Reliable scales for precise industrial weighing
Scales are essential for accurate weight determination in production, laboratory and shipping environments, providing clear benefits in process control, quality assurance and legal compliance. A well-chosen scale delivers the required weighing range and readability while ensuring repeatable results for tasks such as quality control, recipe formulation or parcel handling, and integrates features like tare, counting and data export to streamline workflows. Consideration of environmental influences, routine calibration or legal verification and sturdy construction for heavy-duty use ensures consistent performance with precision scales, platform scales and counting scales.
2000 kg Shear Beam Load Cell, Stainless Steel, IP68/IP69K, 5 m Cable, C3 Class - KERN
Combine robust stainless steel construction with OIML C3 accuracy and high environmental protection for dependable weighing in demanding settings; order the unit directly via Metav Werkzeuge or consult the Metav specialists for system integration and technical clarifications. CT 2000-3Q1 shear beam load cell by KERN — stainless steel, 2,000 kg The CT 2000-3Q1 is a shear beam load cell designed for industrial weighing applications where accuracy and environmental resistance are required, suitable for platform, hopper and floor-recessed scales. Stainless steel shear bar construction 2,000 kg nominal capacity IP68 / IP69K protection rating OIML C3 accuracy class Precise measurement where process control matters The load cell employs a shear beam principle that converts applied force into a proportional electrical signal, delivering a nominal output of 2 mV/V and meeting OIML C3 accuracy requirements. This combination provides consistent, traceable readings that support automated batching and inventory control processes. The calibrated output simplifies amplifier or indicator configuration, helping to maintain process reliability and reduce recalibration frequency in production environments. Durable design for harsh production environments Manufactured in stainless steel, the transducer resists corrosion and is rated to IP68/IP69K under EN 60529, which ensures long-term operation even when exposed to dust, washdowns or high-pressure cleaning. The specified operating temperature range from -30°C to 70°C enables stable performance across typical industrial climates. These properties reduce downtime and extend service intervals for installations in food, chemical or building-materials facilities. Easy integration into diverse weighing systems Engineered for compatibility with multiple scale formats, the cell is suitable for platform scales, hopper scales and floor-recessed installations, with a 6‑wire connection and a 5 m cable for flexible mounting. The unit’s stainless shear bar and compact form facilitate retrofits as well as new builds. An EX-rated variant is available on request for hazardous-area applications, and CE and RoHS conformity support regulatory compliance in European production lines. Supply reliability and precision partnership Sourcing this load cell through Metav Werkzeuge brings the practical benefit of local stock management and expert pre-sale advice from a supplier experienced in precision measurement. Metav’s Emmerich hub acts as a quality filter for the European market, combining broad product availability with the assurance that components meet industrial standards. This approach supports predictable procurement and reliable delivery for manufacturing and logistics operations. Contact Metav Werkzeuge in Emmerich for advice on integrating the KERN CT.2000-3Q1 into existing weighing systems — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical data SKU: CT.2000-3Q1 Article number: CT Q1 Manufacturer: KERN GTIN: 4045761222199 Key specifications Maximum capacity: 2,000 kg Nominal output: 2 mV/V Accuracy class: OIML C3 Cable length: 5 m Weight: 1 kg Operating temperature: -30°C to 70°C Features & materials Material: stainless steel Protection class: IP68 / IP69K Connection: 6‑wire connection Conformity: CE and RoHS Suitable for: platform, hopper and floor-recessed scales EX version: available on request Standard: EN 60529 Tariff number: 84239010 Origin: Spain FAQ What industries is this load cell suitable for? The CT.2000-3Q1 is designed for industrial and manufacturing environments and is commonly used in the chemical, food and pharmaceutical sectors, as well as in building materials, logistics and packaging applications. Can the load cell be used outdoors or in washdown zones? Yes, the stainless steel construction combined with the IP68/IP69K rating allows the load cell to withstand outdoor exposure and high-pressure cleaning typical in food-industry and harsh industrial contexts. Is there an intrinsically safe or EX version available? An EX execution is available on request; Metav Werkzeuge can provide details about the hazardous-area variant and compatibility with explosion-protection requirements. What connection and cabling does the device use? The unit is supplied with a 5 m cable and a 6‑wire connection, facilitating integration with common indicators and junction boxes in weighing installations. How precise is the measurement and what output does it provide? The load cell meets OIML C3 accuracy and provides a nominal output of 2 mV/V, offering stable, standardised signals for downstream electronics and process control. KERN — Origin: Spain
20000 g Precision Balance 0.1 g Readability, Graphic LCD, Stainless Steel Pan, DMS System - KERN
Take advantage of the combination of a large 20,000 g capacity, 0.1 g readability and an intuitive graphic display to maintain efficient, traceable weighing processes. Order the balance directly via Metav Werkzeuge or request tailored advice from our consultants. KERN PLS 20000-1F Precision balance — 20,000 g range, 0.1 g readability The PLS 20000-1F is a precision balance designed for laboratory and industrial environments, offering a wide weighing range combined with a comfortable graphic display for guided workflows. Large 20,000 g capacity, 0.1 g readability Graphic LCD for fast, guided operation Built-in recipe database with 99 entries Stainless-steel weighing pan and draft shield Reliable measurement for broad laboratory tasks The balance delivers a 20,000 g capacity with 0.1 g readability, supported by a strain-gauge weighing system that ensures stable and consistent results. Reproducibility is specified at 0.1 g and linearity at ±0.4 g, figures that translate into dependable performance for routine analysis, sample preparation and quality checks. These measurable parameters make the instrument suitable where traceable, repeatable weighing is required and provide a clear technical basis for process control. Faster processes through guided display and recipe management An integrated graphic LCD simplifies operation with clear, language-selectable on-screen instructions and a display digit height of 15 mm for easy reading. The internal recipe database stores up to 99 recipes with up to 20 components each, saving complete recipe names and target weights to accelerate repetitive dosing tasks. The balance also provides a dosing aid with a high-stability mode and selectable filter settings, which together reduce calculation steps and help to avoid rework during formulation or sample distribution. Practical design for laboratory conditions and compliance A stainless-steel weighing pan and included draft shield support hygienic handling and protect results from drafts. The unit features a CAL programme for straightforward adjustment of accuracy; external calibration weights are available separately for verification when required. The instrument operates reliably between 15 °C and 35 °C and in relative humidity up to 80%, meeting typical laboratory environmental ranges while remaining compact and portable at approximately 3.2 kg. Contact Metav Werkzeuge in Emmerich for personalised specification advice, calibration options and dependable delivery of the KERN PLS 20000-1F Technical data Article number: TPLSG-A SKU: PLS.20000-1F GTIN: 4045761243354 Manufacturer: KERN Country of origin: CN Facts Weighing range: 20000 g Readability: 0.1 g Reproducibility: 0.1 g Linearity: ±0.4 g Weighing pan (rectangular): 200×175 mm Weighing pan thickness: 15 mm Housing dimensions: 210×345×100 mm Display digit height: 15 mm Operating temperature: 15 °C–35 °C Max. ambient humidity: 80% Weight: 3.2 kg Power input: 100 V–240 V, 50 / 60 Hz Special features Weighing system: strain-gauge (DMS) Display: graphic LCD with multilingual cleartext guidance (DE/EN/FR/IT/ES/PT) Internal memory: full recipe storage with name and target values Recipe database: up to 99 recipes, up to 20 components each Dosage aids: high-stability mode and selectable filters CAL calibration programme for accuracy adjustment Draft shield and work-protection hood included Weighing plate material: stainless steel Power adapters included: AUS; CH; EURO; UK; US Typical applications: laboratory work, R&D, jewellery and precious-metal testing, environmental analysis, electronics industry FAQ What is the smallest change in mass the balance can register? The KERN PLS 20000-1F provides a readability of 0.1 g and reproducibility of 0.1 g, enabling detection of small mass changes suitable for many laboratory tasks. Can recipes be saved and reused for recurring formulations? Yes. The balance features an internal recipe database that stores up to 99 recipes with up to 20 components each, allowing repeated processes to be executed quickly and consistently. Is the balance suitable for counting applications? Counting functions are supported; the instrument provides reference piece weights with laboratory counting down to 500 mg and standard counting down to 5 g, depending on the application and accuracy requirements. How is accuracy maintained over time? Accuracy can be verified and adjusted via the integrated CAL programme; for formal verification, external calibration weights are recommended and available separately to perform traceable checks. Which accessories are supplied with the unit? The KERN PLS 20000-1F is supplied with a stainless-steel weighing pan and a work-protection hood (draft shield), plus a set of international power adapters (AUS, CH, EURO, UK, US). Metav Werkzeuge, Emmerich am Rhein, Germany — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271
20000 kg Load Cell Stainless Steel, IP68, 2 mV/V, OIML C1 - KERN
There is a data inconsistency that prevents creation of a reliable product description: the entry identifies the product manufacturer as KERN, while the product enrichment and headline refer to SAUTER. Because the brand and manufacturer information are contradictory, it is not possible to determine the correct maker of the load cell or to ensure that other associated specifications are correctly attributed. Please verify and confirm the correct manufacturer and product identity (brand name and SKU) so that a precise, industry‑accurate description can be produced. Once the manufacturer discrepancy is resolved, a full technical and commercial description—aligned with Metav Werkzeuge’s quality standards—can be generated for publication.
2000g Precision Caliper-Style School Balance With Density Determination, 0.01g Readability - KERN
Take advantage of precise density measurement and classroom‑ready operation by combining density determination, readability 0.01 g, and a compact, battery‑capable design for efficient teaching and routine lab work. Order the device directly via Metav Werkzeuge or contact our consultants for tailored advice. KERN EMB 2000-2V — School balance with integrated density determination, 2,000 g range A KERN EMB 2000-2V school balance with integrated density determination, designed for education and standard laboratory tasks with an intuitive graphic control panel KERN EMB 2000-2V: density determination function Readability 0.01 g for precise results Self‑explanatory graphic control panel Flat design and hook for underfloor weighing Accurate density results with minimal training The KERN EMB 2000-2V offers an integrated density determination routine that displays results directly, reducing procedural steps and measurement errors. The balance provides a readability 0.01 g and reproducibility 0.02 g, supported by a strain gauge weighing system, so outcomes are both precise and repeatable. The four-step visualised workflow (tare, select solid/liquid, weigh in air, weigh in liquid) is presented on the LCD with 15 mm digits, eliminating lengthy training and accelerating classroom experiments. Built for classrooms and routine lab environments A compact footprint and flat design make the unit easy to fit on crowded benches and to store between lessons. The self‑explanatory graphic control panel guides even inexperienced operators through the measurement sequence, lowering the risk of user error and saving instructor time. Battery operation (9 V block) and a mains adapter with CH/EU/UK/US plugs enable off‑bench use; the balance is intended for standard indoor environments (5 °C to 35 °C, up to 80% relative humidity), supporting practical demonstrations and small routine analyses. Practical benefits that support teaching and workflows The visible, stepwise process encourages correct handling and quick results, which is ideal for educational settings and for standard laboratory tasks where efficiency matters. The weighing plate is made from plastic and the device is lightweight and portable, helping with classroom rotations and mobile demonstrations. The integrated hook for underfloor weighing expands the range of experiments possible without adding separate accessories, while the unit’s compact dimensions and robust measurement specifications support consistent daily use. For reliable classroom and lab density measurements choose the KERN EMB 2000-2V and contact Metav Werkzeuge for personalised advice and secure supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: EMB-V SKU: EMB.2000-2V GTIN: 4045761144453 Manufacturer: KERN Origin: CN Facts Weighing range: 2000 g Readability: 0.01 g Reproducibility: 0.02 g Linearity: ±0.05 g Display type: LCD Display digit height: 15 mm Weighing plate diameter: 150 mm Weighing system: Strain gauge Device dimensions (W×D×H): 175 × 250 × 55 mm Weight: 0.89 kg Battery: 9 V block Battery operation time: 12 h Operating temperature: 5 °C to 35 °C Max ambient humidity: 80 % Power supply adapter countries: CH; EURO; UK; US Special features Integrated density determination function Self‑explanatory graphic control panel Hook for underfloor weighing included Particularly flat construction Visualised four‑step measurement workflow Plastic weighing plate Strain gauge measuring system FAQ How does the density determination routine work? The density routine uses a four‑step procedure: tare, select solid or liquid mode, weigh the sample in air, then in liquid; the density is calculated and displayed directly by the KERN EMB 2000-2V. Is the balance suitable for classroom use? Yes, the graphic‑supported control panel and visualised workflow make the EMB 2000-2V particularly suitable for teaching and training environments where quick comprehension and repeatable results are required. What accuracy and repeatability can be expected? The unit offers a readability of 0.01 g with reproducibility of 0.02 g and linearity of ±0.05 g, delivering reliable performance for educational and routine laboratory tasks. Can the balance run on battery power for mobile demonstrations? The balance accepts a 9 V block battery with up to 12 h operating time and includes a mains adapter set for CH, EU, UK and US sockets for flexible power options. Which materials can be weighed for density determination? Both solids and liquids can be measured; the device supports standard density procedures for laboratory and educational applications, with the mode selected via the graphic control panel. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930
2000g Precision Laboratory Balance 0.1g Readability Stainless Steel Pan 130×130mm DMS, LCD Display, 20h Battery - KERN
Benefit from a compact weighing solution that combines readability 0.1 g, a 2,000 g capacity and a stainless-steel pan for reliable everyday laboratory results; order the balance directly via Metav Werkzeuge or consult our specialists for application advice. KERN 440-47N — Compact precision laboratory balance, 2,000 g / 0.1 g A compact KERN 440-47N precision balance for routine laboratory and quality-control weighing Compact dimensions for limited bench space Readability 0.1 g for precise results Percentage function for target-value weighing Dependable accuracy for routine analytical tasks The balance delivers readability 0.1 g across a 2,000 g capacity, backed by a strain gauge system that provides consistent results for routine laboratory and production-control tasks. Low reproducibility (0.1 g) and linearity ±0.2 g reduce retests and increase throughput, which supports efficient process control. The clear LCD display with 15 mm digits improves legibility in busy environments while the stainless steel weighing pan (130×130 mm) resists corrosion and simplifies cleaning, ensuring the unit remains a reliable part of daily workflows. Space-saving design and practical functions that aid workflow Designed for confined workbenches, the instrument’s compact dimensions (165×230×74 mm) and included draft shield make it suitable for precise weighing in restricted spaces. The integrated percentage function allows results to be shown relative to a set target (100 %) and to display deviations quickly, which streamlines formulation and process checks. Power options include mains operation (100–240 V AC) and battery operation (9 V block), enabling flexible placement and up to 20 hours of battery runtime for occasional portable use. Traceable handling, counting support and compliant sample guidance Counting tasks are supported with a smallest piece weight down to 200 mg in counting mode for laboratory use and 2 g under normal conditions, enabling efficient inventory and component checks. For compliance, the instrument references the USP minimum sample weight principle to indicate the smallest recommended load for a given accuracy class, helping to interpret results for standards-driven workflows. The balance’s compact construction and tested specifications make it suitable for laboratories, training benches and quality-control stations where documented, traceable results are required. Choose the KERN 440-47N for compact, dependable laboratory weighing and contact Metav Werkzeuge for tailored advice and secure supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 440-47N Article number: 440 Manufacturer: KERN GTIN: 4045761013063 Category: Laboratory balances Origin: CN Facts Readability: 0.1 g Weighing range: 2,000 g Display digit height: 15 mm Weighing pan: 130×130 mm Weight: 1.1 kg Reproducibility: 0.1 g Linearity: ±0.2 g Battery type: 9 V block Battery runtime: 20 h Battery charge time: 10 h Operating temperature: 5 °C–35 °C Max. ambient humidity: 80 % Power input: 100–240 V AC 50/60 Hz 0.5 A Special features Weighing system: strain gauge Weighing pan material: stainless steel Percentage determination: enabled Draft shield: included Power options: mains adapter with CH, EURO, UK, US plugs; battery optional Minimum sample weight guidance: USP referenced Display type: LCD Product group: precision balances FAQ What level of accuracy can be expected for routine weighing? The KERN 440-47N provides a readability of 0.1 g with reproducibility of 0.1 g and linearity of ±0.2 g, delivering reliable results for routine laboratory applications. Is the balance suitable for piece counting and small parts? Yes; counting mode supports a smallest piece weight of 200 mg for laboratory counting and 2 g under normal counting conditions, which helps streamline inventory and component checks. Can the instrument be used without mains power? Battery operation is possible with a 9 V block and an estimated runtime of 20 hours, allowing temporary portable use away from mains supply. Does the balance include protection against draughts during sensitive measurements? A draft shield is included to reduce air disturbances and improve stability for small-sample and high-precision weighing tasks. How does the percentage function help in daily routines? The percentage determination enables weighing to a defined target value (100 %) and quickly shows deviations, simplifying formulation and comparative checks. KERN · Origin: China · Dealer contact: info@metav-werkzeuge.com | +49 2822 7131930
200g Aluminium-Protected Case For Single Calibration Weights E1–M3, Padded - KERN
Take advantage of the combination of robust protection, a lightweight aluminium shell and a padded interior to keep calibration weights safe and serviceable; order directly via Metav Werkzeuge or contact our consultants for tailored advice. KERN Aluminium-protected case for single weights 200 g (E1–M3) — 317-080-600 The Aluminium-protected case offers secure, padded storage for single calibration weights of nominal 200 g, designed for button/compact formats and accuracy classes E1 to M3. Aluminium exterior for robust protection Padded interior for secure weight storage Compatible with 200 g single weights Suited to accuracy classes E1–M3 Robust protection that preserves measurement integrity The combination of a solid aluminium shell and a padded interior provides reliable physical protection for precision masses, reducing the risk of dents, scratches and contamination during storage and transport. This protective concept is particularly important for calibration items in button or compact format, where surface condition directly affects weighing accuracy. By shielding weights from shocks and particulate ingress, the casing helps to maintain calibration intervals and reduces the likelihood of out-of-tolerance readings, supporting uninterrupted metrological workflows. Maintains traceability for calibration classes and routines Designed specifically for 200 g single weights across E1–M3 accuracy classes, the case supports proper handling and documented traceability in calibration processes. Higher-accuracy classes such as E1 demand careful storage to protect the reference mass; this case provides the controlled mechanical environment required. For laboratories and workshops that manage a mix of high-precision and routine weights, the organized storage reduces handling time and the risk of cross-contamination, thereby protecting measurement results and simplifying compliance with calibration standards. Practical, lightweight solution for workshop and lab logistics Weighing only 0.18 kg, the case is easy to handle and integrates into mobile calibration kits or fixed instrument benches without adding significant bulk. The model KERN 317-080-600 is intended for technicians and metrology professionals who require durable, space-efficient storage that supports frequent transport between workstations or on-site inspection rounds. The compact footprint and secure interior reduce the need for repeated recalibrations caused by accidental damage, improving operational uptime and safeguarding investment in precision weights. For professional procurement and further technical clarification, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options for the KERN 317-080-600 aluminium-protected case Technical data Article number: 317-080-600 Manufacturer: KERN GTIN: 4045761222694 Country of origin: CN Facts Net weight: 0.18 kg Suitable for weights: 200 g Accuracy classes: E1–M3 Eclass: 21100103 Special features Material: Aluminium Interior: padded For: single weights (button/compact) Product group: aluminium-protected case FAQ Which weights fit this aluminium-protected case? The aluminium-protected case by KERN (SKU 317-080-600) is designed for single 200 g weights in button/compact format and fits items intended for accuracy classes E1 through M3. Is the case suitable for transporting reference weights between sites? Yes. The KERN 317-080-600 combines a rigid aluminium shell with a padded interior to protect reference masses during transport and to minimise risk of damage that would affect calibration. Can this case be used in a calibration laboratory environment? The case is suitable for laboratory storage of calibration weights; by protecting surfaces and preventing contamination it supports traceability and helps to maintain the performance of weights used in certified calibration routines. What material and origin are specified for the case? The case is made from aluminium, features a padded interior and is listed with country of origin CN under the KERN 317-080-600 designation. KERN — Country of origin: CN — Address: not specified — Contact: not specified
200g Calibration Weight, Knob Shape, Fine-Turned Stainless Steel, OIML M2 - KERN
Benefit from the combination of OIML M2 accuracy, precision-turned stainless steel construction and a compact knob design for dependable calibration routines. Order the calibration weight directly via Metav Werkzeuge or consult our advisors if required. KERN 357-08 — Calibration weight (OIML M2, 200 g, knob) The KERN 357-08 is a 200 g single calibration weight intended for routine verification of laboratory and workshop scales, designed to deliver consistent results in regular test and control procedures. OIML Class M2 accuracy 200 g nominal mass, knob shape Precision-turned stainless steel Reliable accuracy for routine verification The calibration weight is manufactured to OIML M2 specification and provides a dependable reference for regular scale checks. Using a test mass in this class ensures repeatable measurement conditions and helps maintain the performance of analytical and precision balances. The 200 g nominal mass is a common reference point for mid-range calibrations, making the weight suitable for recurring verification tasks where documented conformity and measurement stability are required. Robust finish that reduces maintenance needs Constructed from precision-turned stainless steel, the weight resists corrosion and mechanical wear common in daily workshop environments. The fine-turned surface provides both dimensional stability and ease of cleaning, which reduces the frequency of unnecessary handling or rework. This durability translates directly into lower downtime for the verification cycle and supports long-term consistency of the reference mass without compromising the measurement chain. Ergonomic handling for efficient workflows The knob design simplifies placement and removal from weighing pans, improving speed and safety during repeated checks. Its single-weight format is compact and quick to integrate into established calibration routines, so technicians can complete verification steps with minimal interruption. Traceability is supported by the adherence to recognised OIML M2 standards, which assists in documentation and quality-control processes across production and laboratory settings. Choose the KERN calibration weight via Metav Werkzeuge for precise verification from our Emmerich location and benefit from expert advice on integration and use Technical data Article number: 357 SKU: 357-08 Manufacturer: KERN Material: precision-turned stainless steel OIML class: M2 Form: knob Nominal mass: 200 g Facts Mass (kg): 0.2 eClass: 32120103 Special features Single weight Fine-turned finish Knob form for easy handling FAQ What tolerance class does this calibration weight comply with? The KERN 357-08 calibration weight is produced to OIML M2 specification for a 200 g nominal mass, matching the accuracy requirements associated with that class. Can this weight be used for routine checks of workshop and laboratory scales? Yes, the single calibration weight in OIML M2 is intended for routine verification and spot checks on both workshop and laboratory scales where a 200 g reference mass is applicable. What material is the weight made from and how does that benefit its use? The weight is made from precision-turned stainless steel, which offers corrosion resistance, dimensional stability and straightforward cleaning—advantages that support long-term reliability in regular verification tasks. Is documentation or traceability available for this weight? The product adheres to recognised OIML M2 standards, which facilitates traceability and supports documentation needs; specific certification options can be confirmed with the supplier KERn — Address: not provided — Contact: Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930
200g Hook Weight, OIML Class M1, Stainless Steel Turned, 10 mg Tolerance - KERN
Take advantage of OIML M1 accuracy and the fine-turned stainless-steel construction for repeatable calibration routines; the compact hook design simplifies hanging-scale verification and reduces downtime. Order the KERN calibration mass directly via Metav Werkzeuge or contact our consultants for specification support. Hook calibration weight 347-086 – OIML M1, 200 g, KERN The Hook calibration weight 347-086 is a fine-turned stainless-steel hook weight designed for precise verification of hanging and platform scales in commercial and industrial environments OIML Class M1 certified 200 g nominal mass Fine-turned stainless steel Hook design for hanging scales Reliable accuracy for legal-for-trade checks The calibration mass is manufactured to OIML M1 specifications, providing a 10 mg tolerance that supports legally relevant verifications and routine quality controls. This accuracy class means the mass is suitable for many commercial and industrial weighing tasks where traceable calibration and compliance are required. By choosing a weight with defined tolerance, measurement uncertainty is reduced and calibration intervals can be planned with confidence, helping to maintain consistent process control and minimise the risk of non-conformances. Durable construction that eases daily handling Made from fine-turned stainless steel, the mass resists corrosion and retains its shape under normal workshop conditions, ensuring long service life and stable metrological properties. The hook design provides secure attachment for hanging scales and simple handling when transferring between instruments. With a nominal value of 200 g and compact cylinder dimensions of 28×61 mm, the mass is easy to store and manoeuvre during calibration routines, supporting efficient workflows in busy test rooms. Practical guidance for integration into calibration procedures For traceable results, use the weight within its stated tolerance and follow the scale manufacturer’s calibration procedure. The KERN hook calibration weight 347-086 is well suited for spot checks and routine verifications of suspended and small platform scales; its compact form factor reduces the influence of handling errors. Regular verification of mass condition and comparison against a higher-order reference preserve measurement integrity and ensure the ongoing reliability of weighing equipment. Fit-for-purpose supply and operational benefits Keeping a set of certified single weights like this hook mass on hand streamlines maintenance cycles and shortens equipment downtime. The combination of robust material, defined tolerance and compact dimensions supports standardised procedures and simplifies inventory for quality managers and workshop technicians. When traceability and repeatability are priorities, investing in a dedicated calibration mass reduces process variability and contributes to demonstrable quality assurance. Trust KERN precision — contact Metav Werkzeuge in Emmerich for purchasing and technical advice on the hook calibration weight 347-086: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Technical data SKU: 347-086 Manufacturer: KERN GTIN: 4045761256224 Country of origin: DE Core figures Nominal value: 200 g Weight (kg): 0.2 Tolerance (OIML): 10 mg Dimensions (cylinder): 28×61 mm Tariff number: 84239090 Special features OIML class: M1 Material: Fine-turned stainless steel Design: Hook weight for hanging scales Product group: Calibration weights – single weight FAQ Is this hook weight suitable for commercial-scale verification? Yes. The KERN hook calibration weight 347-086 is OIML M1 certified and designed for commercial and industrial verification tasks where a 10 mg tolerance meets regulatory and routine control needs. How should the mass be handled to preserve accuracy? Handle the mass by the hook or with clean gloves to avoid fingerprints and contamination; store it horizontally in a dry place. Regular inspection against a reference will keep the mass within specification. Can the weight be used on platform scales as well as hanging scales? The hook design is optimised for suspended and hanging-scale checks, but the 200 g mass may also be used for verification tasks on small platform scales where appropriate attachment or cradling prevents tipping. What does OIML M1 mean in practice? OIML M1 denotes a recognized accuracy class for calibration masses suitable for many commercial and industrial applications; the class specification and the stated 10 mg tolerance define permissible deviation for the nominal value. KERN — Germany. Manufacturer contact not provided.
200g Moisture Analyser, 0.01g Readability, 400W Halogen Quartz Lamp, 92mm Pan, Graphic Display 14mm, Internal PSU - KERN
Take advantage of precise, repeatable results and rapid cycle times thanks to the combination of a 400 W halogen‑quartz heater, a 0.01 g readability, and purpose-built drying programmes; order the KERN DAB 200-2 moisture analyser directly via Metav Werkzeuge or ask our consultants if needed. KERN DAB 200-2 moisture analyser — compact unit with 400 W halogen-quartz heater The KERN DAB 200-2 is a compact moisture analyser designed for rapid routine testing and spot checks in food production, agriculture, water management and laboratory environments. High-precision readability 0.01 g 400 W halogen-quartz heater Integrated 15 drying programmes 50 sample dishes supplied Faster routine checks with consistent, traceable results The analyser delivers reproducible measurements with a readability of 0.01 g and linearity of ±0.03 g, providing a reliable basis for process control and quality assurance. The combination of a high‑output 400 W halogen‑quartz heater and active heating profiles reduces overall drying time, so repetitive checks and acceptance tests are completed more quickly without compromising accuracy. For non‑specialist users, the instrument’s automatic shut‑off criterion explains the end of a drying cycle in simple terms: the unit switches off when the moisture loss meets the programmed stability settings, ensuring consistent sample treatment across batches. Clear visual feedback and programmable workflows for ease of use A backlit graphic display with 14 mm digit height presents current temperature, current moisture content in per cent and the remaining drying time in a single view, simplifying interpretation even under workshop lighting. The unit stores up to 15 drying programmes and keeps the last five completed processes in memory, enabling standardised routines for repeat tests. The sight window over the sample pan allows visual monitoring during the first adjustment, reducing the need for guesswork when establishing new procedures. These design choices reduce operator training time and increase throughput in busy labs and production areas. Practical design that matches workshop and laboratory needs The analyser features an aluminium weighing pan and a strain‑gauge weighing system, delivering stable mass measurement together with a weighing range of 200 g. The device is supplied with 50 sample dishes, so multiple spot checks can be carried out immediately after installation. The internal power supply accepts 230 V AC, 50 Hz and is delivered with a EURO plug, making commissioning straightforward in common European environments. Because the heater is designed for temperature‑insensitive samples, the instrument suits a broad range of materials used in food and industrial testing. Documentation, traceability and application support to reduce uncertainty For users seeking best practice and validated parameter settings, an application handbook is available in the download centre with examples, settings and practical tips tailored to typical materials. The unit also displays the minimum sample weight metric required by some pharmacopeia standards, helping to observe regulatory guidance where it applies. Combined with the analyser’s memory of previous processes, this supports documented test routines and easier integration into existing quality management systems. Contact Metav Werkzeuge in Emmerich for a technical match to your application and fast delivery of the KERN DAB 200-2 moisture analyser — email info@metav-werkzeuge.com or call +49 2822 7131930 for detailed specifications and procurement assistance Technical Data Article number: DAB.200-2 Manufacturer: KERN GTIN: 4045761213029 Origin: CN Category: Laboratory scales Facts Weighing range: 200 g Readability: 0.01 g Reproducibility: 0.01 g Linearity: ±0.03 g Heater output: 400 W Operating temperature: 40 °C–199 °C Pan diameter: 92 mm Weight: 4.82 kg Power supply: 230 V AC, 50 Hz Special features Heating type: halogen‑quartz‑glass radiant heater Display: backlit graphic display, digit height 14 mm Internal memory: 15 drying programmes, 5 saved processes Sample window for visual monitoring 50 sample dishes included Pan material: aluminium Load cell: strain gauge Plug: EURO Suitable for temperature‑insensitive samples Application areas: food production, water management, energy & raw materials, agriculture FAQ What is the minimum sample weight recommended for reliable results? The analyser indicates the minimum sample weight metric and the KERN DAB 200-2 should be used with samples that meet this guidance to ensure accurate moisture determination. Can the drying profiles be customised for different materials? Yes, the unit stores up to 15 drying programmes and allows custom heating profiles so the KERN DAB 200-2 can be configured for varied sample types and routine procedures. How long does a typical drying cycle take compared with conventional ovens? Cycle time depends on the material and programme, but the 400 W halogen‑quartz heater and active shut‑off criterion significantly reduce drying time versus passive oven methods for routine spot checks. Is the instrument suitable for lab and production environments? The compact design, programmable memory and robust weighing system make the analyser appropriate for both laboratory benches and production quality control stations in food, agriculture and process industries. How is result repeatability ensured across multiple operators? Repeatability is supported by stored programmes, a clear backlit graphic display and an automatic shut‑off criterion that standardises the end point; these features help ensure consistent results independent of operator experience. Manufacturer: KERN — Origin: China — Contact via Metav Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930
200g Plastic Case For Single Test Weight E2 Button/Compact, KERN - KERN
Take advantage of secure, compact storage and simple handling for a smooth calibration routine: the case protects single weights of 200 g in class E2, is made from robust plastic, and keeps handling efficient and safe — order via Metav Werkzeuge or consult our specialists for compatibility and stock. 317-080-400 Plastic weight case (200 g, Class E2) by KERN A Plastic weight case 317-080-400 designed to protect and transport single calibration weights of 200 g in class E2, suitable for compact/button form and workshop storage *Protective plastic case for single 200 g weights *Compatible with compact/button weight designs *Suitable for calibration class E2 *Lightweight: 0.02 kg Secure storage that preserves calibration integrity The compact design provides targeted protection for a single calibration weight of 200 g, reducing the risk of handling damage and preserving the mass surface from incidental knocks. By keeping the instrument separately stored in a purpose-made container, the traceability and condition required for routine checks are supported. The tailored fit for compact or button-style weights ensures minimal movement inside the case, which helps to maintain the calibration tolerance associated with class E2 items and reduces the need for premature recalibration. Low mass and robust material for everyday workshop use Constructed from plastic, the case combines a low own weight of 0.02 kg with practical resilience for regular transport between workstations or into field environments. The lightweight nature cuts down bulk when multiple items are carried, while the durable shell absorbs routine mechanical stresses during handling. For workshops looking to simplify logistics, the case offers a convenient single-weight solution that integrates into a calibration kit without adding significant load. Practical compatibility and brand reliability for metrology tasks The accessory is specified for use with single weights in compact/button form and is intended for weights conforming to class E2 metrological requirements. As a KERN-manufactured accessory, the case aligns with established calibration workflows and complements recognised measuring equipment, supporting efficient inventory management and reliable protection. For calibration technicians and quality managers, the practical benefit is a straightforward storage solution that supports consistent measurement practices and reduces accidental damage to critical mass standards. Contact Metav Werkzeuge in Emmerich for availability, technical advice and delivery details on KERN calibration accessories Technical data Article number: 317 SKU: 317-080-400 Manufacturer: KERN GTIN: 4045761081383 Facts Nominal weight: 200 g Calibration class: E2 Own weight: 0.02 kg Origin: Germany Tariff code: 84239090 Product category: Calibration weights Special features Plastic case for single weights (compact/button) Suitable for 200 g weights Compatible with class E2 weights FAQ What is this case intended for? This case is intended for the safe storage and transport of a single 200 g calibration weight; the KERN plastic weight case 317-080-400 is designed for compact/button-style weights and conforms to class E2 usage. Can the case be used for other weight classes? The 317-080-400 is specified for class E2 200 g single weights; use with weights of different nominal value or class is not recommended without checking fit and protection suitability. What material is the case made from, and how heavy is it? The case is made from plastic and has an own weight of 0.02 kg, offering a lightweight option for routine handling and transport. Is the case suitable for workshop transport and storage? Yes; the plastic construction and compact format of the KERN 317-080-400 case make it suitable for regular workshop transport and secure bench storage. Metav Werkzeuge, Emmerich am Rhein, Germany • eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271
200g Plastic Case For Single Test Weights, For Classes F1–M3 - KERN
Take advantage of secure, compact storage and lightweight handling for calibrated single weights; the robust plastic construction protects the measurement integrity of 200 g button/compact weights in classes F1–M3. Order the item directly via Metav Werkzeuge or ask our consultants for confirmation of fit and suitability. KERN Plastic Case 347-080-400 — plastic case for single calibration weights, 200 g, F1–M3 A plastic case designed to hold and protect individual calibration weights in button/compact form, intended for use with 200 g nominal weights across classes F1–M3. Compact plastic case for 200 g weights Fits button/compact weight form Suitable for calibration classes F1–M3 Protect calibrated weights and preserve accuracy The compact housing provides a practical solution for storing single calibration weights, helping to maintain measurement integrity during storage and transport. Manufactured from durable plastic, the case minimises exposure to dust and handling-related contamination, which can alter surface conditions and therefore weight values. For laboratories and workshops that rely on repeatable results, a dedicated protective container reduces the frequency of recalibration and supports consistent performance over time. Organised handling reduces downtime and handling errors Designed for individual weights in button/compact form, the case keeps a single 200 g weight secure and easy to retrieve. This arrangement simplifies workflows in busy test benches and calibration routines by reducing search time and the risk of accidental knocks or abrasion during handling. Clear identification of compatibility with classes F1–M3 assists procurement and asset management, enabling faster selection of the correct storage for each nominal weight and thus streamlining daily procedures. Lightweight, transport-friendly design for workshops and field use At approximately 0.02 kg, the case is exceptionally light yet robust enough for routine use in industrial environments. The low mass contributes to easy transport between workstations and off-site tasks while the plastic case resists corrosion and absorbs minor impacts without transferring stress to the contained weight. Where portability and protection matter equally, this format supports secure logistics without adding significant bulk to instrument kits or calibration boxes. Contact Metav Werkzeuge for expert advice on the KERN plastic case 347-080-400 to ensure correct storage for 200 g single weights and to confirm compatibility with existing calibration sets Technical Data Article number: 347-080-400 Manufacturer: KERN GTIN: 4045761008762 Origin: DE Facts Nominal weight: 200 g Calibration classes: F1–M3 Net weight (case): 0.02 kg ECLASS: 21100103 Tariff code: 84239090 Special features Material: Plastic Intended use: For single weights (button/compact) Product group: Plastic cases Product category: Calibration weights accessories FAQ Is this case suitable for a 200 g calibration weight? Yes. The KERN plastic case 347-080-400 is specified for a 200 g nominal single weight and designed to protect that form factor. Which accuracy classes are supported? The case is designated for weights in classes F1–M3, matching common laboratory and industrial calibration requirements. What material is the case made from? The casing is produced from plastic, chosen for its light weight and resistance to corrosion and minor impacts. Is the case portable for field use? Yes. With a net mass of approximately 0.02 kg, the case is lightweight and suitable for transport between workstations or to client sites. Does the case accommodate button or compact weight forms? It is intended for button/compact single weights and provides a dedicated storage solution for that specific geometry. KERN — Germany
200g Precision Caliper Balance 0.001g Readability, Checkweighing, Stainless Steel Pan 80mm, LCD 15mm - KERN
Take advantage of precise weighing, rapid response and an integrated checkweighing aid for consistent batch control; order the unit directly via Metav Werkzeuge or consult our specialists for application advice. KERN PFB 200-3 – Precision laboratory balance with 200 g capacity and 0.001 g readability The KERN PFB 200-3 is a compact precision balance designed for laboratory and industrial quality-control tasks where fine resolution and rapid feedback are required. Fast-response precision balance Checkweighing with visual and audible alarm High resolution 0.001 g readability Compact footprint 210×315×90 mm Accurate measurement for routine and critical tasks The KERN PFB 200-3 delivers high-resolution weighing with a readability of 0.001 g across a 200 g capacity, making it suitable for laboratory analyses and quality assurance where small mass differences matter. The balance uses a strain-gauge weighing system, which supports stable readings and a reproducibility of 0.002 g, so process decisions are based on reliable figures. The documented linearity of ±0.005 g provides predictable performance across the load range; this translates into fewer retests and faster throughput for repetitive tasks. Built-in checkweighing streamlines sorting and dosing An integrated checkweighing function offers an optical bargraph and an audible signal to indicate whether a sample is under, within, or over a defined tolerance band, supporting fast sorting, dosing and portion control. The clear LCD with 15 mm digit height and an ascending capacity indicator help operators assess remaining range at a glance. For shop-floor environments and routine QC stations, this combination reduces handling time and minimises error rates while preserving traceable results. Compact design that fits limited bench space With overall dimensions of 210×315×90 mm and a pan diameter of 80 mm, the unit has a compact footprint that suits confined workstations without compromising functionality. A removable draft shield (weighing chamber 140×150×65 mm) enables precise handling of small masses while allowing quick access for cleaning and sample placement. The stainless steel weighing plate combines durability with easy maintenance, keeping hygiene and corrosion resistance straightforward in daily use. Practical features for reliable operation Level adjustment via a built-in levelling vial and adjustable feet is supplied as standard to ensure accurate levelling and repeatable results. The balance is supplied with a universal mains adapter (100–240 V, 50/60 Hz) including CH, EURO, UK and US plugs for immediate deployment in multi‑location operations. Counting capability is supported with a smallest piece weight of 2 mg for laboratory counting and 20 mg under normal settings; this makes the instrument suitable for both precise mass measurement and simple inventory-count tasks. For precision dosing and dependable QC, contact Metav Werkzeuge to arrange delivery of the KERN PFB 200-3 or to discuss which setup best suits the laboratory or production line in Emmerich. Technical data Article number: PFB-A SKU: PFB.200-3 GTIN: 4045761202849 Manufacturer: KERN Category: Laboratory balances Origin: CN Numbers / Core technical data Weighing capacity: 200 g Readability: 0.001 g Reproducibility: 0.002 g Linearity: ±0.005 g Weighing pan diameter: 80 mm Weighing chamber (W×D×H): 140×150×65 mm Display digit height: 15 mm Overall dimensions (W×D×H): 210×315×90 mm Weight: 1.22 kg Operating temperature: 15 °C–30 °C Max. relative humidity: 80 % Designs / Special features Weighing plate material: stainless steel Weighing system: strain-gauge (DMS) Checkweighing: visual bargraph and audible signal Draft shield: removable Levelling vial and adjustable feet: standard Power supply: mains adapter 100–240 V, 50/60 Hz (CH; EURO; UK; US plugs) Counting mode: smallest piece weight 2 mg (laboratory) / 20 mg (normal) Fast-response display and capacity indicator Application areas: laboratory use, industrial applications, quality control FAQ How accurate is the balance for fine laboratory work? The KERN PFB 200-3 achieves a readability of 0.001 g with reproducibility of 0.002 g and linearity of ±0.005 g, which supports precise measurements for analytical and QC tasks. Can the unit be used for checkweighing and sorting tasks? Yes. The integrated checkweighing function provides both visual and audible signals to indicate whether a sample is below, within or above set tolerances, making it suitable for dosing and sorting applications. Is the balance suitable for counting small parts? Counting is supported; the instrument specifies a smallest piece weight of 2 mg in laboratory counting mode and 20 mg in normal counting mode, enabling both high-resolution counting and routine inventory checks. What environmental conditions are required for optimal performance? Stable operation is ensured between 15 °C and 30 °C with relative humidity up to 80%; levelling via the built-in vial is recommended for best accuracy with the KERN precision balance. Which power options are supplied with the balance? The unit includes a mains adapter compatible with 100–240 V, 50/60 Hz and is supplied with CH, EURO, UK and US plugs for immediate use at different locations. How easy is it to clean and maintain the weighing area? The removable draft shield and stainless steel weighing plate allow quick cleaning and access, aiding routine maintenance and ensuring hygienic conditions for laboratory procedures. Metav Werkzeuge, Emmerich am Rhein, Germany · info@metav-werkzeuge.com · +49 2822 7131930 · WhatsApp +49 170 2837271
200g Precision Caliper Lab Balance 0.001g Readability With Draft Shield, LCD Display - KERN
Combine high-precision readability of 0.001 g, compact portability and battery operation for reliable, cost-effective weighing in teaching and light quality control. Order the KERN EMB 200-3 directly via Metav Werkzeuge or consult our advisors for tailored advice. KERN EMB 200-3 laboratory balance — entry-level model with high precision The KERN EMB 200-3 is an entry-level laboratory balance designed for education, training and light quality-assurance tasks, offering precise measurements in a compact format High precision: 0.001 g readability Weighing capacity up to 200 g Ring-shaped draft shield and under-hook included Batteries included; mains adapter compatible Precise measurement where reproducibility matters The balance provides 0.001 g readability with a reproducibility of 0.001 g and a linearity of ±0.005 g, parameters that ensure consistent results for dosing, formulation and small-part inspection. The instrument uses a strain gauge weighing system, a robust principle that converts mechanical load into a stable electrical signal; this is particularly favourable in educational environments where routine accuracy and clear repeatability are required. Such specifications support documentation and traceability in basic laboratory and classroom workflows. Compact layout and straightforward operation reduce learning time A particularly flat housing and simple two‑button operation make handling intuitive for trainees and intermittent users. The LCD display with 15 mm high digits improves readability during demonstrations, while the ring-shaped draft shield and a weighing chamber of Ø×H 96×35 mm protect samples from air currents, improving measurement stability. For flexible deployment, the unit is supplied with standard 9 V battery power (batteries included) and accepts a plug-in power supply (220–240 V AC), offering both portable and bench-mounted operation without additional setup. Built for classroom use and light professional tasks The design emphasises ease of use and durability: a plastic housing with an electrically conductive finish on the weighing plate minimises electrostatic effects and the compact footprint (170×244×54 mm, weight 0.83 kg) simplifies storage and transport. Included accessories such as the hook for under-hook weighing expand functionality for density determinations or hanging loads, while an optional rechargeable battery can be fitted if prolonged mobile operation is required. As an entry-level laboratory balance, it is suitable for schools, vocational training, veterinary clinics, cosmetics sampling and basic quality control. Contact Metav Werkzeuge today to discuss a school-ready package with the KERN EMB 200-3, recommended accessories and compatible calibration solutions via info@metav-werkzeuge.com or by phone Technical data SKU: EMB.200-3 GTIN: 4045761111370 Manufacturer: KERN eCl@ss: 32120101 ETIM: EC002508 Tariff code: 90160010 Facts Weighing range: 200 g Readability: 0.001 g Linearity: ±0.005 g Reproducibility: 0.001 g Weighing pan diameter: 82 mm Weighing chamber Ø×H: 96×35 mm Display digit height: 15 mm Operating temperature: 5°C–35°C Max. relative humidity: 80% Weight: 0.83 kg Dimensions (W×D×H): 170×244×54 mm Battery life (with 9 V block): 12 h Input voltage: 220 V–240 V AC, 50 Hz Special features Housing: plastic Weighing plate: plastic, conductive coating Weighing system: strain gauge (Dehnungsmessstreifen) Ring-shaped draft shield included Hook for under-hook weighing included Simple two‑button operation Batteries included (9 V block) Optional rechargeable battery available Plug-in power supply supplied Entry-level model suitable for education and light QC Origin: CN FAQ What precision can be expected from this balance? The KERN EMB 200-3 offers a readability of 0.001 g, reproducibility of 0.001 g and linearity of ±0.005 g, providing reliable small-mass measurements for teaching and simple laboratory tasks. Is the balance suitable for mobile use in classrooms or field demonstrations? Yes. The unit is compact (170×244×54 mm), weighs 0.83 kg and is supplied with batteries included (9 V block), enabling portable operation; a plug-in power supply is also provided for bench use. Can the balance be used for density or under-hook weighing? A hook for under-hook weighing is supplied as standard, allowing hanging-load determinations and, together with appropriate accessories, supports density measurements for instructional applications. What protection against drafts does the instrument provide? The balance comes with a ring-shaped draft shield and a weighing chamber of Ø×H 96×35 mm, reducing the influence of air currents and improving measurement stability for small masses. What materials and environments are suitable for this model? The housing and weighing plate are made from plastic with a conductive finish on the plate to reduce static effects. The operating range is 5°C–35°C with up to 80% relative humidity, making it suitable for standard classroom and laboratory environments. KERN — Manufacturer (origin: CN)
200g Precision Compact Laboratory Balance 0.01g Readability, Stainless Steel Pan 105mm, LCD Display - KERN
Take advantage of high-precision readability, compact handling and reliable power options to streamline weighing tasks in the lab or workshop; order the instrument directly via Metav Werkzeuge or ask our consultants for tailored advice. KERN PCB.200-2 Compact laboratory balance — 200 g capacity, 0.01 g readability The KERN PCB.200-2 is a compact laboratory balance designed for precise weighing, piece counting and routine quality-control tasks in laboratories, inspection stations and small-scale production. 200 g capacity with 0.01 g readability Stainless-steel weighing pan, Ø 105 mm Battery operation and mains adapter included Strain-gauge system for stable results Precision where it counts The compact instrument delivers 0.01 g readability and a linearity of ±0.02 g, which together ensure repeatable results for fine analytical tasks. Built around a strain-gauge weighing system, the balance converts force into stable electrical signals, reducing drift and improving short-term reproducibility. The documented reproducibility of 0.01 g makes it suitable for routine laboratory checks and component verification, while the clear 15 mm LCD digits support quick reading of measured values. This combination of technical accuracy and simple readout speeds up decision-making in quality control and inventory tasks. Designed for efficient daily operation A practical layout and robust materials reduce downtime and simplify handling. The stainless-steel weighing pan (Ø 105 mm) resists corrosion and is easy to clean after repeated use. With a compact footprint (166 × 249 × 83 mm) and a total weight of 1.02 kg, the instrument fits easily on crowded benches or inspection tables. Power is flexible: the balance accepts a 9 V block battery with an estimated 20 h battery life and includes a mains adapter with CH, EU, UK and US plugs for international usability. The wide input range (100–240 V AC, 50/60 Hz) supports global workshop environments and reduces the need for additional converters. Reliable performance across common work conditions Built to perform under normal laboratory conditions, the balance operates between 5 °C and 35 °C and tolerates up to 80 % relative humidity. For piece-counting tasks, the instrument distinguishes very small parts, offering a smallest piece weight for lab counting of 20 mg and 200 mg under standard counting settings, which helps when controlling inventory of fasteners or precision components. The robust weighing system and durable pan mean consistent results even during frequent handling, giving technicians confidence when documenting batches or conducting incoming inspections. Choose the KERN PCB.200-2 for dependable precision and contact Metav Werkzeuge in Emmerich for buying advice or further technical details at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: PCB SKU: PCB.200-2 Manufacturer: KERN GTIN: 4045761084872 Measurements & performance Capacity: 200 g Readability: 0.01 g Reproducibility: 0.01 g Linearity: ± 0.02 g Weighing pan diameter: 105 mm Dimensions: 166 × 249 × 83 mm Weight: 1.02 kg Display digit height: 15 mm Operating temperature: 5 °C to 35 °C Max relative humidity: 80 % Battery life: 20 h Features & design Weighing pan material: stainless steel Weighing system: strain gauge Power: 9 V block battery or mains adapter Adapter plugs included: CH, EU, UK, US Input voltage: 100–240 V AC 50/60 Hz 0.5 A Smallest piece weight (counting lab): 20 mg Smallest piece weight (counting normal): 200 mg Origin: CN FAQ Is this balance suitable for accurate piece counting of small components? The KERN PCB.200-2 supports piece counting with a smallest piece weight of 20 mg under laboratory counting conditions and 200 mg in standard counting mode, making it suitable for small components and fasteners. What power options are available and how long does the battery last? The instrument accepts a 9 V block battery with approximately 20 h runtime and is supplied with a mains adapter compatible with CH, EU, UK and US plugs for flexible use. How precise and stable are measurements with this balance? This compact balance offers 0.01 g readability, 0.01 g reproducibility and ±0.02 g linearity, based on a strain-gauge weighing system designed for stable daily results. Can the balance be used at workshop benches or in ambient conditions? Yes; the device operates reliably between 5 °C and 35 °C with up to 80 % relative humidity, and its stainless-steel pan and compact form factor suit workshop and lab benches. KERN — Emmerich seller: Metav Werkzeuge, Emmerich am Rhein — info@metav-werkzeuge.com — +49 2822 7131930
200g Precision Laboratory Scale 0.01g Readability, 105mm Stainless Steel Pan, LCD, DMS, USP Compliant - KERN
Take advantage of the combination of laboratory-grade 0.01 g readability, a compact footprint and a stainless-steel weighing pan for precise results in small workspaces; order the balance directly via Metav Werkzeuge or contact our consultants for calibration and technical advice. KERN 440-33N compact laboratory balance — 200 g capacity, 0.01 g readability A compact precision laboratory balance, the 440-33N, designed for accurate weighing and percentage determination in laboratories and quality-control stations. Compact dimensions ideal for limited benchtop space Percent-determination for target-weight checks Draft shield included for stable measurements Stainless-steel weighing pan for easy cleaning Consistent precision for routine laboratory workflows The 440-33N delivers repeatable results with a readability of 0.01 g and reproducibility of 0.01 g, supported by a strain-gauge weighing system. Linearity is specified at ±0.02 g, which ensures deviations remain predictable across the weighing range. The balance therefore suits tasks that demand traceable, reproducible mass values, such as formulation checks, sample preparation and quality control. The Minimum Sample Weight is considered according to USP guidance; this offers a clear benchmark for when a measurement can be regarded as reliable for pharmaceutical or laboratory use. Space-efficient design with practical operation features With a compact footprint of 165×230×82 mm and a lightweight body of 0.95 kg, the instrument fits confined benches without compromising functionality. The stainless-steel weighing pan (Ø 105 mm) withstands routine cleaning and resists corrosion from typical lab reagents. An easy-to-read LCD with 15 mm digits and a protective draft shield included in the scope of delivery improve user ergonomics and measurement stability. The percentage-determination function simplifies tasks that require filling to a preset target (100 %) and immediately indicates deviation from that setpoint. Flexible power options and service-ready setup The balance can run from mains power (adapter set for CH, EURO, UK, US included) or from a 9 V block battery for up to 20 h operation when portability is required; charging time is 10 h. Input compatibility (100–240 V AC, 50/60 Hz) supports use in multi-region facilities. For regulated environments or when documented traceability is required, calibration services are available and the instrument’s design supports routine checks. Clear technical specifications and straightforward maintenance reduce downtime and help sustain productivity in busy labs. For tailored supply and expert advice on the KERN 440-33N compact laboratory balance, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to arrange delivery, documentation or calibration options. Technical data Article number: 440 SKU: 440-33N Manufacturer: KERN GTIN: 4045761012950 Country of origin: CN Tariff number: 90160010 eClass: 32120101 ETIM: EC002508 Key figures Readability: 0.01 g Capacity: 200 g Reproducibility: 0.01 g Linearity: ±0.02 g Minimum sample weight (lab counting): 20 mg Minimum sample weight (normal): 200 mg Pan diameter: 105 mm Weight: 0.95 kg Dimensions (W×D×H): 165×230×82 mm Display digit height: 15 mm Operating temperature: 5 °C–35 °C Maximum relative humidity: 80 % Battery type: 9 V block Battery operation time: 20 h Battery charging time: 10 h Mains input: 100–240 V AC 50/60 Hz 0.5 A Special features Weighing pan: stainless steel Weighing system: strain gauge (DMS) Draft shield included Percent-determination function Power adapters included: CH; EURO; UK; US Optional battery available Suitable for laboratory use and precision weighing FAQ What is the smallest increment that can be reliably read? The smallest readable increment is 0.01 g; reproducibility is also 0.01 g, making the balance suitable for fine analytical tasks with stable results. Is a draft shield supplied with the balance? Yes, the KERN 440-33N is delivered with a protective draft shield to reduce the influence of air currents on small-mass measurements. Can the balance run without mains power? Operation from a 9 V block battery is possible; the battery runtime is approximately 20 h, and an adapter set for multiple regions is supplied for mains operation. Does the instrument offer percentage weighing? The percent-determination function is built in, enabling weighing to a predefined reference (100 %) and instant display of any deviation from that target. What calibration options are available for this model? Calibration can be performed by qualified service providers; documented calibration supports traceability for regulated environments and routine quality checks. KERN — Origin: China — Contact: not provided
200g Wood Case For Individual Weight Sets Unpadded, For Classes F2‑M3 - KERN
Conflicting product information has been detected: the specification simultaneously indicates the wooden case is supplied both padded and unpadded, which prevents creation of a reliable product description. This inconsistency in the provided details makes it challenging to ensure the accuracy and completeness of the product listing. Please clarify whether the case is provided padded or unpadded, as this information is essential for producing a full, accurate, and trustworthy description. Resolving this issue will help avoid confusion for potential customers and ensure the product is represented correctly in all listings and promotional materials.
200g Wooden Case For Custom Calibration Weights, Padded - KERN
Take advantage of the combination of custom-fit organisation, padded protection and a production-friendly design to keep calibration weights organised and ready for use. Order directly via Metav Werkzeuge or consult our advisors for specification support. Wooden case for individual weight sets KERN 315-040-100 — padded, for nominal values ≤ 200 g The Wooden case for individual weight sets is a tailored storage solution for calibration weights, designed for safe transport and secure organisation in metrology environments. *Customised layout for individual weight sets *Padded interior for safe storage *Suitable for classes E1–F1 *For nominal values up to 200 g Secure protection that preserves calibration accuracy The wooden housing with a padded interior provides a stable, vibration-damping environment that helps to maintain the dimensional and mass integrity of precision weights. Wooden enclosures are valued in calibration contexts because the material is dimensionally stable and gentle on sensitive surfaces; combined with the internal padding, the result is reduced risk of nicks, scratches and dust ingress. For weights used in E1, E2 and F1 classes, consistent handling and storage are part of ensuring repeatable measurement results, so choosing a case that minimises mechanical stress supports long-term accuracy and reduces service interruptions. Configured to match individual inventory and workflow KERN supplies the case with tailored drilling and foam padding according to the specified weight configuration, enabling a customised layout that mirrors how sets are used on the bench. Fewer transfers between trays and less time spent searching for the right piece lead to a smoother calibration routine and faster throughput. Because these are made-to-order enclosures, the internal arrangement can be specified to match compact or button-style weights and to support class labelling; please note that bespoke production ensures a perfect fit but means the item is non-returnable. Practical handling and professional presentation The compact wooden case combines a robust exterior with lightweight handling (approx. 0.68 kg), creating a portable solution for technicians and calibration laboratories. A neat, purpose-fit interior keeps weights organised for quick checks and transport between stations, while the wood finish presents a professional impression for customer demonstrations or audit visits. The design reduces accidental contact during handling, which in turn lowers the likelihood of repeated recalibrations and contributes to efficient workshop routines. Contact Metav Werkzeuge in Emmerich for a bespoke configuration and swift dispatch; our consultants will advise on the best layout for the required weight classes and nominal values. Technical data Article number: 315-040-100 SKU: 315-040-100 GTIN: 4045761003347 Manufacturer: KERN Country of origin: DE Tariff code: 84239090 Facts Material weight: 0.68 kg For nominal values: up to 200 g Suitable for classes: E1, E2, F1 Product category: cases & etuis (for calibration weights) Special features Material: wood Interior: padded foam Configurable: drilled and padded to customer specification Note: made-to-order universal cases; non-returnable FAQ Is the case suitable for E2-class calibration weights? Yes. The wooden case is suitable for E1, E2 and F1 classes and is configured to accommodate weights with nominal values up to 200 g; refer to SKU 315-040-100 for ordering. Can the interior be adapted to different weight arrangements? Yes. KERN supplies the enclosure with drilled foam inserts and padding according to the specified arrangement, enabling a customised layout tailored to the set composition. Are these wooden cases returnable if the layout is customised? No. These universal wooden cases are produced as special orders and therefore are excluded from returns; this ensures a one-to-one fit for the specified weight set. What material is used and how does it protect sensitive weights? The case is made of wood with a padded interior; the combination provides a stable, low-abrasion environment that minimises mechanical impact and helps preserve calibration integrity. KERN — Germany; Metav Werkzeuge, Emmerich am Rhein; info@metav-werkzeuge.com; +49 2822 7131930
200g Wooden Case For Single Calibration Weights, Padded, For Class E1–F1 - KERN
Take advantage of the combination of secure, padded storage and precise fit for single calibration weights to protect measurement assets and streamline handling. Order the wooden case directly via Metav Werkzeuge or ask our consultants if additional technical information is required. KERN 317-080-100 Wooden case for single weights — padded, for 200 g (E1–F1) The Wooden case provides a compact, padded storage solution for single calibration weights, designed specifically for button/compact 200 g weights in accuracy classes E1–F1 Padded interior for gentle weight protection Fits single 200 g button/compact weights Suitable for accuracy classes E1–F1 Compatible with common KERN single-weight models Protect valuable calibration masses with secure, cushioned storage A dedicated wooden case offers practical protection for calibration weights, reducing the risk of nicks and contamination that can affect measurement accuracy. The padded interior cushions each mass, preventing movement during transport and storage, which helps maintain the certified condition of weights in the 200 g range. Compatible KERN models are accommodated by precision-cut compartments, ensuring a snug fit for button/compact forms and avoiding the need for improvised packaging that can accelerate wear. Reduce handling time and simplify workshop workflow Organising single weights in a purpose-built case speeds up routine procedures in the metrology lab or workshop. The compact format groups the required mass within easy reach, shortening preparation time for calibrations and checks. Because the box is designed for weights in classes E1–F1, technicians gain reliable repeatability for high-precision tasks; the arrangement supports efficient inventory control and rapid identification during audits or testing sequences. Durable materials, precise fit and consistent quality assurance The wooden construction combines a traditional material with functional design: hard-wearing exterior, inner padding and tailored recesses protect both the surface and geometry of each mass. Originating from Germany, this storage solution complements established calibration equipment and preserves traceability by keeping weights in a single, dedicated container. The compact form factor and light own weight make it straightforward to store on calibration trolleys or in secure cabinets without adding bulk. Secure the KERN wooden case for single weights through Metav Werkzeuge — for product details or technical clarification contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 317-080-100 SKU: 317-080-100 GTIN: 4045761003675 Manufacturer: KERN Origin: DE Facts Weight: 0.21 kg Compatible nominal weight: 200 g Customs tariff number: 84239090 Accuracy classes: E1–F1 Special features Material: wood Padded interior For single weights (button/compact) Compatible with KERN 307, 316, 317, 326, 327, 329 FAQ Which nominal weights fit this case? The wooden case is designed for single 200 g masses in button/compact form and accommodates weights certified in accuracy classes E1–F1. Is the interior suitable for transport? Yes, the padded interior protects weights from shocks and movement, making the case suitable for routine transport within workshops and between calibration stations. Which manufacturers or models are compatible? The case fits a range of KERN single-weight models including 307, 316, 317, 326, 327 and 329, with compartments tailored for button/compact designs. What material and origin does the case have? The case is made from wood with a padded lining and originates from Germany. KERN — Germany; Distributor contact: Metav Werkzeuge — info@metav-werkzeuge.com / +49 2822 7131930
200g Wooden Case for Single Weights Button/Compact, Unpadded - KERN
The compact wooden case combines precise compatibility with a lightweight design and an unpadded interior, making it a practical choice for safe storage of 200 g single calibration weights; order the wooden case directly via Metav Werkzeuge or ask our consultants if needed. Wooden case for single weights KERN 337-080-200 — 200 g, unpadded Wooden case for single weights KERN 337-080-200 is a purpose-built storage solution for compact/button-style calibration masses, designed for workshop use and secure transport. Wooden case for single calibration weights Fits KERN 337, 347, 357 and 367 families Designed for 200 g single weights Unpadded interior for compact storage Protecting measurement integrity with compact storage A sturdy wooden enclosure preserves the condition of calibration weights while keeping the footprint minimal. The case supports accurate routine handling of 200 g single masses by providing a dedicated, stable position for a single reference weight, reducing the risk of accidental knocks or contamination. The natural rigidity of the material contributes to durability and simple repairability compared with softer plastics, while the compact format helps maintain traceability within a busy workshop environment. This combination supports faster workflow and lower handling risk during calibration cycles. Compatibility that streamlines workshop processes The design matches the dimensional requirements of common KERN single-weight series, functioning with the 337, 347, 357 and 367 families and the compact/button style masses. Clear physical compatibility eliminates wasted searching and cross-checking, allowing measurement technicians to store a standard reference weight ready for verification tasks. The simple form factor aids in systematic storage on calibration trolleys or in inventory cabinets, supporting orderly procedures and reducing preparation time before checks. Practical handling and straightforward maintenance for daily use The case is intentionally unpadded, favouring compactness and a low overall weight of 0.19 kg, which makes it easy to move between workstations or to include in a mobile calibration kit. As an unpadded solution, it pairs well with controlled handling routines and clean storage practices; when extra cushioning is required, an internal foam insert can be sourced separately to suit laboratory standards. Manufactured in Germany from quality wood, the case offers a balance of workshop-suitable robustness and straightforward upkeep—simple surface cleaning and dry storage are sufficient to keep the enclosure serviceable over extended use. For tailored advice on compatibility with existing calibration equipment or to request delivery from Metav Werkzeuge in Emmerich, please contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data SKU: 337-080-200 GTIN: 4045761006430 Manufacturer: KERN Weight: 0.19 kg Fits nominal mass: 200 g HS code: 84239090 Material: Wood Interior: Unpadded Compatible with: single weights (button/compact) of KERN 337, 347, 357, 367 FAQ Is the interior padded? The interior of the wooden case is unpadded; the design prioritises compact storage and lightweight handling for the 200 g single mass. Which weight types fit the case? The case is intended for single calibration weights in the compact/button form and is compatible with items from the KERN 337, 347, 357 and 367 families. Can the case be used for transport? The wooden case provides secure, compact storage for local transport, though additional internal cushioning is recommended for extended shipping or heavy handling. What is the product's origin and manufacturer? The case is supplied by KERN and manufactured in Germany. Is the SKU 337-080-200 suitable for calibration cabinets? SKU 337-080-200 is designed for workshop storage and fits standard racks or cabinets used for single calibration weights. KERN — Germany — Contact via Metav Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930
200kg Bending‑Shear Load Cell Stainless Steel, 2 mV/V, IP68/IP69K - KERN
Data inconsistency detected: the headline lists brand "SAUTER" while the manufacturer field specifies "KERN" — please verify the source data. This discrepancy may indicate an error in the input or a mismatch between the branding and manufacturing details provided. It is essential to cross-check the original source to ensure accuracy and consistency in the data. Such inconsistencies can lead to confusion or misrepresentation, particularly in cases where branding and manufacturing play a critical role in product identification. Please review the documentation or consult the relevant parties to confirm the correct information and rectify any inaccuracies promptly.
200kg Hanging Scale 0.1kg Readability Peak-Hold, Stainless Steel Hook & Karabiner, LCD 12mm - KERN
Take advantage of a compact, TÜV‑certified hanging scale that combines a 200 kg capacity with 0.1 kg readability and a long battery runtime for reliable control weighing in logistics and workshops. Order directly via Metav Werkzeuge or request tailored advice from their consultants. KERN HCB 200K100 Hanging Scale — 200 kg capacity, 0.1 kg readability A KERN HCB 200K100 hanging scale designed for fast control weighing in warehouse logistics, workshops and outdoor tasks such as hunting and fishing 200 kg range with 0.1 kg readability TÜV-certified to EN 13155 and EN 61010-1 Hold and peak‑hold functions for clear readings Stainless-steel carabiner and hook, safety lock Robust capacity with professional weighing performance The hanging instrument offers a 200 kg weighing range combined with a 0.1 kg graduation, providing a balance between capacity and resolution that suits incoming/outgoing goods checks and heavier workshop parts. The measuring element is a strain‑gauge load cell, delivering consistent signals that result in a repeatability of 0.1 kg and a linearity of ±0.2 kg. The device registers measurements at 5 Hz, which is sufficient for stable load readings while reducing display jitter during handling. This technical set-up supports rapid decision-making in quality control processes and reduces the need for repeated measurements. Easy reading and safe handling for everyday use An LCD display with 12 mm digit height ensures values remain legible at a distance, while the integrated Hold and Peak‑Hold functions allow the weight to be frozen automatically or manually for convenient documentation. The scale is supplied with a stainless‑steel carabiner and hook featuring a safety lock, simplifying secure attachment and minimising slippage risks when lifting. At just 0.26 kg device weight and powered by three AA cells with an approximate runtime of 300 h, the unit is portable and ready for long shifts without frequent battery changes. Operational limits are 5 °C to 35 °C and up to 80% relative humidity, matching common indoor and sheltered outdoor environments. Certified safety and uninterrupted workflow Safety and electrical compliance are covered: the instrument carries TÜV certification to EN 13155 (loose lifting attachments/break safety) and EN 61010‑1 (electrical safety), which supports use in professional environments where documented conformity is required. The strain‑gauge system and clear specification of reproducibility and linearity provide traceable performance data for routine checks. Simple battery replacement and the compact housing design reduce maintenance time and help keep weighing operations flowing with minimal interruption. Contact Metav Werkzeuge in Emmerich for expert advice and reliable supply of the KERN HCB 200K100 hanging scale; technical consultants are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930, with WhatsApp at +49 170 2837271 Technical data Article number: HCB SKU: HCB.200K100 GTIN: 4045761069039 Manufacturer: KERN Origin: CN Facts Weighing range: 200 kg Readability (d): 0.1 kg Reproducibility: 0.1 kg Linearity: ±0.2 kg Display digit height: 12 mm Measurement frequency: 5 Hz Power supply: 3×1.5 V AA Battery running time: 300 h Device weight: 0.26 kg Operating temperature: 5 °C – 35 °C Max. relative humidity: 80% Dimensions (without removable parts): 82 × 43 × 153 mm Tariff number: 84238220 EClass: 27320106 Special features Display type: LCD Weighing system: strain‑gauge load cell Certifications: TÜV to EN 13155 and EN 61010‑1 Hold function: automatic and manual freeze Peak‑hold function (spike/peak display) Stainless‑steel carabiner with safety lock and stainless‑steel hook Suitable applications: construction sites, warehouse logistics, workshops, food industry, hunting, small animal weighing and breeding FAQ How accurate is the KERN HCB 200K100 for control weighing? The KERN HCB 200K100 provides a readability of 0.1 kg with a reproducibility of 0.1 kg and linearity of ±0.2 kg, suitable for routine control weighing and inventory checks. What power source does the scale use and how long does it last? The hanging scale runs on 3×1.5 V AA batteries and achieves approximately 300 h of operation under standard conditions. Is the unit safe for professional lifting and handling? Yes. The scale is TÜV‑certified to EN 13155 (loose lifting attachments) and EN 61010‑1 (electrical safety), supporting safe use in professional environments. Can the device be used outdoors for hunting or weighing fish? The instrument is suitable for outdoor sheltered use within its operating range (5 °C–35 °C, max. 80% humidity) and is frequently used for fishing, hunting and similar tasks. What mounting and handling accessories are included? The scale is supplied with a stainless‑steel carabiner featuring a safety lock and a stainless‑steel hook for secure attachment during weighing. Manufacturer: KERN — Address: not provided — Contact: not provided
200kg Hanging Scale IP65, 0.5kg Readability, Stainless Steel Housing, Peak‑Hold, Carabiner Hook - KERN
Robust stainless-steel construction with IP65 protection and clear 0.5 kg readability ensure reliable, fast control weighing in busy production and logistics areas; order the unit directly via Metav Werkzeuge or contact our consultants for tailored advice. KERN HCN 200K500IP Hanging scale — 200 kg capacity, IP65 stainless-steel The KERN HCN 200K500IP is a compact hanging scale designed for rapid control weighing across logistics, fisheries and industrial environments, offering practical features for daily use. 200 kg capacity, 0.5 kg readability Stainless-steel housing with IP65 protection TÜV-certified to EN 13155 and EN 61010-1 Hold and Peak-Hold functions for easy reading Stainless-steel carabiner and hook included Fast, dependable checks to keep workflows moving The instrument combines a high 200 kg capacity with a clarity of 0.5 kg readability, enabling swift acceptance and dispatch checks without time-consuming transfers to bench scales. The measurement chain uses a strain gauge system and an internal frequency of 5 Hz, which guarantees stable indications even when loads are slightly moving; this reduces re-weigh cycles and speeds up throughput. By delivering repeatable results at a practical resolution, the unit supports efficient quality control and inventory handling in busy operations. Built to withstand dust, spray and frequent handling Engineered with a stainless-steel casing and IP65 ingress protection, the hanging scale resists dust ingress and water spray, making it suitable for environments such as packing areas, fish markets and sheltered outdoor sites. Compliance with TÜV requirements — specifically EN 13155 and EN 61010-1 — confirms both mechanical safety for loose-load lifting components and electrical safety for workplace use. The compact footprint (96 × 48 × 179 mm) and robust build ensure longevity under regular use while keeping handling simple and safe. Practical functions for clear readings and secure handling A clear LCD with 12 mm high digits, combined with Hold and Peak-Hold modes, simplifies reading transient loads or capturing peak weights from swinging items; these functions minimise handling and measurement error. Power is supplied by 2×1.5 V AA batteries with a battery life 200 h, supporting long inspection cycles without frequent battery changes. Performance characteristics such as ±1 kg linearity and reproducibility 0.5 kg are provided to help integrate the scale into existing quality routines and documentation, ensuring measurements can be referenced confidently in operations and records. For expert advice on integrating the KERN HCN 200K500IP into your workflow or to reserve stock, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: HCN.200K500IP Manufacturer: KERN GTIN: 4045761083950 Article number: HCN Numbers / Core technical data Weighing range max: 200 kg Readability: 0.5 kg Product weight: 0.5 kg Dimensions: 96 × 48 × 179 mm Display digit height: 12 mm Display type: LCD Battery: 2×1.5 V AA Battery operating time: 200 h Operating temperature: 5 °C–35 °C Max humidity: 80% Linearity: ± 1 kg Reproducibility: 0.5 kg Designs / Special features Housing: stainless steel Protection class: IP 65 Weighing system: strain gauge Hold and Peak-Hold functions Stainless-steel carabiner and hook included TÜV: EN 13155, EN 61010-1 Measurement frequency: 5 Hz FAQ What is the smallest weight increment this scale shows? The KERN HCN 200K500IP provides a readability of 0.5 kg, making it suitable for routine control weighing where half-kilogram increments meet process requirements. Is the scale suitable for damp or dusty environments? Yes. The stainless-steel construction combined with IP65 protection protects against dust and water spray, so the instrument performs reliably in packing halls, fish processing areas and similar environments when used within the specified temperature range. How is the unit powered and how long does the battery last? The unit runs on 2×1.5 V AA batteries and achieves a typical battery life of 200 h, reducing downtime for battery changes during regular use. Which safety and electrical standards does it meet? The hanging scale is TÜV-certified and complies with EN 13155 for loose-load lifters and EN 61010-1 for electrical safety, reflecting verified mechanical and electrical safety features. For which applications is this hanging scale recommended? This hanging scale is intended for quick control weighing in logistics and warehousing, the food and fisheries sectors, construction sites and agricultural settings where a compact, robust instrument is required. KERN — Origin: CN. Metav Werkzeuge, Emmerich am Rhein | info@metav-werkzeuge.com | +49 2822 7131930
200kg Test Weight Stackable, OIML Class M1, Painted Cast Iron - KERN
Benefit from OIML M1 accuracy, a 200 kg nominal mass and a robust painted cast iron construction combined with a stackable design for safe storage; Order the KERN 346-82 heavy-duty calibration weight directly via Metav Werkzeuge or ask our consultants if needed. KERN 346-82 Heavy-duty calibration weight — 200 kg, OIML M1 A KERN 346-82 heavy-duty calibration weight designed for industrial scale calibration and verification tasks, featuring a painted cast iron finish and stackable construction for efficient workshop handling. OIML class M1 accuracy 10 g tolerance Nominal mass 200 kg for heavy-load scales Painted cast iron for durable handling Stackable design for secure storage Precision that meets industrial calibration demands The mass standard delivers OIML M1 conformity with a stated tolerance of 10 g, making it suitable where certified accuracy is required for heavy-load balances and large industrial scales. The declared tolerance indicates the permissible deviation at the nominal value, providing a clear reference when comparing measurement uncertainty. For laboratories and production facilities seeking reproducible results, the calibrated mass serves as a reliable reference that supports consistent process control and traceability across weighing procedures. Durable construction for everyday workshop use Manufactured from painted cast iron, the weight combines surface protection with mechanical robustness, lowering the risk of corrosion and surface damage during handling. The finish reduces maintenance needs while preserving the calibrated surface. Its stackable geometry simplifies storage and reduces occupied floor space, supporting efficient logistics and quick availability in busy calibration rooms or production floors. These characteristics help maintain equipment uptime and reduce the manpower required for handling and storage. Practical integration into calibration workflows Designed as a heavy-duty mass standard, the unit integrates with floor and platform scales used in industrial settings, facilitating routine verification cycles and in-house checks. Clear specification of 200 kg nominal mass and M1 classification enables straightforward selection when conformity to standards is necessary for audits or internal quality assurance. The rugged design and stackability also contribute to safer handling and simplified transport between weighing stations, lowering operational friction and saving time during scheduled calibration tasks. Secure reliable calibration with the KERN 346-82 heavy-duty 200 kg weight — contact Metav Werkzeuge in Emmerich for procurement and technical advice via info@metav-werkzeuge.com or by telephone at +49 2822 7131930 Technical data Article number: 346 SKU: 346-82 GTIN: 4045761008397 Manufacturer: KERN Origin: DE Tariff code: 84239090 Core specifications Nominal value: 200 kg Tolerance (OIML M1): 10 g Material: cast iron, painted OIML class: M1 Design and features Stackable Heavy-duty mass standard Painted finish FAQ What accuracy class does this calibration weight comply with? The weight complies with OIML M1 accuracy; the KERN 346-82 is specified with a tolerance of 10 g at the nominal value. Is the 200 kg unit suitable for industrial platform scales? Yes, the 200 kg nominal mass is designed for heavy-load scales and platform balances used in industrial environments. What material and surface protection does the weight have? The KERN 346-82 is made from cast iron with a painted finish, offering mechanical robustness and improved resistance to surface wear. Can the weight be stored compactly when not in use? The product features a stackable design that reduces storage footprint and facilitates organised handling in calibration rooms. Does the product support traceable calibration procedures? As an M1-class calibration weight with defined tolerance, the unit is suitable for routine verification and supports traceability within an established calibration programme. KERN; Origin: Germany. For orders and enquiries: Metav Werkzeuge, Emmerich am Rhein — Email: info@metav-werkzeuge.com — Tel: +49 2822 7131930
200mm Height Stand For SFE Platform Scale, For IP-Protected Units - KERN
Take advantage of a compact, reliable stand that raises the indicator by 200 mm for improved readability and ergonomic operation; its compatibility with IP-protected KERN SFE platform scales and lightweight construction (approx. 0.59 kg) make it a practical choice for workshop integration — order the stand directly via Metav Werkzeuge or consult our specialists for application advice. Stativ SFE-A01 – Stand for KERN SFE, 200 mm height, lightweight The Stativ SFE-A01 provides a simple, robust mounting solution for KERN SFE platform weighing systems by elevating the indicator unit to enhance visibility and workflow in workshop and industrial settings. Raises display by approx 200 mm Compatible with IP-protected KERN SFE Suitable for 300×240×110–650×500×140 mm plates Lightweight at approx 0.59 kg Improved readability and operator ergonomics Elevating the indicator by 200 mm removes the need for frequent craning or repositioning of components during weighing tasks. The raised bracket offers a clear line of sight to the display, reducing handling time and the risk of reading errors; this contributes directly to productivity gains in routine checks and repetitive measurements. The compact, elevated mount is especially useful where bench space is limited, delivering a practical combination of visibility and space efficiency. Fast integration into existing KERN setups Designed specifically for use with KERN SFE platform scales, the stand accepts models with weighing-plate dimensions from 300×240×110 mm up to 650×500×140 mm, enabling straightforward retrofitting without major alterations to the workbench. The accessory supports secure mounting of the indicator to maintain stable readings during use, preserving the accuracy of the base scale. Clear compatibility and simple installation translate into less downtime and predictable workflow improvements. Workshop-proven reliability and lightweight handling With a weight of approximately 0.59 kg, the stand is easy to handle during installation and relocation while still providing stable support for the indicator unit. Manufactured for integration with IP-rated platform systems, it assists in maintaining an organised, ergonomic workstation that helps technicians focus on measurement tasks rather than equipment adjustments. For operations seeking dependable components that streamline daily procedures, this stand is a low-effort enhancement that improves usability and efficiency. For precise mounting solutions from a trusted partner, request the KERN SFE-A01 stand through Metav Werkzeuge — our consultants in Emmerich will advise on fitment and delivery to ensure a seamless upgrade to existing weighing equipment. Technical data Article number: SFE-A01 Manufacturer: KERN GTIN: 4045761144781 Origin: CN Tariff code: 73269098 eClass: 21170601 Core technical data Weight: 0.59 kg Height: approx. 200 mm Suitable plate sizes: 300×240×110 mm to 650×500×140 mm Special features Compatible with IP-protected platform scales KERN SFE Stand for elevating the indicator unit Lightweight design for simple handling FAQ Is the stand compatible with KERN SFE platform scales? The stand is compatible with IP-protected KERN SFE platform scales and is intended to elevate the indicator unit for improved visibility. What height does the stand provide? The stand provides an elevation of approximately 200 mm to raise the display into a more ergonomic viewing position. Which weighing-plate sizes are supported? Suitable for models with weighing-plate dimensions from 300×240×110 mm up to 650×500×140 mm. How heavy is the stand? The stand weighs approximately 0.59 kg, making it easy to handle during installation. Where is the stand manufactured? The product originates from China (CN) and is supplied under the KERN designation SFE-A01. Manufacturer: KERN — Origin: China — Contact: info@metav-werkzeuge.com | +49 2822 7131930
Accurate weighing that keeps production consistent
Scales are measuring instruments that determine the weight, force or count of an object and are essential across workshops and production lines. From precision scales that resolve fractions of a milligram to crane scales that handle several tonnes, the right weighing equipment ensures process reliability, legal compliance and operational efficiency.
How the right scale supports your workflow
Scales convert mechanical or electronic signals into repeatable weight values; external factors such as local gravity, magnetism, air buoyancy and vibration influence the result and often require site-specific adjustment. For legally binding measurements a statutory verification is required, while routine quality assurance is achieved through documented calibration. Choosing the correct combination of measuring range and readability avoids unnecessary sensitivity and stabilises throughput.
Practical advantages you notice every day
- Fast, reproducible results that reduce rework and speed up throughput.
- Better process control through repeatability and consistent stabilisation times.
- Compliance where required: support for statutory verification and DAkkS-accredited calibration services.
- Lower downtime via robust designs for industrial environments and user-friendly tare functions.
- Versatility across applications with options such as precision scales, analytical balances, platform scales, counting scales and checkweighers.
Premium measurement from a trusted partnership
KERN & SOHN represents a long-established premium choice for precise weighing and metrology, offering an extensive range of instruments and accredited services. Metav acts as your procurement and quality filter from Emmerich: decades of expertise, over 48,000 customers and a catalogue of more than 250,000 products ensure reliable supply and consolidated sourcing for industry, trade and crafts.
Key technical data at a glance
- measuring range: from sub-milligram to multiple tonnes
- readability (d): smallest display step, determines sensitivity
- linearity: specification for deviation across the measuring range
- tare: container weight subtraction, essential for net weight determination
- environmental influences: gravity, magnetism, air buoyancy, vibration, temperature, draught
- common types: precision scales, analytical balances, platform scales, counting scales, checkweighers
- verification vs calibration: statutory verification required for legally relevant weighing; calibration for traceable quality assurance
- application areas: laboratory, production, warehouse, shipping, retail, gastronomy
FAQ
What does readability (d) mean for scales?
Readability is the smallest weight increment a scale displays. For precision scales, a smaller readability gives finer resolution but increases sensitivity to draughts and vibration.
What is the difference between accuracy and repeatability?
Accuracy describes how close a measured value is to the true value; repeatability describes how consistently a scale returns the same result under identical conditions. Both matter, but repeatability is often decisive for stable production processes.
When do I need a verified (statutory) scale?
A verified scale is required whenever weight determines legal transactions, for example sales by weight. For internal quality control, a documented calibration is typically sufficient.
Why does my scale show fluctuating values despite correct operation?
Fluctuations are often caused by environmental factors: air draught, nearby vibration, temperature changes or an unstable support. Site selection and appropriate housing or wind protection reduce this effect.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com