Precise angle measurement for reliable machining setups
Angle measuring instruments and their variants such as inclinometers, goniometers and protractors provide exact determination of inclinations to ensure dimensional accuracy and process stability in metalworking and machine building. Designed for workshop use or laboratory quality control, these devices enable precise alignment of components and transfer of angle values onto workpieces, with options ranging from robust mechanical protractors to high-resolution digital inclinometers. Features like zeroing, hold and reverse display modes support efficient serial inspection and machine setup, while materials such as matt-chromed special steel or anodised aluminium ensure durability and resistance to coolants and workshop conditions.
150 mm Spirit Level, 0.02 mm/m Prismatic Base, Special Cast Iron, Supplied in Case - Metav IndustryLine
Take advantage of precision and compact design: a 150 mm instrument with 0.02 mm/m sensitivity provides swift, reproducible alignment for machine set‑ups and fixtures; its prismatic base permits reliable measurement on edges and shafts. Order the instrument directly via Metav Werkzeuge or consult our advisers for application support. Precision spirit level M215.101 – 150 mm, 0.02 mm/m (Metav IndustryLine) The precision spirit level M215.101 is a compact angle and alignment tool designed for workshop and machine‑room use, offering fine sensitivity and a prismatic base for accurate contact with profiles and cylindrical surfaces 0.02 mm/m sensitivity for micro‑adjustments 150 mm compact length for confined spaces Prismatic base for edge and shaft alignment Special cast iron body for thermal stability Precise measurement that reduces setup time With a rated sensitivity of 0.02 mm/m, this instrument makes tiny angular deviations visible and measurable: a tilt that causes 0.02 millimetres of offset over one metre is shown clearly, enabling controlled adjustments during machine set‑up or jig alignment. The combination of high resolution and a short, rigid body reduces the number of iterative checks, which translates into measurable time savings on recurring alignment tasks. For industrial workshops the pragmatic result is fewer machine stops and steadier production quality. A construction built for repeatability The body is cast from special grey cast iron, chosen for its dimensional stability and low thermal drift under typical shop conditions; this yields repeatable readings across a range of ambient temperatures. The prism base provides a defined contact geometry for measuring on edges, shafts or rounded profiles without slipping, so readings remain consistent. The instrument’s compact form factor preserves stiffness, helping to achieve the stated sensitivity in everyday use rather than only in laboratory conditions. Compact handling with broad workshop utility At 150 mm length the level balances reach and manoeuvrability: long enough to span small assemblies, yet short enough for confined setups and one‑handed positioning. The prismatic contact surface aids alignment tasks on both flat and curved workpieces, making the tool suitable for bench mechanics, toolroom work and quick checks on machine tables. The robust casting and clear sensitivity rating make this a practical choice where reliable, repeatable orientation is required rather than elaborate metrology infrastructure. Choose the Metav IndustryLine precision spirit level for accurate, repeatable alignment and contact Metav Werkzeuge in Emmerich for specification advice and delivery from stock. Technical data Article number: M215.101 GTIN: 4054469109749 ECLASS: 21160113 ETIM: EC000145 Customs tariff number: 90153090 Facts Length: 150 mm Sensitivity / reading: 0.02 mm/m Material: Special grey cast iron Category: Angle measuring device Special features Prismatic base for edge and shaft contact Compact, rigid body for repeatable readings Suitable for workshop and machine‑room alignment FAQ How fine is the sensitivity of this spirit level? The precision spirit level M215.101 has a sensitivity of 0.02 mm/m, which indicates the instrument shows a 0.02 mm offset over a one‑metre length and is intended for fine alignment tasks. Is the level suitable for use on cylindrical shafts? Yes, the tool’s prismatic base is specifically designed to make stable contact with round or profiled surfaces for reliable alignment of shafts and edges. What workshop applications suit this instrument best? This compact level is aimed at machine‑room set‑ups, fixture alignment, bench adjustments and quick checks where a 150 mm rigid tool with fine sensitivity improves repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm 360° Angle Measuring Device With Magnifier, Fine Adjustment, Three-Point Accessory - Metav IndustryLine
Take advantage of precise, repeatable angle inspection with a 360° dial and 10' angular accuracy for consistent setup and reduced rework; the parallax‑free scale with integrated magnifier and fine adjustment shortens alignment time. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. TOP angle measuring instrument M214.091.T — 360° dial with 150 mm beam, magnifier and fine adjustment (Metav IndustryLine) The TOP angle measuring instrument M214.091.T is an analogue 360° angle gauge with a 150 mm beam, designed for accurate angle layout and inspection in metalworking, toolrooms and precision assembly applications. 360° analogue dial with 10' accuracy 150 mm hardened linear beam Parallax-free reading with integrated magnifier Fine-adjustment and auxiliary angle attachment Precise readings that support quality control and process stability The instrument provides a 360° dial combined with a fine scale resolution of 1/12° and an accuracy of 10' (ten arcminutes), which makes it suitable for routine angle inspection and setup tasks where reproducibility matters. The analogue display is parallax‑free, supported by an integrated magnifier, so small graduations are easy to read without ambiguous parallax error; this reduces measurement uncertainty and helps to avoid costly rework in production. By converting improved angular certainty into fewer adjustment cycles, the device contributes directly to shorter machine downtime and higher first‑pass yield. Ergonomic handling for quicker alignment and repeatable adjustment Built around a 150 mm beam with a compact cross‑section, the gauge balances reach and stiffness for workshop use: the moderate beam length is long enough for most fixture and component checks while remaining easy to manoeuvre at 0.6 kg weight. The fine adjustment mechanism and the supplied auxiliary angle attachment enable controlled, repeatable settings during fitting and inspection sequences. As a result, set‑up operations become faster and less dependent on operator feel — the measurable control provided by the fine feed reduces variation between shifts and operators. Robust layout, safe transport and long service life The analogue construction keeps the instrument straightforward to maintain: there are no electronic components to fail, and the mechanical dial delivers tactile feedback that many technicians prefer for layout tasks. Delivery includes a protective transport box to safeguard the device during storage and transit. The fourfold 90° measurement range (4×90°) expands applicability to multi‑quadrant checks without re‑zeroing, and the overall compact format supports frequent use on the shop floor. Together these design choices provide a low‑maintenance, dependable solution for routine angle control. Contact Metav Werkzeuge for tailored application advice and secure this TOP angle measuring instrument with 360° dial and fine adjustment from Metav IndustryLine, shipped from Emmerich to your workshop Technical data SKU: M214.091.T GTIN: 4054469106526 Tariff number: 90178090 Category: Angle measuring devices Manufacturer: Metav IndustryLine Numbers / Core technical data Beam length: 150 mm Reading (degrees): 1/12° Accuracy: 10' (arcminutes) Measurement range: 4 × 90° Weight: 0.6 kg Cross-section: 16 × 2.5 mm Designs / Special features Analogue 360° dial Parallax-free reading Integrated magnifier Fine-adjustment mechanism Auxiliary angle attachment Delivered in protective transport box FAQ What level of angular accuracy does the instrument provide? The instrument achieves an accuracy of 10' (ten arcminutes), suitable for precise workshop alignment and inspection tasks with the TOP angle measuring instrument M214.091.T. Which measurement range is covered by the device? The device covers a fourfold 90° range (4×90°), allowing checks in all quadrants without repeated re‑zeroing. Is the scale easy to read under workshop light conditions? Yes, the analogue dial is parallax‑free and fitted with an integrated magnifier, improving legibility of fine graduations on the scale. Does the instrument include any accessories for setup and transport? Delivery includes a protective transport box and an auxiliary angle attachment for smaller angles, ensuring safe storage and flexible use in the workshop. How portable and manageable is the gauge for daily use? With a beam of 150 mm and a weight of 0.6 kg, the gauge offers a balance of rigidity and portability for frequent handling during assembly and inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Frame Spirit Level, 0.1 mm/m Accuracy, Prismatic Bases, Painted Grey Cast Iron, In Case - Metav IndustryLine
Take advantage of precise levelling (0.1 mm/m) in a compact frame and the robustness of painted grey cast iron to keep alignment checks reliable and reproducible on the shop floor; order directly via Metav Werkzeuge or get tailored advice from our consultants. Frame spirit level M215.151 — 150 mm, 0.1 mm/m (Metav IndustryLine) The Frame spirit level M215.151 is a compact frame-level instrument designed for accurate alignment and quick reference checks in machine shops and assembly jigs. 150 mm frame length 0.1 mm/m accuracy Prismatic feet for stable seating Painted grey cast iron construction Precise levelling that reduces rework and set-up time The M215.151 frame spirit level delivers a reading of 0.1 mm/m, making it suitable for tasks where consistent alignment across small assemblies is essential. The tight reading tolerance means fewer trial adjustments and less rework during machine set-up, which translates into measurable time savings on repetitive alignment tasks. The compact 150 mm frame offers convenient handling while maintaining a reference geometry that is stable enough for shop-floor inspections in mechanical and metalworking environments. Durable construction for everyday industrial use Built from painted grey cast iron, the frame is designed for dimensional stability and resistance to the knocks of daily workshop use. The cast structure dampens vibrations and preserves the instrument’s geometry under load, while the prismatic feet provide a secure seating on cylindrical or profiled surfaces, improving contact repeatability. The material choice balances longevity with a weight that supports practical handling and positioning without the need for continuous repositioning aids. Clear benefits for practical alignment tasks As a frame-style level, this instrument offers a rigid reference that is easy to compare against machine beds, fixtures and turned parts. The combination of compact format and stable seating supports faster visual checks and reduces the chance of misalignment during assembly. For operations that prioritise reproducibility—such as jig adjustment or quick quality checks—the level provides a straightforward, low-maintenance solution that complements digital measurement systems and manual gauges alike. Ask Metav Werkzeuge for application guidance or specification matching to see how the Metav IndustryLine frame spirit level M215.151 can improve alignment workflows in your facility; email info@metav-werkzeuge.com or call +49 2822 7131930 for direct consultation Technical data Article number: M215.151 GTIN: 4054469109831 ECLASS: 21160113 ETIM: EC000145 Numbers / Core technical data Reading: 0.1 mm/m Dimensions: 150 x 150 mm Customs tariff number: 90153090 Display/scale resolution: 0.1 mm/m Special features / Versions Material: painted grey cast iron Design: frame spirit level Seating: two prismatic feet Category: angle measuring devices (Winkelmessgeräte) FAQ What accuracy can be expected from this frame spirit level? The frame spirit level M215.151 provides an accuracy corresponding to a reading of 0.1 mm/m, suitable for routine alignment and reference checks in machine shops. Is the M215.151 suitable for use on round or profiled surfaces? Yes, the prismatic feet on the M215.151 allow stable seating on cylindrical or profiled elements, improving repeatability when checking shafts or pipes. What material is the frame made from and why is that important? The frame is made from painted grey cast iron; this material offers dimensional stability and vibration damping, which helps maintain reliable reference geometry during everyday use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Frame Spirit Level, 0.3 mm/m Accuracy, Prismatic Bases, Painted Grey Cast Iron, Kitted Case - Metav IndustryLine
Take advantage of a compact, workshop-ready instrument that combines 150 mm span, 0.3 mm/m accuracy and a special cast-iron frame for dependable levelling and alignment work; order the frame spirit level directly via Metav Werkzeuge or consult our technical team for application advice. M215.171 Frame spirit level — 150 mm, 0.3 mm/m accuracy (Metav IndustryLine) The M215.171 frame spirit level is a precision alignment tool designed for machine-bed levelling and angular control in workshop and inspection environments High accuracy 0.3 mm/m Special cast-iron construction Two prismatic support faces Painted finish for corrosion protection Maintain production accuracy with consistent levelling results The instrument delivers a reliable 0.3 mm/m sensitivity that supports repeatable alignment routines on machine beds, fixtures and reference surfaces. The robust special cast iron frame provides intrinsic stability and thermal mass, reducing susceptibility to short-term temperature fluctuations; as a result, measurement scatter is lowered and setup times are shortened. For routine quality checks, this combination of sensitivity and mass helps maintain process tolerances without frequent adjustments. Built for workshop use and easy handling A compact frame format with prismatic support faces simplifies positioning on round or angled surfaces and keeps the vials aligned during setup. The painted finish protects the housing from workshop contaminants while the design facilitates clear viewing of both longitudinal and cross vials, enabling fast determination of tilt in two axes. The instrument’s dimensions (150 x 150 mm) make it suitable for confined spaces where a full-length level would be impractical, yet it retains the stiffness required for repeatable readings. Clear readings and practical measurement workflow The two spirit vials—arranged longitudinally and transversely—allow direct observation of both pitch and roll without repositioning the tool. The prismatic base ensures firm seating on edges or shafts, improving contact stability and reducing measurement artefacts. As a dedicated angle and levelling instrument, it supports efficient set-up procedures in toolmaking, machine assembly and maintenance tasks where quick, verifiable alignment is required. Documentation and traceability for production environments Identifying features such as the manufacturer SKU and GTIN are provided for inventory and traceability purposes, and the instrument’s construction follows established metrology conventions for workshop levelling devices. The compact design translates to straightforward storage and handling within a tooling cabinet or inspection bench, while the robust material choice reduces the need for frequent replacement, supporting long-term operational reliability. Contact Metav Werkzeuge to discuss how the Metav IndustryLine M215.171 frame spirit level can support precise levelling and alignment in production — call +49 2822 7131930 or email info@metav-werkzeuge.com for specification guidance and order processing Technical Data Article number: M215.171 GTIN: 4054469109909 eClass: 21160113 ETIM: EC000145 Facts Dimension: 150 x 150 mm Sensitivity / reading: 0.3 mm/m Special features Material: grey cast iron, painted Two prism support faces Longitudinal and cross spirit vials Category: angle measuring device FAQ What is the accuracy of this frame spirit level? The M215.171 frame spirit level has a sensitivity of 0.3 mm/m, specified for levelling and alignment tasks in workshop environments. Which materials is the M215.171 suitable for when used as a reference level? The instrument serves as a mechanical reference for machine beds, fixtures and metallic components where a rigid, stable frame is required; its cast-iron construction enhances stability for such applications. How do the prismatic support faces benefit measurement tasks? Prismatic support faces provide reliable seating on cylindrical or angled edges, reducing slippage and improving repeatability when taking longitudinal and transverse readings. Is this frame spirit level suited for confined working spaces? Yes; with a compact 150 x 150 mm footprint the instrument is designed for situations where a full-length level cannot be used, while still offering workshop-grade stiffness. Can the M215.171 be used for routine machine-bed levelling? The M215.171 is intended for machine-bed levelling and quick alignment checks, offering a practical blend of accuracy and robustness for regular maintenance and setup tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Precision Spirit Level Prismatic Base Longitudinal And Cross Vials, Adjustable, Cast Iron, Supplied In Case - Metav IndustryLine
Benefit from robust grey cast iron construction combined with easy adjustment and a precise reading of 0.02, ensuring repeatable alignment results for workshop and machine-room tasks. Order the M215.121 directly via Metav Werkzeuge or consult our specialists for application-specific advice. M215.121 Precision spirit level — grey cast iron, easily adjustable The M215.121 precision spirit level is a compact angle-measurement instrument designed for workshop alignment and machine set-up, combining stable construction with fine adjustment. Easily adjustable calibration Grey cast iron body for stability Supplied in protective transport case Stable foundation for repeatable alignment A heavy grey cast iron body provides thermal mass and rigidity, which reduces the risk of flexing during measurement and contributes to repeatable, comparable results across repeated checks. The compact 150 mm length keeps the instrument manoeuvrable while offering sufficient contact area for most bench and machine alignment jobs. In practice, the robust construction minimises disturbance from incidental knocks or temperature fluctuations, so setups and verifications remain reliable over time and across different workstations. Fine adjustment and clear indication for precise tasks Equipped with an easily adjustable mechanism and a reading of 0.02, the instrument supports fine levelling and alignment tasks where small deviations matter. The adjustment facility allows the vial to be set quickly after installation or after transportation, reducing downtime. The specified reading value indicates a fine graduation suited to precision alignment work in toolrooms and maintenance operations, making the level appropriate for both initial machine set-up and final verification steps. Practical design for workshop handling and transport Delivered in a protective transport case, the instrument is ready for secure storage and safe transfer between sites. The compact format and rugged material make it suitable for routine checks in assembly, fixture adjustment and quality-control benches. Marked as SKU M215.121 and classified within angle-measuring instruments, the tool integrates into a metrology kit where durability and consistent performance are priorities. For operators who value straightforward handling and low-maintenance calibration, this level streamlines alignment workflows. For precise alignment tasks choose the Metav IndustryLine M215.121 — contact Metav Werkzeuge in Emmerich for purchase or tailored technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M215.121 GTIN: 4054469146256 Eclass: 21160113 ETIM: EC000145 Core specifications Length: 150 mm Reading: 0.02 Tariff number: 90153090 Special features Material: Grey cast iron Easily adjustable calibration Supplied in protective transport case Category: Angle measuring instruments FAQ What level of precision does this instrument offer? The M215.121 precision spirit level delivers a reading of 0.02, providing fine indication suitable for workshop alignment and accurate machine levelling. Is the level ready for use out of the box? The instrument is supplied in a protective transport case and features an easily adjustable calibration; further adjustments can be made on site before first use. Which materials and applications suit this level? Constructed from grey cast iron, the level is intended for machine-room alignment, fixture setup and routine angular checks where stability and repeatability are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Rail For Universal Angle Gauge, 16x2.5 Cross Section - Metav IndustryLine
Take advantage of a compact mounting profile that combines 150 mm length, a 16×2.5 cross‑section and exceptionally low weight for stable, repeatable angle measurement; order directly via Metav Werkzeuge or ask our consultants for integration advice. 150 mm rail for TOP universal angle measuring instrument — 16×2.5 cross‑section, Metav IndustryLine The 150 mm rail for TOP universal angle measuring instrument is a compact mounting profile designed to deliver a rigid reference for precision angle measurements in workshop and laboratory metrology. Compact 150 mm precision profile Robust 16×2.5 cross‑section Lightweight 0.1 kg mounting rail Metav IndustryLine manufacturing quality Stable reference for repeatable angle measurement The short, stiff profile creates a dependable datum for measuring angles with high repeatability. With a 150 mm nominal length and a 16×2.5 cross‑section, the profile limits bending and torsion that otherwise introduce measurement scatter; this is particularly beneficial where consistent alignment is required across multiple setups. The geometry serves as a fixed mounting surface for the TOP universal angle device, turning a measuring head into a reproducible inspection station and helping to keep process tolerances tight. Easy retrofit and predictable handling in the workshop The rail’s compact dimensions and low weight (around 0.1 kg) simplify installation and handling on measurement benches, fixtures or portable test rigs. The cross‑section specification denotes the profile width and wall thickness, which together determine stiffness and mounting clearance; these parameters make the component straightforward to fit where space is limited. Delivered without additional packaging, the part is intended for direct assembly into existing systems or for integration into jigs where immediate use is required. Industrial reliability and traceable identification Produced under the Metav IndustryLine label, the rail reflects consistent production standards for workshop metrology parts. Clear identification with GTIN and SKU supports inventory control and traceability in procurement processes, while the compact construction reduces storage footprint and simplifies logistic handling. Where a rigid, short reference is needed for repetitive angle checks, this mounting profile offers a pragmatic combination of stiffness and portability that supports efficient inspection routines. For matching parts, technical advice or to procure the Metav IndustryLine 150 mm rail, contact Metav Werkzeuge in Emmerich — our specialists will recommend the correct mounting solution and supply options. Technical data SKU: M214.098.1 GTIN: 4061905053641 Description: 150 mm rail for TOP universal angle measuring instrument (without packaging) Brand: Metav IndustryLine Facts Length: 150 mm Cross‑section: 16×2.5 mm Weight: 0.1 kg Special features No packaging (delivered unpacked) Compatible with TOP universal angle measuring instruments Compact, stiff profile for repeatable setups FAQ What is the intended use of this rail? The rail serves as a compact mounting and reference profile for angle measurement systems; it is designed to accept the TOP universal angle measuring instrument and to provide a stable datum for repeatable measurements. Is the rail supplied ready for installation? Yes, the Metav IndustryLine 150 mm rail is delivered without packaging and is intended for immediate integration into fixtures or measurement benches. What do the dimensions 16×2.5 indicate? The specification denotes the profile’s width and wall thickness (in millimetres); it is a key factor in the rail’s stiffness and suitability for supporting an angle measuring head. Can this rail be used in a portable inspection setup? Its compact length and 0.1 kg weight make the profile suitable for portable or bench‑mounted inspection rigs where a rigid, short reference is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Spirit Level With Prismatic Base 0.1 Mm/M, Cast Iron, Wooden Case - Metav IndustryLine
Combining precise 0.1 mm/m sensitivity, a 150 mm measuring length and a prismatic base delivers reliable alignment checks for workshop and machining tasks; order the item directly via Metav Werkzeuge or contact our consultants for tailored advice on application and suitability. M215.141 precision spirit level — 150 mm, 0.1 mm/m (Metav IndustryLine) The M215.141 precision spirit level is a compact alignment instrument for machine shops and general metalworking, offering a 150 mm span and 0.1 mm/m sensitivity for straightforward levelling and angle checks across flat and curved components. 150 mm measuring length 0.1 mm/m sensitivity Prismatic base for secure placement Grey cast iron construction Consistent alignment where it matters This spirit level delivers an immediate, measurable outcome thanks to its 0.1 mm/m reading, which is particularly suitable for alignment and setup work rather than ultra‑fine laboratory measurement. Classified in the Standard class (measurement range around 150 mm), it balances reach and stiffness to provide reproducible results across everyday workshop tasks. The scale of sensitivity means rapid verification of tables, fixtures and machine beds while keeping procedures efficient and predictable. Secure contact on flat and curved surfaces The prismatic base gives this instrument a real advantage when working with cylindrical stock or shafts: the groove-like seating stabilises the level on rounded surfaces and prevents lateral slip during measurement. Coupled with the instrument’s flat bearing areas, this design reduces repositioning errors and shortens setup time, helping to maintain process flow when checking alignment on spindles, rollers or pipe sections. Robust build for shop‑floor use Constructed from grey cast iron with a specially cast body, the unit resists the minor knocks and temperature changes of an active workshop while preserving vial alignment. The material choice increases damping of vibration and contributes to dimensional stability, which in turn supports repeatable readings throughout a working day. This robust approach reduces the need for frequent recalibration in stable conditions, supporting continuous use in production environments. Practical integration and trust in supply As an angle‑measuring instrument it fits naturally into standard inspection routines and setup procedures; the compact 150 mm span makes it easy to store and manoeuvre while remaining effective for a wide range of applications. Metav’s position as a precision partner and broad product range further supports procurement and spare‑part planning, making this tool a pragmatic choice for workshops that require dependable measuring aids without unnecessary complexity. Contact Metav Werkzeuge in Emmerich for detailed suitability advice or to arrange purchase of the M215.141 precision spirit level; our specialists will advise on workshop application and delivery options. Technical data Article number: M215.141 GTIN: 4054469109800 ECLASS: 21160113 ETIM: EC000145 Customs tariff number: 90153090 Core figures Measuring length: 150 mm Readability: 0.1 mm/m Category: Angle measuring instrument Materials & features Material: Grey cast iron Construction: Special cast body Base: Prismatic surface for curved components Application: Workshop alignment and angle checks FAQ What level of precision does this spirit level provide? The M215.141 precision spirit level offers a readability of 0.1 mm/m, making it suitable for alignment and setup tasks in machine shops where reproducible, practical accuracy is required. Can the prismatic base be used on round shafts and pipes? Yes, the prismatic base is designed to seat securely on cylindrical surfaces, improving stability when checking alignment on shafts, rollers or pipes. Is this spirit level suitable for heavy industrial use? Built from grey cast iron with a specially cast body, the instrument is intended for shop‑floor conditions and offers robustness for routine production checks. Which applications are most appropriate for this 150 mm level? The 150 mm span is ideal for general machine‑tool setup, fixture alignment and verification of small to medium assemblies where a balance of reach and rigidity is required. How does this spirit level fit into a workshop toolset? As a compact angle measuring instrument, the M215.141 complements gauges and dial indicators for machine setup and offers quick, visual confirmation of level and alignment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Universal Angle Gauge With Dial Indicator, Fine Adjustment, 360° Scale, Three-Point Mounted, Supplied In Case - Metav IndustryLine
Take advantage of precise angular control and clear analogue readout combined with a compact, stiff rail for reliable setup and repeatable inspection results; order directly via Metav Werkzeuge or contact the consultants for application advice. Uni angle measuring instrument with dial, 360° × 150 mm rail with fine adjustment — Metav IndustryLine Uni angle measuring instrument with dial for precise workshop alignment and inspection across a full circular range on a 150 mm rail, equipped with a fine-adjustment mechanism and integrated dial gauge for clear, repeatable readings Integrated dial gauge for rapid readings Fine-adjustment for sub-degree alignment 360° measurement on a 150 mm rail Robust 16×2.5 mm profile, 0.6 kg weight Accurate, repeatable angular measurement for inspection tasks This analogue angle gauge delivers a combination of straightforward operation and technical reliability for workshop and quality-control environments. The included dial gauge gives an immediate visual reference, while the fine adjustment allows controlled micro-movements during alignment. With a reading increment of 1/12° and a declared accuracy of 10 arcminutes, the instrument is suited to machining set-ups and inspection benches where fast, reproducible angular positioning reduces rework and speeds throughput. The robust profile supports stable clamping and helps maintain alignment under normal handling. Compact design that fits into everyday workflows The compact 150 mm rail and a slim 16×2.5 mm cross-section keep the assembly light at 0.6 kg, making it easy to handle on jigs, fixtures or surface plates without compromising stiffness. The low mass aids rapid repositioning, while the stiff profile minimises flex during fine adjustments, contributing to consistent results across repeated measurements. The analogue mechanism is service-friendly and avoids the need for batteries, which simplifies readiness in busy production areas. Clear operation and durable transport protection The instrument is designed for immediate use: the integrated dial removes guesswork when setting or checking angles, and the fine-adjustment gives controlled input for small corrections. For safe storage and transit the device is supplied in a protective case, which keeps the mechanism and scale free from damage and contamination during transport. This combination of visible readout, controlled adjustment and secure transport makes the gauge well suited to both shop-floor tasks and occasional calibration checks. Request tailored advice or a quotation from Metav Werkzeuge for the Metav IndustryLine model M214.081.T — our specialists will confirm suitability and delivery options for your application Technical Data Article number: M214.081.T GTIN: 4054469106472 Manufacturer: Metav IndustryLine Category: Angle measuring instruments Facts Rail length: 150 mm Cross-section: 16 × 2.5 mm Reading: 1/12° Accuracy: 10 arcminutes Weight: 0.6 kg Special features Analogue dial gauge included Fine-adjustment mechanism 360° measurement capability Supplied in protective case Stiff profile for repeatable alignment FAQ What kind of readout does the instrument use? The unit uses an analogue dial gauge readout, providing immediate visual readings suitable for rapid alignment and inspection. Is the fine-adjustment suitable for small angle corrections? Yes, the fine-adjustment mechanism enables controlled micro-movements for precise sub-degree alignment, ideal for setup tasks. Which applications are ideal for this angle gauge? This instrument is well suited to workshop alignment, fixture set-up and incoming inspection where visual, repeatable angular checks are required. Does the device require batteries or electronic maintenance? The gauge is analogue and does not require batteries, reducing maintenance and ensuring readiness in production environments. What does the protective case provide? The supplied protective case safeguards the dial mechanism and rail during transport and storage, maintaining accuracy and surface condition. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
158mm Digital Inclinometer With Audible Zero Alert, Backlight, IP65 - Metav IndustryLine
Conflicting product data detected: the supplied attributes for this item contain inconsistent length and weight values that prevent a reliable product description. The descriptive label specifies "158 mm" and "0.39 kg", whereas the explicit numeric fields give length as 152 mm and weight as 0.20 kg. These discrepancies affect essential technical details (physical dimensions and mass) that are critical for correct classification, selection and documentation. Please provide corrected and consistent data for length and weight, or confirm which fields are authoritative so a complete, accurate product text can be produced. Once the contradictions are resolved, a full product description aligned with the requested structure and technical standards will be delivered.
180° 200 x 300 mm Protractor, Matt Chrome Finish With Locking Screw - Metav IndustryLine
Taking advantage of a durable, matt chrome‑plated steel body and a clear 0–180° scale with 1° graduations ensures reliable angle measurement in routine inspection and workshop tasks; the integrated locking screw secures readings for repeatable results. For procurement or technical clarification, order the tool directly from Metav Werkzeuge or consult the Metav specialists for guidance. Protractor M214.153 — 0–180° angle gauge, 200 × 300 mm, locking screw (Metav IndustryLine) The Protractor M214.153 is a 0–180° angle gauge designed for workshop inspection and layout work, combining a matt chrome finish with a secure locking screw for stable measurements. 0–180° scale in 1° increments 200 × 300 mm measuring plate Fully matt chrome‑plated steel construction Integrated locking screw for stable readings Robust construction for consistent measurement results The matt chrome‑plated steel construction delivers mechanical stability and a corrosion‑resistant surface that reduces glare under workshop lighting, supporting dependable measurements over time. A clear 0–180° scale, read in 1° steps, allows quick visual assessment of angles without additional calculation, while the substantial plate size of 200 × 300 mm offers a broad reference area for both small fixtures and larger layouts. This combination of materials and dimensions translates directly into fewer re‑measurements and a smoother inspection workflow. Secure locking and handling for repeatable readings An integrated locking screw fixes the scale in place once the required angle has been set, preventing slippage during transfer or marking operations. The semi‑circular geometry (diameter 186 mm) and a robust cross‑section (16 × 2.5 mm) provide torsional stiffness that helps maintain alignment during use. By securing the moving element, the locking mechanism improves repeatable measurements, which is especially valuable when producing several identical parts or when documenting as‑found and as‑left conditions on shop drawings. Practical design that fits workshop routines The large measuring plate and matt chrome finish simplify positioning and reduce reflections when inspecting components on a bench or beneath brighter lights. The protractor’s build supports rapid angle checks and layout tasks while its straightforward scale avoids unnecessary complexity—making it well suited for quality control, toolroom layout and assembly preparation. Delivered as a hand‑operated mechanical gauge, the instrument requires no power source and integrates easily into established metrology routines. For reliable angle measurement with Metav IndustryLine quality, request the Protractor directly from Metav Werkzeuge or contact our specialists at +49 2822 7131930 or info@metav-werkzeuge.com for tailored advice Technical data Article number: M214.153 GTIN: 4054469106878 ECLASS: 21170304 Customs tariff number: 90178090 Brand: Metav IndustryLine Facts Measuring range: 0–180° Reading in degrees: 1° Plate dimensions: 200 × 300 mm Diameter: 186 mm Cross‑section: 16 × 2.5 mm Special features Steel, fully matt chrome‑plated Locking screw for fixed readings Includes product images for reference FAQ What is the smallest angle increment readable on this protractor? The scale is graduated in 1° increments, so the Protractor M214.153 allows readings to the nearest degree. Is the protractor suitable for workshop use under bright lighting? Yes, the matt chrome‑plated steel finish on this Metav IndustryLine gauge reduces reflection and aids clear visual readings in typical workshop lighting. How is the reading secured during marking or transfer? An integrated locking screw fixes the movable scale, preventing slippage and ensuring repeatable measurements. Can the protractor be used for both inspection and layout tasks? The large 200 × 300 mm plate and robust construction make this angle gauge appropriate for inspection, layout and shop‑floor marking operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Angle Gauge 120 x 150mm Black Anodised Aluminium, 1° Graduation, Locking Screw - Metav IndustryLine
Take advantage of a compact, corrosion‑resistant angle gauge that combines robust anodised aluminium, clear 1° graduations and a secure locking screw for dependable set‑ups. Order directly via Metav Werkzeuge or request application guidance from our consultants for fast delivery and expert advice. Angle gauge AL — Angle measuring instrument, 0–180°, compact 120 × 150 mm Angle gauge AL is a compact, workshop‑grade angle measuring instrument for layout, machine set‑up and inspection tasks across metalworking and general engineering. 0–180° clear 1° graduations Black anodised aluminium construction Compact 120 × 150 mm footprint Adjustable locking screw for secure setting Fast, reliable angle setting for workshop routines The instrument provides a straightforward 0–180° scale with 1° graduations, enabling quick orientation and repeatable angle transfers during machine set‑up or layout work. The clear scale and the pivot mechanism allow efficient coarse to medium‑fine positioning, reducing time spent on iterative adjustments. As a practical angle instrument, it suits tasks where reproducible alignment and speed matter more than sub‑degree laboratory accuracy. Built for durability while staying lightweight Constructed from an aluminium alloy with a black anodised finish, this protractor achieves a balance between durability and low mass. The surface coating improves resistance to wear and corrosion in workshop environments, while the reduced weight—approximately 0.1 kg—keeps handling easy and reduces operator fatigue during repetitive use. The slim 12 × 3 mm cross‑section maintains sufficient stiffness for routine layout duties without adding unnecessary bulk. Practical dimensions that suit machine shops and toolrooms With a 120 × 150 mm faceplate and a pivot diameter of 110 mm, the gauge provides a useful working envelope for common components and fixtures. The size is optimised for one‑person handling, offering better reach than pocket protractors while remaining far more manageable than heavy long‑arm instruments. The included locking screw secures the chosen angle, so settings remain stable during marking or transfer operations. Clear specification and workshop integration The steel pivot and engraved graduations ensure legible readings under workshop lighting. The device’s modest footprint and corrosion protection make it straightforward to store alongside other metrology tools or to include in a portable inspection kit. For procurement and inventory purposes the item is identified by SKU M214.151.AL and GTIN 4054469164502, enabling straightforward ordering and stock management. Contact Metav Werkzeuge today for application advice or to arrange supply of the Angle gauge AL through Metav IndustryLine; our specialists in Emmerich will advise on suitability and delivery options Technical Data Article number: M214.151.AL GTIN: 4054469164502 Customs tariff number: 90178090 eClass: 21170304 Facts Measuring range: 0–180° Reading graduation: 1° Dimensions: 120 × 150 mm Pivot diameter: 110 mm Weight: 0.1 kg Special features Material: aluminium alloy, black anodised Cross‑section: 12 × 3 mm Locking screw included Category: angle measuring device FAQ What is the measuring range and resolution of this protractor? The Angle gauge AL has a measuring range of 0–180° with 1° graduations, suitable for general workshop layout and machine set‑up. Is the instrument suitable for regular shop use and transport? Yes, the aluminium construction with a black anodised surface provides corrosion resistance and a low weight of about 0.1 kg, making it suitable for routine shop use and inclusion in portable inspection kits. Can the chosen angle be fixed during marking or transfer? The device includes an adjustable locking screw that secures the set angle, ensuring stability during marking, machining set‑up or transfer operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Angle Gauge 150 x 200mm Black Anodised Aluminium, 1° Graduation, Locking Screw - Metav IndustryLine
Take advantage of the sturdy aluminium construction and the wide 0–180° measurement range to speed up angle inspection while maintaining repeatable results; ideal for workshop inspection and assembly tasks — order directly via Metav Werkzeuge or contact our consultants for application advice. Angle Protractor AL – aluminium, black anodised, 0–180°, 150 x 200 mm The Angle Protractor AL is a compact, workshop‑grade angle gauge for precise layout, inspection and assembly work across metalworking and fabrication environments. 0–180° measurement range 150 x 200 mm aluminium scale Black anodised corrosion resistance Practical locking screw for fixed readings Robust construction for everyday metrology The device combines a rigid aluminium alloy body with a black anodised finish to resist corrosion and reduce glare under workshop lighting. The flat 150 x 200 mm scale provides a stable reference while the overall unit remains exceptionally lightweight at 0.1 kg, making it quick to position and easy to handle across repeated checks. This balance of stability and portability supports efficient workflows without sacrificing mechanical durability. Clear, repeatable angle readings for faster throughput Featuring a full 0–180° range with a visible graduation of 1°, the instrument delivers straightforward, repeatable measurements for set‑ups and inspections. The integrated locking screw secures the arm in place after adjustment, reducing rework caused by inadvertent movement. For production environments where cycle time matters, the combination of clear graduations and a secure clamp shortens measurement time and reduces throughput variability. Practical design that integrates into workshop routines The flat profile and defined 16 x 3 mm cross‑section ensure that the gauge sits flush against most workpieces, while the 140 mm diameter pivot area provides a robust bearing point for frequent use. Markings are designed for quick visual checks and the matte anodised surface minimises reflective distractions. As a simple mechanical solution, the gauge requires no power and integrates seamlessly into handheld inspection stations and tool trolleys. Suitable for inspection, layout and assembly tasks Engineers and skilled tradespeople benefit from a tool that reliably transfers angles between drawings and parts. The protractor is particularly useful for checking joint angles, setting fixtures, and verifying machined features where a full digital protractor would be unnecessary. Its straightforward operation helps standardise inspection steps and speeds up first‑piece checks and routine in‑process verifications. Built for workshop reliability and cost-effective use Maintenance is minimal: the anodised surface and solid aluminium body reduce wear from handling and routine cleaning. The simple mechanical design also lowers the risk of downtime compared with powered devices. For buyers seeking a pragmatic instrument that emphasises dependability and ease of use, this gauge presents a low‑complexity solution that supports consistent quality control. Choose Metav IndustryLine precision: contact Metav Werkzeuge for purchasing advice and availability of the Angle Protractor AL (SKU M214.152.AL) at our Emmerich location Technical Data Article number: M214.152.AL GTIN: 4054469164519 Customs tariff number: 90178090 ECLASS: 21170304 Facts Measurement range: 0–180° Graduation: 1° Dimensions: 150 x 200 mm Cross-section: 16 x 3 mm Diameter: 140 mm Weight: 0.1 kg Special features Material: aluminium alloy, black anodised Locking screw for fixed readings Category: angle measuring device (protractor) Ideal for workshop layout, inspection and assembly FAQ What is the usable measurement range of this protractor? The Angle Protractor AL provides a measurement range of 0–180°, suitable for general layout and inspection tasks. Is the protractor finished to resist workshop wear? Yes, the unit is made from an aluminium alloy with a black anodised surface to improve corrosion resistance and reduce reflections during use. Does the instrument include a locking mechanism? A dedicated locking screw secures the arm for fixed readings, enabling repeatable checks and safe transport within the workplace. Which SKU should be ordered for this item? Order SKU M214.152.AL for the Angle Protractor AL from the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Angle Gauge 200 x 300mm Aluminium Black Anodised, 1° Graduation, Locking Screw - Metav IndustryLine
Take advantage of the robust black anodised aluminium construction and the clear 0–180° degree scale for fast, repeatable angle checks; the compact 200 × 300 mm plate with a fine locking screw combines handling ease with measurement reliability. Order the Angle Protractor AL directly via Metav Werkzeuge or ask our consultants if needed. Angle Protractor AL — Plate protractor, 0–180°, 200 × 300 mm (black anodised) The Angle Protractor AL is a plate-style angle gauge for workshop and inspection use, offering a full 0–180° measuring range on a compact 200 × 300 mm aluminium alloy body. Precision 0–180° scale Black anodised aluminium plate Fine locking screw for repeatable readings Compact 200 × 300 mm format Fast, reliable angle checks for everyday production The plate design provides a stable reference surface that supports quick alignment and inspection tasks. The 0–180° degree scale is clearly graduated for immediate interpretation, while the black anodised finish reduces glare and protects the surface from wear, increasing lifetime performance. With a low mass of 0.1 kg, the unit remains easy to manoeuvre during repetitive checks, helping to speed up set‑ups and reduce machine downtime. The compact profile with a 19 × 9 mm cross‑section keeps the component stiff enough for accurate positioning without adding unnecessary bulk. Repeatable readings through secure fixation and robust geometry A dedicated locking screw secures the angular setting and maintains the chosen position for transfer or comparison measurements, which supports reproducible results in jig and tool alignment. The flat plate geometry and defined diameter detail allow straightforward seating against reference faces and fixtures; operators and quality staff benefit from fewer measurement iterations and lower scrap rates. The combination of a tactile locking mechanism and a clearly marked degree scale turns subjective adjustments into traceable actions that fit routine quality procedures. Practical workshop integration and application focus Designed as a pragmatic measuring aid, the protractor suits bench inspection, machine alignment and rapid angle verification in metalworking and general fabrication. Its aluminium alloy construction keeps the instrument corrosion‑resistant while remaining light for frequent handling. The device integrates well into workshop flows where compact, durable tools are required for quick pass/fail decisions or as a trusty shop‑floor reference. For procurement, the Metav IndustryLine range emphasises dependable manufacturing and logistical support from Emmerich, ensuring steady supply to production lines. Choose the Metav IndustryLine Angle Protractor AL for resilient workshop performance and contact Metav Werkzeuge for tailored advice and prompt dispatch from Emmerich Technical Data Article number: M214.153.AL GTIN: 4054469164526 Tariff number: 90178090 Facts Measuring range: 0–180° Dimensions: 200 × 300 mm Weight: 0.1 kg Cross-section: 19 × 9 mm Diameter: 186 mm Special features Material: Aluminium alloy, black anodised finish Locking screw for repeatable angular fixation Scale reading in degrees Category: Angle measuring device (Winkelmessgeräte) eClass: 21170304 FAQ What measuring range does the protractor cover? The Angle Protractor AL provides a full 0–180° measuring range suitable for most workshop and inspection tasks. Which material and finish are used for the plate? The instrument is made from an aluminium alloy and finished with a black anodised surface for enhanced wear resistance. How is a setting secured once adjusted? A fine locking screw secures the angular position to ensure repeatable readings during transfer or inspection. Is the protractor suitable for daily shop‑floor use? Yes, the compact 200 × 300 mm plate and lightweight construction make the protractor well suited for regular workshop checks and alignment jobs. What identifiers should be used when ordering or referencing this item? Refer to article number M214.153.AL and GTIN 4054469164526 for precise ordering and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Angle Gauge 250 x 500 mm Matt Chrome Finish With Locking Screw - Metav IndustryLine
Robust matt-chrome finish and a clear 0–180° scale make precise angle setting straightforward; the sturdy cross-section and integrated locking screw secure repeatable readings. Order the protractor directly via Metav Werkzeuge or consult the technical team for specific application advice. Protractor M214.154 — 0–180° angle gauge, 250 × 500 mm (Metav IndustryLine) The Protractor M214.154 is a matt chrome-plated steel angle gauge designed for reliable angle setting and inspection in machine shops and layout work. 0–180° measurement range Matt chrome-plated steel construction 250 × 500 mm working dimension Integrated locking screw for stable readings Precision that speeds up inspection and layout The instrument offers a 0–180° measurement range on a clearly graduated scale with a reading increment of 1°, which is suitable for general workshop angle setting and quick inspection tasks. The scale is designed to be read easily under workshop lighting, reducing interpretation errors. Because the scale is graduated in single-degree steps, setup times are shortened and the number of rechecks is reduced, supporting a more efficient workflow in production and maintenance environments. Sturdy build for repeatable measurements Constructed from matt chrome-plated steel, this angle gauge benefits from a corrosion-resistant finish that maintains legibility and resists workshop wear. The cross-section 30 × 3.9 mm provides a balance between rigidity and manageable handling, keeping deflection low during measurement. An integrated locking screw secures the arm once the required angle is set, so readings remain stable during transfer or marking operations, reducing measurement uncertainty and improving repeatability. Practical applications and workshop advantages Designed for angle marking, assembly alignment and component inspection, this protractor is suited to metalworking, toolrooms and general mechanical workshops. The flat, elongated format with 250 × 500 mm working dimensions offers adequate reach for many fixtures and assemblies while remaining easy to store. Supplied under the Metav IndustryLine, the instrument complements standard workshop toolsets by delivering a pragmatic combination of durability and readable accuracy that supports everyday production tasks. For tailored advice on the Protractor M214.154 or to arrange delivery from Metav Werkzeuge, please contact the Metav team in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications Technical Data SKU: M214.154 GTIN: 4054469106885 Category: Angle measuring instruments Facts Working dimensions: 250 × 500 mm Measurement range: 0–180° Reading graduation: 1° Cross-section: 30 × 3.9 mm Diameter: 230 mm ECLASS: 21170304 TARIC / Customs code: 90178090 Special features Material: matt chrome-plated steel Locking screw for secure angle fixation Finish: matt chrome-plated surface Brand: Metav IndustryLine FAQ What measurement range does the protractor cover? The protractor covers a 0–180° range, which makes the Protractor M214.154 (Metav IndustryLine) suitable for standard angle setting and inspection tasks in workshops. How precise is the graduation on this angle gauge? The instrument is graduated in 1° steps; this resolution allows clear, repeatable readings for layout work and general inspection without the need for micrometric instruments. Is the construction suitable for heavy workshop use? Yes. The Protractor M214.154 features matt chrome-plated steel construction and a robust cross-section, designed to withstand normal workshop handling while keeping the scale legible. Does the tool include a locking mechanism? A locking screw is integrated, enabling stable fixation of the set angle and preventing movement during marking or transfer operations. Which workshop tasks suit this angle gauge best? Typical uses include angle marking, alignment of fixtures, inspection of machined parts and layout tasks in metalworking and assembly environments; the gauge is designed for practical, everyday shop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Angle Gauge 80 x 120 mm Matt Chrome Finish With Locking Screw - Metav IndustryLine
Combine precise 0–180° readings and a robust matt chrome-plated steel finish for dependable angle checks; the compact format and a secure locking screw ensure repeatable settings. Order the M214.150 bevel protractor directly via Metav Werkzeuge or ask our consultants if needed. M214.150 bevel protractor – 0–180°, matt chrome-plated steel (Metav IndustryLine) M214.150 is a compact bevel protractor designed for accurate angle layout and inspection across workshops and inspection benches, ideal where a clear 0–180° range and robust handling are required. 0–180° scale with 1° graduation Matt chrome-plated steel construction Locking screw for repeatable settings Compact 80×120 mm working format Precise angle measurement reduces rework and uncertainty The M214.150 delivers a clear 0–180° scale with a 1° graduation, enabling fast, objective readings during setup and inspection. The straightforward scale reduces interpretation errors and speeds decision-making on the shop floor, which translates into fewer adjustments and lower rework rates. The instrument is tailored to routine angle checks in metalworking and general assembly where a reliable single-degree resolution is sufficient for production and QA tasks. Durable construction for daily industrial use Made from steel, completely matt chrome-plated, the tool resists glare and offers a hard-wearing surface that stands up to regular handling. The 12×2.2 mm cross-section gives the blade stiffness for stable measurements, while the central rotating disc with a 74 mm diameter ensures smooth movement and clear alignment. This combination of materials and geometry yields a tool that retains accuracy under typical workshop conditions and supports reproducible results over time. Compact layout and secure locking speed up workflows The compact 80×120 mm format is easier to handle than larger protractors and fits comfortably at the bench or in a tool drawer. A dedicated locking screw permits the angle to be fixed reliably, making it simple to transfer settings or repeat cuts without constant re-adjustment. Clear graduations and a tactile clamping mechanism make this an efficient instrument for layout, fitting and routine inspection where quick, repeatable angle setting is a priority. Choose the Metav IndustryLine bevel protractor for dependable 0–180° checks — contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply Technical data Article number: M214.150 GTIN: 4054469106847 eClass: 21170304 Facts Measurement range: 0–180° Graduation: 1° Dimensions: 80 × 120 mm Cross-section: 12 × 2.2 mm Pivot diameter: 74 mm Tariff number: 90178090 Special features Material: steel, completely matt chrome-plated Locking screw for repeatable settings Compact bevel protractor format Category: Angle measuring instruments (Winkelmessgeräte) FAQ What resolution does the protractor offer? The M214.150 provides a 1° graduation on its 0–180° scale, suitable for standard workshop and inspection tasks. Can this tool be used for repeatable settings? Yes. The integrated locking screw secures the chosen angle so the setting can be transferred or reproduced reliably. What is the construction and finish of the instrument? The bevel protractor is made from steel with a matt chrome-plated finish, which reduces glare and improves durability in daily use. Is the format suitable for bench and portable use? The compact 80×120 mm format of the M214.150 is designed for ease of handling at the bench and convenient storage when mobility is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Angle Gauge 85x160 mm With mm Scale And Locking Screw - Metav IndustryLine
Take advantage of a compact, durable angle gauge that combines a 0–180° measuring range, a steel construction and an integrated mm scale on the beam for reliable positioning and quick visual checks; order the device via Metav Werkzeuge or contact our consultants for specification advice. M214.159 Protractor — 0–180°, Steel Angle Gauge with mm Scale (Metav IndustryLine) The M214.159 Protractor is a compact precision angle gauge designed for workshop inspection and setup tasks, covering 0–180° with an integrated millimetre scale and a locking device for repeatable angular stops. 0–180° measuring range Steel construction, 85 × 160 mm Integrated mm scale on the beam Locking screw for repeatable positioning Accurate angle control for routine inspection and setup The compact design provides a straightforward way to measure and transfer angles during machine setup, assembly and quality checks. The clearly engraved mm scale along the beam enables quick alignment with reference edges, while the 0–180° range covers the majority of practical angular tasks in metalworking and general manufacture. The steel construction ensures dimensional stability under typical workshop conditions and supports repeated use without rapid wear. This combination of features reduces handling time and contributes to consistent measurement routines, which is particularly valuable in production environments where speed and reproducibility matter. Reliable positioning and repeatability for downstream processes A dedicated locking device secures the spindle in the required position, enabling repeatable stops and precise transfer of set angles to components or jigs. The locking mechanism is designed for practical workshop use and helps avoid slippage during marking, clamping or assembly operations. The beam cross-section of 15 × 1.2 mm offers a balance between rigidity and manoeuvrability, making the instrument easy to hold and align while giving sufficient stiffness to keep readings stable. For workshops aiming to reduce rework and accelerate setup times, the instrument’s repeatability supports a measurable improvement in process efficiency. Built for everyday workshop resilience and ease of reading The protractor’s steel body tolerates the knocks and abrasions of a working environment better than lighter, less robust materials; the 85 × 160 mm footprint is compact enough for handheld use yet large enough to present clearly legible graduations. Visual contrast and the integrated millimetre markings speed up coarse and fine alignment tasks without the need for additional measuring tools. The low mass and slim profile make it suitable for on-machine checks and bench inspection alike, while the solid construction minimises the risk of deformation that can compromise angle accuracy over time. For dependable angle measurement with straightforward handling, request the M214.159 Protractor from Metav Werkzeuge or consult our Emmerich team for advice on integrating this gauge into existing inspection routines Technical data Article number: M214.159 GTIN: 4054469106922 ECLASS: 21170304 Customs tariff number: 90178090 Numerical data Dimensions: 85 × 160 mm Measuring range: 0–180° Cross-section: 15 × 1.2 mm Diameter: 84 mm Design & features Material: steel Beam with millimetre scale for alignment Locking screw for fixed positioning Compact footprint for handheld and bench use Category: Angle measuring instruments FAQ What measuring range does the protractor cover? The M214.159 protractor covers a 0–180° measuring range suitable for most workshop setups and inspection tasks. How is repeatability achieved when transferring angles? Repeatable positioning is enabled by the locking screw, which secures the spindle once the required angle is set. Is the instrument robust enough for everyday workshop use? The steel construction and compact geometry provide resilience against routine handling and support long-term dimensional stability. Can the integrated scale be used for linear alignment tasks? Yes, the millimetre graduations on the beam allow quick visual alignment and rough linear references in addition to angular measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Digital Angle Gauge 120 x 150 mm With Locking Screw, 0.05° Resolution - Metav IndustryLine
Take advantage of precise digital readout, robust steel construction and a locking mechanism for repeatable angle setups; order the device directly via Metav Werkzeuge or consult the technical team for application advice. M214.050 Digital Protractor – 0–180° range, 120 x 150 mm, locking screw The M214.050 is a compact digital angle gauge designed for setting, checking and transferring angles from 0–180° in machine shops and production fixtures. Digital display with ON/OFF, ZERO, HOLD/REV Wide 0–180° measuring range Steel stop and rail for robust stability Integrated locking screw for repeatable settings Accurate angle measurement that reduces setup time The digital display with a resolution of 0.05° delivers clear numerical readouts, eliminating ambiguity from analogue scales and speeding repeatability during setup. A precise numeric readout reduces cycle times when aligning fixtures or setting compound angles, because angle values can be set, zeroed and transferred without guesswork. The device supports quick reference functions—ZERO, HOLD/REV and ON/OFF—that simplify interim measurements and reversible reading for setups on mirrored parts. These features minimise rework and support consistent production quality across repeated tasks. Robust steel construction for dependable repeatability Stops and the measuring rail are made from steel, with a cross-section of 27.2 x 4 mm and material thickness of 4 mm, so the gauge resists flexing during normal workshop use. The integrated locking screw secures the blade once the required angle is set, which preserves the adjustment while components are transferred between machines or during inspection. At approximately 0.5 kg and with compact 120 x 150 mm dimensions the unit remains easy to handle yet stable enough for routine use on milling, drilling and assembly stations where reproducible angle clamping matters. Practical functions tailored to everyday workflows Designed for direct workshop application, the instrument combines a broad 0–180° range with simple controls that support straightforward operation under production conditions. The HOLD/REV function allows captured values to be frozen while the tool is moved, and reversed reading assists with mirrored or external angle checks. The compact format makes the gauge convenient for bench use and portable inspections, while the solid construction keeps readings reliable in standard manufacturing environments. If further clarification of measurement procedures is required, the technical specialists at Metav Werkzeuge provide application guidance and product specifications. Contact Metav Werkzeuge in Emmerich for tailored advice on the Metav IndustryLine M214.050 digital protractor or to request additional technical information at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.050 GTIN: 4054469168128 Category: Angle measuring instruments Brand: Metav IndustryLine Facts Measuring range: 0–180° Resolution: 0.05° Dimensions: 120 x 150 mm Cross-section: 27.2 x 4 mm Material thickness: 4 mm Weight: 0.5 kg Tariff number: 90178090 Special features Stop and rail made of steel Digital display with ON/OFF, ZERO, HOLD/REV Integrated locking screw for fixed settings Compact, portable format suitable for workshop use FAQ What measuring range does the instrument cover? The M214.050 covers a measuring range of 0–180°, suitable for general angle setting and checking in machining and assembly tasks. How fine is the displayed resolution? The digital readout provides a resolution of 0.05°, enabling precise adjustments and small-angle settings. Can the angle be fixed after adjustment? Yes, the unit includes an integrated locking screw that secures the set angle for transfer or repetitive work. Which display functions are available? The display includes ON/OFF, ZERO and HOLD/REV controls for zeroing, freezing values and reversing the reading direction when required. Is the gauge suitable for portable inspections? With compact dimensions of 120 x 150 mm and a weight of about 0.5 kg, the device is designed for easy handling during bench and portable checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Digital Angle Gauge 150 x 200 mm With Locking Screw, LCD Display - Metav IndustryLine
Benefit from precise angular measurement, robust steel construction and straightforward digital controls for repeatable set‑ups and quicker inspection cycles; order the protractor via Metav Werkzeuge or request technical advice from our consultants if required. M214.052 Digital protractor — 0–180° range, 150 x 200 mm (Metav IndustryLine) M214.052 Digital protractor for fast, repeatable angle measurement in workshop, inspection and layout applications Digital 0.05° resolution 0–180° measurement range Steel stop and rail construction Locking screw for reproducible set‑ups Accurate angle control that improves throughput The 0–180° measuring range combined with a fine 0.05° resolution delivers reliably repeatable readings for setup and inspection tasks. The electronic readout removes parallax error associated with analogue devices and shortens the time required to verify angles, which directly improves machine changeover and inspection throughput. Where traceable or repeat measurements are needed, the device offers stable, unambiguous values that support quality checks and statistical process control. Robust design for everyday workshop use A steel stop and rail with a 27.2 x 4 mm cross‑section and a 4 mm material thickness give the gauge mechanical stiffness for typical metalworking environments. The integrated locking screw secures the blade, enabling set‑ups to be transferred between machines without losing the reference. At approximately 1 kg, the unit is substantial enough to remain stable during adjustments yet portable enough for bench work and mobile inspection duties. This combination reduces the risk of distortion and lengthens service life under normal workshop handling. Intuitive digital functions that reduce errors The digital display provides a clear numerical readout and includes practical controls — ON/OFF, ZERO, HOLD/REV — that assist in common measuring routines. Zeroing at any blade position simplifies differential angle measurements; the hold function preserves transient readings for inconvenient viewing angles; reverse display mode supports measurements in opposite orientations. These functions minimise secondary calculations and human transcription errors, making the instrument well suited for fast-paced production and routine quality checks. Practical integration into machine shops and inspection benches With a compact face size of 150 x 200 mm, the protractor fits comfortably on layout tables, inside inspection jigs and on machine fixtures where space is limited. The clear digital readout and mechanical locking enable its use for setup of tooling angles, alignment of fixtures and quick verification of part geometry. The product’s classification and build make it an effective choice for maintenance teams, workshop inspectors and quality personnel who require a dependable, easy‑to‑use instrument for daily angle measurement tasks. For precision angle measurement and dependable workshop performance choose the Metav IndustryLine M214.052 — contact Metav Werkzeuge in Emmerich for specification help at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data SKU: M214.052 GTIN: 4054469168135 Eclass: 21170304 Country tariff code: 90178090 Facts Measuring range: 0–180° Face size: 150 x 200 mm Resolution: 0.05° Cross‑section: 27.2 x 4 mm Material thickness: 4 mm Weight: 1 kg Special features Digital display with ON/OFF, ZERO, HOLD/REV Locking screw for repeatable set‑ups Stop and rail made from steel Suitable for workshop and inspection use FAQ How precise is the reading on this protractor? The digital instrument provides a resolution of 0.05°, giving fine angular discrimination suitable for routine workshop alignment and inspection tasks. Can the measurement be locked to transfer a setting between machines? Yes — the device includes a locking screw to secure the blade, enabling reproducible transfer of angle settings. What environments is the gauge intended for? Constructed with a steel stop and rail and a robust cross‑section, the tool is designed for standard machine shop, maintenance and inspection environments. Which controls are available on the display unit? The electronic readout offers ON/OFF, ZERO, HOLD/REV buttons to zero at any blade position, capture transient readings and reverse the display orientation. Is the protractor suitable for fixture and tooling alignment? Its compact 150 x 200 mm face and robust construction make it well suited for fixture set‑up, tooling alignment and quick part verification in production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Digital Angle Gauge 200 x 300 mm With Locking, ON/OFF Zero Hold Display - Metav IndustryLine
Benefit from rapid, repeatable angle checks and a rigid steel construction that keeps set-ups stable; the digital display and locking screw ensure clear readings and secure positioning during inspection and machining. Order the Digital Angle Gauge M214.053 directly via Metav Werkzeuge or consult our specialists if required. Digital Angle Gauge M214.053 — Digital angle gauge, 0–180°, 200 × 300 mm, Metav IndustryLine The Digital Angle Gauge M214.053 is a workshop-grade instrument for precise angle measurement and alignment across assembly, inspection and machine set-up tasks. Digital display with ON/OFF, ZERO, HOLD/REV 0–180° measurement range for versatile use Steel stop and 200 × 300 mm rigid rail Faster, reliable angle set-up for production With a readable digital display and a measurement span of 0–180°, this gauge reduces the time needed for routine angle checks and machine set-ups. The display offers ON/OFF, ZERO and HOLD/REV functions that simplify temporary datum setting and reverse-counting for complex fixtures. A 0.05° reading step provides finer indication than typical analogue tools, enabling more confident alignment decisions and fewer iterative adjustments, which accelerates throughput and reduces rework. Secure positioning and robust construction for repeatable results The instrument combines a steel rail and hardened stop with a precise locking screw, so measured angles remain fixed during transfers and clamping operations. The rail’s cross-section (27.2 × 4 mm) and plate thickness (4 mm) deliver profile stiffness that limits deflection during handling. At approximately 1.1 kg, the unit stays portable for bench or shop‑floor use while offering the rigidity expected in daily inspection routines. The result is reproducible measurement behaviour across repeated cycles. Practical controls and ergonomic handling to reduce errors Integrated control keys and a clear readout minimise interpretation mistakes and support faster operator workflows. The HOLD/REV function allows retention of transient readings and simple reversal of measurement direction for awkward geometries, while the ZERO key lets operators set relative angles quickly. The compact 200 × 300 mm footprint fits most benches and jig stations, making the instrument a practical choice for layout work, jig verification and rapid on-machine checks without sacrificing clarity of information. Trusted supply and industrial compatibility Produced for industrial metrology contexts, the design suits inspection, fixture set-up and general mechanical workshops. Supplied under the Metav IndustryLine umbrella, the gauge benefits from a European distribution and quality‑assurance focus that supports dependable replenishment and product consistency. Metav’s long experience in precision tools underpins availability and product advice, helping maintain operational continuity in production environments. Contact Metav Werkzeuge for a specification review or to request a quotation for the Metav IndustryLine Digital Angle Gauge M214.053 — our specialists in Emmerich will advise on fit and delivery options Technical Data Article number: M214.053 GTIN: 4054469168142 ECLASS: 21170304 Tariff number: 90178090 Facts Measurement range: 0–180° Reading increment: 0,05° Rail dimensions: 200 × 300 mm Cross-section: 27,2 × 4 mm Material thickness: 4 mm Weight: 1.1 kg Special features Material: stop and rail made of steel Digital display with ON/OFF, ZERO and HOLD/REV keys Locking screw for fixed positioning Compact workshop footprint suitable for benches and jigs FAQ How precise is the instrument for angle readings? The gauge provides a reading increment of 0.05°, offering finer indication than coarse analogue scales and supporting accurate alignment tasks with minimal iterative correction. What measurement range does it cover? The device measures from 0° to 180°, suitable for most fixture, alignment and component inspection applications. Which materials form the main structural parts? The stop and rail are manufactured from steel, giving the gauge the stiffness required for repeatable measurements. Are there any convenience functions on the display? Yes; the display includes ON/OFF, ZERO and HOLD/REV functions to set relative datums, retain readings and reverse the counting direction as required. Is the instrument portable for shop use? At approximately 1.1 kg and with a 200 × 300 mm footprint, the unit is designed to be handled on benches and transferred between machines while maintaining rigidity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Digital Bevel Protractor 400 x 800 mm With Locking Screw, Digital Display ON/OFF ZERO HOLD/REV - Metav IndustryLine
Take advantage of a robust steel rail and stop, a 0–180° measuring range with 0.05° readability, and a secure locking screw for repeatable angle settings — all designed to speed up setup and reduce rework. Order the digital protractor M214.056 directly via Metav Werkzeuge or ask our consultants if needed. Digital Protractor M214.056 — 0–180° electronic angle gauge, 400 x 800 mm, Metav IndustryLine The Digital Protractor M214.056 is a workshop-grade electronic angle gauge for precise angle setting and inspection across a full 0–180° range, ideal for assembly, jigs and quality control applications. Digital readout with ON/OFF, ZERO, HOLD/REV Measuring range 0–180° for versatile angle checks Steel stop and rail for durable alignment Locking screw for repeatable positioning Reliable precision that shortens setup time The electronic indicator with 0.05° readability provides clear, objective angular data so machining set-up and inspection become measurable and reproducible. The integrated digital readout (ON/OFF, ZERO and HOLD/REV functions) simplifies comparative measurements and makes it straightforward to record or hold a reading without guesswork. This reduction in manual interpretation translates directly into fewer corrective cycles and more consistent output across production runs. Robust construction built for workshop environments A stop and guide rail manufactured from steel form the structural backbone, combined with a 27.2 x 4 mm cross-section and a 4 mm material thickness where noted; this provides the stiffness required for stable alignment over the whole 400 x 800 mm assembly. At around 4 kg the unit offers a stable feel that resists unwanted movement during adjustment, improving the repeatability of angle setting on fixtures and assemblies. Practical controls for efficient measurement routines The device includes a locking screw that fixes the selected angle, enabling transfer of the set value from gauge to workpiece or jig without drift. The HOLD/REV function supports inertia-free readings when transferring between positions, while the ZERO button allows easy relative measurements. These features reduce handling time and support a predictable measurement workflow within inspection and set-up tasks. Designed for everyday industrial use and traceable identification As part of the Metav IndustryLine range, the unit carries a clear SKU (M214.056) and GTIN for inventory and procurement processes. The combination of a digital indicator, solid rail geometry and a locking mechanism suits repeated shop-floor use where consistent angle setting and quick verification are priorities. The electronic functionality makes it suitable for small-batch production where frequent re‑adjustments are required. For precise angle setting in jigs and inspection, contact Metav Werkzeuge in Emmerich for tailored advice on the Metav IndustryLine digital protractor M214.056 and guidance on delivery and integration. Technical Data Article number: M214.056 GTIN: 4054469168166 ECLASS: 21170304 Tariff number: 90178090 Manufacturer: Metav IndustryLine Facts Measuring range: 0–180° Readability: 0.05° Dimensions: 400 x 800 mm Cross-section: 27.2 x 4 mm Material thickness: 4 mm Weight: 4 kg Special features Digital display with ON/OFF, ZERO and HOLD/REV Steel stop and rail Locking screw (feststellschraube) Category: Winkelmessgeräte FAQ What measurement range does the protractor cover? The digital protractor covers a 0–180° range suitable for full-angle checks and settings on fixtures and assemblies. How fine is the angle resolution on this gauge? The instrument offers a 0.05° readability, delivering clear, workshop-appropriate precision for alignment and inspection tasks. Is the unit suitable for repeated shop-floor use? Yes, the steel rail and stop combined with the locking screw ensure durable alignment and repeatable positioning for routine production work. What controls are available on the digital display? The display includes ON/OFF, ZERO and HOLD/REV functions to support relative measurements, stable readings and easy data transfer. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Protractor 120 x 150 mm Matt Chrome Finish With Locking Screw - Metav IndustryLine
Take advantage of precise angle layout combined with a matt chrome-plated steel construction and a secure locking screw for reproducible readings; the compact 120 x 150 mm format keeps the instrument easy to handle in confined assemblies. Arrange procurement or ask for application advice via Metav Werkzeuge. Bevel Protractor M214.151 — Metav IndustryLine, 0–180° with locking screw Bevel Protractor M214.151 is a workshop-ready angle gauge for layout and inspection tasks, designed to measure and transfer angles between 0° and 180° with readable 1° graduations. Matt chrome-plated steel finish 0–180° measuring range Locking screw for secure readings Compact 120 x 150 mm design Precision where angle accuracy matters The instrument provides a 0–180° measuring range with a clear 1° graduation, making it suitable for routine layout, inspection and assembly operations that require repeatable angular settings. The scale is easy to read and the included locking screw secures the blade once the desired angle is set, which reduces operator-induced variation and supports consistent results across repeated checks. Such measurable control is especially useful when transferring angles between components or when verifying set-ups on jigs and fixtures. Robust construction for daily workshop use Constructed from steel, matt chrome-plated, the bevel protractor resists reflections and offers a durable contact surface that stands up to workshop handling. The cross-section of 12 x 2.2 mm and the compact 120 x 150 mm dimensions balance stiffness with manoeuvrability: the profile provides sufficient rigidity for reliable readings while the size allows access to tighter assemblies. These design choices support a practical compromise between durability and ease of use in metalworking and general fabrication environments. Practical benefits for process reliability As a straightforward angle measuring tool, this gauge assists in reducing set-up time and measurement uncertainty during routine tasks. The combination of a defined measuring range, a tactile locking mechanism and a matt finish means fewer readjustments and clearer markings under workshop lighting. For procurement and integration into a toolset, Metav IndustryLine instruments are supplied via Metav Werkzeuge, whose warehousing and quality control help ensure timely delivery and consistent product standards to the European market. Contact Metav Werkzeuge to discuss the Metav IndustryLine bevel protractor M214.151 for your application or to request specification support and procurement guidance Technical data Article number: M214.151 GTIN: 4054469106854 ECLASS: 21170304 Customs tariff number: 90178090 Core technical data Measuring range: 0–180° Scale graduation: 1° Dimensions: 120 x 150 mm Diameter: 110 mm Cross-section: 12 x 2.2 mm Materials and special features Material: Steel, matt chrome-plated Locking screw Category: Angle measuring instruments FAQ How accurate is the bevel protractor for routine workshop checks? The bevel protractor M214.151 provides a readable 1° graduation, which is appropriate for standard workshop layout and inspection tasks; the locking screw helps secure settings for reproducible checks. Can the instrument withstand daily use in a fabrication environment? Yes, the matt chrome-plated steel construction of the M214.151 is designed for workshop durability and reduced glare, supporting frequent use without rapid surface wear. Is the bevel protractor suitable for tight or confined assemblies? The compact 120 x 150 mm format and slim cross-section make this angle gauge well suited to tighter assemblies where larger tools would be impractical. Does the product include any accessories or special packaging? The listing for the Metav IndustryLine bevel protractor M214.151 states the instrument and its core features; additional packaging or accessories are listed separately where applicable. Which category and SKU identify this instrument for ordering? This instrument is an angle measuring instrument (bevel protractor) available as SKU M214.151 under the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Protractor 120 x 150 mm Stainless Steel Scale Rail With Locking Screw - Metav IndustryLine
Take advantage of the combination of stainless-steel construction, a 0–180° measurement range and a secure locking screw for dependable angle layout and repeatable shop-floor results — order the instrument directly via Metav Werkzeuge or consult the team for application advice. Angle protractor, 0–180°, 120 x 150 mm, stainless steel, with locking screw — Metav IndustryLine The Angle protractor, 0–180°, 120 x 150 mm, stainless steel, with locking screw is a compact workshop protractor for precise layout, inspection and assembly tasks, designed to transfer and lock angles reliably across a range of metalworking and fabrication applications. 0–180° measurement range Stainless-steel construction Integrated mm scale on arm Locking screw for fixed readings Consistent alignment for everyday layout work The robust stainless steel body and a clear 0–180° scale make this angle instrument suitable for repetitive layout and inspection tasks where consistency matters. The flat 120 x 150 mm profile sits neatly against workpieces for secure contact, while the integrated mm scale on the arm provides an additional linear reference for positioning. Together these features reduce setup time and support accurate transfer of angles from drawings to parts. Clear graduations and secure readings reduce rework Graduated in whole degrees with an indicated reading step of 1°, the instrument gives unambiguous angle values that are quick to read and easy to verify. The slim 13 x 1.2 mm cross-section of the blade balances low weight with sufficient stiffness to resist twist during measurement, improving repeatability in routine machining and assembly. The locking screw fixes the arm in place to prevent accidental movement and ensures the chosen angle is maintained during marking or clamping. Durable design for workshop conditions Made from corrosion-resistant stainless steel, this protractor withstands regular handling and cleaning without surface degradation. The simple geometry minimises dirt traps and allows quick visual checks of the scale, supporting uninterrupted workflow in busy workshop environments. Its straightforward construction also makes it a reliable choice for bench layout, jig setup and general angle checks where a no-nonsense, long-lasting tool is preferred. Contact Metav Werkzeuge for procurement or technical guidance on application suitability and integration into production workflows — Metav IndustryLine tools are available via Metav Werkzeuge and expert advice is provided by the Metav team Technical Data SKU: M214.148 GTIN: 4054469164182 eClass: 21170304 Customs tariff number: 90178090 Facts Measurement range: 0–180° Dimensions: 120 x 150 mm Diameter: 110 mm Cross-section: 13 x 1.2 mm Graduation: 1° Special features Material: stainless steel Arm with mm scale Locking screw for fixed readings Corrosion-resistant construction FAQ How fine is the graduation on this protractor? The protractor is graduated in whole degrees with a reading step of 1°, suitable for standard layout and inspection tasks. Is the protractor suitable for use in metalworking shops? Yes — the stainless-steel construction and locking screw make the protractor well suited to general metalworking, fabrication and assembly operations. Can the instrument be used for both marking and inspection? The integrated mm scale and stable blade allow transfer of angles for marking as well as visual inspection of assembled parts. Which model and brand should be referenced when ordering? Order the Metav IndustryLine angle protractor, SKU M214.148, for workshop-grade angle layout tools. Does the arm include an additional linear scale? Yes, the arm features a millimetre scale to support positioning alongside angular measurement. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Protractor 150×200 mm Matt Chrome With Locking Screw - Metav IndustryLine
Take advantage of precise, repeatable angle measurement through the combination of a 0–180° scale, a secure locking screw, and a matt chrome-plated steel finish that reduces glare for clearer reading; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. M214.152 Bevel Protractor — 0–180°, Lockable, Matt Chrome (Metav IndustryLine) The M214.152 is a lockable bevel protractor designed for precise angle checks and setup tasks in workshop and inspection environments, featuring a clear 0–180° scale and matt chrome-plated steel construction. 0–180° scale with clear graduation Locking screw for repeatable measurements Matt chrome-plated steel finish Compact 150 x 200 mm working plate Precise, repeatable angle control for setups and inspections The bevel protractor delivers a straightforward measurement workflow based on a 0–180° graduated scale and a firm locking screw, which together guarantee repeatable settings for fixture alignment and component inspection. The graduated disc is divided in 1° steps, providing a reliable visual reference for fast checks and adjustments; this straightforward resolution suits everyday workshop tasks where rapid verification and reproducibility are required. The robust construction minimises flex under handling, so angle transfers remain consistent over time. Easier handling and faster readings reduce inspection time A compact working plate of 150 x 200 mm combined with a 12 x 2.5 mm cross-section offers a balanced mix of reach and torsional stiffness, making the instrument easy to position while resisting twist during measurement. The matt chrome finish cuts surface reflections, improving contrast on the engraved scale and enabling quicker, less error-prone readings under workshop lighting. The tool’s geometry supports common tasks such as checking mitre angles, aligning machine set-ups and verifying jig orientation with minimal secondary tools. Built for workshop durability and straightforward use Manufactured in matt chrome-plated steel, the protractor resists everyday wear and provides a tactile, corrosion-resistant surface that tolerates routine handling. Its category as an angle measuring instrument suits assembly, metalworking and inspection benches where robust, low-maintenance gauges are preferred. Clear, mechanical scale readability means no batteries or electronics are required, ensuring uninterrupted service and low ownership complexity while retaining the precision needed for production support. Contact Metav Werkzeuge today for tailored advice on integrating the M214.152 bevel protractor into production and inspection workflows — Metav Werkzeuge can confirm suitability and supply directly from Emmerich. Technical data Article number: M214.152 GTIN: 4054469106861 EClass: 21170304 Dimensions: 150 x 200 mm Measuring range: 0–180° Scale division: 1° Cross-section: 12 x 2.5 mm Material: Steel, matt chrome-plated Locking screw: Yes Tariff code: 90178090 Facts Measuring range: 0–180° Scale division: 1° Plate dimensions: 150 x 200 mm Cross-section: 12 x 2.5 mm Diameter: 140 mm Tariff number: 90178090 Special features Locking screw for repeatability Matt chrome-plated finish Steel construction for durability Category: Angle measuring instruments FAQ What measuring range does this protractor cover? The bevel protractor M214.152 from Metav IndustryLine covers a 0–180° measuring range and is intended for general workshop angle checks. How fine is the scale on this instrument? The instrument uses a 1° graduation; the clear engraving and matt chrome finish on the M214.152 support quick visual readings. Is the protractor suitable for machine set-up tasks? Yes — the M214.152 bevel protractor is designed for workshop and inspection use, offering a compact 150 x 200 mm working plate and a locking screw for repeatable setups. What materials and finish are used on the protractor? Constructed from steel with a matt chrome-plated finish, the M214.152 is built to resist reflections and routine workshop wear. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Stainless Steel Digital Protractor 120 x 150 mm Resolution 0.05° Accuracy ±15′ Hold/Zero Lock - Metav IndustryLine
Take advantage of the combination of robust stainless-steel construction, a wide 0–180° measuring range with a fine 0.05° readout and an accuracy of ±15′ for reliable alignment in production and maintenance. Order the Digital Angle Gauge directly via Metav Werkzeuge or ask our consultants if needed. Digital Angle Gauge M214.040 — stainless-steel, 0–180° with locking screw (Metav IndustryLine) A Digital Angle Gauge M214.040 designed for precise angular measurement and repeatable alignment tasks in workshops, inspection benches and assembly stations. Stainless-steel construction for durability 0–180° range with 0.05° resolution ±15′ accuracy for precise alignment Locking screw and Hold/Zero controls Robust build for dependable everyday use Constructed from stainless steel, the instrument offers corrosion resistance and a stable contact surface that maintains rigidity during routine handling. The compact plate (120 x 150 mm) and the indicated cross-section combine to provide a flat, repeatable reference that reduces the influence of flexing or chatter when measuring on machine beds or jigs. This mechanical stability translates into fewer re-checks and less downtime during setup. Fast, accurate readings to speed alignment work The gauge covers a 0–180° range with a display resolution of 0.05° and an overall accuracy of ±15′ (15 arcminutes). The digital readout, combined with functional keys — On/Off, Zero, Hold and Rev — enables quick zeroing on a reference surface, capturing a stable measurement with Hold, or reversing the display orientation for awkward positions. The locking screw secures the measured angle for subsequent transfer or clamping, making the tool well suited for both one-off adjustments and series assembly where repeatability reduces scrap. Designed to fit into workshop quality routines The instrument integrates easily into standard inspection and set-up procedures, offering a balance of portability and precision that suits maintenance technicians and quality teams alike. As part of the Metav IndustryLine range, the gauge benefits from the parent company’s focus on practical precision: fast availability from Emmerich, a broad catalogue of complementary tools and a proven supply chain that supports continuous production. The result is a tool that helps reduce inspection time while increasing confidence in alignment tasks. Contact Metav Werkzeuge for tailored technical advice or to secure the Metav IndustryLine digital angle gauge for workshop and inspection use. Technical Data Article number: M214.040 Manufacturer: Metav IndustryLine Product name: Digital angle gauge, stainless-steel Facts Measuring range: 0–180° Readout / resolution: 0.05° Accuracy: ±15′ (15 arcminutes) Dimensions: 120 x 150 mm Cross-section: 22 x 3 mm Special features Material: stainless steel Controls: On/Off, Zero, Hold, Rev Locking: locking screw for fixed readings FAQ What resolution and accuracy can be expected? The Metav IndustryLine digital angle gauge M214.040 provides a resolution of 0.05° and an accuracy of ±15′ (15 arcminutes), suitable for workshop alignment and inspection. How does the Hold and Zero function support measurement tasks? The Zero function allows setting a local reference, while Hold captures a stable reading to transfer or record; both functions on the M214.040 simplify comparative checks and angle transfer operations. Is the gauge robust enough for shop-floor use? Yes. The gauge’s stainless-steel construction and locking screw are intended to withstand routine workshop handling while maintaining repeatable reference surfaces. Can the instrument be used for bench inspection as well as machine set-up? The instrument is designed for both contexts: the plate format and digital readout suit bench inspection, while the locking screw and reverse display facilitate in-situ machine set-up. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ensure precise alignment across your workflow
Angle measuring instruments, also offered as angle gauges, inclinometers or digital angle finders, provide the foundational accuracy required in modern manufacturing, machine building and professional workshops. These instruments permit reliable angle determination, transferring angular measurements directly to workpieces and verifying geometric conformity during production and inspection.
How these instruments work and where they are essential
Mechanical angle gauges typically consist of a semicircular protractor and a movable arm with a precise vernier, plus a locking screw to fix the measured value for transfer or repeated checks. Digital angle measuring instruments combine robust mechanical legs with electronic sensors and an LCD display, delivering immediate readings that reduce interpretation errors and accelerate routine checks. Digital inclinometers determine angles relative to gravity and can show relative and absolute inclinations simultaneously, making them ideal for aligning machine beds, pipework or axes where gravity-referenced angles matter.
Measurable benefits that improve production efficiency
- Faster setup and fewer rejects thanks to the zero function, which allows the display to be zeroed at any position for quick relative measurements.
- Safer readings in confined or overhead positions using the hold function and rev function for 180° display rotation.
- Reduced downtime and wear by using instruments with chromed special steel housings or anodised aluminium bodies that resist corrosion and maintain profile stiffness.
- Hands-free alignment on ferrous surfaces through a robust magnetic base, enabling single-operator adjustment on steel constructions.
- Dependable analogue options with a high-precision vernier for environments where electronic devices are unsuitable.
Metav: precision made accessible for every workshop
Metav positions itself as a dependable partner for industrial buyers who require both variety and quality. Based in Emmerich, Metav acts as a quality filter for the European market, offering an extensive range of analogue and digital angle measuring instruments alongside comprehensive workshop equipment. With over 48,000 customers and a catalogue exceeding 250,000 products, Metav supplies reliable stock and clear order handling so teams can focus on production rather than logistics. If you require rapid selection advice or product matching, Metav’s curated assortment simplifies procurement decisions for maintenance, toolrooms and quality departments.
Compact summary
Angle measuring instruments, whether analogue or digital, secure repeatable alignment, speed up inspection processes and reduce rework by combining proven mechanical design with modern sensor functions such as zero, hold and rev.
FAQ
What is the advantage of a digital inclinometer over a mechanical angle gauge?
A digital inclinometer delivers immediate numeric readings on an LCD display and often includes functions such as zero, hold and rev, making the device faster and less error-prone for serial inspections than a purely mechanical angle gauge.
When should I choose an instrument with a magnetic base?
Choose an instrument with a magnetic base for alignment tasks on ferrous constructions, such as machine beds or steel frames, where hands-free positioning and stable attachment significantly improve accuracy and safety.
Are anodised aluminium instruments suitable for mobile service work?
Yes. Instruments with anodised aluminium bodies offer low weight with high profile stiffness, making them especially suitable for large-format tools and mobile service engineers who need portability without compromising precision.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com