Heavy-duty workshop verniers for large components
Our heavy-duty workshop verniers provide precise external and internal measurement of massive workpieces such as large shafts, flanges and housings, delivering stability and repeatable results even across spans up to 10,000 mm. Designed for the demands of heavy industry, shipbuilding and rail vehicle manufacture, they combine a distortion‑resistant construction in hardened or weight‑optimised special steel with ergonomic features like force‑limited measuring systems and fine adjustment for exact slide movement. Available in analogue versions with fine vernier scales or digital variants with data outputs for quality assurance integration, these calipers ensure reliable dimensional control in XXL machining.
600mm Workshop Caliper Without Tip 0.05mm Resolution Fine Adjustment Monoblock, Hardened Stainless Steel 150mm Jaws - Metav IndustryLine
Benefit from a robust hardened stainless-steel monoblock design and the 600 mm measuring range with fine adjustment for repeatable workshop measurement results; order the caliper directly via Metav Werkzeuge or consult our advisors for specification support. M201.326 Workshop Vernier Caliper 0–600 mm — Metav IndustryLine, stainless steel, fine adjustment The M201.326 is a workshop vernier caliper designed for long-range dimensional checks in machine shops and fabrication environments, combining a rugged monoblock frame with a fine‑adjustment spindle for controlled positioning. 600 mm measuring range for large components Hardened stainless-steel monoblock construction Fine-adjustment spindle for precise positioning Dual vernier: 1/128" top and 1/20 mm bottom Long reach with workshop-grade stiffness This long-bar instrument offers a 600 mm measuring range that places it in the category for large-format workshop calipers, suitable where extended reach and stable guidance are required. The extended reach is paired with a jaw length 150 mm, which improves clamping contact on deeper workpieces and helps maintain alignment during measurement. Because the scale length is substantial, the design prioritises profile rigidity so measurements remain reproducible across the full span — an important consideration for fixtures, large assemblies and machine components that require consistent checks. Built to resist everyday workshop wear The measuring frame is made from hardened stainless steel with a matt-chrome scale, providing corrosion resistance and long service life under regular use. The monoblock construction reduces flex and wear at the sliding junction, while a precision-machined finish preserves the vernier alignment over time. A fine-adjustment spindle is integrated for small, controlled movements of the jaw, enabling exact seating before reading; this reduces operator-induced variation and speeds up routine inspection. The overall build quality supports frequent use in demanding industrial settings. Clear analogue reading and practical standard compliance The analogue vernier layout provides a clear dual-scale reading — 1/128" on the top and 1/20 mm on the bottom — delivering an effective resolution of 0.05 mm, which aligns with common workshop tolerances. The caliper is supplied to factory standard for sizes above 250 mm (norm reference: DIN 862 up to 200 mm), ensuring the instrument meets established mechanical requirements for vernier instruments while reflecting manufacturing adaptations for larger gauges. The simple, mechanical operation requires no batteries and is straightforward to integrate into existing QA routines where robust, repeatable checks are needed. For dependable long-range measurement with Metav IndustryLine quality, contact Metav Werkzeuge in Emmerich for supply or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M201.326 GTIN: 4054469101521 Manufacturer: Metav IndustryLine Facts Measuring range: 0–600 mm Resolution: 0.05 mm Jaw length: 150 mm Weight: 3.1 kg Scale finish: matt-chrome Nonius/vernier: 1/128" (top); 1/20 mm (bottom) Norm: DIN 862 up to 200 mm; factory standard above 250 mm Special features Monoblock frame Fine-adjustment spindle Hardened stainless-steel construction Analogue vernier caliper for workshop use Designed for large-component measurement FAQ What measurement range does this caliper cover? The M201.326 workshop vernier caliper covers a measuring range of 0–600 mm, suitable for large components and extended checks. What level of resolution and repeatability is provided? With a vernier arrangement that yields a resolution of 0.05 mm, the M201.326 offers workshop-grade repeatability appropriate for standard machine‑shop inspections. Which materials and finishes are used on the caliper? The M201.326 is made from hardened stainless steel with a matt-chrome scale, combining corrosion resistance with durable surface legibility. Is the caliper compliant with recognised standards? The instrument follows DIN 862 for sizes up to 200 mm; for this 600 mm version, the caliper is produced to the manufacturer's standard to ensure suitability for extended lengths. Does the caliper include a fine-adjustment mechanism? Yes, the M201.326 incorporates a fine-adjustment spindle to enable controlled jaw movement and more reliable seating before reading. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Precision Caliper Monoblock Fine Adjustment Stainless Steel Matt Chrome Scale, Nonius 1/128" / 1/20mm, DIN 862 - Metav IndustryLine
Take advantage of a robust 600 mm measuring range combined with hardened stainless-steel construction and a fine-adjustment slide for repeatable workshop measurements. Order the device directly via Metav Werkzeuge or ask the technical consultants for application advice. M201.326.2 Workshop caliper — 600 mm, hardened stainless steel with fine adjustment (Metav IndustryLine) The M201.326.2 is a heavy‑duty 600 mm workshop caliper engineered for long‑range component measurement, featuring a monoblock frame and a matt‑chromed scale for clear readings. Hardened stainless‑steel construction 600 mm measuring range Fine adjustment for precise setting Monoblock frame for increased stiffness Robust construction that keeps measurements stable The caliper is built from hardened stainless steel with a matt‑chromed scale, delivering resistance to corrosion and reliable legibility in workshop conditions. The monoblock design reduces flex along the beam, which improves reproducibility when measuring larger parts; this is especially relevant where repeated checks are carried out on fixtures or assemblies. The integrated fine adjustment allows controlled jaw movement for exact positioning, so measurements can be set smoothly without sudden jumps, reducing setup time and scrap rates. Vernier precision and clear standards for traceable results Equipped with a dual vernier — imperial at the top and metric at the bottom — the instrument provides practical, workshop‑grade resolution. The metric vernier corresponds to a 0.05 mm division, which aligns with the common industrial mechanical standard for calipers and supports routine quality control tasks. Compliance follows DIN 862 for jaw lengths up to 200 mm; larger jaw configurations are produced to the factory standard to ensure structural integrity over the full 600 mm range. This combination of vernier readability and normative alignment makes the caliper suitable for repeatable dimensional checks without reliance on electronics. Designed for heavy workshop use and straightforward handling Longer measuring ranges introduce challenges such as bar deflection and handling ergonomics; the M201.326.2 addresses these with a rigid beam profile and a fine‑movement thumbwheel that facilitates single‑handed, precise adjustments. The matt‑chromed scale reduces glare under strong workshop lighting while the robust jaws cope with everyday contact wear. As a long‑bar workshop caliper in the 500–1,000 mm class, it is tailored to measure larger castings, housings and fixtures where stiffness and repeatability matter more than compactness. For robust long‑range measurements rely on the Metav IndustryLine M201.326.2 — contact Metav Werkzeuge in Emmerich for detailed application guidance or to arrange supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M201.326.2 GTIN: 4054469101545 Manufacturer: Metav IndustryLine eClass: 21170344 Norm: DIN 862 (jaw length ≤ 200 mm), factory standard from 250 mm Facts Measuring range: 0–600 mm Maximum measuring length: 600 mm Jaw length: 300 mm Resolution (vernier): 0.05 mm Scale system: Metric vernier (1/20 mm) and imperial vernier (1/128") Special features Material: hardened stainless steel, matt‑chromed scale Monoblock frame construction Fine adjustment (feineinstellung) for controlled jaw travel Analog vernier operation (mechanical) Designed for long‑bar workshop measurements (500–1,000 mm class) Without measuring tip (workshop style jaws) FAQ What accuracy can be expected from this long‑range workshop caliper? The M201.326.2 delivers vernier resolution of 0.05 mm, consistent with industrial mechanical caliper practice, providing reliable repeatability for workshop checks. Is the caliper suitable for both metric and imperial measurements? Yes, the device features a metric vernier (1/20 mm) and an imperial vernier (1/128"), allowing direct reading in both systems. Which materials is the caliper intended for when checking components? The caliper measures metallic and non‑metallic parts dimensionally; its hardened stainless‑steel construction ensures durability when used on typical workshop components such as castings, aluminium housings and machined steel parts. Does the instrument comply with recognised norms? The instrument is manufactured to meet DIN 862 requirements for jaw lengths up to 200 mm; larger jaw configurations conform to the factory standard to maintain beam stiffness over the full 600 mm range. How does the fine adjustment improve measurement workflow? Fine adjustment enables precise positioning of the jaws with minimal overshoot, which speeds up setup and reduces measurement variability when performing repeat checks on assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
630mm Workshop Digital Caliper Long Jaws 100mm Touchscreen Wireless USB ISO 17025 Certified - Microtech Metrology
Take advantage of the combination of a 0–630 mm measuring range, ISO 17025 traceable calibration and integrated Wireless+USB data transfer for reliable large‑format measurement. Order the workshop caliper directly via Metav Werkzeuge or ask our consultants for application advice. Workshop caliper — Digital large‑range caliper with 2.4" colour touchscreen (Microtech Metrology) A Workshop caliper designed for industrial and heavy‑duty workshop use, offering a 0–630 mm measuring range, long 100 mm jaws, a colour 2.4" touchscreen and Wireless+USB data output for seamless measurement workflows. Digital colour 2.4" touchscreen display Wireless and USB data output Calibrated to ISO 17025, certificate included Fine‑adjustment and handcrafted measuring jaws Large‑range design for stable measurements and extended reach The caliper is purpose‑built for large‑range tasks that require both reach and stiffness. With a measuring span of 0–630 mm, the instrument belongs to the workshop size class for long‑beam calipers used in heavy machining, fixture and housing inspection. The longer beam geometry reduces the need for repositioning on large components and, combined with 100 mm long jaws, enables confident external and internal checks across extended surfaces while maintaining reproducibility. Traceable digital measurement and certified accuracy assurance The device features a digital readout with a standard resolution of 0.01 mm and is supplied fully calibrated to ISO 17025, including a calibration certificate. ISO 17025 calibration provides documented traceability to national standards and supports internal quality management systems; this makes the tool suitable for QA processes where documented measurement uncertainty and traceability are required. The calibration certificate is included with delivery, simplifying audit preparation and equipment registration. Precise handling and measurement control for reproducible results Built‑in fine adjustment and handcrafted jaws give tactile control for delicate alignment and slow, steady closing of the measuring faces. The specified measurement force 1–20 N helps explain the instrument’s suitability for repeatable contact across a variety of surface conditions: controlled force reduces operator‑related variation and improves consistency on serial checks. These ergonomic and mechanical features translate into fewer remeasurements and more dependable inspection results for production settings. Modern data capture and integration for efficient workflows Equipped with Wireless+USB data output and a 2.4" touchscreen display, the caliper supports both immediate readings at the bench and digital data collection for downstream analysis. Wireless transfer speeds up documentation and reduces transcription errors, while USB ensures direct export to inspection software or SPC systems. The combination of on‑device ease of use and networked data capture makes the instrument well suited to environments pursuing digital traceability or Industry 4.0 connectivity. For reliable large‑format measurement with traceable results, contact Metav Werkzeuge to discuss the Microtech Metrology workshop caliper (SKU 141006216) with ISO 17025 calibration and integrated Wireless+USB output. Technical data Article number: 141006216 GTIN: 4061905038891 ECLASS: 21170344 Manufacturer: Microtech Metrology Key figures Measuring range: 0–630 mm Resolution: 0.01 mm Jaw length: 100 mm Measurement force: 1–20 N Display: Colour 2.4" touchscreen Special features Digital with Wireless+USB data output Fine adjustment mechanism Handcrafted measuring jaws Supplied calibrated to ISO 17025 with certificate FAQ What measuring range does this caliper cover? The Microtech Metrology workshop caliper covers 0–630 mm, making it a large‑range instrument suitable for larger components and fixtures. Is the instrument supplied calibrated? Yes. The caliper is delivered fully calibrated to ISO 17025 and includes a calibration certificate for traceability and quality documentation. What data outputs are available for integration? Data transfer is provided via Wireless+USB, enabling both wireless capture for rapid documentation and USB connection for direct export to inspection or SPC systems. What resolution can be expected from the display? The digital readout offers a 0.01 mm resolution, appropriate for standard workshop and production quality control tasks. How do the fine adjustment and handcrafted jaws add value? The fine‑adjustment mechanism and handcrafted jaws enable controlled closing and precise contact geometry, which reduces operator error and improves repeatability for serial inspections with the Microtech Metrology caliper (SKU 141006216). Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
70mm 2mm Tip Measuring Insert R0.5 x 2 x 40mm For Depth Measurements - Metav IndustryLine
Taking advantage of a precision R0.5 tip and a rigid 70 mm shank, this measuring insert provides repeatable contact in deep or recessed measurement points while remaining compact and easy to mount. Order the measuring insert directly via Metav Werkzeuge or consult Metav's specialists for application advice. Measuring insert with tip for caliper adapter – R0.5 × 2 × 40 mm, 70 mm shank (Metav IndustryLine) The measuring insert combines a fine rounded tip geometry with a 70 mm mounting shank for accurate access to deep features and a stable hold in caliper adapters. Fine rounded tip R0.5 for precise contact 70 mm shank for stable mounting Compatible with caliper adapters Suited for recessed and deep-point measurement Accuracy where access is restricted The finely formed R0.5 tip gives a small, defined contact area that reduces positional ambiguity when probing narrow bores, steps or recesses. By concentrating contact force through a small radius, the probe minimises lateral play and improves repeatability compared with blunt probes. The geometry labelled R0.5 × 2 × 40 mm indicates a tip radius of 0.5 mm with a shaft section suitable for confined spaces, making the insert particularly useful when standard jaws cannot reach. This results in faster inspection cycles and fewer rejected parts due to measurement uncertainty. Reliable mounting and workshop compatibility A 70 mm shank and Ø5 mounting interface ensure the insert seats securely in commercially available caliper adapters and fixtures. The compact mass (approx. 0.05 kg) keeps the centre of gravity close to the adapter, reducing vibration and lever effects during manual measuring operations. As an accessory for analogue calipers, the probe integrates without electronics or data output, preserving the simplicity of traditional measuring workflows while extending the application range of existing tools. The robust design supports frequent in‑shop use and straightforward replacement when wear occurs. Practical benefits for quality control and inspection Designed as a practical metrology accessory, the insert shortens set‑up time for hard‑to‑reach checks and reduces the need for special fixturing. The product is categorised as measurement accessory and is intended to complement standard caliper equipment, improving the handling of recessed surfaces without altering the primary instrument. For specific measurement tasks or compatibility checks with a particular caliper adapter, Metav IndustryLine technical staff can provide guidance on fit and suitability to ensure the insert meets inspection requirements. Contact Metav Werkzeuge today to confirm adapter compatibility and arrange supply from Emmerich for prompt delivery and expert advice Technical data Article number: M240.321 GTIN: 4054469159546 Category: Accessory (measuring devices) Type: Analogue measuring insert Core measurements Shank length: 70 mm Mounting diameter: Ø5 mm Tip geometry: R0.5 × 2 × 40 mm Weight: 0.05 kg Customs tariff: 90178090 Design and features Intended use: Deep/recessed point measurement Compatibility: Caliper adapters (analogue) Construction: Probe tip and shaft for adapter mounting Delivery form: Single insert, accessory item FAQ What is the intended use of this insert? The measuring insert is intended for deep or recessed point measurements where standard caliper jaws cannot reach; it fits into caliper adapters to extend measurement capability. Which calipers or adapters are compatible with the insert? Compatibility depends on the adapter's mounting interface; the insert uses a Ø5 mm shank and is suitable for common caliper adapters designed to accept this diameter. Is the tip suitable for contact with soft surfaces? The R0.5 rounded geometry is small and precise; it reduces indentation risk compared with sharper probes but care is advised on very soft materials to avoid surface marking. Can the insert be used with digital calipers? The insert is a mechanical accessory; it can be used with calipers that accept the Ø5 shank, including digital models that have suitable adapters, but the insert itself provides no electronic output. How does the insert affect measurement repeatability? By providing a defined contact radius and a stable 70 mm shank, the probe improves positional consistency for recessed features, supporting more repeatable results in routine inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Digital Caliper Fine Adjustment Stainless Steel IP65 RB 5 Data Output, Plastic Case - Metav IndustryLine
The combination of an 800 mm measuring range, fine-adjustment thumb screw and hardened stainless steel construction ensures reproducible, large-format measurements for workshop and toolroom tasks; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital caliper M217.061.3 — large-format 800 mm range with fine adjustment (Metav IndustryLine) The Digital caliper M217.061.3 is a large-format, hardened stainless steel measuring instrument designed for precise dimensional checks in machine shops, fixture construction and heavy-duty workshop environments. Large 800 mm measuring range Fine adjustment for precise positioning Hardened stainless steel construction Digital display with mm/inch and preset Measurable reach for larger assemblies The 800 mm measuring range classifies this instrument as a large-format caliper, purpose-built where extended reach and profile stiffness are required. A 400 mm jaw length provides stable contact across broad surfaces, reducing deflection during handling and making the tool suitable for components such as housings, large fixtures and medium-sized shafts. The robust, fully hardened stainless steel structure keeps thermal drift and wear to a minimum, so measurements remain consistent even under repeated use. Precise readings and practical data handling Equipped with a digital display and a standard resolution of 0.01 mm, the instrument combines clear readability with practical data functions. The readout includes ON/OFF, mm/inch, 0/ABS, HOLD, TOL and PRESET keys for quick configuration, while a 3 V power supply provides dependable operation. The caliper meets a factory tolerance of 0.07 mm, giving a verifiable baseline for routine quality checks; a dedicated RB 5 data output enables integration with data-logging systems for documentation and process control, supporting efficient quality workflows. Robust transport and workshop readiness A fine-adjustment thumb screw permits controlled closing and reproducible zeroing, which is especially useful when aligning large parts or repeating set-ups. Supplied in a transport case (plastic or wooden depending on size), the unit is protected during transit—note that wooden cases for tools above 500 mm are intended primarily for transport rather than long-term storage. Backed by the Metav IndustryLine ethos of accessible precision, the instrument balances industrial durability with straightforward operation, helping workshops reduce measurement uncertainty and streamline inspection routines. Contact Metav Werkzeuge for tailored technical advice or to arrange delivery from our Emmerich warehouse and ensure the caliper fits the specific measurement task. Technical data Article number: M217.061.3 GTIN: 4054469111094 Eclass: 21170344 Tariff number: 90173000 Numbers / Core technical data Measuring range: 0–800 mm Jaw length: 400 mm Resolution: 0.01 mm Factory tolerance: 0.07 mm Power supply: 3 V Data output: RB 5 Designs / Special features Digital display with ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Fine-adjustment thumb screw Hardened stainless steel construction Supplied in transport case (plastic or wooden) Without scribing tip FAQ What is the measuring range of this caliper? The caliper offers a measuring range of 0–800 mm, making it suitable for large-format workshop and fixture measurements. What resolution and display functions does the instrument provide? The unit provides a resolution of 0.01 mm and a digital display with ON/OFF, mm/inch, 0/ABS, HOLD, TOL and PRESET functions for practical inspection work. Is the caliper suitable for industrial workshop use? Yes. The hardened stainless steel construction and fine-adjustment mechanism make the caliper robust enough for regular workshop use in machining and assembly environments. Does the caliper support data output for process documentation? Yes. The caliper includes an RB 5 data output for connection to data-loggers or quality-management systems, facilitating documented measurement traces. How is the instrument supplied for transport? The caliper is supplied in a transport case (plastic or wooden), with wooden cases commonly used for items above 500 mm to protect the instrument during shipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Digital Caliper Fine Adjustment With 300mm Jaw Length, Stainless Steel, Factory Standard 0.07mm, IP65? - Metav IndustryLine
Take advantage of a long measuring range combined with a fine 0.01 mm display and a hardened stainless‑steel build to keep production measurements reliable and repeatable. Order the caliper directly via Metav Werkzeuge or consult our specialists for integration advice and delivery from Emmerich. Digital Caliper M217.061.2 — 800 mm range, hardened stainless steel The Digital Caliper M217.061.2 is a long‑range precision instrument for large‑format measurements in metalworking, jig and fixture assembly, and heavy‑duty workshop inspection. 800 mm measuring range for large components Hardened stainless steel construction Digital display with mm/inch and preset functions Fine‑adjustment thumb wheel and protective case Reliable large‑format measurement for production control This long‑span caliper belongs to the category for larger measuring tasks and offers an 800 mm measuring range that suits components too big for standard bench tools. With a 0.01 mm display resolution and a declared factory standard 0.07 mm, the instrument provides a clear balance between reach and measurable precision. The larger range reduces the need for multiple instruments on the shop floor and speeds up set‑ups by allowing direct measurement of housings, carriers and fixtures. The numeric resolution given refers to the display step; practical repeatability will depend on handling and fixture practices, which is why the integrated fine‑adjustment helps to reduce operator‑induced scatter. Robust build and ergonomic control for repeatable results Manufactured from fully hardened stainless steel, the caliper is designed to resist deformation across its entire length and to withstand workshop environments. The fine‑adjustment mechanism allows controlled inching of the jaw for exact contact without overshoot, improving repeatability on larger parts. A protective transport case is supplied for safe storage and transit, and the instrument’s design avoids delicate protruding probes — it is supplied without a tip to favour robust handling. Together these features lengthen service intervals and reduce unplanned downtime in daily inspection routines. Digital functions that support quality workflows The digital readout includes ON/OFF, mm/inch, ABS/0, HOLD, TOL and PRESET functions to speed inspection and reduce transcription errors. TOL lets operators compare measurements against upper and lower limits at the point of measurement, while PRESET establishes a quick reference zero for comparative checks. The caliper runs on a 3 V power system and offers a data output labelled RB 5 for downstream logging or SPC systems, enabling simple traceability of measured values into quality control procedures. These functions make the instrument a practical choice when measurement data must be recorded or when shop‑floor tolerance checks are performed frequently. Discuss large‑format measurement and supply options with Metav Werkzeuge for the Metav IndustryLine digital caliper M217.061.2; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M217.061.2 GTIN: 4054469111087 Category: Messschieber (digital caliper) eClass: 21170344 Customs tariff number: 90173000 Facts Measuring range: 0–800 mm Resolution (display): 0.01 mm Inch resolution: 0.0005 in Power: 3 V Jaw length: 300 mm Nominal factory tolerance: 0.07 mm Special features Material: fully hardened stainless steel Digital display with ON/OFF, mm/inch, ABS/0, HOLD, TOL, PRESET Fine‑adjustment thumb wheel Data output: RB 5 Supplied without tip Protective transport case for safe storage and transport FAQ What is the maximum measuring length of this caliper? The maximum measuring length is 0–800 mm; the long span suits large components and assemblies where standard calipers are insufficient. How precise is the measurement readout? The digital display reads in 0.01 mm steps with a declared factory standard of 0.07 mm, giving a practical combination of resolution and industrial robustness. Is the caliper robust enough for workshop environments? Yes. The instrument is manufactured from fully hardened stainless steel and is supplied in a protective transport case to withstand workshop handling. Which digital functions are available on the display? The readout offers ON/OFF, mm/inch, ABS/0, HOLD, TOL and PRESET functions to assist tolerance checks and reference presetting during inspections. Can measurement data be output for SPC or logging? A data output designated RB 5 is provided for integration into logging or SPC workflows, enabling measured values to be recorded externally. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Digital Caliper Fine Adjustment, No Probe, Stainless Hardened, 0.01mm Resolution, RB5 Data Output, Supplied In Case - Metav IndustryLine
Take advantage of the combination of 800 mm reach, fine adjustment and integrated RB 5 data output for efficient, reproducible measurement routines; order the instrument directly via Metav Werkzeuge or request application advice from our consultants. Digital Caliper M217.061.1 — 800 mm range, fine adjustment (Metav IndustryLine) Digital Caliper M217.061.1 is a large-range digital caliper designed for workshop and machine‑shop measurement tasks where extended reach and controlled positioning are required 800 mm measuring range for large components Fully hardened stainless steel construction Fine adjustment for controlled positioning RB 5 data output for process integration Long reach with mechanical stability for workshop use The extended 800 mm measuring span places this instrument in the large-range calipers (500–1,000 mm) category, offering access to sizeable components without sacrificing rigidity. Constructed from fully hardened stainless steel, the frame resists wear and maintains straightness over repeated use, which reduces measurement drift when comparing multiple parts. The result is a dependable tool for fixture and housing checks, large clamp setups and routine shop inspection where a generous measuring range and stable guidance are decisive for reproducible results. Precise, repeatable readings and easy data handling Equipped with a digital readout and a resolution of 0.01 mm, this instrument provides clear numerical values suitable for standard machining tolerances. The display includes ON/OFF, mm/inch conversion, ABS/zero, HOLD, TOL and PRESET functions for flexible workflows, while the RB 5 data output enables direct transfer of measurements to quality-control systems or SPC software. A fine adjustment mechanism supports controlled jaw travel for sensitive positioning, so operators can align measuring faces gently and consistently, improving repeatability during serial inspection. Practical delivery and workplace integration The caliper is supplied in a protective case for secure transport and storage, and operates from a 3 V power supply for extended field use. The instrument conforms to a factory tolerance of 0.07 mm, stated as the standard for the device, and includes a 200 mm jaw length for deep insertion when required. These characteristics make the device suitable for production floors and toolrooms that need robust digital measurement with straightforward integration into existing data workflows. Discuss the Metav IndustryLine M217.061.1 with Metav Werkzeuge to ensure it matches measurement routines and traceability requirements — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M217.061.1 GTIN: 4054469111070 Category: Calipers / Messschieber Material: Fully hardened stainless steel Measuring range: 0–800 mm Facts Resolution: 0.01 mm Inch resolution: 0.0005 in Jaw length: 200 mm Power: 3 V Customs tariff: 90173000 Special features Digital display with ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Fine adjustment for accurate jaw positioning Data output: RB 5 for process integration Factory tolerance: 0.07 mm (Werksnorm) Supplied in protective case Large-range caliper suitable for workshop and machine shop use FAQ Is the caliper suitable for measuring large castings and housings? The M217.061.1 features an 800 mm measuring range and robust, hardened stainless-steel construction, making it suitable for components such as housings and large assemblies. What level of accuracy can be expected from the device? The instrument offers a resolution of 0.01 mm and is supplied to a factory tolerance of 0.07 mm, appropriate for standard workshop and machine‑shop inspection tasks. Does the caliper provide electronic data output for quality systems? Yes — the caliper includes an RB 5 data output interface to integrate measurements directly into SPC or data‑collection workflows. Is the instrument delivered ready for use and protected during transport? The caliper is supplied in a protective case for transport and storage and operates from a 3 V power supply; fine adjustment and digital functions are ready for immediate use upon receipt. What material is used for the measuring faces and beam? The measuring faces and beam are manufactured from fully hardened stainless steel, optimised for wear resistance and long service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Digital Caliper With 150mm Adjustable Jaw, Stainless Steel, Fine Adjustment, 0.01mm Resolution, Supplied In Case - Metav IndustryLine
Benefit from a combination of a wide 800 mm measuring range, hardened stainless steel construction and a fine‑adjustment slider for reliable, repeatable workshop measurements; order the Digital Caliper M217.258 directly via Metav Werkzeuge or ask our consultants if guidance is needed. Digital Caliper M217.258 — large‑range digital caliper with 800 mm range and fine adjustment (Metav IndustryLine) Digital Caliper M217.258 is a large‑format precision instrument for workshop, fixture and mould measurement, combining a long measuring span with a movable 150 mm jaw and a fine‑adjustment mechanism for controlled, exact positioning. 800 mm measuring range for large components Hardened stainless steel construction Fine‑adjustment slider for precise positioning Digital display with mm/inch and ABS/PRESET Long‑reach precision for industrial components This caliper is designed for measurements where reach and stability matter: the 800 mm measuring range places it in the large‑range caliper class (suitable for components up to 1,000 mm), delivering the scope required for fixtures, housings and large assemblies. The construction from hardened stainless steel ensures profile rigidity over the full span, reducing deflection and preserving measurement reproducibility. The extended jaw geometry and robust beam make it a practical choice where single‑hand operation is still preferred but extra reach is required. Controlled measurement technique that reduces user error A fine‑adjustment slider provides small, controlled increments when closing the jaws, which improves repeatability and reduces overshoot on delicate features. The instrument’s digital display supports mm/inch selection and features ABS and PRESET functions, enabling quick zeroing and reference‑point storage. These elements together save time during batch inspection and speed up set‑ups on the shop floor, turning a measurement task that once required two steps into a single, dependable action. Workflow and connectivity for modern workshops The caliper includes an RB 2 data output for straightforward integration into data collection systems and inspection logs, allowing measurement values to be recorded without transcription errors. The display layout—featuring ON/OFF, mm/inch, ZERO, ABS and PRESET keys—keeps operation simple while supporting traceable measurement procedures. Supplied to factory standard (Werksnorm), the gauge suits quality control routines and repetitive production checks where efficiency and documented results are essential. For tailored advice on specifying the Metav IndustryLine Digital Caliper M217.258 or to confirm suitability for particular components, contact Metav Werkzeuge GmbH in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for prompt, expert assistance Technical data Article number: M217.258 GTIN: 4054469111292 Eclass: 21170344 Tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Measuring range: 0–800 mm Jaw length: 150 mm Resolution: 0.01 mm Inch resolution: 0.0005 in Digital: yes Special features Material: hardened stainless steel Fine‑adjustment slider Digital display with ON/OFF, mm/inch, ZERO, ABS, PRESET Movable (adjustable) jaw Data output: RB 2 Norm: Werksnorm FAQ What accuracy can be expected from this caliper? The advertised resolution of the instrument is 0.01 mm; combined with its hardened construction and careful handling, the Digital Caliper M217.258 provides repeatable results suitable for workshop and production checks. Is the caliper suitable for large workshop components? Yes — with an 800 mm measuring range and a 150 mm movable jaw, the instrument is intended for larger components such as fixtures, housings and assembly parts. Can measurement values be recorded electronically? Measurement data can be exported via the RB 2 data output, enabling logging to inspection systems or data collection devices without manual transcription. How does the fine‑adjustment slider help in practice? The fine‑adjustment mechanism allows controlled approach to a measurement point, reducing the risk of over‑clamping and improving consistency when gauging small or delicate features. What standard does the caliper comply with for delivery? The caliper is supplied to factory standard (Werksnorm) and carries the features described for industrial workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Digital Caliper With 150mm Deep Jaws, Fine Adjustment, Stainless Steel, IP Protection Not Specified - Metav IndustryLine
Combine long-range measuring capability with a fully hardened stainless-steel construction and a fine-adjustment mechanism for repeatable results on large components. The integrated digital display with mm/inch, PRESET and HOLD functions speeds up inspection routines. Order via Metav Werkzeuge or consult our specialists for application advice. Digital Caliper M217.061 — 800 mm range, fine-adjustment, Metav IndustryLine The Digital Caliper M217.061 is a heavy‑duty, large-format measuring instrument designed for precision shop and fixture work, offering an 800 mm measuring range with a 150 mm jaw length and factory tolerance for industrial use. 800 mm measuring range, 150 mm jaws Hardened stainless-steel construction Fine-adjustment vernier for exact setting Digital display with mm/inch and preset Accurate long‑range measurement for large components The caliper is built for applications where reach and repeatability matter: the 800 mm range places it in the Large class (500–1,000 mm) of instruments, where profile stiffness is essential to avoid sag and ensure reproducible results along the whole measuring length. With a resolution of 0.01 mm (0.0005 in) and a factory tolerance of 0.07 mm, this instrument provides quantifiable performance suitable for incoming inspection, jig and fixture checks, and dimensional verification of large housings. The specification is presented as a practical guarantee: greater reach without sacrificing the comparability of individual measurements. Robust construction and simple, precise handling Manufactured from fully hardened stainless steel, the caliper resists wear and maintains jaw geometry under regular workshop use, which reduces recalibration frequency and long‑term cost of ownership. The integrated fine‑adjustment control and 150 mm jaw length allow controlled approach and exact positioning on edge or shoulder measurements; this reduces measuring error caused by hurried manual movement. The digital display consolidates functions—mm/inch, 0/ABS, HOLD, TOL and PRESET—so routine checks and pass/fail evaluations become faster and less error‑prone, increasing throughput in quality control processes. Integration into inspection workflows and supplier support Electronic connectivity and output options such as RB 5 data output simplify capture of measurement data into inspection logs or SPC systems, supporting traceability and efficient documentation. The instrument follows the manufacturer's factory norm and is supplied with the indicated Werksnorm 0.07 mm, giving a clear baseline for acceptance in production environments. For purchasing departments and workshop managers the practical advantages are straightforward: a large measuring envelope, resilient materials and integrated digital aids deliver measurable time savings and fewer repeat measurements, while Metav IndustryLine backing provides assured availability and supply continuity. For precise large‑format measurement needs contact Metav Werkzeuge for a personalised specification review of the Metav IndustryLine Digital Caliper M217.061 with 800 mm range and fine‑adjustment Technical data Article number: M217.061 GTIN: 4054469111063 Brand: Metav IndustryLine Material: fully hardened stainless steel Factory norm: Werksnorm 0.07 mm Facts Measuring range: 0–800 mm Jaw length: 150 mm Resolution: 0.01 mm / 0.0005 in Power: 3 V Data output: RB 5 Special features Digital readout with mm/inch, 0/ABS, HOLD, TOL and PRESET Fine‑adjustment mechanism Without probe (no tip supplied) Robust construction for shop use FAQ What measuring range does this caliper cover? The caliper covers a measuring range of 0–800 mm, making it suitable for large components and fixtures that require long, reproducible measurements. Is the instrument suitable for production inspection and data capture? Yes. The M217.061 features a digital readout and RB 5 data output for straightforward integration into inspection documentation and SPC workflows. What accuracy and resolution can be expected? The instrument offers a resolution of 0.01 mm (0.0005 in) and is supplied to the factory tolerance of Werksnorm 0.07 mm, providing clear limits for quality control use. What materials is the caliper made from and why does that matter? The caliper is made from fully hardened stainless steel, which improves wear resistance and maintains jaw geometry for consistent measurement over time in workshop environments. Does this caliper include fine adjustment and which display functions are available? Yes. It includes a fine‑adjustment control and a digital display with mm/inch, 0/ABS, HOLD, TOL and PRESET functions to aid precise setting and quick assessments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Digital Caliper With 150mm Depth Rods, Stainless Hardened, IP65- Metav IndustryLine
Take advantage of a long-range measuring solution that combines robust stainless-steel construction, a generous 800 mm measuring range and a precise 0.01 mm resolution for dependable workshop and fixture checks; the fine-adjustment spindle and RB 5 data output ensure repeatable setting and smooth transfer into inspection routines. Order the Digital caliper M217.048.1 directly via Metav Werkzeuge or ask our consultants if needed. Digital caliper M217.048.1 — 800 mm stainless, fine-adjustment, RB 5 output (Metav IndustryLine) The Digital caliper M217.048.1 is a long-range, hardened stainless-steel digital caliper with fine adjustment and integrated data output, designed for reliable measurement of large components in machining, fixture and workshop environments. 800 mm measuring range for large components Hardened stainless-steel construction Fine-adjustment spindle for precise positioning Integrated RB 5 data output and function keys Reliable measurement for large components With an 800 mm measuring range, this long‑bar digital caliper is intended for measurements that exceed standard workshop lengths while still offering manageable handling and repeatable results. Classified in the long-range bracket for calipers (500–1,000 mm), it balances reach and stiffness so that components such as large housings, fixtures or shafts can be measured without multiple setups. The factory standard tolerance is Werksnorm 0.06 mm, providing a clear reference for quality checks. Precision handling and fine positioning The instrument is made from fully hardened stainless steel, which delivers wear resistance and long service life under daily shop use. A dedicated fine‑adjustment spindle lets operators position the jaws with incremental control, reducing overshoot and variability that can occur when working at long ranges. The digital readout offers a 0.01 mm resolution, making routine dimensional work both fast and precise; the inch reading is available with a 0.0005 in resolution for cross-unit checks. Seamless data capture and functional control Equipped with an RB 5 data output, the caliper supports direct transfer of measurements into inspection software or dataloggers, streamlining documentation and eliminating transcription errors. The display includes practical function keys — ON/OFF, mm/inch, zero/ABS, HOLD, TOL and PRESET — that speed common workflows such as setting limits or freezing values for downstream recording. These features enhance traceability and simplify integration into standardised quality procedures. Built for everyday workshop reliability Design choices focus on consistent performance: hardened jaws, a robust slide and a compact electronics module powered by 3 V ensure dependable operation. The instrument is supplied in a transport case for protection during handling and storage, which aids workshop logistics and reduces the risk of damage during shifts between bench and machine. At a weight of approximately 2.45 kg, the caliper is substantial enough for stability yet still portable for bench or site use. For stock availability, technical advice or to arrange purchase of the Metav IndustryLine Digital caliper M217.048.1, contact Metav Werkzeuge for direct assistance and supply from Emmerich. Technical Data Article number: M217.048.1 GTIN: 4054469110875 Manufacturer: Metav IndustryLine Facts Measuring range: 0–800 mm Resolution: 0.01 mm Inch resolution: 0.0005 in Weight: 2.45 kg Jaw length: 150 mm Power supply: 3 V Factory tolerance: Werksnorm 0.06 mm Data interface: RB 5 Design & Special features Material: fully hardened stainless steel Digital display functions: ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Fine-adjustment spindle for precise jaw positioning Supplied in transport case for protection Suitable for workshop and fixture measurement of large components FAQ Is the caliper delivered calibrated? The caliper is supplied with the factory standard tolerance (Werksnorm 0.06 mm); this is the delivered specification for the Digital caliper M217.048.1 from Metav IndustryLine. Which measurement outputs are available for data capture? Measurement transfer is handled via the integrated RB 5 data output; the Digital caliper M217.048.1 also offers HOLD and PRESET functions to aid recording and process checks. What makes this caliper suitable for larger workpieces? The 0–800 mm measuring range places it in the long-range category (500–1,000 mm), giving the reach and profile stiffness required for larger housings, fixtures and shafts while retaining a manageable handling profile. Can the instrument switch between metric and imperial units? Yes — the display supports mm/inch conversion via the dedicated mm/inch key for immediate cross-unit verification. What protections and delivery accessories are included? The tool is supplied in a protective transport case to reduce handling damage and simplify storage between measuring tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Digital Precision Caliper With 2.4" Colour Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of ISO 17025 calibration, an 800 mm measuring range and wireless data transfer to streamline large-part inspection and traceable quality assurance; order the ISO‑calibrated measuring solution from Metav Werkzeuge or consult our specialists for integration advice. Digital Caliper — 800 mm range, colour touchscreen, Microtech Metrology Digital Caliper for large‑format precision measurement, combining an extra‑long 800 mm measuring range with a 2.4" colour touchscreen and wireless data transfer for efficient shop‑floor workflows. 800 mm extra-long measuring range ISO 17025 calibration with certificate Colour 2.4" touchscreen display Wireless and USB data output Reliable measurement capability for large components This instrument is designed for situations where reach and reproducibility matter: the 800 mm measuring range places it in the large‑range caliper class, making it suitable for components in fixture, mould and heavy machining contexts. The aluminium construction keeps the instrument comparatively light while preserving rigidity over long spans. For routine quality control, the combination of long jaws and a 400 mm jaw length improves access to deep slots and large faces, reducing the need for secondary fixturing and accelerating throughput. The result is a measurable increase in operational efficiency when examining sizeable workpieces. Traceable accuracy and what it means in practice Delivered fully calibrated to ISO 17025, this caliper includes an official calibration certificate, ensuring traceability for audits and supplier acceptance. The instrument offers a resolution of 0.01 mm and an operational accuracy of ±0.03 mm, figures that translate into dependable pass/fail decisions on critical dimensions. For production teams and metrology labs, ISO‑level calibration reduces uncertainty in measurement results and simplifies conformity documentation, thereby supporting tighter process control and fewer rework loops. Fast data capture and integration into workflows Equipped with a 2.4" colour touchscreen and dual data interfaces (Wireless and USB), the device facilitates rapid capture of measured values and smooth transfer to inspection software or SPC systems. The touchscreen simplifies mode selection and zeroing, while wireless output reduces trailing cables and enables measurement in constrained setups. The USB option provides an immediate wired link for secure data logging. Together these features minimise manual transcription, cut administrative time and help close the loop between measuring and corrective action. Built for workshop use and straightforward handling Constructed from aluminium, the instrument balances corrosion resistance with manageable weight for two‑handed or single‑operator measurement tasks. The robust digital electronics and tactile jaw assembly are intended for regular use in industrial environments rather than delicate laboratory-only scenarios. Maintenance is straightforward — periodic verification and the provided ISO 17025 certificate keep calibration status clear — and the device’s intuitive operation reduces operator training time, so inspection tasks can be delegated without compromising consistency. Contact Metav Werkzeuge to discuss integrating the Microtech Metrology ISO 17025‑calibrated digital caliper (SKU 142408442) into production and to arrange delivery or technical consultation. Technical Data Article number: 142408442 GTIN: 4061905455292 ECLASS: 21170344 Manufacturer: Microtech Metrology Material: Aluminium Numbers Measuring range: 0–800 mm Max measuring range: 800 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Jaw length: 400 mm Display: 2.4" colour touchscreen Special features Data output: Wireless + USB ISO 17025 calibration with certificate Digital display, touch operation Extra-long caliper (large-range category) Aluminium construction FAQ What is the measuring range of this caliper? The digital caliper offers a measuring range of 0–800 mm, providing extended reach for large components and assemblies. Is the instrument delivered calibrated and traceable? Yes — the Microtech Metrology digital caliper is supplied fully calibrated to ISO 17025 and includes the corresponding calibration certificate. What accuracy and resolution can be expected? The instrument provides a resolution of 0.01 mm and an accuracy of ±0.03 mm under recommended measurement conditions. How can measurement data be exported? Measurement values can be transmitted wirelessly or via USB for direct logging into inspection software or SPC systems. Which materials and applications is the caliper suitable for? With an aluminium frame and large‑range jaws, the tool is intended for workshop and production inspection of sizeable metal and plastic components where repeatable dimensional control is required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
800mm Precision Caliper Without Probe Fine Adjustment Monoblock Stainless Steel 150mm Jaws DIN 862 - Metav IndustryLine
Take advantage of the combination of robust monoblock construction, a wide 800 mm measuring range and a fine-adjustment screw for reproducible results on large components; order the instrument directly via Metav Werkzeuge or consult the Metav team for application advice. Workshop caliper M201.328 — 800 mm analogue caliper with fine adjustment, Metav IndustryLine Workshop caliper M201.328 for large-format measuring tasks in metalworking and fabrication, designed as a monoblock instrument for stable handling and repeatable readings 800 mm measurement range for large components Hardened stainless steel with matt chrome scale Fine-adjustment screw for precise setting DIN 862 conformity for workshop accuracy Stable design for repeatable measurements on large parts The monoblock construction delivers a rigid measuring frame that reduces bending and vibration during long-span measurements. Built from hardened stainless steel with a matt-chrome scaled surface, the instrument resists corrosion while keeping the scale legible under workshop lighting. With an 800 mm measuring range and 150 mm jaws, the caliper is targeted at larger assemblies where stiffness directly improves repeatability. The mass of the instrument contributes to stable contact during a measurement, which in turn reduces variability between successive readings. Precise setting and clear analogue reading for efficient inspection Equipped with a dedicated fine-adjustment screw, the caliper enables careful closing and positioning of the jaws before the reading is taken, making it quicker to obtain a stable measurement with minimal overshoot. The vernier arrangement gives a resolution of 0.05 mm on the lower scale, consistent with common workshop tolerances; an additional fine vernier on the upper scale refines alignment during coarse positioning. This combination of setting control and vernier clarity speeds up routine checks and reduces the need for repeat measurements, improving throughput in quality control tasks. Suited to workshop routines and normative accuracy requirements Classified as a large-range (500–1,000 mm) caliper, the instrument bridges the gap between standard and heavy-duty measuring tools: long enough for sizeable components yet still manageable for single-person use in many setups. The measuring geometry and the declared conformity to DIN 862 (applicable given the jaw length) provide a familiar reference frame for machinists and inspectors, simplifying integration into existing inspection procedures. Robust finishing and the practical jaw length make the tool effective for external, internal and step measurements where a trusty analogue instrument is preferred. Choose the Metav IndustryLine M201.328 for reliable large-range workshop measurement and contact Metav Werkzeuge in Emmerich for tailored technical advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M201.328 GTIN: 4054469101552 Brand: Metav IndustryLine Material: hardened stainless steel, matt-chrome scale Facts Measuring range: 0–800 mm Jaw length: 150 mm Resolution (vernier): 0.05 mm Weight: 5.5 kg Standard: DIN 862 (applies for this jaw length) Special features Monoblock frame Fine-adjustment screw Vernier configuration: upper and lower vernier scales Suitable for workshop, metalworking and fabrication applications FAQ What measuring range does the caliper cover? The M201.328 covers a measuring range of 0–800 mm, placing it in the large-range caliper category for sizeable components. Is the instrument corrosion-resistant and suitable for workshop use? Yes, the caliper is made from hardened stainless steel with a matt-chrome scale finish, offering good corrosion resistance and durability in workshop environments. How precise is the analogue reading on this caliper? The vernier arrangement on the instrument provides a reading resolution of 0.05 mm, matching common industrial workshop tolerances. Does the caliper meet recognised standards? The tool is specified in accordance with DIN 862 for the given jaw length, providing a normative basis for workshop accuracy and inspection routines. Can the M201.328 be used for internal, external and step measurements? Yes, the caliper’s geometry supports external, internal and step measurements, making it versatile for routine inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Caliper With 300mm Jaws, Fine Adjustment, Monoblock, 0.05mm Vernier, Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of robust stainless‑steel construction, an 800 mm measuring range and a precise fine‑adjustment mechanism for reproducible large‑format measurements in the workshop. Order the Metav IndustryLine Workshop Caliper M201.338.2 directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine Workshop Caliper M201.338.2 — 800 mm stainless monoblock with fine adjustment A robust Metav IndustryLine Workshop Caliper M201.338.2 engineered for heavy‑duty external, internal and step measurements up to 800 mm in demanding workshop environments Hardened stainless‑steel construction Monoblock design for high rigidity Fine‑adjustment wheel for precise setting Delivered in a protective transport case Large‑range accuracy for heavy workshop work The caliper offers an 800 mm range, placing it in the large‑range category for workshop measurement where profile stiffness and repeatability are decisive. The hardened stainless steel beam with a matt‑chromed scale resists wear and ensures legible graduations throughout its service life. With a vernier system reading of 0.05 mm and a combined inch/mm vernier — 1/128" (top) and 1/20 mm (bottom) — the instrument supplies a clear analogue indication that is well suited to routine quality checks and set‑up tasks on sizeable components. This configuration supports efficient process control where quick, verifiable readings are required without the need for electronic power. Practical handling and repeatable results A finely machined fine‑adjustment wheel allows slow, controlled closing of the jaws to the actual measuring faces, reducing the risk of overshoot and improving repeatability when setting to reference sizes. The monoblock design increases transverse stiffness, which lowers deformation during measurement and contributes to consistent readings over the entire measuring length. Pointed jaws are fitted for access to narrow recesses and for locating on specific features, while the hardened surfaces maintain dimensional integrity under frequent use. These mechanical advantages translate into measurable time savings and reduced rework in production and fixturing workflows. Compliance, transport and workshop integration The caliper is produced to match the referenced guideline DIN 862 (with specified conditions for jaw length), which underpins its suitability for industrial metrology routines. Delivery includes a protective transport case, appropriate for large instruments; for items of this scale the case is primarily intended for transport protection rather than long‑term storage. Marked technical identifiers and traceable codes simplify stockkeeping and integration into workshop tool inventories. For additional technical data or calibration queries, Metav’s specialists can supply extended details and support via email or telephone to ensure the instrument fulfils the specific application requirements. Contact Metav Werkzeuge today to arrange supply of the Metav IndustryLine workshop caliper M201.338.2 and to benefit from expert advice and reliable delivery from Emmerich. Technical data Article number: M201.338.2 GTIN: 4054469101811 ECLASS: 21170344 Tariff number: 90173000 Facts Measuring range: 0–800 mm Jaw length: 300 mm Vernier readings: 1/128" (top) and 1/20 mm (bottom) Resolution / graduation: 0.05 mm Conformity note: DIN 862 (see jaw‑length conditions) Special features Material: hardened stainless steel, matt‑chromed scale Monoblock construction for increased stiffness Fine‑adjustment mechanism for controlled setting Pointed jaws for access to narrow features Protective transport case included (for transport protection) FAQ What measuring tasks is this caliper best suited to? The Metav IndustryLine Workshop Caliper M201.338.2 is intended for large‑format workshop measurements such as external, internal and step dimensions on fixtures, housings and clamping components up to 800 mm. How precise is the analogue reading on this caliper? The sliding scale provides a graduation of 0.05 mm and a dual vernier (1/128" top; 1/20 mm bottom), giving a robust analogue reading suitable for workshop tolerance checks and set‑up operations. Does the instrument meet recognised standards? Yes—the design and scale follow the conditions referenced in DIN 862, with applied requirements depending on jaw length as noted by the manufacturer. Is the caliper supplied ready for immediate use and safe for transport? The caliper is delivered in a protective transport case appropriate for large tools; the case is designed primarily for transport protection. For further handling or calibration details, Metav Werkzeuge can be contacted. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Caliper With 400mm Jaws, 0.05mm Vernier, Fine Adjustment, Monoblock, Stainless Steel, Supplied In Case - Metav IndustryLine
Robust 800 mm measuring range, hardened stainless steel construction and a precise fine‑adjustment mechanism ensure repeatable workshop results; order the caliper directly via Metav Werkzeuge or consult our specialists for technical clarification. M201.338.3 Workshop Caliper with Pointed Jaws — 800 mm Range, Fine Adjustment (Metav IndustryLine) The M201.338.3 is a workshop caliper for large‑format components, combining a monoblock frame and fine‑adjustment for stable, repeatable measurements across long reaches. Monoblock frame for increased rigidity 800 mm measuring range for large components Fine‑adjustment thumb screw for precise positioning Hardened stainless steel with matt‑chrome scale Reliable large‑range measurement for heavy workshop tasks The 800 mm measuring range places this instrument in the large‑range caliper class, designed for components that exceed standard bench sizes. The monoblock construction increases profile stiffness, reducing bending and improving repeatability when measuring long parts. Long 400 mm jaws extend reach into deep recesses and across large assemblies while the matt‑chrome scale resists reflections and wear, aiding clear reading in workshop lighting. This combination supports efficient in‑line checks and fixture setup, reducing rework in fabrication and assembly. Controlled positioning for consistent results A dedicated fine‑adjustment mechanism allows smooth, metered closing and prevents overshoot during contact with the measured surface; this reduces user‑induced scatter and makes serial checks faster and more consistent. The caliper is fitted with pointed jaws, which are useful for accessing narrow grooves, slots or centre points on larger parts where standard jaw tips would be impractical. The overall design balances reach and usability so that longer measurements remain manageable without compromising stability. Industry‑compatible vernier and normative guidance This instrument is an analogue caliper with vernier scales set to 1/128" (top) and 1/20 mm (bottom), providing a conventional metric vernier reading equivalent to 0.05 mm resolution, suitable for robust workshop control and fittings work. The product follows DIN 862 guidance for jaw and beak geometry (beak length rules applied up to 200 mm, with larger dimensions managed according to factory norms), ensuring the tool integrates into established quality processes and measurement routines without surprise. Workshop delivery and traceable workshop performance Supplied as a workshop tool, the instrument is finished in hardened stainless steel to resist corrosion and mechanical wear in demanding environments. Delivery includes a protective transport case to safeguard the instrument during shipment and handling. As part of the Metav IndustryLine, the caliper is aimed at machine shops, toolrooms and fixture builders who require a balance of reach, robustness and straightforward mechanical operation for daily measurement tasks. For robust large‑format workshop measurement, choose the Metav IndustryLine M201.338.3—contact Metav Werkzeuge in Emmerich for application advice and reliable delivery: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: M201.338.3 GTIN: 4054469101828 Category: Messschieber / Calipers Manufacturer: Metav IndustryLine Facts Measuring range: 0–800 mm Measuring range (max): 800 mm Measuring range (min): 0 mm Jaw length: 400 mm Vernier: 1/128" (top) and 1/20 mm (bottom) Tariff code: 90173000 Special features Monoblock construction Fine‑adjustment mechanism Pointed jaws for narrow features Hardened stainless steel with matt‑chrome scale Analogue vernier instrument Delivery in protective transport case Norm: DIN 862 (beak length rules; factory norm for longer beaks) FAQ What measuring range does this caliper cover? The M201.338.3 covers a measuring range from 0 to 800 mm, intended for large‑format workshop measurements. What resolution does the vernier provide? The caliper uses vernier scales of 1/128" (top) and 1/20 mm (bottom), corresponding to a metric vernier step of 0.05 mm. What materials and finish are used? Constructed from hardened stainless steel with a matt‑chrome scale finish for wear resistance and reduced glare. Are the long jaws suitable for deep or recessed measurements? Yes; the 400 mm jaw length provides extended reach into deep recesses, while the monoblock frame helps maintain stiffness over the extended span. Is a protective case included with delivery? Yes; the instrument is supplied in a transport case to protect it during shipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Caliper With Pointed Jaws, Fine Adjustment, Hardened Stainless Steel 0.02mm Resolution, Supplied In Case - Metav IndustryLine
Benefit from the combination of long‑range reach, robust monoblock construction and precise vernier resolution to ensure reproducible measurements for large components; order the caliper directly via Metav Werkzeuge or consult the specialists if further advice is required. M201.308 Workshop Caliper with Pointed Jaws — 800 mm, 0.02 mm Vernier (Metav IndustryLine) The M201.308 Workshop Caliper is a robust, long‑beam analogue caliper designed for large‑format metalworking and workshop measurement tasks, offering fine adjustment and durable stainless‑steel construction for reliable everyday use 800 mm measuring range for large components Monoblock construction for increased rigidity Fine‑adjustment slide for precise positioning Hardened stainless steel with matt‑chrome scale External, internal and step measurement capability Long reach and measured reliability for large workpieces The 800 mm measuring range classifies this instrument in the large‑range category, making it suitable where extended span and repeatability matter. The vernier resolution of 0.02 mm provides high mechanical precision for analogue measurement tasks and supports typical workshop tolerances; when repeatable results are required over greater distances, the long beam design reduces handling error and keeps measurement variance low. This makes the caliper particularly useful in heavy‑duty metalworking, fixture inspection and the measurement of larger housings or assemblies where a standard 150–300 mm tool would be insufficient. Stiff construction and corrosion resistance for daily industrial use A monoblock frame and hardened stainless steel body combine to deliver dimensional stability and resistance to shop contamination. The matt‑chrome scale improves legibility under workshop lighting and reduces glare, while the one‑piece construction minimises play between beam and slider. These design choices reduce elastic deformation during measurement and increase the useful life of the tool, supporting continuous operation in industrial or trade environments where tools are subject to knocks and regular use. Precise positioning and practical jaw geometry A smooth fine‑adjustment slide allows micro‑positioning of the slider for accurate closing on the measured feature, which is essential when measuring deep grooves or step faces. The caliper’s jaws include extended pointed tips and a jaw length 150 mm that enable access to recesses and bores otherwise difficult to reach. The dual vernier arrangement (imperial division on top and metric division below) provides versatile reading options on a single instrument, simplifying cross‑reference tasks without digital conversion. Versatile measurement modes and workshop compatibility Designed for external, internal and step measurements, the caliper supports the four classic measuring modes of a workshop instrument. The analogue format and durable finish ensure the tool integrates well into established inspection processes and manual quality control workflows. Supplied to meet the manufacturer's standard (Werksnorm), it is a practical instrument for shops seeking a robust, no‑frills solution where mechanical reliability and simple, immediate readings remain key. For dependable large‑range measurement choose the Metav IndustryLine M201.308 and contact Metav Werkzeuge for tailored advice and supply from Emmerich. Technical Data Article number: M201.308 GTIN: 4054469101286 Manufacturer: Metav IndustryLine / Metav Werkzeuge GmbH Facts Measuring range: 0–800 mm Resolution: 0.02 mm (vernier) Jaw length: 150 mm Construction: Monoblock Special features Material: hardened stainless steel with matt‑chrome scale Measurement types: external, internal and step measurement Adjustment: fine‑adjustment slide Scale type: analogue vernier (dual divisions) Conformity: Werksnorm FAQ What is the measuring range of this caliper? The caliper has a measuring range of 0–800 mm, suitable for large components and long‑span measurements. How precise is the analogue vernier reading? The instrument provides a vernier resolution of 0.02 mm, offering high mechanical precision for analogue measurements. Is the caliper suitable for internal and step measurements? Yes, the design supports external, internal and step measurements as standard workshop functions. What material and finish does the caliper have? The body is made from hardened stainless steel with a matt‑chrome scale for improved durability and legibility. Does the caliper include fine adjustment for positioning? Yes, a fine‑adjustment slide is incorporated to enable precise slider positioning during measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Caliper With Pointed Jaws, Fine Adjustment, Monoblock, 0.05mm Resolution, Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of a large 800 mm measuring range, hardened stainless steel construction and a fine-adjustment screw for robust, repeatable workshop measurements; order the M201.338.1 workshop caliper directly via Metav Werkzeuge or contact the Metav consultants for technical advice. M201.338.1 Workshop Caliper — 800 mm, monoblock, fine adjustment (Metav IndustryLine) The M201.338.1 is a workshop caliper designed for large-component measurement tasks, combining a long measuring span with a monoblock profile and precision fine adjustment for controlled contact and reproducible readings 800 mm measuring range Monoblock design for high stiffness Hardened stainless steel with matt chrome scale Fine-adjustment screw for repeatable contact Engineered for large-format workshop measurements This instrument is classified as a large-range caliper (500–1,000 mm), making it suitable where extended reach and stable guidance matter. The 800 mm span covers sizeable components encountered in heavy fabrication, fixture construction and pipe or vessel work, while the monoblock structure reduces flexing along the beam to preserve measurement consistency. The combination of range and profile stiffness aims to shorten setup times and reduce rework by delivering reliable first-pass measurements. Precise readings with clear vernier scales and adjustment The caliper uses dual vernier graduations — 1/128" Vernier on the upper edge for inch-based readings and a 1/20 mm Vernier on the lower edge for metric use — permitting a workshop-standard resolution of 0.05 mm when reading the metric scale. The integrated fine adjustment screw enables controlled closing of the jaws, which helps avoid variable hand pressure and improves repeatability compared with rapid, hand-driven finger slides. Compliance with DIN 862 for the specified jaw geometry (snabellength 200 mm) ensures the measuring faces meet recognised workshop tolerances and handling expectations. Built to take daily workshop use Critical contact surfaces and the beam are made from hardened stainless steel, finished with a matt chrome scale for durable visibility without glare. The caliper is fitted with pointed jaws that aid access into narrow grooves and features robust guidance to withstand the knocks of everyday use. Delivery includes a protective case to simplify transport and storage; the case supports safe handling of the long beam during shipping and prevents damage between uses. These design choices focus on longevity and low lifecycle cost in demanding production environments. Practical handling and application scope As a mechanical vernier caliper, the instrument supports outside, inside and step measurements using the standard jaw geometries and beam graduations; this versatility makes it a reliable workshop tool for machining, assembly and quality control. The analogue nature requires basic vernier-reading skill, but the fine-adjustment mechanism reduces measurement variability and makes repeated checks faster. Metav’s workshop-range selection emphasises accessible precision: longstanding availability from a European distribution centre keeps replenishment predictable and supports continuity at the bench or on the shop floor. For a hands-on specification review or procurement guidance, contact Metav Werkzeuge — the Metav IndustryLine 800 mm workshop caliper is available through Metav’s distribution and our consultants can advise on suitability for specific production tasks. Technical data Article number: M201.338.1 GTIN: 4054469101804 Brand: Metav IndustryLine Category: Calipers / Measuring instruments Facts Measuring range: 0–800 mm Jaw length: 200 mm Scale type: Vernier (upper 1/128", lower 1/20 mm) Beam design: Monoblock Delivery format: Supplied in case Special features Material: Hardened stainless steel Finish: Matt chrome scale Feature: Fine-adjustment screw Jaws: Pointed for narrow access Standard: DIN 862 (applicable jaw length) FAQ What measuring range does the caliper cover? The M201.338.1 workshop caliper covers a measuring span from 0 to 800 mm, designed for large-format workshop tasks and components. How accurate is the instrument for metric readings? Metric readings use the 1/20 mm vernier, corresponding to a workshop resolution of 0.05 mm; the fine-adjustment screw aids reproducible contact for repeatable results with the M201.338.1. Is the caliper suitable for inside and step measurements? Yes — the geometry of the jaws supports outside, inside and step measurements as standard functions of this analogue workshop caliper. What material and finish are used for durability? The M201.338.1 is manufactured from hardened stainless steel with a matt chrome scale to provide wear resistance and glare-free readability in the workshop. Does the delivery include protective packaging? Delivery includes a transport case to protect the long beam during handling and storage, simplifying safe movement between workstations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Caliper Without Point Fine Adjustment Monoblock Hardened Stainless Steel Matt Chrome Scale, DIN 862 - Metav IndustryLine
Take advantage of the combination of monoblock rigidity, fine adjustment and an extended 0–800 mm measuring range to keep large‑component checks both repeatable and efficient; order directly via Metav Werkzeuge or contact our consultants for application advice. Metav IndustryLine Workshop Caliper M201.328.1 — 0–800 mm, monoblock, fine adjustment The Metav IndustryLine Workshop Caliper M201.328.1 is a robust 800 mm analogue caliper designed for heavy workshop measurement tasks, providing a stiff monoblock frame and a precise fine‑adjustment mechanism for reliable long‑range checks. Large 0–800 mm range for sizeable components Hardened stainless steel with matt‑chrome scale Fine adjustment for repeatable contact positioning Delivered in transport case for secure handling Stable measurement over long spans The monoblock construction gives the caliper exceptional stiffness, reducing bending and torsion across the full 0–800 mm range. In practice this means fewer measurement variations when assessing larger parts in machining or fixture set‑ups; the single‑piece beam keeps jaw alignment consistent and simplifies handling during repetitive checks. This model belongs to the large‑range class (500–1,000 mm), a category chosen where profile rigidity and reach are decisive for reproducible results on plates, housings and heavy components. Practical vernier readout and refined control The analogue vernier arrangement combines a top and bottom scale for intuitive readings: the top vernier is 1/128", while the lower vernier gives 1/20 mm graduations (0.05 mm), offering the familiar mechanical resolution used in many workshops. The integrated fine adjustment permits micro‑corrections of jaw position before locking, which reduces operator‑induced scatter and speeds up the alignment process. For everyday industrial use this setup yields the dependable resolution expected from mechanical calipers while avoiding battery dependence. Built for workshop use and secure transport Constructed from hardened stainless steel with a matt‑chrome scale, the caliper resists corrosion and keeps scale contrast readable under harsh lighting or oily conditions. The jaws are supplied without a pointed tip, favouring broad contact faces that tolerate heavier contact forces and particulates; a long jaw length of 200 mm supports stable engagement on larger workpieces. Compliance with DIN 862 is ensured for the specified jaw length, and the instrument is supplied in a protective case for safe transport and storage, reflecting workshop realities where tools move between benches and machines. Request tailored advice from Metav Werkzeuge in Emmerich for integration into production workflows or to clarify suitability for specific large‑component applications Technical Data Article number: M201.328.1 GTIN: 4054469101569 eClass: 21170344 Manufacturer: Metav IndustryLine Facts Measuring range: 0–800 mm Jaw length: 200 mm Resolution (vernier lower): 1/20 mm (0.05 mm) Vernier upper: 1/128" Type: Analogue vernier caliper Special features Material: hardened stainless steel with matt‑chrome scale Monoblock one‑piece beam Fine adjustment mechanism Delivered in transport case Supplied without pointed tip Norm: DIN 862 (applies for jaw length 200 mm) FAQ What measuring range does the caliper cover? The Metav IndustryLine Workshop Caliper M201.328.1 covers a measuring range of 0–800 mm, making it suitable for larger workshop components within the 500–1,000 mm class. What level of resolution and readout is provided? This analogue caliper uses a dual vernier: the lower vernier corresponds to 1/20 mm (0.05 mm) resolution while the upper vernier is 1/128", offering the mechanical graduations commonly used in industrial measurement. How does the fine adjustment improve measurement results? The fine‑adjustment mechanism allows controlled micro‑movement of the jaws before locking, reducing operator pressure variation and improving repeatability when performing serial checks with the caliper. Is the caliper corrosion resistant for workshop environments? Yes, the instrument is made from hardened stainless steel and features a matt‑chrome scale to maintain readability and resist surface corrosion in typical workshop conditions. Does the caliper come protected for transport? The caliper is supplied in a transport case to protect the instrument during storage and movement between workstations Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Caliper Without Probe Fine Adjustment Monoblock Stainless Steel 400mm Jaws 0.05mm Resolution DIN 862 - Metav IndustryLine
Take advantage of a sturdy monoblock design, broad 800 mm measuring range and precise fine adjustment to keep large workshop measurements reproducible and efficient. Order the caliper directly via Metav Werkzeuge or consult our specialists for application-specific advice. Workshop Caliper M201.328.3 — 0–800 mm monoblock stainless steel with fine adjustment (Metav IndustryLine) A Workshop Caliper M201.328.3 engineered for robust, large‑format measurement tasks in workshops and fixture construction, combining a wide 0–800 mm range with a controlled fine‑adjustment mechanism for repeatable results 800 mm measuring range Monoblock stainless steel construction Fine adjustment for controlled positioning Vernier for mm and inch reading Built for reliable large‑format measurement The caliper’s monoblock construction delivers higher torsional rigidity than split‑beam designs, which reduces deflection during repetitive measurements and helps maintain reproducibility across long series. With an 800 mm measuring range and a 400 mm jaw length, this instrument covers the typical needs of heavy workshop tasks such as fixture, mould and medium‑sized housing inspection. The combination of range and stiffness shortens set‑up time and reduces the need for repeated checks, supporting a smoother production flow. Industrial standard accuracy made easy to read Equipped with a dual vernier, the bottom scale is graduated as 1/20 mm (equivalent to 0.05 mm), while the top vernier provides inch reading at 1/128". This configuration corresponds to the industrial standard for analogue calipers and enables clear cross‑reference between metric and imperial workflows. The vernier scale requires no electronics, which simplifies maintenance and ensures immediate availability on the workshop floor; users benefit from fast visual comparison and a measurable error band that sits within common DIN guidelines for mechanical calipers. Robust materials and a worked finish for daily use Manufactured from hardened stainless steel with a matt‑chromed scale, the instrument resists corrosion and keeps scale markings legible under workshop conditions. The fine‑adjustment screw provides controlled traverse of the slider for careful positioning when setting jaws on critical edges, reducing measurement scatter due to hand pressure. The caliper is supplied in a transport case (plastic or wooden as required for safe shipping); for larger tools the wooden variant is intended primarily for transport rather than daily storage. Standards conformity and workshop integration The product meets established norm references: DIN 862 applies for jaw lengths up to 200 mm; for larger jaw lengths the instrument is supplied according to factory standard to maintain the required stability for long jaws — in this case the 400 mm jaw length is produced to the manufacturer’s specification. This makes the caliper suitable for integration into workshop quality routines where consistency and traceability are important. If system compatibility or fixture‑level tolerances need discussion, Metav Werkzeuge can advise on adapting measurement procedures to existing quality workflows. For robust large‑format measurement rely on the Metav IndustryLine workshop caliper — contact Metav Werkzeuge for application guidance and supply direct from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M201.328.3 GTIN: 4054469101583 Manufacturer: Metav IndustryLine Facts Measuring range: 0–800 mm Jaw length: 400 mm Vernier: 1/20 mm (0.05 mm) and 1/128" Category: Caliper (large range) Tariff code: 90173000 Special features Material: hardened stainless steel, matt‑chromed scale Design: monoblock construction Adjustment: fine adjustment screw Type: analogue vernier caliper Delivery: transport case (plastic or wooden as appropriate) Norms: DIN 862 (up to 200 mm jaw length), factory norm for larger jaws FAQ How accurate is the measurement with this caliper? The caliper achieves vernier resolution of 1/20 mm, equivalent to 0.05 mm, which aligns with the typical industrial standard for analogue calipers and is suitable for workshop quality control with clearly reproducible results. Is this instrument suitable for large workshop components? Yes. The Workshop Caliper M201.328.3 is a large‑range caliper (0–800 mm) with a 400 mm jaw length and a monoblock design, intended for robust measurement tasks in fixture, mould and general workshop use. What material and finish does the caliper have? The caliper is made from hardened stainless steel and features a matt‑chromed scale, offering corrosion resistance and long‑term legibility of graduations. How is the caliper delivered for transport? This caliper is supplied in a transport case — plastic or wooden depending on shipping requirements — with larger wooden cases used primarily to protect the instrument during transport. Does the caliper comply with recognised standards? The instrument follows DIN 862 for jaw lengths up to 200 mm; for the 400 mm jaw length of this model, production follows the manufacturer’s factory standard to ensure rigidity and repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Caliper Without Probe Fine Adjustment, Hardened Stainless Steel, 0.02mm Resolution - Metav IndustryLine
Take advantage of the 800 mm measuring range, the 0.02 mm graduation and the robust monoblock stainless construction to measure large components reliably; order directly via Metav Werkzeuge or ask the Metav consultants for application advice. M201.318 Workshop Caliper — 800 mm range, 0.02 mm graduation, Metav IndustryLine The M201.318 workshop caliper without tip is a large-format vernier caliper developed for heavy-duty workshop measurement of assemblies, fixtures and large housings, offering a precise analogue scale and fine-adjustment for controlled positioning. 800 mm measuring range for large components Hardened stainless steel with matt-chrome scale Fine-adjustment screw for precise positioning Designed for outside, inside and step measuring Engineered for large-format workshop measurement The long measuring span and monoblock construction make this caliper a practical choice where reach and stiffness matter. With an 800 mm range, the instrument belongs to the class for large components and long bars, which keeps deflection low across the measuring length. The large format supports efficient inspection of welded frames, housings and bulky parts while preserving a usable degree of stiffness for repeatable results. Analogue vernier for decisive, reliable readings A classic vernier scale remains a dependable solution in many workshops: the lower vernier provides a 0.02 mm graduation for industrial work, while the dual-scale layout gives clear comparison between metric and imperial increments. The fine-adjustment screw enables careful closure of the jaws before taking a reading, reducing operator-induced error and speeding up repetitive measurements without compromising accuracy. Robust materials and finishing for everyday use Constructed from hardened stainless steel with a matt-chrome scale, the caliper resists corrosion and maintains legibility under workshop conditions. The hardened surfaces stand up to mechanical wear, and the matt finish reduces distracting reflections in bright production lighting. The solid construction supports durability in a busy environment and lowers the need for frequent replacements. Practical handling that supports workshop workflow The instrument is configured for outside, inside and step measuring, covering the four core measuring tasks commonly required on the shop floor. The absence of a pointed tip simplifies contact with flat faces and delicate surfaces, while the jaw geometry and 150 mm jaw length enable access to deeper pockets and recesses. As an analogue tool, it is straightforward to integrate into existing inspection routines and does not rely on batteries or electronics. For tailored advice on integrating the M201.318 caliper into production or for direct supply from Emmerich, contact Metav Werkzeuge GmbH by e-mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav consultants will recommend the right configuration for the task. Technical data Article number: M201.318 GTIN: 4054469101378 ECLASS: 21170344 Tariff number: 90173000 Facts Measuring range: 0–800 mm Resolution / Graduation: 0.02 mm Jaw length: 150 mm Scale type: analogue vernier Special features Hardened stainless steel with matt-chrome scale Monoblock construction Fine-adjustment screw Suitable for outside, inside and step measuring Werksnorm (factory standard) FAQ What measuring tasks can this caliper perform? The M201.318 workshop caliper handles outside, inside and step measuring; its jaw geometry and long range make it suitable for large-format workshop tasks. Is the scale metric or imperial? The vernier layout on the instrument provides metric graduation (0.02 mm) alongside an imperial scale reference for cross-checking. How does the fine-adjustment improve measurement? The integrated fine-adjustment screw enables controlled, smooth jaw movement for repeatable positioning and reduced operator influence during reading. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Caliper Without Tip 0.05mm, 300mm Jaw, Fine Adjustment, Monoblock, Stainless Hardened Chrome Scale, in Case - Metav IndustryLine
Take advantage of robust long‑range measurement, corrosion‑resistant construction and precise fine adjustment for dependable workshop performance; order the caliper directly via Metav Werkzeuge or ask the consultants for application advice. M201.328.2 — Workshop vernier caliper, 0–800 mm, stainless, fine adjustment (Metav IndustryLine) M201.328.2 is a workshop vernier caliper engineered for long‑reach external, internal and step measurements in heavy‑duty machine‑shop environments. 0–800 mm measuring range for large components Hardened stainless steel with matt‑chromed scale Fine‑adjustment spindle for precise positioning Monoblock design for increased rigidity Accurate long‑reach measurement for heavy assemblies Designed as a large‑range (500–1,000 mm) caliper, this instrument provides a practical balance between reach and stiffness, making it suitable for larger fixtures, housings and machining set‑ups. The 0–800 mm measuring span and extended jaw length of 300 mm enable access into deep bores and across wide faces without multiple gauge changes, reducing cycle time and handling. The mechanical Vernier is configured for a reading step of 0.05 mm, aligning with industrial workshop practice for repeatable checks and quick visual verification. Robust construction that withstands workshop demands The frame and measuring faces are made from hardened stainless steel, finished with a matt‑chromed scale to resist corrosion and minimise glare under workshop lighting. The monoblock construction increases profile rigidity across the full bar length, which improves reproducibility of measurements on heavy components; the tool’s mass (approx. 8.5 kg) reflects the substantial build and should be considered when planning handling or storage. A fine‑adjustment spindle permits micro‑positioning of the slider for confident setting of measurement points and comparison checks. Standards, handling and usability in daily inspection routines Calibration and traceability follow the specified norm: conformity to DIN 862 is provided for shorter jaw variants, while calipers with larger spans are produced to the manufacturer’s factory standard, ensuring consistent quality across sizes. The dual vernier arrangement (upper scale 1/128‑inch, lower scale 1/20 mm) supports mixed‑unit reading where imperial and metric references coexist in workshop documentation. The overall layout prioritises quick manual use and clear scale reading, making the instrument effective for routine production checks and first‑article inspections. For reliable large‑range measurement capacity and workshop durability, contact Metav Werkzeuge to discuss how the M201.328.2 fits specific applications and to arrange procurement through Metav Werkzeuge. Technical data Article number: M201.328.2 GTIN: 4054469101576 Category: Messschieber / Caliper Facts Measuring range: 0–800 mm Jaw length: 300 mm Resolution: 0.05 mm (vernier) Weight: 8.5 kg Measuring system: Analog vernier (mechanical) Special features Hardened stainless steel construction Matt‑chromed scale for improved legibility Fine‑adjustment spindle for precise setting Monoblock design for increased rigidity Conforms to DIN 862 for smaller jaws; larger spans to factory standard FAQ What measurement range does this caliper cover? The M201.328.2 covers a measuring range of 0–800 mm, designed for large‑component checks in workshop and production environments. Is the scale corrosion‑resistant for shop use? Yes, the M201.328.2 is made from hardened stainless steel with a matt‑chromed scale to withstand workshop conditions and maintain legibility. How precise is the reading on this analogue caliper? The vernier arrangement provides a reading step of 0.05 mm, a standard industrial resolution for mechanical calipers used in routine inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Workshop Precision Caliper With Pointed Jaws, Fine Adjustment, Monoblock, 0.05mm Resolution, Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of hardened stainless-steel construction, an 800 mm measuring range and a fine-adjustment spindle for dependable, repeatable measurements in heavy workshop environments; order the caliper directly via Metav Werkzeuge or consult the technical team for specification support. Workshop caliper with pointed jaws — Monoblock, 800 mm measuring range, 0.05 mm resolution (Metav IndustryLine) The Workshop caliper with pointed jaws is a robust analogue measuring instrument designed for large-format component measurement in industrial workshops and toolrooms. Hardened stainless-steel construction 800 mm measuring range Fine-adjustment spindle for precise setting Supplied in a protective transport case Large-range accuracy for heavy-duty workshop tasks With a measuring range of 800 mm, this instrument is classified among large-format calipers, intended for long-beam measurement tasks such as frame components, housings and larger fixtures. The combination of a long reach and a monoblock design reduces torsion and bending over the beam, supporting stable repeatability when measuring extended parts. The analogue vernier layout with a 0.05 mm increment aligns with common workshop tolerances and provides a clear, mechanical reference that is easy to read under varied lighting conditions. Durable construction and precise adjustment for consistent results The caliper is manufactured from hardened stainless steel with a matt-chromed scale, giving corrosion resistance and a low-reflectance surface for improved legibility. A fine-adjustment spindle enables accurate approach and locking of the jaws, turning coarse positioning into controlled measurement steps; this reduces user-induced error during clamping. The instrument features pointed jaws for access to small grooves or narrow seats and a monoblock jaw assembly to maintain parallelism and robustness across repeated use. The vernier specification is provided as 1/128" (top) and 1/20 mm (bottom), offering a dual-scale reference for workshops that still use imperial readings alongside metric. Practical workshop logistics and standards compliance Designed for routine industrial use, the caliper is supplied in a protective transport case, facilitating safe storage and transport between workstations. The analogue system is straightforward to maintain and does not require batteries, which simplifies long-term operation in busy production environments. Where applicable, jaw-length and manufacturing tolerances follow DIN 862 conventions for shorter jaw lengths; for larger jaw configurations, factory standards apply to ensure structural integrity. The robust build and clear scale mean the instrument performs best where coarse-to-medium precision is sufficient across large parts, striking a balance between reach and ease of handling. For large-component measurement tasks, choose the Metav IndustryLine workshop caliper — contact Metav Werkzeuge in Emmerich for ordering details or to request further technical specifications. Technical data Article number: M201.338 GTIN: 4054469101798 eClass: 21170344 Facts Measuring range: 0–800 mm Jaw length: 150 mm Resolution: 0.05 mm Nonius/vernier: 1/128" (top) and 1/20 mm (bottom) Customs tariff number: 90173000 Special features Material: hardened stainless steel with matt-chromed scale Monoblock construction Fine-adjustment spindle Pointed jaws for narrow features Supplied in a protective transport case Analogue vernier instrument Conforms to DIN 862 for specified jaw lengths FAQ What measuring range does this caliper cover? The workshop caliper covers a measuring range from 0 to 800 mm, making it suitable for large-format components and long-beam measurements. What level of resolution and precision is provided? The instrument provides a resolution of 0.05 mm via an analogue vernier, matching common workshop tolerances for machining and assembly tasks. Which materials and finishes are used in the caliper's construction? The caliper is made from hardened stainless steel and features a matt-chromed scale for corrosion resistance and reduced glare. Is the caliper supplied with a protective case? Yes, the caliper is delivered in a protective transport case to facilitate safe handling and storage. Does the instrument comply with any standards? Jaw lengths and dimensional tolerances follow DIN 862 for the specified shorter jaw lengths; larger jaw configurations are manufactured to the supplier's factory standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
USB Foot Switch for USB Interface - Metav IndustryLine
Take advantage of seamless measurement control and reliable workshop use: the compact Footswitch for USB interface provides straightforward data capture and stable operation with precision instruments; order directly via Metav Werkzeuge or request advice from our consultants for integration with existing equipment. Footswitch for USB interface – momentary control pedal for data capture The Footswitch for USB interface is a compact control pedal designed to trigger measurement capture via the USB interface M909.686, ideal for use alongside precision calipers and other bench‑top metrology gear in workshop and inspection environments. Compatible with USB interface M909.686 Sturdy pedal for industrial use Plug-and-play operation via USB Non-slip base for secure positioning Integrates measurement workflows for faster data capture The pedal provides a simple, repeatable way to record readings from calipers and other instruments that use a USB interface, reducing hand‑to‑hand interruptions and improving cycle times. With direct compatibility with the USB interface M909.686, the control pedal converts a foot action into an immediate, single‑function input for measurement transfer; this keeps the operator’s hands free for repositioning or fixturing and supports a steady, efficient workflow in production and quality control. The result is smoother process integration and fewer entry errors during high‑volume checks. Built for dependable workshop operation and repeatability A mechanical design focused on robustness and repeatability ensures consistent actuation under frequent use in industrial environments. The pedal’s non-slip base secures placement on workbenches and prevents movement during operation, which helps maintain measurement consistency over long shifts. This stability, combined with straightforward hardware compatibility, contributes directly to reproducible measurement routines and reduces downtime caused by handling interruptions. Simple installation and clear functional purpose Installation is intentionally minimal: the pedal functions as a dedicated input device for a paired USB interface and requires no special drivers for standard setups, offering a plug-and-play experience in many environments. The clear, singular function of the control pedal makes it easy to integrate into existing procedures for precision calipers and other USB‑enabled measuring tools, keeping operator training brief while preserving process control and documentation disciplines. Contact Metav Werkzeuge to confirm compatibility with existing instruments and to request the M909.687 for direct delivery from Emmerich; technical consultants are available for integration guidance Technical data Article number: M909.687 Product: Footswitch for USB interface Compatible with: USB interface M909.686 Manufacturer: Metav IndustryLine Core technical data Weight: not specified Dimensions: not specified Electrical specification: not specified Special features Function: momentary foot switch for measurement/data capture Application: for use with precision calipers and USB measurement interfaces Asset: m909687-main.jpg (image file available) FAQ How is the footswitch connected to measurement equipment? The footswitch connects via the paired USB interface M909.686 and acts as a momentary input to transfer or register measurements from compatible devices. Can the pedal be used with standard precision calipers? Yes. When combined with the appropriate USB interface, the pedal supports typical precision caliper workflows for hands‑free measurement capture. Is any special software required to use the footswitch? In most setups the pedal functions as a simple input through the USB interface M909.686; specific software requirements depend on the measuring device and the data capture application. What environments is the footswitch suitable for? The product is intended for workshop and inspection areas where repeatable, hands‑free measurement entry improves efficiency and safety. Which SKU identifies this footswitch? The product is supplied as SKU M909.687 and is listed under the Metav IndustryLine range for measurement accessories. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
USB Interface for Carbon Workshop Caliper, Compatible with M910.342–M910.353 - Metav IndustryLine
Streamline measurement workflows with the combination of fast digital data transfer and seamless compatibility with Metav carbon calipers. The USB interface converts caliper readings into a direct digital stream, reducing transcription errors and accelerating documentation. Order the accessory directly via Metav Werkzeuge or consult the Metav team for application advice. USB Interface for Carbon Workshop Calipers M909.686 — direct USB connection, compatible with M910.342–M910.353 (Metav IndustryLine) The USB Interface for Carbon Workshop Calipers provides a compact bridge between workshop calipers and digital systems, designed to simplify data capture in production and quality control environments. Direct digital connection to measurement systems Compatible with M910.342–M910.353 calipers Compact format for workshop integration Reduces manual transcription and recording time Faster, more reliable measurement capture for production A direct digital connection removes manual transcription from the measurement loop, delivering consistent results and faster documentation. The USB interface converts analogue caliper signals into a digital data stream that can be imported into spreadsheets and quality software, improving data integrity and enabling quicker decision-making on the shop floor. This leads to measurable time savings in routine inspection tasks and a lower risk of human error. Integrates with existing data workflows and QA systems Designed to fit into current measurement procedures, the adapter supports direct logging and straightforward data handling. By enabling direct data logging into standard applications, the interface simplifies traceability and archiving of measurement results. The reduced administrative overhead supports leaner processes and a clearer audit trail for quality assurance, helping teams maintain consistent production standards. Practical compatibility and workshop suitability Compatibility is specified for Carbon workshop calipers M910.342–M910.353, ensuring immediate interoperability with those models. The interface is intended as a functional accessory for the measurement toolchain, enabling fast transfer of readings to a PC or data-collection device. Clear compatibility reduces integration effort and avoids unexpected adaptation work during commissioning. Built for usability and dependable supply The solution emphasises practical usability: simple connections, predictable data export and a discrete form factor that does not intrude on routine measurement tasks. Sourcing through Metav IndustryLine offers the reassurance of a European distribution and quality filter located in Emmerich, where product checks and logistics are coordinated to support reliable delivery into the workshop environment. For measurement setups that demand efficient digital capture, consider the Metav IndustryLine USB Interface M909.686 — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M909.686 Name: USB Interface for Carbon Workshop Calipers Compatible with: Carbon workshop calipers M910.342–M910.353 Manufacturer: Metav IndustryLine Facts Interface: USB SKU: M909.686 Special features Digital connection for calipers Compact accessory for workshop use FAQ Is the interface compatible with other caliper models? Compatibility is specified for the Carbon workshop calipers M910.342–M910.353; use with other models may require verification of signal compatibility. How are readings transferred to a computer? Readings are transmitted via the USB connection as a digital data stream suitable for import into measurement software or spreadsheets. Does the USB interface affect caliper calibration? The interface does not change the calibration status of the caliper. Calibration remains a property of the measuring instrument and must be maintained according to the caliper manufacturer’s guidance. Which software is required to receive the data? The interface supplies standard digital output; many measurement and data-logging programmes or spreadsheet applications accept this input. Specific software compatibility should be checked with the intended system. What is the article number and who supplies the product? The article number is M909.686 and the product is supplied under the Metav IndustryLine brand. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Wireless Transmitter For Carbon Workshop Calipers Compatible With M910.342–M910.353 - Metav IndustryLine
Take advantage of reliable wireless data transfer and straightforward compatibility with Carbon workshop calipers M910.342–M910.353 to remove manual entry and speed up inspection cycles; the compact design keeps the measuring jaws unobstructed while enabling a continuous digital workflow. Order or enquire via Metav Werkzeuge for fast dispatch and expert advice. Wireless Transmitter M910.039 — Wireless data module for workshop calipers (Metav IndustryLine) Wireless Transmitter M910.039 is a compact data module that links compatible carbon workshop calipers to digital measuring systems for streamlined data collection and reduced transcription errors Compact wireless module for workshop calipers Plug-and-play data transfer to measuring systems Compatible with Carbon workshop calipers M910.342–M910.353 Low-profile form that preserves measurement access Speed up measurement workflows with secure wireless transfer The M910.039 enables fast, machine-readable data capture from compatible calipers, eliminating repetitive manual recording and the associated sources of human error. By providing wireless data transfer from the measuring instrument to compatible receivers and software, the module shortens inspection loops and supports a more efficient production rhythm. This results in measurable time savings during batch checks and quality control, while maintaining the traceability expected in modern workshops. Improve traceability and quality control without extra complexity Integration of a transmitter offers clear benefits for documentation and auditability: recorded values can be routed directly into measurement logs and digital reports, improving traceability and reducing rework caused by transcription mistakes. The low-profile design preserves full access to the caliper jaws during routine tasks, so measuring performance is not compromised. The module is intended as a practical addition for workshop environments that demand consistent, verifiable data flow rather than manual note-taking. Simple compatibility and workshop-ready reliability Designed as an accessory for the Carbon workshop calipers M910.342–M910.353, the transmitter supports straightforward attachment and operation alongside standard measuring procedures. As a product from Metav IndustryLine, it benefits from distribution and quality control processes centred in Emmerich, ensuring reliable stocking and supply for industrial customers and independent workshops. For procurement or specification checks, the module can be ordered via Metav Werkzeuge or assessed with the sales documentation available from the supplier. For enquiries about fitting the Metav IndustryLine M910.039 or to confirm system compatibility, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com or +49 2822 7131930 — for tailored advice and prompt dispatch Technical data Article number: M910.039 Name: Wireless transmitter Label: Drahtloser Sender Compatible with: Carbon workshop calipers M910.342–M910.353 Brand: Metav IndustryLine Facts Image file size: 54310 bytes Image count: 1 Special features Wireless transmitter function indicated by product name Digital data output interface (as accessory for calipers) Product image available via asset FAQ What calipers is this transmitter compatible with? The transmitter is compatible with Carbon workshop calipers M910.342–M910.353 and is designed to work as an accessory to those models for wireless data transfer. Will the transmitter affect the measuring accuracy of the caliper? The transmitter itself serves only to relay measurement values; it does not alter the mechanical measuring function of the caliper. Accuracy remains defined by the caliper’s specifications. Is any special software required to receive the data? Data reception depends on the chosen receiver or measuring software; the transmitter provides a digital output for integration with compatible systems and data loggers. Can the transmitter be fitted and removed during routine work? The transmitter is intended as an add-on accessory for workshop use and can be fitted to the compatible caliper models to support standard measuring sequences. Does the transmitter replace manual documentation processes? When connected to a compatible receiving system, the transmitter enables automatic capture of measured values, reducing the need for manual documentation and lowering the risk of transcription errors. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision measurement for heavy components with workshop calipers
Workshop calipers, also described as heavy-duty calipers or industrial vernier calipers, are engineered for exact external and internal measurement on large workpieces. Designed for shipbuilding, rail vehicle manufacture and heavy plant assembly, these calipers deliver stable, repeatable readings even across extreme spans up to 10,000 mm (10 metres).
How these calipers perform in industrial practice
Built with an extremely distortion-free frame of hardened or weight-optimised special steel, workshop calipers maintain alignment across long reaches and heavy contact forces. They measure shafts, flanges and housings by combining robust jaws with optional measuring-force-limiting systems, fine micrometric slider adjustment and rounded internal measuring faces to reduce damage and measurement error. Available in analogue form with a fine vernier scale or as a digital variant with data output for direct integration into quality assurance systems.
Practical advantages that improve production
- Proven metrological stability for large components thanks to distortion-free construction.
- Hands-on ergonomics through measuring-force-limiting and precision fine adjustment, reducing operator error.
- Flexible data handling with digital data output for seamless quality documentation.
- Materials and design that withstand heavy workshop environments: hardened special steel or weight-optimised alternatives.
- Measurement range scalability up to 10,000 mm (10 metres) for XXL applications.
Why Metav is the sensible partner for these tools
Metav stands for the democratisation of precision and acts as a quality filter for the European market from its base in Emmerich. With over 48,000 customers and a portfolio exceeding 250,000 products, Metav combines long-standing expertise with a comprehensive range that simplifies procurement for industry and trade. In the field of workshop calipers, Metav’s assortment is positioned as the optimal choice, offering both analogue vernier solutions and modern digital models suitable for integration into industrial measurement workflows.
Core takeaway
For reliable dimensional control of oversized components, workshop calipers deliver measurable gains in repeatability, ergonomics and process integration—making them indispensable in heavy industry.
FAQ
What measuring ranges are available for workshop calipers?
Workshop calipers are offered for extreme tasks, with models covering spans up to 10,000 mm (10 metres) to accommodate large shafts, flanges and housings.
Can these calipers connect to quality assurance systems?
Yes. Many industrial vernier calipers are available with digital data output, enabling direct transfer of measurement values into QA systems for traceable documentation.
Which design features reduce operator-induced error?
Features such as a measuring-force-limiting system, a precise fine-adjustment mechanism and rounded internal measuring faces reduce variability and the risk of damaging components during measurement.
What materials ensure long-term stability for large-scale measurement?
Metav’s workshop calipers use hardened special steel or weight-optimised variants to ensure minimal distortion and lasting dimensional stability even under heavy use.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com