Precise angle measurement for reliable machining setups
Angle measuring instruments and their variants such as inclinometers, goniometers and protractors provide exact determination of inclinations to ensure dimensional accuracy and process stability in metalworking and machine building. Designed for workshop use or laboratory quality control, these devices enable precise alignment of components and transfer of angle values onto workpieces, with options ranging from robust mechanical protractors to high-resolution digital inclinometers. Features like zeroing, hold and reverse display modes support efficient serial inspection and machine setup, while materials such as matt-chromed special steel or anodised aluminium ensure durability and resistance to coolants and workshop conditions.
300x600mm Angle Gauge 10–170° With Adjustable Length Rail And Locking Screw, Chrome Steel - Metav IndustryLine
Combining a broad 10–170° angle range, a length-adjustable guide rail and a secure locking screw delivers reliable, repeatable angle settings for jig, fixture and welding work. Order the gauge directly via Metav Werkzeuge or consult our specialists for application-specific advice. Angle Gauge M214.164 — Adjustable 10–170° Bevel Protractor by Metav IndustryLine M214.164 is an industrial bevel protractor designed for setting and checking angles from 10° to 170° in workshop, assembly and toolmaking environments Angle range 10–170° Length-adjustable guide rail Matt chrome-plated steel construction Locking screw for repeatable settings Precise angle setting for production work The tool offers a wide angle range (10–170°) with a clear 1° graduation, making it suitable for general fabrication, jig alignment and assembly tasks where speed and clarity matter. The graduated scale is engineered for unambiguous readings, so angle correction and transfer require fewer adjustments. This combination of range and readability reduces setup time and minimises rework in repetitive operations, supporting efficient shop-floor routines and predictable throughput. Robust build for repeatable measurements Constructed from steel with a matt chrome finish, the gauge balances stiffness and corrosion resistance for everyday industrial use. The cross-section of 32 x 4.2 mm provides structural stability across the 300 x 600 mm blade, helping to keep deflection low during handling. At 1.5 kg, the instrument remains manageable by a single operator while offering the mass needed for stable contact against workpieces. The integrated locking screw secures the chosen angle for repeated transfers and fixturing tasks, improving reproducibility between operators. Flexible guide rail for versatile applications The length-adjustable guide rail allows the measuring edge to be positioned to match part geometry, which is particularly useful when working with large plates or assemblies. The adjustable rail simplifies alignment to straight edges or reference faces and supports both layout and inspection activities. With its practical dimensions and mechanical locking, the device functions as a reliable workshop bevel protractor and a pragmatic angle transfer tool for welding, sheet metal work and fixture set-up. For reliable angle setting and practical workshop use, contact Metav Werkzeuge to order the Metav IndustryLine M214.164 or to request guidance on integrating the gauge into production processes — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M214.164 GTIN: 4054469106977 Tariff number: 90178090 Label: Gradmesser, 10-170°, 300 x 600mm m. verstellb. Schiene u. Feststell; 1,5 kg Numbers / Core technical data Angle range: 10–170° Reading graduation: 1° Dimensions: 300 x 600 mm Cross-section: 32 x 4,2 mm Weight: 1.5 kg Special features / Design Material: steel, complete matt chrome-plated Adjustable guide rail for variable length positioning Locking screw for fixed angle settings Suited to workshop, fixture and welding alignment tasks FAQ What angle range does this instrument cover? The Metav IndustryLine M214.164 covers an angle range from 10° to 170°, suitable for most workshop and assembly tasks. How fine is the scale on the bevel protractor? The instrument has a clear 1° graduation for straightforward readings and rapid set-up of common angles. Is the gauge robust enough for everyday shop use? Yes, the gauge is made from steel with a matt chrome finish; its 32 x 4.2 mm cross-section and 1.5 kg mass provide stability for routine handling. Can angles be fixed for repeated transfers? The integrated locking screw secures the selected angle, enabling repeatable transfers and consistent fixturing with the M214.164. Which tasks is this angle gauge best suited to? The tool is ideal for jig and fixture alignment, welding set-ups, sheet metal layout and general workshop angle verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300° Digital Angle Gauge With Locking Screw, Steel Blade 300x600mm, 0.05° Resolution - Metav IndustryLine
Reliable angle measurement for workshop and inspection tasks is achieved by combining a clear digital display, robust steel construction and a secure locking screw for repeatable setups; the unit covers 0–180° on a 300 x 600 mm scale and is available directly from Metav Werkzeuge for immediate supply or technical consultation. M214.055 Digital Protractor — Digital Angle Gauge (0–180°, 300 x 600 mm) The M214.055 Digital Protractor is a precision digital angle gauge designed for layout, inspection and angle transfer in metalworking and general workshop applications. Digital display with ON/OFF, ZERO, HOLD/REV 0–180° measurement range Steel stop and scale construction Locking screw for fixed-angle setups Accurate, verifiable angle readings for reliable process control The M214.055 is engineered to provide consistent angular measurement across a wide range of workshop tasks. Its digital display and a resolution of 0.05° deliver numerically precise readings, making it suitable for layout work, jig alignment and quick inspection checks where repeatability matters. Using a clearly graduated 300 x 600 mm scale allows measurements on medium-format components without sacrificing rigidity. For users who need to compare set angles or feed measurement data into production records, the numeric clarity reduces interpretation errors and shortens inspection time. Robust build that stands up to daily workshop use Built with the stop and rail manufactured from steel, the instrument offers stable guidance and long service life under regular handling. The profile cross-section of 27.2 x 4 mm and a material thickness of 4 mm ensure sufficient stiffness for accurate readings over the full length, while the locking screw secures the selected angle for transfer or machining set-up. At approximately 2 kg it remains manageable for handheld tasks yet substantial enough to avoid unwanted vibration during measurement. This combination of materials and geometry delivers a durable tool that keeps calibration intervals predictable and maintenance straightforward. Practical readout and controls for faster, safer workflows The front-panel functions — ON/OFF, ZERO and HOLD/REV — simplify daily operation: zeroing at any reference face supports differential measurements, HOLD locks a reading for documentation, and REV allows reversing the display orientation for awkward set-ups. These controls thus convert measurement speed into operational efficiency, reducing cycle time on small batches and repetitive tasks. Clear numeric feedback paired with a secure clamp means fewer re-measures and more time focused on production. The instrument is also straightforward to integrate into existing inspection routines as a dependable angle transfer device. Choose the Metav IndustryLine M214.055 for dependable angle measurement and contact Metav Werkzeuge for personalised delivery from Emmerich and professional advice on integrating the instrument into workshop workflows Technical data Article number: M214.055 GTIN: 4054469168159 ECLASS: 21170304 Customs tariff no.: 90178090 Facts Measuring range: 0–180° Dimensions: 300 x 600 mm Resolution: 0.05° Weight: 2 kg Cross section: 27.2 x 4 mm Material thickness: 4 mm Special features Digital display with ON/OFF, ZERO and HOLD/REV buttons Locking screw for fixed-angle setups Stop and scale made of steel Category: Angle measuring instruments (Winkelmessgeräte) FAQ What is the smallest angle increment the instrument shows? The display provides a resolution of 0.05°, allowing for fine angular discrimination during layout and inspection. Is the measuring range suitable for general workshop use? Yes. The 0–180° range covers typical setup and transfer tasks in metalworking, toolmaking and fixture assembly. What materials make up the measuring faces and beam? The stop and scale are made from steel, providing stiffness and wear resistance appropriate for routine workshop use. Does the device lock a set angle for transfer or machining? Yes. The integrated locking screw secures the selected angle for repeatable transfer and machining set-ups. Which product and brand should be referenced when ordering or specifying this instrument? Refer to the Metav IndustryLine M214.055 Digital Protractor (digital angle gauge) when ordering or specifying the instrument. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300° Precision Protractor 300 x 600 mm Matt Chrome With Locking Screw - Metav IndustryLine
Take advantage of precise angle setting and a robust, matt chrome-plated steel construction to reduce setup time and increase process reliability; the integrated locking screw ensures repeatable results. Order the bevel protractor directly via Metav Werkzeuge or ask our consultants if needed. M214.155 bevel protractor — 0–180° angle measuring instrument, matt chrome-plated steel (Metav IndustryLine) The M214.155 bevel protractor is a workshop-grade angle gauge for setting and checking angles across a wide range of metalworking and inspection tasks. 0–180° measuring range 1° graduation scale Matt chrome-plated steel construction Locking screw for secure setting Faster, reliable angle setting for daily production The large 0–180° measuring span combined with a clear 1° graduation makes this instrument ideal for routine set-up work and process checks in metal fabrication and general machining. The simple scale reduces interpretation errors and shortens measurement cycles, delivering a practical improvement in throughput. As an angle measuring instrument the protractor allows for quick transfer of marked angles to workpieces and fixtures, helping to standardise set-ups across machines and operators. Built for repeatability with a corrosion-resistant finish Constructed from matt chrome-plated steel, the protractor resists surface wear and provides a stable reference over long service periods. The robust cross-section 30 x 3.9 mm contributes to torsional stiffness, while the generous 300 x 600 mm plate offers an extended reference edge for larger components. These characteristics reduce bending and flexing during measurement, so readings remain consistent even under repetitive use—translating into fewer reworks and greater confidence in production quality. Secure clamping and clear mechanics for straightforward handling A dedicated locking screw holds set angles firmly in place, preventing inadvertent changes during transfer or machining. The instrument’s diameter 280 mm pivot and clearly marked scale assist reliable alignment and rapid visual checks. The straightforward mechanical design keeps maintenance simple and makes the tool accessible to operators at different skill levels while supporting precise and repeatable adjustments where they matter most. Contact Metav Werkzeuge today for a technical consultation on the Metav IndustryLine M214.155 bevel protractor — request a specification sheet or arrange procurement via Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M214.155 GTIN: 4054469106892 eCl@ss: 21170304 Tariff number: 90178090 Manufacturer: Metav IndustryLine Facts Measuring range: 0–180° Resolution / graduation: 1° Dimensions: 300 x 600 mm Cross-section: 30 x 3.9 mm Diameter: 280 mm Special features Material / finish: matt chrome-plated steel Locking screw for angle fixation Category: angle measuring instruments FAQ What measuring range does the instrument cover? The M214.155 bevel protractor covers a 0–180° range, suitable for most workshop angle-setting tasks. How fine is the scale on this protractor? The protractor has a 1° graduation, allowing clear, repeatable readings for standard machining and inspection processes. Is the protractor suitable for heavy workshop use? The M214.155 is made from matt chrome-plated steel with a stiff cross-section, designed to withstand regular workshop handling and maintain consistent reference edges. Does the instrument include a locking mechanism to hold a set angle? Yes — the tool features a locking screw that secures the set angle during transfer and setup operations. Which brand and article should be referenced when ordering? Refer to the Metav IndustryLine M214.155 bevel protractor when ordering or requesting further specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
305mm Angle Gauge Shorty 0-180° Measuring Range, L-Scale [cm] - NEDO GmbH & Co. KG
Take advantage of the combination of a full 0–180° measuring range, a practical 30.5 cm leg for greater reach and a compact "shorty" format for confined workspaces; order the device directly via Metav Werkzeuge or consult the specialists for application advice. Winkelfix — NEDO angle measuring device, 0–180° range, 30.5 cm leg The Winkelfix is a compact angle measuring device designed for straightforward layout and verification tasks across workshops and production settings. 0–180° measurement range 30.5 cm leg length for extended reach Compact shorty format for tight spaces NEDO build for reliable handling Full-angle measurement for precise layout work The device offers a continuous 0–180° measuring range, enabling precise transfer and checking of any common angle encountered in joinery, metalworking or general fabrication. The design functions as a simple protractor combined with stable legs, so angle settings remain visible during marking and transfer. The result is improved precision during setup and fewer corrective passes, which contributes to more consistent part quality and reduced rework. Compact design that reaches where larger tools cannot A leg length of 30.5 cm provides useful reach for larger panels and assemblies while the shorty format keeps the instrument manoeuvrable in constrained environments. The compact footprint makes the tool especially suitable for bench work, tight machine surrounds and site tasks where portability matters. This balance between reach and compactness helps maintain accuracy without sacrificing accessibility. Streamlined workflow and easy workplace integration As an angle gauge built for practical use, the instrument fits naturally into layout, measuring and inspection routines. Its straightforward scale and leg geometry support rapid repetition of the same angle across multiple components, saving set-up time and reducing the chance of measurement-related delays. For further technical details or to confirm suitability for a particular application, Metav Werkzeuge provides direct advice and detailed information by e‑mail or phone at info@metav-werkzeuge.com / +49 2822 7131930 For supply or application support of the NEDO Winkelfix, contact Metav Werkzeuge for tailored advice and reliable delivery from Emmerich. Technical data SKU: 4000857612NW Product name: Winkelfix Manufacturer: NEDO GmbH & Co. KG Version: shorty Facts Measuring range: 0–180° Leg length: 30.5 cm Packaging unit: 1 Special features Product type: Angle measuring device Label: Winkelmessgerät Winkelfix Messber.0-180Grad Schenkel-L.30,5cm Application: Angle measurement for workshop and production tasks FAQ What measuring range does the instrument cover? The NEDO Winkelfix provides a continuous measuring range of 0–180°, suitable for all standard angle transfer and checking tasks. How long is the leg of the device? The instrument has a leg length of 30.5 cm, offering a balance between reach and compact handling for bench and site work. Is the device suitable for work in confined spaces? Yes; the shorty version of this angle measuring device is intended for tight work areas while still enabling practical reach for most layout jobs. Can the Winkelfix be used for repetitive marking tasks? The geometry and scale of the angle gauge support rapid repetition of the same angle across multiple parts, which helps to speed up routine layout and assembly work. Which company manufactures the Winkelfix? The Winkelfix is produced by NEDO GmbH & Co. KG; for supply and application assistance the item is supplied via Metav Werkzeuge (SKU 4000857612NW) Manufacturer: NEDO GmbH & Co. KG; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30mm Vial Level 25 Min Arc - Bayerische Maß-Industrie Arno Keller GmbH
Take advantage of the compact 30 mm diameter and 25 arc‑minute sensitivity for reliable horizontal levelling in confined setups; order directly via Metav Werkzeuge or consult our specialists for integration advice. Bull's‑eye spirit vial 30 mm · 25 arc minutes — Bayerische Maß‑Industrie (BMI) A bull's‑eye spirit vial 30 mm · 25 arc minutes (BMI) for precise horizontal levelling in machine set‑ups, jigs and inspection fixtures. 30 mm outer diameter for compact integration 25 arc‑minute sensitivity for precise levelling Precision‑made by Bayerische Maß‑Industrie Compact design that fits tight assemblies The 30 mm outer diameter of this bull's‑eye spirit vial is designed for installation where space is limited while still providing a clear reference for horizontal alignment. The small footprint enables retrofitting into machine tables, jigs or portable fixtures without extensive modification. Because the component is compact and mechanically stable, it reduces the need for frequent repositioning and supports a smoother workflow when setting up tools or inspection stages. Measurable sensitivity for consistent results With a sensitivity of 25 arc minutes (≈0.42°), the vial offers a quantifiable angular response that supports repeatable levelling operations. This specification means that the bubble shifts detectably with small deviations from true horizontal, enabling technicians to verify alignment numerically rather than by estimation. For users less familiar with angular units: one arc minute is 1/60 of a degree, so 25 arc minutes provides a practical compromise between coarse and ultra‑fine sensitivity for general workshop and light industrial tasks. Robust manufacture and broad application scope Made by Bayerische Maß‑Industrie, the vial is built to withstand daily use in production and maintenance environments. The construction emphasises stable mounting and optical clarity so that the sensitivity remains reliable over time. Typical applications include machine levelling, alignment checks on fixtures, optical bench set‑up and general quality‑control jigs. The component complements other metrology aids and can be combined with spirit levels or electronic inclinometers when procedures demand cross‑verification. Contact Metav Werkzeuge for tailored advice on integrating the BMI bull's‑eye spirit vial into existing workflows and for technical recommendations specific to levelling tasks Technical data Article number: 4000857464NW SKU: 4000857464NW Product: Bull's‑eye spirit vial Manufacturer: Bayerische Maß‑Industrie Arno Keller GmbH Type: Bull's‑eye spirit vial UID: 4000857464NW Facts Outer diameter: 30 mm Sensitivity: 25 arc minutes Packaging unit: 1 Special features Compact design for tight installations Quantified sensitivity for repeatable levelling Suitable for machine tables, jigs and fixtures FAQ What is the angular sensitivity of this vial and what does it mean for levelling? The vial has a sensitivity of 25 arc minutes; this allows technicians to detect small deviations from horizontal and achieve repeatable levelling for general workshop alignment tasks. Can the bull's‑eye spirit vial be mounted into custom fixtures? Yes, the compact 30 mm format is intended for integration into bespoke fixtures and machine tables, permitting easy retrofitting without extensive modification. Is this product suitable for precision inspection benches? The vial's measurable sensitivity and stable manufacture by Bayerische Maß‑Industrie make it suitable for many inspection benches where visual horizontal reference and routine accuracy checks are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32 x 7 mm Spirit Level With Scale, Round Vial, 0.29° Graduation - Metav IndustryLine
Take advantage of the compact 32 x 7 mm format, the scaled round vial and the high reading accuracy to speed up alignment tasks while keeping measurement uncertainty low; order or request advice via Metav Werkzeuge for smooth integration into existing inspection kits. Spirit level 32 x 7 mm with scale — compact round‑vial level by Metav IndustryLine The spirit level 32 x 7 mm with scale is a compact, scaled round‑vial level designed for quick angle checks and alignment tasks in confined workshop and assembly settings. Rounded vial for fast visual alignment Integrated scale for angle reference Readability 5/1000 (0.29°) Compact dimensions 32 x 7 mm Reliable angle verification in tight spaces The small format delivers concentrated precision where larger levels cannot reach: the 32 x 7 mm profile makes the tool ideal for confined fixtures, small jigs and detailed assembly work. The rounded vial offers immediate visual feedback, while the integrated scale supports a quick numeric reference for reproducible adjustments. With a readability of 5/1000 (0.29°), the level converts subtle inclination changes into clear, actionable readings, enabling efficient setup and reduced rework in production and maintenance operations. Clear numeric reference reduces setup time Combining a scaled vial with a distinct round bubble means angle checks are both intuitive and verifiable. The scaled vial simplifies alignment tasks that otherwise require separate angle gauges, cutting the number of handling steps. As a result, inspection routines become more consistent: the operator can document the observed scale value directly, improving traceability of adjustments and supporting standardised quality procedures on the shop floor. Practical design for everyday workshop use Although compact, the construction prioritises readability and durability for repeated use in industrial environments. The slim footprint allows the level to be kept within portable tool kits or fixed into fixtures without introducing significant bulk. This format suits bench work, small‑part assembly and field service checks where quick, dependable angle reference is required rather than high‑volume measurement throughput. For accurate, compact angle control choose the Metav IndustryLine spirit level 32 x 7 mm with scale — contact Metav Werkzeuge for ordering and technical guidance. Technical data Article number: M203.021 Name: Spirit level 32 x 7 mm with scale Manufacturer: Metav IndustryLine Facts Dimensions: 32 x 7 mm Readability: 5/1000 (0.29°) Vial type: round Special features Scaled vial for angle reference Compact format for confined spaces Suitable for workshop alignment tasks FAQ How precise is the level for angle checks? The spirit level 32 x 7 mm with scale provides a readability of 5/1000 (0.29°), making it suitable for precise visual alignment and routine workshop adjustments. Can this level be used in assembly fixtures and jigs? Yes, the compact 32 x 7 mm format and the scaled vial make the level easy to fit into fixtures, jigs and confined assembly stations for repeatable checks. Is the vial type suitable for fast visual checks? The tool features a round vial that delivers rapid visual alignment and a clear numerical scale for documented reference. Which brand and SKU should be quoted when ordering? Order reference: Metav IndustryLine spirit level 32 x 7 mm with scale, Article number M203.021. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
360° 150+200+300mm Angle Measuring Device With Magnifier, Auxiliary Angle And Fine Adjustment, Parallax-Free Reading, Three-Point Rails, Supplied In Case - Metav IndustryLine
Take advantage of the combination of 360° measurement, parallax-free reading and fine adjustment for reliable set‑ups and repeatable angle checks. Order the instrument directly via Metav Werkzeuge or consult the specialists if additional configuration advice is required. TOP Angle Gauge M214.097.T — analogue 360° gauge with magnifier and fine adjustment TOP Angle Gauge M214.097.T is a precision analogue angle measuring instrument for workshop and inspection use, supplied with 150, 200 and 300 mm rails and an added small‑angle accessory. 360° measurement across four quadrants Parallax‑free reading with magnifier Fine adjustment for precise alignment Robust 16 × 2.5 mm cross section Accurate angular setting for machine and toolroom work The instrument offers continuous 360° measurement arranged as 4×90°, enabling measurement and transfer across all quadrants without repositioning. The dial provides a reading resolution of 1/12° (approx. 5 arcminutes) while the guaranteed accuracy is 10 arcminutes, giving a clear technical basis for repeatable setups. These specifications support faster set‑up times and reduce the need for additional angle‑checking tools, which benefits production flow and quality control. Clear, repeatable readings to reduce operator error An analog dial engineered for parallax‑free reading is combined with a built‑in magnifier, making fine graduations easily visible at the bench. The mechanical fine adjustment allows incremental corrections during clamping or alignment, so adjustments can be made precisely without over‑tightening. The simple, mechanical design favours robustness in daily workshop routines and keeps measurement behaviour predictable under typical shop conditions. Flexible reach and robust construction for practical use Three interchangeable rails (150, 200 and 300 mm) increase the instrument’s effective reach while maintaining stiffness thanks to the 16 × 2.5 mm cross section of the profile. At a nominal weight of 1 kg, handling is straight forward for single‑operator workflows yet stable enough to avoid unwanted movement during sensitive measurements. The additional small‑angle accessory extends capability for fine angular tasks, making the device suited to layout, inspection and machine‑set‑up applications. Designed for dependable shop performance Built as an analogue solution with workshop durability in mind, the gauge supports rapid angle transfer and inspection without reliance on batteries or electronic interfaces. The combination of fine adjustment and parallax‑free reading reduces measurement scatter caused by operator technique, thereby increasing throughput quality in routine inspections. The instrument’s mechanical principle also simplifies maintenance and long‑term reliability compared with electronic alternatives. For precise angle control and dependable workshop performance choose the Metav IndustryLine TOP Angle Gauge M214.097.T and contact Metav Werkzeuge in Emmerich for tailored advice and supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.097.T GTIN: 4054469106564 Customs tariff number: 90178090 Facts Weight: 1 kg Accuracy: 10 arcminutes Reading resolution: 1/12° Rails: 150 + 200 + 300 mm Cross section: 16 × 2.5 mm Special features 360° measurement, 4×90° Analog dial, parallax‑free reading Magnifier Fine adjustment Analog instrument, workshop design Manufacturer: Metav IndustryLine FAQ How precise is the angle indication? The instrument provides a resolution of 1/12° (≈5 arcminutes) with an accuracy specified at 10 arcminutes, making it suitable for precise set‑ups and inspection tasks. Can it measure angles across all quadrants without reorientation? Yes, the 360° design with 4×90° arrangement enables measurements and transfers across all quadrants without the need to reposition the device. Are longer or shorter rails available for different tasks? The instrument is supplied with 150, 200 and 300 mm rails, which cover a wide range of workshop needs for layout and measurement while maintaining profile stiffness. Is the device suitable for routine machine set‑ups? The analogue principle, combined with fine adjustment and parallax‑free reading, makes this gauge well suited to day‑to‑day machine set‑ups and inspection routines. What additional accessories improve small‑angle work? An included small‑angle accessory enhances resolution and handling for finer angular measurements, complementing the built‑in fine adjustment mechanism. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
360° 300mm Rail Universal Angle Gauge With Dial Indicator, Fine Adjustment, 1/12° Resolution - Metav IndustryLine
Take advantage of precise angular indexing and reliable analogue readouts to speed up setup and inspection tasks; the Universal angle gauge with dial combines a full 360° range with a fine-adjustment mechanism for repeatable results. Order the instrument directly via Metav Werkzeuge or consult the specialists for application advice. Universal angle gauge with dial — 360° scale, 300 mm rail (Metav IndustryLine) Universal angle gauge with dial for precise angular measurement and fine positioning across workshop and inspection tasks Analogue dial for fine angular readouts 360° range with four 90° quadrants 300 mm rigid rail, cross-section 16 x 2.5 mm Fine-adjustment mechanism for repeatable indexing Accurate measurement for faster setup and verifiable results The instrument delivers an angular accuracy of 10 arcminutes, with a readable increment of 1/12° (≈5 arcminutes) on the analogue scale, complemented by an integrated dial indicator for micro‑adjustment. This combination translates into faster, more reliable setup operations because coarse alignment can be completed from the 360° scale and final positioning refined with the dial. The measurable values are objective and comparable, supporting documented quality checks and reducing rework caused by imprecise fixturing. Robust geometry and handling that reduce cycle time A 300 mm rail with a 16 x 2.5 mm cross-section provides the stiffness required for shop use while keeping the instrument light at 0.6 kg, which aids manoeuvrability during frequent repositioning. The four‑quadrant design (4×90°) allows continuous angular coverage without disassembly of the mounting, and the fine-adjustment control enables incremental movement for exact referencing. Together these features make the device suitable for short setup cycles and repetitive production tasks where repeatability matters. Practical applications and integration into the workflow Engineered for machine shops, toolrooms and quality control benches, the angle gauge functions as a precision reference for alignment, toolsetting and inspection. The analogue dial supports visual tolerance checks and small corrections, making the instrument a practical complement to digital measurement systems where a tactile, immediate reference is desired. Documentation of measurement scope and instrument identification supports traceable procedures and streamlined communication between production and inspection teams. For application-specific guidance and to request the Metav IndustryLine Universal angle gauge with dial (SKU M214.083.T), contact Metav Werkzeuge for a tailored recommendation and delivery options Technical Data SKU: M214.083.T GTIN: 4054469106496 Category: Angle measuring devices Key specifications Rail length: 300 mm Cross-section: 16 x 2.5 mm Measurement range: 4 x 90° Angular accuracy: 10 arcminutes Reading increment: 1/12° (≈5 arcminutes) Weight: 0.6 kg Features Analogue instrument with dial indicator Fine-adjustment mechanism for precise indexing Full 360° continuous scale Four-quadrant operation for versatile fixturing FAQ How precise is the instrument for fine positioning? The Universal angle gauge with dial achieves an angular accuracy of 10 arcminutes and an analogue reading increment of 1/12° (about 5 arcminutes), which supports fine positioning and repeatable setups. Can the gauge be used for continuous 360° measurements? Yes, the device offers a full 360° range arranged as four 90° quadrants, allowing continuous angular coverage without the need to remount the instrument. What does the dial indicator add to the instrument? The integrated dial indicator provides micro‑adjustment capability and a visual reference for small angular changes, improving repeatability during final alignment and inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
360° Angle Measuring Device 150+300mm Rails With Magnifier, Auxiliary Angle And Fine Adjustment - Metav IndustryLine
Take advantage of precise 360° measurement, parallax-free scale reading and a smooth fine adjustment for reliable angular layout and repeatable inspection results; order the TOP angle measuring instrument directly via Metav Werkzeuge or ask our consultants if needed. TOP angle measuring instrument M214.096.T – analogue 360° gauge with 150+300 mm rails (Metav IndustryLine) The TOP angle measuring instrument is an analogue 360° gauge for workshop layout and inspection, designed for clear scale reading and controlled fine settings on medium-format workpieces. Analogue 360° measurement capability Parallax-free scale reading for safe reads Integrated magnifier and fine adjustment Delivered in a protective transport case Precision that reduces rework The instrument delivers repeatable angular checks by combining a true 360° measuring range with a readable scale and a reliable fine adjustment mechanism. The engraved scale with a division of 1/12° supports close visual alignment while the specified 10′ accuracy (ten arcminutes) ensures measured angles meet common workshop tolerance levels. This avoids guesswork during set-up and reduces time spent on corrective milling or fitting. Built for repeatable workshop use A dual-rail configuration of 150+300 mm rails gives flexibility for layout on components of different sizes while maintaining structural stiffness. The analogue design provides direct tactile feedback; the parallax-free reading minimizes misreads at oblique viewing angles and is beneficial when measuring under variable lighting. The instrument’s compact mass and balanced cross-section support stable placement on jigs and fixtures for consistent results across repeated measurements. Intuitive handling with controlled magnification An integrated magnifier aids in reading fine graduations without cumbersome tools, improving throughput during inspection runs. The mechanical fine adjuster allows micro-corrections without over-tightening, which helps to keep human-induced variation low. As an analogue gauge, the device is straightforward to use in production environments where quick visual verification is preferred over electronic set-up, combining speed with the quality required for reliable process control. Ready for shopfloor transport and inspection duties Robust detailing, a clear scale and a delivered protective case make the instrument practical for daily workshop use and for mobile inspection rounds. The construction supports straightforward mounting on measuring fixtures and the cross-section profile contributes to torsional stability when spanning small assemblies. Backed by the Metav IndustryLine proposition, the gauge is intended to be an accessible precision tool that integrates easily into routine quality checks. Discuss the Metav IndustryLine TOP angle gauge with Metav Werkzeuge to confirm fit for purpose or to arrange supply and technical advice. Technical data Article number: M214.096.T GTIN: 4054469106557 Category: Angle measuring instruments ECLASS: 21170322 Tariff number: 90178090 Label: TOP-Winkelmessgerät, 360°, 150+300 mm Schienen mit Lupe, Zusatzwinkel und Feineinstellung SKU: M214.096.T Facts Weight: 0.7 kg Measuring range: 4 × 90° (360°) Rails: 150 + 300 mm Cross-section: 16 × 2.5 mm Scale division: 1/12° Accuracy: 10′ (arcminutes) Special features Analogue instrument Parallax-free reading With magnifier Fine adjustment Protective transport case included Four-quadrant measurement configuration Category path: Messgeräte › Winkelmessgeräte FAQ What measurement range does the instrument cover? The instrument provides full 360° capability via four 90° segments and comes with 150 + 300 mm rails to suit medium-sized workpieces. What accuracy can be expected during routine checks? Typical measurement accuracy is ten arcminutes; the engraved scale with 1/12° divisions supports close visual alignment for workshop tolerances. Is the device suitable for mobile inspection rounds? Yes, the device is delivered in a protective case for secure transport and is designed for repeatable on-site inspection tasks. How does the magnifier help during use? The integrated magnifier improves readability of fine graduations, allowing quicker and more reliable readings on the analogue scale. Which model and brand should be referenced for orders or documentation? Refer to the Metav IndustryLine TOP angle measuring instrument, model M214.096.T, when ordering or specifying in documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
360° Digital Angle Gauge Blade 200 x 30 mm 0.05°/1' Reading, Locking Screw - Metav IndustryLine
Take advantage of precise angle measurement, a slotted 200 x 30 mm blade and a full 360° range for reliable layout and inspection work; order via Metav Werkzeuge or contact our consultants for application advice. Digital Bevel Protractor, 200 x 30 mm blade, 0–360° (Metav IndustryLine) The Digital Bevel Protractor, 200 x 30 mm is a workshop-grade angle gauge designed for precise angle setting, inspection and layout across a full 360° range. Slotted 200 x 30 mm blade High-resolution 0.05° / 1' readout On/Off, D/M and Hold controls Locking screw for repeatable fixes Accurate readings for production control The instrument delivers high-resolution measurements with a selectable 0.05° or 1' display, enabling reliable positioning where reproducibility is critical. With a continuous 360° measurement range, the device covers bevels, mitres and full rotations without the need for repositioning, reducing setup time and the risk of cumulative error. The clear numerical display and the D/M toggle ensure that values can be interpreted in the unit most useful for the task, which supports faster decision-making on the shop floor. Blade design that suits tight workspaces Equipped with a slotted blade sized at 200 x 30 mm, the gauge permits measurements in constrained locations and on stepped components where a solid blade might obstruct access. The rail profile of 200 x 27 x 1.2 mm provides a balance between rigidity and manoeuvrability so that angle transfer remains stable during handling. This geometry helps maintain contact with reference surfaces and reduces measurement scatter, translating into fewer rechecks and a smoother production flow. Simple controls and secure fixing for repeatable results Operation is straightforward thanks to dedicated On/Off, D/M and Hold controls that speed up routine tasks. The Hold function captures a reading for later documentation, while the locking screw secures the blade for repeated transfers of the same angle. These features combine to support both individual checks and batch inspection routines, improving throughput and ensuring traceable, repeatable outcomes without complex procedures. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine digital bevel protractor (M214.145.N) can be integrated into inspection workflows — tel +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M214.145.N Name: Digital Bevel Protractor, 200 x 30 mm blade, 0–360° Brand: Metav IndustryLine Measurement range: 360° Core specifications Blade dimensions: 200 x 30 mm Rail profile: 200 x 27 x 1.2 mm Display resolution: 0.05° or 1' Measurement sweep: 0–360° Features and functions Slotted blade for access in tight spaces On/Off, D/M and Hold buttons Locking screw for repeatable settings Suitable for layout, inspection and angle transfer FAQ What resolution and units does the device provide? The Digital Bevel Protractor (Metav IndustryLine, M214.145.N) offers a selectable resolution of 0.05° or 1', switched via the D/M control for degrees or minutes. Can the blade be locked for repeated transfers? Yes — the gauge is fitted with a locking screw so that set angles can be secured and transferred consistently using the bevel protractor (M214.145.N). Is the tool suitable for full-circle measurements? The instrument supports a full 360° measurement range, enabling complete rotation checks and mitre settings without repositioning. How does the slotted blade benefit workshop tasks? The slotted 200 x 30 mm blade on this digital bevel protractor allows access to narrow or stepped workpieces and simplifies inside and outside angle transfers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
360° Digital Angle Gauge Blade 200 x 30 mm With Auto Power-Off, ON/OFF/ZERO/D/M/HOLD Display Functions - Metav IndustryLine
Take advantage of precise angular measurement with a compact 200 mm blade, a full 0–360° measuring range and a digital display with ON/OFF/ZERO/D/M/HOLD functions for reliable workshop and inspection workflows. Order the Digital Bevel Protractor M214.145 directly via Metav Werkzeuge or ask our consultants for detailed advice. Digital Bevel Protractor M214.145 — 200 mm blade, 0–360° range Digital Bevel Protractor M214.145 provides continuous angular measurement across a full circle and is designed for set‑up, inspection and layout tasks in metalworking and general workshop use Digital display with ON/OFF/ZERO/D/M/HOLD buttons Measurement range 0–360° 200 x 27 x 1.2 mm rail Locking screw for secure positioning Automatic power-off Reliable measurement across a full circle for workshop precision The instrument delivers a continuous 0–360° measuring capability combined with a fine reading increment of 0.05°, making it suitable for angle checks, machine set‑ups and assembly inspections where consistent repeatability is required. The digital display simplifies the readout of both coarse and fine adjustments and reduces interpretation errors that occur with analogue scales. As a consequence, production steps that rely on precise angular alignment can be completed faster and with fewer rechecks. Robust handling and secure transfer of settings A compact 200 mm blade and a total weight of 0.5 kg balance reach and manoeuvrability, allowing stable one‑hand positioning during measurement tasks. The integrated locking screw secures a set angle for transfer or marking, which helps to maintain the measured value when moving between fixture and workpiece. The built‑in automatic power-off conserves battery life during intermittent use, so the instrument is ready when a sequence of measurements is required in a busy workshop. Intuitive controls that speed up inspection routines The on‑board control set (ON/OFF, ZERO, D/M toggle and HOLD) supports common measurement workflows: zeroing to a reference, switching display modes, and freezing a reading for documentation. The clear button layout reduces training time and accelerates routine checks on jigs, fixtures and assemblies. This makes the instrument a pragmatic choice for maintenance engineers, set‑up personnel and quality technicians who need straightforward operation coupled with dependable digital readouts. For reliable angle measurement from Metav IndustryLine, contact Metav Werkzeuge to discuss how the M214.145 fits into existing inspection routines or to request procurement support from our consultants. Technical data SKU: M214.145 GTIN: 4054469165516 Brand: Metav IndustryLine Category: Angle measuring instruments EClass: 21170130 Facts Measurement range: 0–360° Reading increment: 0.05° Blade/rail length: 200 mm Rail dimensions: 200 x 27 x 1.2 mm Weight: 0.5 kg Tariff number: 90178090 Special features Digital display with ON/OFF/ZERO/D/M/HOLD buttons Automatic power-off Locking screw for secure positioning Compact design for workshop use Suitable for set-up, inspection and layout tasks FAQ What is the measurement range of the device? The measurement range is 0–360°, allowing full‑circle angle checks and transfers with the Digital Bevel Protractor M214.145 from Metav IndustryLine. What resolution or reading increment does the instrument offer? The instrument provides a reading increment of 0.05°, suitable for precise alignment and inspection work where degree‑level resolution is required. Which controls are available on the digital display? The digital display includes ON/OFF, ZERO, a D/M toggle and HOLD, enabling quick zeroing, mode switching and freezing of readings for the Digital Bevel Protractor M214.145. Can set angles be fixed for transfer between workpieces? Yes — the built‑in locking screw secures the selected angle so it can be transferred or used for marking without losing the setting. For which applications is this instrument intended? The instrument is designed for workshop and inspection tasks such as machine set‑up, jig alignment, assembly checks and general angle measurement in metalworking and fabrication. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
360° Digital Angle Gauge Three-Point Measuring Rails 150mm/200mm/300mm Digital Readout ISO 17025 Calibrated - Microtech Metrology
Combine high accuracy, robust stainless steel construction and a traceable ISO 17025 calibration for reliable angle measurement; order the Digital Angle Gauge directly via Metav Werkzeuge or contact our consultants for technical advice. Digital Angle Gauge — Microtech Metrology (0–360°, ISO 17025 calibrated) A Digital Angle Gauge designed for fast, repeatable 0–360° angle checks in workshops and quality control environments. ISO 17025 calibration certificate included Stainless steel construction for workshop resilience Dual-line digital display for clear readings Fine-adjustment spindle for precise alignment Precision and measurement reliability for quality control The Digital Angle Gauge offers a full 0–360° measurement range combined with a high display resolution of 0.005° and an angular accuracy of 5 arcminutes, making it suitable for demanding inspection tasks and setup work. The instrument’s metrological performance is backed by a delivered ISO 17025 calibration certificate, which ensures traceability and reduces uncertainty in documented test procedures. This technical certainty supports faster decision‑making in incoming inspection and setup stages and lowers the risk of costly rework. Robust construction that withstands everyday workshop use Built from stainless steel, the gauge balances rigidity with corrosion resistance to tolerate regular handling at the bench. The design includes a fine adjustment spindle that enables controlled approach to the measured surface, and a digital display with two reading lines for simultaneous primary and reference values. These characteristics reduce measurement wobble and make the instrument practical for repetitive angle checks on jigs, fixtures and assembly components, improving throughput without sacrificing repeatability. Faster inspection workflows and clear measurement traceability Integration of a clear digital readout and precise mechanical guidance translates into process advantages: fewer manual interpolations, shorter cycle times and better documentation during audits. The included calibration certificate documents conformity to recognised standards and simplifies quality management workflows. Where traceable records are required for supplier qualification or production release, this angle instrument supports compliance while helping to maintain consistent part quality across batches. What is delivered and how it fits into the toolbox Delivered ready for use with a full calibration report, the package supports immediate inclusion in quality procedures and measurement routines. The stainless steel construction and compact form factor make the instrument suitable for shop floors, toolrooms and inspection benches. For rapid orientation: the device is digital, features a high-resolution display and fine mechanical control for repeatable results; further technical details and identifiers are shown below. Speak to Metav Werkzeuge for a tailored quotation, delivery options from Emmerich and advice on integrating the instrument into existing inspection processes — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 151136051 GTIN: 4061905047855 Manufacturer: Microtech Metrology Digital display: Digital with 2 reading lines Calibration: ISO 17025 certificate included Core specifications Measurement range: 0–360° Resolution: 0.005° Accuracy: 5 arcminutes Display lines: 2 Measuring rails: 150 mm / 200 mm / 300 mm Materials & features Material: stainless steel Fine adjustment: yes Digital: yes Calibration certificate: ISO 17025 Category: angle measuring device FAQ What is the measurement range of the instrument? The instrument measures across a full 0–360° range, suitable for all standard angle‑checking tasks. Is a calibration certificate included with delivery? Yes, the product is supplied fully calibrated with an ISO 17025 calibration certificate, providing traceable measurement results. What resolution and accuracy can be expected during use? Resolution is 0.005° on the display and the angular accuracy is approximately 5 arcminutes, appropriate for fine setup and quality checks. Is the housing suitable for workshop environments? The gauge is made from stainless steel, offering good resistance to typical workshop conditions while maintaining structural stiffness. Which identifier should be used for ordering or documentation? Use the article number 151136051 and GTIN 4061905047855 for ordering and traceability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
360° Digital Level Dual-Axis Bluetooth Wireless Angle Gauge 0.05° Resolution, LED Display, Built-In Magnet - Digi-Pas
Take advantage of the combination of Bluetooth connectivity, compact two-axis measurement and reliable ±0.1° accuracy to speed up levelling tasks and reduce rework. Order the instrument directly via Metav Werkzeuge or consult the team for application advice. Digi‑Pas DWL-90Pro two‑axis digital inclinometer with Bluetooth and LED display The DWL-90Pro is a compact, pocket-size digital inclinometer designed for fast, simultaneous X‑ and Y‑axis levelling in installation, inspection and clinical assessment tasks. 2-axis digital measurement with Bluetooth app ±0.1° accuracy near zero for precise levelling Built-in magnet and compact pocket size User self-calibration and bright LED display High-precision readings for consistent setup quality The instrument delivers high-precision angle data with a measuring resolution of 0.05° and an accuracy of ±0.1° at 0°–1° (±0.2° up to 89°). These specifications translate into noticeably fewer adjustments during installation work, since small deviations are detected and quantified rather than estimated visually. The technical resolution figure indicates the smallest step the device can reliably show; in practice this means smoother alignment of frames and fixtures and a measurable reduction in rework. This level of numerical certainty helps standardise routine checks across teams and sites. Wireless two-axis workflow speeds installation and reporting Equipped with Bluetooth and compatible with the Digi‑Pas Smart Levels app, the device displays both X and Y axes simultaneously on a paired smartphone. Wireless transmission across an approximate 15 metres range permits safe readings from scaffolds or ladders while the unit remains attached to the workpiece. The dual-axis mode (0–5° for combined X&Y) and single-axis 360° capability allow flexible measurement strategies, reducing the number of setups required. Instant unit conversion between degrees and slope (%) and a clear numerical output support quick decision-making and straightforward documentation. Robust, site-ready design for trade and clinical use The compact housing (60 x 38 x 58 mm) combines practicality with useful on-site features: a strong built-in magnet secures the level to metallic surfaces, a bright LED display provides readable values at a glance, and user self-calibration enables straightforward resetting to factory reference without special tools. Power comes from 2 × AAA 1.5 V cells, a common battery format for quick replacement in the field. Functions such as alternate zero, hold and auto shut‑off are engineered to preserve battery life and streamline repetitive measurements, making the tool suitable for installers, survey teams and therapeutic practitioners alike. Clear benefits across diverse applications This pocket-size digital level supports tasks from aligning window frames, doors and solar modules to specialist applications in rehabilitation and orthopaedics where rapid numerical range‑of‑motion measurements are required. The combination of two‑axis measurement, wireless readout and compact form reduces setup time during satellite dish alignment and prevents installation errors that can lead to binding sashes or uneven gaps. In clinical settings the fast numerical feedback aids objective tracking of patient progress; for operating‑theatre use the device can be applied provided appropriate sterilisation procedures are observed. Contact Metav Werkzeuge for tailored advice on the Digi‑Pas DWL‑90Pro’s Bluetooth two‑axis levelling features and application suitability; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss technical details or order directly Technical data Article number: DWL-90Pro GTIN: 8887726110983 Manufacturer: Digi‑Pas Facts Measuring range single axis: 360° (4 × 90°) Measuring range dual axis: 0 ~ 5° (X & Y) Resolution: 0.05° Accuracy: ±0.1° (0°–1°); ±0.2° (1°–89°) Bluetooth range: approx. 15 metres Operating temperature: 0–50°C Dimensions: 60 × 38 × 58 mm Power supply: 2 × AAA 1.5 V Special features Bright LED display with ON/OFF, ZERO, HOLD and mm/m button User self-calibration function Strong built-in magnet for metal surfaces Digi‑Pas Smart Levels app compatibility for wireless readout Alternate zero, hold and auto shut‑off functions Instant unit conversion between degrees and percent slope Absolute level setting for front and reverse positions Typical applications: satellite alignment, window/door installation, solar module inspection, rehabilitation and orthopaedic assessment FAQ How accurate is the device for fine levelling tasks? The DWL-90Pro offers an accuracy of ±0.1° in the 0°–1° range and ±0.2° up to 89°, providing reliable numerical control for fine levelling and alignment jobs. Can measurements be read remotely via a phone or tablet? Yes. Wireless measurement is supported through Bluetooth and the Digi‑Pas Smart Levels app, allowing remote display of both X and Y axis angles from roughly 15 metres. Is the inclinometer suitable for clinical range‑of‑motion assessment? The compact digital level is used in therapeutic and orthopaedic environments to quantify joint angles and monitor progress; sterilisation is required for any operating‑theatre application. How is the instrument mounted during work? A strong built-in magnet secures the unit to ferrous surfaces for hands‑free measurement; the compact footprint also allows use on narrow profiles such as door frames. What maintenance or calibration is needed? The unit includes a user self‑calibration feature to reset reference values; routine checks and battery replacement (2 × AAA) keep the device ready for accurate use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
360° Electronic Inclinometer Digital Display °/%/mm/m/inch/ft - STABILA
Taking advantage of 360° measurement capability and a clear digital display with selectable units ensures faster, more reliable angle checks and fewer rework cycles; order the STABILA TECH 1000 DP directly via Metav Werkzeuge or consult their specialists for application advice. TECH 1000 DP electronic inclinometer — 360° digital display by STABILA The TECH 1000 DP is a compact electronic inclinometer with a digital display, designed for comprehensive angle checks across a full 360° range in workshops and on site. 360° measurement range Digital display with multiple units Robust build for workshop use Speed up checks with full‑range angle readings The 360° measurement range enables continuous angle checking without the need to reorient the instrument, which reduces measurement steps and saves time during setup and alignment tasks. As an electronic inclinometer, the instrument provides an immediate numerical reading on the digital display, eliminating the interpretation errors associated with analogue bubbles. For production lines and maintenance cycles, this translates into quicker throughput and a lower risk of incorrect adjustments, supporting a smoother workflow and fewer interruptions. Reduce errors through clear units and readable output Multiple display formats ( °/%/mm/m/inch/ft ) allow the same device to serve diverse applications without conversion errors. The mm/m option, for example, expresses slope as millimetres per metre and is commonly used for drainage and conveyor incline checks; seeing this value directly avoids calculation mistakes. The bright, legible readout shortens inspection times and improves traceability of measurements, which is particularly advantageous where documentable tolerances are required for acceptance or handover. Practical durability and compatibility for everyday use Designed for use in industrial metrology and trade environments, the unit combines a robust casing with intuitive controls to support routine angle verification and installation tasks. The digital display and compact form factor make the tool suitable for measuring on large assemblies as well as confined fixtures, while the brand reputation of STABILA underscores consistent manufacturing quality. Integration into workshop processes is straightforward: the instrument is intended to perform repeatable angle checks that contribute directly to reduced waste and improved assembly accuracy. For professional procurement or application support regarding the STABILA TECH 1000 DP, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich. Technical Data Article number: 4000857164NW Type: TECH 1000 DP Name: Elektronikneigungsmesser TECH 1000 DP 360Grad STABILA Product type: Electronic inclinometer Display: Digital display Packaging unit: 1 UID: 4000857164NW Facts Measurement range: 360° Packaging unit quantity: 1 Special features Display units: °, %, mm/m, inch, ft Display type: Digital display Brand: STABILA FAQ What measurement range does the inclinometer cover? The device covers a full 360° range, allowing continuous angle measurement without repositioning the instrument. Which units can be displayed on the readout? Readings can be shown in °/%/mm/m/inch/ft, enabling direct use in a variety of tasks, from slope verification to precision alignment. Is the instrument suitable for workshop and on‑site use? Yes, the compact digital inclinometer is designed for workshop environments and site checks, offering robust handling and quick numerical feedback. How does the mm/m display help in practical applications? The mm/m display gives slope as millimetres per metre, which is useful for drainage gradients and conveyor inclines where direct slope values avoid conversion errors. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
360° Twist Angle Gauge 150+300mm Digital Display Degrees And Minutes, 4′ Accuracy, Plastic Case - Metav IndustryLine
Reliable, workshop-ready angle measurement with 0.01° display resolution and 4′ accuracy, combined with a compact 150+300 mm rail layout and lightweight portability. Supplied in a protective transport case, the instrument supports full‑circle and quadrant checks for setup and inspection tasks. Order directly via Metav Werkzeuge or consult our specialists for tailored advice. Digital universal angle instrument M214.063 — 360° measuring range, dual 150+300 mm rails (Metav IndustryLine) The Digital universal angle instrument M214.063 is a compact digital angle gauge intended for workshop alignment, machine setup and inspection tasks requiring full‑circle and quadrant measurement capability. 360° full-circle measurement coverage Digital readout in degrees and arcminutes 150+300 mm compact rail configuration Supplied in a protective transport case Precision where it matters for alignment and inspection The instrument delivers a 0.01° display step and an overall repeatability specified as 4′ (four arcminutes), which translates into reliable angular discrimination for typical workshop tolerances. Displaying results in degrees and arcminutes avoids conversion errors when transferring readings into drawings or setup sheets. The combination of fine display resolution and the stated accuracy makes this device suitable for tasks such as spindle alignment, jig verification and angular checks on assemblies where consistent, reproducible readings reduce rework and inspection time. Its full‑circle capability also allows comparative measurements across fixtures without mechanical reorientation. Built for efficient handling and fast readings on the shop floor Ergonomic controls and a clear digital display simplify routine use: the instrument includes MODE, HOLD, ON/OFF/RED and CAL functions for flexible measurement workflows. The paired rail arrangement (150+300 mm) and a robust 16 × 2.5 mm cross-section provide a balance between compactness and stiffness, enabling steady readings during one-person setups. At about 0.7 kg, the device is light enough for portable inspection while retaining the mass needed to sit stably on a measuring surface. These mechanical and electronic details reduce cycle times in setup and quality checks by making each measurement straightforward and easy to record. Practical delivery, traceability and supplier reliability The instrument is delivered in a protective transport case, suitable for safe handling and storage between uses. The clear, labelled display and standard control set help integrate the gauge into inspection routines without lengthy training. Sourcing through Metav IndustryLine ensures availability from a European warehouse and access to a broad range of compatible measuring equipment and accessories; this supply chain proximity supports steady workshop workflows and fast replacement when required. The product’s technical design focuses on measurable improvements in process reliability and the predictability of alignment results. Choose Metav IndustryLine for reliable, workshop-ready angle measurement — contact Metav Werkzeuge for expert guidance and secure supply from Emmerich. Technical data Article number: M214.063 GTIN: 4054469106434 Tariff number: 90178090 Manufacturer: Metav IndustryLine Facts Weight: 0.7 kg Display resolution: 0.01° Accuracy: 4 arcminutes Rail configuration: 150+300 mm Cross-section: 16 × 2.5 mm Measurement ranges: 4×90°, 2×180°, 360° Special features Digital display with MODE, HOLD, ON/OFF/RED and CAL buttons Readout in degrees and arcminutes Supplied in a protective transport case for transport Category: Angle measuring instruments FAQ What measurement ranges are available with this instrument? The Digital universal angle instrument M214.063 supports quadrant and full‑circle measurement modes: 4×90°, 2×180° and full 360° coverage. What resolution and accuracy does the device offer? The device provides a display resolution of 0.01° and an operational accuracy of 4 arcminutes; the display presents values in degrees and arcminutes for direct interpretation. Which display and control functions are included? The instrument features a digital readout and keypad functions labelled MODE, HOLD, ON/OFF/RED and CAL for mode selection, value freezing, power control and calibration actions. Is the instrument suitable for portable inspection tasks? Yes. With a weight of approximately 0.7 kg and a compact 150+300 mm rail assembly, the gauge is designed for convenient handling during on‑site checks and workshop inspections. How is the instrument supplied? The instrument is delivered in a protective transport case (plastic or wooden as appropriate) to secure the device during storage and transit. What applications are typical for this angle gauge? Typical uses include machine alignment, jig and fixture verification, angular checks on housings and assemblies, and any workshop or inspection process that requires repeatable angular measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
360°x150/300mm Universal Angle Gauge With Dial Indicator, Fine Adjustment, 1/12° Graduation, Supplied In Case - Metav IndustryLine
Take advantage of the 360° measurement range, integrated dial gauge and precise fine-adjustment to speed up setup and inspection tasks; order the Universal angle gauge directly via Metav Werkzeuge or consult our specialists for application advice. Universal angle gauge with dial (M214.086.T) — 360° range, 150/300 mm rails Universal angle gauge with dial (M214.086.T) is a workshop-grade analogue protractor designed for precise angular setting and inspection in metalworking, toolmaking and quality control environments. Analogue dial gauge for fine readout 360° range with 4 x 90° indexing Dual rails 150 mm + 300 mm for flexible reach Fine-adjustment mechanism for exact alignment Fast, quadrant-to-quadrant measurement that fits workshop routines The instrument provides a full 360° capability through its four 90° indexing positions, which simplifies the transfer of angular settings across different machine setups. With an indicated 10′ accuracy and a readable step of 1/12°, the device translates angular information into actionable values for everyday tasks in production and inspection. This analogue protractor is especially suitable where a reliable visual reference and quick coarse positioning are required before any subsequent machining or verification steps. Dial indicator and fine-adjustment deliver repeatable set-ups An integrated dial gauge and mechanical fine-adjustment allow controlled, incremental movement when aligning components, reducing overshoot and human-induced variation. The robust 16 x 2.5 mm profile of the rails paired with the 150 mm and 300 mm bar options provides a balance of stiffness and reach, helping to maintain repeatability when indexing or checking fixtures. At approximately 0.7 kg, the tool is light enough for handheld manoeuvres yet solid enough to remain stable during precise adjustments. Clear benefits for production and inspection workflows By combining an analogue visual scale with a mechanical dial and a fine-adjustment drive, this protractor shortens setup times and lowers the need for iterative re-measurement. The simple, analogue design is maintenance‑friendly and integrates well into both shopfloor and toolroom environments, supporting rapid checks and manual alignments without the complexity of electronics. Backed by Metav IndustryLine quality, it serves as a pragmatic instrument for firms seeking dependable angular control in everyday manufacturing operations. Contact Metav Werkzeuge for tailored application advice and to request the Universal angle gauge with dial (M214.086.T) from Metav IndustryLine — expert guidance and direct supply from Emmerich by e‑mail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: M214.086.T GTIN: 4054469106502 Category: Angle measuring instruments Manufacturer: Metav IndustryLine Customs tariff number: 90178090 Facts Measuring range: 360° (4 x 90°) Accuracy: 10′ (arcminutes) Resolution/readout: 1/12° Rail lengths: 150 mm and 300 mm Profile cross-section: 16 x 2.5 mm Weight: 0.7 kg Special features Analogue instrument with dial gauge Fine-adjustment mechanism for precise alignment Dual-rail configuration for variable reach Workshop-suitable design for metalworking and toolmaking FAQ What is the indicated accuracy of this angle gauge? The Universal angle gauge with dial (M214.086.T) from Metav IndustryLine has an indicated accuracy of 10 arcminutes, suitable for workshop-level angular inspections. How is the angle read from the instrument? Angular values are read from the analogue scale with a readable step of 1/12° and fine-tuned via the integrated dial gauge for exact alignment. Which rail lengths are supplied with the protractor? The device includes two rail lengths — 150 mm and 300 mm — to provide flexible reach for a range of component sizes and set-up scenarios. Is the instrument suitable for production and inspection tasks? Yes, the analogue protractor is designed for production and toolroom use, offering quick quadrant indexing and a fine-adjustment drive for repeatable set-ups. What makes this model different from a simple bevel protractor? This model combines full 360° indexing with an integrated dial indicator and a mechanical fine-adjustment, delivering both broad angular coverage and precise incremental control for workshop applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400 x 1000 mm 0–180° Angle Gauge, Matt Chrome Finish With Locking Screw - Metav IndustryLine
Take advantage of a rigid, matt‑chrome steel design combined with a full 0–180° scale and secure locking for reproducible angle set‑ups; order the Angle Gauge M214.157 directly via Metav Werkzeuge or ask our consultants if needed. Angle Gauge M214.157 — Steel 0–180° measuring instrument, 400 x 1000 mm, matt chrome The Angle Gauge M214.157 is a workshop‑grade angle measuring instrument designed for full‑angle checks and alignment tasks in machining and inspection contexts, supplied with a locking screw for secure fixation. Steel construction, matt chrome finish 0–180° scale for full-angle measurement 400 x 1000 mm working length Includes locking screw for fixed positioning Consistent, repeatable measurements from a rigid profile The primary advantage of this angle gauge is its steel body with a matt chrome finish, which provides both durability and low reflectivity for clearer reading under workshop lighting. The generous cross‑section 40 x 3.9 mm gives the instrument the rigidity needed to resist flexing during handling, so measurements remain stable over repeated use. At approximately 4 kg, the instrument offers a balance between mass for steadiness and manageable handling during set‑up. These mechanical properties translate directly into repeatable results, reducing the need for constant re‑checks during production runs. Secure positioning and straightforward degree reading A dedicated locking screw secures the scale in place after alignment, enabling fixed comparisons or template use without slippage. The engraved scale is laid out for full‑angle measurement (0–180°) with a reading increment of 1°, making the instrument well suited to tasks where whole‑degree precision is sufficient—for example, coarse machine set‑up, table alignment or angle checks on jigs and fixtures. The clear, single‑degree graduations prioritise speed and unambiguous interpretation on the shop floor, improving workflow efficiency when exact sub‑degree metrology is not required. Built for robust workshop environments Surface treatment and material choice were selected for longevity: the matt chromium layer reduces glare and helps resist surface wear, while the steel substrate provides mechanical strength for everyday industrial use. The design is simple to integrate into standard inspection benches and assembly fixtures; the weight of the gauge contributes to stable contact when laid against profiles or workpieces. For environments where an immediately readable, mechanically rugged angle instrument is preferred over electronic alternatives, this solution delivers dependable performance with minimal maintenance. Typical applications and benefit scenarios The instrument is especially useful in machine shops, toolrooms and inspection departments for tasks such as aligning saw tables, checking welded assemblies, verifying fixture angles and setting up machining centres. In production environments where speed and reproducibility matter, the combination of full‑angle coverage, a secure locking mechanism and robust construction reduces set‑up time and the incidence of alignment errors, thereby supporting consistent part quality and fewer production interruptions. Choose the Metav IndustryLine angle gauge for dependable, repeatable angle measurement — contact Metav Werkzeuge in Emmerich for technical advice and ordering: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M214.157 GTIN: 4054469106915 Customs tariff number: 90178090 Facts Weight: 4 kg Measuring range: 0–180° Dimensions: 400 x 1000 mm Cross-section: 40 x 3.9 mm Diameter: 370 mm Reading increment: 1° Special features Material: steel, matt chrome‑plated Locking screw for fixed positioning Category: Angle measuring devices FAQ What level of accuracy can be expected from this instrument? The Angle Gauge M214.157 provides reliable whole‑degree readings (increment 1°) and mechanical stability for reproducible shop‑floor checks; it is intended for robust angle verification rather than sub‑degree metrology. Is the instrument suitable for heavy‑duty workshop use? Yes — the matt‑chrome steel construction and the substantial cross‑section provide the mechanical strength and wear resistance required in industrial environments. Can the gauge be used for machine set‑up and fixture alignment? Indeed, the full 0–180° scale and included locking screw make the gauge well suited to machine table alignment, fixture checks and similar set‑up tasks. How is the gauge read and secured during inspection? The scale is graduated in single degrees for fast visual reading and can be fixed in position using the built‑in locking screw to maintain a set angle during inspection or template use. Does the instrument require special maintenance? Routine care is limited to keeping the surface clean and dry; the matt chrome finish reduces glare and helps resist wear, while the steel body provides long service life under normal workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Digital Spirit Level With Magnet, Laser Line, Backlit Display, 4x90° Vials, Aluminium Frame - Metav IndustryLine
Compact, practical and precise: the 40 cm digital spirit level brings together a magnetic base, an integrated laser marking line and a backlit digital display to speed up alignment and angle checks on-site and in the workshop. Order the Digital spirit level 40 cm with magnet and laser directly via Metav Werkzeuge or ask our consultants if needed. Digital spirit level 40 cm with magnet and laser — two vials, aluminium frame | Metav IndustryLine The Digital spirit level 40 cm with magnet and laser is a versatile angle-measuring tool for alignment, installation and straightness checks on metalwork, joinery and site installations. Magnetic base for secure attachment Backlit display with correct orientation indicator Integrated laser marking line Robust aluminium frame with two spirit vials Faster, more reliable alignment with digital feedback A combination of a backlit digital display and clear analogue vials provides immediate, verifiable readings even in low light. The electronic readout offers INC/ABS switching and a HOLD function, which helps to freeze values during awkward or elevated measurements. The magnet on the base allows stable positioning on ferrous surfaces, reducing slip and rework, while the compact 40 cm length balances reach and rigidity for typical workshop and site tasks. Simple controls and practical power design for workshop routines The instrument is operated via clearly labelled keys (ON/OFF, INC/ABS, HOLD, light), enabling quick switching between relative and absolute measurement modes and easy data capture. Power is supplied by common 3×AAA batteries (not included), permitting rapid replacement on the job without special cells. The design avoids complexity while delivering consistent, repeatable performance for installers and maintenance teams. Clear visual guidance and laser-assisted marking for repeatable results Two spirit vials offer analogue verification when fine visual alignment is required, while the laser marking line provides a visible reference for marking out or transferring levels over distance. The display is equipped with an orientation feature so that the numeric readout always appears readable regardless of how the level is rotated, reducing interpretation errors and saving time during multi-angle work. Durable build for everyday industrial and trade use A frame made from aluminium combines low weight with stiffness, supporting accurate measurements without unnecessary bulk; the tool weighs approximately 0.42 kg, making it easy to handle yet robust enough for frequent use. The centred design of the vials and magnetic strip keeps the instrument stable on machine beds, pipes and profiles, promoting precise alignment across a range of applications from installation to quality checks. Choose Metav IndustryLine for dependable alignment tools and contact Metav Werkzeuge in Emmerich for expert advice and efficient supply — Metav Werkzeuge is available to discuss specifications and ensure the right fit for the task. Technical data SKU: M203.034 GTIN: 4054469182520 Brand: Metav IndustryLine Length: 400 mm Weight: 0.42 kg eClass: 21160113 Material: frame made from aluminium Power supply: 3×AAA (not included) Digital display: ON/OFF, INC/ABS, HOLD, light Measurement range: 4×90° Features: magnetic base, two spirit vials, backlight, laser marking line Digital: yes FAQ How accurate is the digital readout and how is it used alongside the vials? The digital readout provides quick numeric orientation while the two spirit vials deliver analogue confirmation; this combination allows visual fine-tuning and numerical control for repeatable alignments with the 40 cm level. Can the laser marking line be switched off when not required? Yes, the laser marking function can be engaged or disengaged, allowing the tool to be used purely as a spirit level or for laser-assisted layout work as needed. Is the magnetic base strong enough for use on vertical metal profiles? The integrated magnet secures the level to ferrous surfaces for hands-free measurement on horizontal and vertical profiles, improving stability during alignment tasks. What power source does the instrument use and are batteries included? The device runs on 3×AAA batteries; batteries are not included with delivery, enabling users to choose long-life or rechargeable cells to match workshop practice. Is the display readable in dimly lit environments? Yes, the backlit display ensures clear visibility in low light while the analogue spirit vials remain usable for quick visual checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400° Digital Angle Gauge 400 x 1000 mm With Locking Screw, 0.05° Resolution - Metav IndustryLine
Take advantage of precise 0–180° angle measurement combined with a robust steel rail and a secure locking screw for reliable set-ups and repeatable checks; order the unit directly via Metav Werkzeuge or contact our consultants for application advice. Metav IndustryLine Digital Angle Gauge M214.057 — 0–180° digital protractor, 400 x 1000 mm Metav IndustryLine Digital Angle Gauge M214.057 is a digital angle measuring instrument for workshop inspection and machine set-up, featuring a sturdy steel stop and rail and a locking screw for stable positioning Digital display with ON/OFF, ZERO and HOLD/REV 0–180° range for versatile angle checks Steel rail and stop for durable alignment Locking screw for repeatable measurements Accurate angle control to reduce rework and setup time The instrument supplies direct numerical readout across a 0–180° span, which simplifies alignment tasks and eliminates uncertain visual estimation. The digital display with ON/OFF, ZERO and HOLD/REV keys supports quick zeroing and temporary hold of readings, increasing throughput during repetitive checks. By replacing analogue guesswork with a clear digital value, the gauge reduces setup time, lowers scrap rates and improves process reliability in fabrication and inspection routines. Robust engineering for everyday workshop demands A steel rail and steel stop combine with a cross-section of 27.2 x 4 mm to deliver stiffness and resistance to bending during typical handling. The overall mass of 5 kg provides stable contact on benches and machine tables, reducing vibrational errors. The integrated locking screw fixes the angle once set, enabling repeatable transfers between jigs or workpieces—an advantage when identical angular positions must be reproduced across several components. Simple to use, easy to integrate into workflows Ergonomic controls and a clear numerical readout make the unit straightforward for operators with varied skill levels. The HOLD/REV function helps capture transient measurements and reverse the display orientation where space or sightlines are restricted. For quality documentation, the numeric output avoids misinterpretation; in production contexts this supports traceability and quicker decision-making. Overall, the instrument offers a practical balance of accuracy and user convenience for routine angular metrology. For procurement, technical clarification or to secure delivery from Metav Werkzeuge in Emmerich, please contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M214.057 GTIN: 4054469168173 Manufacturer: Metav IndustryLine Weight: 5 kg Dimensions: 400 x 1000 mm Core specifications Measurement range: 0–180° Scale reading: 0.05° Cross-section: 27.2 x 4 mm HS code: 90178090 Materials and features Stop and rail made of steel Locking screw Digital display with ON/OFF, ZERO and HOLD/REV keys Category: Angle measuring instruments FAQ What measurement range does the device cover? The gauge measures angles across a 0–180° range, suitable for most workshop and inspection tasks requiring full semicircle checks. Is the instrument suitable for machine set-up and jig alignment? Yes. The steel rail, robust cross-section and locking screw permit stable positioning and repeatable transfers during machine set-up and jig alignment operations with the Metav IndustryLine Digital Angle Gauge M214.057. How does the digital readout improve workflow compared with a visual protractor? The digital readout provides unambiguous numeric values and functions such as ZERO and HOLD, which speed up documentation and reduce interpretation errors when using the Metav IndustryLine angle gauge in production. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400° x 800 mm Angle Gauge 0–180° Matte Chrome Finish With Locking Screw - Metav IndustryLine
Take advantage of the combination of a wide 0–180° measuring range, a matt chrome-plated steel construction and a secure locking screw for reliable angle control in workshop and production situations; order the bevel protractor directly via Metav Werkzeuge or consult the Metav team for technical advice. M214.156 Bevel Protractor — 0–180° range, 400 x 800 mm (Metav IndustryLine) The M214.156 is a large-format bevel protractor designed for clear angle measurement and repeatable alignment tasks in metalworking, inspection and machine set-up operations. Large 0–180° measuring range Robust matt chrome-plated steel construction Locking screw for repeatable angle fixing Generous 400 x 800 mm measuring surface Precise angular control for layout and set-up The instrument provides a clear 0–180° scale with a 1° reading increment, suited to workshop layout, alignment and inspection where reliable coarse-angle readings speed up set-up and reduce rework. The graduated scale is designed for quick visual checks and for transfer of angular positions between components and fixtures. The measurable range and readable graduation translate into less downtime during machine set-up and predictable repeatability when aligning jigs, plates and assemblies. Durable construction to withstand workshop use Built from steel, fully matt chrome-plated, the protractor resists glare and offers robust surface protection against everyday workshop exposure. The substantial cross-section of 40 x 3.9 mm and a mass of 2.5 kg deliver a stable feel on flat surfaces, which helps keep the blade from flexing during use. The integrated locking screw secures the blade once the desired angle is set, enabling repeatable transfers without slipping — a practical advantage during repetitive tasks and quality checks. Large-format layout and efficient handling With an overall measuring surface of 400 x 800 mm and a compact footprint for its class, the tool combines reach with manageable handling for single-person operations. The design suits marking-out on plates, inspection of welded frames and alignment of assemblies where a long blade provides better contact and reference. The instrument’s form factor and finish reduce reflections under workshop lighting and make readings faster, reducing cumulative time over multiple measurements and helping maintain process flow. Contact Metav Werkzeuge for tailored specification support or to discuss how the M214.156 bevel protractor can be integrated into existing inspection routines Technical data Article number: M214.156 GTIN: 4054469106908 ECLASS: 21170304 Tariff number: 90178090 Category: Angle measuring devices Facts Measuring range: 0–180° Dimensions: 400 x 800 mm Cross-section: 40 x 3.9 mm Diameter: 370 mm Weight: 2.5 kg Reading increment: 1° Special features Material: Steel, fully matt chrome-plated Locking screw for blade fixation Stiff long blade for workshop layout Suitable for metalworking and inspection tasks FAQ What measuring range does the instrument cover? The M214.156 bevel protractor by Metav IndustryLine covers 0–180° with a 1° reading increment for straightforward angular checks. What material and surface finish does the protractor have? The instrument is manufactured from steel and finished with a matt chrome plating to reduce reflection and offer corrosion resistance. How is the angle secured during measurement? A locking screw secures the blade on the M214.156, permitting repeatable angle transfers and stable readings during marking and inspection. Which applications suit this angle gauge? The large 400 x 800 mm measuring surface and stiff 40 x 3.9 mm cross-section make the tool suitable for plate layout, machine set-up and inspection in metalworking environments. How heavy is the tool and how does it handle? Weighing 2.5 kg, the bevel protractor provides stable contact on larger components while remaining manageable for single-operator positioning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
43cm Angle Gauge Winkelfix Mini 0-180° Range - NEDO GmbH & Co. KG
Take advantage of a compact, workshop-ready solution that combines a full semicircle 0–180° measuring range with a 43 cm leg reach for reliable alignment tasks; the robust mini format keeps setup time low and improves process efficiency. Order the Winkelmessgerät directly via Metav Werkzeuge or contact our consultants for application advice. Winkelfix mini angle gauge (0–180°), 43 cm arms — NEDO The Winkelfix mini is a compact angle measuring device designed for precise alignment and rapid angle checks in workshops and on-site installations across a full 0–180° range. Wide 0–180° measuring range 43 cm leg length for extended reach Compact mini format for confined spaces Faster, more reliable angle alignment for production work The 0–180° measuring capability delivers full semicircle coverage, which simplifies the verification of mitres, set-ups and machine alignments. As an angle gauge, this tool reduces the need for multiple jigs by enabling direct angular checks across a wide span; the result is fewer setup iterations and a measurable gain in productivity. The clear mechanical concept of the device supports repeatable adjustments, so small errors in fixture alignment are identified earlier and corrected before they affect downstream operations. Compact form with practical reach for tight installations The mini execution pairs portability with a 43 cm arm length, allowing access into restricted areas without compromising stability. This balance of compactness and reach makes the instrument suitable for bench work as well as site tasks where larger devices are impractical. The space-saving format also eases storage and transport between workstations, supporting a lean workshop layout and quicker job changes. Fewer tools carried between locations mean less downtime and clearer organisation on the shop floor. Simple application and clear benefits for everyday tasks Designed as a pragmatic measurement aid, the gauge streamlines routine checks and quick inspections. For carpentry, metal fabrication and installation work, the device provides an immediate reference for angular conformity, speeding up decision-making during assembly and reducing rework. The straightforward mechanical design keeps training effort low and allows technicians to focus on the task rather than on complex measurement procedures. Where traceable calibration is required by process control, the gauge can be incorporated into regular inspection routines to maintain consistency. For professional angle measurement and compact handling, choose the NEDO Winkelfix mini — contact Metav Werkzeuge for purchasing and technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000857613NW SKU: 4000857613NW Product type: Angle measuring device Facts Measuring range: 0–180° Leg length: 43 cm Version: mini Special features Model: Winkelfix Brand: NEDO GmbH & Co. KG Packaging unit: 1 FAQ What angles can be measured with this device? The Winkelfix mini measures across a 0–180° range, enabling full semicircle checks for internal and external angle verification. Is the gauge suitable for site work and small workshops? Yes, the mini design and 43 cm arms make the angle gauge well suited to both workshop benches and on-site tasks where space is limited. Can the Winkelfix mini be used for both metal and wood applications? The Winkelmessgerät is intended for general angle verification and is commonly used in metalworking and carpentry for rapid alignment checks. What makes the Winkelfix mini practical for repetitive checks? The straightforward mechanical concept of the gauge supports quick, repeatable measurements, reducing setup time and the risk of cumulative alignment errors. Which SKU should be referenced when ordering or requesting information? Please refer to SKU 4000857613NW when enquiring about the Winkelfix mini angle measuring device. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
45cm Angle Measure Winkeltronic 0.05° Resolution 0.1° Accuracy IP52? - BMI
Take advantage of the combination of precise 0–355° measurement range, high 0.05° resolution and a large backlit display for faster set-up and fewer reworks; order the instrument directly via Metav Werkzeuge or consult our specialists for tailored advice. Winkeltronic — digital angle gauge with 0–355° range and 0.05° resolution The Winkeltronic is a compact digital angle measuring instrument designed for precise angle measurement and transfer in workshops and on-site assembly, featuring long arms for stable positioning and integrated spirit levels for reliable alignment. Large backlit display for clear readings High resolution 0.05° and ±0.1° accuracy Symmetrical arms for effortless alignment Hold function and automatic shut-off Faster, more accurate angle measurement for production tasks The digital angle gauge delivers a measurable improvement in workflow where repeatable angular accuracy matters. With a measuring range of 0–355°, an effective 0.05° resolution and an accuracy of ±0.1°, the device reduces uncertainty when transferring angles from drawings to fixtures. The 45 cm arm length provides stable contact on workpieces, while the ability to set the display to zero in any arm position simplifies comparative measurements and angle subtraction; this means fewer manual calculations and less time spent on setup. Clear readout and practical functions that reduce errors A large, backlit display makes readings quick to interpret in varying light conditions, cutting reading errors on busy shop floors. The instrument includes a dedicated Hold function to freeze a measurement for recording, plus an automatic shut-off after three minutes to preserve battery life. Symmetrically arranged arms allow effortless seating against edges and profiles, while the integrated horizontal and vertical spirit levels assist in maintaining plumb during transfer tasks. Together, these features increase throughput by reducing alignment retries and measurement ambiguities. Built for workshop reliability and simple integration into measurement routines The design focuses on dependable daily use: robust arms for repeatable placement and clear status feedback from the display. Power can be supplied by 4 × 1.5 V AA cells or 4 × 1.2 V rechargeable batteries, offering flexibility for workshop environments that favour rechargeable workflows. Zeroing at any arm position and the concise measurement readout support rapid handover between setup and machining steps, helping teams keep production moving with fewer stoppages. For complex setups or verification tasks, the device integrates smoothly into standard inspection routines and reduces the administrative burden of repeated manual checks. Contact Metav Werkzeuge for personalised technical advice or to request purchase details for the Winkeltronic via Metav’s sales team. Technical Data Article number: 4000857638NW Product type: Digital angle gauge Model: Winkeltronic Packaging unit: 1 Facts Measuring range: 0–355° Resolution: 0.05° Accuracy: ±0.1° Arm length: 45 cm Power supply: 4 × 1.5 V AA or 4 × 1.2 V rechargeable Automatic shut-off: 3 minutes Special features Large backlit display Hold function Zeroing in any arm position Symmetrical arm arrangement for easy positioning Integrated horizontal and vertical spirit levels UID: 4000857638NW FAQ What is the measuring range of the instrument? The instrument measures across a range of 0–355°, providing near-full rotation capability for most workshop tasks. What resolution and accuracy can be expected? Resolution is 0.05° and the instrument achieves an accuracy of ±0.1°, which supports fine angular adjustments and precise transfers. Can the device be zeroed at any arm position? Yes, zeroing in any arm position is possible, enabling comparative and relative measurements without repositioning the workpiece. What power options are supported? Power is provided by 4 × 1.5 V AA cells or 4 × 1.2 V rechargeable batteries, offering compatibility with common battery types. Does the display have a backlight and a hold function? The large backlit display aids visibility in low light and the Hold function freezes the current reading for documentation or transfer. Manufacturer / Responsible: Mahr GmbH Helios-Preisser Vertrieb; Ölbergstraße 19; 72501 Gammertingen; Germany; +49 7574 400-60
4x90° Digital Inclinometer 36x36mm Plastic Housing, Rechargeable Battery, Hold/Abs-Rel Display - Metav IndustryLine
Take advantage of precise, repeatable angle checks thanks to the combination of a 0.05° display resolution and a compact magnetic base for hands‑free alignment. Order the instrument directly via Metav Werkzeuge or consult our product advisors for application guidance. Digital Inclinometer M215.215 — compact 4 x 90° inclinometer with magnetic base The Digital Inclinometer M215.215 is a compact digital tilt gauge designed for quick, repeatable angle checks and alignment tasks across workshop, maintenance and assembly applications. Compact 36 x 36 mm magnetic housing Rechargeable lithium battery included 0.05° resolution, 0.2° accuracy HOLD and ABS/REL display functions Fast, reliable angle checks on the shop floor The instrument offers a display resolution of 0.05° combined with a stated accuracy of 0.2°, which supports precise alignment tasks during machine set‑up and routine maintenance. The digital readout includes HOLD and ABS/REL modes, enabling fixed readings and relative angle comparisons without additional calculation. For production environments where repeatability matters, the clear numerical feedback reduces interpretation errors and shortens inspection cycles, improving overall process efficiency. Compact magnetic housing for hands‑free alignment Housed in a 36 x 36 x 20 mm plastic casing and equipped with a permanent magnetic base, the device secures to ferrous surfaces for stable, hands‑free measurements. At just 0.2 kg it is easy to position in confined spaces and on machine beds, while the robust design maintains consistent contact during setup work. This makes the instrument particularly suitable for alignment of chucks, fixtures and small assemblies where access is limited and reliable support is essential. Low running costs and practical features for daily use Power is provided by a rechargeable lithium battery (3.7 V) supplied with a charging cable, eliminating frequent battery replacements and reducing consumables. An automatic shut‑off after approximately 3 minutes helps conserve charge between intermittent checks. The compact instrument supports four 90° measurement ranges for practical orientation checks across multiple planes. For further technical details or application advice, Metav Werkzeuge provides specialist support and documentation to ensure the instrument meets specific workshop requirements. Contact Metav Werkzeuge for tailored advice or to request a supply proposal for the Metav IndustryLine Digital Inclinometer M215.215 — reach our specialists in Emmerich by phone or email Technical data Article number: M215.215 GTIN: 4054469182483 Manufacturer: Metav IndustryLine Material: Plastic Housing dimensions: 36 x 36 x 20 mm Weight: 0.2 kg Measuring range: 4 x 90° Numbers / Core technical data Resolution: 0.05° Accuracy: 0.2° Battery: Rechargeable lithium 3.7 V Charge accessory: Charging cable included Auto shut‑off: ~3 minutes Special features / Versions Digital display with HOLD and ABS/REL functions Permanent magnetic base for hands‑free use Plastic housing for compactness and light weight Shows orientation correctly in any mounting position Compact design for confined spaces FAQ What is the measurement range of the inclinometer? The instrument measures across a 4 x 90° range, enabling orientation checks in four quadrant positions for comprehensive angle assessment. How precise is the readout on the display? The device provides a 0.05° display resolution with a declared accuracy of 0.2°, suitable for routine alignment and workshop checks. Is the unit ready to use out of the box? The inclinometer is supplied with a rechargeable lithium battery (3.7 V) and a charging cable, allowing immediate use after charging. Can the instrument be fixed to a machine for hands‑free operation? Yes, a permanent magnetic base secures the unit to ferrous surfaces for stable, hands‑free alignment tasks. Which display functions assist with comparative measurements? Integrated ABS/REL and HOLD modes permit relative angle comparisons and the capture of readings for repeatable checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4x90° Digital Inclinometer 96x45mm Plastic Housing With Vial And Magnet, Auto-Off, Rechargeable - Metav IndustryLine
Compact, accurate inclination control combined with practical handling: the device offers a measurement range of 4 × 90° (single-axis) or ±40° (dual-axis), an accuracy of 0.2°/0.3° and a rechargeable 3.7 V battery with charging cable. Order the M215.216 digital inclinometer directly via Metav Werkzeuge or consult our specialists for application advice. M215.216 Digital Inclinometer — compact electronic angle gauge with magnet and bubble vial The M215.216 Digital Inclinometer is a compact electronic angle gauge for quick and repeatable inclination checks in workshops, machine set-up and light construction where space and portability matter. Compact 96 x 45 mm plastic housing Rechargeable 3.7 V Li battery with cable Integrated bubble vial and magnetic base Consistent measurement performance for workshop alignment The instrument delivers reliable angle readings across its full range thanks to a measured accuracy of 0.2° (single-axis) and 0.3° (dual-axis) and a display resolution of 0.1°. This level of performance supports precise alignment tasks and routine checks on jigs, fixtures and machine beds, providing a verifiable numerical result rather than a subjective visual estimate. The digital readout includes ABS/REL capability to store reference positions and a HOLD function for measurements in awkward positions, helping to reduce rework and downtime. Practical features that speed up everyday use Designed for daily handling, the unit combines a lightweight 0.2 kg plastic housing with a permanent magnetic base and an integrated bubble vial, enabling both hands-free attachment and a quick analogue check. Power is provided by a rechargeable lithium battery (3.7 V); a charging cable is included and an automatic shut-off after approximately 3 minutes preserves charge between measurements. The display logic is arranged to always indicate the correct direction, reducing interpretation errors when switching between axes or rotating the gauge. Where this inclinometer adds measurable value The compact footprint (96 × 45 mm) and low mass make the instrument easy to carry between workstations and suitable for confined areas. It is particularly useful for fast machine alignment, level checks on mounted assemblies and on-site adjustments where a permanent level or bulky instruments are unsuitable. The combination of a digital readout with a bubble vial and magnetic base offers both speed and confirmation, ensuring that angle settings are both traceable and practically achievable during routine production or maintenance cycles. Contact Metav Werkzeuge for detailed specification support or procurement of the M215.216 inclinometers — secure supply and expert advice from Emmerich for reliable workshop precision Technical data Article number: M215.216 GTIN: 4054469182490 Manufacturer: Metav IndustryLine Core specifications Dimensions: 95.5 x 45 x 25.1 mm Weight: 0.2 kg Measurement range: 4 × 90° (single-axis) / ±40° (two-axis) Accuracy: 0.2° (single-axis) / 0.3° (two-axis) Resolution: 0.1° Battery: Rechargeable Li‑ion 3.7 V, incl. charging cable Features Plastic housing Integrated bubble vial Permanent magnetic base Digital display with HOLD and ABS/REL functions Automatic switch-off after approx. 3 minutes Always indicates correct direction FAQ How precise are the measurements with this inclinometer? The M215.216 provides measurement precision of 0.2° (single-axis) and 0.3° (two-axis) with a display resolution of 0.1°, suitable for workshop alignment and setup tasks. Is the device ready to use out of the box and how is it powered? The unit is supplied with a rechargeable 3.7 V lithium battery and a charging cable; the battery is included so the device is usable immediately after charging. Can the inclinometer be used on ferrous surfaces and is there an analogue reference? Yes — a permanent magnetic base allows secure attachment to steel parts, and the integrated bubble vial gives a quick analogue reference in addition to the digital readout. Which functions help when taking measurements in awkward positions? The digital HOLD function freezes readings for transfer, while ABS/REL lets the instrument capture reference positions; the display is designed to show the correct orientation to avoid interpretation errors. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ensure precise alignment across your workflow
Angle measuring instruments, also offered as angle gauges, inclinometers or digital angle finders, provide the foundational accuracy required in modern manufacturing, machine building and professional workshops. These instruments permit reliable angle determination, transferring angular measurements directly to workpieces and verifying geometric conformity during production and inspection.
How these instruments work and where they are essential
Mechanical angle gauges typically consist of a semicircular protractor and a movable arm with a precise vernier, plus a locking screw to fix the measured value for transfer or repeated checks. Digital angle measuring instruments combine robust mechanical legs with electronic sensors and an LCD display, delivering immediate readings that reduce interpretation errors and accelerate routine checks. Digital inclinometers determine angles relative to gravity and can show relative and absolute inclinations simultaneously, making them ideal for aligning machine beds, pipework or axes where gravity-referenced angles matter.
Measurable benefits that improve production efficiency
- Faster setup and fewer rejects thanks to the zero function, which allows the display to be zeroed at any position for quick relative measurements.
- Safer readings in confined or overhead positions using the hold function and rev function for 180° display rotation.
- Reduced downtime and wear by using instruments with chromed special steel housings or anodised aluminium bodies that resist corrosion and maintain profile stiffness.
- Hands-free alignment on ferrous surfaces through a robust magnetic base, enabling single-operator adjustment on steel constructions.
- Dependable analogue options with a high-precision vernier for environments where electronic devices are unsuitable.
Metav: precision made accessible for every workshop
Metav positions itself as a dependable partner for industrial buyers who require both variety and quality. Based in Emmerich, Metav acts as a quality filter for the European market, offering an extensive range of analogue and digital angle measuring instruments alongside comprehensive workshop equipment. With over 48,000 customers and a catalogue exceeding 250,000 products, Metav supplies reliable stock and clear order handling so teams can focus on production rather than logistics. If you require rapid selection advice or product matching, Metav’s curated assortment simplifies procurement decisions for maintenance, toolrooms and quality departments.
Compact summary
Angle measuring instruments, whether analogue or digital, secure repeatable alignment, speed up inspection processes and reduce rework by combining proven mechanical design with modern sensor functions such as zero, hold and rev.
FAQ
What is the advantage of a digital inclinometer over a mechanical angle gauge?
A digital inclinometer delivers immediate numeric readings on an LCD display and often includes functions such as zero, hold and rev, making the device faster and less error-prone for serial inspections than a purely mechanical angle gauge.
When should I choose an instrument with a magnetic base?
Choose an instrument with a magnetic base for alignment tasks on ferrous constructions, such as machine beds or steel frames, where hands-free positioning and stable attachment significantly improve accuracy and safety.
Are anodised aluminium instruments suitable for mobile service work?
Yes. Instruments with anodised aluminium bodies offer low weight with high profile stiffness, making them especially suitable for large-format tools and mobile service engineers who need portability without compromising precision.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com