1200x800x120/150mm Anti-Slip Stop For Measuring Plate Frames, Fits Mess Plates 1200x800x120/150mm - Filetta
€68.00
Product information "1200x800x120/150mm Anti-Slip Stop For Measuring Plate Frames, Fits Mess Plates 1200x800x120/150mm - Filetta"
Secure measurement plates reliably with targeted slip protection that matches 1200 x 800 x 120/150 mm plates; the simple fitting reduces setup time and improves repeatability on measuring plate stands. Order directly via Metav Werkzeuge or consult our specialists for application checks.
Anti-slip pad for measuring plate stands — compatible with 1200 x 800 x 120/150 mm (Filetta)
The Anti-slip pad provides secure, non-slip support for measuring plates on stands and frames, designed specifically for plates with dimensions 1200 x 800 x 120/150 mm
- Prevents plate movement during inspection
- Fits 1200 x 800 mm measuring plates
- Simple retrofit for standard stands
- Secure, slip-resistant contact surface
Stable support for repeatable measurements
The anti-slip solution increases repeatability by preventing lateral movement of the measurement plate during inspection and assembly tasks. By creating a defined interface between the plate and its support, the accessory reduces micro‑shifts that can lead to measurement scatter and rework. The direct effect is a more reliable measuring process, with fewer interruptions for realignment and a clearer traceability of measurement conditions.
Fast compatibility checks and straightforward fitting
Designed to match measuring plates with the dimensions 1200 x 800 x 120/150 mm, the pad allows quick verification of fitment on common plate stands. The product supports straightforward retrofitting on existing stands and frames, enabling immediate integration into workshop workflows. This compatibility reduces downtime and avoids the need for custom adapters, making the component a pragmatic addition to standard inspection setups.
Safer handling and improved inspection workflow
Integrating slip protection into the support system contributes to a calmer inspection environment and lowers the risk of accidental plate displacement during handling. The presence of a defined, slip-resistant contact layer helps maintain alignment during probing and optical checks, which in turn supports consistent measurement outcomes and a smoother quality assurance sequence.
For tailored compatibility advice and prompt delivery from Emmerich, contact Metav Werkzeuge — our consultants will confirm fit and application for Filetta anti-slip pads
Technical data
- Article number: MS131.129
- Brand: Filetta
- Suitable for measuring plates: 1200 x 800 x 120/150 mm
Data
- Fits plate dimensions: 1200 x 800 x 120/150 mm
- Category: Measuring table
Special features
- Slip-resistant contact surface
- For measuring plate stands and frames
- Manufacturer: Filetta
FAQ
How does the anti-slip pad improve measurement accuracy?
The anti-slip pad reduces micro-movements between the plate and stand, improving repeatability and lowering the chance of measurement errors when using Filetta MS131.129.
Is the pad compatible with other plate sizes?
This model is specified for 1200 x 800 x 120/150 mm measuring plates; compatibility with other sizes requires verification against the stand geometry.
Can the pad be fitted to existing stands without modification?
In most cases, the pad is designed for retrofit on standard stands and frames; checking the stand interface dimensions ensures proper seating for the Filetta product.
Does the pad affect probing or tactile measurement methods?
The slip-resistant contact layer is intended to stabilise the plate without impeding access for probes or contact sensors during inspection routines.
Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
Geeignet für
Benefit from a robust support frame, adjustable height options and integrated anti‑tilt fittings to secure a stable measuring base; order the Surface plate stand directly via Metav Werkzeuge or consult Metav’s specialists for configuration advice. MS131.202 Surface plate stand by Filetta — adjustable height and anti‑tilt protection The MS131.202 Surface plate stand provides a stable support frame for precision surface plates in metrology workshops, combining ergonomic height ranges with secure fixing elements for reliable, repeatable measurement setups Adjustable heights 850–925 mm for varied setups Anti‑tilt locks for secure plate fixation Levelling feet with metal caps for stable support Engineered stability for repeatable measurements A stable measuring base is essential for comparable results. The stand’s design delivers a robust support frame that minimises vibration and lateral movement during inspection work, so readings remain consistent across cycles. Built for industrial metrology, the frame suits surface plates used in quality control and assembly processes and reduces rework by keeping the reference plane steady throughout measurement sequences. Fast set‑up and secure fixation for busy shops Included with the stand are 3 support struts (Bessel style), 2 anti‑tilt locks and levelling feet fitted with metal caps, allowing rapid installation and secure mechanical retention of the surface plate. These fittings shorten preparation time and remove guesswork when locating the plate, which translates into a quicker inspection throughput and fewer interruptions on the shop floor. Flexible heights to match different workflows Three height ranges are available—850–875 mm, 870–895 mm and 900–925 mm (including surface plate)—so the support can be matched to plate thickness and operator ergonomics or integrated equipment. The adjustable heights enable comfortable working postures and straightforward alignment with peripheral tools, helping to cut operator fatigue and maintain productivity in repeated measuring tasks. Workshop‑ready design that supports quality routines The stand is specified for workshop use and fitted with practical features that withstand daily handling: levelling feet with metal caps protect floors and provide fine height adjustment, while anti‑tilt devices add a layer of safety when loading heavy plates. Supplied accessories ensure the support is ready for immediate integration into measuring benches and laboratory tables, helping to safeguard measurement quality from the start. For a dependable, height‑adaptable measuring station configured to exact workshop needs, contact Metav Werkzeuge to discuss the Filetta MS131.202 and arrange supply from Emmerich. Technical data Article number: MS131.202 Manufacturer: Filetta Category: Messtisch (measuring table) Height (including surface plate): 850–875 mm / 870–895 mm / 900–925 mm Included accessories: 3 support struts (Bessel style); 2 anti‑tilt locks; levelling feet with metal caps Facts Height ranges: 850–875 mm; 870–895 mm; 900–925 mm Special features Anti‑tilt protection Levelling feet with metal caps 3 support struts (Bessel style) FAQ Is the stand suitable for different surface plate thicknesses? Yes. The stand’s three height ranges (850–875 mm, 870–895 mm, 900–925 mm including plate) allow adaptation to different surface plate thicknesses and workshop workflows for the MS131.202 by Filetta. Which accessories are supplied with the stand? The MS131.202 is supplied with three support struts (Bessel style), two anti‑tilt locks and levelling feet with metal caps for immediate installation and secure plate fixing. Can the stand be used in a quality control laboratory? Yes. The support frame is designed for metrology applications and provides a stable measuring base suitable for quality control benches and inspection areas. How does the anti‑tilt feature improve safety? The anti‑tilt locks secure the surface plate against accidental tipping during loading or adjustment, reducing the risk of damage to the plate and ensuring a safer working environment. Is the stand compatible with standard measuring tables? The MS131.202 is categorised for measuring table use and is compatible with common workshop and laboratory arrangements where a stable, height‑adjustable surface plate support is required. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com