Heavy-duty workshop verniers for large components
Our heavy-duty workshop verniers provide precise external and internal measurement of massive workpieces such as large shafts, flanges and housings, delivering stability and repeatable results even across spans up to 10,000 mm. Designed for the demands of heavy industry, shipbuilding and rail vehicle manufacture, they combine a distortion‑resistant construction in hardened or weight‑optimised special steel with ergonomic features like force‑limited measuring systems and fine adjustment for exact slide movement. Available in analogue versions with fine vernier scales or digital variants with data outputs for quality assurance integration, these calipers ensure reliable dimensional control in XXL machining.
400mm Workshop Caliper With Pointed Jaws Fine Adjustment Monoblock Hardened Stainless Steel 0.05mm Resolution - Metav IndustryLine
The combination of hardened stainless steel construction, a 400 mm measuring range and precise fine adjustment ensures reproducible workshop measurements for medium‑sized components; benefit from robust rigidity and clear scale contrast for faster inspection cycles. Order directly via Metav Werkzeuge or consult our specialists for application advice. Workshop Caliper M201.334 – 400 mm, hardened stainless steel, fine adjustment (Metav IndustryLine) Workshop Caliper M201.334 is a medium‑range analogue caliper designed for accurate external, internal and step measurements in machine shops and maintenance environments. Hardened stainless steel construction 400 mm measuring range (medium class) Precise fine adjustment for repeatable settings Monoblock frame for increased rigidity Matt‑chrome scale for clear reading Precision where reach meets rigidity This caliper is built for repeatable dimensional checks across larger workpieces: the 400 mm range places it in the medium‑range category, offering a practical balance between reach and stiffness for jig, fixture and housing measurements. The analogue vernier provides a 0.05 mm reading step, enabling routine workshop tolerances to be checked reliably while the fine adjustment wheel allows controlled contact force and precise positioning. This reduces rework and speeds up inspection loops. Durable construction for everyday workshop use Manufactured from hardened stainless steel with a matt‑chrome scale, the instrument resists corrosion and wear while maintaining legibility under bright workshop lighting. The monoblock design increases profile stiffness and preserves zero‑setting over time, which supports consistent results during repetitive measuring tasks. Pointed jaw tips improve access to grooves and narrow features without compromising the overall jaw stability. Readable vernier and compliant design The vernier arrangement offers imperial and metric references—1/128" on the upper scale and 1/20 mm on the lower—so conversions and cross‑checks are straightforward on the shop floor. Normative notes are observed: jaw length guidelines follow DIN 862 for shorter snabs, with factory standards applied for larger lengths as indicated in the product specification. Being an analogue instrument, it requires no power supply and is immediately ready for direct measurement work. Practical handling and application benefits Ergonomics and handling are tuned for frequent use: the fine adjustment assists in achieving repeatable contact without sudden jumps, while the robust frame tolerates daily workshop handling. The caliper is ideal for machinists, toolmakers and service technicians needing dependable medium‑range checks on shafts, housings and assembled components. For specialised measuring tasks, Metav’s technical advisors can help match the instrument to a specific quality workflow. For reliable medium‑range measurements, choose the Metav IndustryLine caliper M201.334—contact Metav Werkzeuge in Emmerich for tailored advice and order assistance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M201.334 GTIN: 4054469101699 EClass: 21170344 Customs tariff number: 90173000 Measurements & accuracy Measuring range: 0–400 mm Resolution/reading step: 0.05 mm Vernier: 1/128" (top) and 1/20 mm (bottom) Jaw length: 100 mm Standard: DIN 862 (jaw length rules), factory norm for larger lengths Materials & features Material: hardened stainless steel, matt‑chrome scale Monoblock frame construction Fine adjustment (feineinstellung) Analogue vernier caliper (nonius) Pointed jaw tips (mit Spitzen) Designed for workshop and machine‑shop use FAQ What measuring range does the caliper cover? The caliper covers a measuring range of 0–400 mm, classifying it as a medium‑range instrument suitable for many machine‑shop tasks; refer to the specification for jaw length and handling notes. What resolution and reading system are provided? The instrument gives a 0.05 mm vernier reading; the dual vernier scales (1/128" and 1/20 mm) allow metric and imperial cross‑checks on the workshop floor. Is the caliper ready to use out of the box for workshop checks? Yes, the analogue caliper is delivered ready for use; the fine adjustment enables controlled contact and quick repeatability for routine inspection operations. Which materials and environments is the caliper suited to? Constructed from hardened stainless steel with a matt‑chrome scale, the caliper tolerates regular workshop exposure and is suitable for general metalwork and maintenance measurement tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Workshop Caliper Without Point With Fine Adjustment Monoblock Stainless Steel Matt Chrome Scale - Metav IndustryLine
Combine robust hardened stainless steel construction with a 400 mm measuring range and precise fine adjustment to secure repeatable workshop measurements; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine Workshop Caliper M201.324.3 — 400 mm range, fine-adjustment monoblock (analogue) The Workshop Caliper M201.324.3 is an analogue measuring instrument for workshop and production use, offering a 400 mm range with fine adjustment and a monoblock frame for reliable everyday measurement tasks. 400 mm measuring range for mid‑size assemblies Hardened stainless steel with matt‑chrome scale Fine‑adjustment screw for repeatable results Analogue vernier with 0.05 mm resolution Durable mid‑range solution for production measurement The instrument is designed as a mid‑range caliper (300–500 mm), giving the reach needed for larger fixtures and housings while remaining manageable for single‑person handling. Its monoblock construction and hardened stainless steel body reduce flexing over the travel, which translates into more reproducible readings and fewer rework cycles. The matt‑chrome scale improves legibility under workshop lighting and resists wear, helping to maintain a stable measuring baseline across repeated use. Precise analogue reading and controlled adjustment Equipped with an analogue vernier offering a reading step of 0.05 mm and an upper/lower vernier arrangement, the instrument supports reliable dimensional checks where digital displays are not required. The integrated fine‑adjustment screw allows the operator to approach the final measure slowly and lock the jaw position without disturbing the setup, reducing operator‑induced scatter and speeding up inspection loops in batch production. This combination supports efficient quality control and consistent part acceptance. Practical measuring modes and workshop compatibility Constructed for external, internal and step measurements, the caliper provides the essential functions for routine workshop inspection and set‑up work on machines and jigs. The delivered norm information notes compliance with DIN 862 for jaw lengths up to 200 mm, with factory standards applied for larger jaw configurations; this gives a clear baseline for traceability and acceptance in standard machine‑shop workflows. Robust materials and a straightforward mechanical layout favour low maintenance and long service intervals. Choose the Metav IndustryLine caliper when robustness and repeatable 400 mm measurement capability are essential, and contact Metav Werkzeuge in Emmerich for product matching and technical clarification via info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: M201.324.3 GTIN: 4054469101484 Brand: Metav IndustryLine Facts Measuring range: 0–400 mm Resolution: 0.05 mm (analogue) Jaw length: 200 mm Vernier: 1/128" top and 1/20 mm bottom Tariff number: 90173000 Special features Material: hardened stainless steel, matt‑chrome scale Monoblock frame construction Fine‑adjustment screw included Analogue vernier instrument Conforms to DIN 862 for jaw lengths up to 200 mm FAQ What measuring range does this caliper cover? The caliper covers a measuring range of 0–400 mm, making it suitable for mid‑size workshop components and assemblies. How precise is the analogue reading on the instrument? The instrument provides an analogue resolution of 0.05 mm via the vernier scales, supported by the fine‑adjustment screw for controlled closure. Is the caliper suitable for internal and step measurements? Yes, the caliper is designed for external, internal and step measurements, providing the basic modes required in workshop inspection. What material and finish are used for durability? The body is made from hardened stainless steel with a matt‑chrome scale finish to resist wear and improve long‑term legibility. Does the caliper follow recognised standards? The product references DIN 862 for jaw lengths up to 200 mm, with factory standard procedures applied for larger jaw configurations Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Workshop Caliper Without Probe Fine Adjustment For External, Internal And Step Measurement, Hardened Stainless Steel In Case - Metav IndustryLine
Take advantage of a robust, hard-wearing instrument that combines precise 0.02 mm scale reading, a 400 mm measuring range and a fine‑adjustment mechanism for repeatable workshop results; order directly via Metav Werkzeuge or consult our specialists for application advice. Workshop Vernier Caliper M201.314 — 400 mm stainless, fine-adjustment The Workshop Vernier Caliper M201.314 is an analogue workshop caliper designed for reliable external, internal and step measurements in metalworking and general fixture work. 400 mm measuring range Hardened stainless steel body Fine-adjustment thumb screw Vernier reading to 0.02 mm Precise measurement where consistency matters The caliper delivers a 400 mm measuring range in a monoblock design that keeps the beam stiff and reduces bending during everyday use. The 0.02 mm scale division provides clearly defined increments for typical workshop tolerances, while the dual Vernier scales (top: 1/1000", bottom: 1/50 mm) support readouts that experienced operators can interpret quickly. For tasks that demand reproducible results — such as setup checks, incoming inspection of components or quick go/no‑go verifications — the instrument balances reach and rigidity so measurements remain reliable over long runs. Durable construction for a harsh workshop environment Manufactured from hardened stainless steel with a matt‑chromed scale, the caliper resists corrosion and wear that shorten tool life in aggressive environments. The jaw length 125 mm and a total weight of approximately 1.2 kg give a tactile sense of robustness without hampering one‑handed use. The integrated fine‑adjustment thumb screw enables controlled closing of the jaws, reducing the influence of operator pressure on the reading and helping to avoid repeated rework. For transport, the instrument is supplied in a protective case suitable for workshop logistics. Versatility that reduces tool stacking and cycle time Configured for external, internal and step measurements, this analogue caliper covers the most common measuring tasks on the shop floor and in jigs and fixtures. The absence of a pointed tip simplifies alignment on broad contact surfaces and reduces the risk of damage when measuring delicate parts. Where users need a single measuring tool to handle multiple checks, this instrument shortens process chains and reduces handling time, giving a measurable productivity advantage in repetitive operations. Practical benefits for production and maintenance teams The simple mechanical design minimises electronic failure modes and keeps maintenance straightforward, while the Vernier reading and visible scale make results immediately verifiable by visual inspection or cross‑checking. The caliper’s monoblock construction and hardened finish mean fewer calibration cycles caused by wear, and the fine‑adjustment control supports consistent measuring force for better repeatability. These characteristics result in lower overall measurement uncertainty and fewer costly adjustments on machines and fixtures. For hands‑on reliability from the Metav IndustryLine, contact Metav Werkzeuge for tailored advice and fast supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M201.314 GTIN: 4054469101330 eClass: 21170344 Numbers / Core technical data Measuring range: 0–400 mm Resolution / scale division: 0.02 mm Jaw length: 125 mm Weight: 1.2 kg TARIC / customs code: 90173000 Special features / Versions Material: hardened stainless steel, matt‑chromed scale Monoblock construction Fine‑adjustment thumb screw Analogue vernier (top 1/1000", bottom 1/50 mm) For external, internal and step measurements Supplied in protective transport case Manufacturing standard: Werksnorm FAQ Is this caliper suitable for general metalworking tasks? The Workshop Vernier Caliper M201.314 is designed for general metalworking and workshop use, covering external, internal and step measurements across typical component sizes. What reading accuracy can be expected from the instrument? The scale division is 0.02 mm and the dual Vernier configuration supports precise analogue readings appropriate for routine workshop tolerances. Does the caliper come ready to use or is calibration required? The instrument is supplied ready for use; it follows the stated manufacturing standard (Werksnorm). A protective case is included for transport and storage. How does the fine‑adjustment help in daily use? The fine‑adjustment thumb screw enables controlled closing of the jaws, reducing variation from operator pressure and improving repeatability of the measure. Which materials and environments is the caliper built for? Constructed from hardened stainless steel with a matt‑chromed scale, the caliper resists corrosion and is suited to workshop environments where durability is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Workshop Caliper, 125mm Jaws, 0.05mm Graduation, Rust‑Resistant Hardened Steel, Matt Chrome Scale, Case Included - Metav IndustryLine
Combine robust hardened stainless steel, precise fine-adjustment and a 400 mm measuring range for dependable workshop measuring. Order the Workshop Caliper M201.324.1 directly via Metav Werkzeuge or ask our consultants if needed. Workshop Caliper M201.324.1 — analogue monoblock caliper with fine-adjustment (Metav IndustryLine) The Workshop Caliper M201.324.1 is an analogue monoblock caliper designed for shop and fixture work, offering a 0–400 mm measuring range with a vernier resolution of 0.05 mm for reliable external, internal and step measurements. 0–400 mm measuring range Hardened stainless steel construction Fine-adjustment thumbwheel Monoblock design for rigidity Reliable performance for everyday workshop measurement The monoblock frame and hardened construction deliver consistent stability across the full measuring length. The monoblock construction reduces flex and improves repeatability when measuring larger components, which is particularly important in fixture and toolroom tasks where reproducible results speed up set-up and reduce rework. The integrated fine-adjustment allows controlled clamping of the jaws so that setting to a measurement is smooth and precise. Measuring system and accuracy explained Measurement is achieved via a traditional vernier arrangement with a top scale in inches and a bottom vernier in millimetres: 1/128" at the top and 1/20 mm (equivalent to 0.05 mm) at the bottom, providing clear, mechanical readout without electronics. The caliper is supplied according to the stated standard: DIN 862 applies for shorter jaws up to 200 mm, while lengths from 250 mm follow the manufacturer's factory standards. This combination gives a straightforward accuracy class suitable for robust shop use. Materials and long-term durability in harsh environments Made from hardened stainless steel with a matt‑chromed scale, the instrument resists corrosion and wear in routine industrial environments. The matt finish reduces glare and improves legibility under workshop lighting. The jaw length of 125 mm supports access into recesses and deeper features while the hardened surfaces keep the measuring faces true over extended service life, reducing the need for frequent replacement. Integration into the workshop and dealer support The analogue, mechanical design requires no batteries and is straightforward to maintain, making it a practical choice for production floors and service benches. Metav IndustryLine positions this caliper as a dependable shop tool within its metrology range; Metav’s distribution in Emmerich combines broad product availability with a quality filter for the European market, supporting reliable supply and replacement sourcing when required. For robust, repeatable measurements choose the Metav IndustryLine workshop caliper and contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M201.324.1 GTIN: 4054469101460 Manufacturer: Metav IndustryLine Category: Calipers / Measuring instruments Facts Measuring range: 0–400 mm Jaw length: 125 mm Resolution: 0.05 mm (vernier 1/20 mm) Nonius: 1/128" (top), 1/20 mm (bottom) Customs tariff number: 90173000 Materials & special features Material: hardened stainless steel, matt‑chromed scale Monoblock construction Fine‑adjustment thumbwheel Analog vernier scale Conformity: DIN 862 up to 200 mm; factory standard from 250 mm FAQ Is this caliper suitable for heavy workshop use? The Workshop Caliper M201.324.1 from Metav IndustryLine is built as a robust shop instrument, with a monoblock frame and hardened stainless steel surfaces that withstand routine industrial handling. What measurement accuracy and resolution can be expected? The bottom vernier provides a resolution of 0.05 mm (vernier 1/20 mm); the mechanical design prioritises repeatability and durability for workshop-level precision. Which standards apply to this caliper? Shorter jaw configurations follow DIN 862; for the 400 mm version, the caliper is produced in line with the manufacturer's factory standard as indicated in the product specification. What types of measurements does it support? The analogue caliper covers standard external, internal and step measurements typical for workshop calipers, aided by the fine-adjustment thumbwheel for exact setting Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Workshop Precision Caliper With Pointed Jaws, Fine Adjustment, Monoblock, Hardened Stainless Steel - Metav IndustryLine
Take advantage of the combination of monoblock construction, a 400 mm measuring range and a precise fine-adjustment mechanism to secure reliable, repeatable measurements in the workshop. Order the caliper directly via Metav Werkzeuge or ask our consultants for specification support. Workshop caliper M201.334.1 — 400 mm analogue caliper with fine adjustment (Metav IndustryLine) The Workshop caliper M201.334.1 is a medium-range analogue caliper designed for robust shop-floor measurement of components up to 400 mm, featuring a fine-adjustment thumbwheel and hardened stainless-steel construction. 400 mm measuring range for larger components Hardened stainless steel with matt chrome scale Precise fine-adjustment mechanism Monoblock design with 125 mm jaws Dependable medium-range measurement for fixtures and assemblies This caliper is classified in the medium range (measuring range up to 500 mm), making it well suited to general machine‑shop tasks where reach and rigidity must be balanced. The 400 mm span covers typical assembly and component sizes while keeping the instrument manageable for single‑hand operation. The analogue vernier arrangement delivers the industrial standard resolution of 0.05 mm, enabling consistent checks during set‑up and in‑process control that reduce scrap and rework. Built for workshop durability and repeatability Constructed from hardened stainless steel with a matt‑chrome scale, the instrument resists corrosion and maintains legibility under regular use. The monoblock frame increases frame stiffness, so measurements remain reproducible over time and under routine handling. The extended 125 mm jaws provide firm support on deeper features, while the pointed tips allow access to narrow grooves and internal corners. The integrated fine-adjustment wheel ensures rapid, precise positioning of the slider for repeat readings without overshoot. Clear vernier reading and conformity to workshop standards The double vernier layout—top scale 1/128" and lower scale 1/20 mm—facilitates cross‑referencing imperial and metric increments and supports users familiar with both systems. As an analogue instrument the vernier accuracy aligns with the workshop norm of ±0.05 mm under typical conditions, consistent with DIN 862 for jaw lengths up to 200 mm. The mechanical layout is straightforward to read and maintain, making the tool reliable for routine dimensional checks and setup tasks without the need for batteries or electronic interfaces. Practical use and guidance for everyday measurement The instrument is intended for common tasks in metalworking and maintenance: external and internal diameter checks, step measurements and quick on‑machine verifications. Its robust construction tolerates everyday workshop environments while the fine‑adjustment feature speeds up repetitive tasks, improving throughput. For guidance on applying the caliper to specific parts or fixtures, Metav’s technical advisers can provide practical tips tailored to the application. For Metav IndustryLine quality with clear workshop benefits, contact Metav Werkzeuge in Emmerich for personalised advice or to place an order by phone or email. Technical data SKU: M201.334.1 GTIN: 4054469101705 Category: Messschieber Brand: Metav IndustryLine Measurements & accuracy Measuring range: 0–400 mm Jaw length: 125 mm Vernier resolution: 0.05 mm (1/20 mm) Accuracy classification: workshop standard ±0.05 mm Applicable standard: DIN 862 (for jaw length up to 200 mm) Design & special features Material: hardened stainless steel, matt‑chromed scale Monoblock frame construction Fine‑adjustment thumbwheel Pointed measuring tips for narrow features FAQ What is the measuring range of this caliper? The caliper offers a measuring range of 0–400 mm, which places it in the medium class suitable for larger workshop components. How accurate is the vernier on this analogue caliper? The vernier provides a standard workshop resolution of 0.05 mm and corresponds to typical DIN 862 expectations for mechanical calipers. Is the instrument suitable for internal and external measurements? Yes, the Workshop caliper M201.334.1 is designed for external, internal and step measurements, aided by its pointed tips and long jaws. What material is the caliper made from and how does that help in the shop? The body is made from hardened stainless steel with a matt‑chromed scale, offering corrosion resistance and robust durability for daily shop use. Does the caliper include any fine‑adjustment for repeatable readings? Yes, the caliper features a fine‑adjustment thumbwheel that allows controlled slider movement for repeatable positioning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Workshop Precision Caliper Without Probe Fine Adjustment Monoblock Hardened Stainless Steel 0.05mm Vernier, DIN 862 - Metav IndustryLine
Take advantage of a robust monoblock design and precise 0–400 mm measuring range paired with a reliable fine adjustment — ideal for repeatable workshop measurements. Order the instrument directly via Metav Werkzeuge or consult the Metav team for guidance on integrating this caliper into existing quality routines. Workshop Caliper M201.324.2 — 0–400 mm stainless steel, fine adjustment (Metav IndustryLine) Workshop Caliper M201.324.2 is a durable analogue caliper built for accurate, repeatable measurements in industrial and workshop environments up to 400 mm. Monoblock stainless hardened construction Fine adjustment for controlled, repeatable setting Nonius: 1/128" top and 1/20 mm bottom scale Delivered in protective transport case Precision and robustness where it matters The 0–400 mm measuring range classifies this instrument in the Medium (300–500 mm) category, which is sized to handle larger assemblies while remaining manageable for single-person tasks. Constructed from hardened stainless steel with a matt‑chromed scale, the caliper resists corrosion and maintains legibility under workshop conditions. The monoblock frame increases profile stiffness, reducing deformation over the measuring length and improving reproducibility of external and internal measurements in routine production checks. Controlled setting for reliable readings Equipped with a fine adjustment mechanism, the caliper allows the operator to close the jaws smoothly and consistently, reducing variability that typically arises from manual nudging. The analogue nonius layout combines a 1/128" scale on the upper edge with a 1/20 mm scale on the lower edge, yielding a readable mechanical resolution of 0.05 mm, which corresponds to the common industrial performance class for workshop calipers. This format is familiar to experienced users and straightforward to interpret during incoming inspection or set‑up checks. Practical design for everyday workshop use A 150 mm jaw length provides sufficient reach for many workpieces while keeping the instrument compact enough for tight fixtures. The matt finish on the scale reduces glare under bright workshop lighting, aiding quick, error‑free readings. Delivery includes a protective transport case, facilitating safe storage and travel between workstations or job sites, and helping to preserve calibration and surface condition over time. Ready for quality workflows and standards Manufactured to comply with DIN 862 for jaw lengths up to 200 mm, this analogue caliper integrates easily into standard QC procedures and documentation practices. The combination of hardened material, a robust monoblock body and fine adjustment supports consistent measurement throughput, making the instrument a practical choice for workshops that require dependable metrology without the overhead of digital data systems. For a dependable workshop caliper with fine adjustment, contact Metav Werkzeuge to request the Metav IndustryLine Workshop Caliper M201.324.2 — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: M201.324.2 GTIN: 4054469101477 ECLASS: 21170344 Tariff number: 90173000 Facts Measurement range: 0–400 mm Resolution: 0.05 mm (mechanical) Jaw length: 150 mm Nonius: 1/128" (top) / 1/20 mm (bottom) Conforms to DIN 862 for jaw length ≤ 200 mm Special features Material: hardened stainless steel, matt‑chromed scale Monoblock construction for increased stiffness Fine adjustment for controlled closing Analogue nonius scale (no electronic data output) Delivered in a protective plastic or wooden transport case Classified: Medium (300–500 mm) measurement range FAQ Is the caliper supplied ready for immediate use? The Workshop Caliper M201.324.2 is delivered ready for measurement; routine verification is recommended before critical inspections. What accuracy can be expected from this analogue caliper? With a mechanical resolution of 0.05 mm and the specified nonius scales, the caliper meets the typical workshop accuracy class suitable for general machine‑shop and metalworking tasks. Can the instrument be used for internal and external measurements? Yes, the design of the caliper supports external and internal measurements as well as step measurements, consistent with standard analogue caliper functionality. Does the caliper conform to recognised standards? The device is manufactured in accordance with DIN 862 for jaw lengths up to 200 mm and follows the manufacturer’s norms for longer configurations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000mm Digital Caliper Long Jaw 300mm Touchscreen Colour Wireless USB ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of an extra‑long 5,000 mm measuring range, robust hand‑finished jaws and traceable ISO 17025 calibration for reproducible measurements on large components. Order the workshop caliper directly via Metav Werkzeuge or request technical advice from our consultants. Workshop caliper — Microtech Metrology digital caliper with 2.4″ colour touchscreen The Workshop caliper is an extra‑long digital caliper designed for large-format metrology up to 5,000 mm, combining a clear 2.4″ colour touchscreen with Wireless+USB data output for integration into quality workflows. Extra‑long measuring range up to 5,000 mm 2.4″ colour touchscreen for clear readings Wireless+USB data output for traceable logging ISO 17025 calibration and certificate included Measure large components with reproducible precision The extra‑long construction addresses measurements on large workpieces such as heavy housings, long shafts and pipes where profile stiffness and repeatability are critical. With a measuring range reaching 5,000 mm and hand‑finished jaws, the instrument keeps deflection and runout low across its length, so measurements remain comparable even on extended setups. Supplied fully calibrated to ISO 17025, the device is delivered with a traceable calibration certificate, supporting internal audits and a documented quality chain. Reliable numerical output for quality control and process data A resolution of 0.01 mm together with an indicated accuracy of 0.13 mm gives a clear balance between practical workshop requirements and measurable precision. The caliper’s measuring force 1–20 N helps standardise contact pressure to reduce operator‑induced variability, while the Wireless+USB output ensures measurement data can be exported directly to logging systems or SPC software for fast process control. The digital 2.4″ colour touchscreen streamlines reading and reduces transcription errors, improving throughput without compromising the traceability needed in production environments. Built to integrate with workshop routines and large assemblies Long jaw geometry (300 mm jaw length) and rugged construction make this instrument suitable for assembly fixtures and layout benches where reach and durability matter. The large format design is complemented by ergonomic controls and a responsive display for straightforward operation during repetitive checks. Integration into existing documentation routines is simplified by the multiple data interfaces, and the included ISO 17025 certificate removes the immediate need for separate initial calibration, shortening time to first measurement. For heavy‑duty metrology tasks where reproducibility and documented accuracy are required, this caliper is configured to fit directly into shopfloor and inspection workflows. Contact Metav Werkzeuge in Emmerich for a technical quotation or specification matching; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration and delivery options. Technical data SKU: 141050256 GTIN: 4061905454493 Manufacturer: Microtech Metrology Digital display: Colour 2.4″ touchscreen Data output: Wireless+USB Digital: yes ISO 17025 calibration: included Core specifications Measurement range: 0–5,000 mm Resolution (reading): 0.01 mm Accuracy (indicated): 0.13 mm Jaw length: 300 mm Measuring force: 1–20 N Display size: 2.4 inches Features and special functions Hand‑finished jaws Extra‑long caliper for large components Wireless and USB data transfer Delivered with ISO 17025 calibration certificate Suitable for workshop and inspection‑room workflows FAQ What is the maximum measuring range of this caliper? The caliper measures up to 5,000 mm and is designed as an extra‑long instrument for large components; the Microtech Metrology workshop caliper (SKU 141050256) covers this full range. Is the instrument supplied calibrated? Yes, the device is delivered fully calibrated to ISO 17025 with an accompanying calibration certificate for immediate use in traceable quality processes. Which data interfaces are available for integration? Measurement data can be exported via Wireless+USB interfaces to logging or SPC systems for direct documentation of readings. What resolution and accuracy can be expected? The instrument provides a reading resolution of 0.01 mm with an indicated accuracy of 0.13 mm, suited to workshop and inspection tasks where long‑range reproducibility is required. Are the measuring jaws suitable for long‑term shop use? The caliper features hand‑finished jaws and robust construction to withstand repetitive measurements on larger assemblies while maintaining repeatability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500mm Caliper Measuring Jaw Adapter For 5.5mm Jaw Thickness - Metav IndustryLine
Take advantage of a compact, purpose-built accessory that converts standard caliper jaws into a specialised measuring interface: the adapter accepts jaw thicknesses up to 5.5 mm, fits calipers with a measuring range up to 500 mm and mounts on a Ø5 mm fitting for secure attachment. Order the adapter directly via Metav Werkzeuge or consult our specialists for application advice. Caliper jaw adapter (for calipers up to 500 mm) — Metav IndustryLine, Ø5 mounting, 5.5 mm jaw capacity Caliper jaw adapter (for calipers up to 500 mm) is a compact attachment that converts standard caliper jaws into a dedicated measuring interface for medium-range workshop tasks, ideal where quick adaptation is required without changing instruments Fits calipers up to 500 mm Accepts jaw thickness up to 5.5 mm Ø5 mm mounting bore for secure fit Lightweight 50 g for minimal load Consistent precision for medium-range measuring tasks This accessory is engineered as a precision caliper adapter for calipers with a maximum measuring range of 500 mm, placing it in the workshop's medium‑range category. By allowing a defined contact geometry on existing jaws, the adapter reduces variability introduced by improvised fixtures and supports repeatable measurements across production batches. The compact construction and 50 g mass keep the additional load negligible, preserving the instrument's handling and helping to avoid bending or offset errors that can occur with heavier retrofits. Straightforward compatibility and quick fitting The adapter secures onto the caliper jaw via a Ø5 mm mounting interface, a common workshop standard that ensures a tight, concentric fit on compatible jaws. Acceptance of jaw thicknesses up to 5.5 mm means the part suits many standard and robust jaw designs found in industrial and bench calipers. Its role as an attachment for measuring jaws simplifies conversion of an existing analogue instrument into a specialised gauge without the need for new callipers, saving procurement time and reducing downtime in the measuring process. Practical benefits for everyday workshop use Designed as a pragmatic accessory rather than a complete instrument, the adapter enhances workflow by enabling tailored contact forms for specific measurement tasks — for example, reaching into tight grooves or creating a repeatable stop for stepped measurements. The solution supports the shop-floor emphasis on efficiency: one adapted caliper can replace multiple specialised tools, lowering equipment complexity. Traceability and repeatability are improved when the same adapter is used consistently across checks, which is particularly valuable for batch control and fixture set‑ups. Built for durability and predictable handling Although compact, the adapter is manufactured to withstand routine workshop use while maintaining alignment and seat integrity on the caliper jaw. Its low mass minimises influence on the caliper's dynamics during measurement, and the defined mounting geometry reduces play once fitted. As an accessory that complements existing metrology equipment, it contributes to a more organised measurement routine and helps technicians focus on result quality rather than frequent tool changes. Contact Metav Werkzeuge for tailored advice and to obtain the Metav IndustryLine caliper jaw adapter (SKU M240.312) from our Emmerich quality centre Technical data SKU: M240.312 GTIN: 4054469159515 ECLASS: 21131720 Tariff number: 90178090 Weight: 0.05 kg Facts Measuring range compatibility: up to 500 mm Maximum jaw thickness accepted: 5.5 mm Mounting bore: Ø5 mm Mass: 0.05 kg (50 g) Special features Attachment for caliper measuring jaws Suited to analogue calipers Designed for medium-range calipers (up to 500 mm) Compact, lightweight accessory Enables defined contact geometry for repeatable measures FAQ Which calipers are compatible with this adapter? The adapter is compatible with calipers that accept an accessory on a Ø5 mm mounting and have jaw thicknesses up to 5.5 mm; it is intended for calipers with a measuring range up to 500 mm and is supplied as the Metav IndustryLine caliper jaw adapter (SKU M240.312). Can the adapter be used on digital calipers as well as analogue ones? Yes; while the design is intended for analogue calipers, the Metav IndustryLine adapter can be fitted to many digital models provided the jaw geometry and a Ø5 mm mounting are available. Does the adapter affect measurement accuracy? When fitted correctly, the adapter provides a consistent contact geometry that improves repeatability; the low mass (approximately 50 g) minimises influence on the caliper's handling and thus limits additional measurement error. What workshop tasks benefit most from this accessory? The adapter is particularly useful for stepped measurements, internal features accessed via modified jaws and repeat checks where a defined, repeatable contact is required; it adapts standard calipers for medium-range metrology tasks without needing a dedicated gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Digital Caliper 150mm Jaw Length Fine Adjustment Stainless Steel, Factory Standard 0.05mm, With ON/OFF mm/inch Hold Preset - Metav IndustryLine
Benefit from reliable workshop-grade measurement with a 0–500 mm range, a 0.01 mm digital resolution and a hardened stainless‑steel construction that resists wear; the fine‑adjustment thumbwheel ensures repeatable settings for production inspection. Order directly via Metav Werkzeuge or consult our specialists for specification matching. Digital caliper M217.054 — 0–500 mm digital workshop caliper, hardened stainless steel The Digital caliper M217.054 is a medium‑range measuring instrument for accurate external, internal, depth and step measurements in metalworking and general workshop inspection. 0–500 mm measuring range 0.01 mm resolution, digital readout Fine‑adjustment thumbwheel for precise skimming Hardened stainless steel construction Precision and consistency for routine inspection The caliper delivers a clear digital display with a standard 0.01 mm resolution, enabling rapid, verifiable readings that reduce interpretation error compared with analogue scales. The instrument’s fine adjustment thumbwheel controls the sliding action, so each measurement can be positioned consistently; this benefits repetitive tasks such as batch inspection or fixture set‑up. The device is built from hardened stainless steel, improving wear resistance and maintaining geometric stability over extended use, which supports predictable quality control in daily production. Faster workflows with practical digital functions Equipped with an intuitive function set — mm/inch switching, HOLD, PRESET and zeroing at any position — the caliper speeds common shop processes by removing conversion steps and retaining reference points. The concise button set simplifies traceable measurement routines and accelerates go/no‑go checks in assembly lines. Power is supplied by a standard 3 V system, and the display includes on/off and absolute/relative toggles for flexible measurement strategies, improving throughput without sacrificing precision. Designed for real workshop conditions Engineered as a medium‑range instrument, the 0–500 mm format strikes a balance between reach and stiffness: suitable for component work up to sub‑assembly scale while remaining easy to handle for single‑operator tasks. The tool conforms to a factory standard of 0.05 mm, documented on delivery, and comes without a probing tip as specified; the robust construction and ergonomic jaw geometry keep alignment errors low during external and internal checks. The caliper’s concise controls and solid material choice make it a dependable metrology partner for machine shops and maintenance departments. Contact Metav Werkzeuge for application guidance and to secure the Metav IndustryLine digital caliper M217.054 for workshop‑grade precision measurement Technical data Article number: M217.054 GTIN: 4054469110929 Manufacturer: Metav IndustryLine eClass: 21170344 Label: Digital‑Messschieber, 500 x 150 mm, ohne Spitze, Werksnorm 0.05 mm rostfrei, Feineinstellung Facts Measuring range: 0–500 mm Jaw length: 150 mm Resolution: 0.01 mm Power supply: 3 V Factory accuracy: 0.05 mm Digital: yes Special features Material: hardened stainless steel Fine‑adjustment thumbwheel Digital display with ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Data output: RB 5 Conforms to workshop (Werksnorm) calibration standards FAQ What measuring range does this caliper cover? The caliper covers a 0–500 mm range, making it a medium‑range instrument suitable for most workshop and machine‑shop tasks. What is the display resolution and accuracy? The device provides a 0.01 mm display resolution; the factory standard accuracy is stated as 0.05 mm and is documented on delivery. Is the caliper suitable for repeated production checks? Yes. The combination of hardened stainless steel, a fine‑adjustment thumbwheel and repeatable digital zeroing makes the tool well suited to repeated inspection tasks. Which measurement functions are available on the display? The caliper offers mm/inch switching, HOLD, PRESET, absolute/relative zeroing and an ON/OFF function for flexible measurement workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Digital Caliper Fine Adjustment Stainless Steel With 200mm Jaw Length, RB 5 Data Output, Supplied In Case - Metav IndustryLine
Benefit from a workshop-ready combination of a 0–500 mm measuring range, fully hardened stainless-steel construction and precise fine adjustment for repeatable results in medium-format measurement tasks. Order the Digital Caliper directly via Metav Werkzeuge or consult their advisors for application guidance. Digital Caliper M217.054.1 — 0–500 mm, fine adjustment (Metav IndustryLine) The Digital Caliper M217.054.1 is a robust, workshop-grade measuring instrument designed for medium-format inspection and layout work, offering precise sliding control and versatile digital readout for machine shops and toolrooms. 0–500 mm measuring range Fully hardened stainless-steel frame Fine-adjustment slide for exact positioning Digital display with mm/inch and TOL functions Precise medium-range measurement for everyday workshop use This caliper is classified for the "Mittel" range, covering up to 500 mm, which makes it especially suitable for general engineering, fixture construction and mould work where reach and rigidity must be balanced. The instrument provides a resolution of 0.01 mm, enabling standard digital accuracy on the shop floor, while the declared factory standard 0.05 mm sets an expected tolerance for routine quality checks. The longer measuring span compared with compact models increases versatility without compromising handling, so single-operator checks on assemblies and housings become efficient and consistent. Faster data capture and operator-friendly functions to speed production Equipped with a clear digital display and multi-function keys (ON/OFF, mm/inch, ABS/0, HOLD, TOL and PRESET), the caliper supports quick conversion and tolerance checks at the point of measurement. A dedicated data output (RB 5) is provided for capturing readings into inspection systems or SPC workflows, simplifying documentation and reducing transcription errors. These features combine to lower cycle time in repetitive measurement tasks and to integrate measurement steps directly into production control. Robust build and controlled contact for repeatable readings The sliding frame is made from fully hardened stainless steel, offering wear resistance and corrosion protection for workshop environments. A fine-adjustment mechanism ensures delicate, reproducible closing of the jaws, while the 200 mm jaw length improves stability on larger workpieces. The instrument runs from a 3 V power source and is supplied to a factory standard; mechanical design and controlled sliding help to minimise operator-induced variation during external, internal and step measurements, so measurements remain trustworthy across shifts. For dependable medium-range precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for a suitability check and rapid supply tailored to the workshop’s needs. Technical Data SKU: M217.054.1 GTIN: 4054469110936 eClass: 21170344 Article label: Digital caliper, 0–500 mm, without probe, factory standard 0.05 mm Numbers / Core technical data Measuring range: 0–500 mm Resolution: 0.01 mm Jaw length: 200 mm Power: 3 V Special features / Materials Material: stainless steel, fully hardened Fine adjustment slide Digital readout with ON/OFF, mm/inch, ABS/0, HOLD, TOL, PRESET Data output: RB 5 Norm: factory standard 0.05 mm FAQ Is this caliper suitable for general machine-shop measurement tasks? This caliper is intended for medium-format workshop measurement; the Digital Caliper M217.054.1 offers a 0–500 mm range and features that match common machine-shop and mould-making inspection needs. What accuracy and resolution can be expected from this instrument? The instrument provides a resolution of 0.01 mm and is supplied to a factory standard of 0.05 mm, which defines the typical tolerance for routine checks. Can measurement data be transferred directly to a PC or SPC system? Yes, the caliper includes a data output (RB 5) to enable direct transfer of readings into collection systems or software for traceable records. Does the caliper require a special power supply? The caliper operates from a standard 3 V battery; no special power unit is needed for normal workshop use. What advantages does the fine-adjustment slide provide? The fine-adjustment mechanism permits controlled closing of the jaws for repeatable seating and improved measurement consistency on delicate or precision parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Digital Caliper With 100mm Jaw, Fine Adjustment, Stainless Steel, 0.01mm Resolution, Supplied In Case - Metav IndustryLine
Take advantage of the combination of hardened stainless steel construction, a 0–500 mm measuring range and a 0.01 mm digital resolution for repeatable, workshop-ready measurements. Order the Digital Caliper M217.064 directly via Metav Werkzeuge or contact our consultants for specification advice and stock information. Digital Caliper M217.064 — 0–500 mm, hardened stainless steel, fine adjustment (Metav IndustryLine) The Digital Caliper M217.064 is a medium-range digital caliper engineered for routine and precision tasks in machine and metal workshops, offering a balanced reach with controlled stiffness and a dedicated fine‑adjustment mechanism. Medium-range 0–500 mm measuring span Hardened stainless steel construction Digital display with mm/inch and TOL functions Fine-adjustment thumbwheel for controlled moves Consistent medium-range precision for everyday workshop use This caliper is classified as a medium-range instrument (measuring range up to 300–500 mm) and is aimed at operations that require both reach and rigidity. The 0–500 mm span provides the reach needed for components such as housings, mounting fixtures and medium-sized assemblies while keeping the profile stiff enough for reproducible results. The combination of a robust frame and controlled measuring slides ensures that a single operator can achieve steady readings across typical shop tasks, reducing rework and inspection time. Digital functionality that supports traceability and quick decisions Equipped with a clear digital display and the standard control set (ON/OFF, mm/inch, 0/ABS, HOLD, TOL and PRESET), this measuring instrument converts raw measurement into actionable data quickly. The readout offers 0.01 mm resolution (0.0005 in), enabling detailed checks without complex setups. An RB 5 data output is provided for integration into data-collection workflows, allowing measurement logging with compatible interfaces. The straightforward controls speed up repetitive checks and make pass/fail decisions intuitive on the shop floor. Durable construction and fine‑adjustment for repeatable results Manufactured from hardened stainless steel, the caliper resists wear and remains stable under daily use. The integrated fine-adjustment thumbwheel assists precise jaw positioning, so delicate parts and narrow tolerances are handled without overshoot. The instrument is delivered to factory standard with a factory tolerance of 0.04 mm, which ensures consistent baseline quality for production and inspection tasks. These features together reduce measurement scatter and support stable quality control across batches. Choose the Metav IndustryLine Digital Caliper M217.064 for reliable medium-range measurement; contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for technical guidance and availability in your region Technical Data Article number: M217.064 GTIN: 4054469111117 ECLASS: 21170344 Category: Calipers Facts Measuring range: 0–500 mm Resolution: 0.01 mm / 0.0005 in Power: 3 V Factory tolerance: 0.04 mm Data output: RB 5 Special features Material: hardened stainless steel Fine-adjustment thumbwheel Digital display with ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Measuring system: digital FAQ Is the caliper delivered calibrated? The Digital Caliper M217.064 is supplied with factory calibration to a tolerance of 0.04 mm; no ISO 17025 certificate is provided as part of the standard delivery. What resolution and units does the instrument use? The display provides a 0.01 mm resolution and 0.0005 in in imperial mode; unit switching is available via the mm/inch function. What material is the caliper made from and how durable is it? The instrument is made from hardened stainless steel, designed for regular workshop use with high resistance to wear and stable dimensional behaviour. Can measurement data be transferred to a PC or data logger? Measurement values can be output via the unit’s RB 5 data interface; connection requires a compatible cable or interface module for the receiving system. Which applications suit this caliper best? This model is intended for medium-range inspection and measuring tasks in machine and metalworking environments—ideal for fixtures, housings and general workshop quality control using the Digital Caliper M217.064. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Digital Caliper With 100mm Movable Jaw, Fine Adjustment, Stainless Steel, Plastic Case - Metav IndustryLine
Take advantage of the combination of 500 mm measurement reach, robust stainless hardened construction and a digital interface (RB 2) for streamlined quality documentation; order the instrument directly via Metav Werkzeuge or contact our consultants for tailored advice. Digital Caliper M217.250 — 500 mm range with fine adjustment (Metav IndustryLine) The Digital Caliper M217.250 is a 500 mm digital measuring instrument with a movable 100 mm jaw and fine-adjustment slide, designed for workshop metrology and medium‑sized component inspection. 500 mm measurement range, robust design Fine-adjustment slide for precise positioning Stainless hardened construction for durability Digital display with mm/inch and data output RB 2 Medium-range reach with workshop-grade precision Classified as a medium-range caliper (measuring up to 500 mm), this instrument balances reach and stiffness to deliver reproducible results on larger fixtures, housings and mounting interfaces. The digital readout offers a resolution of 0.01 mm, which is the standard for many inspection routines and provides clear, comparable values for process control. The combination of reach and readable resolution simplifies tasks where longer jaws are required but excessive flex would otherwise reduce repeatability. Fine-adjustment and rugged materials for repeatable handling Equipped with a fine-adjustment slide and a movable 100 mm jaw, the instrument enables controlled approach to contact points and tiny positional corrections without overshoot. Constructed from stainless hardened steel, the caliper resists wear and corrosion while maintaining the profile accuracy of the measuring faces. These design choices reduce measurement variation over time and ensure that routine workshop handling does not degrade the tool’s performance. Digital functions that integrate with quality workflows The instrument’s digital display includes on/off, mm/inch, ZERO (ABS) and PRESET functions for flexible reading and quick set‑ups. For traceable data collection, the caliper provides a RB 2 data interface that can be connected to data loggers or quality‑control software, allowing direct transfer of measured values and reducing transcription errors. The electronic feature set supports efficient documentation and speeds up sampling during incoming inspection or in‑process checks. Factory standard delivery and practical applications Supplied to a factory standard (Werksnorm), the caliper is intended for everyday metrology in machine shops, toolrooms and quality departments where medium‑sized components are common. Typical uses include checking bore spacings on assemblies, verifying external dimensions of housings and setting up fixtures. The robust construction and digital connectivity make the instrument suitable as a workshop reference tool for production and maintenance operations. Contact Metav Werkzeuge in Emmerich to discuss how the Metav IndustryLine M217.250 can be integrated into your inspection process or to arrange supply and technical consultation Technical data Article number: M217.250 GTIN: 4054469111285 SKU: M217.250 Brand: Metav IndustryLine Material: stainless hardened steel Standard: Werksnorm eClass: 21170344 Customs tariff: 90173000 Facts Measurement range: 0–500 mm Resolution (display): 0.01 mm Resolution (inch): 0.0005 in Jaw length: 100 mm Data output: RB 2 Special features Digital functions: on/off, mm/inch, ZERO (ABS), PRESET Fine-adjustment slide for controlled positioning Movable measuring jaw for extended contact geometry Suitable for workshop and toolroom metrology FAQ Is the M217.250 suitable for workshops that require longer measuring ranges? The M217.250 is intended for medium‑range tasks up to 500 mm and combines sufficient reach with stiffness for reliable shop measurements. What resolution and display options does the caliper provide? The instrument offers a display resolution of 0.01 mm and an inch resolution of 0.0005 in; the display supports mm/inch switching, ZERO (ABS) and PRESET operations. Can measurement data be exported directly from the caliper? Yes. The caliper provides a RB 2 data interface for direct transfer of measured values to data loggers or quality systems. What construction materials ensure durability for daily use? The tool is made from stainless hardened steel, offering wear resistance and corrosion protection suited to frequent workshop handling. Is the caliper delivered calibrated to a specific standard? The instrument is supplied to factory standard (Werksnorm); the delivery does not state an ISO 17025 calibration certificate. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Digital Caliper With 150mm Blade, Cross/Knife Jaws 45mm, Fine Adjustment, Factory Standard 0.05mm - Metav IndustryLine
The combination of a 0–500 mm measurement range, a 0.01 mm digital resolution and a hardened stainless steel construction ensures dependable, repeatable workshop measurements with precise positioning via fine adjustment; order the caliper directly via Metav Werkzeuge or consult our specialists for specification support. Digital caliper M217.024 — 0–500 mm, hardened stainless steel, fine adjustment (Metav IndustryLine) The Digital caliper M217.024 is a workshop-grade 0–500 mm measuring instrument with knife-type jaws and cross points, designed for accurate positioning and versatile measurement tasks in machine and metalwork environments 0–500 mm measurement range 0.01 mm digital resolution Hardened stainless steel construction Fine adjustment for exact positioning Precision that speeds up quality checks and reduces rework The caliper combines a 0.01 mm digital readout with a factory tolerance of 0.05 mm, providing a clear, verifiable basis for everyday inspection and set-up tasks. The high-contrast display and quick mm/inch conversion reduce cycle times during incoming inspection or in-process checks; the 0.01 mm resolution supports standard workshop quality control while the Werksnorm 0.05 mm indicates the expected reproducibility under normal workshop conditions. This makes the instrument an efficient tool for production environments where fast, traceable measurements matter. Robust build and jaw geometry for varied profiles Constructed from hardened stainless steel, the slide and jaws are designed for long-term durability in demanding shop conditions. The combination of knife-type jaws and cross points (45 mm) provides practical versatility: the knife geometry is useful when measuring thin or profiled edges, while the cross points assist with small recesses and grooves. The integrated fine adjustment mechanism allows controlled, reproducible closing of the jaws, lowering the risk of measurement error caused by overshoot and enabling accurate seating on delicate workpieces. Digital functions engineered for integration and repeatability The caliper’s display offers practical functions — mm/inch, 0/ABS, HOLD, TOL and PRESET — which simplify comparative checks, data capture and tolerance inspections at the bench. A dedicated RB 5 data output is provided for connection to data loggers or inspection software, supporting digital documentation and quality traceability. These features combine to reduce manual transcription errors and speed up inspection workflows while keeping measurement records consistent and auditable. Designed for workshop use and backed by Metav competence Classified as a Mittel-range instrument (0–500 mm), this caliper covers the most common workshop tasks while balancing reach and rigidity for reliable single-handed handling. Supplied by Metav IndustryLine, the product is supported by Metav Werkzeuge’s European distribution and quality filter in Emmerich, ensuring consistent supply and specialist advice. Metav’s experience in democratising precision equipment means straightforward access to measurement tools that perform reliably across industry, trade and technical retail. For reliable 0–500 mm workshop measurement and guidance on integrating the caliper into inspection routines, contact Metav Werkzeuge for product advice and local supply from Emmerich Technical data SKU: M217.024 GTIN: 4054469110752 Eclass: 21170344 Customs tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Measurement range: 0–500 mm Resolution: 0.01 mm / 0.0005 in Jaw length: 150 mm Weight: 1.4 kg Factory tolerance / norm: 0.05 mm Special features Material: hardened stainless steel Fine adjustment for precise jaw movement Knife-type jaws and cross points, 45 mm Digital display with ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Data output: RB 5 FAQ What accuracy can be expected from the caliper in daily use? The caliper offers a display resolution of 0.01 mm and is supplied to a factory tolerance of 0.05 mm, which provides dependable repeatability for standard workshop measurements using the Digital caliper M217.024. Is the instrument suitable for measuring thin-walled or profiled parts? Yes, the knife-type jaws and cross points (45 mm) make the device suitable for thin sections and profiled edges; the fine adjustment helps achieve consistent contact without damaging delicate surfaces. Can measurement data be exported to a PC or data logger? The instrument provides an RB 5 data output for direct connection to compatible data acquisition systems, enabling straightforward digital documentation of measurement results. Does the caliper require a special calibration certificate? The M217.024 is delivered to factory standard with the stated tolerance; if an accredited calibration certificate is required, please consult Metav Werkzeuge for available calibration options and traceability services. What workshop applications is this caliper best suited to? With a 0–500 mm range and robust stainless construction, the caliper is ideal for general machine and metalwork tasks, fixtures and medium‑sized components where reach and stiffness must be balanced. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Digital Caliper With 150mm Jaw Length, Cross Tips, Fine Adjustment, Stainless Steel, IP54 - Metav IndustryLine
Combining a robust stainless hardened construction, precise fine‑adjustment cross‑point jaws and a 500 mm measuring range, this digital caliper delivers reproducible medium‑range measurements for workshop and fixture work; benefit from clear digital readout and factory standard accuracy of 0.05 mm. Order directly via Metav Werkzeuge or request advice from our consultants for process integration. Digital Caliper M217.034 — 0–500 mm, cross‑point jaws, fine adjustment The Digital Caliper M217.034 is a medium‑range electronic measuring instrument designed for reliable component measurement in machine shops, jig and fixture assembly and quality control tasks. 0–500 mm measuring range for medium parts Fine‑adjustment mechanism for repeatable readings Hardened stainless construction for long life Digital display with mm/inch, ABS and preset Accurate medium‑range measurements for everyday workshop use The 0–500 mm measuring span places this instrument in the medium category, offering the best compromise between reach and stiffness for general machine‑shop use. With a clear digital display and standard 0.01 mm resolution, the caliper supports fast inspection and setting tasks while the factory accuracy of 0.05 mm gives a predictable tolerance band for routine QC. This combination reduces rework and shortens inspection cycles, improving throughput without complex procedures. Electronic functions that support traceability and workflow Equipped with a multi‑function display (mm/inch, ABS/0, HOLD, TOL and PRESET) and RB 5 data output, the instrument facilitates documented measurement and integration into inspection routines. The preset and tolerance features speed up comparative checks, while the HOLD function simplifies reading awkward measurements. These electronic aids convert manual measuring into an efficient, auditable step within a larger production or QA process. Mechanical design focused on reproducibility and durability Manufactured from fully hardened stainless steel, the caliper resists typical workshop wear and preserves jaw geometry over time. The cross‑point jaws provide a defined contact for small grooves and bores, and the fine‑adjustment control allows micro‑corrections without disturbing the setup. Such mechanical decisions ensure that measurements remain reproducible across repeated use, which is essential for assembly and inspection tasks where consistency matters. Practical benefits for procurement and workshop teams As a medium‑range digital caliper, this instrument reduces the number of separate gauges required for parts up to 500 mm, freeing up bench space and simplifying tool management. The electronic readout and data output support modern quality processes, while the hardened construction limits downtime caused by damaged jaws or corrosion. For buyers seeking measurable efficiency gains, this tool represents a pragmatic balance of durability, usability and measuring performance. For process enquiries or to discuss how the M217.034 fits specific workshop requirements, contact Metav Werkzeuge for technical guidance and tailored procurement assistance via info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: M217.034 GTIN: 4054469110783 EClass: 21170344 Facts Measuring range: 0–500 mm Resolution (display): 0.01 mm Display functions: mm/inch, ABS/0, HOLD, TOL, PRESET, ON/OFF Accuracy (factory standard): 0.05 mm Jaw length: 150 mm Data output: RB 5 Material: stainless steel, fully hardened Special features Cross‑point jaws Fine‑adjustment mechanism Digital caliper with multifunction display FAQ Is the caliper delivered with a calibration certificate? The caliper is supplied to factory standard with stated accuracy of 0.05 mm; a factory calibration record accompanies the instrument. What measuring range and resolution are provided? The M217.034 covers 0–500 mm with a display resolution of 0.01 mm and factory accuracy rated at 0.05 mm. Can measurement data be exported to inspection software? Yes — the instrument provides an RB 5 data output suitable for connection to data collection or inspection systems. Are the jaws suitable for internal and depth measurements? The cross‑point jaws and the caliper’s sliding depth function enable internal, external and depth measuring tasks for components within the medium range. Is this caliper suitable for use in a production quality‑control station? Designed for workshop and QC use, the M217.034 offers repeatable readings, digital functions for traceability and a hardened stainless design for durability in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Digital Precision Caliper With 0.1mm Resolution, Aluminium Profile, mm/inch Display - Metav IndustryLine
The combination of a 0–500 mm measuring range, a digital display with mm/inch conversion and a light aluminium profile delivers robust, workshop-ready performance and straightforward handling; order the M217.214 workshop caliper directly via Metav Werkzeuge or ask our consultants if needed. M217.214 — Workshop caliper with digital readout and 0–500 mm range The M217.214 is a digital workshop caliper designed for medium-range measurements up to 500 mm, combining an aluminium profile with a clear mm/inch display for precise, efficient everyday use Aluminium profile construction for workshop use Digital display with mm/inch and ZERO functions Measuring range 0–500 mm for medium assemblies Jaw length 150 mm for secure workpiece contact Precise measuring capability for everyday workshop tasks The caliper’s 0–500 mm range places it in the medium class, ideal for machine‑ and toolmaking tasks where reach and rigidity must be balanced. The digital display simplifies repeated measurements and reduces reading errors compared with a manual scale, while the resolution of 0.1 mm (display) gives a clear numeric result for routine checks and setup work. This combination supports efficient quality control and shortens inspection times, making measurement workflows more reliable and less error‑prone. Ergonomic design that reduces handling time Built with an aluminium profile, the instrument is light enough for single‑hand operation yet sufficiently rigid for stable measuring over its entire span. The extended jaw length of 150 mm ensures a secure grip on larger edges and profiles during external measurements. The display unit includes ON/OFF, mm/inch and ZERO functions, enabling quick unit changes and relative measurements without interrupting the process, which improves throughput in mixed‑unit environments. Practical suitability and workshop resilience Constructed to workshop standards and delivered under the manufacturer’s works standard (Werksnorm), the caliper is intended for routine industrial and maintenance use rather than ultra‑fine laboratory metrology. The RB 1 data output allows integration with measurement logging setups where compatible, helping to streamline documentation and traceability in production or service operations. The overall package is aimed at trades and workshop teams that require dependable, repeatable measurements across a variety of components. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine M217.214 into existing inspection routines and for reliable supply from Emmerich: call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M217.214 Manufacturer: Metav IndustryLine Material: Aluminium profile Norm: Werksnorm Tariff number: 90173000 eClass: 21170344 Data Measuring range: 0–500 mm Resolution (metric): 0.1 mm Resolution (inch): 0.01 in Jaw length: 150 mm Data output: RB 1 Special features Digital display with ON/OFF, mm/inch and ZERO button Medium‑range caliper (suitable for machine and toolmaking) Robust aluminium construction for workshop use Delivered under manufacturer works standard (Werksnorm) FAQ What measurement range does this caliper cover? The M217.214 covers a measuring range from 0 to 500 mm, classifying it as a medium‑range caliper suitable for larger workshop components. What readout and functions are available on the display? The workshop caliper features a digital display with ON/OFF, mm/inch conversion and a ZERO function to support relative measurements and quick unit changes. Is the caliper suitable for routine industrial use? Yes — the M217.214 is designed for workshop and industrial tasks, offering a balance of reach and stiffness for machine‑shop and maintenance applications. Can measurement data be exported to a logging system? The caliper provides an RB 1 data output, enabling connection to compatible data capture systems for traceability and documentation. What material is the caliper made from and how does that help in the workshop? The body is an aluminium profile, which keeps the instrument lightweight for handling while retaining sufficient rigidity for reproducible measurements across its span. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Precision Caliper Long Jaw 2.4" Colour Touchscreen Wireless/USB ISO 17025 Calibrated - Microtech Metrology
Reliable workshop measurement with a 0–500 mm measuring range, a 0.01 mm display resolution and full ISO 17025 calibration with certificate — take advantage of robust medium‑range capability and high data connectivity; order the workshop caliper directly via Metav Werkzeuge or ask our consultants for tailored advice. Workshop caliper — 0–500 mm range, 2.4" colour touchscreen (Microtech Metrology) Workshop caliper for medium‑range metrology in toolrooms and production control, offering wired and wireless data transfer and factory ISO 17025 calibration. 0–500 mm medium-range capacity 0.01 mm digital resolution ISO 17025 calibration with certificate Wireless and USB data output Consistent, measurable precision for daily quality control The instrument delivers a clear 0.01 mm readout on a 2.4" colour touchscreen, which supports quick interpretation and fewer transcription errors during batch inspections. The integrated fine adjustment mechanism and handmade measuring jaws reduce slippage and permit controlled contact with the workpiece; the specified 1–20 N measuring force range helps to maintain repeatable results when different operators handle the device. These design choices translate into faster setup times and a lower rate of rework in routine workshop measurement tasks. Seamless data capture and traceable calibration Data export via Wireless+USB enables direct input to inspection software or spreadsheets, removing manual entry and shortening reporting cycles. The tool is delivered fully calibrated to ISO 17025, inclusive of a calibration certificate, which provides traceability for internal audits and customer reports. The combination of a tactile display and modern connectivity supports integration into quality workflows, making documentation straightforward and reducing administrative overhead during compliance checks. Medium‑range versatility and practical handling benefits Classified for the medium measurement class (suitable for components up to 500 mm), this caliper balances reach and rigidity for common workshop tasks such as checking bearings, housings or fixture components. A 150 mm long jaw enables deeper reach for recessed features while keeping the instrument manageable in one hand. Robust construction and focused ergonomics mean the device is ready for day‑to‑day use in metalworking and general assembly shops, helping workshops consolidate measuring tasks on a single, traceable instrument. For traceable, workshop‑ready measurement solutions contact Metav Werkzeuge in Emmerich to discuss procurement, calibration documentation and system integration for the Microtech Metrology workshop caliper — technical consultants are available to assist. Technical data Article number: 141005226 GTIN: 4061905038853 Manufacturer: Microtech Metrology Numbers / Core technical data Measuring range: 0–500 mm Resolution: 0.01 mm Measuring force: 1–20 N Jaw length: 150 mm Display: 2.4" colour touchscreen Special features / Versions Digital caliper with Wireless+USB data output Fine adjustment for controlled contact Handmade measuring jaws Delivered calibrated to ISO 17025 with certificate Suitable for workshop and toolroom applications FAQ Is the caliper supplied with a calibration certificate? Yes. The workshop caliper is delivered fully calibrated to ISO 17025 and includes a calibration certificate for traceability and audit purposes. What resolution and display does the instrument offer? The device provides a digital resolution of 0.01 mm shown on a 2.4" colour touchscreen, designed for clear readout and reduced transcription errors. Which data interfaces are available for export? Measurements can be exported via Wireless and USB interfaces, enabling direct transfer to inspection software or data logging systems. Can the caliper measure recessed features or deeper bores? Yes. The extended 150 mm jaw length increases reach for deeper or recessed measurements while remaining practical for workshop handling. Is the measuring force adjustable and why does it matter? The instrument specifies a measuring force range of 1–20 N; controlled contact reduces operator‑induced variation and helps produce repeatable measurements across different users. What applications suit the 0–500 mm range? The medium‑range classification covers common workshop and toolroom tasks such as checking housings, bearings, fixtures and medium‑sized components where a balance of reach and stiffness is required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500mm Precision Caliper Long Jaw, Colour 2.4" Touchscreen, ISO 17025 Calibrated - Microtech Metrology
Combining ISO 17025 calibration, a 0–500 mm measuring range and Wireless+USB data output, this instrument delivers traceable results and straightforward integration into inspection workflows. Order the workshop caliper directly via Metav Werkzeuge or ask our consultants if needed. Workshop caliper — Digital 0–500 mm range, ISO 17025‑calibrated (Microtech Metrology) The Workshop caliper is a digital measuring instrument designed for medium‑range inspection tasks in toolrooms, fixture making and mould construction, offering a balance of reach and stiffness for repeatable measurements. ISO 17025 calibration included Measuring range 0–500 mm Colour 2.4" touchscreen display Wireless and USB data output Precision tailored for mid‑range components Classified for the medium measurement class, this digital instrument covers 0–500 mm, making it well suited for common workshop tasks where reach and rigidity must be balanced. The device reads to 0.01 mm, which supports standard industrial quality control and workshop measurement requirements. The built‑in fine adjustment and a controllable measuring force between 1–20 N reduce operator influence during contact measurements, improving repeatability. Hand‑finished jaws guarantee proper seating on measured surfaces, so measurements of housings, fixtures and brackets remain consistent without excessive setup time. Faster inspection through integrated data capture A clear 2.4" touchscreen provides intuitive numeric readout and simple menu navigation, while Wireless+USB connectivity enables direct transfer of measurement values into spreadsheets or inspection software. This reduces transcription errors and streamlines traceability in batch inspections. The combination of a digital display and digital data output supports modern shopfloor workflows and accelerates reporting, making the device a practical tool for incoming inspection, assembly checks and routine maintenance documentation. Built for workshop durability and repeatability Robust construction and hand‑finished measuring jaws deliver reliable contact geometry across extended use. The 300 mm long jaw increases reach for deeper recesses and larger components without sacrificing stability. Components subject to frequent handling benefit from the instrument’s solid build and user‑oriented controls; the fine adjustment mechanism helps to position the jaws delicately for fragile or sensitive parts. Supplied fully calibrated, the caliper includes an ISO 17025 calibration certificate, ensuring that results are traceable and accepted in formal quality processes. Practical applications and compatibility The caliper is suitable for a broad range of workshop applications, from toolroom adjustments and small‑batch quality checks to assembly inspections in mould and fixture production. Its digital output simplifies integration with measurement data collection systems commonly used in production and quality departments. As a mid‑range measuring device, it provides the reach required for medium‑sized components while remaining manageable for single‑operator use, helping to maintain throughput without compromising on accuracy. For traceable mid‑range measurement and reliable integration into inspection routines, secure the ISO 17025‑calibrated Microtech digital caliper via Metav Werkzeuge or request specialist advice from the Emmerich team. Technical data Article number: 141005256 GTIN: 4061905038877 Manufacturer: Microtech Metrology Facts Measuring range: 0–500 mm Reading resolution: 0.01 mm Jaw length: 300 mm Measuring force: 1–20 N Display size: 2.4" colour touchscreen Special features ISO 17025 calibration certificate included Wireless + USB data output Fine adjustment mechanism Hand‑finished measuring jaws Digital caliper, medium‑range class FAQ What measuring range does this caliper cover? The workshop caliper covers a measuring range of 0–500 mm, classified for medium‑range tasks and offering a practical balance of reach and stiffness for workshop and production checks. Is the instrument delivered calibrated? Yes — the caliper is supplied fully calibrated to ISO 17025 and includes a calibration certificate for traceable results. How are measurement values transferred from the device? Measurement values can be exported via Wireless+USB; the colour 2.4" touchscreen also shows live readings for immediate logging and manual verification. What is the resolution and why does it matter? The display reads in 0.01 mm steps, which supports standard workshop quality control and provides sufficient detail for typical assembly and inspection tasks. Which applications suit this caliper best? The digital caliper is ideal for toolroom inspection, mould and fixture checks, component assembly verification and routine quality control where medium‑range measurements are required; reference: Microtech Metrology digital caliper, SKU 141005256. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500mm Precision Caliper Workshop Jawless, Fine Adjustment, Monoblock 150mm Jaws, Hardened Stainless Steel, DIN 862, Supplied in Case - Metav IndustryLine
A robust monoblock vernier with hardened stainless-steel construction and a fine-adjustment screw delivers stable, repeatable readings across a 0–500 mm span; the instrument’s 0.05 mm graduations align with industrial shop tolerances while the 150 mm jaw length reaches recessed features reliably. Order the caliper directly via Metav Werkzeuge or ask our consultants if needed. Workshop Vernier Caliper M201.325 — 0–500 mm, hardened stainless steel, fine adjustment (Metav IndustryLine) the Workshop Vernier Caliper M201.325 is an analogue, monoblock caliper designed for medium-range workshop measurement tasks where durability and steady handling are essential 0–500 mm measuring range for medium components Hardened stainless steel with matt-chromed scale Fine-adjustment screw for precise locking Monoblock beam for improved stiffness Built for medium-range workshop measurement and repeatability The caliper is classified in the medium measuring-range category (max. 300–500 mm), making it suitable for fixtures, housings and larger assemblies that still require single-handed handling. The monoblock beam design improves profile stiffness and reduces deflection over longer spans, which supports reproducible measurements in everyday production. Hardened stainless steel and a matt-chromed scale combine wear resistance with legible graduations, so readability and longevity remain high even under workshop conditions. Vernier accuracy that matches industrial expectations This analogue instrument uses a vernier arrangement that provides a reading step equivalent to 0.05 mm (metric vernier) and a secondary imperial division on the upper scale; this resolution corresponds to the common industrial standard for mechanical shop work. Compliance with DIN 862 is ensured for jaw lengths up to 200 mm, with larger lengths produced to a factory standard; the result is a straightforward classification of measurement uncertainty that technicians recognise and trust during quality checks and setup procedures. Design elements that reduce user error and improve handling A dedicated fine-adjustment screw permits controlled approach and firm locking without sudden slippage, which reduces overshoot and settling errors when aligning jaws. The 150 mm jaw length provides extended reach for deeper internal and external features while preserving rigidity. The combination of a clearly graduated scale and a smooth vernier slide lowers the influence of handling variations, so measurement cycles are faster and the rate of re-work is reduced. Durable construction and practical integration into the workshop The instrument’s construction emphasises practical durability: hardened materials, corrosion-resistant finish and robust slide mechanics minimise maintenance needs and downtime. At a substantive build weight the caliper remains comfortable to guide and is well suited to bench or on-machine inspection routines. The tool integrates naturally into standard shop workflows, supporting rapid checks at the lathe, milling machine or assembly station and helping to maintain a consistent production flow. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine M201.325 and to arrange delivery or specification clarification Technical data SKU: M201.325 GTIN: 4054469101491 Category: Calipers / Vernier caliper Facts Measuring range: 0–500 mm Jaw length: 150 mm Weight: 3 kg Resolution (vernier): 0.05 mm Special features Material: hardened stainless steel, matt-chromed scale Fine-adjustment screw Monoblock beam design Analogue vernier with dual-scale (metric and imperial) Conformity: DIN 862 up to 200 mm, above 250 mm to factory standard FAQ What measuring range does this caliper cover? The Metav IndustryLine Workshop Vernier Caliper M201.325 covers a measuring range of 0–500 mm, placing it in the medium-range class for workshop and machine-shop tasks. What resolution and accuracy can be expected? Readings are taken from the analogue vernier with a metric step of 0.05 mm; this corresponds to standard analogue caliper practice and aligns with industrial shop tolerances described under DIN 862 for the applicable sizes. What materials and finishes are used? The instrument is made from hardened stainless steel with a matt-chromed scale to resist wear and corrosion while keeping graduations legible throughout regular use. How does the fine-adjustment screw improve measurements? The fine-adjustment screw enables controlled closing and secure locking of the jaws, reducing slip and enabling reproducible placement when measuring small features or making repeated checks. Which workshop tasks is this caliper best suited to? The caliper is ideal for medium-sized components such as fixtures, housings and typical machine parts where a combination of reach, stiffness and single-handed operation is required; it integrates well with bench, lathe and milling-machine inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Precision Digital Caliper With 150mm Depth Rods, Fine Adjustment, Stainless Steel, ISO Calibration Box - Metav IndustryLine
Take advantage of the combination of a 0–500 mm measuring range, 0.01 mm resolution and a hardened stainless-steel build for dependable medium‑range inspection tasks; order the instrument directly from Metav Werkzeuge or consult our specialists for application advice. Digital Caliper M217.044 – 0–500 mm range, fine‑adjustment, pointed jaws (Metav IndustryLine) The Digital Caliper M217.044 is a medium‑range precision measuring instrument designed for workshop and fixture tasks, offering fine‑adjustment control and pointed jaws for reliable internal and external measurements. Digital display with mm/inch and TOL functions Hardened stainless-steel construction Fine-adjustment thumbwheel for precise closing 0–500 mm range for medium-sized components Precision where reach and stiffness meet The caliper is tailored to medium‑range applications, offering a 0–500 mm measuring span that balances reach with structural rigidity. This medium classification makes it suitable for measuring larger fixtures, housings and clamping elements while remaining easy to handle single‑handed. Thanks to the fully hardened stainless‑steel slideway and jaws, the instrument resists wear and maintains dimensional stability over time, which supports reproducible results in production and inspection environments. The factory standard Werksnorm 0.05 mm provides a clear baseline for expected performance during routine checks. Efficient digital functions that speed up inspection A multi‑function digital display simplifies common tasks: switch between millimetres and inches, set zero/absolute references, store presets and use the tolerance (TOL) and hold features for quick decision making during series inspection. The display’s 0.01 mm resolution allows standard quality‑control tasks to be completed rapidly and with confidence; the caliper runs from a 3 V supply and includes a preset function that reduces setup time when repeating measurements. The integrated fine‑adjustment thumbwheel gives controlled closing motion, improving repeatability compared with coarse sliding and helping to avoid overshoot on delicate components. Robust handling and workshop suitability Designed for everyday use, the instrument combines a long jaw length with pointed jaws to access narrow bores and stepped features. The hardened material and thoughtful ergonomics keep the tool serviceable under shop conditions, while a well‑balanced weight (approximately 1.25 kg) lends stable handling during careful measurements. The construction reduces susceptibility to bending and wear, so maintenance intervals are extended and the caliper remains a dependable part of routine inspection processes. Clear benefits for production and quality control The combination of a wide measuring range, fine‑adjustment control and a user‑friendly digital interface reduces cycle time on inspection routines and lowers the risk of measurement error. In production contexts where repeatability and throughput matter, the instrument streamlines checks on assemblies and tooling components, contributing to consistent product quality and fewer rework loops. Contact Metav Werkzeuge today for tailored advice on the Metav IndustryLine Digital Caliper M217.044 and secure a workshop‑ready measuring solution that matches production needs. Technical data Article number: M217.044 GTIN: 4054469110820 Manufacturer: Metav IndustryLine Core technical figures Measuring range: 0–500 mm Resolution: 0.01 mm (0.0005 in) Factory standard: Werksnorm 0.05 mm Weight: 1.25 kg Battery / supply: 3 V Jaw length: 150 mm Special features and materials Material: hardened stainless steel Fine-adjustment thumbwheel Pointed jaws for narrow features and step measurements Digital functions: ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Data output: RB 5 FAQ What measuring range does this caliper cover? The caliper covers 0–500 mm, classifying it as a medium‑range instrument suitable for larger components and assemblies. What level of resolution and baseline accuracy can be expected? The display provides 0.01 mm resolution and the device is supplied to a factory standard of Werksnorm 0.05 mm. Which materials is the caliper made from and how does that affect durability? Constructed from hardened stainless steel, the instrument resists wear and maintains measurement stability under regular workshop use. Does the instrument offer fine adjustment and why is that useful? Yes; a fine‑adjustment thumbwheel enables controlled closing and repeatable positioning, improving precision when measuring delicate or small features. Which digital functions are available on the display? The display includes ON/OFF, mm/inch selection, 0/ABS, HOLD, TOL and PRESET functions to support versatile inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Werkstatt-Messschieber, 0,02mm, Feineinstellung, Werksnorm - Metav IndustryLine
Das 1989 gegründete Traditionsunternehmen für den Vertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für hevorragende Messwerkzeuge zu einem hervorragenden Preis. Das wichtigste Messbereich: bis 500mm Ablesung: 0,02mm Material: Spezialstahl, Skala und Nonius mattverchromt Groß gedacht, sauber gemessen Der Messbereich von bis 500mm eröffnet spürbar mehr Freiheit beim Prüfen größerer Bauteile. Ob Formplatten, Vorrichtungsrahmen oder lange Profile – Abstände, Außenkanten und Aufbauten lassen sich in einem Zug erfassen, ohne ständiges Umspannen. Das spart Zeit, hält die Messpunkte konsistent und macht Reihenmessungen im Vorrichtungs‑ und Formenbau deutlich flüssiger. Gerade bei Baugruppen mit überstehenden Teilen oder tiefen Aufnahmen bleibt der Überblick erhalten: Kante zu Kante, Loch zu Loch, Fläche zu Fläche – der Arbeitsablauf bleibt ruhig und klar strukturiert. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber. Die richtige Toleranz einhalten nach Werksnorm Alle Komponenten unseres Messwerkzeugs werden konsequent gemäß Werksnorm gefertigt. Die Norm definiert präzise Vorgaben für Werkstoffe, Toleranzen, Fertigungsabläufe und Kalibrierprotokolle. Durch die strikte Einhaltung dieser Spezifikationen sichern wir Maßhaltigkeit, Reproduzierbarkeit und die weltweite Anerkennung der Prüfzertifikate – entscheidende Faktoren für Audit- und Freigabeprozesse. Profi-Tip: Wie liest man die Haupt- und Noniusskala sicher ab? Zuerst den ganzen Millimeter an der Null-Linie des Nonius auf der Hauptskala ablesen, dann auf dem Nonius den Strich suchen, der exakt mit einem Hauptskalen-Strich fluchtet – das ergibt die Dezimalstelle (bei 1/20-Teilung 0,05 mm, bei 1/50-Teilung 0,02 mm). Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Telefon: +49 2822 7131930 Produkteigenschaften: Bestellnummer: M201.026 Messbereich: 0 bis 500mm Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber Ausführung: analog Gewicht: 2,3kg Material: Spezialstahl, Skala und Nonius mattverchromt Lieferung im Kasten Norm: Werksnorm Schnabellänge: 90mm Ablesung: 0,02mm mit Feineinstellung Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Zu beachtende Faktoren beim Erwerb eines Messschiebers: Neben den zentralen Faktoren Genauigkeit und Messbereich gewinnen auch komplette Funktionen wie der Datenausgang oder die Überwachung der Messkraft zunehmend an Bedeutung. Für die Qualitätssicherung sowie Laboreinsätze erweist sich der Messschieber mit geregelter Messkraft als besonders nutzbringend. Darüber hinaus ist sinnvoll zu betrachten, ob eine Kalibrierung des Messschiebers notwendig ist. Eine Kalibrierung kann direkt nach Lieferung vorgenommen werden und sollte zur Sicherung der Prozessqualität jedes Jahr erneuert werden. Pflegehinweis - damit Sie lange etwas von Ihrem Messwerkzeug von Metav IndustryLine haben: Werkstatt-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
500mm Werkstatt-Messschieber, 0,05mm, Feineinstellung, Werksnorm - Metav IndustryLine
Der von Ludwig Josef Bayer 1989 gegründete Traditionsvertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für Premium-Messwerkzeuge zu einem hervorragenden Preis. Das wichtigste auf einen Blick Messbereich: bis 500mm Ablesung: 0,05mm Material: Spezialstahl, Skala und Nonius mattverchromt Weite Strecken, klare Ergebnisse – 0 bis 500mm Mit 0 bis 500mm wächst der praktische Spielraum im Tagesgeschäft. Du erreichst entfernte Kanten, misst über Montagepunkte hinweg und kontrollierst Abstände an größeren Bauteilen, ohne die Position zu wechseln. So bleibt der Fokus auf dem Wesentlichen: zügig prüfen, klare Ergebnisse erhalten, Bauteile sicher freigeben – besonders hilfreich bei Formeinsätzen, Spannrahmen und Prüfvorrichtungen. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber. Immer die richtige Toleranz nach Werksnorm Alle Komponenten unseres Metav IndustryLine Werkstatt-Messschieber werden konsequent gemäß Werksnorm gefertigt. Die Norm definiert präzise Vorgaben für Werkstoffe, Toleranzen, Fertigungsabläufe und Kalibrierprotokolle. Durch die strikte Einhaltung dieser Spezifikationen sichern wir Maßhaltigkeit, Reproduzierbarkeit und die weltweite Anerkennung der Prüfzertifikate – entscheidende Faktoren für Audit- und Freigabeprozesse. Expertenhinweis: Welche Messkraft ist richtig? Nur mit Daumendruck schließen – übermäßiges Klemmen biegt die Schenkel zusammen und führt zu „negativen“ Messwerten. Produktmerkmale für den Werkstatt-Messschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber Bestellnummer: M201.025 Zahlen & Fakten: Messbereich: 0 bis 500mm Gewicht: 2,2kg Norm: Werksnorm Schnabellänge: 90mm Ablesung: 0,05mm Besonderheiten Ausführung: analog Material: Spezialstahl, Skala und Nonius mattverchromt Lieferung im Kasten mit Feineinstellung Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Welche Kriterien beim Kauf eines Messschiebers wichtig sind: Während der Genauigkeit und dem Messbereich Beachtung geschenkt werden muss, sind auch Funktionen wie Dateneingabe-Optionen und Kontrolle der Messkraft von maßgeblicher Relevanz. Das Arbeiten mit einem Messschieber, der eine exakt eingestellte Messkraft aufweist, ist in der Qualitätssicherung und bei Labortätigkeiten von großem Nutzen. Zusätzlich sollten man darauf Achten, ob man einen kalibrierten Messschieber braucht. Die Möglichkeit zur Kalibrierung besteht unmittelbar bei Entgegennahme; zur Sicherstellung der Prozessstabilität sollte regelmäßig jährlich neu kalibriert werden. Pflegehinweis - damit Sie lange etwas von Ihrem Metav IndustryLine Messwerkzeug haben: Werkstatt-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
500mm Werkstatt-Messschieber, 0,05mm, Feineinstellung, Werksnorm - Metav IndustryLine
Die überragenden Bewertungen von Metav Werkzeuge stehen für 42.000 glückliche Kunden. Erlebe es aus erster Hand und kaufe auf metav-shop.de! Das wichtigste auf einen Blick für Metav IndustryLine 500mm Werkstatt-Messschieber Messbereich: bis 500mm Ablesung: 0,05mm Material: Spezialstahl, Skala und Nonius mattverchromt Mehr Reichweite, weniger Umspannen0 bis 500mm Mit einem Messbereich von bis 500mm bleiben selbst ausgedehnte Werkstücke überschaubar. Große Flächen, lange Kanten und weit gesetzte Bohrungen lassen sich strukturiert abfahren, ohne das Bauteil zu drehen oder umzusetzen. Das erleichtert das Prüfen von Formplatten, Trägern, Profilen und Rahmenbauteilen im Vorrichtungs‑ und Formenbau. Der Vorteil zeigt sich im Ablauf: Du bleibst im Takt, behältst den Bezug und kommst schneller zu belastbaren Ergebnissen. Wir haben uns Gedanken gemacht, wie wir die einzelnen Messbereiche der Messschieber Klassifizieren können. Klassifizierung Messbereiche beim Messschieber. Die richtige Toleranz einhalten nach weltweit gültigen Standards Alle Komponenten unseres Werkstatt-Messschieber Metav IndustryLine werden konsequent gemäß Werksnorm gefertigt. Die Norm definiert präzise Vorgaben für Werkstoffe, Toleranzen, Fertigungsabläufe und Kalibrierprotokolle. Durch die strikte Einhaltung dieser Spezifikationen sichern wir Maßhaltigkeit, Reproduzierbarkeit und die weltweite Anerkennung der Prüfzertifikate – entscheidende Faktoren für Audit- und Freigabeprozesse. Fachhinweis: Welche Messkraft ist richtig? Nur mit Daumendruck schließen – übermäßiges Klemmen biegt die Schenkel zusammen und führt zu „negativen“ Messwerten. Hohe Wiederholgenauigkeit durch die Feineinstellung Die Feineinstellung, auch als Feinverstellung bezeichnet, ist eine kleine Rändel- oder Daumenschraube, mit der der bewegliche Schieber eines Messschiebers in äußerst feinen, genau kontrollierbaren Schritten verschoben werden kann. Auf diese Weise wird ermöglicht, die Backen ohne Spiel an das Werkstück anzulegen, eine gleichmäßige Messkraft sicherzustellen und den Messwert kontrolliert und ohne Überschreiten einzustellen. Das steigert die Genauigkeit, die Wiederholbarkeit sowie den Bedienkomfort, insbesondere bei großen oder hochwertigen Werkstatt-Messschiebern. Sie sind unsicher, ob das Werkzeug zu Ihrer Anwendung passt?? Oder es fehlen Ihnen noch technische Daten?? Kein Problem, sprechen Sie uns an!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Leistungsmerkmale zumWerkstatt-Messschieber von Metav IndustryLine: Bestellnummer: M201.035 Messbereich: 0-500mm Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber Ausführung: analog Gewicht: 2,7kg Material: Spezialstahl, Skala und Nonius mattverchromt Lieferung im Kasten Norm: Werksnorm Schnabellänge: 150mm Ablesung: 0,05mm mit Feineinstellung Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf beim Erwerb eines Messschiebers Wert gelegt werden sollte: Neben der Präzision und dem Messbereich sind zusätzliche Funktionen wie ein Datenausgang oder die Messkraftüberwachung entscheidend. Ein Messschieber mit sorgfältig kalibrierter Messkraft ist speziell für die Qualitätssicherung und die Nutzung in Laboren von Vorteil. Darüber hinaus ist sinnvoll zu betrachten, ob eine Kalibrierung des Messschiebers notwendig ist. Schon im Zuge der Auslieferung kann die Kalibrierung erfolgen, und mit jährlicher Beständigkeit wird die Prozesssicherheit unterschützt.
500mm Workshop Caliper With 150mm Pointed Jaws, 0.02mm Resolution, Fine Adjustment, Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of sturdy monoblock construction, hardened stainless-steel measuring surfaces and a 0–500 mm range with 0.02 mm resolution for reliable workshop measurements; order directly via Metav Werkzeuge or request advice from our consultants for specification matching. M201.305 Workshop Caliper with Point — 0–500 mm, hardened stainless steel The M201.305 Workshop Caliper with Point is a robust analogue monoblock caliper designed for workshop use, enabling external, internal and step measurements on components up to 500 mm. Workshop caliper M201.305 by Metav IndustryLine Monoblock construction for increased stiffness Fine-adjustment spindle for precise positioning Suitable for outside, inside and step measurements Reliable long-span measurements for fixtures and assemblies The monoblock frame and hardened measuring faces give this caliper dimensional stability across its 0–500 mm span, placing it in the mid‑range class suited to fixture, mould and general workshop measurement tasks. The monoblock design reduces torsion and improves reproducibility compared with split‑beam designs, which means measurements stay consistent when handling larger components. The matt‑chromed scale resists glare, helping operators read values more reliably under workshop lighting; the caliper is thus engineered for repeatable results rather than delicate, short‑range lab work. Clear analogue readout with fine positioning for accurate setting This analogue instrument combines a dual nonius arrangement (top scale in 1/1000" and bottom scale in 1/50 mm) with a fine‑adjustment spindle, enabling careful alignment before taking a reading. The bottom nonius corresponds to a 0.02 mm incremental scale, which is appropriate for industrial workshop tolerances and typical quality control tasks. The fine adjustment lets operators close the jaws gently and set the measuring faces without overshoot, improving the effective usability of the mechanical scale and reducing measurement scatter caused by manual handling. Practical features that support workshop workflow Built for everyday use, the caliper includes a 150 mm long jaw profile for deeper reach when measuring recesses or stepped features, and the jaw geometry is optimised for external and internal contact points as well as step gauging. The instrument is supplied in a transport case to protect it during storage and transit, and it is finished in hardened stainless steel with a matt chrome scale for durability in harsh workshop environments. The device is manufactured to the maker’s factory standard and is intended as a reliable, serviceable tool for production and maintenance departments that need a robust mechanical measuring solution. Contact Metav Werkzeuge for tailored advice on integrating the M201.305 workshop caliper into measurement routines and to arrange supply direct from Emmerich. Technical data Article number: M201.305 GTIN: 4054469101279 ECLASS: 21170344 SKU: M201.305 Facts Measuring range: 0–500 mm Resolution: 0.02 mm (1/50 mm) Jaw length: 150 mm Nonius scales: 1/1000" (top) and 1/50 mm (bottom) Special features Monoblock construction Hardened stainless‑steel measuring faces Matt‑chromed scale Fine‑adjustment spindle Analogue caliper with point for external, internal and step measurements Supplied in a protective transport case Manufacturer’s factory standard (Werksnorm) FAQ What measurement range does the caliper cover? The M201.305 workshop caliper covers a measuring range of 0–500 mm, providing the reach required for medium‑sized components. How fine is the resolution and how is it read? Resolution is 0.02 mm (1/50 mm) on the metric nonius; the top nonius offers inch‑based graduations at 1/1000". Readings are taken from the analogue scales with the aid of the fine‑adjustment spindle for precise setting. Is the caliper suitable for rough workshop environments? Yes, the caliper is manufactured in hardened stainless steel with a matt‑chromed scale and comes in a transport case, making it suitable for routine workshop use and transport. Which measurement types are supported by the instrument? The caliper supports external, internal and step measurements, with jaw geometry and a long jaw profile for deeper reach when needed. Who supplies and is responsible for this caliper? Metav IndustryLine supplies the M201.305 workshop caliper and can advise on integration into workshop measurement procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Workshop Caliper With Pointed Jaws, Fine Adjustment, Monoblock Design - Metav IndustryLine
Take advantage of a robust 500 mm measuring range combined with a hardened stainless steel monoblock frame and a fine-adjustment spindle for smooth, repeatable workshop measurement. Order the caliper directly via Metav Werkzeuge or request advice from our consultants. Workshop caliper M201.335.1 — 500 mm vernier caliper, hardened stainless steel, fine adjustment (Metav IndustryLine) The Workshop caliper M201.335.1 is an analogue vernier caliper for heavy-duty workshop use, offering a 500 mm range, dual vernier scales and pointed jaws for precise positioning across external, internal and step measurements. 500 mm measuring range Hardened stainless steel construction Fine-adjustment spindle for controlled closing Monoblock design for improved rigidity Reliable range and robust construction for daily workshop use The caliper's 500 mm measuring range places it in the medium class of tools, suited to larger fixtures and assemblies while remaining easy to guide by hand. A monoblock frame reduces flex and improves long-term stability under workshop conditions. The body is made from hardened stainless steel with a matt-chrome scale, combining corrosion resistance with a low-reflection surface that eases reading under poor lighting. Compliance with DIN 862 for jaw geometry (applicable where specified) ensures the instrument matches recognised workshop standards. Precision handling that produces repeatable results Measurement resolution is 0.05 mm, achieved by a mechanical vernier arrangement that includes an imperial/metric dual scale (1/128" above, 1/20 mm below) for cross-referencing. A dedicated fine-adjustment spindle enables slow, controlled closing of the jaws, which reduces operator-induced variation and speeds up repetitive measurement tasks. The pointed jaws allow stable engagement on edges and grooves where standard flat jaws struggle, contributing to faster set-ups and fewer retakes. Practical features that support productivity and longevity The instrument is configured as a true workshop instrument: a monoblock frame for stiffness, hardened contact surfaces for wear resistance and a matt-chrome scale for durable legibility. The jaw length of 200 mm is optimised for a mix of accessibility and rigidity when measuring larger components. Being an analogue instrument, it requires no batteries and is impervious to display faults, making it a dependable choice where uptime matters. Clear, mechanical graduation and robust construction help reduce measurement uncertainty in everyday production and maintenance tasks. Choose the Metav IndustryLine workshop caliper for consistent 500 mm accuracy and rugged service life — contact Metav Werkzeuge for product matching and fast delivery from our Emmerich location. Technical Data SKU: M201.335.1 GTIN: 4054469101743 eCl@ss: 21170344 Tariff number: 90173000 Numbers / Core technical data Measuring range: 0–500 mm Resolution: 0.05 mm Vernier scales: 1/128" (top) and 1/20 mm (bottom) Jaw length: 200 mm Norm: DIN 862 (where applicable) Designs / Special features Material: hardened stainless steel with matt-chrome scale Construction: monoblock frame Type: analogue vernier caliper Fine adjustment spindle for controlled jaw movement Pointed tips for precise positioning Suitable for external, internal and step measurements FAQ What measuring tasks is this caliper best suited for? The caliper is intended for workshop measurement of medium-sized components; its 500 mm range and robust construction suit fixtures, housings and general machine‑shop tasks. How precise is the instrument for production checks? The mechanical setup yields a resolution of 0.05 mm, supported by a dual vernier system (1/128" and 1/20 mm) for reliable cross-checking in both metric and imperial units. Are the jaws suitable for edge and groove measurements? Yes, the tool features pointed tips that stabilise contact in narrow grooves and on edges where flat jaws would be less secure. Does the caliper comply with recognised standards? Jaw geometry and basic dimensions follow DIN 862 where applicable; further specification is provided in the technical data for verification. Is the instrument suitable for harsh workshop environments? The hardened stainless steel construction and matt-chrome scale increase resistance to wear and corrosion, making the caliper well suited to demanding shop-floor conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision measurement for heavy components with workshop calipers
Workshop calipers, also described as heavy-duty calipers or industrial vernier calipers, are engineered for exact external and internal measurement on large workpieces. Designed for shipbuilding, rail vehicle manufacture and heavy plant assembly, these calipers deliver stable, repeatable readings even across extreme spans up to 10,000 mm (10 metres).
How these calipers perform in industrial practice
Built with an extremely distortion-free frame of hardened or weight-optimised special steel, workshop calipers maintain alignment across long reaches and heavy contact forces. They measure shafts, flanges and housings by combining robust jaws with optional measuring-force-limiting systems, fine micrometric slider adjustment and rounded internal measuring faces to reduce damage and measurement error. Available in analogue form with a fine vernier scale or as a digital variant with data output for direct integration into quality assurance systems.
Practical advantages that improve production
- Proven metrological stability for large components thanks to distortion-free construction.
- Hands-on ergonomics through measuring-force-limiting and precision fine adjustment, reducing operator error.
- Flexible data handling with digital data output for seamless quality documentation.
- Materials and design that withstand heavy workshop environments: hardened special steel or weight-optimised alternatives.
- Measurement range scalability up to 10,000 mm (10 metres) for XXL applications.
Why Metav is the sensible partner for these tools
Metav stands for the democratisation of precision and acts as a quality filter for the European market from its base in Emmerich. With over 48,000 customers and a portfolio exceeding 250,000 products, Metav combines long-standing expertise with a comprehensive range that simplifies procurement for industry and trade. In the field of workshop calipers, Metav’s assortment is positioned as the optimal choice, offering both analogue vernier solutions and modern digital models suitable for integration into industrial measurement workflows.
Core takeaway
For reliable dimensional control of oversized components, workshop calipers deliver measurable gains in repeatability, ergonomics and process integration—making them indispensable in heavy industry.
FAQ
What measuring ranges are available for workshop calipers?
Workshop calipers are offered for extreme tasks, with models covering spans up to 10,000 mm (10 metres) to accommodate large shafts, flanges and housings.
Can these calipers connect to quality assurance systems?
Yes. Many industrial vernier calipers are available with digital data output, enabling direct transfer of measurement values into QA systems for traceable documentation.
Which design features reduce operator-induced error?
Features such as a measuring-force-limiting system, a precise fine-adjustment mechanism and rounded internal measuring faces reduce variability and the risk of damaging components during measurement.
What materials ensure long-term stability for large-scale measurement?
Metav’s workshop calipers use hardened special steel or weight-optimised variants to ensure minimal distortion and lasting dimensional stability even under heavy use.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com