TCGT 110204 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of SH725 coating performance, precise 60° triangular geometry, and simple holder compatibility for consistent turning productivity; order genuine Tungaloy inserts through Metav Werkzeuge or request expert advice from our consultants. TCGT 110204 SH725 indexable turning insert — coated carbide, 60° triangular geometry, Tungaloy The TCGT110204 SH725 is an ISO‑standard triangular indexable insert designed for external and internal turning, offering robust edge stability for variable engagement conditions. Coated carbide grade SH725 ISO triangle 60° geometry 0.4 mm corner radius Cylindrical hole with countersink Consistent performance through a tough, edge‑stable grade The insert’s SH725 coated grade combines toughness with a stable cutting edge to reduce chipping and unexpected tool changes during turning. As a coated carbide product, it balances wear resistance and fracture toughness, making it particularly suitable for smaller toolholders or operations with varying depths of cut. This translates into fewer interruptions, predictable tool life and a better cost per component when compared with uncoated alternatives. The rational choice of a tough coating means higher process reliability and less unplanned downtime. ISO compliance and straightforward integration into tooling systems ISO standardisation ensures the insert fits holders when the geometry, relief angle, tolerance class, mounting and thickness match. The triangular form with a 60° included angle and a central mounting hole (cylindrical with a single‑sided countersink) allows quick indexing and secure clamping in a compatible seat. Technical compatibility depends on form and dimensions rather than brand alone, so confirming holder specifications against the insert’s size and thickness avoids mismatches and secures repeatable clamping and cutting performance with minimal setup effort. Geometry and chip control for improved surface quality and life A 0.4 mm corner radius and a plate thickness of 2.38 mm provide a balance between edge strength and achievable surface finish; the modest radius supports good stability without compromising detail on turned profiles. The one‑sided chipbreaker promotes controlled chip formation for many common materials, aiding evacuation and protecting the cutting edge. Together, these geometric features contribute to steady material removal rates, consistent surface roughness and extended intervals between indexings or insert replacements. Technical advice is available from Metav Werkzeuge for selecting the optimal chipbreaker and insert grade for specific steels or alloys. For ordering or detailed application guidance on genuine Tungaloy indexable inserts such as the TCGT110204 SH725, contact Metav Werkzeuge for specialised advice at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6737037-Tungaloy Manufacturer SKU: TUN6737037 Manufacturer article number: 6737037 Model series: ISO-Drehwendeschneidplatten Material: carbide Core dimensions Insert size: 11 mm Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 60° Features & application Triangular insert, one-sided chipbreaker Coating/sort: SH725 (coated carbide) Hole: cylindrical hole with single-sided countersink (40°–60°) Suitable for external and internal turning ISO-standard; compatibility depends on holder geometry, relief angle, tolerance class, mounting, size and thickness FAQ What materials is this insert suitable for? The SH725‑grade coated carbide insert is formulated for a broad range of turning tasks; the TCGT110204 SH725 insert performs well in general steel machining and where a tough, edge‑stable grade is required. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius improves edge strength and contributes to consistent surface finish; for finer detail or light finishing cuts a smaller radius would be advised, while larger radii enhance edge durability. Is the insert compatible with existing ISO holders? Compatibility depends on holder form, relief angle, tolerance class, mounting method, size and thickness; the ISO designation of the insert facilitates selection but confirming holder dimensions ensures correct fit. What is the benefit of the one‑sided chipbreaker? The one‑sided chipbreaker on this triangular insert improves chip control for many turning operations, aiding evacuation and protecting the cutting edge to support steady cutting conditions. Which SKU identifies this product for ordering? Order using SKU 6737037-Tungaloy or Manufacturer SKU TUN6737037 to ensure the TCGT110204 SH725 Tungaloy indexable insert is supplied as specified. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110204 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of SH725 coated carbide and a 0.4 mm nose radius for stable cutting performance and fine surface finish; compatibility with ISO holders ensures straightforward integration in standard turning setups. Order the insert directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. TCGT 110204 SH725 ISO turning insert — triangular 60°, coated carbide — Tungaloy A TCGT110204 SH725 ISO-standard indexable insert designed for external and internal turning, offering robust cutting-edge stability for variable engagement conditions. Coated carbide grade SH725 60° triangular geometry for versatile turning 0.4 mm nose radius for fine surface finish Cylindrical hole with single-sided countersink Maximum process reliability through material and geometry The insert combines a SH725 coated carbide substrate with a 60° triangular form to deliver repeatable cutting performance in turning operations. The coating and carbide core provide improved wear resistance and edge strength, which is particularly advantageous when working with interrupted cuts or variable engagement. The relatively small 0.4 mm nose radius enables accurate detail work and a consistent surface finish while keeping cutting forces manageable. These design attributes translate into fewer tool changes and steadier cycle times on the shop floor. Predictable compatibility and secure clamping for trouble-free setup Compatibility with holders is determined by form, clearance angle, tolerance class, clamping method, size and thickness; the insert’s ISO-standard designation simplifies selection of a matching external holder or boring bar. The cylindrical hole with a single-sided countersink (40°–60°) ensures firm seating and repeatable orientation when secured with the correct screw and clamp assembly. Using the appropriate underlay/support and clamping set reduces vibration and improves tool life, so that setup time is reduced and machining remains consistent across batches. Practical advantage: suited to small tools and changing conditions The SH725 grade is engineered as a tough, edge-stable carbide suited for turning, especially with smaller tooling or when cutting conditions fluctuate. The single-sided chipbreaker promotes controlled chip formation when matched to the workpiece material and machining approach. For shops that switch frequently between components or face alternations in cutting depth, the combination of this grade and geometry supports sustained productivity, limiting downtime and contributing to predictable part quality. How the insert supports process decisions Selecting the correct chipbreaker and grade is essential: the SH725 option favours durability and chipping resistance, which can reduce scrap and rework in mixed-production environments. The insert’s 2.38 mm thickness and 11 mm size provide dimensional stability in the pocket, while the 7° relief angle assists in reducing rubbing and heat build-up. These specifications should be weighed against toolholder rigidity and workpiece material to establish optimal speeds and feeds for the desired economy and surface integrity. For specific application advice on Tungaloy SH725 inserts or to confirm fitment with existing holders, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will assist with the right chipbreaker and grade for the job Technical Data Article number: 6737144 Manufacturer article number: 6737144 Manufacturer SKU: TUN6737144 SKU: 6737144-Tungaloy Brand: Tungaloy ISO designation: TCGT110204 Core specifications Insert size: 11 mm Thickness: 2.38 mm Nose radius: 0.4 mm Included angle: 60° Relief/clearance angle: 7° Features & applications Coated carbide grade SH725 Single-sided chipbreaker Cylindrical hole with single-sided countersink (40°–60°) Triangular insert form Application: turning (external and internal) Compatibility determined by form, clearance, tolerance, clamping, size and thickness Material: carbide FAQ What materials is this insert suited for? The SH725 grade is a tough, edge-stable coated carbide developed for turning a broad range of materials; match the chipbreaker and parameters to the specific workpiece for best results. How is the insert fixed to the holder? The insert uses a cylindrical hole with a single-sided countersink and is secured with the appropriate screw and clamp or clamping kit; correct seating ensures repeatable orientation and stable cutting. Which holders are compatible with this ISO designation? Holders that accept TCGT110204 geometry—matching form, size, thickness and tolerance class—will be compatible; verify clearance angle and clamping method before mounting. What advantages does the 0.4 mm nose radius provide? A 0.4 mm nose radius offers improved detail capability and consistent surface finish while limiting cutting forces, making it suitable for fine turning and finishing passes. Can this insert handle interrupted cuts or variable engagement? Yes; the SH725 coated carbide provides enhanced edge stability and wear resistance, supporting interrupted cuts and fluctuating engagement conditions when toolholding is rigid. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110204 SH730 Wendeplatten - Tungaloy
Combining the SH730 coated grade with a precise 0.4 mm corner radius yields a balance of stable cutting and extended tool life for general turning operations; order directly via Metav Werkzeuge or consult the specialists for grade selection and holder matching. TCGT 110204 SH730 Tungaloy indexable insert for turning, triangle 60° TCGT110204 SH730 is an ISO‑compliant, triangular indexable insert designed for reliable external and internal turning in varying engagement conditions. Coated cemented carbide SH730 grade 60° triangle form for versatile turning 0.4 mm corner radius for balanced strength and finish Cylindrical hole with single‑sided countersink Stable chip control for dependable cycle times The combination of the SH730 cutting grade and coated cemented carbide substrate provides a proven compromise between toughness and edge stability. With a single-sided chipbreaker engineered for turning, the insert promotes predictable chip formation and reduces the risk of clogging under interrupted cuts. Such controlled chips contribute to consistent cycle times and fewer tool changes in batch production, supporting a measurable improvement in machining efficiency. Easy integration with standard turning holders The triangular 60° geometry and a cylindrical hole with one-sided countersink enable straightforward clamping in ISO‑compatible toolholders. Tolerances such as a 7° relief angle and a 2.38 mm plate thickness ensure repeatable seating and axial stability on compatible holders and boring bars. An insert diameter of 11 mm and the 0.4 mm corner radius permit both medium‑depth finishing and light roughing, reducing the need for multiple tool variants across similar operations. Robust performance across changing engagement conditions Designed as a tougher, edge‑stable grade for turning, the insert performs well when cutting parameters vary or when smaller tools are in use. The geometry and coating combination deliver reliable wear behaviour and predictable tool life under moderate cutting speeds, making the component suitable for mixed material schedules. The TCGT110204 format supports quick indexability, helping to maintain part quality while keeping downtime for tool changes to a minimum. For application advice and to ensure the ideal insert and holder combination for specific turning tasks, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for expert, application‑specific guidance. Technical data Article number: 6854028 Manufacturer SKU: TUN6854028 Label: TCGT110204 SH730 Tungaloy‑Wendeplatte Manufacturer article number: 6854028 Dimensions & core data Corner radius: 0.4 mm Included angle: 60° Relief angle: 7° Plate thickness: 2.38 mm Inscribed circle / size: 11 mm Materials & special features Coated cemented carbide, grade SH730 Triangle form, indexable insert Single‑sided chipbreaker With cylindrical hole and single‑sided countersink (40°–60°) Application: turning ISO‑compliant insert FAQ What holder types are compatible with this triangular insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening arrangement, size and thickness; the TCGT110204 SH730 insert is designed for ISO‑compliant triangular turning holders. Which materials suit the SH730 grade best? The SH730 grade is a tougher, edge‑stable coated carbide suitable for a broad range of steels and mixed turning tasks where stability and repeatable edge life are priorities. How should the insert be mounted to ensure repeatability? Secure seating on an ISO‑compliant triangular pocket with correct clamp torque and clean seating surfaces ensures repeatable positioning and the expected tool life for the TCGT110204 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110204 TH10 Wendeplatten - Tungaloy
Take advantage of the uncoated carbide TH10 grade and the precise 0.4 mm corner radius to achieve low cutting forces and clean surface finishes in non-ferrous turning operations; compatibility with ISO holders is ensured by standardised form, relief angle and thickness, offering straightforward integration into existing tool systems. Order the TCGT110204 TH10 insert directly via Metav Werkzeuge or ask our consultants for application advice. TCGT110204 TH10 Tungaloy turning insert — ISO triangular indexable insert, 0.4 mm radius TCGT110204 TH10 is a triangular ISO indexable insert designed for general-purpose external and internal turning, especially suited to non-ferrous materials and light finishing cuts Uncoated TH10 grade for low cutting forces Triangular 60° geometry with 0.4 mm radius Single-sided chipbreaker for clean surfaces With hole and one-sided countersink for secure clamping Reliable chip control for non-ferrous turning The triangular ISO indexable insert offers a balanced geometry that reduces vibration and delivers a consistent cutting action in non-ferrous materials. The TH10 uncoated carbide grade is optimised for applications where an uncoated edge reduces built-up edge and supports lower cutting forces, which in turn leads to improved surface quality and longer tool life under the right conditions. The single-sided chipbreaker is designed to shape chips effectively during light to medium cuts, so the machining process stays predictable and efficient. Reduced setup complexity and secure clamping Compatibility is determined by form, 7° relief angle, tolerance class, clamping method, size and thickness—factors that make mounting straightforward in matched ISO holders or boring bars. The insert includes a central hole with a cylindrical bore and a one-sided countersink (40°–60°), enabling positive seating and repeatable positioning when used with the proper shim and clamp set. This systematic approach to tool assembly reduces setup time and minimises the risk of incorrect fitment in production environments. Geometry tuned for finishing and finishing feeds With a nominal size of 11 and a thickness of 2.38 mm, the insert’s 60° included angle and 0.4 mm corner radius support fine finishing passes while still permitting modest stock removal when required. The compact thickness and precise tolerances allow stable clamping and accurate repeatability, which benefits part-to-part consistency. Where surface finish is critical, the uncoated cutting edge helps produce cleaner contact between tool and workpiece, especially on softer non-ferrous alloys. System compatibility and practical implementation The insert is intended to be used as part of a complete system: ISO insert, matched external holder or boring bar, backing/shim and clamp set, plus replacement screws. Selecting the correct chipbreaker and grade for the specific workpiece material and machining conditions will yield the best balance between productivity and finish quality. The uncoated carbide composition provides a predictable cutting response and is particularly useful where adhesion-prone materials can otherwise cause edge build-up. For application-specific recommendations or to secure supply of Tungaloy TH10 inserts, contact Metav Werkzeuge—technical consultation and stock information available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6807675 Manufacturer SKU: TUN6807675 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall ISO designation: TCGT110204 Shape: triangular Facts Size: 11 Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 60° Special features Grade: TH10 (uncoated carbide) Chipbreaker: single-sided Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning System components: insert, outer holder/boring bar, backing/shim and clamp set, replacement screws FAQ What materials is this insert optimised for? The TCGT110204 TH10 insert is optimised for non-ferrous materials and applications where an uncoated edge supports low cutting forces and clean finishes. How does the insert secure to the toolholder? The insert uses a central cylindrical hole with a one-sided countersink (40°–60°) for positive seating; combined with the correct shim and clamp set, it ensures repeatable, secure clamping. Can this insert be used for internal turning as well as external turning? Yes, the triangular geometry and ISO standard form make the insert suitable for both internal and external turning operations when paired with the appropriate boring bar or holder. What benefit does the TH10 uncoated grade provide? The TH10 uncoated carbide grade reduces built-up edge on adhesion-prone materials, lowering cutting forces and improving surface quality in finishing and light machining tasks. Which holders are compatible with this insert? Compatibility depends on matching the insert’s form, relief angle, tolerance class, size and thickness to the holder specification; use ISO-compatible external holders or boring bars designed for triangular inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110208 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of fine finishing, low cutting forces and ISO compatibility for reliable turning performance; order the Tungaloy insert directly via Metav Werkzeuge or consult our specialists for technical guidance. TCGT110208 NS9530 ISO triangular turning insert — Tungaloy, uncoated cermet, 7° clearance The TCGT110208 NS9530 is an ISO triangular turning insert engineered for fine finishing on steel, offering a sharp cutting edge and a low-force cutting action suitable for continuous cuts and small depths of cut. Uncoated cermet grade NS9530 for fine finishing Sharp cutting edge for low cutting forces ISO triangular insert, 11 mm cutting size Single-sided chipbreaker with centre hole Achieve superior surface finish with low cutting effort The uncoated cermet grade NS9530 delivers a consistently sharp cutting edge that reduces cutting forces and helps produce improved surface quality on steel components. Cermet combines ceramic hardness with metal-like toughness, providing stability in continuous cutting conditions; this means fewer vibration-induced marks and more predictable part quality. The 0.8 mm corner radius balances edge strength and finishing capability, while the sharp geometry is optimised for light passes and small depths of cut — a clear benefit when tight surface tolerances are required. Reliable mounting and ISO conformity for process security Compatibility with toolholders is determined by form, relief angle, tolerance class, clamping method, size and thickness; the triangular ISO form and standard dimensions simplify selection of a matching holder. The plate’s 7° clearance angle and the cylindrical hole with one-sided countersink (40°–60°) ensure secure clamping and repeatable positioning, which supports consistent machining results and reduces setup time. For production environments where reproducibility matters, the standardised geometry contributes directly to process security and predictable tool life. Practical advantages for workshop productivity The single-sided chipbreaker is matched to the insert grade and application, helping to control chip formation during continuous turning operations. With an insert thickness of 2.38 mm and an 11 mm size, the design offers a compact yet robust cutting edge for finishing passes. As an uncoated grade, the insert excels where a sharp, wear-resistant edge is needed and where coating could raise cutting temperatures or alter the chipflow in light finishing tasks. Choosing this insert supports efficient machining cycles and optimised part quality with minimal secondary finishing. For proven fine-finishing performance with the Tungaloy NS9530 grade, contact Metav Werkzeuge for ordering or technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6997949 SKU: 6997949-Tungaloy Designation: TCGT110208 Name: TCGT110208 NS9530 Tungaloy insert Core specifications Corner radius: 0.8 mm Insert size: 11 mm Insert thickness: 2.38 mm Clearance angle: 7° Included angle: 60° Hole style: cylindrical hole + one-sided countersink (40°–60°) Features & materials Uncoated cermet grade NS9530 Single-sided chipbreaker ISO triangular plate For turning; finishing on steel Compatible with ISO toolholders (form, size, thickness) Material: carbide FAQ What is the main application of this insert? The TCGT110208 NS9530 insert from Tungaloy is designed primarily for turning operations, specialising in fine finishing of steel where low cutting forces and a sharp edge are required. Can the TCGT110208 NS9530 be used for roughing passes? This insert grade is a finishing type optimised for continuous cuts and small depths of cut; heavy roughing is not the intended application for the Tungaloy NS9530 specification. Which holders are compatible with this ISO triangular insert? Compatibility is determined by form, relief angle, tolerance class, clamping method, size and thickness; matching an ISO triangular holder to the TCGT110208 configuration ensures secure mounting and repeatable positioning. Does the insert include a chipbreaker and what is its effect? Yes — the plate has a single-sided chipbreaker which, together with the uncoated cermet grade, helps control chip formation during finishing cuts for improved surface quality. What is the manufacturer SKU for ordering reference? Order references include the manufacturer article number 6997949 and the SKU 6997949-Tungaloy for the Tungaloy TCGT110208 NS9530 triangular insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110208 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected: the product is described both as cemented carbide (Hartmetall) and as an uncoated cermet (NS9530), which are distinct cutting-material types, leading to potential confusion and misrepresentation of the product's actual specifications; therefore, it is crucial to clarify and provide corrected material information to ensure that a complete, accurate, and reliable product description can be generated, avoiding any misunderstandings or errors that could arise from conflicting details and ensuring that customers and stakeholders have access to precise and consistent data regarding the product's composition and intended applications.
TCGT 110300 J740 Wendeplatten - Tungaloy
Combining ISO conformity with the J740 Tungaloy grade and a 7° relief, this triangular carbide insert delivers consistent cutting performance and dependable edge life for turning operations; order the TCGT110300 directly via Metav Werkzeuge or consult our specialists for application-specific selection. TCGT 110300 J740 Tungaloy — ISO turning indexable insert, triangular 11 mm, 7° relief A TCGT 110300 J740 Tungaloy ISO-format indexable insert for external and internal turning, engineered to provide stable chip control and robust edge stability in demanding machining tasks. ISO‑format triangular insert 11 mm J740 Tungaloy carbide grade 7° relief for reliable clearance Cylindrical hole with 40°–60° countersink Precision and predictable performance for turning operations The triangular indexable insert is manufactured to ISO dimensions, ensuring repeatable positioning and compatibility with standard holders. The 11 mm inscribed circle and 3.18 mm thickness give a stable seating in the pocket, reducing chatter and improving surface finish. ISO conformity simplifies tool inventory and shortens setup time in production environments where predictable outcomes are crucial, enabling higher process reliability and lower scrap rates. Balanced J740 grade for wear resistance and edge stability The J740 cutting grade from Tungaloy combines wear resistance with sufficient toughness to withstand interrupted cuts and variable feeds. This balance extends effective tool life and reduces frequency of insert changes, which in turn lowers downtime and tooling costs. For users less familiar with grades: J740 is optimised to maintain a robust cutting edge across a wide material range typically encountered in general turning. Mounting, geometry and practical compatibility guidance The insert features a cylindrical hole with a single‑sided countersink (40°–60°), which secures consistent clamping force and correct axial positioning when used with compatible clamping screws and seats. The 7° clearance angle prevents rubbing while maintaining sufficient support behind the cutting edge. Compatibility with a specific holder depends on form, relief, tolerance class, clamping method and insert thickness; selecting the correct combination ensures repeatable clamping and predictable cutting behaviour. Chip control and application considerations A one‑sided chipbreaker geometry offers controlled chip formation for many turning tasks, aiding evacuation and reducing heat build‑up at the cutting zone. When paired with appropriate cutting data and coolant strategy, the insert helps to maintain surface integrity and tool life. For efficient machining, choose feeds and speeds that match workpiece material and machine rigidity; the insert is suitable for both external and internal turning where ISO triangular inserts are recommended. For reliable turning with the Tungaloy J740 grade and to ensure correct holder compatibility, contact Metav Werkzeuge for ordering and tailored advice — info@metav-werkzeuge.com or +49 2822 7131930; quote SKU TUN6807684 when enquiring Technical data Article number: 6807684 SKU: 6807684-Tungaloy Manufacturer SKU: TUN6807684 Brand: Tungaloy Model series: ISO turning indexable plates Facts ISO designation: 110300 Insert form: triangle Inscribed circle: 11 mm Thickness: 3.18 mm Relief angle: 7° Included angle: 60° Special features Cutting grade: J740 (Tungaloy carbide) Hole: with cylindrical hole and single‑sided countersink 40°–60° Chipbreaker: one‑sided Intended use: external and internal turning FAQ What materials is this insert suitable for? The J740 grade is a versatile Tungaloy carbide designed for general turning applications; the insert suits a broad range of materials where a balanced wear resistance and toughness are required. How is the insert secured in the holder? The insert uses a cylindrical hole with a single‑sided countersink (40°–60°); correct clamping hardware and seat geometry ensure stable fixation for repeatable cutting. Can this insert be used for internal boring as well as external turning? Yes, the ISO triangular format and chipbreaker design make the insert appropriate for both external and internal turning tasks when matched with a compatible holder. What advantage does the 7° relief provide? The 7° relief angle prevents flank rubbing while maintaining solid edge support, improving surface finish and reducing undesirable heat generation at the cutting zone. Which reference should be quoted when ordering or requesting technical advice? Please reference the article designation TCGT110300 J740 and SKU TUN6807684 when seeking precise ordering or application guidance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110300 J740 Wendeplatten - Tungaloy
Benefit from the combination of a wear‑resistant Tungaloy grade and a compact 60° triangle geometry for consistent chip control and predictable tool life; the 7° clearance reduces rubbing for efficient turning. Order the TCGT110300 J740 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TCGT110300 J740 Tungaloy – ISO triangle turning insert, 60° geometry, 7° clearance (Tungaloy) A TCGT110300 J740 Tungaloy ISO turning insert designed for external and internal turning with a single‑sided chipbreaker and cylindrical hole with one‑side countersink ISO‑standard triangle insert J740 grade for wear resistance 7° clearance angle for secure cutting Cylindrical hole with 40°–60° countersink Predictable fit and faster set‑up for ISO tooling systems The ISO‑standard form of this triangle insert ensures immediate compatibility with matching holders when the correct form, clearance, tolerance class, fixing method, size and thickness are observed. The defined 7° clearance minimises flank contact and reduces thermal load on the tool, which leads to a more stable cutting process and fewer unexpected interruptions. For production environments that demand repeatable changeovers, the standardised geometry shortens set‑up time and supports sustained cycle rates. Material behaviour and why J740 is a practical choice The Tungaloy grade J740 brings a balanced combination of wear resistance and toughness tailored for turning operations. Manufactured from carbide, the grade is selected to maintain edge integrity under intermittent and continuous cuts, supporting component quality and tool life. This balance reduces the frequency of index changes and contributes to consistent surface finish, making the insert suitable where dependable machining performance and process stability are priorities. Geometry and chip control for cleaner, safer cuts The triangle shape with a 60° included angle offers rigidity and multiple indexable edges, while the single‑sided chipbreaker promotes efficient chip formation and evacuation in a range of turning tasks. The insert’s 3.18 mm thickness and size 11 profile provide mechanical stability during heavier cuts, and the cylindrical hole with a 40°–60° countersink secures reliable clamping. Together these features translate into improved process efficiency and lower risk of built‑up edge or unstable chips. System integration and application notes for consistent results When integrating this insert into a tooling set, select holders and clamping components that match the ISO designation and the insert’s dimensions to preserve cutting geometry and repeatability. The insert functions for both external and internal turning when mounted in the appropriate holder; choosing the correct chipbreaker and adapting feed/speed to the workpiece material will unlock the full potential of the grade. For complex setups or material‑specific guidance, technical consultation is recommended to optimise cycle times and surface quality. For application advice on the Tungaloy J740 grade and to reserve stock of the TCGT110300 insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific turning tasks. Technical Data Article number: 6807681 SKU: 6807681-Tungaloy Manufacturer SKU: TUN6807681 Model series: ISO‑Drehwendeschneidplatten Application: Turning Material: Carbide Core data Insert designation: TCGT110300 Included angle: 60° Clearance angle: 7° Thickness: 3.18 mm Size: 11 Hole: with hole Countersink angle: 40°–60° Special features Triangle shape Single‑sided chipbreaker Cylindrical hole with one‑side countersink Tungaloy grade J740 Carbide material ISO‑standard insert Suitable for external and internal turning Compatibility defined by form, clearance, tolerance, fixing, size and thickness FAQ What turning operations is this insert suited for? The TCGT110300 J740 insert is designed for both external and internal turning operations and works where a 60° triangle geometry and single‑sided chipbreaker are appropriate. Which holder characteristics ensure correct assembly? Compatibility is achieved when the holder matches the insert’s form, clearance angle, tolerance class, fixing method, size and thickness; follow the holder manufacturer’s specifications for secure clamping of the TCGT110300 insert. What is the hole and countersink specification? The insert features a cylindrical hole with a one‑side countersink specified at 40°–60°, enabling correct seating and stable clamping in compatible toolholders. How does the J740 grade affect tool life and surface quality? The J740 grade offers a balanced combination of wear resistance and toughness, which supports longer edge life and consistent surface finish under varying cutting conditions. Is there a coating specified for this insert? No coating is specified in the product data for the TCGT110300 J740 insert Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCGT 110300 SH7025 Wendeplatten - Tungaloy
The combination of a SH7025 coated carbide grade, ISO-compliant TCGT110300 geometry and a one-sided chipbreaker delivers stable cutting edges and predictable chip control for efficient turning operations — order directly via Metav Werkzeuge or consult the technical team for application-specific advice. TCGT110300 SH7025 ISO turning insert by Tungaloy — triangular 11 mm, 7° relief The TCGT110300 SH7025 is an ISO triangular indexable insert designed for external and internal turning, featuring a one-sided chipbreaker and a cylindrical hole with single-side countersink for secure clamping ISO triangular insert, 11 mm edge length SH7025 coated carbide for stable edges 7° relief for secure cutting geometry Cylindrical hole with 40°–60° countersink Consistent edge stability for demanding turning tasks The SH7025 grade is a coated carbide formulation developed for toughness and cutting-edge stability, making it particularly suitable where engagement conditions change or where smaller tooling is required. With a one-sided chipbreaker, the insert promotes controlled chip formation and evacuation, which reduces the likelihood of chatter and tool damage. As a result, shops experience fewer unplanned tool changes and more consistent surface finishes, while the robust edge behaviour contributes directly to extended tool life and predictable process windows. Fast indexability and secure clamping reduce downtime As an ISO insert, the part fits ISO-standardised holders when form, relief angle, tolerance class, clamping style, size and thickness match — a benefit for modular tooling systems and quick changeovers. The 7° relief and triangular geometry provide three usable cutting corners per index, offering cost-effective reconditioning of the cutting edge during service life. The insert’s cylindrical hole with a single-side countersink (40°–60°) ensures reliable seating and repeatable clamping forces, which supports machining stability and reduces the need for frequent fixture checks. Versatile productivity for mixed-production environments Selecting the correct chipbreaker and grade for the application enables a balance between material removal rate and surface quality. The combination of the SH7025 grade and the insert’s geometry is aimed at increasing overall productivity in mixed-production or variable-engagement turning scenarios. Fewer interruptions for tool changes and predictable wear behaviour translate into lower overall machining costs and improved workflow. If there is any uncertainty about holder compatibility or suitability for a specific material or cycle, Metav Werkzeuge can provide technical guidance and additional data to support the choice. For tailored recommendations on Tungaloy SH7025 inserts and holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to request application support and documentation Technical data Article number: 6967548 Manufacturer SKU: TUN6967548 Label: TCGT110300 SH7025 Tungaloy-Wendeplatte Manufacturer article number: 6967548 Facts Edge length: 11 mm Thickness: 3.18 mm Relief angle: 7° Included angle: 60° ISO designation: 110300 Special features Grade: SH7025 Material: carbide Shape: triangular Chipbreaker: one-sided Hole: cylindrical with single-side countersink (40°–60°) Application: turning FAQ What cutting edges are available on this triangular insert? The TCGT110300 SH7025 insert provides three indexable cutting corners thanks to its triangular geometry, allowing effective rotation of the cutting edge when wear occurs. How does the SH7025 grade influence performance? The SH7025 coated carbide delivers a tough, edge-stable cutting behaviour particularly suited to turning operations with variable engagement, resulting in reliable tool life and consistent finishes for the TCGT110300 insert from Tungaloy. Is the insert compatible with all ISO holders? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; the ISO designation 110300 identifies the geometric standard for matching appropriate holders. What is the purpose of the single-side countersunk hole? The cylindrical hole with a single-side countersink (40°–60°) on the insert improves seating and repeatability in the clamping arrangement, supporting stable cutting conditions and secure fixation. Which applications suit this insert best? This insert is intended for external and internal turning where stable chip control and edge toughness are required, especially when smaller tools or fluctuating engagement conditions are part of the process. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110300 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of SH725 coated carbide for edge stability and the ISO‑standard triangular format for straightforward holder compatibility; this reduces tool changes and supports a smooth turning process. Order original Tungaloy inserts directly via Metav Werkzeuge or consult our technical team for holder matching and application advice. TCGT110300 SH725 turning insert — ISO triangular 11 mm, 7° clearance (Tungaloy) The TCGT110300 SH725 is an ISO‑standard triangular turning insert designed for external and internal turning, offering a tough, edge‑stable grade suitable for variable engagement conditions. ISO triangular insert, 11 mm edge length SH725 coated carbide for tough cutting 7° clearance for reliable tool contact Cylindrical hole with single‑side countersink Consistent performance under variable cutting conditions The SH725 grade is a coated carbide formulation developed for edge stability and toughness, which translates into fewer interruptions for insert changes and more consistent cycle times. With a one‑sided chipbreaker, the geometry promotes controlled chip formation in typical turning operations, reducing the risk of irregular chip flow. This results in improved process reliability and supports more predictable productivity in batch and single‑piece production. Straightforward mounting and ISO compatibility for faster setup Compatibility is ensured by ISO‑conformant dimensions and by design parameters such as form, 7° clearance, tolerance class, fastening method and plate thickness. The insert features a cylindrical hole with a single‑side countersink (40°–60°), which secures the seat and prevents rotation when clamped. These features enable quick integration into a matching external holder or boring bar, shortening setup time and simplifying inventory management for standard tool systems. Compact triangular geometry for cost‑effective indexing The triangular shape with an 11 mm edge length and 3.18 mm thickness offers three usable cutting edges per index, increasing value per insert compared with single‑edge solutions. The 60° included angle supports balanced cutting forces and is especially suitable for small‑to‑medium depth turning where rigidity of the tool assembly is a limiting factor. This geometry is an economical choice when multiple indexed edges are desired without sacrificing stability. System guidance and practical application notes The insert forms part of a typical ISO turning system: the ISO‑conformant insert, a compatible external holder or boring bar, an appropriate shim/clamp set and replacement screws. Selection of the correct chipbreaker and the SH725 grade should be matched to the workpiece material, cutting data and machine rigidity to obtain the intended tool life and surface finish. For assistance with holder compatibility or parameter selection, Metav Werkzeuge’s technical advisors are available to provide application‑focused recommendations. Contact Metav Werkzeuge today for tailored advice on integrating Tungaloy turning inserts into existing tooling systems or to request application support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6737038 Manufacturer SKU: TUN6737038 Model series: ISO‑turning inserts Material: coated carbide Grade: SH725 Facts Edge length: 11 mm Plate thickness: 3.18 mm Clearance: 7° Included angle: 60° Mounting: with hole; cylindrical hole + single‑side countersink (40°–60°) Special features Triangular plate form One‑sided chipbreaker ISO‑standard designation TCGT110300 Intended application: turning (external and internal) FAQ What holders are compatible with this triangular insert? Compatibility depends on holder form, tolerance class, fastening and plate thickness; the TCGT110300 SH725 insert fits holders designed for ISO TCGT110300 inserts and secures via the cylindrical hole with single‑side countersink. Which cutting tasks is this insert designed for? The insert is designed for turning applications, both external and internal, where a tough, edge‑stable grade is required; the SH725 coated carbide grade supports stable performance under varying engagement conditions. How many cutting edges are available per insert? The triangular geometry provides three indexable cutting edges per plate, allowing economical indexing and extended service life before replacement. What is the purpose of the countersunk hole? The cylindrical hole with a single‑side countersink (40°–60°) ensures secure clamping and prevents insert rotation, improving mounting stability for reliable cutting performance. Is the insert suitable for small‑diameter toolholders? The SH725 grade and compact dimensions are particularly suitable for smaller tools or operations with changing engagement, but holder rigidity and machine stability should be considered when specifying the tool system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCGT 110300 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of a coated carbide SH725 grade and precise geometry for more consistent cutting, reduced setup time and reliable results in turning operations; order directly via Metav Werkzeuge or consult our technical advisors for application support. TCGT110300 SH725 Tungaloy insert for turning — triangular 60° with 7° relief The TCGT110300 SH725 Tungaloy insert is a coated carbide, ISO-standard indexable insert designed for external and internal turning where stable cutting edges and predictable chip control are required. Coated carbide grade SH725 7° relief for stable cutting Cylindrical hole with 40°–60° countersink 3.18 mm thickness, 60° triangular form Stable edge life through a purpose-engineered carbide grade The SH725 coating and substrate combination is formulated to deliver edge stability and resistance against chipping under varying engagement conditions. As a coated carbide insert, the grade aims to balance toughness and wear resistance so that machining interruptions are minimised. This makes the insert especially suitable for smaller toolholders and operations where cutting conditions can fluctuate; the result is longer effective tool life and fewer insert changes per shift. Geometry that simplifies mounting and improves chip control The triangular 60° form with a 7° relief ensures predictable seating and reliable contact in ISO-compatible toolholders. The cylindrical hole with a 40°–60° countersink guarantees secure clamping and repeatable positioning, while the one-sided chipbreaker promotes defined chip formation for many general turning tasks. Together, these features reduce vibration, enhance surface finish and make indexable changes quicker, improving overall process efficiency. Practical compatibility and straightforward system integration As part of an ISO-indexed insert family, the plate integrates into established systems: matching ISO toolholders, appropriate shims and screws enable a complete cutting assembly. The 3.18 mm thickness gives mechanical stiffness for stable cuts without excessive overhang, and the insert size correlates with standard holder pockets to ensure interchangeability. For external and internal turning applications, this configuration supports a wide range of steels and common workshop materials encountered in everyday production. Select the right chip former and set-up for best results Choosing the correct chipbreaker and clamping practice is crucial for maximising productivity with this insert. The one-sided breaker is effective for many turning tasks, but matching the breaker geometry to the workpiece material and depth of cut will further reduce cycle times and improve surface integrity. For tailored recommendations on feeds, speeds and holder selection, rely on application data and supply-chain support to avoid trial-and-error set-up and shorten ramp-up time. For application advice, compatibility checks or to secure Tungaloy quality for production turning, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical guidance and order support. Technical Data Article number: 6737039 Manufacturer SKU: TUN6737039 Vendor SKU: 6737039-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TCGT110300 SH725 Tungaloy-Wendeplatte Facts Included angle: 60° Relief angle: 7° Thickness: 3.18 mm Plate size: 11 mm Special features Coated carbide material (Hartmetall) Grade: SH725 Triangular plate form Cylindrical hole with one-sided countersink (40°–60°) One-sided chipbreaker ISO-indexed insert for turning FAQ What materials is this insert suitable for? The SH725-coated carbide insert is intended for general turning tasks and offers a balance of toughness and wear resistance suitable for a broad range of steels and typical workshop materials. How does the 7° relief affect performance? A 7° relief provides clearance to reduce rubbing while maintaining toolholder support; it helps to preserve the cutting edge and supports consistent surface finish during turning. Is the insert compatible with standard ISO toolholders? Yes, the insert follows ISO indexing standards and the combination of form, thickness and hole/countersink makes it compatible with matching ISO toolholders and clamping sets. What advantages does the one-sided chipbreaker provide? The one-sided chipbreaker promotes controlled chip formation in many turning applications, aiding evacuation and reducing the risk of built-up edge on the cutting face. Which part number should be referenced when ordering? Reference the article number 6737039 or manufacturer SKU TUN6737039 to ensure the correct TCGT110300 SH725 Tungaloy insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110300 TH10 Wendeplatten - Tungaloy
Taking advantage of its ISO-conform triangular form, TH10 uncoated carbide and 7° clearance, this insert delivers stable seating, low cutting forces and consistently clean surfaces in turning operations; order the Tungaloy TCGT110300 directly via Metav Werkzeuge or consult the advisers for application support. TCGT 110300 TH10 Tungaloy turning insert — uncoated carbide, 60° triangular A Tungaloy TCGT110300 TH10 ISO insert designed for external and internal turning, optimised for non-ferrous materials and applications requiring low cutting forces and clean surface finish ISO triangular 11-size insert Uncoated carbide TH10 for low cutting forces 7° clearance for secure seating Cylindrical hole with countersink (40°–60°) Consistent seating and predictable cutting geometry for reliable production The triangular 60° insert form follows the ISO standard for indexable turning tips, providing a repeatable seating position and predictable cutting geometry in both external and internal turning. This format enables straightforward indexation and reduces downtime during tool changes, while the defined tolerance classes and rake/clearance interplay ensure compatibility with a wide range of holders and boring bars. The described fit characteristics support stable chip formation and steady process behaviour, contributing to consistent part quality and reduced scrap rates. Low cutting forces and clean finishes for non-ferrous machining The TH10 grade is an uncoated carbide developed as a sharp, universal grade for non-ferrous alloys and situations where an uncoated cutting edge supports reduced cutting forces and superior surface conditions. An uncoated edge minimises built-up edge on softer metals and improves the initial surface integrity; this is particularly beneficial for aluminium, brass and other non-ferrous workpieces. The result is efficient material removal with lower spindle load and improved dimensional control when lighter cutting strategies are preferred. Practical integration features that simplify toolholding Integration into existing tooling is simplified by the cylindrical hole with one-sided countersink (40°–60°) and a 3.18 mm plate thickness, which support secure fastening with standard clamping kits and replacement screws. The 7° clearance angle reduces rubbing on the flank while maintaining rigidity at the cutting rim. The insert’s 11-size inscribed circle and triangular outline permit multiple indexing positions, extending usable edge life before indexing or disposal, and make it compatible with common external holders, boring bars and the usual shim/klemmsatz combinations. Productivity benefits through informed grade and chipbreaker selection When paired with an appropriate single-sided chipbreaker and matched holder stability, this grade and geometry balance productivity with tool life: sharp uncoated radii reduce cutting forces, while the chip control geometry helps achieve continuous, controllable chips in turning. Typical system configuration includes the ISO triangular insert, a suitable external holder or boring bar, a support shim and replacement screws; selecting the correct chipbreaker and grade for the workpiece material and setup stability yields measurable efficiency gains and fewer interruptions for tool maintenance. Contact Metav Werkzeuge today to discuss suitability for specific materials and machining setups or to order the Tungaloy TCGT110300 through Metav Werkzeuge; technical advisers are available to help select the correct chipbreaker and holder combination Technical data Article number: 6807683-Tungaloy Manufacturer SKU: TUN6807683 Manufacturer article number: 6807683 Model series: ISO turning inserts Material: Carbide Core specifications Included angle: 60° Clearance angle: 7° Thickness: 3.18 mm Inscribed circle / size: 11 Hole: with hole Special features Grade: TH10 Uncoated carbide cutting edge Triangular plate form Single-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) Intended application: Turning (external and internal) System components: insert, compatible external holder or boring bar, shim/clamp and replacement screws FAQ What materials is this insert suitable for? The TH10 grade is tailored for non-ferrous materials; the Tungaloy TCGT110300 insert performs well on aluminium, brass and similar alloys where a sharp uncoated edge improves surface finish. Will this insert fit my existing ISO triangular holder? Compatibility depends on the holder’s form, clearance, tolerance class, fastening and size; the TCGT110300 follows ISO triangular conventions but the holder must match the insert’s 11-size and 3.18 mm thickness. What benefit does the uncoated TH10 grade provide? An uncoated TH10 cutting edge reduces built-up edge and cutting forces on soft and non-ferrous materials, promoting cleaner surfaces and lower spindle loads in light to medium turning. How does the hole and countersink affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) ensures reliable mechanical location and secure clamping with standard screws and shims, aiding repeatable seating and stable cutting. Is this insert suitable for both external and internal turning? Yes; the geometry and indexable triangular form make the insert appropriate for both external operations and internal boring when paired with the correct holder and stability conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110300 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of an ISO‑standard triangular geometry, a sharp TH10 uncoated carbide grade and a precise 7° clearance angle to achieve reduced cutting forces and improved surface finish; order the Tungaloy insert directly via Metav Werkzeuge or consult the team for holder compatibility and application advice. TCGT 110300 TH10 Tungaloy indexable turning insert — triangular, 7° clearance TCGT110300 TH10 is an ISO‑standard triangular indexable insert for external and internal turning, offering a sharp uncoated carbide grade and a one‑sided chipbreaker for low cutting forces. ISO triangular insert TCGT110300 TH10 Sharp uncoated carbide for non‑ferrous metals 7° clearance, 60° insert angle, 3.18 mm thick Cylindrical hole with 40°–60° one‑sided countersink Consistent geometry for accurate turning and repeatable results The triangular geometry with a 60° included angle gives a stable seating in compatible holders and allows three usable cutting edges per insert. The ISO‑standard designation ensures interchangeability across holders defined by form, clearance angle, tolerance class, fastening and thickness. The precise 3.18 mm thickness and the cylindrical hole with a one‑sided countersink (40°–60°) provide secure clamping and repeatable positioning, reducing setup variation and scrap rates in batch production. Low cutting forces and improved surface quality with TH10 The TH10 grade is an uncoated, sharp universal carbide designed to favour applications where low cutting forces and clean surfaces are required, notably in non‑ferrous materials. Combined with the single‑sided chipbreaker, the grade supports controlled chip formation and efficient evacuation, which translates into better surface finish and reduced tendency for workpiece smearing. For machining tasks prioritising surface integrity and minimal cutting energy, this combination offers a measurable efficiency advantage. Practical mounting features that speed tool changes Compatibility with a wide range of external holders and boring bars is determined by the insert’s form, free angle and fastening style. The presence of a cylindrical centre hole and one‑sided countersink simplifies alignment and secures the insert under clamping forces, while the triangular profile allows quick index changes. For new set‑ups or rapid tool swaps, the robust locating features contribute to shorter downtime and more predictable cycle times. Material focus and selection guidance for reliable productivity The combination of a carbide substrate and an uncoated cutting edge makes this insert well suited to machining aluminium, brass and other non‑ferrous alloys where low cutting forces are beneficial. The sharp edge reduces built‑up edge formation and helps maintain consistent part tolerances. When considering this insert for mixed‑material production, select the appropriate chipbreaker and holder stability to match the workpiece and cutting parameters for optimal tool life and process stability. For procurement or application advice on the Tungaloy TCGT110300 TH10 indexable insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored recommendations and rapid delivery options Technical data Article number: 6807686 Manufacturer SKU: TUN6807686 SKU: 6807686‑Tungaloy Model series: ISO turning inserts series Material: Carbide ISO designation: TCGT110300 Grade: TH10 Application: Turning Label: TCGT110300 TH10 Tungaloy‑insert Facts Insert size: 11 mm Thickness: 3.18 mm Clearance angle: 7° Insert angle: 60° Hole: with hole Hole style: cylindrical hole + one‑sided countersink (40°–60°) Special features Insert shape: triangular Chipbreaker: one‑sided Coating: uncoated Typical use: external and internal turning Compatibility: holder fit determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The TCGT110300 TH10 insert from Tungaloy is optimised for non‑ferrous materials such as aluminium and brass, where the sharp uncoated carbide grade supports low cutting forces and clean surface finishes. How is the insert secured in the holder? The insert features a cylindrical centre hole with a one‑sided countersink (40°–60°) that, together with the triangular form and specified thickness, ensures secure clamping and repeatable positioning in compatible holders. How many cutting edges are available per insert? The triangular design provides three cutting edges per insert; indexing to a fresh edge maintains geometry consistency and prolongs effective tool use for the Tungaloy insert. Does the insert require a coated grade for long tool life? This Tungaloy grade TH10 is intentionally uncoated to deliver low cutting forces and improved finish on non‑ferrous workpieces; for heavy‑duty or abrasive applications, consider coated grades where available. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCGT 110301 J740 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, J740 carbide grade and compact geometry for consistent chip control and prolonged tool life; order the insert directly via Metav Werkzeuge or ask our consultants for application guidance. TCGT 110301 J740 — Tungaloy indexable turning insert for Turning, triangular, 7° clearance A TCGT110301 J740 indexable turning insert designed for ISO-compliant external and internal turning, offering a compact triangular form and a balanced mix of wear resistance and edge stability. ISO-compliant triangular insert J740 grade for wear resistance 0.1 mm nose radius for fine finishes Secure clamping with cylindrical hole 7° relief for versatile cutting Improved process reliability with a wear-resistant grade The combination of J740 and a carbide substrate gives a predictable balance of hardness and toughness, translating into steady tool life and fewer unplanned tool changes. In production environments where uptime matters, the reliable wear performance reduces interruptions and supports repeatable component tolerances. The ISO-based geometry ensures compatibility with a wide range of holders when form, relief angle, tolerance class, fastening and thickness are matched, which simplifies tool inventory and supports efficient set-ups. Precise geometry for consistent surface quality Designed with a 60° triangle and a 0.1 mm nose radius, this insert delivers repeatable finishes on profile and facing operations. The 7° clearance angle and 3.18 mm plate thickness provide a stable cutting edge under both light and moderate interrupted cuts. A cylindrical hole with single-sided countersink (40°–60°) secures the tip in the clamp and helps maintain concentric seating, which is particularly useful for fine internal work or when using smaller-diameter boring bars. These geometric details make it easier to predict cutting forces and to achieve the targeted surface quality. Practical selection and system integration for turning tasks For most external or internal turning tasks the chipbreaker and grade should be selected to match workpiece material and machining stability; the single-sided chipbreaker is suitable for conventional turning directions. The insert is part of an ISO system consisting of the indexable plate, an appropriate external holder or boring bar, a shim/clamping set and replacement screws. This modular approach enables rapid replacement and consistent clamping. If finer advice is required for a specific application or material pairing, technical consultation is available to support optimal grade and chipbreaker choice. Contact Metav Werkzeuge for tailored machining recommendations on the Tungaloy TCGT110301 J740 indexable insert — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6807690 SKU: 6807690-Tungaloy Manufacturer SKU: TUN6807690 ISO designation: TCGT110301 Model series: ISO indexable turning inserts Material: carbide Core data Included angle: 60° Relief/clearance angle: 7° Corner radius: 0.1 mm Thickness: 3.18 mm Size (inscribed circle): 11 mm Special features Triangular plate With hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Grade: J740 (Tungaloy) System: ISO indexable turning insert compatible with holders Typical application: external and internal turning FAQ Which turning operations suit this insert best? The insert is intended for external and internal turning; its triangular form and chipbreaker support conventional turning operations and general-purpose profiling. How is compatibility with a toolholder ensured? Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness; the ISO designation TCGT110301 helps identify matching holders and clamping sets. What benefits does the J740 grade provide? The J740 grade from Tungaloy combines wear resistance, edge stability and toughness to give a balanced performance for general turning applications. What are the key geometric specifications to consider? Important specs include the 60° included angle, 0.1 mm corner radius, 7° clearance, 3.18 mm thickness and the cylindrical hole with single-sided countersink. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110301 J740 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a durable J740 grade and precise geometry for consistent turning performance; order the insert directly via Metav Werkzeuge or ask our consultants if needed. TCGT 110301 J740 triangular indexable turning insert – Tungaloy, 60° main cutting edge, with 7° clearance TCGT110301 J740 is a triangular indexable insert designed for general turning applications and ISO-conforming tool holders Triangle ISO insert 60° geometry Tungaloy grade J740 for balanced wear resistance 0.1 mm corner radius and 7° clearance angle Cylindrical hole with 40°–60° countersink Reliable fit with ISO-compatible holders for fast changeovers The ISO-conforming design ensures that the insert sits correctly in standard external and internal turning holders; compatibility is defined by shape, clearance angle, tolerance class, clamping arrangement, size and thickness. For workshop planners this means predictable set-up behaviour and repeatable cutting positions, reducing downtime during tool changes. The presence of a cylindrical hole with one-sided countersink (40°–60°) helps to secure the insert reliably in the seat and contributes to stable clamping under varying cutting forces. Balanced material grade for longer tool life and edge stability The J740 grade from Tungaloy combines carbide substrate properties tuned for turning tasks with a formulation that balances wear resistance and toughness. This balance reduces flank wear while maintaining cutting-edge stability during intermittent cuts or when workpiece material varies. For production batches where consistent tool life is essential, the grade supports predictable replacement intervals and stable surface finish over extended runs. Geometry and chip control that support process reliability The triangular 60° cutting angle paired with a 0.1 mm corner radius delivers a compromise between strength of the cutting edge and the ability to achieve fine surface finishes. The single-sided chipbreaker assists in controlled chip formation for a range of turning operations, helping to avoid long, stringy chips and improving swarf evacuation. As a result, machining cycles run cleaner and machine tool downtime caused by chip entanglement is reduced. Practical dimensions and handling for everyday workshop use With a plate thickness of 3.18 mm and an inscribed size of 11, the insert offers robust seating and good edge support in standard clamping systems. The moderate clearance angle of 7° minimises risk of rubbing while preserving edge strength at engagement. For operations that require frequent indexing, the triangular form provides up to three indexable edges, making replacement cycles economical and reducing inventory variety in the holder stock. For tailored selection, stock availability or advice on integrating Tungaloy grade J740 inserts into current turning processes, contact Metav Werkzeuge for immediate, expert support and supply. Technical data Article number: 6807687 Manufacturer SKU: TUN6807687 SKU: 6807687-Tungaloy Name: TCGT110301 J740 Tungaloy indexable insert Facts Cutting angle: 60° Corner radius: 0.1 mm Clearance angle: 7° Thickness: 3.18 mm Size: 11 (inscribed circle) Special features Material: carbide Grade: J740 (Tungaloy) Plate form: triangular Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Application: turning Model series: ISO turning indexable inserts FAQ What is the primary application of this insert? The TCGT110301 J740 insert is intended for turning operations and is suitable for a broad range of general turning tasks where balanced wear resistance and edge stability are required. How is compatibility with tool holders ensured? Compatibility is determined by shape, clearance angle, tolerance class, clamping method, size and thickness; the TCGT110301 follows ISO conventions so it matches standard ISO turning holders when those parameters align. How many cutting edges are available per insert? A triangular indexable insert normally provides up to three indexable cutting edges, allowing economical re‑indexing and extended use before replacement. What benefits does the J740 grade provide? The J740 grade offers a balance of wear resistance and toughness, promoting longer edge life in varied turning conditions while maintaining surface finish and edge stability. Does the insert support secure clamping under heavy cuts? The combination of 3.18 mm thickness, a cylindrical hole with countersink and ISO-compatible geometry ensures secure seating and stable clamping for reliable performance under typical turning forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110301 SH7025 Wendeplatten - Tungaloy
Take advantage of coated cemented carbide SH7025 and a 0.1 mm nose radius for consistent edge stability and fine-detail turning; the ISO‑standard triangular geometry with a 60° included angle ensures predictable chip control and compatibility with standard holders. Order the Tungaloy insert directly via Metav Werkzeuge or consult our application specialists for tailored recommendations. TCGT 110301 SH7025 Tungaloy turning insert — triangular, 0.1 mm nose radius TCGT 110301 SH7025 is an indexable turning insert designed for external and internal turning on ISO‑compliant tool systems ISO‑standard triangular insert, 60° geometry Coated cemented carbide SH7025 for edge stability 0.1 mm nose radius for fine detail Countersunk hole for secure clamping Precision and predictable cutting behaviour for productive turning The combination of coated cemented carbide and the SH7025 grade provides a balance of toughness and wear resistance that favours reliable performance in variable engagement conditions. The 60° geometry of the triangular insert offers a familiar cutting profile that simplifies toolpath planning and helps achieve consistent surface finish. For practical workflows, the 0.1 mm nose radius supports fine-detail turning and reduces the risk of chatter on smaller toolholders, while the 3.18 mm thickness contributes to stable clamping and vibration damping. These attributes translate into measurable process benefits: fewer mounting adjustments, more reproducible part quality and extended tool life under changing conditions. Compatibility and mounting — designed for standard tool systems Manufactured to the ISO‑standard, the insert mates with holders determined by form, clearance, tolerance class, fastening and size. The insert comes with a cylindrical hole and a one‑sided countersink (40°–60°) to secure the plate reliably in centre‑clamping or screw‑clamping arrangements. The triangular shape with its single-sided chipbreaker requires selection of a matching holder and chipbreaker orientation for optimal swarf control. For shops converting designs or replacing legacy plates, this standardisation reduces set‑up time and inventory complexity while ensuring mechanical compatibility across established turning systems. Practical benefits in everyday machining Beyond material properties, the overall design emphasises ease of use: the standard hole and countersink simplify replacement, the defined 7° clearance angle reduces rubbing at entry and exit, and the triangular form supports three positive cutting edges per insert. This configuration minimises tooling costs per edge and improves uptime. For operations where tool changes are frequent, the repeatability of seat location and clamping ensures quick re‑establishment of cutting datum, lowering cycle variation and helping maintain throughput. Choosing the right grade and chipbreaker The SH7025 grade is formulated for edge stability, making it particularly suitable when tool size is restricted or when varying depths of cut occur. Selection of the appropriate chipbreaker and grade should be guided by the workpiece material and the intended machining strategy; for example, a robust chipbreaker matched to the cutting direction will enable consistent swarf evacuation and reduce the risk of built‑up edge. If material specifics or process limits are unclear, pairing the insert with matched Tungaloy holders and trial cuts under controlled conditions is recommended to validate performance. For precise, productive turning with the Tungaloy SH7025 grade, contact Metav Werkzeuge for availability and application advice — Metav Werkzeuge can provide specification support and supply the correct inserts for the operation. Technical data Article number: 6967550 Manufacturer SKU: TUN6967550 Label: TCGT110301 SH7025 Tungaloy‑Wendeplatte Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Coating / grade: SH7025 Core specifications Insert designation: TCGT110301 Thickness: 3.18 mm Inscribed circle / size: 11 mm Included angle: 60° Clearance angle: 7° Corner radius: 0.1 mm Manufacturer article number: 6967550 Designs and special features Triangular insert form With cylindrical hole and one‑sided countersink (40°–60°) Single‑sided chipbreaker ISO‑standard turning insert Intended application: turning FAQ What applications suit this insert best? This insert is intended for external and internal turning operations; the TCGT 110301 SH7025 insert is especially useful where edge stability and small tool sizes are required. Which materials does the SH7025 grade handle? The SH7025 coated cemented carbide grade is designed for stable cutting edges and variable engagement conditions; selection of the matching chipbreaker should be based on the workpiece material and cutting parameters. How does the insert fix to the holder? The insert features a cylindrical hole with a one‑sided countersink (40°–60°) for secure clamping; ensure the chosen holder matches the ISO form and fastening method of the plate. How many cutting edges are available per insert? The triangular format provides three indexable cutting edges per plate, enabling economical rotation of the insert when one edge is worn. Can this insert be used in small toolholders? Yes, the SH7025 grade and the 0.1 mm nose radius are suitable for smaller holders and varying engagement conditions, offering a balance of toughness and wear resistance for such setups. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCGT 110301 SH725 Wendeplatten - Tungaloy
Benefit from the combination of SH725 coated carbide for durable edge stability, the 60° triangular geometry and a fine 0.1 mm corner radius for precise turning and repeatable results. Order the insert directly via Metav Werkzeuge or consult our specialists if further guidance is required. TCGT 110301 SH725 ISO triangular insert for turning — Tungaloy The TCGT 110301 SH725 is an ISO-standard triangular indexable insert engineered for external and internal turning applications, offering robust edge life for small tools and variable engagement conditions ISO triangular 60° geometry Coated carbide grade SH725 0.1 mm corner radius for fine detail Cylindrical hole with 40°–60° countersink Consistent cutting performance through a tough, edge-stable grade The insert’s SH725 coating and coated carbide substrate deliver a balance of toughness and abrasion resistance that supports repeatable cutting action in turning operations. This composition is designed to maintain edge stability under fluctuating engagement, which reduces the frequency of tool changes and contributes to a steadier cycle time. For smaller toolholders or where cutting conditions vary, the chosen grade helps preserve surface quality while limiting premature edge chipping, thus supporting higher productivity in batch and single-part production. Precision geometry that supports accurate finishes and secure seating A 60° geometry combined with a 0.1 mm corner radius provides controlled cutting for finishing and semi-finishing passes, allowing fine dimensional control and consistent surface quality. The insert’s relief angle of 7° and a plate thickness of 3.18 mm ensure compatibility with ISO-standard holders when form, clearance, tolerance class, clamping method, size and thickness are matched. The presence of a cylindrical hole with a one-sided countersink (40°–60°) secures the insert in the seat and helps maintain repeatable location during indexing, preserving the intended tool path and reducing setup deviations. System-ready design for flexible turning workflows Intended for use as part of a complete turning system, the insert integrates with suitable external holders or boring bars together with a shim/clamp set and replacement screws to form a reliable assembly. The single-sided chipbreaker is optimised for controlled chip formation in common turning operations and, together with the robust grade, supports stable cutting even in variable engagement. By selecting the appropriate chipbreaker and application strategy, the insert can be deployed for both external and internal turning tasks, helping to lower machine downtime and simplify inventory through ISO compatibility. For tailored recommendations on Tungaloy turning solutions contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, practice-oriented advice Technical data Article number: 6737041 Manufacturer SKU: TUN6737041 SKU: 6737041-Tungaloy Model series: ISO turning indexable inserts Name: TCGT110301 SH725 Tungaloy insert Core specifications Geometry angle: 60° Corner radius: 0.1 mm Relief angle: 7° Thickness: 3.18 mm Inscribed circle Ø: 11 mm Special features Material: coated carbide Grade/coating: SH725 Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Plate form: triangular Typical application: external and internal turning System components: insert, holder or boring bar, shim/clamp set, fastening screws FAQ Which materials is this insert suited for? The TCGT 110301 SH725 insert from Tungaloy is a coated carbide grade chosen for toughness and edge stability, making it suitable for a wide range of turning tasks where variable engagement or small-tool applications are common. How is compatibility with holders ensured? Compatibility with holders is determined by matching the insert form, clearance angle, tolerance class, clamping method, inscribed circle and thickness; the TCGT 110301 is ISO-standard and intended to fit matching ISO holders or boring bars. What cutting geometry should be used for fine finishing? For fine finishing the 0.1 mm corner radius on the insert provides controlled engagement and a good surface finish while the 60° geometry supports accurate dimensional control in turning passes. How is the insert secured in the seat? The insert features a cylindrical hole with a one-sided countersink (40°–60°) and is normally clamped with a shim/clamp set and fastening screws as part of the ISO system assembly. Is this insert suitable for internal as well as external turning? Yes, the Tungaloy TCGT 110301 SH725 is designed for both external and internal turning operations when used with appropriate toolholders and setup Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110301 SH725 Wendeplatten - Tungaloy
Combining the SH725 coated-carbide grade with the ISO triangular geometry delivers dependable edge stability and flexible turning performance; compatibility is assured through the 7° clearance, 60° nose angle and standard mounting configuration. Order the TCGT110301 directly via Metav Werkzeuge or consult the specialists for machining recommendations. TCGT 110301 SH725 Tungaloy turning insert — ISO triangular insert with 7° clearance and 0.1 mm nose radius The TCGT110301 SH725 is an ISO-form indexable insert designed for general turning; its coated-carbide grade offers robust edge stability for variable engagement and smaller-tool setups. ISO triangular insert TCGT110301 SH725 coated carbide grade 60° geometry for versatile turning Cylindrical hole with single-side countersink Consistent cutting performance from a tough, coated grade The combination of the SH725 coating and coated carbide substrate provides a balance between toughness and wear resistance that reduces unexpected edge failure. For turning operations with changing engagement conditions or when using compact holders, this insert maintains a stable cutting edge, which translates into fewer interruptions for index changes and more predictable component tolerance control. The design supports steady chip formation and sustained performance, making it suitable where repeatable results are required across short to medium production runs. Secure seating and defined geometry for accurate turning The insert’s 60° triangular form, 7° clearance and 0.1 mm nose radius combine to give defined cutting geometry and reliable seating in standard ISO holders. The 3.18 mm thickness and the cylindrical hole with a single-side countersink (40°–60°) ensure positive clamping and repeatability when mounted with the correct clamp set and screw. Compatibility depends on form, clearance, tolerance class, fastening method, size and thickness, so matching the insert to the intended holder and mounting hardware is essential for optimal rigidity and surface finish. Practical selection and effective machining strategy Choose the single-sided chipbreaker and the SH725 grade according to the workpiece behaviour and the stability of the tool setup; the grade performs particularly well for smaller tools or where engagement conditions vary. When tool life and process stability are priorities, this insert supports productive turning by reducing the frequency of unexpected tool changes. For application-specific advice, machining parameters and optimisation of feed and speed, consult the technical team to align the insert choice and chipbreaker style with the intended process. Contact Metav Werkzeuge for tailored machining recommendations and availability of Tungaloy turning inserts: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: 6737040 Manufacturer SKU: TUN6737040 Model series: ISO-Drehwendeschneidplatten Name: TCGT110301 SH725 Tungaloy-Wendeplatte Facts Geometry angle: 60° Clearance angle: 7° Nose radius: 0.1 mm Thickness: 3.18 mm Size: 11 Special features Material: Hartmetall (carbide) Coating / Grade: SH725 Plate form: triangular Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Typical application: Drehen (turning) System components: ISO insert, matching external holder or boring bar, clamp set and replacement screws FAQ What turning tasks is this insert intended for? The TCGT110301 SH725 insert is intended for general turning operations where edge stability and repeatable clamping are required, especially in setups with smaller tools or varying engagement. How does the SH725 grade influence tool life? The SH725 coated grade offers a balance of toughness and wear resistance that prioritises stable cutting-edge behaviour and can extend usable life under fluctuating cutting conditions. Which geometric data are essential when selecting a matching holder? Match the holder based on the insert’s 60° form, 7° clearance, 3.18 mm thickness, size 11 and hole configuration; these dimensions determine fit, clamping and repeatability. Is the chipbreaker suitable for heavy cuts? The insert is supplied with a one-sided chipbreaker; chipformer selection should be made in line with the intended depth of cut and process stability to ensure controlled chip evacuation. What components form the complete system for use? A complete system comprises the ISO insert, an appropriate external holder or boring bar, an underlay/clamp set and the replacement screws required for secure assembly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110301 TH10 Wendeplatten - Tungaloy
Take advantage of the sharp TH10 grade and uncoated carbide edge for low cutting forces and improved surface finish; the ISO‑standard TCGT geometry and 60° included angle ensure predictable toolpath behaviour and straightforward holder compatibility. Order directly via Metav Werkzeuge or consult the team for application advice. TCGT 110301 TH10 Tungaloy indexable turning insert for turning The Tungaloy TCGT110301 is an ISO‑standard triangular indexable insert in grade TH10, designed for external and internal turning where low cutting forces and clean surfaces are required. Uncoated carbide TH10, low cutting forces ISO TCGT geometry with 60° included angle Triangular insert with 0.1 mm corner radius Centrally holed with one‑side countersink 40°–60° Improved surface quality through low cutting forces The combination of an uncoated carbide substrate and the sharp TH10 grade reduces cutting forces and promotes a cleaner shear zone when machining non‑ferrous materials such as aluminium and brass. This leads to a measurable improvement in surface finish and reduced tendency for built‑up edge formation. For shops processing delicate workpieces, the reduced cutting force translates into less vibration and more consistent dimensional results. Predictable geometry for stable machining results The ISO‑standard TCGT form with its 60° included angle and 0.1 mm corner radius provides a reproducible cutting geometry across compatible toolholders. The insert thickness of 3.18 mm and the nominal size 11 influence clamping stability and cutting stiffness; compatibility with a holder is determined by form, clearance angle, tolerance class, fastening, size and thickness. Clear specification of these parameters ensures repeatable set‑up and simplifies tool changeovers in serial production. Fast assembly and integration in turning systems The insert is supplied centrally holed with a cylindrical hole and a one‑side countersink (40°–60°), facilitating secure clamping and accurate positioning on compatible holders. The single‑sided chipbreaker geometry is optimised for turning applications and supports reliable chip control when matched to the workpiece material and cutting conditions. A typical system comprises the ISO insert, a matching external holder or boring bar, a shim/seat and the clamping screw, enabling quick replacement and minimal downtime. Process reliability and economical operation Choosing a sharp universal grade such as TH10 can increase productivity for non‑ferrous turning by reducing secondary finishing and lowering scrap rates. The predictable wear behaviour of the uncoated cutting edge simplifies tool life calculations and planning for regrinds or replacements. For manufacturers aiming to combine efficiency with consistent quality, this insert offers a pragmatic balance between cutting performance and production economy. For components requiring reliable low‑force turning, request availability of the Tungaloy TH10 inserts through Metav Werkzeuge or obtain tailored application recommendations from Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6807692 Manufacturer SKU: TUN6807692 SKU: 6807692-Tungaloy Model series: ISO‑indexable turning inserts Material: carbide Core specifications Corner radius: 0.1 mm Thickness: 3.18 mm Size: 11 Included angle: 60° Clearance angle: 7° Design & special features Grade: TH10 (uncoated) Shape: triangular (TCGT) Hole: cylindrical hole with one‑side countersink 40°–60° Chipbreaker: single‑sided Application: turning (external and internal) Compatibility: determined by holder form, clearance, tolerance, fastening, size and thickness FAQ Which materials is this insert suited for? The Tungaloy TCGT110301 in grade TH10 is optimised for non‑ferrous materials such as aluminium and brass and for applications where a sharp uncoated edge supports low cutting forces and good surface finish. Can the insert be used for both external and internal turning? Yes, the geometry and the single‑sided chipbreaker make the Tungaloy TCGT110301 suitable for both external and internal turning when paired with an appropriate external holder or boring bar. What corner radius and thickness are available? This insert features a 0.1 mm corner radius and a thickness of 3.18 mm, offering a balance between edge strength and the ability to produce fine surface finishes. How is the insert secured in the holder? The insert is centrally holed with a cylindrical hole and a one‑side countersink (40°–60°), allowing secure screw clamping and accurate seating when used with matching clamping hardware and shims. What are the article number and SKU for ordering? The article number is 6807692 and the SKU is 6807692-Tungaloy for the Tungaloy triangular TCGT110301 TH10 indexable turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110301 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of the TH10 uncoated carbide and the 60° triangular geometry for low cutting forces and consistently clean surfaces in turning applications; order directly via Metav Werkzeuge or consult our specialists for compatibility and holder selection. TCGT 110301 TH10 turning insert for turning by Tungaloy A Tungaloy TCGT110301 TH10 ISO triangle insert for external and internal turning, designed for low cutting forces and clean surface finishes on non-ferrous workpieces. ISO triangle insert, 60° cutting geometry Uncoated carbide TH10 for low cutting forces Single-sided chipbreaker for clean surface finish Cylindrical hole with 40°–60° countersink Stable 60° geometry for predictable turning performance The triangular, 60° geometry delivers predictable cutting behaviour and stable engagement in both external and internal turning. With a 7° clearance the insert reduces rubbing at the flank face, which lowers cutting temperatures and helps conserve tool life under consistent conditions. The moderate corner radius of 0.1 mm supports precise finishing passes and helps to avoid excessive tool deflection on slender parts. Where process reliability and repeatable surface integrity matter, this geometry specialises in controlled metal removal and consistent dimensional outcomes. Material and edge design tuned for low-force machining Built from uncoated carbide in the TH10 grade, the insert provides an advantage where reduced cutting forces and excellent surface integrity are priorities, especially on non-ferrous materials. An uncoated cutting edge can produce a clean surface finish with minimal built-up edge tendency and helps to keep feed forces low during light to medium cuts. The TH10 formulation balances sharpness and wear resistance, offering predictable behaviour over a range of cutting speeds; this makes it suitable for operations where a sharp, uncoated edge supports part quality and dimensional control. Mounting and system compatibility explained Compatibility with toolholders depends on insert form, ISO standard designation, clearance angle, tolerance class, fastening method, size and thickness. The insert features a cylindrical hole with single-side countersink (40°–60°) which suits holders designed for centrally secured triangular inserts; the plate thickness of 3.18 mm and the 11 mm size must match the pocket and clamp arrangement. When assembling the system, use the recommended support plate, clamp set and replacement screws to ensure correct seating and repeatable clamping torque, thereby avoiding misalignment that could affect finish or tool life. Practical benefits and recommended use For external and internal turning the single-sided chipbreaker assists controlled chip formation, improving evacuation and reducing the risk of surface damage on delicate workpieces. The insert is optimised for turning tasks where low cutting forces and good surface appearance are needed rather than heavy interrupted cuts. Select this solution when machining non-ferrous components or when an uncoated edge delivers the required finish; for heavier or abrasive operations, consider a different grade or coated alternative. Assistance on selecting the correct chipbreaker variant and holder pairing is available to ensure efficient, cost-effective production. For application advice or to request the Tungaloy TH10 insert (SKU TUN6807689) through Metav Werkzeuge, please contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6807689 Manufacturer SKU: TUN6807689 SKU: 6807689-Tungaloy Model series: ISO turning indexable inserts Facts Insert designation: TCGT110301 Insert size: 11 mm Thickness: 3.18 mm Clearance angle: 7° Main angle: 60° Corner radius: 0.1 mm Special features Material: uncoated carbide (TH10) Shape: triangular Hole: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) FAQ What materials is this insert best suited for? The TH10 uncoated carbide grade is optimised for non-ferrous materials and applications where a sharp, uncoated edge supports low cutting forces and a clean surface finish; the Tungaloy insert performs well in such scenarios. How is the insert secured in the holder? The insert uses a cylindrical hole with a single-side countersink (40°–60°); compatibility requires matching holder form, size, thickness and clamping method to ensure correct seating and repeatable clamping. Can this insert be used for finishing operations? Yes, the 0.1 mm corner radius combined with the 60° geometry and single-sided chipbreaker supports finishing cuts that demand good surface quality and dimensional control. Is the insert suitable for internal turning and small-diameter work? The triangular form and ISO designation permit internal turning where the holder geometry and insert size are appropriate; ensure the 11 mm size and 3.18 mm thickness fit the chosen boring bar pocket. Which features influence the choice of chipbreaker? Chip formation depends on workpiece material, feed and depth of cut; the single-sided chipbreaker on this insert aids controlled chips for non-ferrous and stable turning, but match chipbreaker style to the specific machining parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110302 J740 Wendeplatten - Tungaloy
Benefit from the combination of Tungaloy's wear-resistant grade and robust carbide construction to maintain process stability and consistent tool life in turning operations. Order the TCGT110302 J740 indexable insert directly via Metav Werkzeuge or consult the technical team for application matching and holder compatibility. TCGT 110302 J740 Tungaloy — ISO turning indexable insert (triangular, 60°, 0.2 mm radius) TCGT110302 J740 is an ISO‑compliant triangular indexable insert engineered for external and internal turning, offering a balanced mix of wear resistance and edge stability in a compact geometry. ISO triangular insert, 60° included angle Tungaloy J740 grade, carbide construction 0.2 mm corner radius for accurate profiling Single-sided chipbreaker with cylindrical hole Consistent tool life through a tailored carbide grade The insert's J740 grade from Tungaloy combines wear resistance and edge toughness to extend service intervals and reduce unexpected tool changes. Designed as a carbide indexable cutting part, it provides predictable abrasion behaviour under continuous turning loads. This reliability translates into fewer machine interruptions and more consistent component dimensions, supporting higher productivity in both batch and single‑piece production environments. Geometry and clamping for repeatable accuracy The triangular shape with a 60° included angle and a 0.2 mm corner radius creates precise contouring while maintaining strength at the cutting edge. The 7° relief angle and 3.18 mm plate thickness ensure stable seat contact in compatible holders, while the cylindrical hole with single‑side countersink (40°–60°) secures repeatable clamping. These design choices improve profile accuracy and enable safe, repeatable indexing for multiple cutting edges, reducing setup time and enhancing component consistency. Practical integration in ISO tool systems As an ISO turning insert, compatibility with toolholders depends on form, relief angle, tolerance class, clamping method, size and thickness. The system typically comprises the ISO insert, a suitable external holder or boring bar, a supporting shim or clamp set and replacement screws. The single-sided chipbreaker offers controlled chip formation for many steels and general turning tasks; pairing the insert with an appropriate holder and cutting parameters delivers optimised chip control and surface finish. For application guidance or to verify holder fit, Metav Werkzeuge can advise on the correct clamping accessories and cutting data. For tailored machining advice on Tungaloy turning inserts and to confirm holder compatibility, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6807698 SKU: 6807698-Tungaloy Manufacturer SKU: TUN6807698 Designation: TCGT110302 J740 Tungaloy turning insert Model series: ISO turning indexable inserts Dimensions & core data Size: 11 mm Thickness: 3.18 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 60° Countersink angle: 40°–60° Materials & special features Material: Carbide Grade/coating: J740 (Tungaloy) Shape: Triangular Chipbreaker: Single-sided Hole: Cylindrical hole with one-sided countersink Application: Turning Compatibility: ISO holders depending on form, relief, tolerance, clamping, size and thickness FAQ What materials is this insert suitable for? The TCGT110302 J740 insert is a carbide cutting grade suited to a broad range of turning tasks; the J740 composition delivers balanced wear resistance and toughness for many steels and general engineering materials. How is the insert clamped in the toolholder? The insert uses a cylindrical hole with a one‑sided countersink (40°–60°) for secure clamping; correct seating depends on holder geometry, relief and tolerance class for the TCGT110302 J740 insert. Can the corner radius be used for finishing passes? The 0.2 mm corner radius on this triangular insert provides a compromise between profile definition and edge strength, making it suitable for light finishing and medium‑duty contouring tasks. How many indexing positions are available per insert? As a triangular ISO insert, the TCGT110302 J740 typically provides three indexable cutting edges; repeatable indexing relies on secure clamping and correct holder matching. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110302 J740 Wendeplatten - Tungaloy
Benefit from the combination of J740 grade, a 0.2 mm corner radius and a 7° relief for stable cutting performance and predictable tool life; order the insert directly via Metav Werkzeuge or consult the specialists for application matching. TCGT 110302 J740 Turning insert by Tungaloy — 7° relief, 0.2 mm radius The TCGT110302 J740 is an ISO‑standard triangular turning insert designed for general external and internal turning where a balance of wear resistance and edge stability is required. ISO triangular insert TCGT 110302 J740 Tungaloy carbide grade J740 for wear resistance 7° relief for stable cutting edge Cylindrical hole with 40°–60° countersink Consistent performance from a wear‑resistant grade The J740 designation denotes Tungaloy’s carbide formulation optimised for a wide range of turning operations; this grade offers a blend of wear resistance and toughness that reduces unexpected edge breakage. In practice, the optimized substrate and chip control result in longer intervals between tool changes and more predictable component quality, which supports continuous machining cycles and reduces unplanned downtime. Geometry that supports secure clamping and stable cutting The triangular outline combined with a 0.2 mm corner radius and a 7° relief produces a dependable cutting geometry for facing and profile turning. The 0.2 mm corner radius gives a compromise between edge strength and surface finish, while the 7° relief helps to reduce rubbing at the flank and keeps cutting forces consistent. These features translate into steady dimensional control and repeatable surface quality during medium to finishing passes. Mounting compatibility and hole design explained As an ISO insert, the component fits holders that accept the TCGT form, with compatibility determined by form, clearance angle, tolerance class, fastening style, size and thickness. The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) which aids secure locating and straightforward screw clamping. The nominal plate thickness of 3.18 mm ensures sufficient body strength while remaining compatible with common external and boring toolholders. Practical choice for diverse turning tasks With a single‑side chipbreaker and the properties of the carbide substrate, this insert performs well across varied steels and common materials encountered in production turning. The standard ISO designation simplifies tool management and replacement cycles in multi‑machine environments, supporting efficient tool inventory and faster set‑ups. For workshops seeking a reliable, general‑purpose turning insert, the balance of edge life and process security makes this a pragmatic choice. Contact Metav Werkzeuge for tooling recommendations and stock availability of Tungaloy inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application details and delivery options Technical data Article number: 6807695 Manufacturer article number: 6807695 SKU: 6807695-Tungaloy Manufacturer SKU: TUN6807695 Model series: ISO turning inserts Facts Corner radius: 0.2 mm Relief angle: 7° Plate thickness: 3.18 mm Inscribed circle: 11 mm Included angle: 60° Special features Material: carbide Grade: J740 (Tungaloy) Shape: triangular Chipbreaker: single-sided Hole: cylindrical hole with single‑side countersink (40°–60°) Application: turning ISO designation: TCGT110302 With hole for screw clamping FAQ What materials is this insert suitable for? The TCGT110302 J740 insert is formulated for general turning tasks and performs well on a broad range of steels and common engineering materials due to the J740 carbide grade. Can the insert be used for internal turning (boring)? Yes, the ISO triangular form and the clamping hole with countersink allow secure mounting in compatible boring bars and holders for internal operations. How does the 0.2 mm corner radius affect surface finish? A 0.2 mm corner radius provides a compromise between edge strength and finish quality; it improves edge robustness while still achieving good surface consistency on finishing passes. Is this insert compatible with existing ISO TCGT holders? Compatibility depends on holder form, clearance angle, tolerance class, fastening style, size and thickness; the insert follows ISO standards for the TCGT form and fits matching holders. What is the advantage of the J740 grade from Tungaloy? The J740 grade offers a balanced mix of wear resistance and edge stability, resulting in reliable tool life and consistent machining performance in varied turning applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCGT 110302 J9530 Wendeplatten - Tungaloy
The combination of ISO‑standard geometry, a Tungaloy J9530 wear‑resistant grade and a precise 0.2 mm corner radius delivers consistent cutting performance and predictable tool life; order directly via Metav Werkzeuge or consult the team for application advice. TCGT 110302 J9530 indexable insert for turning — Tungaloy The TCGT110302 J9530 indexable insert is an ISO‑standard triangular insert for external and internal turning, offering a balanced mix of wear resistance and edge stability for general turning operations. ISO‑standard triangular geometry Tungaloy J9530 carbide grade 0.2 mm corner radius for fine finishing Cylindrical hole with countersink (40°–60°) Stable chip control for uninterrupted production The triangular ISO insert delivers consistent chip formation, which reduces vibration and improves surface finish in repetitive turning cycles. Manufactured from carbide and specified with the J9530 grade, the insert balances wear resistance and toughness so that chipbreakers remain effective across a wide range of steel and alloy conditions. The single‑sided chipbreaker geometry simplifies selection for standard external and internal turning tasks while ensuring reliable chip evacuation in conventional lathe setups. Longer life through optimised edge stability With a corner radius of 0.2 mm and a robust rake and clearance geometry, the insert provides stable cutting edges that tolerate intermittent loads and light interruptions without premature chipping. The combination of the Tungaloy cutting material and the insert geometry improves resistance to flank wear, meaning fewer indexings and lower tooling consumption per part. For operations where repeatability and predictable maintenance intervals matter, this specification supports steady production planning. Quick mounting and secure clamping for precise set‑up The insert features a cylindrical hole with a one‑sided countersink (40°–60°) for secure fastening in standard 60° turning holders. Compatibility depends on form, relief angle, tolerance class, attachment method, size and thickness, and the ISO designation ensures straightforward matching with many commercially available external holders and boring bars. The 3.18 mm thickness and 11 mm inscribed circle provide a compact footprint while maintaining a stable clamp interface, reducing set‑up time and enhancing positional accuracy. Versatile choice for common turning tasks Designed for turning applications, this indexable solution suits both external and internal processes where a combination of surface finish and tool life is required. The single‑sided chipbreaker and balanced grade selection make it suitable for varying feed rates and moderate depths of cut. Where operators seek a pragmatic balance between performance and economy, this insert acts as a reliable workhorse in general turning tool assortments. For reliable turning results with Tungaloy’s wear‑resistant grade and predictable edge behaviour, contact Metav Werkzeuge for ordering and application guidance at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: 6723935 SKU: 6723935-Tungaloy Manufacturer SKU: TUN6723935 Model series: ISO‑turning indexable inserts Designation: TCGT110302 J9530 Facts Size (inscribed circle): 11 mm Thickness: 3.18 mm Cutting angle: 60° Relief angle: 7° Corner radius: 0.2 mm Special features Shape: triangular Hole: cylindrical hole with one‑sided countersink (40°–60°) Grade: J9530 (Tungaloy carbide grade) Material: carbide Chipbreaker: single‑sided Intended application: turning (external and internal) FAQ What materials is this insert suited for? The TCGT110302 J9530 indexable insert is specified for general turning and performs well on common steels and alloyed materials thanks to the J9530 grade’s balance of wear resistance and toughness. How does the hole and countersink affect clamping? The cylindrical hole with a one‑sided countersink (40°–60°) on the TCGT110302 ensures secure seating and reliable clamp engagement in 60° turning holders, improving repeatability during indexings. Which insert dimensions are critical when matching a holder? Key dimensions to match are the inscribed circle (11 mm), thickness (3.18 mm), and relief angle (7°); these determine compatibility with the holder’s form, tolerance class and fastening method. Can this insert be used for finishing cuts? With a 0.2 mm corner radius and the single‑sided chipbreaker, the insert is suitable for fine finishing operations where a controlled edge and good surface quality are required. Is the J9530 grade suitable for interrupted cuts? Yes — the J9530 carbide grade was selected to combine edge stability and toughness, offering resilience against light interruptions while maintaining wear resistance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCGT 110302 J9530 Wendeplatten - Tungaloy
Take advantage of the combination of ISO interchangeability, the Tungaloy J9530 carbide grade and the precise 0.2 mm corner radius for consistent turning performance and predictable tool life; order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. TCGT110302 J9530 Tungaloy turning insert (triangular, 60°) TCGT110302 J9530 is an ISO‑standard triangular indexable insert designed for general turning applications, combining a robust Tungaloy carbide grade with a single‑sided chipbreaker for controlled chip formation. ISO-standard TCGT110302 triangular insert 60° Tungaloy grade J9530 for wear resistance 0.2 mm corner radius for accurate profiles Single-sided chipbreaker with central hole Reliable interchangeability for predictable production The triangular geometry and ISO standard designation ensure straightforward replacement and consistent positioning in ISO‑compatible toolholders, reducing setup time and variation between inserts. The 60° included angle gives a balance between cutting edge strength and access to detail; combined with the 7° relief angle, rubbing is minimised and cutting stability is improved. For production environments seeking steady cycle times, the standardised form and the central hole with countersink ensure secure clamping and repeatable seating, which supports uptime and process reliability. Cutting performance driven by the Tungaloy J9530 grade The Tungaloy J9530 grade is formulated for a mix of wear resistance and edge toughness, making it suited to a wide range of turning tasks where both tool life and surface quality matter. As a carbide insert, it sustains higher cutting speeds than high‑speed steels and, when paired with the correct single‑sided chipbreaker, promotes predictable chip control and improved heat distribution. Specifying this grade can lead to fewer interruptions for tool changes and a more favourable cost per component in medium‑ to high‑volume turning operations. Practical geometry and mounting benefits for everyday use A 0.2 mm corner radius allows precise profiling while maintaining sufficient edge strength for interrupted cuts or light depth passes. The insert’s 3.18 mm thickness and triangular form provide stability in the pocket, and the cylindrical hole plus one‑sided countersink (40°–60°) accommodates standard clamping screws and seat designs, enhancing rigidity. Selecting the appropriate chipbreaker and pairing the insert with a matched external holder or boring bar completes a system that is easy to assemble, predictable in performance and suitable for both external and internal turning when the holder geometry permits. For system matching, toolholder selection or to secure compatible inserts in larger quantities, contact Metav Werkzeuge — our consultants provide application advice and supply the original Tungaloy inserts directly via Metav Werkzeuge. Technical Data Article number: 6723934 Manufacturer SKU: TUN6723934 SKU: 6723934-Tungaloy Facts Type: ISO turning indexable insert Designation: TCGT110302 Grade: J9530 Material: Carbide Shape: Triangular Size: 11 mm Thickness: 3.18 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 60° Hole: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features Single-sided chipbreaker ISO-compatible geometry for easy interchange Suited to external and internal turning Robust clamping via central hole and countersink Tungaloy cutting material technology FAQ Which holders are compatible with this triangular insert? The TCGT110302 J9530 turning insert is compatible with ISO‑type triangular external holders and appropriate boring bars; compatibility depends on holder pocket form, clearance angle, tolerance class and screw/clamp arrangement. What does the J9530 designation indicate? J9530 denotes the Tungaloy carbide grade selected for a balance of wear resistance and edge toughness, optimised for a broad range of turning operations and chipbreaker choices. Is the insert suitable for internal turning or only for external? The triangular insert form is primarily used for external turning but can also be employed for internal turning when used with a suitably shaped boring bar and correct holder geometry. How does the 0.2 mm corner radius affect machining results? A 0.2 mm corner radius offers improved surface finish and profile accuracy compared with a sharper corner while preserving adequate edge strength for light to medium cuts. What function does the countersunk central hole provide? The cylindrical hole plus countersink (40°–60°) ensures positive clamping, accurate seating and quick insert changes while reducing the risk of insert movement under load. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com