius (0.4 mm) and the 60° included angle to ensure fit with the intended holder and application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 16T308 KS05F Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a wear-resistant KS05F cutting grade and a compact 0.8 mm corner radius for predictable performance and quick index changes; order directly via Metav Werkzeuge or consult the in-house specialists for selection and availability. TCGT 16T308 KS05F indexable turning insert by Tungaloy — triangular, 0.8 mm radius, ISO standard The TCGT 16T308 KS05F is an ISO-standard triangular indexable turning insert designed for external and internal turning operations where a balance of wear resistance and edge stability is required. ISO triangular insert for turning Tungaloy KS05F grade for wear resistance 0.8 mm corner radius, 7° clearance angle Cylindrical hole with 40°–60° countersink Consistent machining through a specialised grade and material The Tungaloy KS05F grade, applied to a carbide substrate, delivers a focused mix of wear resistance and edge stability. This composition reduces unexpected flaking and maintains cutting-edge geometry over longer tool life, which results in fewer index changes and more consistent part quality. The result is a pragmatic improvement in process reliability and predictable productivity for turning operations, particularly where repeatability and surface finish matter. Rapid tool changes and secure clamping for reduced downtime Built to the ISO plate family, the triangular geometry and the specified cylindrical hole with a 40°–60° countersink ensure secure seating and repeatable clamping in matching toolholders. The 7° clearance angle and the plate thickness (3.97 mm) contribute to stable engagement and reduced chatter under typical turning feeds. The availability of three indexed cutting edges per insert and the standardised dimensions ease inventory management and allow faster changeovers, cutting non-productive time in the workshop. Versatile turning performance tailored by geometry The insert’s 0.8 mm corner radius and its single-sided chipbreaker make it suitable for a range of turning tasks where a small radius is preferred for edge strength without compromising profile detail. The triangular form provides a compact cutting face and, combined with the KS05F chemistry, supports dependable results on routine turning applications. Selection of an appropriate holder and matching chipbreaker will fine-tune chip control and optimise the balance between surface finish and tool life. For reliable, industry-proven inserts from Tungaloy choose Metav Werkzeuge as the supplier — contact Metav Werkzeuge for technical advice and stock information via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6843416 Manufacturer SKU: TUN6843416 SKU: 6843416-Tungaloy Model series: ISO turning indexable inserts Facts Size: 16 mm Thickness: 3.97 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 60° Special features Grade: KS05F (Tungaloy) Material: carbide Shape: triangular Hole: with hole Hole style: cylindrical hole + one-side countersink (40°–60°) Chipbreaker: one-sided Application: turning FAQ What is the primary advantage of the KS05F grade? The KS05F grade used on the TCGT16T308 KS05F provides a balance of wear resistance and edge stability, extending effective cutting life while maintaining consistent performance. Which machining operations suit this insert? This triangular indexable insert is intended for external and internal turning where the geometry and grade support repeatable cutting and good surface finish. How does the hole and countersink affect clamping? The cylindrical hole with a 40°–60° countersink ensures a secure and repeatable seat in compatible holders, improving clamping stability and reducing tool movement during cuts. Can the 0.8 mm corner radius be used for finishing passes? A 0.8 mm corner radius offers a compromise between edge strength and finish; it is appropriate for many finishing and profile turning tasks, depending on the desired surface quality. Is this insert compatible with all ISO turning holders? Compatibility depends on matching the ISO form, clearance angle, tolerance class, mounting method, size and thickness of the insert to the chosen holder; the insert conforms to ISO dimensions for simplified selection. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 16T308 NS520 Wendeplatten - Tungaloy
Combining high-quality surface finish, predictable tool life and straightforward ISO compatibility, this cermet insert supports productive finishing operations and stable process control; order directly via Metav Werkzeuge or contact our consultants for application advice. TCGT 16T308 NS520 Tungaloy turning insert — ISO triangular finishing insert A TCGT16T308 NS520 insert for precision external and internal turning, optimised for finishing passes on steel. ISO triangular insert TCGT 16T308 NS520 Cermet grade NS520 for finishing and light cuts 60° insert geometry with 0.8 mm corner radius Compatible with ISO turning toolholders, with hole Achieve consistent surface finish and dimensional accuracy The NS520 cermet grade is designed for finishing to light machining, delivering a fine and repeatable surface finish while keeping dimensional tolerances stable. Cermet is a ceramic–metal composite that combines high hardness with improved edge resistance compared with conventional carbides; this results in smoother cutting action and reduced burr formation during final passes. The insert’s 0.8 mm corner radius and 60° geometry favour stable contact conditions, which helps to maintain part accuracy on both external and internal turning operations. Reduce tool changes with predictable wear and process stability Thanks to the coated cermet composition and an even-wear behaviour, the cutting edge offers longer effective life during finishing cycles, lowering the frequency of regrinds or index changes. As an ISO-standardised indexable insert, it fits into compatible holders when form, relief angle, tolerance class, fastening method, size and thickness match — a standardised system that supports quick replacement and minimal downtime. The result is improved productivity and fewer unexpected interruptions in production. Secure clamping and straightforward integration into existing setups The triangular plate design with a cylindrical hole and single-sided countersink (40°–60°) ensures reliable clamping and correct seating in most ISO toolholders, reducing the chance of misalignment. The plate thickness of 3.97 mm and the 7° relief angle are important for selecting an appropriate holder and provide the mechanical stability needed for finishing. The single-sided chipbreaker supports controlled chip formation during light cuts; selecting the correct chipbreaker and grade for the workpiece material ensures safe, efficient machining. For tailored guidance on integrating Tungaloy finishing inserts into existing turning cells and to arrange fast supply from Metav Werkzeuge, please contact our technical sales team at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6807714 Manufacturer SKU: TUN6807714 SKU: 6807714-Tungaloy Model series: ISO turning inserts Grade: NS520 Manufacturer: Tungaloy Core data Geometry angle: 60° Corner radius: 0.8 mm Relief angle: 7° Plate thickness: 3.97 mm Size (inscribed circle): 16 mm Design and special features Material: cemented carbide body Cutting grade: NS520 (cermet / coated cermet) Chipbreaker: single-sided Hole style: cylindrical hole with single-sided countersink 40°–60° Plate form: triangular Application: turning (external and internal) FAQ What materials is this insert optimised for? The NS520 grade is formulated for finishing of steel; the TCGT16T308 NS520 Tungaloy insert is particularly suited to steel finishing where surface quality and dimensional control are priorities. How does the cermet grade affect tool life and finish? Cermet grades such as NS520 combine ceramic hardness with metallic toughness, which enhances edge retention and provides a finer finish compared with standard carbide inserts, leading to predictable wear characteristics for the Tungaloy turning insert. Which holders are compatible with this insert? Compatibility is determined by the insert’s form, relief angle (7°), tolerance class, fastening method, size (16 mm) and thickness (3.97 mm); the ISO-standard TCGT form fits matching ISO toolholders when these parameters are respected. What is the purpose of the countersunk hole design? The cylindrical hole with a single-sided countersink (40°–60°) provides secure clamping and correct seating in standard clamping systems, improving stability for finishing operations with this Tungaloy insert. Is this insert suitable for internal as well as external turning? Yes, the triangular ISO geometry and the single-sided chipbreaker make the insert suitable for both external and internal turning in finishing applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 16T308 TH10 Wendeplatten - Tungaloy
Benefit from the combination of the uncoated TH10 carbide grade and the 60° triangular geometry with a 0.8 mm corner radius for low cutting forces, clean surface finishes and reliable edge life in turning applications. Order the TCGT16T308 TH10 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TCGT 16T308 TH10 — ISO triangular turning insert (60°), Tungaloy The TCGT16T308 TH10 is an ISO-standard triangular turning insert engineered for external and internal turning where an uncoated carbide grade supports low cutting forces and improved surface quality. ISO triangular insert with 60° included angle Uncoated carbide grade TH10 for low cutting forces 0.8 mm corner radius for balanced edge strength Cylindrical hole with single-side countersink Versatile geometry for dependable turning performance The triangular 60° geometry provides three usable cutting edges per index, enabling efficient tool use and rapid edge changes. The combination of a medium 0.8 mm corner radius and the 60° included angle offers a compromise between edge strength and surface quality: the radius supports consistent finish while avoiding excessive cutting forces common with larger radii. As an ISO-standard insert, compatibility with holders is determined by form, relief angle, tolerance class, fastening and plate thickness, allowing use in many established turning tool systems. Low cutting forces and clean surface results through material choice The TH10 grade is an uncoated carbide chosen for applications where reduced cutting resistance and good surface integrity matter, particularly with non-ferrous materials and sensitive finishes. Uncoated carbide gives a sharp cutting edge that minimises built-up edge and thermal coating interactions, which helps maintain dimensional accuracy in delicate operations. When machining softer alloys or mixed batches, this grade reduces power draw and contributes to more predictable chip formation, translating directly into higher process efficiency. Secure clamping and stable cutting conditions for repeatable outcomes Mechanical stability is enhanced by a cylindrical hole with a single-sided countersink (40°–60°) that ensures positive, repeatable seating in the clamping system. The plate thickness of 3.97 mm and the 7° relief angle further support rigidity during turning, reducing vibration and improving tool life under typical shop conditions. The insert’s single-sided chipbreaker is optimised to control chip flow for standard turning tasks; selecting the correct chipbreaker and grade for the workpiece material will improve productivity and surface quality in every pass. Contact Metav Werkzeuge for a consultation on Tungaloy TH10 inserts and tailored recommendations for turning setups and holder compatibility Technical data Article number: 6807718 Manufacturer SKU: TUN6807718 SKU: 6807718-Tungaloy Facts Insert size: 16 mm Thickness: 3.97 mm Corner radius: 0.8 mm Relief angle: 7° Included angle: 60° Special features Shape: triangular Grade: TH10 (uncoated carbide) Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Application: Turning Manufacturer: Tungaloy FAQ What materials is this insert best suited for? The TH10 uncoated carbide grade is designed for non-ferrous materials and applications that benefit from lower cutting forces; it performs well on aluminium alloys and similar materials. How many cutting edges are available per insert? The triangular geometry provides three indexable cutting edges; the TCGT16T308 can be rotated to a fresh edge when one becomes worn. Will the insert fit standard ISO turning holders? The insert follows ISO dimensions; compatibility depends on holder form, relief angle, tolerance class, fastening and thickness—check the holder specifications against the insert dimensions before use. What role does the chipbreaker play in turning? The single-sided chipbreaker controls chip shape and evacuation for common turning operations; matching chipbreaker geometry and grade to material and setup improves surface finish and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 16T308 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, uncoated TH10 cutting grade, 0.8 mm corner radius, and ISO compatibility for efficient turning of non-ferrous materials; order the insert via Metav Werkzeuge or consult the team for selection support. TCGT 16T308 TH10 Tungaloy — TCGT16T308 indexable insert for Turning (triangular, 60°) A TCGT16T308 TH10 indexable insert for general turning, designed as an ISO‑standard triangular insert for use in external and internal turning operations. ISO‑standard triangular insert for turning Uncoated carbide TH10 for low cutting forces Single‑sided chipbreaker for clean chip control With cylindrical hole and one‑side countersink 60° geometry with 0.8 mm corner radius Consistent surface quality with a sharp uncoated grade The triangular indexable insert is supplied in an uncoated carbide TH10 grade that promotes low cutting forces and a clean surface finish on non‑ferrous workpieces. The sharp, universal cutting edge reduces built‑up edge formation and helps maintain tool life in applications where a coated grade would increase friction. For manufacturers seeking predictable results on aluminium or brass, the combination of geometry and material provides stable cutting behaviour and simplified machining parameters. Reliable mounting and holder compatibility for production workflows Designed as an ISO‑standard turning plate, the insert features a cylindrical hole with a one‑side countersink (40°–60°) that ensures secure clamping in suitable adapters and toolholders. Compatibility with holders is determined by form, clearance angle, tolerance class, fastening, size and thickness, so the 60° insert profile and 7° clearance align with a wide range of external and internal turning tool systems. This predictability supports efficient change‑overs and reduces setup time on the shop floor. Geometry engineered for chip control and dimensional stability The single‑sided chipbreaker geometry provides controlled chip formation for many turning tasks while the 0.8 mm corner radius balances edge strength and fine surface appearance. The 3.97 mm thickness and triangular form deliver repeatable seating and positional stability in the pocket, which is particularly valuable for serial production where consistent tolerance adherence is required. Where short‑to‑medium cutting lengths are common, this insert achieves an advantageous compromise between robustness and precision. Practical benefits for machining teams and process planners As a universal solution for non‑ferrous and similar materials, the insert reduces the need for multiple special grades, simplifying inventory and tool selection. The uncoated carbide substrate supports ease of use at moderate cutting speeds and allows operators to focus on achieving target feeds and depths without compensating for excessive friction. For process planners, the combination of ISO conformity, defined relief angle and standardised mounting features makes this insert a dependable choice for repeatable production runs. Contact Metav Werkzeuge today for tailored application advice, availability of the Tungaloy TCGT16T308 TH10 insert and assistance with holder compatibility — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical Data Article number: 6807716 SKU: 6807716-Tungaloy Manufacturer SKU: TUN6807716 Numbers / Core technical data Insert designation: 16T308 Diameter / size: 16 mm Thickness: 3.97 mm Edge radius: 0.8 mm Clearance angle: 7° Cutting angle: 60° Special features / Versions Material: carbide Coating / grade: uncoated TH10 Plate shape: triangular Chipbreaker: single‑sided Mounting: with cylindrical hole and one‑side countersink (40°–60°) Application: turning (external and internal) ISO standardised insert series FAQ What materials is this insert best suited for? The TCGT16T308 TH10 insert is optimised for non‑ferrous materials and applications where an uncoated cutting edge supports low cutting forces and a clean surface finish. Which holders are compatible with this ISO insert? Compatibility depends on holder form, tolerance class, fastening method, size and thickness; the TCGT16T308’s cylindrical hole with countersink fits standard ISO‑conforming turning holders designed for 16T308 inserts. Can this insert be used for finishing cuts? Yes — the 0.8 mm corner radius and sharp TH10 grade are suitable for producing fine surface finishes in finishing and light profiling operations on appropriate materials. Is the insert coated or uncoated, and why does that matter? The insert is uncoated (TH10), which reduces friction and built‑up edge on softer, non‑ferrous materials; this choice supports lower cutting forces and improved surface quality compared with some coated grades. What does the 60° geometry mean for machining? A 60° triangular geometry provides three cutting edges per insert and a versatile cutting profile for general turning tasks; the TCGT16T308’s geometry balances accessibility to features with sufficient rigidity. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCMT 080202 DX120 Wendeplatten - Tungaloy
Benefit from the combination of PCD cutting performance, ISO compatibility and a robust triangular form for stable, high‑speed turning. The DX120 grade delivers extended tool life and high productivity for aluminium and non‑ferrous components — order directly via Metav Werkzeuge or consult our specialists for application support. TCMT 080202 DX120 indexable insert for Turning — Tungaloy, PCD The TCMT080202-DIA DX120 is an ISO‑standard triangular indexable insert with a PCD cutting edge, designed for high‑speed external and internal turning of aluminium, non‑ferrous metals and abrasive non‑metal materials PCD grade DX120 for high cutting speeds Extended tool life and wear resistance ISO-standard triangular form for easy indexing Cylindrical hole with countersink for secure clamping Faster cycle times through PCD technology The combination of polycrystalline diamond (PCD) cutting material and the DX120 grade makes this insert especially suited for rapid machining of soft, abrasive and non‑ferrous materials. PCD provides a very hard, wear‑resistant cutting edge that maintains geometry over long runs, which results in reduced downtime and more parts produced per tool life interval. For production environments seeking reliable productivity gains, the insert’s ability to sustain elevated cutting speeds translates directly into shorter cycle times and improved throughput. Predictable economy with extended intervals between changes By offering long tool life and stable wear behaviour, the indexable insert lowers the frequency of tool changes and the associated setup time. The DX120 grade resists abrasive wear typical when machining aluminium alloys containing fillers or other abrasive inclusions, so component cost per cut becomes more predictable. Where quality and repeatability matter, the reduced variation in edge condition helps sustain surface finish and tolerances across batches without frequent requalification. Stable clamping and ISO compatibility for consistent results Manufactured to ISO dimensions, the insert’s triangular form and standardised geometry ensure compatibility with a wide range of external holders and boring bars. Key dimensions include a 0.2 mm nose radius, 2.38 mm thickness and a 60° approach angle, while the 7° relief angle supports secure engagement and chip formation. The insert features a cylindrical hole with a single‑side countersink (40°–60°), enabling firm, repeatable clamping when used with the correct shim and screw set — a prerequisite for vibration‑free turning and consistent surface quality. Chip control and application guidance for optimised machining This insert is supplied with a DIA chipbreaker tailored to aluminium and similar materials, promoting short, controllable chips and preventing reformation at the cutting edge. Selecting the correct chipbreaker and matching the grade to machine stability and workpiece properties is essential: the chip‑forming geometry reduces heat concentration, enabling the PCD edge to operate at higher speeds with stable cutting forces. System composition typically comprises the ISO insert, a compatible external holder or boring bar, a supporting shim/clamping set and replacement screws — choose components according to holder form, clearance angle, tolerance class, size and thickness. Contact Metav Werkzeuge for tailored machining recommendations and to obtain genuine Tungaloy indexable inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6822163 Manufacturer SKU: TUN6822163 SKU: 6822163-Tungaloy Model series: ISO turning indexable inserts Grade: DX120 Cutting material: PCD (polycrystalline diamond) Application: Turning Chipbreaker: DIA Facts Insert size: 08 Thickness: 2.38 mm Nose radius: 0.2 mm Relief angle: 7° Lead/approach angle: 60° ISO code: 080202 Special features Triangular shape Cylindrical hole with single‑side countersink (40°–60°) ISO designation: TCMT080202-DIA Compatible with standard external holders and boring bars Cemented carbide substrate with PCD cutting layer Suited to aluminium, non‑ferrous metals and abrasive non‑metals FAQ Which materials are suitable for this insert? The TCMT080202‑DIA DX120 insert is intended for aluminium, non‑ferrous metals and abrasive non‑metallic materials thanks to its PCD cutting layer and the DX120 grade. What are the key dimensions and angles of the insert? Key data: size 08, thickness 2.38 mm, nose radius 0.2 mm, relief angle 7°, lead angle 60°, ISO code 080202; see SKU TUN6822163 for ordering. How does the DX120 PCD grade improve productivity? The DX120 PCD grade provides high wear resistance and edge stability, enabling higher cutting speeds and longer intervals between tool changes for consistent part quality. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, clamping method, size and thickness; the insert fits standard ISO external holders and boring bars when the holder matches the TCMT080202‑DIA geometry. What chipbreaker is fitted and when should it be used? The insert features the DIA chipbreaker, designed to produce short, controllable chips when turning aluminium and similar non‑ferrous materials under stable cutting conditions. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCMT 080204 DX120 Wendeplatten - Tungaloy
Take advantage of the combination of a PCD cutting edge, DX120 grade and ISO compatibility to increase cycle times and reduce tool changes; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TCMT080204-DX120 ISO turning insert for turning by Tungaloy A TCMT080204-DIA DX120 triangular insert engineered for productive external and internal turning of aluminium and other non‑ferrous materials. PCD cutting edge for abrasive materials ISO‑standard triangular insert format Long tool life at high cutting speeds Compatible with cylindrical hole clamping Engineered for high‑speed, productive turning The insert uses a polycrystalline diamond (PCD) cutting edge in the DX120 grade, enabling high cutting speeds and markedly extended tool life when machining aluminium and non‑ferrous materials. This PCD geometry reduces flank wear and preserves edge geometry over long production runs, which translates directly into fewer tool changes and better machine availability. The result is measurable productivity gains and improved process stability for both short runs and series production. Secure clamping and ISO compatibility that simplify tool management Produced to the ISO specification for triangular turning inserts, the component fits standard holders when form, clearance angle, tolerance class, fastening and thickness are matched. The insert's cylindrical hole with single‑side countersink (40°–60°) and standard shape ensure reliable seating and repeatable clamp force, reducing the risk of movement during interrupted cuts. Clear technical conformity reduces setup time and simplifies inventory management across toolrooms. Durability and cost‑efficiency through material pairing and geometry A carbide substrate combined with a PCD top layer and the DIA chipbreaker provides optimised chip formation for abrasive non‑metallics and aluminium alloys, while the defined corner radius of 0.4 mm supports consistent surface finish. The insert's 2.38 mm thickness and 60° geometry support robust cutting edge support under varying cutting conditions. These design choices reduce rework and extend edge life, delivering lower cost per component and predictable tool performance. For application advice, grade selection or to arrange deliveries of Tungaloy inserts contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and supply options. Technical data Article number: 6822164 SKU: 6822164-Tungaloy Manufacturer SKU: TUN6822164 Model series: ISO‑turning inserts Brand: Tungaloy Insert designation: TCMT080204-DIA Grade: DX120 Insert size: 08 Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Included hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Wedge angle: 60° Material: carbide Cutting material: polycrystalline diamond (PCD) Chipbreaker: DIA Application: turning Typical use: external and internal turning System components: insert, compatible outer holder or boring bar, shim/clamp set and replacement screws FAQ Is this insert suitable for machining aluminium? Yes. The DX120 grade with a PCD cutting edge is designed specifically for aluminium and non‑ferrous materials, providing high cutting speeds and long tool life. What clamping arrangement is required? The insert requires a holder or boring bar compatible with the ISO triangular format and the cylindrical hole with single‑side countersink for secure clamping. How does the polycrystalline diamond layer benefit production? The PCD top layer on the insert reduces abrasive wear and maintains edge sharpness, extending tool life and lowering the cost per part in high‑speed operations. Can this insert be used for internal turning? Yes. The geometry and chipbreaker are suitable for both external and internal turning, subject to appropriate holder selection and machining parameters. What identifies the item for ordering? Order using article number 6822164 or SKU 6822164‑Tungaloy to ensure the correct TCMT080204‑DIA DX120 insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 090202 AH725 Wendeplatten - Tungaloy
Combining a PVD-coated AH725 carbide grade with a controlled one-sided chipbreaker, this insert delivers consistent chip control and process security in turning operations; order the TCMT090202 directly via Metav Werkzeuge or consult the technical team for matching holders and stock details. TCMT090202 AH725 Tungaloy indexable turning insert — PVD-coated carbide, triangular 60° The TCMT090202 AH725 Tungaloy insert is a triangular ISO indexable turning insert designed for external and internal turning, offering a universal, fracture-resistant grade for Stahl and rostfreier Stahl applications. PVD-coated carbide grade AH725 Universal for Stahl and rostfreier Stahl One-sided chipbreaker for stable chips ISO TCMT triangular insert with hole High-process security and material range The combination of a PVD-coated surface and the AH725 carbide matrix provides predictable cutting behaviour across a wide material spectrum. The grade is optimised for both Stahl and rostfreier Stahl, which means fewer tool changes during mixed production runs and a reduced risk of unexpected edge failure. This results in steady cycle times and improved machine utilisation when machining components with varying alloys. Geometry that simplifies clamping and stabilises cuts The triangular ISO TCMT form with a 60° included angle and a 0.2 mm corner radius supports reliable seating in standard holders and delivers favourable cutting forces for a wide range of turning tasks. The 7° clearance angle aids in avoiding rubbing while the cylindrical hole with one-sided countersink (40°–60°) ensures secure, repeatable fastening. Together these features lower vibration sensitivity and support a stable cutting process. Chip control and surface quality for efficient finishing The one-sided chipbreaker design channels chips predictably, reducing recutting and enabling consistent surface finishes on both roughing and finishing passes. The thin 2.38 mm plate thickness contributes to effective heat transfer into the insert body, while the PVD layer improves edge strength. For workshops seeking fewer passes and reliable dimensional results, this configuration offers a tangible process advantage. System compatibility and practical benefits for production As an ISO-standardised turning plate, the insert integrates into standard tool systems consisting of a matching outside holder or boring bar, backing pad and clamping set. The universal character of the AH725 grade reduces complexity in tool inventories, supporting a pragmatic approach to tool management. Stocking this insert can lower tool-change frequency and increase uptime across small to medium series production. For reliable, productive turning with Tungaloy AH725 grade, contact Metav Werkzeuge for tailored advice or to check availability via info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 6864920 Manufacturer SKU: TUN6864920 Model series: ISO turning indexable inserts Label / name: TCMT090202 AH725 Tungaloy-Wendeplatte Facts Insert designation: TCMT090202 Corner radius: 0.2 mm Plate thickness: 2.38 mm Insert size: 09 Clearance angle: 7° Included angle: 60° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Grade / coating: AH725, PVD-coated carbide Material: Hartmetall Chipbreaker: one-sided Plate form: triangular Typical application: Turning System components: insert, matching outside holder or boring bar, backing pad, clamping set, spare screws FAQ What materials is this insert suitable for? The TCMT090202 in AH725 grade is intended primarily for Stahl and rostfreier Stahl, offering a universal, fracture-resistant solution across common turning tasks. What does the AH725 designation mean for performance? AH725 denotes a PVD-coated carbide grade engineered for good edge stability and broad material coverage; the result is reliable cutting performance and extended edge life in mixed-production scenarios. How does the one-sided chipbreaker affect machining? The one-sided chipbreaker on this insert promotes controlled chip formation and evacuation, which helps maintain surface quality and reduces the risk of chip-related interruptions during turning. Is the insert compatible with standard ISO holders? Yes, the TCMT090202 follows ISO indexable insert standards and requires a matching TCMT-compatible outside holder or boring bar, plus the appropriate backing pad and clamping set. What are the mounting specifics for secure clamping? The insert features a cylindrical hole with a one-sided countersink (40°–60°) for secure, repeatable fastening in ISO-compatible clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com