Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
300mm Werkstatt-Messschieber, 0,05mm, Werksnorm - Metav IndustryLine
Die exzellenten Bewertungen von Metav Werkzeuge stehen für viele loyale Kunden. Probiere es aus und shoppe auf metav-shop.de.! Das wichtigste auf einen Blick Messbereich: bis 300mm Ablesung: 0,05mm Material: rostfreier Stahl, Skala und Nonius mattverchromt leichte Ausführung MESSBEREICH} mm – von der Vorbereitung bis zur Freigabe Der Bereich 0 – 300mm schließt typische Kontrollpunkte im Arbeitsalltag ein. Messungen lassen sich zielgerichtet durchführen, ohne Umwege und ohne Zeitverlust. Im Maschinen- und Metallbau trägt das zu verlässlichen Entscheidungen in jeder Fertigungsstufe bei. Ergebnisse sind gut vergleichbar und schnell dokumentiert. So bleibt der Prozess stabil, auch bei wechselnden Losgrößen. Unsere Definition der EInteilung der Messbereiche. Klassifizierung Messbereiche beim Messschieber.. Immer die richtige Toleranz durch Fertigung nach weltweit gültigen Standards Verlassen Sie sich auf Präzision, die weltweit Standards setzt: Unser Metav IndustryLine Werkstatt-Messschieber erfüllt die Anforderungen der Werksnorm in jedem Detail – von der Materialauswahl über die Fertigung bis hin zur Kalibrierung. Damit garantieren wir exakte Messergebnisse, internationale Zertifikate und höchste Akzeptanz bei Audits und Kundenabnahmen. Qualität, der Sie vertrauen können. Fachhinweis: Wie stelle ich planparallelen Kontakt sicher? Messschenkel müssen vollständig anliegen; kippt der Schieber, entsteht ein systematischer Kippfehler. Bei Innenmessungen zusätzlich prüfen, ob beide Kreuzschnäbel anliegen. Sie sind unsicher, ob das Werkzeug zu Ihrer Anwendung passt?? Oder es fehlen Ihnen noch technische Daten?? Kein Problem, sprechen Sie uns an!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Informationen zur technischen Ausstattung zumWerkstatt-Messschieber von Metav IndustryLine: Bestellnummer: M201.372 Messbereich: 0-300mm Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber leichte Ausführung Ausführung: analog Gewicht: 0,7kg Material: rostfreier Stahl, Skala und Nonius mattverchromt Norm: Werksnorm Schnabellänge: 100mm Ablesung: 0,05mm Ablesung in Inch/Zoll: 1/128 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf es beim Messschieberkauf ankommt: Neben der Präzision und dem Messbereich sind zusätzliche Funktionen wie ein Datenausgang oder die Messkraftüberwachung entscheidend. Der Einsatz eines Messschiebers mit kontrollierter Messkraft ist besonders in der Qualitätssicherung und in Laborumgebungen vorteilhaft. Daneben ist wichtig zu prüfen, ob ein kalibrierter Messschieber benötigt wird. Man kann die Kalibrierung bei Lieferung vornehmen und aus Gründen der Prozesskontinuität alle 12 Monate erneuern.
300mm Workshop Caliper With Point 0.05mm Resolution Matt Chrome Scale, DIN 862 - Metav IndustryLine
Take advantage of the combination of robust stainless‑steel construction, a 0.05 mm analogue vernier and a 0–300 mm measuring range for reliable, repeatable shop‑floor checks. Order the instrument directly via Metav Werkzeuge or ask the consultants for application advice. Workshop caliper M201.395 — 300 mm analogue vernier, 0.05 mm resolution, Metav IndustryLine A Workshop caliper M201.395 designed for everyday machine‑ and metalworking measurement tasks, offering a durable stainless‑steel build and a clear matt‑chrome scale compliant with DIN 862 Analogue vernier with 0.05 mm resolution Measuring range 0–300 mm for workshop use Jaw length 100/40 mm for versatile gripping Stainless steel construction, matt chrome scale Reliable measurements for standard workshop work This caliper belongs to the standard measuring class (measuring range up to 300 mm) and is optimised for routine use in machine shops and metalworking environments. The analogue vernier provides a reading step of 0.05 mm, which corresponds to the common industrial accuracy for mechanical calipers under DIN 862; this means the instrument is suited to general production and inspection tasks where repeatable, traceable results are required. For operators less familiar with vernier scales, the reading method is straightforward: align the vernier marks against the main scale and read the combined value. The practical benefit is a maintenance‑free gauge that requires no batteries and gives dependable dimensional control across a broad range of components. Durable construction and practical jaw geometry for everyday handling Built from stainless steel with a matt‑chrome finish on the scale and vernier, the instrument resists corrosion and keeps graduations legible under workshop conditions. The specified 100/40 mm jaw geometry supports both broad external measurements and finer contact points for smaller features, improving contact stability and reducing measurement scatter. The caliper’s mass (about 0.8 kg) gives it a reassuring feel and helps stabilise readings during one‑handed use; users benefit from improved tactile control and fewer erroneous measurements due to flex. The solid construction also means less frequent replacement and lower long‑term tooling cost for routine shop inspection. Simple integration into workshop routines and clear operational advantages As an analogue instrument the caliper offers immediate readiness: no batteries, no electronic failure modes and straightforward operation for staff on the shop floor. Its 0–300 mm span covers the most common workshop needs—making it a practical single tool for many jobs where portable, accurate measurement is required. The mechanical vernier is easy to maintain and calibrate to workshop quality systems; compliance with DIN 862 supports documentation and quality audits. For procurement and workshop managers the consequence is predictable performance with minimal operational overhead and a tool that integrates smoothly into standard measuring procedures. For robust, no‑nonsense workshop measurement choose the Metav IndustryLine caliper — contact Metav Werkzeuge for product advice or to place an order via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M201.395 GTIN: 4054469102146 eClass: 21170344 Facts Measuring range: 0–300 mm Resolution / reading: 0.05 mm Weight: 0.8 kg Jaw length: 100/40 mm Tariff number: 90173000 Special features Material: stainless steel; scale and vernier matt chrome‑plated Norm: DIN 862 Analogue vernier (mechanical) Workshop type caliper, standard measuring class (0–300 mm) FAQ What accuracy can be expected from this caliper? The analogue vernier provides a reading step of 0.05 mm; under DIN 862 this corresponds to the industrial standard precision for mechanical calipers and is suitable for general workshop inspection. Is the caliper suitable for both internal and external measurements? Yes, the jaw geometry (100/40 mm) allows reliable external and internal contact measurements as well as step measurements typical in machine‑shop checks. Does the instrument require batteries or electronic maintenance? No; the mechanical vernier operates without batteries, eliminating electronic maintenance and ensuring immediate readiness on the shop floor. Can this caliper be used in quality documentation and audits? The caliper is manufactured to DIN 862, supporting integration into standard quality procedures and audit documentation for routine checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Workshop Caliper With Pointed Jaws 0.05mm Vernier, Fine Adjustment, Stainless Hardened Monoblock, Supplied In Case - Metav IndustryLine
Take advantage of the combination of a 300 mm measuring range, hardened stainless steel construction and a monoblock frame with fine-adjustment for consistent workshop results; supplied ready for daily use in a protective case. Order the Metav IndustryLine workshop caliper M201.331.2 directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine Workshop Caliper M201.331.2 — 300 mm, hardened stainless steel, analogue The Metav IndustryLine Workshop Caliper M201.331.2 is an analogue vernier caliper designed for robust workshop measurement tasks, offering fine adjustment and a rigid monoblock frame for repeatable readings across a broad range of metalworking applications. Hardened stainless steel construction Fine-adjustment thumb screw Monoblock frame for stability Supplied in protective case Built for reliable workshop measurement The caliper is engineered for the everyday demands of machine and metal workshops: a measuring range of 0–300 mm places it in the standard category where reach and stiffness are balanced for general assembly and part inspection. The body is manufactured from hardened stainless steel with a matt‑chrome scale, which improves legibility under workshop lighting and resists corrosion in humid or oily environments. The monoblock design reduces local flexing and increases longitudinal stiffness, so measurements remain consistent even during repetitive use. Supplied in a protective case, the instrument is ready for transport and safe storage between shifts. Vernier precision and fine adjustment for repeatable results This analogue caliper uses a dual vernier scale: 1/128" (upper) and 1/20 mm (lower), the latter corresponding to a vernier resolution of 0.05 mm, which matches industrial workshop standards for general dimensional control. The integrated fine‑adjustment thumb screw allows small, controlled movements of the slider for exact alignment on the workpiece, reducing overshoot and subsequent rework. Because the jaw length is 100 mm, the instrument complies with DIN 862 requirements applicable to jaw lengths up to 200 mm, supporting confident traceability of routine checks and incoming inspections. Practical handling that speeds daily workflows Ergonomics have been considered to keep handling straightforward: the matt finish on the scale reduces reflection, while the smooth slider action combined with the fine‑adjustment mechanism allows single‑handed positioning and measured closure on small features. The caliper’s pointed tips are useful for accessing grooves and narrow profiles where standard flat jaws struggle, while the robust construction tolerates typical shop-floor activity. Clear scale markings and tactile control contribute to faster measurement cycles and fewer alignment errors, supporting efficient production and quality assurance. For reliable workshop measurements choose the Metav IndustryLine Workshop Caliper M201.331.2 and contact Metav Werkzeuge GmbH in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for supply and expert advice Technical data Article number: M201.331.2 GTIN: 4054469101675 ECLASS: 21170344 Customs tariff number: 90173000 Core specifications Measuring range: 0–300 mm Minimum range: 0 mm Jaw length: 100 mm Vernier: 1/128" (upper) and 1/20 mm (lower) Materials & features Material: hardened stainless steel with matt‑chrome scale Monoblock frame Fine adjustment mechanism Pointed tips Analogue vernier caliper Supplied in protective case Conforms to DIN 862 (jaw length ≤ 200 mm) FAQ How precise is the Metav IndustryLine workshop caliper M201.331.2? The vernier arrangement yields a 0.05 mm resolution via the 1/20 mm scale; the combination of hardened construction and monoblock frame supports stable repeatability for standard workshop tolerances. Which types of measurement are possible with this caliper? The caliper performs external, internal and step measurements using its conventional jaw geometry and pointed tips, making it suitable for a broad set of routine workshop checks. Does the caliper conform to any norms for manual vernier calipers? With a jaw length of 100 mm, the instrument aligns with DIN 862 criteria applicable to that jaw length, which underpins its suitability for standard inspection tasks. Is the fine‑adjustment mechanism important for day‑to‑day use? Yes — the fine‑adjustment on the M201.331.2 enables controlled slider movement for exact seating on features, reducing measurement scatter and accelerating repetitive measurement cycles. What care is recommended to maintain accuracy? Regular cleaning of the sliding surfaces, avoidance of corrosive contaminants and gentle operation of the fine‑adjustment screw will preserve the matt‑chrome scale and the mechanical integrity of the caliper. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Workshop Caliper With Pointed Jaws Fine Adjustment Monoblock 0.05mm Vernier, Hardened Stainless Steel, Cased - Metav IndustryLine
Take advantage of a hardened stainless-steel construction, precise 0.05 mm vernier resolution and a fine‑adjustment screw for repeatable workshop measurements; the monoblock design increases stiffness for everyday use. Order the M201.331 workshop caliper directly via Metav Werkzeuge or ask our consultants if needed. M201.331 Workshop caliper — 300 mm, hardened stainless steel (Metav IndustryLine) A M201.331 workshop caliper engineered for standard metalwork and maintenance tasks, offering a 300 mm measuring range, fine adjustment and pointed jaws. 300 mm measuring range for workshop standards Hardened stainless-steel construction Fine-adjustment screw for exact positioning Supplied in protective case for transport Robust construction for dependable daily use Built as a standard-class measuring instrument for the workshop, this caliper combines a monoblock body with hardened stainless steel to resist wear and maintain alignment over time. The 300 mm range places the tool in the Standard category (measuring range up to 100–300 mm), which is widely used in machine shops because it balances reach with rigidity. The matt‑chromed scale reduces glare and aids clear reading on the analogue scale, while the robust single‑piece construction lowers the risk of play between beam and slider, so measurements remain reproducible across repeated cycles. Precise vernier reading and practical accuracy The analogue vernier layout provides a readable two‑scale arrangement (top vernier 1/128" and lower vernier 1/20 mm), delivering a practical resolution of 0.05 mm for routine quality control and workshop checks. This level of mechanical precision is suitable for general engineering tasks where DIN‑level repeatability is required; the jaw geometry and vernier spacing are designed to yield quick, verifiable readings without relying on electronics. For jaw lengths up to 200 mm this instrument adheres to DIN 862 conventions, ensuring compatibility with common inspection routines. Versatile jaws and controlled measurement force Equipped with pointed jaws, the caliper is suited to measuring narrow grooves, small bores and stepped features that standard flat jaws struggle to access. The integrated fine‑adjustment screw allows controlled slider movement for precise closing and setting, reducing overshoot and the influence of operator force. Together, these features make the instrument a practical choice for workshop technicians who need fast, accurate checks on components such as fixtures, shafts and assembly interfaces. Designed for handling, storage and longevity Practical details support daily use: the matt finish on the scale preserves legibility, the hardened alloy resists knocks and abrasion, and the instrument is supplied in a protective case to simplify transport and reduce the risk of damage in transit. Careful handling and occasional cleaning with a soft cloth and light oil will preserve the sliding fit and prolong service life. The overall design emphasises a low-maintenance workflow so the caliper can be integrated into routine inspection, setup and assembly procedures with minimal downtime. For robust, workshop‑grade measuring choose the Metav IndustryLine M201.331 workshop caliper and contact Metav Werkzeuge in Emmerich for ordering or application advice: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M201.331 GTIN: 4054469101651 Brand: Metav IndustryLine Category: Messschieber eClass: 21170344 Facts Measuring range: 0–300 mm Resolution (analogue): 0.05 mm Vernier: 1/128" (top) and 1/20 mm (bottom) Jaw length: 90 mm Special features Monoblock design Hardened stainless-steel body Matt‑chromed scale Fine‑adjustment screw Pointed jaws for narrow features Supplied in protective case for transport Conforms to DIN 862 for jaw lengths up to 200 mm FAQ What measurement accuracy can be expected from this caliper? The M201.331 workshop caliper provides an analogue resolution of 0.05 mm using its vernier arrangement; this is suitable for standard workshop and machine‑shop inspections where millimetre/sub‑millimetre precision is required. Can the caliper measure internal and external dimensions as well as steps? Yes; the instrument is designed for external, internal and step measurements thanks to its jaw geometry and pointed tips, making it versatile for common workshop tasks. Is the instrument suitable for regular workshop use on metal components? Yes; the hardened stainless‑steel construction and monoblock design make the caliper robust for routine metalwork checks, fixture setup and maintenance tasks. Does the product come with a case for transport and storage? The caliper is supplied in a protective case to facilitate safe transport and to reduce the risk of damage between uses. Does the caliper meet recognised standards? The M201.331 follows DIN 862 conventions for applicable jaw lengths (the instrument’s 90 mm jaw length falls within the DIN scope), aligning it with common inspection practices. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Workshop Caliper Without Probe Fine Adjustment 0.02mm Resolution Stainless Steel Matt Chrome Scale, Monoblock, Case - Metav IndustryLine
Take advantage of a durable hardened stainless steel beam, precise 0.02 mm vernier reading and a fine‑adjustment thumbwheel for reproducible workshop measurements; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. M201.313 Workshop Caliper — 300 mm hardened stainless steel, 0.02 mm resolution, fine adjustment The M201.313 Workshop Caliper is a 300 mm analogue vernier caliper designed for precise external, internal and step measurements in standard machine‑shop and metalworking tasks. 300 mm hardened stainless steel Fine‑adjustment thumbwheel Vernier reading to 0.02 mm Suitable for external, internal and step measures Precision that improves quality control This analogue vernier instrument delivers a 0.02 mm reading, placing it in the highest precision class for mechanical calipers and making it well suited for demanding workshop checks and dimensional control. The dual vernier concept provides clear graduations for reliable reading, while the solid scale finish reduces glare and reading errors. Combined with a robust measuring jaw geometry, the instrument supports consistent repeatability and helps reduce rework by catching deviations early in the production process. Built for daily workshop demands Constructed from hardened stainless steel with a matt‑chromed scale, the caliper uses a monoblock slide to resist flex and maintain alignment over frequent use. The 300 mm measuring range classifies the tool in the standard size bracket preferred in machine and metalworking environments, offering the best balance of reach and stiffness. A long jaw length of 100 mm improves access to deeper features, while the roughly 0.7 kg mass gives a reassuring feel that aids stable measurement handling during one‑handed operations. Smooth handling that speeds routine checks The integrated fine‑adjustment thumbwheel permits controlled approach and clamping, making repeat measurements quicker and less prone to overshoot. Designed for external, internal and step measurements, the caliper covers the typical four measurement modes used in workshop inspection sequences. Supplied to factory standard, the instrument is ready for regular use in production and maintenance settings; technical queries about fitment or suitability can be clarified with product specialists at Metav Werkzeuge for a seamless integration into existing quality processes. Contact Metav Werkzeuge to discuss how the Metav IndustryLine M201.313 with its 300 mm hardened stainless steel beam and fine‑adjustment thumbwheel can be supplied and specified for the workshop’s quality control requirements Technical Data Article number: M201.313 GTIN: 4054469101323 ECLASS: 21170344 Customs tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Measuring range: 0–300 mm Resolution: 0.02 mm Jaw length: 100 mm Weight: approx. 0.7 kg Type: analogue vernier Special features Material: hardened stainless steel with matt‑chromed scale Fine‑adjustment thumbwheel Monoblock slide design Measurement modes: external, internal, step Factory standard compliance FAQ What accuracy can be expected from this caliper? The M201.313 Workshop Caliper provides a vernier resolution of 0.02 mm, offering a high level of mechanical precision suitable for standard workshop and machine‑shop control tasks. Which measurement types does the instrument support? The caliper is designed for external, internal and step measurements, covering the typical inspection needs encountered in metalworking and assembly. Is the caliper suitable for everyday shop use? Yes. The hardened stainless steel construction and monoblock slide make the M201.313 robust for daily use in production and maintenance environments. Does the instrument include a fine‑adjustment control? Yes. The integrated fine‑adjustment thumbwheel enables controlled approach and secure clamping for repeatable measurements. What standards apply to delivery and documentation? The unit is supplied to factory standard; for specific calibration certificates or extended traceability, please consult Metav Werkzeuge regarding calibration options. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Workshop Caliper Without Probe Fine Adjustment 0.05mm Stainless Steel 90mm Jaws, Monoblock, DIN 862 - Metav IndustryLine
Combine hardened stainless‑steel construction, a 300 mm measuring range and micrometric fine adjustment for dependable workshop measurements; benefit from robust stiffness and clear graduations for routine quality control. Order the caliper directly via Metav Werkzeuge or consult the technical advisors for application guidance. M201.321 Workshop Caliper – 300 mm, Stainless, Fine Adjustment The M201.321 Workshop Caliper is an analogue 300 mm caliper designed for everyday engineering use, combining hardened stainless construction with a matt‑chromed scale and micrometric fine adjustment for repeatable readings. Hardened stainless steel construction 300 mm standard range for workshop use Micrometric fine adjustment for repeatable results Vernier: 1/128" upper, 1/20 mm lower Reliable measurements where they matter The caliper’s hardened stainless steel frame and monoblock design deliver high torsional stiffness, which reduces flexing during clamping and improves repeatability across many measurements. Compliance with DIN 862 for typical jaw lengths ensures that results can be referenced against common workshop standards; this translates into fewer rechecks, faster throughput and a measurable reduction in scrap from mis‑measured parts. The matt‑chromed scale reduces glare, making readings quicker under workshop lighting. Practical precision for daily quality control An analogue vernier scale with a readable graduation of 0.05 mm gives the instrument the industrial‑standard accuracy expected in machine shops. The dual vernier arrangement (1/128" upper, 1/20 mm lower) supports both metric and inch interpretation, while the integrated fine adjustment spindle lets operators make slow, controlled closure of the jaws for repeatable contact pressure. These features together simplify setting‑up and make the tool efficient for batch inspections and setup checks. Built for workshop endurance and usability Classified in the standard range (maximum measuring span 100–300 mm), this caliper strikes a balance between reach and handling: long enough for common components yet stiff enough for one‑handed operation. The matt‑chrome finish and hardened surfaces resist wear from regular use in industrial environments, reducing maintenance intervals and preserving scale legibility. The vernier mechanism and fine feed are straightforward to use, supporting quick handovers between operators without an extended learning curve. For practical advice on integrating the M201.321 into a shop workflow or to request application recommendations from Metav Werkzeuge, contact our specialists who will advise on measurement routines and compatibility with existing inspection processes. Technical Data Article number: M201.321 GTIN: 4054469101422 ECLASS: 21170344 Material: hardened stainless steel with matt‑chromed scale Type: analogue vernier caliper Monoblock construction Fine adjustment included Facts Measuring range: 0–300 mm Jaw length: 90 mm Graduation / resolution: 0.05 mm Vernier: 1/128" (upper) and 1/20 mm (lower) Norms: DIN 862 (jaw length up to 200 mm), factory standard above 250 mm Special features Hardened measuring surfaces Matt‑chromed scale for reduced glare Robust monoblock frame for stiffness Micrometric fine adjustment for precise contact Designed for standard workshop measurement tasks FAQ Is this caliper suitable for everyday workshop tasks? The M201.321 workshop caliper is designed for routine machine‑shop and metalworking measurements within the standard 0–300 mm range, offering robust construction and a readable vernier for reliable daily use. What resolution and reading accuracy can be expected? With a graduation of 0.05 mm and a vernier arrangement of 1/128" (upper) and 1/20 mm (lower), the instrument provides the industrial‑standard mechanical resolution commonly used for workshop quality control. Does the caliper meet recognised standards? The M201.321 is specified to conform to DIN 862 for typical jaw lengths, ensuring compatibility with common metrology practice in production environments. How does the fine adjustment help in measurement tasks? The integrated fine adjustment allows slow, controlled movement of the jaw, reducing operator‑induced variation and improving repeatability when setting measurement contacts. Which materials and environments is this caliper intended for? Constructed from hardened stainless steel with a matt‑chromed scale, the caliper is built to withstand typical workshop conditions and regular handling while keeping the scale legible. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300x6 Measuring Bridge Adjustable And Slideable - Filetta
Take advantage of a compact, low‑profile attachment that adds a precise measuring surface and flexible positioning to special calipers; the combination of a 15 mm height, measuring faces 300 x 6 mm and an attachable, movable design streamlines inspection tasks in confined or awkward geometries. Order via Metav Werkzeuge or consult their specialists for application advice. Measuring bridge – attachable, movable accessory for special calipers by Filetta The measuring bridge is an attachable and movable accessory designed to extend the measuring capabilities of specialty calipers for workshop inspection, fixture setup and quality checks. Attachable and movable design Measuring faces 300 x 6 mm Compact 15 mm height profile Extend reach and capability without new instruments A compact measuring bridge adds a stable, repeatable contact surface to existing special calipers, allowing the measurement of recessed or wider features without changing the baseline instrument. The measuring faces (300 x 6 mm) provide a long, narrow contact suited to slot and step measurements, while the low 15 mm height keeps the assembly slim and easy to position. This extension reduces the need for multiple instruments and speeds up inspection workflows by enabling more measurements to be taken with a single calibrated tool. Precision where space is limited Engineered for practical precision, the accessory transfers the caliper’s reference plane to areas that are otherwise hard to access. A slim profile and narrow faces help to minimise tilt and measurement error when working in confined spaces; the design prioritises stiffness over length to preserve reproducibility. The result is consistent dimensional data that supports precise set‑ups and reliable quality control, making the bridge a pragmatic choice for machine shops and tooling departments that require accurate results without complex fixtures. Simple handling and workshop integration The bridge is designed for easy mounting and fine repositioning on the host caliper, so adjustments can be made quickly during iterative checks or tool set‑up. Its movable configuration supports flexible measuring scenarios, from step and depth checks to distance transfers between features. As an accessory compatible with special calipers, it widens the practical use of existing measuring equipment and keeps the test procedure straightforward — a time‑saving asset for routine inspection cycles. For application guidance or to order the Filetta measuring bridge, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 — specialists will advise on fit and delivery Technical data Article number: MS910.499 Manufacturer: Filetta Facts Height: 15 mm Measuring faces: 300 x 6 mm Special features Attachable to special calipers Movable/adjustable positioning Slim, low‑profile contact surface FAQ What is the primary use of this measuring bridge? The measuring bridge is intended as an attachable accessory for specialty calipers to measure recessed features, steps and long narrow surfaces where direct caliper jaws cannot reach. Is the bridge compatible with standard calipers or only special models? Compatibility depends on the caliper geometry; the bridge is designed for use with special calipers and similar workshop measuring tools and may require a matching mounting interface. Does the measuring bridge change the measurement reference of the caliper? Yes, when fitted the bridge establishes a new contact plane via its faces (300 x 6 mm) so measurements reflect the transferred reference; users should account for any offset in documentation. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
3020mm Digital Precision Caliper With Colour 2.4" Display, Wireless USB, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a truly long‑range measuring solution with clear data transfer and laboratory traceability: an extra‑long digital caliper offering a measuring span up to 3,020 mm, wireless + USB output and an ISO 17025 calibration certificate—order via Metav Werkzeuge or consult our specialists for process integration. Digital caliper — extra‑long range, Wireless + USB, ISO 17025 calibrated (Microtech Metrology) The Digital caliper is an extra‑long measuring instrument designed for large components and bore‑spacing tasks in production, tooling and fixture making. Extra-long measuring range to 3,020 mm Wireless and USB data output for traceability Delivered with ISO 17025 calibration certificate IP54 protection and 2.4" colour display Precision for large-format measurements with low uncertainty This instrument is tailored for applications that require measurements beyond typical workshop lengths: with a maximum measuring range of 3,020 mm it is classified as an extra‑long caliper, bridging the gap between conventional gauges and specialised length systems. The device combines a standard resolution of 0.01 mm with a nominal repeatability figure of 0.07 mm, making it suitable for coarse alignment, large assembly checks and incoming inspection of oversized parts where reproducibility across the full stroke is essential. The included measuring cones Ø20 mm and Ø35 mm simplify bore‑spacing tasks and adapt the instrument to both internal and external measurement situations. Reliable data transfer and documented traceability for production control Data handling is built for modern quality workflows: the caliper supports Wireless transmission plus USB export, enabling direct logging into SPC systems, SPC terminals or inspection software without manual transcription. Delivered fully calibrated to ISO 17025, the instrument arrives with a traceable calibration certificate that documents measurement uncertainty and ensures compliance with laboratory or supplier quality requirements. Together, wireless connectivity and a certified calibration reduce administrative effort and support a documented audit trail in serial production or supplier evaluation. Robust assembly and practical handling for everyday workshop use Designed for industrial conditions, the caliper carries an IP54 rating that shields the electronics from dust ingress and splashes, while the 2.4" colour display provides clear readout in variable light. The instrument accepts a controlled measuring force between 1–20 N, which helps to reduce user‑dependent variation when combined with consistent handling routines. The housing and slider have been engineered for repetitive use on shop floors; this practical construction supports faster checks, fewer re‑measurements and a smoother flow through setup and inspection operations. Contact Metav Werkzeuge for a technical consultation on integration and to request the Microtech Metrology digital caliper (SKU 141733017) complete with ISO 17025 certificate—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 141733017 GTIN: 4061905452437 Manufacturer: Microtech Metrology Facts Measuring range: 20–3,020 mm Resolution: 0.01 mm Nominal accuracy: 0.07 mm Measuring force: 1–20 N Display: 2.4" colour Protection class: IP54 Special features Digital instrument with Wireless + USB data output Delivered calibrated to ISO 17025 with certificate Includes measuring cones Ø20 mm and Ø35 mm Suitable for large bore‑spacing and long‑part inspection Category: digital caliper (extra‑long range) FAQ Which measuring range does the instrument cover? The Microtech Metrology digital caliper (SKU 141733017) covers a measuring span from 20 mm up to 3,020 mm, classifying it as an extra‑long caliper suitable for large components. Is the caliper supplied with a calibration certificate? Yes — the device is delivered fully calibrated to ISO 17025 and includes the calibration certificate for traceability and quality documentation. How are measurement results exported to a PC or SPC system? Measurement data can be transferred via the built‑in Wireless interface or through the USB connection for direct logging into inspection or SPC software. What environmental protection does the instrument offer? The caliper is rated IP54, providing protection against dust ingress and water splashes typical of workshop environments. Are measuring accessories included for bore measurements? The delivery includes measuring cones Ø20 mm and Ø35 mm, enabling reliable bore‑spacing checks and internal measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
3020mm Digital Precision Caliper With Wireless Output, Swiss Digit Display 11mm, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of wireless data transfer, robust IP67 protection and an extra‑long 3,020 mm measuring range for reproducible large‑format inspections; the instrument is supplied with an ISO 17025 calibration certificate for traceable results. Order the caliper directly via Metav Werkzeuge or ask the Metav consultants for integration advice. Digital Caliper – wireless long‑range measuring instrument by Microtech Metrology The Digital Caliper is a long‑range precision measuring instrument designed for shop‑floor and fixture applications where reproducible measurements of large components are required Wireless data transfer ISO 17025 calibrated with certificate Measuring range up to 3,020 mm IP67 protection for workshop conditions Long‑range capability for large components This caliper covers a measuring span from 20 mm to 3,020 mm, categorising it in the extra‑long class suited to big parts such as large housings, pipes and segmented assemblies. The extended range reduces the need for multiple tools and enables fewer setups for measurements that would otherwise require transfer gauges or tape systems. Supplied measuring cones Ø20 mm and Ø35 mm allow reliable bore and spacing checks across extended lengths, giving stable contact geometry and consistent referencing for repetitive inspection tasks. Traceable, shop‑ready data handling Engineered for quality assurance workflows, the instrument features wireless data output and a clear Swiss Digit display (11 mm height), facilitating direct integration into measurement logs and inspection software. The caliper is delivered fully calibrated to ISO 17025 and includes a calibration certificate, which supports audit trails and reduces time spent on incoming inspection setup. With an indicated accuracy of ±0.07 mm and a display resolution of 0.01 mm, the device balances long reach with reliable numeric repeatability suitable for workshop and production control. Designed for harsh environments and practical use Built to withstand daily use, the instrument carries an IP67 rating for dust and water resistance, making it robust on the shop floor and in harsher production environments. The combination of a high‑visibility display, wireless data transfer and rugged sealing shortens inspection cycles and reduces handling errors. The overall design supports efficient measurement of large assemblies while preserving measurement integrity over long spans, contributing to faster throughput and fewer reworks. For traceable, long‑range measuring tasks contact Metav Werkzeuge to discuss the Microtech Metrology Digital Caliper with ISO 17025 calibration and wireless output — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 141733014 GTIN: 4061905452321 Manufacturer: Microtech Metrology Core specifications Measuring range: 20–3,020 mm Resolution (display): 0.01 mm Indicated accuracy: ±0.07 mm Display: Swiss Digit, height 11 mm Protection class: IP67 Materials and features Digital caliper, wireless data output ISO 17025 calibration certificate included Supplied accessories: measuring cones Ø20 mm and Ø35 mm Suitable for large‑format workshop metrology FAQ Is the caliper supplied calibrated and traceable? Yes. The Digital Caliper from Microtech Metrology is delivered fully calibrated to ISO 17025 and includes the calibration certificate. What length can be measured with this instrument? The instrument measures from 20 mm up to a maximum of 3,020 mm, placing it in the extra‑long category for large component measurement. How is measurement data exported? Measurement data is transferred via the wireless data output, enabling direct logging into inspection software or data collection systems. Is the caliper suitable for harsh workshop environments? The caliper is rated IP67, providing dust and water resistance suitable for demanding workshop conditions. Which accessories are included for specialised measurements? The delivery includes measuring cones with diameters Ø20 mm and Ø35 mm for bore and spacing applications. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
30mm Precision Gauge Block Set With 41.3mm And 131.4mm Blocks, 4mm & 25mm Setting Rings, DIN EN ISO 3650/1 Wooden Case - Metav IndustryLine
Take advantage of Grade 1 accuracy, factory calibration certificates and a hardened special steel construction for reliable caliper verification; order directly via Metav Werkzeuge or consult the team's experts for application advice. Kalibriersatz für Messschieber, 5-tlg. – Parallel end-gauge set (Grade 1) »Metav IndustryLine« Kalibriersatz für Messschieber provides a compact verification solution for workshop and inspection use as a parallel gauge set for calipers and similar measuring tools. Grade 1 accuracy to DIN EN ISO 3650 Includes factory calibration certificates Hardened special steel construction Supplied in a wooden transport case Ensure measurement certainty with Grade 1 verification The parallel end-gauge set is designed to give a clear, certifiable reference for caliper checks and adjustments. Built to Grade 1 and tested according to DIN EN ISO 3650/1, the set provides a documented basis for verifying measuring jaws and overall caliper linearity. The included calibration certificates allow traceability in the inspection chain and support quality documentation. As a consequence, calibration intervals can be planned with confidence and measuring uncertainty reduced during routine checks. Practical content for workshop verification and setting tasks This kit contains precise parallel gauges in the most useful sizes for caliper inspection: 30 mm, 41.3 mm and 131.4 mm, plus two setting rings (4 mm and 25 mm) for quick function checks and zero-verification. The combination of these elements covers common reference points used in metalworking and maintenance workflows, enabling both inner and outer jaw cross-checks as well as step measurements. The compact design of the set keeps handling efficient while maintaining the stiffness required for repeatable readings. Durable construction and ready-to-use calibration documentation Manufactured from special steel, which is aged and hardened, the components resist wear over repeated use and preserve surface flatness—an important factor for repeatable contact between gauge faces and caliper jaws. Each end gauge and setting ring is supplied with a factory calibration certificate (AQRAT) that confirms conformity with VDI/VDE/DGQ 2618 inspection procedures. The set is supplied in a wooden case for secure transport and protected storage, making it suitable for both the workshop bench and the inspection room. Contact Metav Werkzeuge to arrange delivery of this Grade 1 calibration set or to discuss which verification solution best fits the measurement routine in the workshop Technical data Article number: MK.318.204.N Label: 5-teiligen Kalibriersatz für Messschieber inkl. Werkskalibierschein (AQRAT) Category: End gauges Weight: 1 kg Pieces per set: 5 Tariff number: 90173000 Quality: Grade 1 Parallel end-gauge set for calipers up to 200 mm Contents: end gauges 30 mm, 41.3 mm, 131.4 mm Includes setting rings 4 mm and 25 mm Material: special steel, aged and hardened Standards: DIN EN ISO 3650 and VDI/VDE/DGQ 2618 All items supplied with factory calibration certificates Supplied in a wooden transport case FAQ What is included in the calibration set? The calibration set includes three parallel end gauges (30 mm, 41.3 mm, 131.4 mm) and two setting rings (4 mm and 25 mm), all delivered with factory calibration certificates. Is the set suitable for routine caliper checks in a machine shop? Yes, the parallel gauge set is designed for verification of calipers up to 200 mm and covers the common reference lengths used in general machine‑shop and metalworking checks. Are the gauges supplied with calibration documentation? All end gauges and setting rings in this kit are supplied with factory calibration certificates (AQRAT) confirming conformity to the stated standards. Which standards govern the set's accuracy? Accuracy and production follow DIN EN ISO 3650/1 and the inspection procedure VDI/VDE/DGQ 2618, ensuring Grade 1 conformity. What material are the gauges made from and why does that matter? The gauges are made from special steel, aged and hardened to resist wear and to retain flatness for repeatable contact with caliper jaws. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
30° Thread Measurement Adapter for Thread Gauge, Pitch 5mm - Microtech Metrology
Benefit from the combination of a 30° profile for thread flanks, compatibility with standard precision calipers and a compact, robust design that speeds up inspection routines; order the measuring attachment directly via Metav Werkzeuge or ask our consultants if needed. Measuring Attachment (TR 30°) for Thread Measurement by Microtech Metrology The measuring attachment (TR 30°) is a precision accessory for reliable thread inspection and pitch verification in workshop and quality‑control environments. 30° profile for precise thread measurement Designed for 5 mm thread pitch checks Mountable on standard precision calipers Suitable as metrology accessory for workshops Fast, repeatable thread checks for production The 30° flank geometry is tailored for standard thread‑profile verification and facilitates fast comparison of manufactured threads against nominal contours. By using the measuring attachment to engage the flank geometry, operators achieve consistent contact conditions that reduce variability in manual checks. This accessory is particularly effective when combined with precision calipers, turning routine thread inspection into a quick, repeatable step in a production or inspection loop while maintaining traceable outcomes. Built for precision and simple integration Constructed as a compact, robust metrology accessory, the unit allows straightforward mounting and alignment on common measuring fixtures and caliper jaws. The defined 5 mm pitch compatibility ensures the profile matches typical metric thread checks and simplifies setup. Thanks to its solid geometry and secure mounting, the attachment minimises elastic deformation during measurement, supporting reliable readings and fewer re‑checks; this enhances throughput and reduces non‑productive time in the workshop. Practical benefits for workshop and quality control Adopting this accessory improves process reliability by delivering standardised contact geometry for thread assessment, which aids clear pass/fail decisions during quality control. The design supports integration into daily inspection routines without requiring extensive retraining, making it a pragmatic choice for maintenance shops and production lines alike. As a metrology accessory, it complements existing measuring equipment and contributes to a leaner, more transparent inspection workflow. Contact Metav Werkzeuge today for expert advice and to secure the Microtech measuring attachment for enhanced thread inspection on the shop floor Technical Data Article number: 141377305T GTIN: 4061905458552 Brand: Microtech Metrology Product: Measuring attachment (TR 30°) Facts Angle: 30° Thread pitch: 5 mm SKU: 141377305T Special features Accessory for thread measurement Mountable on precision calipers and measuring fixtures Single accessory, not supplied as a set Intended as metrology workshop equipment FAQ What threads is the attachment suitable for? The measuring attachment (TR 30°) by Microtech Metrology is designed for standard metric threads and, with its 5 mm pitch geometry, is suited to common production checks where a 30° flank profile is required. Can the accessory be used with any caliper? Compatibility is intended for standard precision calipers and measuring fixtures; the attachment mounts to typical jaw geometries to provide the defined contact for thread verification. Does the device provide direct numerical output? The accessory is a mechanical measuring aid; it provides a defined profile and mounting for comparative and manual measurements rather than electronic data output. How does the attachment improve measurement consistency? By offering a standardised 30° contact profile and secure mounting, the accessory reduces variability from manual probing, improving repeatability and speeding up routine inspections. Is the item supplied as a set or single component? The product is supplied as a single accessory (not as a set) and is intended to complement existing calipers and metrology equipment for thread checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
30° Thread Measurement Adapter For Thread Profile Inspection - Microtech Metrology
Take advantage of the precise 30° flank geometry and dedicated 7 mm pitch specification to standardise thread inspections on the shop floor; this measuring attachment reduces geometry-related measurement scatter and supports faster decision-making in quality control. Order via Metav Werkzeuge or request advice from our consultants for optimal integration. Measuring attachment — Thread inspection accessory (30° flank angle, 7 mm pitch) by Microtech Metrology A measuring attachment engineered for thread inspection, providing a defined 30° flank angle and intended for use with metrology instruments and bench inspection setups. Thread measurement attachment 30° flank angle Suited for 7 mm thread pitch Compact accessory for inspection benches Compatible with Microtech measuring systems Achieve consistent thread geometry and repeatable readings The attachment supplies a fixed 30° flank geometry that turns variable contact conditions into a consistent measurement reference. By defining the flank angle mechanically, the accessory reduces operator-dependent variance and improves repeatability for routine inspections. This stability is particularly valuable in process control where identical contact geometry shortens the statistical spread of multiple readings and simplifies trend analysis. Integrate standard pitches into existing inspection workflows Specified for a 7 mm thread pitch, the accessory is tailored to common metric applications where a dedicated measurement geometry accelerates set-up and reduces interpretation effort. Its role as a fitting for measuring instruments means quick alignment with existing fixtures and gauging jigs, supporting a compact footprint on the inspection bench. The clear pitch specification simplifies documentation and inspection plans, enabling faster acceptance testing and fewer ambiguous measurements. Strengthen quality control and production reliability Used as part of a structured inspection routine, this thread inspection accessory contributes directly to reduced rework and improved first-pass yield. Fixed geometry inspections streamline operator training and allow quality engineers to focus on statistical evaluation rather than compensating for inconsistent probe angles. For procurement and traceability, the accessory is supplied by Microtech Metrology and can be referenced by its SKU for procurement and inventory purposes. For precision thread inspection with a defined 30° flank geometry, choose the Microtech Metrology measuring attachment and contact Metav Werkzeuge in Emmerich for ordering and technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 141377307T GTIN: 4061905458576 Manufacturer: Microtech Metrology Numbers / Core technical data Flank angle: 30° Thread pitch: 7 mm Special features / Applications Application: Thread measurement Category: Accessories Intended use: Inspection and metrology instruments FAQ What is the primary function of this accessory? The measuring attachment is intended for thread measurement, providing a defined contact geometry for reliable inspection and quality control (Microtech Metrology, SKU 141377307T). Which flank angle does the attachment use? The accessory uses a 30° flank angle for consistent thread flank contact during inspection. For which thread pitch is this accessory specified? The component is specified for a 7 mm thread pitch and is optimised for inspections that use that standard pitch. Can this accessory be used with different metrology setups? The thread inspection accessory is designed as an add-on for metrology instruments and bench inspection equipment and is compatible with Microtech measuring systems. Is calibration or a calibration certificate included with the product? Calibration details are not specified in the product data; any calibration or traceability documentation should be confirmed at the time of order. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
30° Thread Measurement Attachment For Thread Form TR 30° - Microtech Metrology
Benefit from a compact, purpose-built accessory that secures defined contact geometry and compatibility with an 8 mm thread pitch for reliable inspection results; order directly via Metav Werkzeuge or consult our specialists for application advice. Messaufsatz TR 30° — measuring attachment for thread inspection (Microtech Metrology) The Messaufsatz TR 30° is a precision measuring attachment intended for thread profile inspection, characterised by a defined 30° contact angle and suitability for an 8 mm pitch; ideal as an accessory in metrology setups. 30° contact angle for thread profile control Compatible with 8 mm thread pitch Accessory for metrology instruments Compact design for repeatable readings Consistent inspections through defined contact geometry A defined contact geometry reduces variation between measurements and simplifies interpretation of results. The combination of a precisely set 30° contact angle and dedicated geometry ensures repeatable readings when assessing thread profiles, while the clear specification of 8 mm pitch removes ambiguity in setup. In practice, this leads to faster decision-making in quality control, because measurements are directly comparable and less prone to operator-dependent spread. The attachment functions as a stable interface between the workpiece and the measuring instrument, supporting traceable inspection routines. Efficient integration into metrology workflows As an accessory for existing inspection equipment, the unit is designed to sit within established measurement processes, reducing setup time and keeping throughput high. Its compact form factor makes it straightforward to incorporate into bench workflows and measuring jigs, delivering precision without adding unnecessary bulk. By standardising the contact angle and pitch reference, the accessory helps maintain inspection consistency across shifts and machines, supporting lean production principles and better utilisation of inspection resources. Practical advantage for production and quality assurance Adopting a dedicated thread inspection attachment streamlines sampling plans and enhances first‑off and in‑process checks. The defined contact geometry minimises rework caused by inconsistent gauging and supports clear pass/fail criteria in production environments. Beyond immediate measurement benefits, this approach contributes to faster root‑cause analysis when deviations occur, because measurement geometry is a known constant rather than a variable. The result is improved process reliability and increased confidence in measurement data during routine quality assurance. For precise thread inspection with Microtech Metrology quality, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply: info@metav-werkzeuge.com – +49 2822 7131930 Technical Data Article number: 141377308T GTIN: 4061905458583 Manufacturer: Microtech Metrology Numbers / Core Technical Data Angle: 30° Pitch: 8 mm Special features / Versions Category: Zubehör (accessory) Designation: Messaufsatz Intended use: Thread measurement FAQ What is the Messaufsatz TR 30° intended for? The Messaufsatz TR 30° is a measuring attachment designed for the inspection of threaded profiles, providing a defined contact geometry to support consistent measurement results. Which thread pitch does this attachment support? This attachment is specified for an 8 mm pitch, ensuring alignment with threads of that nominal pitch. What contact angle does the accessory use? The accessory employs a 30° contact angle, which standardises the contact geometry for thread profile checks. Can the attachment be integrated into existing measuring setups? The attachment is intended as an accessory for metrology instruments and is suitable for integration into bench inspection routines and fixture‑based workflows, subject to the mounting and alignment of the respective instrument. Does the product include a calibration certificate? The product data does not specify a calibration certificate; calibration status should be confirmed via the product labelling or detailed technical documentation. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
30° Thread Measurement Attachment For Tr 30° Threading - Microtech Metrology
Take advantage of a compact, purpose-built accessory: the combination of a 30° measurement angle and a defined pitch 20 specification ensures repeatable thread inspection and faster setup times in inspection routines. Order the measuring attachment directly via Metav Werkzeuge or consult Metav’s experts for compatibility advice. Measuring attachment — 30° thread measurement accessory by Microtech Metrology Measuring attachment for targeted thread inspection with a 30° measuring geometry, suitable as an accessory to precision measuring instruments 30° measurement geometry for threads Designed for thread inspection, pitch 20 Compact, workshop-ready accessory Manufactured by Microtech Metrology Measure threads precisely where profile matters The 30° measurement angle provides a defined contact geometry that simplifies repeatable thread inspection of specialised profiles. As an inspection accessory, this device reduces interpretation error by keeping the contact interface constant; that leads to fewer re-measurements and a more efficient quality workflow. The attachment is specified with a pitch of 20, which clarifies the nominal thread interval it is intended to assess. This focus on a single, well-defined function creates a reliable tool for routine checks in a production environment. Easy integration into existing metrology setups Designed as a compact accessory, the attachment is intended for simple integration with compatible measuring heads and fixtures. Its small footprint keeps fixturing straightforward and avoids clashing with adjacent gauges, so inspection cycles remain short and ergonomically manageable. The result is improved throughput without requiring major alterations to established measuring stations. Where rapid, repeatable checks are required, the accessory streamlines the inspection task and reduces non-productive time. Engineered consistency for workshop and lab use Manufactured by Microtech Metrology, the component reflects a focus on industrial metrology standards and robustness suitable for daily use. As an accessory in a calibrated measuring chain, it supports consistent decision-making in quality control and production acceptance. Combining this engineered consistency with Metav’s distribution and product knowledge makes the component a pragmatic choice for workshops seeking precise, dependable thread assessment tools. Contact Metav Werkzeuge for tailored compatibility checks or to add the Microtech Metrology measuring attachment to an existing inspection kit — Metav’s specialists in Emmerich advise on integration and supply. Technical data Article number: 141377320T GTIN: 4061905458668 Manufacturer: Microtech Metrology Facts Angle: 30° Pitch: 20 SKU: 141377320T Special features Accessory for thread measurement Category: accessory for measuring instruments Compact design for easy fixturing FAQ What is the primary function of this accessory? This measuring attachment by Microtech Metrology is designed for thread inspection using a 30° measurement geometry to provide consistent contact during checks. Which thread pitch is this accessory intended for? The accessory is specified with a pitch of 20, making it suitable for inspections where that nominal thread interval is required. Can this attachment be used with different measuring systems? The accessory is intended to be mounted on compatible measuring heads and fixtures; Metav Werkzeuge can advise on specific system compatibility for the Microtech Metrology accessory (SKU 141377320T). Does the product include a traceable identifier? Yes, the component carries the GTIN 4061905458668 and the article number 141377320T for clear identification in procurement and inventory. Is the accessory suitable for workshop daily use? The design and manufacturing quality from Microtech Metrology make the accessory robust enough for regular workshop inspection routines and production-quality control tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
30° Thread Measurement Attachment For Trapezoidal Threads - Microtech Metrology
Take advantage of the precise 30° geometry and compatibility with standard thread pitches to improve repeatability in inspection routines. The combination of reliable manufacturing, clear technical data and simple integration keeps throughput steady and measurement variance low — order the accessory via Metav Werkzeuge or consult our specialists for application advice. Measuring Attachment TR 30° — Thread Measurement Accessory by Microtech Metrology The Measuring Attachment TR 30° is a compact accessory designed for precise assessment of 30° thread profiles, intended for integration with comparators and other measuring instruments in workshop and laboratory environments. 30° measuring angle for standard thread profiles Compatible with 9 pitch thread applications Compact design for easy mounting on comparators Precision accessory from Microtech Metrology Faster, more reliable thread checks with defined 30° geometry The attachment provides a defined 30° contact geometry that streamlines thread measurement by establishing a repeatable reference form for profile inspection. By using a dedicated measuring head rather than improvised probes, metrology routines become more consistent and less dependent on operator technique, which reduces variability in pass/fail decisions. This accessory is particularly useful where rapid verification of thread lead and flank form is required, bringing faster throughput to routine quality checks while retaining a clear technical basis for each measurement. Seamless integration with comparators and inspection rigs Designed as an accessory for measuring setups, the head is sized to mount easily on standard comparator fixtures and similar instruments. The compact construction keeps the centre of gravity close to the mount, improving handling and minimising induced error during alignment. Integration reduces set-up time compared with bespoke fixtures and supports a repeatable inspection workflow, which in turn helps production lines maintain consistent quality levels without complex retooling. Consistent results and traceable workflows for quality assurance The accessory supports threads with a pitch value of 9, offering a targeted solution for specific pitch ranges where defined flank geometry matters. As a precision-made product from Microtech Metrology, the head contributes to repeatable inspection steps that are suitable for routine QA tasks and component acceptance testing. Combined with Metav’s ethos of accessible precision and reliable supply, the component helps smaller workshops and larger industrial users alike to implement standardised measurement processes that underpin traceable quality documentation. For tailored technical advice or to request delivery of the Microtech Metrology measuring attachment TR 30°, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 141377309T GTIN: 4061905458590 Brand: Microtech Metrology Product: Measuring attachment (thread measurement) Category: Accessory for measuring instruments Facts Angle: 30° Pitch: 9 SKU: 141377309T Special features Designed for thread profile inspection Compact mounting form for comparators Intended for workshop and laboratory inspection workflows FAQ What thread form is this attachment intended for? The attachment is intended for 30° thread profiles and provides a defined contact geometry for reliable flank inspection. Can the head be used with standard comparators? Yes, the accessory is designed for straightforward mounting on standard comparator fixtures and similar measuring rigs. Which pitch values does the accessory support? The component is specified with a pitch value of 9 and is optimised for applications where that pitch is relevant. Is this a standalone instrument or an accessory? This is an accessory intended to augment existing comparators and measuring instruments for improved thread measurement. How is quality and origin documented for this product? Manufactured by Microtech Metrology, the accessory is produced to the brand’s manufacturing standards and supplied with the product documentation relevant to the instrument. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
30° Thread Measurement Attachment TR For Thread Gauging - Microtech Metrology
Take advantage of precise 30° thread profiling combined with a clear reference to pitch 16 for reliable inspection results; order the measuring attachment directly via Metav Werkzeuge or consult our specialists for application advice Messaufsatz — 30° measuring attachment for thread inspection (Microtech Metrology) The Messaufsatz is a compact measuring attachment with a 30° profile angle, developed for accurate thread inspection and pitch verification in precision metrology environments 30° thread-profile measuring tip Suitable for thread pitch 16 applications Accessory for precision metrology instruments Repeatable thread inspection with a defined profile angle A dedicated measuring attachment with a 30° profile ensures that thread flanks are inspected against a consistent reference, which reduces variability between measurements. By using a fixed profile angle the accessory converts geometric fit into a reproducible datum, supporting faster quality decisions and fewer rejects. The construction emphasises stable contact geometry so that comparison of serial parts becomes straightforward; this improves throughput in incoming inspection and in-process checks while retaining the required precision. Integration into metrology workflows for efficient sampling Designed as an accessory for measurement set-ups, the attachment supports efficient sampling workflows in production and lab environments. When combined with a calibrated measuring instrument, the accessory enables focused checks of flank geometry and pitch, helping to shorten inspection cycles and increase capacity. Traceable identifiers such as the product SKU and GTIN simplify inventory control and documentation; the clear labelling supports audit processes and ensures components are recorded correctly in quality management systems. Practical handling, traceability and procurement benefits The compact form factor makes handling and fixture integration uncomplicated while maintaining the contact geometry needed for reliable readings. The accessory is supplied as a defined article suitable for standard metrology stations, which aids fast procurement and avoids custom adaptations. Metav’s distribution and quality filter in Emmerich guarantee consistent availability, backed by a broad product range and long-standing customer trust; this gives purchasing teams confidence that a dependable metrology accessory is being specified for repeatable inspection tasks. Ensure reliable thread inspection with the Microtech Metrology measuring attachment — contact Metav Werkzeuge for specification matching and procurement at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 141377316T GTIN: 4061905458651 Name: Messaufsatz Manufacturer: Microtech Metrology Facts Angle: 30° Thread pitch: 16 Category: Measuring instruments / Accessory Special features Intended for thread measurement Accessory for precision metrology set-ups Asset files available: 141377110T-detail.png, 141377110T-main.png FAQ How does the attachment inspect thread profiles? The attachment measures the flank geometry using a fixed 30° profile; the Messaufsatz (Microtech Metrology measuring attachment, SKU 141377316T) provides a repeatable contact geometry for profile verification and pitch checks Which thread pitch is the accessory intended for? The accessory is specified for thread pitch 16 as a reference value and is primarily used for comparative checks of parts featuring that pitch Is this a standalone instrument or an accessory for existing metrology equipment? This item is an accessory for precision metrology set-ups; the Microtech Metrology Messaufsatz integrates with measuring instruments to extend thread inspection capabilities How is the product identified for procurement and traceability? Identification is provided via the SKU 141377316T and GTIN 4061905458651, which support ordering, inventory management and audit documentation Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
30° Thread Measuring Attachment For Tap Radius Measurement - Microtech Metrology
Combine precise contact geometry, clear pitch reference and robust design for repeatable thread inspection. Benefit from improved process reliability and tool compatibility; order the measuring attachment directly via Metav Werkzeuge or consult our specialists for application advice. Measuring attachment — Thread inspection accessory with 30° V-angle and 10 mm pitch (Microtech Metrology) The measuring attachment is a compact thread-measuring accessory with a 30° V-angle, intended for accurate verification of metric threads and simple integration into existing metrology setups. 30° V-angle for accurate thread contact Designed for 10 mm thread pitch inspection Compatible with precision metrology instruments Achieve repeatable thread readings with defined contact geometry The attachment delivers a 30° V-angle that standardises the contact geometry used during thread checks, reducing variability from informal probing. By providing a fixed seating angle, the device converts subjective feel into quantifiable contact points so that thread measurement can be reproduced across shifts and operators. The defined geometry is particularly helpful when verifying profiles with a 10 mm pitch, where consistent seating avoids false rejects and speeds up quality decisions. Integrates with existing inspection workflows to save time As an accessory that mounts to common inspection fixtures, this component supports fast changeovers and short cycle times. Its compact footprint and clear reference face mean measuring stations require minimal rework; the result is a more efficient metrology bench and fewer measurement interruptions. The attachment is prepared for direct use in workshop and laboratory environments, contributing to an overall increase in process efficiency without extensive retraining. Designed for dependable use in industrial metrology environments Constructed to meet the demands of routine inspection, the accessory combines robust materials and precise machining to maintain alignment during handling. The consistent geometry and solid coupling minimise measurement scatter, supporting laboratory‑grade repeatability in a production setting. For suppliers and workshops aiming to raise first‑pass yield, this accessory provides a simple mechanical upgrade that improves traceability and reduces rework. Clear technical parameters that support decision-making Key specifications such as the 30° V-angle and the intended use for 10 mm pitch threads give a concise basis for selecting the right accessory for a given inspection task. The part is classified as metrology accessory and designed to interface with standard measuring setups; this makes procurement straightforward and integration predictable. Where measurement uncertainty budgets are tight, choosing a defined contact accessory reduces one source of variability. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating this Microtech Metrology measuring attachment into existing inspection processes — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options Technical data SKU: 141377310T GTIN: 4061905458637 Manufacturer: Microtech Metrology Facts Angle: 30° Thread pitch reference: 10 mm Category: Accessory (metrology) Special features Application: Thread measurement accessory Storytrigger: Accessory Brand: Microtech Metrology FAQ What is the primary function of this measuring attachment? The measuring attachment from Microtech Metrology is designed to provide a fixed 30° contact geometry for reproducible thread measurement, simplifying verification of metric threads with a 10 mm pitch. Can this accessory be used on any measuring bench? Compatibility is expected with common metrology fixtures; the Microtech measuring attachment mounts as an accessory to standard inspection setups intended for thread gauging. Does the attachment support other thread pitches? The component is specified for a 10 mm pitch reference; adaptation to other pitches should be verified with technical drawings or by consulting Metav Werkzeuge for options. What documentation is supplied with the accessory? Technical information and product identification are supplied; further documentation or integration details can be requested from Metav Werkzeuge when ordering Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
30° Thread Measuring Attachment For Thread Gauge, - Microtech Metrology
Take advantage of the precise 30° profile and defined 3 mm pitch to standardise thread checks and reduce inspection time. The combination of repeatable geometry and simple integration into existing metrology setups keeps throughput high and rejects low. Order the measuring attachment directly via Metav Werkzeuge or ask the consultants for compatibility advice. Measuring Attachment 141377303T — Thread Measurement Insert TR 30° (30° angle, 3 mm pitch) by Microtech Metrology The Measuring Attachment 141377303T is a dedicated thread measurement insert for TR 30° profiles, designed as an accessory for precision measuring instruments in quality control and inspection environments. 30° thread profile for TR measurement Designed for 3 mm thread pitch Accessory for precision measuring instruments Consistent thread geometry for reliable inspection This measuring attachment delivers a defined 30° flank geometry that simplifies comparison between measured parts and reference profiles. By providing a stable contact contour, the insert reduces operator-induced variation and supports repeatable measurements in serial inspection. The result is faster go/no-go decisions and a lower rate of false rejects. The insert is intended as an accessory within a metrology chain, complementing calipers, gauges and optical comparators where a compact, profile-specific contact is required. Easy integration into metrology workflows Designed for rapid fitment to established measuring devices, the insert accommodates a 3 mm thread pitch and can be used alongside existing fixtures and gauges. Its predictable profile shortens setup times, which increases throughput on the inspection bench. For production and incoming inspection, using a purpose-made insert for TR profiles translates into measurable efficiency gains: fewer manual adjustments, clearer pass/fail criteria and more consistent documentation for traceability. Practical applications and handling guidance This thread measurement insert is well suited to routine quality control, batch testing and verification of threaded components where TR 30° geometry is specified. The accessory is compact, robust and intended for use in workshop and laboratory environments; it functions as a profile standard rather than a measuring instrument by itself. If compatibility with a specific measuring system or holder is uncertain, Metav Werkzeuge’s technical team can advise on suitable adapters and mounting options to ensure correct alignment and reliable contact. Contact Metav Werkzeuge to discuss fitment, request compatibility guidance or to order the Microtech Metrology measuring attachment 141377303T for standardised 30° thread verification Technical Data Article number: 141377303T GTIN: 4061905458538 Manufacturer: Microtech Metrology Model: Measuring Attachment (Messaufsatz) Core measurements Angle: 30° Thread pitch: 3 mm Category: Accessory / Metrology Zubehör Features and applications TR 30° thread profile for verification Designed as an accessory for precision measuring instruments Intended for quality control and serial inspection FAQ What is the primary purpose of this measuring attachment? The measuring attachment 141377303T from Microtech Metrology is intended to provide a defined 30° profile for the verification of TR thread geometries during inspection. Can the insert be used with any measuring device? The insert is designed as an accessory for precision measuring instruments; compatibility depends on the holder or adapter used — Metav Werkzeuge can advise on mounting options. Is the pitch fixed or adjustable? The insert is specified for a 3 mm thread pitch and provides the corresponding flank geometry for TR 30° checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
30° Thread Measuring Attachment For Thread Inspection - Microtech Metrology
Take advantage of precise thread inspection with a dedicated 30° measuring head and a defined 2 mm pitch specification for consistent results. Benefit from the compact, purpose-built design and rapid integration into existing inspection setups. Order the measuring attachment directly via Metav Werkzeuge or ask our consultants if needed. Measuring Attachment TR 30° — Thread measurement attachment with 30° profile and 2 mm pitch (Microtech Metrology) The Measuring Attachment TR 30° is a precision thread measurement head designed for reproducible verification of 30° thread profiles, optimised for 2 mm pitch checks in workshop and quality‑control environments. 30° measuring angle for standard thread profiles Suitable for 2 mm thread pitch verification Precision‑engineered for repeatable measurements Compatible with common inspection setups Faster, more reliable thread inspection for production control The compact head concentrates the essential geometry for thread measurement into a small, robust unit that shortens inspection cycles and reduces interpretation errors. By defining the measuring flank at 30° and referencing the 2 mm pitch, the attachment removes ambiguity when checking thread form: technicians obtain a direct, comparable measurement rather than relying on indirect visual assessments. This focus on measurable parameters improves throughput and supports consistent quality decisions on the shop floor. Seamless integration with existing metrology workflows Designed as an accessory for precision inspection equipment, the measuring head slots into established setups without complex reconfiguration. The defined angle and pitch make it straightforward to match gauge blocks, comparators or digital readouts used in the calibration chain. As a result, setup time falls and process reliability increases; traceable results are generated faster, supporting efficient batch inspections and reducing non‑productive machine time. Engineered for repeatability and clear interpretation The attachment concentrates the critical contact geometry required for accurate flank assessment. Using a dedicated measuring geometry eliminates variations introduced by improvised probes and makes measurement outcomes more reproducible. The design emphasises mechanical stability and simple handling to limit operator influence, providing a practical solution for routine checks where precision and repeatability are essential. Typical applications and where it pays off This measuring head is suitable for in‑process verification, incoming inspection of threaded components and spot checks in maintenance routines. It is particularly valuable where a known thread profile—defined by a 30° flank and 2 mm pitch—must be confirmed quickly and repeatedly. The accessory supports quality teams that require tangible evidence for acceptance decisions and helps labs maintain consistent records across shifts and operators. Contact Metav Werkzeug e GmbH in Emmerich for tailored advice on integrating the Microtech Metrology measuring attachment into existing inspection routines — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 141377302T GTIN: 4061905458347 Manufacturer: Microtech Metrology Data Angle: 30° Thread pitch: 2 mm Category: Accessories (Measurement devices → Accessories) Special features Purpose: Thread measurement (30° profile) Intended use: Verification of 2 mm pitch threads Delivery: Accessory for precision inspection setups FAQ What thread profile does the measuring head verify? The Measuring Attachment TR 30° checks a 30° thread flank profile and is specified for verification of that geometry. Is the attachment suitable for 2 mm pitch threads only? The accessory is specified with a 2 mm pitch and is optimised for reliable checks at this pitch; compatibility with other pitches depends on the inspection setup. Can the measuring head be used in production and laboratory environments? Yes, the Microtech Metrology measuring head is intended for both workshop quality control and lab spot checks where reproducible thread verification is required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
30° Thread Measuring Attachment For Tr Profile Threads - Microtech Metrology
Take advantage of consistent thread checks at a 30° measuring angle and built-in suitability for 4 mm pitch threads to speed up inspection routines; order directly via Metav Werkzeuge or consult our technical team for integration advice. Measuring attachment for thread inspection — Microtech Metrology, 30° angle, 4 mm pitch A measuring attachment designed for reliable thread profile checks at a 30° angle, intended as an accessory for metrology instruments in workshop and quality‑control environments 30° measuring angle for precise thread profiling Suited for 4 mm pitch thread inspection Accessory for measuring instruments and gauges Robust design for frequent workshop use Precision where thread form matters The attachment delivers a defined contact geometry at a 30° angle, which makes form assessment of screw threads reproducible and technically verifiable. By matching the tool geometry to the thread flank, the unit reduces interpretation errors when assessing profile deviations and wear; this contributes to faster decision making in the inspection loop. The result is less rework and a clearer pass/fail criterion for components with a 4 mm pitch. Simple integration with existing measuring setups Engineered as an accessory for standard metrology equipment, the device allows straightforward mounting and alignment without complex adaptation. Compatibility with common holders and fixtures preserves the measuring instrument's original repeatability while adding a dedicated thread‑profiling function. The compact format keeps handling ergonomic and helps maintain cycle times during serial inspections, supporting a steady production flow in machine shops. Designed for dependable workshop performance Although no specific material data are listed, the attachment is configured for regular use in industrial environments and is supplied with product images and documentation to aid selection. Its defined angle and pitch specification make it suitable for comparative checks, tool condition controls and incoming inspection tasks. Integration of this accessory supports systematic quality assurance and contributes to traceable inspection routines when combined with calibrated instruments. For dependable thread inspection with Microtech Metrology components, contact Metav Werkzeuge in Emmerich for technical advice and purchase arrangements: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 141377304T GTIN: 4061905458545 Manufacturer: Microtech Metrology Core specifications Measuring angle: 30° Thread pitch reference: 4 mm Special features Accessory for thread measurement and profile checks Category: Accessory for measuring instruments Product images and detail files available FAQ What is the primary use of this measuring attachment? The measuring attachment from Microtech Metrology is intended for thread profile checks and assists in consistent inspection of screw threads with a 30° flank geometry. Which thread pitch is it designed for? This accessory is specified for use with a 4 mm pitch and is optimised to assess the corresponding flank form reliably. Is the attachment compatible with standard measuring instruments? Yes, the accessory is designed as an add‑on for common metrology fixtures and holders to extend their capability to dedicated thread checks. How is the product identified for ordering? The item is available under article number 141377304T and can be referenced when enquiring with Metav Werkzeuge or the distributor. Can this accessory be used for production quality control? The defined contact geometry and repeatable angle make it suitable for routine quality checks, incoming inspection and tool condition assessments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
30° Thread Measuring Attachment For Trapezoidal Threads - Microtech Metrology
The combination of a dedicated 30° contact geometry and clear pitch 12 compatibility ensures repeatable thread-profile checks with minimal setup time; benefit from precise inspection and straightforward retrofitting. Order the accessory directly via Metav Werkzeuge or consult the team for application advice. Measuring attachment — Thread measuring accessory with 30° contact geometry (Microtech Metrology) The Measuring attachment is a compact inspection accessory designed to support accurate thread-profile checks on precision measuring instruments and inspection setups. 30° contact geometry for thread profiles Compatible with standard measuring instruments Single-item delivery for retrofit or replacement Precision where thread form matters The 30° contact geometry is engineered to match common triangular thread forms, reducing profile ambiguity during inspection and helping to achieve repeatable readings. By engaging the flank with a defined contact angle, the attachment minimises variation caused by uncertain seating or orientation, which is particularly relevant when verifying lead, flank angle or crest conditions. The item supports pitch 12 applications and converts a general measurement fixture into a specialised thread-checking station without the need for extensive modification, delivering a concise and reliable measurement workflow. Integrates into inspection workflows with minimal disruption Designed as an accessory for precision measuring instruments, this attachment slots into existing setups to extend capability rather than replace equipment. Integration focuses on practical efficiency: the component enables targeted checks of thread geometry within a standard inspection routine, shortening the time spent switching between gauges. The compact footprint and single-item delivery make it suitable for retrofit projects and quality-control benches where a dedicated thread-contact solution is required, keeping processes lean while increasing the range of measurable features. Robust approach to consistent outcomes Manufactured to the tolerances expected of precision metrology accessories, the measuring attachment supports consistent inspection results across repeated cycles. The construction is intended for workshop and inspection environments where reliable mechanical behaviour matters more than decorative finish; this prioritises stability and repeatability. Documentation and images are provided to assist with selection and mounting, and the accessory is practical for sample checks, production spot tests or integration into a measurement fixture where thread form verification is a recurring requirement. Contact Metav Werkzeuge for tailored advice on integrating this Microtech Metrology measuring attachment (SKU 141377312T) into existing inspection routines and to confirm suitability for specific thread profiles Technical data Article number: 141377312T GTIN: 4061905458644 Manufacturer: Microtech Metrology Category: Accessories Facts Angle: 30° Pitch: 12 Special features Intended use: thread measurement accessory Delivery: single-item (not a set) Storytrigger: accessory (Zubehör) Image assets available FAQ How does the attachment improve thread inspections? The measuring attachment from Microtech Metrology focuses contact on the thread flank with a 30° contact geometry, which reduces seating ambiguity and supports more repeatable profile checks compared with non-specialised probes. Is this accessory suitable for my existing inspection bench? The accessory is designed for integration with precision measuring instruments and inspection setups; Metav Werkzeuge can advise on mounting options and compatibility for specific benches and fixtures for SKU 141377312T. What thread pitches can be inspected with this attachment? The attachment is provided with compatibility for pitch 12, making it suitable for thread forms that use that pitch; consult Metav Werkzeuge for variants or alternative accessory options for other pitches. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
30° Thread Measuring Attachment For Trapezoidal Threads - Microtech Metrology
Take advantage of precise thread verification with a 30° profile and compatibility for a 6 mm pitch, delivering reliable inspection results and faster quality checks; order the measuring attachment directly via Metav Werkzeuge or request specialist advice from the Metav consultants. Measuring Attachment for Thread Measurement, 30° — Microtech Metrology Measuring Attachment for dedicated thread inspection and pitch verification in metrology environments, suitable as an accessory for standard measuring instruments. 30° thread profile for precise engagement Designed for 6 mm thread pitch verification Robust accessory for laboratory metrology Compatible with standard measuring instruments Faster, measurable thread inspection for production control The attachment presents a clear, technical solution for thread verification: the 30° profile engages consistently with the thread form so that pitch conformity and lead errors can be detected without complex fixturing. As a purpose-built accessory for thread checks, it shortens inspection cycles and supports repeatable measurements, making the process more efficient and reducing downstream rework. The design is optimised for integration with existing metrology setups, enabling quantified improvements in inspection throughput and traceable results. Clear function and practical benefits for workshop and QC labs Built as an instrument accessory rather than a standalone gauge, this measuring head enables straightforward verification of a 6 mm pitch thread dimension and geometry by transferring the contact condition to the measuring device. The geometry ensures stable seating on the flanks, which reduces measurement scatter caused by misalignment. For users from production inspection to tooling departments, this accessory translates geometric conformity into actionable pass/fail information, supporting reliable process control and fewer ambiguous readings during routine quality checks. Integration, documentation and procurement made simple Selection and procurement are simplified by compatibility with common metrology instruments and by clear identification: the accessory is supplied under SKU 141377306T and from the manufacturer Microtech Metrology, allowing fast cross-referencing in inspection equipment lists. For firms seeking to consolidate suppliers, this accessory fits a pragmatic testing strategy: it is a specialised tool that complements calipers, gauges and comparators by providing targeted thread assessment. Specialist advice is available to confirm fitment in specific inspection chains and to recommend complementary fixtures. For precision thread verification with Microtech Metrology’s 30° measuring attachment, contact Metav Werkzeuge in Emmerich to discuss suitability and stock availability Technical data SKU: 141377306T GTIN: 4061905458569 Manufacturer: Microtech Metrology Core specifications Thread pitch: 6 mm Profile angle: 30° Compatibility & features Application: accessory for thread measurement Category: metrology accessory / measuring instrument accessory Intended use: pitch verification and thread geometry inspection FAQ What thread pitch does this attachment support? The measuring attachment is specified for a 6 mm pitch and is designed to engage correctly with that spacing for reliable verification. Which instruments can the accessory be used with? It is intended as an accessory for standard metrology instruments and may be integrated with bench comparators, optical comparators or suitable measuring stands when correct fixturing is applied. What profile angle does the attachment use? The accessory features a 30° profile, which provides consistent flank contact for thread geometry checks. Is this accessory suitable for production-line inspection? Yes, the accessory is aimed at laboratory and production inspection scenarios where targeted thread verification and repeatable results are required; SKU 141377306T identifies the item for procurement. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
310mm Digital Caliper For Bore Centre Measurement, USB, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise workshop measurement with ISO 17025 traceability and a reliable USB data interface; the combination of robust protection and a 10–310 mm measuring range ensures reproducible results for medium-sized assemblies. Order the instrument directly via Metav Werkzeuge or ask the consultants for application advice. Digital Caliper 10–310 mm by Microtech Metrology — USB output, ISO 17025 calibrated Digital Caliper 10–310 mm is a medium-range precision instrument for internal, external and depth measurements in toolrooms and production control. ISO 17025 calibration certificate included Measurement range 10–310 mm USB data output for direct recording IP54 splash and dust protection Accurate measuring for production control and quality checks The caliper provides a measuring range of 10–310 mm with a display resolution of 0.01 mm and an indicated accuracy of ±0.03 mm, which supports consistent quality control across batches. The USB data output enables direct transfer of measurement values to data-collection systems, reducing manual transcription errors and saving time during inspection rounds. The ISO 17025 calibration and accompanying certificate make traceability immediately available for audit trails, which is especially relevant when measurements feed into quality documentation. Robust design that suits the workshop environment With an IP54 rating, the instrument tolerates workshop conditions where splash and non-corrosive dust are present, so routine use at machine benches is practical without compromising reliability. The clear digital readout (display height 11 mm) keeps values legible at a glance, supporting faster decision-making on the shop floor. The included measuring cones (Ø20 mm and Ø35 mm) extend the instrument’s versatility for bore or stepped measurements, reducing the need for multiple dedicated gauges. Practical benefits for machinists and inspection teams Classified in the medium range for calipers, this tool bridges handiness and reach: long enough for larger components yet stiff enough for single-person handling. The USB interface and compact digital electronics integrate smoothly with data-collection workflows, enabling immediate logging of results and simpler SPC uptake. The delivered calibration certificate removes setup ambiguity and means the instrument is ready for use in regulated environments. Why this caliper matters for procurement and maintenance Choosing a calibrated, data-capable caliper minimises process interruptions and supports traceable measurement practices in manufacturing and maintenance. The unit’s combination of repeatable accuracy and digital output reduces downstream rework caused by measurement uncertainty. For operations aiming to improve documentation and throughput, the instrument represents a practical step towards digitised measurement and consistent production quality. For ISO-traceable measurements and advice on integration, contact Metav Werkzeuge in Emmerich — Metav’s experts will advise on the right measuring equipment and order options via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 141730301 GTIN: 4061905452468 Manufacturer: Microtech Metrology Core specifications Measuring range: 10–310 mm Resolution: 0.01 mm Indicated accuracy: ±0.03 mm Display height: 11 mm Protection class: IP54 Data output: USB Calibration: ISO 17025 certificate included Features & accessories Digital display Included measuring cones Ø20 mm and Ø35 mm Medium-range caliper (Mittel, 300–500 mm class) suitable for larger assemblies Ready for workshop and inspection use FAQ What is the measurement range and resolution of this caliper? The digital caliper from Microtech Metrology covers 10–310 mm with a resolution of 0.01 mm, making it suitable for standard shop and toolroom measurements. Is the instrument delivered calibrated and with paperwork? Yes, the device is supplied with an ISO 17025 calibration certificate; the documentation accompanies the caliper for audit-ready traceability. How are measurement values exported from the instrument? Values are transmitted via USB output, allowing the caliper to feed data directly into recording software or inspection spreadsheets for efficient documentation. Can the caliper be used in a busy workshop environment? The instrument’s IP54 rating and robust electronics make it resistant to splashes and dust, so it is suitable for routine use at machine benches and inspection stations. Which accessories are included for specialised measurements? The caliper includes measuring cones Ø20 mm and Ø35 mm, extending its capability for bore and stepped measurements without additional gauges. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
310mm Digital Precision Caliper Colour Touchscreen, Wireless USB, ISO 17025 Calibrated, IP54 - Microtech Metrology
Take advantage of precision calibration, secure data transfer and an intuitive touchscreen for reliable medium-range measurements in production and quality control. The instrument is supplied fully calibrated to ISO 17025 with a calibration certificate and offers Wireless and USB data output for seamless integration. Order the unit directly via Metav Werkzeuge or ask Metav's consultants for application advice. Precision caliper — Microtech Metrology digital caliper with 1.5" colour touchscreen and Wireless+USB Precision caliper is a digital measuring instrument designed for accurate linear and bore measurements in workshop, toolroom and production environments, particularly suited to medium-range component work. ISO 17025 calibration certificate included Wireless and USB data output 1.5" colour touchscreen display IP54 splash and dust protection Traceable accuracy for quality assurance The caliper is delivered fully calibrated to ISO 17025, which guarantees traceability and a documented measurement baseline suitable for internal quality systems and audits. The device reads in 0.005 mm steps, so measurement tasks that demand sub‑standard digital resolution are supported with improved repeatability compared with conventional 0.01 mm displays. This level of precision shortens inspection cycles and reduces rework by providing reliable numeric evidence for acceptance decisions. Effortless data transfer and simple on‑instrument control Integrated Wireless and USB outputs remove the need for manual transcription and make process data collection straightforward. The 1.5" colour touchscreen provides an immediate visual confirmation of readings and basic menus for unit selection and zeroing, enabling faster handovers between measurement and data capture. These features support digital workflows and facilitate documentation in production or metrology software without compromising cycle time. Built for medium‑range workshop and fixture applications With a measuring span of 10–310 mm, this caliper falls into the medium category for toolroom instruments, offering a balance of reach and stiffness that suits fixtures, mould components and medium‑sized assemblies. The instrument is rated IP54 for splash and dust resistance and operates at a measurement force 1–20 N, so it withstands typical workshop conditions while maintaining contact stability. Robust construction and clear readout reduce operator influence on results and contribute to consistently reproducible measurements. Practical benefits for procurement and shopfloor integration Choosing this instrument brings measurable advantages: certified calibration reduces administrative overhead for inspection plans, digital outputs simplify traceability, and a compact touchscreen interface accelerates routine controls. Metav's role as a precision partner ensures local stock and a quality filter from Emmerich, supporting reliable supply and fast response for industrial buyers and specialist distributors. For calibrated precision with integrated data transfer, contact Metav Werkzeuge to discuss the Microtech Metrology precision caliper and arrange procurement or application support. Technical data SKU: 141730307 GTIN: 4061905037054 Brand: Microtech Metrology ECLASS: 21170344 Core specifications Measuring range: 10–310 mm Resolution: 0.005 mm Measurement force: 1–20 N Protection class: IP54 Display: 1.5" colour touchscreen Special features Data output: Wireless + USB Digital instrument (electronic readout) Supplied calibrated to ISO 17025 with certificate Suitable for workshop and production use FAQ Is the instrument delivered calibrated and traceable? Yes. The precision caliper from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes a calibration certificate for traceability and audit purposes. What measurement range and resolution does this caliper provide? The device measures from 10 to 310 mm with a display resolution of 0.005 mm, making it appropriate for medium‑range workshop and toolroom tasks. How can measurement data be exported from the caliper? Readings are available via Wireless transmission and a USB connection, enabling direct transfer into inspection software or data logging systems. Is the caliper suitable for use in a production environment? Yes. The IP54 rating and robust digital design of this digital caliper make it suitable for routine production and quality control environments where splash and dust resistance are needed. Can this instrument replace dial or analogue calipers for documentation workflows? The combination of a high‑resolution display and electronic outputs allows the instrument to integrate into digital documentation processes, reducing manual transcription and improving data reliability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com