High-precision drills for reliable, high-throughput metalworking
Drills provide the fundamental rotating cutting solution for producing accurate cylindrical holes in materials such as structural steel, high-alloy stainless steel, cast iron, non-ferrous metals and engineering plastics, delivering consistent hole quality and extended tool life in CNC machining and turning centres. This category covers everything from classic twist drill made from high-speed steel for general machining to solid carbide drill optimised for high cutting speeds and long run times, offering advanced coatings and internal coolant options for improved heat management. By using optimised point geometries and split points the tools reduce thrust, prevent walking at the start of the cut and ensure superior surface finish, which benefits sectors from general mechanical engineering to automotive component manufacture.
10mm NC Spot Drill Solid Carbide TiAlN Coated 142° Point With Cylindrical Shank DIN 6535-HB, Right-Hand - TECWERK
Take advantage of solid carbide construction and a TiAlN coating combined with a 142° point angle to ensure fast, positional spotting and reliable centring in one operation; order the NC centre drill directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. NC Centre Drill D 10 mm — Solid Carbide, TiAlN, 142° Point Angle (TECWERK) The NC Centre Drill D 10 mm is engineered for positional spotting and combined centring and chamfering on NC machines and drilling centres. Solid carbide (VHM) for high rigidity TiAlN coating for increased wear resistance 142° point angle for precise centring DIN 6535-HB cylindrical shank Faster, positional spotting for automated production The combination of solid carbide construction and a TiAlN surface treatment delivers consistent performance when initiating holes on automated equipment. Designed for positional spotting, the tool reduces the risk of wander at the start of the operation and enables exact location of subsequent drills; this improves first-pass accuracy and reduces rework. Its geometry supports secure initial engagement on CNC lathes, milling centres and dedicated NC drilling machines, helping to keep production runs efficient and repeatable. Wide material range for demanding components The centre drill is specified for use on high-strength steels, steel castings, grey cast iron, stainless steels and non-ferrous metals, offering broad applicability across mixed production environments. For operations in steel where cutting forces approach 800 N, the suggested feed setting is 0.11 mm/rev, which balances chip formation and tool life. This combination of material compatibility and a robust coating makes the tool suitable for components that require both accurate centring and a clean chamfer in a single pass. Simple integration with common holders and drills A DIN 6535-HB cylindrical shank ensures straightforward mounting in standard toolholders and collets, while the right-hand cutting geometry provides conventional chip flow and stable cutting behaviour. The tip profile is designed to centre twist drills with point angles from 120–140°, allowing precise alignment of subsequent solid carbide drills and reducing set-up time. This compatibility supports a streamlined toolchain and fewer changeovers during series production. Durability and handling that reduce downtime The TiAlN coating enhances heat resistance and surface hardness, which extends service intervals under cyclic spotting and chamfering loads. The tool’s right-cutting design and balanced flute geometry promote consistent chip evacuation and prevent premature wear. Regular inspection for wear at the tip and secure clamping of the cylindrical shank are sufficient maintenance measures to preserve accuracy and prolong life, contributing to dependable throughput in workshop and industrial settings. For precision at production speed, select the TECWERK NC centre drill via Metav Werkzeuge — for purchasing or technical matching, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical details Article number: 2000865842NW Product name: NC Centre Drill D 10 mm VHM TiAlN 142° TECWERK Manufacturer: TECWERK Packaging unit: 1 Data Diameter: 10 mm Point angle: 142° Feed in steel (up to 800 N): 0.11 mm/rev Shank standard: DIN 6535-HB Special features Solid carbide (VHM) TiAlN coating Right-cutting geometry Cylindrical shank to DIN 6535-HB Positional spotting for NC machines and drilling centres Combined centring and chamfering in one pass Suitable for high-strength steels, steel castings, grey cast iron, stainless steels and non-ferrous metals Centres twist drills with 120–140° point angle FAQ What materials can be machined with this centre drill? The NC Centre Drill D 10 mm is suitable for high-strength steels, steel castings, grey cast iron, stainless steels and non-ferrous metals as stated in the technical description. Is the tool compatible with standard collets and holders? Yes, the DIN 6535-HB cylindrical shank fits common collets and holders used on NC machines and drilling centres. What is the recommended feed for steel when cutting under 800 N? A feed of 0.11 mm/rev is specified for steel at cutting forces up to 800 N to balance chip control and tool life. Can this centre drill be used to prepare for solid carbide twist drills? The tip geometry is designed to centre twist drills with point angles between 120–140°, enabling accurate positioning of subsequent solid carbide drills. What is the SKU for ordering or referencing this item? The article number for ordering and technical reference is 2000865842NW. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
10mm NC Spot Drill Solid Carbide TiAlN Coated 90° For High-Strength Steel, Cast Iron, Stainless Steel, Non-Ferrous - TECWERK
Take advantage of the combination of fast, positions-accurate spot-drilling and integrated chamfering for fewer operations and shorter cycle times; order the tool via Metav Werkzeuge or consult the sales team for application advice. NC spot drill D.10mm solid carbide TiAlN 90° TECWERK — 90° point, TiAlN-coated spot drill for NC machines The NC spot drill D.10mm solid carbide TiAlN 90° is designed for positions-accurate spot‑drilling, centring and chamfering of threaded holes in a single pass on NC machines and drilling centres Solid carbide, TiAlN coating, 90° point Cylindrical shank to DIN 6535‑HA Centring and chamfering in one operation Suited to high-strength steels and stainless Reduce cycle times with combined centring and chamfering The 90° geometry of the tool reduces the number of setup steps by allowing centring and chamfering in a single operation, which translates into measurable time savings on batch production. The slim process chain is especially valuable in automated NC environments where each tool change or reposition costs valuable seconds. Built for rapid, positions‑accurate starts, this design minimises runout and improves repeatability on workpieces requiring precise hole location, which contributes to smoother downstream thread tapping and assembly. Robust cutting performance for demanding alloys Manufactured from solid carbide and finished with a TiAlN coating, the tool offers enhanced wear resistance and thermal stability in elevated cutting temperatures. This makes it particularly effective on high‑strength steels, steel castings and stainless steels, while remaining tolerant of many non‑ferrous materials. The coating reduces built‑up edge and prolongs service life under intermittent heavy loads, supporting consistent hole quality over multiple cycles and lowering the risk of premature tool change. Machine-ready design for straightforward integration The cylindrical shank conforms to DIN 6535‑HA, ensuring compatibility with standard collets and holders used across modern CNC drilling centres. Right‑hand cutting geometry and a short point length facilitate reliable chip evacuation during spot‑drilling operations on NC machines, reducing the likelihood of chatter and improving centring precision. The combination of standardised shank and predictable cutting behaviour makes the tool an efficient choice for production lines and job shops seeking straightforward retrofitting. Practical machining data and handling guidance A concrete feed reference is provided for shop planning: 0.11 mm/rev in steel at cutting forces up to 800 N serves as a starting point for process development. The right‑hand cutting action delivers conventional chip flow and is suitable for typical clockwise spindle rotation; adjustments to feed and speed should be validated on the specific machine and material. For optimal results, consider clamping rigidity, coolant strategy and the following of application‑specific parameters to preserve edge life and maintain consistent hole geometry. For reliable supply and application support, obtain the TECWERK NC spot drill via Metav Werkzeuge — Metav Werkzeuge provides stock availability from Emmerich and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000865815NW Label: NC spot drill D.10mm solid carbide TiAlN 90° TECWERK Manufacturer: TECWERK Packaging unit: 1 UID: 2000865815NW Facts Diameter: 10 mm Point angle: 90° Feed in steel up to 800 N: 0.11 mm/rev Packaging unit: 1 Special features Solid carbide body TiAlN coating Cylindrical shank to DIN 6535‑HA Right‑hand cutting Designed for positions‑accurate spot‑drilling on NC machines and drilling centres Centring and chamfering of threaded holes in one pass Suitable for high‑strength steels, steel castings, grey cast iron, stainless steels and non‑ferrous metals FAQ What materials is this spot drill suitable for? The NC spot drill D.10mm solid carbide TiAlN 90° from TECWERK is suitable for high‑strength steels, steel castings, grey cast iron, stainless steels and a range of non‑ferrous metals. Does the shank fit common holders and collets? Yes — the tool has a cylindrical shank to DIN 6535‑HA, so it is compatible with standard collets and holders that accept this shank form. What benefit does the TiAlN coating provide? The TiAlN coating increases heat resistance and wear protection, extending tool life under elevated temperatures and reducing the tendency for built‑up edge during repeated spot‑drilling cycles. Can centring and chamfering really be done in one operation? Yes; the geometry of the TECWERK NC spot drill is engineered to allow centring and chamfering of threaded holes in a single pass, reducing cycle time and eliminating a separate chamfering step. Which feed value should be used as a baseline? A recommended baseline for steel is 0.11 mm/rev (at cutting forces up to 800 N); final parameters should be adjusted to machine rigidity, material batch and coolant practice Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Solid Carbide Centre Drill 120° Right-Hand For High-Strength Steels And Non-Ferrous Metals - TECWERK
Take advantage of the combination of solid carbide construction, a 120° centring point and a DIN-compliant cylindrical shank for faster cycle times and reliable clamping. Order the tool via Metav Werkzeuge or request machining advice from their specialists for precise setup and supply. NC spot drill D10 mm — solid carbide, 120° centring point (TECWERK) The NC spot drill D10 mm — solid carbide, 120° is a right-hand cutting spot drill designed for positions-accurate and rapid spot drilling and chamfering on NC machines and boring mills. Solid carbide construction 120° centring point Cylindrical shank DIN 6535-HA Suitable for high-strength steels Reduce setup time with combined centring and chamfering A tool that centres and chamfers tapped holes in a single pass delivers clear productivity gains. The solid carbide geometry with a 120° point ensures precise initial contact and reduces wandering on thin or hardened surfaces, so hole position is accurate from the first operation. By combining centring and chamfering, the process chain is shortened, fixture time is minimised and repeatability across batches is improved, which supports leaner production and fewer rejects. Built for NC machines and demanding materials Engineered for NC machining and boring mills, the spot drill features a cylindrical shank to DIN 6535-HA, guaranteeing consistent clamping and concentricity in standard toolholders. The right-hand cutting geometry provides reliable chip formation when working with high-strength steels, cast steel, grey cast iron, stainless steels and non-ferrous metals. These material compatibilities make the tool a versatile choice for workshops that handle mixed production runs and require a robust, single-purpose solution. Practical operating guidance and material performance The tool is optimised for a recommended feed of 0.11 mm/rev in steel at cutting forces up to 800 N, providing a baseline for process planning and parameter selection. “VHM” denotes solid carbide, a material offering high rigidity and wear resistance compared with high-speed steel, which helps maintain hole quality under consistent production loads. The right-hand cutting configuration supports conventional spindle rotation and standard machining cycles, reducing the need for special programming or customised clamping routines. For tailored machining parameters or procurement of TECWERK NC spot drills, contact Metav Werkzeuge's specialist team in Emmerich by email info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 2000865824NW Designation: NC spot drill D10 mm, solid carbide, 120° (TECWERK) Packaging unit: 1 Core data Diameter: 10 mm Point angle: 120° Shank: cylindrical, DIN 6535-HA Material: solid carbide Cutting direction: right-hand cutting Recommended feed in steel: 0.11 mm/rev (up to 800 N) Special features For positions-accurate spot drilling on NC machines and boring mills Centres and chamfers tapped holes in one pass Particularly suitable for high-strength steels, cast steel, grey cast iron, stainless steels and non-ferrous metals FAQ What materials can this spot drill machine? The NC spot drill D10 mm (solid carbide, 120°) is suitable for high-strength steels, cast steel, grey cast iron, stainless steels and a range of non-ferrous metals. What does VHM mean for tool performance? VHM indicates solid carbide construction; this provides greater rigidity and wear resistance compared with HSS, which helps preserve hole quality during serial production with TECWERK spot drills. How should the shank be clamped? Use a toolholder compatible with cylindrical shanks to DIN 6535-HA to ensure concentric clamping and stable performance with the TECWERK spot drill. Is the feed value of 0.11 mm/rev mandatory? The listed 0.11 mm/rev in steel is a recommended starting point for process planning; final feeds should be adapted to machine power, fixture rigidity and workpiece material. Can the drill chamfer and centre in one operation? Yes, the geometry is designed to perform both centring and chamfering of tapped holes in a single pass, reducing cycle time and setup steps. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
10mm Solid Carbide Countersink 90° For NC Machines, Right-Hand - TECWERK
Take advantage of the combination of solid-carbide construction, precise 90° tip geometry and a DIN-standard shank for reliable, repeatable spot drilling on NC machines; order directly via Metav Werkzeuge or consult the experts for application-specific recommendations. TECWERK NC spot drill D10 mm, solid carbide, 90° The TECWERK NC spot drill D10 mm is a solid-carbide spot-drilling tool designed for positions‑accurate and rapid centre drilling and chamfering on NC machines and drilling centres Solid-carbide construction VHM Cylinder shank DIN 6535-HA 90° tip for precise positioning Suitable for high-strength and stainless steels Accurate initial holes for uninterrupted machining sequences The combination of a 90° tip and solid-carbide construction provides consistently sharp centre points that reduce runout and misalignment during initial drilling operations. This results in faster workpiece setup, fewer rejected parts and improved first‑pass accuracy on automated equipment. The DIN 6535-HA cylinder shank ensures secure clamping in standard tool holders, which maintains concentricity and minimises vibration during high‑precision operations. In practice, reduced rework and shorter cycle times are the primary gains when integrating this tool into a production line. Proven performance across demanding materials Designed for versatility, the spot drill is particularly effective on high‑strength steels, cast steel, grey cast iron, stainless steel and non‑ferrous metals. Solid-carbide (VHM) gives the tool the hardness and thermal stability required for abrasive and tough alloys, extending tool life compared with high‑speed steel alternatives. The right‑hand cutting geometry promotes clean chip formation and reliable centring even when working with materials that tend to work‑harden, so fewer tool changes are needed and overall machining costs fall. Integration with NC machining strategies for greater efficiency Optimised for use on NC machines and drilling centres, the tool performs both centring and light chamfering in a single pass, cutting cycle complexity and increasing throughput. The recommended feed in steel (up to 800 N) of 0.11 mm/rev provides a practical starting point for process setup: this feed balances effective material engagement with a conservative approach to tool life. The tool’s right‑hand cutting and standardised shank make it straightforward to programme into existing tool libraries, enabling predictable results and minimal commissioning time in automated environments. For supply and technical consultation on the TECWERK solid‑carbide spot drill, contact Metav Werkzeuge for specification advice and prompt delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000865806NW Brand: TECWERK Diameter: 10 mm Tip angle: 90° Shank: Cylinder shank DIN 6535-HA Material: Solid carbide (VHM) Cutting direction: Right-hand cutting Packaging unit: 1 Facts Feed in steel (up to 800 N): 0.11 mm/rev Diameter: 10 mm Tip angle: 90° Applications / Special features For positions-accurate spot drilling on NC machines and drilling centres Centring and chamfering of thread holes in one pass Particularly suitable for high-strength steels, cast steel, grey cast iron, stainless steels and non‑ferrous metals Cylinder shank to DIN 6535-HA for secure clamping Right-hand cutting for reliable chip evacuation FAQ What materials is this spot drill suitable for? The TECWERK NC spot drill D10 mm is suitable for high‑strength steels, cast steel, grey cast iron, stainless steel and non‑ferrous metals, offering versatility across common workshop and production applications. Can the tool centre and chamfer in a single operation? Yes, the design allows for centring and chamfering of thread holes in one pass, reducing cycle times and eliminating the need for a separate chamfering operation. Which shank standard does it use and why is that important? It uses a DIN 6535‑HA cylinder shank, which ensures consistent clamping and reduced runout when used with compatible tool holders, supporting high concentricity on NC machines. What feed rate is recommended for steel? A recommended starting feed in steel (up to 800 N) is 0.11 mm/rev, which balances effective machining with conservative tool wear for reliable performance. Is this tool intended for NC machines and drilling centres only? The tool is optimised for NC machines and drilling centres, where its geometry and shank standard support fast programme integration and predictable results; it can also be used in compatible automated setups where precision is required. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
10mm Spiralbohrer, 118° Spitzenwinkel, HSS, rollgewalzt, Morsekegel-Schafft, 87mm Spirallänge - MetavCUT
Der rollgewalzte Spiralbohrer von MetavCUT kombiniert HSS-Zähigkeit mit sicherer Spanabfuhr durch die 87 mm lange Spirale und bietet dank Morsekegelschaft hohe Kraftübertragung bei stationären Bohrungen; ideal für Stahl bis ca. 900 N/mm². Bestellen Sie den Spiralbohrer direkt über Metav oder nutzen Sie die technische Beratung bei Bedarf. Spiralbohrer MetavCUT Standard Line – HSS, Morsekegel, 10 mm Spiralbohrer von MetavCUT für Metallbohrungen mit rollgewalzter Ausführung, geeignet für Ständerbohrmaschinen und anspruchsvolle Werkstattaufgaben Rollgewalzte HSS-Ausführung, erhöhte Bruchsicherheit Morsekegelschaft für festen Sitz in Ständerbohrmaschinen Geeignet für Stahl bis ca. 900 N/mm² Spitzwinkel 118° für einfache Zentrierung Spirallänge 87 mm für zuverlässige Spanabfuhr Präzise Eignung für den Werkstattalltag und industrielle Anwendungen Die rollgewalzte Fertigung macht diesen Spiralbohrer besonders zäh und weniger bruchanfällig, was sich bei wiederholten Metallbohrungen auszahlt. Durch das Material HSS (Schnellarbeitsstahl) ist der Bohrer für legierte und unlegierte Stähle, Gusswerkstoffe sowie Nichteisenmetalle geeignet. Der Durchmesser von 10 mm liegt im Standard-Bereich und erlaubt effizientes Arbeiten mit stationären Maschinen; bei hoher Präzision empfiehlt sich ein kurzes Anpunkten mit einem Zentrierbohrer. Sichere Aufnahme und hohe Kraftübertragung für schwere Aufgaben Der Morsekegelschaft gewährleistet eine selbsthemmende und formschlüssige Verbindung zur Aufnahme der Maschine, wodurch hohe Drehmomente sicher übertragen werden können. In Kombination mit der rollgewalzten Spiralform ergibt sich eine robuste Lösung für Bohrarbeiten in der Werkstatt und im Maschinenbau. Die Norm DIN 345 sorgt für Kompatibilität mit gängigen Maschinenaufnahmen und erleichtert die Einplanung in bestehende Fertigungsprozesse. Materialverständnis und richtige Anwendungsempfehlung Für Werkstücke bis etwa 900 N/mm² Zugfestigkeit ist der Bohrer eine wirtschaftliche Wahl; bei weichen Materialien hilft der Spitzenwinkel 118° beim sauberen Zentrieren. Rollgewalzte Bohrer bieten tendenziell weniger Rundlaufgenauigkeit als geschliffene Werkzeuge, daher ist bei hochpräzisen Passungen Vorbohren oder Nacharbeiten ratsam. Die Spirallänge 87 mm unterstützt die Spanabfuhr und reduziert die Gefahr von Verstopfungen bei üblichen Bohrtiefen. Handhabung, Standzeit und Pflegehinweise Regelmäßige Kühlung und angepasste Vorschubgeschwindigkeit erhöhen die Standzeit des Werkzeugs erheblich. Zur Vermeidung von vorzeitigem Verschleiß und zur Sicherstellung gleichbleibender Bohrergebnisse empfiehlt sich die Kontrolle auf Schneidkantenverschleiß und gegebenenfalls Nachschärfen durch Fachbetriebe. Die rollgewalzte Ausführung sorgt für günstige Anschaffungskosten bei guter Dauerhaftigkeit, was sie zu einer praxisorientierten Wahl für Werkstatt und Produktion macht. Greifen Sie zur robusten Lösung von MetavCUT: Den HSS-Spiralbohrer mit Morsekegel für belastbare Metallbohrungen direkt über Metav beziehen – bei Fragen erreichbar per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produkteigenschaften Artikelnummer: 54100-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Standard Line Norm: DIN 345 Daten Durchmesser: 10 mm Gesamtlänge: 168 mm Spirallänge: 87 mm Spitzenwinkel: 118° Verpackungseinheit: 1 Besonderheiten Material: HSS (Schnellarbeitsstahl) Schaft: Morsekegel (selbsthemmende Aufnahme) Ausführung: rollgewalzt (zäher, geringere Rundlaufgenauigkeit) Farbe: Schwarz Anwendung: Bohrer für Metall FAQ Ist der Spiralbohrer für Baustahl geeignet? Der MetavCUT Spiralbohrer Standard Line (SKU 54100-FDA) ist für Stahl bis etwa 900 N/mm² ausgelegt und eignet sich damit für viele Anwendungen im Maschinenbau und in der Werkstatt. Kann der Bohrer in einer Ständerbohrmaschine mit Morsekegel verwendet werden? Ja, der Morsekegelschaft des MetavCUT Spiralbohrers ist für die Aufnahme in passenden Ständerbohrmaschinen vorgesehen und überträgt hohe Drehmomente sicher. Welche Vorteile bietet die rollgewalzte Ausführung? Rollgewalzte Spiralbohrer sind in der Regel zäher und weniger bruchanfällig als geschliffene Varianten, was besonders bei wiederkehrenden Lochbohrungen und kleineren Durchmessern von Vorteil ist. Brauche ich Vorbohren bei 10 mm Durchmesser? Bei üblichen Werkstattanwendungen kann der 10 mm Bohrer direkt eingesetzt werden; für hochpräzise Passungen empfiehlt sich jedoch ein Anpunkten oder kurzes Vorbohren zur besseren Zentrierung. Wie wichtig ist die richtige Kühlung beim Bohren mit diesem Bohrer? Kühlung und angepasster Vorschub verlängern die Standzeit des HSS-Werkzeugs deutlich und unterstützen die Spanabfuhr bei längeren Bohrungen.
11,5mm Spiralbohrer Typ N, 118° Spitzenwinkel, 94mm Spiralänge, reduziert 10mm Schaft, HSS, rollgewalzt, schwarz - MetavCUT
Der Spiralbohrer von MetavCUT kombiniert HSS-Material mit rollgewalzter Ausführung und reduziertem Schaft, wodurch besonders zähe Standzeit und geringeres Bruchrisiko bei gängigen Metallarbeiten erreicht werden. Nutzen Sie die Kombination aus Elastizität, Normkonformität nach DIN 338 und passgenauer Schaftlösung für zuverlässig saubere Bohrungen. Bestellen Sie das Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer MetavCUT Standard Line – Typ N, 11,5 mm Der Spiralbohrer MetavCUT Standard Line ist ein rollgewalzter HSS-Bohrer für Metallarbeiten an stationären und handgeführten Maschinen und eignet sich für legierten und unlegierten Stahl sowie Nichteisenmetalle. Rollgewalzte Ausführung für erhöhte Zähigkeit Material: HSS (Schnellarbeitsstahl) Reduzierter Schaft 10 mm für kleinere Bohrfutter Norm: DIN 338, kurze Spiralbohrer mit Zylinderschaft Spitzenwinkel 118° für einfache Zentrierung bei Metallen Zäher Aufbau bietet Bruchsicherheit und Wirtschaftlichkeit Die rollgewalzte Fertigung macht diesen HSS-Bohrer widerstandsfähig gegen mikrorisse und reduziert das Bruchrisiko, besonders bei kleinen Durchmessern. Durch die plastische Verformung im Walzverfahren entsteht eine faserige Struktur, die die Elastizität erhöht und die Standzeit im normalen Metallbereich verlängert. Für Werkstätten bedeutet das weniger Werkzeugwechsel und damit niedrigere Ausfallzeiten bei Serien- und Einzelarbeiten. Präzise Eignung für Metallanwendungen Mit 118° Spitzenwinkel und einer Spirallänge von 94 mm ist der Bohrer für Durchbohrungen in legierten und unlegierten Stählen, Gusseisen, Aluminium und Kunststoffen ausgelegt. Die Ausführung als Typ N (Normalspirale) sorgt für zügigen Spantransport bei üblichen Einsatzbedingungen, ohne dass aufwändige Anpassungen nötig sind. Anwender profitieren von reproduzierbaren Bohrbildern bei stationärer Nutzung und in vielen handgeführten Anwendungen. Praktische Schaftlösung und Maschinenkompatibilität Der reduzierte Schaft 10 mm erlaubt das Einspannen größerer Bohrdurchmesser in Bohrfutter mit begrenzter Spannweite. Das macht den Bohrer vielseitig einsetzbar, wenn Werkzeuge mit kleinerer Schaftaufnahme genutzt werden sollen. Die Gesamtlänge von 142 mm und die Spirallänge erlauben komfortable Handhabung bei mitteltiefen Bohrungen, ohne die Stabilität zu beeinträchtigen. Hinweise zur Anwendung und Pflege Bei der Nutzung des rollgewalzten Bohrers empfiehlt sich das Anpunkten mit einem Zentrierbohrer bei hoher Präzision, um Wandern zu vermeiden. Kühlschmierstoffe erhöhen Standzeit und Bohrqualität, besonders bei zähen Legierungen. Für sehr hohe Maßgenauigkeit oder tiefe Serienbohrungen können geschliffene Werkzeuge vorteilhafter sein; für den Alltagseinsatz bleibt diese Ausführung jedoch wirtschaftlich und robust. Zielgruppe und typische Einsatzfelder Entwickelt für Werkstatt, Montage und Industrie, eignet sich dieser Bohrer für Anwender, die belastbare und kosteneffiziente Werkzeuge für allgemeine Metallbearbeitung suchen. Die Standard Line richtet sich an Handwerk, Instandhaltung und Fertigung, die zuverlässige Ergebnisse ohne übertriebene Präzisionsanforderungen erwarten. Für präzise Metallbohrungen empfiehlt MetavCUT die Standard Line; bei Fragen zur Eignung kontaktieren Sie Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271 Leistungsmerkmale Artikelnummer: 61115-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Fakten Durchmesser: 11,5 mm Gesamtlänge: 142 mm Spirallänge: 94 mm Spitzenwinkel: 118° Verpackungseinheit: 5 Besonderheiten Material: HSS (Schnellarbeitsstahl) Ausführung: rollgewalzt Schaftausführung: reduziert 10 mm Norm: DIN 338 (Norm für kurze Spiralbohrer mit Zylinderschaft) Typ: Typ N (Normalspirale) Farbe: schwarz Hersteller: MetavCUT SKU: 61115-FDA FAQ Für welche Materialien ist dieser Bohrer geeignet? Der MetavCUT Spiralbohrer Standard Line eignet sich für legierten und unlegierten Stahl, Gusseisen, Aluminium sowie Kunststoffe und bietet durch die rollgewalzte Ausführung erhöhte Zähigkeit bei Standard-Metallanwendungen. Wie verhält sich der rollgewalzte Bohrer im Vergleich zu geschliffenen Bohrern? Rollgewalzte Bohrer wie der MetavCUT Standard Line sind zäher und weniger bruchanfällig, bieten aber geringfügig weniger Rundlaufgenauigkeit als geschliffene Werkzeuge; für Alltagsarbeiten ist das Preis-Leistungs-Verhältnis meist vorteilhaft. Wozu dient der reduzierte Schaft 10 mm? Der reduzierte Schaft 10 mm ermöglicht das Einspannen eines größeren Bohrerdurchmessers in Bohrfutter mit begrenzter Spannweite und erhöht somit die Maschinenkompatibilität im Betrieb. Welche Norm erfüllt dieser Bohrer und was bedeutet das? Der Spiralbohrer entspricht der DIN 338, was die Einordnung als kurzer Spiralbohrer mit Zylinderschaft festlegt und Standards bei Abmessung und Schaftform gewährleistet. Ist der Bohrer für tiefe Lochungen geeignet? Für sehr tiefe Bohrungen über das Fünffache des Durchmessers hinaus ist die Standardspirale weniger optimal; für solche Anwendungen sind abgestufte Vorbohrungen oder spezialisierte Werkzeuge empfehlenswert.
11,5mm Spiralbohrer, 118° Spitzenwinkel, HSS, Morsekegel, rollgewalzt, DIN 345 - MetavCUT
Der MetavCUT Spiralbohrer kombiniert HSS-Material, rollgewalzte Fertigung und eine Morsekegelaufnahme zu einem widerstandsfähigen Werkzeug für Metallbohrungen; die Konstruktion reduziert das Bruchrisiko bei kleinen Durchmessern und überträgt hohes Drehmoment zuverlässig. Nutzen Sie die robuste Ausführung und die präzise Spitzengeometrie für dauerhafte Ergebnisse oder fragen Sie unsere Beratung bei komplexen Anforderungen an. Spiralbohrer 11,5 mm »MetavCUT Standard Line« (Morsekegel, HSS) Der Spiralbohrer von MetavCUT ist ein rollgewalzter HSS-Bohrer mit Morsekegelaufnahme für allgemeine Metallbohrungen und Werkstattanwendungen. HSS-Rostfreier Werkstoff für hohe Zähigkeit Rollgewalzte Fertigung für geringes Bruchrisiko Morsekegel-Schaft für sichere Kraftübertragung 11,5 mm Durchmesser, 175 mm Gesamtlänge Spitzenwinkel 118° für einfaches Zentrieren Dauerhafte Zähigkeit durch HSS und rollgewalzte Verarbeitung Der Einsatz von HSS (Schnellarbeitsstahl) verleiht dem Werkzeug hohe Verschleißfestigkeit, während die rollgewalzte Fertigung die Zähigkeit erhöht und das Bruchrisiko bei kleinen Bohrdurchmessern verringert. Diese Kombination bedeutet konkret: weniger Ausfälle bei Serienarbeiten und längere Standzeiten im Vergleich zu einfachen, ungehärteten Bohrern. Für Anwender, die robuste Werkzeuge für den täglichen Einsatz suchen, liefert diese Ausführung handfeste Vorteile. Vielseitige Eignung im Standard-Bereich für Metall Mit einem Durchmesser von 11,5 mm fällt der Bohrer in den Standard-Bereich, eignet sich daher besonders für Werkstatt, Montage und handgeführte Maschinen. Die Geometrie ermöglicht das Bohren in legierten und unlegierten Stählen sowie Gusseisen und Nichteisenmetallen bis ca. 900 N/mm² Festigkeit. Wer schnelle, zuverlässige Bohrungen in üblichen Werkstoffen benötigt, profitiert von der Auslegung dieses Werkzeugs. Sichere Aufnahme und präzise Spitzengeometrie für stabile Arbeit Die Morsekegel-Schaft sorgt für selbsthemmende, kraftschlüssige Verbindung in Ständerbohrmaschinen und Drehmaschinen und überträgt so hohe Drehmomente ohne Rutschen. Der Spitzenwinkel 118° erleichtert das Zentrieren auf weniger harten Flächen und reduziert das Wandern beim Anbohren. Mit einer Spirallänge 94 mm und einer Gesamtlänge von 175 mm bietet das Werkzeug ausreichend Schnitttiefe für viele Anwendungen in Werkstatt und Produktion. Praxistipps für saubere Ergebnisse und lange Standzeit Vor dem Bohren empfiehlt sich Anpunkten für bessere Zentrierung, insbesondere bei rollgewalzten Bohrern, die weniger Maßhaltigkeit als geschliffene Varianten aufweisen. Kühlung und angemessene Schnittgeschwindigkeit verlängern die Lebensdauer, und bei hoher Präzision hilft ein Zwischenbohrschritt. Das passende Vorgehen ist einfach: für den Standard-Bereich direkt bohren, bei höherer Genauigkeit anpunkten. Für professionelle Metallbearbeitung empfehlen wir den Einsatz des MetavCUT Standard Line Spiralbohrers mit Morsekegelaufnahme; bei Fragen zu Anwendung oder Werkstoffempfehlungen erreichen Sie uns per E‑Mail unter info@metav-werkzeuge.com, telefonisch unter +49 2822 7131930 oder per WhatsApp unter +49 170 2837271. Produktmerkmale Artikelnummer: 54115-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Norm: DIN 345 Fakten Durchmesser: 11,5 mm Gesamtlänge: 175 mm Spirallänge: 94 mm Spitzenwinkel: 118° Verpackungseinheit: 1 Besonderheiten Ausführung: rollgewalzt Material: HSS (Schnellarbeitsstahl) Schaftausführung: Morsekegel (konische, selbsthemmende Aufnahme) Farbe: schwarz Anwendung: Bohrer für Metall FAQ Ist der Bohrer für handgeführte Akkubohrschrauber geeignet? Der MetavCUT Spiralbohrer mit Morsekegel und 11,5 mm Durchmesser ist primär für stationäre Maschinen vorgesehen; im Standard-Bereich kann er bei geeigneter Aufnahme und stabiler Führung auch in kraftvollen handgeführten Geräten verwendet werden, sofern das Gerät ausreichend Leistung liefert. Für welche Werkstoffe ist dieser Bohrer geeignet? Der rollgewalzte HSS-Bohrer von MetavCUT eignet sich für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe bis etwa 900 N/mm² Festigkeit. Was bedeutet rollgewalzt und welche Folgen hat das für die Nutzung? Rollgewalzt beschreibt eine Fertigung, bei der der Rundstab in Form gewalzt wird; das Ergebnis ist erhöhte Zähigkeit und geringeres Bruchrisiko, jedoch eine etwas geringere Rundlaufgenauigkeit im Vergleich zu geschliffenen Bohrern. Wie tief kann mit diesem Bohrer sicher gebohrt werden? Mit einer Spirallänge von 94 mm und einer Gesamtlänge von 175 mm sind übliche Bohrtiefen im Werkstattbereich problemlos möglich; für sehr tiefe Sacklochbohrungen sind spezielle Werkzeuge zu empfehlen. Welches Spitzenwinkel-Verhalten ist zu erwarten? Der Spitzenwinkel 118° sorgt für gutes Zentrierverhalten und eine einfache Eindringung in weichere bis mittlere Metalle; bei sehr harten Werkstoffen kann ein kleinerer Winkel sinnvoll sein.
11,5mm Spiralbohrer, HSS‑G geschliffen, 135° Spitzenwinkel, reduziert 10mm Schaft, 94mm Spirallänge, DIN 338 - MetavCUT
Profitieren Sie von hoher Schnittgeschwindigkeit und deutlich geringerem Kraftaufwand durch den geschliffenen HSS-G Schaft und den Spitzenwinkel 135°, ideal für legierte und unlegierte Stähle. Bestellen Sie den Spiralbohrer direkt über Metav oder kontaktieren Sie unsere Beratung bei technischen Fragen. Spiralbohrer — geschliffener HSS-G Spiralbohrer von MetavCUT Der Spiralbohrer ist ein geschliffener HSS-G Spiralbohrer für präzise Metallbearbeitung an stationären und mobilen Maschinen mit reduziertem Schacht für einfache Spannaufnahme HSS-G geschliffen für präzise Metallbohrungen Durchmesser 11,5 mm mit reduziertem Schaft 10 mm Spitzenwinkel 135° ideal für harte Werkstoffe Spirallänge 94 mm für sicheren Spantransport Norm DIN 338 kurze Spiralbohrer mit Zylinderschaft Höhere Produktivität durch geschliffene Geometrie Die geschliffene HSS-G Geometrie reduziert die Reibung und ermöglicht ein bis zu 40 % schnelleres Bohren bei gleichzeitig etwa 50 % weniger Anpresskraft gegenüber konventionellen HSS-Bohrern. Das Resultat ist weniger Materialverzug, geringere Belastung für Maschine und Bediener sowie eine messbare Zeitersparnis bei Serien- und Einzelarbeiten. Für Anwender bedeutet das mehr Effizienz in Werkstatt und Produktion. Präzision und Materialvielfalt nutzen Der kurze Spiralbohrer erfüllt die Anforderungen der DIN 338 und ist speziell ausgelegt für Metall wie Legierter Stahl, Unlegierter Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff. Der Spitzenwinkel 135° sorgt für kontrolliertes Anbohren in harten Werkstoffen und trägt zu gleichmäßiger Spanformung bei. Die reduzierte Schaftausführung vereinfacht die Spannaufnahme in Bohrfuttern mit 10 mm Kapazität. Geeignet für Werkstatt und industrielle Anwendungen Mit einem Durchmesser von 11,5 mm bewegt sich der Bohrer im Standard-Bereich und eignet sich für vielseitige Einsätze in Werkstatt, Montage und Maschinenbau. Der Spiralweg unterstützt den Spantransport, wodurch die Bohrung sauberer bleibt und Nacharbeit reduziert wird. Handgeführte Maschinen können den Bohrer verwenden, allerdings ist bei hoher Präzision oder tieferen Bohrungen die stationäre Maschine zu bevorzugen, um Rundlaufabweichungen zu vermeiden. Handhabung, Lebensdauer und Sicherheit Bei geschliffenen Bohrern ist Kühlung und angemessene Drehzahl wichtig, da die scharfen Schneiden spröder sein können als gewalzte Werkzeuge. Für tiefe Löcher empfiehlt sich schrittweises Aufbohren oder der Einsatz von Kühlmittel, um Spanstau und Überhitzung zu vermeiden. Regelmäßige Kontrolle von Schneidkanten und ein angepasster Vorschub verlängern die Lebensdauer und sichern konstante Ergebnisse. Für präzise Metallbohrungen empfehlen wir den geschliffenen HSS-G Spiralbohrer von MetavCUT – Bestellungen und technische Beratung direkt über Metav: info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 63115-FDA Bezeichnung: Spiralbohrer Marke: MetavCUT Modellserie: Standard Line Norm: DIN 338 Material: HSS-G Farbe: silber Hersteller: MetavCUT Fakten Durchmesser: 11,5 mm Gesamtlänge: 142 mm Spirallänge: 94 mm Spitzenwinkel: 135° Verpackungseinheit: 1 Besonderheiten Ausführung: geschliffen (HSS-G = geschliffen, CNC-Schliff) Schaftausführung: reduziert 10 mm (abgesetzter Schaft für kleinere Bohrfutter) Anwendungsfeld: Metallbearbeitung Normhinweis: DIN 338 – kurze Spiralbohrer mit Zylinderschaft FAQ Für welche Materialien ist der Spiralbohrer geeignet? Der Spiralbohrer von MetavCUT (Spiralbohrer, SKU 63115-FDA) ist ausgelegt für legierte und unlegierte Stähle, Gusswerkstoffe, Nichteisenmetalle und Hartkunststoff und liefert bei diesen Werkstoffen saubere Bohrbilder. Kann der Bohrer in einem 10-mm-Bohrfutter verwendet werden? Ja, dank der reduzierten Schaftausführung 10 mm passt der MetavCUT Spiralbohrer (Spiralbohrer, SKU 63115-FDA) in Bohrfutter mit 10 mm Spannbereich, ohne dass die Bohrdurchmesserfunktion eingeschränkt wird. Warum ist der Spitzenwinkel 135° vorteilhaft? Ein Spitzenwinkel von 135° am MetavCUT Spiralbohrer bewirkt ein langsameres Eindringen und eine bessere Zentrierung in harten Werkstoffen, wodurch Ausrisse und Überhitzung reduziert werden. Wie kann die Lebensdauer des geschliffenen Bohrers erhöht werden? Kühlmittel, angepasste Drehzahl und moderater Vorschub verbessern Standzeit und Schnittqualität des HSS-G Spiralbohrers von MetavCUT; bei tiefen Bohrungen mehrere Durchgänge empfehlen.
11.1mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill Type N, HSS short, Ø 11.1 mm, 118° tip, black, DIN 338 (MetavCUT) The Twist Drill Type N is a short HSS metal drill designed for stable, precise drilling in steel and other metals with hand and drilling machines. Short design for greater stability HSS construction for high wear resistance Type N geometry optimised for metal drilling 118° tip for reliable centring and penetration Manufactured to DIN 338 for consistent quality Precision and stability for demanding metalwork This short Twist Drill offers enhanced stability through its reduced protrusion length, which minimises deflection during drilling. The combination of a 94 mm spiral length and a 142 mm overall length keeps the drill stiff in the chuck, making it particularly suitable for accurate through-holes in plate and thicker sections. For operations requiring repeatability, the reduced tendency to chatter results in cleaner holes and less rework. Material performance and suitability explained Manufactured from HSS (High Speed Steel), this drill balances hardness and toughness for machining a wide range of metals. HSS is produced to withstand elevated temperatures and maintain cutting edge integrity, which reduces the risk of breakage during standard metalworking tasks. The Type N helix is the classic choice for ferrous and non‑ferrous metals; its geometry supports efficient chip evacuation while remaining easy to regrind when resharpening is required. Application scenarios and user benefits Designed primarily for Drills for metal, the tool performs well in workshop environments using a Hand Drill or Drilling Machine. Professional metalworkers and maintenance technicians benefit from the drill’s reliable centring thanks to the 118° tip angle, which reduces walking on curved or coated surfaces. For precision assembly and maintenance tasks, the short version improves control and decreases the likelihood of tool breakage under lateral loads. Why the short execution and DIN 338 matter The classification under DIN 338 confirms this design as a short twist drill with a cylinder shank, optimised for machine and hand applications where rigidity matters. A shorter flute length increases stiffness and precision, making this execution preferable for demanding steelworking tasks. MetavCUT’s production emphasis on consistent geometry and surface finish helps ensure predictable performance in series drilling and single‑item fabrication. Strong recommendation: For precise metal drilling choose the MetavCUT Twist Drill for its HSS material and Type N design — for personalised technical advice METAV Werkzeuge provides expert support via info@metav-werkzeuge.com, Tel +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40111-FDA Diameter: 11.1 mm Tip angle: 118° Spiral length: 94 mm Overall length: 142 mm Material: HSS (High Speed Steel) Type: Type N Execution: short Colour: black For use with: Hand Drill / Drilling Machine Application: Drills for metal Standard: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill suitable for? The MetavCUT Twist Drill Type N is intended primarily for drilling metal; its HSS composition and classic Type N geometry make it suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and many plastics, providing a reliable solution for workshop and maintenance tasks. Can this Twist Drill be used with a hand drill? Yes, the MetavCUT Twist Drill short execution is suitable for use with a Hand Drill as well as stationary Drilling Machines; the shorter overhang increases rigidity and reduces deflection when operated in portable equipment. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high‑strength workpieces and larger drilling diameters; its form is easy to grind and it withstands higher loads, which makes it the preferred choice for demanding metal drilling operations. Which 3 drill types exist? There are three common drill categories: metal drills, wood drills, and stone/concrete drills.
11.1mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N short HSS‑E, Ø 11.1 mm, 135°, 5% cobalt‑alloyed The Twist Drill is a short Type N HSS‑E metal drill designed for precise, stable drilling in hard materials and manufactured to DIN 338 standards. Twist Drill Type N, short design 11.1 mm Diameter for precise holes 135° Tip for hard materials such as stainless steel HSS‑E with 5% cobalt for increased wear resistance Fully ground shank for high concentricity and accuracy Durable material for demanding metalwork Crafted from HSS‑E with 5% cobalt, this short Twist Drill delivers improved heat resistance and edge stability when drilling tougher alloys. The cobalt alloy raises the red‑hardness of the steel, which means the Cutting Edge keeps its form longer under elevated temperatures. For users this translates to fewer tool changes and more consistent hole quality when working with Alloyed Steel or Stainless Steel. Precision and stability in confined setups Thanks to the reduced overall length and shorter overhang, the short design provides superior stability and less tendency to deflect during drilling. This results in more accurate hole position and improved roundness. The 135° tip angle is optimised for harder materials: it reduces initial cutting forces and improves centring when starting the hole, making the bit particularly suitable for stationary and handheld drilling machines under demanding conditions. Ground geometry and machining quality The Twist Drill is fully ground (HSS‑G style), which gives sharp cutting lips and a precise flute geometry for clean chip evacuation. Ground bores typically produce smoother hole surfaces and tighter tolerances compared with roll‑formed alternatives. For the operator this means easier reaming or finishing and reduced rework when tight bore quality is required. Conformity and recommended applications Manufactured according to DIN 338, the short Twist Drill is intended primarily for metalworking tasks on drilling machines and drilling units. Typical applications include drilling in alloyed and unalloyed Steel, Cast Iron, Non‑ferrous Metals and select Plastics. The Type N flute geometry represents the classic metal drill configuration, optimised for general metal drilling rather than soft wood or masonry. Handling tips and tool life optimisation To prolong tool life and ensure consistent results, use appropriate cutting fluid and moderate feed rates, especially when drilling steels above 6 mm diameter. Short drills are less prone to breakage but still benefit from cooling and stable clamping. If resharpening is required, the ground geometry allows predictable reconditioning, though precision resharpening is recommended to maintain the original tip angle and cutting geometry. Highly recommended: choose the MetavCUT Twist Drill for precision metal drilling and contact METAV Werkzeuge for expert support — if unsure whether this Twist Drill fits your requirements or if further technical data is needed, METAV Werkzeuge offers competent consultation: 📧 info@metav-werkzeuge.com — ☎️ +49 2822 7131930 — ✔️ WhatsApp: +49 170 2837271 Designation: Twist Drill Brand/Manufacturer: MetavCUT Type: Type N Material: HSS‑E Diameter: 11.1 mm Tip angle: 135° Execution: short Overall length: 142 mm Spiral length: 94 mm Shank execution: fully ground Colour: 5% cobalt‑alloyed For drilling machine: Drilling Machine Application: Drills for metal Model series: Standard Line Standard: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill (Type N) is primarily applied for machining high‑strength materials and larger drill diameters; its geometry is easy to sharpen and endures higher loads, making it suitable for demanding metalworking tasks. Which three drill types are commonly distinguished? The three main drill categories are Metal drills, Wood drills and Stone/Concrete drills, each optimised in flute geometry and tip design for their respective materials. Can the MetavCUT Twist Drill be used for drilling wood? A Metal drill such as the MetavCUT Twist Drill can be used in Wood but will generally provide poorer guidance and a less clean finish; however it is easier to resharpen and shows less self‑feeding compared with specialised wood bits.
11.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N short, 11.1 mm, 135° point angle, bright finished, fully ground shank, HSS‑G, DIN 338 (MetavCUT) A short Twist Drill by MetavCUT (Type N) for precise metal drilling in drilling machines and hand drills. Short design for higher stability 11.1 mm diameter for precise holemaking 135° tip for harder materials and reduced wandering HSS‑G fully ground for sharp, clean cuts Conforms to DIN 338 for short Twist Drills Faster, cleaner metal drilling with less feed force The short HSS‑G geometry and fully ground flute profile of this Twist Drill reduce cutting resistance and produce clean chips when drilling metal. Thanks to the reduced cantilever length, the tool bends less and keeps the hole concentric, improving repeatability in serial work. The combination of short design and ground flutes enables significantly faster advance in many steels and alloys while requiring lower feed pressure compared with conventional HSS tools, which makes bench and machine drilling more efficient and less demanding on operators. Better centring and performance in demanding materials A 135° point angle combined with the classic Type N spiral makes this Twist Drill particularly suitable for stainless and harder steels where a blunt tip prevents wandering and increases tool life. The point geometry shortens the initial penetration phase, improving centring without the need for extensive pilot drilling. Conformity with DIN 338 ensures the tool meets standard tolerances and dimensions for short Twist Drills, supporting predictable results in production and maintenance environments. Built for stability in drilling machines and workshop setups With an overall length of 142 mm and a spiral length of 94 mm, the short layout minimises overhang and vibration when used in a drilling machine or hand drilling setup. The fully ground shank improves clamping contact and runout, while the bright finished surface supports smooth chip evacuation. For best results in hard workpiece materials, use appropriate cooling and avoid excessive intermittent impacts; the tool is optimized for machine or stable jig use rather than freehand, high‑shock operations. Who benefits and how to select the right tool Metalworkers, maintenance technicians and toolroom staff benefit from the reliability and repeatability of this short Twist Drill in medium to high hardness metals. Choose this tool when precise hole location, low deflection and good surface finish are priorities. If you are unsure whether the MetavCUT Twist Drill Type N fits your specific application or need additional technical data, METAV Werkzeuge provides expert consultation and support to help you select the correct diameter, grade and machining parameters. Strong recommendation: For precision metalworking, choose the MetavCUT Twist Drill Type N short version and contact METAV Werkzeuge for tailored advice at info@metav-werkzeuge.com or by phone +49 2822 7131930; WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45111-FDA Type: Type N Diameter: 11.1 mm Point angle: 135° Execution: short Overall length: 142 mm Spiral length: 94 mm Shank finish: fully ground Colour: bright finished Material: HSS‑G Norm: DIN 338 Intended for: Drills for metal / Drilling machine use Model series: Standard Line Application: Bohrer für Metall (Drills for metal) Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength materials and larger diameters; its short form is well suited to demanding metal drilling tasks. The ground geometry is easy to resharpen and remains robust under substantial loads, making it a reliable choice for steel, cast iron and other hard materials. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill Type N belongs to the metal drill category and is optimised for ferrous and non‑ferrous metals. Why are Twist Drills re‑pointed? Re‑pointing reduces the cross‑cut at the tip, which lowers friction and therefore reduces required feed forces. For the MetavCUT Twist Drill Type N, re‑sharpening improves centring and maintains cutting efficiency, so the tool enters more smoothly and stays better aligned. Can a Twist Drill be used to drill wood? A metal Twist Drill like the MetavCUT Type N can drill wood, but guidance and finish are inferior compared with dedicated wood drills. It may be useful in a pinch, and it is easier to resharpen, but expect less precise tracking and a rougher hole surface. At what depths is the Twist Drill most used? A solid through‑hole is typically executed with a Twist Drill. For diameters up to about 20 mm and drilling depths up to roughly 100 mm, the Twist Drill is the most commonly used tool. The MetavCUT Twist Drill Type N is optimized for these typical metalworking ranges. What is better, HSS or HSSE? The common belief that HSSE is universally superior to HSS is inaccurate. When choosing between HSS‑G (as used for the MetavCUT Twist Drill Type N) and HSSE, consider the specific working conditions and whether those justify the higher cost of HSSE.
11.2mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill by MetavCUT — Type N, 11.2 mm, 118° tip, HSS, short, black, DIN 338 A Twist Drill Type N designed for precision metal drilling with HSS construction and DIN 338 short execution MetavCUT Type N for precise metal drilling 11.2 mm diameter for common industrial holes Short design for improved stability and accuracy HSS construction for heat and wear resistance Durable HSS construction for demanding metalworking The HSS composition gives this Twist Drill lasting hardness and thermal stability under load. Because High Speed Steel retains cutting performance at elevated temperatures, the user experiences reduced tool wear and more consistent hole quality when machining Steel, Cast Iron or Non-Ferrous Metals. This material choice also facilitates easier regrinding, so the tool life can be extended through maintenance. Stable short design and reliable centring for precise holes A short overall length reduces deflection and improves accuracy during drilling, especially when using a hand or stationary Drilling Machine. The Type N normal spiral geometry together with the 118° tip angle offers good centring on slightly curved or softer surfaces while maintaining efficient chip evacuation. Conforming to DIN 338 ensures consistent dimensions and dependable performance in workshop routines. Suited applications and target users for efficient workflows This Twist Drill is intended primarily as a Drill for Metal, aimed at professional workshops, maintenance technicians and metalworking hobbyists who value repeatable results. The geometry and short execution make it particularly suitable for medium to high-strength steels and general-purpose metal fabrication, where rigidity and hole precision are required under frequent use. Practical guidance to get the best results from the tool To achieve optimal results with the short 11.2 mm HSS Twist Drill, use appropriate cutting speeds and apply light cutting fluid for tougher alloys to reduce heat and extend life. The classic Type N flute profile supports reliable chip removal; nevertheless, keeping feed forces steady and avoiding excessive side loads will minimise breakage risk. Regular inspection and professional resharpening restore cutting geometry and ensure continued centring. Strongly recommended for professionals seeking reliable metal-drilling performance: choose the MetavCUT Twist Drill Type N and contact METAV Werkzeuge for expert advice at info@metav-werkzeuge.com or by phone +49 2822 7131930, WhatsApp +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 40112-FDA Durchmesser: 11.2 mm Spitzenwinkel: 118° Typ: Type N Farbe: black Ausführung: short Norm: DIN 338 Material: HSS Gesamtlänge: 142 mm Spirallänge: 94 mm Für Bohrmaschine: Drilling Machine Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N best used for? The MetavCUT Twist Drill Type N is primarily used for drilling into metal; its HSS construction and Type N spiral make it suitable for machining alloyed and unalloyed steel, cast iron and many non-ferrous materials, offering a balance of cutting performance and regrindability. Can the MetavCUT Twist Drill be used in a hand-held drill? Yes, the short execution of the MetavCUT Twist Drill provides greater rigidity and less deflection, making it appropriate for use in both hand-held Drilling Machines and stationary machines, provided correct speeds and feeds are observed. For what is a Twist Drill used? A Twist Drill is mainly applied in the machining of high-strength workpieces and for larger drill diameters; its shape allows relatively easy sharpening and reliable performance under higher loads. Which three drill types exist? Common drill categories are: Metal drills, Wood drills, and Stone/Concrete drills. Why are Twist Drills pointed? Pointing reduces the cross-edge at the tip of a Twist Drill, significantly lowering friction and thus the required feed forces, while improving centring of the tip in the workpiece. Can a Twist Drill be used to drill wood? A metal Twist Drill such as this can be used in wood, but guidance and finish are generally inferior compared with dedicated wood drills; however, such metal drills are easier to regrind and have less aggressive self-feeding.
11.2mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill (Short) — 11.2 mm, 135° Tip, Type N, 5% Cobalt-Alloyed, HSS‑E, DIN 338 by MetavCUT The Twist Drill short Type N is a precision metal-drilling tool designed for stable, accurate holes in hard materials and machine or handheld drilling applications. Short Design for improved stability 11.2 mm Diameter for precise holemaking 135° Tip for drilling hard materials 5% Cobalt-Alloyed HSS‑E for increased wear resistance Fully Ground Shank for high runout accuracy Precision and strength for demanding metalwork Built for operators who require repeatable results, the HSS‑E construction with 5% Cobalt-Alloyed composition delivers superior heat and wear resistance compared with standard HSS. The 11.2 mm Diameter combined with a 135° Tip Angle shortens punch-in time on harder alloys, while the short overall length reduces vibration and improves concentricity. This results in cleaner holes and longer tool life when drilling Steel, Cast Iron and Non‑Ferrous Metals. Short design that enhances stability and accuracy Because of the reduced overhang, the short execution increases rigidity during drilling and lowers the risk of deflection. The Fully Ground shank and flute geometry ensure excellent concentricity and chip evacuation, which helps to maintain dimensional accuracy even under higher feeds. For precision tasks on stationary or portable machines, this design choice means fewer reworks and more consistent part quality. Suited applications and user groups This Twist Drill Type N is primarily intended for Metalworking applications where axial stability and tool life matter. It is suitable for professional workshops, maintenance departments and fabrication shops needing reliable holemaking in alloyed and unalloyed steels as well as certain non‑ferrous materials and plastics. The short format is particularly useful for confined setups and fixtures where reduced chatter improves results. Why DIN 338 and the chosen geometry matter Manufactured to DIN 338, the short Twist Drill with a 135° point is optimised for harder materials and better centring when starting a hole without pilot operations. DIN 338 describes the standards for short cylindrical shank drills and their production methods; a ground flute drill offers sharper cutting edges and higher runout accuracy compared with rolled variants. For operators less familiar with these terms: DIN 338 is the specification ensuring consistent dimensions and performance across batches. Strong recommendation: Opt for the MetavCUT Twist Drill short Type N when precision, stability and extended tool life are priorities — for detailed technical advice or to confirm suitability for a specific application contact METAV Werkzeuge; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930; WhatsApp: +49 170 2837271 Twist Drill (Short) Brand: MetavCUT SKU: 47112-FDA Diameter: 11.2 mm Tip Angle: 135° Type: Type N Execution: Short Material: HSS‑E Colour / Alloy: 5% Cobalt‑Alloyed Shank Execution: Fully Ground Overall Length: 142 mm Spiral Length: 94 mm Model Series: Standard Line Application: Drills for Metal For Drill Machine: Drilling Machine Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The Twist Drill Type N from MetavCUT is used primarily for machining high‑strength materials and larger hole diameters; its design is easy to regrind and withstands higher loads, making it suitable for demanding metalworking tasks. Which 3 drill types are there? Common drill categories are Metal Drills, Wood Drills and Stone/Concrete Drills; the MetavCUT Twist Drill belongs to the Metal Drills group and is optimised for metal applications.
11.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Die Kombination aus HSS-G, kurzer Ausführung und 135° Spitzenwinkel ermöglicht schnelle, stabile Bohrungen in Stahl und Guss; Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT — kurzer HSS-G Spiralbohrer für Metallbearbeitung Der Spiralbohrer ist eine kurze, geschliffene Ausführung nach DIN 338, entwickelt für präzise Bohrungen in legierten und unlegierten Stahl sowie Gusseisen. Kurze Ausführung nach DIN 338 für höhere Stabilität HSS-G geschliffen für präzise, saubere Bohrlöcher Spitzenwinkel 135° für harte Werkstoffe Zylinderschaft geeignet für Handbohrmaschine Spirallänge 94 mm, Gesamtlänge 142 mm Hohe Standzeit und präzise Bohrbilder durch geschliffenes HSS Ein geschliffener HSS-G-Schneidkörper sorgt für sehr scharfe Schneidkanten und niedrigen Kraftbedarf beim Eintauchen in Metall. Diese Fertigungsweise reduziert das Wanderverhalten beim Anbohren und liefert saubere Bohrlöcher mit hoher Rundlaufgenauigkeit. Kunden profitieren von einer merklichen Zeitersparnis beim Bohren in legierten Stählen, da die Schneidgüte das Vorschubverhalten optimiert und die Nachbearbeitung minimiert. Geeignet für Alltagswerkstatt und stationäre Maschinen Mit einem Durchmesser von 11,2 mm gehört der Bohrer in den Standard-Bereich für Werkstatt und Montage. Er ist ideal für Handgeführte Akkubohrschrauber sowie für stationäre Säulenbohrmaschinen und eignet sich besonders für dünne bis mittlere Bleche, Profile und Flachstahl. Für Serienbohrungen in gehärtetem Material empfiehlt sich dennoch eine Betrachtung alternativer Werkstoffe, da hier wirtschaftlichere Vollhartmetall-Lösungen existieren. Kurzdesign für maximale Stabilität und kontrollierte Spanabfuhr Die kurze Auskraglänge reduziert Schwingungen und erhöht die Kraftübertragung direkt am Schneidende. Durch die Spirallänge von 94 mm werden Späne zuverlässig abgeführt, was vor allem bei tiefen Bohrungen mit moderatem Verhältnis von Tiefe zu Durchmesser vorteilhaft ist. Anwender erhalten ein Werkzeug, das stabile Führung mit guter Spanabfuhr verbindet, ohne unnötige Überstände im Bohrfutter zu riskieren. Praxisempfehlungen für sicheren Einsatz und beste Ergebnisse Für harte Werkstoffe empfiehlt sich ein Spitzenwinkel von 135° sowie die Nutzung von Kühlschmierstoff, um Wärmeeintrag und vorzeitigen Verschleiß zu vermeiden. Bei größeren Bohrungen sollte nach den allgemeinen Regeln vorgedrillt werden, um die Querschneide zu entlasten. Die kurze, geschliffene Ausführung leistet beste Dienste bei präzisen Einzel- und Kleinserienarbeiten sowie bei der Bearbeitung von Guss und Sintermetall. Setzen Sie auf den kurzen HSS-G Spiralbohrer von MetavCUT Standard Line für präzise Metallbohrungen und kontaktieren Sie uns bei Fragen per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 45112-FDA Hersteller: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Norm: DIN 338 Ausführung: kurz Daten Durchmesser: 11,2 mm Gesamtlänge: 142 mm Spirallänge: 94 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G (geschliffen, hohe Schneidgüte) Schaftausführung: geschliffen (Zylinderschaft) Typ: Typ N (Normalspirale) Farbe: blank (bright finished) Für Bohrmaschine: Handbohrmaschine FAQ Wie lässt sich die Lebensdauer des Bohrers verlängern? Die Lebensdauer des Spiralbohrers von MetavCUT lässt sich durch den Einsatz von Kühlschmierstoffen, angepasste Schnittgeschwindigkeit und kontrollierten Vorschub verbessern; regelmäßige Überprüfung auf Gratbildung verlängert die Standzeit. Ist der Bohrer für Edelstahl geeignet? Der kurze, geschliffene HSS-G Spiralbohrer (MetavCUT, SKU 45112-FDA) mit 135° Spitzenwinkel eignet sich für viele harte Werkstoffe, bei hochlegierten oder gehärteten Edelstählen sind jedoch spezielle HSS-Varianten oder Hartmetallbohrer zu prüfen. Welche Maschinenaufnahmen passen zum Schaft? Der Zylinderschaft des Spiralbohrers ist für Handgeführte Akkubohrschrauber und viele stationäre Bohrmaschinen geeignet; bei Bedarf sollte die Spannfuttergröße der Maschine kontrolliert werden. Brauche ich ein Vorbohren für 11,2 mm? Bei genauer Lage oder dünnwandigen Bauteilen empfiehlt sich ein Anpunkten oder Vorbohren mit kleinem Zentrierbohrer, um ein Abwandern zu vermeiden; für viele Anwendungen im Standard-Bereich kann direkt gebohrt werden. Wodurch unterscheidet sich die kurze Ausführung von Standardbohrern? Die kurze Ausführung der MetavCUT Spiralbohrer reduziert Auslenkung und verbessert die Kraftübertragung, wodurch sie besonders bei präzisen Einzel- und Serienarbeiten in Metall deutlich stabilere Bohrbilder liefert.
11.3mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill (Type N) by MetavCUT — 11.3 mm, 118° tip, HSS, Short, Black, DIN 338 The Twist Drill Type N is a short HSS drill bit designed for precise metal drilling with hand drilling machines, offering improved stability and centring for demanding workshop tasks. Short design for high stability and precision HSS construction for resilience in metalworking 118° tip angle for reliable centring on curved surfaces Conforms to DIN 338 for standardised short twist drills Robust material for durable metalworking performance Deriving strength from HSS (High Speed Steel), this twist bit delivers reliable wear resistance when cutting ferrous and non-ferrous metals. The hardened composition reduces deformation under load and enables repeated re-sharpening, so users benefit from a longer service life and consistent hole quality. This results in fewer tool changes and more continuous work progress in metal fabrication. Short form factor for precise, vibration‑reduced drilling A short design minimises overhang and improves rigidity, which significantly reduces wobble and vibration during operation. The compact geometry makes the bit particularly suitable for confined setups or fixture work where stability matters more than reach. Reduced deflection translates into straighter holes and better tolerance adherence in precision assemblies. Tip geometry explained: easier centring and controlled feed The 118° tip provides a balanced compromise between penetration and centring, making it well suited for softer metals and general metalworking tasks. A narrower tip angle aids initial bite and positioning, which simplifies manual alignment on curved or uneven surfaces. For users less familiar with drill geometry: a smaller tip angle generally helps with starting accuracy, while larger angles speed through harder materials. Intended use and machine compatibility Engineered for use with a drilling machine or hand-operated drill chucks, this Type N twist bit is optimised for machining steel, cast iron, non-ferrous metals and many plastics. The short flute length enhances control when working on bench-mounted drills or portable machines. For bulk or deep-hole applications, longer variants would be preferable; this short version focuses on repeatable precision in workshop and production environments. Practical recommendation for everyday workshop use Operators seeking a reliable general‑purpose metal drill will appreciate the combination of Type N geometry and DIN 338 conformity, which ensures predictable behaviour and compatibility with standard toolholders. The bit’s finish and geometry allow straightforward re-grinding when required, keeping maintenance simple and cost-efficient over the tool’s lifetime. Consider the MetavCUT Twist Drill Type N as a dependable choice for precise metal drilling; for personalised technical advice or help selecting the right diameter and length, contact METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930, or via WhatsApp at +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 40113-FDA Typ: Type N Durchmesser: 11.3 mm Spitzenwinkel: 118° Ausführung: Short Farbe: Black Material: HSS Norm: DIN 338 Gesamtlänge: 142 mm Spirallänge: 94 mm Anwendung: Drills for metal For drilling machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Is the MetavCUT Twist Drill Type N suitable for hand drilling machines? Yes, the MetavCUT Twist Drill Type N is designed for compatibility with hand drilling machines and bench drills, where its short length increases rigidity and improves hole quality; it performs well for metalworking tasks when used with appropriate speeds and lubrication. What is a Twist Drill used for? The MetavCUT Twist Drill is primarily used for machining high-strength materials and larger hole diameters in metalworking; its form is easy to re-grind and it withstands higher loads, which makes it suitable for demanding workshop and production applications. Which three drill types are there? Common drill categories include metal drills, wood drills and stone/concrete drills, with the MetavCUT Twist Drill positioned among specialist metal drills optimised for steel and related materials.
11.3mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill Type N — Short, 11.3 mm, 135° Tip, HSS‑E, 5% Cobalt‑Alloyed, DIN 338, Fully Ground Shaft (MetavCUT) The Twist Drill Type N is a short metal drill designed for precise, stable drilling in hardened and alloyed steels using a hand or drilling machine. Short design for increased stability and precision 135° tip angle for hard materials like stainless steel Made of HSS‑E with 5% cobalt‑alloyed for wear resistance Fully ground shank for high concentricity and clean holes Outstanding Material Strength for Demanding Metalwork The short HSS‑E construction with 5% cobalt‑alloyed composition provides superior Wear Resistance and heat stability compared with standard HSS. This makes the tool especially suitable for drilling in alloyed and unalloyed steel as well as Cast Iron and non‑ferrous Metals. The reduced risk of edge softening at elevated temperatures helps prolong Tool Life when appropriate coolant and speeds are used. Improved Stability and Drilling Accuracy Thanks to the short overall length and reduced overhang, this short variant minimises Deflection and vibration during machining, resulting in more accurate hole diameters and better Surface Finish. The Fully Ground Shank ensures excellent concentricity in the chuck, which is important for clean, round holes and reduced runout on bench or portable Drilling Machines. Optimised Geometry for Hard Materials A 135° tip angle and Type N normal spiral geometry mean easier entry and longer tool life when working with harder materials such as Stainless Steel. The ground flute geometry (HSS‑G) creates sharp cutting edges and aids in chip evacuation; for users less familiar, ground drills are manufactured by grinding the flute and point, producing high precision but requiring careful handling to avoid brittle failure under shock loads. Typical Applications and Suitable Machines This short Twist Drill is intended primarily for Metal Drilling tasks on stationary and portable Drilling Machines. It performs well for through‑holes and standard production work up to medium depths and is recommended for jobs demanding stability and repeatable results. For delicate or very thin materials, alternative point geometries or pilot drilling may be advisable to prevent pull‑through. Who Benefits Most from This Design Professionals and workshops that require reliable, repeatable hole quality in metal fabrication, maintenance or toolmaking will benefit most from this short, cobalt‑alloyed design. The tool is aimed at users needing robust performance on tougher alloys, while still being straightforward to resharpen when necessary. Choose MetavCUT precision: opt for the short Twist Drill for stable, accurate metal drilling — METAV Werkzeuge offers expert advice via info@metav-werkzeuge.com, phone +49 2822 7131930 and WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand/Manufacturer: MetavCUT SKU: 47113-FDA Type: Type N Diameter: 11.3 mm Tip Angle: 135° Material: HSS‑E Colour/Alloy: 5% cobalt‑alloyed Execution: Short Shaft/Shank Execution: Fully Ground Spiral Length: 94 mm Overall Length: 142 mm For Machine: Drilling Machine Application: Drills for metal Model Series: Standard Line Norm: DIN 338 Packaging Unit: 5 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and where does the MetavCUT Type N perform best? The Twist Drill from MetavCUT, Type N, is primarily used for machining metal; it is especially suited to high‑strength materials and larger hole diameters where the short design improves stability and reduces the tendency to bend under load. Can the MetavCUT Twist Drill Type N be used for woodworking? A MetavCUT Type N metal drill can be used in wood, but metal drills offer less guidance and a coarser finish compared with dedicated Wood Drills; they are easier to regrind and have less self‑feeding tendency. For what purpose are Twist Drills mainly used? Twist Drills are mainly applied to the machining of high‑strength materials and larger diameters; this geometry is easy to resharpen and withstands higher loads while remaining suitable for precise metalworking. Which three drill types are there? Typical categories are Metal Drills, Wood Drills and Stone/Concrete Drills. Why are Twist Drills pointed? Pointing reduces the cross‑edge at the tip, lowering friction and the necessary feed forces; a pointed tip also centres the drill more reliably in the workpiece. At what drilling depths is the Twist Drill most commonly used? A solid through hole is commonly made with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. If you are unsure whether this tool meets your technical requirements or need further specifications, METAV Werkzeuge offers comprehensive, expert advice — contact info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271).
11.3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N, 11.3 mm, 135° point, Short HSS‑G, Bright Finished, DIN 338 (MetavCUT) The Twist Drill is a short Type N drill designed for precision metalworking with Drilling Machine applications and hardened materials. Short design for high stability Ground HSS‑G for precise, clean holes 135° point angle suited for hard metals Conforms to DIN 338 for short twist drills Fully ground shank for reliable clamping Short HSS‑G construction delivers faster, cleaner drilling A short, fully ground HSS‑G Twist Drill reduces overhang and increases rigidity, which directly improves runout and hole accuracy. The ground geometry produces very sharp cutting edges and a high concentricity that yields clean bores in metal; in practice this can mean up to 40% faster drilling and 50% less feed force compared with conventional HSS drills. This construction makes the tool particularly effective for demanding machining tasks where precision and tool life matter. Designed for metal, hardened materials and machine use With a 135° point angle, the drill penetrates harder materials more effectively and reduces initial skidding when starting the hole. The Type N normal spiral geometry is optimised for metalwork and performs well in Alloyed and Unalloyed Steel, Cast Iron, Sintered Iron, Tempered Castings, Non‑Ferrous Metals and Hard Plastics. Use on stationary or moving machine tools with appropriate coolant to maintain cutting edge life and hole quality. Stability and handling tailored to workshop demands The shorter overall and spiral length reduces bending moments, improving stability during operation and minimising chatter on smaller machines or manual setups. A fully ground shank ensures secure clamping in the chuck and consistent concentricity. This combination suits workshops and professional users who prioritise repeatable accuracy and reduced rework, especially when working with tight tolerances. Conformance, tip geometry and recommended practice Manufactured to DIN 338 for short twist drills, this Type N Twist Drill follows standardised dimensions and quality benchmarks for short cylinder‑shank tools. Ground (HSS‑G) drills are typically sharper and provide better surface finish but can be more brittle than rolled variants; consequently, they are best used with adequate cooling and on stable machines. The Type N spiral is the classic metal drill geometry and should be selected when a robust, general‑purpose metalworking drill is required. Strong recommendation: Choose MetavCUT precision Twist Drills for demanding metalwork — METAV Werkzeuge provides expert advice and comprehensive support: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 45113-FDA Diameter: 11.3 mm Point angle: 135° Type: Type N Execution: Short Colour/Finish: Bright finished Shaft finish: Fully ground Spiral length: 94 mm Overall length: 142 mm Material: HSS-G Standard: DIN 338 Application: Drills for metal For use with: Drilling Machine Model series: Standard Line Packaging unit: 5 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Twist Drill Type N? The MetavCUT Twist Drill Type N is primarily intended for metalworking; it excels when drilling alloyed and unalloyed steels, cast irons and other hard materials where a short, rigid tool is required for precision holes. Can the MetavCUT Twist Drill Type N be used on handheld drills? The MetavCUT Twist Drill Type N is designed mainly for machine use; while it can be used in robust handheld drills for certain tasks, optimal accuracy and tool life are achieved on stationary or machine‑tool setups with proper clamping and cooling. For what is a Twist Drill used? A Twist Drill is mainly applied in the machining of high‑strength materials and for larger drill diameters; its geometry is relatively easy to resharpen and withstands higher loads. Which three drill types exist? There are three main drill types: Metal drills, Wood drills, and Stone/Concrete drills. Why are Twist Drills sharpened (pointed)? Point sharpening reduces the cross‑cut at the tip of the Twist Drill, lowering friction and required feed force while improving centring of the tip in the workpiece. Can you drill wood with a Twist Drill? A Metal drill such as the Twist Drill can be used in wood, but it offers less guidance and a lower finish quality; however, it is easier to resharpen and exhibits less self‑feeding compared with wood‑specific bits. For which drilling depths is the Twist Drill most used? A solid through‑hole is typically created with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most commonly used tool. What is better, HSS or HSSE? The common belief that HSSE steels are universally superior to HSS is incorrect; the choice should be based on working conditions and whether the additional cost of HSSE is justified.
11.4mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Spiralbohrer (Twist Drill) — Type N, 11.4 mm, 118°, HSS, short, black, DIN 338 by MetavCUT The Spiralbohrer (Twist Drill) is a short Type N HSS drill designed for precise metal drilling, ideal for use with hand and stationary drilling machines. Short design for increased stability and precision HSS material suitable for steel and cast iron 118° point angle for improved centring on curved surfaces Conforms to DIN 338 for short twist drills Suitable for hand and stationary drilling machines Precision and durability from High Speed Steel Built from HSS (High Speed Steel), this short Twist Drill delivers elasticity and resistance during standard metalworking tasks. The material choice reduces the risk of breakage for bore diameters under 6 mm and remains effective on alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. This results in reliable performance during repetitive drilling, ensuring clean holes and longer tool life for everyday workshop demands. Practical advantages of the short design A shorter overall length increases stability and reduces deflection during machining, which improves hole accuracy and surface quality. In tight setups or on portable tools the compact execution minimises chatter and makes this Twist Drill particularly suited to confined workspaces. For professionals requiring repeatable precision, the reduced overhang translates directly into fewer rejects and less rework on assemblies. Designed for metalwork — Type N and 118° explained The Type N designation denotes the classic normal spiral geometry for metal drilling, optimised for cutting through steel and similar materials. The 118° point angle offers a compromise between fast entry and accurate centring, especially useful on slightly curved or uneven surfaces. For users less familiar with drill geometry: a smaller point angle aids initial positioning, while a larger angle shortens the penetration time; this Twist Drill balances both for general metalworking. Conformity to DIN 338 and recommended applications Manufactured to the DIN 338 specification for short cylindrical-shank twist drills, this tool is intended primarily for metalworking on rotating stationary and mobile machine tools. The standardised dimensions and options for roll-formed or ground production ensure interchangeability and predictable performance. Use this Twist Drill when precise, stable boreholes in metal are required, particularly where rigidity and repeatable centring matter. For professional advice and to ensure the MetavCUT HSS short Twist Drill is the right choice for your application, contact METAV Werkzeuge for competent consultation by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 — METAV Werkzeuge will assist with technical details and ordering. Technical Data Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 40114-FDA Diameter: 11.4 mm Point angle: 118° Spiral length: 94 mm Overall length: 142 mm Execution: short Type: Type N Material: HSS Colour: black Intended application: Drills for metal For drilling machine: Drilling Machine / Hand drilling machine compatible Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The MetavCUT Twist Drill (Spiralbohrer) is primarily applied to the machining of high-strength materials and larger drill diameters; its form is easy to sharpen and it withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The main categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised for ferrous and non-ferrous metals. Why are twist drills sharpened? Sharpening reduces the transverse cutting edge at the tip of the Twist Drill, which lowers friction and therefore requires less feed force; at the same time the tip centres better in the workpiece for more accurate drilling. Can a metal Twist Drill be used for wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and hole finish are inferior compared with dedicated wood drills; however, they are easier to resharpen and exhibit less self-feeding behavior. For which drilling depths is the Twist Drill most used? A through hole in solid material is typically made with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The common assumption that HSSE steels are categorically superior to normal HSS is incorrect; when choosing between HSS and HSSE for the MetavCUT Twist Drill, assess whether the working conditions justify the higher initial cost of HSSE.
11.4mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Der MetavCUT Spiralbohrer kombiniert kurze Ausführung und HSS‑E‑Werkstoff für hohe Stabilität und präzise Metallbohrungen; die geschliffene Schaftgeometrie und der 135° Spitzenwinkel sorgen für saubere Bohrbilder in legierten und unlegierten Stählen. Nutzen Sie die Kombination aus Präzision, Standzeit und Maschinenkompatibilität für verlässliche Ergebnisse in Werkstatt und Produktion. Bestellen Sie direkt über Metav oder klären Sie technische Fragen per eMail. Spiralbohrer 11,4 mm von MetavCUT (kurze Ausführung) Spiralbohrer 11,4 mm für präzise Metallbohrungen in stationären und handgeführten Maschinen, ausgelegt nach DIN 338. MetavCUT Spiralbohrer 11,4 mm für Metallbohrungen Kurze Ausführung für höhere Stabilität beim Bohren HSS‑E mit 5% Kobalt für bessere Wärmebestandigkeit Geschliffener Schaft für präzise Rundlaufgenauigkeit 135° Spitzenwinkel für härtere Werkstoffe wie Edelstahl Präzision und Stabilität für anspruchsvolle Metallarbeiten Die kurze Ausführung reduziert die Auskraglänge und minimiert dadurch Vibrationen sowie Biegeversatz. In Kombination mit dem geschliffenen Schaft ergibt sich eine deutlich verbesserte Rundlaufgenauigkeit, was besonders bei Bohrungen in Stahl und Gusseisen präzise, maßhaltige Ergebnisse liefert. Für den Durchmesser von 11,4 mm fällt der Bohrer in den Standard‑Bereich (2,0–13,0 mm) und eignet sich daher auch für den Einsatz mit Handbohrmaschinen unter moderater Belastung. Werkstoff und Fertigung für höhere Standzeit Der Einsatz von HSS‑E mit 5% Kobalt erhöht die Warmfestigkeit und Verschleißresistenz im Vergleich zu einfachem HSS. Die geschliffene Fertigung sorgt für scharfe Schneidkanten und saubere Spanabfuhr, womit präzise Bohrungen in harten Werkstoffen erreichbar sind. Bei starker Beanspruchung empfiehlt sich die Nutzung von Kühlschmierstoff, um die Standzeit weiter zu verbessern und thermische Einflüsse zu reduzieren. Geeignete Anwendungen und Maschinenkompatibilität Konzipiert nach DIN 338, ist diese Ausführung für allgemeine Metallbearbeitung ausgelegt: Bohren in legierten und unlegierten Stählen, Nichteisenmetallen und Kunststoffen. Die Bauform passt für Handbohrmaschine sowie stationäre Säulenbohrmaschinen; bei hoher Maßgenauigkeit empfiehlt sich vorheriges Zentrieren mit einem Ansetzbohrer. Tiefe Bohrungen über das Fünffache des Durchmessers sollten vermieden oder in Stufen ausgeführt werden, um zuverlässige Spanabfuhr zu gewährleisten. Sichere Anwendung und Verarbeitungshinweise Der 135° Spitzenwinkel erleichtert das Anbohren harter Werkstoffe und reduziert Wanderneigung beim Kontakt mit gehärtetem Material. Arbeiten mit gleichmäßiger Vorschubkraft und geeigneter Drehzahl erhöht die Bohrqualität und vermindert Bruchrisiko. Bei der Lagerung sorgt trockene, saubere Umgebung für längere Schneidkantenqualität; beschädigte Bohrer nicht weiterverwenden, um Werkzeug- und Bauteilschäden zu vermeiden. Empfehlung: MetavCUT Spiralbohrer mit HSS‑E und 135° Spitzenwinkel für präzise Metallbohrungen direkt über Metav beziehen; bei technischen Fragen eMail an info@metav-werkzeuge.com oder Telefon +49 2822 7131930 nutzen Produktmerkmale Artikelnummer: 47114-FDA Bezeichnung: Spiralbohrer Hersteller: MetavCUT Modellserie: Standard Line Norm: DIN 338 Daten Durchmesser: 11,4 mm Gesamtlänge: 142 mm Spirallänge: 94 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-E (Schnellarbeitsstahl, kobaltlegiert) Schaftausführung: geschliffen (vollständig geschliffen für hohe Rundlaufgenauigkeit) Typ: Typ N (Normalspirale) Farbe: 5% kobaltlegiert Für Bohrmaschine: Handbohrmaschine Ausführung: kurz FAQ Für welche Werkstoffe ist der MetavCUT Spiralbohrer geeignet? Der MetavCUT Spiralbohrer (Spiralbohrer, HSS‑E, SKU 47114-FDA) eignet sich für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe; bei sehr harten Werkstoffen empfiehlt sich Kühlung und angepasste Schnittgeschwindigkeit. Kann der Spiralbohrer mit einer Handbohrmaschine benutzt werden? Ja, der Spiralbohrer von MetavCUT ist für Handbohrmaschine ausgelegt; bei erhöhter Präzision voranbohren oder eine Säulenbohrmaschine verwenden, um Abweichungen zu minimieren. Warum ist der geschliffene Schaft vorteilhaft? Ein geschliffener Schaft liefert schärfere Kanten und bessere Rundlaufgenauigkeit, was sauberere Bohrbilder ermöglicht; beim MetavCUT Spiralbohrer unterstützt dies exakte Passungen und Maßhaltigkeit. Welche Bedeutung hat der 135° Spitzenwinkel? Der 135° Spitzenwinkel des MetavCUT Spiralbohrers reduziert die Anbohrkräfte bei harten Werkstoffen und verbessert die Zentrierung, besonders bei Edelstahl und hochfesten Stählen. Wie verlängere ich die Lebensdauer des Bohrers? Standzeit lässt sich durch geeigneten Kühlschmierstoff, moderate Drehzahlen und gleichmäßigen Vorschub deutlich erhöhen; der HSS‑E‑Werkstoff mit Kobalt ist bereits für höhere Temperaturen ausgelegt.
11.4mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N short, Ø 11.4 mm, 135° point angle, Bright Finished, HSS‑G, DIN 338 (MetavCUT) A Twist Drill Type N short for Drilling Machine, designed for precise metalworking and hard materials. Short Design for increased Stability and Precision Optimised for Metal: suitable for Steel and Cast Iron 135° Point Angle reduces Entry Force and Wear Ground HSS‑G for sharp Cut and high Roundness Conforms to DIN 338 for standardised Quality Short Length delivers greater stability and precision for metalwork Die kurze Bauform dieses Twist Drill verbessert die Stabilität beim Bohren durch eine geringere Auskraglänge, wodurch das Vibrieren reduziert und die Maßhaltigkeit der Bohrung erhöht wird. Für Anwender bedeutet das weniger Ausschuss und präzisere Ergebnisse beim Bearbeiten von Steel, Cast Iron und legierten Werkstoffen. Die geschliffene Geometrie sorgt für scharfe Schneiden, sauberen Spanabtrag und eine hohe Rundlaufgenauigkeit. Ground HSS‑G material speeds up drilling and lowers thrust Der Einsatz von HSS‑G (geschliffener Schnellarbeitsstahl) ermöglicht ein schnelleres Bohren bei geringerer Anpresskraft: bis zu 40 % höhere Schnittgeschwindigkeit und deutlich reduzierte Vorschubkräfte sind typisch. Das Resultat ist ein effizienterer Arbeitsablauf auf stationären oder beweglichen Maschinen und eine längere Standzeit der Werkzeugschneide bei geeigneter Kühlung. 135° Point Angle and Type N spiral for hard materials Der 135° Point Angle ist speziell für härtere Werkstoffe ausgelegt; er verringert die Anbohrzeit und verbessert die Führung in dickwandigen oder harten Teilen. In Kombination mit der Type N Normalspirale bietet der Bohrer eine ausgewogene Spanabfuhr und ist damit besonders geeignet für das Bohren in Alloyed Steel, unlegiertem Stahl, Sintereisen und Hartkunststoff. Standard conformity and recommended applications for professionals Die Norm DIN 338 definiert die Spezifikationen für kurze Spiralbohrer mit Zylinderschaft und garantiert Austauschbarkeit sowie reproduzierbare Qualität. Diese Ausführung ist primär für das Bohren in Vollmaterial ausgelegt und wird bei Durchmessern bis hin zu 11,4 mm und Bohrtiefen eingesetzt, bei denen Stabilität und Präzision im Vordergrund stehen. METAVCUT positioniert dieses Werkzeug für professionelle Werkstätten und industrielle Anwendungen. Strong recommendation: Choose the MetavCUT Twist Drill Type N short for precision metal drilling and contact METAV Werkzeuge for expert advice and support — Email: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 45114-FDA Diameter: 11.4 mm Point Angle: 135° Type: Type N Execution: short Colour: Bright Finished Material: HSS‑G Shaft Finish: fully ground Spiral Length: 94 mm Overall Length: 142 mm Model Series: Standard Line Application: Drills for metal For Machine: Drilling Machine Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Twist Drill Type N short? The MetavCUT Twist Drill Type N short is primarily used for machining high‑strength materials and larger bore diameters. Its short design and ground geometry make it easy to sharpen and able to withstand higher loads, which is why it performs well in demanding Metal operations. Which three drill types exist? The main categories are Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill Type N short belongs to the Metal drills group and is optimised for Steel and cast materials. Why are Twist Drills countersunk (pointed)? Pointing reduces the cross‑edge at the tip of a Twist Drill. By sharpening the tip the friction forces are substantially lowered, which reduces required thrust. At the same time the tip centres better in the Workpiece, improving accuracy.
11.5mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 11.5 mm, 118° Point, HSS, Short, Black, DIN 338 (MetavCUT) The Twist Drill Type N from MetavCUT is a short HSS metalworking drill with an 11.5 mm Diameter and a 118° Point Angle, designed for precise, stable Drilling in metal on Drilling Machines and Hand Drills. Short Design for Greater Stability HSS Material for Metal Drilling 118° Point Angle for Reliable Centring DIN 338 Compliant for Consistent Quality Consistent Precision and Reduced Deflection for Metalworking Die kurze Bauform dieses Twist Drill sorgt für erhöhte Stabilität und geringere Auslenkung beim Bohren in Metall. Dank der kurzen Gesamtlänge und der reduzierten Auskraglänge lässt sich das Werkzeug präziser führen, was zu saubereren Bohrungen und weniger Nacharbeit führt. Die Kombination aus HSS Material und der Bauart nach DIN 338 ermöglicht eine konstante Fertigungsqualität sowie eine längere Standzeit bei üblichen Metallbearbeitungsaufgaben. Practical Performance: Centre, Pierce, and Hold Mit einem Spitzenwinkel von 118° bietet dieser Metallbohrer gute Zentriereigenschaften und einen ruhigen Vorschub, besonders bei legierten und unlegierten Stählen sowie Nichteisenmetallen. Der Typ N steht für die bewährte Normalspirale, ideal für klassische Metallbohrungen. Anwender profitieren von einem gleichmäßigen Spanfluss und einfacher Nachschärfbarkeit, wodurch der Einsatz in Werkstätten und auf Baustellen gleichermaßen wirtschaftlich ist. Who Benefits Most: Workshops and Skilled Hobbyists Entwickelt für Anwender, die häufig in metallischen Werkstoffen arbeiten, eignet sich der MetavCUT Twist Drill besonders für Mechaniker, Schlossereien und ambitionierte Heimwerker. Die kurze Ausführung reduziert Bruchrisiken bei kleineren Durchmessern und erhöht die Präzision beim Einstechen auf gewölbten Flächen. Für Nutzer, die Wert auf Wiederholgenauigkeit legen, bietet dieses Werkzeug eine robuste Lösung für wiederkehrende Produktions- und Reparaturarbeiten. Material, Norm and Care: What the Specifications Mean for You Der Einsatz von High Speed Steel (HSS) macht diesen Bohrer elastisch und widerstandsfähig gegen Sprödbruch bei Standardaufgaben. Die Norm DIN 338 beschreibt kurze Spiralbohrer mit Zylinderschaft und steht für definierte Fertigungs- und Prüfmerkmale. Zur Pflege empfiehlt sich regelmäßiges Entgraten und bei Bedarf Nachschärfen; rollgewalzte Varianten behalten ihre Form länger, während geschliffene Bohrer besonders präzise Schneidkanten bieten. We recommend the MetavCUT Twist Drill Type N for demanding metalworking tasks — for expert advice or technical clarification contact METAV Werkzeuge: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 40115-FDA Diameter: 11.5 mm Point Angle: 118° Execution: Short Spiral Length: 94 mm Overall Length: 142 mm Material: HSS Type: Type N Norm: DIN 338 Colour: Black Application: Drills for Metal Suitable For: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The MetavCUT Twist Drill (Type N) is primarily used for machining high-strength materials and larger hole diameters; its form is easy to sharpen and withstands higher loads, making it suitable for demanding metalworking tasks. Which 3 drill types exist? When choosing a drill, consider the three basic types: Metal Drill, Wood Drill and Masonry/Concrete Drill — the MetavCUT Twist Drill belongs to the Metal Drill category and is optimised for those applications. Can the MetavCUT Twist Drill be used in a hand drill or only in a drilling machine? The MetavCUT Twist Drill (Type N) is compatible with standard drilling machines and can be used in hand drills when the chuck and operating conditions are suitable; for precision or heavy-duty metalwork a stationary Drilling Machine is recommended.
11.5mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Kompakte Bauweise und HSS-E Material sorgen für hohe Stabilität und saubere Bohrbilder in Stahl. Die kurze Ausführung mit 135° Spitzenwinkel reduziert Vibrationen und verringert das Bruchrisiko bei feineren Bohrungen. Bestellen Sie den Spiralbohrer direkt über Metav oder kontaktieren Sie unsere Beratung bei technischen Fragen. Spiralbohrer von MetavCUT — kurzer HSS-E Bohrer (Typ N) Spiralbohrer ist ein kurzer HSS-E Metallbohrer für präzise Bohrungen in legiertem und unlegiertem Stahl und für den Einsatz an Handbohrmaschinen Kurz-Ausführung mit hoher Stabilität HSS-E mit 5% Kobaltlegierung für höhere Standzeit Geschliffener Schaft für präzisen Rundlauf 135° Spitzenwinkel für harte Werkstoffe Geeignet für Handbohrmaschine und stationäre Maschinen Mehr Stabilität durch reduzierte Auskraglänge Die kurze Ausführung reduziert die Auskraglänge und sorgt damit für deutlich geringere Schwingungen beim Bohren. Das Ergebnis ist eine verbesserte Bohrbildqualität und eine geringere Neigung zum Verbiegen, was besonders bei Durchmessern im Standardbereich relevant ist. Für Anwender bedeutet das weniger Ausschuss und eine zuverlässige Wiederholgenauigkeit bei Serien und Einzelfertigung. Präzision und Schneidkantengeometrie für Metall Der geschliffene Schaft und die schlanke Spiralgeometrie bieten hohe Rundlaufgenauigkeit, die besonders bei Passungen und Durchgangsbohrungen wichtig ist. Die Kombination aus HSS-E Werkstoff und 135° Spitzenwinkel unterstützt das Anbohren in harten Werkstoffen ohne übermäßiges Auslaufen der Bohrung. Erklärend: HSS-E steht für Schnellarbeitsstahl mit Kobalt, was Wärmebeständigkeit und Verschleißfestigkeit erhöht. Vielseitige Einsetzbarkeit in Werkstatt und Montage Der Bohrer eignet sich für die Bearbeitung von legiertem und unlegiertem Stahl, Gusseisen, Nichteisenmetallen sowie Kunststoffen. Durch die Auslegung nach DIN 338 ist die Handhabung an Handbohrmaschinen ebenso möglich wie an stationären Bohrmaschinen. Bei hoher Präzision empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer, um das Wandern auf der Oberfläche zu minimieren. Material, Fertigung und Normen erklären Nutzen Die Fertigung als geschliffener Spiralbohrer erzeugt scharfe Schneiden und eine saubere Spanabfuhr, was saubere Bohrlöcher begünstigt. Die Bezeichnung Typ N steht für die Normalspirale, die universell für Metall eingesetzt wird. Die Norm DIN 338 klassifiziert kurze Spiralbohrer mit Zylinderschaft und stellt damit klare Maßstäbe für Austauschbarkeit und Qualität sicher. Bestellen Sie den MetavCUT Spiralbohrer mit der SKU 47115-FDA über Metav oder klären Sie technische Details per E‑Mail info@metav-werkzeuge.com bzw. Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 47115-FDA Bezeichnung: Spiralbohrer Marke: MetavCUT Serie: Standard Line Hersteller: MetavCUT Norm: DIN 338 Fakten Durchmesser: 11,5 mm Gesamtlänge: 142 mm Spirallänge: 94 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Stück Besonderheiten Material: HSS-E (Schnellarbeitsstahl mit Kobalt) Schaftausführung: geschliffen Typ: Typ N (Normalspirale) Farbe: 5% Kobaltlegiert Ausführung: kurz Für Bohrmaschine: Handbohrmaschine SKU: 47115-FDA FAQ Für welche Materialien ist der Bohrer geeignet? Der MetavCUT Spiralbohrer aus HSS-E mit 5% Kobaltlegierung eignet sich für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe. Die Zusammensetzung sorgt für erhöhte Wärmebeständigkeit beim Bohren in härteren Werkstoffen. Ist der Spiralbohrer für Handbohrmaschinen geeignet? Ja, die kurze Ausführung und die Auslegung nach DIN 338 machen den Bohrer für Handbohrmaschine sowie stationäre Maschinen geeignet. Bei Handgeführten Arbeiten empfiehlt sich ruhiger Vorschub und geeignete Kühlschmierstoffe. Was bedeutet geschliffen und welche Vorteile bringt das? Geschliffen bedeutet, dass die Geometrie der Spannuten und Schneiden durch Schleifen erzeugt wurde. Das liefert sehr scharfe Kanten, hohe Rundlaufgenauigkeit und saubere Bohrlöcher, wie sie der Spiralbohrer mit SKU 47115-FDA bietet. Wann ist ein 135° Spitzenwinkel sinnvoll? Ein Spitzenwinkel von 135° reduziert das Ausspitzen beim Anbohren harter Werkstoffe und sorgt für kontrollierten Vorschub. Diese Geometrie ist besonders sinnvoll beim Bohren von Edelstahl und gehärteten Stählen. Muss vorgebohrt werden oder direkt gebohrt werden? Für den Durchmesser von 11,5 mm kann in vielen Anwendungen direkt gebohrt werden. Bei besonders präzisen Passungen empfiehlt sich Anpunkten mit einem Zentrierbohrer, um das Wandern zu minimieren.
11.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill (Drill Bit) – 11.5 mm, 135° tip, Extra-Long, Bright Finished, Fully Ground, HSS-G, DIN 1869 The Twist Drill (Drill Bit) is an extra-long HSS-G cutting tool for Drilling Machine applications, engineered for deep, precise holes in hard metals. Extra-long design for deep drilling 11.5 mm diameter for medium holes 135° tip geometry for hard materials Fully ground HSS-G for precise runout Conforms to DIN 1869 for deep-hole work Deep-hole performance for demanding metalwork The Extra-Long design of this Twist Drill delivers significant reach with a Spiral Length of 195 mm and a Overall Length of 280 mm, allowing deep-hole machining where standard lengths fall short. The 11.5 mm diameter provides a balance between stability and material removal rate, making the drill particularly suitable for through-holes and blind holes in tougher materials. For professionals facing restricted access or long reach requirements, this geometry reduces the need for extensions or special setups and helps maintain concentricity over long distances. Precision geometry that improves hole quality Manufactured as a Fully Ground HSS-G tool, the Twist Drill features ground flutes and cutting edges achieved by CNC grinding rather than forming. This results in very sharp cutting lips, high runout accuracy, and clean, burr-minimised holes in metal. The ground geometry typically enables up to 40% faster drilling and requires 50% less feed force compared with conventional rolled HSS types, which translates into less operator effort and steadier machining in stationary or machine-mounted operations. Optimised tip angle and material compatibility With a 135° tip angle, this Twist Drill is tuned for harder materials and reduces initial chattering and wandering at the start of a bore. The tool is suitable for alloyed and unalloyed steels, cast iron, sintered iron, non-ferrous metals and hard plastics; it can handle steels up to roughly 1000 N/mm² under appropriate cutting conditions. The larger tip angle shortens the effective lead-in time and supports better centring on tough surfaces, which is critical when consistent hole position and diameter tolerance are required. Practical handling, cooling and machining notes Because the Twist Drill is a ground HSS tool, it achieves high dimensional precision but can be more brittle than rolled designs; therefore machine mounting and the use of coolant are recommended for heavy-duty or interrupted cuts. Use moderate cutting speeds and consistent feed to exploit the HSS-G benefits and extend tool life. For drilling in very hard or abrasive materials, consider pecking cycles or intermittent withdrawal to clear chips effectively and avoid built-up edge formation. Who benefits from this tool and when to choose it This Twist Drill is aimed at workshop professionals, toolmakers and maintenance technicians who require reliable deep-hole drilling with minimal setup complexity. Its combination of DIN 1869 conformity, robust HSS-G material and long reach makes it well suited for demanding production, repair and prototyping tasks where precision and access are decisive factors. For customers uncertain about compatibility with a specific Drilling Machine or material, expert guidance is available from METAV Werkzeuge. Strongly recommended: choose the MetavCUT Extra-Long HSS-G Twist Drill for deep, precise metal drilling and contact METAV Werkzeuge for personalised technical advice at info@metav-werkzeuge.com or by phone +49 2822 7131930 (WhatsApp +49 170 2837271) Designation: Twist Drill (Drill Bit) Brand: MetavCUT SKU: 32115-FDA Diameter: 11.5 mm Tip Angle: 135° Execution / Length: Extra-Long, Overall Length 280 mm, Spiral Length 195 mm Shank Finish: Fully Ground Surface Finish: Bright Finished Material: HSS-G Standard: DIN 1869 Application: Drills for Metal / Drilling Machine use Model Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT used for? The MetavCUT Twist Drill (Drill Bit) is mainly applied to machining high-strength materials and larger hole diameters; its design is easy to regrind and endures higher loads, making it ideal where deep or demanding metal drilling is required. Which three drill types exist? Commonly recognised drill types are: metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for such applications. Why are Twist Drills tip-splitted (reground/pointed)? The point modification reduces the cross-cut at the tip of a Twist Drill, cutting friction and therefore lowering the required feed forces while improving centring of the tip in the workpiece. Can a metal Twist Drill be used to drill wood? A metal Twist Drill like the MetavCUT Twist Drill can be used in wood, but guidance is less precise and hole finish typically is inferior; the metal drill is easier to resharpen and shows less self-feeding compared with dedicated wood bits.
11.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Die extra lange Bauform in Verbindung mit geschliffener HSS-G-Geometrie und dem 135° Spitzenwinkel sorgt für tiefe, präzise Bohrungen in festem Metall und reduziert den Kraftaufwand deutlich; bei Fragen hilft die technische Beratung von Metav gerne weiter. Spiralbohrer HSS-G 11,5 mm extra lang von MetavCUT Der Spiralbohrer von MetavCUT ist ein extra langer, geschliffener HSS-G-Bohrer für tiefe Metallbohrungen in legierten und unlegierten Stählen sowie Gusswerkstoffen. HSS-G geschliffen für präzise Metallbohrungen Extra lang Gesamtlänge 365 mm für tiefe Löcher Spitzenwinkel 135° für harte Werkstoffe Spiralänge 250 mm für sichere Spanabfuhr Geeignet für Handbohrmaschine, Norm DIN 1869 Langlebige Präzision dank geschliffener HSS-Geometrie Die HSS-G-Ausführung kombiniert hohe Schnittschärfe mit exakter Rundlaufgenauigkeit durch CNC-Schliff. Das Ergebnis sind saubere Bohrlöcher mit geringem Wanderverhalten, besonders in harten Werkstoffen. Durch den geschliffenen Schaft entstehen sehr scharfe Kanten, die das Eindringen erleichtern, gleichzeitig ist die Bruchgefahr im Hochbeanspruchten Einsatz höher, weshalb stationäre Nutzung mit Kühlung empfohlen wird. Tiefe Bohrungen sicher und effizient ausführen Mit einer Gesamtlänge von 365 mm und einer Spiralänge von 250 mm wurde dieser Bohrer für tiefe Anwendungen konzipiert; die Tieflochspirale nach DIN 1869 unterstützt die Spanabfuhr auch unter erschwerten Bedingungen. Die Konstruktion ermöglicht ein bis zu 40 % schnelleres Bohren bei 50 % weniger Anpresskraft im Vergleich zu konventionellen HSS-Bohrern, was Bearbeitungszeit und Ermüdung reduziert. Werkstoffempfehlungen und Praxistipps für die Werkstatt Der Bohrer eignet sich für Grauguss, legierte und unlegierte Stähle bis circa 1000 N/mm², Gusseisen, Sintereisen und Nichteisenmetalle. Für hohe Präzision wird ein Anpunkten mit Zentrierbohrer empfohlen; bei Durchmessern im Standardbereich reicht in vielen Fällen direktes Bohren. Kühlung und langsame Vorschübe bei harten Werkstoffen optimieren Standzeit und Oberflächenqualität. Einsatzbereich und Zielgruppe für Profis Konzipiert für Werkstatt, Maschinenbau und Instandsetzung, bietet dieser extra lange Bohrer Vorteile bei tiefen Durchführungen und schwer zugänglichen Stellen. Die Kombination aus Länge, geschliffener Spiralgeometrie und 135° Spitzenwinkel macht ihn besonders geeignet für Anwender, die saubere Durchgangs- und Sacklochbohrungen in anspruchsvollen Metallen benötigen. Empfehlung: Für besonders tiefe und präzise Metallbohrungen den geschliffenen HSS-G Bohrer von MetavCUT wählen; bei technischen Fragen oder Anpassungswünschen erreichen Sie die Metav-Beratung per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 33115-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Standard Line Ausführung: extra lang Norm: DIN 1869 Fakten Durchmesser: 11,5 mm Gesamtlänge: 365 mm Spiralänge: 250 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffener Hochleistungsstahl) Schaft-Ausführung: geschliffen (fully ground) Für Bohrmaschine: Handbohrmaschine Farbe: blank (bright finished) Tieflochspirale für extra tiefe Löcher FAQ Für welche Werkstoffe eignet sich dieser Bohrer am besten? Der MetavCUT Spiralbohrer HSS-G 11,5 mm (SKU 33115-FDA) ist ausgelegt für Grauguss, legierte und unlegierte Stähle bis etwa 1000 N/mm² sowie für Gusseisen und Nichteisenmetalle. Ist der Bohrer auch für Handgeführte Maschinen geeignet? Ja, der Bohrer ist für die Nutzung an einer Handbohrmaschine vorgesehen; bei sehr tiefen oder kraftintensiven Bohrungen wird jedoch stationärer Einsatz mit Kühlung empfohlen. Welche Vorteile bringt der geschliffene Schaft gegenüber gewalzten Bohrern? Geschliffene Bohrer wie der MetavCUT HSS-G bieten höhere Schnittschärfe und bessere Rundlaufgenauigkeit, was sauberere Bohrlöcher ermöglicht; die Kehrseite ist eine erhöhte Sprödigkeit, daher empfiehlt sich kontrollierte Anwendung und Kühlung. Brauche ich ein Vorbohren für 11,5 mm? Im Standardbereich kann meist direkt gebohrt werden; für höchste Maßhaltigkeit empfiehlt sich jedoch ein Zentrierbohrer vor dem Aufbohren, insbesondere bei dünnen oder empfindlichen Bauteilen. Welchen Spitzenwinkel sollte ich wählen und warum? Der 135° Spitzenwinkel des MetavCUT Spiralbohrers ist speziell für härtere Werkstoffe geeignet, da er die Anbohrzeit reduziert und die Standzeit bei zähen Materialien verbessert.
High-performance drill bits for demanding production
Drill bits designed for industrial manufacturing where precision, repeatability and tool life are decisive. Based on a spectrum from HSS and kobalt-alloyed hss-e for universal use to solid carbide drills for high-speed, high-precision serial production, this range covers applications from general engineering to automotive supplier work.
Why these drill bits are essential in the workshop and on the machining centre
Function and behaviour:
- primary use: creating accurate cylindrical holes
- typical machines: CNC machining centres, lathes and drill presses
- key design aspects: optimised chisel edge, defined point angles, flute geometry for reliable chip evacuation
Technical advantages and process benefits:
- reduced feed forces through optimised point geometry
- improved heat control with advanced coatings and, where specified, internal coolant supply
- extended tool life using solid carbide variants and multilayer coatings such as TiN / TiAlN
- process security on challenging materials thanks to tailored materials and geometries
Concrete benefits that boost productivity and quality
- predictable tool life and fewer tool changes, lowering machine downtime
- stable hole quality and consistent tolerances across long runs
- efficient chip control and thermal management for safe deep-hole and hardened-material drilling
- suitability across a wide material range, reducing the need for multiple specialised tools
Metav as a reliable partner for high-precision tooling
Metav combines decades of sector expertise with a broad, dependable offering from its Emmerich facility. With over 48,000 customers and more than 250,000 products, Metav positions its range of drill bits, twist drills and indexable drills as a practical, quality-first choice for procurement managers and production engineers seeking dependable supply and technical competence.
Technical data (at a glance)
- material: HSS, kobalt-alloyed hss-e, solid carbide
- coatings: TiN, TiAlN, advanced nanocoatings
- coolant option: internal coolant feed where specified
- typical applications: mild steel, high-alloy stainless steel, cast iron, non-ferrous metals, technical plastics, hardened materials (use solid carbide variants)
- tool types available: twist drills, solid carbide drills, indexable drills, centre and pilot drills, step drills
FAQ
What is the difference between hss and solid carbide drill bits?
HSS drill bits offer toughness and resistance to breakage for general machining, while solid carbide drills provide higher wear resistance and are the preferred choice for high-speed, high-volume machining and hardened materials.
Which coatings improve tool life for industrial drilling?
Coatings such as TiN and TiAlN increase surface hardness and thermal stability; when combined with the correct drill geometry and, if available, internal coolant, they significantly extend the service life of drill bits.
Can these drill bits be used on CNC machining centres for deep holes?
Yes. Drill bits designed with optimised flute geometry and internal coolant supply are suited to deep-hole machining on CNC machining centres, ensuring controlled chip evacuation and heat management.
How should I choose between twist drills, solid carbide drills and indexable drills?
Select twist drills for general-purpose drilling, solid carbide drills for high-speed and hardened-material applications, and indexable drills for large-diameter holes where insert changes offer economic advantages.
Why choose Metav for drill bits and drilling solutions?
Metav offers a comprehensive selection of drill bits, twist drills and indexable drills combined with sector expertise, centralised supply from Emmerich and proven reliability across thousands of industrial customers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com