Digital calipers for fast, reliable dimensional control
Digital calipers and precision calipers deliver fast, repeatable length measurements for metalworking, woodworking and electronics applications, reducing rework and speeding up inspection workflows. Designed with robust stainless steel bodies, high-resolution digital displays and capacitive sensors, these measuring tools provide high accuracy, easy data output and mm/inch conversion for seamless integration into quality processes. Suitable for production, workshop and lab use, they offer durable performance and intuitive operation to support consistent tolerance control.
150mm Digital Caliper Left-Handed Stainless Steel ABS Function Data Output RB 5, Four-Point Measurement, Plastic Case - Metav IndustryLine
Take advantage of a left‑handed digital caliper that combines 0.01 mm resolution, an ABS absolute setting and hardened stainless construction for reliable shop measurements; order the instrument directly via Metav Werkzeuge or consult the Metav team for specification advice. Digital caliper 150 mm — left‑hand version, hardened stainless steel, ABS The Digital caliper 150 mm is a left‑hand configuration measuring tool for precise workshop and quality‑control tasks, designed for routine interior, exterior, depth and step measurements. Hardened stainless steel body for workshop use 0.01 mm resolution with mm/inch display ABS absolute function for retained zero position Four‑in‑one measurement capability Consistent precision for everyday workshop workflows The 150 mm instrument sits in the Standard measuring class (best suited to 100–300 mm ranges), offering a pragmatic balance of reach and rigidity for general engineering and metalworking tasks. With a 0.01 mm resolution on the digital display and the familiar mm/inch readout, the device supports typical production and inspection work where repeatable results are required. The mechanical design uses hardened stainless steel for corrosion resistance and long service life; this reduces wear on the jaws and keeps measurement reproducibility high across repeated cycles. Ergonomic left‑hand design and practical operation A left‑handed layout improves handling and sightlines for left‑hand operators without compromising functionality. The instrument includes ABS (absolute) functionality so the slider retains its reference zero after power‑off, and an easy ON/OFF, ZERO and mm/inch keypad for quick setup. Four measurement modes are available — outside, inside, depth and step — which covers the common measuring tasks on components, fixtures and assemblies. These operational features shorten setup time and make routine checks more efficient in a production environment. Data connectivity and process integration Equipped with RB 5 data output, the caliper can be integrated into data collection or SPC workflows where supported by compatible interfaces, improving traceability and reducing manual transcription errors. The instrument’s digital nature aligns with the standard expectations for workshop calipers — 0.01 mm display resolution and conventional accuracy ranges for digital instruments — and supports straightforward logging of measured values. This combination of digital readout, robust material and standardised output offers a cost‑effective route into more connected quality processes. Contact Metav Werkzeuge today to confirm compatibility with existing data systems or to request tailored advice for integrating this Metav IndustryLine caliper into your measurement routine Technical data Article number: M216.089.N GTIN: 4054469110356 Brand: Metav IndustryLine Data Measuring range: 0–150 mm Resolution/display step: 0.01 mm Jaw length: 40 mm Data output: RB 5 Special features Material: hardened stainless steel Measurement modes: outside, inside, depth, step (four‑in‑one) ABS absolute function (retained zero) Digital display with ON/OFF, ZERO and mm/inch keys Left‑hand version Category: caliper (digital) FAQ What measuring tasks is this caliper best suited for? The caliper is configured for general workshop and quality‑control tasks; the 150 mm range makes it ideal for standard machine‑shop parts, fixtures and small assemblies where the Standard class balance of reach and stiffness is required. Does the instrument support both metric and imperial units? Yes, the digital readout includes mm/inch switching so measurements can be taken or recorded in either system without recalculation. Can measured values be exported electronically? The caliper provides an RB 5 data output suitable for compatible data collection interfaces, enabling electronic transfer when paired with matching adapters or systems. Is the caliper suitable for harsh workshop environments? Constructed from hardened stainless steel, the unit resists corrosion and wear typical in production settings, delivering prolonged service life under normal workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper Preset With Removable Roller, 3V, DIN 862, Supplied In Case, Four-Function Measurement - Metav IndustryLine
Benefit from consistent workshop measurement with the 150 mm digital caliper's quick Preset function and removable measuring roller; the hardened stainless steel construction and DIN 862 conformity deliver robust, repeatable results for everyday inspection. Order the caliper directly via Metav Werkzeuge or consult our technical team for application advice. Digital caliper M216.125.P — 150 mm, Preset, removable roller (Metav IndustryLine) The Digital caliper M216.125.P is a 150 mm precision caliper with a SET/PRESET button and a detachable drive roller, designed for standard workshop and quality‑control tasks 150 mm measuring range, DIN 862 compliant Preset function with SET/PRESET and ON/OFF control Removable measuring roller with drive piece included Stainless hardened steel with glass scale and metal electronics Accurate everyday inspection without compromise The instrument is classified as a standard‑range caliper (measuring range up to 300 mm), which offers the best balance between reach and rigidity for general mechanical and metalworking tasks. With a 150 mm scale it covers the universal workshop needs while maintaining the stiffness required for reproducible readings. The digital module features an ON/OFF switch and a SET/PRESET key to store a reference quickly, reducing repetitive adjustments during batch checks. The unit supports the four classic measuring modes — internal, external, depth and step — enabling a single tool to replace multiple gauges and streamlining inspection routines. Built for workshop durability and straightforward handling The frame and jaws are manufactured from stainless hardened steel, the scale runs on a glass guide and the electronics are housed in a robust metal casing to resist everyday wear and workshop conditions. The relatively low mass of approximately 0.4 kg keeps handling nimble while preserving stability when measuring. A detachable measuring roller is supplied as a drive piece, allowing measurements along contours or curved surfaces without compromising contact quality. The combination of hardened materials and a compact construction reduces wear, extends service life and keeps maintenance effort to a minimum. Digital convenience and integration for efficient quality control Equipped with a clear digital display and the preset facility, the caliper accelerates routine inspections and minimises transcription errors. Data output is provided via the RB 5 interface and the caliper runs from a 3 V power system, facilitating straightforward connectivity and long operating intervals. Conformity with DIN 862 places the instrument within recognised measurement practice for workshop and production use. For users familiar with digital caliper standards, the device supports typical workflows where fast, repeatable readings and simple data export are priorities, improving throughput and traceability in inspection processes. For reliable everyday precision, choose the Metav IndustryLine M216.125.P and contact Metav Werkzeuge in Emmerich for ordering or tailored technical guidance Technical data Article number: M216.125.P GTIN: 4054469167886 EClass: 21170344 Tariff number: 90173000 Facts Measuring range: 0–150 mm Weight: 0.4 kg Power supply: 3 V Jaws length: 40/21 mm Special features Digital display with ON/OFF and SET/PRESET button Four measurement modes: internal, external, depth, step Removable measuring roller; drive piece included Material: stainless hardened steel; scale with glass guide Electronics in metal housing Complies with DIN 862 Data output: RB 5 FAQ What measuring functions does this caliper offer? The Digital caliper M216.125.P supports four measuring modes — internal, external, depth and step — covering the typical inspection tasks found in workshop and quality control environments. Is the measuring roller included and what is it for? Yes, a removable measuring roller (drive piece) is supplied with the caliper; it enables smoother measurements across curved surfaces and helps when measuring along contours. Can measurement data be exported from this instrument? The caliper provides a data output via RB 5, allowing measured values to be transferred to compatible data loggers or inspection systems. Does the instrument meet recognised measurement standards? The instrument is designed and labelled in accordance with DIN 862, placing it within established workshop measurement practice. How does the preset function improve workflow? The SET/PRESET button permits storing a reference value quickly, reducing manual adjustments during repetitive checks and improving throughput and consistency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper Round Stainless Body Removable Measuring Roller Large LCD DIN 862, Three-Point Measurement, Supplied in Case - Metav IndustryLine
Take advantage of durable construction, straightforward digital reading and data connectivity for reliable workshop measurement; combine stainless hardened steel design with a removable measuring roller for flexible use and order via Metav Werkzeuge or consult our advisors for technical clarification. Digital caliper 150 mm – stainless steel, removable roller, large LCD (Metav IndustryLine) The Digital caliper 150 mm – stainless steel, removable roller, large LCD (Metav IndustryLine) is a compact workshop caliper for standard measuring tasks in metalworking and general engineering, meeting DIN 862 and offering both manual and data-assisted measurement options. Large high-contrast LCD display Removable measuring roller included Hardened stainless steel construction Four-way measurement plus depth gauge Dependable everyday precision for the workshop This measuring instrument is designed for the universal workshop range 0–150 mm, classified as a standard caliper size that balances reach and rigidity for routine machine‑shop and maintenance tasks. The stainless, hardened scale combined with a glass guide rail ensures stable sliding action and resistance against wear; this produces reproducible readings over time and reduces adjustment frequency. The sealed metal electronics housing contributes to long service life under typical workshop conditions. The overall package supports fast decisions on the shop floor through a large LCD that presents measurements clearly, reducing read-off errors and speeding up repetitive checks. Versatile measurement modes for multiple applications Equipped for four-way measurement, the instrument covers external, internal, step and depth measurements in one compact tool; the depth gauge is integrated for reliable depth checks without additional accessories. A removable measuring roller is supplied for specialised situations where a rolling contact or workpiece feed is required, while the standard jaw geometry handles typical external and internal dimensions. The digital interface includes ON/OFF, ZERO, UNIT and HOLD controls for straightforward operation and temporary value retention. Data output is provided via RB 5, allowing seamless transfer of measured values into documentation or quality‑control systems when required. Robust build and practical ergonomics for daily use Constructed from hardened stainless steel with a glass‑rail scale and metal electronics housing, the instrument resists routine shop wear and maintains alignment under regular handling. With a compact weight of about 0.4 kg, it is easy to manoeuvre while remaining stable in the hand; the jaw lengths of 40/21 mm provide a practical balance between access and rigidity. Power is supplied by a simple 3 V cell, guaranteeing low maintenance and straightforward battery replacement. Conformity with DIN 862 ensures compatibility with standard measuring procedures used across European workshops and inspection stations. For precise and resilient measuring in everyday industrial use, contact Metav Werkzeuge to discuss the Metav IndustryLine stainless digital caliper and its integration into existing measuring routines. Technical data SKU: M216.128.N GTIN: 4054469159706 Tariff number: 90173000 Manufacturer: Metav IndustryLine Core specifications Measuring range: 0–150 mm Weight: 0.4 kg Jaw lengths: 40/21 mm Power supply: 3 V Design & special features Material: hardened stainless steel, glass guide rail, metal electronics housing Display: large LCD with ON/OFF, ZERO, UNIT, HOLD Measurement modes: external, internal, step, depth (four-way measurement) Data output: RB 5 Compliance: DIN 862 Removable measuring roller included FAQ Is this caliper suitable for routine workshop quality checks? Yes. The Digital caliper 150 mm from Metav IndustryLine meets DIN 862 and its 0–150 mm range covers standard workshop inspection tasks, making it appropriate for regular quality checks. Does the instrument support data transfer to a PC or inspection system? Yes. The caliper provides an RB 5 data output for connection to compatible recording devices or interfaces, enabling efficient transfer of measured values into documentation workflows. Can the tool perform depth measurements and inside measurements? Yes. The design includes an integrated depth gauge and internal measuring jaws, and the device supports four-way measurement for external, internal, step and depth checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper With 1.6mm Round Depth Rod, IP67, 0.01mm Resolution, Four-Function, Stainless Hardened - Metav IndustryLine
Take advantage of a robust, workshop-ready instrument that combines IP67 protection, a 0.01 mm digital resolution and hardened stainless steel construction for reliable results in everyday quality control. The unit’s 150 mm measuring range and round depth rod (1.6 mm) make it a practical Standard-class caliper for machine shops; order directly via Metav Werkzeuge or consult the Metav team for application advice. Digital caliper 150 mm, IP67 with round depth rod 1.6 mm — Metav IndustryLine The Digital caliper 150 mm, IP67 with round depth rod 1.6 mm is a workshop-grade measuring instrument designed for robust indoor use and precise dimensional checks across machine building and inspection tasks. IP67 protection for dust and water resistance 0.01 mm digital resolution with MODE/SET display Hardened stainless steel construction Four measurement functions: inside, outside, depth, step Consistent accuracy for routine quality control A clear technical advantage of this digital instrument is its 0.01 mm display resolution combined with an indicated measurement accuracy of ±0.03 mm, which aligns with industrial expectations for Standard-range calipers. The 150 mm measuring span places the tool in the Standard category for workshop use, offering a practical balance between reach and rigidity. Compliance with DIN 862 supports reproducible procedures and makes the instrument suitable for incoming inspections, setup checks and day‑to‑day dimensional control where traceable, comparable values are required. Built to withstand the workshop environment The jaws and beam are made from hardened stainless steel, giving the caliper mechanical durability while resisting corrosion in typical production environments. With an IP67 rating, the unit tolerates dust ingress and temporary immersion, reducing the risk of downtime due to contamination or coolant exposure. The slender round depth rod (1.6 mm) permits reliable depth and step measurements in narrow features, while the compact overall weight (approx. 0.4 kg) keeps single‑hand operation comfortable during repetitive measurement tasks. Practical operation and measurement versatility The electronic display features MODE/SET controls for quick unit selection and zeroing, supporting metric and inch readouts (resolution: 0.01 mm / 0.0005 in) and straightforward setup in inspection workflows. The instrument offers four measurement modes — outside, inside, depth and step — which reduces the need to change tools between typical checks. Delivery includes a protective transport case to simplify storage and safe handling between job stations. The overall design emphasises dependable ergonomics and straightforward integration into quality routines. For workshop-grade measurements relying on IP67 protection and precise 0.01 mm readout, choose the Metav IndustryLine digital caliper and contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M216.151.N GTIN: 4054469178844 Brand: Metav IndustryLine Facts Measuring range: 0–150 mm Resolution: 0.01 mm (0.0005 in) Indicated accuracy: ±0.03 mm Weight: 0.4 kg Depth rod diameter: 1.6 mm Special features Material: hardened stainless steel Protection class: IP67 Display: digital with MODE and SET buttons Measurement modes: outside, inside, depth, step Conforms to DIN 862 Supplied in protective case for transport and storage FAQ What measurement functions does the caliper provide? The digital caliper supports four measurement functions — outside, inside, depth and step — enabling versatile checks without changing tools. Is the instrument suitable for use near coolants or in dusty environments? Yes, the unit’s IP67 rating ensures resistance to dust ingress and to temporary immersion, making it robust in many workshop conditions. What level of precision can be expected from this 150 mm caliper? The caliper provides a resolution of 0.01 mm with an indicated accuracy of ±0.03 mm, appropriate for standard machine‑shop inspection work. Does the caliper comply with any measurement standards? The instrument is manufactured to meet the requirements of DIN 862, supporting reproducible metrology procedures in the workshop. What materials and features support durability? Construction in hardened stainless steel, a sealed IP67 design and a protective transport case combine to reduce wear and protect the instrument during use and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper With ABS, Large LCD, mm/inch, USB Output - Filetta
Take advantage of the combination of 0–150 mm measuring range, 0.01 mm resolution and USB data output for reliable workshop measurement and straightforward documentation. The robust design with locking screw and depth gauge ensures consistent results on the shop floor. Order the Filetta digital caliper directly via Metav Werkzeuge or consult our specialists for application advice. Digital Caliper M909.443 — 0–150 mm range, 0.01 mm resolution, USB output (Filetta) Digital Caliper M909.443 is a compact, workshop-grade measuring tool for precise metric and imperial readings, designed for routine quality checks and machining tasks *0–150 mm measuring range, standard workshop size *0.01 mm resolution for reliable accuracy *Large LCD with mm/inch and reset functions *USB output and locking screw for secure data transfer Consistent accuracy for everyday inspection tasks The 0–150 mm measuring range positions this instrument in the standard class of calipers, offering the best balance between reach and stiffness for general machine‑shop and metal‑working needs. With a resolution of 0.01 mm, the instrument provides the fine graduation required for dimensional control on components, fixtures and assemblies. Conformance to DIN 862 ensures that readings are comparable with industry practice, while the ABS (absolute) function keeps zero reference stable after power cycles — reducing setup time and measurement drift for repetitive checks. Streamlined data capture and traceable results Equipped with a Large LCD and a clear mm/inch switch plus reset and on/off controls, measurement read‑out is both fast and unambiguous. The integrated USB output simplifies transfer of measured values to inspection software or spreadsheets, supporting efficient documentation and quality records. This capability reduces transcription errors and speeds up batch inspection, making the caliper a pragmatic tool for shops that combine manual measurement with digital traceability. Practical design that withstands daily use The caliper’s practical features support robust handling in production environments: a locking screw secures the slide for repeat measurements, a dedicated depth gauge facilitates depth and step measurement, and a jaw length of 40 mm improves grip and contact stability on small workpieces. Power is provided by a single CR2025 battery, enabling long standby times and simple replacement without special tools. The mechanical build and control layout are optimised for repeatable results and straightforward maintenance. Suitable applications and user groups This digital caliper is ideal for general inspection benches, small‑batch assembly, apprenticeships and maintenance departments that require dependable metric and imperial readings with quick data export. The instrument supports routine quality control, first‑article checks and quick verification tasks where fast, documented measurement is more valuable than ultra‑specialised metrology. Its combination of easy handling and USB connectivity makes it a pragmatic choice for teams bridging manual inspection and digital recordkeeping. Contact Metav Werkzeuge today to discuss the Filetta Digital Caliper M909.443 and how its USB data capture and 0.01 mm resolution can be integrated into existing inspection workflows Technical data Article number: M909.443 GTIN: 4061905448850 Manufacturer: Filetta Product: Digital caliper Standard: DIN 862 Facts Measuring range: 0–150 mm Resolution: 0.01 mm Jaw length: 40 mm Power: 1× CR2025 battery Display: Large LCD Data output: USB Special features ABS (absolute) function mm/inch switch and reset button Locking screw Depth gauge function Digital display with on/off switch FAQ Is the caliper compliant with measurement standards? The Filetta Digital Caliper M909.443 is produced to meet DIN 862, ensuring conformity with common workshop metrology practices. What resolution and accuracy can be expected? The caliper offers a resolution of 0.01 mm; for the 0–150 mm range the typical digital error class for this type is ±0.03 mm according to standard digital caliper tolerances. Can the instrument measure depth and step dimensions? Yes. The M909.443 includes a dedicated depth gauge and is suitable for depth and step measurements in addition to inside and outside measurements. How are measurement values exported? Measurements are exported via the USB output, allowing direct transfer of data to inspection software or spreadsheets for traceable documentation. What power source does the caliper require? The instrument is powered by a single CR2025 battery, which is straightforward to replace and provides long standby life. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
150mm Digital Caliper With Carbide Measuring Faces, IP67, Round 1.6mm Depth Gauge, Four‑Function, Supplied In Case - Metav IndustryLine
Benefit from precise inspection with carbide measuring faces, robust IP67 protection and a clear 0.01 mm resolution for consistent workshop results; order the instrument directly via Metav Werkzeuge or consult our technical advisors if specification support is required. Digital Caliper 150 mm (Carbide, IP67) – Metav IndustryLine The Digital Caliper 150 mm is a rugged, IP67-rated measuring instrument with carbide jaws and a rounded 1.6 mm depth rod, designed for standard workshop and quality‑control tasks. IP67 protection for wet and oily environments Carbide measuring faces for high wear resistance 0.01 mm resolution with MODE and SET controls Four measurement modes: external internal depth step Accurate measurements that reduce rework and inspection time The Digital Caliper 150 mm delivers a reliable 0.01 mm resolution and an indicated accuracy of ±0.03 mm, ensuring measurement results that meet typical workshop tolerances under DIN 862. These figures translate into fewer repeat measurements and lower scrap rates: when a verifiable numeric tolerance is available, decisions on acceptance or rework are faster and traceable. The easy-to-read digital display with MODE and SET keys supports fast unit switching and zeroing, so throughput in production control and maintenance checks is improved without additional training. Long service life and protection for harsh conditions Constructed from stainless, hardened steel with carbide measuring faces, the caliper resists wear where contact occurs most, preserving measuring accuracy over time. The IP67 rating protects internal electronics from dust ingress and short-term immersion, making the instrument suitable for machine shops that encounter coolant mist or occasional splash. This robustness reduces total cost of ownership by extending calibration intervals and lowering replacement frequency while maintaining dependable on‑the‑job performance. Versatility across common metrology tasks Equipped for four measurement modes — external, internal, depth and step — the caliper covers the core measurement needs of mechanical workshops and small-series inspection. The rounded 1.6 mm depth rod reaches into shallow bores and recesses with reduced snagging, while the carbide faces provide repeatable contact geometry for serial checks. This functional breadth means fewer specialised gauges are required for everyday tasks, simplifying tool sets and speeding up inspection workflows. Standards compliance and workshop classification With a measuring range of 0–150 mm, the instrument falls into the standard class for calipers: a balance of reach, stiffness and single‑hand operability that suits most metalworking and assembly environments. Compliance with DIN 862 assures adoption into established quality systems, and the compact weight and ergonomic profile support frequent handheld use. For customers seeking traceable calibration, Metav can advise on options that match internal quality procedures and inspection intervals. Contact Metav Werkzeuge in Emmerich to confirm fit‑for‑purpose applications for the Metav IndustryLine digital caliper or to request delivery and documentation details Technical Data Article number: M216.158.N GTIN: 4054469178875 Tariff code: 90173000 Facts Measuring range: 0–150 mm Resolution: 0.01 mm Display inch reading: 0.0005 in Accuracy: ±0.03 mm Weight: 0.4 kg Depth rod diameter: 1.6 mm Special features Protection: IP67 Measuring faces: carbide, hardened Body material: stainless, hardened steel Measurement modes: external, internal, depth, step Standard: DIN 862 Display functions: MODE and SET buttons FAQ Is this caliper suitable for daily workshop use? Yes. The Metav IndustryLine digital caliper M216.158.N is designed for routine workshop and inspection use with durable carbide faces and an IP67 rating for protection against dust and liquid exposure. Which measurement functions are available on the instrument? The instrument provides four measurement modes: external, internal, depth and step measurements, supported by the digital display and MODE/SET controls for quick switching. How precise are the readings and what standard applies? Readings have a resolution of 0.01 mm and an indicated accuracy of ±0.03 mm; the product meets requirements referenced to DIN 862 for calipers in this class. Can the caliper handle mild contamination like coolant mist? With IP67 protection the caliper resists dust ingress and temporary immersion, making it suitable for environments with occasional coolant mist or splashes. What materials are the measuring faces and body made from? Measuring faces are made of carbide for wear resistance; the main body is stainless, hardened steel, providing dimensional stability and longevity. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper With Carbide Measuring Faces, Removable Roller, DIN 862, Three-Point, Plastic Case - Metav IndustryLine
Take advantage of precise workshop measurement, durable carbide contact faces and straightforward digital handling for faster inspection routines; order the instrument directly via Metav Werkzeuge or consult the Metav team for application advice. Digital Caliper M216.088.N by Metav IndustryLine — 150 mm, carbide measuring faces The Digital Caliper M216.088.N is a 150 mm digital caliper for general workshop and metrology use, designed for reliable external, internal, depth and step measurements in accordance with DIN 862. 150 mm measuring range to DIN 862 Carbide measuring faces for wear resistance Four measurement functions: in/out/depth/step Removable thumb roller for fine adjustment Consistent shop-floor accuracy for daily inspection The instrument delivers repeatable measuring results based on a 150 mm measuring range and compliance with DIN 862, making it suitable for the standard needs of machine and metalworking shops. The digital readout is equipped with ON/OFF, ZERO, UNIT and HOLD functions, which simplify task-specific workflows and reduce interpretation time during series checks. By combining a clear display with simple controls, the device supports efficient dimensional checks and speeds up quality-control loops without adding procedural complexity. The compact construction and balanced feel also favour one-handed operation during frequent use. Built to withstand regular use and retain accuracy A hardened stainless steel body with a glass scale slide and carbide measuring faces reduces wear at the contact points and preserves calibration over many cycles. The hardened construction gives structural stiffness that helps maintain measurement reliability across the instrument’s service life; the caliper’s mass of 0.3 kg provides a stable hand feel without excessive weight. The removable thumb roller allows controlled closure of the jaws for delicate parts, preventing over‑stress while enabling fine positional control. These design choices minimise downtime for maintenance and support a consistent inspection routine. Practical features that streamline inspection tasks Four measurement modes (external, internal, depth and step) are integrated into one compact tool, enabling multiple checks with a single instrument and reducing tool changeover. The instrument includes a removable roller for precise feed control and a data interface labelled RB 5 for standardised output options; the combination accelerates data capture and integration into measurement records. Jaw lengths of 40/21 mm suit a wide range of component geometries, from small housings to medium assemblies, offering a pragmatic balance of reach and rigidity for everyday workshop measurement. Contact Metav Werkzeuge for tailored specification advice on the M216.088.N or to arrange supply directly from our Emmerich stock. Technical data Article number: M216.088.N GTIN: 4054469159652 Manufacturer: Metav IndustryLine Label: Digital-Messschieber 150 mm, mit HM-Messflächen, Rolle abnehmbar DIN 862, 3 V Facts Measuring range: 0–150 mm Weight: 0.3 kg Jaw lengths: 40/21 mm Tariff number: 90173000 Special features Material: stainless hardened steel, scale with glass slide Carbide measuring faces Digital display with ON/OFF, ZERO, UNIT and HOLD buttons Four measurement functions: external, internal, depth, step Removable thumb roller for fine adjustment Compliance: DIN 862 Data output: RB 5 Digital instrument FAQ Is this caliper suitable for routine machine‑shop measurements? The caliper is designed for standard workshop use; its 150 mm range and DIN 862 compliance make it well suited to common machine‑shop inspection tasks. Can the device measure internal and depth features as well as external dimensions? Yes — the instrument supports four measurement modes (external, internal, depth and step), enabling versatile use across multiple inspection requirements. What advantage do the carbide measuring faces provide? Carbide measuring faces offer enhanced wear resistance compared with plain steel, helping the caliper maintain accurate contact geometry and extend service life under frequent use. Is the readout suitable for recording measurement data? The digital display includes ON/OFF, ZERO, UNIT and HOLD functions; a dedicated data output RB 5 is provided for integrating readings into documentation systems. How does the removable roller affect measurement handling? The removable thumb roller allows controlled jaw closure for delicate parts and finer adjustments during positioning, improving repeatability when handling small or sensitive components. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper With Fraction Display 0.01mm Resolution, 4-Function Measurement, Stainless Hardened, Supplied In Case - Metav IndustryLine
Take advantage of fast, traceable measurement and clear fraction readout combined with hardened stainless‑steel durability for repeatable workshop results; order the instrument from Metav Werkzeuge or contact our consultants for tailored advice. Digital caliper M216.171 — 150 mm digital caliper with mm/INCH/fraction display (Metav IndustryLine) The Digital caliper M216.171 is a 150 mm workshop caliper designed for precise external, internal, depth and step measurements with an intuitive digital readout and fraction mode for rapid fitting checks 150 mm digital caliper with 0.01 mm resolution mm / INCH / fraction display and function keys Four-measurement: external, internal, depth, step Hardened stainless steel construction for workshop use High-resolution readout for reliable quality control The small-step 0.01 mm readout provides an accurate numeric basis for dimensional decisions in everyday production and inspection tasks. The calibrated numeric increment, paired with a fraction display down to 0.0005" / 1/128", shortens the interpretation time when parts are specified in imperial fractions; this reduces measurement conversion errors and speeds up assembly checks. For machine shops and service departments that rely on quick go/no‑go decisions, the combination of fine resolution and fraction reporting makes the workflow more efficient and less error‑prone. Practical operation and data transfer for process integration An ergonomically arranged digital display with ON/OFF, ZERO and mm/inch/F‑T keys enables fast switching between modes and straightforward zeroing for comparative checks. The caliper also provides an RB 6 data output which facilitates connectivity to SPC systems or handheld loggers; integrating measurement data into production records becomes straightforward, supporting traceability and process documentation. The instrument’s multi‑function display and data interface save time during batch inspections and simplify the transfer of measurement results into quality reports. Built for workshop resilience and universal use Constructed from hardened stainless steel, the gauge resists everyday workshop wear and maintains jaw integrity for repeatable results. With a 0–150 mm measuring range it falls into the standard caliper class, offering an optimal balance of reach and rigidity for general engineering, toolroom and maintenance work. The four‑measurement capability covers external and internal diameters, depths and steps, so one compact tool replaces several specialised gauges — reducing tool changes and storage complexity while increasing measurement versatility. Trust and operational benefits from a seasoned partner Sourcing from a supplier committed to the democratisation of precision ensures consistent availability and a dependable supply chain. The instrument suits production environments where reproducibility and documentation matter; reliable readouts and a data interface help to lower rework rates and provide documented evidence for quality procedures. For workshops and service centres seeking dependable everyday precision, this caliper supports clear, repeatable measurement practices. Contact Metav Werkzeuge for purchase and technical advice — local stock and expert consultancy available from Emmerich to support immediate workshop needs Technical data Article number: M216.171 GTIN: 4054469168999 EClass: 21170344 Data output: RB 6 Facts Measuring range: 0–150 mm Resolution: 0.01 mm / 0.0005" (1/128) Jaw lengths: 40 / 21 mm HS tariff: 90173000 Special features Hardened stainless steel construction Digital display with ON/OFF, ZERO, mm/inch/F‑T keys Four‑measurement capability: external, internal, depth, step Digital instrument with fraction readout and RB 6 interface FAQ What measurements can be taken with this caliper? The caliper supports external, internal, depth and step measurements; the Digital caliper M216.171 provides a single instrument solution for those four common tasks. Is the readout capable of showing fractions for imperial parts? Yes, the instrument displays mm, inch and a fraction mode down to 0.0005" / 1/128", making the caliper suitable for components specified in fractions. Can measurement data be exported to quality software? Measurement values can be transferred via the RB 6 data output for logging and SPC purposes, enabling integration of the caliper’s readings into digital quality workflows. What materials is the caliper suitable for in daily use? The caliper’s hardened stainless steel construction is designed for workshop conditions and repeated use on typical metal and engineering materials encountered in production checks. Which measuring class does this caliper fall into and what does that mean? With a 0–150 mm range the instrument is a standard workshop caliper, offering a balance of reach and stiffness ideal for general machining, maintenance and inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper With Glass Scale Large LCD, mm/inch, ABS-Free, DIN 862 - Filetta
Take advantage of a precise 0–150 mm measuring span together with a 0.01 mm resolution and fast USB data transfer to tighten quality control and reduce recording effort on the shop floor. Order the caliper directly via Metav Werkzeuge or consult the team for specification matching and delivery. Filetta Digital Caliper M909.440 — 0–150 mm, Large LCD and USB output The Filetta Digital Caliper M909.440 is a standard-range digital caliper designed for workshop and machine‑shop measurements, offering fast readout and convenient data transfer for routine dimensional checks. Standard-range 0–150 mm measuring span Resolution 0.01 mm for repeatable readings Large LCD with mm/inch and reset functions USB data output for traceable measurements Confident measurements for everyday workshop control This caliper delivers a reliable combination of reach and stiffness typical for a standard measurement tool: the 0–150 mm span covers the most common workshop tasks while remaining easy to handle with one hand. Compliance with DIN 862 ensures the instrument meets recognised mechanical caliper standards; this provides a clear basis for quality assurance and traceability. The compact jaw geometry and a 40 mm jaw length balance accessibility and rigidity, which helps to keep measurement variation low in serial checks. Fast readout and simple data handling to speed processes A Large LCD and a clear mm/inch switch make readings quick and unambiguous, reducing transcription errors and downtime. The display includes an On/Off control and a reset function for zeroing at any position. For digital documentation, the integrated USB interface transmits measurement values directly to inspection software or spreadsheets, streamlining data capture and enabling easier production logging and statistical evaluation. The 0.01 mm resolution provides the granularity expected in standard industrial quality control. Practical features that support repeatability and ease of use Built for workshop conditions, the tool includes a locking screw to fix the slide during transfer and a dedicated depth gauge for fast depth measurements. Power is supplied by one CR2025 battery, which keeps maintenance straightforward and replacement parts standardised. The construction without ABS electronics mode (Ausführung: Ohne ABS) reduces unnecessary complexity while retaining the essential digital functions. These pragmatic choices reduce handling errors and make the caliper a dependable everyday measuring companion. Choose the Filetta M909.440 via Metav Werkzeuge for robust, traceable standard-range metrology — contact Metav Werkzeuge for technical advice or order assistance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M909.440 GTIN: 4061905448942 Brand: Filetta Standard: DIN 862 Execution: Without ABS ECLASS: 21170344 Digital display type: Large LCD Data output: USB Power supply: 1 × CR2025 battery Measuring range: 0–150 mm Resolution: 0.01 mm Jaw length: 40 mm Depth gauge: yes Locking screw: yes Digital functions: On/Off, mm/inch, reset Facts Measuring range: 0–150 mm Display resolution: 0.01 mm Jaw length: 40 mm Battery type: CR2025 Data interface: USB Special features Large LCD for rapid reading mm/inch conversion and reset button USB data output for traceable transfer Depth gauge integrated for depth checks Locking screw for secure measurement transfer Conforms to DIN 862 standards FAQ What accuracy can be expected from this caliper? The caliper provides a display resolution of 0.01 mm and is manufactured to the mechanical requirements of DIN 862, suitable for standard workshop tolerance checks. Can measurement data be exported directly to a PC? Yes — the M909.440 features a USB data output so measurements can be transferred directly to inspection software or spreadsheets for traceability. What power source does the instrument use and is it easy to replace? Power is supplied by one CR2025 battery; replacement is simple and uses a commonly available battery type. Is the caliper suitable for routine machine‑shop use? The Filetta Digital Caliper M909.440 is designed as a standard‑range tool (0–150 mm), making it well suited for daily dimensional checks and workshop quality control. Does the instrument include a depth measurement function? Yes, the caliper includes an integrated depth gauge in addition to the sliding jaws and locking screw for secure, repeatable measurements. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
150mm Digital Caliper With Locking Throttle, mm/inch Display, On/Off And Zero, Four-Function Measurement, Hardened Stainless Steel, Case - Metav IndustryLine
The combination of a 0.01 mm resolution, robust hardened stainless steel construction and reliable moment locking makes this caliper a practical choice for consistent workshop and inspection routines. Order the instrument directly via Metav Werkzeuge or contact our consultants for integration advice. M216.081 Digital Caliper — 150 mm, moment locking (Metav IndustryLine) The M216.081 is a 150 mm digital caliper designed for workshop measurement and quality control, featuring mm/inch readout, zeroing and a moment locking mechanism for repeatable results 150 mm hardened stainless steel frame Digital readout 0.01 mm resolution mm/inch Moment locking for repeatable measurements Four measurement modes: internal, external, depth, step High-precision measurements that support quality decisions This digital caliper delivers a 0.01 mm resolution and is manufactured to DIN 862 guidance, offering the accuracy expected in standard machine‑shop and inspection tasks. The integrated moment locking holds the slider at the chosen position, reducing variation caused by hand pressure and improving repeatability when transferring measurements between workpiece and documentation. The instrument supports four measurement modes — internal, external, depth and step measurement — enabling a single tool to cover routine dimensional checks without frequent tool changes. These features translate directly into faster inspection loops and fewer reworked parts. Built for everyday workshop robustness and handling Constructed from hardened stainless steel, the caliper tolerates workshop environments while resisting corrosion for long service life. The jaw geometry (40/21 mm) provides sturdy contact for both outside and inside measurements, and the instrument’s compact mass of 0.48 kg keeps handling comfortable during extended use. The balanced weight and ergonomic slider ensure steady alignment on longer runs, helping to preserve measurement integrity across batches. This combination of durability and practical ergonomics reduces maintenance overhead and keeps the tool available where it is needed most. Digital connectivity and error‑reducing workflow benefits The instrument features a clear digital readout with on/off, zero and mm/inch switching for straightforward operation and quick unit conversion. A dedicated RB 1 data output allows transfer of measured values into data‑collection systems or SPC software, cutting transcription errors and accelerating reporting. For laboratories and production lines that require traceable records, the ability to export readings directly from the caliper supports consistent documentation. Integrated digital functionality therefore not only speeds measurement tasks but also strengthens process reliability across inspection and production workflows. Contact Metav Werkzeuge for a tailored quotation or technical guidance on the M216.081; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M216.081 GTIN: 4054469168371 Manufacturer: Metav IndustryLine Norm: DIN 862 Data output: RB 1 Facts Measurement range: 0–150 mm Resolution: 0.01 mm Inch resolution: 0.0005 in Weight: 0.48 kg Jaw length: 40/21 mm Tariff number: 90173000 Special features Material: hardened stainless steel Display: on/off, zero, mm/inch Measurement modes: internal, external, depth, step Moment locking mechanism Digital instrument with data output RB 1 FAQ What accuracy can be expected from this caliper? The M216.081 digital caliper provides a resolution of 0.01 mm and is manufactured to DIN 862, delivering the repeatability and accuracy suitable for workshop quality control. Which measurement types are supported? The instrument supports four measurement modes: external and internal diameters, depth measurement and step measurement, enabling versatile inspection tasks with a single tool. Is the caliper suitable for wet or oily workshop environments? Yes, the hardened stainless steel construction improves resistance to corrosion and wear, making it appropriate for typical workshop conditions where moisture or light contaminants may be present. Can measurement values be exported to a PC or SPC system? Yes, the caliper includes an RB 1 data output that allows direct transfer of readings into data acquisition or SPC software, reducing manual transcription and supporting traceable records. Does the instrument include a locking mechanism for consistent readings? The M216.081 features a moment locking device that secures the slider position, improving repeatability when taking or transferring measurements. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper With Removable Roller Large LCD, Metal Housing, DIN 862, IP Without - Metav IndustryLine
Combining a hardened stainless steel construction with a large LCD and a removable drive roller, this caliper delivers dependable, flexible measuring for everyday workshop control. Benefit from four measuring modes and DIN 862 conformity for standardised inspection processes — order directly via Metav Werkzeuge or contact our consultants for tailored advice. Digital Caliper M216.125.N (150 mm) — Hardened stainless steel, removable drive roller (Metav IndustryLine) A precise workshop measuring instrument, the Digital Caliper M216.125.N offers a 150 mm range with a large digital display and a removable drive roller for versatile part inspection. Large high-contrast LCD display Hardened stainless steel construction Removable drive roller included Four measurement functions (inside/outside/depth/step) Reliable results for routine quality control The robust digital caliper is built for repeatable workshop inspection and inline quality checks. With a hardened stainless steel frame and a glass scale, the instrument resists wear and maintains geometry over frequent use, which reduces measurement drift and repeat inspections. The clear large LCD display with ON/OFF, ZERO, UNIT and HOLD keys speeds up read‑out and data capture, shortening inspection cycles and improving throughput. Designed for flexible measurement tasks Four measurement modes cover the majority of workshop needs: outside, inside, depth and step measurements are enabled by the jaw geometry and the slender depth beam. The removable drive roller extends capability to cylindrical and stepped parts, while the compact jaw profile (40/21 mm) helps reach confined features. These design choices translate into fewer tool changes and faster inspection of mixed batches. Durable electronics and practical data transfer Electronics are housed in a metal case to protect the readout from shop-floor impacts, and the unit includes an RB 5 data output suitable for connection to data loggers and measurement software. Robust construction and reliable output options support traceable processes and reduce transcription errors in inspection reports, improving documentation speed and audit readiness. Simple operation that improves efficiency Operation is intentionally uncomplicated: ON/OFF, SET ZERO, UNIT selection and a HOLD function keep the learning curve short for production staff. This simplicity, combined with the instrument’s ergonomic feel and low weight (0.4 kg), supports one-handed checking and boosts inspection cadence without sacrificing control or precision. Contact Metav Werkzeuge today for advice on integrating the M216.125.N digital caliper into production workflows and to discuss sample inspection needs with our Emmerich specialists Technical data Article number: M216.125.N GTIN: 4054469159676 Brand: Metav IndustryLine Category: Calipers Norm: DIN 862 Core specifications Measuring range: 0–150 mm Weight: 0.4 kg Jaw length: 40/21 mm Power: 3 V Tariff number: 90173000 Special features Stainless hardened steel body Glass scale, electronics in metal housing Large LCD with ON/OFF, ZERO, UNIT, HOLD Removable drive roller (pass piece included) Four measurement functions: inside, outside, depth, step DIN 862 compliant RB 5 data output FAQ Is this caliper suitable for everyday workshop inspections? The M216.125.N digital caliper from Metav IndustryLine is designed for routine workshop use, offering a 150 mm range, hardened stainless construction and a large display for rapid checks. Which measurement types does the instrument support? This caliper supports four measurement types: outside, inside, depth and step measurements, enabling versatile inspection of diverse components. How does the removable drive roller improve measurement? The removable drive roller supplied with the M216.125.N facilitates measurement of cylindrical and stepped features; the roller can be fitted or removed depending on the task. What materials and construction ensure durability? Hardened stainless steel construction, a glass scale and electronics housed in a metal case give the M216.125.N resilience against everyday shop-floor wear. Is there a data output for documentation? Yes; the instrument provides an RB 5 data output for transfer of readings to compatible data collectors and inspection software. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper With Roller, Digital Readout, Four‑Function Measurement, Glass Scale, Hardened Stainless Steel, DIN 862, Supplied In Case - Metav IndustryLine
Take advantage of a compact, workshop-ready measuring tool that combines a 150 mm measuring range, a hardened stainless steel construction and a roller option for extended or driven measurements. The combination of a clear digital display (ON/ZERO/UNIT/HOLD), DIN 862 conformity and a dedicated data output ensures fast integration into inspection routines — order the instrument directly via Metav Werkzeuge or consult the team for application advice. Digital caliper M216.087.N — 150 mm measuring range, roller-equipped A Digital caliper M216.087.N designed for standard workshop and inspection tasks, offering precise four-way measurement and a roller option for workpiece feeding and driven setups. Digital display with ON/ZERO/UNIT/HOLD keys Hardened stainless steel with glass scale 150 mm measuring range, DIN 862 compliant Four-function measurement: inside/outside/depth/step Precision that fits the workshop This caliper is a standard-range instrument optimised for everyday tasks in machine and metal workshops. With a measuring range of 0–150 mm, the device balances reach and stiffness to deliver repeatable results on parts, fixtures and housings. The digital display offers a conventional 0.01 mm resolution typical for devices of this size, supporting rapid readings and reducing interpretation errors. Conformity with DIN 862 underlines the metrological basis for routine quality checks and process control. Robust construction and versatile measuring modes Engineered from hardened stainless steel with a glass scale, the caliper withstands shop-floor handling while maintaining dimensional stability. Jaws are specified at 40/21 mm for accessible gripping and fine engagement on edges. The instrument provides four-way measurement — outside, inside, depth and step — so one tool covers multiple measuring tasks. A roller is included and the caliper can be used with or without the drive roller (a pass piece is supplied), enabling measured feeding of profiles or integration with simple inspection jigs. Data-ready for traceable inspection A dedicated RB 5 data output allows measured values to be transferred to test benches or data loggers, simplifying digital documentation and reducing transcription errors. The front-panel keys (ON/ZERO/UNIT/HOLD) permit quick unit switching, datum setting and temporary reading lock. At approximately 0.3 kg, the caliper is easy to handle while offering the mass needed for steady manual operation. The tool is supplied in a protective transport case to safeguard accuracy during transit and storage. Workflow benefits and suitability By combining a clear electronic readout, hardened materials and a practical roller option, the instrument shortens inspection cycles and lowers the risk of measurement variability. For standard quality checks and workshop tasks where speed and reproducibility matter, this caliper streamlines work without requiring complex equipment changes. The compact format and data connectivity make it suitable for bench inspectors, toolroom staff and production technicians seeking reliable, auditable results. Choose the Metav IndustryLine digital caliper for dependable workshop precision and contact Metav Werkzeuge in Emmerich for expert ordering guidance or application advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M216.087.N GTIN: 4054469159614 Manufacturer: Metav IndustryLine Facts Measuring range: 0–150 mm Weight: 0.3 kg Jaw lengths: 40 / 21 mm Power supply: 3 V Tariff number: 90173000 Special features Hardened stainless steel body, glass scale Digital display with ON/ZERO/UNIT/HOLD functions Roller included; usable with or without drive roller (pass piece supplied) Four-way measurement: outside, inside, depth, step DIN 862 compliant Data output: RB 5 Supplied in a protective transport case FAQ What measuring tasks is this caliper best suited for? The caliper is ideal for standard workshop and inspection tasks where a 0–150 mm range covers parts, fixtures and housings; its four measurement modes support outside, inside, depth and step checks. Does the instrument support digital data transfer? Yes — the device provides an RB 5 data output for connecting to data loggers or inspection software to simplify documentation. What material and scale construction does the caliper have? The caliper is made from hardened stainless steel with a glass scale, offering robustness and stable graduation for repeatable readings. Is a roller supplied and how is it used? A roller is included and the caliper can be used with or without the drive roller; a pass piece is supplied for applications that require measured feeding or driven measurement setups. How is the display operated and what functions are available? The digital readout features ON, ZERO, UNIT and HOLD functions for unit switching, datum setting and frozen readings, enabling efficient capture of measurement values. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper With Round Measuring Face, Removable Roller, 4‑Function, DIN 862 - Metav IndustryLine
Take advantage of a compact 150 mm measuring range combined with DIN 862 conformity and versatile measurement modes for reliable workshop quality control; the removable roller and clear digital controls ensure fast, reproducible readings. Order directly via Metav Werkzeuge or consult our specialists for application advice. Digital Caliper M216.085.N (150 mm) — Removable roller, DIN 862 — Metav IndustryLine The Digital Caliper M216.085.N is a 150 mm digital measuring instrument designed for workshop and quality‑control applications, offering external, internal, depth and step measurements in accordance with DIN 862. 150 mm measuring range, DIN 862 compliant Four measurement modes: external, internal, depth, step Removable measuring roller and 3 V battery operation Hardened stainless steel body with glass scale Precise everyday measuring with robust construction The caliper combines a hardened stainless steel frame with a glass scale to deliver stable guidance and long service life in a busy workshop environment. The medium‑format measuring range classifies this instrument as standard (100–300 mm), which balances reach and rigidity for common machine‑shop tasks; this means a single instrument handles typical component dimensions while remaining easy to operate with one hand. The robust build reduces torsion and wear, translating into consistent readings over prolonged use. Clear digital operation and repeatable data capture A clear digital display with ON/OFF, ZERO, UNIT and HOLD functions provides straightforward, rapid measurement workflows and reduces transcription errors. The caliper offers a removable measuring roller for special transfer or rolling measurements and includes a data output (RB 5) for integration into inspection stations or data‑logging systems, enabling traceable documentation and faster quality processes. These features support efficient inspection routines and improve throughput where many measurements are recorded. Four‑way measuring capability explained for practical use Equipped for external, internal, depth and step measurements, the instrument covers the four most commonly required tasks without the need to swap tools. External jaws measure outer diameters and widths, the internal jaws reach bores and grooves, the depth probe checks recesses and blind holes, and the step faces are used for offsets and shoulders. This versatility reduces equipment changes, streamlines setup, and helps maintain measurement consistency across assembly and QC operations. Designed for workshop integration and durability The caliper follows DIN 862 guidelines and incorporates practical design choices that support daily shop use: a hardened sliding surface for wear resistance, an ergonomic jaw geometry with a long and short beak arrangement (40/21), and a compact package weight of 0.4 kg that balances solidity with handling comfort. The instrument is digital and fitted with a 3 V power source for low maintenance, while its readable scale and secure locking enable repeatable part checks on the bench or at the machine. Choose the Metav IndustryLine digital caliper for dependable, workshop‑ready precision and contact Metav Werkzeuge for tailored advice — info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: M216.085.N GTIN: 4054469159645 HS code: 90173000 Facts Measuring range: 0–150 mm Weight: 0.4 kg Measuring jaw length: 40/21 mm Special features Material: hardened stainless steel; scale with glass slide Measurement functions: external, internal, depth, step Digital display with ON/OFF, ZERO, UNIT, HOLD Removable measuring roller Data output: RB 5 Standard: DIN 862 Depth gauge included FAQ How versatile is this caliper for workshop tasks? The Metav IndustryLine digital caliper M216.085.N supports four measurement modes—external, internal, depth and step—making it suitable for a wide range of routine machine‑shop and assembly inspections. Is the instrument compatible with data‑logging systems? Yes, the caliper provides a data output (RB 5) for connection to inspection software or measurement data recorders, facilitating digital traceability. What material and durability features does the caliper offer? The measuring tool is made from hardened stainless steel with a glass scale, designed to resist wear and maintain stable guidance under normal workshop conditions. Does the caliper meet recognised standards? The instrument is manufactured to comply with DIN 862, ensuring conformity with common workshop measuring practices and expectations. What power source and display functions are included? The caliper operates from a 3 V battery and features an easy‑to‑use digital display with ON/OFF, ZERO, UNIT and HOLD keys for flexible measurement routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper With TiN-Coated Stainless Steel Body, Three-Point Measurement, Data Output RB5, In Metal Case - Metav IndustryLine
Take advantage of a robust TiN-coated measuring scale, a metal-housed display for workshop durability and a RB 5 data interface to streamline documentation; order the caliper directly via Metav Werkzeuge or contact the consultants for application advice. Digital caliper 150 mm — TiN-coated metal housing (Metav IndustryLine) The Digital caliper 150 mm is a compact precision measuring instrument for workshop and inspection use, offering a hardened stainless-steel scale with TiN coating and an all-metal electronics housing for reliable daily operation. TiN-coated stainless steel scale Metal housing for durable electronics RB 5 data output for digital logging Consistent, DIN‑compliant precision for workshop quality control The caliper complies with DIN 862, delivering repeatable measurements within the expectations for standard workshop verifications. The hardened stainless steel construction and TiN-coated measuring faces reduce wear and maintain contact geometry over time, which preserves accuracy under regular use. The instrument’s form factor and balance support quick comparisons and alignment checks in production or inspection routines, making it a rational choice where traceable, repeatable results are required. Built to withstand daily workshop handling A robust metal housing shields the electronics from shocks and chips that occur in busy environments, while the glass scale maintains readable graduations beneath the protective coating. Classified in the Standard measuring range (max 100–300 mm), this caliper combines reach and stiffness for general machine‑shop tasks. The lightweight construction supports comfortable one‑hand operation and the device is supplied in a dedicated transport case, ensuring safe storage and shipping between job sites. Fast data capture and flexible measurement modes Equipped with RB 5 data output and powered by a 3 V system, the caliper integrates into digital logging workflows to reduce transcription errors and speed up quality documentation. The display provides ON/OFF, ZERO, UNIT and HOLD functions for intuitive operation and controlled readings. Four measurement modes are available — outside, inside, depth and step — enabling the four-way measurement capability that covers most workshop measurement tasks. Delivery includes a pass piece so the caliper can be used with or without the drive roller for specific measuring procedures. Suited for technicians, toolrooms and incoming inspection This precision measuring tool is ideal for machinists, maintenance engineers and quality inspectors who require a dependable instrument for everyday measurements. The combination of wear-resistant coating, metal electronics housing and digital output supports efficient quality workflows and reduces the effort of data capture. Metav’s product range is designed to make professional measuring tools accessible to workshops and small manufacturers, providing a pragmatic solution where accuracy and traceability matter. Contact Metav Werkzeuge for a technical consultation or to request a specification sheet for the Metav IndustryLine digital caliper; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M216.129.N GTIN: 4054469160061 Label: Digital-Messschieber 150 mm, Metallgehäuse, TiN-beschichtet, 3 V INOX, DIN 862 SKU: M216.129.N Facts Measuring range: 0–150 mm Maximum measuring range: 150 mm Weight: 0.38 kg Jaw length: 40/21 mm Tariff number: 90173000 Special features TiN-coated measuring faces Hardened stainless-steel scale with glass rail Electronics in metal housing Digital display with ON/OFF, ZERO, UNIT, HOLD buttons RB 5 data output interface 3 V measuring system Four-way measurement: outside, inside, depth, step Usable with or without drive roller (pass piece included) Supplied in a transport case Conforms to DIN 862 FAQ What measurement modes does the caliper support? The caliper supports outside, inside, depth and step measurements via its four-way measurement capability, enabling a wide range of inspection and workshop tasks. Is the instrument suitable for daily shop-floor use? Yes. The TiN-coated scale and metal electronics housing make the instrument robust enough for routine workshop exposure while maintaining measurement stability. How is measurement data transferred to documentation systems? Data is output via the RB 5 interface; the caliper’s RB 5 connection allows integration with data loggers and quality-control systems for reliable digital recording. Does the caliper meet any standards for accuracy? The instrument is manufactured to meet DIN 862, ensuring conformity with recognised caliper accuracy requirements for workshop and inspection use. What is included with delivery? The Metav IndustryLine digital caliper (M216.129.N) is supplied with a pass piece for use with or without the drive roller and is packaged in a transport case for safe storage and shipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Messschieber mit Messkraftkontrolle, 0,005mm Auflösung, IP54, ISO17025 Kalibrierzertifikat - Microtech Metrology
Introducing the Caliper — digital caliper by Microtech Metrology The Caliper is a digital measuring instrument for precise length checks up to 150 mm, designed for workshop and production environments. DataMet E‑Force caliper with 0.005 mm reading Wireless and USB data transfer E‑Force control 1–20 N with AUTO‑Force Hand‑finished stainless steel measuring faces Calibration certificate ISO 17025 included Precision and reproducibility for daily quality control High repeatability is essential in production. The instrument uses the DataMet E‑Force concept and a MICS system microcontroller to deliver a stable reading with selectable resolution down to 0.005 mm. The integrated E‑Force control allows a defined measuring force between 1 and 20 N so that measurements are taken only when the preset force is reached, avoiding operator‑dependent deviations. This controlled force ensures that each measurement is comparable and reduces rework caused by inconsistent contact pressure. Effortless data flow without extra connectors Data transfer has been simplified compared with other solutions: Microtech’s wireless implementation is intentionally easier than the U‑WAVE technology from Mitutoyo — only one dongle is needed for PC reception while transfers to iPhone, iPad and Android devices occur directly from the measuring tool. The device supports Wireless HID, Wireless to the MDS app (Windows, Android, iOS, macOS) and USB-C HID, enabling direct input to spreadsheets or quality systems. This removes intermediate steps and speeds up documentation workflows. Robust construction for everyday workshop use Components that survive daily handling pay off over time. The caliper features stainless steel construction with hand‑finished measuring surfaces (Ra < 0.32 μm) and an IP54 rating, balancing durability and portability. A compact Color 1.5" Touchscreen gives clear readout and quick access to functions such as Go/NoGo, Max/Min and statistical modes. The built quality supports stable readings across shifts and environments without frequent recalibration. Clear memory and functional tools for measurement tasks Measurements can be stored and analysed on the instrument: the built‑in memory manager holds up to 1000 values with folder organisation and statistics, and memory data transfer is supported. Useful built‑in functions include Formula, Timer, Peak, Limits and Linear/Thermal correction, which reduce the need for external calculation and help integrate the caliper directly into inspection routines. For traceability, a Calibration Certificate ISO17025 is supplied with the instrument. Where this caliper fits in your toolset This device belongs to the small/standard class of calipers (≤ 150 mm) and is a universal companion for mechanical workshops, maintenance and production where quick, reproducible checks are required. It suits users who need reliable hands‑on measurement with immediate digital documentation and those integrating measuring data into production or QC systems. The adjustable measuring force is beneficial when probing soft or finished surfaces that react to higher pressure. For demanding measurement tasks choose Microtech Metrology’s Caliper for controlled, traceable results — METAV Werkzeuge provides competent advice and support if you are unsure whether this tool fits your requirements: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Bezeichnung: Caliper Marke: Microtech Metrology SKU: 141077015A Product Line: DataMet E‑Force caliper with computerized MICS system and hi‑res 1.54" colour touchscreen Patents: US10184772, UA174949, UA126928 Reading System Resolution: 5 micron (0.005 / 0.01 / 0.1 mm selectable) Measuring Range: 0–150 mm Resolution: 0.005 mm Jaw Length: 40/16 mm Measuring Force: 1–20 N (adjustable), AUTO‑Force mode, force indication Functions: Go/NoGo, Max/Min, Formula, Timer, Linear correction, Temperature correction, Resolution selection, Connection indication, Peak, Limits, FW update, Manual temperature compensation Memory: 1000 values with folders, statistics, memory data transfer Data Transfer Modes: Wireless to MDS app (Windows, Android, iOS, macOS); Wireless HID; Wireless HID+MAC; USB HID; MODBUS RTU (modifications) HUB Connection: HUB (2D, Probe) synchronization (Slave/Master device) Display: Color 1.5" Touchscreen Battery: Rechargeable Li‑Pol 300 mAh, USB‑C charging/data socket Surface Finish: Hand‑finished measuring surfaces Ra < 0.32 μm Protection Class: IP54 Calibration Certificate: ISO17025 (Ilac MRA) included Availability: in Stock; Condition: new Data Output: Wireless + USB Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What measuring range does the Caliper from Microtech Metrology cover? The Caliper by Microtech Metrology is specified for a measuring range of 0–150 mm, making it a standard workshop caliper suitable for common mechanical parts and assembly checks. How is data transferred from the Caliper by Microtech Metrology to a PC or smartphone? Data transfer from the Caliper by Microtech Metrology is available via Wireless to the MDS app (Windows, Android, iOS, macOS), Wireless HID modes and USB HID over the USB‑C socket; PC reception needs only one dongle while smartphone transfers occur directly from the instrument. Can the measuring force be adjusted on the Microtech Metrology Caliper? Yes, the Microtech Metrology Caliper includes an E‑Force control allowing the measuring force to be set between 1 and 20 N; measurements are recorded when the set force is reached, ensuring consistent contact pressure. Does the Caliper from Microtech Metrology come with a calibration certificate? The Caliper by Microtech Metrology is delivered with an ISO17025 (Ilac MRA) calibration certificate, enabling documented traceability for quality management systems. Who can I contact for technical advice about the Microtech Metrology Caliper? If you are unsure whether the Microtech Metrology Caliper meets your needs or require further technical details, METAV Werkzeuge offers comprehensive, expert consultation — email info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271.
150mm Digital Pocket Caliper Three-Point, 0.01mm Resolution, RS232C Output, Supplied in Case - Metav IndustryLine
Compact, robust and ready for integration: the caliper combines 0.01 mm resolution, a hardened stainless steel construction and an RS232C data interface for reliable shop-floor measurement and simple data logging. Order the digital pocket caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital pocket caliper »Digital‑Taschen‑Messschieber, schwarz« — pocket caliper with RS232 data output A Digital pocket caliper, black, designed for portable precision measuring across workshop and inspection tasks, combining compact format with a clear display and data connectivity. Compact pocket format for mobile measuring 0.01 mm resolution for standard workshop control RS232C output for data logging and traceability Delivered in a transport box for safe storage Precision and portability for routine measurement tasks The compact digital caliper is built to bring reliable, repeatable results to everyday workshop measurement. With a resolution of 0.01 mm and a clear display with 12 mm digit height, read‑outs are quick and unambiguous — reducing reading errors during repetitive checks. The caliper’s hardened stainless steel jaws and beam resist wear and provide mechanical stability; this material choice supports long term dimensional stability and helps maintain calibration intervals. The lightweight design (approx. 0.3 kg) and pocket format make the tool suitable for mobile inspections where access and handling matter. Seamless documentation and integration for quality processes Equipped with an RS232C (RB2) data output, the instrument enables direct transfer of measurement values to data collection systems or inspection software. This connectivity supports quality processes that require traceable records or statistical process control, reducing manual transcription and associated errors. The display features mm/inch toggle and dedicated zero and on/off controls, streamlining measurement workflows and allowing swift switching between unit systems without extra calculation. Versatile measuring functions for common workshop needs This pocket caliper performs four fundamental measurement modes — external, internal, depth and step measurements — so it covers the typical checks required in metalworking and assembly. The combination of a compact jaw geometry and hardened contact surfaces allows access to small features while retaining repeatability. For routine parts inspection and quick setup checks, the instrument provides a practical balance of reach and manoeuvrability. Practical protection and workshop readiness The device is supplied in a transport box for protection during storage and transit, helping prevent knocks and contamination that could affect accuracy. The robust surfaces and compact form factor reduce susceptibility to damage when carried in pockets or toolkits, and the easy‑to-read digits speed up inspection cycles. Where traceability is required, data logging via RS232C simplifies the creation of measurement records without additional adapters. For tailored advice and immediate availability, contact Metav Werkzeuge in Emmerich — Metav’s specialists can confirm stock, compatibility with inspection systems and ordering options for this Metav IndustryLine caliper (SKU M216.086) — call +49 2822 7131930 or email info@metav-werkzeuge.com. Technical data SKU: M216.086 GTIN: 4061905082559 Manufacturer: Metav IndustryLine Facts Resolution: 0.01 mm Display digit height: 12 mm Weight: 0.3 kg Data output: RS232C (RB2) Special features Material: hardened stainless steel Measuring modes: external, internal, depth, step (4‑way measurement) Display functions: on/off, zero, mm/inch Delivery: transport box (plastic or wooden box) FAQ How accurate is the measurement from this digital pocket caliper? The caliper offers a resolution of 0.01 mm, suitable for standard workshop control and routine inspection tasks; accuracy depends on application and handling. Can measurement values be exported directly to a computer? Yes — the unit has an RS232C (RB2) data output for direct transfer of readings to compatible data collection systems. Which measurement types are supported by this caliper? The instrument supports four measurement types: external, internal, depth and step measurements, making it versatile for general workshop use. Is the caliper protected for transport? The caliper is supplied in a transport box to protect the instrument during storage and transit. What material are the jaws and beam made from? The caliper is manufactured from hardened stainless steel, chosen for wear resistance and stability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Precision Caliper Absolute ABS System Removable Thumb Roller, 0.01mm Resolution, 4‑Function, DIN 862 - Metav IndustryLine
Take advantage of a compact, 150 mm absolute measuring system with 0.01 mm resolution and a removable thumb roller for efficient one‑hand operation; the hardened stainless steel construction with a glass scale ensures stable readings across routine shop work. Order the digital caliper directly via Metav Werkzeuge or consult the specialists for specification matching. Digital caliper M216.235.N — 150 mm ABS system, removable thumb roller (Metav IndustryLine) The Digital caliper M216.235.N is a 150 mm absolute digital caliper designed for production and workshop measurement tasks, combining robust materials with a practical thumb roller for fast positioning. Absolute measuring system ABS, 150 mm range 0.01 mm resolution with ORIGIN/UNIT/ON/OFF/0/ABS Removable 3 V thumb roller for easy handling Hardened stainless steel with glass scale Reliable metrology for everyday quality control The caliper uses an absolute measuring system powered by a 3 V cell, providing stable zero reference and repeatable readings without the need for re‑zeroing after power loss. With a resolution of 0.01 mm (0.0005 in) and conformity to DIN 862, the instrument fits the requirements of standard workshop and machine‑shop inspection tasks; measured values are clear and comparable, which supports process documentation and reduces rework in the production chain. Designed to speed up routine tasks A removable thumb roller and compact weight (0.35 kg) make this gauge well suited to repetitive measurements and single‑hand operation on the shop floor. The digital display includes ORIGIN, UNIT, ON/OFF and 0/ABS controls for flexible handling of measurement modes, while the RB 5 data output enables transfer to data collectors or inspection software where applicable, improving traceability and saving time in logging values. Robust construction for consistent results Built from hardened stainless steel with a glass scale, the caliper resists wear and maintains scale integrity during daily use; this material choice also supports stable sliding action and low thermal distortion. The jaw geometry (40/21 mm) balances reach and stiffness, so critical measurements remain reproducible across the full 150 mm range even under workshop conditions. Versatility across measurement types This gauge supports the four classic caliper functions — inside, outside, depth and step measurements — so it replaces multiple single‑purpose tools in routine inspection. The absolute system and clear numeric display make measurement interpretation straightforward for operators with mixed experience levels, reducing uncertainty in assembly and maintenance tasks. Choose the Metav IndustryLine digital caliper for dependable shop measurement and contact Metav Werkzeuge for application advice or ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M216.235.N GTIN: 4054469159355 Label: Digital caliper, 150 mm, ABS system, removable 3 V thumb roller Norm: DIN 862 Data Measuring range: 0–150 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.35 kg Tariff number: 90173000 eCl@ss: 21170344 Special features Material: hardened stainless steel, scale with glass slide Measuring system: absolute measuring system, 3 V Digital display: ORIGIN, UNIT, ON/OFF and 0/ABS buttons Measurement capabilities: inside, outside, depth and step Data output: RB 5 Removable thumb roller for assisted feed Supplied in a plastic or wooden case for transport FAQ What measurement accuracy can be expected with this caliper? The M216.235.N delivers a resolution of 0.01 mm; as a DIN 862 conforming digital caliper it meets the standard accuracy expectations for workshop and production use. Does the instrument support data transfer to inspection systems? Yes, the caliper is equipped with an RB 5 data output to allow measurement values to be exported to compatible data collection devices. Which measurement types are possible with this instrument? The device performs inside, outside, depth and step measurements, offering the four standard caliper functions required in general inspection tasks. Is the caliper suitable for continuous shop‑floor use? Constructed from hardened stainless steel with a glass scale and featuring a removable thumb roller for ergonomic handling, the gauge is engineered for regular workshop operation. How is the caliper supplied for transport and storage? The caliper is supplied in a plastic or wooden case to protect the instrument during transport; the case is intended for transit rather than long‑term workshop storage. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Precision Caliper Extra Thin Jaws 0.01mm Resolution Four‑Function Measurement, Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of high-resolution measurement, a slim jaw geometry for delicate features and reliable RB 5 data output for process integration; these attributes support efficient quality control and reproducible results. Order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Digital Precision Caliper 150 mm (extra-thin jaw) — Metav IndustryLine, 0.01 mm resolution The Digital Precision Caliper 150 mm is a compact, workshop-grade measuring instrument for precise external, internal, depth and step measurements in metalworking and general engineering. 0.01 mm resolution with 0.03 mm accuracy Extra-thin 40 mm jaws for fine features Stainless hardened steel construction RB 5 data output for process integration Precision where repeatability counts The caliper offers 0.01 mm resolution with a stated accuracy of 0.03 mm, providing a reliable balance between fine measurement and robustness required on the shop floor. The instrument’s measuring range classifies it as a standard caliper (0–150 mm), which is the preferred length for everyday tasks in machining and metal fabrication because it combines reach with good stiffness. The slender 40 mm jaws make it straightforward to measure narrow grooves and small radii without compromising the sliding stability that underpins repeatable results. Workflows simplified by digital features A clear digital display with ON/OFF, ZERO, UNIT and HOLD keys reduces handling time and measurement errors when switching between metric and imperial units (display inch resolution 0.0005 in). The caliper is equipped with RB 5 data output, enabling direct connection to logging systems or SPC equipment for rapid documentation and process control. The electronic readout and simple control layout support faster inspection loops, which translates into fewer interruptions and higher throughput during batch checks. Versatile measuring functions for diverse applications This digital caliper supports 4-way measurement: external, internal, depth and step — a single tool that replaces multiple gauge types for many routine checks. Constructed from hardened stainless steel with a metal housing, the instrument withstands workshop conditions while retaining measurement stability. The slim-jaw geometry is particularly suited to fine mechanical work, such as small components and assemblies, where accessibility and minimal interference are essential. Built for everyday use and transport Weighing approximately 0.4 kg, the caliper is light enough for handheld use yet substantial enough to avoid unwanted flex during careful measurement. Delivered in a protective case for transport, the tool remains secure between jobs and during transit. The factory-standard build and finishing reflect Metav IndustryLine’s emphasis on reliable supply: products are filtered and distributed from Emmerich to support consistency across workshops and small series production. Contact Metav Werkzeuge today to discuss application suitability and integration with existing inspection workflows — Metav’s specialists will advise on data connectivity and measurement strategy Technical data SKU: M240.014.N GTIN: 4054469160283 Category: Messschieber / Precision calipers Facts Measuring range: 0–150 mm Resolution: 0.01 mm Inch resolution: 0.0005 in Accuracy: 0.03 mm Weight: 0.4 kg Jaw length: 40 mm Power: 3 V battery Data output: RB 5 eClass: 21170344 Special features Digital display with ON/OFF, ZERO, UNIT and HOLD functions Hardened stainless steel construction with metal housing Extra-thin jaw geometry for fine-feature access Four-way measurement: external, internal, depth, step Delivered in protective case for transport Factory standard specification (Werksnorm) FAQ What is the smallest increment the display shows? The display provides a resolution of 0.01 mm (0.0005 in), enabling fine readings suitable for standard workshop inspection. Is the caliper suitable for internal and depth measurements? Yes, the instrument supports internal, external, depth and step measurements (four-way measurement) for versatile inspection tasks. How is measurement data exported? This caliper is fitted with an RB 5 data output for wired data transfer to recording devices or SPC systems. What material and finish does the caliper have? The caliper is made from hardened stainless steel with a metal housing, combining corrosion resistance with mechanical stability. Is the tool supplied ready for transport? The caliper is supplied in a protective case for secure transport between job sites and for storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Precision Caliper Fibreglass Body 0.01mm Resolution, With On/Off, Zero And Mm/Inch Functionality - Metav IndustryLine
Benefit from a lightweight fibreglass construction and a clear digital display with 0.01 mm resolution for dependable workshop measurements; the compact 150 mm range combines reach and stiffness for everyday machine‑shop tasks. Order directly via Metav Werkzeuge or consult our technical team for specialist advice. M216.070 Digital Caliper — 150 mm Fibreglass, 0.01 mm resolution The M216.070 Digital Caliper is a 150 mm fibreglass-bodied digital caliper designed for routine measurement and quality control tasks in workshops and light industrial settings. Lightweight fibreglass body, corrosion resistant Digital display with 0.01 mm resolution Integrated mm/inch and zero functions 150 mm measuring range, workshop standard Reliable accuracy for routine workshop control The fibreglass frame delivers a rigid yet lightweight measuring instrument that reduces the risk of corrosion and keeps operator fatigue to a minimum. The combination of a 150 mm measuring range and a 0.01 mm display step offers a pragmatic balance between reach and resolution, making the caliper suitable for standard inspection tasks in metalworking and general engineering. This ensures consistent, repeatable readings without over‑specifying for common workshop requirements. Clear digital operation reduces handling errors The instrument features a straightforward digital display with ON/OFF, ZERO and mm/inch switching, simplifying cross‑unit comparisons and data logging. The electronic readout minimises parallax and interpretation errors associated with analogue scales, improving throughput in routine checks. The compact jaw geometry and intuitive controls speed up frequent measurements while maintaining the precision expected in production environments. Built for dependable everyday use Constructed from fibreglass with a low mass of approximately 0.1 kg, this caliper is easy to handle and transport between workstations. The material choice contributes to resistance against workshop humidity and reduces thermal mass, which can be beneficial when measuring parts that are not thermally stable. As a standard 150 mm class instrument, it fulfils the typical needs of maintenance, quality control and machining setups where a balance of stiffness, reach and operability is required. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine digital caliper into your inspection workflow and to confirm the best accessory options for production demands Technical Data Article number: M216.070 GTIN: 4054469110219 ECLASS: 21170344 Manufacturer: Metav IndustryLine Facts Measuring range: 0–150 mm Resolution: 0.01 mm Weight: 0.1 kg Jaw length: 40 mm Special features Construction: Fibreglass body Type: Digital caliper Display functions: ON/OFF, ZERO, mm/inch Category: Caliper / Messschieber FAQ What is the measuring range and resolution of this caliper? The caliper offers a measuring range of 0–150 mm with a resolution of 0.01 mm, matching typical workshop accuracy requirements for inspection and layout work using the M216.070 Digital Caliper. What material is the caliper made from and why does it matter? The body is made of fibreglass, which keeps the instrument lightweight and provides good resistance to corrosion and thermal mass, making the M216.070 well suited to everyday workshop use. Can the display switch between millimetres and inches? Yes — the integrated digital display supports mm/inch conversion and includes ON/OFF and ZERO functions for straightforward unit switching and relative measurement. Is this caliper appropriate for machine‑shop quality control? As a 150 mm class digital caliper, it is designed for standard machine‑shop and workshop quality checks where a combination of reach, stiffness and 0.01 mm readout is required. What identifiers should be used when ordering or referencing this caliper? Reference SKU M216.070 and GTIN 4054469110219 when enquiring or ordering to ensure the correct digital caliper model is supplied. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Precision Caliper With Cross Tips, 0.01mm Resolution, Depth Rod Ø1.5mm, Inductive, ISO 13385 - Helios Preisser
Take advantage of precise workshop measurement with an inductive measuring system and a clear LCD readout, combined with robust stainless steel construction for dependable daily use. Order the pocket digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Pocket digital caliper DIGI‑MET with cross tips — Inductive system and clear LCD, Helios Preisser DIGI‑MET with cross tips is a compact pocket digital caliper designed for fast, repeatable measurements in workshops and inspection benches Inductive measuring system High-resolution readout 0.01 mm Stainless steel construction Depth probe round Ø 1.5 mm Accurate measurement that keeps production moving The compact digital caliper delivers reliable accuracy with a resolution of 0.01 mm and a stated tolerance of ±0.03 mm, making it suitable for routine quality checks and setup tasks. The inductive system reduces contact wear and provides stable readings even under demanding workshop conditions. As a result, measurement cycles are shorter and decisions on part acceptance or rework are supported by consistent numeric data rather than estimates. Clear display and straightforward handling for everyday use A tall LCD display (11 mm) with intuitive functions such as ON/OFF, mm/inch conversion, PRESET and key lock simplifies reading and reduces time spent interpreting results. The instrument includes a locking screw for secure measurement retention and cross tips to assist with interior and exterior checks. The absence of a data output port means the caliper is optimised for rapid manual checks rather than automated logging, which suits many bench and field applications where quick verification is the priority. Built for workshop durability and versatile measurement Constructed from stainless steel, the caliper tolerates routine handling and maintains calibration stability. The integrated depth probe (round Ø 1.5 mm) extends usability to narrow or recessed features, while the compact form factor supports transport in tool kits. Conformity with ISO 13385 underlines the manufacturing standard and helps procurement decisions that require traceable tool quality. The device supports four measurement modes, enabling interior, exterior, depth and step measurements with a single instrument. For precise, robust workshop measurement rely on the Helios Preisser DIGI‑MET pocket digital caliper — contact Metav Werkzeuge in Emmerich for tailored advice or to secure stock from our European quality hub. Technical data Article number: 1320416 GTIN: 4029713018962 Manufacturer: Helios Preisser Product name: Pocket digital caliper DIGI‑MET with cross tips Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm LCD height: 11 mm Jaw length: 40 mm Data output: none Measurement system: inductive 4‑way measurement: yes Special features Material: stainless steel Depth gauge: round Ø 1.5 mm Cross tips for internal and external measurements Locking screw included LCD functions: ON/OFF, mm/inch, PRESET, key lock Standard: ISO 13385 FAQ What measurement range and resolution does the DIGI‑MET offer? The Helios Preisser pocket digital caliper DIGI‑MET (SKU 1320416) covers 0–150 mm with a resolution of 0.01 mm and an accuracy of ±0.03 mm. Is the caliper suitable for depth measurements in narrow bores? Yes, the DIGI‑MET includes a round depth probe Ø 1.5 mm, enabling depth checks in narrow or recessed features. Can measurement data be transferred to a PC or data logger? The instrument is supplied without a data output port (data output: none), so readings are intended for direct manual recording rather than automated transfer. How does the inductive measuring system benefit workshop use? The inductive system reduces wear on the measuring carriage and provides stable, repeatable readings under normal workshop conditions; this supports efficient quality control on the shop floor. Which standard does the caliper conform to and what does that mean? The tool meets ISO 13385, indicating it is manufactured to defined quality and dimensional tolerances, which assists with procurement and inspection traceability. Helios Preisser — Contact via Metav Werkzeuge: Emmerich am Rhein, Email: info@metav-werkzeuge.com, Phone: +49 2822 7131930
150mm Digital Precision Caliper With Depth Rod, 0.01mm Display, ABS/INC, Battery CR2032, Supplied In Case - Filetta
Reliable readings and smooth handling result from the digital mm/inch display, a 0–150 mm measuring range and ±0.03 mm accuracy—ideal for routine workshop quality checks. Order or request advice via Metav Werkzeuge for prompt, reliable supply. MS910.468 – Filetta digital caliper, 0–150 mm, ±0.03 mm accuracy MS910.468 is a compact digital caliper designed for workshop and inspection tasks where practical reach and dependable repeatability are required. Digital mm/inch display with reset function High accuracy ±0.03 mm Measuring range 0–150 mm Depth gauge and locking screw included Dependable precision for everyday quality control The caliper delivers ±0.03 mm accuracy with a display resolution of 0.01 mm, giving a solid balance between usability and measurement confidence for general engineering and metalwork. The 150 mm span places the instrument in the standard size class, which is widely used in machine shops because it offers an effective compromise of reach, rigidity and single‑hand operation. This combination supports repeatable checks on components, fixtures and assemblies without overcomplicating the workflow. Quick readings and flexible units to speed inspection A clear digital display shows measurements in mm/inch and includes ABS/INC, on/off and reset functions for straightforward operation and quick zeroing at any jaw position. The present control layout reduces calculation steps during a series of checks and minimises transcription errors when logging results, so inspection throughput increases while the risk of misinterpretation is lowered. Controlled handling and finer adjustment for delicate work Fine adjustment is provided via a thumbwheel, allowing measured, small moves to be made with minimal disturbance to the workpiece. A locking screw secures the jaws once the value is taken, ensuring the reading remains stable during transfer or recording. These mechanical aids reduce operator influence on the result and make the instrument easier to use in constrained or repetitive tasks. Practical features for the busy workshop The caliper includes an integrated depth gauge for blind bores and step measurements, extending the instrument’s usefulness beyond simple inside and outside measurements. The instrument is battery powered by a single CR2032, which is a commonly available cell and simplifies field replacement. Built for routine use, the design keeps operation intuitive while the core hardware supports reliable, day‑to‑day measurement routines. For personalised ordering and delivery options for the Filetta MS910.468 digital caliper, or to discuss suitability for specific applications, please contact Metav Werkzeuge for expert advice and reliable supply from Emmerich. Technical Data Article number: MS910.468 Manufacturer: Filetta Product type: Digital caliper Display functions: mm/inch, on/off, ABS/INC, reset Power supply: 1x CR2032 SKU: MS910.468 Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Jaw length: 40 mm Special features Thumbwheel for fine adjustment Locking screw for fixed readings Depth gauge for bore and step measurement Digital readout for fast unit switching FAQ How accurate is the instrument for routine inspection? The Filetta MS910.468 provides an accuracy of ±0.03 mm with a display resolution of 0.01 mm, suitable for standard workshop quality control tasks. Can the caliper measure depth and steps as well as external dimensions? Yes, the instrument includes an integrated depth gauge and can perform inside, outside, step and depth measurements with stable readings. What makes this caliper suitable for daily workshop use? A combination of the mm/inch digital display, the thumbwheel for fine adjustments and the locking screw gives practical speed, controlled handling and repeatable results for everyday checks. Which battery does the caliper require? The unit uses a single CR2032 cell; this type is widely available and simple to replace when required. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
150mm Digital Precision Caliper With Depth Rod, 0.01mm Resolution, CR2032 Battery, Supplied In Case - Filetta
The combination of a precise 0–150 mm measurement range, a 0.01 mm digital readout and a locking screw provides reliable, workshop-grade results with rapid repeatability; order the caliper directly via Metav Werkzeuge or consult our advisers for application support. Filetta MS910.464 Digital Caliper — 0–150 mm range, 0.01 mm resolution The Filetta MS910.464 digital caliper is a compact, workshop-oriented measuring instrument for general metalworking and inspection tasks, featuring an mm/inch digital display and an integrated depth gauge. Digital mm/inch display, 0.01 mm resolution Depth gauge and 40 mm jaw length Locking screw and thumb roller adjustment Supplied in a transport plastic case Precise readings that support process control The instrument delivers a 0–150 mm measuring range with a display resolution of 0.01 mm and an stated accuracy of ±0.03 mm, making it a standard caliper suited to everyday machining and inspection. The numerical specifications translate into practical benefits: reliably repeatable linear measurements across typical workshop parts, sufficient fineness for quality checks and component fitting, and a readable digital interface that shortens measurement cycles. The solid numerical basis supports faster decision-making on the shop floor and reduces rework. Designed for efficient handling and fine adjustment A dedicated thumb roller (drive wheel) enables controlled traversing of the jaws while the locking screw secures the setting for transfer or marking tasks; the instrument therefore combines delicate adjustment with robust fixation. The integrated depth gauge extends functionality beyond external and internal caliper jaws, allowing straightforward depth and step measurements without changing tools. These features together improve throughput by reducing tool changes and stabilising measurement force, which limits user-induced variation. Practical supply and battery convenience The caliper operates from a single CR2032 cell, offering long shelf life and simple replacement. The digital display includes mm/inch switching, an On/Off button and a Reset function for zeroing, which simplifies setup for batch checks and differing measurement conventions. Delivery includes a protective plastic case for transport, securing the instrument during storage or on-site transfers and lowering the risk of accidental damage between uses. Applications, suitability and maintenance Classified as a standard length instrument (best-in-class for 100–300 mm ranges), this caliper is intended for routine use in machine shops, maintenance departments and technical inspection. Basic upkeep consists of keeping the scale clean and dry and replacing the battery as needed; the locking screw should be used to avoid accidental impacts. The unit is appropriate where a balance of reach, stiffness and one-handed operability is required, such as component assembly, fixture checks and incoming goods inspection. For procurement assistance or specification advice on the Filetta MS910.464, contact Metav Werkzeuge in Emmerich by phone or email to discuss suitability for specific production tasks and delivery options. Technical Data SKU: MS910.464 Brand: Filetta Category: Digital caliper Facts Measuring range: 0–150 mm Resolution (reading): 0.01 mm Accuracy: ±0.03 mm Jaw length: 40 mm Battery: 1× CR2032 Special features Digital display with mm/inch, On/Off and Reset Locking screw for secured measurements Depth gauge for step and depth measurement Thumb roller (drive wheel) for fine adjustment Supplied in a transport plastic case Classified as a standard caliper (100–300 mm) FAQ What is the measuring range and resolution of this caliper? The Filetta MS910.464 measures from 0 to 150 mm with a digital resolution of 0.01 mm, suitable for standard workshop and inspection tasks. How accurate are measurements with this instrument? The specified accuracy is ±0.03 mm, which aligns the caliper with typical workshop-quality requirements for metalworking and inspection. Which measurement functions are supported? External, internal and depth measurements are possible; the display supports mm/inch switching and zeroing for comparative checks with the Filetta MS910.464. How is the caliper powered and how long does the battery last? The unit uses a single CR2032 battery; life depends on usage and display time, but replacement is straightforward and inexpensive. Is the caliper supplied ready for use and how is it delivered? The caliper is supplied in a protective plastic case for transport, with the battery fitted so the instrument is ready for immediate use. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
150mm Digital Precision Caliper With Round Depth Probe Ø1.5mm, LCD IP67 - Helios Preisser
Take advantage of a combination of accurate measurement, rugged workshop protection and practical handling for reliable inspection and production. Order the precision tool directly via Metav Werkzeuge or consult our specialists for application advice. DIGI‑MET digital pocket caliper with cross‑point jaws — Helios Preisser, IP67, stainless steel DIGI‑MET digital pocket caliper with cross‑point jaws is a compact precision measuring instrument for general workshop and quality control tasks, offering four-way measurement and a protected digital display. IP67 protection for wet and dusty use Stainless steel construction for durability 0–150 mm range with 0.01 mm resolution Cross‑point jaws for precise edge contact Depth rod Ø1.5 mm for narrow-bore measurement Consistent accuracy that speeds up inspection The compact digital caliper delivers ±0.03 mm accuracy across a 0–150 mm measuring span with 0.01 mm resolution, enabling dependable results for incoming inspection and in‑process checks. Conformity with ISO 13385 provides an objective quality standard, which supports traceable measurement routines and reduces the risk of rework. The high readout precision combined with a stable jaw geometry ensures reproducible measurements on small batch or series work. Built to withstand workshop conditions A stainless steel body and sealed electronics with IP67 protection mean the instrument tolerates coolant splash, chips and the day‑to‑day wear of a busy bench. The rugged construction reduces downtime for replacements and keeps calibration intervals predictable. For workshops seeking long service life from their metrology tools, the mechanical robustness and sealed display assembly contribute to lower total cost of ownership and more consistent production output. Practical features that improve workflow The clear LCD (11 mm) offers fast readout switching between mm/inch and includes ON/OFF, PRESET and a key lock for stable settings; a locking screw secures measurements for transfer or recording. Cross‑point jaws deliver secure contact on edges, while the slim depth rod Ø1.5 mm allows depth checks in narrow bores. Four‑way measurement capability (external, internal, depth, step) and a compact footprint enable versatile use across inspection benches, assembly stations and mobile toolboxes. Note: the instrument is supplied without data output, so readings are taken directly from the display. Contact Metav Werkzeuge for tailored advice on the Helios Preisser DIGI‑MET and reliable supply from our Emmerich facility Technical data Article number: 1326416 Manufacturer: Helios Preisser GTIN: 4029713019044 Model: DIGI‑MET with cross‑point jaws Type: Digital pocket caliper Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Jaw length: 40 mm Special features Material: stainless steel Protection class: IP67 Display: LCD 11 mm with ON/OFF, mm/inch, PRESET, key lock Depth rod: round Ø1.5 mm Locking screw Four‑way measurement (external/internal/depth/step) Data output: none Standard: ISO 13385 FAQ What measurement range and resolution does the caliper provide? The digital pocket caliper offers a measuring range of 0–150 mm with a resolution of 0.01 mm and an accuracy of ±0.03 mm. Is the instrument suitable for use at the machine or in damp environments? Yes, the DIGI‑MET by Helios Preisser is designed with IP67 protection and a stainless steel body, making it suitable for wet or chip‑exposed workshop conditions. Can the caliper record measurements electronically? This model is supplied without a data output interface; readings are taken from the integrated LCD display. Which measurement functions are available with this tool? The caliper supports external, internal, depth and step measurements and includes cross‑point jaws plus a depth rod Ø1.5 mm for narrow bores. Does the product comply with common measurement standards? The instrument meets ISO 13385, ensuring a recognised baseline for precision measuring equipment. Helios Preisser — Supplier: Metav Werkzeuge, Emmerich am Rhein; Email: info@metav-werkzeuge.com; Tel: +49 2822 7131930
150mm Digital Precision Caliper With Square Depth Rod, 0.01mm Resolution, Inductive System, ISO 13385 - Helios Preisser
Take advantage of precise inductive measuring, robust stainless steel construction and clear LCD readout for efficient workshop measurement tasks; order directly via Metav Werkzeuge or consult our advisors for tailored advice. DIGI‑MET with cross points — Pocket digital caliper, 0–150 mm, inductive system (Helios Preisser) The DIGI‑MET pocket digital caliper offers accurate outside, inside, depth and step measurements for metalworking, toolmaking and workshop quality control. *Inductive measuring system for robust readings *High resolution 0.01 mm with ±0.03 mm accuracy *Stainless steel construction for workshop durability *Four-function measuring: inside/outside/depth/step Precision where it counts: reliable measurements in production The caliper uses an inductive measuring system, which provides stable, low‑wear sensing even in workshop environments where light contamination and handling are common. With a measuring range of 0–150 mm, a resolution of 0.01 mm and an accuracy of ±0.03 mm, the instrument supports repeatable dimensional control for small parts and general engineering work. The four basic measurement modes—outside, inside, depth and step—are integrated to reduce tool changes and speed up inspection routines, delivering a clear productivity advantage for repetitive tasks. Practical design for everyday workshop use A compact pocket design with a 40 mm jaw length and a square depth gauge gives secure contact and improved stability when measuring grooves, recesses and depths. The 11 mm LCD display with ON/OFF, mm/inch and PRESET functions and a key lock enables fast reading and simple unit conversion on the fly. A locking screw secures the slider after setting, preventing accidental changes during transfer to recording or documentation. Note: this instrument does not provide a data output interface; readings must be recorded manually. Built for durability and traceability Constructed from stainless steel and conforming to ISO 13385, the caliper is designed for long service life and traceable quality control. Cross‑point contact tips increase versatility when locating on small features, while the inductive system minimises the effect of surface wear on long‑term accuracy. As a compact measuring instrument from Helios Preisser, it suits workshops and service departments that prioritise straightforward, dependable measurement tools that reduce rework and support consistent production quality. Contact Metav Werkzeuge in Emmerich for personal advice on integrating the Helios Preisser DIGI‑MET pocket digital caliper into existing inspection routines and to place an order; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 1320417 GTIN: 4029713018979 Manufacturer: Helios Preisser Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display height: 11 mm Jaw length: 40 mm Special features Stainless steel construction Inductive measuring system Four‑function measuring (outside, inside, depth, step) Square depth gauge Locking screw No data output Conforms to ISO 13385 FAQ What measurement functions does the caliper offer? The caliper supports outside, inside, depth and step measurements; cross‑point tips aid contact on small features. What are the resolution and accuracy of this instrument? Resolution is 0.01 mm with an accuracy of ±0.03 mm, suitable for routine workshop quality checks with the DIGI‑MET pocket caliper. Is the display easy to read in low light? The 11 mm LCD display provides high‑contrast numerals for clear readings under typical workshop lighting. Can measurement data be transferred to a PC? This model has no data output interface; measurements are read from the display and recorded manually. Is the caliper suitable for harsh workshop environments? Yes—stainless steel construction and an inductive measuring system reduce sensitivity to wear and light contamination, extending usable service life. Helios Preisser — Supplier: Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930
why digital calipers accelerate accurate measurement
A digital caliper is a precise length-measuring instrument that captures measurements electronically and shows them on an LCD display, making read‑out immediate and error‑free. Compared with analogue calipers it delivers higher accuracy, faster operation and the option to store or transfer measurements, which speeds up inspection and reduces rework. Metav supplies digital calipers from leading manufacturers, ready for industry, workshop and laboratory use.
how digital calipers are used in industrial settings
Digital calipers work by converting linear displacement into an electronic signal via a capacitive sensor, with a clear LCD display and a zero function at any position. Many models allow switching between mm/inch and provide data output for direct integration into measurement systems. Construction in stainless steel and optional protection ratings such as IP54 make them robust enough for shop‑floor tasks. Typical measuring ranges include 0–150 mm and 0–300 mm, covering most component inspection needs.
key performance benefits that improve your workflow
- Rapid, error‑free readings thanks to the LCD display and direct digital output, reducing inspection time.
- Consistent repeatability with a resolution commonly of 0.01 mm, which minimises corrective work.
- Flexible operation with zero at any position and quick conversion between mm/inch, speeding setup and measurement changes.
- Durable design (stainless steel housing, optional IP54) for low maintenance and long service life.
- Seamless data handling where data output is available, enabling faster documentation and process control.
metav industryline and chosen manufacturers as practical options
Metav IndustryLine provides precise, dependable measuring tools designed for everyday use in production and quality assurance. For users seeking cutting‑edge electronics and enhanced connectivity, Microtech offers innovative digital calipers with advanced data features; Filetta supplies robust, economical alternatives for routine workshop tasks. Metav combines its product range with local stock and expertise: more than 48,000 customers trust Metav, and the company offers over 250,000 products from its Emmerich location, acting as a quality filter for the european market.
concise summary
digital calipers deliver fast, repeatable and easily transferable measurements for metalworking, plastics and electronics, with common specifications such as 0.01 mm resolution, 0–150 mm / 0–300 mm ranges and data output options. Metav’s range, including Metav IndustryLine, Microtech and Filetta, covers both high‑precision and cost‑effective needs.
FAQ
what measuring range should i choose for digital calipers?
Choose the measuring range based on the largest dimension you need to check; common options are 0–150 mm for general components and 0–300 mm for larger parts. digital calipers with an appropriate range avoid unnecessary repositioning and speed up inspection.
how precise are digital calipers for repeat measurements?
Digital calipers typically offer a resolution of 0.01 mm and, with a capacitive sensor and solid construction, provide high repeatability suitable for quality control and assembly tasks.
can i connect digital calipers to a pc or measurement system?
Yes. Models with data output support direct transfer of measurements to a pc or data logger, simplifying traceability and statistical process control when used in inspection workflows.
are digital calipers suitable for workshop environments?
Many digital calipers feature a stainless steel housing and protection ratings such as IP54, making them durable enough for the workshop while remaining easy to maintain.
what is the difference between metav industryline, microtech and filetta calipers?
Metav IndustryLine focuses on reliable, well‑manufactured tools for everyday precision; Microtech targets advanced functionality and connectivity for demanding applications; Filetta provides robust, value‑oriented instruments for routine workshop use. Metav packages these choices with local stock and industry expertise from Emmerich.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com