Precise angle measurement for reliable machining setups
Angle measuring instruments and their variants such as inclinometers, goniometers and protractors provide exact determination of inclinations to ensure dimensional accuracy and process stability in metalworking and machine building. Designed for workshop use or laboratory quality control, these devices enable precise alignment of components and transfer of angle values onto workpieces, with options ranging from robust mechanical protractors to high-resolution digital inclinometers. Features like zeroing, hold and reverse display modes support efficient serial inspection and machine setup, while materials such as matt-chromed special steel or anodised aluminium ensure durability and resistance to coolants and workshop conditions.
200mm Digital Angle Gauge 0–360° Range, 0.05° Resolution, Reversible Display, mm Scale - Metav IndustryLine
The combination of a full-circle 0–360° measuring range, fine 0.05° resolution and a rotatable display ensures fast, repeatable angular set-up and inspection. Take advantage of the compact 200 mm blade and workshop-ready controls for efficient alignment tasks; order the digital angle gauge directly via Metav Werkzeuge or consult the technical advisors for specification support. Digital Angle Gauge M214.142.N — 0–360° digital protractor, 200 mm (Metav IndustryLine) The Digital Angle Gauge M214.142.N is a compact instrument for precise angular measurement and alignment in workshop, toolroom and production environments, combining a full 360° range with a clear, rotatable readout and tactile function keys. 0–360° measurement range 0.05° display resolution Rotatable LCD for flexible reading ON/OFF, ZERO, HOLD/REV controls Precision that speeds up set-up and inspection The gauge delivers a continuous 0–360° range with a display resolution of 0.05°, allowing fine angular adjustments and reliable comparison measurements. High resolution reduces the need for repeated checks and supports quicker set-ups on jigs, fixtures and machine table alignments. The numeric readout minimises interpretation error compared with analogue scales, contributing to more consistent production tolerances and fewer reworks. Ergonomic design for workshop conditions A 200 mm blade combined with a slim 28 x 1.2 mm cross-section gives a balance of reach and stiffness suitable for bench and on-machine use. The rotatable display keeps the value legible from any approach angle, reducing awkward repositioning during measurement tasks. The compact profile eases handling in confined spaces and supports repeatable placement on parts and fixtures without excessive bulk. Practical controls that reduce measurement steps Direct tactile keys — ON/OFF, ZERO and HOLD/REV — simplify common operations: zeroing for relative angle checks, holding transient readings and reversing the display for inverted viewing. These functions translate into fewer process interruptions and faster decision-making during setup or inspection. The hold function, in particular, helps capture values in awkward positions where steady reading would otherwise be difficult. Workshop-ready features for daily use An integrated mm scale on the blade supports quick visual checks alongside the digital readout for coarse referencing, while the device is supplied in a blister pack for straightforward inventory handling. The combination of a clear digital display and a mechanical scale provides both rapid orientation and precise numeric feedback, making the instrument suitable for alignment, angle transfer and routine QA tasks in metalworking and maintenance. For reliable angular measurement from Metav IndustryLine, request the M214.142.N via Metav Werkzeuge for rapid delivery and tailored technical advice — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M214.142.N Description: Digital angle gauge, 0–360°, 200 mm, blister pack Manufacturer: Metav IndustryLine Facts Measurement range: 0–360° Display resolution: 0.05° Blade length: 200 mm Cross-section: 28 x 1.2 mm Special features Rotatable display for flexible viewing ON/OFF, ZERO and HOLD/REV keys mm-scale on the blade Supplied in blister pack FAQ What measurement accuracy does the device provide? The instrument offers a display resolution of 0.05° and a continuous measurement range from 0 to 360°, enabling fine angular readings for alignment and inspection tasks. Is this unit suitable for machine set-up and fixture alignment? Yes. The 200 mm blade length with a slim profile and the rotatable display make the gauge suitable for machine table alignment, fixture set-up and general workshop use. How does the rotatable display and HOLD/REV function help on the shop floor? The rotatable display allows readings from different orientations without moving the workpiece; the HOLD/REV function captures transient values and inverts the readout for convenient viewing in confined positions. Is there information about power or battery type? Battery specifications are not provided in the available product data for the M214.142.N. Does the blade include a visual scale for quick checks? Yes. The blade is provided with an mm-scale for quick visual reference alongside the digital angle measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Three-Point Angle Gauge 360° Scale With Magnifier, Vernier Fine Adjustment, Parallax-Free Reading, Case - Metav IndustryLine
Take advantage of a compact, workshop-ready instrument that combines a 360° scale with a 200 mm rail and a magnifier for clear, repeatable angle measurement; the fine-adjustment spindle and parallax-free reading help reduce setup time and rework. Order directly via Metav Werkzeuge or consult our specialists for specification matching and supply. TOP Angle Measuring Instrument (M214.092.T) — 360° protractor with 200 mm rail and magnifier by Metav IndustryLine TOP Angle Measuring Instrument (M214.092.T) is an analogue 360° protractor on a 200 mm hardened rail, equipped with a magnifier, auxiliary angle and fine-adjustment spindle for workshop inspection and production layout tasks. 360° scale with auxiliary angle 200 mm hardened measuring rail Parallax-free reading with magnifier Fine-adjustment spindle for precise setting Accurate, measurable angles that speed inspection The instrument delivers a 360° measurement capability arranged as 4x90° quadrants, enabling quick angular checks across full rotations. The scale reading is 1/12° (5') with a stated measurement accuracy of ±10' (arc minutes), which makes the tool suited to precise layout tasks and incoming inspection where reproducibility is required. As an analogue protractor with a clear vernier and magnified scale, it reduces interpretation errors and helps avoid costly rework by providing an immediately verifiable result. Robust rail and compact handling for shop use The 200 mm rail with a 16 x 2.5 mm cross-section gives a balance of stiffness and portability; at approximately 0.6 kg, the assembly is easy to position on jigs and fixtures while remaining stable under typical workshop loads. The compact construction and solid rail profile support repeatable alignment on components and fixtures, which speeds cycle times during setup and reduces measurement-related downtime. Practical features designed for repeatability and ease A built-in magnifier and parallax-free reading enhance visibility on the scale, while the fine-adjustment spindle permits subtle, reproducible corrections without shifting the instrument. The auxiliary angle attachment extends flexibility for smaller angles and confined spaces. Supplied in a protective case for safe transport and storage, the instrument is configured to support routine inspection, layout and verification tasks with dependable, easy-to-read results. Contact Metav Werkzeuge to request bespoke technical advice on the TOP angle measuring instrument and confirm immediate availability from our Emmerich warehouse. Technical data Article number: M214.092.T GTIN: 4054469106533 Tariff number: 90178090 Weight: 0.6 kg Cross-section: 16 x 2.5 mm Rail length: 200 mm Facts Measurement range: 4x90° (360°) Resolution: 1/12° (5') Accuracy: ±10' (arc minutes) Analogue reading: yes Special features Parallax-free reading with magnifier Auxiliary angle for smaller angles Fine-adjustment spindle for precise setting Supplied in protective case FAQ What is the measurement accuracy of this instrument? The instrument offers an accuracy of ±10' (arc minutes); the scale resolution is 1/12° (5'), providing clear analogue readings for workshop inspection. Is the device suitable for full 360° checks? Yes — the protractor covers 360° arranged as 4x90°, allowing checks across all quadrants without repositioning the main rail. Does the instrument include aids for fine alignment? A fine-adjustment spindle and a magnifier are integrated to permit subtle, repeatable alignment and magnified scale reading for improved precision. Is the instrument easy to handle on the shop floor? Designed for workshop use, the tool combines a 200 mm rail and a compact build (approx. 0.6 kg) to balance stiffness with manoeuvrability; it is supplied in a protective case for transport and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Universal Angle Gauge With Dial Indicator, Fine Adjustment, 360° Scale - Metav IndustryLine
Combining a 360° scale with an integrated dial indicator and a precise fine-adjustment, this instrument delivers repeatable angle settings and dependable inspection results; ideal for set‑ups where swift, verifiable alignment reduces downtime. Order the instrument directly via Metav Werkzeuge or ask our consultants if needed. Universal angle gauge with dial — 360° scale, 200 mm slide (Metav IndustryLine) Universal angle gauge with dial is an analogue angle measuring instrument for workshop set‑up and inspection, offering full 360° coverage and micrometre‑style fine adjustment on a 200 mm slide for precise alignment in machining and inspection tasks. 360° scale with 200 mm slide Integrated dial indicator for incremental checks Fine adjustment for repeatable alignment Accuracy 10 arcminutes Precision that stabilises process control The instrument combines a clear analogue scale with an integrated dial indicator, making angular measurement and verification straightforward in production environments. Readability to 1/12° (approx. 5 arcminutes) supports fine setting, while an assessed accuracy of 10 arcminutes ensures that adjustments and recorded values are within predictable tolerances. This mix of readable resolution and measured accuracy reduces rework and speeds up machine set‑ups, providing a tangible improvement in throughput and quality control. The presence of a dedicated dial means incremental deviations can be monitored without complex electronics, supporting rapid decision‑making on the shop floor. Robust workshop design for repeatable handling Built with a compact cross‑section of 16 × 2.5 mm and a 200 mm slide, the device balances stiffness and manoeuvrability for routine use at workstations and in toolrooms. At only 0.6 kg it is light enough for single‑operator handling yet designed to resist torsion during clamping and alignment tasks. The fine‑adjustment mechanism secures target positions and permits micro‑corrections without overshoot, which leads to fewer iterative adjustments and a lower risk of surface damage on jigs and fixtures. As an analogue angle gauge with a mechanical dial, it is well suited to environments where robustness and immediate visual feedback matter most. Practical applications and efficiency gains Designed for machinists, maintenance teams and inspection personnel, the instrument excels in tasks such as fixture alignment, component inspection and setting angular toolholders. The four‑quadrant 4 × 90° arrangement provides full‑circle capability for complex assemblies, while the integrated dial supports repeat checks during multi‑stage processes. By converting angular measurement into repeatable mechanical settings, the device shortens setup times and reduces measurement uncertainty in serial production. When documented traceability of adjustments is required within routine workflows, the combination of clear scale, dial readout and fine‑adjustment becomes a reliable method for both initial setting and subsequent verification. For machine shops seeking dependable angle control, select the Metav IndustryLine Universal angle gauge (M214.082.T) and contact Metav Werkzeuge in Emmerich for personalised advice and ordering at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: M214.082.T GTIN: 4054469106489 Manufacturer: Metav IndustryLine Category: Angle measuring instrument eClass: 21170322 Tariff number: 90178090 Core specifications Slide length: 200 mm Cross‑section: 16 x 2.5 mm Weight: 0.6 kg Accuracy: 10 arcminutes Readability: 1/12° Measurement range: 4 x 90° Features Analogue instrument Integrated dial gauge Fine adjustment mechanism Full‑circle 360° capability Compact, stiff profile for stable measurements FAQ What level of accuracy does the instrument deliver? The instrument provides an assessed accuracy of 10 arcminutes; readable increments are to 1/12° for straightforward visual setting and verification. Can this angle gauge be used for full‑circle measurements? Yes — the device features a 4 × 90° layout that delivers full 360° coverage for versatile alignment and inspection tasks. Is the instrument suitable for workshop set‑ups and routine inspections? The Metav IndustryLine universal angle gauge (M214.082.T) is designed for workshop use, combining a robust 200 mm slide, an integrated dial and fine adjustment to support repeatable set‑ups and checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200° Digital Angle Gauge Rotatable Display, 0.1° Resolution, 200mm Range - Metav IndustryLine
Take advantage of the combination of a rotatable digital display, a 0–180° measuring range and fine 0.1° graduation to ensure fast, reproducible angle checks on fixtures and components; order directly via Metav Werkzeuge or contact our consultants for application advice. Digital angle gauge M214.142 — 0–180°, 200 mm, rotatable readout (Metav IndustryLine) A Digital angle gauge M214.142 designed for clear, repeatable angle measurement across a 0–180° range, suited to workshop set‑up, quality control and machine alignment tasks Rotatable digital display with HOLD/REV function 0–180° measuring range for versatile angle checks 0.1° graduation for precise positioning Slim 27.2×1.2 mm profile, 200 mm length Precise angle control that speeds up set‑up and inspection The gauge delivers 0.1° graduation, which converts to reliably finer alignment than common workshop presets; this level of resolution reduces iterative adjustment cycles and therefore cuts machine downtime. The built‑in digital readout records and holds values with the HOLD/REV function, making it straightforward to transfer measured angles into setup documentation or to compare different positions. The 0–180° measuring span supports a wide range of fixturing tasks, so fewer specialised tools are needed on the workbench. Readable, flexible display for everyday workshop use A rotatable display improves ergonomics and safety by keeping the readout visible from different working angles, even when the gauge is used in confined or awkward set‑ups. The panel offers ON/OFF, ZERO and HOLD/REV controls for quick zeroing, temporary value freeze and mirrored readings; these functions simplify measurement workflows and reduce handling errors. The instrument’s compact mass and slim 27.2×1.2 mm profile help with one‑hand manoeuvrability while maintaining the stiffness required for consistent measurement transfer. Robust repeatability and straightforward application in production Designed for routine shop use, the instrument combines a clear digital interface with a 200 mm length that balances reach and control for common workshop components. Zeroing at any reference position enables comparative checks and repeat measurements without additional reference gauges, supporting traceable quality checks across batches. The solid, no‑nonsense feature set is optimal where dependable angle information is needed quickly — for machine alignment, jig verification and incoming part inspection. For precise angle control and reliable workshop integration, contact Metav Werkzeuge in Emmerich to order the Metav IndustryLine M214.142 or request tailored application advice at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M214.142 GTIN: 4054469106823 eClass: 21170130 Customs tariff: 90178090 Numbers / Core technical data Measuring range: 0–180° Graduation: 0.1° Length: 200 mm Cross section: 27.2×1.2 mm Weight: 0.5 kg Special features / Versions Digital display with ON/OFF, ZERO, HOLD/REV buttons Rotatable readout for improved visibility Supplied in blister packaging Category: Angle measuring instruments FAQ How fine is the resolution of the instrument? The M214.142 provides a 0.1° graduation, offering finer alignment capability than standard coarse protractors and enabling precise set‑up and inspection. Can the display be read from different positions on the workshop floor? Yes. The gauge features a rotatable digital display so readings remain legible when the instrument is flipped or viewed from alternative angles. Which range of applications suits this angle gauge? Typical uses include machine alignment, fixture set‑up and incoming part checks; the 0–180° span and 200 mm blade make it versatile for many workshop tasks. Does the device include functions for value transfer and comparison? The digital panel includes ZERO for setting a reference and HOLD/REV to freeze or mirror values, which helps with transfer and comparative checks. Is the M214.142 suitable for repetitive production checks? Yes. Its combination of readable digital feedback, repeatable zeroing and compact form supports fast, repeatable measurements on production lines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200° Sine Bar With Table And Support Cylinders, Hardened Steel, 1.9 kg, Supplied In Case - Metav IndustryLine
Take advantage of the combination of durable hardened steel construction, a compact 200 mm measuring length and a practical accessory set for reliable, reproducible angle setting; order the tool directly via Metav Werkzeuge or contact the consultants for tailored advice. Sine Bar 200 mm (M318.212) — hardened steel, 0–60° range A Sine Bar 200 mm designed for precise angle setting on inspection benches and in toolrooms, ideal for set-ups that demand repeatable angular positioning. Hardened steel construction 200 mm measuring length Angle range 0–60° Supplied with table and support cylinders Stable construction for reproducible set-ups A compact, fully hardened steel body provides the stiffness required for repeatable angle setting across multiple operations. The bar's 200 mm measuring length promotes a practical balance between reach and rigidity so that adjustments remain stable during machining and inspection. The specified parallelism value supports consistent contact geometry, reducing variation between successive measurements. These engineering choices minimise set-up time and help maintain production throughput while ensuring repeatability on the shop floor. Practical accessories and the sine principle explained Delivered together with a matching table and support cylinders, the tool enables classic sine-bar routines: the required height for a given angle is calculated from the sine function and established using the support cylinders and table. This familiar workflow converts mathematical angle values into mechanical height settings without complex instrumentation, which is particularly useful in toolmaking, jig adjustment and pre-setting operations. The included accessories remove guesswork and speed up alignment, enhancing efficiency during frequent changeovers. Workflow benefits for inspection and set-up tasks Using a dedicated sine bar reduces dependency on trial-and-error adjustments and lowers the risk of assembly errors. The 0–60° range covers the majority of angular set-ups encountered in jigs, fixtures and component checks. Supplied in a protective transport case, the unit arrives ready for safe storage and straightforward handling between measuring stations. The compact format and accessory package make it well suited to busy inspection benches where space, robustness and ease of use are decisive. Contact Metav Werkzeuge for a detailed consultation on the Sine Bar 200 mm (M318.212) and to arrange supply from our Emmerich distribution centre: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Designation: Sine bar 200 mm, 1,9 kg SKU: M318.212 GTIN: 4054469128146 ECLASS: 21170140 Brand: Metav IndustryLine Facts Measuring length: 200 mm Angle range: 0–60° Support distance: 200 mm Parallelism: 2.5 Customs tariff: 90173000 Special features Material: fully hardened steel Supplied with table and support cylinders Delivered in transport case FAQ What angle range does the sine bar cover? The Sine Bar 200 mm provides an angle range from 0–60° and a measuring length of 200 mm (SKU M318.212) for standard set-up work. What accessories are included for setting angles? The unit is supplied with a table and support cylinders to establish the required heights according to the sine principle, and it arrives in a transport case for safe storage. What construction and material quality can be expected? The sine bar is manufactured from fully hardened steel, giving the rigidity needed for reproducible results and robust daily use. What precision characteristics are specified? The tool lists a precision index of 4 and a parallelism value of 2.5, reflecting its design for reliable alignment and inspection tasks. How is the sine method applied in practice? Heights are calculated from the sine of the desired angle and set using the support cylinders on the supplied table; this converts the mathematical angle directly into the mechanical set-up used on the bench. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Bubble Level 25 Arc Min Accuracy, IP Rating Not Specified - Bayerische Maß-Industrie Arno Keller GmbH
Take advantage of the combination of compact size, reliable sensitivity and simple integration for accurate machine levelling; order the circular vial directly via Metav Werkzeuge or consult the technical advisers for specification support. Circular vial »20 mm, 25 min« (BMI) — Precision levelling insert Circular vial »20 mm, 25 min« (BMI) for precise alignment and levelling tasks in machine setup and inspection fixtures. Circular vial: 20 mm outer diameter Sensitivity: 25 arc minutes From Bayerische Maß‑Industrie (BMI) Accurate levelling for machine setup and alignment The circular vial delivers a compact solution for precision levelling in confined assemblies and machine beds. With an outer diameter of 20 mm and a sensitivity of 25 arc minutes, the vial provides a reliably measurable response to small angular deviations; 25 arc minutes correspond to approximately 0.42°, enabling detection of subtle misalignments during initial machine installation or subsequent checks. The small footprint suits integration into jigs, gauges or instrument housings where a full-length spirit level is impractical, while maintaining the clear bubble behaviour needed for repeatable readings. This results in a faster, more efficient setup process and reduced downtime when establishing machine datum planes. Compact design that supports consistent measurements Designed for use where space is limited, the spirit vial insert combines a compact diameter with a visible, stable bubble for consistent readings. The round profile assists in seating the vial into circular bores or recesses commonly found in fixtures and test rigs. Where quick visual confirmation of level is required, the vial’s sensitivity provides an objective indicator without complex electronics, supporting straightforward decision-making on-site. For workshops and inspection areas that value durability and simplicity, the insert offers a robust alternative to larger levelling tools while preserving the fidelity of the measurement result. Easy interpretation and straightforward installation The bubble movement in the circular spirit vial is intuitive to read and easy to interpret even by operators with limited metrology training; the principle is simple yet effective. Integration typically requires a circular recess matching the 20 mm diameter and a secure fixation to prevent play; once installed, the vial serves as a passive, maintenance‑free indicator. For applications that demand traceable alignment, combining this mechanical indicator with other measurement methods provides both rapid checks and quantitative verification. The compact indicator thus supports lean workflows and helps maintain process stability across repetitive setups. Contact Metav Werkzeuge for specification advice or to arrange procurement of the circular vial; Metav Werkzeuge’s consultants can advise on suitability for specific levelling tasks and integration options Technical data Article number: 4000857462NW Label: Circular vial 20 mm 25 min BMI Brand: Bayerische Maß‑Industrie Arno Keller GmbH Packaging unit: 1 UID: 4000857462NW Facts Outer diameter: 20 mm Sensitivity: 25 arc minutes (≈ 0.42°) Special features Circular spirit vial for levelling applications Compact format for insertion into fixtures and housings Simple visual bubble indication FAQ What level of sensitivity does this circular vial provide? The circular vial offers a sensitivity of 25 arc minutes, which is about 0.42°, enabling detection of small angular deviations suitable for machine levelling and alignment tasks. Can the vial be fitted into custom fixtures and gauges? Yes, the vial is intended for insertion into circular recesses or housings with a corresponding 20 mm bore; secure fixation is recommended to ensure consistent readings. Is the circular vial suitable for continuous monitoring in a production environment? The vial functions as a passive visual indicator; it is suitable for frequent checks and quick verifications but should be combined with periodic quantitative measurements for full traceability. How is the product identified for ordering or replacement? This circular vial is listed under SKU 4000857462NW and labelled Circular vial 20 mm 25 min BMI for clear identification when specifying replacements or spares. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
230mm 270° Angle Gauge Adjustable Leg 30mm, Precision Steel - SOLA-Messwerkzeuge GmbH & Co KG
Take advantage of high measurement reliability and straightforward workshop handling thanks to a broad 270° measuring range and a stable 230 mm leg, combined with trusted SOLA workmanship; order directly via Metav Werkzeuge or contact our consultants for application advice. WMD 200 Angle Gauge – 270° measuring range, 230 mm leg (SOLA) TheWMD 200 Angle Gaugeis designed for rapid, reliable angle checks in workshop and on-site settings, combining a wide measuring arc with a firm support leg for consistent readings. *Wide 270° measuring range for versatile use *Long 230 mm leg for stable placement *Clear scale for quick visual readings *SOLA brand reliability for workshop environments Measure wide angles with clear, reliable readings The broad 270° measuring capability ensures that most common and obtuse angles can be measured without repositioning the instrument, reducing handling time and potential alignment error. The wide arc delivers a practical advantage in layout work and assembly checks where a continuous angular reference is required. By offering an extensive measuring span, the tool supports efficient workflows and fewer setup steps, so measurement tasks are completed faster and with predictable results. The construction prioritises readable graduations to make angle determination both quick and dependable. Stable support for improved accuracy on varied surfaces A longer leg of 230 mm gives the gauge improved support and leverage when placed against workpieces, promoting repeatable alignment across flat and slightly uneven surfaces. The extended support reduces rocking and rotation during reading, which in turn lowers the risk of parallax error when viewing the scale. For trades and maintenance tasks where repeatability matters — such as jig checks, gating, or simple set-ups — the instrument’s geometry helps secure a consistent datum so fewer rechecks are necessary. The design therefore contributes directly to time savings and fewer measurement-related interruptions. Practical workshop integration and dependable build quality Engineered by a recognised metrology brand, the device combines straightforward operation with robustness suited to daily workshop use. The simple layout enables rapid comparative checks and quick transfer of angular information to machining or assembly tasks. Where instrument choice must balance ease of use and longevity, the gauge provides a compact solution that integrates into existing tool kits without complex calibration routines. The familiar form factor supports quick training for staff and immediate adoption on the shop floor, while the brand reputation underlines a focus on consistent manufacturing standards. Contact Metav Werkzeuge for precise application guidance or to confirm suitability for specific tasks; technical consultants are available via info@metav-werkzeuge.com or +49 2822 7131930 and can advise on integrating the WMD 200 into current workflows Technical data Article number: 4000857040NW Type: WMD 200 Label: Angle gauge WMD 200, measuring range 270°, leg length 230 mm, SOLA Manufacturer: SOLA‑Messwerkzeuge GmbH & Co KG Packaging unit: 1 Facts Measuring range: 270° Leg length: 230 mm SKU / UID: 4000857040NW Special features Product type: Angle gauge Brand: SOLA‑Messwerkzeuge Suitable for workshop and on-site angle checks FAQ How large is the measuring arc of this gauge? The instrument offers a 270° measuring arc, which allows a wide variety of angles to be checked without frequent repositioning of the tool. Is the leg length sufficient for stable readings on flat stock? Yes, the 230 mm leg provides a stable base that reduces rocking and helps achieve repeatable readings during routine workshop checks. Can the WMD 200 be used for both assembly and layout tasks? The WMD 200 angle gauge is designed for general assembly and layout work, facilitating quick transfer of angular references and comparative checks on the shop floor. Does the gauge require complex calibration before use? No specialised calibration is necessary for basic workshop checks; the gauge is ready for immediate use for comparative and layout measurements once placed against a datum. What distinguishes this SOLA angle gauge from general-purpose protractors? The gauge combines an extended measuring range and a longer support leg for improved stability, delivering more consistent results in repetitive workshop applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Bevel Gauge With Slotted Blade, Aluminium Handle 160x30mm - Metav IndustryLine
Take advantage of a 250 mm slotted blade, a black anodised aluminium handle and a secure locking screw for reliable angle transfer and quick setup in the workshop. Order the sliding bevel directly via Metav Werkzeuge or ask the consultants for application advice. Sliding bevel M214.146 – 250 mm slotted blade, anodised aluminium handle (Metav IndustryLine) A Sliding bevel M214.146 designed for transferring and checking angles in metalworking, joinery and general workshop use. 250 mm slotted blade for secure clamping Black anodised aluminium handle, robust grip Locking screw for repeatable angle transfer Compact 160 x 30 mm ergonomic handle Precise angle transfer with secure clamping The tool is built for dependable angle transfer: the slotted blade works in combination with the locking screw to lock settings without slippage, which improves repeatability when marking or setting up jigs. As an analogue instrument it provides a direct, tactile confirmation of the chosen angle and avoids the complexity of electronic systems, making it suitable for production benches where quick, repeatable adjustments reduce setup time. The robust construction supports everyday workshop stresses while keeping handling straightforward. Light, ergonomic design for frequent handling With a compact 160 x 30 mm handle and a blade length of 250 mm, this gauge balances reach and control. The black anodised aluminium handle gives a firm, non-reflective surface that resists wear and offers a natural grip, while the overall lightweight nature keeps fatigue low during repeated use. These attributes make the instrument practical for joiners, metalworkers and maintenance teams who need fast, one-handed alignment and marking without sacrificing comfort or durability. Simple mechanics that save time on the job The slotted blade profile allows the clamp to engage directly through the blade, which simplifies securing and fine-tuning the angle. The analogue format means no batteries and virtually no downtime for instrument readiness; the straightforward locking mechanism reduces adjustment steps and helps maintain consistent outcomes across multiple parts. For workshops aiming to streamline routine setups, this gauge reduces process complexity while preserving reliable performance. Trusted supply and added confidence from Metav IndustryLine Backed by Metav’s positioning as a precision partner, the instrument comes from a supplier focused on accessible quality and dependable logistics for European workshops. The combination of practical design, durable finish and proven workshop utility makes it a pragmatic choice for teams that value consistency and straightforward maintenance. Metav IndustryLine products are part of a broad portfolio intended to lower procurement friction while keeping quality standards high. Contact Metav Werkzeuge for specific availability and application recommendations for the Metav IndustryLine sliding bevel (M214.146); email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance. Technical Data Article number: M214.146 GTIN: 4054469183282 ECLASS: 21170130 Facts Weight: 0.1 kg Blade dimensions: 250 x 30 x 1 mm Handle dimensions: 160 x 30 x 18 mm Special features Slotted blade (mit geschlitzter Klinge) Black anodised aluminium handle (Alugriff schwarz eloxiert) Locking screw (feststellschraube) Analogue design Category: Angle measuring devices FAQ What materials is this sliding bevel suitable for? The sliding bevel M214.146 from Metav IndustryLine is a hand tool for angle transfer and marking; it is material-agnostic and used across woodworking and metalworking tasks where precise angle setting is required. How is the blade secured once the angle is set? A locking screw secures the slotted blade; tightening the screw fixes the chosen angle for repeatable transfers and stable marking. Is the handle wear-resistant and comfortable for extended use? The handle is made from black anodised aluminium, providing a durable, non-reflective finish and a comfortable ergonomic profile for frequent handling. Does the product require calibration or special maintenance? The analogue sliding bevel does not require calibration like measuring instruments; routine inspection of the locking screw and cleaning of the blade is sufficient to maintain reliable performance. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Sliding Bevel Square With Slotted Stainless Blade, Dual-Sided Mm Scale, Wooden Handle - Metav IndustryLine
Take advantage of a 250 mm stainless steel blade, a solid wooden handle and a secure locking screw for reliable angle transfer in woodworking and light metalwork; order directly via Metav Werkzeuge or consult our specialists for application advice. M214.141 Sliding Bevel Gauge — 250 mm stainless blade, wooden handle (Metav IndustryLine) M214.141 is a sliding bevel gauge for transferring and setting angles in workshop and site applications, combining a rust‑resistant blade with a traditional wooden handle for comfortable handling. Slotted 250 mm stainless steel blade Double-sided millimetre scale Solid wooden handle with locking screw Consistent accuracy where it matters The sliding bevel delivers dependable angle transfer from full‑scale templates to workpieces, thanks to its slotted blade that allows precise alignment. The double-sided millimetre scale gives clear reference marks on both faces of the blade, making measurement and comparison straightforward in confined or awkward positions. Built for routine workshop use, this tool supports repeatable set‑ups that reduce rework and save production time. Secure clamping for stable setups A robust locking screw secures the blade at any chosen angle, preventing slippage during marking or scribing. The combination of a rigid blade profile and a positive clamp means adjustments stay fixed while cutting or drilling, improving process reliability. The gauge’s construction emphasises practicality: the stainless steel blade resists corrosion and maintains edge straightness, while the wooden handle offers a tactile grip for steady alignment. Lightweight, comfortable and ready for everyday use With an overall weight of about 0.2 kg, the instrument is lightweight enough for extended use yet substantial enough to feel stable in hand. The ergonomically proportioned wooden handle (180 x 25 x 19 mm) balances the 250 mm blade and facilitates one‑hand operation when transferring angles from jigs or profiles. This familiar form factor makes the tool instantly accessible to carpenters, joiners and general workshop staff who value speed and simplicity over complexity. Practical benefits for workshop efficiency The straightforward design reduces setup time: adjust the blade, lock the angle and mark directly—no electronics, no batteries, no calibration cycles. The analogue format is ideal for quick checks and is compatible with the routines of busy production and maintenance teams. The tool’s stainless blade and classic handle finish also make it suitable for mixed environments where occasional exposure to humidity or coolant is possible. Suitable applications and user value Suitable for woodworking, light metal layout and general workshop marking, the bevel is a useful complement to bench tools and hand‑held power tools. Its clear millimetre markings and stable locking mechanism help maintain line accuracy during repetitive tasks, supporting a smoother workflow and fewer corrective operations. The instrument is particularly valuable where simple, low‑maintenance precision is required without the overhead of digital calibration. For precise angle setting and a reliable, low‑maintenance solution from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for purchasing and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.141 GTIN: 4054469183299 Brand: Metav IndustryLine Type: Sliding bevel gauge Weight: 0.2 kg Facts Blade length: 250 mm Blade cross section: 25 x 1 mm Handle dimensions: 180 x 25 x 19 mm Scale: Millimetre markings, both sides Special features Slotted blade for flexible alignment Stainless (rust‑resistant) blade Double‑sided millimetre scale Wooden handle for ergonomic grip Locking screw for secure angle fixation Analog design for battery‑free operation FAQ What is the blade length of the sliding bevel? The M214.141 sliding bevel gauge features a 250 mm stainless steel blade, suited to common workshop layouts and template work. Is the blade corrosion resistant? Yes, the blade is made from stainless steel, providing enhanced resistance to rust in everyday workshop conditions. Can the gauge be used for both woodworking and light metalwork? The sliding bevel from Metav IndustryLine is suitable for woodworking and light metal layout tasks where a robust analogue tool for angle transfer is required. How is the angle secured once set? An integrated locking screw secures the blade at the chosen angle, ensuring stability during marking and scribing. Is the tool easy to handle for prolonged use? With a lightweight design (approx. 0.2 kg) and a shaped wooden handle, the gauge offers comfortable handling for extended marking operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250x500mm Angle Gauge 10–170° Adjustable Slide With Locking Screw, Matt Chrome - Metav IndustryLine
Benefit from a wide 10–170° measuring range, a length-adjustable rail with secure locking screw and a robust matt chrome-plated steel build for repeatable setup work; order the angle gauge directly via Metav Werkzeuge or contact our consultants for application advice. M214.163 Angle Gauge — 10–170° range, adjustable rail (Metav IndustryLine) The M214.163 Angle Gauge is a precision angle-measuring instrument for workshop set-ups and inspection tasks, combining a broad measurement span with a rail that can be adjusted in length for flexible fixturing and alignment. 10–170° measuring range Adjustable length rail for versatile setups Matt chrome-plated steel construction Locking screw for repeatable positioning Faster set-ups with reliable angle readings The instrument offers a broad 10–170° span presented on a clear scale with a scale division of 1°, enabling rapid angle checks across a wide range of applications. Thanks to the readable graduation and the sizeable plate of 250 x 500 mm, alignment tasks that previously required time-consuming transfer methods can be completed more quickly and with fewer intermediate steps. This efficiency reduces machine idle time and simplifies fixture preparation in both repair and production environments. Durable construction for workshop conditions Constructed from steel, completely matt chrome-plated, the gauge resists surface wear and glare while remaining easy to clean. The cross-section of 28 x 3.9 mm gives the rail inherent stiffness so that lateral bending is minimised during handling and clamping. At a weight of 0.9 kg, the device balances stability with manageable handling for one-person operation when positioning on workpieces or on a measuring table. Precise positioning and flexible mounting An integrated locking screw secures the adjustable rail at the required length for repeatable readings, eliminating micro-movements that can compromise repeatability. The length-adjustable rail broadens the instrument’s use from simple angle checks to applied set-ups where a tailored reach is necessary, such as aligning machine tables, checking fixture angles or verifying component chamfers. The instrument’s robust finish and locking mechanism contribute directly to reliable, reproducible results. For supply and tailored guidance on the Metav IndustryLine M214.163, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and delivery options Technical data Article number: M214.163 GTIN: 4054469106960 ECLASS: 21170304 Tariff code: 90178090 Numbers Measuring range: 10–170° Scale division: 1° Dimensions: 250 x 500 mm Cross-section: 28 x 3.9 mm Weight: 0.9 kg Special features Length-adjustable rail Locking screw for repeatable positioning Steel, matt chrome-plated finish Suitable for workshop alignment and inspection FAQ How wide is the measuring range and what resolution is available? The gauge measures from 10–170° with scale graduations of 1°; this provides a quick, reliable reference for most workshop alignment tasks using the M214.163 Angle Gauge from Metav IndustryLine. Can the rail be locked in place for repeat measurements? Yes, the adjustable rail is secured by a locking screw that fixes the chosen length and supports repeatable positioning across multiple parts. What makes this device suitable for workshop use? A matt chrome-plated steel construction and a stiff 28 x 3.9 mm cross-section provide abrasion resistance and reduced flexing, making the instrument robust enough for daily workshop handling. Is the gauge easy to handle and position on large parts? At 250 x 500 mm and a weight of 0.9 kg, the gauge combines a generous measuring face with manageable weight for positioning on medium-sized components and fixtures. Which applications benefit most from this angle gauge? The instrument is ideal for fixture alignment, machine table setup, inspection of chamfers and bevels, and any task requiring quick, repeatable angle checks in a production or maintenance setting. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25mm Circular Spirit Level 25 Min Angle Adjustment, Compact Design - Bayerische Maß-Industrie Arno Keller GmbH
Take advantage of a compact levelling solution that combines 25 mm outer diameter with a sensitivity of 25 arc minutes sensitivity for reliable alignment results; order directly via Metav Werkzeuge or consult our specialists for integration advice. Circular spirit level 25 mm (25 arc minutes) BMI A circular spirit level 25 mm (25 arc minutes) BMI is designed for fine alignment tasks in workshop and light metrology contexts, offering a compact format for precise horizontal levelling. 25 mm outer diameter 25 arc minutes sensitivity For precision levelling tasks High sensitivity for measurable alignment improvement The small-diameter circular vial delivers a clear, measurable response to tilt: 25 arc minutes corresponds to approximately 0.42°, which allows for fine adjustments during machine setup and fixture alignment. The compact 25 mm diameter makes the component suitable where space is restricted, while the calibratable bubble chamber supports repeatable orientation. Technical accuracy is expressed in angular units rather than subjective feel, so decisions about set-up and tolerance verification can be made on an objective basis, reducing rework and downtime. Practical benefits for workshop and inspection use Using a bull's-eye vial simplifies the levelling process for benches, jigs and instrument housings by showing multi-directional deviation at a glance. The instrument’s sensitivity is tuned for routine precision tasks rather than ultra-fine laboratory calibration, which means quicker adjustments and shorter set-up times in production and maintenance environments. The measurable sensitivity supports a rational approach to alignment and contributes to process reliability when combined with routine checks and documented set-up procedures. Clear identification and straightforward inventory handling Supplied individually (packaging unit 1), the component is easy to assign to tools or machines and to track in stores or on the shop floor. The item is listed as 4000857463NW, enabling straightforward stock control and reordering. Where further specification is required for retrofit or integration, the item’s basic angular sensitivity and diameter provide the essential parameters for compatibility checks with mounting collars or recesses. Documentation and part labelling assist traceability and quality assurance in serial processes. Contact Metav Werkzeuge for tailored advice on integrating the circular spirit level into existing fixturing and to request ordering information through Metav Werkzeuge; the team is available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 4000857463NW Label: Dosenlibelle 25mm 25 min BMI Product type: circular spirit level Facts Outer diameter: 25 mm Sensitivity: 25 arc minutes Packaging unit: 1 Special features Compact circular vial Bull's-eye spirit level format Single-item packaging FAQ What level of angular sensitivity does this vial provide? The circular spirit level offers 25 arc minutes of sensitivity, equivalent to roughly 0.42°, allowing for fine yet practical alignment in workshop settings. Can this component be fitted into existing fixtures or housings? Yes, the 25 mm outer diameter and circular format permit integration into compatible collars and recesses; verify the mounting bore to ensure correct seating of the vial. How is the product supplied and identified? The item is supplied individually (packaging unit 1) and can be ordered under article number 4000857463NW. Is this vial suitable for precision metrology tasks? The bull's-eye format is intended for practical precision checks and alignment; it supports reliable set-up procedures but is not a substitute for high-precision laboratory calibration instruments. Does the product include calibration or adjustment instructions? Basic adjustment guidance is typically provided; for detailed integration and calibration assistance, consult the Metav Werkzeuge team. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 mm Frame Level 0.3 mm/m, Special Cast Iron, Two Prismatic Bases, Protective Case - Metav IndustryLine
Take advantage of the grey cast-iron construction, 300 mm measuring length and 0.3 mm/m sensitivity for reliable alignment work; the instrument is supplied in a transport case and can be ordered via Metav Werkzeuge or discussed with our specialists for application advice. M215.174 Frame precision level – 300 mm, 0.3 mm/m (Metav IndustryLine) The M215.174 frame precision level is a 300 mm frame spirit level manufactured from grey cast iron, offering 0.3 mm per metre sensitivity and prism-equipped seating for secure positioning on profiled surfaces. 300 mm measuring length Sensitivity 0.3 mm/m Special cast-iron construction Prismatic longitudinal and transverse vials Dependable precision for alignment and setup The frame spirit level delivers a clear measurement basis where small angular deviations matter. With a sensitivity of 0.3 mm/m, a tilt of 0.3 millimetres across one metre is indicated on the vial, which helps convert optical reading into an immediate, comparable value for machine set-up and surveying tasks. The prismatic bases ensure stable contact on cylindrical or irregular profiles, making the tool suitable for checking spindle alignment, machine beds and mounted assemblies. This translates into fewer set-up iterations and more reproducible alignment results in everyday workshop routines. Robust build that reduces measurement uncertainty Constructed from grey cast iron, painted, the frame offers mass and rigidity that damp vibration and resist distortion. The machined surfaces and prism seats provide a stable reference line, while the solid construction yields consistent performance under normal workshop handling. Where repeated checks over a workshift are required, the combination of weight and profile stability reduces the influence of accidental movement and improves repeatability compared with lighter hand levels. The instrument is therefore a practical choice where durability and repeatable reference geometry are needed. Practical features to increase efficiency on the shop floor Equipped with longitudinal and transverse vials, the level supports quick checks in two axes without reorienting the instrument, which speeds up alignment tasks for rectangular housings or machine frames. The prismatic seating assists in positioning on shafts or rounded fixtures, so measurements can be taken directly rather than relying on improvised supports. Supplied in a transport case, the unit is protected during transit and storage, preserving calibration and mechanical condition for immediate use on arrival. Integration into quality routines and working practice As a straightforward optical alignment instrument, the frame level complements dial indicators and electronic inclinometers by offering a low-maintenance, visual reference that is easy to interpret and document. The clear 0.3 mm/m specification provides an objective acceptance criterion for routine checks and helps standardise inspection steps across different operators. For workshops seeking a robust reference instrument that fits into established metrology workflows, this frame spirit level supports consistent set-up, faster diagnostic checks and a stable baseline for corrective adjustments. Contact Metav Werkzeuge for tailored advice on using the M215.174 frame precision level and to arrange supply from our Emmerich warehouse Technical Data Article number: M215.174 GTIN: 4054469109923 eClass: 21160113 ETIM: EC000145 Customs tariff number: 90153090 Facts Measuring length: 300 mm Sensitivity/readability: 0.3 mm/m Category: Angle measuring device Special features Material: Grey cast iron, painted Prismatic bases: two Vials: longitudinal and transverse Supplied in transport case FAQ How precise is the frame level for alignment work? The M215.174 frame precision level from Metav IndustryLine has a sensitivity of 0.3 mm per metre, which gives a clear, comparable optical indication for most machine alignment and workshop set-up tasks. Can the instrument be used on cylindrical surfaces? Yes. The level features prismatic bases that provide secure seating on shafts and profiled components, enabling direct measurements without additional supports. Is the tool protected for transport and storage? The frame level is supplied in a transport case to protect the instrument during transit and storage and to preserve its reference surfaces. What materials is the frame made from and why does that matter? The frame is manufactured from grey cast iron, painted, which gives mass and rigidity to reduce vibration and improve repeatability compared with lighter alternatives. Is the reading suitable for machine bed and spindle alignment? The optical sensitivity and dual-axis vials make the instrument well suited to machine-bed and spindle alignment checks, providing an immediate visual reference for small angular deviations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 mm Frame Level With Two Prismatic Vials, 0.1 mm/m, Special Cast Iron, Supplied In Case - Metav IndustryLine
Take advantage of the combination of 0.1 mm per metre sensitivity, a 300 mm measuring base and a robust grey cast iron frame for precise, repeatable alignment in machine setup and fixture work; order the Precision Frame Level directly via Metav Werkzeuge or consult the advisers if further specification is required. Precision Frame Level M215.154 — 300 mm, 0.1 mm/m, prismatic bases (Metav IndustryLine) The Precision Frame Level M215.154 is a 300 mm frame level designed for accurate alignment of machine beds, fixtures and assemblies, offering 0.1 mm per metre sensitivity and two prismatic bases for stable seating on profiles and cylindrical surfaces 300 mm measuring base 0.1 mm per metre sensitivity Grey cast iron, painted Two prismatic bases and spirit vials Accuracy and measurement reliability for machine alignment The core advantage of this frame instrument is its measuring sensitivity of 0.1 mm per metre, which permits reliable detection of small inclinations across facility-scale alignments. The instrument uses longitudinal and transverse spirit vials integrated into a rigid frame design, converting tiny angular deviations into easily read deflections. For workshop engineers and quality technicians this level of resolution supports quick decision-making during machine bed levelling and alignment tasks, reducing rework and improving throughput. The construction and vial geometry are chosen to provide repeatable readings under normal workshop conditions. Robust construction that suits everyday workshop use Built from grey cast iron and supplied with a painted finish, the level is engineered for mechanical stability and thermal mass that dampens transient disturbances. The frame construction gives the tool a low centre of gravity and a stable platform for measurements across straight edges and planar surfaces. Two prismatic bases ensure secure seating on round or profiled components, enabling straight-forward use on shafts, rollers and bearing housings. This combination of materials and geometry reduces flexing and preserves the alignment reference in routine production environments. Practical handling and where this instrument adds value With a 300 mm measuring base, the instrument sits in the standard range for shop-floor alignment tasks: long enough to bridge reference points yet compact enough for one-person handling on typical machine parts. The integrated vials permit both longitudinal and cross checks without repositioning the tool, streamlining inspection cycles and lowering setup times. Classified for angle and alignment work, the unit suits maintenance teams, toolroom staff and production engineers who require a robust, no-nonsense instrument for repeatable levelling tasks. The simple optical readout requires no electronics, making it inherently low-maintenance and immediately usable across shift changes. For specification advice or to secure a delivery from Metav Werkzeuge, contact Metav Werkzeuge directly and request the M215.154 from the Metav IndustryLine range to ensure the correct alignment tool for the application Technical data Article number: M215.154 GTIN: 4054469109855 eClass: 21160113 ETIM: EC000145 Customs tariff number: 90153090 Facts Measuring length: 300 mm Sensitivity / reading: 0.1 mm per metre (0.1 mm/m) Overall dimensions: 300 x 300 mm Special features Two prismatic bases for cylindrical surfaces Longitudinal and transverse spirit vials Painted grey cast iron frame Frame design for stable alignment Category: Angle measuring instrument FAQ How precise is the instrument for machine alignment? The M215.154 provides a sensitivity of 0.1 mm per metre, enabling detection of small inclination changes suitable for workshop levelling and fixture alignment tasks. Can the level be used on cylindrical parts like shafts or rollers? Yes, the two prismatic bases on the frame level are designed to seat securely on round and profiled components for reliable readings on shafts and rollers. What maintenance is required to keep the instrument accurate? Routine care consists of keeping the instrument clean, protecting the vials from impact and storing it dry; the painted grey cast iron frame provides robust service life with minimal upkeep. Is the frame suitable for use in a production environment? The rigid frame design and the combination of prismatic bases and transverse vials make the tool well suited to production and maintenance settings where repeatable alignment checks are required. Which applications are typical for this frame level? Typical uses include machine bed levelling, fixture alignment, assembly jig checks and reference surface verification in metalworking and mechanical maintenance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 mm Frame Spirit Level, 0.02 mm/m Accuracy, Cast Iron Body, Prismatic Bases, Supplied in Case - Metav IndustryLine
Benefit from the combination of 0.02 mm/m accuracy, a compact 300 mm framed design and a painted grey cast iron body for stable, repeatable alignment work; order the frame precision level directly via Metav Werkzeuge or consult our specialists for application guidance. Frame Precision Level M215.114 — framed spirit level, 300 mm, 0.02 mm/m (Metav IndustryLine) Frame Precision Level M215.114 is a robust framed spirit level designed for precise alignment and angle checking in machine and metal workshops, offering a compact footprint and industrial-grade stability. High accuracy 0.02 mm/m 300 mm compact frame Painted grey cast iron body Supplied in protective transport case Accurate alignment that reduces setup time The framed spirit level delivers a guaranteed reading accuracy of 0.02 mm/m, which translates into markedly smaller alignment errors over long setups. This level of precision reduces rework and shortens machine setup times, because adjustments become verifiable at the micrometric scale rather than by feel alone. The calibrated indication lets engineers and fitters rely on objective measurements for planing, shimming and fixture alignment, improving throughput and reproducibility in daily workshop routines. A stable frame for repeatable results Constructed from painted grey cast iron, the instrument combines mass and rigidity to resist vibration and distortion during use. The framed geometry keeps the measuring surfaces parallel and stable, while prismatic support surfaces aid secure seating on shafts, rails or reference plates. Longitudinal and transverse spirit vials are integrated to permit multi‑axis alignment checks without repositioning, improving ergonomics and reducing measurement cycles. The result is consistent, repeatable levelling across batches and across shifts. Compact format that fits the workshop workflow With a nominal size of 300 x 300 mm, the tool is compact enough for bench or machine‑bed work yet large enough to span typical mounting faces encountered in toolrooms and maintenance. The framed construction gives clear sightlines for the vials and simplifies handling when aligning housings or checking jig faces. Delivery in a protective transport case preserves calibration and prevents damage in daily handling and storage, helping to maintain measurement certainty over time. Built for practical use and integration The design focuses on straightforward, reliable operation rather than electronic complexity: a solution that integrates well into standard workshop processes where visual spirit readings and mechanical seating are preferred. The compact framed body is well suited to alignment tasks on machine tools, assemblies and fixtures where a rigid reference and fine reading capability are required. The instrument supports procedural quality checks that feed into existing QA workflows without the need for additional instrumentation. Contact Metav Werkzeuge for tailored advice and to secure delivery of the Metav IndustryLine frame precision level M215.114 from our Emmerich stock Technical data Article number: M215.114 GTIN: 4054469109794 eClass: 21160113 ETIM: EC000145 Tariff number: 90153090 Core technical data Nominal length: 300 mm Dimensions: 300 x 300 mm Reading accuracy: 0.02 mm/m Special features Material: painted grey cast iron Two prismatic support surfaces Longitudinal and transverse spirit vials Supplied in protective transport case Category: Angle measuring instruments FAQ What level of accuracy can be expected from this framed spirit level? The Metav IndustryLine framed spirit level M215.114 provides a reading accuracy of 0.02 mm/m, allowing fine alignment tolerances to be achieved and verified for machine setup and fixture alignment. Is the instrument suitable for use on cylindrical surfaces or rails? Yes. The prismatic support surfaces on the frame permit stable seating on cylindrical components and rails, so the Metav IndustryLine M215.114 is well suited to shaft, rail and bearing‑seat inspections. How is the instrument protected during transport and storage? The tool is supplied in a protective transport case to maintain calibration and prevent damage between uses, ensuring consistent performance when returned to the workshop. Can this level be used for multi‑axis alignment checks? Yes. Integrated longitudinal and transverse spirit vials enable multi‑axis levelling without repeated repositioning, which speeds up alignment workflows and improves reproducibility. Is the frame material corrosion resistant for workshop environments? The body is made of painted grey cast iron, providing robust mechanical stability and a protective finish suitable for typical industrial and maintenance environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 mm Precision Level, 0.3 mm/m, Prismatic Base, Special Cast Iron, Adjustable Spirit Vials, Supplied in Case - Metav IndustryLine
Combining 300 mm measuring length with a sensitivity of 0.3 mm/m and a special grey cast-iron body, this alignment level delivers stable, repeatable readings for workshop and machine-setup tasks; its prism base and easily adjustable vial mean quick alignment checks with minimal downtime. Order the unit directly via Metav Werkzeuge or contact our consultants for application advice. M215.139 Precision Spirit Level, 300 mm – Cast-iron, 0.3 mm/m (Metav IndustryLine) A M215.139 precision spirit level designed for alignment and setup work in machine shops and inspection benches, compliant with DIN 877 and equipped with a prismatic base for edge and shaft measurements. 300 mm length, 0.3 mm/m accuracy Special grey cast-iron construction Prism base for edge and shaft checks Easily adjustable vial Accurate alignment that reduces rework The solid construction and clear sensitivity of 0.3 mm/m make this instrument a reliable choice where small angular deviations cause production issues. The 300 mm span provides a practical balance between reach and stiffness, so straightness and tilt checks remain reproducible across typical machine-bed and fixture applications. Built to DIN 877 standards, the level supports faster setup cycles and fewer adjustment iterations, improving throughput in repetitive alignment tasks. Robust design for workshop conditions Made from special grey cast iron, the body offers damping and dimensional stability that resist everyday knocks and temperature fluctuations common in workshops. The prism base allows measurements along edges and shafts without repositioning, which streamlines checks on rails, housings and cylindrical components. The vial is easily adjustable, enabling straightforward re-zeroing after transport or minor impacts, so measurement confidence is restored quickly without specialised tools. Clear readings and practical handling The instrument’s vial geometry and prismatic seating improve line-of-sight and contact with test surfaces, reducing interpretation errors during inspection. As a compact precision tool, it integrates well into quality-control routines and on-machine verification steps, giving a tangible efficiency gain where rapid, repeatable assessments are required. The level is suitable for angle and alignment tasks within general metalworking and mechanical assembly workflows, supporting both routine maintenance and initial machine installation. For dependable alignment in everyday workshop use, request the Metav IndustryLine M215.139 from Metav Werkzeuge—our advisors in Emmerich can recommend the best configuration and delivery options to match the application. Technical data Article number: M215.139 GTIN: 4054469182667 Manufacturer: Metav IndustryLine Numbers / Core technical data Measuring length: 300 mm Sensitivity: 0.3 mm/m Standard: DIN 877 Special features / Versions Material: grey cast iron Prism base for edge and shaft measurements Easily adjustable vial Category: angle measuring instrument FAQ What accuracy can be expected from this spirit level? The M215.139 offers a sensitivity of 0.3 mm per metre, making it suitable for alignment tasks where that resolution meets workshop and machine-setup requirements. Is the base suitable for checking shafts and edges? Yes, the prismatic base on the M215.139 is designed to sit reliably on cylindrical and edge surfaces, facilitating axial and edge alignment without additional fixtures. Which standard does the instrument comply with? The unit is manufactured to DIN 877, ensuring conformance with established workshop-level measurement practices. Can the vial be re-adjusted on site? The vial is easily adjustable, allowing simple re-zeroing after transport or minor knocks without the need for specialist equipment. Who supplies and supports this precision level? The M215.139 is offered under the Metav IndustryLine and is available through Metav Werkzeuge for advice and delivery. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 mm Precision Spirit Level 0.1 mm/m Prism Base, Special Grey Cast Iron, Adjustable, Supplied in Case - Metav IndustryLine
Take advantage of a robust grey cast iron construction and 0.1 mm/m accuracy to keep machine alignments consistent and measurable; the prism base and simple adjustment mechanism allow stable placement and quick fine tuning. Order the precision level directly via Metav Werkzeuge or ask the consultants for application advice. Metav IndustryLine Precision Level M215.136 — 300 mm, 0.1 mm/m (DIN 877) The Metav IndustryLine Precision Level M215.136 is a machinist's spirit level designed for alignment and flatness checks in machine assembly and workshop inspection. 300 mm length for workshop versatility 0.1 mm/m accuracy to DIN 877 Prismatic base for secure positioning Easily adjustable vials; robust cast-iron body Precision that streamlines inspection and set-up The M215.136 delivers a reliable, measurable reference for alignment tasks thanks to its 0.1 mm/m graduation, which meets the expectations set by DIN 877. Such resolution provides a clear, quantifiable result when checking machine beds, guideways or assembly fixtures, reducing iteration and setup time. The tool functions as a stable reference that replaces repeated trial adjustments; by fixing the datum once, subsequent alignments become faster and less error-prone. This focus on measurable accuracy supports efficient workflows and consistent quality control. Stable construction for repeatable measurements Built from grey cast iron, the level combines mass and rigidity to resist torsion and vibration during measurement. The prismatic base gives a secure seating on cylindrical or profiled surfaces, improving contact and preventing slippage during critical checks. The overall design prioritises repeatability: a dense body and considered geometry minimise deflection, so readings remain comparable across multiple points and over longer inspection cycles. The robust construction also supports longevity in a workshop environment, lowering the need for frequent replacement. Practical handling and straightforward fine tuning Adjustment is straightforward due to the easily adjustable vial mechanism, allowing small corrections on site without specialist tools. The instrument’s 300 mm length balances reach and manoeuvrability in bench and machine contexts, offering enough span for most assembly and alignment tasks while remaining usable by one technician. Supplied in a transport case, the level is protected during storage and transit, ensuring the measuring surfaces and vial alignment are preserved between uses. Clear, tactile features make routine checks quick and reduce the chance of operator-induced variation. Why this level supports professional work standards The level is intended for workshops and production settings where consistent geometric references are essential. Compliance with DIN 877 underlines its suitability for industrial use, and the combination of a prismatic seating and cast-iron mass addresses common practical challenges such as measuring on shafts or mounted components. The instrument is positioned as a precision workshop tool that prioritises measurable outcomes and robustness, helping teams maintain process reliability with an instrument that is straightforward to use and maintain. For dependable alignment and long-term reliability choose the Metav IndustryLine precision level M215.136—contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich. Technical Data Article number: M215.136 GTIN: 4054469182636 Length: 300 mm Accuracy: 0.1 mm/m Standard: DIN 877 Material: Grey cast iron Prismatic base: yes Adjustment: easily adjustable vial Delivery: supplied in transport case Facts Length: 300 mm Reading: 0.1 mm/m GTIN: 4054469182636 Special features Prismatic base for secure seating on profiles Complies with DIN 877 Robust grey cast-iron body Easily adjustable vial mechanism Supplied in transport case Category: Angle measuring device (winkelmessgeräte) FAQ What level of accuracy does the instrument provide? The precision level offers a graduation of 0.1 mm/m, making it suitable for workshop alignment and flatness checks where DIN 877 compliance is required. Can the level be used on round shafts or profiled surfaces? Yes. The prismatic base ensures secure positioning on cylindrical and profiled components, improving contact and measurement stability. Is the vial adjustable if it drifts over time? The M215.136 features an easily adjustable vial mechanism so fine tuning can be carried out on site without specialised tools. How is the level protected during transport and storage? The instrument is supplied in a transport case to protect the measuring surfaces and vial alignment during handling and storage. Is this instrument suitable for machine-bed alignment? Yes. Its 0.1 mm/m resolution and rigid grey cast-iron construction make it appropriate for setting and verifying machine beds and guideways. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 mm Precision Spirit Level 0.3 mm/m Prismatic Base, Gray Cast Iron, Supplied in Case - Metav IndustryLine
Take advantage of a compact, workshop-ready instrument that combines precision and robust construction: the 300 mm length and 0.3 mm/m reading make this spirit level ideal where reproducible levelling and angular checks are required. Order the item directly via Metav Werkzeuge or consult our specialists for application advice. Precision spirit level M215.164 — 300 mm, 0.3 mm/m, prismatic base (Metav IndustryLine) The Precision spirit level M215.164 is a 300 mm machinist's level designed for alignment and angle checks in metalworking and assembly environments, offering a clear 0.3 mm/m indication for reliable levelling on linear and angular reference surfaces. 300 mm length for workshop alignment 0.3 mm/m reading for reliable levelling Special grey cast iron body for stability Prismatic base for secure edge placement Precise readings for consistent alignment The heart of this instrument is the 0.3 mm/m reading, a specification that supports dependable levelling across short-to-medium spans. The clear vial indication translates small angular deviations into easy-to-read linear deflection, which speeds up setup and reduces iteration on jigs and mounts. With a 300 mm beam length the level balances reach and handling: it is long enough for routine alignment tasks yet compact enough for confined workbenches. This balance of size and resolution supports efficient workflows in production and maintenance, helping to avoid rework and downtime through faster, verifiable set-ups. Stable construction for repeatable results Built from grey cast iron, the body provides inherent damping against vibration and thermal inertia that benefits repeatability during successive measurements. The prismatic base secures the instrument on round and flat edges, improving contact stability and reducing the chance of slippage when checking shafts, machine saddles or datum rails. These material and design choices yield repeatable results by keeping the reference plane true during measurement, so each check can be trusted as a reliable reference for adjustment or documentation. Designed for workshop integration and clarity This level is conceived for everyday use in machine shops and installation work: the combination of robust construction and a prismatic seating simplifies hands-on tasks such as checking headstocks, setting up fixtures, or verifying alignment between plane surfaces. The device’s readable indication and durable build mean fewer interruptions for recalibration or replacement. For buyers seeking traceable calibration, please check the product sheet or consult Metav Werkzeuge for available calibration services and certificates. For precision alignment tasks choose Metav IndustryLine quality — contact Metav Werkzeuge to discuss suitability for specific applications and to reserve the M215.164 spirit level for your workshop, Metav Werkzeuge GmbH, Parkring 45, Emmerich Technical data Article number: M215.164 GTIN: 4054469109886 eCl@ss: 21160113 ETIM: EC000145 Customs tariff number: 90153090 Core specifications Length: 300 mm Reading / accuracy: 0.3 mm/m Features & materials Material: grey cast iron (special) Prismatic base / prismatic surface Intended use: alignment and angle checks Category: angle measuring devices FAQ What accuracy can be expected from this level? The instrument provides a 0.3 mm/m reading, which offers a clear linear indication suitable for workshop levelling and angle checks; this specification supports reproducible adjustments on jigs and machine components. Which materials is the body made from? The body is manufactured from grey cast iron, chosen for its dimensional stability and vibration damping, which contributes to consistent measurement results. Is the prismatic base suitable for shafts and round surfaces? Yes, the prismatic base is designed to seat securely on edges and cylindrical surfaces, improving contact stability when checking alignment on shafts or round fixtures. Can this spirit level be used in a production environment? The combination of a 300 mm beam and 0.3 mm/m reading makes the level well suited to routine production checks and setup tasks where repeatability and robustness are important. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm 0–180° Digital Angle Gauge Rotatable Display, ON/OFF ZERO HOLD Functions - Metav IndustryLine
Take advantage of precise angle measurement, the rotatable digital readout and a 300 mm blade for fast, reliable inspection tasks; order the instrument directly via Metav Werkzeuge or consult the Metav team for application advice. Digital bevel protractor M214.143 — digital angle gauge with rotatable readout and 0–180° range Digital bevel protractor M214.143 provides fast, repeatable angle measurement for workshop and inspection use across machining and fabrication applications. Rotatable digital readout for flexible viewing Measurement range 0–180° for full-angle checks Resolution 0.1° for clear, reproducible readings Slim 27.2 x 1.2 mm profile for tight spaces Reliable measurement that speeds up inspection cycles The unit delivers accurate angular readings across a full 0–180° range, with a display resolution of 0.1° that supports routine quality checks and setting operations. The digital display reduces reading errors compared with analogue instruments and the fast ON/OFF and ZERO functions help standardise repeat measurements. For production environments where throughput and reproducibility matter, this instrument provides a clear performance advantage by cutting measurement time and minimising interpretation mistakes. Designed for practical handling and clear results Ergonomics and visibility were prioritised: the rotatable display allows the readout to be turned to the most convenient viewing angle, while the HOLD/REV function secures a stable value for transfer to documentation or machine setup. The instrument’s blade length of 300 mm and the 27.2 x 1.2 mm profile give sufficient reach for medium-sized workpieces yet remain compact enough for handheld use. At approximately 0.5 kg, the device balances robustness with portability, making it suitable for both bench inspection and shop floor set-ups. Robust features for everyday workshop use Controls are straightforward — ON/OFF, ZERO and HOLD/REV — and the solid construction supports repeatable contact during frequent use. The instrument is classified as an angle measuring device appropriate for machining, welding fixture checks and general fabrication tasks where quick verification of bevels, mitres and clamped components is required. The clear digital interface and mechanical geometry combine to reduce operator influence on results, improving conformity across batches without complex training. For precise angle control in production environments, contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich — Metav’s specialists can confirm suitability for specific applications and arrange supply of the M214.143 instrument. Technical data Article number: M214.143 GTIN: 4054469106830 Measurement range: 0–180° Length: 300 mm Weight: 0.5 kg Facts Resolution: 0.1° Cross-section: 27.2 x 1.2 mm Customs tariff number: 90178090 Special features Digital display with ON/OFF, ZERO, HOLD/REV Rotatable readout for flexible viewing Category: Angle measuring device (digital bevel protractor) Slim profile for access in confined spaces FAQ How precise is the instrument for routine inspection? The M214.143 from Metav IndustryLine offers a 0.1° resolution, providing reliable precision for standard workshop and inspection tasks where clear, repeatable angle readings are required. Can the readout be repositioned for difficult viewing angles? Yes, the device includes a rotatable display, allowing the digital readout to be turned to the most suitable angle for the operator or documentation process. Which controls are provided for measurement handling? The unit features ON/OFF, ZERO and HOLD/REV controls to zero the instrument, capture readings and reverse the display orientation as needed during measurement and transfer tasks. Is the instrument suitable for setting up machining operations? The 300 mm blade and digital readout make the instrument well suited for machine set-up and fixture checking; the M214.143 supports quick verifications and consistent angle transfer between inspection and production. What materials and environments is the device intended for? Designed as a general-purpose angle gauge for workshops, the instrument is intended for fabrication, machining and inspection environments where digital angle measurement and easy readability are priorities. Hersteller: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm 360° Angle Measuring Device With Magnifier, Fine Adjustment, Three-Point Support - Metav IndustryLine
Reliable workshop and inspection angle control is achieved through the combination of a 360° scale, a 300 mm guide rail and parallax-free reading, delivering reproducible setups and faster alignment. The integrated magnifier and fine adjustment support accurate dial reading and micro‑positioning. Order the TOP angle measuring instrument directly via Metav Werkzeuge or ask our consultants if required. TOP Angle Measuring Instrument M214.093.T — analogue bevel protractor with 360° scale and 300 mm rail by Metav IndustryLine The TOP Angle Measuring Instrument is an analogue bevel protractor designed for workshop and inspection tasks, offering a full-circle 360° dial, a sturdy 300 mm guide rail and precise fine adjustment for repeatable angle setting. 360° scale for full-angle measurement 300 mm hardened guide rail Parallax-free reading with magnifier Fine adjustment for micro-alignment Faster and more repeatable angle set-ups for production The combination of a 360° scale and a robust 300 mm rail enables quick orientation and repeated transfer of angles across jigs and fixtures. The instrument provides a reading step of 1/12° (≈5') and an application accuracy of ±10 arcminutes, figures that support routine inspection and set-up work without frequent recalibration. The compact mass (0.6 kg) helps keep handling steady while minimising operator fatigue during repeated measurements, so production cycles remain efficient and predictable. Clear visual control and micro‑adjustment to reduce error A magnifier over the dial and a parallax-free layout ensure the vernier and pointer can be read reliably even under workshop lighting. The integrated fine adjustment mechanism permits precise micro‑alignment once the coarse angle has been set, reducing overshoot and the need for repeated repositioning. These features lower process variability and make the instrument suitable for tasks where visible clarity and incremental alignment determine part quality. Durable guidance and protected delivery for everyday use The guide rail profile (cross-section 16×2.5 mm) and solid construction are designed for routine workshop handling and stable contact with measuring faces, supporting repeatable results on assembly and inspection benches. The instrument is supplied in a transport case for secure storage and shipment, which simplifies handling between the storage shelf and the work area and protects the device during transfer. The overall design balances precision functionality with the robustness expected on the shop floor. Contact Metav Werkzeuge for application advice or to request the TOP Angle Measuring Instrument from the Metav IndustryLine range; assistance is available from our Emmerich team for specification and delivery details Technical Data Article number: M214.093.T GTIN: 4054469106540 Category: Angle measuring instruments Weight: 0.6 kg Facts Measurement range: 4×90° Reading: 1/12° (approx. 5 arcminutes) Accuracy: ±10 arcminutes Rail length: 300 mm Cross-section: 16×2.5 mm Special features Analogue dial instrument Parallax-free reading Integrated magnifier Fine adjustment for micro-alignment Delivered in transport case FAQ What measurement accuracy can be expected from this instrument? The TOP Angle Measuring Instrument achieves an application accuracy of ±10 arcminutes, with a readable increment of 1/12° (approx. 5'), suitable for standard workshop inspection tasks. Is the instrument suitable for repeated shop-floor use? Yes. The 300 mm guide rail, robust cross-section and analogue construction make the instrument appropriate for repeated alignment and inspection operations in a production environment. Does the delivery include protective packaging? The instrument is supplied in a transport case to protect the bevel protractor during storage and shipment. How does the fine adjustment improve results? Fine adjustment permits micro‑alignment after coarse setting, reducing overshoot and repeat measurements, which improves reproducibility on fixtures and jigs. Can the dial be read easily under typical workshop lighting? Yes. The integrated magnifier and parallax-free arrangement improve visibility and reduce reading errors in standard workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Combination Square With Spirit Level, Mm Scale - Metav IndustryLine
Take advantage of the combination of cost‑effective durability, clear millimetre graduation and an integrated spirit level for precise angle work and fast alignment on the job. Order the combination square directly via Metav Werkzeuge or ask our consultants if needed. Combination Square M214.072 — 300 mm stainless steel rail with spirit level (Metav IndustryLine) The Combination Square M214.072 is a compact angle measuring tool with an integrated spirit level and double‑sided millimetre scale, designed for precise alignment and layout tasks in workshops and on site 300 mm stainless steel rail Double-sided millimetre scale Integrated spirit level for quick levelling Suitable for workshop and site use Precise, repeatable angle measurement for production work The robust design centres on a 300 mm stainless steel rail with double‑sided millimetre graduation, delivering a clear, traceable reference for layout and angle checks. The hardened rail resists wear and ensures repeatable measurements over time; measurements remain comparable between shifts and setups, reducing rework. Thanks to the visible scale on both faces, alignment and transfer tasks proceed without repeated repositioning, saving machine time and improving throughput. Fast levelling and reliable alignment without guesswork The built‑in spirit level enables immediate horizontal or vertical checks while the rail serves as the measuring reference, combining two steps into one. For rapid 90° and 45° verifications, the angle tool offers a solid datum that removes the need for auxiliary aids, improving workflow efficiency. Clear graduations and the level vial’s crisp bubble make the process intuitive, shortening set‑up times and supporting consistent fitting and assembly procedures. Robust materials and handling tailored to industrial use Manufactured with a stainless steel rail, the tool resists corrosion in workshop environments and retains its straightness under regular handling. At approximately 1.5 kg, the construction balances stability and manoeuvrability: the mass helps maintain contact and reduces wobble during measurement, while the overall form remains suitable for single‑hand operation where required. The combination of sturdy materials and precise marking supports longevity as a shop‑floor reference. Practical application and integration into everyday workflows Ideal for layout, fixture checking and assembly control, this combination square performs well across metalworking, joinery and general engineering tasks. The clear mm scale and integrated level reduce the need for separate instruments, simplifying toolkits and speeding up inspection loops. If further clarification on compatibility with specific jigs or fixtures is required, Metav’s technical advisors are available to provide additional specifications and recommendations so the tool integrates seamlessly into existing processes. Choose the Metav IndustryLine M214.072 for dependable angle control and faster set‑ups — contact Metav Werkzeuge for expert advice and secure supply from Emmerich. Technical data Article number: M214.072 GTIN: 4054469146324 Manufacturer: Metav IndustryLine Tariff number: 90178090 Facts Measuring range: 0–300 mm Weight: 1.5 kg Material: stainless steel rail ECLASS: 21160113 ETIM: EC000145 Special features Rail with millimetre graduation on both sides Integrated spirit level for levelling and alignment Suitable for workshop and site applications Category: angle measuring device FAQ What is the measuring length and scale resolution of this tool? The Combination Square M214.072 provides a measuring range of 0–300 mm with a clear millimetre graduation printed on both faces of the rail. Is the M214.072 suitable for use in metalworking environments? Yes. The stainless steel rail and robust construction make the M214.072 suitable for workshop use, including general metalworking and assembly tasks. Does the tool include a spirit level and can it check both 90° and 45° angles? The integrated spirit level permits quick horizontal and vertical levelling; the tool’s geometry supports fast 90° checks and typical 45° verifications used in layout work. How heavy is the combination square and is it easy to handle on site? Weighing approximately 1.5 kg, the tool offers a balance of stability and portability that suits both bench work and on‑site measurements. Can the M214.072 be used as a transfer tool between setups? Yes. The double‑sided mm scale and rigid rail allow reliable transfer of dimensions and references between fixtures; the tool is intended as a durable shop‑floor reference. Hersteller: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Angle Gauge 0–180° Readout 0.05°, Reversible Display, ON/OFF ZERO HOLD, mm Scale - Metav IndustryLine
A data inconsistency has been identified that prevents the generation of a reliable product description. The provided item label lists a measurement range of 0–180°, whereas the technical enrichment specifies a measurement range of 0–360°; these two values contradict each other for a core functional parameter. Because the measurement range is fundamental to the device’s purpose and to correct category placement, it is not possible to produce an accurate, trustworthy specification sheet, benefits analysis or purchasing recommendation from the existing dataset. Please supply a corrected and consistent specification for the angular range (confirm whether the instrument is 0–180° or 0–360°) and, if available, any supporting technical documentation so that a complete product text can be prepared. Once the measurement range is clarified, a full, professional description conforming to the required standards will be provided.
300mm Precision Spirit Level 0.02mm/m, Prismatic Base, Special Grey Cast Iron, DIN 877, Packaged Case - Metav IndustryLine
Combine DIN 877 conformity with a fine 0.02 mm/m graduation and an easily adjustable prismatic base to ensure repeatable alignment across fixtures and machine beds; order the M215.133 directly via Metav Werkzeuge or consult our specialists for integration advice. M215.133 Precision spirit level, 300 mm – 0.02 mm/m (Metav IndustryLine) The M215.133 is a workshop-grade precision spirit level for alignment and set-up tasks, combining a prismatic seating face with DIN 877 accuracy for machine, tool and assembly applications 0.02 mm/m accuracy according to DIN 877 Prismatic base for secure seating on profiles Grey cast iron construction for thermal stability Easily adjustable vial for quick calibration Consistent alignment for machine beds and assemblies Precision alignment is critical where micron-level inclination affects part quality. The 0.02 mm/m specification indicates the level alters by just 0.02 millimetres over one metre, a tolerance that supports fine machine levelling and reference work. Compliance with DIN 877 gives a recognised benchmark for repeatable measurement, so calibration cycles and acceptance tests are straightforward. For production environments this reduces setup time and rejects caused by misalignment, delivering a measurable improvement in process reliability. Stable construction and secure seating on profiles Built from grey cast iron, the tool offers inherent mass and thermal stability that reduces sensitivity to temperature shifts during routine use. The prismatic base provides a reliable seating surface on cylindrical or angular workpieces, improving contact and reducing rocking when placing the instrument on shafts, rails or profiled components. This construction translates into repeatable readings and fewer re-measurements, which supports efficient workshop workflows and conservative quality control strategies. Rapid on-site adjustment and practical workshop handling The adjustable vial mechanism simplifies in-field correction: the vial can be fine-tuned to true level quickly, so the instrument is ready for immediate use after transport or handling. The design focuses on practical usability for maintenance teams and toolroom technicians who need fast verification rather than lengthy re-calibration procedures. Further technical advice and specification matching for production applications are available from Metav Werkzeuge to ensure the alignment solution integrates with existing setup procedures and measurement chains. Contact Metav Werkzeuge for specification matching and procurement assistance for the M215.133 precision spirit level from Metav IndustryLine; local technical advisers in Emmerich provide tailored guidance for workshop integration Technical data SKU: M215.133 GTIN: 4054469182605 Manufacturer: Metav IndustryLine Facts Measuring length: 300 mm Indication/readability: 0.02 mm/m Standard: DIN 877 Special features Material: grey cast iron Prismatic seating face Easily adjustable vial Category: angle measuring devices FAQ What level of accuracy does this spirit level provide? The M215.133 offers an accuracy of 0.02 mm/m and meets DIN 877, making it suitable for precise machine levelling and alignment tasks. Can the level be used on round shafts and profiled rails? Yes, the prismatic base ensures secure seating on cylindrical and profiled surfaces, improving contact and stability during measurement. Is the vial adjustable for quick recalibration? The instrument features an easily adjustable vial that allows rapid correction on-site without specialised equipment. Which workshops benefit most from this tool? Machine shops, maintenance teams and assembly lines benefit from the M215.133 thanks to its repeatable accuracy and stable cast-iron construction. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Spirit Level, 0.1 mm/m, Prism Base, Grey Cast Iron, Case - Metav IndustryLine
The combination of a 300 mm measuring base, 0.1 mm/m reading accuracy and a prism reference surface ensures dependable alignment and straightforward levelling tasks in machine and metalworking environments — order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Precision spirit level M215.144 — 300 mm, 0.1 mm/m, grey cast iron (Metav IndustryLine) A Precision spirit level M215.144 designed for workshop and machine‑tool levelling, featuring a prismatic reference surface and robust grey cast iron construction for stable readings. 300 mm length for workshop and machine use Accuracy 0.1 mm/m for precise alignment Grey cast iron for thermal stability Prism reference surface for clear readings Trusted accuracy for routine alignment tasks The instrument delivers a clear metrological benefit: a 0.1 mm/m reading makes it suitable for routine alignment and levelling operations where reproducible orientation is essential. With a 300 mm base, the instrument balances reach and handling, supporting straightness checks and alignment of machine beds, slides and small assemblies. The prismatic base provides a defined reference edge and promotes consistent contact with cylindrical or flat reference surfaces, which reduces user‑induced variability and speeds up setup cycles. This combination of features improves operational efficiency in quality control and machine maintenance. Built to keep readings stable under workshop conditions Constructed from grey cast iron, the device offers mass and thermal inertia that help dampen vibrations and limit short‑term thermal distortion during checks. The material choice contributes to long‑term dimensional stability, which is valuable during repeated levelling or when transferring settings between machines. The prismatic reference surface and embedded vials are designed to remain readable under typical workshop lighting, ensuring reliable interpretation of results. These design choices minimise rework time and support predictable production throughput. Practical handling and integration into workshop routines Ergonomic considerations are reflected in the compact length and readable vial layout, making the tool easy to position and interpret during one‑person operations. The instrument supports common levelling tasks encountered in machine setup, alignment verification and fixture checks; its specification is straightforward to incorporate into inspection protocols and maintenance checklists. Documentation such as GTIN and classification values allow simple stockkeeping and integration into procurement lists for facilities managing standardised workshop equipment. For precise, dependable levelling choose the Metav IndustryLine precision spirit level M215.144 — contact Metav Werkzeuge in Emmerich for ordering or technical consultation: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: M215.144 GTIN: 4054469109824 EClass: 21160113 ETIM: EC000145 TARIC/Customs code: 90153090 Facts Length: 300 mm Reading / accuracy: 0.1 mm/m Special features Material: Grey cast iron Prism reference surface Category: Angle measuring device / spirit level Brand: Metav IndustryLine FAQ What is the levelling accuracy of this instrument? The stated reading accuracy is 0.1 mm/m, which is suitable for workshop alignment and machine setup tasks with reproducible orientation requirements. Is the instrument appropriate for machine‑tool alignment? Yes — the Precision spirit level M215.144 from Metav IndustryLine is intended for levelling and alignment in machine and metalworking environments, offering a stable reference edge and readable vials for routine setup. What material is used and why does it matter? The body is made from grey cast iron, chosen for its damping properties and thermal stability, which help preserve measurement consistency during repeated use. Does the product include a calibration certificate? No ISO 17025 calibration certificate is specified for this model in the product data; if a traceable calibration is required, please contact Metav Werkzeuge for options and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Rail for Universal Angle Measuring Device No Packaging - Metav IndustryLine
Take advantage of a compact, rigid 300 mm mounting solution with a 16×2.5 mm profile and minimal mass for fast alignment and repeatable angle referencing; order the rail directly via Metav Werkzeuge or consult our technical advisors if further specification is required 300 mm rail for TOP universal angle measuring device — 16×2.5 mm profile The 300 mm rail for TOP universal angle measuring device is a compact mounting rail designed to provide a stable reference for angle measurement and fixturing in metrology and workshop environments 300 mm precision mounting rail 16 × 2.5 mm cross-section profile Lightweight: 0.1 kg for easy handling Compatible with TOP universal angle devices Stable reference for repeatable angle measurements The rail serves as a rigid reference that reduces alignment variation during repetitive angle checks. With a nominal length of 300 mm and a slim 16×2.5 mm profile, the component balances reach and stiffness to deliver consistent mechanical positioning in tight setups. This stability is advantageous where reproducible readings are required across batches or when establishing a fixed datum in inspection jigs. The combination of profile geometry and low mass supports fast handling without sacrificing the repeatability expected in production metrology. Compact profile for integration into fixtures and test benches The narrow profile of the rail allows it to be integrated into existing test benches, height gauges or dedicated angle fixtures without demanding extra space. Its 16×2.5 mm cross-section is especially useful when installation space is limited but a secure mounting surface is still necessary. The design simplifies retrofitting tasks and reduces the need for custom adapters, making the component a pragmatic choice for laboratories and small-series production where flexibility is essential. Low weight for quick set-up and handling Weighing only 0.1 kg, the rail is easy to manoeuvre during assembly and inspection routines. The low mass reduces operator fatigue when repeated repositioning is required and shortens the time needed to reconfigure setups between jobs. In practical terms, the lightweight nature of the component contributes directly to improved throughput in workshop workflows, as handling times and clamping adjustments are reduced. Designed for straightforward compatibility with angle units The rail is specified for use with TOP universal angle measuring devices, ensuring mechanical compatibility with that product family. This compatibility means fewer alignment complications at the interface and a predictable fit when replacing or upgrading existing measurement components. For applications that demand a reliable mechanical coupling to the measuring head, the rail provides a clear, purpose-built mounting surface. Supplied without packaging for economical logistics Delivered without packaging, the component reduces bulk and waste when integrated into larger shipments or production kits. This format is particularly suited to OEM assembly lines and refurbishment environments where the rail is incorporated directly into a toolset or calibration fixture. The delivery format streamlines storage and handling when items are being kitted for on-site installation or factory modification. Practical advantages for inspection and small-batch production As a compact mounting element, the rail supports faster setup, simpler alignment and consistent positioning across inspection cycles. Its combination of 300 mm length, precise profile and negligible weight makes it a practical accessory for workshops, calibration benches and quality control stations that require dependable mechanical references without extensive modification to existing equipment. Contact Metav Werkzeuge for advice on integrating this 300 mm rail into existing measurement rigs or to discuss compatible TOP angle devices — Metav Werkzeuge can provide technical guidance from Emmerich and supply the article directly Technical data Article number: M214.098.3 GTIN: 4061905053627 Brand: Metav IndustryLine Label: 300 mm Schiene für TOP-Univ.-Winkelmessgerät ohne Verpackung Facts Length: 300 mm Cross-section: 16×2.5 mm Weight: 0.1 kg Special features Supplied without packaging Compatible with TOP universal angle measuring devices Compact profile for fixture integration FAQ What is the exact length and profile of the rail? The rail measures 300 mm in length and features a 16×2.5 mm cross-section; reference the article number M214.098.3 for ordering. Is the rail delivered packaged? No, the item is supplied without packaging, which is suitable for kit assembly or direct integration into production shipments. Which measuring units does this rail suit? The rail is designed for mechanical compatibility with TOP universal angle measuring devices and related mounting setups. Can the rail be used as a reference in inspection fixtures? Yes, the rail provides a stable, repeatable mechanical reference that can be incorporated into inspection jigs and calibration benches. How heavy is the component and what does that mean for handling? At 0.1 kg, the rail is lightweight and easy to handle, enabling quick repositioning and faster set-up times across small-batch or repetitive tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ensure precise alignment across your workflow
Angle measuring instruments, also offered as angle gauges, inclinometers or digital angle finders, provide the foundational accuracy required in modern manufacturing, machine building and professional workshops. These instruments permit reliable angle determination, transferring angular measurements directly to workpieces and verifying geometric conformity during production and inspection.
How these instruments work and where they are essential
Mechanical angle gauges typically consist of a semicircular protractor and a movable arm with a precise vernier, plus a locking screw to fix the measured value for transfer or repeated checks. Digital angle measuring instruments combine robust mechanical legs with electronic sensors and an LCD display, delivering immediate readings that reduce interpretation errors and accelerate routine checks. Digital inclinometers determine angles relative to gravity and can show relative and absolute inclinations simultaneously, making them ideal for aligning machine beds, pipework or axes where gravity-referenced angles matter.
Measurable benefits that improve production efficiency
- Faster setup and fewer rejects thanks to the zero function, which allows the display to be zeroed at any position for quick relative measurements.
- Safer readings in confined or overhead positions using the hold function and rev function for 180° display rotation.
- Reduced downtime and wear by using instruments with chromed special steel housings or anodised aluminium bodies that resist corrosion and maintain profile stiffness.
- Hands-free alignment on ferrous surfaces through a robust magnetic base, enabling single-operator adjustment on steel constructions.
- Dependable analogue options with a high-precision vernier for environments where electronic devices are unsuitable.
Metav: precision made accessible for every workshop
Metav positions itself as a dependable partner for industrial buyers who require both variety and quality. Based in Emmerich, Metav acts as a quality filter for the European market, offering an extensive range of analogue and digital angle measuring instruments alongside comprehensive workshop equipment. With over 48,000 customers and a catalogue exceeding 250,000 products, Metav supplies reliable stock and clear order handling so teams can focus on production rather than logistics. If you require rapid selection advice or product matching, Metav’s curated assortment simplifies procurement decisions for maintenance, toolrooms and quality departments.
Compact summary
Angle measuring instruments, whether analogue or digital, secure repeatable alignment, speed up inspection processes and reduce rework by combining proven mechanical design with modern sensor functions such as zero, hold and rev.
FAQ
What is the advantage of a digital inclinometer over a mechanical angle gauge?
A digital inclinometer delivers immediate numeric readings on an LCD display and often includes functions such as zero, hold and rev, making the device faster and less error-prone for serial inspections than a purely mechanical angle gauge.
When should I choose an instrument with a magnetic base?
Choose an instrument with a magnetic base for alignment tasks on ferrous constructions, such as machine beds or steel frames, where hands-free positioning and stable attachment significantly improve accuracy and safety.
Are anodised aluminium instruments suitable for mobile service work?
Yes. Instruments with anodised aluminium bodies offer low weight with high profile stiffness, making them especially suitable for large-format tools and mobile service engineers who need portability without compromising precision.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com