Precise angle measurement for reliable machining setups
Angle measuring instruments and their variants such as inclinometers, goniometers and protractors provide exact determination of inclinations to ensure dimensional accuracy and process stability in metalworking and machine building. Designed for workshop use or laboratory quality control, these devices enable precise alignment of components and transfer of angle values onto workpieces, with options ranging from robust mechanical protractors to high-resolution digital inclinometers. Features like zeroing, hold and reverse display modes support efficient serial inspection and machine setup, while materials such as matt-chromed special steel or anodised aluminium ensure durability and resistance to coolants and workshop conditions.
180° Digital Angle Gauge 200 x 300 mm With Locking, ON/OFF Zero Hold Display - Metav IndustryLine
Benefit from rapid, repeatable angle checks and a rigid steel construction that keeps set-ups stable; the digital display and locking screw ensure clear readings and secure positioning during inspection and machining. Order the Digital Angle Gauge M214.053 directly via Metav Werkzeuge or consult our specialists if required. Digital Angle Gauge M214.053 — Digital angle gauge, 0–180°, 200 × 300 mm, Metav IndustryLine The Digital Angle Gauge M214.053 is a workshop-grade instrument for precise angle measurement and alignment across assembly, inspection and machine set-up tasks. Digital display with ON/OFF, ZERO, HOLD/REV 0–180° measurement range for versatile use Steel stop and 200 × 300 mm rigid rail Faster, reliable angle set-up for production With a readable digital display and a measurement span of 0–180°, this gauge reduces the time needed for routine angle checks and machine set-ups. The display offers ON/OFF, ZERO and HOLD/REV functions that simplify temporary datum setting and reverse-counting for complex fixtures. A 0.05° reading step provides finer indication than typical analogue tools, enabling more confident alignment decisions and fewer iterative adjustments, which accelerates throughput and reduces rework. Secure positioning and robust construction for repeatable results The instrument combines a steel rail and hardened stop with a precise locking screw, so measured angles remain fixed during transfers and clamping operations. The rail’s cross-section (27.2 × 4 mm) and plate thickness (4 mm) deliver profile stiffness that limits deflection during handling. At approximately 1.1 kg, the unit stays portable for bench or shop‑floor use while offering the rigidity expected in daily inspection routines. The result is reproducible measurement behaviour across repeated cycles. Practical controls and ergonomic handling to reduce errors Integrated control keys and a clear readout minimise interpretation mistakes and support faster operator workflows. The HOLD/REV function allows retention of transient readings and simple reversal of measurement direction for awkward geometries, while the ZERO key lets operators set relative angles quickly. The compact 200 × 300 mm footprint fits most benches and jig stations, making the instrument a practical choice for layout work, jig verification and rapid on-machine checks without sacrificing clarity of information. Trusted supply and industrial compatibility Produced for industrial metrology contexts, the design suits inspection, fixture set-up and general mechanical workshops. Supplied under the Metav IndustryLine umbrella, the gauge benefits from a European distribution and quality‑assurance focus that supports dependable replenishment and product consistency. Metav’s long experience in precision tools underpins availability and product advice, helping maintain operational continuity in production environments. Contact Metav Werkzeuge for a specification review or to request a quotation for the Metav IndustryLine Digital Angle Gauge M214.053 — our specialists in Emmerich will advise on fit and delivery options Technical Data Article number: M214.053 GTIN: 4054469168142 ECLASS: 21170304 Tariff number: 90178090 Facts Measurement range: 0–180° Reading increment: 0,05° Rail dimensions: 200 × 300 mm Cross-section: 27,2 × 4 mm Material thickness: 4 mm Weight: 1.1 kg Special features Material: stop and rail made of steel Digital display with ON/OFF, ZERO and HOLD/REV keys Locking screw for fixed positioning Compact workshop footprint suitable for benches and jigs FAQ How precise is the instrument for angle readings? The gauge provides a reading increment of 0.05°, offering finer indication than coarse analogue scales and supporting accurate alignment tasks with minimal iterative correction. What measurement range does it cover? The device measures from 0° to 180°, suitable for most fixture, alignment and component inspection applications. Which materials form the main structural parts? The stop and rail are manufactured from steel, giving the gauge the stiffness required for repeatable measurements. Are there any convenience functions on the display? Yes; the display includes ON/OFF, ZERO and HOLD/REV functions to set relative datums, retain readings and reverse the counting direction as required. Is the instrument portable for shop use? At approximately 1.1 kg and with a 200 × 300 mm footprint, the unit is designed to be handled on benches and transferred between machines while maintaining rigidity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Digital Bevel Protractor 400 x 800 mm With Locking Screw, Digital Display ON/OFF ZERO HOLD/REV - Metav IndustryLine
Take advantage of a robust steel rail and stop, a 0–180° measuring range with 0.05° readability, and a secure locking screw for repeatable angle settings — all designed to speed up setup and reduce rework. Order the digital protractor M214.056 directly via Metav Werkzeuge or ask our consultants if needed. Digital Protractor M214.056 — 0–180° electronic angle gauge, 400 x 800 mm, Metav IndustryLine The Digital Protractor M214.056 is a workshop-grade electronic angle gauge for precise angle setting and inspection across a full 0–180° range, ideal for assembly, jigs and quality control applications. Digital readout with ON/OFF, ZERO, HOLD/REV Measuring range 0–180° for versatile angle checks Steel stop and rail for durable alignment Locking screw for repeatable positioning Reliable precision that shortens setup time The electronic indicator with 0.05° readability provides clear, objective angular data so machining set-up and inspection become measurable and reproducible. The integrated digital readout (ON/OFF, ZERO and HOLD/REV functions) simplifies comparative measurements and makes it straightforward to record or hold a reading without guesswork. This reduction in manual interpretation translates directly into fewer corrective cycles and more consistent output across production runs. Robust construction built for workshop environments A stop and guide rail manufactured from steel form the structural backbone, combined with a 27.2 x 4 mm cross-section and a 4 mm material thickness where noted; this provides the stiffness required for stable alignment over the whole 400 x 800 mm assembly. At around 4 kg the unit offers a stable feel that resists unwanted movement during adjustment, improving the repeatability of angle setting on fixtures and assemblies. Practical controls for efficient measurement routines The device includes a locking screw that fixes the selected angle, enabling transfer of the set value from gauge to workpiece or jig without drift. The HOLD/REV function supports inertia-free readings when transferring between positions, while the ZERO button allows easy relative measurements. These features reduce handling time and support a predictable measurement workflow within inspection and set-up tasks. Designed for everyday industrial use and traceable identification As part of the Metav IndustryLine range, the unit carries a clear SKU (M214.056) and GTIN for inventory and procurement processes. The combination of a digital indicator, solid rail geometry and a locking mechanism suits repeated shop-floor use where consistent angle setting and quick verification are priorities. The electronic functionality makes it suitable for small-batch production where frequent re‑adjustments are required. For precise angle setting in jigs and inspection, contact Metav Werkzeuge in Emmerich for tailored advice on the Metav IndustryLine digital protractor M214.056 and guidance on delivery and integration. Technical Data Article number: M214.056 GTIN: 4054469168166 ECLASS: 21170304 Tariff number: 90178090 Manufacturer: Metav IndustryLine Facts Measuring range: 0–180° Readability: 0.05° Dimensions: 400 x 800 mm Cross-section: 27.2 x 4 mm Material thickness: 4 mm Weight: 4 kg Special features Digital display with ON/OFF, ZERO and HOLD/REV Steel stop and rail Locking screw (feststellschraube) Category: Winkelmessgeräte FAQ What measurement range does the protractor cover? The digital protractor covers a 0–180° range suitable for full-angle checks and settings on fixtures and assemblies. How fine is the angle resolution on this gauge? The instrument offers a 0.05° readability, delivering clear, workshop-appropriate precision for alignment and inspection tasks. Is the unit suitable for repeated shop-floor use? Yes, the steel rail and stop combined with the locking screw ensure durable alignment and repeatable positioning for routine production work. What controls are available on the digital display? The display includes ON/OFF, ZERO and HOLD/REV functions to support relative measurements, stable readings and easy data transfer. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Protractor 120 x 150 mm Matt Chrome Finish With Locking Screw - Metav IndustryLine
Take advantage of precise angle layout combined with a matt chrome-plated steel construction and a secure locking screw for reproducible readings; the compact 120 x 150 mm format keeps the instrument easy to handle in confined assemblies. Arrange procurement or ask for application advice via Metav Werkzeuge. Bevel Protractor M214.151 — Metav IndustryLine, 0–180° with locking screw Bevel Protractor M214.151 is a workshop-ready angle gauge for layout and inspection tasks, designed to measure and transfer angles between 0° and 180° with readable 1° graduations. Matt chrome-plated steel finish 0–180° measuring range Locking screw for secure readings Compact 120 x 150 mm design Precision where angle accuracy matters The instrument provides a 0–180° measuring range with a clear 1° graduation, making it suitable for routine layout, inspection and assembly operations that require repeatable angular settings. The scale is easy to read and the included locking screw secures the blade once the desired angle is set, which reduces operator-induced variation and supports consistent results across repeated checks. Such measurable control is especially useful when transferring angles between components or when verifying set-ups on jigs and fixtures. Robust construction for daily workshop use Constructed from steel, matt chrome-plated, the bevel protractor resists reflections and offers a durable contact surface that stands up to workshop handling. The cross-section of 12 x 2.2 mm and the compact 120 x 150 mm dimensions balance stiffness with manoeuvrability: the profile provides sufficient rigidity for reliable readings while the size allows access to tighter assemblies. These design choices support a practical compromise between durability and ease of use in metalworking and general fabrication environments. Practical benefits for process reliability As a straightforward angle measuring tool, this gauge assists in reducing set-up time and measurement uncertainty during routine tasks. The combination of a defined measuring range, a tactile locking mechanism and a matt finish means fewer readjustments and clearer markings under workshop lighting. For procurement and integration into a toolset, Metav IndustryLine instruments are supplied via Metav Werkzeuge, whose warehousing and quality control help ensure timely delivery and consistent product standards to the European market. Contact Metav Werkzeuge to discuss the Metav IndustryLine bevel protractor M214.151 for your application or to request specification support and procurement guidance Technical data Article number: M214.151 GTIN: 4054469106854 ECLASS: 21170304 Customs tariff number: 90178090 Core technical data Measuring range: 0–180° Scale graduation: 1° Dimensions: 120 x 150 mm Diameter: 110 mm Cross-section: 12 x 2.2 mm Materials and special features Material: Steel, matt chrome-plated Locking screw Category: Angle measuring instruments FAQ How accurate is the bevel protractor for routine workshop checks? The bevel protractor M214.151 provides a readable 1° graduation, which is appropriate for standard workshop layout and inspection tasks; the locking screw helps secure settings for reproducible checks. Can the instrument withstand daily use in a fabrication environment? Yes, the matt chrome-plated steel construction of the M214.151 is designed for workshop durability and reduced glare, supporting frequent use without rapid surface wear. Is the bevel protractor suitable for tight or confined assemblies? The compact 120 x 150 mm format and slim cross-section make this angle gauge well suited to tighter assemblies where larger tools would be impractical. Does the product include any accessories or special packaging? The listing for the Metav IndustryLine bevel protractor M214.151 states the instrument and its core features; additional packaging or accessories are listed separately where applicable. Which category and SKU identify this instrument for ordering? This instrument is an angle measuring instrument (bevel protractor) available as SKU M214.151 under the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Protractor 120 x 150 mm Stainless Steel Scale Rail With Locking Screw - Metav IndustryLine
Take advantage of the combination of stainless-steel construction, a 0–180° measurement range and a secure locking screw for dependable angle layout and repeatable shop-floor results — order the instrument directly via Metav Werkzeuge or consult the team for application advice. Angle protractor, 0–180°, 120 x 150 mm, stainless steel, with locking screw — Metav IndustryLine The Angle protractor, 0–180°, 120 x 150 mm, stainless steel, with locking screw is a compact workshop protractor for precise layout, inspection and assembly tasks, designed to transfer and lock angles reliably across a range of metalworking and fabrication applications. 0–180° measurement range Stainless-steel construction Integrated mm scale on arm Locking screw for fixed readings Consistent alignment for everyday layout work The robust stainless steel body and a clear 0–180° scale make this angle instrument suitable for repetitive layout and inspection tasks where consistency matters. The flat 120 x 150 mm profile sits neatly against workpieces for secure contact, while the integrated mm scale on the arm provides an additional linear reference for positioning. Together these features reduce setup time and support accurate transfer of angles from drawings to parts. Clear graduations and secure readings reduce rework Graduated in whole degrees with an indicated reading step of 1°, the instrument gives unambiguous angle values that are quick to read and easy to verify. The slim 13 x 1.2 mm cross-section of the blade balances low weight with sufficient stiffness to resist twist during measurement, improving repeatability in routine machining and assembly. The locking screw fixes the arm in place to prevent accidental movement and ensures the chosen angle is maintained during marking or clamping. Durable design for workshop conditions Made from corrosion-resistant stainless steel, this protractor withstands regular handling and cleaning without surface degradation. The simple geometry minimises dirt traps and allows quick visual checks of the scale, supporting uninterrupted workflow in busy workshop environments. Its straightforward construction also makes it a reliable choice for bench layout, jig setup and general angle checks where a no-nonsense, long-lasting tool is preferred. Contact Metav Werkzeuge for procurement or technical guidance on application suitability and integration into production workflows — Metav IndustryLine tools are available via Metav Werkzeuge and expert advice is provided by the Metav team Technical Data SKU: M214.148 GTIN: 4054469164182 eClass: 21170304 Customs tariff number: 90178090 Facts Measurement range: 0–180° Dimensions: 120 x 150 mm Diameter: 110 mm Cross-section: 13 x 1.2 mm Graduation: 1° Special features Material: stainless steel Arm with mm scale Locking screw for fixed readings Corrosion-resistant construction FAQ How fine is the graduation on this protractor? The protractor is graduated in whole degrees with a reading step of 1°, suitable for standard layout and inspection tasks. Is the protractor suitable for use in metalworking shops? Yes — the stainless-steel construction and locking screw make the protractor well suited to general metalworking, fabrication and assembly operations. Can the instrument be used for both marking and inspection? The integrated mm scale and stable blade allow transfer of angles for marking as well as visual inspection of assembled parts. Which model and brand should be referenced when ordering? Order the Metav IndustryLine angle protractor, SKU M214.148, for workshop-grade angle layout tools. Does the arm include an additional linear scale? Yes, the arm features a millimetre scale to support positioning alongside angular measurement. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Protractor 150×200 mm Matt Chrome With Locking Screw - Metav IndustryLine
Take advantage of precise, repeatable angle measurement through the combination of a 0–180° scale, a secure locking screw, and a matt chrome-plated steel finish that reduces glare for clearer reading; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. M214.152 Bevel Protractor — 0–180°, Lockable, Matt Chrome (Metav IndustryLine) The M214.152 is a lockable bevel protractor designed for precise angle checks and setup tasks in workshop and inspection environments, featuring a clear 0–180° scale and matt chrome-plated steel construction. 0–180° scale with clear graduation Locking screw for repeatable measurements Matt chrome-plated steel finish Compact 150 x 200 mm working plate Precise, repeatable angle control for setups and inspections The bevel protractor delivers a straightforward measurement workflow based on a 0–180° graduated scale and a firm locking screw, which together guarantee repeatable settings for fixture alignment and component inspection. The graduated disc is divided in 1° steps, providing a reliable visual reference for fast checks and adjustments; this straightforward resolution suits everyday workshop tasks where rapid verification and reproducibility are required. The robust construction minimises flex under handling, so angle transfers remain consistent over time. Easier handling and faster readings reduce inspection time A compact working plate of 150 x 200 mm combined with a 12 x 2.5 mm cross-section offers a balanced mix of reach and torsional stiffness, making the instrument easy to position while resisting twist during measurement. The matt chrome finish cuts surface reflections, improving contrast on the engraved scale and enabling quicker, less error-prone readings under workshop lighting. The tool’s geometry supports common tasks such as checking mitre angles, aligning machine set-ups and verifying jig orientation with minimal secondary tools. Built for workshop durability and straightforward use Manufactured in matt chrome-plated steel, the protractor resists everyday wear and provides a tactile, corrosion-resistant surface that tolerates routine handling. Its category as an angle measuring instrument suits assembly, metalworking and inspection benches where robust, low-maintenance gauges are preferred. Clear, mechanical scale readability means no batteries or electronics are required, ensuring uninterrupted service and low ownership complexity while retaining the precision needed for production support. Contact Metav Werkzeuge today for tailored advice on integrating the M214.152 bevel protractor into production and inspection workflows — Metav Werkzeuge can confirm suitability and supply directly from Emmerich. Technical data Article number: M214.152 GTIN: 4054469106861 EClass: 21170304 Dimensions: 150 x 200 mm Measuring range: 0–180° Scale division: 1° Cross-section: 12 x 2.5 mm Material: Steel, matt chrome-plated Locking screw: Yes Tariff code: 90178090 Facts Measuring range: 0–180° Scale division: 1° Plate dimensions: 150 x 200 mm Cross-section: 12 x 2.5 mm Diameter: 140 mm Tariff number: 90178090 Special features Locking screw for repeatability Matt chrome-plated finish Steel construction for durability Category: Angle measuring instruments FAQ What measuring range does this protractor cover? The bevel protractor M214.152 from Metav IndustryLine covers a 0–180° measuring range and is intended for general workshop angle checks. How fine is the scale on this instrument? The instrument uses a 1° graduation; the clear engraving and matt chrome finish on the M214.152 support quick visual readings. Is the protractor suitable for machine set-up tasks? Yes — the M214.152 bevel protractor is designed for workshop and inspection use, offering a compact 150 x 200 mm working plate and a locking screw for repeatable setups. What materials and finish are used on the protractor? Constructed from steel with a matt chrome-plated finish, the M214.152 is built to resist reflections and routine workshop wear. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Stainless Steel Digital Protractor 120 x 150 mm Resolution 0.05° Accuracy ±15′ Hold/Zero Lock - Metav IndustryLine
Take advantage of the combination of robust stainless-steel construction, a wide 0–180° measuring range with a fine 0.05° readout and an accuracy of ±15′ for reliable alignment in production and maintenance. Order the Digital Angle Gauge directly via Metav Werkzeuge or ask our consultants if needed. Digital Angle Gauge M214.040 — stainless-steel, 0–180° with locking screw (Metav IndustryLine) A Digital Angle Gauge M214.040 designed for precise angular measurement and repeatable alignment tasks in workshops, inspection benches and assembly stations. Stainless-steel construction for durability 0–180° range with 0.05° resolution ±15′ accuracy for precise alignment Locking screw and Hold/Zero controls Robust build for dependable everyday use Constructed from stainless steel, the instrument offers corrosion resistance and a stable contact surface that maintains rigidity during routine handling. The compact plate (120 x 150 mm) and the indicated cross-section combine to provide a flat, repeatable reference that reduces the influence of flexing or chatter when measuring on machine beds or jigs. This mechanical stability translates into fewer re-checks and less downtime during setup. Fast, accurate readings to speed alignment work The gauge covers a 0–180° range with a display resolution of 0.05° and an overall accuracy of ±15′ (15 arcminutes). The digital readout, combined with functional keys — On/Off, Zero, Hold and Rev — enables quick zeroing on a reference surface, capturing a stable measurement with Hold, or reversing the display orientation for awkward positions. The locking screw secures the measured angle for subsequent transfer or clamping, making the tool well suited for both one-off adjustments and series assembly where repeatability reduces scrap. Designed to fit into workshop quality routines The instrument integrates easily into standard inspection and set-up procedures, offering a balance of portability and precision that suits maintenance technicians and quality teams alike. As part of the Metav IndustryLine range, the gauge benefits from the parent company’s focus on practical precision: fast availability from Emmerich, a broad catalogue of complementary tools and a proven supply chain that supports continuous production. The result is a tool that helps reduce inspection time while increasing confidence in alignment tasks. Contact Metav Werkzeuge for tailored technical advice or to secure the Metav IndustryLine digital angle gauge for workshop and inspection use. Technical Data Article number: M214.040 Manufacturer: Metav IndustryLine Product name: Digital angle gauge, stainless-steel Facts Measuring range: 0–180° Readout / resolution: 0.05° Accuracy: ±15′ (15 arcminutes) Dimensions: 120 x 150 mm Cross-section: 22 x 3 mm Special features Material: stainless steel Controls: On/Off, Zero, Hold, Rev Locking: locking screw for fixed readings FAQ What resolution and accuracy can be expected? The Metav IndustryLine digital angle gauge M214.040 provides a resolution of 0.05° and an accuracy of ±15′ (15 arcminutes), suitable for workshop alignment and inspection. How does the Hold and Zero function support measurement tasks? The Zero function allows setting a local reference, while Hold captures a stable reading to transfer or record; both functions on the M214.040 simplify comparative checks and angle transfer operations. Is the gauge robust enough for shop-floor use? Yes. The gauge’s stainless-steel construction and locking screw are intended to withstand routine workshop handling while maintaining repeatable reference surfaces. Can the instrument be used for bench inspection as well as machine set-up? The instrument is designed for both contexts: the plate format and digital readout suit bench inspection, while the locking screw and reverse display facilitate in-situ machine set-up. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Stainless Steel Digital Protractor 150 x 200 mm Readout 0.05°, ±15′, Locking Screw - Metav IndustryLine
The combination of stainless steel construction, a 0–180° measuring range and a fine 0.05° resolution ensures reliable angle checks and repeatable set-ups in production and inspection. Benefit from the robust locking screw and intuitive controls for fast measurements and reduced rework. Order the digital protractor directly via Metav Werkzeuge or contact our consultants for application advice. Digital angle gauge INOX, 0–180°, 150 x 200 mm — stainless steel, 0.05° resolution (Metav IndustryLine) The Digital angle gauge INOX, 0–180° is a stainless-steel digital protractor intended for precise angular measurement and alignment tasks in machine shops, fixture making and quality control. Stainless-steel construction Measuring range 0–180° 0.05° resolution and ±15′ accuracy Intuitive buttons and locking screw Precise measurements that reduce rework and scrap Built for accuracy, the instrument delivers a 0.05° resolution with a quoted accuracy of ±15′, covering a full 0–180° sweep on a 150 x 200 mm blade. This level of detail turns angular checks from informal estimates into verifiable data, making alignment tasks and setup operations more efficient. The stainless steel construction provides dimensional stability and corrosion resistance, which keeps readings consistent across shifts and environments. For production metrology, this balance of range and fine resolution reduces rework and supports repeatable quality control. Controls and handling designed for workshop efficiency The display and button layout include On/Off, Zero and Hold/Rev functions, allowing rapid zeroing and reversible readout for angular references and mirrored setups. A dedicated locking screw secures the blade once the desired angle is set, which simplifies transfer measurements and jig adjustments. These ergonomic features speed up routine tasks and lower cycle times: operators spend less time fiddling with the instrument and more time executing accurate assemblies and checks. Robust construction for everyday industrial use The device combines a compact footprint with a 22 x 3 mm cross-section blade that is robust enough for regular workshop use yet light enough for single‑handed positioning. Material choice and construction prioritise long-term stability, so calibration intervals remain practical for workshop schedules. The instrument is suitable for machine shops, toolmaking and inspection benches where reliable angular data improves process control and delivers traceable measurement records for audits. For tailored technical advice, calibration options or to request a quotation for the INOX digital angle gauge contact Metav Werkzeuge in Emmerich—call +49 2822 7131930 or email info@metav-werkzeuge.com for fast, expert assistance. Technical details Article designation: Digital angle gauge INOX, 0–180°, 150 x 200 mm with locking screw SKU: M214.041 Brand: Metav IndustryLine Material: stainless steel Cross section: 22 x 3 mm Facts Measuring range: 0–180° Resolution: 0.05° Accuracy: ±15′ Dimensions blade: 150 x 200 mm Special features On/Off, Zero, Hold/Rev buttons Locking screw for repeatable setups Corrosion‑resistant stainless steel construction Suitable for workshop alignment and inspection tasks FAQ What is the measurable angle range of this gauge? The INOX digital angle gauge offers a measuring range of 0–180°, enabling full‑sweep angle checks and transfer measurements. How fine is the resolution and what accuracy can be expected? Resolution is 0.05° with an accuracy specified at ±15′, making the instrument suited to precise alignment and inspection work. Is the device robust enough for daily workshop use? Yes. The stainless steel construction and a 22 x 3 mm blade profile provide durability and dimensional stability for regular shop tasks. Which controls aid quick measurement and setup? The gauge includes On/Off, Zero and Hold/Rev functions plus a locking screw to secure angles for transfer and jig work. What is the article number for ordering or reference? Ordering reference is M214.041 for the INOX digital angle gauge from Metav IndustryLine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
180° Stainless Steel Protractor 80x120mm With Locking Screw And mm Scale - Metav IndustryLine
Take advantage of the combination of durable stainless-steel construction, a clear 0–180° scale and a reliable locking screw to secure repeatable settings in production and inspection tasks. Order the gauge directly via Metav Werkzeuge or contact our consultants for integration advice. M214.147 Degree Gauge (0–180°) — Stainless Steel with Locking Screw by Metav IndustryLine M214.147 is a compact angle gauge designed for fast, repeatable angle setting and verification in metalworking and assembly environments Stainless-steel construction for workshop use 0–180° clear graduation for versatile angle checks Integrated mm scale on the guide rail Locking screw for secure, repeatable settings Precise angle setting and reproducible results The gauge delivers a 0–180° range with a 1° graduation, enabling straightforward visual readings for alignment, setup and quality checks. The locking screw secures the pointer after adjustment so that the set angle remains stable during transfer between workstations. Thanks to the stainless-steel construction and a compact footprint of 80 x 120 mm, the instrument provides a balance of stiffness and manoeuvrability for bench-top use. This combination reduces rework and supports predictable process outcomes in small-batch production. Robust materials that resist workshop conditions Made from stainless steel, the device resists corrosion and maintains dimensional integrity in humid or oily environments common to machine shops. The profile cross-section of 10 x 1.2 mm provides lateral stiffness while keeping the gauge light enough for handheld positioning. A pivot diameter of 74 mm and the engineered guide ensure smooth movement without play, which preserves repeatability across multiple settings and over time. The built quality lowers maintenance needs and sustains measuring performance in daily use. Practical design for setup, inspection and jigs An integrated mm scale on the guide rail extends the instrument’s usefulness beyond angle checks: it helps with positioning and basic offset measurements during fixture setup. The compact size makes the tool suitable for tight assemblies, welding fixtures and saw table alignment. The clear, graduated dial enables quick comparisons between nominal and actual angles, speeding up machine setup and reducing downtime. The gauge is therefore a practical addition to both workshop toolkits and inspection benches. Simple handling, clear readout and versatile use Ergonomic handling and a distinct scale support rapid readings under shop conditions; the readable graduations reduce interpretation time and training effort. The instrument is classified as an angle gauge and complements height gauges and callipers in a standard inspection routine. Durable materials and the locking mechanism make it a straightforward choice for repeat tasks where consistency and operational speed are priorities. For customers seeking easy integration, documentation and product guidance are available through Metav’s specialist team. For tailored technical advice or to discuss workshop integration, contact Metav Werkzeuge in Emmerich — our specialists will advise on suitability and provide further product information. Technical data SKU: M214.147 GTIN: 4054469164175 EClass: 21170304 Tariff number: 90178090 Facts Measurement range: 0–180° Overall size: 80 x 120 mm Cross-section: 10 x 1.2 mm Pivot diameter: 74 mm Graduation: 1° increments Special features Material: stainless steel Locking screw for repeatability Guide rail with mm scale Category: Angle measuring instrument FAQ What accuracy can be expected from this angle gauge? The M214.147 degree gauge offers a clear 1° graduation suitable for general workshop alignment and inspection tasks; repeatability is supported by the locking screw and robust stainless-steel construction. Is the gauge suitable for use at welding benches or near coolant? Yes, the stainless-steel construction of the M214.147 resists corrosion and is appropriate for harsher workshop environments such as welding and machining areas. How is the mm scale used in practice? The mm scale on the guide rail assists with positioning and offset measurement during fixture setup, providing a simple reference for linear adjustments alongside angle checks. Can the instrument be used for both setup and inspection tasks? The compact format and reliable locking mechanism allow the gauge to serve both setting and verification roles in production and inspection workflows. Hersteller: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2-Achsen Neigungsmesser, hohe Präzision, Winkelanzeige - Digi-Pas
Digital Precision Spirit Level (2-Axis) by Digi-Pas The Digital Precision Spirit Level (2-Axis) from Digi-Pas delivers dual-axis angle measurement and wireless data output for precise machine setup, alignment and metrology applications. Dual-axis simultaneous display for faster alignment Verified accuracy traceable to NIST, JIS & DIN Wireless Bluetooth connectivity with Smart Level App Self-calibration restores factory accuracy Includes transport case and calibration certificate Precision that keeps tolerances tight Highly accurate measurement is central to reliable machining. The Digital Precision Spirit Level offers a measuring range of 0.00° to ±5.00° (dual-axis) with a resolution down to 0.01° and accuracy of ±0.02° (80 seconds) in the critical near‑zero range. Accredited third‑party calibration and traceability to NIST, JIS and DIN ensure reproducible results across installations and inspections. This level of documented precision reduces scrap and rework by providing trustworthy reference readings during initial machine levelling and alignment. Faster alignment with two axes and wireless data Simultaneous display of both axes shortens setup times by eliminating repeated single‑axis readings. The instrument supports wireless data output and Bluetooth pairing with the Digi‑Pas Smart Level App, enabling remote reading and recording. A Bluetooth range of approximately 15 m permits safe, convenient monitoring while operators focus on mechanical adjustments. Reduced handling and simplified data capture lower training requirements and improve workflow efficiency in production and maintenance environments. Robust design and user calibration for dependable uptime Built for workshop conditions, the tool operates reliably from -10°C to +50°C and comes with a protective transport case. The integrated self‑calibration function lets users restore factory accuracy on site, while features like alternate zero and absolute level setting allow relative and symmetry measurements without complex procedures. These capabilities support sustained measurement confidence and minimise downtime caused by out‑of‑tolerance equipment. Where this instrument adds most value Applications range from levelling of milling and surface‑grinding CNC machines to alignment of Vision Measurement Equipment and precision fixtures in semiconductor fabs. Rail maintenance teams can also use the device for longitudinal and transversal profile checks. For professionals—machinists, metrologists and maintenance engineers—the instrument is a specialised tool that improves process control and contributes to higher product quality and operational safety. Digi‑Pas recommends the Digital Precision Spirit Level for precise alignment tasks — for expert advice contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271 Technical data Bezeichnung: Digital Precision Spirit Level Brand: Digi‑Pas SKU: DWL1300XY Measuring Range: 0.00° to ±5.00° (dual‑axis) Resolution: 0.01° (40 seconds / 0.18 mm/m) Accuracy: ±0.02° (80 seconds) from 0° to ±0.5°, 0.04° at other angles Operating Temperature: -10°C to +50°C Data Output: Wireless; Bluetooth connectivity approx. 15 m range Modes: Switch angle display between X & Y axis; Alternate Zero Setting; Absolute Level Setting Self‑Calibration: User self‑calibration feature to restore factory accuracy Dimensions: 149 x 51 x 40 mm Accessories included: Transport case, Calibration certificate and one code card for a single App download Application notes: Designed for CNC machine levelling, Vision Measurement Equipment setup, precision fixture alignment and rail profile checks Manufacturer: Digipas Technologies Inc.; 200 Spectrum Center Drive, Suite 300; Irvine, CA 92618; United State of America; info@digipas.com FAQ What is the main advantage of the Digital Precision Spirit Level by Digi‑Pas? The Digi‑Pas Digital Precision Spirit Level (2‑Axis Digital Precision Spirit Level) provides simultaneous dual‑axis readings and accredited accuracy traceable to NIST, JIS and DIN, which speeds up alignment and increases confidence in critical setups. Can the Digital Precision Spirit Level connect to mobile devices? Yes, the Digi‑Pas Digital Precision Spirit Level supports wireless data output and Bluetooth pairing with the Digi‑Pas Smart Level App; one complimentary app redemption code is provided with the instrument. How does self‑calibration work on the Digi‑Pas instrument? The Digital Precision Spirit Level includes an easy user self‑calibration routine that allows the operator to reset the device to factory‑preset accuracy, ensuring consistent measurement performance without return to the calibration lab. Is the Digital Precision Spirit Level suitable for machine tool alignment? Absolutely — the Digi‑Pas 2‑Axis model is designed for levelling and alignment tasks on milling and surface‑grinding CNC machines, ensuring tables and fixtures meet tight tolerances for precision machining. METAV Werkzeuge offers comprehensive, expert consultation for this product. If you are unsure whether this tool meets your requirements or need additional technical data, please contact METAV Werkzeuge for support. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271
2-Achsen Neigungsmesser, PC-ABS und Aluminium, präzise Winkelmessung - Digi-Pas
Precision spirit level with 2-axis by Digi-Pas The Precision spirit level with 2-axis is a high-accuracy dual-axis digital level designed for angle, alignment and vibration measurement in precision installation and machine setup. Dual-axis digital display for instant alignment Resolution of 0.001° for ultra-fine adjustment Real-time USB or Bluetooth data transfer Colour TFT-LCD for clear graphical readouts Includes calibration certificate and base software Faster, more reliable alignment for precision work The dual-axis design delivers simultaneous X/Y readings so a single operator can achieve correct alignment quickly. With a resolution of 0.001° and graphic numeric output, the device reduces setup time and repeat adjustments. This capability is especially valuable when aligning CNC milling and grinding machines where even minute angular errors affect part quality. The immediate visual feedback on the colour TFT-LCD helps make adjustments measurable and reproducible. Clear measurement data and remote monitoring for consistent results A clear graphic display shows angle and vibration diagrams in real time, while USB and optional Bluetooth connectivity enable remote data capture. The included base PC software allows logging and basic analysis, and an expert software edition is available for advanced evaluation. Remote synchronisation means alignment tasks can be monitored from a tablet or laptop, improving documentation and traceability during machine commissioning and maintenance. Built for industrial environments and specialised applications Constructed from PC‑ABS and Aluminium, the instrument withstands workshop conditions and supports inspection tasks across industries, including semiconductor fabrication, large-format printing and railway maintenance. The integrated vibration sensor extends utility beyond simple levelling by enabling preventive monitoring of machine dynamics. This combination makes the tool suitable for engineers responsible for installation, calibration and ongoing performance checks of sensitive equipment. Simple concepts explained and practical user benefits The feature “offset zero” allows setting a custom reference angle to measure differences between surfaces, simplifying comparative checks. “Absolute levelling test” verifies measurement symmetry by flipping the unit 180°, ensuring reliability of results. These user-focused functions convert technical readings into actionable steps: calibrate, align, verify and document — all with a single instrument and minimal training. Recommended for professionals who demand reproducible precision — contact METAV Werkzeuge for tailored advice by email, phone or WhatsApp: info@metav-werkzeuge.com · +49 2822 7131930 · WhatsApp +49 170 2837271 Bezeichnung: Precision spirit level with 2-axis Marke/Hersteller: Digi-Pas SKU: DWL3500XY Material: PC‑ABS and Aluminium Dimensions: 188 x 62 x 37 mm Power supply: 4 × AAA batteries (included) Measurement range: 0° ~ ±20,000° (single axis); 0° ~ ±10,000° (dual axis) Resolution: 0.001° (0.02 mm/M) Accuracy: ±0.001° from 0° to ±2,000°; ±0.003° at other angles Display: Colour TFT-LCD with digital and analogue graphics Data output: USB (cable 5 m) and Bluetooth (wireless optional) PC synchronisation: Base software included; Expert software optional Accessories included: Calibration certificate, USB cable and base software Operating temperature: −10 °C to +50 °C Features: Dual-angle graphic display, built-in vibration sensor, offset zero, absolute levelling test Manufacturer: Digipas Technologies Inc.; 200 Spectrum Center Drive, Suite 300; Irvine, CA 92618; United State of America; info@digipas.com FAQ What is the main advantage of the Precision spirit level with 2-axis from Digi-Pas? The Precision spirit level with 2-axis by Digi-Pas combines a dual-axis graphic display with 0.001° resolution and an integrated vibration sensor, enabling fast, reproducible alignment and condition monitoring during machine installation and setup. Can the device send measurement data to a PC or tablet? Yes, the Digi-Pas Precision spirit level with 2-axis supports USB data transfer for direct logging and offers optional Bluetooth wireless synchronisation; base PC software is included and an expert edition is available for extended analysis. Is the Precision spirit level suitable for CNC machine alignment and calibration? The instrument was developed for installation and maintenance of high-precision CNC machines and coordinate measurement equipment, providing the resolution and functions needed for accurate machine levelling and performance verification. What accessories are supplied with the Precision spirit level with 2-axis? Delivery includes a calibration certificate, USB cable and base software to enable immediate data capture and documentation for quality assurance tasks. Need help deciding if this tool meets your requirements? If you are unsure whether the Digi-Pas Precision spirit level with 2-axis fits your application or if additional technical data is needed, METAV Werkzeuge offers expert consultation — contact info@metav-werkzeuge.com, call +49 2822 7131930 or use WhatsApp +49 170 2837271.
200 mm Digital Spirit Level 0.02 mm/m, Tilt Direction Bar Rotatable Readout, Cast Iron Frame - Metav IndustryLine
Benefit from robust construction and precise digital measurement: the 200 mm spirit level combines a cast-iron frame with a rotatable digital readout and a fine 0.02 mm/m slope resolution for repeatable alignment results. Order the Digital spirit level M215.301 directly via Metav Werkzeuge or ask our consultants if further specification advice is required. M215.301 Digital spirit level — 200 mm, cast-iron frame, rotatable digital display A M215.301 Digital spirit level for precise angle and slope measurement in workshops, assembly and installation tasks Digital display with On/Off, M and HOLD buttons Cast-iron frame for high stability Resolution 0.02 mm/m for precise slope checks Angular accuracy 0.002° for fine alignment Reliable readings for accurate alignment The instrument delivers measurably better alignment thanks to a digital display that shows readings in degrees or in mm/m, making comparative levelling and setting slopes straightforward. With a resolution of 0.02 mm/m and an angular reading granularity of 0.001°, the unit supports fine adjustments where millimetre-level gradients matter. The stated angular accuracy of 0.002° translates into consistent orientation checks on machine set-ups and installation frames, reducing rework and alignment time. Explanations of units: mm/m expresses vertical deviation per metre run, while degrees indicate absolute inclination. Stiff frame reduces measurement variability Built around a cast-iron frame, the level resists flex and vibration that would otherwise introduce measurement error, particularly on longer spans or heavier fixtures. The robust construction contributes to a total weight of 1.6 kg, offering a stable contact surface without becoming cumbersome for site work. The compact overall dimensions (200 x 50 x 60 mm) balance reach and rigidity so the tool sits flat and reproducible on machined faces and installation rails, helping to preserve measurement integrity across repeated checks. Practical controls and site-ready display Operation is kept efficient through the simple control set: On/Off plus M and HOLD for memory or freezing a reading. The rotatable readout simplifies viewing when the level is used in different orientations, and the integrated tilt direction bar provides rapid visual confirmation of slope direction before fine digital adjustments are made. Power is supplied by 3x AAA batteries, which are widely available and easy to replace, minimizing downtime between jobs. The display mode selection between degrees and mm/m supports compatibility with different engineering workflows. Where this level fits into a production workflow Designed for workshops, maintenance teams and fitters, the device is classed among professional angle measuring instruments for everyday industrial use. It is suitable for machine set-up, conveyor alignment, frame and fixture levelling, and other tasks where reliable incline measurement is required without the complexity of larger digital inclinometers. The compact footprint makes it convenient for bench and on-site checks while the solid frame ensures durability in an industrial environment. Delivered with established Metav IndustryLine quality assurance, the level is positioned as a dependable measuring partner for standard and precision tasks. Choose the Metav IndustryLine spirit level for dependable alignment work and contact Metav Werkzeuge in Emmerich for tailored technical advice by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M215.301 GTIN: 4054469184692 Manufacturer: Metav IndustryLine SKU: M215.301 Facts Total length: 200 mm Dimensions: 200 x 50 x 60 mm Weight: 1.6 kg Measurement range: 0–90° / 999.99 mm Resolution (slope): 0.02 mm/m Angular reading: 0.001° Angular accuracy: 0.002° Power: 3x AAA batteries Digital display with On/Off, M and HOLD Special features Cast-iron frame Rotatable readout Tilt direction bar Readout in degrees or mm/m Category: Angle measuring instruments FAQ How is slope shown and what units are available? The level provides readings both in degrees and in mm/m; the M215.301 can be switched between units on the digital display to match the measurement convention required for the task. What accuracy and resolution can be expected for fine adjustments? The instrument offers a resolution of 0.02 mm/m and an angular reading of 0.001°, with an angular accuracy of 0.002°, suitable for precise alignment and installation tasks. Is the display usable in tight positions or rotated orientations? Yes, the M215.301 features a rotatable readout and a tilt direction bar to ensure legible results and quick orientation checks even in confined mounting situations. What powers the unit and how easy is battery replacement? Power is supplied by three AAA batteries; replacement is straightforward and uses commonly available cells to reduce interruption during on-site work. Which environments and tasks are most suitable for this instrument? This digital spirit level is intended for workshop alignment, machine set-up, fitting and installation tasks where reliable angle and slope measurement supports quality and repeatability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 mm Frame Level 0.3 mm/m Prismatic Bases, Painted Grey Cast Iron, Wooden Case - Metav IndustryLine
Take advantage of the combination of 200 mm measuring length, 0.3 mm/m accuracy and a prismatic base for repeatable alignment and fast set-up in machine and fixture work. Order the frame spirit level directly via Metav Werkzeuge or ask our consultants if needed. Frame spirit level M215.172 — 200 mm, 0.3 mm/m (Metav IndustryLine) The Frame spirit level M215.172 is a compact alignment instrument for precise horizontal and vertical levelling in machine assembly, jig set-up and workshop inspection tasks. High accuracy 0.3 mm/m 200 mm rigid frame for repeatable use Painted grey cast iron construction Prismatic base with longitudinal and transverse vial Precise alignment in a compact format The solid frame and the specified 0.3 mm/m accuracy deliver measurable advantages when aligning machines or verifying fixtures. The short, rigid geometry reduces torsion and bending, so readings remain stable during handling. A 200 mm measuring length balances reach and stiffness: long enough for meaningful reference lines yet compact for easy positioning on smaller machine beds or tool holders. The integrated vials provide both longitudinal and cross-axis indication for two‑plane alignment tasks. Robust construction for reproducible results Built from grey cast iron with a painted finish, the instrument resists everyday workshop wear while maintaining its geometric stability. The prismatic base provides a stable contact on cylindrical profiles and edges, increasing repeatability when checking shafts, spindles or round housings. The frame design minimises deformation under typical use, so subsequent adjustments are based on reliable reference values rather than transient deflections. Practical features that speed up workflows The combination of a rigid frame and clearly readable vials shortens setup time during repetitive alignment operations. The instrument’s design focuses on quick placement, visual clarity and mechanical stability, which reduces rework and idle time on the production floor. Where quick verification is required before a machining step, the instrument serves as a dependable reference that supports efficient, documented workflows. Contact Metav Werkzeuge in Emmerich for tailored advice on the M215.172 frame spirit level — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com to discuss suitability for specific machine alignment tasks Technical Data Article number: M215.172 GTIN: 4054469109916 eClass: 21160113 ETIM: EC000145 Key figures Measuring length: 200 mm Accuracy: 0.3 mm/m Dimensions: 200 x 200 mm Tariff number: 90153090 Materials & features Material: grey cast iron, painted Prismatic base Longitudinal and transverse vial Manufacturer: Metav IndustryLine FAQ What is the levelling accuracy of the frame spirit level? The M215.172 frame spirit level provides an accuracy of 0.3 mm per metre, suitable for routine machine alignment and fixture checks. Which measuring length does this instrument offer? The instrument is specified with a 200 mm measuring length (M215.172), offering a balance between reach and rigidity. Is the base suitable for use on round or cylindrical surfaces? Yes, the prismatic base on the M215.172 is designed to seat securely on cylindrical profiles for stable readings. What material is the frame made from? The M215.172 is constructed from painted grey cast iron, chosen for geometric stability and resistance to workshop conditions. Is calibration information provided with the product data? No calibration certificate or standard is specified in the available product data for the M215.172 Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 mm Frame Precision Level With Two Prismatic Vials, 0.1 mm/m DIN 877 - Metav IndustryLine
Rely on the combination of 0.1 mm/m accuracy, a sturdy grey cast iron frame and simple adjustability for consistently reproducible alignment results; order the instrument directly via Metav Werkzeuge or consult their specialists for application advice. Frame spirit level M215.184 — Metav IndustryLine frame spirit level, 200 mm, 0.1 mm/m accuracy A Frame spirit level M215.184 built for precise alignment tasks in workshops and on-site assembly, offering standard-compliant performance and secure positioning for round and flat components Precise 0.1 mm/m accuracy 200 mm robust frame length Grey cast iron for thermal stability Prismatic base for secure positioning Reliable alignment for machines and components The instrument delivers a measured reading of 0.1 mm/m, meeting the typical sensitivity required for alignment jobs where small deviations matter. Compliance with DIN 877 ensures that the device can be used as a reference in routine setup and inspection tasks, offering a reproducible basis for machine alignment or fixture levelling. The compact 200 mm frame provides a balance of reach and rigidity, enabling fast checks without the bulk of longer gauges; this saves time during setup and supports consistent results across multiple measuring points. Robust construction reduces measurement drift Constructed from grey cast iron, the frame resists thermal distortion and dampens vibration, which improves repeatability when measurements are taken over time or in less-than-ideal environments. The instrument features prismatic base surfaces that stabilise contact on cylindrical and irregular parts, preventing slippage during readings. An adjustable mechanism allows fine truing of the vial alignment, so the reference stays accurate after transport or rough handling. Together, these characteristics reduce rework and downtime by helping users establish reliable references quickly. Ready for workshop use and transport Delivery in a protective case supports safe storage and transport, keeping the instrument ready for frequent job-site use. The simple adjustment feature enables quick recalibration on the bench so the device is operational almost immediately after unpacking. Backed by Metav IndustryLine’s quality control in Emmerich, the tool forms part of a supply concept that prioritises dependable performance for industrial and workshop customers, providing a practical mix of durability and usability for everyday alignment work. For precise alignment tasks choose the Metav IndustryLine frame spirit level and contact Metav Werkzeuge to discuss application details or to arrange supply—call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice. Technical data SKU: M215.184 GTIN: 4061905450143 Material: Grey cast iron Standard: DIN 877 Reading: 0.1 mm/m Dimensions: 200 x 200 mm Special feature: simply adjustable Facts Effective length: 200 mm Reading increment: 0.1 mm/m Special features Prismatic base surfaces Two prismatic support surfaces Delivered in protective plastic or wooden case for transport Simple adjustability for vial alignment FAQ What is the measurement accuracy of this frame spirit level? The frame spirit level provides an accuracy of 0.1 mm/m as specified for the M215.184, suitable for standard alignment and levelling tasks. Is the instrument suitable for aligning cylindrical shafts and round bars? Yes. The prismatic base surfaces on the M215.184 secure contact with cylindrical components, improving positional stability during readings. Does the device comply with industry standards? The instrument is manufactured to meet DIN 877 requirements, ensuring conformity with common workshop and inspection standards. How is the spirit level delivered and protected in transit? The M215.184 is supplied in a protective plastic or wooden case to safeguard the instrument during transport and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 mm Frame Spirit Level 0.02 mm/m Special Cast Iron With Two Prismatic Bases, Supplied In Case - Metav IndustryLine
Take advantage of the combination of high alignment precision, robust cast‑iron construction and clear prismatic seating for reliable, repeatable set‑ups; order directly via Metav Werkzeuge or contact our consultants for specification advice. Precision frame level M215.112 — 200 mm, 0.02 mm/m accuracy (Metav IndustryLine) Precision frame level M215.112 is a compact 200 mm frame alignment level designed for workshop and assembly applications where fine angular control and repeatability are required 200 mm cast‑iron frame for stability Accuracy 0.02 mm/m for fine alignment Two prismatic bases for secure seating Longitudinal and transverse vials for quick checks Durable frame construction for reproducible alignment The grey cast‑iron body is painted for corrosion resistance and provides a stable, vibration‑damping platform that minimises thermal and mechanical distortion during routine checks. This inherent rigidity reduces the need for repeated re‑adjustment and supports consistent alignment whenever fixtures or machine beds are reset. For production environments where repeatability matters, the combination of mass and form delivers a reliable reference that shortens set‑up time and lowers the risk of rework. High‑resolution indication and secure contact features With a specified reading of 0.02 mm/m, the instrument offers fine sensitivity for alignment work on shafts, bearing housings and machine frames. The pair of prismatic bases ensures secure contact with cylindrical surfaces, while the integrated longitudinal and transverse vials allow rapid assessment of tilt in two axes without repositioning the tool. These characteristics turn a single reference instrument into a practical aid for machine alignment, conveyor levelling and precision assembly tasks that demand both speed and measurable accuracy. Practical dimensions and straightforward workshop use The compact footprint of 200 x 200 mm balances reach and handling: large enough to span typical bearing seats and small enough for one‑person manipulation in confined spaces. The instrument’s geometry and prismatic seating support repeatable placement against round and flat profiles, making it suitable for maintenance teams and toolroom technicians who require a dependable, low‑maintenance reference. Backed by Metav IndustryLine’s portfolio, the device integrates into a workflow where transparency of supply and consistent availability matter just as much as measurement performance. Contact Metav Werkzeuge for tailored application advice and to arrange supply of the Metav IndustryLine precision frame level M215.112 from Emmerich Technical data Article number: M215.112 GTIN: 4054469109787 ECLASS: 21160113 ETIM: EC000145 Customs tariff number: 90153090 Facts Reading / indication: 0.02 mm/m Dimensions: 200 x 200 mm Category: Angle measuring device / frame level SKU: M215.112 Special features Material: grey cast iron, painted Two prismatic bases for cylindrical contact Longitudinal and transverse vials for 2‑axis checks Suitable for workshop and assembly alignment tasks FAQ What level of accuracy does this frame level provide? The Metav IndustryLine precision frame level M215.112 specifies a reading of 0.02 mm/m, making it suitable for fine alignment and reproducible angular checks in workshop environments. Which surfaces can be measured with the prismatic bases? The two prismatic bases on the precision frame level M215.112 are designed for secure seating on cylindrical and round profiles, enabling reliable alignment of shafts and bearing housings. Is the instrument suitable for daily workshop use? Yes; the combination of a grey cast‑iron frame and clear longitudinal and transverse vials makes the device robust and practical for regular maintenance and assembly tasks. What are the physical dimensions and how does that affect handling? The frame measures 200 x 200 mm, offering a compact footprint that balances reach with ease of handling for one‑person operation in confined or crowded areas. Which product category does this instrument belong to? This item is classified as an angle measuring device / frame level and is intended for alignment and levelling tasks in machine shops and assembly lines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 mm Frame Spirit Level, 0.1 mm/m Accuracy, Prismatic Soles, Painted Grey Cast Iron, Supplied in Case - Metav IndustryLine
Take advantage of the combination of high repeatability, robust special cast iron construction and practical transport protection for consistent alignment work in production and assembly. Order the instrument directly via Metav Werkzeuge or consult our specialists if clarification is required. Frame spirit level M215.152 — 200 mm, 0.1 mm/m, Metav IndustryLine The M215.152 frame spirit level is a compact alignment instrument designed for precise straightness and angle setup in machine shops and assembly areas with a 200 mm frame length. 200 mm measuring length Accuracy 0.1 mm/m Special cast iron construction Delivered in a transport case Precise alignment from a stable frame Built as a compact frame spirit level, the instrument provides a clearly stated accuracy of 0.1 mm/m, making it suitable where reproducible straightness references are required. The short, rigid frame minimises twist and thermal distortion; this mechanical stability translates directly into dependable readings during machine set-ups, jig adjustment and primary alignment tasks. The 200 mm span places the instrument in the standard workshop category, offering an efficient balance between reach and stiffness for everyday metrology work. Robust materials and practical transport protection The main body is made from grey cast iron, painted, which provides inherent damping and structural stiffness for repeatable measurements. Because the unit is supplied in a transport case, handling between the toolroom and the machine floor is simplified and the instrument stays protected against impact and contamination during transit. The combination of robust material and secure packaging reduces the likelihood of service interruptions caused by accidental damage and preserves calibration integrity over time. Designed for workshop alignment and angle work Equipped with prismatic seating and an engineered base geometry, the level serves as a reliable reference for establishing straight edges, checking machine beds and setting up fixtures. The prismatic features aid secure placement on cylindrical or uneven surfaces while the clear graduation of the vial supports quick, rational decision-making during alignment procedures. This design reduces racking and repositioning time, increasing throughput in maintenance and set-up routines. Why choose this Metav IndustryLine instrument Metav IndustryLine provides a quality filter for the European market: broad product availability from Emmerich, a long-standing catalogue of precision tools and a practical logistics set-up for industry and trade. Selecting this frame level from the brand means investing in an instrument that pairs measurable performance with straightforward workshop usability; the construction and packaging choices help sustain long-term reliability and lower total operating costs through reduced downtime. Contact Metav Werkzeuge for precise availability and technical advice from Emmerich—ask for the M215.152 frame spirit level and discuss delivery or application-specific requirements Technical Data Article number: M215.152 GTIN: 4054469109848 ECLASS: 21160113 ETIM: EC000145 Customs tariff number: 90153090 Facts Reading / resolution: 0.1 Frame dimension: 200 x 200 mm Category: Angle measuring instruments Special features Material: grey cast iron, painted Accuracy: 0.1 mm/m Two prismatic feet for secure seating Supplied in a transport case Suitable for workshop alignment and angle set-up FAQ What is the stated accuracy of this frame spirit level? The frame spirit level M215.152 is specified with an accuracy of 0.1 mm/m, giving a precise reference for straightness and alignment tasks. Which length category does the instrument belong to? With a 200 mm frame dimension, the instrument falls into the standard workshop category (100–300 mm), offering a practical balance of reach and stiffness. What material is used for the body and why does it matter? The body is made from grey cast iron, painted; this material provides structural stiffness and damping, which help to maintain stable, repeatable measurements. Is a protective case included with the delivery? Yes, the level is supplied in a transport case to protect the instrument during handling and transit, reducing the risk of damage. Can the level be used on cylindrical surfaces? The design includes prismatic seating that aids stable placement on cylindrical or irregular profiles, improving measurement reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 mm Frame Straightedge 0.02 mm/m Prism Base, Special Grey Cast Iron, DIN 877, Supplied in Case - Metav IndustryLine
Take advantage of precise angular reference, robust cast-iron stability and straightforward adjustment for reliable machine set-up and inspection routines; order the frame alignment level directly via Metav Werkzeuge or consult our specialists for application advice. M215.182 Frame alignment level — 200 mm, 0.02 mm/m (Metav IndustryLine) The M215.182 is a 200 mm frame alignment level designed for accurate angular alignment and reference measurements in machine shops, assembly jigs and inspection benches. High accuracy 0.02 mm/m Robust grey cast iron construction Complies with DIN 877 Easily adjustable alignment system Two prismatic supports for secure seating Precise alignment that speeds up set-up and inspection The frame alignment level delivers repeatable angular references with a stated sensitivity of 0.02 mm/m, allowing technicians to detect very small deviations over long runs. Built to the DIN 877 standard, this instrument provides a measurable basis for quality assurance and machine alignment tasks, reducing rework and downtime. The solid design and fine sensitivity mean the tool acts as a reliable baseline for aligning spindles, fixtures and machine bases without the ambiguity of less precise gauges. Solid construction for stable, vibration-resistant readings Constructed from grey cast iron, the alignment frame offers inherent mass and damping that stabilise readings during shop-floor use. The prismatic seating—provided as two prismatic supports—ensures secure contact on cylindrical or flat reference surfaces, while the integrated longitudinal and cross vials make both pitch and roll checks straightforward. These features combine to deliver a stable reference that is less affected by minor knocks or machine vibration, helping teams keep set-ups on tolerance. User-focused adjustment and practical benefits in the workshop The instrument is easily adjustable, enabling quick levelling and fine corrections without specialised tools. This practical adjustability shortens set-up times and supports iterative workflows in jigs and fixtures. Beyond accuracy, the frame’s layout and markings promote efficient measurement routines: operators can establish a reference, verify alignment across multiple points and proceed to machining or assembly with confidence. The overall effect is a smoother production flow and fewer interruptions for recalibration. Contact Metav Werkzeuge for application guidance and to secure the M215.182 from stock in Emmerich — expert advice and prompt dispatch available for professional users Technical data Article number: M215.182 GTIN: 4061905450129 ECLASS: 21160113 Facts Measuring length: 200 mm Reading/accuracy: 0.02 mm/m Dimensions (footprint): 200 x 200 mm Category: Angle measuring device Special features Material: grey cast iron Standard: DIN 877 Adjustment: easily adjustable alignment system Seating: two prismatic supports Application: machine alignment, reference checks, inspection FAQ What accuracy can be expected from this alignment frame? The M215.182 frame alignment level provides an indicated accuracy of 0.02 mm/m, suitable for precise angular checks and alignment tasks in production and inspection environments. Is the M215.182 suitable for use on cylindrical and flat surfaces? Yes — the instrument is equipped with two prismatic supports to secure seating on cylindrical components and flat faces, enabling flexible reference placement. What material is the frame made from and why does that matter? The frame is made from grey cast iron, chosen for its mass and damping properties which improve reading stability and resistance to minor shop-floor disturbances. Does the tool conform to any standards? This alignment frame is manufactured to meet DIN 877, providing a recognised baseline for accuracy and reference use in industrial settings. How is adjustment handled on the alignment frame? Adjustment is designed to be straightforward and easily adjustable, allowing technicians to level and fine-tune the reference quickly without specialised equipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 mm Frame Straightedge Level 0.3 mm/m, Prism Base, Special Grey Cast Iron, DIN 877, Packaged Case - Metav IndustryLine
Take advantage of the combination of precise sensitivity, robust grey cast iron construction and simple adjustability for dependable alignment results; order the M215.187 directly via Metav Werkzeuge or ask our consultants if needed. M215.187 Frame Precision Level, 200 mm, 0.3 mm/m (Metav IndustryLine) A frame precision level designed for accurate alignment and levelling tasks in workshops and production, combining a compact 200 mm frame with a sensitive 0.3 mm/m vial and a prismatic base for secure seating. 200 mm frame for precise levelling 0.3 mm/m sensitivity following DIN 877 Prismatic base for secure seating Grey cast iron body, simply adjustable Accurate alignment for machine setup and calibration The 0.3 mm/m sensitivity specified to DIN 877 ensures visibly finer adjustments than typical coarse levels, making the instrument suitable for machine bed levelling, jig set-up and alignment of guideways. This sensitivity translates into straightforward comparisons across a reference length and supports consistent repeatability in daily inspection routines. The compact 200 mm frame keeps handling nimble while still providing a usable span for aligning smaller assemblies, helping to reduce setup time and minimise production rejects. Stable construction that reduces measurement uncertainty Manufactured from grey cast iron, the frame offers inherent damping and dimensional stability that benefits repeat measurements under workshop conditions. The special casting process provides a rigid profile that resists twist and bend, preserving the precision of the vial over time. The instrument is simply adjustable, allowing fine calibration of the vial seating without complex tooling; this reduces downtime and maintains consistent results between checks. Taken together, these attributes support dependable levelling that lowers the need for repetitive corrective work. Practical features for everyday workshop use A prismatic base and the inclusion of longitudinal and transverse vials make the instrument versatile for seating on round, angled or flat surfaces, enabling both crosswise and lengthwise levelling with one tool. The compact footprint (200 x 200 mm) suits bench work as well as in‑situ adjustments on machines and fixtures. Built to the DIN 877 standard, the frame level fits into established metrology workflows and inspection plans, offering a pragmatic balance of sensitivity and robustness for production environments and service workshops. Contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the M215.187 frame level and its suitability for specific alignment tasks Technical data Article number: M215.187 GTIN: 4061905450167 ECLASS: 21160113 Designation: Frame precision level, 200 mm, 0.3 mm/m, DIN 877 Facts Measuring length: 200 mm Sensitivity / reading: 0.3 mm/m Dimensions: 200 x 200 mm Special features Material: Grey cast iron Prismatic base for secure seating Longitudinal and transverse vials included Simply adjustable vial seating Conforms to DIN 877 FAQ What sensitivity does the instrument provide? The frame level offers a sensitivity of 0.3 mm/m, allowing fine levelling adjustments in line with DIN 877 requirements for precise workshop alignment. Which surfaces can it be used on? The prismatic base makes the instrument suitable for flat, cylindrical and angular surfaces; both longitudinal and transverse vials enable crosswise and lengthwise levelling. Is the level suitable for machine bed alignment? Yes — the combination of a rigid cast‑iron frame and 0.3 mm/m sensitivity makes the M215.187 appropriate for machine bed and guideway levelling tasks. How is the vial adjusted if recalibration is required? The vial seating is simply adjustable, permitting straightforward realignment without specialised equipment, which helps maintain measurement reliability. Which standard does the instrument comply with? The frame precision level is produced to DIN 877, ensuring compatibility with standard levelling and inspection procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 mm Guide Rail For Universal Angle Measuring Device Without Packaging - Metav IndustryLine
Take advantage of a compact replacement rail that brings repeatable angle measurement, a stiff 16×2.5 mm profile and lightweight handling to routine metrology tasks; the rail's simple geometry reduces setup time and supports stable readings. Order the rail directly via Metav Werkzeuge or ask our consultants if needed. 200 mm rail for TOP universal angle measuring instrument (without packaging) — 16×2.5 mm profile, Metav IndustryLine The 200 mm rail for TOP universal angle measuring instrument is a precision replacement component intended for angle alignment and measurement in industrial metrology applications, offering a compact profile for confined fixtures and repeatable positioning. 200 mm precision measurement rail 16 × 2.5 mm cross-section profile Lightweight: approx. 0.1 kg for easy handling Compatible with TOP universal angle instrument Stable reference for repeatable angle checks The 200 mm measuring rail serves as a short, rigid reference that minimises deflection during use, which is crucial for repeatable angle checks in production and inspection. Its compact length reduces lever arms and improves the stability of the measurement chain, so readings can be relied on for pass/fail decisions in assembly and jig alignment. Profile design that resists bending and wear The 16×2.5 mm cross-section is selected to deliver a stiff yet slim bearing surface that resists twisting under clamping or light handling. This profile reduces measurement uncertainty caused by deformation and ensures the rail retains its straightness over repeated cycles, supporting consistent angular alignment in jigs and fixtures. Low mass for straightforward installation and handling At approximately 0.1 kg, the component is intentionally lightweight to ease positioning during tool changes and to reduce strain during installation in compact setups. The low mass simplifies single-person handling and helps maintain alignment when mounted to portable or temporary setups. Designed for straightforward integration with TOP systems Engineered as a direct fit for TOP universal angle instruments, the rail allows rapid exchangeability on machines and test rigs. The defined geometry and mounting references support fast replacement, enabling maintenance cycles to be completed with minimal machine downtime and without complex readjustment. Practical benefits for workshop throughput Using a standard replacement rail reduces the time spent on re-levelling and recalibration after component swaps. The uncomplicated form factor supports faster process recovery after wear or damage and stabilises inspection workflows, contributing to improved overall equipment effectiveness (OEE). Reliable sourcing and clear identification The component is supplied with manufacturer identification and catalogue references for traceability, making stock management and reorder straightforward. As part of the Metav IndustryLine range, the rail benefits from the supplier’s quality filter for European distribution and logistical support from Emmerich. Contact Metav Werkzeuge for a compatibility check or a tailored delivery proposal for this Metav IndustryLine 200 mm rail — expert advice is available by phone at +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com Technical Data Article number: M214.098.2 GTIN: 4061905053658 Facts Length: 200 mm Cross-section: 16 × 2.5 mm Weight: 0.1 kg Special features Compatible with TOP universal angle instrument Delivered without packaging FAQ Is this rail compatible with TOP universal angle instruments? The rail is supplied as a direct replacement rail compatible with TOP universal angle measuring instruments and intended for straightforward interchange. Does the component arrive packaged? This item is delivered without packaging, supplied as the rail only to simplify storage and to reduce packaging waste. What are the rail's main dimensions? Length is 200 mm with a cross-section of 16 × 2.5 mm; weight is approximately 0.1 kg. How is the item identified for reordering? The component is stocked under the article number M214.098.2 and GTIN 4061905053658 for clear traceability and replenishment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 mm Precision Level with Prismatic Base, 0.1 mm/m, DIN 877, Special Cast Iron, Adjustable, Supplied in Case - Metav IndustryLine
Take advantage of the blend of high accuracy (0.1 mm/m), DIN 877 conformity and an adjustable, prismatic base for reliable alignment in workshop and inspection environments — order the precision spirit level directly via Metav Werkzeuge or consult our advisers for detailed application support. Precision spirit level M215.135 (200 mm) – 0.1 mm/m, DIN 877, Metav IndustryLine The Precision spirit level M215.135 is a compact, DIN‑877‑compliant alignment tool designed for stable seating and accurate levelling in machine shops, jigs and inspection benches. DIN 877 accuracy 0.1 mm/m Prismatic base for stable seating Easily adjustable vial Grey cast iron body for long service Consistent readings that reduce rework and setup time The level’s certified 0.1 mm/m accuracy under DIN 877 delivers measurable benefits for workshop and production use: faster setup, fewer iterative adjustments and a reduced risk of rejected parts. The engraved vial markings and the adjustable vial enable fine correction of the bubble position, so alignment tasks become repeatable. By relying on a standardised tolerance, measurement routines and quality documentation integrate cleanly into existing inspection processes. Robust design for reproducible alignment across operations Constructed from grey cast iron, the tool offers thermal stability and vibration damping that support repeatable readings in everyday industrial environments. The prismatic base provides a defined seating on cylindrical and flat surfaces, improving contact stability and preventing lateral slip during measurement. Such mechanical consistency preserves calibration intervals and prolongs usable life, making the instrument a dependable choice where long‑term dimensional control is required. Practical handling and straightforward maintenance At 200 mm overall length the level balances reach and manoeuvrability for bench and machine tasks. The body is simply maintained and the easily adjustable vial means recalibration can be performed quickly on site without specialist tools. For applications requiring clear standards, the device’s DIN 877 conformity simplifies acceptance in production control documents. For bespoke requirements or integration into inspection routines, technical guidance is available from Metav’s specialists. Choose Metav IndustryLine’s precision spirit level for dependable alignment and contact Metav Werkzeuge for application advice and supply direct from Emmerich. Technical data Article number: M215.135 GTIN: 4054469182629 Standard: DIN 877 Category: Angle measuring devices Facts Length: 200 mm Accuracy: 0.1 mm/m Reading resolution: 0.1 mm/m Special features Material: Grey cast iron Prismatic base for stable seating Easily adjustable vial Prism face for improved contact FAQ What accuracy can be expected from this level? The precision spirit level M215.135 achieves an accuracy of 0.1 mm/m in accordance with DIN 877, which suits routine alignment and inspection work in workshops and production. Is the vial adjustable and serviceable? Yes, the instrument features an easily adjustable vial, allowing precise recalibration and straightforward maintenance without specialised equipment. Which materials and surfaces is the base suited to? The prismatic base is designed for secure seating on both flat and cylindrical parts, while the grey cast iron construction ensures dimensional stability under normal workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 mm Precision Spirit Level 0.02 mm/m Prismatic Base, DIN 877, Cast Iron, Adjustable, Packaged in Case - Metav IndustryLine
Take advantage of a compact 200 mm span combined with 0.02 mm/m sensitivity and a prismatic seating made from special grey cast iron for reliable machine alignment; order the precision spirit level directly via Metav Werkzeuge or consult our specialists for application advice. M215.132 — Precision spirit level, 200 mm, 0.02 mm/m (DIN 877) The M215.132 is a precision alignment level designed for accurate levelling and alignment tasks in machine shops and fixture setups, compliant with DIN 877. 200 mm measuring span for workshop use 0.02 mm/m high-precision sensitivity Prismatic base for secure contact Easily adjustable for fast setup Accurate alignment that reduces rework The high sensitivity of 0.02 mm/m ensures tiny angular deviations are visible during setup, making reproducible levelling straightforward. Conformity with DIN 877 places this instrument in the recognised class of engineering levels used for machine installation and maintenance. By using a sensitive vial and a clearly readable scale, inspection and correction cycles become faster, which reduces downtime and the cost of iterative adjustments. Solid construction for durable performance Manufactured from special grey cast iron, the instrument combines mass and stiffness to resist bending and ensure measurements remain stable under workshop conditions. The prismatic base provides a positive contact on cylindrical or angled surfaces, improving repeatability when aligning shafts, housings or machine beds. Robust workmanship and corrosion-resistant finishing keep the tool serviceable across regular industrial use. Simple adjustment for efficient workflows Design features that allow the level to be easily adjusted speed up the initial setup and subsequent rechecks. A straightforward adjustment mechanism shortens the time needed to bring an assembly into tolerance, which benefits both maintenance teams and production lines. Clear, high-contrast markings and an ergonomically arranged vial support confident readings even in busy shop-floor lighting. A dependable choice from an established precision partner As part of the Metav IndustryLine, this alignment level is backed by a supplier that positions itself as a reliability filter for the European market. The brand's broad product range and long-standing customer base reflect consistent quality control and a pragmatic logistics setup from Emmerich. Selecting this instrument supports efficient procurement while keeping the focus on accuracy and long-term availability. For alignment tasks that demand repeatable precision, choose the Metav IndustryLine M215.132 and contact Metav Werkzeuge in Emmerich for tailored application guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M215.132 GTIN: 4054469182599 Standard: DIN 877 Facts Measuring length: 200 mm Sensitivity / reading: 0.02 mm/m Category: Angle measuring device Special features Material: grey cast iron (special) Prismatic base for secure seating Easily adjustable for setup and rechecking FAQ What level of precision does this instrument provide? The M215.132 offers a sensitivity of 0.02 mm/m, making the precision spirit level suitable for fine alignment and machine levelling tasks. Is the instrument suitable for machine installation and maintenance? Yes; the M215.132 is designed for workshop and machine-room applications where DIN 877 conformity and a prismatic seating aid reliable alignment. What is the construction material and why does it matter? The body is made from special grey cast iron, which provides the stiffness and mass required for stable readings during industrial use. How is the level adjusted on site? An easily adjustable mechanism allows the user to set and recheck the instrument quickly, reducing setup times during alignment procedures. Does the product come with a traceable article number? Yes; the precision spirit level is listed under article number M215.132 with GTIN 4054469182599 for ordering and traceability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 mm Precision Spirit Level 0.3 mm/m Prism Base, Special Cast Iron, Adjustable, Supplied in Case - Metav IndustryLine
Benefit from a 200 mm alignment tool that combines 0.3 mm/m accuracy with a robust grey cast iron body and a prismatised base, allowing fast, repeatable straightness checks and simple on-site adjustment; order directly via Metav Werkzeuge or contact our consultants for specification advice. Machinist's level M215.138 — 200 mm, 0.3 mm/m (Metav IndustryLine) A Machinist's level M215.138 designed for precise alignment and straightness checks in machine assembly and metalworking applications. 200 mm length for compact alignment 0.3 mm/m accuracy per DIN 877 Special grey cast iron construction Prismatised base, easily adjustable Precision that speeds up alignment tasks The short, rigid beam delivers 0.3 mm/m accuracy in accordance with DIN 877, which translates into reliable, quantifiable alignment results for machinery set-up and component inspection. This level's compact 200 mm span reduces the influence of local surface irregularities while keeping handling straightforward in confined spaces. The measured accuracy minimises rework and inspection time, offering a clear efficiency gain in routine alignment cycles. Robust construction with practical handling features Made from grey cast iron, the instrument offers proven damping of vibration and thermal stability compared with lighter alloys; this provides consistent readings over repeated measurements. The prismatised base enables edge and profile checks on round or angular components, extending the tool's usability beyond flat surfaces. Adjustability is easily achieved via the simple fine‑tuning mechanism, so calibration can be performed quickly on the shop floor and the tool stays serviceable over a long operational life. Delivery includes a case for transport, protecting the instrument during storage and transit. Clear use cases and dependable specification Ideal for machine builders, toolroom technicians and maintenance teams, the level suits tasks such as machine bed alignment, spindle squaring and checking run‑out on assemblies where a compact, high‑confidence instrument is required. The combination of DIN‑standard accuracy and a prism base means this level replaces ad hoc setups and provides repeatable measurement documentation. Supplied as part of the Metav IndustryLine, the instrument benefits from Metav's quality control and logistics that support reliable supply to workshops and production facilities. For specification support or to request the Metav IndustryLine Machinist's level M215.138 with 0.3 mm/m accuracy and prism base, contact Metav Werkzeuge via e‑mail or telephone for tailored advice and ordering assistance Technical data Article number: M215.138 GTIN: 4054469182650 Standard: DIN 877 Facts Length: 200 mm Accuracy: 0.3 mm/m Special features Material: grey cast iron Prismatised base for edge measurements Easily adjustable for recalibration Delivered in a plastic or wooden case for transport FAQ What accuracy does this level provide? The Metav IndustryLine machinist's level M215.138 provides an accuracy of 0..3 mm/m in line with DIN 877. Is the level suitable for edge and profile checks? Yes, the prismatised base is designed for edge and profile measurements, so the M215.138 can be used on round and angled surfaces as well as flat beds. Can the instrument be recalibrated on the shop floor? The level is easily adjustable and can be quickly fine‑tuned during routine checks; full laboratory calibration is available if traceable certification is required. Does the delivery include protection for transport? Delivery includes a protective case for transport, which secures the instrument during storage and transfer between workplaces. Which applications are best suited to this level? Typical uses include machine bed alignment, spindle squaring and straightness checks in toolrooms and maintenance workshops; the compact 200 mm format is particularly handy in confined setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 mm Spirit Level With Prismatic Base 0.02 mm/m, Special Cast Iron, Wooden/Plastic Case - Metav IndustryLine
Take advantage of the combination of precise alignment and robust construction to ensure repeatable levelling results on jigs and machine beds. The high sensitivity and prismatic base deliver measurable improvements in setup time and accuracy—order the tool directly via Metav Werkzeuge or contact the consultants for project-specific advice. M215.102 Precision spirit level — 200 mm, 0.02 mm/m, Metav IndustryLine The M215.102 Precision spirit level is a compact alignment instrument for workshop levelling, machine set‑up and inspection tasks where sub‑millimetre straightness matters 200 mm measuring length 0.02 mm/m sensitivity Prismatic base for secure seating Grey cast iron body for stability Accurate alignment for demanding assemblies The short 200 mm body combined with a 0.02 mm/m sensitivity makes this instrument suitable for precise alignment tasks on fixtures and small assemblies. The comparatively compact length reduces torsion and enables reliable handling on machine beds and assembly jigs, while the prismatic base ensures stable contact on cylindrical and flat surfaces. With a cast construction that resists vibration, the instrument offers repeatable measurement behaviour during set‑up operations, reducing the need for frequent re‑checks and saving process time. Stable construction for consistent results Made from grey cast iron, the level provides inherent mass and damping to resist transient movement during measurement. The material choice improves thermal and mechanical stability in everyday workshop environments, which in turn supports consistent levelling across multiple set‑ups. The prismatic seating face is machined to retain position on rounded and angled profiles, so the instrument stays put where a flat base would slip—this increases confidence in the numeric indication and reduces operator correction cycles. Practical handling and transport protection Despite its precision, the instrument is optimised for workshop workflow: its compact footprint allows single‑handed placement and fast repositioning during iterative alignment. The tool is supplied in a protective transport case to prevent knocks and preserve the calibrated condition during storage and transit. The case also simplifies organisation within tool cabinets or on inspection trolleys, helping to keep inspection equipment ready for immediate use. Useful for machine set‑up and quality checks For tasks such as machine bed levelling, spindle alignment and jig setup, the instrument provides a clear, measurable reference that helps to quantify deviations and document corrections. The prismatic base supports measurements on shafts and housings, while the fine sensitivity makes small taper or twist faults visible that would otherwise be missed with coarser instruments. This precision supports improved first‑pass yield in assembly and machining operations. Traceability and standards‑aware procurement The instrument is identified for inventory and procurement with its article number and GTIN, enabling straightforward traceability in documentation and ISO‑aligned quality systems. The compact size and measurable sensitivity make it a practical choice for inspection benches where space and reproducibility are priorities, while the robust construction supports long service life under routine workshop conditions. For dependable alignment with the M215.102, contact Metav Werkzeuge in Emmerich for local supply and expert advice by phone or e‑mail Technical data Article number: M215.102 GTIN: 4054469109756 ECLASS: 21160113 ETIM: EC000145 TARIC code: 90153090 Core specifications Length: 200 mm Sensitivity: 0.02 mm/m Materials & special features Material: grey cast iron Prismatic base for secure seating Supplied in protective transport case FAQ What level of precision does this instrument provide? The M215.102 precision spirit level offers a sensitivity of 0.02 mm/m, making it suitable for fine alignment work on machine beds, jigs and small assemblies. Is the prismatic base suitable for round components? Yes; the prismatic base of the M215.102 is machined to seat securely on cylindrical and flat surfaces, helping to prevent lateral movement during measurement. How is the instrument delivered and protected? The tool is supplied in a protective transport case to prevent damage during storage and transit and to keep the measuring faces clean and intact. Which material is used for the body, and why does it matter? The body is made from grey cast iron, chosen for its damping and thermal stability properties that improve repeatability in workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 mm Spirit Level, 0.1 mm/m Prismatic Base, Grey Cast Iron, 1.9 kg, Supplied in Case - Metav IndustryLine
Benefit from precise alignment and repeatable set-ups thanks to the combination of 0.1 mm/m sensitivity, a prismatic base for secure seating on profiles, and robust grey cast iron construction — ideal for machine adjustment and toolroom checks. Order the precision level directly via Metav Werkzeuge or contact our consultants for bespoke application advice. M215.142 precision machinist's level — 200 mm, 0.1 mm/m, Metav IndustryLine M215.142 precision machinist's level for workshop alignment tasks, combining a compact 200 mm span with a prismatic seating surface for reliable positioning on profiles and cylindrical parts Prismatic base for secure seating on profiles High sensitivity: 0.1 mm/m for precise alignments Robust grey cast iron for thermal stability Compact 200 mm length for tight set-ups Accuracy and repeatability that reduce rework The calibrated sensitivity of 0.1 mm/m means the instrument shows one-tenth of a millimetre of deviation per metre of run — a measurable metric that supports tight alignment tolerances in machining and assembly. This level offers a stable reference for setting machine beds, verifying tilt and checking run-out; the clear numerical sensitivity converts technical demand into an achievable measurement procedure. By relying on such a defined specification, inspection intervals become comparable and traceable, which lowers the risk of unplanned rework and keeps production flow predictable. Stable construction that preserves the reference Manufactured from grey cast iron, the body provides inherent damping and thermal mass that reduce momentary disturbances during measurement. The prismatic base is shaped to sit securely on profiles and cylindrical surfaces, improving contact stability compared with flat‑bottom versions. Together these design choices minimise measurement scatter and deliver a dependable datum for both short checks and comparative procedures. The construction therefore supports repeatable set-ups rather than one-off adjustments, which is essential for workshop routines and jig alignments. Compact form for practical workshop use With a 200 mm overall span the instrument is tailored to confined set-ups where longer levels are awkward to handle. The compact length offers a balance between reach and control: it is long enough to bridge small assemblies yet short enough for one-person handling in tight fixture spaces. This format suits bench work, small machine tools and alignment of accessories, allowing technicians to integrate the level into common workflows without adding bulk to the toolkit. Built to last and to simplify decision making The combination of a dedicated cast‑iron body and defined sensitivity enables a straightforward comparison between measured deviation and permissible tolerance, simplifying go/no‑go decisions on the shop floor. The instrument's specification supports transparent procurement choices: the material and prismatic seating speak to durability and application fit, while the clear sensitivity value facilitates accurate procedure writing. Metav’s role as a precision partner ensures that the item is supplied within a quality-controlled distribution network, easing integration into established inspection regimes. Contact Metav Werkzeuge today for technical guidance and to obtain the M215.142 precision machinist's level directly from our Emmerich warehouse — expert advice and order processing are available by phone or e‑mail. Technical data SKU: M215.142 GTIN: 4054469109817 Eclass: 21160113 ETIM: EC000145 Tariff number: 90153090 Numbers / Core technical data Length: 200 mm Sensitivity: 0.1 mm/m Special features / Design Material: grey cast iron Prismatic base for secure seating Category: angle measuring devices Label: precision level with prismatic seating surface FAQ What measurement accuracy does the instrument provide? The level offers a sensitivity of 0.1 mm/m, which indicates the deviation measured per metre and is suitable for precise alignment tasks in machine shops. Can this level be used on cylindrical or profile surfaces? Yes; the prismatic base is designed to improve seating on round or profiled elements, giving a more secure contact than a flat base during checks. What material is the body made from and why does it matter? The body is manufactured from grey cast iron, chosen for its vibration damping and thermal stability, which helps maintain a consistent reference during measurements. Is the compact length suitable for workshop use? The 200 mm span is intended for tight set-ups and tooling checks where a longer level would be impractical; it strikes a balance between reach and controllability. How does this instrument help reduce setup time? Clear sensitivity and a stable seating surface make it easier to interpret deviations and make decisive adjustments, reducing iterative rework and shortening alignment cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200 mm Spirit Level, 0.3 mm/m Prismatic Base, Grey Cast Iron, 1.9 kg, Supplied in Case - Metav IndustryLine
Take advantage of the 200 mm compact length, sensitivity 0.3 mm/m and the stable grey cast iron construction for reliable alignment and angle checks in workshop and inspection tasks. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. M215.162 Precision spirit level – 200 mm, 0.3 mm/m (Metav IndustryLine) The M215.162 precision spirit level is a compact alignment instrument with a prismatic base, engineered for accurate angle and level checks in workshop, inspection and assembly environments. Prismatic base for secure seating Sensitivity 0.3 mm/m for clear alignment 200 mm compact length for workshop use Grey cast iron construction for stability Consistent alignment where space is limited The compact 200 mm length of this precision spirit level delivers a useful combination of reach and manoeuvrability for routine alignment tasks on machines, jigs and assemblies. Its reduced span makes the instrument easier to position in confined places while preserving rigidity and repeatability. The level’s prismatic base increases contact stability on cylindrical and irregular surfaces, reducing measurement scatter and helping to achieve faster set-up times in production and maintenance workflows. Measurable precision that supports quality control With a sensitivity of 0.3 mm/m, the instrument provides a clear, quantifiable indication of tilt suitable for general workshop alignment and straightness checks. This sensitivity corresponds to a small angular deviation and is useful for aligning machine beds, fixtures and reference surfaces where adjustments are performed to a visible, engineering-relevant tolerance. The clear, graduated vial and stable housing mean deviations are easy to read and translate into corrective action, improving process control and reducing rework. Durable construction for long-term stability Manufactured from grey cast iron, the level is designed to maintain its reference geometry under normal workshop conditions; the material dampens vibrations and resists deformation during handling. The prismatic seating and sturdy body support reproducible positioning across repeated measurements, which is especially beneficial when daily alignment tasks demand both speed and reliability. The solid construction also supports a long service life, making the instrument a practical choice for busy maintenance departments and toolrooms. For robust, compact alignment tools from Metav IndustryLine, contact Metav Werkzeuge to request technical guidance or to place an order via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M215.162 GTIN: 4054469109879 Manufacturer: Metav IndustryLine Facts Length: 200 mm Sensitivity: 0.3 mm/m Tariff code: 90153090 eClass: 21160113 ETIM: EC000145 Special features Material: Grey cast iron Prismatic base surface Category: Angle measuring instrument FAQ What is the measuring sensitivity of this level? The sensitivity is 0.3 mm/m, which provides a clear visual indication of small angular deviations suitable for workshop alignment tasks with the M215.162 precision spirit level. Which surfaces can be supported by the prismatic base? The prismatic base is designed to seat securely on flat and cylindrical surfaces, improving contact stability during alignment and angle checks performed with this instrument. Is the instrument suitable for machine alignment in production environments? Yes, the construction and sensitivity make the level appropriate for general machine and fixture alignment in production and maintenance settings, where reproducible positioning and stability are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ensure precise alignment across your workflow
Angle measuring instruments, also offered as angle gauges, inclinometers or digital angle finders, provide the foundational accuracy required in modern manufacturing, machine building and professional workshops. These instruments permit reliable angle determination, transferring angular measurements directly to workpieces and verifying geometric conformity during production and inspection.
How these instruments work and where they are essential
Mechanical angle gauges typically consist of a semicircular protractor and a movable arm with a precise vernier, plus a locking screw to fix the measured value for transfer or repeated checks. Digital angle measuring instruments combine robust mechanical legs with electronic sensors and an LCD display, delivering immediate readings that reduce interpretation errors and accelerate routine checks. Digital inclinometers determine angles relative to gravity and can show relative and absolute inclinations simultaneously, making them ideal for aligning machine beds, pipework or axes where gravity-referenced angles matter.
Measurable benefits that improve production efficiency
- Faster setup and fewer rejects thanks to the zero function, which allows the display to be zeroed at any position for quick relative measurements.
- Safer readings in confined or overhead positions using the hold function and rev function for 180° display rotation.
- Reduced downtime and wear by using instruments with chromed special steel housings or anodised aluminium bodies that resist corrosion and maintain profile stiffness.
- Hands-free alignment on ferrous surfaces through a robust magnetic base, enabling single-operator adjustment on steel constructions.
- Dependable analogue options with a high-precision vernier for environments where electronic devices are unsuitable.
Metav: precision made accessible for every workshop
Metav positions itself as a dependable partner for industrial buyers who require both variety and quality. Based in Emmerich, Metav acts as a quality filter for the European market, offering an extensive range of analogue and digital angle measuring instruments alongside comprehensive workshop equipment. With over 48,000 customers and a catalogue exceeding 250,000 products, Metav supplies reliable stock and clear order handling so teams can focus on production rather than logistics. If you require rapid selection advice or product matching, Metav’s curated assortment simplifies procurement decisions for maintenance, toolrooms and quality departments.
Compact summary
Angle measuring instruments, whether analogue or digital, secure repeatable alignment, speed up inspection processes and reduce rework by combining proven mechanical design with modern sensor functions such as zero, hold and rev.
FAQ
What is the advantage of a digital inclinometer over a mechanical angle gauge?
A digital inclinometer delivers immediate numeric readings on an LCD display and often includes functions such as zero, hold and rev, making the device faster and less error-prone for serial inspections than a purely mechanical angle gauge.
When should I choose an instrument with a magnetic base?
Choose an instrument with a magnetic base for alignment tasks on ferrous constructions, such as machine beds or steel frames, where hands-free positioning and stable attachment significantly improve accuracy and safety.
Are anodised aluminium instruments suitable for mobile service work?
Yes. Instruments with anodised aluminium bodies offer low weight with high profile stiffness, making them especially suitable for large-format tools and mobile service engineers who need portability without compromising precision.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com