1500x1000x150/200mm Anti-Slip Feet for Measuring Table Frames, For 1500×1000×150/200 or 2000×1000×200/250mm Tables - Filetta
€68.00
Product information "1500x1000x150/200mm Anti-Slip Feet for Measuring Table Frames, For 1500×1000×150/200 or 2000×1000×200/250mm Tables - Filetta"
Take advantage of secure positioning and reduced measurement uncertainty through a purpose-built anti-slip solution for measuring plate frames; its compatibility with common plate formats and straightforward retrofitting keeps inspection workflows efficient. Order or request specification support via Metav Werkzeuge for reliable delivery and technical advice.
Anti-slip for measuring plate frames — secure support for industrial measuring plates (Filetta)
The Anti-slip for measuring plate frames provides slip-resistant support for measuring plates used on inspection benches and messtables across manufacturing and metrology environments.
- Fits 1500×1000×150/200 mm measuring plates
- Compatible with 2000×1000×200/250 mm plates
- Prevents lateral movement during inspection
Stable support that improves measurement reliability
The primary benefit is a visible reduction in lateral movement during setup, delivered by a slip-resistant contact interface that maintains the plate position under normal handling and probing forces. This stability directly contributes to improved measurement accuracy and repeatability, since uncontrolled micro‑shifts at the workpiece interface are a common source of measurement scatter. The design focuses on secure seating rather than permanent fixturing, so repeat measurements remain comparable while handling remains flexible for inspection sequences.
Compatibility that minimises installation time
Designed for quick integration with common measuring plate formats, the unit supports 1500×1000×150/200 mm and 2000×1000×200/250 mm plates used on standard messtables. The compact footprint and straightforward mounting concept enable retrofitting to existing measurement plate frames with minimal downtime, preserving workshop throughput. The compatibility with typical industrial plate dimensions ensures that calibration jigs and inspection setups need few adjustments, safeguarding process continuity during upgrades or replacement cycles.
Robust design for the workshop environment
Built for continuous use in inspection and production areas, the component provides a durable contact surface that resists wear while maintaining its slip resistance properties over repeated cycles. Delivered under the Filetta brand, the product is intended for integration into measurement benches and inspection fixtures where handling speed and positional security matter. Supply via an established distributor acts as a quality filter for the European market, supporting consistent availability and predictable integration into existing metrology fleets.
Contact Metav Werkzeuge in Emmerich for tailored guidance on Filetta anti-slip solutions and to request technical specifications or a quotation via info@metav-werkzeuge.com or by phone at +49 2822 7131930
Technical data
- Article number: MS131.128
- Manufacturer: Filetta
- Category: Messtisch
Facts
- Compatible plate size: 1500 × 1000 × 150/200 mm
- Compatible plate size: 2000 × 1000 × 200/250 mm
- SKU: MS131.128
Special features
- Slip-resistant support for measuring plate frames
- Designed for inspection benches and messtables
- Simple retrofit installation
FAQ
How does the anti-slip unit affect measurement accuracy?
The anti-slip unit for measuring plate frames reduces lateral movement at the plate interface and therefore lowers one common source of measurement variability; the Filetta anti-slip supports improved repeatability during inspection runs.
Which plate sizes are supported by this solution?
Supported formats include 1500×1000×150/200 mm and 2000×1000×200/250 mm, matching common industrial measuring plates for messtables and inspection benches.
Can the anti-slip be retrofitted to existing measuring plate frames?
Yes, the design permits straightforward retrofit to standard measuring plate frames, allowing integration into existing inspection setups with minimal adjustment.
Is the unit suitable for continuous workshop use?
The product is intended for industrial inspection environments and provides a durable, slip-resistant contact surface designed to withstand repeated handling and routine measurement cycles.
Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
Geeignet für
A robust, height‑adjustable stand that pairs stable support with practical safety features: choose the model that matches your working height and benefit from the included three bracing supports, two anti‑tilt locks and adjustable feet with metal caps for reproducible inspection results; order via Metav Werkzeuge or consult their specialists for application guidance. Measuring plate stand MS131.203 — height‑adjustable surface plate support by Filetta The Measuring plate stand MS131.203 is a floor stand designed to support a surface plate while providing two selectable working‑height ranges for inspection and metrology tasks. Height ranges 850–875 mm or 900–925 mm Three bracing supports (Bessel‑style) Two anti‑tilt safety locks Adjustable feet with metal caps Stable, adjustable support that preserves measurement accuracy A purpose‑built stand for metrology environments, the MS131.203 provides a stable support platform that reduces sources of error during inspection. The supplied height options (850–875 mm and 900–925 mm, including the measuring plate) allow ergonomic alignment with existing benches and measuring devices. By combining a rigid frame with bracing supports, the assembly helps maintain the flatness and orientation of the surface plate under typical workshop loads, which contributes directly to repeatable measurements and fewer rework cycles. Built for workshop efficiency and safe operation Safety and day‑to‑day convenience are integrated: the stand includes two anti‑tilt locks and three bracing supports to prevent accidental movement during measurements, while adjustable feet with metal caps permit stable levelling on imperfect floors. These features cut setup time and reduce the need for temporary shimming, so inspection processes run more smoothly. The mechanical simplicity of the design also minimises maintenance requirements, enabling focused metrology work without frequent adjustments. Fits inspection benches and precision workflows Designed as a support for surface plates in laboratories, workshops and quality control stations, this stand integrates easily into existing inspection layouts. The Filetta build supports conventional surface‑plate sizes and is suited to repeatable tasks such as dimensional checks, fixture set‑up and component inspection. The combination of stable construction and adjustable height translates into improved operator ergonomics and a more efficient measurement workflow, making it a pragmatic choice for production and QC environments where reliability and uptime matter. For expert advice on integrating the Filetta measuring plate stand into a workshop, contact Metav Werkzeuge in Emmerich for tailored guidance and efficient delivery Technical data Article number: MS131.203 Name: Measuring plate stand Brand: Filetta Height: 850–875 mm / 900–925 mm (including measuring plate) Accessories included: 3x bracing supports (Bessel‑style), 2x anti‑tilt locks, adjustable feet with metal caps Core technical data Height ranges: 850–875 mm; 900–925 mm Bracing supports: 3 pieces Anti‑tilt locks: 2 pieces Special features Application: support for surface plates and inspection setups Design: floor stand / tripod‑style bracing Levelling: adjustable feet with metal caps FAQ What working heights are available with this stand? The Measuring plate stand MS131.203 by Filetta offers two working‑height bands: 850–875 mm and 900–925 mm, stated values include the measuring plate. Which accessories are supplied with the unit? Delivery of the MS131.203 includes three bracing supports (Bessel‑style), two anti‑tilt locks and adjustable feet fitted with metal caps. Is the stand suitable for fixed installation in a metrology lab? Yes, the stand is designed to support surface plates for inspection and metrology tasks and is appropriate for lab or workshop installation where a stable support is required. Can the stand be levelled on uneven floors? Level adjustment is achieved via the adjustable feet with metal caps, allowing stable positioning on non‑uniform surfaces. Does the stand prevent accidental tipping during measurement? The MS131.203 is supplied with two anti‑tilt locks and three bracing supports to enhance stability and reduce the risk of accidental movement during inspections. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
Combine robust support for large measuring plates with thoughtful workshop ergonomics: the stand offers reliable stability for 2000×1000 measuring plates, an adjustable height range for ergonomic setup and an inclusive accessory package for safe, immediate installation. Order the stand directly via Metav Werkzeuge or consult our specialists for application advice. Surface plate stand MS131.204 — rigid support for 2000×1000 mm plates, adjustable height A Filetta surface plate stand designed for 2000×1000×200/250 mm measuring plates, delivering stable support and safe handling in industrial workshops Stable support for 2000×1000 mm plates Adjustable height 850–925 mm incl. plate Includes 3 supports, 2 tipping guards, levelling feet Not suitable for base cabinet use Stable foundation for precision measurement A robust surface plate stand provides the foundation for reproducible measurement results. The MS131.204 is configured for 2000×1000×200/250 mm plates and is engineered to minimise vibration and flexing during use, which preserves the flatness of the measuring surface. By combining a rigid frame with defined support points, the stand reduces measurement scatter and shortens setup time, making it suitable for quality control benches and assembly areas where consistent readings are essential. Ergonomic height and workshop integration Two height settings are accommodated in the design, providing an adjustable height range of 850–875 mm and 900–925 mm (both ranges stated including the measuring plate). This flexibility allows the stand to suit different working postures and bench layouts while keeping the measuring surface at an optimal eye level. The controlled height options aid operator comfort and reduce handling time when transferring parts between fixtures or test stations, contributing to steady workflow and fewer handling errors. Ready-to-use accessories and safe handling Delivered with a practical accessory pack, the stand includes three support braces (Bessel), two tipping protections and levelling feet with metal caps, enabling secure positioning and rapid installation. These items minimise the need for additional purchases and support a safe working environment by preventing accidental tilt and ensuring the frame sits true on uneven floors. Note that the frame is specified as not suitable for base cabinet integration; it is intended as a free-standing support for large surface plates. Choose the Filetta surface plate stand for a dependable metrology base and contact Metav Werkzeuge in Emmerich for tailored procurement or technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: MS131.204 Name: Messplattengestell (surface plate stand) Manufacturer: Filetta Facts Compatible plate size: 2000×1000×200/250 mm Height (including plate): 850–875 mm / 900–925 mm Special features 3 support braces (Bessel) 2 tipping protections Levelling feet with metal caps Not suitable for base cabinet use FAQ What plate dimensions are compatible with this stand? The MS131.204 surface plate stand is designed for 2000×1000×200/250 mm measuring plates and supports the specified plate thicknesses for reliable bearing. Is the height adjustable to suit different operators? Yes, the stand offers two height settings—850–875 mm and 900–925 mm including the plate—so bench height and ergonomic requirements can be matched. Which accessories are supplied with the stand? Delivery includes three support braces (Bessel), two tipping protections and levelling feet with metal caps to ensure stability and safe installation. Can the stand be used with an under-shelf or base cabinet? No, the design is explicitly not suitable for base cabinet installation; it is intended as a free-standing support frame. Who manufactures this measuring table stand? The stand is produced by Filetta; the MS131.204 is specified and supplied for industrial metrology applications. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com