1000x630x100/150mm Anti-Slip Pad For Measurement Table Plates - Filetta
€68.00
Product information "1000x630x100/150mm Anti-Slip Pad For Measurement Table Plates - Filetta"
Take advantage of a compact, reliable anti-slip solution that secures measurement plates with the dimensions 1000 x 630 x 100/150 mm, reduces lateral movement during set-up and inspection, and integrates easily with measurement plate frames and stands. Order the anti-slip device directly via Metav Werkzeuge or ask our consultants if needed.
Anti-slip device for measurement plate frames by Filetta — fits 1000 × 630 mm plates
A anti-slip device designed to hold measurement plate frames steady on workshop stands and inspection rigs, optimising repeatable set-ups for metrology tasks.
- Secure hold for 1000 x 630 mm measurement plates
- Designed for measurement plate frames and stands
- Robust anti-slip function for workshop environments
Improved measurement repeatability through secure support
A stable support surface is a prerequisite for precise inspection. The anti-slip device prevents unwanted lateral shift of the measurement plate, which reduces measurement scatter and the need for repeat runs. By limiting micro-movements during tactile or optical probing, the component supports consistent contact conditions and therefore enhances repeatability across multiple operations. This makes the solution particularly useful where fixed-fixture accuracy feeds directly into quality decisions.
Fast, straightforward fitment for workshop workflows
Fitting is engineered for practicality: the design integrates with existing measurement plate frames and associated stands, allowing teams to prepare jigs and plates quickly and return to production without lengthy rework. The compact format minimises set-up time while maintaining the required clamping stability. As a result, cycle times for inspection and alignment tasks are shortened and workshop throughput benefits from fewer interruptions and faster batch checks.
Protects test routines without complex adjustments
The device preserves the alignment and reference plane of the measurement plate during both static and dynamic checks. Because it is purpose-built for measurement plate frames, there is no need for additional fixtures or bespoke adaptors for the specified plate size. This focused compatibility reduces the scope for operator error and keeps the test procedure lean—improving the overall efficiency of calibration and quality-assurance workflows.
Supply reliability and the Metav advantage
Sourcing this Filetta anti-slip solution through Metav leverages a dependable European supply chain and hands-on specialist support from a supplier experienced in precision metrology. Metav’s offering aims to make high-precision accessories accessible across workshops and small production facilities, ensuring consistent availability and a straightforward procurement path. The practical combination of compatibility, quick fitment and supply reliability supports stable, long-term measurement processes.
Contact Metav Werkzeuge for tailored advice on the Filetta anti-slip device and ensure measurement plate frames are secured precisely and promptly
Technical Data
- Article number: MS131.127
- Manufacturer: Filetta
- Category: Messtisch
Facts
- Compatible plate dimensions: 1000 x 630 x 100/150 mm
- Intended use: Measurement plate frames and stands
Special features
- Anti-slip function for measurement plate frames
- Designed for workshop and inspection environments
- Integrates with measurement plate stands
FAQ
Which plate dimensions are supported?
The anti-slip device is designed for measurement plates sized 1000 x 630 x 100/150 mm (Filetta, SKU MS131.127).
Can it be used with measurement plate frames and stands?
Yes, the device is intended for use with measurement plate frames and compatible stands to provide stable support during inspection tasks.
Will the anti-slip device improve repeatability?
Yes, by preventing lateral movement of the plate, the device helps reduce variation between successive measurements and supports repeatable test conditions.
Is this Filetta accessory suitable for workshop use?
The design accommodates typical workshop and inspection environments where measurement plates are mounted on frames or stands.
How is the item identified for ordering?
Refer to SKU MS131.127 (Filetta) when enquiring or ordering through Metav Werkzeuge
Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
Geeignet für
Stable, height-adjustable support with anti-tilt locks and three support brackets provides a dependable base for surface plates, improving repeatability in inspection tasks. The adjustable feet with metal caps permit precise levelling on uneven floors. Order via Metav Werkzeuge or consult our specialists for application guidance and supply. Surface Plate Stand MS131.201 — Filetta height-adjustable metrology frame The Surface Plate Stand MS131.201 offers a stable, height-adjustable frame for secure mounting of measuring plates in metrology, inspection and workshop environments. Height-adjustable 900–975 mm overall Anti-tilt safety devices included Three support brackets supplied Adjustable feet with metal caps Engineered for stable, repeatable measurements The stand is designed to deliver stable support for measuring plates, reducing variability in routine inspections. With two selectable overall height ranges (900–925 mm and 950–975 mm, measured including the measuring plate), the frame enables ergonomic working heights and consistent positioning of inspection artefacts. Built to hold a flat measuring surface securely, the structure combines load distribution and low centre-of-gravity to reduce micro-movements during tactile or optical checks. That predictable behaviour translates into more repeatable readings and fewer re-measurements on the shop floor. Accessories that speed up setup and increase safety Included with the frame are three support brackets (Besselsche), two anti-tilt locks and adjustable feet with metal caps, which minimise the need for additional components. The support brackets simplify the seating of the plate and aid in fine alignment; the anti-tilt locks secure the assembly during handling and maintenance, lowering the risk of accidental displacement. The adjustable feet allow precise levelling on uneven surfaces, while the metal caps protect floor finishes and provide reliable contact points. These features shorten commissioning time and reduce logistical effort during installation. Practical benefits for workshops and inspection labs This Filetta frame is suitable for quality-control benches, calibration areas and precision workshops where a stable base and correct working height are essential. The clear height ranges and solid support arrangement make the frame a pragmatic choice for teams aiming to standardise inspection procedures. The robust design supports routine metrology processes, from layout and visual checks to probing and comparative measurements, contributing to consistent part acceptance and fewer process interruptions. Integration and workplace considerations The stand is categorised for use with surface plates and bench-mounted measuring setups and is compatible with a wide range of plate sizes where the specified overall height is required. The included mounting and safety hardware reduce the need for bespoke fittings, making the frame an economical centrepiece for a measuring table or inspection station. Its straightforward architecture supports straightforward maintenance and, where necessary, rapid relocation within a production environment. For secure, height-adjustable support choose the Filetta Surface Plate Stand and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and reliable supply Technical Data Article number: MS131.201 Brand: Filetta Category: Measuring table / surface plate stand Height (including measuring plate): 900–925 mm / 950–975 mm Included accessories: 3 x support brackets (Besselsche), 2 x anti-tilt locks, adjustable feet with metal caps Core technical data Height range option 1: 900–925 mm Height range option 2: 950–975 mm Support brackets: 3 Anti-tilt locks: 2 Special features Height-adjustable frame for measuring plates Anti-tilt safety devices for secure handling Adjustable feet with metal caps for levelling Designed for metrology benches and inspection tables FAQ Is the height of the stand adjustable and what are the exact ranges? The Surface Plate Stand MS131.201 is supplied with two overall height ranges: 900–925 mm and 950–975 mm (both values include the measuring plate). What accessories are delivered with the frame? Delivery of the Filetta MS131.201 includes three support brackets (Besselsche), two anti-tilt locks and adjustable feet fitted with metal caps. Is this frame suitable for workshop and inspection use? Yes, the stand has been developed for measuring plates and inspection benches, making it suitable for quality-control areas and workshop metrology stations. How are levelling and stability achieved on uneven floors? The supplied adjustable feet with metal caps enable precise levelling, while the bracket layout and anti-tilt locks enhance overall stability. Can the stand be integrated immediately into an existing measuring table? The frame is configured for straightforward integration with surface plates and typical inspection setups; the included support hardware reduces the need for additional fittings. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com