Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
300mm Digitaler Messschieber, 0,005mm Auflösung, IP54, Force Control 1–20N, ISO17025 kalibriert, Wireless+USB - Microtech Metrology
Caliper with Force Control and Microcomputer — Digital Caliper The Caliper with Force Control and Microcomputer is a digital caliper designed for precise workshop and production measurements up to 300 mm, combining force‑controlled measuring, reliable data transfer and a compact colour touchscreen. 5 μm reading resolution selectable E‑Force control 1–20 N for reproducible force Wireless and USB data transfer modes Stainless Steel body with fine‑finished jaws Calibration certificate ISO 17025 included Exceptional precision and measurement reliability The Caliper with Force Control and Microcomputer delivers a 5 μm reading resolution with selectable display steps (0.005 / 0.01 / 0.1 mm), making it suitable for fine mechanical work and QA tasks. Its Stainless Steel construction and hand‑finished measuring faces (Ra < 0.32 μm) ensure repeatable contact geometry and long‑term stability. A factory Calibration Certificate (ISO 17025) is supplied, supporting traceability and quality assurance in manufacturing and inspection environments. Consistent results through controlled measuring force Thanks to the integrated E‑Force control module the caliper allows manual force selection between 1 and 20 N, an AUTO‑Force mode and clear colour force indication. Measuring values are captured only when the preset force is reached, which prevents operator‑dependent variations and improves reproducibility on different materials. This feature is especially valuable on soft or coated parts where lower measuring pressure reduces deformation and maintains part integrity. Seamless connectivity for Industry 4.0 workflows Equipped with Wireless and USB HID transmission modes, the instrument sends data directly to the MDS app (Windows, Android, iOS, MacOS) or acts as a keyboard input to any application. Microtech’s approach to data transfer removes the need for multiple connectors and senders: a single dongle is sufficient for PC reception, while direct wireless output to iPhone, iPad and Android devices is possible from the tool itself. For comparison, this simplification contrasts with the U‑WAVE technology from Mitutoyo. The internal memory manages 1000 values with folders and statistics, enabling offline data collection and later transfer. Designed for everyday workshop and production use With a measuring range of 0–300 mm, the caliper spans both standard and extended workshop needs, from routine part checks to larger assembly measurements. The compact 1.5" colour touchscreen provides clear numeric readout and menu access for functions such as Go/NoGo, Max/Min, Formula input, Timer, linear and temperature correction. An IP54 rating protects against splash and dust in typical industrial environments, while the rechargeable Li‑Pol battery (300 mAh) and USB‑C socket ensure convenient charging and data connectivity on the bench. Strong recommendation: For demanding metrology tasks, choose this Microtech Metrology caliper with force control — for personalised advice and application support contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Bezeichnung: Caliper with Force Control and Microcomputer Marke: Microtech Metrology SKU: 141077030A Measuring Range: 0–300 mm Resolution / Readout: 0.005 mm (5 μm) selectable to 0.01 / 0.1 mm Measuring Force: 1–20 N, manual selection, AUTO‑Force mode, force indication Data Output: Wireless + USB HID (Wireless HID+MAC option available) Display: Colour 1.5" Touchscreen Memory Manager: 1000 values with folders and statistics, memory data transfer Functions: Go/NoGo, Max/Min, Formula, Timer, Linear correction, Temperature correction, Resolution selection, Peak, Limits, Firmware update E‑Force Control: Force selection, AUTO‑Force, colour force feedback Body Material: Stainless Steel with hand finished measuring faces (Ra <0.32 μm) Battery: Rechargeable Li‑Pol battery 300 mAh, USB‑C charging/data socket IP Rating: IP54 Calibration: Calibration certificate included (ISO 17025, Ilac MRA) Patents: US10184772, UA174949, UA126928 digital: true Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What is the advantage of the force control on the Caliper with Force Control and Microcomputer by Microtech Metrology? The force control on the Caliper with Force Control and Microcomputer allows setting a consistent measuring pressure between 1 and 20 N so readings are taken only when the preset force is reached, reducing operator variability and protecting delicate surfaces. Can the Caliper with Force Control and Microcomputer connect to my PC and smartphone? Yes, the Caliper with Force Control and Microcomputer by Microtech Metrology supports Wireless to the MDS app (Windows, Android, iOS, MacOS) and USB HID modes so it can transmit data directly to PCs and mobile devices without complex adapters. Is the Caliper with Force Control and Microcomputer supplied with a traceable calibration? The Caliper with Force Control and Microcomputer includes an ISO 17025 calibration certificate, providing documented traceability suitable for quality systems and inspection records. How long does the battery last and how is it charged on the Caliper with Force Control and Microcomputer? The Caliper with Force Control and Microcomputer uses a rechargeable Li‑Pol battery (300 mAh) and is charged via a USB‑C socket that also supports data transfer, allowing quick and convenient recharging at the workstation. Not sure if this caliper meets your requirements or need additional technical data? METAV Werkzeuge offers comprehensive, expert advice for complex measuring tools; please contact METAV Werkzeuge for personalised support: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271
300mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, ISO 17025 kalibriert - Microtech Metrology
Kompakte, geprüfte Präzision: Der Messschieber vereint Auflösung 0,01 mm, ISO 17025‑Kalibrierung und IP67‑Schutz zu einem messbereiten Werkzeug für Werkstatt und Prüffeld. Die Kombination aus verlässlicher Kalibrierung, robuster Dichtung und digitaler Anzeige gewährleistet reproduzierbare Messergebnisse. Bestellen Sie den Messschieber direkt über Metav Werkzeuge oder kontaktieren Sie unsere Beratung bei technischen Fragen. Messschieber von Microtech Metrology (digitaler Messschieber, 0–300 mm) Der Messschieber ist ein digitaler Präzisionsschieber für Werkstatt‑ und Qualitätskontrollen bis 300 mm mit großer Swiss Digit Anzeige zur schnellen Ablesung. Messbereich bis 300 mm für Maschinenbau und Werkstatt Auflösung 0,01 mm für feine Messungen Swiss Digit Anzeige mit 11 mm Ziffernhöhe IP67 Schutz für staub‑ und wassergeschützten Einsatz Kalibriert ausgeliefert mit ISO 17025‑Zertifikat Geprüfte Messgenauigkeit für reproduzierbare Ergebnisse Die ISO 17025‑Kalibrierung sorgt dafür, dass Messergebnisse rückführbar und dokumentiert sind. Mit einer Auflösung von 0,01 mm lässt sich die Anzeige fein ablesen; die angegebene Genauigkeit von 0,04 mm beschreibt die typische Fehlergrenze dieses Modells im Werkstattalltag. Für Betriebe, die Prüfprozesse standardisieren wollen, bietet die geprüfte Auslieferung mit Kalibrierzeugnis klare Nachweisbarkeit gegenüber internen und externen Prüfprotokollen. Robustheit und Schutz für den rauen Arbeitsalltag Die Schutzart IP67 ermöglicht Messungen selbst in staubiger Umgebung oder bei kurzzeitigem Kontakt mit Wasser, ohne dass die Elektronik beeinträchtigt wird. Durch die digitale Anzeige mit 11 mm Ziffernhöhe werden Messwerte schneller erfasst, was die Prozesszeit in der Fertigung reduziert. Die Ausführung richtet sich an Anwender, die neben Präzision auch eine belastbare Einsatzfähigkeit unter wechselnden Bedingungen erwarten. Universelle Einsetzbarkeit in Werkstatt und Prüffeld Als Vertreter der Standard‑Klasse deckt der Schieber den typischen Bereich für Maschinen‑ und Metallbau ab. Typische Einsatzgebiete sind Maßkontrollen an Bauteilen, Einbau‑ und Montageprüfungen sowie Stichproben in der Fertigung. Anwender aus Maschinenbau, Werkstatt und Qualitätssicherung profitieren von der Kombination aus Reichweite, Handhabung und digitaler Ablesbarkeit für effiziente Routineprüfungen. Vorteile der digitalen Anzeige und Praxisnutzen Die Swiss Digit Anzeige verbessert die Bedienergeschwindigkeit und senkt Ablesefehler gegenüber mechanischem Nonius; die digitale Technik unterstützt schnelle Dokumentation und reduziert Nacharbeitsaufwand. Die gelieferte Kalibrierung nach ISO 17025 reduziert den internen Aufwand für Erstprüfungen und sorgt dafür, dass das Werkzeug sofort in normkonformen Abläufen eingesetzt werden kann. Metav Werkzeuge empfiehlt den kalibrierten Messschieber von Microtech Metrology wegen der geprüften Messverläßlichkeit und des IP67‑Schutzes für alle Prüfstellen, die belastbare, reproduzierbare Messergebnisse benötigen — technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 141650303 Marke: Microtech Metrology Bezeichnung: Messschieber mit 4 auswechselbaren Spitzen GTIN: 4061905451454 Daten Messbereich: 0–300 mm Ablesung: 0,01 mm Genauigkeit: 0,04 mm Besonderheiten IP Schutz: IP 67 (Staub‑ und Wasserschutz) Digitalanzeige: Swiss Digit, Ziffernhöhe 11 mm ISO 17025 Kalibrierung: vollständig kalibriert ausgeliefert; Kalibrierzeugnis eClass: 21170344 Digitale Ausführung FAQ Welche Messbereiche deckt der Schieber ab? Der Messschieber von Microtech Metrology (Artikelnummer 141650303) deckt einen Messbereich von 0–300 mm ab und gehört damit zur Standard‑Klasse für Maschinen‑ und Metallbau. Wie genau ist die Messung mit diesem Messschieber? Die Ausführung bietet eine Ablesung von 0,01 mm und eine praktische Genauigkeit von etwa 0,04 mm, was für viele Fertigungs‑ und Prüfaufgaben ausreichende Präzision liefert. Wird das Werkzeug kalibriert geliefert? Ja, der Messschieber wird vollständig kalibriert ausgeliefert; die Kalibrierung erfolgte nach ISO 17025 und ein entsprechendes Kalibrierzeugnis liegt bei. Was bedeutet IP67 bei diesem Messschieber? IP67 bezeichnet den Schutz gegen Eindringen von Staub und gegen zeitweiliges Untertauchen in Wasser, was den Einsatz in rauen Werkstattumgebungen erleichtert. Wie ist die Anzeige ausgeführt und wie gut ist die Ablesbarkeit? Die Anzeige arbeitet mit einer Swiss Digit Anzeige und einer Ziffernhöhe von 11 mm, was die Ablesung von Messwerten beschleunigt und Ablesefehler reduziert. Hersteller: Microtech, Nizhneyurkovska str. 45a; 04080 Kyiv; Ukraine; tool@microtech.tools
300mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, ISO 17025 kalibriert, ABS Messsystem, lange Backe 100mm - Microtech Metrology
Die Kombination aus hoher Messgenauigkeit, robuster Schutzklasse und ausgeliefertem Kalibrierzeugnis sorgt für verlässliche Messdaten und weniger Nacharbeit in der Fertigung. Profitieren Sie von der digitalen Ablesung mit feiner Auflösung und der Schutzklasse gegen Staub und Spritzwasser; bei Bedarf steht die Beratung durch Metav Werkzeuge zur Verfügung. Messschieber Digital von Microtech Metrology Der Messschieber ist ein digitaler Präzisionsschieber für industrielle Messaufgaben bis 300 mm und eignet sich für Qualitätskontrolle und Werkstattmessungen. Digitale Ablesung 0,01 mm Präzision ±0,03 mm für Standardkontrollen Robust dank IP 67 Schutzklasse Swiss electric Display mit 11 mm Ziffernhöhe Lange Messschnabel-Spitze für tiefe Innenmessungen Präzise Messwerte für routinemäßige Qualitätskontrollen Die 0,01 mm Ablesung ermöglicht schnelle und eindeutige Messergebnisse, während die Genauigkeit von ±0,03 mm den Anforderungen im Maschinenbau und in der Werkstattindustrie entspricht. Das ABS Messsystem bietet den Vorteil stabiler Referenzen ohne Nullverlust beim Batteriewechsel, wodurch Messabläufe effizient bleiben. Anwender profitieren von klaren Ziffern auf dem Swiss electric Display, das auch in weniger optimal beleuchteten Arbeitsumgebungen gut ablesbar ist. Schutz und Mechanik für den rauen Werkstattalltag Der Messschieber wurde mit einem Querschnitt von 17x5 mm und einer Schnabellänge von 100 mm konstruiert, um sowohl Stabilität als auch Reichweite zu gewährleisten. Die Schutzart IP 67 sorgt dafür, dass Staubdichtigkeit und kurzzeitiges Untertauchen die Funktion nicht beeinträchtigen; das reduziert Ausfallzeiten durch Verschleiß oder Umwelteinflüsse. Durch die robuste Ausführung eignen sich die Komponenten besonders für den täglichen Einsatz in Fertigung und Montage. Einsatzbereiche, Kalibrierung und Anwenderkomfort Als Standardausführung mit einem Messbereich bis 300 mm deckt das Gerät typische Werkstattaufgaben und Prüfvorgänge in der Serienfertigung ab. Die Auslieferung erfolgt vollständig kalibriert; ein Kalibrierzeugnis nach ISO 17025 wird mitgeliefert und schafft direkte Nachweisbarkeit für interne und externe Prüfprozesse. Die einfache Bedienung und die digitale Anzeige reduzieren Messfehler und beschleunigen Prüfzyklen, was zu messbarer Effizienzsteigerung in Prüflaboren führt. Nutzen Sie die Präzision von Microtech Metrology: Fordern Sie Ihr Kalibrierzeugnis an und bestellen Sie den Messschieber über Metav Werkzeuge; Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 verfügbar. Produktmerkmale Artikelnummer: 141072311 Marke: Microtech Metrology Bezeichnung: Messschieber Messsystem: ABS Digital Anzeige: Swiss electric Digit Höhe 11mm GTIN: 4061905454837 Fakten Genauigkeit: 0,03 mm Ablesung: 0,01 mm Messbereich: 0-300 mm Messbereich Maximal: 300 mm Messbereich Minimal: 0 mm Schnabellänge: 100 mm Querschnitt: 17x5 mm Besonderheiten IP 67: Staub- und wassergeschütztes Gehäuse für rauen Einsatz ISO 17025 Kalibrierung: Kalibrierzeugnis wird mitgeliefert Digital: Elektronische Anzeige zur schnellen und exakten Ablesung ABS: Absolutes Messsystem, zuverlässige Referenz beim Batteriewechsel FAQ Wie genau ist die Messung mit dem Messschieber? Der Messschieber von Microtech Metrology liefert eine Ablesung von 0,01 mm bei einer Genauigkeit von ±0,03 mm und ist damit für Standardprüfungen im Maschinenbau geeignet. Wird der Messschieber kalibriert geliefert? Ja, der Messschieber wird vollständig kalibriert ausgeliefert; das Kalibrierzeugnis nach ISO 17025 liegt dem Gerät bei. Ist das Display auch in schattigen Arbeitsbereichen gut ablesbar? Das Swiss electric Display mit 11 mm Ziffernhöhe sorgt für gute Lesbarkeit auch bei eingeschränkter Beleuchtung; damit lassen sich Messwerte schnell und zuverlässig dokumentieren. Für welche Anwendungen eignet sich der Messschieber am besten? Der Messbereich bis 300 mm macht den Messschieber ideal für Werkstattmessungen, Prüfstände in der Serienfertigung und Qualitätskontrollen im Metallbau. Welche Schutzklasse hat das Gerät und was bedeutet das für den Einsatz? Mit der Schutzart IP 67 ist das Gerät staubdicht und kurzfristig wasserdicht, wodurch es für anspruchsvolle Umgebungen in Produktion und Montage geeignet ist. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digitaler Präzisionsmessschieber, 0,01mm, ISO 17025 kalibriert - Microtech Metrology
Der Präzisionsmessschieber von Microtech Metrology bietet eine kombinierte Lösung aus digitaler Ablesung 0,01 mm, gehärteten Messflächen und vollständiger ISO 17025‑Kalibrierung, was ihn besonders für qualitätskritische Werkstätten und Fertigungsprüfungen geeignet macht. Nutzen Sie die geprüfte Genauigkeit und die robuste Verarbeitung für zuverlässige Messprozesse und fragen Sie bei Bedarf die Beratung oder Lieferung über Metav Werkzeuge an. Präzisionsmessschieber – Digitaler Messschieber 0–300 mm von Microtech Metrology Der Präzisionsmessschieber ist ein digitaler Werkstatt‑Und Prüf‑Messschieber mit Messbereich 0–300 mm für Standardanwendungen im Maschinen‑ und Metallbau. Kalibrierung nach ISO 17025 inklusive Kalibrierzeugnis Digitale Anzeige mit Ablesung 0,01 mm, Displayhöhe 11 mm Messbereich 0–300 mm, Werkstatt‑Standard Gehärtete Messflächen und handgefertigte Messbacken Tiefenmaß und Feineinstellung für präzise Messführung Präzise Messwerte für den Werkstattalltag und die Produktionskontrolle Der Präzisionsmessschieber liefert mit der digitalen Anzeige eine Ablesung von 0,01 mm, womit typische Werkstatt‑ und Prüfaufgaben zuverlässig abgearbeitet werden können. Bei digitalen Messschiebern dieses Messbereichs ist eine typische Fehlergrenze von bis zu ±0,03 mm anzusetzen (nach DIN 862), was den Schieber zur geeigneten Wahl für Serienprüfungen, Einstellarbeiten und Qualitätskontrollen macht. Der direkte Nutzen für Anwender liegt in schnell verfügbaren, reproduzierbaren Messungen, die die Nacharbeit reduzieren und die Prozesssicherheit erhöhen. Robuste Verarbeitung und ergonomische Bedienung für wiederholte Messungen Gehärtete Messflächen und handgefertigte Messbacken sorgen für eine verschleißarme Kontaktfläche und lange Messgenauigkeit auch bei häufiger Nutzung. Die Feineinstellung ermöglicht kontrolliertes Annähern an das Werkstück, während das integrierte Tiefenmaß zusätzliche Messfunktionen ermöglicht. Dieser Aufbau reduziert Messfehler durch falsche Handhabung und erhöht die Lebensdauer des Werkzeugs, was für Werkstätten mit regelmäßigem Messbedarf wirtschaftliche Vorteile bringt. Kalibrierung, Nachweis und Qualitätssicherung Das Gerät wird vollständig kalibriert ausgeliefert; eine ISO 17025‑Kalibrierung mit Kalibrierzeugnis liegt bei. Damit eignet sich der Schieber für Prüfprozesse, die dokumentierte Rückverfolgbarkeit verlangen. Für Anwender bedeutet das: Messwerte können in Prüfberichten herangezogen werden, interne Qualitätskontrollen sind einfacher nachweisbar, und Reklamationszeiten verkürzen sich durch nachvollziehbare Kalibrierdaten. Einsatzbereiche und Anwendernutzen Mit einem Messbereich von 0–300 mm gehört das Messgerät zur Standardklasse für Maschinenbau, Metallbearbeitung und Werkzeugbau. Es richtet sich an Montage‑ und Prüfpersonal, Qualitätslabore und Fachbetriebe, die auf wiederholbare und dokumentierbare Ergebnisse angewiesen sind. Die Kombination aus digitaler Messung, robusten Messflächen und ISO‑Zertifikat reduziert Stillstandszeiten, minimiert Nacharbeit und erhöht die Planbarkeit von Fertigungsprozessen. Für geprüfte Präzision: Den kalibrierten Präzisionsmessschieber von Microtech Metrology (ISO 17025‑Zertifikat) direkt über Metav Werkzeuge anfragen – E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 141072322C Marke: Microtech Metrology Bezeichnung: Präzisionsmessschieber GTIN: 4061905200601 Daten Messbereich: 0–300 mm Ablesung: 0,01 mm Digitalanzeige Höhe: 11 mm Schnabellänge: 60/21 Besonderheiten Handgefertigte Messbacken Messflächen: gehärtet Tiefenmaß Digitale Anzeige ISO 17025 Kalibrierung (Kalibrierzeugnis beiliegend) FAQ Wie genau lässt sich mit dem Messschieber messen? Die digitale Anzeige des Präzisionsmessschiebers von Microtech Metrology ermöglicht eine Ablesung von 0,01 mm; für den Messbereich bis 300 mm ist eine übliche Messfehlergrenze von bis zu ±0,03 mm nach DIN 862 zu berücksichtigen. Die ISO 17025‑Kalibrierung des Geräts (SKU 141072322C) dokumentiert die tatsächliche Messgüte. Wird der Messschieber kalibriert geliefert? Ja, der Präzisionsmessschieber von Microtech Metrology (Artikelnummer 141072322C) wird mit vollständiger ISO 17025‑Kalibrierung und Kalibrierzeugnis ausgeliefert, sodass Messergebnisse sofort in Prüfprozessen verwendet werden können. Für welche Anwendungen ist das Gerät am besten geeignet? Der Messbereich 0–300 mm macht den Schieber ideal für Maschinen‑ und Metallbau, Werkzeugmontage und seriennahe Qualitätskontrollen. Der Präzisionsmessschieber von Microtech Metrology eignet sich besonders dort, wo reproduzierbare, dokumentierte Messergebnisse erforderlich sind. Welche zusätzlichen Messfunktionen sind verfügbar? Neben Außen‑ und Innenmessungen ermöglicht der Schieber das Messen mit integriertem Tiefenmaß sowie präzise Einstellung über die Feineinstellung, was das Handling bei wiederkehrenden Messaufgaben vereinfacht. Wie pflege ich die Messflächen am besten? Messflächen und handgefertigte Messbacken des Präzisionsmessschiebers von Microtech Metrology sollten trocken und sauber gehalten werden; leichte Schmierung mit geeignetem Korrosionsschutz und das Vermeiden von Stößen verlängern die Präzision und Lebensdauer. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
300mm Digitaler Universal-Messschieber, 0,001mm, IP54, Force Control, Kalibriert nach ISO 17025 - Microtech Metrology
Nutzen Sie die Kombination aus hoher Auflösung, drahtloser Datenübertragung und ISO‑17025‑Kalibrierung für verlässliche Serienmessungen. Bestellen Sie den Universal-Messschieber direkt über Metav Werkzeuge oder fragen Sie unsere Beratung an. Universal-Messschieber von Microtech Metrology Der Universal-Messschieber ist ein digitaler Präzisionsschieber mit 0,001 mm Auflösung und Wireless+USB Datenausgang, ideal für Fertigung, Qualitätssicherung und Werkstattmessungen. ISO 17025 Kalibrierzeugnis inklusive Auflösung 0,001 mm für Hochpräzision Color 1.5" Touchscreen für einfache Anzeige Wireless+USB Datenausgang für Industrie 4.0 IP 54 Schutz für Werkstattumgebung Präzision für wiederholbare Produktionsmessungen Die messbare Auflösung von 0,001 mm macht den Messschieber zur Wahl, wenn enge Toleranzen eingehalten werden müssen. In Kombination mit der werkseitigen ISO 17025 Kalibrierung wird die Messunsicherheit dokumentiert und die Rückverfolgbarkeit gewährleistet, was Audit‑ und Lieferantenanforderungen erleichtert. Das geringe Gewicht des Schiebers sorgt für einfache Handhabung bei Serienmessungen, sodass Messzyklen effizient bleiben. Effizienter Datenfluss direkt ins Messprotokoll Der integrierte Wireless+USB Datenausgang ermöglicht das schnelle Übertragen von Messwerten in Prüfsoftware oder Tabellen, wodurch manuelle Übertragungsfehler reduziert werden. Das Color 1.5" Touchscreen erleichtert das Ablesen und Menüführen direkt am Gerät, was Einarbeitungszeiten verkürzt und Messabläufe beschleunigt. So lassen sich Messdaten in der Fertigung unmittelbar verarbeiten und Qualitätssicherungsprozesse optimieren. Robustheit und Eignung für den Werkstatteinsatz Als Standard-Messschieber mit einem Messbereich bis 300 mm bietet das Gerät das bewährte Verhältnis aus Reichweite und Steifigkeit, das in Werkstätten und im Maschinenbau gefragt ist. Der IP 54 Schutz hält Spritzwasser und Staub fern und sichert verlässliche Messergebnisse auch unter rauen Bedingungen. Die messbare Messkraftspanne von 1–20 N unterstützt reproduzierbare Anpressbedingungen bei empfindlichen Bauteilen. Zubehör, Anwendung und Zielgruppe Lieferumfang und Ausstattung berücksichtigen den Montage‑ und Produktionsalltag: Das Set enthält Aufsatzbacken in drei Paaren, die das Messen von Profilen und schwer zugänglichen Flächen erleichtern. Entwickelt für Qualitätsprüfer, Fertigungsleiter und Werkzeugmacher, eignet sich das Gerät für Serienmessungen, Stichprobenprüfungen und dokumentierte Prüfprotokolle in der Werkstatt und am Prüfplatz. Empfehlung: Metav Werkzeuge empfiehlt den Einsatz des Microtech Metrology Universal‑Messschiebers für präzise Prozesskontrolle und dokumentierte Kalibrierbarkeit; bei Fragen steht der Metav Kundenservice zur Verfügung – eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930, WhatsApp +49 170 2837271 Produktmerkmale Artikelnummer: 141630308 GTIN: 4061905036613 Marke: Microtech Metrology Bezeichnung: Universal-Messschieber Messbereich: 0–300 mm Fakten Auflösung: 0,001 mm Messbereich Maximal: 300 mm Messkraft: 1–20 N Besonderheiten Display: Color 1.5" Touchscreen Datenausgang: Wireless+USB Zubehör: mit 3 Paar Aufsatzbacken ISO 17025 Kalibrierung: Kalibrierzeugnis liegt bei IP 54: Schutz gegen Spritzwasser und begrenzte Staubeinwirkung FAQ Wie genau ist die Messanzeige des Messschiebers? Die Anzeige bietet eine Auflösung von 0,001 mm; zusammen mit der ISO 17025 Kalibrierung des Microtech Metrology Universal‑Messschiebers lassen sich Messergebnisse mit dokumentierter Rückverfolgbarkeit erzielen. Ist eine Kalibrierung im Lieferumfang enthalten? Ja, der Universal‑Messschieber wird mit einem Kalibrierzeugnis nach ISO 17025 ausgeliefert, sodass das Gerät sofort für qualitätsrelevante Prüfungen einsetzbar ist. Wie werden Messdaten übertragen? Der Microtech Metrology Universal‑Messschieber verfügt über einen Wireless+USB Datenausgang, der das direkte Übertragen von Messwerten in Prüfsoftware oder Datenerfassungs‑Systeme ermöglicht. Für welche Einsatzbereiche eignet sich der Messschieber? Der Messbereich bis 300 mm klassifiziert das Gerät als Standard‑Messschieber, ideal für Maschinenbau, Werkzeugbau und Qualitätssicherung bei Serien‑ und Stichprobenmessungen. Welche Schutzart und Umgebungsbedingungen sind möglich? Mit IP 54 ist der Messschieber gegen Spritzwasser und begrenzte Staubeinwirkung geschützt und damit für die meisten Werkstattbedingungen geeignet. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digitaler Universal‑Messschieber, 0,01mm Anzeige, IP67, ISO 17025 Kalibrierzertifikat - Microtech Metrology
Kombinieren Sie die ISO‑17025‑Kalibrierung, den IP67‑Schutz und die gut ablesbare Swiss Digital Anzeige für zuverlässige Werkstattmessungen; bestellen Sie den Universal‑Messschieber direkt über Metav Werkzeuge oder sprechen Sie unsere technische Beratung an. Universal‑Messschieber von Microtech Metrology Der Universal‑Messschieber ist ein digitaler Präzisionsschieber für Werkstatt und Qualitätssicherung mit einem Messbereich von 0–300 mm. ISO‑kalibriert und Kalibrierzeugnis inklusive IP67 Schutz gegen Staub und Spritzwasser Swiss Digital Anzeige, Höhe 11 mm, gut ablesbar Messbereich 0–300 mm, universell einsetzbar Handgefertigte Messbacken und selbstschmierend Präzision und Kalibrierung für die Qualitätskontrolle Der Microtech Metrology Universal‑Messschieber liefert eine digitale Ablesung von 0,01 mm und eine angegebene Genauigkeit von 0,04 mm, was zuverlässige Messergebnisse für viele Produktions‑ und Prüfaufgaben gewährleistet. Die Auslieferung erfolgt mit ISO‑17025‑Kalibrierung und dem zugehörigen Kalibrierzeugnis, sodass Messergebnisse direkt in Prüfprotokolle übernommen werden können. Diese Kombination aus digitaler Auflösung und formaler Kalibrierung reduziert Prüfaufwand und erhöht die Nachvollziehbarkeit der Messungen. Robuste Bauweise für den Alltag in der Werkstatt Mit dem IP67‑Schutz ist der Schieber gegen eindringenden Staub und zeitweiliges Untertauchen geschützt, was den Einsatz an verschmutzten oder feuchten Arbeitsplätzen ermöglicht. Die handgefertigten Messbacken sorgen für formstabile Auflageflächen, während die selbstschmierende Oberfläche die Gleiteigenschaften verbessert und Wartungsintervalle verlängert. So bleibt die Genauigkeit auch unter rauen Betriebsbedingungen erhalten. Vielseitige Anwendung für Fertigung und Qualitätssicherung Der Messbereich von 0–300 mm klassifiziert den Schieber in die Standard‑Gruppe, die in Maschinen‑ und Metallbau sowie in der Werkstattmessung am häufigsten benötigt wird. Das mitgelieferte Zubehör umfasst Aufsätze für Innen‑ und Außennuten 10 mm, Innen‑ und Außenpunkte Ø3×10 mm sowie einen Teller Ø50 mm, wodurch spezielle Messaufgaben direkt umgesetzt werden können. Anwender profitieren von geringem Rüstaufwand und hoher Flexibilität bei wechselnden Prüfaufgaben. Ergonomie und Bedienkomfort für schnelle Messungen Die Swiss Digital Anzeige mit einer Höhe von 11 mm ermöglicht schnelle und sichere Ablesungen, auch unter Maschinenbeleuchtung. Die digitale Elektronik unterstützt eine zügige Datenerfassung mit einer Auflösung von 0,01 mm, was Messungen beschleunigt und Tippfehler reduziert. Die Konstruktion ist auf Einhandbedienbarkeit ausgelegt, sodass Messungen effizient in Fertigungsabläufe integriert werden können. Empfehlung: Für präzise Werkstatt‑ und Prüfaufgaben das ISO‑kalibrierte Microtech Metrology Universal‑Messschieber über Metav Werkzeuge wählen und bei technischen Fragen die Produktberatung unter info@metav-werkzeuge.com kontaktieren. Produktmerkmale Artikelnummer: 141630303 Marke: Microtech Metrology Bezeichnung: Universal‑Messschieber GTIN: 4061905037610 Daten Messbereich: 0–300 mm Genauigkeit: 0,04 mm Ablesung: 0,01 mm IP‑Schutz: IP 67 Digitalanzeige: Swiss Digital, Höhe 11 mm Besonderheiten Handgefertigte Messbacken Selbstschmierend Zubehör: Aufsätze Innen‑ und Außennuten 10 mm Zubehör: Innen‑ und Außenpunkt Ø3×10 mm Zubehör: Teller Ø50 mm ISO‑17025 Kalibrierung (Kalibrierzeugnis wird mitgeliefert) ECLASS: 21170344 FAQ Wie genau ist das Messgerät in der Praxis? Die angegebene Genauigkeit liegt bei 0,04 mm, die digitale Ablesung erfolgt in Schritten von 0,01 mm. Der Microtech Metrology Universal‑Messschieber eignet sich damit für Standard‑Prüfaufgaben in Werkstatt und Fertigung, ergänzt durch das mitgelieferte Kalibrierzeugnis nach ISO‑17025. Ist das Gerät für feuchte oder verschmutzte Umgebungen geeignet? Ja, der Universal‑Messschieber verfügt über einen IP67‑Schutz, der Staub‑ und zeitweilige Feuchtebelastung abdeckt, wodurch der Einsatz direkt an Bearbeitungsmaschinen und in feuchteren Bereichen möglich ist. Welche Messaufgaben lassen sich mit dem Schieber abdecken? Mit einem Messbereich von 0–300 mm und dem beiliegenden Zubehör für Nuten‑ und Punktmessungen deckt der Schieber Außen‑, Innen‑ und spezielle Aufgaben in Maschinenbau, Formenbau und Qualitätssicherung ab. Wird ein Kalibrierzeugnis mitgeliefert? Ja, das Gerät wird vollständig kalibriert ausgeliefert. Die Kalibrierung erfolgte nach ISO‑17025 und das entsprechende Kalibrierzeugnis liegt bei. Welche Eigenschaften verbessern die Langzeitstabilität der Messung? Die Kombination aus handgefertigten Messbacken, selbstschmierender Oberfläche und robuster Dichtung trägt zur Stabilität der Messwerte und zur Reduzierung von Wartungsaufwand bei. Hersteller: Microtech Metrology; Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
300mm Inside Caliper Digital Colour 1.54" Display, IP54 Wireless/USB - Microtech Metrology
Take advantage of a robust measuring instrument that combines a wide 22–300 mm range with reliable ±0.05 mm accuracy and convenient digital data transfer. The combination of workshop-grade ingress protection and wireless plus USB output supports efficient quality routines on the shop floor. Order the internal digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Internal digital caliper — Wireless + USB, IP54 (Microtech Metrology) The internal digital caliper provides a compact, colour-display instrument for precise internal and external measurements across standard workshop tasks, from maintenance to production control. Wireless and USB data output IP54 protection for workshop environments 22–300 mm measuring range Colour 1.54" display with 0.005 mm reading Reliable reach and practical stiffness for daily use The instrument is classified as a Standard caliper with a measuring range of 22–300 mm, a span that balances reach and stiffness for routine tasks in the machine shop and metalworking environment. This range is ideal for typical components such as housings, bearings and medium-sized assemblies where single-handed handling and reproducible support are required. The specified ±0.05 mm accuracy gives a clear expectation of measurement uncertainty; combined with the fine 0.005 mm display reading, this enables fast decisions in production control while keeping measurement uncertainty visible to operators. Faster documentation and fewer transcription errors Equipped with Wireless and USB data outputs and a 1.54" colour display, the device streamlines data capture and reduces manual entry. Measurement values can be exported directly to collection software or recorded via USB for traceability, which shortens inspection cycles and improves workflow efficiency. The readable colour display supports quick verification at the bench, while the sealed design helps maintain functionality in environments prone to chips or coolant splash. Built for consistent results and workshop resilience The caliper features a jaw length 150 mm suitable for internal reach and stable contact. With an IP54 rating, the instrument withstands dust ingress and splashing water typical of workshop settings, contributing to long-term reliability. The construction, combined with the digital electronics and clear display, supports reproducible measurements and easier integration into quality processes. As part of a measured approach to production, this tool helps maintain consistent tolerances without adding undue handling complexity. For procurement or technical consultation on the Microtech Metrology internal digital caliper (SKU 141210307), contact Metav Werkzeuge for local supply and advice. Technical data Article number: 141210307 GTIN: 4061905457814 Manufacturer: Microtech Metrology ECLASS: 21170344 Facts Measuring range: 22–300 mm Accuracy: ±0.05 mm Reading / resolution: 0.005 mm Jaw length: 150 mm Display: 1.54" colour Protection class: IP54 Special features Wireless + USB data output Digital caliper design for internal and external measurement Standard workshop category for general machine‑shop tasks Clear colour display for rapid readout FAQ What measuring range does the caliper cover? The internal digital caliper covers a range of 22–300 mm, suited to standard workshop measuring tasks and medium‑sized components. How precise is the instrument for routine inspections? The instrument provides an accuracy of ±0.05 mm with a display resolution of 0.005 mm, which supports consistent routine inspections and clear visual readout. How can measurement data be transferred to a PC or data system? Measurement values can be exported via Wireless or USB data outputs for direct capture into inspection software or SPC systems. Is the caliper protected against workshop contaminants? Yes, the caliper has an IP54 rating, offering protection against dust ingress and splashing liquids, appropriate for typical bench and production environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Internal Caliper Digital 0.01mm Resolution IP54, USB Output - Microtech Metrology
Take advantage of a robust combination of a clear digital display, reliable USB data transfer and IP54 splash protection for repeatable internal measurements; this configuration supports efficient documentation and reduces downstream rework. Order the internal digital caliper directly via Metav Werkzeuge or ask the consultants for tailored integration options. Internal Digital Caliper (Innen-Messschieber) — Microtech Metrology, USB data output & IP54 Innen-Messschieber — a compact, workshop-ready internal caliper for precision internal dimensioning across general metalworking and quality-control tasks Digital display 13 mm height USB data output for traceable records IP54 splash-resistant housing Measuring range 22–300 mm Reliable data transfer for traceable measurements The instrument combines a clear digital display with a dedicated USB interface to enable fast, error‑reduced data capture and straightforward integration into measurement logs or SPC workflows. The electronic readout with a resolution of 0.01 mm and an indicated accuracy of ±0.05 mm provides a dependable numeric basis for pass/fail decisions and dimensional reporting. With direct data export, manual transcription is minimised and traceability is strengthened — a practical advantage when repeatability and documentation speed determine throughput. Engineered for everyday workshop use Designed for internal measurements, this caliper covers the Standard measuring class up to 300 mm, offering a well-balanced combination of reach and rigidity suitable for machine shops and toolrooms. The 150 mm jaw length supports access to deeper bores while the compact digital display remains readable under typical workshop lighting. The IP54 rating confirms protected operation against dust ingress and splashing coolant or cutting fluid, making the tool resilient for routine shop‑floor measurement tasks where robustness matters. Integration, durability and operational benefits Beyond measurement data, the caliper’s solid electronic package simplifies the transition to digital quality processes: reliable readings, consistent display height and a durable construction reduce handling errors and downtime. The instrument is compatible with common PC logging routines via USB, enabling centralised data collection and quicker analysis. Metav’s emphasis on accessible precision means this tool is offered as part of a wider selection of calibrated instruments and accessories that help standardise quality procedures across workshops. For measurable improvements in internal dimensioning, contact Metav Werkzeuge to arrange supply of the Microtech Metrology internal digital caliper with USB output and IP54 protection and discuss integration into existing measurement routines. Technical data Article number: 141210300 GTIN: 4061905082061 Manufacturer: Microtech Metrology ECLASS: 21170344 Dimensions & performance Measuring range: 22–300 mm Resolution (display): 0.01 mm Accuracy: ±0.05 mm Display height: 13 mm Jaw length: 150 mm Special features Digital caliper for internal measurements USB data output for direct transfer IP54 splash-resistant housing Classification: Standard measuring range up to 300 mm FAQ What interface does the caliper use for data transfer? The Microtech Metrology internal digital caliper (SKU 141210300) provides a USB data output for direct connection to PCs or data-loggers. What resolution and accuracy can be expected? The caliper reads in 0.01 mm steps with an indicated accuracy of ±0.05 mm, suitable for standard workshop quality control. Which measurement tasks is this caliper intended for? It is designed for internal dimensioning tasks and covers a measuring range from 22 to 300 mm, matching the Standard class typically used in metalworking and toolroom environments. Is the instrument suitable for shop-floor use? Yes; the IP54 splash-resistant housing and robust digital readout make it appropriate for routine measurements in production and maintenance settings. Can the caliper be integrated into a digital quality workflow? The built-in USB output allows direct export of measurement data to software systems, enabling centralised logging and faster process feedback. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Internal Digital Caliper Swiss Digit Display 0.01mm Resolution IP67 Wireless - Microtech Metrology
Take advantage of precise internal measurement, robust IP67 protection and wireless data transfer for reliable inspection results. The combination of clear digital readout and a 22–300 mm measuring range supports efficient quality control workflows. Order the instrument directly via Metav Werkzeuge or consult our specialists for integration advice. Internal digital caliper by Microtech Metrology — wireless data, IP67 The internal digital caliper delivers precise inside-diameter measurements across a standard workshop range, combining a large Swiss Digit display with wireless data output for straightforward integration into inspection routines. Wireless data output for seamless data transfer IP67 dust and water protection Swiss Digit 11 mm digital display for clear readout Measuring range 22–300 mm, industrial standard Clear, shop-floor readable measurements that speed inspection The caliper uses a Swiss Digit display with an 11 mm character height, making readings visible under workshop lighting without slowing throughput. With a display resolution of 0.01 mm and an indicated accuracy of ±0.05 mm, the instrument balances fine measurement granularity with the robustness expected in production environments. This means small internal bores and mid-sized bores can be inspected reliably, while the numeric clarity reduces transcription errors during manual logging or visual checks. Reliable data transfer for traceable measurement workflows Equipped with wireless data output, the instrument enables digital capture of measurement values directly into SPC systems or inspection software without manual entry. Wireless transfer reduces transcription errors and accelerates batch documentation, which supports tighter process control and faster decision making. The device’s IP67 protection ensures that occasional coolant splashes or dusty conditions do not jeopardise signal integrity, so measurement data remains consistent across shifts and working conditions. Built for everyday workshop use across a standard measuring range The instrument covers a 22–300 mm measuring span, placing it in the standard caliper class ideal for general machine‑shop and metal‑working applications. That range offers a practical compromise between reach and stiffness, allowing reliable internal measurements on components such as housings, bearing seats and medium-sized fittings. The internal jaws are arranged for reproducible inside-diameter contact, and the combination of robust protection and a clear display reduces downtime for routine quality checks. For reliable internal measurements with wireless data transfer and IP67 protection choose Microtech Metrology's internal digital caliper — contact Metav Werkzeuge in Emmerich for purchasing advice and delivery at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 141210304 GTIN: 4061905457807 Manufacturer: Microtech Metrology Numbers / Core technical data Measuring range: 22–300 mm Resolution (display): 0.01 mm Indicated accuracy: ±0.05 mm Digital display height: 11 mm Special features Digital caliper for internal measurements Wireless data output IP67-rated protection Swiss Digit display FAQ What measuring range does the instrument cover? The internal digital caliper covers a measuring span of 22–300 mm, suitable for small to medium internal diameters in general workshop use. How precise is the measurement? Measurement resolution is 0.01 mm with an indicated accuracy of ±0.05 mm as specified for the device. Can measurement data be transferred electronically? Yes, the caliper features wireless data output for direct transfer to inspection software or data-collection systems. Is the instrument suitable for use at the machine bench? The IP67 rating protects against dust and temporary immersion, making the instrument suitable for the shop-floor environment. Which types of measurements are possible with this caliper? The instrument is designed primarily for internal diameter measurements and delivers reproducible readings for inspection tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Pocket Caliper 0.02mm Monoblock Matt Chrome, Pocket Size, Four-Function Measurement, Locking Screw, Plastic Case - Metav IndustryLine
Compact pocket format and robust monoblock construction combine for reliable workshop measuring with fine resolution and secure locking. Benefit from a clear 0.02 mm graduation and four measuring functions for versatile use. Order the caliper directly via Metav Werkzeuge or ask our consultants if needed. Pocket caliper M201.055 — 300 mm range, 0.02 mm graduation, Metav IndustryLine Pocket caliper M201.055 provides compact, workshop-ready measuring for routine and precision tasks in metalworking and general engineering. Pocket caliper, 300 mm range 0.02 mm graduation for fine measurements Monoblock, matt chrome finish Locking screw for stable readings Compact precision for everyday workshop tasks The pocket caliper is designed as a compact, sturdy measuring tool for the common needs of a machine shop or service bench. With a measuring range of 0–300 mm it fits the Standard class of calipers, offering the best balance of reach and stiffness for typical components. The matt chrome surface reduces reflections and wear, while the monoblock construction maintains alignment under regular handling. As an analogue instrument with a vernier scale, it delivers tactile feedback and straightforward readings that are familiar to experienced machinists. Versatile four‑function measuring saves time and reduces tool changes Equipped for internal, external, depth and step measurements, the instrument supports the four primary caliper tasks without swapping tools. This four-measurement capability shortens inspection cycles and reduces the risk of handling errors. The vernier format complements these functions by offering an intuitive, mechanical readout; practitioners benefit from immediate results without dependence on batteries or electronics. Reliable conformity and secure reading for production use Constructed from stainless steel with a matt chrome finish, the caliper conforms to DIN 862 for vernier calipers and includes a positive locking screw to hold jaws steady during transfer or marking. A thread table on the reverse side extends functionality for fast reference. The robust build supports repeated use on the shop floor while preserving measurement consistency, making the tool suitable for everyday quality checks and assembly tasks where dependable readings matter. Clear measurement language for mixed-experience teams The analogue scale simplifies training: apprentices learn mechanical measurement fundamentals while experienced technicians appreciate the direct feel of the vernier. The instrument’s 0.02 mm graduation suits workshop tolerances and routine quality control; when finer laboratory precision is required, separate high-precision instruments are recommended. For straightforward component checks, jigs and fixtures or incoming inspection, this caliper reduces downtime and streamlines routine verification. For specification advice or to secure the Metav IndustryLine pocket caliper M201.055 for the workshop, contact Metav Werkzeuge in Emmerich or consult our technical team for application matching Technical data Article number: M201.055 GTIN: 4054469100401 Tariff number: 90173000 Brand: Metav IndustryLine Label: Taschen-Messschieber 300x0,02mm mattverchromt, Monoblock, 0,35 kg Facts Measuring range: 0–300 mm Graduation / resolution: 0.02 mm Scale type: analogue vernier Standard: DIN 862 Four-function measuring capability Special features Material: stainless steel (inox) Finish: matt chrome Monoblock design Locking screw present Thread table on reverse side Internal, external, depth and step measurements (four-measurement) FAQ What measuring range does the caliper cover? The pocket caliper M201.055 covers a measuring range of 0–300 mm, suitable for standard workshop and machine‑shop tasks. What is the smallest division on the scale? The instrument provides a 0.02 mm graduation on an analogue vernier scale for fine workshop measurements. Which measurement types are possible with this caliper? Internal, external, depth and step measurements are all supported by the four‑function design of the Metav IndustryLine caliper M201.055. Is the caliper suitable for shop-floor use? Yes. The stainless steel construction, matt chrome finish and locking screw make the caliper robust and reliable for regular workshop inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Pocket Caliper 0.05mm Resolution Monoblock Matt Chrome, Monoblock, Four-Function Measurement, DIN 862, Supplied in Case - Metav IndustryLine
Combine the 300 mm measuring range, familiar analogue vernier reading to 0.05 mm, and robust matt‑chromed stainless construction for dependable shop measurements; order the instrument directly via Metav Werkzeuge or consult our advisors for application advice. M201.053 Pocket Caliper — 300 mm vernier, 0.05 mm resolution (Metav IndustryLine) The M201.053 pocket caliper is a compact, analogue measuring instrument designed for standard workshop tasks up to 300 mm; it combines a matt‑chrome monoblock frame with vernier scales for practical, repeatable dimensional checks. Compact 300 mm pocket format Vernier resolution 0.05 mm Matt chrome monoblock stainless frame Includes protective transport case Precise, reliable measurements for everyday workshop use This analogue caliper is classified in the Standard range (measuring capacity up to 300 mm), which offers the best compromise between reach and stiffness for general machine and metalworking tasks. The vernier layout provides a readable 0.05 mm resolution, supporting precise checks without electronic dependence. Compliance with DIN 862 underlines suitability for routine quality control; thanks to the four‑way measurement capability — inside, outside, depth and step — the instrument covers the essential measurement tasks encountered on the shop floor. Robust, compact construction for portable use The instrument features a monoblock frame finished in matt chrome over stainless steel, delivering corrosion resistance and long service life in demanding environments. A locking or fixing screw secures the slider for stable readings during transfer or marking. The pocket‑sized form factor and the supplied protective case simplify transport and storage, making the caliper a practical companion for mobile inspection rounds or bench work where space is limited. Simple analogue operation and practical handling Reading the vernier is straightforward: note the main scale reading, then add the vernier line that aligns with the main scale for the fractional step. The caliper provides vernier scales in both systems (top: 1/128", bottom: 1/20–39 mm), which supports mixed‑unit workflows and quick checks without conversion tools. The mechanical design prioritises tactile feedback and reliability; this makes the tool especially handy where digital electronics are unnecessary or where robustness and immediate readability are preferred. The instrument from Metav IndustryLine is therefore well suited to workshop metrology, maintenance teams and quality inspectors who value dependable analogue measurement. Speak to Metav Werkzeuge for personalised measurement guidance and to specify the Metav IndustryLine pocket caliper M201.053 for consistent, shop‑ready precision. Technical Data Article number: M201.053 GTIN: 4054469100388 Standard: DIN 862 Facts Measuring range: 0–300 mm Resolution: 0.05 mm (vernier) Type: Analog vernier caliper Special features Material: stainless steel Finish: matt chrome monoblock frame Vernier scales: top 1/128" and bottom 1/20–39 mm Fixing screw Four‑way measurement: inside, outside, depth, step Delivered in protective case FAQ What is the intended application for this caliper? This pocket caliper M201.053 from Metav IndustryLine is intended for standard machine‑shop and metalworking measurements where a 0–300 mm range and robust analogue operation are required. Which measurement functions are available on the instrument? The caliper supports four‑way measurement — external, internal, depth and step — enabling versatile checks without changing tools. How accurate is the vernier and how is it read? The vernier provides a 0.05 mm resolution; read the main scale first, then add the vernier line that aligns with the main scale for the fractional value. The instrument includes both inch and metric vernier scales for mixed‑unit use. Is the caliper corrosion‑resistant? The matt chrome finish over a stainless steel monoblock frame gives effective resistance against corrosion and wear in workshop conditions. Is a calibration certificate included with the caliper? The M201.053 is supplied as a standard workshop instrument; an ISO 17025 calibration certificate is not included unless explicitly stated for a specific delivery. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Pocket Precision Caliper 0.05mm Resolution, Locking, Fine Adjustment, Matt Chrome Finish - Metav IndustryLine
Take advantage of a compact 0–300 mm measuring range combined with a vernier resolution of 0.05 mm and a practical fine-adjustment mechanism for reliable workshop checks; order the Pocket caliper M201.024 directly via Metav Werkzeuge or ask our consultants if needed. Pocket caliper M201.024 — pocket caliper with vernier and fine adjustment, Metav IndustryLine The Pocket caliper M201.024 is a compact analogue measuring instrument for everyday workshop and field use, offering precise linear measurements, a depth probe and a locking device for repeatable results. Compact 0–300 mm measuring range Vernier scale with 0.05 mm resolution Fine adjustment and locking screw Matte chrome finish on tool steel construction Precision where it counts for routine inspection Built around a classic vernier layout, this analogue caliper delivers 0.05 mm incremental readings that match the industrial standard for mechanical verniers. The dual-scale vernier arrangement provides fine resolution for external and internal measurements, while the integrated fine adjustment allows controlled approach to the measuring faces, reducing overshoot and measurement scatter. As a result, routine dimensional checks benefit from stable readings without the need for batteries or electronic components, ensuring dependable operation across shift changes and on-site inspections. Robust design for workshop and mobile use The main profile is manufactured from tool steel and finished with a matte chrome plating that reduces glare and improves resistance to everyday wear. A dedicated locking screw secures the jaw position for transport or transfer of dimensions, and the built-in depth gauge extends the instrument’s usefulness beyond simple jaw-to-jaw measurements. Together, these design choices create a tool that copes with the practical demands of metalworking, maintenance and field service, combining low maintenance with tangible durability. Measurement modes and handling benefits This caliper covers external, internal and depth measurements with one compact instrument, and the vernier layout is optimised for quick visual readings in standard workshop conditions. The instrument’s classification within the Standard (100–300 mm) range strikes a balance between reach and stiffness, making it suitable for general machine‑shop tasks such as component checks, assembly control and routine quality assurance. The absence of electronics simplifies handling and long-term storage, while the fine-adjustment feature supports precise alignment when measuring small features or close tolerances. Contact Metav Werkzeuge GmbH in Emmerich for tailored advice on workshop integration or to arrange purchase directly from our European warehouse, Metav Werkzeuge is ready to assist with specifications and delivery options. Technical Data Article number: M201.024 GTIN: 4054469100197 TARIC/HS code: 90173000 Manufacturer: Metav IndustryLine Facts Measuring range: 0–300 mm Resolution: 0.05 mm (vernier) Analogue instrument: vernier type Dual vernier configuration for fine readings Special features Material: tool steel Finish: matte chrome plating Fine adjustment (feineinstellung) Locking screw for repeatability Depth gauge included Standard class (100–300 mm) Pocket caliper design, analogue operation Suitable for workshop and field measurements FAQ How accurate is the M201.024 pocket caliper for routine workshop checks? The M201.024 pocket caliper provides 0.05 mm vernier resolution, matching the common industrial analogue standard for mechanical calipers and making it suitable for everyday dimensional control in metalworking. Which measurement functions does this caliper support? The instrument covers external, internal and depth measurements via its jaws and integrated depth probe; the fine-adjustment and locking screw aid reproducible setting transfer with the M201.024 pocket caliper. What materials and finish are used on the caliper? The caliper is constructed from tool steel with a matte chrome finish to improve durability and reduce reflections during measurement tasks. Is the caliper suitable for mobile or field use? Yes — the compact pocket form factor, locking screw and analogue vernier format make this caliper practical for on-site and mobile inspection without reliance on batteries. Can the vernier be read quickly in workshop lighting? The dual vernier layout and matt finish are chosen to enhance contrast and legibility under typical workshop lighting conditions, supporting faster and more reliable readings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Pocket Vernier Caliper 0.05mm Resolution Matt Chrome Stainless Steel Monoblock, Moment Lock, Depth Rod, Four-Point Measurement, DIN 862 - Metav IndustryLine
Take advantage of precision, robust Monoblock construction and repeatable measuring pressure for reliable workshop measurements; order the Pocket Vernier Caliper TOP 300 x 0.05 mm directly via Metav Werkzeuge or request advice from our consultants for specification matching. Pocket Vernier Caliper TOP 300 x 0.05 mm (Analogue, Monoblock) The Pocket Vernier Caliper TOP 300 x 0.05 mm is a compact, stainless‑steel analogue caliper designed for standard workshop and metalworking measurement tasks where portability and repeatable results are required. Pocket format, 300 mm measuring range Vernier resolution 0.05 mm, DIN 862 Moment locking for consistent measuring pressure Monoblock stainless steel, matt chrome finish Reliable range and repeatability for everyday workshop use This caliper covers a 0–300 mm measuring range, which places it in the workshop standard category: the best compromise between reach, stiffness and one‑hand operation. The mechanical vernier offers a resolution of 0.05 mm in accordance with DIN 862, providing an industry‑recognised baseline for routine quality control and machining tasks. The hardened stainless steel construction with a matt‑chrome finish reduces surface wear and keeps the scale legible over prolonged use, supporting consistent, traceable measurements across production runs. Consistent measuring pressure and four measurement modes A defining functional advantage is the moment locking mechanism that secures the slider at a defined clamping torque. This reduces variation caused by different operator pressure and improves reproducibility when comparing multiple parts. The instrument supports four‑way measurement — outside, inside, depth and step — and the calibrated depth probe extends the tool’s usefulness beyond simple gap checks. For repetitive tasks this translates into fewer re‑measurements and lower process variability. Robust design and practical handling details The monoblock body increases torsional stiffness for reliable readings over the full 300 mm span while keeping the unit compact enough for mobile use. A clear vernier arrangement (upper scale 1/128", lower scale 1/20–39 mm) provides traditional analogue readability without reliance on electronics, which suits environments where robustness and simplicity are priorities. Additional practical features include a thread table printed on the reverse side and a beak geometry (60/25 mm) that balances reach and accessibility for small features. Workshop integration and quality assurance Delivered with a transport case for secure handling and storage, this caliper is ready for immediate use in machine shops, toolrooms and inspection benches. The hardened measuring surfaces and matt finish minimise wear, helping the instrument retain its calibration over time. For organisations seeking traceability, the product specification, material and conformity to DIN 862 provide a clear basis for integration into inspection routines and production control. For dependable, compact precision with Monoblock stability, contact Metav Werkzeuge for purchasing guidance or to arrange prompt delivery from Emmerich. Technical Data SKU: M201.078 GTIN: 4054469100500 Label: Taschen‑Messschieber TOP 300x0,05mm Momentverstellungf. mattverchromt, INOX, Monoblock Facts Measuring range: 0–300 mm Resolution: 0.05 mm Weight: 0.36 kg Beak length: 60/25 mm Standard: DIN 862 Special features Material: stainless steel, matt chrome, fully hardened Moment locking for repeatable clamping pressure Monoblock construction for increased stiffness Vernier scales: 1/128" upper, 1/20–39 mm lower Four‑way measurement: outside, inside, depth, step Thread chart on the reverse side Delivered in a transport case Analogue vernier instrument FAQ Is this caliper suitable for general machine‑shop work? The Pocket Vernier Caliper TOP 300 x 0.05 mm is designed for standard machine‑shop and metalworking tasks; its 0–300 mm range and DIN 862 conformity make it a universal everyday instrument. Does the caliper offer consistent results between operators? Yes, the moment locking feature on the TOP 300 x 0.05 mm secures slider pressure to reduce operator‑dependent variation and improve repeatability. What measurement types can be performed with this instrument? The caliper supports outside, inside, depth and step measurements; the depth probe and beak geometry extend its practical use for multiple inspection tasks. Is the measuring surface protected against wear? The hardened stainless steel construction with a matt‑chrome finish provides durable measuring faces that resist wear and help maintain scale legibility. Is a case included for storage and transport? A transport case is supplied with the instrument to protect the caliper in transit and during storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper 0.02mm Resolution Monoblock Matt Chrome, Moment Lock, Depth Rod, Four-Point Measurement - Metav IndustryLine
Take advantage of precise 0–300 mm measurement capability, a 0.02 mm vernier resolution and a robust monoblock stainless‑steel build for reliable workshop checks; order the caliper directly via Metav Werkzeuge or consult our technical advisors if specification clarification is required. M201.056 Pocket Caliper — 0–300 mm, 0.02 mm vernier (Metav IndustryLine) The M201.056 is a pocket caliper designed for everyday workshop control and fine mechanical work, combining a compact format with a matt chrome‑plated monoblock construction and a repeatable moment lock. Compact pocket caliper design Resolution 0.02 mm for precise readings Moment lock for repeatable clamping Supplied in protective case Precision where it counts The instrument delivers a 0–300 mm measuring range with a 0.02 mm vernier graduation, placing it in the Standard caliper class (100–300 mm) ideal for most machine‑shop and metalworking tasks. The analogue vernier adheres to DIN 862, providing a clear mechanical readout and a reliable tolerance band for routine quality control. The measured values are immediately usable for incoming inspections and production checks, while the mechanical vernier avoids battery dependency and offers tactile confirmation during adjustment. Designed for compact workshops and mobile use The pocket format and matt chrome finish reduce reflection and make the tool convenient to carry between benches or on the shop floor. The monoblock construction increases torsional rigidity, so measurements remain stable even when used single‑handed. The compact jaw geometry also supports measurements in tighter assemblies, and the short external‑jaw length offers improved access for small parts while preserving stiffness for repeatable results. Built for repeatability and practical handling A dedicated moment lock secures the slider at a consistent clamping torque, removing variation caused by manual overtightening and improving reproducibility across repeated checks. The caliper supports four‑way measurement — external, internal, depth and step — making it versatile for fixtures, housings and small components. A thread table on the reverse side provides a quick reference for common thread pitches during assembly or inspection tasks. Small details that save time in production Practical features include clearly graduated jaws (60/25 mm spec for jaw lengths) and a protective case for transport and storage, ensuring the instrument stays serviceable between uses. The analogue design means immediate operation without setup, and compliance with workshop standards ensures compatibility with existing inspection routines. The combination of robust stainless construction and straightforward mechanical reading reduces downtime and maintenance complexity. For precise, reliable workshop measurement consult Metav Werkzeuge and secure the Metav IndustryLine M201.056 pocket caliper with technical guidance tailored to production needs — contact our advisors in Emmerich for specification support and delivery arrangements Technical Data Article number: M201.056 GTIN: 4054469100418 Brand: Metav IndustryLine Label: Pocket caliper 0–300 mm, 0.02 mm, moment lock Category: Calipers Facts Measuring range: 0–300 mm Resolution / vernier graduation: 0.02 mm Jaw lengths: 60 / 25 mm Tariff number: 90173000 Standard: DIN 862 Special features Moment locking mechanism Monoblock stainless‑steel construction Matt chrome plating Four‑fold measurement: external, internal, depth, step Thread table on reverse side Supplied in protective case Analogue vernier design (no battery) FAQ What measuring range and resolution does this caliper offer? The Metav IndustryLine M201.056 pocket caliper offers a measuring range of 0–300 mm with a vernier graduation of 0.02 mm, suitable for standard workshop inspection tasks. Is the caliper suitable for internal and depth measurements? Yes, the instrument provides four‑way measurement capability — external, internal, depth and step — making it adaptable to a range of workshop applications. How does the moment lock improve measurement consistency? The moment lock on the M201.056 fixes the slider at a controlled clamping torque, preventing measurement variation caused by differing hand pressure and improving repeatability. Does the caliper conform to recognised standards? The caliper is manufactured in accordance with DIN 862, offering a familiar mechanical reading method for quality control procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper 0.05mm Resolution Monoblock, Moment Lock, Four-Function Measurement, Matt Chrome Case - Metav IndustryLine
Take advantage of a compact, workshop-ready design that combines reliable 0.05 mm resolution, robust stainless steel monoblock construction, and a repeatable moment locking mechanism for consistent clamping. Order directly via Metav Werkzeuge or consult the Metav team for application advice and availability. M201.054 Pocket Caliper — 0–300 mm, 0.05 mm, Metav IndustryLine M201.054 is a pocket-sized precision caliper designed for everyday metrology tasks in the workshop and quality-control bench, offering durable stainless-steel construction and an analog nonius for quick, reliable readings. Pocket caliper 0–300 mm, scale 0.05 mm Monoblock stainless steel construction Moment locking for repeatable clamping Four-function measurement: int./ext./depth/step Consistent precision for routine inspection and production control This pocket caliper delivers industrial-grade precision with a reading increment of 0.05 mm, matching the common workshop standard for reliable tolerance checks. The analogue nonius provides a direct visual measurement method that is easy to interpret for trained personnel, while the moment locking mechanism stabilises the jaw position for repeatable measurements. Together, these features reduce measurement scatter and help maintain consistent part quality during batch inspections, making the tool a pragmatic addition to both machine shops and service benches. Durable design that copes with daily handling Engineered as a monoblock instrument in stainless steel with a matte-chrome finish, this caliper resists corrosion and stands up to frequent handling. The compact footprint and pocket form factor suit technicians who move between machines or job sites, while the solid construction keeps the scale alignment stable over time. The combination of robust materials and straightforward mechanics lowers downtime and maintenance effort, supporting efficient workflows in busy production environments. Four measurement functions for versatile workshop tasks Equipped for outside, inside, depth and step measurements, the caliper offers practical versatility on a single tool. The integrated depth gauge extends measurement capability to recesses and bores, while the step measurement geometry enables fast checks of shoulders and offsets. This multi-function approach reduces tool changes and speeds up process checks, providing clear time-savings during set-up and troubleshooting without sacrificing measurement reliability. Proven standards and readable scaling for everyday use Designed to DIN 862, the instrument follows recognised workshop tolerances and handling conventions, simplifying documentation and inspection reporting. The analogue scale includes a dual nonius arrangement for fine graduations, allowing millimetre and inch-related cross-checks where needed. For users accustomed to digital readouts, the tactile feedback and immediate legibility of the nonius often improve reading discipline and reduce misinterpretation during quick checks at the machine. Contact Metav Werkzeuge for stock status, technical clarification and ordering for the M201.054 pocket caliper — local supply from Emmerich with practical delivery options and expert advice Technical data Article number: M201.054 GTIN: 4054469100395 ECLASS: 21170344 Customs tariff number: 90173000 Standard: DIN 862 Core specifications Measuring range: 0–300 mm Resolution: 0.05 mm Nonius: 1/128" (top); 1/20–39 mm (bottom) Jaw lengths: 60 / 25 mm Four-function measurement: inside, outside, depth, step Special features Material: stainless steel (inox) Construction: monoblock design Finish: matte chrome Mechanism: moment locking for repeatable clamping Scale type: analogue nonius Accessories: thread table printed on reverse side FAQ How precise is the M201.054 pocket caliper for routine inspections? The M201.054 pocket caliper provides a reading increment of 0.05 mm, which corresponds to the typical industrial analogue standard for reliable workshop measurements under DIN 862. Can the caliper measure depth and steps as well as external dimensions? Yes, the instrument supports four-function measurement: external, internal, depth and step measurements, enabled by the integrated depth gauge and step geometry. Is the caliper suitable for portable use on the shop floor? The stainless-steel monoblock design and compact pocket form make this caliper robust for portable shop-floor use while maintaining scale stability during routine handling. Does the caliper include a locking device for repeatable readings? The tool features a moment locking mechanism that ensures stable jaw clamping and helps to achieve repeatable measurements across multiple parts. What standard does the caliper conform to and how is the scale arranged? The caliper is manufactured to DIN 862 and uses an analogue nonius with both millimetre and inch-related graduations for straightforward cross-referencing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper Digital 0.005mm Readout 9mm Display IP67 ISO 17025 Calibrated - Microtech Metrology
Benefit from high-resolution measurement, robust IP67 protection and a full ISO 17025 calibration certificate for traceable results — order the Microtech Metrology precision caliper directly via Metav Werkzeuge or contact our consultants for detailed application advice. Precision Caliper – Digital caliper with 0–300 mm range and IP67 protection (Microtech Metrology) Precision Caliper is a workshop and quality-control instrument for dimensional inspection across standard machine‑shop applications, offering a rugged, digitally readable solution for repeatable measurements. 0–300 mm standard measuring range Resolution 0.005 mm for fine readings IP67 protection for workshop conditions ISO 17025 calibration certificate included Traceable accuracy for quality assurance The caliper delivers 0.005 mm resolution combined with an overall accuracy of ±0.03 mm, matching expectations for a standard 0–300 mm measuring class. This balance of fine resolution and predictable tolerance supports formal quality control and process documentation. The instrument is supplied with an ISO 17025 calibration certificate, which ensures traceability of results and simplifies acceptance into inspection routines. Such documented calibration reduces audit effort and integrates the gauge directly into existing measuring procedures. Built to withstand workshop environments A sealed housing rated IP67 protects the electronics against dust and temporary immersion, reducing downtime from contamination or coolant exposure. The sizeable 9 mm display improves legibility on the shop floor, while the robust construction and tactile slider deliver a durable feel during repetitive use. These characteristics make the gauge suitable for production benches where resilience and clear readout are required for fast decision-making and repeatable checks over many cycles. Precision contact and handling for reliable readings Handmade measuring jaws provide a fine contact surface and consistent seating on measured parts, which helps to reduce contact-related variation. The integrated depth gauge extends utility beyond simple outside measurements, enabling depth and step checks without additional tools. Together, these features support accurate, multi-purpose measuring tasks in a compact format that remains easy to handle and calibrate within a workshop environment. Practical advantages for machine shops and inspection Classified in the Standard (100–300 mm) category, the instrument is optimised for everyday use in metalworking and general mechanical engineering. The combination of fine resolution, protective enclosure and certified calibration makes it a practical choice for component inspection, incoming material checks and first-off verification. The instrument’s digital interface accelerates readout while limiting transcription errors, contributing to faster throughput and improved process reliability. Discuss specification and calibration options with Metav Werkzeuge: contact our Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability and delivery of the Microtech Metrology digital precision caliper (SKU 141085312) Technical Data Article number: 141085312 GTIN: 4061905038242 Brand: Microtech Metrology Product type: Digital precision caliper Measuring range: 0–300 mm Facts Resolution: 0.005 mm Accuracy: ±0.03 mm Display height: 9 mm Protection class: IP67 Calibration: ISO 17025 certificate included Special features Handmade measuring jaws Integrated depth gauge Standard class instrument for 0–300 mm measurements Robust housing suitable for workshop use FAQ Is the caliper delivered calibrated? Yes. The Microtech Metrology precision caliper (SKU 141085312) is delivered with a full ISO 17025 calibration certificate, enabling immediate use in traceable inspection tasks. What level of protection does the instrument provide against dust and liquids? The device is rated IP67, which protects the electronics from dust ingress and temporary immersion, making it suitable for typical workshop conditions. Can the caliper measure depth and steps as well as outside dimensions? Yes. The instrument includes an integrated depth gauge and is suitable for outside, inside and depth measurements in standard inspection workflows. Is the displayed resolution the same as the measurement accuracy? No. The display resolution is 0.005 mm, while the overall measurement accuracy for the 0–300 mm range is ±0.03 mm; the resolution improves readability, the accuracy defines tolerance to be expected. Who is this caliper aimed at? The caliper is aimed at machine shops, maintenance departments and quality-control labs that require a robust, digitally readable measuring instrument with certified calibration for process control. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Digital 0.01mm Resolution, Force Control 8N, IP67, ISO 17025 Calibrated - Microtech Metrology
Consistent measurement force, robust ingress protection and traceable calibration combine to deliver reproducible workshop results. The device pairs an 8 N bidirectional measuring force with a clear Swiss Digital readout and an ISO 17025 calibration certificate for documented quality assurance. Order the Precision Caliper directly via Metav Werkzeuge or ask consultants if needed. Precision Caliper – Digital caliper, 0–300 mm, ISO 17025 (Microtech Metrology) Precision Caliper with bidirectional 8 N measuring force, Swiss Digital display and IP67 rating for workshop and laboratory use ISO 17025 calibration with certificate IP67 water and dust protection 0–300 mm measuring range (standard) Swiss Digital display, 11 mm height Traceable calibration for verifiable results The instrument is supplied fully calibrated to ISO 17025 and includes a calibration certificate, which documents measurement traceability and supports quality audits. This level of verification is particularly relevant for service shops and quality departments that require documented proof of conformity. With the certificate, records for incoming inspection or production control are straightforward to compile and present. Reproducible measurements through controlled contact force A bidirectional 8 N measuring force with integrated force control reduces variation caused by differing operator pressure and improves repeatability on serial checks. The controlled contact ensures that thin-walled components and delicate surfaces are measured without deformation, while still providing a consistent tactile feedback for manual operation. This results in fewer re-measures and a faster throughput in inspection routines. Designed for the shop floor: robust, readable and practical Rated IP67, the caliper resists dust ingress and temporary immersion, making it suitable for harsher workshop environments as well as clean laboratory benches. The Swiss Digital display with 11 mm high digits offers clear legibility at a glance, and the instrument’s resolution of 0.01 mm enables standard fine measurements across the full 0–300 mm span. Hardened measuring faces contribute to long service life and stable contact geometry under frequent use, so the tool maintains its performance over time. Practical handling and workplace efficiency The combination of compact ergonomics and dedicated jaw geometry (jaw lengths 60/21 mm) supports both external and internal measurements without changing tools. The instrument’s classification as a standard-range caliper makes it a versatile choice for general machine‑shop tasks: it balances reach, stiffness and single‑hand operation for rapid checks on assemblies, fixtures and components. Integration into regular quality workflows is therefore straightforward, with less downtime for measurement changeovers. For traceable workshop measurement, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to arrange supply and technical advice for the Microtech Metrology precision caliper calibrated to ISO 17025 Technical Data Article number: 141078322C GTIN: 4061905036682 Brand: Microtech Metrology Display: Swiss Digital, height 11 mm Protection rating: IP 67 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Measuring force: 8 N Jaw length: 60/21 mm Special features ISO 17025 calibration with certificate Hardened measuring faces Digital caliper design IP67 protection FAQ What calibration documentation is supplied with the caliper? The caliper is delivered with an ISO 17025 calibration certificate, documenting traceability and measurement results for audit and quality records. What accuracy can be expected across the 0–300 mm range? With a display resolution of 0.01 mm and standard digital-caliper tolerances for this range, the device provides stable readings suitable for workshop quality control and inspection routines. How does the 8 N measuring force benefit repetitive checks? A consistent 8 N contact force reduces operator-induced variation and improves repeatability during serial measurements, making results more reliable across multiple operators. Is the caliper suitable for use in a production environment? Yes — the IP67 rating and hardened measuring faces make the instrument robust enough for typical shop-floor conditions while maintaining precise measurement capability. Which measurement tasks does the jaw length support? The jaw geometry (60/21 mm) is designed to handle both external and internal measurements efficiently, reducing the need to switch instruments for common inspection tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Digital Display 0.01mm Resolution Force-Control 8N, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of traceable ISO 17025 calibration, a robust IP67 protection rating and a clear Swiss Digital readout to ensure reliable, repeatable measurements in production and quality control. Order the caliper directly through Metav Werkzeuge or consult the Metav team for technical advice. Precision Caliper 0–300 mm by Microtech Metrology — Digital, IP67 The Precision Caliper from Microtech Metrology is a digitally read measuring instrument for workshop and laboratory use, combining robust ingress protection with high-resolution readout for standard industrial measurement tasks. ISO 17025 calibrated with certificate Swiss Digital display, 11 mm height IP67 protection for workshop use 0–300 mm measuring range, 0.01 mm resolution Traceable accuracy for dependable quality control The caliper delivers measurable benefits through its calibrated status: supplied with an ISO 17025 calibration certificate, the instrument ensures laboratory-grade traceability that supports internal audits and external quality checks. With a 0–300 mm measuring range and a display resolution of 0.01 mm, it suits the typical needs of machine shops and standard quality-control stations. The combination of certified calibration and fine resolution reduces uncertainty in pass/fail decisions and simplifies documentation of measurement processes. Robust design that endures workshop conditions Protected to IP67, the instrument resists dust ingress and temporary immersion, improving uptime in harsher production environments. The sealed electronics paired with a sturdy gauge construction make the caliper a practical choice where coolant splash, dust or intermittent wetting occur. The specified 8 N measuring force, applied in both directions, helps to standardise contact pressure and minimise operator-induced variation, which in turn enhances reproducibility across repeated measurements. Clear digital readout and ergonomic handling A Swiss Digital display with an 11 mm character height provides quick legibility on the shop floor, speeding up inspection cycles and reducing transcription errors. The digital interface, offering a standard 0.01 mm step, supports fast readings and straightforward transfer into inspection logs. The jaw geometry (60/21 mm) is designed to assist stable contact on small and medium components, making the instrument efficient for internal, external and step measurements common in day-to-day metrology work. Designed for the workshop — versatile applications Classified as a Standard-range caliper, this unit covers the most common measurement tasks in metalworking, fabrication and general engineering where a balance of reach and stiffness is required. Its combination of certified calibration, water and dust resistance, and a pronounced digital display positions it as a reliable tool for incoming inspection, routine quality checks and assembly control. The documented calibration and rugged protection also support traceability demands in regulated industries. For traceable accuracy from Microtech Metrology, contact Metav Werkzeuge in Emmerich for purchasing and technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 141078322 GTIN: 4061905036606 Brand: Microtech Metrology Display: Swiss Digital, height 11 mm Facts Measuring range: 0–300 mm Resolution: 0.01 mm Measuring force: 8 N Protection class: IP67 Special features Digital caliper, bi-directional measuring force Delivered calibrated to ISO 17025 with certificate Jaw length: 60/21 mm FAQ Is the caliper supplied with a calibration certificate? Yes. The Precision Caliper from Microtech Metrology is delivered with an ISO 17025 calibration certificate for traceable measurements. What measurement accuracy and resolution can be expected? The instrument provides a display resolution of 0.01 mm and is designed for standard workshop accuracy requirements across its 0–300 mm range. Can the caliper be used in damp or dusty environments? The caliper is rated IP67, offering protection against dust and temporary immersion, making it suitable for many workshop conditions. What does the 8 N measuring force mean in practice? An 8 N measuring force, applied in both directions, helps to standardise contact pressure and reduces variation from manual handling during measurement. Which measurement tasks is this caliper best suited for? As a Standard-range caliper, it is ideal for routine internal, external and step measurements in machine shops, assembly inspection and general quality-control workflows. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Digital Display 12.5mm Height Micro-USB, ISO 17025 Calibrated, Hardened Measuring Faces, Handmade Jaws - Microtech Metrology
Benefit from traceable measurement results thanks to ISO 17025 calibration, a clear digital display and a workshop‑proven 0–300 mm measuring range; order via Metav Werkzeuge or consult the technical team for application advice. Microtech Precision Digital Caliper (0–300 mm) — Digital display, ISO 17025 calibrated The Microtech Precision Digital Caliper (0–300 mm) is a calibrated workshop instrument for precise external, internal and depth measurements in production and quality control environments. ISO 17025 calibrated, certificate included Digital display, 12.5 mm high digits Measurement range 0–300 mm, workshop standard Micro‑USB data output and thumb roller Traceable precision for routine quality control The caliper combines a 0.01 mm reading with laboratory traceability, making it suitable for inspection stations and incoming‑goods checks where documentation matters. The delivery includes an ISO 17025 calibration and a calibration certificate, which provides the documented evidence needed for internal audits and supplier quality records. With this level of verification, the instrument supports consistent decision‑making in production planning and batch release procedures. Robust measuring geometry for repeatable results Hand‑finished jaws and hardened contact faces ensure dimensional stability over time; the hand-crafted measuring jaws and hardened measuring faces reduce wear and keep repeatability high in daily workshop use. The integrated depth gauge and smooth thumb roller permit controlled, single‑hand measurements on assemblies and machined components, reducing operator variation and improving throughput in repetitive tasks. Efficient data capture and clear readout A high‑contrast digital display (12.5 mm) improves legibility under workshop lighting, while the Micro‑USB output enables straightforward transfer of measured values into SPC spreadsheets or measuring software, cutting transcription errors and speeding up documentation. The electronic interface and robust readout simplify traceable data collection in serial production and small‑batch inspection, supporting faster cycle times and better process control. Designed for everyday workshop demands Classified in the standard range for calipers, the instrument's 0–300 mm span balances reach and rigidity for general engineering tasks — from component measurement to fixture set‑up. The combination of a compact, durable slider and precise electronics delivers a practical tool for metalworking, toolrooms and quality laboratories that require reliable, documented measurements without specialist training. For traceable precision backed by ISO 17025, request the Microtech precision caliper from Metav Werkzeuge in Emmerich or consult the technical team via info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 141083312C GTIN: 4061905200793 Manufacturer: Microtech Metrology Facts Measurement range: 0–300 mm Resolution / reading: 0.01 mm Digital display height: 12.5 mm Jaw length: 60/21 mm Special features ISO 17025 calibrated, certificate included Micro‑USB data output Hand‑crafted measuring jaws Hardened measuring faces Depth gauge integrated Thumb roller for controlled feed FAQ How is the caliper delivered with regard to calibration? The instrument is supplied fully calibrated to ISO 17025 standards and includes a calibration certificate for traceability. What measurement resolution can be expected from this digital caliper? This digital caliper provides a 0.01 mm reading, suitable for standard workshop metrology and quality checks. Can measurement data be exported electronically? Yes; the caliper features a Micro‑USB data output for direct transfer of values to data collection systems. Is the caliper suitable for general machine‑shop use? The 0–300 mm range places it in the standard category for everyday engineering tasks, balancing reach and stiffness for workshop inspection. Which design details improve long‑term repeatability? Hand‑crafted jaws and hardened measuring faces reduce wear and maintain contact geometry, supporting consistent measurements over extended use. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Digital Display 12.5mm Micro-USB ISO 17025 Calibrated, Hand-Finished Jaws - Microtech Metrology
Take advantage of fully traceable ISO 17025 calibration, a clear digital display with 0.01 mm resolution and reliable Micro‑USB data output to streamline quality checks; order directly via Metav Werkzeuge or consult our advisers for integration and delivery. Precision Caliper — Microtech Metrology, Digital 0–300 mm, ISO 17025-calibrated A precision caliper designed for workshop and quality-control tasks, combining a large digital readout with traceable calibration and robust, hand-finished measuring faces for repeatable results. Large 12.5 mm digital display ISO 17025-calibrated with certificate included Micro‑USB data output for measurement logging Hand-finished measuring jaws and depth gauge Faster, traceable measurements for production control The large digital display (12.5 mm) with 0.01 mm resolution reduces read-off errors and speeds up inspection routines, making process control more efficient. With a clear numerical readout and a robust slider, this digital measuring instrument supports rapid sequence checks and hand‑held sampling without sacrificing clarity. The Micro‑USB interface simplifies data transfer to spreadsheets or inspection software, which cuts manual transcription and reduces risk of entry mistakes — a practical benefit for shops that log results or run traceability protocols. Accuracy assured by certified calibration and workshop suitability Delivered complete with an ISO 17025 calibration certificate, the device arrives ready for use in formal quality workflows and internal audits. The 0–300 mm measurement range places the tool firmly in the standard range (0–300 mm) category, which is optimised for everyday mechanical and metalworking tasks — a balance of reach, stiffness and one‑hand handling that fits most bench and shop requirements. Hand‑finished jaws improve contact repeatability on mating surfaces, while the integrated depth gauge extends usefulness for stepped and recess features, providing reliable single‑tool inspection for many components. Built for integration and dependable workshop service Constructed for routine use, the caliper pairs practical ergonomics with data capability so measurement becomes part of the process rather than a separate chore. The combination of hand-finished jaws and calibrated electronics yields measurement results that can be trusted for pass/fail decisions and incoming inspection. Connectivity via Micro‑USB supports digital archiving, and the compact footprint suits busy benches and inspection stations. As a component in a pragmatic quality strategy, this caliper reduces rework and supports consistent output — helping to keep production on schedule. Discuss application details or booking from Metav Werkzeuge in Emmerich for quick delivery and professional advice on integration and calibration traceability Technical Data Article number: 141083312 GTIN: 4061905037986 Manufacturer: Microtech Metrology Core data Measurement range: 0–300 mm Display resolution: 0.01 mm Display height: 12.5 mm Jaw length: 60/21 mm Special features Digital display (12.5 mm) Micro‑USB data output ISO 17025 calibration with certificate included Hand-finished measuring jaws Integrated depth gauge Digital readout FAQ Is the caliper delivered with an official calibration certificate? Yes. The precision caliper from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes the calibration certificate. What is the measurement resolution and suitability for workshop QC? The instrument offers 0.01 mm resolution, suitable for standard machine‑shop quality control across the 0–300 mm range. Can measurement data be exported to inspection software? Yes. The device provides a Micro‑USB data output for straightforward transfer of readings into spreadsheets or measurement systems. Which measurements can be performed with this caliper? The caliper supports outside and inside measurements as well as depth checks, making it versatile for general inspection tasks. What is the article number for ordering or referencing? The SKU for this Microtech Metrology precision caliper is 141083312. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Digital Display 14mm Height Micro‑USB Output IP54, ISO 17025 Calibrated - Microtech Metrology
Taking advantage of ISO 17025 calibration, robust IP54 protection and reliable digital data transfer, this instrument combines traceable accuracy with practical workshop integration — order directly via Metav Werkzeuge or consult our specialists for application advice. Microtech Precision Caliper 0–300 mm — digital caliper with Micro‑USB and ISO 17025 calibration The Microtech Precision Caliper is a digital measuring instrument designed for workshop inspection and quality control, offering depth measurement and Micro‑USB data output for straightforward documentation and process integration. ISO 17025 calibration included 0.01 mm resolution, ±0.03 mm accuracy Micro‑USB data output for traceable records IP54 splash and dust protection Reliable measurement for everyday workshop use Built for the Standard range (0–300 mm), this digital instrument delivers a practical balance between reach and rigidity suited to metalworking and machine construction. With a display resolution of 0.01 mm and a stated accuracy of ±0.03 mm, repeatable results are achieved for standard inspection tasks; the numerical precision reduces interpretation errors common to analogue scales, and the 14 mm display ensures readings are visible under busy shopfloor lighting. Data capture and process integration made straightforward Equipped with Micro‑USB output and a clear digital readout, the caliper supports rapid logging of measurements into inspection routines and measurement software, eliminating transcription steps and saving time. The integrated depth measurement function and dual jaw geometry (approx. 60/20 mm) extend versatility to internal, external and depth checks, enabling a compact instrument to serve multiple control points within a production sequence. Calibrated traceability that supports quality systems Delivered with an ISO 17025 calibration and accompanying calibration certificate, the instrument is ready for use in documented quality processes and audits. IP54 protection helps maintain functionality in a production environment by guarding against dust and splashes, sustaining measurement confidence between calibration intervals and supporting consistent inspection outcomes. Practical benefits for workshop workflows The digital format, compact slider and pronounced digit height combine to reduce measurement time while improving ergonomics and readability. As a digitally enabled caliper, it supports streamlined documentation and fewer interruptions to the production flow, helping to maintain throughput without compromising on accuracy or traceability. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating this ISO 17025‑calibrated Microtech precision caliper into inspection routines; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 141083311 GTIN: 4061905455261 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display digit height: 14 mm Jaw lengths: 60/20 mm Protection class: IP54 Special features Digital display, Micro‑USB data output Depth measurement function included ISO 17025 calibration and calibration certificate included Suitable for workshop inspection and quality control FAQ Is the instrument supplied calibrated? Yes. The Microtech Precision Caliper is delivered with an ISO 17025 calibration and an accompanying calibration certificate. What level of accuracy can be expected with this caliper? The instrument offers a resolution of 0.01 mm and an accuracy of ±0.03 mm for the stated measuring range, suitable for standard workshop inspection tasks. Can measurement data be exported automatically? Yes. The caliper provides a Micro‑USB data output for direct transfer of readings to documentation systems. Does the caliper include a depth gauge? It does. The integrated depth measurement extends the caliper’s functionality beyond internal and external checks. Is the instrument protected for shopfloor use? The unit is rated IP54, offering resistance against dust ingress and splash water typical of production environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Digital Swiss Display 0.01mm Resolution IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of robust IP67 protection, ISO 17025 calibration and 0.03 mm accuracy for repeatable shop‑floor measurement. Order the Precision Caliper directly via Metav Werkzeuge or request technical advice from our consultants to ensure fit for purpose. Precision Caliper by Microtech Metrology — digital, IP67, ISO 17025 calibrated Precision Caliper is a digital measuring instrument for industrial workshops and quality control, designed for reliable 0–300 mm measurements with a clear Swiss Digital display Robust IP67 protection for workshop environments ISO 17025 calibrated with certificate included 0.03 mm accuracy for consistent quality control Swiss Digital display with 11 mm digit height Reliable shop‑floor performance that keeps production moving The Precision Caliper combines a 0–300 mm measuring range with industrial protection to offer a dependable everyday measuring tool for the workshop. The IP67 rating safeguards the electronics against dust and temporary immersion, reducing downtime from contamination. With a reading resolution of 0.01 mm and an accuracy of 0.03 mm, the instrument provides measurable improvement in process control compared with basic analogue calipers; this supports faster decision‑making in incoming inspection and routine checks. The Swiss Digital display with an 11 mm digit height enhances readability at a glance, helping to reduce transcription errors and speed up measurement cycles. Traceable calibration for documented quality assurance Calibration traceability is built into the delivery: the caliper is supplied with a full ISO 17025 calibration and a calibration certificate, enabling immediate use in documented quality systems. This formal certification simplifies audit preparation and supports ISO or industry‑specific quality processes by providing an evidence‑based measurement baseline. The integrated certification means the instrument can be incorporated into measurement protocols without additional external calibration steps, saving procurement time and aligning measurement data with internal control charts and acceptance criteria. Practical design for precise handling and repeatable results Ergonomic features such as dual jaws 60/40 mm and a compact slider design improve accessibility in confined or complex components while maintaining stiffness and stability. The combination of a robust construction and a clear display makes the caliper suitable for continuous workshop use: measurements are reproducible thanks to the stable jaw geometry and the instrument’s mechanical guidance. The digital readout reduces operator interpretation errors and the overall package focuses on precision and usability rather than added complexity, so technicians can integrate the caliper into daily inspection routines with minimal training. For purchasing advice or to discuss how this Microtech Metrology Precision Caliper fits specific production requirements, contact Metav Werkzeuge in Emmerich for tailored guidance and order processing. Technical data Article number: 141072323 GTIN: 4061905037269 Manufacturer: Microtech Metrology Numbers / Core technical data Measuring range: 0–300 mm Resolution / display reading: 0.01 mm Accuracy: ±0.03 mm Display digit height: 11 mm Jaw length: 60/40 mm Protection rating: IP67 ECLASS: 21170344 Design / Special features Digital precision caliper, IP67 Swiss Digital display ISO 17025 calibration included with certificate Dual measuring jaws 60/40 mm SKU: 141072323 FAQ Is the caliper delivered calibrated and ready for use? Yes. The Microtech Metrology Precision Caliper (SKU 141072323) is delivered fully calibrated to ISO 17025 and includes the calibration certificate. What measurement accuracy and resolution can be expected? The instrument offers a resolution of 0.01 mm and an accuracy of ±0.03 mm, suitable for standard workshop and production quality control tasks. Is the caliper suitable for shop‑floor conditions with coolant or dust? The IP67 protection rating protects the caliper against dust ingress and temporary immersion, making it well suited to harsh workshop environments. What are the benefits of the dual jaw design? The 60/40 mm dual jaws improve access to recesses and stepped features while maintaining jaw stiffness for more reproducible external measurements. Which display technology is used and how readable is it? A Swiss Digital display with 11 mm digit height is fitted to ensure clear readability even in busy workshop conditions. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Digital Swiss Display 11mm, Force Control 8N, IP67, ISO 17025 Calibrated - Microtech Metrology
Benefit from ISO 17025 traceability, wireless data transfer and IP67 protection for uninterrupted workshop measurement routines — a combination that supports consistent quality and efficient data capture. Order the precision caliper directly via Metav Werkzeuge or consult our specialists for application advice. Precision Caliper — Microtech Metrology, wireless data output and ISO 17025-calibrated The Precision Caliper is a digital measuring instrument for workshop and laboratory use, offering a 0–300 mm measuring range with an IP67 rating for robust use in demanding environments IP67 dust and water protection ISO 17025 calibration certificate supplied Wireless data output for process integration Swiss Digital 11 mm display for clear readings Dependable accuracy for everyday production control The instrument delivers a 0–300 mm measuring range classified as a standard caliper, which balances reach with rigidity for typical machine‑shop and metalworking tasks. With a display resolution of 0.01 mm, the digital readout supports routine inspection and setup work; the device complies with the expectations for digital calipers under DIN 862, where a measurement error limit of around ±0.03 mm applies up to 300 mm. The relatively high measuring force (8 N) contributes to stable contact and repeatable results across successive measurements, reducing variability when checking batches or mating parts. Faster data flow to improve process efficiency Equipped with wireless data output, the instrument removes a manual hand‑off step between measurement and documentation. Direct transfer of values into tables, SPC systems or measurement software shortens cycle time and lowers transcription errors, which is critical for production environments seeking better throughput without sacrificing control. The Swiss Digital 11 mm display provides immediate legibility at the bench, while the wireless link enables centralised logging for traceability and quality records. Built to withstand workshop conditions The caliper’s IP67 rating ensures reliable performance where coolant mist, swarf or temporary immersion might otherwise interrupt measurements. A robust slider and corrosion‑resistant finish keep guide surfaces smooth for long‑term stability, while the compact jaw geometry supports access to smaller features without compromising stiffness. These mechanical characteristics mean the instrument remains serviceable in daily use and preserves the factory calibration over extended intervals. Traceable calibration and quality assurance This measuring instrument is delivered fully calibrated to ISO 17025 and includes a calibration certificate, enabling immediate use in quality‑assured workflows and audits. The certificate documents the traceability chain and measurement uncertainty, supporting internal quality control and supplier verification. For workshop environments that require demonstrable measurement competence, the supplied calibration removes the delay and uncertainty of external verification, letting the instrument enter production control duties straight away. Contact Metav Werkzeuge to secure this Microtech Metrology precision caliper (SKU 141078392) with ISO 17025 calibration and wireless output for traceable, integrated measurement workflows Technical Data Article number: 141078392 GTIN: 4061905036699 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Resolution: 0.01 mm Measuring force: 8 N Display height: 11 mm Special features Digital: yes Digital display: Swiss Digital, 11 mm Data output: Wireless Protection class: IP 67 Calibration: ISO 17025 certificate included FAQ What measuring range does the caliper cover? The precision caliper covers a measuring range of 0–300 mm, suitable for standard machine‑shop and assembly measurements. Is a calibration certificate included with the instrument? Yes, the device is delivered calibrated to ISO 17025 and supplied with a calibration certificate for traceability and audit purposes. How is measurement data transferred to inspection software? Measurement values are sent via the caliper’s wireless data output, enabling direct capture into inspection systems and SPC software. What resolution and accuracy can be expected? The instrument has a display resolution of 0.01 mm; typical digital caliper error limits are in the order of ±0.03 mm up to 300 mm in line with DIN 862 guidance. Can the caliper be used in damp or dusty environments? With an IP67 rating, the caliper is protected against dust ingress and temporary immersion, making it suitable for harsh workshop conditions. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Digital Swiss Display 11mm, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise, traceable measuring in the workshop thanks to high repeatability and robust protection. With ISO 17025 calibration and Wireless data output, inspection routines become both reliable and efficient. Order the Precision Caliper directly via Metav Werkzeuge or ask our consultants if needed. Precision Caliper — digital workshop caliper with Wireless output and IP67 protection by Microtech Metrology Precision Caliper is a digital workshop caliper engineered for traceable dimensional checks in machine and metalworking environments, combining a standard 0–300 mm measuring range with rugged sealing and calibrated accuracy. Wireless data output for seamless logging IP67 dust and water resistance Supplied fully calibrated to ISO 17025 Swiss 11mm digital display, 0.03 mm accuracy Consistent accuracy for production control The caliper delivers a verified 0.03 mm accuracy, supporting repeatable measurements that reduce rework and speed up quality checks. The Swiss 11 mm digital display presents readings clearly at the machine, while the solid digital electronics ensure stable results under typical shop conditions. This level of performance positions the instrument as a reliable measurement tool for everyday workshop quality control, where time-efficient checks and documented results are essential. Built to integrate with modern traceability systems Engineered with Wireless data output and rugged sealing to IP67, the instrument supports direct transfer of measurement data to logging systems without exposing electronics to coolant or dust. This capability simplifies documentation, eliminates manual transcription errors and integrates quality data into production workflows. The robust enclosure and the tactile feel of the slide increase confidence when switching between bench and floor tasks, while the clear digital readout shortens inspection cycles. Ready for immediate use with certified calibration Delivered fully calibrated to ISO 17025, the caliper includes a calibration certificate so the tool can be integrated immediately into accredited measurement procedures. Classified in the Standard measuring range (0–300 mm), it balances reach and stiffness for general mechanical and metalworking applications. The asymmetric jaw lengths (60/40) extend accessibility for internal and external measurements on assemblies, helping to handle a wide variety of shop tasks without swapping instruments. Contact Metav Werkzeuge for tailored advice on Microtech Metrology’s wireless, ISO 17025 calibrated precision caliper and to request the calibration certificate and data‑integration options at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 141072393 GTIN: 4061905037276 ECLASS: 21170344 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Accuracy: 0.03 mm Display height: 11 mm Jaw lengths: 60/40 mm Special features Digital display: Swiss Digital, height 11 mm Data output: Wireless Protection class: IP 67 Delivered calibrated to ISO 17025 FAQ Is the caliper delivered with a calibration certificate? Yes. The Precision Caliper from Microtech Metrology is supplied fully calibrated and includes an ISO 17025 calibration certificate. Can measurement data be transferred to a PC or data logger? The unit supports Wireless data output, allowing integration with data‑collection systems for automated logging and traceability. Is the caliper suitable for use at the machine or on the shop floor? With IP 67 protection and a robust digital slide, this caliper is designed to withstand dust and coolant exposure typical of shop environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com