Heavy-duty workshop verniers for large components
Our heavy-duty workshop verniers provide precise external and internal measurement of massive workpieces such as large shafts, flanges and housings, delivering stability and repeatable results even across spans up to 10,000 mm. Designed for the demands of heavy industry, shipbuilding and rail vehicle manufacture, they combine a distortion‑resistant construction in hardened or weight‑optimised special steel with ergonomic features like force‑limited measuring systems and fine adjustment for exact slide movement. Available in analogue versions with fine vernier scales or digital variants with data outputs for quality assurance integration, these calipers ensure reliable dimensional control in XXL machining.
500mm Workshop Caliper With Pointed Jaws, Fine Adjustment, Monoblock, 0.05mm Graduation, Supplied In Case - Metav IndustryLine
Take advantage of the combination of robust monoblock construction, fine-adjustment setting and a 500 mm measuring range for reproducible workshop measurements; order the workshop caliper directly via Metav Werkzeuge or ask our consultants if needed. M201.335.2 Workshop Vernier Caliper — 500 mm range, hardened stainless steel The M201.335.2 Workshop Vernier Caliper is a heavy‑duty monoblock caliper designed for medium‑format measuring tasks in production and maintenance environments, offering fine adjustment and pointed jaws for precision work. 500 mm measuring range Hardened stainless steel construction Fine-adjustment thumbwheel for precise setting Monoblock profile for high stiffness Consistent accuracy for shop-floor control The analogue vernier design provides a clear 0.05 mm resolution (bottom scale) and an additional inch scale at 1/128" (top), which supports mixed‑unit workflows without compromise. The hardened stainless steel beam and matt‑chromed scale minimise wear and glare, while the fine‑adjustment thumbwheel allows reproducible closure of the jaws during repetitive checks. Together these features reduce measurement scatter and rework, delivering reliable dimensional control for metalworking and fixture assembly. The right size for everyday machining tasks With a measuring span up to 500 mm, this instrument is classified as a medium caliper in workshop practice — offering the best balance between reach and rigidity for components such as housings, mounts and larger subassemblies. The 250 mm jaw length increases contact area on longer profiles, helping to maintain alignment during external measurements and improving stability when measuring larger faces compared with shorter‑jaw models. Built to withstand workshop conditions The single‑piece monoblock design enhances profile stiffness and reduces torsion during handling, which is crucial when measuring on machines or in fixtures. Pointed jaw tips permit access to reduced features and grooves, while the hardened material resists knocks and abrasion. The instrument’s vernier layout follows recognised metrology practice and is marked to the norm indicated, ensuring compatibility with standard inspection routines in industrial environments. Practical operation and traceable conformity This vernier caliper features an intuitive mechanical nonius with both metric and imperial readouts, plus a fine‑adjustment mechanism for careful positioning without over‑tightening. The product is supplied according to the stated norm guidance: DIN 862 applies for shorter jaw lengths; for the 250 mm jaw length the caliper is produced to the manufacturer's standard. Such conformity supports straightforward integration into existing quality workflows and documentation routines. Contact Metav Werkzeuge today to discuss suitability for specific applications or to request further technical details — Metav Werkzeuge provides expert advice from Emmerich and can be reached at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M201.335.2 GTIN: 4054469101750 Manufacturer: Metav IndustryLine Facts Measuring range: 0–500 mm Jaw length: 250 mm Resolution: 0.05 mm (bottom), 1/128" (top) Scale finish: matt-chromed Type: analogue vernier caliper Special features Monoblock design Fine-adjustment thumbwheel Hardened stainless steel material Pointed jaw tips Complies with DIN 862 (see note on jaw length) FAQ What measuring range does this caliper cover? The M201.335.2 workshop vernier caliper covers a measuring range of 0–500 mm, making it suitable for medium‑format workshop measurements. What resolution and readouts are available? The instrument provides a metric resolution of 0.05 mm on the lower vernier and an imperial readout of 1/128" on the upper scale, as specified for the M201.335.2 caliper. Is the caliper suitable for heavy workshop use? Yes; the M201.335.2 features a monoblock profile and hardened stainless steel construction designed for robust shop‑floor handling. How does the fine‑adjustment help during measurement? The fine‑adjustment thumbwheel permits controlled closing of the jaws for repeatable contact pressure and reduced operator influence on readings when using the M201.335.2. Which standards govern this instrument? The caliper is produced with reference to DIN 862; for the 250 mm jaw length the instrument is supplied to the manufacturer's standard as indicated. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Workshop Caliper Without Jaw Tip For External, Internal And Step Measurement, 0.02mm Scale, Fine Adjustment, Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of a robust hardened stainless steel construction and a 0–500 mm measuring range to bridge bench work and larger assembly checks with consistent repeatability; the built‑in fine‑adjustment screw and precise vernier reading ensure reliable, reproducible results across external, internal and step measurements. Order the M201.315 directly via Metav Werkzeuge or consult our specialists for specification matching. M201.315 Workshop Caliper — analogue vernier, 0–500 mm, 0.02 mm The M201.315 is an analogue workshop caliper designed for medium‑range measuring tasks in metalworking and assembly environments, suitable for external, internal and step measurements where mechanical stability and readable precision are essential. Hardened stainless steel with matt‑chrome scale Precise vernier: 1/50 mm (0.02 mm) resolution Fine‑adjustment screw for gentle, exact closing Delivered in a transport case for safe handling Reliable medium‑range performance for workshop workflows This caliper covers a 0–500 mm measuring span, placing it in the medium category that balances reach and stiffness for everyday machine‑shop use. The monoblock construction reduces flex and improves repeatability when measuring larger fixtures, housings or workpieces compared with shorter, less rigid tools. The hardened stainless steel body and matt‑chrome scale resist wear and reduce reflection under bright workshop lighting, so the scale remains legible over long service intervals. These characteristics translate directly into fewer rechecks and more consistent production throughput. Readable, mechanical accuracy without electronics As an analogue vernier instrument, this caliper provides a tactile, battery‑free measurement method appreciated for its reliability in harsh or oil‑contaminated environments. The vernier system offers a 1/50 mm (0.02 mm) reading step on the metric scale and an imperial scale of 1/1000 inch for cross‑reference; this combination supports mixed‑unit documentation without the need for conversion tools. The tool conforms to the factory Werksnorm, giving a predictable baseline for in‑house quality procedures and routine checks, while the fine resolution suits careful workshop quality control where mechanical accuracy is expected. Designed for precise handling in daily use Ergonomics and fine control are central to the caliper’s design: a dedicated fine‑adjustment screw makes incremental closing smooth and prevents overshoot when setting jaws on delicate surfaces. The 150 mm jaw length provides ample contact area for stable external measurements, while the slender jaw tips allow confident internal and step measurements. Supplied in a dedicated transport case, the instrument is protected during storage and transit, reducing the risk of shock or corrosion that can compromise a workshop’s measurement standard. For teams standardising measurement tools across benches, this caliper offers straightforward handling and consistent results. Built for durability and practical workshop standards The combination of a hardened stainless steel frame, matt‑chrome graduation and monoblock design keeps maintenance demands low and service life high, supporting continuous shop use. The caliper’s capability for external, internal and step measurement consolidates three common functions in one robust instrument, reducing tool changes and saving time between operations. Supplied under the Werksnorm production standard and distributed through Metav IndustryLine, the instrument suits workshops that require dependable, no‑frills measuring equipment that performs under daily service conditions. Contact Metav Werkzeuge today to discuss specification matching, ordering and delivery of the Metav IndustryLine M201.315 workshop caliper, supplied with transport case and factory standard documentation. Technical Data Article number: M201.315 GTIN: 4054469101347 Brand: Metav IndustryLine Type: Analogue vernier caliper Facts Measuring range: 0–500 mm Resolution: 0.02 mm Vernier scales: 1/50 mm and 1/1000 inch Jaw length: 150 mm Tariff number: 90173000 Special features Material: stainless steel, hardened; matt‑chrome scale Monoblock construction Fine‑adjustment screw Suitable for external, internal and step measurements Delivery in transport case Factory standard: Werksnorm FAQ How precise is the caliper for workshop checks? The M201.315 provides a mechanical reading step of 0.02 mm via its vernier scale (1/50 mm), placing it in the high‑precision bracket for analogue calipers used in machine‑shop quality checks. Can the caliper measure internal and step dimensions as well as external ones? Yes; the design supports external, internal and step measurements, making the tool versatile for common workshop tasks without the need for multiple instruments. Is the instrument supplied ready for use or does it require initial calibration? The instrument is supplied to Werksnorm (factory standard). If a specific accredited calibration certificate is required, please discuss options with Metav Werkzeuge prior to purchase. What makes the caliper suitable for daily shop use? Durable hardened stainless steel, a monoblock frame and a fine‑adjustment screw combine to deliver stable, repeatable contact and easy handling under routine workshop conditions. Does the delivery include protection for transport and storage? The caliper is supplied in a dedicated transport case, which protects the measuring faces and scale during shipment and storage, reducing the risk of damage and preserving accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Workshop Caliper Without Point 250mm Jaws 0.05mm Vernier Fine Adjustment Monoblock Stainless Steel Matt Chrome Scale, in Case - Metav IndustryLine
Take advantage of the combination of robust monoblock construction, precise fine adjustment and a 0–500 mm measuring range for reliable workshop measurement tasks; order the caliper directly via Metav Werkzeuge or consult the team for application advice. Workshop Vernier Caliper M201.325.2 — 0–500 mm range, hardened stainless steel (Metav IndustryLine) The Workshop Vernier Caliper M201.325.2 is an analogue caliper intended for medium‑range workshop measurements up to 500 mm, offering a rigid monoblock design and a fine‑adjustment mechanism for controlled, repeatable readings. Hardened stainless steel construction 0–500 mm measuring range Fine‑adjustment thumb screw Monoblock for high rigidity Reliable accuracy for everyday workshop control Built for frequent use, this analogue caliper combines a monoblock frame with hardened stainless steel to limit flex and wear during repeated handling. The vernier arrangement provides a clear 0.05 mm resolution, which aligns with common workshop tolerances and supports reliable go/no‑go decisions on the production floor. The fine adjustment ensures the jaws close smoothly, reducing overshoot and operator‑induced error; this makes the instrument particularly suitable where steady, reproducible contact is required without resorting to electronic instruments. Medium‑range capability for larger assemblies Classified in the Medium category (measuring range 300–500 mm), the caliper bridges the gap between compact gauges and long‑reach instruments. The 0–500 mm span and jaw length 250 mm allow secure contact on larger fixtures, housings and assemblies while keeping handling manageable for a single operator. Conformity to DIN 862 is observed for shorter jaw variants, and for the longer jaw geometry this unit is manufactured to the works standard to preserve reliable measuring characteristics across the full range. Practical features that speed daily workflows The analogue vernier includes a dual reading arrangement (top and bottom scales) that supports imperial and metric cross‑checks in workshops that still reference both systems. The matt‑chrome scale reduces glare under workshop lighting and supports fast reading, while the sturdy thumb screw fine‑adjustment offers micro‑control during closing and setting operations—translating directly into fewer remeasures and faster cycle times. The overall design prioritises robustness and serviceability, making it a pragmatic choice for production, maintenance and jobbing shops where straightforward, dependable measurement is required. Discuss the Metav IndustryLine caliper with Metav Werkzeuge for tailored advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M201.325.2 GTIN: 4054469101514 Brand: Metav IndustryLine Facts Measuring range: 0–500 mm Resolution: 0.05 mm Jaw length: 250 mm Vernier: 1/128" top; 1/20 mm bottom Special features Material: hardened stainless steel with matt‑chrome scale Monoblock construction Fine‑adjustment thumb screw Compliance: DIN 862 up to 200 mm; from 250 mm according to works standard Analogue vernier caliper for workshop use FAQ What measuring range does the caliper cover? The M201.325.2 caliper covers a 0–500 mm measuring range, placing it in the Medium category for workshop use. What resolution and reading increment does the instrument offer? Resolution is 0.05 mm, provided by the analogue vernier arrangement with dual scales for practical workshop readings. Is the caliper suitable for heavy everyday use? Yes. The monoblock construction and hardened stainless steel material are specified to withstand routine workshop handling and maintain dimensional stability. Does the caliper comply with recognised standards? The design follows DIN 862 for shorter jaw lengths; for the longer jaw geometry of this model, production is carried out to the manufacturer’s works standard to ensure consistent behaviour across the full range. How is fine positioning achieved during measurement? A dedicated fine‑adjustment thumb screw is integrated to allow controlled jaw movement and repeatable clamping pressure, reducing operator error during setting. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Workshop Caliper Without Point Fine Adjustment Monoblock Stainless Steel 0.05mm Resolution DIN 862 - Metav IndustryLine
Reliable workshop precision meets robust construction: the combination of a hardened stainless steel monoblock frame, a fine-adjustment screw and a vernier readout with 0.05 mm resolution ensures stable, repeatable medium-range measurement. Order the caliper directly via Metav Werkzeuge or consult the technical advisors for specification matching. Workshop Vernier Caliper M201.325.1 — 0–500 mm, Monoblock, Fine Adjustment (Metav IndustryLine) The Workshop Vernier Caliper M201.325.1 is a medium-range measuring instrument designed for general machine‑shop use, offering a stiff monoblock frame and precise mechanical adjustment for reliable everyday inspection. Hardened stainless steel construction Precise fine-adjustment screw Monoblock frame for improved stiffness Vernier readout with 0.05 mm resolution Durable construction for consistent shop-floor performance The caliper’s hardened stainless steel body with a matt‑chromed scale is engineered to resist wear and minimise surface reflections, supporting long service life under regular workshop conditions. The monoblock design increases profile stiffness so that measurements remain stable across the full 0–500 mm range; this classifies the instrument as a medium-range caliper, which is particularly useful where reach and rigidity must be balanced. The integrated fine-adjustment mechanism allows controlled closing of the jaws for repeatable contact force and faster setup of routine checks. Mechanical accuracy explained for dependable results As an analogue vernier instrument, the caliper provides a reading accuracy determined by its vernier graduations: the lower scale corresponds to a metric vernier giving 0.05 mm increments, while a secondary vernier on the upper jaw runs to 1/128 inch for imperial reference. The instrument meets DIN 862 specifications for jaw lengths up to 200 mm; longer jaw versions from 250 mm are manufactured to the supplier’s factory standard. For workshop metrology this means straightforward, traceable readings from a robust mechanical instrument without reliance on electronics, making it ideal for environments where simplicity and serviceability matter. Practical handling, protection and lifecycle benefits The caliper is supplied as a ready-to-use workshop tool and is delivered in a transport case to protect the measuring faces during storage and transit. A jaw length of 200 mm provides practical access to a wide variety of components, while the overall mass and construction contribute to steady handling during measurement. The matt‑chromed scale eases visual reading and reduces glare under shop lighting; routine care—keeping the sliding surfaces clean and lightly oiled—maintains accuracy and extends service intervals. The combination of robust materials and mechanical fine adjustment supports efficient inspection routines and dependable repeatability on the shop floor. For precise medium-range measurement rely on Metav IndustryLine’s monoblock caliper; contact Metav Werkzeuge in Emmerich for product matching or ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M201.325.1 GTIN: 4054469101507 Manufacturer: Metav IndustryLine Numbers / Core technical data Measuring range: 0–500 mm Max measuring range: 500 mm Jaw length: 200 mm Weight: 4.3 kg Resolution: 0.05 mm Design / Special features Material: hardened stainless steel, matt‑chromed scale Monoblock frame construction Fine‑adjustment screw Vernier scales: 1/128" (top) and 1/20 mm (bottom) Compliance: DIN 862 up to 200 mm; factory standard from 250 mm Supplied in a transport case Without pointed jaw tips Analogue (mechanical) vernier readout FAQ What measuring range does this caliper cover? The instrument covers a 0–500 mm span, placing it in the medium‑range category suitable for many machine‑shop and fixture tasks; product SKU: M201.325.1. What resolution and vernier graduations are provided? Resolution is 0.05 mm, derived from the metric vernier; the caliper also carries a secondary vernier of 1/128 inch for imperial reference. What is the caliper made from and how durable is it? The caliper is manufactured from hardened stainless steel with a matt‑chromed scale, offering corrosion resistance and wear durability for workshop use. Is a protective case included with delivery? Yes, the tool is supplied in a transport case to safeguard the measuring faces and sliding surfaces during storage and transport. Which environments and applications suit this caliper best? This monoblock, fine‑adjustment caliper is intended for general machine shop inspection, jig and fixture checking, and routine quality control where a robust, repeatable mechanical measurement is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Workshop Digital Caliper Long Jaw, Colour 2.4" Touchscreen, ISO 17025 Calibrated - Microtech Metrology
Benefit from fast integration into digital workflows and factory traceability thanks to ISO 17025 calibration and a reliable Wireless+USB data path; the long 100 mm jaw and 0–500 mm measuring range ensure versatile mid‑range coverage for production and fixture work. Order the workshop caliper directly through Metav Werkzeuge or consult our advisors for tailored specifications. Workshop Caliper by Microtech Metrology — 0–500 mm, 2.4" Touchscreen The Workshop Caliper is a digital measuring instrument for medium‑range workshop and toolroom tasks, designed to combine fast data capture with traceable calibration for production use. Digital colour 2.4" touchscreen display 0–500 mm medium-range measuring capacity ISO 17025 calibrated with certificate Wireless + USB data output for traceability Traceable precision that speeds inspection This instrument delivers industrially relevant resolution of 0.01 mm, combined with ISO 17025 calibration and an included certificate, which removes uncertainty during incoming inspection and quality control. The certified calibration documents traceability to national standards, making the device suitable for parts validation and audit trails. With a defined measurement force 1–20 N, the caliper provides consistent contact pressure that reduces operator variability and supports repeatable measurements over time. Greater reach for larger components with workshop comfort Classified as a medium range instrument (maximum measuring length up to 500 mm), the tool closes the gap between compact shop gauges and large‑format instruments. The 100 mm long measuring jaw extends reach into deeper recesses and over larger flanges, while the robust build absorbs everyday handling in fixture and mould work. Handmade measuring jaws provide precise contact geometry, improving stability on both external and step measurements and ensuring longer service life in a busy workshop. Seamless digital data capture for modern production Equipped with a Colour 2.4" touchscreen and Wireless+USB data output, the caliper integrates into digital measurement routines effortlessly. Measurements can be transmitted directly to inspection software or logged via USB, reducing transcription errors and accelerating reporting. The responsive display and tactile interface speed up batch measurements and make read‑outs clear even in varied lighting conditions, improving throughput in quality checks. Built and documented for professional workflows The instrument combines practical durability with documentation that meets professional expectations: a factory ISO 17025 calibration certificate is supplied, confirming the device is ready for formal use in traceable measurement chains. The solid construction and carefully finished jaws support repeated inside, outside and step measurements without quick wear, while the digital electronics keep the workflow contemporary and auditable. For workshops seeking dependable tools that tie into statistical process control, this caliper offers a balance of reach, repeatability and digital connectivity. Contact Metav Werkzeuge in Emmerich for specification matching, delivery options and documentation queries — Metav’s advisors can confirm suitability for specific applications and arrange purchase or technical briefing via info@metav-werkzeuge.com Technical data Article number: 141005216 GTIN: 4061905038808 Manufacturer: Microtech Metrology Facts Measurement range: 0–500 mm Resolution: 0.01 mm Measurement force: 1–20 N Jaw length: 100 mm Display size: 2.4" colour touchscreen Special features Data output: Wireless + USB Handmade measuring jaws Delivered with ISO 17025 calibration certificate Digital caliper suitable for workshop and production use Category: Medium range caliper (300–500 mm) FAQ Is the caliper supplied ready for traceable measurement? Yes. The Workshop Caliper from Microtech Metrology is delivered fully calibrated with an ISO 17025 certificate, enabling immediate use in traceable inspection procedures (SKU 141005216). Which interfaces are available for data transfer? Measurements can be exported via the Wireless+USB outputs; the instrument supports direct USB logging and wireless transfer to compatible inspection systems. What measurement accuracy and resolution can be expected? The device provides a 0.01 mm resolution. Combined with the supplied ISO 17025 calibration, this gives reliable repeatability for standard workshop quality checks. Can the caliper measure inside, outside and step dimensions? Yes. The caliper is a multi‑function instrument capable of inside, outside and step measurements using its precisely finished jaws. Is the jaw design suitable for heavy‑duty workshop use? The caliper features handmade measuring jaws, designed for robust contact geometry and improved longevity in regular workshop operations. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500mm Workshop Precision Caliper With Pointed Jaws, Fine Adjustment, Monoblock, 0.05mm - Metav IndustryLine
Take advantage of the combination of robust monoblock construction, a 500 mm measuring range and precise fine adjustment to secure reproducible workshop measurements; order directly via Metav Werkzeuge or consult the technical team for application guidance. Metav IndustryLine Workshop Caliper M201.335 — 500 mm, Fine Adjustment, Monoblock The M201.335 workshop caliper is an analogue vernier caliper designed for workshop use and medium-format component measurement, providing sturdy handling and metric/imperial vernier reading. 500 mm measuring range for larger assemblies Hardened stainless steel with matt chrome scale Precise fine-adjustment thumb screw Vernier dual-scale: 1/128" and 1/20 mm Robust measurement reach with controlled stiffness The caliper's 500 mm measuring range places it in the medium class for workshop calipers, offering the reach required for larger fixtures and housings while retaining manageable stiffness and handling. The monoblock frame reduces torsion and flex during measurement, translating the operator's movement into stable contact conditions. A hardened stainless-steel construction with a matt-chrome scale ensures long-term legibility and resistance to workshop environments, so measurements stay consistent over repeated use. Precise setting and readable vernier scales Equipped with a fine adjustment mechanism, the instrument enables controlled approach to the measuring faces for repeatable results, particularly useful when small positional changes matter. The analogue vernier combination provides both imperial and metric reference: a top scale at 1/128" and a bottom scale at 1/20 mm, yielding an effective nominal resolution of 0.05 mm. These characteristics make the caliper well suited to general machine‑shop tasks where robust, easily interpreted measurement data is required rather than laboratory-level submicron resolution. Workshop-oriented features that simplify handling The caliper is supplied with pointed measuring tips to aid access to grooves and recesses, while the 150 mm jaw length improves reach into deeper bores and steps without sacrificing control. Compliance with DIN 862 for the applicable jaw length confirms that the measuring faces and nonius meet recognised workshop standards for form and function. Delivery includes a protective case for transport, reducing the risk of damage in daily workshop use and supporting repeatable, reliable readings across the production chain. For reliable shop metrology and ordering information, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 for technical advice and supply options Technical data Article number: M201.335 GTIN: 4054469101736 Brand: Metav IndustryLine Measuring range: 0–500 mm Jaw length: 150 mm Resolution / vernier: 0.05 mm (1/20 mm) and 1/128" Material: stainless steel, hardened, matt-chrome scale Norm: DIN 862 (valid for the given jaw length) Facts Measuring range (numeric): 500 mm Jaw length (numeric): 150 mm Resolution (numeric): 0.05 mm Zolltarifnummer: 90173000 Special features Monoblock single-piece construction Fine-adjustment thumb screw Pointed measuring jaws for grooves and steps Analogue vernier (metric and imperial scales) Protective transport case included FAQ What measuring tasks are best suited to this caliper? The M201.335 workshop caliper from Metav IndustryLine is intended for medium‑format workshop tasks such as measuring housings, spacers and fixtures where a 500 mm reach and robust handling are required. Does the caliper meet recognised standards? Yes. The caliper's design and measuring faces conform to DIN 862 for the applicable jaw length, ensuring workshop‑grade tolerances and interchangeability. Which materials is the caliper suitable for inspecting? The caliper is a general‑purpose measuring tool for dimensional checks on metal and engineered components; material compatibility is determined by the inspection task rather than the caliper itself. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Carbon Fibre Digital Caliper 130mm Jaws, IP65, Bluetooth, mm/inch Display, ISO-Calibrated In Case - Filetta
Take advantage of a light yet stiff carbon-fibre beam combined with steel measuring faces and reliable Digimatic/Bluetooth data transfer for fast, error‑reduced documentation and consistent workshop throughput; order via Metav Werkzeuge or consult our specialists for application advice. Filetta Digital Workshop Caliper M910.342 — Carbon‑fibre beam, 0–600 mm, Bluetooth The Filetta M910.342 is a robust digital workshop caliper designed for large‑format measurements in machine shops and fabrication environments, offering a high‑stiffness beam and protected electronics for everyday industrial use. Carbon‑fibre beam with steel measuring faces Measuring range 0–600 mm Digimatic and Bluetooth data output Dust‑ and waterproof to IP65 Stiff, lightweight construction for repeatable results The combination of a carbon‑fibre beam with steel measuring faces keeps mass low while preserving local stiffness at the jaws, resulting in a tool that is easier to handle over long strokes without sacrificing contact reliability. With a 0–600 mm measuring range and a 130 mm jaw, the caliper sits in the large‑range class (500–1,000 mm), making it suitable for measuring larger fixtures, housings and assemblies where beam rigidity and reproducibility are decisive. The overall length of 826 mm and a weight of 1.3 kg balance reach with manoeuvrability, reducing operator fatigue during repeated tasks. Practical precision and convenient handling for workshop control The instrument features a 0.01 mm display resolution and a stated accuracy of ±0.06 mm, which provides dependable workshop tolerances for production and inspection tasks where rapid checks and documented results are required. The slide offers fine adjustment and a locking screw for controlled, repeatable contact pressure; the specified measuring force of 5–10 N helps standardise contact while reducing variation from manual pressure. The digital display supports mm/Inch switching and ABS/INC modes, plus preset and reset functions, simplifying setup for batch work and first‑off inspections. Integrated data transfer and protected electronics for efficient processes Data can be output via Digimatic or Bluetooth, enabling direct capture into measuring software, spreadsheets or quality logs and minimising transcription errors in the production flow. The unit is sealed to IP65, protecting against dust and water jets commonly encountered in workshops, and is powered by a single CR2032 cell for long shelf and operating life. Delivery includes a protective case for safe transport and storage, so the device remains serviceable at the point of use and integrates smoothly into existing shop measurement routines. Contact Metav Werkzeuge for tailored advice on deploying the Filetta carbon‑fibre workshop caliper M910.342 in production and to discuss data integration; email info@metav-werkzeuge.com or call +49 2822 7131930 for proximity support from Emmerich. Technical data Article number: M910.342 Manufacturer: Filetta Name: Digital workshop caliper Carbon 0–600 mm IP protection: IP65 Facts Measuring range: 0–600 mm Resolution: 0.01 mm Accuracy: ±0.06 mm Overall length: 826 mm Jaw length: 130 mm Weight: 1.3 kg Measuring force: 5–10 N Battery: 1× CR2032 Special features Material: carbon‑fibre beam with steel measuring faces Data output: Digimatic and Bluetooth Display functions: mm/Inch, ABS/INC, On/Off, Reset/Preset Fine adjustment and locking screw Delivered in protective case FAQ How precise is this caliper for workshop checks? The Filetta M910.342 provides a display resolution of 0.01 mm with a stated accuracy of ±0.06 mm, suited to typical workshop tolerances and rapid inspection tasks. Can this caliper handle larger components and fixtures? Yes — with a 0–600 mm range and a 130 mm jaw it is classified in the large‑range category (500–1,000 mm) and is intended for measuring sizeable assemblies and machined parts. What options are available for data capture and logging? The instrument supplies measurement data via Digimatic and Bluetooth, allowing direct recording into measuring systems, data loggers or quality software without manual re‑entry. Is the caliper protected against coolant and dust? The unit is rated IP65, offering protection against dust ingress and low‑pressure water jets, suitable for workshop environments. Is a case and battery supplied with the caliper? The caliper is delivered in a protective case and uses one CR2032 battery for the electronics. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
600mm Carbon Fibre Digital Caliper 200mm Jaws, IP65, Battery CR2032, Bluetooth - Filetta
The combination of a 600 mm measuring range, lightweight carbon‑fibre construction and integrated Digimatic and Bluetooth outputs ensures efficient measurement of large components with reliable data transfer; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital Workshop Caliper Carbon 0–600 mm — long‑range digital caliper with carbon‑fibre beam and 200 mm jaws The Digital Workshop Caliper Carbon 0–600 mm is a robust, long‑reach measuring instrument designed for workshop and production environments where extended reach and mobile data capture are required Carbon‑fibre beam with steel measuring faces 600 mm measuring range for large components IP65‑rated dust and water protection Digimatic and Bluetooth data output Measure larger components with repeatable stability The caliper’s 600 mm span places it in the large‑range class (500–1,000 mm), making it suitable for substantial assemblies such as fixtures, housings and long shafts. The carbon‑fibre beam reduces overall mass while preserving profile stiffness; combined with steel measuring faces this yields a favourable stiffness‑to‑weight ratio that supports reproducible measurements along the entire jaw travel. This balance of reach and rigidity reduces the risk of bending‑induced error during hand measurements and simplifies two‑person handling for bulky parts. Accurate digital readout and seamless data capture Equipped with a digital display that reads to 0.01 mm and a stated accuracy of 0.08 mm, the instrument provides clear, machine‑readable values while minimising manual transcription. Dual data outputs—Digimatic and Bluetooth—enable direct connection to data collectors, inspection software or wireless logging systems, supporting streamlined quality control and traceable measurement records. The IP65 protection rating shields the electronics from workshop dust and splashes, extending service life under typical industrial conditions. Workshop ergonomics and secure handling A long 200 mm jaw length and total instrument length of 826 mm are paired with a practical fine‑adjustment wheel and a secure locking screw, allowing controlled closing and stable retention of readings. The caliper’s measured force range of 5–10 N promotes consistent contact pressure, which contributes to repeatability across multiple measures. Power is supplied by a single CR2032 cell for low maintenance, and the tool is delivered in a dedicated transport case to protect the instrument during transfer between job sites or storage. Integration into inspection routines and production flows Designed as a workshop‑grade digital caliper, the model supports quick inclusion into inspection routines thanks to its digital communication options and familiar keypad functions (mm/inch, ABS/INC, On/Off, Reset/Preset). For manufacturing environments that use digital readouts or SPC systems, the combined Digimatic and Bluetooth outputs significantly reduce data entry steps and help maintain consistent documentation. The unit’s construction and feature set make it a pragmatic choice for maintenance shops, jig and fixture assembly, and production lines where longer reach is required without sacrificing handling convenience. Contact Metav Werkzeuge for technical advice and delivery from our Emmerich warehouse on the Filetta carbon‑fibre 0–600 mm caliper (SKU M910.343); email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored assistance Technical data Article number: M910.343 Label: Digital Workshop Caliper Carbon 0–600mm and 200mm jaw length Manufacturer: Filetta Key figures Measuring range: 0–600 mm Maximum measuring range: 600 mm Total length: 826 mm Jaw length: 200 mm Weight: 1.4 kg Reading resolution: 0.01 mm Accuracy: 0.08 mm Measuring force: 5–10 N Protection class: IP65 Battery: 1x CR2032 Special features Carbon‑fibre beam with steel measuring faces Data output: Digimatic and Bluetooth Display functions: mm/inch, ABS/INC, On/Off, Reset/Preset Fine adjustment wheel and locking screw Delivered in a transport case Robust workshop design suitable for long‑range measurements FAQ What measuring range does this caliper cover? The Digital Workshop Caliper Carbon covers a range of 0–600 mm, making it suitable for larger workshop components and fixtures. Which data interfaces are available for measurement collection? This Filetta caliper offers both Digimatic and Bluetooth outputs for wired and wireless data transfer to readout devices and inspection systems. Is the caliper protected against dust and water? The instrument is rated IP65, providing protection against dust ingress and low‑pressure water jets typical in workshop environments. What power source does the caliper use and how long does it last? Power is via a single CR2032 battery; actual service life depends on usage patterns and wireless operation. Does the caliper include a fine adjustment or locking mechanism? Yes, it features a fine‑adjustment wheel for controlled closing and a locking screw to secure measurements. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
600mm Digital Caliper 150mm Blade Cross/Knife Tips 45mm Stainless Fine Adjustment Factory Standard 0.08mm - Metav IndustryLine
Benefit from a long-range, workshop-ready measuring tool that combines a 600 mm measuring capacity with hardened stainless steel construction and a precision fine-adjustment mechanism for reproducible results; the instrument supports clear digital read‑out and convenient unit switching. Order the caliper directly via Metav Werkzeuge or consult the technical advisers for application-specific guidance. Digital Caliper M217.028 — 600 mm range, fine-adjustment (Metav IndustryLine) A Digital Caliper M217.028 designed for measurement of large components in the workshop and toolroom, featuring combined cross and blade jaws for versatile external and internal checks. 600 mm measuring range Hardened stainless steel construction Fine-adjustment for reproducible settings Digital display with mm/inch and hold Reliable accuracy for large-format measurement The long-beam design addresses applications where reach and stability are essential: with a 600 mm measuring capacity and fully hardened stainless steel construction, the instrument is intended for reproducible measurement of larger fixtures, housings and assemblies. The integrated fine-adjustment mechanism minimises overshoot when closing the jaws, allowing precise positioning on the workpiece and consistent measurement initiation. Factory calibration to the declared Werksnorm with a tolerance of 0.08 mm establishes a clear quality baseline for incoming inspection and routine shop use. Built for workshop endurance and practical handling Robust materials and considered ergonomics reduce measurement variation over repeated cycles. The hardened stainless steel body resists wear and keeps sliding surfaces true; the extended jaw length of 150 mm supports probing deeper or recessed features while maintaining stiffness. At a weight of 1.4 kg the instrument remains manageable for single-person operation on benches or fixtures, while the long-beam format minimises bending across the useful span. The result is a device that combines reach, rigidity and repeatability for everyday industrial measurement tasks. Digital features that speed up inspection workflows The electronic readout provides immediate numeric values with 0.01 mm resolution and an inch equivalent reading of 0.0005 in, simplifying cross‑unit documentation. Dedicated keys include on/off, mm/inch, zero/ABS, hold, TOL and preset, enabling tolerance checks, temporary zeroing and data capture preparation without additional tools. A defined data output interface (RB 5) allows integration with data collection systems where required, supporting traceable measurement logging and reduced transcription errors during quality control. Contact Metav Werkzeuge to discuss how the Metav IndustryLine M217.028 can be integrated into production or inspection routines and to request a tailored quotation via the Emmerich team Technical data Article number: M217.028 GTIN: 4054469110769 ECLASS: 21170344 Brand: Metav IndustryLine Norm: Werksnorm Numbers / Core technical data Measuring range: 0–600 mm Resolution: 0.01 mm Inch resolution: 0.0005 in Jaw length: 150 mm Weight: 1.4 kg Factory tolerance: 0.08 mm Designs / Special features Material: hardened stainless steel Jaw types: cross point and blade (combined) Fine-adjustment mechanism Digital display with on/off, mm/inch, zero/ABS, hold, TOL, preset Data output: RB 5 Delivery format: workshop instrument (see ordering options) FAQ What measuring range does this caliper cover? The caliper covers a measuring span of 0–600 mm, making the M217.028 suitable for larger workshop components and long-beam measurement tasks. Is the instrument suitable for industrial quality control? Yes, the M217.028 from Metav IndustryLine offers a digital readout with 0.01 mm resolution and a factory tolerance of 0.08 mm, providing reliable values for standard inspection routines. Which materials is the caliper constructed from? The body and jaws are made from fully hardened stainless steel to provide long-term wear resistance and consistent mechanical stability. Can measurements be recorded electronically? A dedicated data output (RB 5) is provided to enable connection to data collection systems for traceable documentation of readings. Does the caliper include functions for tolerance checks? Yes, the display features a TOL function plus preset and hold keys to facilitate quick tolerance verification during repetitive checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Caliper 150mm Jaw Depth Rod Fine Adjustment Stainless Steel In Plastic Case - Metav IndustryLine
Combine robust hardened stainless steel construction with a 600 mm measuring range and a precise 0.01 mm display to keep production checks fast and reliable; the fine‑adjustment thumb screw ensures controlled contact for repeatable results. Order the digital caliper directly via Metav Werkzeuge or contact our consultants for application advice. Digital caliper M217.058 – 600 mm range, fine adjustment (Metav IndustryLine) The Digital caliper M217.058 is a large-format workshop instrument designed for industrial measurement tasks up to 600 mm, combining reach, stiffness and a controlled sliding mechanism for reliable shop‑floor use. 600 mm measuring range for large components Hardened stainless steel construction Fine‑adjustment thumb screw for precise contact Digital display with mm/inch, TOL and PRESET Measure large assemblies with controlled precision For operations that require reach without sacrificing repeatability, this large‑format caliper delivers a 600 mm span while maintaining measurement stability. Classified among workshop calipers for the 500–1,000 mm range, the instrument balances reach and rigidity so measurements across a component remain comparable. The 0.01 mm display resolution supports routine quality checks and production control, while the fine adjustment allows technicians to close the jaws smoothly for consistent contact force — a practical way to reduce rework and ensure parts leave the bench within tolerance. Built for workshop durability and predictable handling The sliding parts are machined from hardened stainless steel, providing corrosion resistance and long service life under everyday shop conditions. Extended jaws with a jaw length 150 mm offer secure contact on larger features; the calibrated rack and thumb screw help to reduce operator variation during repetitive checks. The tool is delivered to Werksnorm 0.06 mm, giving a clear factory tolerance for standard inspection routines. The digital display groups functions such as ON/OFF, mm/inch, 0/ABS, HOLD, TOL and PRESET to keep common tasks immediate and error‑free. Integrate measurements into digital workflows The caliper includes RB 5 data output for straightforward transfer of readings to SPC systems or inspection software, speeding documentation and cutting manual transcription errors. Quick toggling between mm/inch, the tolerance alarm function and PRESET support inline checks, while the standard 3 V power supply offers long‑running operation with low maintenance demands. The combination of digital readout and data output makes the instrument suitable for machine shops, quality departments and assembly lines seeking efficient traceability and fast decision making. Contact Metav Werkzeuge for technical details and procurement of the Metav IndustryLine digital caliper M217.058; our Emmerich warehouse supplies and consultants support selection and delivery – info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M217.058 GTIN: 4054469111018 Brand: Metav IndustryLine eClass: 21170344 Norm: Werksnorm Facts Measuring range: 0–600 mm Resolution (mm): 0.01 mm Resolution (inch): 0.0005 in Jaw length: 150 mm Power supply: 3 V Data output: RB 5 Special features Material: fully hardened stainless steel Fine adjustment (thumb screw) Digital display with ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Large‑format caliper for 500–1,000 mm class Factory tolerance: Werksnorm 0.06 mm Data output interface: RB 5 FAQ Is the caliper suitable for measurement of large components in the workshop? The Digital caliper M217.058 is designed for large‑format tasks up to 600 mm and provides the rigidity and jaw length needed for reliable workshop measurements. What accuracy can be expected during routine checks? Routine readout resolution is 0.01 mm; the instrument is supplied to a factory tolerance of Werksnorm 0.06 mm for standard inspection use. Does the caliper support digital data transfer to inspection systems? Yes. The M217.058 features RB 5 data output for integration with SPC or inspection software to streamline recording and analysis. Which display and operating functions are available? The digital display includes ON/OFF, mm/inch switching, 0/ABS, HOLD, TOL and PRESET to cover common measuring and tolerance workflows. Is the construction suitable for everyday shop use? The caliper is manufactured from fully hardened stainless steel, offering corrosion resistance and durability for regular workshop operation. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Caliper Fine-Adjustment Stainless Steel IP65 With mm/inch, 0/ABS, Hold, Tolerance, Preset - Metav IndustryLine
Benefit from a 600 mm measuring range, hardened stainless-steel construction and a precise fine adjustment mechanism for consistent large-format measurements; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital Caliper M217.058.1 — Metav IndustryLine, 600 mm range, fine adjustment The Digital Caliper M217.058.1 is a robust 600 mm digital caliper designed for large-format workshop and production measurement, suited to heavy machining, fixture inspection and component verification. 600 mm measuring range Hardened stainless-steel construction Fine adjustment for precise positioning Digital display with mm/inch & TOL functions Reliable large-format measurement for workshop and production This caliper’s 600 mm range places it in the large‑range class (500–1,000 mm), addressing measurement tasks that exceed the reach of standard workshop calipers while retaining manageable handling and repeatability. The fully hardened stainless-steel beam provides the stiffness needed to minimise deflection over long spans, so measurements taken on sizeable components—such as large housings, clamping fixtures or pipe sections—remain reproducible. The instrument is supplied to the manufacturer's factory tolerance (Werksnorm 0.06 mm), giving a clear, verifiable reference for quality control and process planning. Digital convenience and precise control for efficient inspection Equipped with a high‑contrast digital readout and standard functions (ON/OFF, mm/inch, 0/ABS, HOLD, TOL and PRESET), the caliper delivers the practical features expected on the shop floor. The display resolution of 0.01 mm supports routine dimensional control with clear, comparable values, while the integrated fine adjustment enables smooth, micro‑accurate positioning of the jaws for repeatable contact pressure and improved measurement stability. The instrument includes a data output (RB 5) for streamlined transfer of readings into documentation or inspection systems, supporting faster, error‑reduced workflows. Built for workshop durability and straightforward integration Construction in fully hardened stainless steel gives the caliper a corrosion‑resistant surface and the mechanical resilience required for daily industrial use. The digital measurement electronics run on a 3 V system, ensuring dependable operation with common batteries. The tool’s jaw geometry and a 200 mm jaw length balance contact area and accessibility when addressing deep or awkward features. For traceable baseline checks the caliper adheres to the specified factory standard; further calibration and certification options can be arranged where laboratory traceability is required. Request application advice from Metav Werkzeuge to confirm suitability for specific large-part measuring tasks and secure reliable delivery from our Emmerich quality hub Technical data Article number: M217.058.1 GTIN: 4054469111025 Brand: Metav IndustryLine Material: fully hardened stainless steel Measuring range: 0–600 mm Resolution: 0.01 mm Jaw length: 200 mm Data output: RB 5 Display functions: ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Measuring system: 3 V Standard: Werksnorm 0.06 mm Facts Measuring range max: 600 mm Resolution (display): 0.01 mm Jaw length: 200 mm Voltage: 3 V GTIN: 4054469111025 Special features Fine adjustment mechanism Digital readout with TOL and PRESET Corrosion‑resistant hardened construction Data output for system integration Supplied to factory tolerance (Werksnorm 0.06 mm) FAQ What is the measuring range of the caliper? The Digital Caliper M217.058.1 offers a measuring range of 0–600 mm, designed for large‑format components within the 500–1,000 mm class. What resolution and display functions are available? This caliper provides a display resolution of 0.01 mm and includes ON/OFF, mm/inch, 0/ABS, HOLD, TOL and PRESET functions for flexible inspection routines. Is the caliper suitable for heavy‑duty workshop use? Yes, the fully hardened stainless‑steel construction of the Digital Caliper M217.058.1 is intended for robust, daily industrial use and large‑part measurement tasks. Does the instrument offer data output for integration with inspection software? The caliper features a data output (RB 5) to facilitate transfer of measurements into compatible inspection systems and documentation workflows. What tolerance or calibration standard applies on delivery? The Digital Caliper M217.058.1 is supplied to the manufacturer's factory tolerance (Werksnorm 0.06 mm); specific calibration certificates can be arranged where laboratory traceability is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Caliper With 150mm Depth Rods And Cross Tips, Fine Adjustment, 0.01mm Readout, Factory Standard, Supplied In Case - Metav IndustryLine
Take advantage of the 600 mm measuring range, fine adjustment and a clear digital interface to measure large components with reproducible results; the hardened stainless construction ensures long-term stability in a busy workshop. Order the Metav IndustryLine digital caliper directly via Metav Werkzeuge or ask our consultants for advice. Metav IndustryLine Digital Caliper M217.038 – 600 mm range, hardened stainless steel The Metav IndustryLine M217.038 is a heavy-duty digital caliper designed for larger workshop and fixture measurements, combining a long measuring span with fine adjustment and a multifunctional digital display for traceable results *Large 600 mm measuring range, 150 mm jaw depth *Stainless hardened construction for workshop use *Fine adjustment and precise 0.01 mm resolution Measure larger components with repeatable stability This long-bar caliper sits in the 500–1,000 mm class and is optimised for measurements where reach and stiffness matter. The extended 600 mm span provides the coverage required for castings, housings and larger clamps while the hardened stainless steel beam maintains straightness and wear resistance across long-term use. The benefit for production and inspection is clear: fewer setups, consistent measuring geometry and fewer transfer errors when checking larger assemblies. Confident, traceable readings and convenient data handling A high-contrast digital display equipped with ON/OFF, mm/inch, 0/ABS, HOLD, TOL and PRESET keys gives straightforward control over measurement mode and tolerances; the display uses a standard 0.01 mm resolution and an inch step of 0.0005 in, providing clear numeric guidance for quality checks. The unit also offers a data output RB 5 interface for recording measurements directly into a data-collection workflow, reducing transcription errors and speeding up inspection cycles. The caliper meets the maker's Werksnorm 0.08 mm, ensuring a consistent baseline for everyday workshop accuracy. Precision handling and workshop convenience Fine adjustment allows controlled closing of the jaws for delicate surfaces and repeatable positioning, which reduces influence from hand pressure and improves reproducibility on delicate parts. Cross-point measuring tips expand the application range to reach into grooves and recesses while the overall design keeps common inspection tasks ergonomic and fast. The instrument is supplied in a transport case for secure storage and safe movement between workstations, which supports orderly workflows on the shop floor and protects the gauge between uses. Discuss the suitability of the Metav IndustryLine M217.038 for specific applications with Metav Werkzeuge in Emmerich or request configuration advice by phone or e‑mail Technical Data Article number: M217.038 GTIN: 4054469110806 Manufacturer: Metav IndustryLine ECLASS: 21170344 Facts Measuring range: 0–600 mm Resolution (display): 0.01 mm Inch resolution: 0.0005 in Jaw depth: 150 mm Norm: Werksnorm 0.08 mm Special features Material: stainless, fully hardened steel Fine adjustment for controlled jaw movement Digital display with ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Data output RB 5 for external logging Cross-point measuring tips for internal and recessed measurements Supplied in a transport case for protection FAQ What accuracy can be expected with this caliper? The Metav IndustryLine M217.038 offers a display resolution of 0.01 mm and is supplied to the manufacturer's Werksnorm 0.08 mm, providing reliable workshop-level accuracy for larger components. Is the caliper suitable for measuring internal grooves and recesses? Yes, the caliper is delivered with cross-point tips and a fine-adjustment mechanism, enabling precise internal and recessed measurements with controlled jaw contact. Can measurement data be exported from the instrument? Measurement data can be exported via the RB 5 data output, allowing direct integration of readings from the Metav IndustryLine caliper into inspection and documentation systems. What material is the beam made from and how does that help in the workshop? The beam and jaws are manufactured from fully hardened stainless steel, which resists wear and maintains straightness over long measuring lengths, ensuring reproducible results in daily shop use. Is the instrument delivered protected for transport between workstations? The caliper is supplied in a protective transport case to keep the instrument secure during movement and storage, helping to preserve calibration and precision. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Caliper With 150mm Probes, Fine Adjustment, Stainless Hardened, IP65? - Metav IndustryLine
Take advantage of the combination of a 600 mm measuring range, fully hardened stainless steel construction and a precise fine-adjustment thumb roller for reliable workshop measurement; Order the Digital Caliper M217.048 directly via Metav Werkzeuge or ask our consultants if needed Digital Caliper M217.048 — 600 mm range, 150 mm fine jaws by Metav IndustryLine The Digital Caliper M217.048 is a large‑range precision caliper intended for workshop and heavy‑duty machining tasks, combining a 600 mm measuring range with long, fine‑adjustment jaws for controlled positioning 600 mm measuring range, 150 mm fine jaws Hardened stainless-steel construction Digital display with mm/inch, HOLD, TOL, PRESET Fine-adjustment thumb roller for precise positioning RB 5 data output for traceable transfer Reliable large‑range measurement for heavier components Built for tasks that exceed standard shop lengths, this caliper sits in the large measuring‑range class (measuring range up to 500–1,000 mm) and is designed to keep measurements reproducible over extended spans. The 600 mm scale and 150 mm jaws provide reach for larger fixtures, housings and assemblies while retaining handling characteristics that remain practical for one or two operators. The fully hardened stainless steel beam improves wear resistance and maintains straightness so readings remain consistent over time; the tool conforms to the stated factory standard 0.06 mm for workshop tolerance. Precise readout and controlled handling for repeatable results The electronic system delivers a standard display resolution of 0.01 mm, allowing clear comparison of components against tolerances. Combined with the fine-adjustment thumb roller, the instrument supports deliberate, low‑force closing and high repeatability even when working with heavier jaws. With a mass of 1.35 kg, the caliper balances solidity and manoeuvrability to reduce vibration and operator‑induced error, making it a reliable instrument for routine quality checks and workshop metrology tasks where stability matters. Practical digital functions and data transfer for process integration The unit’s digital display provides straightforward controls — mm/inch, HOLD, TOL and PRESET — to speed measurement routines and support quick tolerance checks without manual conversion. Power is supplied by a 3 V cell and data can be exported via the RB 5 interface for traceable recording and integration into inspection workflows. The combination of electronic convenience and mechanical robustness positions this caliper as a pragmatic choice for departments that value clarity of measurement, simple documentation and reduced transcription errors For dependable large‑range measurement from Metav IndustryLine, contact Metav Werkzeuge for a tailored quote on the M217.048 or consult our specialists in Emmerich for application advice Technical data Article number: M217.048 GTIN: 4054469110868 Manufacturer: Metav IndustryLine Facts Measuring range: 0–600 mm Jaw length: 150 mm Resolution: 0.01 mm Weight: 1.35 kg Power: 3 V Data output: RB 5 Special features Material: fully hardened stainless steel Fine-adjustment thumb roller Digital functions: ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Factory standard: Werksnorm 0.06 mm FAQ Is the caliper suitable for measuring large workshop components? The caliper is designed for larger parts; with a 0–600 mm measuring range the M217.048 fits the large‑range category for workshop and heavy‑duty measurements. What accuracy and resolution can be expected? The instrument provides a display resolution of 0.01 mm and is supplied to a factory standard tolerance of 0.06 mm, making it appropriate for routine industrial quality checks. What material is the body made from and why is that important? The M217.048 is made from fully hardened stainless steel, which increases wear resistance and maintains beam straightness for repeatable readings in workshop environments. Which digital functions are included on the display? The caliper’s digital display includes ON/OFF, mm/inch selection, 0/ABS, HOLD, TOL and PRESET functions to facilitate quick checks and unit conversion. How is measurement data exported for documentation? Measurement values can be transferred via the RB 5 data output, enabling traceable recording and integration into inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Caliper With 200mm Jaw, Inductive System, Fine Adjustment, IP65 - Metav IndustryLine
Take advantage of the combination of a 600 mm measuring range, IP65 protection and an inductive measuring system for reliable shop-floor measurement of large components; order the instrument directly via Metav Werkzeuge or contact the consultants for tailored technical advice. Digital workshop caliper without tip (M217.124.1) — 600 mm range, IP65 protection, Metav IndustryLine The Digital workshop caliper without tip (M217.124.1) is a large-range precision caliper designed for heavy workshop use and measuring sizable components where robustness and repeatable results matter IP65 protection for harsh workshop conditions 600 mm measuring range with 200 mm jaws Inductive measuring system with 0.01 mm readout Fine-adjustment slider for controlled positioning High-accuracy measurement across long ranges The large-range classification for this instrument places it in the large-range caliper category (500–1,000 mm), making it suitable for measurements that require reach without sacrificing reproducibility. With a 600 mm measuring range and an inductive measuring system, the device delivers a clear 0.01 mm display step while its general accuracy is specified as Gen. 0,06 mm, providing a dependable baseline for workshop quality checks. The inductive system reduces susceptibility to surface contamination compared with mechanical readers, which helps maintain consistent readings over longer distances and in demanding environments. Built for workshop durability and precise handling Constructed from fully hardened stainless steel, the instrument combines corrosion resistance with the profile stiffness needed for repeatable long-span measurements. The 200 mm jaw length supports stable contact on larger workpieces, while the integrated fine adjustment slider allows controlled, incremental positioning for delicate aligning tasks. At approx. 1.2 kg, the caliper balances mass and manoeuvrability for single-operator handling and steady measurement work on heavy parts. Seamless data capture and practical display functions Equipped with a digital display that toggles mm/inch and offers HOLD, SET, ON/OFF, 0/INC and DATA functions, the instrument supports standard workshop workflows. The supplied RB 6 data output provides a direct machine-readable feed for compatible data collectors and external loggers, simplifying documentation and process control. The IP65 rating protects the electronics from dust and water jets, so data capture remains reliable even in lubricated or dusty production zones. Applications, suitability and operational benefits This caliper is ideal for toolrooms, fixture construction and heavy machining where extended reach and durability are required: measuring housings, shafts, mounting faces and larger assemblies. The combination of an inductive measuring system and a robust casing reduces measurement noise on the shop floor, while the clear digital functions accelerate routine inspections. Metav IndustryLine’s emphasis on accessible precision means this instrument is offered with the practical service infrastructure of a European logistics and quality filter, supporting straightforward procurement and professional aftercare when needed. For robust, long-range measurement choose the Metav IndustryLine digital workshop caliper — contact Metav Werkzeuge for technical consultation and reliable supply from Emmerich. Technical data Article number: M217.124.1 GTIN: 4054469164816 Manufacturer: Metav IndustryLine Measuring range: 0–600 mm Jaw length: 200 mm Resolution: 0.01 mm Weight: 1.2 kg Protection class: IP65 Material: fully hardened stainless steel Measuring system: inductive Display functions: mm/inch, HOLD, SET, ON/OFF, 0/INC, DATA Data output: RB 6 Fine adjustment: integrated slider FAQ What measuring range and jaw length does the caliper cover? The Digital workshop caliper without tip (M217.124.1) covers a measuring range of 0–600 mm and features a 200 mm jaw length for stable contact on larger components. How precise is the instrument for routine workshop checks? The instrument offers a display resolution of 0.01 mm and a general accuracy indication of Gen. 0,06 mm, combining clear readout with practical repeatability for shop-floor inspection. Is the device suitable for use in dusty or damp workshop conditions? Yes. The caliper is rated IP65, which protects the electronics against dust ingress and water jets, making it suitable for robust workshop environments. What data functions are available for documentation and logging? The caliper provides mm/inch display, HOLD, SET, 0/INC and DATA functions on the screen, together with an RB 6 data output for integration with compatible data collectors. Which materials and usages is the caliper designed for? Built from fully hardened stainless steel, the instrument is intended for general-purpose measurement of large metal components, fixtures and assemblies commonly encountered in machine shops and toolrooms. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Caliper With 300mm Depth Probes, Hardened Stainless Steel, IP65 RB 5 - Metav IndustryLine
The combination of a large 0–600 mm measuring range, hardened stainless-steel construction and precise fine adjustment supports reproducible measurements across larger components; benefit from clear digital readout and RB 5 data output for streamlined quality documentation. Order the caliper directly via Metav Werkzeuge or consult our specialists for application support. Digital Caliper M217.049 — 0–600 mm, hardened stainless steel, fine adjustment (Metav IndustryLine) The Digital Caliper M217.049 is a robust, large‑range measuring instrument designed for workshop and inspection tasks, offering fine adjustment, data output and corrosion‑resistant hardened stainless‑steel construction for consistent results on moderate to large components. 0–600 mm measuring range Hardened stainless‑steel construction Fine adjustment for precise positioning RB 5 data output; mm/inch and hold functions Large‑range precision for workshop and fixture work This caliper is configured as a large‑range (500–1,000 mm) instrument, making it suitable for measuring medium to large assemblies where reach and stiffness are decisive. The 0–600 mm span bridges the gap between standard workshop calipers and specialist long‑format gauges, so common tasks such as checking housings, fixtures or medium‑sized shafts can be completed with fewer setups. The hardened stainless‑steel beam preserves profile rigidity during use, which reduces measurement variation across the full travel. Clear digital readout and data handling for efficient QC Equipped with a digital display offering 0.01 mm resolution and an inch reading of 0.0005 in, the instrument supplies immediate numeric results that accelerate inspection routines. The display includes On/Off, mm/inch, zero/absolute, hold, tolerance (TOL) and preset functions, enabling quick checks against nominal values and straightforward integration into documented processes. The RB 5 data output simplifies transfer of measured values to logging systems or SPC software, which supports traceable quality workflows and reduces manual transcription errors. Practical features that support repeatable measurement A dedicated fine adjustment mechanism permits careful jaw approach for delicate seating and repeatable contact force, improving positioning on longer jaws and narrow features. The caliper is supplied with pointed measuring faces for specialised contact situations and a 300 mm jaw length that extends internal and depth measurement capability. The tool’s factory standard (Werksnorm) 0.08 mm indicates the production tolerance applied during manufacture, providing a clear reference for inspection acceptance in typical workshop contexts. For reliable large‑range measurement and straightforward data capture request the Metav IndustryLine M217.049 from Metav Werkzeuge — contact our specialists in Emmerich for an application review and tailored delivery details Technical data Article number: M217.049 GTIN: 4054469110882 Weight: 5 kg Material: stainless steel, fully hardened Measuring range: 0–600 mm Jaw length: 300 mm Core technical data Resolution: 0.01 mm Resolution (inch): 0.0005 in Power: 3 V Factory tolerance (Werksnorm): 0.08 mm Display type: digital Special features Fine adjustment mechanism Data output: RB 5 Digital functions: On/Off, mm/inch, zero/ABS, hold, TOL, preset Supplied in protective case Pointed measuring faces for specific contact tasks FAQ What measuring range does this caliper cover? The Metav IndustryLine Digital Caliper M217.049 covers 0–600 mm, providing a large working range for medium‑sized components. What resolution and readout options are available? The instrument offers 0.01 mm resolution on the digital display and 0.0005 in in inch mode, with mm/inch conversion, zero/ABS and hold functions. Is the caliper suitable for use in a production quality system? Yes, the M217.049 includes RB 5 data output for integration into data‑collection and SPC systems, facilitating traceable documentation of measured values. What material is the caliper made from and why does it matter? The caliper is manufactured from fully hardened stainless steel, which maintains beam stiffness and resists corrosion for longer service life under workshop conditions. Does the tool include a case and what type of jaws are fitted? The caliper is supplied in a protective case and fitted with pointed measuring faces and extended 300 mm jaw length for depth and internal measurements. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Precision Caliper With 150mm Jaws, Inductive Readout, Fine Adjustment, IP65 Protection - Metav IndustryLine
Take advantage of the combination of 600 mm measuring range, robust IP65 protection and a precise fine-adjustment drive for consistent workshop measurement. Order the tool directly via Metav Werkzeuge or contact our consultants for application advice. Digital workshop caliper M217.124 — 600 mm, IP65 (Metav IndustryLine) Digital workshop caliper M217.124 is a large-range digital caliper designed for workshop and industrial measurement tasks up to 600 mm, equipped with an inductive sensor and a fine-adjustment thumb wheel for repeatable, controlled readings 600 mm measuring range for large components IP65 dust and splash protection Inductive measuring system for stable readings Fine-adjustment thumb wheel for precise positioning Consistent, shop-ready measurements for large parts The caliper is built as a large-range instrument (measuring range 0–600 mm) to bridge workshop needs where reach and rigidity are essential. A fully hardened stainless steel beam provides the structural stiffness required for measurements over longer spans, reducing deflection and improving reproducibility. The inductive measuring system delivers stable sensor output even in environments with oil or metal dust, while the stated general accuracy of 0.05 mm ensures dependable indication for routine quality checks. These characteristics translate into fewer re-measurements, less scrap and a smoother production flow. Faster inspections with precise positioning and clear digital output Measurements are read on a clear digital display with mm/inch switching and practical keys (HOLD, SET, ON/OFF, 0/INC, DATA), enabling quick toggling and temporary value freezing during inspection cycles. The integrated fine adjustment thumb wheel permits micro‑positioning of the jaws for reliable contact without overshoot; combined with a jaw length of 150 mm, it is suited to larger features and stepped profiles. The instrument’s resolution of 0.01 mm supports fine tolerance work while the RB 6 data output facilitates logging and traceable data capture in connected measurement routines. Designed for workshop durability and straightforward integration With IP65 ingress protection and a robust, hardened stainless construction, the caliper tolerates typical workshop stresses while remaining low-maintenance. The instrument classifies as a large-range caliper (500–1,000 mm category), meaning it is especially useful for fixtures, housings and larger machined parts. The moderate weight (1.2 kg) balances handling with stability during single-person operation. Supplied as a digital measuring solution, the device is ready for integration into inspection workflows and can be combined with data acquisition systems via the RB 6 interface to support traceability and process control. For specification support or ordering of the Metav IndustryLine digital caliper M217.124, contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M217.124 GTIN: 4054469146881 Weight: 1.2 kg Material: stainless steel, fully hardened Measuring range: 0–600 mm Core technical values Resolution: 0.01 mm Indicated accuracy: 0.05 mm Jaw length: 150 mm Protection class: IP65 Special features Inductive measuring system Fine-adjustment thumb wheel Digital display with mm/inch, HOLD, SET, ON/OFF, 0/INC, DATA Data output: RB 6 Suited for workshop and industrial inspection FAQ What measuring range does this caliper cover? The digital workshop caliper M217.124 covers a measuring range of 0–600 mm, making it suitable for large components and assemblies. How precise is the digital display? Resolution on the display is 0.01 mm with an indicated general accuracy of 0.05 mm for the M217.124, suitable for standard workshop and metalworking quality checks. Is the caliper suitable for use in oily or dusty environments? Yes. The inductive measuring system combined with IP65 protection means the caliper is resistant to dust and splash water typical of workshop environments. Can measurement data be exported for documentation? Measurement values can be output via the RB 6 data interface and the device offers a DATA key for straightforward data capture. What advantages does the fine-adjustment drive offer? The fine-adjustment thumb wheel provides controlled jaw movement for precise contact and repeatable positioning, reducing operator-induced variation during inspection. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Precision Caliper With 150mm Probe, Fine Adjustment, Inductive System, IP65, Stainless Steel - Metav IndustryLine
Take advantage of the combination of IP65 protection, a 600 mm measuring range and a precise fine-adjustment mechanism for reliable workshop measurement of long components. Order the caliper directly via Metav Werkzeuge or request assistance from our consultants if further specification is required. Digital workshop caliper M217.134 — 600 mm, IP65, Metav IndustryLine The Digital workshop caliper M217.134 is a robust 600 mm digital caliper with fine adjustment and inductive measurement for workshop and production use. Robust IP65 protection for workshop use Inductive measuring system, accurate readout Fine-adjustment thumb screw for controlled setting Supplied in protective transport case Precision and repeatability for long components The instrument is engineered for demanding measurement tasks on larger parts: with a 600 mm measuring range it falls into the long‑bar category (“Mit Gross”, 500–1,000 mm), offering the reach required for housings, fixtures and longer workpieces while maintaining handling comfort. The inductive measuring system reduces wear on the scale and delivers stable readings; combined with a standard 0.01 mm resolution, the caliper provides repeatable numerical results that serve both workshop quality control and production routines. This technical setup supports faster decision-making on the shop floor and reduces rework by showing exact deviations at a glance. Robust construction for harsh environments Constructed from stainless steel, fully hardened, the instrument resists the mechanical stresses and abrasions common in metalworking environments. The housing and slider are sealed to IP65, ensuring splash and dust protection so that on‑site contamination does not compromise measurements. The robust build gives confidence when measuring in busy production areas or outdoors by the machine, supporting continuous use without frequent readjustments or downtime due to ingress-related faults. Controlled measurement and easy data transfer A dedicated fine‑adjustment thumb screw permits controlled approach and minimal overshoot when setting jaws on the workpiece, which is especially useful when measuring delicate surfaces or tight fits. The digital display offers mm/inch switching together with HOLD, SET, ON/OFF, 0/INC and DATA functions for flexible handling. For integration into data capture systems, the caliper includes an RB 6 data output, enabling collection of measured values for SPC, production logs or QC documentation and thus streamlining traceability in the production chain. Designed for everyday workshop productivity Ergonomic jaw geometry (150 mm tip length) and a weight of approximately 1.2 kg make the instrument practical for single‑operator use on benches and fixtures. Supplied in a protective transport case, the caliper is ready for storage and shipment, reducing risk of transit damage. Combined robustness, clear digital feedback and a reliable data interface position this measuring tool as a pragmatic choice for workshops needing long‑range accuracy without complex setup. For tailored advice on integrating the Metav IndustryLine digital caliper M217.134 into existing inspection routines, contact Metav Werkzeuge for a practical consultation and parts selection. Technical data Article number: M217.134 GTIN: 4054469146911 Manufacturer: Metav IndustryLine Facts Measuring range: 0–600 mm Resolution: 0.01 mm Weight: 1.2 kg Jaw (tip) length: 150 mm Protection class: IP65 Special features Inductive measuring system Digital display with mm/inch, HOLD, SET, ON/OFF, 0/INC, DATA keys Fine‑adjustment thumb screw Fully hardened stainless steel construction Supplied in protective transport case Data output: RB 6 FAQ What measuring range does the caliper cover and how is it classified? The caliper covers 0–600 mm and is classified in the “Mit Gross” range (500–1,000 mm), suited to long‑bar measurements for fixtures and housings. Is the instrument protected against coolant and dust? Yes. The caliper has an IP65 rating, which protects the measuring system and electronics against dust and low‑pressure water jets often encountered in workshop environments. What resolution and accuracy can be expected from the display? The digital display provides a 0.01 mm resolution with stable readings from the inductive measuring system, making it suitable for standard workshop quality control tasks. Does the caliper support data collection for SPC or documentation? Yes. The instrument features an RB 6 data output for connection to data loggers or SPC systems, simplifying documentation and traceability. Is the fine‑adjustment useful for delicate measurements? The fine‑adjustment thumb screw allows controlled positioning of the jaws, which is particularly beneficial when measuring delicate parts or achieving consistent contact force. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Workshop Caliper Carbon Frame 300mm Jaw Length IP65, Bluetooth, CR2032 Battery, Supplied in Case - Filetta
Take advantage of a robust combination of carbon‑fibre construction, steel measuring faces and reliable data transfer via Digimatic and Bluetooth to speed up workshop measurement tasks and reduce rework. Order the caliper directly via Metav Werkzeuge or consult our specialists for integration advice. Filetta Digital Workshop Caliper M910.344 — carbon body, 0–600 mm, 300 mm jaw length The Filetta Digital Workshop Caliper M910.344 is a long‑range digital caliper designed for large workshop components and industrial measurement tasks, pairing a lightweight carbon‑fibre beam with hardened steel measuring faces for repeatable results. Carbon‑fibre beam with steel faces IP65 protection for harsh environments Digimatic and Bluetooth data output 300 mm long jaws for deep reaches Fine adjustment and locking screw Durable construction for dependable workshop use The long‑span design combines a carbon‑fibre beam with steel measuring faces, which reduces weight without sacrificing the contact rigidity required for repeatable readings. Built to the 500–1,000 mm class of calipers, this instrument is intended for larger components where profile stiffness matters over the full measuring length. An IP65 rating guards electronics and slides against dust and water jets, keeping maintenance overhead low in busy production environments. Fast, traceable measurement workflow with modern outputs Equipped with both Digimatic and Bluetooth data outputs, the instrument supports immediate transfer to data loggers or SPC systems, accelerating quality documentation and minimising transcription errors. The digital display offers mm/inch switching, ABS/INC modes and a Reset/Preset function, while the readout resolution is 0.01 mm, enabling efficient inspection routines. Combining electronic transfer with a mechanical locking screw and fine‑adjustment control keeps measurements stable and reproducible during capture. Practical handling, delivery and operating details The caliper operates with a single CR2032 battery and is tuned for a measuring force of 5–10 N, a range that balances tactile control with consistent contact pressure. Long jaws of 300 mm reach into deeper slots and pockets, while the overall length of 826 mm and weight of 1.5 kg remain manageable for one‑person handling or two‑person tasks where required. Delivery includes a protective transport case and the instrument’s robust sliding mechanism simplifies everyday shop use without constant recalibration. Discuss the Filetta M910.344 with Metav Werkzeuge for a tailored supply and integration plan — contact Metav Werkzeuge in Emmerich to confirm suitability and delivery options Technical data Article number: M910.344 Manufacturer: Filetta Label: Digital‑workshop caliper carbon 0–600 mm and 300 mm jaw length Battery: 1x CR2032 Protection class: IP65 Material: Carbon fibre with steel measuring faces Measuring range: 0–600 mm Total length: 826 mm Weight: 1.5 kg Core specifications Readout resolution: 0.01 mm Accuracy: 0.12 mm Jaw length: 300 mm Measuring force: 5–10 N Features and functions Digital display with mm/inch, ABS/INC, On/Off, Reset/Preset Data output: Digimatic and Bluetooth Fine adjustment mechanism Locking screw for fixed measurements Delivered in protective transport case FAQ What is the measuring range and accuracy of the caliper? The Filetta Digital Workshop Caliper M910.344 measures from 0 to 600 mm with an accuracy of ±0.12 mm and a readout resolution of 0.01 mm. How can measurement data be transferred from the instrument? Data can be output via Digimatic interface or Bluetooth, allowing the Filetta caliper M910.344 to feed measurements directly into SPC or data‑collection systems. Is the instrument suitable for workshop conditions? Yes — the carbon‑fibre beam with steel faces, IP65 protection and a protective transport case make the Filetta M910.344 well suited for workshop and shop‑floor environments. What additional handling features improve measurement consistency? The caliper includes a fine‑adjustment control and a locking screw, and it maintains consistent contact pressure within the 5–10 N measuring force range to reduce operator‑induced variance. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
600mm Digital Workshop Caliper With 200mm Pointed Jaws, Fine Adjustment, Inductive System, IP65, Stainless Steel - Metav IndustryLine
Take advantage of the combination of IP65 protection, 600 mm measuring range, and inductive digital readout for reliable workshop measurement; order via Metav Werkzeuge or ask their consultants for tailored advice. Digital workshop caliper M217.134.1 — Metav IndustryLine, 600 mm range, IP65 the Digital workshop caliper M217.134.1 is a robust measuring instrument designed for heavy workshop use and medium-format components, combining a long measuring range with industrial sealing and a fine-adjustment mechanism IP65 dust and splash protection 600 mm measurement range Inductive digital measuring system Hardened stainless-steel construction Robust protection for workshop environments The caliper’s IP65 rating provides dependable resistance to dust ingress and water jets, making it suitable for busy machine shops and on‑site measurement where contamination or coolant spray is common. Thanks to the sealed electronics and the inductive measuring system, the instrument maintains stable readouts even in harsher environments, reducing downtime caused by sensor faults. This robustness supports a continuous production flow and less frequent instrument maintenance, which is particularly valuable for industrial metrology applications. Extended reach with workshop-grade rigidity With a measuring range of 0–600 mm, this instrument sits in the category for larger workshop calipers, ideal for medium assemblies such as housings, fixtures and larger machined parts. The combination of a long measuring span and a hardened stainless‑steel frame preserves straightness and repeatability across the full travel, so measurements remain reproducible. The relatively long jaw length (200 mm) helps when accessing deeper features while maintaining sufficient stiffness to keep results dependable. Precise readout and convenient operation The digital display offers a resolution of 0.01 mm and an inch equivalent readout, providing clear, actionable numbers for quality checks and production records. The display features mm/inch, HOLD, SET, ON/OFF, 0/INC and DATA controls, enabling quick unit changes, temporary freezing of readings and data output for traceable documentation. The fine‑adjustment mechanism grants smooth, controlled motion for exact jaw positioning—especially useful when measuring delicate fits or thin-walled parts—while the inductive system reduces wear-prone mechanical contacts. Practical delivery and data handling The instrument is supplied ready for workshop use in a protective transport case, which simplifies storage and safe handling between job sites. Data output via RB 6 is provided for external logging or integration with inspection software, supporting digital quality workflows and reducing transcription errors. The caliper’s weight of about 1.2 kg balances handheld usability with structural robustness, and the stainless‑steel, fully hardened construction ensures long service life under regular industrial use. Contact Metav Werkzeuge for advice on integrating the Metav IndustryLine caliper into existing inspection routines and to arrange delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support Technical data Article number: M217.134.1 GTIN: 4054469164847 Weight: 1.2 kg Material: hardened stainless steel Protection: IP65 Measuring system: inductive Display functions: mm/inch, HOLD, SET, ON/OFF, 0/INC, DATA Facts Measuring range: 0–600 mm Resolution: 0.01 mm Readout (inch): 0.0005 in Jaw length: 200 mm General tolerance: 0.06 mm Special features Fine adjustment mechanism Inductive, non-contact measurement Data output: RB 6 Supplied in transport case Robust workshop design FAQ What measuring range does the caliper cover? The Metav IndustryLine digital workshop caliper covers a measuring range of 0–600 mm, suitable for medium and larger workshop components. Is the instrument protected against coolant and dust? Yes. The caliper is rated IP65, offering protection against dust ingress and low-pressure water jets typical in workshop environments. What resolution and readout options are available? The display provides a resolution of 0.01 mm and an inch readout to 0.0005 in; the display supports mm/inch switching, HOLD, SET, ON/OFF, 0/INC and DATA functions. Can measurements be exported to a PC or data logger? Data output is available via RB 6, allowing recorded values to be transferred for documentation or quality‑control systems. Is the caliper suitable for precision laboratory use? The instrument is engineered for workshop and industrial inspection tasks where durability and practical accuracy are key; for sub‑micron laboratory applications, purpose‑built high‑precision instruments would be more appropriate. What does the transport case include? The caliper is supplied in a transport case to protect the instrument during storage and handling; the case is intended for safe transport rather than long‑term climate‑controlled storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Caliper With Pointed Jaws 200mm Depth 0.05mm Vernier Fine Adjustment Monoblock Inox, DIN 862 Box - Metav IndustryLine
Take advantage of a sturdy 600 mm measuring range together with a monoblock, hardened stainless steel frame and precise 0.05 mm vernier measurement for dependable workshop results; order the caliper directly via Metav Werkzeuge or contact our consultants for application advice. M201.336.1 Workshop Caliper with Point — 600 mm measuring range, 0.05 mm vernier — Metav IndustryLine M201.336.1 is a robust workshop caliper designed for large-format measurements in mechanical workshops and toolrooms, combining a long measuring range with a hardened monoblock construction for repeatable results. 600 mm measuring range Monoblock hardened stainless steel Fine-adjustment thumbwheel Dual vernier (1/128" / 1/20 mm) Built for heavy workshop use and reproducible results The long-range design classifies this tool as a large-range caliper (measuring range up to 1,000 mm), making it suitable where profile stiffness and reach matter. The one-piece monoblock frame reduces torsion and improves rigidity compared with multi-part assemblies, which supports consistent measurements across the full 600 mm stroke. The body is manufactured from hardened stainless steel and the scale is matt-chrome finished to reduce glare; together these features increase longevity under daily workshop conditions and lower the risk of corrosion or wear that would affect repeatability. Clear, reliable readings for mixed metric and imperial workflows The mechanical vernier provides a practical 0.05 mm resolution, matching common workshop accuracy expectations and enabling rapid checks without electronics. A dual vernier layout—1/128" on the upper scale and 1/20 mm on the lower—facilitates work on projects that require both imperial and metric references, reducing conversion errors and saving time at the bench. The integrated fine-adjustment thumbwheel allows controlled approach when closing the jaws, improving alignment and reducing overshoot; this combination supports efficient inspection routines and shortens process times in production checks. Practical handling and measurement versatility Pointed jaws extend the caliper’s capability for localised or recessed features, while a 200 mm jaw length gives a secure contact area for larger parts. Compliance with DIN 862 for the specified jaw length confirms that form and tolerances meet recognised workshop standards. The tool is balanced for single-person operation despite its length: the fine-adjustment control and smooth slide action make measured motions deliberate and repeatable, providing confidence when checking assemblies, fittings or machining setups. Contact Metav Werkzeuge for tailored advice on applications that benefit from a 600 mm monoblock caliper — our specialists in Emmerich will recommend the right solution and arrange supply of the M201.336.1. Technical data Article number: M201.336.1 GTIN: 4054469101774 Manufacturer: Metav IndustryLine eCl@ss: 21170344 Facts Measuring range: 600 mm Jaw length: 200 mm Resolution: 0.05 mm Vernier: 1/128" (top) and 1/20 mm (bottom) Customs tariff number: 90173000 Special features Material: hardened stainless steel, matt-chrome scale Monoblock frame construction Fine-adjustment thumbwheel Pointed jaws for localised contact DIN 862 (applicable for the stated jaw length) FAQ How accurate is the caliper for routine workshop checks? The M201.336.1 provides a mechanical resolution of 0.05 mm, which corresponds to standard industrial workshop practice and is well suited to general measurement and quality-control tasks. Can the vernier be used for imperial and metric readings? Yes; the caliper features a dual vernier—1/128" on the upper scale and 1/20 mm on the lower—so the M201.336.1 can be read directly in either system without on-the-fly conversions. Is the caliper suitable for larger components and assemblies? With a 600 mm measuring range the instrument is classified as a large-range caliper and is intended for larger components where reach and profile stiffness are required. Does the caliper meet recognised workshop standards? For the specified jaw length, the M201.336.1 conforms to DIN 862 requirements, ensuring consistent geometric and dimensional characteristics expected in professional environments. What practical advantages does the monoblock design give in everyday use? The monoblock frame reduces flex under load and improves stability over long spans; combined with the fine-adjustment thumbwheel, this leads to more reproducible contact positioning and fewer re-measures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Caliper With Pointed Jaws Fine Adjustment Monoblock 0.05mm, Hardened Stainless Steel, Case - Metav IndustryLine
Take advantage of robust monoblock construction, hardened stainless steel and precise fine adjustment to secure repeatable measurements across a 600 mm range; order the workshop caliper directly via Metav Werkzeuge or consult our technical advisors for application advice. Metav IndustryLine Workshop Caliper M201.336.2 — 600 mm range, fine adjustment The Metav IndustryLine Workshop Caliper M201.336.2 is a heavy‑duty, analogue monoblock caliper with a 600 mm measuring range, engineered for large workshop and machine‑building measurement tasks. 600 mm measuring range Hardened stainless steel construction Fine adjustment mechanism Dual vernier for precise readout Built for robust, long‑range workshop measurement The large‑format design places this instrument in the 500–1,000 mm class of calipers, where profile stiffness and repeatability over the entire length are essential. The monoblock frame minimises play and torsion, so measurements remain stable when handling larger workpieces such as fixtures, housings or long shafts. The hardened stainless steel body with a matt‑chromed scale protects the scale against wear while keeping contrast high for clear readings in busy workshop conditions. Precise analogue reading with vernier and fine feed The instrument combines a traditional vernier readout with a fine adjustment for controlled closing and repeatable positioning. The calibrated resolution of 0.05 mm supports reliable dimensional checks in routine production and maintenance. The vernier arrangement (dual scales) provides quick cross‑checks and familiar operation for technicians accustomed to mechanical callipers, while the fine feed reduces the risk of overshoot on delicate surfaces. Practical handling and measurement versatility Equipped for external, internal and step measurements, the device features pointed tips to reach narrow recesses and a jaw geometry suited to varied workshop tasks. The ergonomic slider and locking option maintain the set reading during transfer between stations, aiding workflow in busy shops. Compliance with DIN 862 for applicable jaw lengths ensures the caliper meets recognised mechanical measuring conventions; where jaw dimensions exceed standard limits, factory specifications apply. Application focus and quality of delivery This analogue caliper is directed at machine shops, toolrooms and maintenance departments that require a resilient instrument for larger components. The combination of a long measuring range, monoblock rigidity and hardened stainless construction makes it a solid choice where durability and repeatable results matter. For commissioning into inspection routines, the instrument integrates easily with existing quality processes thanks to its conventional operation and clear scale. Contact Metav Werkzeuge today to specify the Metav IndustryLine Workshop Caliper M201.336.2 for large‑format measurement tasks — our Emmerich team will advise on suitability and delivery to your site Technical data Article number: M201.336.2 GTIN: 4054469101781 ECLASS: 21170344 Tariff number: 90173000 Facts Measuring range: 0–600 mm Jaw length: 300 mm Resolution: 0.05 mm Analog instrument with vernier scales Special features Material: hardened stainless steel, matt‑chromed scale Monoblock design for increased stiffness Fine adjustment mechanism included Pointed tips for narrow recesses Norm: DIN 862 for specified jaw lengths FAQ What measuring tasks is this caliper best suited for? The Metav IndustryLine Workshop Caliper M201.336.2 is designed for workshop and machine‑building tasks that require a long measuring range and robust construction, such as checking housings, fixtures and long shafts. How precise is the vernier on this caliper? The analogue vernier offers a resolution of 0.05 mm and a dual‑scale arrangement that supports reliable repeatable readings for standard workshop quality control. Is the caliper suitable for internal and step measurements? Yes, the instrument supports external, internal and step measurements and is equipped with pointed tips to reach narrower features. Does the caliper comply with recognised standards? The caliper follows DIN 862 for applicable jaw lengths; for larger jaw configurations the device is supplied according to factory specifications. What materials and finish does the caliper feature? Constructed from hardened stainless steel with a matt‑chromed scale, the caliper is built for durability and high contrast in industrial environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Caliper With Pointed Jaws, Fine Adjustment, Monoblock, 0.05mm Vernier, Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of a 600 mm measuring range, a hardened stainless-steel monoblock beam and a precision fine-adjustment screw to measure large workpieces reliably and efficiently. Order the Workshop caliper M201.336 directly via Metav Werkzeuge or contact our consultants for further advice. Workshop caliper M201.336 — 600 mm range, hardened stainless steel monoblock with fine adjustment A workshop caliper designed for large-format components, combining a 600 mm measuring range with a robust monoblock beam and fine-adjustment mechanism for dependable, repeatable readings. 600 mm measuring range Hardened stainless-steel construction Fine-adjustment screw for repeatable settings Monoblock beam for long-length stability Reliable measurement capacity for large components The caliper is built for workshop and fixture applications where reach and stiffness matter: its 600 mm measuring range places it in the large-range category (500–1,000 mm), which is optimised for handling bigger assemblies such as housings, fixtures and medium-sized mould components. The long beam, realised as a monoblock design, reduces flex and ensures measurements taken across the full length remain reproducible. The mechanical vernier arrangement provides an industrial-grade reading step of 0.05 mm, making the instrument suitable for typical machine‑shop tolerances without relying on batteries or electronics. Robust materials and repeatable operation Constructed from hardened stainless steel with a matt‑chromed scale, the caliper withstands shop-floor conditions and keeps its graduations legible even with regular handling. The fine-adjustment screw allows incremental closing and accurate repeat positioning of the jaws, which is especially useful when measuring awkward or heavy components that require careful alignment. Pointed jaw tips are included to reach narrow grooves or internal features; the longer jaw length of 150 mm gives extra reach for particular tasks while the solid build keeps alignment stable during use. Practical standards and workshop compatibility The instrument uses a traditional vernier system (top: 1/128" for inch readout; bottom: 1/20 mm for metric vernier) that combines inch and metric utility on the same scale. Compliance is managed via recognised norms: DIN 862 applies for shorter jaw variants up to 200 mm, while larger sizes are produced to the manufacturer's workshop standard for long-range instruments. The analogue design makes it a robust choice for heavy daily use and for environments where electronic readouts are unsuitable. Choose the Metav IndustryLine caliper M201.336 for long-range workshop measurement tasks and contact Metav Werkzeuge for tailored advice or to arrange a purchase from our Emmerich facility Technical data Article number: M201.336 GTIN: 4054469101767 ECLASS: 21170344 Category: Messschieber (calipers) Facts Measuring range: 600 mm Measuring range (min): 0 mm Jaw length: 150 mm Resolution/step (vernier): 0.05 mm Nonius/vernier: 1/128" (top) and 1/20 mm (bottom) Tariff code: 90173000 Special features Material: stainless steel, hardened, matt‑chromed scale Fine adjustment: yes Monoblock design: yes Particulars: with pointed tips Construction: analogue/vernier caliper Norms: DIN 862 (jaw length ≤ 200 mm) / factory standard for larger sizes FAQ What measuring range does the caliper cover? The caliper covers a measuring range of 600 mm, making it a large-range instrument suited to medium‑sized components and fixtures. Is the caliper suitable for workshop use and rougher environments? Yes. The hardened stainless-steel construction and matt‑chromed scale make the tool durable for daily workshop use. How precise is the vernier on this caliper? The vernier provides a metric step of 0.05 mm (1/20 mm) and an inch reading via 1/128", which matches common industrial tolerance requirements. Does the instrument include a fine-adjustment mechanism? Yes, the caliper is fitted with a fine-adjustment screw to set and repeat jaw positions precisely. Which standards apply to this caliper? Shorter jaw variants are covered by DIN 862 up to 200 mm; larger sizes, such as the 600 mm instrument, are produced to the manufacturer's workshop standard for long-range models. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Caliper Without Probe Fine Adjustment Monoblock Stainless Steel 0.05mm, DIN 862 - Metav IndustryLine
Take advantage of a robust 600 mm measuring range, hardened stainless construction and a precise fine-adjustment thumb screw to measure large components reliably; order the instrument directly via Metav Werkzeuge or contact their consultants for implementation advice. Workshop caliper M201.326.1 — 600 mm, fine‑adjustment, Monoblock (Metav IndustryLine) The Workshop caliper M201.326.1 is a heavy‑duty analogue caliper engineered for large‑format measurement tasks in machine shops and fixture production. 600 mm measuring range Hardened stainless steel construction Fine‑adjustment thumb screw Supplied in a protective case Reliable reach for large components The large 600 mm measuring range places this instrument in the category for big components, where repeatable reach and stiffness are decisive. The monoblock frame reduces relative movement between beam and jaw so that measurements remain reproducible across the full span. With a jaw length of 200 mm, the caliper provides secure engagement on large workpieces and offers improved leverage where deeper grips are required. This construction supports efficient workshop workflows by combining reach with manageable handling weight. Accurate workshop readings with mechanical vernier control This analogue caliper uses a dual vernier configuration (noted on the instrument as 1/128" top and 1/20 mm bottom), delivering a practical resolution of 0.05 mm suitable for standard industrial inspection in accordance with DIN 862 where applicable. The vernier layout is straightforward for trained staff and yields quick comparative checks without reliance on electronics, which can be an advantage in robust production environments or at dusty workstations. Durable materials and user‑friendly handling Manufactured from hardened stainless steel with a matt‑chromed scale, the caliper resists corrosion and everyday wear while maintaining legible graduations. The integrated fine‑adjustment thumb screw enables precise closing and positioning of the sliding jaw, reducing hand variability during setting. A solid finish and the monoblock design combine to lower the risk of flexure and maintain measurement integrity over repeated use, which contributes to lower rework rates and steadier production quality. Practical delivery and workshop integration The instrument is supplied in a protective case for secure transport and storage, which simplifies logistics for workshop use and on‑site measurement tasks. As an analogue tool it offers immediate readiness without batteries, and its simple mechanical design ensures straightforward maintenance routines. For applications requiring traceable calibration, Metav can advise on suitable calibration options and intervals to match quality management systems. Contact Metav Werkzeuge for tailored advice on integrating the M201.326.1 workshop caliper into production workflows and to confirm availability from stock in Emmerich Technical Data Article number: M201.326.1 GTIN: 4054469101538 Weight: 4.5 kg Measuring range: 0–600 mm Jaw length: 200 mm Facts Resolution (vernier): 0.05 mm Tariff number: 90173000 Compliance: DIN 862 (applies for jaw length up to 200 mm) Special features Hardened stainless steel; matt‑chromed scale Monoblock construction Fine‑adjustment thumb screw Analogue vernier (1/128" top, 1/20 mm bottom) Supplied in protective case FAQ What measuring range does this caliper cover? The Workshop caliper M201.326.1 covers a measuring range of 0–600 mm, designed for large components and assembly measurements. What accuracy and resolution can be expected? The vernier setup provides a practical resolution of 0.05 mm; in workshop practice this equates to the standard mechanical accuracy range suitable for machine‑shop inspections and routine quality checks. Is the instrument suitable for heavy or large workpieces? Yes — the monoblock frame, 600 mm reach and a 200 mm jaw length make the instrument appropriate for larger components where stiffness and repeatability matter. What materials and finish are used? The caliper is made from hardened stainless steel with a matt‑chromed scale for enhanced durability and clear readability under workshop conditions. What is included in the delivery? Delivery includes the workshop caliper M201.326.1 and a protective case for transport and storage Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Caliper Without Probe For Outside, Inside And Step Measurement, Hardened Stainless Steel, Fine Adjustment, Wooden Case - Metav IndustryLine
Combining a hardened stainless-steel construction, a 600 mm measuring range and a fine-adjustment screw provides stable, reproducible results on large workshop components; ideal where rigidity and repeatability matter. Order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Workshop Caliper M201.316 — 600 mm stainless steel, 0.02 mm vernier (Metav IndustryLine) A Workshop Caliper M201.316 engineered for long-reach external, internal and step measurements in heavy workshop and fabrication settings. 600 mm measuring range for large components Hardened stainless steel construction Fine-adjustment screw for precise setting Vernier scales with 0.02 mm resolution Repeatable precision for large components The caliper’s 600 mm measuring range places it in the long-bar category (500–1,000 mm), making it suitable for sizeable workpieces such as housings, fixtures and large fittings. The monoblock design increases profile stiffness across the entire beam, reducing deflection and helping to keep measurement uncertainty low when working at extended reach. The hardened stainless steel body with a matt‑chromed scale ensures resistance to corrosion and wear, which maintains accurate graduations even after prolonged workshop use. This combination supports consistent results in repetitive quality-control tasks and reduces rework. Engineered for robust workshop use and clear benefits Long jaws (150 mm) and a robust jaw geometry allow secure seating on external and internal edges as well as reliable step measurements; the caliper is specified for external, internal and step measurements. The mechanical construction avoids electronics, offering a maintenance‑free solution where ruggedness is essential. The factory standard (Werksnorm) build focuses on practical longevity: hardened measuring surfaces resist edge wear, while the matt finish minimises glare and simplifies reading under workshop lighting. For production environments that prioritise uptime and traceable routine checks, the tool’s mechanical simplicity and durability translate directly into lower operating risk. Precise analogue measurement with fine adjustment This analogue vernier instrument provides a metric reading resolution of 0.02 mm, derived from the vernier arrangement shown on the scale; the dual-scale arrangement also supports imperial reading via the 1/1000" marking for inch-based checking. The fine-adjustment screw allows the operator to approach the final measurement gently and lock the slider without overshoot, improving repeatability when measuring narrow tolerances. Because the caliper is purely mechanical, it requires no batteries and is immediately available for intermittent or continuous use in both shopfloor inspection and assembly operations. Clear graduations and tactile control make it especially suitable for skilled machinists and maintenance technicians who require direct, dependable measurement feedback. Contact Metav Werkzeuge today on +49 2822 7131930 or info@metav-werkzeuge.com to discuss application details or to secure the Metav IndustryLine 600 mm workshop caliper for in-house measuring tasks Technical Data Article number / SKU: M201.316 GTIN: 4054469101354 ECLASS: 21170344 Norm: Werksnorm Facts Measuring range: 0–600 mm Resolution: 0.02 mm Jaw length: 150 mm Nonius / vernier: 1/1000" (top) and 1/50 mm (bottom) Special features Monoblock design Fine-adjustment screw Hardened stainless steel with matt‑chromed scale Analogue vernier operation Suitable for external, internal and step measurements FAQ What measuring range does this caliper cover? The Workshop Caliper M201.316 covers a measuring range of 0–600 mm, placing it in the long‑bar category for larger components. What resolution and scales are available on the instrument? The caliper features a vernier resolution of 0.02 mm on the metric scale and an imperial reference of 1/1000" for inch‑based checks. Is the caliper suitable for internal and step measurements? Yes — the design is specified for external, internal and step measurements and includes elongated jaws (150 mm) to reach deeper features. Does the instrument require batteries or electronic calibration? No — this is an analogue vernier caliper with mechanical fine adjustment; it operates without batteries and is delivered to factory standard. What material and surface treatment are used for the measuring surfaces? The caliper is manufactured from hardened stainless steel with a matt‑chromed scale to improve wear resistance and readability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision measurement for heavy components with workshop calipers
Workshop calipers, also described as heavy-duty calipers or industrial vernier calipers, are engineered for exact external and internal measurement on large workpieces. Designed for shipbuilding, rail vehicle manufacture and heavy plant assembly, these calipers deliver stable, repeatable readings even across extreme spans up to 10,000 mm (10 metres).
How these calipers perform in industrial practice
Built with an extremely distortion-free frame of hardened or weight-optimised special steel, workshop calipers maintain alignment across long reaches and heavy contact forces. They measure shafts, flanges and housings by combining robust jaws with optional measuring-force-limiting systems, fine micrometric slider adjustment and rounded internal measuring faces to reduce damage and measurement error. Available in analogue form with a fine vernier scale or as a digital variant with data output for direct integration into quality assurance systems.
Practical advantages that improve production
- Proven metrological stability for large components thanks to distortion-free construction.
- Hands-on ergonomics through measuring-force-limiting and precision fine adjustment, reducing operator error.
- Flexible data handling with digital data output for seamless quality documentation.
- Materials and design that withstand heavy workshop environments: hardened special steel or weight-optimised alternatives.
- Measurement range scalability up to 10,000 mm (10 metres) for XXL applications.
Why Metav is the sensible partner for these tools
Metav stands for the democratisation of precision and acts as a quality filter for the European market from its base in Emmerich. With over 48,000 customers and a portfolio exceeding 250,000 products, Metav combines long-standing expertise with a comprehensive range that simplifies procurement for industry and trade. In the field of workshop calipers, Metav’s assortment is positioned as the optimal choice, offering both analogue vernier solutions and modern digital models suitable for integration into industrial measurement workflows.
Core takeaway
For reliable dimensional control of oversized components, workshop calipers deliver measurable gains in repeatability, ergonomics and process integration—making them indispensable in heavy industry.
FAQ
What measuring ranges are available for workshop calipers?
Workshop calipers are offered for extreme tasks, with models covering spans up to 10,000 mm (10 metres) to accommodate large shafts, flanges and housings.
Can these calipers connect to quality assurance systems?
Yes. Many industrial vernier calipers are available with digital data output, enabling direct transfer of measurement values into QA systems for traceable documentation.
Which design features reduce operator-induced error?
Features such as a measuring-force-limiting system, a precise fine-adjustment mechanism and rounded internal measuring faces reduce variability and the risk of damaging components during measurement.
What materials ensure long-term stability for large-scale measurement?
Metav’s workshop calipers use hardened special steel or weight-optimised variants to ensure minimal distortion and lasting dimensional stability even under heavy use.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com