Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
300mm Precision Caliper Digital Swiss Display 11mm, Low Measuring Force 0.8N, IP67 - Microtech Metrology
Take advantage of the combination of IP67 protection, a Swiss Digital display and a low measuring force of 0.8 N for consistent workshop results; order the Precision Caliper directly via Metav Werkzeuge or ask our consultants if needed. Precision Caliper — Digital caliper with IP67 protection and Swiss display (Microtech Metrology) The Precision Caliper is a digital measuring instrument intended for machine shops and industrial quality control, offering a standard measuring range up to 300 mm and a robust design for everyday workshop use. Swiss digital display, 11 mm height IP67 dust and water protection Low measuring force 0.8 N for repeatable readings Measuring range 0–300 mm, workshop standard Consistent measurement performance for routine quality checks The caliper’s low measuring force (0.8 N) reduces variation caused by operator pressure, improving repeatability when measuring medium-sized components. With a readable Swiss Digital display and a clear 0.1 mm readout step, the instrument supports fast go/no-go decisions and production control tasks. Designed for the standard workshop range, the device balances reach and stiffness across 0–300 mm, making it a practical tool for general machining and inspection applications. Built to withstand the workshop environment Sealed to IP67, the instrument tolerates dust and temporary immersion, which lowers downtime in demanding shop-floor conditions. The Swiss Digital display with an 11 mm digit height increases readability under workshop lighting, so measurements can be confirmed quickly without auxiliary tools. Rugged construction and a sealed slider help preserve measuring surfaces and electronics, reducing maintenance intervals and ensuring reliable operation across long shifts. Ergonomic handling and integration into shop processes Jaw geometry and slim slider construction enable confident one-handed operation, while the modest jaw length supports access to tight features. The combination of robust protection and straightforward digital readout facilitates integration into established inspection routines and documentation workflows. For questions about suitability for specific tasks or process integration, Metav’s technical advisors provide practical guidance to match measurement strategy to production needs. Choose Microtech Metrology instruments via Metav Werkzeuge for workshop-ready precision and practical advice from our team in Emmerich; contact Metav Werkzeuge for tailored recommendations and order support Technical Data Article number: 141077353 GTIN: 4061905036811 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Readout / resolution: 0.1 mm Measuring force: 0.8 N Display digit height: 11 mm Jaw length: 60/21 Special features Swiss Digital display Protection class IP67 Digital operation with workshop focus SKU: 141077353 FAQ What measuring range does the caliper cover? The Precision Caliper covers a measuring range of 0–300 mm, suitable for standard workshop and machine‑shop tasks. How fine is the readout and how does that affect accuracy? The instrument provides a 0.1 mm readout step; combined with a low measuring force of 0.8 N this improves repeatability for routine inspections using the Precision Caliper. Is the caliper suitable for harsh or damp workshop conditions? Yes, the device is rated IP67, which protects against dust ingress and temporary immersion, making the caliper appropriate for demanding shop environments. What makes the display easier to read during production work? The Swiss Digital display has an 11 mm digit height for increased legibility under typical workshop lighting, helping speed up checks and reduce reading errors. Which manufacturer produces this caliper and what is the SKU? This caliper is supplied by Microtech Metrology and is listed under SKU 141077353 for ordering and inventory purposes. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Double Jaws Digital 0.01mm Resolution IP54 ISO 17025 Calibration Microtech Metrology
Optimise inspection throughput with the Microtech Metrology Precision Caliper: ISO 17025 calibration plus micro‑USB data output speed up documentation, while the 0–300 mm measuring range and ±0.03 mm accuracy deliver repeatable results. Order the Precision Caliper directly via Metav Werkzeuge or ask our consultants if needed. Microtech Metrology Precision Caliper (Digital, 0–300 mm, ISO 17025) Precision Caliper — a digital measuring instrument for workshops and quality control, designed for standard metrological tasks in machine and metalworking environments. Digital display, 14 mm height Measurement range 0–300 mm Resolution 0.01 mm, accuracy ±0.03 mm ISO 17025 calibrated, micro‑USB output Dependable accuracy for routine inspection tasks This digital measuring instrument is built for reliable, repeatable measurements in everyday industrial settings. The Standard range (0–300 mm) balances reach and stiffness, making it suitable for typical workshop components, fixtures and housings; the instrument’s 0.01 mm display resolution combined with a stated ±0.03 mm accuracy reduces uncertainty during quality checks. The clear numeric readout and tight tolerances support faster decision‑making on the production floor and minimise rework. Traceable calibration and modern data transfer Delivered fully calibrated to ISO 17025 standards with a calibration certificate, the unit supports formal quality systems and audit trails. With micro‑USB data output, measurement logs can be transferred directly to documentation systems for statistical process control or batch records, removing transcription errors and speeding reporting. The IP54 rating protects internal electronics against workshop dust and splashes, extending service life in busy manufacturing environments. Practical form and readable display for efficient workflow The caliper’s double measuring jaws (60/40 mm) provide robust contact geometry for both internal and external measurements, while the 14 mm digital display ensures readings remain legible under workshop lighting. Compact ergonomics combined with a straightforward digital interface mean inspections can be carried out swiftly with one operator, improving throughput without sacrificing precision. Integration capability and rugged protection translate into fewer interruptions and consistent inspection results. Contact Metav Werkzeuge to request the ISO 17025‑calibrated Microtech Metrology Precision Caliper (SKU 141083321) and arrange delivery or technical guidance from our Emmerich quality centre via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 141083321 GTIN: 4061905036309 Manufacturer: Microtech Metrology Facts Measurement range: 0–300 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display height: 14 mm Data output: Micro‑USB Special features IP protection: IP54 ISO 17025 calibration included Double measuring jaws: 60/40 mm Digital caliper FAQ What measurement range does the instrument cover? The instrument covers a 0–300 mm measurement range, classifying it in the standard caliper category for general machine and metalworking use. Is the caliper supplied calibrated and traceable? Yes. The Microtech Metrology Precision Caliper is delivered fully calibrated to ISO 17025 and supplied with a calibration certificate for traceability and audit purposes. How are readings exported for documentation? Readings can be exported via the integrated micro‑USB output, enabling direct transfer to data‑loggers or quality software for process control and record keeping. What level of protection does the caliper offer in workshops? The instrument is rated IP54, providing protection against dust ingress and splash water typical of workshop environments. Which measuring tasks are supported by the jaw geometry? The double measuring jaws (60/40 mm) permit reliable external and internal measurements as well as stepped measurements, supporting common inspection routines with a single tool. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Double Jaws Microcomputer Display IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of laboratory-grade calibration, robust protection and modern data connectivity to streamline measurement workflows; the instrument arrives with an ISO 17025 calibration certificate and supports both Wireless and USB data transfer. Order the product directly via Metav Werkzeuge or ask our consultants if needed. Precision Caliper (0–300 mm) — Microtech Metrology, dual jaws & 1.5" colour touchscreen The Precision Caliper (0–300 mm) is a workshop and quality‑control instrument designed for standard machine‑shop measurements, offering rapid digital readout, wireless data transfer and an ISO 17025 calibration certificate for traceable results. ISO 17025 traceable calibration included Wireless and USB data output options Colour 1.5" touchscreen for clear readings IP54 dust and splash protection Dual measuring jaws 60/40 for versatile use Precise, traceable measurements for routine quality control The caliper delivers a documented measurement chain thanks to the supplied ISO 17025 calibration certificate, which confirms traceability and reduces audit effort in quality control processes. With a stated accuracy of 0.015 mm, the instrument suits standard inspection tasks where reproducible dimensional checks are required. Classified within the standard (0–300 mm) range, this model balances reach and stiffness for general machining, fixtures and assembly work. Faster data capture and seamless integration into workflows Equipped with Wireless and USB outputs and a colour touchscreen, the device simplifies data collection for statistical process control and digital record‑keeping. The integrated microcomputer and clear display reduce reading errors and accelerate batch inspections; measured values can be exported directly via USB or transmitted wirelessly to data loggers and inspection software, supporting efficient documentation and traceability. Robust design tuned to everyday shop conditions The caliper’s dual measuring jaws (60/40) provide flexibility for external and internal measurements while preserving rigidity in typical workshop tasks. An IP54 rating protects the electronics against dust ingress and water splashes, extending service life in busy environments. The combination of a solid digital mechanism and pragmatic protection makes the instrument a reliable standard tool for machinists and maintenance technicians. Ready for immediate use and backed by Metav supply reliability Delivered fully calibrated to ISO 17025, the instrument arrives with a calibration certificate suitable for formal quality systems. As a digitally enabled precision tool with both wireless and wired interfaces, this caliper fits production floors, inspection benches and training labs that demand dependable measurement data. Metav’s European distribution hub in Emmerich ensures prompt fulfilment and access to product expertise for integration advice. Contact Metav Werkzeuge today to discuss the ISO 17025‑calibrated Microtech Precision Caliper (0–300 mm) and how its wireless and USB outputs can be integrated into existing measurement routines; Metav consultants in Emmerich will advise on delivery and application. Technical data Article number: 141077321A GTIN: 4061905037283 Manufacturer: Microtech Metrology Category: Messschieber ECLASS: 21170344 Facts Measuring range: 0–300 mm Accuracy: 0.015 mm Display: Colour 1.5" touchscreen Data output: Wireless + USB Special features ISO 17025 calibration certificate included Digital instrument with integrated microcomputer Dual measuring jaws 60/40 IP54 protection rating Digital product (electronic readout) FAQ Is the caliper supplied with a calibration certificate? The Microtech Precision Caliper is delivered with an ISO 17025 calibration certificate, confirming traceability and suitability for formal quality systems. What data interfaces are available for measurement transfer? This digital caliper offers both Wireless and USB data outputs to export measurements to inspection software or data loggers. What is the usable measuring range and typical application class? The instrument covers 0–300 mm, which places it in the standard range for machine‑shop measurement, fixtures and general workshop inspection. How accurate is the instrument for routine dimensional checks? The device has a stated accuracy of 0.015 mm, suitable for standard quality control and workshop verification tasks. Is the caliper protected against dust and splashes? Yes; the caliper carries an IP54 rating, offering protection from dust ingress and splashing water in typical workshop environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Double-Jaw E-Ink Display 0.005mm Resolution IP54 ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of shop‑floor robustness, traceable calibration and easy data transfer to keep inspection processes efficient and auditable; the 0–300 mm measuring range with 0.02 mm accuracy and the included ISO 17025 calibration certificate ensure reliable results. Order the instrument directly via Metav Werkzeuge or consult our experts for application advice. Precision Caliper 141093321F — Digital E‑Ink 2.13" display, IP54 rating (Microtech Metrology) The Precision Caliper with double jaws and depth gauge, designed for standard workshop and laboratory measurement tasks across the 0–300 mm range E‑Ink 2.13″ display for low‑power legibility IP54 protection for shop floor use ISO 17025 calibration certificate included 0.02 mm accuracy, 0–300 mm measuring range Precision that supports documented quality control This digital measuring instrument delivers laboratory‑grade traceability thanks to the supplied ISO 17025 calibration certificate and an intrinsic accuracy of 0.02 mm. The measuring device is classified in the standard caliper category (0–300 mm), which balances reach and stiffness and is ideal for routine machine‑shop inspections and component checks. The certified calibration and stable measurement behaviour reduce uncertainty in acceptance decisions and provide a documented audit trail for quality systems. Reliable readings and straightforward data capture on the shop floor An E‑Ink 2.13" display ensures clear, glare‑free readings with very low power consumption, while the IP54 enclosure protects sensitive electronics against dust and splashes, making the caliper suitable for industrial environments. Measurement values can be exported via Wireless + USB, enabling fast transfer into inspection logs or SPC software and eliminating manual transcription errors. This connectivity supports efficient documentation and shortens the time from measurement to corrective action. Versatile measuring geometry that reduces rework The instrument features double jaws with a 60/40 mm jaw length split and a dedicated depth gauge, enabling consistent external, internal and step measurements within one tool. The double measuring force concept (external 8 N / internal 4 N) promotes reproducible contact conditions for different measurement orientations, which lowers operator‑induced variation. These design choices simplify measurement workflows and reduce the need for repeated checks. Traceability, brand quality and integration into inspection routines Manufactured by Microtech Metrology, this caliper is delivered ready for use with a calibration certificate and clear identification (GTIN included), supporting traceable inventory and quality records. The combination of robust protection, low‑power display technology and wired or wireless data output makes the instrument a practical choice for both bench‑top quality control and connected manufacturing environments. Integration into regular inspection routines helps maintain consistent product quality and faster decision‑making. For a traceable measuring solution from Microtech Metrology, contact Metav Werkzeuge in Emmerich to discuss procurement and application suitability — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 141093321F GTIN: 4061905457371 Brand: Microtech Metrology Digital display: E‑Ink 2.13" Facts Measuring range: 0–300 mm Accuracy: ±0.02 mm Reading: 0.005 mm Jaw lengths: 60 / 40 mm Measuring force: external 8 N / internal 4 N Protection class: IP54 Special features ISO 17025 calibration certificate included Data output: Wireless + USB Depth measurement function included Double jaws for internal and external measurement Low‑power E‑Ink display for clear legibility FAQ Is the caliper delivered calibrated? Yes. The Precision Caliper 141093321F from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceability. What measuring range and accuracy does the instrument offer? The instrument covers 0–300 mm with an accuracy of 0.02 mm, making it suitable for standard workshop and laboratory inspections. Can measurement values be exported to inspection software? Yes. Measurement data can be transferred via Wireless + USB interfaces for direct logging into SPC systems or inspection spreadsheets. Is the device suitable for use in a production environment? The caliper’s IP54 rating and robust design make it appropriate for shop‑floor use while the E‑Ink display ensures readable values under varying light conditions. What measurement functions are available with this tool? The tool supports external and internal measurements, depth gauging and step measurements, aided by double jaws and a depth probe geometry. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper E-Force 1–20N Wireless USB MODBUS, ISO17025 Calibrated - Microtech Metrology
Take advantage of precise force‑controlled measuring, submicron resolution and broad industrial connectivity for consistent quality control across production lines; order directly via Metav Werkzeuge or consult our specialists for system integration. DataMet eFORCE 1-20N Precision Caliper 0–300 mm — Swiss precision with Industry 4.0 connectivity The DataMet eFORCE 1‑20N Precision Caliper is a force‑controlled digital caliper designed for standard workshop and production tasks, offering submicron resolution and multiple industrial data outputs for seamless measurement logging and automated inspection. 0.0005 mm resolution (Swiss reading system) E‑Force force control 1–20 N with AUTO‑Force Wireless + USB + MODBUS RTU data transfer Delivered with ISO 17025 calibration certificate Consistent submicron measurements for reliable quality control Built around a Swiss reading system that supports a selectable 0.0005 mm resolution, this caliper delivers measurement detail well beyond conventional workshop tools. The high resolution, combined with a documented stated accuracy of 0.008, reduces uncertainty when inspecting fine features or performing step and depth checks. The selectable resolution modes (0.0005 / 0.001 / 0.01 / 0.1 mm) allow a balance between speed and precision, so measurement procedures can be adapted to the tolerance requirements of each component while keeping traceability and repeatability at the forefront. Integrated data flow and Industry 4.0 readiness Data capture and system integration are simplified by multiple transfer modes: Wireless streaming to the MDS app, USB HID, and an industrial MODBUS RTU interface for direct PLC or SCADA connection. Onboard memory management stores up to 2000 values with folder and statistics functions, minimising manual transcription and enabling fast batch evaluation. The touchscreen‑based MICS system supports formula, max/min and Go/NoGo checks, so measured values can be validated at the point of inspection and exported into the process control environment without extra conversion steps. Force control for reproducible operator‑independent results The embedded E‑Force control module lets the operator select measuring force between 1–20 N or use the AUTO‑Force mode, and a colour force indication prevents measurement bias due to varying hand pressure. This controlled contact reduces scatter on delicate parts and improves correlation between different inspectors. Ergonomic aspects such as compact jaw geometry (60/20 mm) and a 2.0” colour touchscreen support efficient single‑hand operation and clear result review on the shop floor. Standard caliper range with certified traceability Classified in the Standard size category with a measuring range up to 300 mm, this tool fits the daily needs of machine shops and metalworking production where reach, stiffness and one‑hand handling matter. Delivery includes the instrument, free versions of the MDS app, a USB data/charging cable, a calibration protocol and ModBus RTU components. A full calibration certificate in accordance with ISO 17025 (ILAC‑MRA) is supplied, providing documented traceability for quality systems and audit requirements. For automation projects or advice on integrating the Microtech Metrology precision caliper into existing inspection chains, contact Metav Werkzeuge — our application engineers in Emmerich will support selection, configuration and delivery; eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: 141088030M Name: DataMet eFORCE 1-20N Precision Caliper 0–300 Wireless + USB + MODBUS Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Resolution: 0.0005 mm (selectable) Stated accuracy: 0.008 Measuring force: 1–20 N Jaw length: 60/20 mm Memory capacity: 2000 values Special features Industry 4.0 E‑Force caliper with MICS 2.0 touchscreen (patents listed) Swiss made reading system with 0.5 µm resolution option Functions: Go/NoGo, Max/Min, Formula, Timer, Linear & temperature correction E‑Force module with force selection, AUTO‑Force and colour indication Data transfer: Wireless to MDS app, Wireless HID, USB HID, MODBUS RTU (RS‑485) MODBUS ASCII / MODBUS TCP/IP available on request Delivered with ISO 17025 calibration certificate Delivery set includes caliper, MDS app free versions, USB cable, calibration protocol, ModBus RTU FAQ What measuring range does this caliper cover? The instrument covers a measuring range of 0–300 mm, categorising it as a Standard precision caliper suitable for general machine shop and metalworking inspection tasks. How fine is the resolution and what accuracy can be expected? Resolution can be selected down to 0.0005 mm (0.5 µm) using the Swiss reading system; the product states a measurement accuracy of 0.008 for routine use and process control. Is the measuring force adjustable and why does that matter? Yes — the E‑Force module allows force selection from 1–20 N and an AUTO‑Force mode; controlled force ensures reproducible contact and reduces operator‑induced variation on sensitive parts. How can measurement data be transferred to production systems? DataMet eFORCE supports wireless transfer to the MDS app, USB HID, and MODBUS RTU (RS‑485); MODBUS ASCII and MODBUS TCP/IP are available on request for PLC or SCADA integration. Does the tool come calibrated and is the certificate traceable? The caliper is delivered with a calibration protocol and an ISO 17025 calibration certificate (ILAC‑MRA), providing documented traceability for quality management and audits. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper E-Ink Display, Wireless+USB, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of ISO 17025 traceability, a low‑power E‑Ink 2.13" display and dual Wireless + USB data output for rapid, reliable inspection results; order the instrument directly via Metav Werkzeuge or consult the team for application advice. Microtech Metrology Precision Caliper 141093321B — E‑Ink display, Wireless + USB The Precision Caliper from Microtech Metrology is a digital measuring instrument for workshop and quality control, designed for standard‑range dimensional checks up to 300 mm. E‑Ink 2.13" display for clear readings Delivered with ISO 17025 calibration certificate Wireless + USB data output for fast logging IP54 protection for shop‑floor resilience Reliable, traceable accuracy for production and quality control The digital instrument delivers an accuracy of 0.015 mm, supported by a full ISO 17025 calibration and accompanying certificate. This level of performance places the tool above common workshop standards, making it suitable for precise machining verification and incoming inspection. The 0–300 mm measuring range corresponds to the Standard class of calipers, which is recognised for the best balance of reach, stiffness and one‑hand operability in machine and metalworking environments. The documented calibration ensures measurement traceability and reduces uncertainty in QA processes. Fast data capture and seamless integration with inspection systems Equipped with both Wireless and USB outputs, the caliper allows immediate transfer of measurement data into SPC or QMS systems, cutting transcription errors and speeding up reporting. The E‑Ink 2.13" display provides excellent contrast and long battery life, while the IP54 rating protects sensitive electronics against dust and water splashes on the shop floor. A defined measuring force (1–20 N) specification helps achieve repeatable contact conditions, and the asymmetric 60/40 mm jaw lengths improve access to internal and external features. The integrated depth gauge expands the range of measurable geometries without extra tools. Designed for everyday workshop use with practical handling benefits Built as a standard‑range digital caliper, the device is optimised for common workshop tasks such as component checks, fixture set‑up and maintenance inspections. The robust construction and readable E‑Ink interface reduce operator strain and measurement time, while the compact jaw geometry suits confined spaces. As a calibrated instrument delivered with documentation, it fits directly into accredited inspection routines and internal audits, supporting consistent quality outcomes and straightforward audit trails. Contact Metav Werkzeuge for delivery from Emmerich, advice on integration into existing QA workflows and options for batch calibration and documentation. Technical Data Article number: 141093321B GTIN: 4061905457364 Manufacturer: Microtech Metrology Display: E‑Ink 2.13" Data output: Wireless + USB Facts Measuring range: 0–300 mm Accuracy: 0.015 mm Measuring force: 1–20 N Jaw length: 60/40 mm Protection class: IP54 Special features Digital caliper with depth gauge Delivered calibrated to ISO 17025 with certificate Low‑power E‑Ink display for long service life Wireless and USB interfaces for data logging FAQ Is the instrument supplied calibrated? Yes. The Microtech Metrology precision caliper (SKU 141093321B) is delivered fully calibrated to ISO 17025 and includes the calibration certificate. Which measurement range does this caliper cover? The device covers 0–300 mm, placing it in the Standard category suitable for general machine‑shop and metalworking tasks. How are measurement results exported? Measurement data can be exported via the built‑in Wireless connection or through the USB interface for direct capture into inspection software. Is the caliper suitable for use on the shop floor? Yes. With IP54 protection and an E‑Ink display designed for readability, the caliper is built to withstand typical workshop conditions. Does the instrument include a depth gauge? Yes. The caliper includes an integrated depth gauge for measuring recesses and step depths. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper E‑Ink 2.13" Wireless USB, ISO 17025 Calibrated - Microtech Metrology
High-precision measurement, ISO 17025 traceability and convenient Wireless+USB data transfer combine to deliver fast, reliable inspection results for everyday workshop use; order the instrument directly via Metav Werkzeuge or ask our consultants for tailored advice. Microtech Metrology Precision Caliper 0–300 mm with E‑Ink 2.13" display and Wireless+USB A Microtech Metrology Precision Caliper designed for standard workshop and quality‑control applications, offering ISO 17025 calibration and straightforward digital data capture ISO 17025 calibrated with certificate E‑Ink 2.13" display for clear readings Wireless and USB data output 0.01 mm resolution, 0.02 mm accuracy Traceable accuracy for reliable quality control This digital precision caliper is supplied with full ISO 17025 calibration and a traceable certificate, making it a dependable choice for routine inspection where documented accuracy matters. Classified in the Standard range (measuring span 0–300 mm), the instrument balances reach and rigidity to suit general machining and metalworking tasks. With a repeatable 0.02 mm accuracy and a display resolution of 0.01 mm, the device delivers measurable improvements in process consistency compared with non‑calibrated tools, supporting clear acceptance criteria in production control. Seamless data capture to speed workflows Equipped with Wireless and USB data outputs and a low‑power E‑Ink 2.13" display, the caliper simplifies digital documentation and reduces transcription errors. Wireless transmission and direct USB export enable rapid integration with inspection software or a shop‑floor data logger, which supports statistical process control and traceability without additional manual steps. The low‑contrast, high‑legibility display remains readable under variable lighting and conserves battery life, so transfer tasks proceed efficiently and measurement logs stay consistent. Robust handling and practical measurement features Built for everyday use in workshops, the instrument includes hardened measuring faces and a dedicated depth measurement probe for added versatility. These hardened faces resist wear over repetitive use, preserving measuring integrity, while the depth gauge opens applications to grooves, bores and step checks. The digital readout and stable slider mechanics reduce operator influence on readings, improving throughput in QA routines and workshop set‑ups. The instrument’s straightforward controls support rapid familiarisation for technicians and inspectors. Contact Metav Werkzeuge today for expert guidance or to acquire the Microtech Metrology precision caliper with ISO 17025 calibration and reliable Wireless+USB data transfer Technical Data Article number: 141093030C GTIN: 4061905100208 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Resolution: 0.01 mm Accuracy: ±0.02 mm Display: E‑Ink 2.13" Special features Wireless and USB data output Depth measurement probe Hardened measuring faces Delivered calibrated to ISO 17025 with certificate FAQ Is the caliper delivered with a calibration certificate? Yes. The Microtech Metrology precision caliper is supplied fully calibrated to ISO 17025 and includes the associated certificate for traceable documentation. What measuring range and accuracy can be expected? The instrument covers 0–300 mm and provides resolution of 0.01 mm with an accuracy of ±0.02 mm, making it suitable for standard workshop and QA tasks. How can measurement data be exported? Measurement values can be transferred via the caliper’s wireless interface or through USB, enabling direct capture into inspection systems or data loggers without manual entry. Does the caliper include depth and step measurement capability? Yes. A dedicated depth gauge is integrated and the geometry supports internal, external and step measurements for versatile shop usage. Are the measuring faces wear‑resistant for frequent use? The caliper features hardened measuring faces designed to resist wear under regular workshop conditions, helping to maintain measurement reliability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper E‑Ink 2.13" Wireless USB, ISO 17025 Calibrated - Microtech Metrology
Taking advantage of the ISO 17025 calibration, 0.01 mm resolution and wireless data transfer ensures consistently reproducible results and smooth integration into digital workflows; order the precision caliper directly via Metav Werkzeuge or ask our consultants if needed Precision caliper by Microtech Metrology — digital E‑Ink readout, Wireless + USB data transfer The Precision caliper is a digital workshop instrument designed for standard workshop and machine‑shop tasks, offering a clear E‑Ink display and both wireless and USB data output for seamless measurement capture Digital E‑Ink display 2.13" Wireless + USB data transfer 0.01 mm resolution, ±0.02 mm accuracy Delivered calibrated to ISO 17025 with certificate Consistent, workshop‑grade accuracy for everyday tasks The instrument delivers ±0.02 mm measurement accuracy with a 0.01 mm display resolution, a combination that meets the expectations of modern production control and metrology routines. Classified as Standard range (0–300 mm), this size balances reach and rigidity for common workshop components, such as mounting faces, shafts and housings. The measured precision reduces rework and supports reliable pass/fail decisions during incoming inspection and shop‑floor quality checks. Designed for integration into measurement protocols, the caliper’s technical specification provides a verifiable basis for traceable measurements. Clear readings and practical data handling for efficient workflows An E‑Ink display 2.13" ensures high contrast and stable legibility in varied lighting conditions, while the Wireless + USB data interface removes manual transcription errors by enabling digital capture of readings. The instrument stores metrology values in a consistent numerical format, suitable for direct import into spreadsheets or quality management systems. This reduces administrative overhead and accelerates data flow from the bench to the production control system, supporting faster decision cycles and fewer interruptions to machining or assembly operations. Calibrated to laboratory standard and ready for official use Delivered with a full ISO 17025 calibration certificate, the caliper arrives ready for formal inspection tasks and compliance checks. The certificate documents traceability and measurement uncertainty, giving purchasing and quality managers a documented assurance of performance. A built‑in depth gauge extends the tool’s utility beyond simple inside and outside measurements to include step and depth measurements, reducing the need for additional gauges. Together, calibration and multi‑function capability support consistent results in both routine checks and audit situations. Designed for robust daily use and integration Construction and electronics are optimised for the shop environment: the digital readout and data interfaces are arranged for simple one‑hand operation and repeated handling. The device’s Standard range format offers the best compromise between reach and stiffness for single‑operator workflows, while the digital output format minimises data handling errors. By combining proven measurement characteristics with practical data transfer, the instrument supports lean inspection processes and continuous data collection across production shifts. Contact Metav Werkzeuge for ordering and technical advice on integrating the Microtech Metrology precision caliper into existing quality routines, or request a consultation to discuss calibration documentation and data‑capture options Technical Data Article number: 141093030B GTIN: 4061905100192 Brand: Microtech Metrology Facts Measurement range: 0–300 mm Resolution: 0.01 mm Specified accuracy: ±0.02 mm Display: E‑Ink 2.13" Data output: Wireless + USB Special features Delivered with ISO 17025 calibration certificate Depth gauge included for step and depth measurements Digital caliper format suitable for workshop and QC use Digital display type and wireless interface for data capture FAQ What measurement range does the caliper cover? The instrument covers a 0–300 mm range, classifying it as a Standard caliper suitable for typical machine‑shop and workshop tasks. Is the caliper supplied calibrated and traceable? Yes, the caliper is supplied fully calibrated to ISO 17025 and includes the calibration certificate with the delivery. How are readings transferred to a PC or quality system? Readings can be transmitted via Wireless + USB, enabling direct data capture from the digital display to inspection software or spreadsheets. Does the device support depth and step measurements? Yes, the caliper includes a depth gauge function for depth and step measurements in addition to inside and outside dimensions. Which brand and model is this instrument? This is a Precision caliper by Microtech Metrology, article number 141093030B Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Force Control 8N Bidirectional, Swiss Digital 11mm Display, IP67, ISO 17025 Calibration - Microtech Metrology
Benefiting from ISO 17025 calibration, robust IP67 protection and wireless data transfer, this caliper delivers traceable, workshop-ready measurement for production and quality control. Combine 0–300 mm range, hardened measuring faces and a clear Swiss display for efficient inspection workflows; order directly via Metav Werkzeuge or request specialist advice from their consultants. Precision Caliper — digital caliper, ISO 17025-calibrated and IP67 (Microtech Metrology) A Precision Caliper built for standard workshop and laboratory tasks, offering a 0–300 mm measuring range, 8 N bidirectional measuring force and wireless data output for streamlined measurement logging ISO 17025 calibrated traceable accuracy IP67 protection for wet or dusty environments Wireless data output for remote logging Swiss 11 mm digital display, 0.01 mm resolution Traceable results that integrate with quality systems Delivered with an ISO 17025 calibration certificate, the instrument guarantees traceability for audit-sensitive environments and quality assurance processes. The factory calibration is documented and supplied with the caliper, which means readings can be relied on during acceptance tests and internal audits. Certification under this standard is important where documented measurement uncertainty is required, and the included certificate facilitates immediate use in quality control chains without additional calibration delays. Robust engineering for everyday workshop reliability Engineered for practical use, the device features IP67 protection and hardened measuring faces, which reduce wear and safeguard accuracy in harsher production settings. The construction balances stiffness and handling comfort for the standard 0–300 mm class, a size that offers the best compromise between reach and rigidity for general mechanical and metalworking tasks. This combination reduces the need for frequent rework and keeps inspection processes smooth across shifts. Precise electronics and seamless data capture With a 0.01 mm display resolution shown on a Swiss 11 mm digital display and a consistent 8 N measuring force applied in both directions, the instrument supports repeatable measurements and low operator influence. The wireless data output simplifies integration with data loggers and inspection software, removing transcription errors and speeding up documentation. For production lines and labs that collect measurement data digitally, this connectivity shortens cycle times and improves traceability. Practical benefits for workshop and laboratory workflows The caliper serves as a reliable primary measuring tool for machining, assembly inspection and incoming goods checks, where reproducible results and rapid logging are priorities. Its balanced feature set—robust protection, certified calibration and straightforward digital output—makes it suitable as a calibrated reference in small to medium-sized quality systems. Metav’s stock handling in Emmerich ensures consistent supply and a quality filter for the European market, supporting uninterrupted measurement operations. For traceable, workshop-ready measurement backed by Microtech Metrology’s ISO 17025 calibration, contact Metav Werkzeuge in Emmerich for procurement and technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 141078392C GTIN: 4061905036705 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Resolution: 0.01 mm Display height: 11 mm Measuring force: 8 N Protection class: IP67 Calibration: ISO 17025 Special features Swiss digital display Wireless data output Hardened measuring faces Bidirectional measuring force 8 N Digital readout, wireless data interface FAQ Is a calibration certificate included with the caliper? Yes. The Precision Caliper is supplied fully calibrated with an ISO 17025 calibration certificate, making it suitable for immediate use in traceable quality processes. What accuracy and resolution can be expected from this instrument? The caliper provides a display resolution of 0.01 mm and is calibrated to produce reproducible measurements consistent with its specification for standard inspection tasks. Can the device be used in humid or dusty production areas? The instrument’s IP67 rating ensures protection against dust ingress and temporary immersion, so it is well suited to harsher workshop environments. How is measurement consistency achieved between operators? A defined measuring force of 8 N applied in both directions, together with hardened measuring faces, reduces operator-induced variation and improves repeatability. Which interfaces are available for data collection? This model is equipped with a wireless data output for integration with data loggers and inspection software, enabling direct transfer of measured values into digital records. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Low Measurement Force, Swiss Digital Display 11mm, IP67 Wireless - Microtech Metrology
Benefit from robust wireless data transfer and IP67 protection together with a clear Swiss digital display for reliable shop‑floor measurement and fast documentation; order the Precision Caliper directly via Metav Werkzeuge or request consultation from our technical advisers. Precision Caliper — digital caliper with wireless data and IP67 protection by Microtech Metrology Precision Caliper provides rapid, traceable measurements across the standard workshop range and is designed for industrial quality control and day‑to‑day metrology tasks Wireless data output for direct transfer IP67 protection for harsh environments Swiss 11 mm digital display for easy reading Measuring range 0–300 mm for standard tasks Reliable data transfer for traceable records The caliper's wireless data output simplifies logging and reduces transcription errors in quality documentation, enabling direct transfer to data collection systems. With a Swiss digital display (height 11 mm) the readout remains legible even under workshop lighting, which speeds up inspection cycles and reduces handling time. This combination supports a more efficient quality workflow by linking measurement results to production records without manual re‑entry. Robust construction tuned for workshop use Built to withstand regular use, the instrument carries an IP67 rating for dust and water resistance, so it remains operational during routine cleaning or in humid environments. The robust jaw geometry (jaw lengths 60/21 mm) and a calibrated measuring force of 0.8 N reduce variation from operator handling, improving repeatability across shifts. Classified in the Standard (100–300 mm) category, it balances reach and stiffness for general machining and assembly tasks where a reliable, easy‑to‑handle tool is required. Accuracy and readability designed for quality control The digital caliper offers a clear reading increment of 0.1 mm, displayed on a Swiss module that prioritises contrast and digit height for quick verification. Its digital electronics remove the ambiguity of analogue scales, supporting faster decision‑making on the production line. For procurement and inspection planning, the instrument represents a pragmatic choice when traceability, ease of documentation and ruggedness are weighted equally. Contact Metav Werkzeuge to arrange a technical discussion about the Microtech Metrology Precision Caliper with wireless output and IP67 protection, or to confirm suitability for specific inspection tasks. Technical data Article number: 141077393 GTIN: 4061905036828 Manufacturer: Microtech Metrology eClass: 21170344 Facts Measuring range: 0–300 mm Reading increment: 0.1 mm Measuring force: 0.8 N Display height: 11 mm Jaw length: 60/21 mm Protection class: IP 67 Special features Wireless data output Digital caliper Swiss digital display Digital: true FAQ What measuring range does the instrument cover? The instrument covers a measuring range of 0–300 mm, placing it in the standard category for workshop and machine‑shop inspections. How is measurement data transferred from the caliper? Measurement data is transmitted via the caliper's wireless data output for direct capture in inspection software and documentation systems. Is the display easy to read on the shop floor? Yes; the caliper uses a Swiss digital display with 11 mm character height to ensure clear legibility under typical workshop lighting. Does the caliper offer protection for use in harsher environments? The caliper is rated IP67, providing protection against dust ingress and temporary immersion, suitable for environments that require regular cleaning. Who manufactures this caliper and how is it identified? The caliper is manufactured by Microtech Metrology and is listed under article number 141077393. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Pocket Analog 0.05mm Resolution Monoblock Matt Chrome Inox, Four-Point, Lock Screw - Metav IndustryLine
The compact combination of robust monoblock construction and 0.05 mm vernier accuracy delivers dependable workshop measurements in a pocket-ready format; benefit from a stainless steel body and integrated locking screw for repeatable results. Order the instrument directly via Metav Werkzeuge or consult our advisors for application guidance. Pocket Caliper TOP 300 x 0.05 mm — analogue, monoblock stainless steel The Pocket Caliper TOP 300 x 0.05 mm is a compact analogue caliper designed for everyday workshop and machine‑shop measurement tasks, offering a sturdy monoblock body and a DIN‑compliant vernier. Pocket monoblock stainless steel body Measurement range 0–300 mm Vernier resolution 0.05 mm Includes locking screw and thread table Precision where it matters in the workshop The compact analogue caliper is built for reliable results in routine quality checks. With a measuring range of 0–300 mm and a vernier resolution of 0.05 mm, the instrument fulfils common workshop tolerances while conforming to DIN 862. The monoblock stainless steel construction raises rigidity and reduces flex, which directly improves repeatability for external and internal measurements. The integrated locking screw ensures that a set value remains fixed during transfer or comparison, helping to avoid handling errors. For machinists and maintenance technicians this equates to quicker inspection cycles and fewer rechecks. Designed for portability without compromise This pocket caliper combines portability with substantive workshop features. Weighing 0.43 kg, the tool is light enough for transport yet substantial enough to feel stable in the hand. As an analogue instrument there are no batteries to replace, which simplifies long‑term use and reduces downtime. A thread table printed on the reverse provides quick reference for screw measurements, turning the caliper into a practical multi‑purpose instrument during on‑site checks. The result is increased confidence in fast measurement tasks and a reduced need for multiple tools. Robust finish and versatile measuring functions Engineered for daily use, the caliper features a matt chrome finish over stainless steel for improved wear and corrosion resistance in workshop environments. The vernier scales include a fine top reading (1/128") and additional bottom graduations (1/20–39 mm), enabling classic analogue precision without electronic dependence. The tool supports four measurement functions — external, internal, depth and step — which covers the majority of inspection needs on components and assemblies. These practical attributes make the caliper a reliable choice for production, fitting and maintenance work. For the proven accuracy of the Metav IndustryLine pocket caliper and practical workshop design, contact Metav Werkzeuge for personalised advice and delivery from Emmerich Technical data Article number: M201.077 GTIN: 4054469100494 ECLASS: 21170344 Tariff number: 90173000 SKU: M201.077 Facts Measuring range: 0–300 mm Resolution: 0.05 mm Weight: 0.43 kg Norm: DIN 862 Analogue: yes Special features Material: inox (stainless steel) Monoblock design Vernier: 1/128" top; 1/20–39 mm bottom Locking screw present Thread table on reverse Four measurement functions: inside, outside, depth, step FAQ What accuracy can be expected from this caliper? The Pocket Caliper TOP 300 x 0.05 mm (Metav IndustryLine, SKU M201.077) provides analogue vernier readings to 0.05 mm, meeting standard workshop tolerances under DIN 862. Is the caliper suitable for internal and depth measurements? Yes. The caliper supports external, internal, depth and step measurements as standard, enabling the four measurement functions commonly required in machining and assembly checks. Does the tool require batteries or electronics? No. The instrument is an analogue vernier caliper and operates without batteries, offering maintenance‑free measuring for routine use. What material is the caliper made from and how durable is the finish? The caliper is manufactured from stainless steel (INOX) with a matt chrome finish for enhanced corrosion resistance and long service life in workshop conditions. Is there a reference for thread sizes on the tool? A thread table is printed on the reverse of the caliper for quick reference during screw and thread inspections with the Pocket Caliper TOP 300 x 0.05 mm. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper With Pointed Jaws, Fine Adjustment, Hardened Stainless Steel, 0.02mm Vernier, Supplied In Case - Metav IndustryLine
Combining a hardened stainless steel body with a fine-adjustment mechanism and a 0.02 mm vernier scale delivers repeatable workshop measurements for daily production tasks; order the caliper directly via Metav Werkzeuge or consult the Metav specialists for procurement and application advice. Workshop Caliper M201.303 – stainless, hardened, 300 mm with fine adjustment Workshop Caliper M201.303 is a robust analogue caliper designed for accurate outside, inside and step measurements across general metalworking and assembly tasks. Hardened stainless steel construction Precision scale with 0.02 mm resolution Fine-adjustment thumb screw Monoblock frame with 100 mm jaws Built to last for everyday workshop use The slide and frame are made from stainless steel, hardened for wear resistance and fitted with a matt-chromed scale to reduce glare and preserve legibility under harsh workshop lighting. The monoblock design increases rigidity and reduces torsion during use, which helps maintain measurement accuracy over time. At approximately 0.7 kg, the instrument balances solidity with manageable handling, and the extended 100 mm jaws allow secure gripping of workpieces without sacrificing control. Precise reading and controlled contact force Equipped with a vernier scale that offers 0.02 mm resolution, the caliper ensures measurements that meet typical workshop tolerances. The dual vernier layout provides finely graduated readings—metric graduations supported by a clear secondary scale—while the dedicated fine-adjustment thumb screw permits delicate sliding for exact closure and alignment. These features reduce reading errors and enable reliable measurements for component checks, setup tasks and quality control where consistent, reproducible results are required. Designed for standard workshop ranges and practical use With a measuring range of 0–300 mm, the instrument falls into the Standard category, offering the best compromise between reach and stiffness for everyday machine‑shop and metal‑fabrication work. The caliper is intended for routine dimensional checks on shafts, housings and machined parts, and its construction supports use in fabrication, maintenance and small-series production environments. The tool is delivered to factory standard; the supplied configuration reflects workshop expectations for durability and simple, low‑maintenance operation. Choose the Metav IndustryLine caliper for robust, accurate measurements and contact Metav Werkzeuge for tailored advice and reliable supply direct from Emmerich. Technical Data SKU: M201.303 GTIN: 4054469101262 Weight: 0.7 kg Material: stainless steel, hardened with matt‑chromed scale Label: Workshop Caliper 300 x 100 x 0.02 mm Dimensions & Performance Measuring range: 0–300 mm Jaw length: 100 mm Resolution: 0.02 mm Vernier: top 1/1000 inch, bottom 1/50 mm Tariff number: 90173000 Special features For external, internal and step measurement Monoblock frame for increased rigidity Fine-adjustment thumb screw Factory standard (Werksnorm) Analogue vernier instrument FAQ What measuring range does this caliper cover? The Workshop Caliper M201.303 covers a measuring range of 0–300 mm and is classified in the Standard category for general machine‑shop use. Which materials is the caliper suitable for inspecting? The stainless steel, hardened construction of this vernier caliper makes the instrument suitable for routine inspection of steel, aluminium and similar workshop materials. How fine are the vernier graduations and what accuracy is expected? The vernier provides a 0.02 mm resolution; with correct technique this enables repeatable workshop measurements that meet common machining tolerances. Does the instrument include a fine adjustment for precise sliding? Yes, the caliper features a fine‑adjustment thumb screw to permit controlled sliding and exact alignment when taking measurements. Is this caliper suitable for internal and step measurements as well as outside checks? Yes, the design supports external, internal and step measurements, making it versatile for component inspection and setup tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper With Pointed Jaws, Fine Adjustment, Monoblock, Stainless Hardened Scale, 0.05mm - Metav IndustryLine
Take advantage of the combination of hardened stainless steel, monoblock rigidity and a precise fine adjustment for dependable workshop measurements; order directly via Metav Werkzeuge or contact our consultants for specification advice. Workshop caliper with pointed jaws M201.331.1 — 300 mm, fine adjustment (Metav IndustryLine) The Workshop caliper with pointed jaws M201.331.1 is an analogue precision instrument designed for standard workshop measurements and component inspection, offering robust construction and a vernier scale for reliable repeatability. Monoblock design for enhanced stiffness Hardened stainless steel construction Fine adjustment for precise readings Built for reliable daily use The instrument combines a hardened stainless steel construction with a monoblock design, yielding a rigid beam that resists bending during typical workshop handling. This configuration reduces measurement variation caused by flexing and supports reproducible results across routine inspection tasks. The matt-chromed scale improves legibility under workshop lighting, while the pointed jaw geometry permits access to tight grooves and small features that blunt jaws cannot reach, so tasks such as checking small machined features are carried out with greater confidence. How the analogue vernier supports precise readings This analogue caliper uses a vernier arrangement with a practical resolution of 0.05 mm, backed by a dual-scale nonius: 1/128" on the upper scale and 1/20 mm on the lower scale. The inclusion of a fine adjustment screw enables controlled closure of the jaws, limiting operator-induced error during final reading. The measuring geometry and scale conformity follow DIN 862 for the given jaw length, ensuring the device meets recognised workshop standards for vernier calipers and making interpretation straightforward even for users more familiar with metric indications. Practical handling, protection and workshop suitability With a 300 mm measurement range, this caliper sits in the Standard class — the versatile length preferred across general mechanical and metalworking shops for its balance of reach and stiffness. Delivery in a protective case ensures safe transport and storage, protecting the sliding surfaces and scale during routine movement between workstations. The combination of corrosion-resistant material and a robust finish reduces maintenance needs, promoting long service life in industrial environments where tools are subject to frequent use. Contact Metav Werkzeuge for tailored advice and to secure the Metav IndustryLine workshop caliper M201.331.1 for your toolroom or production line Technical Data Article number: M201.331.1 GTIN: 4054469101668 eCl@ss: 21170344 Label: Werkstatt-Messschieber mit Spitze 300x150x0,05mm rostfrei, mit Feineinstelung, Monoblock, 0,78 kg Facts Measurement range: 0–300 mm Jaw length: 150 mm Resolution: 0.05 mm Vernier: 1/128" (upper) and 1/20 mm (lower) Customs tariff number: 90173000 Special features Material: hardened stainless steel with matt-chromed scale Monoblock design for increased stiffness Fine adjustment screw for controlled closing Analogue vernier (mechanical nonius) Pointed jaws for access to narrow features Protective case included Conforms to DIN 862 for the given jaw length FAQ What measurement range does this caliper cover? The Workshop caliper with pointed jaws M201.331.1 covers a measurement range of 0–300 mm, placing it in the Standard category for general workshop use. What accuracy and resolution can be expected? The instrument offers a practical resolution of 0.05 mm using an analogue vernier; the fine adjustment aids reproducible readings during final closure and measurement. Which materials and finishes are used on the device? The caliper is manufactured from hardened stainless steel and features a matt-chromed scale to enhance corrosion resistance and improve legibility in workshop conditions. Is a case supplied with the caliper? Yes, the M201.331.1 is supplied in a protective case suitable for transport and storage, helping to preserve the sliding surfaces and scale. Does the caliper follow recognised standards? The measuring geometry and scale conform to DIN 862 for the relevant jaw length, ensuring the device aligns with common workshop standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper Workshop Jawless 0.05mm Nonius Matt Chrome Scale, DIN 862 - Metav IndustryLine
Take advantage of a sturdy stainless steel construction, 0.05 mm vernier accuracy and a 300 mm measuring range for reliable workshop measurements; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. M201.392 Workshop Caliper — 300 mm range, 0.05 mm vernier (Metav IndustryLine) The M201.392 is a workshop caliper without pointed jaws, designed for general metalworking and routine dimensional checks in machine shops and toolrooms. 300 mm measuring range 0.05 mm vernier resolution Stainless steel construction, matt‑chromed scale DIN 862 compliant for workshop use Precision and durability for everyday workshop measurement The caliper provides a 300 mm measuring range combined with a 0.05 mm vernier resolution, meeting DIN 862 requirements for workshop instruments. Constructed from stainless steel with a matt‑chromed scale and vernier, the tool balances corrosion resistance with legible contrast on the scale. The extended jaw length (100 mm) improves contact stability, reducing deflection during routine measurements and supporting consistent results across typical machining and assembly tasks. Clear, reliable readings with analogue vernier operation An analogue vernier remains a dependable choice where battery‑free operation and mechanical simplicity are priorities. The graduated vernier offers a 0.05 mm indication and the inch subdivision of 1/128 inch for imperial reference marks. At approximately 0.7 kg, the instrument sits securely in the hand, aiding steady measurement transfer and repeatability. The absence of electronics also simplifies maintenance and long‑term availability of spare parts. Designed to suit workshop workflows and quality checks Made for everyday use in workshops and light industrial settings, the caliper’s material and finish tolerate common shop environments while preserving dimensional stability. The matt‑chrome scale reduces glare under workshop lighting, which helps operators read values faster and reduces misreads. Compliance with recognised standards and a robust build make this instrument a pragmatic choice for routine quality control and production measurement tasks. For a dependable, DIN‑compliant workshop caliper from Metav IndustryLine, contact Metav Werkzeuge for guidance or procurement—info@metav-werkzeuge.com or +49 2822 7131930; request the M201.392 for immediate dispatch. Technical data Article number: M201.392 GTIN: 4054469102108 Manufacturer: Metav IndustryLine Facts Measuring range: 0–300 mm Resolution (vernier): 0.05 mm Inch reading: 1/128 inch Jaw length: 100 mm Weight: 0.7 kg Standard: DIN 862 Tariff number: 90173000 Special features Material: stainless steel; scale and vernier matt‑chromed Analog vernier display (no batteries) Workshop version without pointed jaws eClass: 21170344 FAQ How precise is the M201.392 for routine workshop measurements? The M201.392 offers a vernier resolution of 0.05 mm and conforms to DIN 862, making it suitable for standard machine‑shop tolerances and general quality control. Does the caliper provide imperial readings? Yes. The analogue vernier includes an imperial subdivision equivalent to 1/128 inch for quick inch‑based references alongside metric measurements. Is the caliper suitable for metalworking environments? The caliper’s stainless steel construction and matt‑chromed scale are designed for workshop conditions and common metalworking applications; it is robust enough for daily use in machine shops. What measurements can be taken with this workshop caliper? The instrument supports typical caliper functions such as external and internal measurements and depth gauging, suitable for parts and assemblies within the 0–300 mm range. How does the M201.392 compare to digital calipers for shop use? As an analogue instrument, the M201.392 requires no batteries and offers mechanically straightforward, reliable readings; it is particularly valued where simplicity, durability and compliance with DIN 862 are preferred. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper Workshop Jawless 0.05mm Vernier With Fine Adjustment, Hardened Stainless Steel Case - Metav IndustryLine
Take advantage of precise daily measuring with a hardened stainless‑steel frame and a reliable 0.05 mm vernier — ideal for routine workshop tasks where robustness and clear readings matter. Benefit from the fine‑adjustment thumbwheel and the monoblock construction for steady, repeatable measurements. Order via Metav Werkzeuge or consult the Metav team for specification guidance. Metav IndustryLine Workshop Caliper M201.321.1 — 300 mm, hardened stainless, 0.05 mm resolution The Metav IndustryLine workshop caliper M201.321.1 is a durable analogue caliper designed for general machine‑shop and maintenance use, offering clear vernier readings and a precision thumbwheel for controlled jaws movement. Hardened stainless steel construction Fine‑adjustment thumbwheel for precise setting Vernier resolution of 0.05 mm Monoblock frame for increased stability Reliable workshop accuracy and practical classification The caliper is built for the standard range of workshop measuring tasks: its 0–300 mm span places it in the Standard category, offering the best compromise between reach and stiffness for everyday machine‑shop work. With an analogue vernier resolution of 0.05 mm, the instrument matches the industrial benchmark for mechanical calipers and is suitable for routine dimensional checks on assembled parts and components. The hardened stainless‑steel body resists wear and maintains measurement geometry, so readings stay consistent even after repeated daily use. Controlled setting and robust design for repeatable results A dedicated fine‑adjustment thumbwheel enables controlled closure of the jaws, reducing measurement scatter caused by manual over‑pressing and improving repeatability during series checks. The monoblock frame increases torsional rigidity compared with split‑body designs, improving stability when measuring longer jaws such as the 150 mm beak length supplied. The matt‑chromed scale reduces glare and eases reading under workshop lighting, while hardened surfaces extend service life under abrasive or oily conditions. Standards, scale and practical handling explained The vernier scale follows recognised workshop conventions and the instrument references DIN 862 for jaw geometries where applicable, which supports straightforward interpretation of mechanical tolerances on drawings. Reading the vernier at 0.05 mm resolution is intuitive for trained staff and provides the speed of analogue operation without dependence on batteries or electronics. The caliper’s simple mechanical design reduces downtime and maintenance requirements, making it a pragmatic choice for manufacturing, maintenance and toolroom environments. Choose the Metav IndustryLine workshop caliper for reliable everyday precision and contact Metav Werkzeuge in Emmerich for tailored advice and purchasing support Technical data Article number: M201.321.1 GTIN: 4054469101439 eClass: 21170344 Category: Calipers Label: Werkstatt‑Messschieber ohne Spitze 300x150x0,05mm rostfrei, mit Feineinstellung Facts Measuring range: 0–300 mm Maximum measuring range (mm): 300 Jaw (beak) length (mm): 150 Resolution: 0.05 mm SKU: M201.321.1 Special features Material: hardened stainless steel with matt‑chromed scale Construction: monoblock frame Scale type: analogue vernier Fine adjustment: thumbwheel for precise jaw control Norms: DIN 862 (applies up to specified jaw lengths) FAQ What measuring range does the Metav IndustryLine workshop caliper M201.321.1 cover? The Metav IndustryLine workshop caliper M201.321.1 covers a measuring range of 0–300 mm, placing it in the Standard class commonly used across machine shops and maintenance departments. What is the resolution and typical precision of the vernier on this caliper? The vernier provides a resolution of 0.05 mm, which corresponds to the industrially accepted analogue standard for mechanical calipers and suits most workshop tolerance checks. Which materials and finish are used on the M201.321.1 caliper? The caliper is manufactured from hardened stainless steel and features a matt‑chromed scale to reduce reflections and improve legibility in typical workshop lighting. Is the design of this caliper suited to frequent workshop use? The M201.321.1’s monoblock construction, hardened surfaces and fine‑adjustment thumbwheel make it well suited for frequent daily use, offering robust handling and repeatable measurements. Which scale standard applies to the jaws and how does this affect measurements? Jaw geometries reference DIN 862 where applicable, ensuring compatibility with conventional measurement practice and predictable functional behaviour for typical workshop applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper Workshop Version Fine Adjustment Stainless Steel Matt Chrome Scale DIN 862 - Metav IndustryLine
Benefit from a robust, hardened stainless steel construction, precise fine adjustment and vernier accuracy across a 0–300 mm range for reliable workshop measurements; order the instrument directly via Metav Werkzeuge or consult the Metav team for tailored advice. M201.321.2 Workshop Caliper — analogue vernier, 300 mm, fine adjustment (Metav IndustryLine) M201.321.2 is a workshop caliper designed for general machining and maintenance tasks, offering metric and imperial vernier readings and a robust monoblock construction for repeatable measurements up to 300 mm. Hardened stainless steel construction Fine-adjustment screw for controlled travel Vernier resolution 0.05 mm and 1/128" Monoblock frame for long-term stability Dependable precision for everyday workshop work The instrument provides reliable metrology where repeatability matters. Its hardened stainless steel body and matt‑chromed scale resist wear, so scale legibility and dimensional integrity are preserved in daily use. The caliper’s vernier arrangement gives a metric resolution of 0.05 mm (bottom scale) alongside an imperial 1/128" indication (top scale), which simplifies cross‑referencing between systems and reduces conversion errors during production. This combination of materials and scale design supports efficient quality control and lowers the risk of rework in routine machining and assembly. Robust design that reduces measurement uncertainty A monoblock construction minimises flex and improves stiffness along the length of the slide, while the integrated fine adjustment screw allows slow, controlled closing of the jaws for reproducible seating on the workpiece. The instrument’s jaw length of 100 mm gives a practical contact area for standard components, balancing reach and rigidity—attributes that maintain consistent results across repeated cycles. The analogue vernier layout avoids electronic dependency, making the caliper exceptionally suitable for workshop environments where robustness and low maintenance are priorities. Clear reading and standards-based manufacture Graduated according to accepted norms, the caliper complies with DIN 862 for the specified jaw dimensions, ensuring compatibility with established inspection practices. The vernier principle is straightforward to apply: align the zero for coarse reading and read the vernier for fine increments to obtain the measurement with 0.05 mm precision; the imperial vernier provides an additional quick-check in inches. For technicians familiar with mechanical measuring tools, the analogue format delivers a direct, tactile measuring experience that is both predictable and serviceable. Contact Metav Werkzeuge for further specification details or ordering support — Metav’s Emmerich location ensures consistent supply and pragmatic advice for workshop measurement needs: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M201.321.2 GTIN: 4054469101446 ECLASS: 21170344 Facts Measuring range: 0–300 mm Jaw length: 100 mm Resolution/vernier: 1/20 mm (0.05 mm) bottom; 1/128" top Norm: DIN 862 (for applicable jaw lengths) Analogue instrument, vernier type Special features Material: hardened stainless steel with matt‑chromed scale Fine‑adjustment screw Monoblock frame for improved stiffness Designed for outside, inside and step measurements FAQ How precise is the reading on this workshop caliper? The caliper delivers a metric vernier resolution of 0.05 mm (1/20 mm) and an imperial vernier of 1/128", providing workshop‑grade precision suitable for standard machine‑shop quality checks. Is the caliper suitable for daily shop use and harsher environments? Yes; the hardened stainless steel construction and matt‑chromed scale enhance durability and legibility, making the instrument well suited to regular workshop conditions. Does the instrument follow a recognised norm? The design follows DIN 862 requirements for the applicable jaw lengths, ensuring that dimensional references and inspection practices remain compatible with industry standards. What is the benefit of the fine‑adjustment screw? The fine adjustment allows controlled jaw travel for reproducible contact and reduced operator‑induced variation, improving measurement consistency on delicate or small contact surfaces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Digital Caliper 0.01mm Resolution, 9mm Display, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a tough, shop-floor ready digital caliper that combines a 0–300 mm measuring range, 0.01 mm resolution and IP67 protection with full traceability via an ISO 17025 calibration certificate; order directly through Metav Werkzeuge or consult our advisors for tailored delivery and documentation. Precision Caliper — Digital, IP67 protected, ISO 17025 calibrated (Microtech Metrology) The Precision Caliper is a digital measuring instrument for workshop and quality-control applications, offering a 0–300 mm measuring range, a clear 9 mm digit display and full ISO 17025 calibration for traceable results Digital display with 9 mm digits Resolution 0.01 mm, high readout clarity IP67 dust and water protection Delivered fully ISO 17025 calibrated Precision and traceability for quality assurance This digital measuring instrument covers the standard workshop range of 0–300 mm, delivering a fine 0.01 mm display step and a stated accuracy of ±0.03 mm, which aligns with established workshop tolerances for calibrated instruments. Supplied fully calibrated to ISO 17025, the unit arrives with a calibration certificate, ensuring measurement results are traceable and suitable for internal quality control or supplier declarations. The documented calibration removes uncertainty in audits and supports reproducible inspection routines. Built for the workshop: robust protection and reliable operation With an IP67 rating, the device is sealed against dust ingress and temporary immersion, so electronics remain protected in harsher production environments. The sealed construction reduces the risk of downtime from coolant or particulate contamination, while the integrated depth gauge extends functionality to depth measurements without additional tools. This combination of protection and multi‑function capability optimises plant-floor uptime and simplifies inspection workflows. Clear readout and ergonomic handling to speed inspection A high-contrast digital display with 9 mm digits provides excellent legibility at typical bench distances, reducing reading errors and speeding up routine checks. The caliper’s control layout and measurement functions have been designed for efficient operation by shop-floor personnel and quality inspectors, so measurement cycles are faster and less error-prone than manual vernier reading. The instrument’s straightforward interface supports consistent results across multiple operators. Traceable supply and service from a dedicated partner Distributed through Metav Werkzeuge, the caliper benefits from a supplier focused on making precision accessible for industry and craft alike. Metav’s European presence ensures reliable dispatch from Emmerich and a documented quality filter for incoming goods. Backed by thousands of satisfied customers and an extensive product range, Metav supports integration of calibrated measuring tools into standardised workflows and production documentation. Contact Metav Werkzeuge in Emmerich for expert advice on integrating this ISO 17025 calibrated digital caliper into inspection routines and for information on delivery and documentation options Technical Data Article number: 141085302 GTIN: 4061905451492 Brand: Microtech Metrology Digital display: yes Digit height: 9 mm Facts Measuring range: 0–300 mm Resolution: 0.01 mm Display accuracy: ±0.03 mm Protection rating: IP67 Special features Depth gauge included Delivered calibrated to ISO 17025 with certificate Classification: Standard (100–300 mm range) eClass: 21170344 FAQ Is this caliper suitable for general workshop quality control? Yes. The Precision Caliper with a 0–300 mm range, 0.01 mm resolution and ±0.03 mm accuracy is designed for standard machine‑shop and metalworking inspection tasks and aligns with typical workshop quality-control requirements. What does the supplied ISO 17025 calibration include? The delivery includes a full calibration performed to ISO 17025 standards and a calibration certificate, documenting traceability and measurement performance for audit and quality records. Can the instrument be used at the machine or in coolant-prone areas? The IP67 protection rating indicates the caliper is sealed against dust and temporary immersion, making it suitable for controlled use near machines and in areas where occasional splash or coolant exposure may occur. Does the caliper measure depths as well as internal and external dimensions? Yes. The caliper features an integrated depth gauge for depth measurements in addition to standard internal and external dimensions. Which brand and article number should be quoted when ordering or requesting documentation? Please quote Microtech Metrology and Article number 141085302 when enquiring about specifications, calibration records or ordering. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Digital Caliper Colour Touchscreen, IP54, ISO 17025 Calibrated - Microtech Metrology
The combination of a stainless steel construction, ISO 17025 calibration and flexible Wireless + USB data transfer supports precise, traceable measurements and efficient workflow integration. Order the built-in caliper directly via Metav Werkzeuge or ask the consultants for application advice. Built-in caliper — Digital standard caliper with wireless + USB and colour touchscreen (Microtech Metrology) Built-in caliper for standard workshop and production measurement tasks, offering a 0–300 mm measuring range with industrial connectivity for integration into inspection and production workflows Standard measuring range 0–300 mm ISO 17025 calibrated with certificate Colour 1.54" touchscreen display Wireless + USB data output Precision that fits everyday production needs This digital measuring instrument is designed for the standard caliper class (measuring range 0–300 mm), which provides an effective balance between reach and stiffness for general machining and inspection tasks. The instrument delivers a reading resolution of 0.005 mm and a stated accuracy of ±0.02 mm, values that meet common workshop and machine-shop quality-control requirements. By selecting a device with a stainless steel frame and the specified tolerances, the measurement process becomes reproducible and suitable for routine component checks and incoming‑goods inspection. Faster workflows through integrated connectivity Data transfer is available via Wireless + USB, allowing measured values to be logged directly into inspection software or connected data-collection systems without manual transcription. The colour 1.54" touchscreen provides clear numeric readout and simple on-screen controls, reducing operator handling time and lowering the risk of transcription errors. These features combine to shorten the inspection loop and support traceable documentation for quality records. Robust design and certified calibration for traceability Constructed from stainless steel with IP54 protection, the instrument resists workshop contaminants while remaining serviceable in regular production environments. The device is delivered fully calibrated under ISO 17025 standards and includes the calibration certificate, ensuring traceability for audits and compliance checks. This makes the caliper suitable where documented measurement provenance is required, for example in supplier qualification or internal quality management. Where this caliper adds value on the shop floor The built-in form factor simplifies installation into measurement stations or fixtures where a fixed, easy-to-read measuring element is preferred. The combination of a robust housing, tactile touchscreen and standardised data interfaces supports integration into digital inspection routines and contributes to consistent quality control across shifts. The instrument is therefore well suited to machine shops, maintenance departments and small-series production where reliable, repeatable measuring is essential. For assured precision and documented traceability, contact Metav Werkzeuge to discuss how the Microtech Metrology built-in caliper can be integrated into existing workflows or to request the calibration certificate and ordering details; Metav Werkzeuge handles delivery from Emmerich and can advise on technical requirements Technical Data Article number: 142503140 GTIN: 4061905037337 Brand: Microtech Metrology Material: stainless steel Measuring range: 0–300 mm Resolution: 0.005 mm Accuracy: ±0.02 mm Display: Colour 1.54" touchscreen Data output: Wireless + USB Protection class: IP54 Digital: yes ISO 17025 calibration: included Facts Measuring range max: 300 mm eClass: 21170344 SKU: 142503140 Special features Built-in design Wireless + USB interface Delivered with calibration certificate Stainless steel construction FAQ What measuring range does this caliper cover? The built-in caliper covers a measuring range of 0–300 mm, corresponding to the standard class suitable for general machine‑shop and workshop tasks. Is the instrument supplied calibrated and traceable? Yes — the caliper is delivered fully calibrated under ISO 17025 and includes the calibration certificate for traceability. Which interfaces are available for data transfer? Measurement values can be exported via Wireless + USB, enabling direct connection to inspection software or data-capture systems. What protection does the unit offer against workshop contaminants? The instrument has an IP54 rating, providing resistance against dust ingress and splashing water in typical workshop conditions. What is the declared accuracy and resolution? Declared resolution is 0.005 mm with an accuracy of ±0.02 mm, making it suitable for standard production quality control. Can this caliper be integrated into a fixed measurement station? Yes — the built‑in design is intended for installation in fixtures or stations where a fixed measuring element and stable readout are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Pocket Caliper 0.05mm Parallax-Free, Three-Point Readings, Locking Screw, Monoblock, DIN 862, Plastic Case - Metav IndustryLine
Compact pocket form, parallax‑free scale and a secure locking screw combine to deliver reliable, repeatable readings for everyday workshop use; the matt‑chrome, stainless‑steel body ensures long service life and stable measuring. Order the caliper directly via Metav Werkzeuge or contact our consultants for tailored advice. Pocket caliper M201.107 – 0–300 mm, 0.05 mm resolution (Metav IndustryLine) The Pocket caliper M201.107 is a compact, parallax‑free analogue caliper for workshop and maintenance applications, designed for precise outside, inside, depth and step measurements up to 300 mm. Parallax‑free scale for reliable readings Locking screw and monoblock stability Stainless steel construction, matt chrome finish Four‑way measurement: inside/outside/depth/step Precision that speeds up inspection and reduces rework The compact design provides a dependable measuring solution with a 0–300 mm range and 0.05 mm reading increments, conforming to DIN 862 standards for mechanical calipers. The parallax‑free scale improves reading accuracy under workshop lighting and at different viewing angles, while the locking screw secures the slider for consistent repeat measurements. These characteristics reduce inspection time and the risk of rework by making initial readings more trustworthy; the short, stiff jaws typical of pocket formats maintain stability when measuring small parts or confined features. Robust build and handling for daily use Constructed from stainless steel with a matt‑chrome finish and a monoblock slider, the instrument resists corrosion and holds alignment during regular handling. The compact footprint and low weight make benchwork and mobile inspection straightforward, while the integrated depth gauge expands usability to bores and recesses. A thread chart printed on the reverse side supports quick reference for common fastener checks. Delivered in a protective case for transport and storage, the caliper remains ready for service when moved between workstations. Practical measuring features explained Four‑way measurement capability covers outside, inside, depth and step readings without accessory changes, streamlining everyday checks. The analogue nonius offers a tactile feel and immediate visual confirmation, suited to conventional workshop workflows where electronic integration is not required. Compliance with DIN 862 signals industrial suitability: readings at the stated 0.05 mm resolution meet typical machining and maintenance tolerances, making this caliper a pragmatic choice for metalworking and general engineering tasks. Contact Metav Werkzeuge for supply and application advice on the M201.107 pocket caliper or to arrange a technical consultation tailored to workshop needs. Technical data Article number: M201.107 GTIN: 4054469100548 Category: calipers Standard: DIN 862 Facts Measuring range: 0–300 mm Reading: 0.05 mm Type: analogue (nonius) Customs tariff number: 90173000 Special features Parallax‑free reading Locking screw (Feststellschraube) Monoblock slider Material: stainless steel (inox) Matt‑chrome finish Depth gauge included Thread chart on reverse side Delivered in a protective case Four‑way measurement: inside/outside/depth/step FAQ What measuring tasks is this caliper best suited for? The pocket caliper M201.107 is ideal for routine workshop checks, small‑part inspection and maintenance tasks where a 0–300 mm range and 0.05 mm resolution are appropriate. Does the instrument support inside and depth measurements? Yes. The design includes four‑way measurement functionality for inside, outside, depth and step readings, so the M201.107 covers these measurement types without additional attachments. Is the caliper corrosion resistant for use in mixed environments? The body is made from stainless steel with a matt‑chrome finish, providing good resistance to workshop humidity and light contamination. Does the caliper meet recognised standards for mechanical measuring tools? The instrument is produced to DIN 862 for mechanical calipers, offering the familiar accuracy class expected in industrial and maintenance environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Thickness Caliper With Microcomputer, Colour 1.5" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of fast data export and assured traceability through an ISO 17025-calibrated workflow combined with a 1.5" colour touchscreen and Wireless + USB connectivity for uninterrupted production measurement. Order the thickness caliper directly via Metav Werkzeuge or ask our consultants if needed. Thickness Caliper by Microtech Metrology — Digital caliper with 1.5" colour touchscreen and Wireless + USB Thickness Caliper is a digitally equipped measuring tool for precise 2D thickness and profile checks across workshop and quality‑control processes, designed for standard workshop ranges up to 300 mm. ISO 17025-calibrated with certificate 1.5" colour touchscreen for clear readouts Wireless and USB data transfer options 0.03 mm accuracy for reliable repeatability Accurate measurement that fits the workshop routine The digital thickness gauge combines mechanical robustness with an integrated microcomputer to deliver repeatable thickness and 2D measurements across its X/Z range of 0–300 / 0–150 mm. The device’s rated accuracy of ±0.03 mm makes it suitable for general machine‑shop QC tasks where dependable tolerances are required. As a Standard class caliper, it balances reach and stiffness — the 300 mm maximum range covers the most common workshop needs while preserving good handling and one‑hand operation. The 1.5" colour touchscreen provides immediate numeric and graphical feedback, reducing interpretation errors and accelerating routine inspection cycles. Modern data flow for faster process control Connectivity is configured for contemporary production environments: Wireless transmission and USB output enable direct logging into SPC systems or temporary data capture without interrupting measurement throughput. The integrated microcomputer supports 2D measurement modes, so dimensional checks and thickness profiles can be recorded and exported with minimal manual transcription. This practical data handling reduces administrative time and supports faster decision‑making on the shopfloor, improving overall process efficiency and traceability. Calibrated readiness and documented traceability Delivered fully ISO 17025 calibrated, the instrument comes with a traceable calibration certificate, meeting the documentation requirements of quality departments and audits. This calibrated status removes the initial calibration step from procurement to operation, enabling immediate use in inspection routines and guaranteeing a known uncertainty that can be entered directly into quality records. The combination of certified calibration and digital data output simplifies compliance and supports reliable measurement history for batch reports. Designed for everyday robustness and usability Built as a digital caliper for routine industrial use, the construction favours durability and repeatable operation. The measurement system is optimised for thickness and profile inspection, and the touchscreen interface reduces menu complexity for repeat tasks. Wireless and USB options offer flexibility: local logging during benchwork, or networked transfer for centralised quality control. Combined, these features cut cycle time and increase measured parts throughput while maintaining consistent results. For procurement or technical advice on Microtech Metrology’s calibrated thickness caliper, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss delivery and integration into existing inspection routines Technical data Article number: 149020307 GTIN: 4061905045462 Manufacturer: Microtech Metrology Core specifications Measurement range X: 0–300 mm; Z: 0–150 mm Maximum range: 300 mm Accuracy: ±0.03 mm Display: 1.5" colour touchscreen Data output: Wireless, USB Digital: yes Special features Digital caliper with integrated microcomputer for 2D measurements ISO 17025 calibration with certificate included Wireless and USB connectivity Suitable for standard workshop and machine‑shop QC FAQ What measurement range does the caliper cover? The instrument’s measurement range is specified as X: 0–300 mm and Z: 0–150 mm, providing the standard workshop reach for most component thickness checks. Is the caliper supplied calibrated? Yes — the caliper is delivered fully calibrated according to ISO 17025 and includes a calibration certificate for immediate use in documented quality procedures. How is measurement data exported from the device? Measurement values can be transferred via Wireless connection or USB, enabling integration with statistical process control or simple data logging workflows. What accuracy can be expected in routine use? The device is specified with an accuracy of ±0.03 mm, suitable for general machine‑shop quality control tasks within the standard caliper category. Which applications suit this instrument best? The caliper is optimised for thickness and 2D profile measurements in manufacturing and inspection areas where the 300 mm range and 0.03 mm accuracy meet production tolerances. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Werkstatt-Messschieber mit Spitzen, 0,02mm, Feineinstellung, Werksnorm - Metav IndustryLine
Die außerordentlichen Bewertungen von Metav Werkzeuge stehen für über 42.000 glückliche Kunden. Probiere es aus und shoppe auf metav-shop.de.! HIGHLIGHTS für Metav IndustryLine Werkstatt-Messschieber mit Spitzen Messbereich: bis 300mm Ablesung: 0,02mm Material: Spezialstahl, Skala und Nonius mattverchromt : 0 bis 300mm - Reichweite, die passt Mit bis 300mm steht ein ausgewogener Rahmen für häufige Prüfaufgaben bereit. Werkstücke unterschiedlicher Länge bleiben innerhalb eines komfortablen Fensters. Im Maschinen- und Metallbau führt der Bereich zu klaren Ergebnissen bei minimalem Aufwand. Die Abläufe wirken aufgeräumt und wiederholgenau. Das stärkt Qualität und Tempo gleichermaßen. Unsere Definition der EInteilung der Messbereiche. Klassifizierung Messbereiche beim Messschieber.. Werksnorm Unser Werkstatt-Messschieber wird vollständig nach den einschlägigen DIN-Normen gefertigt – sämtliche Materialien, Fertigungs- und Kalibrierverfahren entsprechen den Anforderungen der Werksnorm. Damit sind Maßhaltigkeit und Wiederholgenauigkeit garantiert, Prüfzertifikate sind international kompatibel, und Audits oder Kundenfreigaben lassen sich deutlich schneller durchlaufen. Die DIN-Konformität sichert konstante Qualität, erleichtert die weltweite Einsetzbarkeit und stärkt das Vertrauen in jedes einzelne Messergebnis. Die Premium Messwerkzeuge von Metav IndustryLine werden von unseren Experten für Messwerkzeuge empfohlen. Metav IndustryLine steht für Premium Messwerkzeuge zu einem annehmbaren Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Produktdetails: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber Bestellnummer: M201.022 Zahlen & Fakten: Messbereich: 0-300mm Gewicht: 0,7kg Norm: Werksnorm Schnabellänge: 60mm Ablesung: 0,02mm Ausführungen Ausführung: analog Material: Spezialstahl, Skala und Nonius mattverchromt Lieferung im Kasten mit Feineinstellung mit Spitzen Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Erwägungen beim Beschaffen eines Messschiebers: Neben der Präzision und dem Betriebsbereich sind erweiterte Eigenschaften wie die Funktionalität zum Datenoutput oder die Messkraftverwaltung von großer Signifikanz. Im Umfeld der Qualitätssicherung und in Laboreinrichtungen ist ein Messschieber mit kontrollierter Anwendungskraft besonders hilfreich. Des Weiteren ist die Überlegung entscheidend, ob eine Kalibrierung gewünscht ist. Eine Kalibrierung kann direkt nach Lieferung vorgenommen werden und sollte zur Sicherung der Prozessqualität jedes Jahr erneuert werden. Pflegehinweis - damit Sie lange etwas von Ihrem Messwerkzeug von Metav IndustryLine haben: Werkstatt-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
300mm Werkstatt-Messschieber mit Spitzen, 0,05mm, Feineinstellung, Werksnorm - Metav IndustryLine
Die exzellenten Bewertungen von Metav Werkzeuge stehen für mehr als 42.000 begeisterte Kunden. Überzeuge Dich selbst und bestelle bei metav-shop.de! Das wichtigste mit Spitzen Messbereich: bis 300mm Ablesung: 0,05mm Material: Spezialstahl, Skala und Nonius mattverchromt : –300mm - Reichweite, die passt Mit bis 300mm steht ein ausgewogener Rahmen für häufige Prüfaufgaben bereit. Werkstücke unterschiedlicher Länge bleiben innerhalb eines komfortablen Fensters. Im Maschinen- und Metallbau führt der Bereich zu klaren Ergebnissen bei minimalem Aufwand. Die Abläufe wirken aufgeräumt und wiederholgenau. Das stärkt Qualität und Tempo gleichermaßen. Unsere Definition der EInteilung der Messbereiche. Klassifizierung Messbereiche beim Messschieber.. Werksnorm Alle Komponenten unseres Werkstatt-Messschieber werden konsequent gemäß Werksnorm gefertigt. Die Norm definiert präzise Vorgaben für Werkstoffe, Toleranzen, Fertigungsabläufe und Kalibrierprotokolle. Durch die strikte Einhaltung dieser Spezifikationen sichern wir Maßhaltigkeit, Reproduzierbarkeit und die weltweite Anerkennung der Prüfzertifikate – entscheidende Faktoren für Audit- und Freigabeprozesse. Die Premium Messwerkzeuge von Metav IndustryLine werden von unseren Experten für Messwerkzeuge empfohlen. Metav IndustryLine steht für hervorragende Messwerkzeuge zu einem annehmbaren Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Feineinstellung Die Feineinstellung (auch Feinverstellung) ist eine kleine Rändel- oder Daumenschraube, über die der bewegliche Schieber eines Messschiebers mit sehr feinen, kontrollierten Schritten verfahren wird. Damit kann man die Backen genau und ohne Spiel anlegen, die Messkraft stabil halten und den Messwert einstellen, ohne dass man versehentlich darüber hinaus misst. Dies führt zu höherer Genauigkeit, besserer Wiederholbarkeit der Messergebnisse und erhöhter Benutzerfreundlichkeit, vor allem bei großen oder besonders hochwertigen Werkstatt-Messschiebern. Unsicher, ob das Werkzeug das Richtige ist? Oder fehlen technische Daten? Sprechen Sie uns einfach an! 📧 eMail: info@metav-werkzeuge.com, ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Produktmerkmale: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber Bestellnummer: M201.021 Zahlen / Daten: Messbereich: 0 bis 300mm Gewicht: 0,7kg Norm: Werksnorm Schnabellänge: 60mm Ablesung: 0,05mm Besonderheiten Ausführung: analog Material: Spezialstahl, Skala und Nonius mattverchromt Lieferung im Kasten mit Feineinstellung mit Spitzen Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Zu beachtende Faktoren beim Erwerb eines Messschiebers: Die zusätzliche Ausstattung, darunter Datenausgänge und Messkraftkontrollen, erlangt neben der Genauigkeit und dem Messbereich erhebliche Bedeutung. Das Arbeiten mit einem Messschieber, der eine exakt eingestellte Messkraft aufweist, ist in der Qualitätssicherung und bei Labortätigkeiten von großem Nutzen. Man sollte auch berücksichtigen, ob der ausgewählte Messschieber kalibriert werden muss. Die Möglichkeit zur Kalibrierung besteht unmittelbar bei Entgegennahme; zur Sicherstellung der Prozessstabilität sollte regelmäßig jährlich neu kalibriert werden. Pflegehinweis - damit Sie lange etwas von Ihrem Messwerkzeug haben: Werkstatt-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
300mm Werkstatt-Messschieber mit Spitzen, 0,05mm, Feineinstellung, Werksnorm - Metav IndustryLine
Der von Ludwig Josef Bayer 1989 gegründete Traditionsvertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für Premium-Messwerkzeuge zu einem kleinem Preis. HIGHLIGHTS mit Spitzen Messbereich: bis 300mm Ablesung: 0,05mm Material: Spezialstahl, Skala und Nonius mattverchromt Routinen stärken mit Mit von 0 – 300mm decken den Bedarf im Tagesgeschäft zuverlässig ab. Flächen, Kanten und Abschnitte lassen sich sicher ansteuern, auch bei wechselnden Geometrien. Der Bereich unterstützt strukturierte Abläufe im Maschinen- und Metallbau und hält Reserven für Sonderfälle bereit. Gleichmäßige Messfolgen bringen Ruhe in die Fertigung. So bleibt Präzision planbar – vom ersten Griff bis zur Freigabe. Unsere Definition der EInteilung der Messbereiche. Klassifizierung Messbereiche beim Messschieber.. Werksnorm Gefertigt nach Werksnorm: Unser Messwerkzeug erfüllt alle Normvorgaben für Material, Fertigung und Kalibrierung. So sind Präzision, Wiederholgenauigkeit und internationale Zertifizierung jederzeit gewährleistet – für reibungslose Audits und uneingeschränktes Vertrauen. Die Messwerkzeuge von Metav IndustryLine werden von unseren Profis für Messwerkzeuge empfohlen. Metav IndustryLine steht für Premium Messwerkzeuge zu einem unschlagbaren Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Sie wissen nicht genau, ob dieses Werkzeug zu Ihrer Anwendung passt? Oder Ihnen fehlen noch wichtige technische Details? Kein Problem! Kontaktieren Sie uns – wir beraten Sie gerne. ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Produkteigenschaften für den Werkstatt-Messschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber Bestellnummer: M201.031 Fakten zum Werkzeug: Messbereich: 0-300mm Gewicht: 0,7kg Norm: Werksnorm Schnabellänge: 90mm Ablesung: 0,05mm Besonderheiten Ausführung: analog Material: Spezialstahl, Skala und Nonius mattverchromt Lieferung im Kasten mit Feineinstellung mit Spitzen Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf man achten sollte, wenn man einen Messschieber kaufen möchte: Während Präzision und Messbereich wesentliche Aspekte sind, darf die Berücksichtigung von Funktionen wie Datentransfer und Messkraftkontrolle nicht unterschätzt werden. Messschieber mit spezifizierter Messkraft bietet insbesondere bei Qualitätssicherungsprozessen und in laboratory setups Vorteile. Des Weiteren ist die Überlegung entscheidend, ob eine Kalibrierung gewünscht ist. Die Möglichkeit zur Kalibrierung besteht unmittelbar bei Entgegennahme; zur Sicherstellung der Prozessstabilität sollte regelmäßig jährlich neu kalibriert werden. Pflegehinweis - damit Sie lange etwas von Ihrem Werkstatt-Messschieber von Metav IndustryLine haben: Werkstatt-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
300mm Werkstatt-Messschieber, 0,05mm, Werksnorm - Metav IndustryLine
Die hervorragenden Bewertungen von Metav Werkzeuge stehen für über 42.000 hochzufriedene Kunden. Überzeuge Dich selbst und bestelle bei metav-shop.de! Verlässlich im Alltag 300mm schaffen genau die Reichweite, die im Alltag am häufigsten gebraucht wird. Von der Vormontage bis zur Endprüfung bleibt der Zugriff auf relevante Maße erhalten. Der Bereich passt zu den Anforderungen im Maschinen- und Metallbau und sorgt für gleichmäßige Qualität. Messfolgen bleiben übersichtlich und planbar. Das reduziert Stillstände und hält Projekte auf Kurs. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber.. Verlässliche Präzision durch Fertigung nach weltweit gültigen Standards Unser Messwerkzeug basiert vollständig auf den Richtlinien der Werksnorm. Dies betrifft sämtliche Produktionsschritte und Kalibrierverfahren ebenso wie die eingesetzten Materialien. Die so gewährleistete Maßhaltigkeit und Wiederholgenauigkeit sorgt für einheitliche Qualitätsstandards und internationale Vergleichbarkeit – ein entscheidender Vorteil bei Audits und Kundenfreigaben. Expertenrat: Wie pflegt und lagert man einen analogen Messschieber? Nach Gebrauch leicht ölen (säure- und harzfreies Feinöl) und in der Kassette staub- sowie korrosionsgeschützt aufbewahren. Bei „hakendem“ Lauf hilft ein Tropfen Öl auf Führungsschiene und Schieber. Sie sind unsicher, ob das Werkzeug für Ihre Anwendung geeignet ist? Oder benötigen Sie weitere technische Informationen? Kein Problem – sprechen Sie uns gerne an! 📧 eMail: info@metav-werkzeuge.com, ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Spezifikationen zumWerkstatt-Messschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber leichte Ausführung Bestellnummer: M201.375 Fakten zum Werkzeug: Messbereich: 0 bis 300mm Gewicht: 0,8kg Norm: Werksnorm Schnabellänge: 100/36mm Ablesung: 0,05mm Ablesung in Inch/Zoll: 1/128 Besonderheiten Ausführung: analog Material: rostfreier Stahl, Skala und Nonius mattverchromt leichte Ausführung Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Wichtige Aspekte beim Erwerb eines Messschiebers: Neben Genauigkeit und Messbereich spielen Zusatzfunktionen wie Datenausgang oder Messkraftkontrolle eine wichtige Rolle. Der Einsatz eines Messschiebers mit kontrollierter Messkraft ist besonders in der Qualitätssicherung und in Laborumgebungen vorteilhaft. Des Weiteren ist die Überlegung entscheidend, ob eine Kalibrierung gewünscht ist. Bereits bei der Zustellung ist eine Kalibrierung möglich, und für die Garantie der Prozesssicherheit sollte diese jährlich wiederholt werden. Pflegehinweis - damit Sie lange etwas von Ihrem Messwerkzeug haben: Werkstatt-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com