Heavy-duty workshop verniers for large components
Our heavy-duty workshop verniers provide precise external and internal measurement of massive workpieces such as large shafts, flanges and housings, delivering stability and repeatable results even across spans up to 10,000 mm. Designed for the demands of heavy industry, shipbuilding and rail vehicle manufacture, they combine a distortion‑resistant construction in hardened or weight‑optimised special steel with ergonomic features like force‑limited measuring systems and fine adjustment for exact slide movement. Available in analogue versions with fine vernier scales or digital variants with data outputs for quality assurance integration, these calipers ensure reliable dimensional control in XXL machining.
300mm Digital Workshop Caliper With 150mm Pointed Jaws, Fine Adjustment, Inductive System, IP65, Stainless Hardened Steel, ISO17025 Calibration - Metav IndustryLine
Take advantage of IP65 protection, an inductive measuring system and a 300 mm measuring range for dependable workshop measurement and minimal downtime; order the instrument directly via Metav Werkzeuge or ask the consultants for application advice. Digital workshop caliper M217.133.1 — IP65 protection, 0–300 mm range Digital workshop caliper M217.133.1 designed for robust shop-floor measurement of external and internal dimensions with fine-adjustment and clear digital readout IP65 protection for harsh workshop conditions Hardened stainless steel construction Inductive measuring system for reliable readings Fine-adjustment thumbwheel for precise positioning Reliable shop-floor precision built for everyday use The M217.133.1 is a digital caliper in the Standard class (0–300 mm), offering a balance of reach, stiffness and one-handed operation that suits general machine-shop and metalworking tasks. Its inductive measuring system reduces sensitivity to shop contaminants compared with optical readers and provides stable readings under repeated use. With a native display resolution of 0.01 mm, the instrument supports routine quality checks and assembly tasks where clear, repeatable results are required. The IP65 rating ensures protection against dust ingress and water jets, so measurement remains reliable even in demanding environments. Faster checks through ergonomic handling and clear controls A fine‑adjustment thumbwheel lets the operator position the jaws smoothly for incremental alignment without overshoot, shortening cycle times during frequent checks. The digital display offers mm/inch, HOLD, SET, ON/OFF, 0/INC and DATA functions for flexible operation and straightforward switching between units or reference points. The 150 mm jaw length increases contact stability on larger features while the overall hardened stainless steel construction resists wear, keeping calibration intervals practical and maintenance effort low. Together, these design choices translate into measurable time savings on the shop floor. Data transfer options and durable construction for traceable results Equipped with an RB 6 data output, the caliper can be integrated into routine documentation or measurement-logging workflows to support traceability and statistical process control. The robust, fully hardened stainless-steel frame preserves measuring accuracy across many cycles and reduces the risk of scoring on mating surfaces. For procurement and quality teams the combination of IP65 durability, an inductive sensor and a proven digital interface makes the instrument suitable as a reliable workhorse for incoming inspection, setup tasks and interim process checks. Contact Metav Werkzeuge for detailed specification matching and to arrange supply of the M217.133.1 — benefit from Metav’s workshop-focused quality filter and European distribution expertise. Technical data Article number: M217.133.1 GTIN: 4054469164830 Brand: Metav IndustryLine Facts Measuring range: 0–300 mm Resolution: 0.01 mm Jaw length: 150 mm Weight: 0.9 kg Special features IP 65 protection Inductive measuring system Digital display with mm/inch, HOLD, SET, ON/OFF, 0/INC, DATA buttons Hardened stainless steel Fine-adjustment thumbwheel Data output: RB 6 FAQ What measuring range does this caliper cover? The caliper covers a range of 0–300 mm, making the M217.133.1 suitable for standard workshop measurement tasks. How fine is the display resolution? The instrument provides a 0.01 mm display resolution for routine dimensional checks and simple quality-control procedures. Is the caliper suitable for use in a busy shop environment? Yes, the IP 65 rating together with hardened stainless-steel construction means the caliper withstands dust and water exposure common in production environments. Which data output is available for measurement logging? This model is fitted with an RB 6 data output to enable integration with data-collection systems and documentation workflows. Does the caliper include fine adjustment for delicate positioning? The unit includes a fine‑adjustment thumbwheel to permit precise incremental movement and improved repeatability during measurements. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Workshop Caliper With 90mm Pointed Jaws, Fine Adjustment, Inductive System, IP65, Stainless Hardened Steel, Delivered In Case - Metav IndustryLine
The combination of workshop‑grade IP65 protection, an inductive digital measuring system and precise fine adjustment ensures reliable, repeatable measurements for everyday metalworking tasks; order directly via Metav Werkzeuge or consult the Metav team for configuration and delivery. M217.133 Digital Workshop Caliper – 300 mm range, IP65, Metav IndustryLine The M217.133 is a robust digital workshop caliper engineered for industrial bench and machine‑shop use, offering a 0–300 mm measuring range and a 90 mm jaw length for versatile external and depth measurements. IP65-rated for workshop environments Inductive digital system with mm/inch display Fine adjustment and 90 mm jaw length Stainless hardened construction, 0–300 mm range Precision and repeatability that speeds up inspection cycles This digital caliper combines an inductive measuring system with a standard resolution of 0.01 mm, delivering stable readings under routine workshop conditions. The inductive sensor reduces wear compared with mechanical ramps, which maintains accuracy over prolonged use and lowers recalibration frequency; this translates into fewer interrupted production checks and a clearer quality record. The integrated fine adjustment mechanism allows controlled jaw movement for repeatable contact pressure, helping to reduce measurement scatter during series checks and boosting throughput in quality control. Robust design for harsh workshop environments Constructed from stainless hardened steel and rated IP65, the instrument withstands dust and low‑pressure water jets common in industrial settings. The sealed electronics and corrosion‑resistant surfaces mean the caliper remains serviceable where coolants, oils or dusty conditions are present. Delivered in a protective case for transport, the unit is ready for secure storage between shifts and is built to retain calibration over time, supporting reliable inspection routines on the shop floor. Practical controls and data handling for traceable workflows The large digital display supports mm/inch switching and the keypad provides HOLD, SET, ON/OFF and DATA functionality for simple in‑line operation and documentation. A dedicated data output interface (RB 6) enables direct connection to dataloggers or measuring software, reducing manual transcription and the risk of transcription errors. For workshop teams that collect measurement records, this direct output capability speeds logging and integrates the tool into an organised inspection process. Suits standard workshop measurement needs with professional benefits Classified as a standard range caliper, the 300 mm span offers the best compromise between reach and stiffness for general machining and assembly tasks. At a weight of 0.9 kg and a 90 mm jaw length, the instrument is stable in use yet manageable for single‑hand operation during repetitive checks. The overall design supports faster decision‑making at the production line: fewer rejects, clearer documentation and a durable measuring instrument that reduces long‑term operating costs through robust construction and reduced maintenance. Contact Metav Werkzeuge for tailored advice on integrating the M217.133 into existing inspection routines or for assistance with compatibility to data capture systems Technical Data Article number: M217.133 GTIN: 4054469146904 Tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Measuring range: 0–300 mm Resolution: 0.01 mm Inch resolution: 0.0005 in Weight: 0.9 kg Jaw length: 90 mm Protection class: IP 65 Special features Material: stainless hardened steel Measuring system: inductive Digital display keys: mm/inch, HOLD, SET, ON/OFF, 0/INC, DATA Fine adjustment mechanism Data output: RB 6 Delivered in a protective case for transport FAQ What accuracy can be expected from this caliper? The M217.133 digital workshop caliper provides a standard resolution of 0..01 mm; its inductive system and fine adjustment help maintain consistent repeatability for routine workshop inspections. Is the caliper suitable for use in wet or dusty production areas? Yes. The IP65 rating means the instrument is protected against dust ingress and low‑pressure water jets, making it well suited to typical workshop and machine‑shop environments. Can measurement data be exported directly to a PC or datalogger? Yes. The M217.133 is equipped with an RB 6 data output interface and a DATA key on the display, allowing direct connection to data capture hardware or software for streamlined documentation. What is included with delivery? Delivery includes the caliper in a protective case for transport; the set comprises the instrument, protective case and standard documentation relevant to the workshop‑grade caliper. Is the caliper appropriate for general engineering and metalworking tasks? Designed as a standard‑range workshop caliper, the M217.133 is intended for general machining, assembly and inspection work where a balance of reach, stiffness and ease of handling is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper With Pointed Jaws, Fine Adjustment, Hardened Stainless Steel, 0.02mm Vernier, Supplied In Case - Metav IndustryLine
Combining a hardened stainless steel body with a fine-adjustment mechanism and a 0.02 mm vernier scale delivers repeatable workshop measurements for daily production tasks; order the caliper directly via Metav Werkzeuge or consult the Metav specialists for procurement and application advice. Workshop Caliper M201.303 – stainless, hardened, 300 mm with fine adjustment Workshop Caliper M201.303 is a robust analogue caliper designed for accurate outside, inside and step measurements across general metalworking and assembly tasks. Hardened stainless steel construction Precision scale with 0.02 mm resolution Fine-adjustment thumb screw Monoblock frame with 100 mm jaws Built to last for everyday workshop use The slide and frame are made from stainless steel, hardened for wear resistance and fitted with a matt-chromed scale to reduce glare and preserve legibility under harsh workshop lighting. The monoblock design increases rigidity and reduces torsion during use, which helps maintain measurement accuracy over time. At approximately 0.7 kg, the instrument balances solidity with manageable handling, and the extended 100 mm jaws allow secure gripping of workpieces without sacrificing control. Precise reading and controlled contact force Equipped with a vernier scale that offers 0.02 mm resolution, the caliper ensures measurements that meet typical workshop tolerances. The dual vernier layout provides finely graduated readings—metric graduations supported by a clear secondary scale—while the dedicated fine-adjustment thumb screw permits delicate sliding for exact closure and alignment. These features reduce reading errors and enable reliable measurements for component checks, setup tasks and quality control where consistent, reproducible results are required. Designed for standard workshop ranges and practical use With a measuring range of 0–300 mm, the instrument falls into the Standard category, offering the best compromise between reach and stiffness for everyday machine‑shop and metal‑fabrication work. The caliper is intended for routine dimensional checks on shafts, housings and machined parts, and its construction supports use in fabrication, maintenance and small-series production environments. The tool is delivered to factory standard; the supplied configuration reflects workshop expectations for durability and simple, low‑maintenance operation. Choose the Metav IndustryLine caliper for robust, accurate measurements and contact Metav Werkzeuge for tailored advice and reliable supply direct from Emmerich. Technical Data SKU: M201.303 GTIN: 4054469101262 Weight: 0.7 kg Material: stainless steel, hardened with matt‑chromed scale Label: Workshop Caliper 300 x 100 x 0.02 mm Dimensions & Performance Measuring range: 0–300 mm Jaw length: 100 mm Resolution: 0.02 mm Vernier: top 1/1000 inch, bottom 1/50 mm Tariff number: 90173000 Special features For external, internal and step measurement Monoblock frame for increased rigidity Fine-adjustment thumb screw Factory standard (Werksnorm) Analogue vernier instrument FAQ What measuring range does this caliper cover? The Workshop Caliper M201.303 covers a measuring range of 0–300 mm and is classified in the Standard category for general machine‑shop use. Which materials is the caliper suitable for inspecting? The stainless steel, hardened construction of this vernier caliper makes the instrument suitable for routine inspection of steel, aluminium and similar workshop materials. How fine are the vernier graduations and what accuracy is expected? The vernier provides a 0.02 mm resolution; with correct technique this enables repeatable workshop measurements that meet common machining tolerances. Does the instrument include a fine adjustment for precise sliding? Yes, the caliper features a fine‑adjustment thumb screw to permit controlled sliding and exact alignment when taking measurements. Is this caliper suitable for internal and step measurements as well as outside checks? Yes, the design supports external, internal and step measurements, making it versatile for component inspection and setup tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper With Pointed Jaws, Fine Adjustment, Monoblock, Stainless Hardened Scale, 0.05mm - Metav IndustryLine
Take advantage of the combination of hardened stainless steel, monoblock rigidity and a precise fine adjustment for dependable workshop measurements; order directly via Metav Werkzeuge or contact our consultants for specification advice. Workshop caliper with pointed jaws M201.331.1 — 300 mm, fine adjustment (Metav IndustryLine) The Workshop caliper with pointed jaws M201.331.1 is an analogue precision instrument designed for standard workshop measurements and component inspection, offering robust construction and a vernier scale for reliable repeatability. Monoblock design for enhanced stiffness Hardened stainless steel construction Fine adjustment for precise readings Built for reliable daily use The instrument combines a hardened stainless steel construction with a monoblock design, yielding a rigid beam that resists bending during typical workshop handling. This configuration reduces measurement variation caused by flexing and supports reproducible results across routine inspection tasks. The matt-chromed scale improves legibility under workshop lighting, while the pointed jaw geometry permits access to tight grooves and small features that blunt jaws cannot reach, so tasks such as checking small machined features are carried out with greater confidence. How the analogue vernier supports precise readings This analogue caliper uses a vernier arrangement with a practical resolution of 0.05 mm, backed by a dual-scale nonius: 1/128" on the upper scale and 1/20 mm on the lower scale. The inclusion of a fine adjustment screw enables controlled closure of the jaws, limiting operator-induced error during final reading. The measuring geometry and scale conformity follow DIN 862 for the given jaw length, ensuring the device meets recognised workshop standards for vernier calipers and making interpretation straightforward even for users more familiar with metric indications. Practical handling, protection and workshop suitability With a 300 mm measurement range, this caliper sits in the Standard class — the versatile length preferred across general mechanical and metalworking shops for its balance of reach and stiffness. Delivery in a protective case ensures safe transport and storage, protecting the sliding surfaces and scale during routine movement between workstations. The combination of corrosion-resistant material and a robust finish reduces maintenance needs, promoting long service life in industrial environments where tools are subject to frequent use. Contact Metav Werkzeuge for tailored advice and to secure the Metav IndustryLine workshop caliper M201.331.1 for your toolroom or production line Technical Data Article number: M201.331.1 GTIN: 4054469101668 eCl@ss: 21170344 Label: Werkstatt-Messschieber mit Spitze 300x150x0,05mm rostfrei, mit Feineinstelung, Monoblock, 0,78 kg Facts Measurement range: 0–300 mm Jaw length: 150 mm Resolution: 0.05 mm Vernier: 1/128" (upper) and 1/20 mm (lower) Customs tariff number: 90173000 Special features Material: hardened stainless steel with matt-chromed scale Monoblock design for increased stiffness Fine adjustment screw for controlled closing Analogue vernier (mechanical nonius) Pointed jaws for access to narrow features Protective case included Conforms to DIN 862 for the given jaw length FAQ What measurement range does this caliper cover? The Workshop caliper with pointed jaws M201.331.1 covers a measurement range of 0–300 mm, placing it in the Standard category for general workshop use. What accuracy and resolution can be expected? The instrument offers a practical resolution of 0.05 mm using an analogue vernier; the fine adjustment aids reproducible readings during final closure and measurement. Which materials and finishes are used on the device? The caliper is manufactured from hardened stainless steel and features a matt-chromed scale to enhance corrosion resistance and improve legibility in workshop conditions. Is a case supplied with the caliper? Yes, the M201.331.1 is supplied in a protective case suitable for transport and storage, helping to preserve the sliding surfaces and scale. Does the caliper follow recognised standards? The measuring geometry and scale conform to DIN 862 for the relevant jaw length, ensuring the device aligns with common workshop standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper Workshop Jawless 0.05mm Nonius Matt Chrome Scale, DIN 862 - Metav IndustryLine
Take advantage of a sturdy stainless steel construction, 0.05 mm vernier accuracy and a 300 mm measuring range for reliable workshop measurements; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. M201.392 Workshop Caliper — 300 mm range, 0.05 mm vernier (Metav IndustryLine) The M201.392 is a workshop caliper without pointed jaws, designed for general metalworking and routine dimensional checks in machine shops and toolrooms. 300 mm measuring range 0.05 mm vernier resolution Stainless steel construction, matt‑chromed scale DIN 862 compliant for workshop use Precision and durability for everyday workshop measurement The caliper provides a 300 mm measuring range combined with a 0.05 mm vernier resolution, meeting DIN 862 requirements for workshop instruments. Constructed from stainless steel with a matt‑chromed scale and vernier, the tool balances corrosion resistance with legible contrast on the scale. The extended jaw length (100 mm) improves contact stability, reducing deflection during routine measurements and supporting consistent results across typical machining and assembly tasks. Clear, reliable readings with analogue vernier operation An analogue vernier remains a dependable choice where battery‑free operation and mechanical simplicity are priorities. The graduated vernier offers a 0.05 mm indication and the inch subdivision of 1/128 inch for imperial reference marks. At approximately 0.7 kg, the instrument sits securely in the hand, aiding steady measurement transfer and repeatability. The absence of electronics also simplifies maintenance and long‑term availability of spare parts. Designed to suit workshop workflows and quality checks Made for everyday use in workshops and light industrial settings, the caliper’s material and finish tolerate common shop environments while preserving dimensional stability. The matt‑chrome scale reduces glare under workshop lighting, which helps operators read values faster and reduces misreads. Compliance with recognised standards and a robust build make this instrument a pragmatic choice for routine quality control and production measurement tasks. For a dependable, DIN‑compliant workshop caliper from Metav IndustryLine, contact Metav Werkzeuge for guidance or procurement—info@metav-werkzeuge.com or +49 2822 7131930; request the M201.392 for immediate dispatch. Technical data Article number: M201.392 GTIN: 4054469102108 Manufacturer: Metav IndustryLine Facts Measuring range: 0–300 mm Resolution (vernier): 0.05 mm Inch reading: 1/128 inch Jaw length: 100 mm Weight: 0.7 kg Standard: DIN 862 Tariff number: 90173000 Special features Material: stainless steel; scale and vernier matt‑chromed Analog vernier display (no batteries) Workshop version without pointed jaws eClass: 21170344 FAQ How precise is the M201.392 for routine workshop measurements? The M201.392 offers a vernier resolution of 0.05 mm and conforms to DIN 862, making it suitable for standard machine‑shop tolerances and general quality control. Does the caliper provide imperial readings? Yes. The analogue vernier includes an imperial subdivision equivalent to 1/128 inch for quick inch‑based references alongside metric measurements. Is the caliper suitable for metalworking environments? The caliper’s stainless steel construction and matt‑chromed scale are designed for workshop conditions and common metalworking applications; it is robust enough for daily use in machine shops. What measurements can be taken with this workshop caliper? The instrument supports typical caliper functions such as external and internal measurements and depth gauging, suitable for parts and assemblies within the 0–300 mm range. How does the M201.392 compare to digital calipers for shop use? As an analogue instrument, the M201.392 requires no batteries and offers mechanically straightforward, reliable readings; it is particularly valued where simplicity, durability and compliance with DIN 862 are preferred. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper Workshop Jawless 0.05mm Vernier With Fine Adjustment, Hardened Stainless Steel Case - Metav IndustryLine
Take advantage of precise daily measuring with a hardened stainless‑steel frame and a reliable 0.05 mm vernier — ideal for routine workshop tasks where robustness and clear readings matter. Benefit from the fine‑adjustment thumbwheel and the monoblock construction for steady, repeatable measurements. Order via Metav Werkzeuge or consult the Metav team for specification guidance. Metav IndustryLine Workshop Caliper M201.321.1 — 300 mm, hardened stainless, 0.05 mm resolution The Metav IndustryLine workshop caliper M201.321.1 is a durable analogue caliper designed for general machine‑shop and maintenance use, offering clear vernier readings and a precision thumbwheel for controlled jaws movement. Hardened stainless steel construction Fine‑adjustment thumbwheel for precise setting Vernier resolution of 0.05 mm Monoblock frame for increased stability Reliable workshop accuracy and practical classification The caliper is built for the standard range of workshop measuring tasks: its 0–300 mm span places it in the Standard category, offering the best compromise between reach and stiffness for everyday machine‑shop work. With an analogue vernier resolution of 0.05 mm, the instrument matches the industrial benchmark for mechanical calipers and is suitable for routine dimensional checks on assembled parts and components. The hardened stainless‑steel body resists wear and maintains measurement geometry, so readings stay consistent even after repeated daily use. Controlled setting and robust design for repeatable results A dedicated fine‑adjustment thumbwheel enables controlled closure of the jaws, reducing measurement scatter caused by manual over‑pressing and improving repeatability during series checks. The monoblock frame increases torsional rigidity compared with split‑body designs, improving stability when measuring longer jaws such as the 150 mm beak length supplied. The matt‑chromed scale reduces glare and eases reading under workshop lighting, while hardened surfaces extend service life under abrasive or oily conditions. Standards, scale and practical handling explained The vernier scale follows recognised workshop conventions and the instrument references DIN 862 for jaw geometries where applicable, which supports straightforward interpretation of mechanical tolerances on drawings. Reading the vernier at 0.05 mm resolution is intuitive for trained staff and provides the speed of analogue operation without dependence on batteries or electronics. The caliper’s simple mechanical design reduces downtime and maintenance requirements, making it a pragmatic choice for manufacturing, maintenance and toolroom environments. Choose the Metav IndustryLine workshop caliper for reliable everyday precision and contact Metav Werkzeuge in Emmerich for tailored advice and purchasing support Technical data Article number: M201.321.1 GTIN: 4054469101439 eClass: 21170344 Category: Calipers Label: Werkstatt‑Messschieber ohne Spitze 300x150x0,05mm rostfrei, mit Feineinstellung Facts Measuring range: 0–300 mm Maximum measuring range (mm): 300 Jaw (beak) length (mm): 150 Resolution: 0.05 mm SKU: M201.321.1 Special features Material: hardened stainless steel with matt‑chromed scale Construction: monoblock frame Scale type: analogue vernier Fine adjustment: thumbwheel for precise jaw control Norms: DIN 862 (applies up to specified jaw lengths) FAQ What measuring range does the Metav IndustryLine workshop caliper M201.321.1 cover? The Metav IndustryLine workshop caliper M201.321.1 covers a measuring range of 0–300 mm, placing it in the Standard class commonly used across machine shops and maintenance departments. What is the resolution and typical precision of the vernier on this caliper? The vernier provides a resolution of 0.05 mm, which corresponds to the industrially accepted analogue standard for mechanical calipers and suits most workshop tolerance checks. Which materials and finish are used on the M201.321.1 caliper? The caliper is manufactured from hardened stainless steel and features a matt‑chromed scale to reduce reflections and improve legibility in typical workshop lighting. Is the design of this caliper suited to frequent workshop use? The M201.321.1’s monoblock construction, hardened surfaces and fine‑adjustment thumbwheel make it well suited for frequent daily use, offering robust handling and repeatable measurements. Which scale standard applies to the jaws and how does this affect measurements? Jaw geometries reference DIN 862 where applicable, ensuring compatibility with conventional measurement practice and predictable functional behaviour for typical workshop applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper Workshop Version Fine Adjustment Stainless Steel Matt Chrome Scale DIN 862 - Metav IndustryLine
Benefit from a robust, hardened stainless steel construction, precise fine adjustment and vernier accuracy across a 0–300 mm range for reliable workshop measurements; order the instrument directly via Metav Werkzeuge or consult the Metav team for tailored advice. M201.321.2 Workshop Caliper — analogue vernier, 300 mm, fine adjustment (Metav IndustryLine) M201.321.2 is a workshop caliper designed for general machining and maintenance tasks, offering metric and imperial vernier readings and a robust monoblock construction for repeatable measurements up to 300 mm. Hardened stainless steel construction Fine-adjustment screw for controlled travel Vernier resolution 0.05 mm and 1/128" Monoblock frame for long-term stability Dependable precision for everyday workshop work The instrument provides reliable metrology where repeatability matters. Its hardened stainless steel body and matt‑chromed scale resist wear, so scale legibility and dimensional integrity are preserved in daily use. The caliper’s vernier arrangement gives a metric resolution of 0.05 mm (bottom scale) alongside an imperial 1/128" indication (top scale), which simplifies cross‑referencing between systems and reduces conversion errors during production. This combination of materials and scale design supports efficient quality control and lowers the risk of rework in routine machining and assembly. Robust design that reduces measurement uncertainty A monoblock construction minimises flex and improves stiffness along the length of the slide, while the integrated fine adjustment screw allows slow, controlled closing of the jaws for reproducible seating on the workpiece. The instrument’s jaw length of 100 mm gives a practical contact area for standard components, balancing reach and rigidity—attributes that maintain consistent results across repeated cycles. The analogue vernier layout avoids electronic dependency, making the caliper exceptionally suitable for workshop environments where robustness and low maintenance are priorities. Clear reading and standards-based manufacture Graduated according to accepted norms, the caliper complies with DIN 862 for the specified jaw dimensions, ensuring compatibility with established inspection practices. The vernier principle is straightforward to apply: align the zero for coarse reading and read the vernier for fine increments to obtain the measurement with 0.05 mm precision; the imperial vernier provides an additional quick-check in inches. For technicians familiar with mechanical measuring tools, the analogue format delivers a direct, tactile measuring experience that is both predictable and serviceable. Contact Metav Werkzeuge for further specification details or ordering support — Metav’s Emmerich location ensures consistent supply and pragmatic advice for workshop measurement needs: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M201.321.2 GTIN: 4054469101446 ECLASS: 21170344 Facts Measuring range: 0–300 mm Jaw length: 100 mm Resolution/vernier: 1/20 mm (0.05 mm) bottom; 1/128" top Norm: DIN 862 (for applicable jaw lengths) Analogue instrument, vernier type Special features Material: hardened stainless steel with matt‑chromed scale Fine‑adjustment screw Monoblock frame for improved stiffness Designed for outside, inside and step measurements FAQ How precise is the reading on this workshop caliper? The caliper delivers a metric vernier resolution of 0.05 mm (1/20 mm) and an imperial vernier of 1/128", providing workshop‑grade precision suitable for standard machine‑shop quality checks. Is the caliper suitable for daily shop use and harsher environments? Yes; the hardened stainless steel construction and matt‑chromed scale enhance durability and legibility, making the instrument well suited to regular workshop conditions. Does the instrument follow a recognised norm? The design follows DIN 862 requirements for the applicable jaw lengths, ensuring that dimensional references and inspection practices remain compatible with industry standards. What is the benefit of the fine‑adjustment screw? The fine adjustment allows controlled jaw travel for reproducible contact and reduced operator‑induced variation, improving measurement consistency on delicate or small contact surfaces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Werkstatt-Messschieber mit Spitzen, 0,02mm, Feineinstellung, Werksnorm - Metav IndustryLine
Die außerordentlichen Bewertungen von Metav Werkzeuge stehen für über 42.000 glückliche Kunden. Probiere es aus und shoppe auf metav-shop.de.! HIGHLIGHTS für Metav IndustryLine Werkstatt-Messschieber mit Spitzen Messbereich: bis 300mm Ablesung: 0,02mm Material: Spezialstahl, Skala und Nonius mattverchromt : 0 bis 300mm - Reichweite, die passt Mit bis 300mm steht ein ausgewogener Rahmen für häufige Prüfaufgaben bereit. Werkstücke unterschiedlicher Länge bleiben innerhalb eines komfortablen Fensters. Im Maschinen- und Metallbau führt der Bereich zu klaren Ergebnissen bei minimalem Aufwand. Die Abläufe wirken aufgeräumt und wiederholgenau. Das stärkt Qualität und Tempo gleichermaßen. Unsere Definition der EInteilung der Messbereiche. Klassifizierung Messbereiche beim Messschieber.. Werksnorm Unser Werkstatt-Messschieber wird vollständig nach den einschlägigen DIN-Normen gefertigt – sämtliche Materialien, Fertigungs- und Kalibrierverfahren entsprechen den Anforderungen der Werksnorm. Damit sind Maßhaltigkeit und Wiederholgenauigkeit garantiert, Prüfzertifikate sind international kompatibel, und Audits oder Kundenfreigaben lassen sich deutlich schneller durchlaufen. Die DIN-Konformität sichert konstante Qualität, erleichtert die weltweite Einsetzbarkeit und stärkt das Vertrauen in jedes einzelne Messergebnis. Die Premium Messwerkzeuge von Metav IndustryLine werden von unseren Experten für Messwerkzeuge empfohlen. Metav IndustryLine steht für Premium Messwerkzeuge zu einem annehmbaren Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Produktdetails: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber Bestellnummer: M201.022 Zahlen & Fakten: Messbereich: 0-300mm Gewicht: 0,7kg Norm: Werksnorm Schnabellänge: 60mm Ablesung: 0,02mm Ausführungen Ausführung: analog Material: Spezialstahl, Skala und Nonius mattverchromt Lieferung im Kasten mit Feineinstellung mit Spitzen Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Erwägungen beim Beschaffen eines Messschiebers: Neben der Präzision und dem Betriebsbereich sind erweiterte Eigenschaften wie die Funktionalität zum Datenoutput oder die Messkraftverwaltung von großer Signifikanz. Im Umfeld der Qualitätssicherung und in Laboreinrichtungen ist ein Messschieber mit kontrollierter Anwendungskraft besonders hilfreich. Des Weiteren ist die Überlegung entscheidend, ob eine Kalibrierung gewünscht ist. Eine Kalibrierung kann direkt nach Lieferung vorgenommen werden und sollte zur Sicherung der Prozessqualität jedes Jahr erneuert werden. Pflegehinweis - damit Sie lange etwas von Ihrem Messwerkzeug von Metav IndustryLine haben: Werkstatt-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
300mm Werkstatt-Messschieber mit Spitzen, 0,05mm, Feineinstellung, Werksnorm - Metav IndustryLine
Die exzellenten Bewertungen von Metav Werkzeuge stehen für mehr als 42.000 begeisterte Kunden. Überzeuge Dich selbst und bestelle bei metav-shop.de! Das wichtigste mit Spitzen Messbereich: bis 300mm Ablesung: 0,05mm Material: Spezialstahl, Skala und Nonius mattverchromt : –300mm - Reichweite, die passt Mit bis 300mm steht ein ausgewogener Rahmen für häufige Prüfaufgaben bereit. Werkstücke unterschiedlicher Länge bleiben innerhalb eines komfortablen Fensters. Im Maschinen- und Metallbau führt der Bereich zu klaren Ergebnissen bei minimalem Aufwand. Die Abläufe wirken aufgeräumt und wiederholgenau. Das stärkt Qualität und Tempo gleichermaßen. Unsere Definition der EInteilung der Messbereiche. Klassifizierung Messbereiche beim Messschieber.. Werksnorm Alle Komponenten unseres Werkstatt-Messschieber werden konsequent gemäß Werksnorm gefertigt. Die Norm definiert präzise Vorgaben für Werkstoffe, Toleranzen, Fertigungsabläufe und Kalibrierprotokolle. Durch die strikte Einhaltung dieser Spezifikationen sichern wir Maßhaltigkeit, Reproduzierbarkeit und die weltweite Anerkennung der Prüfzertifikate – entscheidende Faktoren für Audit- und Freigabeprozesse. Die Premium Messwerkzeuge von Metav IndustryLine werden von unseren Experten für Messwerkzeuge empfohlen. Metav IndustryLine steht für hervorragende Messwerkzeuge zu einem annehmbaren Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Feineinstellung Die Feineinstellung (auch Feinverstellung) ist eine kleine Rändel- oder Daumenschraube, über die der bewegliche Schieber eines Messschiebers mit sehr feinen, kontrollierten Schritten verfahren wird. Damit kann man die Backen genau und ohne Spiel anlegen, die Messkraft stabil halten und den Messwert einstellen, ohne dass man versehentlich darüber hinaus misst. Dies führt zu höherer Genauigkeit, besserer Wiederholbarkeit der Messergebnisse und erhöhter Benutzerfreundlichkeit, vor allem bei großen oder besonders hochwertigen Werkstatt-Messschiebern. Unsicher, ob das Werkzeug das Richtige ist? Oder fehlen technische Daten? Sprechen Sie uns einfach an! 📧 eMail: info@metav-werkzeuge.com, ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Produktmerkmale: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber Bestellnummer: M201.021 Zahlen / Daten: Messbereich: 0 bis 300mm Gewicht: 0,7kg Norm: Werksnorm Schnabellänge: 60mm Ablesung: 0,05mm Besonderheiten Ausführung: analog Material: Spezialstahl, Skala und Nonius mattverchromt Lieferung im Kasten mit Feineinstellung mit Spitzen Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Zu beachtende Faktoren beim Erwerb eines Messschiebers: Die zusätzliche Ausstattung, darunter Datenausgänge und Messkraftkontrollen, erlangt neben der Genauigkeit und dem Messbereich erhebliche Bedeutung. Das Arbeiten mit einem Messschieber, der eine exakt eingestellte Messkraft aufweist, ist in der Qualitätssicherung und bei Labortätigkeiten von großem Nutzen. Man sollte auch berücksichtigen, ob der ausgewählte Messschieber kalibriert werden muss. Die Möglichkeit zur Kalibrierung besteht unmittelbar bei Entgegennahme; zur Sicherstellung der Prozessstabilität sollte regelmäßig jährlich neu kalibriert werden. Pflegehinweis - damit Sie lange etwas von Ihrem Messwerkzeug haben: Werkstatt-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
300mm Werkstatt-Messschieber mit Spitzen, 0,05mm, Feineinstellung, Werksnorm - Metav IndustryLine
Der von Ludwig Josef Bayer 1989 gegründete Traditionsvertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für Premium-Messwerkzeuge zu einem kleinem Preis. HIGHLIGHTS mit Spitzen Messbereich: bis 300mm Ablesung: 0,05mm Material: Spezialstahl, Skala und Nonius mattverchromt Routinen stärken mit Mit von 0 – 300mm decken den Bedarf im Tagesgeschäft zuverlässig ab. Flächen, Kanten und Abschnitte lassen sich sicher ansteuern, auch bei wechselnden Geometrien. Der Bereich unterstützt strukturierte Abläufe im Maschinen- und Metallbau und hält Reserven für Sonderfälle bereit. Gleichmäßige Messfolgen bringen Ruhe in die Fertigung. So bleibt Präzision planbar – vom ersten Griff bis zur Freigabe. Unsere Definition der EInteilung der Messbereiche. Klassifizierung Messbereiche beim Messschieber.. Werksnorm Gefertigt nach Werksnorm: Unser Messwerkzeug erfüllt alle Normvorgaben für Material, Fertigung und Kalibrierung. So sind Präzision, Wiederholgenauigkeit und internationale Zertifizierung jederzeit gewährleistet – für reibungslose Audits und uneingeschränktes Vertrauen. Die Messwerkzeuge von Metav IndustryLine werden von unseren Profis für Messwerkzeuge empfohlen. Metav IndustryLine steht für Premium Messwerkzeuge zu einem unschlagbaren Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Sie wissen nicht genau, ob dieses Werkzeug zu Ihrer Anwendung passt? Oder Ihnen fehlen noch wichtige technische Details? Kein Problem! Kontaktieren Sie uns – wir beraten Sie gerne. ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Produkteigenschaften für den Werkstatt-Messschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber Bestellnummer: M201.031 Fakten zum Werkzeug: Messbereich: 0-300mm Gewicht: 0,7kg Norm: Werksnorm Schnabellänge: 90mm Ablesung: 0,05mm Besonderheiten Ausführung: analog Material: Spezialstahl, Skala und Nonius mattverchromt Lieferung im Kasten mit Feineinstellung mit Spitzen Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf man achten sollte, wenn man einen Messschieber kaufen möchte: Während Präzision und Messbereich wesentliche Aspekte sind, darf die Berücksichtigung von Funktionen wie Datentransfer und Messkraftkontrolle nicht unterschätzt werden. Messschieber mit spezifizierter Messkraft bietet insbesondere bei Qualitätssicherungsprozessen und in laboratory setups Vorteile. Des Weiteren ist die Überlegung entscheidend, ob eine Kalibrierung gewünscht ist. Die Möglichkeit zur Kalibrierung besteht unmittelbar bei Entgegennahme; zur Sicherstellung der Prozessstabilität sollte regelmäßig jährlich neu kalibriert werden. Pflegehinweis - damit Sie lange etwas von Ihrem Werkstatt-Messschieber von Metav IndustryLine haben: Werkstatt-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
300mm Werkstatt-Messschieber, 0,05mm, Werksnorm - Metav IndustryLine
Die hervorragenden Bewertungen von Metav Werkzeuge stehen für über 42.000 hochzufriedene Kunden. Überzeuge Dich selbst und bestelle bei metav-shop.de! Verlässlich im Alltag 300mm schaffen genau die Reichweite, die im Alltag am häufigsten gebraucht wird. Von der Vormontage bis zur Endprüfung bleibt der Zugriff auf relevante Maße erhalten. Der Bereich passt zu den Anforderungen im Maschinen- und Metallbau und sorgt für gleichmäßige Qualität. Messfolgen bleiben übersichtlich und planbar. Das reduziert Stillstände und hält Projekte auf Kurs. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber.. Verlässliche Präzision durch Fertigung nach weltweit gültigen Standards Unser Messwerkzeug basiert vollständig auf den Richtlinien der Werksnorm. Dies betrifft sämtliche Produktionsschritte und Kalibrierverfahren ebenso wie die eingesetzten Materialien. Die so gewährleistete Maßhaltigkeit und Wiederholgenauigkeit sorgt für einheitliche Qualitätsstandards und internationale Vergleichbarkeit – ein entscheidender Vorteil bei Audits und Kundenfreigaben. Expertenrat: Wie pflegt und lagert man einen analogen Messschieber? Nach Gebrauch leicht ölen (säure- und harzfreies Feinöl) und in der Kassette staub- sowie korrosionsgeschützt aufbewahren. Bei „hakendem“ Lauf hilft ein Tropfen Öl auf Führungsschiene und Schieber. Sie sind unsicher, ob das Werkzeug für Ihre Anwendung geeignet ist? Oder benötigen Sie weitere technische Informationen? Kein Problem – sprechen Sie uns gerne an! 📧 eMail: info@metav-werkzeuge.com, ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Spezifikationen zumWerkstatt-Messschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber leichte Ausführung Bestellnummer: M201.375 Fakten zum Werkzeug: Messbereich: 0 bis 300mm Gewicht: 0,8kg Norm: Werksnorm Schnabellänge: 100/36mm Ablesung: 0,05mm Ablesung in Inch/Zoll: 1/128 Besonderheiten Ausführung: analog Material: rostfreier Stahl, Skala und Nonius mattverchromt leichte Ausführung Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Wichtige Aspekte beim Erwerb eines Messschiebers: Neben Genauigkeit und Messbereich spielen Zusatzfunktionen wie Datenausgang oder Messkraftkontrolle eine wichtige Rolle. Der Einsatz eines Messschiebers mit kontrollierter Messkraft ist besonders in der Qualitätssicherung und in Laborumgebungen vorteilhaft. Des Weiteren ist die Überlegung entscheidend, ob eine Kalibrierung gewünscht ist. Bereits bei der Zustellung ist eine Kalibrierung möglich, und für die Garantie der Prozesssicherheit sollte diese jährlich wiederholt werden. Pflegehinweis - damit Sie lange etwas von Ihrem Messwerkzeug haben: Werkstatt-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
300mm Werkstatt-Messschieber, 0,05mm, Werksnorm - Metav IndustryLine
Die exzellenten Bewertungen von Metav Werkzeuge stehen für viele loyale Kunden. Probiere es aus und shoppe auf metav-shop.de.! Das wichtigste auf einen Blick Messbereich: bis 300mm Ablesung: 0,05mm Material: rostfreier Stahl, Skala und Nonius mattverchromt leichte Ausführung MESSBEREICH} mm – von der Vorbereitung bis zur Freigabe Der Bereich 0 – 300mm schließt typische Kontrollpunkte im Arbeitsalltag ein. Messungen lassen sich zielgerichtet durchführen, ohne Umwege und ohne Zeitverlust. Im Maschinen- und Metallbau trägt das zu verlässlichen Entscheidungen in jeder Fertigungsstufe bei. Ergebnisse sind gut vergleichbar und schnell dokumentiert. So bleibt der Prozess stabil, auch bei wechselnden Losgrößen. Unsere Definition der EInteilung der Messbereiche. Klassifizierung Messbereiche beim Messschieber.. Immer die richtige Toleranz durch Fertigung nach weltweit gültigen Standards Verlassen Sie sich auf Präzision, die weltweit Standards setzt: Unser Metav IndustryLine Werkstatt-Messschieber erfüllt die Anforderungen der Werksnorm in jedem Detail – von der Materialauswahl über die Fertigung bis hin zur Kalibrierung. Damit garantieren wir exakte Messergebnisse, internationale Zertifikate und höchste Akzeptanz bei Audits und Kundenabnahmen. Qualität, der Sie vertrauen können. Fachhinweis: Wie stelle ich planparallelen Kontakt sicher? Messschenkel müssen vollständig anliegen; kippt der Schieber, entsteht ein systematischer Kippfehler. Bei Innenmessungen zusätzlich prüfen, ob beide Kreuzschnäbel anliegen. Sie sind unsicher, ob das Werkzeug zu Ihrer Anwendung passt?? Oder es fehlen Ihnen noch technische Daten?? Kein Problem, sprechen Sie uns an!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Informationen zur technischen Ausstattung zumWerkstatt-Messschieber von Metav IndustryLine: Bestellnummer: M201.372 Messbereich: 0-300mm Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber leichte Ausführung Ausführung: analog Gewicht: 0,7kg Material: rostfreier Stahl, Skala und Nonius mattverchromt Norm: Werksnorm Schnabellänge: 100mm Ablesung: 0,05mm Ablesung in Inch/Zoll: 1/128 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf es beim Messschieberkauf ankommt: Neben der Präzision und dem Messbereich sind zusätzliche Funktionen wie ein Datenausgang oder die Messkraftüberwachung entscheidend. Der Einsatz eines Messschiebers mit kontrollierter Messkraft ist besonders in der Qualitätssicherung und in Laborumgebungen vorteilhaft. Daneben ist wichtig zu prüfen, ob ein kalibrierter Messschieber benötigt wird. Man kann die Kalibrierung bei Lieferung vornehmen und aus Gründen der Prozesskontinuität alle 12 Monate erneuern.
300mm Workshop Caliper With Point 0.05mm Resolution Matt Chrome Scale, DIN 862 - Metav IndustryLine
Take advantage of the combination of robust stainless‑steel construction, a 0.05 mm analogue vernier and a 0–300 mm measuring range for reliable, repeatable shop‑floor checks. Order the instrument directly via Metav Werkzeuge or ask the consultants for application advice. Workshop caliper M201.395 — 300 mm analogue vernier, 0.05 mm resolution, Metav IndustryLine A Workshop caliper M201.395 designed for everyday machine‑ and metalworking measurement tasks, offering a durable stainless‑steel build and a clear matt‑chrome scale compliant with DIN 862 Analogue vernier with 0.05 mm resolution Measuring range 0–300 mm for workshop use Jaw length 100/40 mm for versatile gripping Stainless steel construction, matt chrome scale Reliable measurements for standard workshop work This caliper belongs to the standard measuring class (measuring range up to 300 mm) and is optimised for routine use in machine shops and metalworking environments. The analogue vernier provides a reading step of 0.05 mm, which corresponds to the common industrial accuracy for mechanical calipers under DIN 862; this means the instrument is suited to general production and inspection tasks where repeatable, traceable results are required. For operators less familiar with vernier scales, the reading method is straightforward: align the vernier marks against the main scale and read the combined value. The practical benefit is a maintenance‑free gauge that requires no batteries and gives dependable dimensional control across a broad range of components. Durable construction and practical jaw geometry for everyday handling Built from stainless steel with a matt‑chrome finish on the scale and vernier, the instrument resists corrosion and keeps graduations legible under workshop conditions. The specified 100/40 mm jaw geometry supports both broad external measurements and finer contact points for smaller features, improving contact stability and reducing measurement scatter. The caliper’s mass (about 0.8 kg) gives it a reassuring feel and helps stabilise readings during one‑handed use; users benefit from improved tactile control and fewer erroneous measurements due to flex. The solid construction also means less frequent replacement and lower long‑term tooling cost for routine shop inspection. Simple integration into workshop routines and clear operational advantages As an analogue instrument the caliper offers immediate readiness: no batteries, no electronic failure modes and straightforward operation for staff on the shop floor. Its 0–300 mm span covers the most common workshop needs—making it a practical single tool for many jobs where portable, accurate measurement is required. The mechanical vernier is easy to maintain and calibrate to workshop quality systems; compliance with DIN 862 supports documentation and quality audits. For procurement and workshop managers the consequence is predictable performance with minimal operational overhead and a tool that integrates smoothly into standard measuring procedures. For robust, no‑nonsense workshop measurement choose the Metav IndustryLine caliper — contact Metav Werkzeuge for product advice or to place an order via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M201.395 GTIN: 4054469102146 eClass: 21170344 Facts Measuring range: 0–300 mm Resolution / reading: 0.05 mm Weight: 0.8 kg Jaw length: 100/40 mm Tariff number: 90173000 Special features Material: stainless steel; scale and vernier matt chrome‑plated Norm: DIN 862 Analogue vernier (mechanical) Workshop type caliper, standard measuring class (0–300 mm) FAQ What accuracy can be expected from this caliper? The analogue vernier provides a reading step of 0.05 mm; under DIN 862 this corresponds to the industrial standard precision for mechanical calipers and is suitable for general workshop inspection. Is the caliper suitable for both internal and external measurements? Yes, the jaw geometry (100/40 mm) allows reliable external and internal contact measurements as well as step measurements typical in machine‑shop checks. Does the instrument require batteries or electronic maintenance? No; the mechanical vernier operates without batteries, eliminating electronic maintenance and ensuring immediate readiness on the shop floor. Can this caliper be used in quality documentation and audits? The caliper is manufactured to DIN 862, supporting integration into standard quality procedures and audit documentation for routine checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Workshop Caliper With Pointed Jaws 0.05mm Vernier, Fine Adjustment, Stainless Hardened Monoblock, Supplied In Case - Metav IndustryLine
Take advantage of the combination of a 300 mm measuring range, hardened stainless steel construction and a monoblock frame with fine-adjustment for consistent workshop results; supplied ready for daily use in a protective case. Order the Metav IndustryLine workshop caliper M201.331.2 directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine Workshop Caliper M201.331.2 — 300 mm, hardened stainless steel, analogue The Metav IndustryLine Workshop Caliper M201.331.2 is an analogue vernier caliper designed for robust workshop measurement tasks, offering fine adjustment and a rigid monoblock frame for repeatable readings across a broad range of metalworking applications. Hardened stainless steel construction Fine-adjustment thumb screw Monoblock frame for stability Supplied in protective case Built for reliable workshop measurement The caliper is engineered for the everyday demands of machine and metal workshops: a measuring range of 0–300 mm places it in the standard category where reach and stiffness are balanced for general assembly and part inspection. The body is manufactured from hardened stainless steel with a matt‑chrome scale, which improves legibility under workshop lighting and resists corrosion in humid or oily environments. The monoblock design reduces local flexing and increases longitudinal stiffness, so measurements remain consistent even during repetitive use. Supplied in a protective case, the instrument is ready for transport and safe storage between shifts. Vernier precision and fine adjustment for repeatable results This analogue caliper uses a dual vernier scale: 1/128" (upper) and 1/20 mm (lower), the latter corresponding to a vernier resolution of 0.05 mm, which matches industrial workshop standards for general dimensional control. The integrated fine‑adjustment thumb screw allows small, controlled movements of the slider for exact alignment on the workpiece, reducing overshoot and subsequent rework. Because the jaw length is 100 mm, the instrument complies with DIN 862 requirements applicable to jaw lengths up to 200 mm, supporting confident traceability of routine checks and incoming inspections. Practical handling that speeds daily workflows Ergonomics have been considered to keep handling straightforward: the matt finish on the scale reduces reflection, while the smooth slider action combined with the fine‑adjustment mechanism allows single‑handed positioning and measured closure on small features. The caliper’s pointed tips are useful for accessing grooves and narrow profiles where standard flat jaws struggle, while the robust construction tolerates typical shop-floor activity. Clear scale markings and tactile control contribute to faster measurement cycles and fewer alignment errors, supporting efficient production and quality assurance. For reliable workshop measurements choose the Metav IndustryLine Workshop Caliper M201.331.2 and contact Metav Werkzeuge GmbH in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for supply and expert advice Technical data Article number: M201.331.2 GTIN: 4054469101675 ECLASS: 21170344 Customs tariff number: 90173000 Core specifications Measuring range: 0–300 mm Minimum range: 0 mm Jaw length: 100 mm Vernier: 1/128" (upper) and 1/20 mm (lower) Materials & features Material: hardened stainless steel with matt‑chrome scale Monoblock frame Fine adjustment mechanism Pointed tips Analogue vernier caliper Supplied in protective case Conforms to DIN 862 (jaw length ≤ 200 mm) FAQ How precise is the Metav IndustryLine workshop caliper M201.331.2? The vernier arrangement yields a 0.05 mm resolution via the 1/20 mm scale; the combination of hardened construction and monoblock frame supports stable repeatability for standard workshop tolerances. Which types of measurement are possible with this caliper? The caliper performs external, internal and step measurements using its conventional jaw geometry and pointed tips, making it suitable for a broad set of routine workshop checks. Does the caliper conform to any norms for manual vernier calipers? With a jaw length of 100 mm, the instrument aligns with DIN 862 criteria applicable to that jaw length, which underpins its suitability for standard inspection tasks. Is the fine‑adjustment mechanism important for day‑to‑day use? Yes — the fine‑adjustment on the M201.331.2 enables controlled slider movement for exact seating on features, reducing measurement scatter and accelerating repetitive measurement cycles. What care is recommended to maintain accuracy? Regular cleaning of the sliding surfaces, avoidance of corrosive contaminants and gentle operation of the fine‑adjustment screw will preserve the matt‑chrome scale and the mechanical integrity of the caliper. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Workshop Caliper With Pointed Jaws Fine Adjustment Monoblock 0.05mm Vernier, Hardened Stainless Steel, Cased - Metav IndustryLine
Take advantage of a hardened stainless-steel construction, precise 0.05 mm vernier resolution and a fine‑adjustment screw for repeatable workshop measurements; the monoblock design increases stiffness for everyday use. Order the M201.331 workshop caliper directly via Metav Werkzeuge or ask our consultants if needed. M201.331 Workshop caliper — 300 mm, hardened stainless steel (Metav IndustryLine) A M201.331 workshop caliper engineered for standard metalwork and maintenance tasks, offering a 300 mm measuring range, fine adjustment and pointed jaws. 300 mm measuring range for workshop standards Hardened stainless-steel construction Fine-adjustment screw for exact positioning Supplied in protective case for transport Robust construction for dependable daily use Built as a standard-class measuring instrument for the workshop, this caliper combines a monoblock body with hardened stainless steel to resist wear and maintain alignment over time. The 300 mm range places the tool in the Standard category (measuring range up to 100–300 mm), which is widely used in machine shops because it balances reach with rigidity. The matt‑chromed scale reduces glare and aids clear reading on the analogue scale, while the robust single‑piece construction lowers the risk of play between beam and slider, so measurements remain reproducible across repeated cycles. Precise vernier reading and practical accuracy The analogue vernier layout provides a readable two‑scale arrangement (top vernier 1/128" and lower vernier 1/20 mm), delivering a practical resolution of 0.05 mm for routine quality control and workshop checks. This level of mechanical precision is suitable for general engineering tasks where DIN‑level repeatability is required; the jaw geometry and vernier spacing are designed to yield quick, verifiable readings without relying on electronics. For jaw lengths up to 200 mm this instrument adheres to DIN 862 conventions, ensuring compatibility with common inspection routines. Versatile jaws and controlled measurement force Equipped with pointed jaws, the caliper is suited to measuring narrow grooves, small bores and stepped features that standard flat jaws struggle to access. The integrated fine‑adjustment screw allows controlled slider movement for precise closing and setting, reducing overshoot and the influence of operator force. Together, these features make the instrument a practical choice for workshop technicians who need fast, accurate checks on components such as fixtures, shafts and assembly interfaces. Designed for handling, storage and longevity Practical details support daily use: the matt finish on the scale preserves legibility, the hardened alloy resists knocks and abrasion, and the instrument is supplied in a protective case to simplify transport and reduce the risk of damage in transit. Careful handling and occasional cleaning with a soft cloth and light oil will preserve the sliding fit and prolong service life. The overall design emphasises a low-maintenance workflow so the caliper can be integrated into routine inspection, setup and assembly procedures with minimal downtime. For robust, workshop‑grade measuring choose the Metav IndustryLine M201.331 workshop caliper and contact Metav Werkzeuge in Emmerich for ordering or application advice: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M201.331 GTIN: 4054469101651 Brand: Metav IndustryLine Category: Messschieber eClass: 21170344 Facts Measuring range: 0–300 mm Resolution (analogue): 0.05 mm Vernier: 1/128" (top) and 1/20 mm (bottom) Jaw length: 90 mm Special features Monoblock design Hardened stainless-steel body Matt‑chromed scale Fine‑adjustment screw Pointed jaws for narrow features Supplied in protective case for transport Conforms to DIN 862 for jaw lengths up to 200 mm FAQ What measurement accuracy can be expected from this caliper? The M201.331 workshop caliper provides an analogue resolution of 0.05 mm using its vernier arrangement; this is suitable for standard workshop and machine‑shop inspections where millimetre/sub‑millimetre precision is required. Can the caliper measure internal and external dimensions as well as steps? Yes; the instrument is designed for external, internal and step measurements thanks to its jaw geometry and pointed tips, making it versatile for common workshop tasks. Is the instrument suitable for regular workshop use on metal components? Yes; the hardened stainless‑steel construction and monoblock design make the caliper robust for routine metalwork checks, fixture setup and maintenance tasks. Does the product come with a case for transport and storage? The caliper is supplied in a protective case to facilitate safe transport and to reduce the risk of damage between uses. Does the caliper meet recognised standards? The M201.331 follows DIN 862 conventions for applicable jaw lengths (the instrument’s 90 mm jaw length falls within the DIN scope), aligning it with common inspection practices. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Workshop Caliper Without Probe Fine Adjustment 0.02mm Resolution Stainless Steel Matt Chrome Scale, Monoblock, Case - Metav IndustryLine
Take advantage of a durable hardened stainless steel beam, precise 0.02 mm vernier reading and a fine‑adjustment thumbwheel for reproducible workshop measurements; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. M201.313 Workshop Caliper — 300 mm hardened stainless steel, 0.02 mm resolution, fine adjustment The M201.313 Workshop Caliper is a 300 mm analogue vernier caliper designed for precise external, internal and step measurements in standard machine‑shop and metalworking tasks. 300 mm hardened stainless steel Fine‑adjustment thumbwheel Vernier reading to 0.02 mm Suitable for external, internal and step measures Precision that improves quality control This analogue vernier instrument delivers a 0.02 mm reading, placing it in the highest precision class for mechanical calipers and making it well suited for demanding workshop checks and dimensional control. The dual vernier concept provides clear graduations for reliable reading, while the solid scale finish reduces glare and reading errors. Combined with a robust measuring jaw geometry, the instrument supports consistent repeatability and helps reduce rework by catching deviations early in the production process. Built for daily workshop demands Constructed from hardened stainless steel with a matt‑chromed scale, the caliper uses a monoblock slide to resist flex and maintain alignment over frequent use. The 300 mm measuring range classifies the tool in the standard size bracket preferred in machine and metalworking environments, offering the best balance of reach and stiffness. A long jaw length of 100 mm improves access to deeper features, while the roughly 0.7 kg mass gives a reassuring feel that aids stable measurement handling during one‑handed operations. Smooth handling that speeds routine checks The integrated fine‑adjustment thumbwheel permits controlled approach and clamping, making repeat measurements quicker and less prone to overshoot. Designed for external, internal and step measurements, the caliper covers the typical four measurement modes used in workshop inspection sequences. Supplied to factory standard, the instrument is ready for regular use in production and maintenance settings; technical queries about fitment or suitability can be clarified with product specialists at Metav Werkzeuge for a seamless integration into existing quality processes. Contact Metav Werkzeuge to discuss how the Metav IndustryLine M201.313 with its 300 mm hardened stainless steel beam and fine‑adjustment thumbwheel can be supplied and specified for the workshop’s quality control requirements Technical Data Article number: M201.313 GTIN: 4054469101323 ECLASS: 21170344 Customs tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Measuring range: 0–300 mm Resolution: 0.02 mm Jaw length: 100 mm Weight: approx. 0.7 kg Type: analogue vernier Special features Material: hardened stainless steel with matt‑chromed scale Fine‑adjustment thumbwheel Monoblock slide design Measurement modes: external, internal, step Factory standard compliance FAQ What accuracy can be expected from this caliper? The M201.313 Workshop Caliper provides a vernier resolution of 0.02 mm, offering a high level of mechanical precision suitable for standard workshop and machine‑shop control tasks. Which measurement types does the instrument support? The caliper is designed for external, internal and step measurements, covering the typical inspection needs encountered in metalworking and assembly. Is the caliper suitable for everyday shop use? Yes. The hardened stainless steel construction and monoblock slide make the M201.313 robust for daily use in production and maintenance environments. Does the instrument include a fine‑adjustment control? Yes. The integrated fine‑adjustment thumbwheel enables controlled approach and secure clamping for repeatable measurements. What standards apply to delivery and documentation? The unit is supplied to factory standard; for specific calibration certificates or extended traceability, please consult Metav Werkzeuge regarding calibration options. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Workshop Caliper Without Probe Fine Adjustment 0.05mm Stainless Steel 90mm Jaws, Monoblock, DIN 862 - Metav IndustryLine
Combine hardened stainless‑steel construction, a 300 mm measuring range and micrometric fine adjustment for dependable workshop measurements; benefit from robust stiffness and clear graduations for routine quality control. Order the caliper directly via Metav Werkzeuge or consult the technical advisors for application guidance. M201.321 Workshop Caliper – 300 mm, Stainless, Fine Adjustment The M201.321 Workshop Caliper is an analogue 300 mm caliper designed for everyday engineering use, combining hardened stainless construction with a matt‑chromed scale and micrometric fine adjustment for repeatable readings. Hardened stainless steel construction 300 mm standard range for workshop use Micrometric fine adjustment for repeatable results Vernier: 1/128" upper, 1/20 mm lower Reliable measurements where they matter The caliper’s hardened stainless steel frame and monoblock design deliver high torsional stiffness, which reduces flexing during clamping and improves repeatability across many measurements. Compliance with DIN 862 for typical jaw lengths ensures that results can be referenced against common workshop standards; this translates into fewer rechecks, faster throughput and a measurable reduction in scrap from mis‑measured parts. The matt‑chromed scale reduces glare, making readings quicker under workshop lighting. Practical precision for daily quality control An analogue vernier scale with a readable graduation of 0.05 mm gives the instrument the industrial‑standard accuracy expected in machine shops. The dual vernier arrangement (1/128" upper, 1/20 mm lower) supports both metric and inch interpretation, while the integrated fine adjustment spindle lets operators make slow, controlled closure of the jaws for repeatable contact pressure. These features together simplify setting‑up and make the tool efficient for batch inspections and setup checks. Built for workshop endurance and usability Classified in the standard range (maximum measuring span 100–300 mm), this caliper strikes a balance between reach and handling: long enough for common components yet stiff enough for one‑handed operation. The matt‑chrome finish and hardened surfaces resist wear from regular use in industrial environments, reducing maintenance intervals and preserving scale legibility. The vernier mechanism and fine feed are straightforward to use, supporting quick handovers between operators without an extended learning curve. For practical advice on integrating the M201.321 into a shop workflow or to request application recommendations from Metav Werkzeuge, contact our specialists who will advise on measurement routines and compatibility with existing inspection processes. Technical Data Article number: M201.321 GTIN: 4054469101422 ECLASS: 21170344 Material: hardened stainless steel with matt‑chromed scale Type: analogue vernier caliper Monoblock construction Fine adjustment included Facts Measuring range: 0–300 mm Jaw length: 90 mm Graduation / resolution: 0.05 mm Vernier: 1/128" (upper) and 1/20 mm (lower) Norms: DIN 862 (jaw length up to 200 mm), factory standard above 250 mm Special features Hardened measuring surfaces Matt‑chromed scale for reduced glare Robust monoblock frame for stiffness Micrometric fine adjustment for precise contact Designed for standard workshop measurement tasks FAQ Is this caliper suitable for everyday workshop tasks? The M201.321 workshop caliper is designed for routine machine‑shop and metalworking measurements within the standard 0–300 mm range, offering robust construction and a readable vernier for reliable daily use. What resolution and reading accuracy can be expected? With a graduation of 0.05 mm and a vernier arrangement of 1/128" (upper) and 1/20 mm (lower), the instrument provides the industrial‑standard mechanical resolution commonly used for workshop quality control. Does the caliper meet recognised standards? The M201.321 is specified to conform to DIN 862 for typical jaw lengths, ensuring compatibility with common metrology practice in production environments. How does the fine adjustment help in measurement tasks? The integrated fine adjustment allows slow, controlled movement of the jaw, reducing operator‑induced variation and improving repeatability when setting measurement contacts. Which materials and environments is this caliper intended for? Constructed from hardened stainless steel with a matt‑chromed scale, the caliper is built to withstand typical workshop conditions and regular handling while keeping the scale legible. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3500mm Digital Precision Caliper Colour 2.4" Touchscreen Wireless/USB ISO 17025 Calibration, Aluminium Body - Microtech Metrology
Take advantage of the combination of an extra‑long 3,500 mm measuring range, a 2.4" colour touchscreen with Wireless + USB data transfer and full ISO 17025 calibration with certificate for dependable large‑format measurement. Order the Precision Caliper directly via Metav Werkzeuge or ask our consultants for application advice. Precision Caliper — Microtech Metrology (extra‑long, digital with touchscreen) The Precision Caliper is a digital, extra‑long measuring instrument designed for reproducible measurements of large components in heavy machining, fixture and vessel manufacture. Extra‑long 3,500 mm measuring range Colour 2.4" touchscreen display Wireless + USB data interface Supplied with ISO 17025 calibration certificate Measure large components with repeatable stiffness and reach The caliper’s 3,500 mm measuring range classifies it in the extra‑long category, suited for large flanges, housings and pipe sections where single‑piece measurement is required. Constructed from aluminium, the beam balances low weight with adequate profile stiffness to keep deflection manageable over long spans; the extended jaw length 1,000 mm improves contact options for deep or irregular geometries. This design reduces handling time compared with multiple short measurements and helps maintain reproducibility on heavy workpieces. Traceable accuracy and calibrated readiness for inspection Delivered fully calibrated to ISO 17025 with a calibration certificate, this instrument supports documented quality processes and audit trails. The stated accuracy of ±0.24 mm and the specified measuring force 1–20 N set clear expectations for tolerance planning on large assemblies. Because the tool arrives with an accredited certificate, metrology departments and quality managers can integrate it into inspection routines immediately without additional calibration steps. Faster inspections through digital readout and data transfer The 2.4" colour touchscreen provides clear numeric and function feedback, while the Wireless + USB data output enables direct logging to measurement software or production databases. This digital workflow minimises transcription errors and accelerates SPC or first‑article reporting. Intuitive controls reduce training time for operators and the digital interface helps connect the instrument with traceability systems in modern workshops and Industry 4.0 environments. Built for workshop use and long‑term reliability Aluminium construction and robust carriage components ensure the caliper tolerates regular handling in heavy‑duty environments. The extra‑long format is specifically intended for large‑scale fabrication tasks where fewer setups and fewer handoffs reduce cumulative measurement uncertainty. Supplied as a calibrated measuring instrument, it supports both production control and incoming inspection with documented credibility from delivery. For measurement tasks that demand long reach and documented precision, choose Microtech Metrology’s extra‑long solution and contact Metav Werkzeuge in Emmerich for tailored supply and application support: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 142135102 GTIN: 4061905037207 Manufacturer: Microtech Metrology Material: Aluminium Display: Colour 2.4" touchscreen Data output: Wireless + USB Facts Measuring range: 0–3,500 mm Accuracy: ±0.24 mm Measuring force: 1–20 N Jaw length: 1,000 mm Digital: yes Special features ISO 17025 calibration and certificate included Extra‑long format for large components Wireless data transmission and USB connection Colour touchscreen for intuitive operation Suitable for workshop and inspection use FAQ Is this caliper suitable for measuring large housings and flanges? Yes. The Precision Caliper from Microtech Metrology, SKU 142135102, is designed for large housings and flanges with its 3,500 mm measuring range and extended jaws. Does the instrument arrive calibrated for immediate use in inspection? Yes. The tool is delivered fully calibrated to ISO 17025 and includes a calibration certificate for immediate integration into quality processes. How is measurement data captured and exported? Measurement values can be exported via the built‑in Wireless interface or through the USB port for direct logging into inspection software. What level of handling force is appropriate for reliable readings? The caliper specifies a measuring force range of 1–20 N; maintaining consistent force within this range helps achieve the stated accuracy of ±0.24 mm. Is the device suitable for everyday workshop conditions? The aluminium construction and robust carriage design make the instrument appropriate for regular workshop use, particularly where long‑span measurements are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
3500mm Digital Precision Caliper Colour 2.4" Touchscreen, Wireless USB, ISO 17025 Calibrated - Microtech Metrology
Taking advantage of an extra‑long 0–3500 mm measuring range, integrated Wireless+USB data output and full ISO 17025 calibration, this instrument delivers reproducible, traceable measurements for large components; order directly through Metav Werkzeuge or consult our advisors for specification matching. Digital Caliper 0–3500 mm by Microtech Metrology — extra‑long range with 2.4″ colour touchscreen and Wireless+USB The Digital Caliper is an extra‑long measuring instrument designed for large assemblies and workshop metrology, combining a broad 0–3500 mm range with a compact aluminium profile for manageable handling and precise data capture. Extra‑long 0–3500 mm measuring range 2.4″ colour touchscreen display Wireless+USB data output for SPC Delivered calibrated to ISO 17025 Measure large structures with repeatable precision The extra‑long measuring capability of 0–3500 mm addresses applications in heavy machining, large‑format assemblies and pipe or vessel work where standard calipers fall short. An aluminium beam keeps the instrument lightweight relative to its span, reducing operator fatigue and helping preserve alignment during extended measurements. The long jaw length 600 mm provides practical reach into recesses and across broad faces, while the construction focuses on profile stiffness to maintain reproducibility over the full travel. For production environments this means fewer transfers to other gauges and faster inspection cycles without sacrificing consistency. Capture reliable digital readings and integrate seamlessly Equipped with a 2.4″ colour touchscreen and Wireless+USB outputs, the caliper simplifies manual reading and direct machine‑data transfer for statistical process control. The display shows clear numeric values and simple menus for zeroing and unit selection, while the digital interface enables direct logging into measurement software or spreadsheets. Resolution is 0.01 mm, which supports typical workshop tolerances, and the stated nominal accuracy of 0.16 mm should be considered when planning inspection strategies; resolution and accuracy are distinct—resolution defines the smallest display step, accuracy denotes the expected deviation. Full traceability is ensured by delivery with an ISO 17025 calibration certificate, making the readings suitable for formal quality documentation. Designed for workshop efficiency and reliable procurement Beyond individual measurements, the instrument is built to reduce cycle time and documentation overhead. Wireless transmission removes repetitive manual entry, lowering transcription errors and speeding reporting; USB provides a dependable wired option where wireless is restricted. The robust touchscreen and corrosion‑resistant aluminium finish support everyday shopfloor use, while the extended span reduces the need for multiple instruments. For buyers seeking validated measurement solutions, the combination of long range, digital interfacing and accredited calibration creates a pragmatic balance between reach, data quality and operational efficiency — a clear fit for toolrooms, fixture builders and large‑component inspectors. Contact Metav Werkzeuge today to discuss how this ISO 17025‑calibrated extra‑long digital caliper with Wireless+USB can be integrated into production measurement routines and to arrange delivery from Emmerich. Technical data SKU: 142135162 GTIN: 4061905455704 Manufacturer: Microtech Metrology Core specifications Measurement range: 0–3500 mm Resolution (reading): 0.01 mm Accuracy (nominal): 0.16 mm Jaw length: 600 mm Special features Aluminium construction Colour 2.4″ touchscreen display Wireless+USB data output Delivered calibrated to ISO 17025 with certificate FAQ What measurement range does this caliper cover? The digital caliper from Microtech Metrology covers a measuring range of 0–3500 mm, making it suitable for extra‑long components and assemblies. Is the instrument supplied with official calibration? Yes — the instrument is delivered fully calibrated to ISO 17025 and includes a calibration certificate for quality documentation. How are readings exported for SPC? Data can be exported via Wireless+USB; the caliper supports direct transfer to inspection software or spreadsheets for statistical process control. What resolution and accuracy can be expected? The display resolution is 0.01 mm; the nominal accuracy is specified as 0.16 mm; users should plan tolerances accordingly for final verification steps. Which material is the caliper made from and why does that matter? The beam and frame are aluminium, which reduces weight over the long span while maintaining sufficient stiffness for repeatable measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
3500mm Digital Precision Caliper Colour 2.4" Touchscreen, Wireless USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the extra‑long measuring range, integrated wireless and USB data transfer, and factory calibration for a consistent, auditable measuring workflow; order via Metav Werkzeuge or consult Metav's specialists for integration support. Digital Caliper — extra‑long 3,500 mm range with 2.4″ colour touchscreen (Microtech Metrology) The Digital Caliper is an extra‑long measuring instrument for large‑format component inspection, designed for workshop and production environments Extra‑long 3,500 mm measuring range 2.4″ colour touchscreen display Wireless and USB data output Supplied fully calibrated to ISO 17025 Reliable measurement for large components Designed for shop floors and measurement benches, the 3,500 mm extra‑long caliper delivers the reach required for shafts, pipes and large housings while keeping handling practical. The lightweight aluminium beam reduces transport weight and, combined with a 400 mm jaw length, preserves stiffness along the measuring length to maintain repeatable readings. This scale length is classified as an extra‑long caliper and is particularly suitable where single‑piece control of long components avoids stitch‑measuring and assembly errors. Fast data capture and clear readout Measurements appear on a 2.4″ colour touchscreen with a resolution of 0.01 mm, improving legibility and reducing interpretation errors compared with analogue readouts. The unit offers both Wireless and USB data outputs so measured values can be logged directly to inspection software or spreadsheets, cutting paperwork and the risk of transcription mistakes. Integrated digital output streamlines quality checks and supports traceable data collection for process control. Traceable calibration and workshop readiness The instrument is supplied fully calibrated to ISO 17025 and includes a calibration certificate, providing documented traceability for audits and incoming inspection. Stated repeatability and systematic deviation are within ±0.12 mm, a tolerance level suited to large‑format dimensional checks and machining set‑up tasks. Robust electronics and construction minimise operator influence and help maintain consistent measurement conditions across shifts. For assistance selecting the right Microtech Metrology caliper for large‑format inspection or to arrange purchase and delivery via Metav Werkzeuge, contact Metav Werkzeuge GmbH at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: 142135142 GTIN: 4061905455698 Manufacturer: Microtech Metrology Digital display: Colour 2.4" touchscreen Facts Measuring range: 0–3,500 mm Resolution: 0.01 mm Accuracy / repeatability: ±0.12 mm Jaw length: 400 mm Special features Material: Aluminium Data output: Wireless + USB Delivered calibrated to ISO 17025 Extra‑long digital caliper for large components FAQ What maximum length can be measured with this caliper? The caliper measures up to 3,500 mm in a single pass; the extra‑long range is intended for large shafts, pipes and housings and is supplied under SKU 142135142. Is the instrument delivered ready for traceable inspection work? Yes — the device is supplied fully calibrated to ISO 17025 and includes a calibration certificate for audit and quality‑assurance purposes. How are measurement values transferred to a PC or SPC system? Values can be exported by Wireless or USB connection; the touchscreen display and digital outputs support direct logging into inspection software and spreadsheets. What resolution and accuracy does the device provide? The display resolution is 0.01 mm and the stated repeatability/systematic deviation is ±0.12 mm, a specification suitable for large‑format workshop checks. Which materials suit this caliper's application range? The aluminium beam and extra‑long design are optimised for measurements on large metallic components, assemblies and pipework where single‑pass length coverage reduces handling and alignment errors. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
4000mm Workshop Digital Caliper 300mm Long Jaw, Colour 2.4" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Combine the 4,000 mm measuring range, ISO 17025 traceable calibration and Wireless + USB data output to secure repeatable, long‑span measurements; order the workshop caliper directly via Metav Werkzeuge or ask our consultants if needed. Workshop caliper — extra‑long digital caliper, 4,000 mm range (Microtech Metrology) The Workshop caliper is an extra‑long digital measuring instrument designed for large components and robust workshop metrology, offering a colour touchscreen and both wireless and USB data transfer for seamless documentation. Extra‑long 4,000 mm measuring range ISO 17025 calibration with certificate Wireless and USB data output Colour 2.4" touchscreen display Precision across large dimensions For measurement tasks that extend well beyond conventional bench work, the 4,000 mm measuring range and extra‑long design deliver clear practical benefits: extended reach without repeated setups and reduced fixturing time. The instrument’s construction balances stiffness and weight to keep deflection minimal over long spans, while the hand‑finished jaws and integrated fine adjustment enable controlled, repeatable contact. Those factors combine to reduce measurement scatter and improve process reliability when inspecting housings, large shafts or welded assemblies. Traceable results and seamless data capture Reliable documentation is essential for production control. The caliper comes with ISO 17025 traceable calibration and a certificate, ensuring that results meet audit and quality‑management demands. Digital output via Wireless and USB supports direct data collection to measuring software or SPC systems, eliminating manual transcription errors and speeding up reporting cycles. The on‑board Colour 2.4" touchscreen presents readings clearly and simplifies configuration for batch tasks, so instrument integration into standard workflows is straightforward. Repeatable contact and ergonomic handling Controlled measuring force is crucial for comparability across operators. With a measurement force range of 1–20 N and tactile fine‑adjustment, the instrument reduces operator‑induced variation and makes one‑person handling viable even on large parts. The ergonomics of the long jaw and the instrument’s user interface are designed for routine workshop use: quick clamping, gentle approach and a robust frame for daily handling. The result is faster inspection cycles with consistent outcomes. Built for the workshop — durability and serviceability Materials and finishing focus on a long service life under industrial conditions. The device includes hand‑finished measuring faces to reduce wear and maintain contact geometry, while the robust electronics and sealed interfaces protect the core measuring system. Fine‑tuning and maintenance are simplified by accessible adjustment features, and the wireless/USB outputs future‑proof data exchange. Supplied and supported via Metav Werkzeuge, the product is positioned for reliable supply and practical post‑sales support. For traceable, long‑span metrology with integrated data transfer and ISO 17025 calibration, contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply. Technical data SKU: 141040256 GTIN: 4061905038839 Manufacturer: Microtech Metrology Facts Measuring range: 0–4,000 mm Resolution/reading: 0.01 mm Measuring force: 1–20 N Jaw length: 300 mm Display: Colour 2.4" touchscreen Special features Digital output: Wireless and USB Fine adjustment included Hand‑finished measuring jaws Delivered calibrated to ISO 17025 with certificate Extra‑long design for large components Suitable for robust workshop use FAQ Is the instrument delivered calibrated? Yes. The Workshop caliper (Microtech Metrology, SKU 141040256) is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceable documentation. What accuracy can be expected over the full measuring range? The instrument combines stable mechanics and controlled measuring force to ensure repeatable results across the 4,000 mm span; refer to the ISO 17025 certificate for specific uncertainty figures for the supplied unit. How is measurement data transferred to a PC or inspection system? Data transfer is provided via Wireless and USB outputs; the caliper’s digital interface and colour touchscreen simplify direct export to data‑collection or SPC software. Which workshop tasks suit this caliper best? The caliper is intended for large components such as housings, shafts and welded assemblies where extended reach and traceable measurements are required; its extra‑long design reduces repositioning and fixturing time. Does the caliper support fine control during measurement? Yes. The instrument features a fine‑adjustment mechanism and a controlled measuring force range (1–20 N) to reduce operator‑related variation and improve repeatability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
400mm Precision Caliper Monoblock Fine Adjustment Stainless Steel Matt Chrome Scale, DIN 862, Supplied in Case - Metav IndustryLine
Take advantage of the combination of monoblock hardened stainless steel, a 0–400 mm measuring range and a fine-adjustment thumb screw for repeatable, workshop-grade results; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Workshop Caliper M201.324 — Monoblock stainless caliper, 0–400 mm range, fine-adjustment (Metav IndustryLine) The Workshop Caliper M201.324 is an analogue slide caliper designed for medium-range workshop measurement tasks, combining a rigid single-piece frame with a precise Vernier scale for repeatable dimensional control. 0–400 mm measuring range for medium components Monoblock hardened stainless steel construction Fine-adjustment thumb screw for precise setting Vernier scales: 1/20 mm (0.05 mm) and 1/128" reading Robust construction for repeatable workshop measurement A rigid monoblock frame and hardened stainless steel material give this slide caliper durability and rigidity where it matters: across the full 0–400 mm range. Classified as a medium-range instrument (300–500 mm category), it balances reach and stiffness, reducing deflection during routine checks on larger fixtures, housings and assembly components. The matt-chrome graduated scale resists glare and wear, so legibility and long-term traceability of marks are preserved in daily use. Mechanical Vernier accuracy with fine, controllable positioning The analogue Vernier arrangement combines a metric nonius of 1/20 mm (equivalent to 0.05 mm resolution) with an inch scale reading via 1/128", enabling cross-referenced measurements without electronics. Conformity to DIN 862 is specified up to the shorter jaw lengths; above 250 mm the instrument is supplied according to the manufacturer's workshop standard, which maintains practical tolerance for heavy-duty use. The integrated fine-adjustment thumb screw simplifies precise jaw alignment, so single-handed, repeatable readings are faster and less error-prone. Engineered for everyday workshop workflows Surfaces are finished for resilience: the measuring faces are hardened to preserve accuracy under frequent contact, while the matt-chrome scale reduces reflections in bright workshop lighting. The 100 mm jaw length provides a good balance between bite depth and access for stepped measurements or profiles. As a sturdy analogue gauge, this caliper is low-maintenance and readily serviceable, making it a pragmatic choice for production inspection, toolroom checks or quality control stations. Backed by Metav’s quality filter, the instrument meets the expectations of industrial users seeking dependable workshop tools. For application guidance, stock checks or to source the Metav IndustryLine Workshop Caliper M201.324 for your workshop, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and availability. Technical Data Article number: M201.324 GTIN: 4054469101453 Manufacturer: Metav IndustryLine Facts Measuring range: 0–400 mm Jaw length: 100 mm Vernier / nonius: 1/20 mm (0.05 mm) Vernier (inch): 1/128" Special features Material: hardened stainless steel with matt-chrome scale Construction: monoblock design Fine-adjustment thumb screw Conforms to DIN 862 up to designated jaw lengths; above 250 mm supplied to factory standard FAQ What measuring range does this caliper cover? The Workshop Caliper M201.324 covers a measuring range of 0–400 mm, placing it in the medium-range category suitable for larger workshop assemblies. What resolution and reading method does the instrument offer? Readings are mechanical via a Vernier: the metric nonius provides 0.05 mm resolution (1/20 mm) and an inch scale is available via a 1/128" vernier. Is the caliper corrosion-resistant and robust for shop use? Yes; the caliper is manufactured from hardened stainless steel with a matt-chrome graduated scale to improve durability and reduce surface glare during repeated use. Does the instrument comply with recognised standards? The caliper is specified against DIN 862 for applicable jaw lengths; for sizes above the stated limit it is supplied according to the manufacturer's workshop standard, ensuring practical suitability for heavy-duty tasks. What feature assists with precise jaw alignment? A fine-adjustment thumb screw is integrated to allow controlled, repeatable jaw positioning for accurate single-handed measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Workshop Caliper With 150mm Depth Probe, 0.05mm Resolution, Fine Adjustment, Monoblock, Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of monoblock stability, fine adjustment and a clear analogue scale for reliable workshop measurement; order directly via Metav Werkzeuge or consult our specialists for specification advice. Workshop Caliper M201.334.2 – 400 mm analogue caliper with fine adjustment (Metav IndustryLine) The Workshop Caliper M201.334.2 is an analogue, monoblock stainless-steel caliper designed for medium-range workshop measurement tasks, offering precise external, internal and step measurement with fine adjustment. Monoblock stainless-steel construction Fine-adjustment for precise positioning 400 mm measuring range with 150 mm jaws Matt-chromed scale for clear reading Built for repeatable shop-floor accuracy The caliper is engineered as a monoblock instrument from hardened stainless steel, giving a stable measuring beam that resists torsion and wear in daily workshop use. The analogue nonius provides a reading step of 0.05 mm, matching common industrial tolerance bands for mechanical workshops; this makes the tool suitable for general quality control and setup tasks where rapid, robust checks are required. The integrated fine adjustment mechanism enables controlled closing of the jaws for reproducible contact, reducing reading scatter when comparing multiple components. Medium-range reach without compromising stiffness Classified as medium range (measuring range up to 300–500 mm), this caliper balances reach and rigidity: the 400 mm span covers larger fixtures and housings while the 150 mm jaws retain sufficient profile stiffness for accurate measurements across the full range. This combination is particularly useful for jigs, mould components and medium-sized castings where single-handed guidance and reliable repeatability are valued. The construction reduces elastic deflection and supports consistent measurement procedures across workshop batches. Clear analogue operation and durable scale Reading is supported by a clear matt-chromed scale and a dual nonius: 1/128" on the top and 1/20 mm on the bottom, the latter corresponding to the 0.05 mm division. The simple, mechanical operation requires no batteries and is straightforward to integrate into existing inspection routines; training time is minimal for staff familiar with conventional calipers. The instrument complies with DIN 862 requirements for the applicable jaw length, underlining its suitability for standardised workshop measurement protocols. For a technical consultation on the Metav IndustryLine caliper and to confirm fit for specific measuring tasks, contact Metav Werkzeuge for personalised advice and procurement support. Technical data Article number: M201.334.2 GTIN: 4054469101712 ECLASS: 21170344 Tariff number: 90173000 Numbers / Core technical data Measuring range: 0–400 mm Jaw length: 150 mm Resolution (nonius): 0.05 mm Analogue nonius: 1/128" (top) and 1/20 mm (bottom) Conformity reference: DIN 862 (jaw length ≤ 200 mm) Designs / Special features Monoblock construction Hardened stainless steel with matt-chromed scale Fine-adjustment mechanism Pointed jaws for extended access Analogue operation, no power required FAQ How precise is the measurement on this caliper? The caliper delivers a reading step of 0.05 mm via its analogue nonius; this aligns with the industrial standard for mechanical workshop calipers and supports routine quality checks. Can the caliper be used for internal and step measurements? Yes, the instrument is designed for external, internal and step measuring tasks and the pointed jaws assist access to narrow or recessed features. Is the instrument compliant with recognised norms? The caliper meets the DIN 862 requirements applicable to its jaw length and workshop use, providing a familiar reference for inspection and documentation. What advantages does the monoblock design provide? Monoblock construction increases rigidity and reduces deformation under load, improving repeatability when measuring larger components across the 400 mm span. Does the caliper require batteries or electronics? No; this is an analogue caliper with mechanical nonius reading and a fine-adjustment screw, designed for maintenance-light workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Workshop Caliper With Pointed Jaws 0.05mm Resolution Fine Adjustment Monoblock In Stainless Steel, Delivered In Case - Metav IndustryLine
Combining a hardened stainless-steel frame, a 0–400 mm measuring range and a precise fine-adjustment control, this workshop caliper delivers steady, repeatable results on medium-sized components. Order the device directly via Metav Werkzeuge or contact our advisers for application-specific guidance. M201.334.3 Workshop caliper — 0–400 mm, hardened stainless steel, analogue with fine adjustment The M201.334.3 is a robust workshop caliper intended for reliable external, internal and step measurements on medium-format components, featuring pointed jaws and a monoblock construction for enhanced stability. Hardened stainless-steel frame 0–400 mm measuring range Fine-adjustment thumbwheel Monoblock construction for rigidity Pointed jaws for narrow features Consistent rigidity for repeatable results The monoblock construction and hardened stainless-steel beam reduce flex and thermal distortion, ensuring that measurements stay consistent over repeated cycles. With a 200 mm jaw length and a measuring span of 0–400 mm, the instrument falls into the medium class for calipers — a practical compromise between reach and stiffness for machine‑shop and fixture work. Compliance with DIN 862 is maintained for the jaw geometry at the specified jaw length, supporting standardised measurement practice on common workshop parts. Precise control and clear analogue readout Equipped with a dual nonius — 1/128" on the upper scale and 1/20 mm on the lower scale — the caliper offers traditional analogue reading suitable for metric and imperial workflows. The fine-adjustment thumbwheel enables cautious approach and micro‑positioning of the jaws, reducing overshoot when handling delicate features. For many industrial applications the metric nonius (1/20 mm → 0.05 mm) provides the expected mechanical resolution for everyday quality control while remaining robust under workshop conditions. Designed for workshop versatility and serviceability Pointed measuring jaws provide access to narrow grooves and small bore edges that standard tips cannot reach, widening the instrument’s practical use on assemblies and small components. The matt‑chromed scale improves legibility by reducing glare, while the stainless construction is hardened for wear resistance and longevity in a working environment. The caliper's functional layout supports quick, confident measurement tasks without the need for electronic systems, making it a durable choice for production floors and maintenance benches. Secure the M201.334.3 from Metav Werkzeuge for dependable medium-range measuring capability; contact Metav Werkzeuge for advice on integration into existing inspection workflows. Technical data Article number: M201.334.3 GTIN: 4054469101729 Brand: Metav IndustryLine Facts Measuring range: 0–400 mm Jaw length: 200 mm Graduation: 1/20 mm (0.05 mm) and 1/128" Construction: Monoblock Special features Material: hardened stainless steel, matt‑chromed scale Fine adjustment: yes Analogue nonius: dual scale Pointed jaws included Standard: DIN 862 (applicable at jaw length 200 mm) FAQ What measuring tasks is this caliper best suited to? The M201.334.3 workshop caliper is optimised for medium‑range tasks where a balance of reach and stiffness is required, such as measuring housings, fixtures and mid‑sized machined parts. How precise is the analogue graduation on the caliper? The caliper uses a metric nonius at 1/20 mm (equivalent to 0.05 mm) together with a 1/128" imperial scale, providing the mechanical resolution typical for workshop analogue instruments. Does the caliper meet recognised standards? Yes, the jaw geometry for the stated jaw length conforms to DIN 862, ensuring standardised form and dimensional properties for routine inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision measurement for heavy components with workshop calipers
Workshop calipers, also described as heavy-duty calipers or industrial vernier calipers, are engineered for exact external and internal measurement on large workpieces. Designed for shipbuilding, rail vehicle manufacture and heavy plant assembly, these calipers deliver stable, repeatable readings even across extreme spans up to 10,000 mm (10 metres).
How these calipers perform in industrial practice
Built with an extremely distortion-free frame of hardened or weight-optimised special steel, workshop calipers maintain alignment across long reaches and heavy contact forces. They measure shafts, flanges and housings by combining robust jaws with optional measuring-force-limiting systems, fine micrometric slider adjustment and rounded internal measuring faces to reduce damage and measurement error. Available in analogue form with a fine vernier scale or as a digital variant with data output for direct integration into quality assurance systems.
Practical advantages that improve production
- Proven metrological stability for large components thanks to distortion-free construction.
- Hands-on ergonomics through measuring-force-limiting and precision fine adjustment, reducing operator error.
- Flexible data handling with digital data output for seamless quality documentation.
- Materials and design that withstand heavy workshop environments: hardened special steel or weight-optimised alternatives.
- Measurement range scalability up to 10,000 mm (10 metres) for XXL applications.
Why Metav is the sensible partner for these tools
Metav stands for the democratisation of precision and acts as a quality filter for the European market from its base in Emmerich. With over 48,000 customers and a portfolio exceeding 250,000 products, Metav combines long-standing expertise with a comprehensive range that simplifies procurement for industry and trade. In the field of workshop calipers, Metav’s assortment is positioned as the optimal choice, offering both analogue vernier solutions and modern digital models suitable for integration into industrial measurement workflows.
Core takeaway
For reliable dimensional control of oversized components, workshop calipers deliver measurable gains in repeatability, ergonomics and process integration—making them indispensable in heavy industry.
FAQ
What measuring ranges are available for workshop calipers?
Workshop calipers are offered for extreme tasks, with models covering spans up to 10,000 mm (10 metres) to accommodate large shafts, flanges and housings.
Can these calipers connect to quality assurance systems?
Yes. Many industrial vernier calipers are available with digital data output, enabling direct transfer of measurement values into QA systems for traceable documentation.
Which design features reduce operator-induced error?
Features such as a measuring-force-limiting system, a precise fine-adjustment mechanism and rounded internal measuring faces reduce variability and the risk of damaging components during measurement.
What materials ensure long-term stability for large-scale measurement?
Metav’s workshop calipers use hardened special steel or weight-optimised variants to ensure minimal distortion and lasting dimensional stability even under heavy use.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com