Efficient shaft cutters and ball nose cutters for versatile milling
Shaft cutters and ball nose cutters serve as robust rotating tools for roughing, face milling, corner milling and slotting, offering economical replacement of indexable inserts rather than whole solid tools. Available in versions with internal coolant to feed lubricant directly to each cutting edge or without internal coolant relying on external nozzles, these cutters ensure effective chip evacuation and thermal control suited to standard materials or deep pocket and cavity work. By preventing chip re-cutting and protecting cutting edges, they deliver higher feed rates, improved surface finish and extended tool life in demanding metalworking applications.
25mm Solid Shank Milling Cutter for XNKU 06T3 Indexable Inserts With Internal Coolant, 4 Teeth - Teknik Makina
Take advantage of the combination of internal coolant, a 25 mm shank and replaceable indexable inserts to keep machining stable and cost-effective; order direct via Metav Werkzeuge or consult our specialists for application-specific advice. Insert milling cutter S780-2TM by Teknik Makina — internal coolant, 25 mm shank Insert milling cutter S780-2TM designed for slotting and peripheral milling with XNKU 06T3 indexable inserts; suitable where rigid clamping and efficient chip evacuation are required. Internal coolant for stable chip evacuation 25 mm shank for rigid clamping Compatible with XNKU 06T3 inserts (Palbit) Reliable, modular cutting with replaceable inserts The indexable system provides a cost-effective way to maintain cutting performance: worn edges are exchanged rather than the entire tool, which reduces downtime and tooling expenditure. The cutter accepts XNKU 06T3 indexable inserts, a widely used geometry, allowing easy sourcing and fast replacement. This modular approach delivers consistent surface quality across batches while simplifying inventory management for production and maintenance teams. Improved cooling and process stability for longer tool life Integrated internal coolant channels direct cutting fluid to the cutting zone, improving chip evacuation and reducing thermal load on the inserts. As a result, machining runs exhibit more stable cutting forces and extended tool life, especially in interrupted cuts or harder workpieces. Combined with the 25 mm shank and robust body, the design helps maintain concentricity and reduce chatter, enabling predictable feed and speed settings in CNC operations. Practical handling and quick maintenance at the bench The cutter features 4 cutting edges, secured with Torx T8 screws (size M2.5x5.5), which streamlines insert changes and tightens to repeatable torque settings. With an overall length of 180 mm and 100 mm cutting length, the tool balances reach and rigidity for many workshop setups while weighing just 0.578 kg, easing handling and tool changes. The compatibility with Palbit inserts ensures straightforward procurement and interchangeability within existing tooling systems. Contact Metav Werkzeuge for a tailored recommendation on Teknik Makina insert milling cutters and to confirm the right insert grade for the intended application — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: S780-2TM Product type: Insert milling cutter Manufacturer: Teknik Makina Facts Diameter: 25 mm Overall length: 180 mm Weight: 0.578 kg Shank diameter: 25 mm Cutting length on shank: 100 mm Number of cutting edges: 4 Special features Internal coolant For XNKU 06T3 indexable inserts Compatible insert supplier: Palbit Torx key: T8 Torx screw: M2.5x5.5 FAQ Which inserts fit this milling cutter? The insert milling cutter accepts XNKU 06T3 indexable inserts; it is specified to work with Palbit insert grades for broad material coverage. Does the tool provide through-coolant delivery? Yes, the S780-2TM cutter is equipped with internal coolant channels to direct fluid to the cutting edge and support effective chip evacuation. What are the key dimensions to check for fixturing? Check the 25 mm shank diameter, 180 mm overall length and 100 mm cutting length to ensure sufficient stick-out and secure clamping in the toolholder. How are inserts secured and replaced? Inserts are fastened with Torx T8 screws (M2.5x5.5); the arrangement allows quick, repeatable changes and straightforward maintenance. Is this cutter suitable for rigid machining setups? Yes, the combination of a 25 mm shank, modest overall length and balanced mass (approx. 0.578 kg) makes the cutter suitable for rigid clamping and stable CNC milling operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Cutter for BLMP 0603 Indexable Inserts 200mm Overall Length With Internal Cooling - Teknik Makina
Take advantage of the internal coolant and BLMP 0603 compatibility to reduce cycle times and prolong insert life; combined with a robust shank Ø25 mm, this cutter delivers stable machining across a range of applications. Order the shank cutter directly via Metav Werkzeuge or request specialist advice from our consultants. Shank cutter for BLMP 0603 indexable inserts — 26 mm, internal coolant (Teknik Makina) The Shank cutter for BLMP 0603 indexable inserts is a coolant-fed indexable milling solution designed for workshop and production environments where repeatability, fast serviceability and secure clamping are required. 26 mm diameter, 200 mm overall length Internal coolant for controlled chip evacuation Compatible with BLMP 0603 inserts, Taegutec fit Shank Ø25 mm and 4 cutting edges Faster cycles through indexable technology The use of indexable inserts provides a clear productivity advantage: worn cutting edges are replaced in seconds, which minimises machine downtime and reduces per-part tooling cost. The tool’s 26 mm diameter and balanced geometry support stable cutting conditions, while the four cutting edges share the load to extend insert life. For operations that prioritise output and consistent chip control, this design yields measurable efficiency gains without sacrificing process reliability. Consistent surface quality with coolant-fed machining Built-in internal coolant channels direct cutting fluid to the cutting zone for improved cooling and chip evacuation, which stabilises cutting temperatures and helps avoid built-up edge. The result is more consistent surface finishes and predictable tool wear. Combined with the robust shank Ø25 mm, the configuration enhances rigidity in clamping systems, translating to fewer chatter marks and reproducible results across batches. Compatibility and maintenance designed for uptime Compatibility with BLMP 0603 indexable inserts and the specification for Taegutec-compatible seats simplifies spare part logistics and sourcing. Insert retention uses M3x6.2 Torx screws and a T8 Torx key, permitting swift insert changes with common workshop tools. The tool’s 200 mm overall length and 40 mm cutting length balance reach and stiffness, enabling flexible use in both face and light profile milling while keeping maintenance straightforward and fast. Contact Metav Werkzeuge for tailored application guidance and to secure the Teknik Makina shank cutter (SKU S482-1TM) for immediate supply from our Emmerich warehouse Technical data Article number: S482-1TM Brand: Teknik Makina Product type: Shank cutter (indexable) Label: 26mm Schaftfräser BLMP 0603 L200mm mit Innenkühlung Core specifications Diameter: 26 mm Overall length: 200 mm Shank diameter: 25 mm Cutting length: 40 mm Number of cutting edges: 4 Weight: 0.771 kg Features & compatibility Internal coolant: yes Indexable inserts: BLMP 0603 Compatible insert brand: Taegutec Torx screw: M3x6.2 Torx key: T8 FAQ Which indexable inserts are compatible with this cutter? This cutter accepts BLMP 0603 indexable inserts; the seating is compatible with Taegutec-style inserts as specified for the Teknik Makina model S482-1TM. Is there internal coolant feed on the tool? Yes — the tool features internal coolant channels to direct cutting fluid to the insert cutting edge, improving cooling and chip evacuation for more consistent machining. What shank size is required in the toolholder? The shank diameter is 25 mm, so a holder or collet rated for Ø25 mm is required to achieve the intended rigidity and repeatability. How many cutting edges does the cutter provide and what is the benefit? The cutter uses 4 cutting edges, which distribute cutting forces across inserts to improve tool life and enable smoother material removal under moderate depths of cut. Which Torx key and screw are used for insert clamping? Insert clamping is secured with M3x6.2 Torx screws and requires a T8 Torx key for exchange operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Cutter For LNMU 0303 Indexable Inserts With Internal Coolant, 150mm Overall Length - Teknik Makina
Take advantage of the cutter's internal coolant, precise compatibility with LNMU 0303 indexable inserts and a rigid 25 mm shank for enhanced stability and reproducible results in serial production. Order the tool directly via Metav Werkzeuge or contact our consultants for application-specific advice. 26 mm shank milling cutter S686-1TM — for LNMU 0303 indexable inserts, internal coolant (Teknik Makina) 26 mm shank milling cutter S686-1TM designed for reliable indexable-insert milling in CNC operations, combining coolant-fed performance with a rigid shank and versatile cutting length Internal coolant for optimised tool cooling Compatible with LNMU 0303 indexable inserts 26 mm cutting diameter, 25 mm shank 60 mm cutting length for versatile operations Deliver consistent production results with compatible indexable inserts The S686-1TM is engineered around the LNMU 0303 insert system to provide a predictable machining cycle time and straightforward insert changeover. Compatibility with established insert geometries means fewer process variables and faster setup. The combination of a 26 mm cutting diameter and a 25 mm shank reduces runout sensitivity, delivering consistent radial engagement and repeatable cutter behaviour across batches. For shops aiming for stable cycle times, this configuration supports higher feed rates without sacrificing surface finish. Maintain tool life and improve chip control through internal coolant The tool’s internal coolant channel directs cutting fluid precisely to the insert pocket, assisting with chip evacuation and temperature control at the cutting edge. With 4 cutting edges and a 60 mm effective cutting length, the cutter balances material removal rate and edge life; operators can increase cutting parameters where the machine and workholding permit. For materials that generate heat quickly, targeted coolant flow reduces flank wear and helps maintain insert geometry for longer, lowering overall tooling cost per component. Rigid shank and secure fastening for reliable clamping A robust design with 150 mm overall length and a substantial shank diameter provides axial and radial stiffness, reducing vibration during machining. The tool weighs 0.61 kg, a value that contributes to a stable dynamic balance when installed in the spindle. Assembly and insert retention use a M2.5x7 Torx screw operated with a T8 Torx key, enabling quick, repeatable insert changes with minimal risk of incorrect torque. This secure clamping arrangement supports reliable operation in medium-duty finishing and light roughing applications. Practical benefits for workshop workflows Designed for easy integration into existing tool inventories, the cutter supports inserts from Tungaloy, simplifying procurement and spare-part stocking. The combination of internal coolant, a long cutting length and a compact shank diameter helps reduce unplanned tool changes and rework, contributing to improved uptime on multi-shift production schedules. For engineers evaluating process improvements, the tool’s predictable performance makes it suitable for both prototype runs and series production. Contact Metav Werkzeuge for tailored application advice on the S686-1TM — our specialists in Emmerich provide specification support and delivery coordination to get the right cutter to the workbench quickly Technical Data SKU: S686-1TM Type: Shank milling cutter Manufacturer: Teknik Makina Compatible insert: LNMU 0303 Compatible insert manufacturer: Tungaloy Facts Diameter: 26 mm Overall length: 150 mm Shank diameter: 25 mm Cutting length (shank-side): 60 mm Cutting edges: 4 Weight: 0.61 kg Torx screw: M2.5x7 Torx key: T8 Special features Internal coolant Indexable-insert system compatibility Robust shank for reduced runout Quick-change Torx fastening system FAQ Which inserts fit this cutter? The S686-1TM is designed for LNMU 0303 indexable inserts; compatible inserts from Tungaloy are suitable for standard applications. Does the cutter provide internal coolant? Yes, the tool features internal coolant channels to direct fluid to the insert pocket and aid chip evacuation. What shank and cutting diameters are provided? The cutter has a 25 mm shank and a 26 mm cutting diameter. What are the overall and cutting lengths? Overall length is 150 mm with a 60 mm effective cutting length on the shank side. Which screw and key are required for insert clamping? Insert clamping uses a M2.5x7 Torx screw, tightened with a T8 Torx key. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
26mm Cutter for LOGU 0303 Indexable Inserts 4-Flute 60mm Cutting Length, 25mm Shank - Teknik Makina
Take advantage of precise indexing and robust shank dimensions for reliable milling performance; the 26 mm cutting diameter paired with compatibility for LOGU 0303 indexable inserts ensures efficient changeover and consistent results. Order the tool directly via Metav Werkzeuge or consult the Metav team for application advice. 26 mm shank cutter for LOGU 0303 indexable inserts (Teknik Makina) The 26 mm shank cutter is a purpose‑built indexable‑insert milling tool for CNC applications, offering secure Torx fixation and a 200 mm overall length for versatile machining setups 26 mm cutting diameter Compatible with LOGU 0303 inserts Shank Ø 25 mm, overall length 200 mm Four cutting edges for stable milling Reliable compatibility and quick insert changes for uninterrupted production The design focuses on compatibility with LOGU 0303 indexable inserts, providing a predictable tooling standard that reduces setup time and simplifies inventory management. The Torx T8 fixation with an M3x7 screw secures each insert reliably, which helps maintain cutting stability and repeatability during high‑volume runs. For operations that value fast indexable replacement and minimal downtime, this configuration supports orderly shift handovers and consistent component quality. Robust shank geometry for secure clamping and vibration control With a 25 mm shank diameter and 200 mm overall length, the cutter offers a balance between reach and rigidity. The substantial shank supports firm clamping in standard tool holders and reduces the risk of deflection during face and slot milling. The tool’s four cutting edges distribute cutting forces evenly, which contributes to smoother surface finish and longer insert life under constant feed conditions. These geometric attributes are particularly beneficial in batch production where tool stability affects part tolerances. Clear performance indicators for process planning and optimisation Key measurable specifications—such as the 26 mm cutting diameter and 60 mm cutting length—enable precise process planning and allow engineers to calculate material removal rates and tool engagement more accurately. The tangible data helps in selecting feeds and speeds appropriate for the intended machine and workpiece, supporting efficient cycle times and predictable tool change intervals. Using known parameters reduces the need for trial runs and accelerates qualification of machining programmes. Practical operation and service considerations for workshop workflows The cutter’s standardised fixing system (Torx T8 / M3x7) simplifies maintenance tasks and spare‑parts stocking, while the indexed insert concept minimises costly regrinding downtime. The tool arrives as a ready‑to‑fit shank cutter compatible with Kyocera‑grade inserts of the LOGU 0303 family, enabling straightforward integration into existing tooling estates. For procurement teams, the standard SKU S684TM makes reordering and inventory tracking unambiguous. Contact Metav Werkzeuge for tailored advice on integrating this Teknik Makina shank cutter into production processes and to confirm availability from our Emmerich stock. Technical Data Article number: S684TM Brand: Teknik Makina Label: 26mm shank cutter LOGU 0303 L200mm eClass: 21180806 Facts Cutting diameter: 26 mm Shank diameter: 25 mm Cutting length (shank cutting): 60 mm Overall length: 200 mm Number of cutting edges: 4 Weight: 0.811 kg Torx key: T8 Torx screw: M3x7 Special features Compatible with LOGU 0303 indexable inserts Suitable for Kyocera insert systems Indexable‑insert shank cutter design SKU S684TM Category: Shank cutter FAQ Which insert type fits this cutter? The cutter accepts LOGU 0303 indexable inserts; it is supplied for use with Kyocera‑compatible insert systems and secured with the specified Torx fixation. What are the key dimensions to check for holder compatibility? Relevant dimensions are cutting diameter 26 mm, shank Ø 25 mm, and overall length 200 mm; verify holder bore and projection to ensure secure clamping. How many cutting edges are available and what is the cutting length? The tool has four cutting edges and a cutting length of 60 mm, which supports even load distribution and stable milling. Is a specific screw or tool required for insert changes? Insert replacement uses a T8 Torx key and an M3x7 screw, matching standard workshop tool sets for quick service. What is the SKU for reordering and stock management? Reorder using SKU S684TM to ensure the correct configuration and compatibility are supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Cutter For XNKT 0604 Indexable Inserts 3 Flutes 25mm Shank 40mm Cutting Length 150mm Overall - Teknik Makina
Benefit from the combination of a 26 mm cutting diameter and a 25 mm shank that deliver stable machining with XNKT 0604 indexable inserts, ensuring predictable cycle times and simple insert changes. Order the shaft milling cutter directly via Metav Werkzeuge or consult their specialists for application advice. Schaftfräser S840TM — Shaft milling cutter, 26 mm diameter, 25 mm shank (Teknik Makina) The Schaftfräser S840TM is a shaft milling cutter designed for indexable-insert machining with XNKT 0604 inserts, suitable for general face and shoulder milling tasks in production and job-shop environments. 26 mm cutting diameter 25 mm shank diameter 40 mm cutting length Compatible with Korloy XNKT 0604 inserts 90° cutting angle Reliable indexable-insert performance for consistent output The cutter is optimised for repeatable results when used with XNKT 0604 inserts, providing a straightforward replacement routine that reduces downtime. With a 26 mm diameter and 40 mm cutting length, the tool balances material removal rate and tool rigidity to maintain stable cutting forces. In practice, this translates to fewer unexpected interruptions during batch runs and a predictable tool life profile, which supports production planning and cost estimation. Designed shank geometry for secure clamping and runout control A 25 mm shank ensures solid clamping in standard toolholders and helps to reduce runout under high spindle speeds. The combination of the shank dimension and the 150 mm overall length gives a compact tool overhang for many milling setups, improving stiffness compared with longer alternatives. Clear specification of these dimensions supports correct holder selection and helps avoid vibration-related marks on workpieces. Efficient insert change and serviceability for workshop uptime The cutter uses a Torx fastening with an M3x7 screw and a T8 key, allowing fast, repeatable insert changes without specialised tools. Compatibility with Korloy XNKT 0604 indexable inserts means a broad choice of chipbreakers and grades for different materials; choosing the appropriate insert grade optimises surface finish and cutting economy. This modularity reduces inventory burden while maintaining the flexibility to adapt to various workpiece alloys. Practical advantages for day‑to‑day machining operations Featuring 3 cutting edges and a 90° cutting angle, the tool is suitable for standard face and shoulder milling where square-cut profiles are required. The overall weight of 0.572 kg contributes to manageable handling and secure balancing in automated tool-change systems. Clear, measurable specifications help purchasing and production engineers to integrate the cutter into jigs and fixtures with confidence, ensuring reliable, repeatable machining across shifts. For procurement and technical guidance on the S840TM shaft milling cutter from Teknik Makina, contact Metav Werkzeuge — purchase and expert advice are available via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical Data Article number: S840TM Manufacturer: Teknik Makina Designation: Schaftfräser for XNKT 0604 Indexable Inserts Numbers Diameter: 26 mm Shank diameter: 25 mm Cutting length: 40 mm Number of cutting edges: 3 Overall length: 150 mm Weight: 0.572 kg Cutting angle: 90° Special features Compatible with Korloy XNKT 0604 indexable inserts Torx screw: M3x7 Torx key: T8 FAQ Which indexable inserts fit this cutter? The cutter accepts XNKT 0604 indexable inserts; Korloy variants for that insert type are compatible with the S840TM. What are the key dimensions for toolholder selection? Relevant dimensions for holder choice are a 25 mm shank diameter, 26 mm cutting diameter and 150 mm overall length, as listed for the S840TM. How many cutting edges does the tool have and what cutting angle is provided? This milling cutter is specified with 3 cutting edges and a 90° cutting angle, suitable for face and shoulder milling operations. Which fastening parts are required for insert changes? Insert clamping uses a Torx screw sized M3x7 and the corresponding T8 Torx key for secure and repeatable fastening on the S840TM. Is the tool weight relevant for balancing in tool magazines? Yes — the tool weight is 0.572 kg, a value to consider when programming automatic tool-change systems or checking spindle balance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm End Mill for 4NKT 06 Indexable Inserts With Internal Coolant, 3 Flutes - Teknik Makina
Benefit from the combination of a 26 mm cutting diameter, integrated internal coolant, and compatibility with 4NKT 06 indexable inserts for stable, efficient milling and reduced tooling costs; order the shaft milling cutter directly via Metav Werkzeuge or consult our specialists for application-matched recommendations. Shaft milling cutter S476-1TM — 26 mm, internal coolant, for 4NKT 06 indexable inserts (Teknik Makina) The Shaft milling cutter S476-1TM is an indexable-insert milling tool engineered for face and shoulder milling in industrial metalworking, designed to accept 4NKT 06 inserts for economical and repeatable cutting performance. 26 mm cutting diameter for stable engagement Internal coolant for enhanced chip evacuation Compatible with 4NKT 06 Taegutec indexable inserts 25 mm shank with 200 mm overall length Stable machining through optimised geometry and rigidity The cutter’s 26 mm diameter and 25 mm shank deliver a robust interface with the spindle, reducing vibration and improving surface finish during interrupted and continuous cuts. With three cutting edges, the design balances material removal rate and chip load per edge, which helps maintain consistent cutting forces and prolongs insert life. For production environments where repeatability matters, this construction gives a measurable increase in process stability and part-to-part precision. Quick indexable-insert changes to cut downtime and costs Using proven 4NKT 06 indexable inserts (compatible with Taegutec) the tool enables rapid insert replacement without regrinding whole cutters, resulting in lower tooling costs and predictable cycle times. Inserts are secured with M3x6.2 Torx screws using a T8 key, allowing controlled clamping torque and straightforward servicing at the machine. This modular approach is particularly advantageous in batch production or when multiple pocket geometries are required across different jobs. Directed coolant and chip control for longer service intervals The integrated internal coolant supplies lubricant and coolant directly to the cutting edge, which improves chip evacuation and reduces thermal load on the insert seat. A 30 mm effective cutting length provides a practical balance between reach and rigidity, helping to avoid excessive deflection in deeper pockets. Together, these features contribute to extended tool life and more consistent tool performance across long production runs. Request tailored tooling advice from Metav Werkzeuge for the Teknik Cutting Tools S476-1TM to ensure optimal insert selection and coolant setup for the intended application. Technical data Article number: S476-1TM Product type: Shaft milling cutter Label: 26 mm shaft milling cutter for 4NKT 06 L200 mm with internal coolant Manufacturer: Teknik Makina Facts Diameter: 26 mm Shank diameter: 25 mm Cutting length (shank): 30 mm Overall length: 200 mm Weight: 0.815 kg Number of cutting edges: 3 Special features Internal coolant Compatible with 4NKT 06 indexable inserts (Taegutec) Torx screw: M3x6.2 Torx key: T8 FAQ Which indexable inserts fit this cutter? The shaft milling cutter accepts 4NKT 06 indexable inserts; compatibility with Taegutec inserts is specified for the S476-1TM. Does the tool provide internal cooling? Yes — the S476-1TM features internal coolant to deliver lubricant directly to the cutting zone, improving chip evacuation and thermal control. What are the key dimensions of the cutter? Diameter 26 mm, shank diameter 25 mm, cutting length 30 mm, overall length 200 mm, weight 0.815 kg for the S476-1TM. How are inserts clamped on this cutter? Inserts are secured with M3x6.2 Torx screws; the required key size is T8, enabling secure and repeatable clamping on the S476-1TM. For which machining tasks is this cutter suited? The cutter is intended for face and shoulder milling where an indexable-insert solution is preferred for economical insert changes and sustained productivity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm End Mill for BLMP 0603 Indexable Inserts 4 Flutes, 150mm L, 25mm Shank - Teknik Makina
Take advantage of the combination of precise 26 mm diameter cutting, compatibility with BLMP 0603 indexable inserts and a rigid 25 mm shank for consistent machining results; order the tool directly via Metav Werkzeuge or consult our technical team for application advice. Shank cutter S481-2TM – 26 mm Ø, 150 mm overall length, for BLMP 0603 indexable inserts by Teknik Makina The Shank cutter S481-2TM is a robust milling solution engineered to accept BLMP 0603 indexable inserts, providing secure insert retention and predictable performance for industrial milling tasks. 26 mm cutter diameter for stable cutting Accepts BLMP 0603 indexable inserts 25 mm shank for secure toolholder fit 150 mm overall length for reach and rigidity Consistent cutting performance with indexable inserts The tool is designed around the economic and operational advantages of indexable inserts. Using BLMP 0603 inserts reduces downtime because inserts can be rotated or replaced quickly, while the cutter body maintains concentricity. With 4 cutting edges, the design balances chip evacuation and material removal rate to sustain process reliability in series production. This translates into steady cycle times and reproducible surface quality when machining common ferrous and non-ferrous components. Rigidity and mounting for accurate machining A stable interface between tool and spindle is essential for dimensional accuracy. The 25 mm shank and 150 mm overall length offer a compromise between reach and stiffness: sufficient projection for recessed features while limiting deflection during heavy cuts. The cutter secures inserts with an M3x6.2 Torx screw, tightened using a T8 Torx key, enabling fast insert changes and secure clamping. The measured mass of the tool contributes to runout stability and helps maintain concentric bore conditions in standard toolholders. Application scope and workshop integration Configured for compatibility with Taegutec indexable inserts, the cutter is suitable for face milling and slotting operations where indexable systems provide economic advantages over solid tools. The tool’s dimensions and build make it a practical choice for machine shops seeking predictable tool life and simplified reconditioning routines. For inventory planning and retrofitting into existing tool sets, the S481-2TM is identifiable by its SKU and straightforward replacement procedure for consumable inserts. For tailored advice on integrating the Teknik Makina S481-2TM into current processes or for ordering through Metav Werkzeuge, please contact our consultants at Metav Werkzeuge for precise application support and supply assurance Technical data SKU: S481-2TM Product type: Shank cutter Designation: Shank cutter for BLMP 0603 indexable inserts Core data Diameter: 26 mm Overall length: 150 mm Shank diameter: 25 mm Cutting edges: 4 Shank cutting length: 30 mm Weight: 0.558 kg ECLASS: 21180806 Special features Compatible inserts: BLMP 0603 Suitable insert manufacturer: Taegutec Torx key: T8 Torx screw: M3x6.2 Manufacturer: Teknik Makina FAQ What inserts fit this shank cutter? The cutter accepts BLMP 0603 indexable inserts; Taegutec inserts are specified as suitable for reliable clamping and performance. What are the main dimensions to check for toolholder compatibility? Key dimensions are 26 mm cutter diameter and a 25 mm shank diameter with 150 mm overall length; these determine suitability for standard holders. How are the inserts secured and changed? Inserts are fixed with an M3x6.2 Torx screw, using a T8 Torx key for safe and quick insert replacement. Is this cutter suitable for high-production environments? Yes; the combination of indexable inserts and 4 cutting edges supports fast insert changes and steady production cycles, making it appropriate for series manufacturing. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
26mm End Mill For BLMP 0603 Indexable Inserts With Internal Coolant, 150mm Overall Length - Teknik Makina
Combines robust indexable cutting performance with internal coolant and a compact 25 mm shank for secure clamping; order the S481-3TM directly via Metav Werkzeuge or consult the technical advisors for application-specific support. 26 mm milling cutter S481-3TM – indexable cutter body for BLMP 0603 with internal coolant (Teknik Cutting Tools) The 26 mm milling cutter S481-3TM is a precision indexable cutter body for BLMP 0603 inserts, designed for stable peripheral milling and efficient chip evacuation in industrial machining environments. Internal coolant for optimised chip evacuation Compatible with BLMP 0603 inserts (Taegutec) 26 mm diameter with 25 mm shank Robust 150 mm overall length Stable geometry for precise, repeatable milling The cutter body features a 26 mm diameter and a 25 mm shank, combined with a short cutting projection to reduce vibration and runout. This geometry provides consistent surface finish and dimensional accuracy in batch production or single-part machining. The arrangement of four cutting edges balances material removal rate and cutting forces, allowing reliable peripheral milling where repeatability is critical. Clear specifications enable straightforward planning of cutting parameters and machine setup. Internal coolant and secure insert clamping extend tool life The built-in internal coolant channel delivers coolant directly to the cutting zone, improving chip control and reducing thermal load on the insert and cutter body. Better cooling permits higher cutting speeds and longer insert life, which lowers downtime and tooling cost per component. Insert retention uses a Torx fastener system (T8 key, M3x6.2 screw) for torsion-resistant clamping, enabling fast, repeatable insert changes with minimal setup time. Compatibility that simplifies workshop logistics Designed for BLMP 0603 indexable inserts and compatible with inserts from Taegutec, this cutter body integrates easily into existing tooling families. The 150 mm overall length and 30 mm cutting length suit a wide range of end milling and shoulder milling tasks without overextending the tool projection. The compact, balanced design reduces load on the spindle and supports predictable cycle times, making it a practical choice for production shops seeking dependable indexable tooling that fits standard toolholders. Contact Metav Werkzeuge for tailored technical advice and efficient supply from Emmerich — we provide application support and fast delivery for Teknik Cutting Tools products such as the S481-3TM Technical data Article number: S481-3TM Label: 26mm Schaftfräser BLMP 0603 L150mm mit Innenkühlung Manufacturer: Teknik Makina UID: S481-3TM Core technical data Cutter diameter: 26 mm Shank diameter: 25 mm Overall length: 150 mm Cutting length (shank): 30 mm Number of cutting edges: 4 Weight: 0.558 kg Special features Internal coolant: yes Compatible inserts: BLMP 0603 Compatible insert manufacturer: Taegutec Torx key: T8 Torx screw: M3x6.2 Product type: milling cutter (indexable inserts) FAQ Which indexable inserts fit this cutter? The cutter accepts BLMP 0603 indexable inserts; inserts from Taegutec are listed as compatible for the S481-3TM. Does the cutter provide internal coolant supply? Yes, the S481-3TM is equipped with internal coolant channels to direct coolant to the cutting zone and improve chip evacuation. What are the shank and cutter diameters? The tool has a 25 mm shank and a 26 mm cutter diameter, providing a compact yet rigid connection for standard toolholders. How many cutting edges does the cutter use? The cutter body is designed for four cutting edges, optimising balance between material removal rate and surface quality. Which fastening hardware is required for inserts? Insert clamping uses a Torx T8 key with an M3x6.2 screw for secure, repeatable retention. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
26mm End Mill for LNMU 0303 Indexable Inserts 4 Flutes, 200mm Overall Length - Teknik Makina
Take advantage of stable clamping with a 25 mm shank, the versatility of LNMU 0303 indexable inserts, and the efficient material removal delivered by four cutting edges for a reliable milling cycle — order the cutter directly via Metav Werkzeuge or consult their specialists for application support. Shank milling cutter S688TM by Teknik Makina – 26 mm diameter, for LNMU 0303 indexable inserts The Shank milling cutter S688TM is a tool designed for precision and productivity in milling operations with LNMU 0303 indexable inserts, suitable for both finishing and medium roughing tasks 26 mm cutter diameter for stable engagement Compatible with LNMU 0303 indexable inserts 25 mm shank for robust clamping 200 mm overall length for deep reach Increased throughput with fewer tool changes The S688TM is engineered for a high material removal rate through its configuration of four cutting edges and a substantial 26 mm diameter. Using standard LNMU 0303 indexable inserts, the tool enables repeatable cutting performance while minimising downtime associated with regrinds. Indexable inserts allow rapid replacement of cutting edges without removing the holder from the spindle, which translates into measurable time savings on the shop floor. For operations seeking a balance between cost efficiency and cycle time, this cutter supports sustained production runs with consistent surface quality. Secure clamping and reach for confident machining A 25 mm shank provides the stiffness required for reliable clamping in standard toolholders, reducing vibration and improving dimensional stability. With a 200 mm overall length and 60 mm cutting length, the design suits components that require deeper pocketing or extended reach while keeping deflection low when used within recommended parameters. The combination of a rigid shank and defined cutting length keeps tolerances achievable in repetitive milling tasks, helping to protect workpiece integrity and reduce scrap rates. Simple insert retention and workshop serviceability Insert change and fastening are straightforward: the cutter uses Torx fixing with a T8 key and M2.5x7 Torx screws, ensuring quick and secure fastening of each insert. Compatibility with inserts from established manufacturers such as Tungaloy guarantees easy access to consumables across supply chains. Clear mechanical fastening reduces risk of incorrect assembly and supports predictable tool life. If further specification or matching of insert grades is required for particular materials, Metav Werkzeuge’s advisors can assist with grade selection to align performance with the application. Contact Metav Werkzeuge for a tailored recommendation on the S688TM and assistance with tooling combinations and supply logistics Technical data Article number: S688TM SKU: S688TM Manufacturer: Teknik Makina Facts Diameter: 26 mm Shank diameter: 25 mm Overall length: 200 mm Cutting length: 60 mm Number of cutting edges: 4 Weight: 0.814 kg Special features Compatible with LNMU 0303 indexable inserts Compatible insert manufacturer: Tungaloy Torx key: T8 Torx screw: M2.5x7 Product type: Shank milling cutter Label: 26mm Schaftfräser LNMU 0303 L200mm FAQ What inserts fit this shank milling cutter? The cutter is designed for LNMU 0303 indexable inserts, enabling use of commonly stocked insert geometries for a range of finishing and medium-roughing tasks. Which insert manufacturers are compatible? The S688TM is specified for compatibility with inserts from Tungaloy, though equivalent LNMU 0303-format inserts from other manufacturers may also be used where geometries match. How is an insert fastened to the cutter? Each insert is secured with a Torx screw (type M2.5x7) tightened using a T8 Torx key, providing positive retention and straightforward replacement. For which machining tasks is this cutter best suited? This shank milling cutter is suitable for operations requiring stable engagement and reach, such as pocketing, face milling and shoulder milling where a 60 mm cutting length and 200 mm overall reach are advantageous. How does the shank size affect performance? The 25 mm shank offers robust clamping for reduced runout and vibration, improving dimensional accuracy and extending insert life under steady cutting conditions. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm End Mill for Taegutec 3PKT 1004 inserts - Teknik Makina
Characteristics: Order Number: S486TM Item: End Mill usable with 3PKT 1004 Indexable Inserts the Hersteller's Taegutec Brand: Teknik Makina Numerical Representations: Diameter: 26mm Cutting Edges: 2 Weight: 0.773kg Total length: 200mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
26mm End Mill for Walter ADMT 1606 inserts - Teknik Makina
Technical Data: Item: End Mill Brand: Teknik Makina Order Number: S463TM usable with ADMT 1606 Indexable Inserts of Walter Diameter: 26mm Angle: 90° Total length: 150mm Cutting Edges: 2 Weight: 0.545kg Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
26mm End Mill for WNMX 0603 Indexable Inserts With Internal Coolant, 150mm Length - Teknik Makina
Combining a compact 26 mm cutting head with internal coolant and compatibility for WNMX 0603 indexable inserts provides efficient chip control and reduced cycle times; order the tool directly via Metav Werkzeuge or consult the advisers for application-specific guidance. Shank cutter for WNMX 0603 indexable inserts — 26 mm, internal coolant (Teknik Makina) Shank cutter for WNMX 0603 indexable inserts designed for robust indexable milling tasks on industrial CNC machinery, offering stable clamping and effective coolant routing for consistent metal removal. 26 mm diameter for compact toolpaths Internal coolant for improved chip evacuation Compatible with WNMX 0603 indexable inserts Solid 25 mm shank for stable clamping High material removal rates with reliable coolant control The combination of a 26 mm cutting head and internal coolant enables sustained cutting performance during demanding machining cycles. With 4 flutes, the cutter balances material removal rate and surface finish: the multiple cutting edges distribute cutting forces and reduce load per edge, which improves tool life and dimensional stability. Internal coolant channels supply the cutting zone directly, enhancing chip evacuation and heat dissipation; this reduces thermal growth in the tool assembly and helps maintain consistent tolerances during longer runs. For production environments where cycle time and repeatability matter, the tool’s geometry is optimised to keep machining efficient without sacrificing control. Stability and repeatability for precision milling A 25 mm shank delivers secure clamping and minimises deflection in shoulder milling and slotting operations. The tool accepts WNMX 0603 indexable inserts, a common insert system that allows rapid reconditioning: worn inserts are exchanged in seconds, avoiding full-tool replacement and reducing downtime. Compatibility with established insert geometries from Korloy ensures a broad selection of grades and edge preparations for different workpiece materials. Together, the shank diameter and insert system provide a stable platform for repeatable results in batch production and fixture-based workflows. Service-friendly assembly and predictable maintenance Assembly and insert replacement are straightforward: the cutter uses a T8 torx key and an M2.5x6.5 fastening screw, enabling quick, tool-room maintenance without specialised equipment. The straightforward screw and key combination simplifies insert indexing and reduces the time needed for set-up changes. Because the coolant is delivered internally, the system requires normal inspection of coolant paths and proper sealing at the holder interface; routine checks maintain performance and prevent pressure loss. Clear mechanical interfaces mean predictable maintenance intervals and easy documentation for quality control. Versatile use in industrial milling applications Engineered for indexable milling tasks, this shank cutter suits peripheral milling, face milling, shoulder work and light to moderate slotting where an indexable cutter is preferable to solid tools. The tool’s construction supports machining strategies that prioritise fast insert changes and consistent edge geometry. It is especially useful where replacement inserts from established manufacturers are preferred for cost-effective tool management. The cutter is suitable for integration into standard collet or chuck systems that accept a 25 mm shank, providing flexibility across a range of machine setups. For application advice or to secure the Teknik Makina S906-1TM for immediate delivery, contact Metav Werkzeuge; technical enquiries are welcome via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: S906-1TM Label: 26 mm shank cutter for WNMX 0603, L150 mm, internal coolant Product type: Shank cutter eClass: 21180806 Facts Diameter: 26 mm Overall length: 150 mm Weight: 0.582 kg Shank diameter: 25 mm Cutting length (flute length): 60 mm Number of cutting edges: 4 Special features Internal coolant Compatible with WNMX 0603 indexable inserts Fitting inserts manufacturer: Korloy Torx key: T8 Torx screw: M2.5x6.5 Manufacturer: Teknik Makina FAQ What insert type does this cutter accept? The cutter accepts WNMX 0603 indexable inserts; the S906-1TM is configured specifically for this insert family and works with Korloy grades. Is the tool suitable for automated production lines? Yes, the shank cutter S906-1TM, with its internal coolant and robust 25 mm shank, is designed for stable, repeatable performance in automated CNC environments. Which key and screw are required for insert changes? Insert retention uses a T8 torx key and an M2.5x6.5 screw; this facilitates quick and standardised insert replacement on the S906-1TM. Can this cutter be used for slotting and shoulder milling? The indexable shank cutter is suitable for peripheral milling, shoulder operations and light slotting where insert-based tooling provides efficiency and rapid changeover. How does internal coolant improve machining with this tool? Internal coolant directs cutting fluid to the cutting zone, improving chip evacuation and heat control; this enhances tool life and machining stability for the S906-1TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
26mm End Mill for WNMX 09T3 Indexable Inserts Internal Coolant, 25mm Shank - Teknik Makina
Take advantage of a rigid 25 mm shank, internal coolant and a compact 26 mm cutting diameter for consistent, high-feed milling. The combination of secure clamping, replaceable WNMX 09T3 inserts and a 140 mm overall length keeps production moving with low downtime — order via Metav Werkzeuge or contact our consultants for configuration advice. Indexable insert milling cutter for WNMX 09T3 — 26 mm, internal coolant (Teknik Makina) Indexable insert milling cutter for WNMX 09T3 designed as a modular cutter body for industrial milling applications where fast insert changes and coolant-assisted chip control are required 26 mm cutting diameter Internal coolant supply 25 mm shank for secure clamping Compatible with Korloy WNMX 09T3 inserts Consistent chip control and longer tool life through coolant delivery The body integrates a dedicated internal coolant channel that directs cutting fluid directly to the cutting zone, improving chip evacuation and reducing thermal load on the insert. This targeted coolant supply helps maintain cutting-edge integrity under continuous operation, resulting in extended service intervals and fewer unplanned tool changes. With a compact 26 mm diameter and robust construction, the cutter ensures repeatable results when paired with a suitable holder and coolant system, supporting higher process stability across shifts. Rigid shank and secure fastening for accurate machining A 25 mm shank diameter and a total length of 140 mm overall length provide a stable connection to the machine spindle, reducing vibration and runout during heavy engagement cuts. The 60 mm cutting length accommodates deep axial cuts while the tool’s fastening system uses M3x7 Torx screws (Torx key T8) for reliable insert clamping. The combination of precise shank dimensions and proven screw standards simplifies workshop logistics and minimises set-up time, enabling more consistent tolerances on serial parts. Flexible indexable system for fast changeover and process control Built to accept WNMX 09T3 indexable inserts from Korloy, the milling body makes replacement straightforward: worn edges are swapped in seconds, restoring cutting performance without regrinding. This modular approach reduces per-part tooling costs compared with solid tools and supports varying grades and geometries for different process steps. The design with two cutting edges per pocket enables balanced cutting forces and predictable engagement behaviour, making the tool suitable for a range of milling strategies where throughput and repeatability are priorities. Integration into production and reduced maintenance overhead As a production-oriented tool, the cutter body simplifies inventory management: a single holder accepts standard WNMX 09T3 inserts, while the internal coolant and standardised screw sizes streamline maintenance. The modest weight and dimensional footprint assist handling and changeover in busy production cells. Combined with the backing of Teknik Makina’s manufacturing and Metav’s distribution, the setup delivers practical benefits — fewer machine stoppages, faster insert swaps and clearer reordering processes for procurement teams. For supply, configuration support and fast delivery of Teknik Makina indexable insert milling cutters, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to confirm the exact holder and insert combination for the application. Technical data Article number: S803-1TM Product type: Indexable insert milling cutter Manufacturer: Teknik Makina Internal coolant: Yes Compatible insert type: WNMX 09T3 Compatible insert manufacturer: Korloy Measurements Cutting diameter: 26 mm Overall length: 140 mm Shank diameter: 25 mm Cutting length: 60 mm Weight: 0.477 kg Cutting edges: 2 Features & compatibility Internal coolant channel Compatible with WNMX 09T3 indexable inserts Compatible insert manufacturer Korloy Torx screw M3x7 Torx key T8 SKU: S803-1TM FAQ Which insert type does this milling cutter accept? The cutter accepts WNMX 09T3 indexable inserts; the body is compatible with Korloy inserts and identified as SKU S803-1TM. Is there internal coolant and how is it supplied? Yes, the milling cutter features internal coolant channels that deliver fluid directly to the cutting edge to aid chip evacuation and reduce cutting temperatures. What are the key dimensions for clamping and setup? The tool has a 25 mm shank diameter, 26 mm cutting diameter, 60 mm cutting length and 140 mm overall length, which should be matched to an appropriately rated tool holder. Which screw and key are required for insert fixation? Insert fixation uses M3x7 Torx screws tightened with a T8 Torx key, allowing secure and standardised insert clamping. What benefits does the indexable system provide to production? The indexable system enables rapid insert changes, predictable cutting behaviour with two cutting edges, and lower per-part tooling costs compared with regrindable solid cutters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Shank Cutter for 4NKT 0603 Indexable Inserts 25mm Shank, 30mm Cutting Length, 3 Flutes, 200mm Overall Length - Teknik Makina
Take advantage of the combination of robust shank design and precise insert compatibility for reliable medium‑duty milling; the secure clamping and quick insert changes support steady production flow. Order the tool directly via Metav Werkzeuge or consult the technical team for application-specific advice. S476TM Shank milling cutter by Teknik Makina — for 4NKT 0603 indexable inserts, Ø26 mm, 3‑edge The S476TM is a shank milling cutter engineered for indexable 4NKT 0603 inserts, intended for medium‑duty face and shoulder milling where repeatable chip formation and tool life matter Shank Ø25 mm for stable clamping Cutting diameter Ø26 mm for versatile milling Three cutting edges for balanced cutting action Compatible with Taegutec 4NKT06 inserts Higher metal removal rates with consistent chip control The milling body is designed to deliver a steady cut profile thanks to its three cutting edges, which balance radial loads and reduce vibration during operation. With a cutting diameter of Ø26 mm and an effective 30 mm cutting length, the geometry supports efficient material removal and predictable chip flow. This results in shorter cycle times and fewer rework passes, helping to increase throughput on medium‑sized components while preserving surface integrity. Secure clamping and fast insert changes for uptime A Ø25 mm shank provides secure clamping in standard toolholders, while the insert interface is optimised for fast exchange. The cutter uses standard indexable 4NKT06 inserts and is compatible with Taegutec grades, allowing rapid replacement without regrinding. The clamping is secured by an M3x6.5 Torx screw (Torx key T8), simplifying maintenance and reducing downtime during routine changeovers. Built for workshop reliability and straightforward service With an overall length of 200 mm and a balanced design (tool weight 0.815 kg), the body offers reliable handling in milling spindles and reduces stress on bearings compared with heavier assemblies. The modular approach — an insert‑based cutting system rather than a monolithic tool — lowers lifetime costs: worn cutting edges are replaced individually, which can be more economical in regular production environments. Practical compatibility and procurement advantages The cutter body matches the established 4NKT 0603 insert system, giving shops access to a wide choice of grades and coatings from established suppliers. Integration into an existing fleet is straightforward where Taegutec or equivalent inserts are already used. Metav Werkzeuge’s European distribution and technical support ensure dependable supply and application advice from Emmerich, reinforcing predictable lead times and consistent product availability. For purchase or technical consultation on Teknik Makina’s S476TM shank milling cutter, contact Metav Werkzeuge for procurement assistance and machining recommendations: info@metav-werkzeuge.com | +49 2822 7131930 — Metav’s team will advise on insert grades and clamping options to match production needs Technical data Article number: S476TM Designation: Shank milling cutter for 4NKT 0603 indexable inserts Brand: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Cutting diameter: Ø26 mm Shank diameter: Ø25 mm Cutting length: 30 mm Number of cutting edges: 3 Overall length: 200 mm Weight: 0.815 kg Special features Compatible inserts: 4NKT06 Compatible insert manufacturer: Taegutec Fixing screw: M3x6.5 Torx Torx key size: T8 Intended for medium‑duty milling with indexable inserts FAQ What insert type fits this milling body? The S476TM is designed for 4NKT06 indexable inserts; choose the grade suited to the workpiece material. Which screw and key are required to secure the inserts? Inserts are retained with an M3x6.5 Torx screw using a T8 Torx key. What shank diameter is required for the toolholder? The cutter has a Ø25 mm shank and requires a matching holder for secure clamping. How many cutting edges does the cutter provide and what is the benefit? The body provides three cutting edges, offering balanced cutting forces and improved vibration damping for consistent finishes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Shank Cutter for ADMT 1606 Indexable Inserts 90° Cutting Angle, 25mm Shank Diameter - Teknik Makina
Take advantage of a compact, indexable-insert milling solution that combines high retention reliability and straightforward maintenance for continuous production. The combination of a 25 mm shank, 26 mm cutter diameter and a secure Torx fixing provides repeatable seating for ADMT 1606 inserts; order directly via Metav Werkzeuge or consult the technical team for application advice. Shank cutter S464TM — indexable insert milling body, 26 mm dia, 25 mm shank (Teknik Makina) Shank cutter S464TM designed for light-to-medium shoulder milling using ADMT 1606 indexable inserts, suitable where secure clamping and consistent geometry are required 26 mm cutter diameter for standard shoulder milling 25 mm shank for robust toolholding Compatible with ADMT 1606 indexable inserts Torx M4x10 screw (T15) for secure clamping Faster, more predictable machining through stable geometry The machining body is engineered to deliver repeatable cuts with minimal set-up variation. With a 26 mm diameter and two cutting edges, the tool reduces cycle-time variations and supports consistent step-over patterns. The solid 25 mm shank ensures secure seating in standard toolholders, reducing runout and vibration so that surface finish and dimensional stability improve across serial runs. This translates into measurable productivity gains and fewer unplanned tool changes. Secure clamping and simple serviceability cut downtime A single Torx fastener design—M4x10, tightened with a T15 key—simplifies insert changes and torque control. The optimised fixing keeps ADMT 1606 inserts locked precisely in position, lowering the risk of insert movement under load. Maintenance routines therefore become quicker and safer: insert exchange and reassembly are straightforward, which helps to keep machine uptime high and maintenance windows short. Clear application range and material guidance The cutter is specified for ADMT 1606 indexable inserts and is listed as compatible with Walter-type inserts, making tool selection easier when matching insert grades and geometries. The 60 mm cutting length and 200 mm overall length offer a balance between reach and rigidity for common shoulder and face-milling tasks. For those planning process parameters, the tool is suited to conventional and climb milling in typical steels and alloyed materials when paired with the correct insert grade and cutting data. Contact Metav Werkzeuge for tailored process advice and to arrange a precise supply from Emmerich—technical consultants are available to discuss insert grades, clamping best practice and toolholder pairing Technical data SKU: S464TM Manufacturer: Teknik Makina Product type: Shank cutter for ADMT 1606 indexable inserts Torx screw: M4x10 (T15) Compatible insert type: ADMT 1606 Compatible insert manufacturer: Walter Weight: 0.751 kg Core data Cutter diameter: 26 mm Shank diameter: 25 mm Cutting length (shank section): 60 mm Overall length: 200 mm Number of cutting edges: 2 Cutting angle: 90° Special features Indexable insert system: ADMT 1606 Fastening: Torx screw M4x10, key T15 Designed for shoulder and face milling Manufacturer SKU: S464TM FAQ Which insert type is required for this cutter? The cutter accepts ADMT 1606 indexable inserts; compatible Walter-type inserts are suitable when matching geometry and grade. What is the shank diameter and why does it matter? The shank diameter is 25 mm, providing the rigidity required for stable toolholding and reduced runout in standard holders. How long is the cutting length and what reach does that provide? The effective cutting length on the shank section is 60 mm, while the overall tool length is 200 mm, offering a practical balance of reach and stiffness for common operations. How many cutting edges does the tool have? The tool features two cutting edges, which supports efficient material removal with straightforward chip control. Which fastener is used for insert clamping and what key is required? Insert clamping uses a Torx M4x10 screw and requires a T15 Torx key for secure tightening and easy servicing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Shank Cutter For WNMX 0603 Indexable Inserts 4 Flutes 60mm Cutting Length, 150mm Overall Length - Teknik Makina
Benefit from increased rigidity and consistent material removal with a robust 25 mm shank and a 26 mm cutting diameter, while retaining flexibility through compatibility with WNMX 0603 indexable inserts; order the S906TM via Metav Werkzeuge or contact our consultants for application advice. S906TM indexable insert milling cutter — 26 mm diameter, compatible with WNMX 0603 inserts (Teknik Cutting Tools) S906TM indexable insert milling cutter for high-efficiency shoulder and slot milling with WNMX 0603 indexable inserts — designed for stable cutting and straightforward clamping. Indexable cutter for WNMX 0603 inserts 26 mm cutting diameter, 90° cutting angle 25 mm shank with 60 mm cutting length Secured by M2.5x5.5 Torx screw, T8 key Reliable rigidity for consistent material removal This indexable insert cutter is engineered to deliver stable performance through a 25 mm shank and a substantial overall length of 150 mm, which together minimise vibration during milling. The 26 mm cutting diameter provides predictable chip load per tooth and, combined with the four cutting edges, enables steady stock removal in interrupted cuts. Because the tool is designed for WNMX 0603 inserts, tool changeover is fast and repeatable, reducing non-productive time and improving process consistency for both batch and single-piece production. Secure clamping and insert compatibility for shop-floor efficiency Clamping is accomplished with a precision Torx fastener (M2.5x5.5) tightened with a T8 key, ensuring reliable seat and repeatability of the insert position. The cutter accepts Korloy and equivalent WNMX 0603 indexable inserts, allowing compatibility with widely available grades for roughing and finishing. The 90° cutting angle supports shoulder milling and square-shoulder features with minimal set-up complexity, making the tool suitable for general machining tasks where fast insert replacement and dependable seating are priorities. Practical integration and supply assurance for production workflows With a design focused on industrial applicability, the tool’s four cutting edges balance cutting economy and tool life: more edges yield more index positions per insert, lowering tooling cost per part. The listed mass of 0.582 kg and the 60 mm cutting length are suitable for a wide range of milling setups while maintaining toolholder stability. Procurement and supply are supported through Metav’s European distribution, providing straightforward replacement orders and consistent availability to reduce lead-time risks for workshops and industrial buyers. Contact Metav Werkzeuge to confirm the Teknik Cutting Tools S906TM for the intended machining tasks and secure prompt delivery from Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: S906TM Manufacturer: Teknik Makina Type: Indexable insert milling cutter for WNMX 0603 inserts Compatible insert form: WNMX 0603 Suitable insert supplier: Korloy Facts Cutting diameter: 26 mm Shank diameter: 25 mm Cutting length: 60 mm Overall length: 150 mm Number of cutting edges: 4 Cutting angle: 90° Weight: 0.582 kg Torx screw: M2.5x5.5 Torx key size: T8 Special features Indexable insert system for fast replaceability Designed for shoulder and slot milling Robust shank for improved rigidity Compatible with Korloy WNMX 0603 inserts FAQ Which inserts fit this cutter? The S906TM indexable insert milling cutter accepts WNMX 0603 inserts; Korloy WNMX 0603 grades are specifically compatible and commonly used with this tool. What is the shank diameter and why does it matter? The shank diameter is 25 mm, which increases rigidity in the toolholder and helps reduce vibration for more consistent surface finish and longer insert life. How many cutting edges are available per cutter? This cutter is equipped with 4 cutting edges, allowing multiple index positions per insert to extend effective tool life and reduce tooling cost per part. Is the clamping hardware standardised? Clamping is via a Torx screw M2.5x5.5 tightened with a T8 key, providing a repeatable and secure seat for the insert. For which machining operations is the tool best suited? With a 90° cutting angle and a 26 mm diameter, the tool is suitable for shoulder milling, slotting and general face-milling tasks where indexable inserts are preferred for rapid changeovers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Shank Cutter for XNKT 0604 Indexable Inserts With Internal Coolant, 150mm - Teknik Makina
Take advantage of a robust combination of internal coolant, stable clamping and precise dimensions to keep milling processes reliable and efficient; order the shank milling cutter directly via Metav Werkzeuge or consult the technical team for application advice. Shank milling cutter S840-1TM — 26 mm cutter with internal coolant for XNKT 0604 indexable inserts (Teknik Makina) Shank milling cutter S840-1TM designed for secure insert mounting and continuous production use with XNKT 0604 indexable inserts, featuring internal coolant for improved tool life and chip evacuation 26 mm cutting diameter, robust design Internal coolant for improved chip control 25 mm precision shank for stable clamping Compatible with Korloy XNKT 0604 inserts Engineered for dependable cutting performance The S840-1TM is built around a compact 26 mm cutter diameter and a 25 mm shank, combining rigidity with accessibility in confined set-ups. The tool accepts XNKT 0604 indexable inserts, providing a cost-effective approach to tool life management because inserts can be rotated or replaced without removing the whole cutter. The integrated internal coolant channel directs coolant to the cutting zone, which supports heat dissipation and chip flushing; this reduces edge wear and helps maintain surface quality over longer cycles. The result is a milling solution that prioritises process stability and repeatability. Measurable productivity and reduced downtime Process efficiency is delivered through a simple, serviceable design: three insert seats, secured with M3x7 Torx screws, enable straightforward indexing and re-clamping. The requirement for a T8 Torx key ensures consistent screw torque during maintenance. Stable clamping from the precise shank geometry diminishes vibration and enables higher metal removal rates where insert geometry and machining parameters allow. For production planners, that translates into fewer stoppages and predictable cycle times, supporting throughput targets without complex set-up procedures. Practical handling, compatibility and workshop benefits With an overall length of 150 mm and a cutting-head length of 40 mm, the tool balances reach and stiffness for many milling tasks. The assembly weight of 0.572 kg aids in predictable tool-change handling. Compatibility with Korloy XNKT 0604 inserts simplifies procurement and inventory management when these inserts are standard in the shop. Replacement procedures focus on regular inspection of screw torque and insert seat cleanliness to preserve repeatable positioning; keeping the internal coolant channel free of swarf supports consistent performance. For bespoke application advice or material-specific recommendations, technical consultation is available. Contact Metav Werkzeuge today to discuss specification, verify suitability for intended applications and ensure reliable supply from Emmerich — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: S840-1TM ECLASS: 21180806 Manufacturer: Teknik Makina Facts Diameter: 26 mm Overall length: 150 mm Shank diameter: 25 mm Cutting head length: 40 mm Weight: 0.572 kg Number of cutting seats: 3 Special features Internal coolant channel Compatible with XNKT 0604 indexable inserts Torx screw M3x7 for insert fastening Torx key required: T8 FAQ What insert type fits this shank milling cutter? The cutter is designed for XNKT 0604 indexable inserts; Korloy XNKT 0604 inserts are explicitly compatible with this tool. How is coolant delivered to the cutting zone? Internal coolant is supplied through a built-in channel that directs fluid to the insert seats, improving chip evacuation and edge life for the S840-1TM. Which fastening hardware secures the inserts? Inserts are secured with M3x7 Torx screws; a T8 Torx key is used for tightening and removal. What are the key dimensions for setting up the tool in a holder? Key dimensions: 26 mm diameter, 25 mm shank diameter, 150 mm overall length and 40 mm cutting-head length. Is the tool suitable for quick insert changes during production? Yes; the indexable design with three insert seats and Torx screws enables rapid insert indexing and replacement to minimise downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Shank End Mill for ENMX 0604 Indexable Inserts, 150mm Overall Length, 4 Flutes - Teknik Makina
Benefit from a combination of 25 mm shank rigidity, 26 mm cutter diameter and compatibility with ENMX 0604 indexable inserts for steady, repeatable milling results; order the Schaftfräser S113TM directly via Metav Werkzeuge or consult our technical advisers for application support Schaftfräser S113TM – indexable insert milling cutter with 26 mm diameter and 25 mm shank (Teknik Makina) Schaftfräser S113TM is a compact indexable milling cutter designed for efficient, repeatable material removal in industrial milling applications with ENMX 0604 inserts 25 mm shank for stable clamping Compatible with ENMX 0604 indexable inserts 26 mm cutter diameter for versatile milling Torx M2.5x7 screw; T8 key required Higher metal removal rates with indexable inserts The head is configured for ENMX 0604 indexable inserts, enabling fast index changes and consistent cutting geometry. With four cutting edges, the tool reduces downtime for insert rotation and replacement, which directly improves machine uptime. The replaceable-insert design allows costs to be focused on consumables rather than complete tool replacements, delivering an economic advantage for frequent-production environments. The combination of secure insert clamping and stable geometry supports steady chip formation and predictable cutting behaviour, which aids programming and process planning. Rigid clamping and controlled reach for steady cuts A 25 mm shank and 150 mm overall length provide a balance between stiffness and working reach. The compact shank diameter contributes to reduced deflection under load, keeping tolerances tight during slotting and peripheral milling tasks. Changing inserts is straightforward via the Torx M2.5x7 screw (Torx key T8), enabling quick, toolroom-style maintenance without complex fixtures. This configuration supports shops that demand repeatable results across batch runs while keeping setup times low and tool handling intuitive. Practical workshop integration and proven reliability Designed for indexable operations in production and maintenance settings, this cutter accepts inserts from established partners such as YG-1, ensuring easy sourcing of compatible grades. The tool’s geometry and insert format allow a pragmatic combination of roughing and light finishing with the same holder, simplifying tooling lists and reducing inventory complexity. For users seeking straightforward retrofitting into existing spindle holders or milling arbors, the S113TM’s standard dimensions make integration predictable. Metav’s position as a precision partner guarantees that procurement and supply chain handling are transparent and dependable. For a tailored recommendation or to confirm fitment for a specific milling set-up, contact Metav Werkzeuge — our specialists will advise on suitable inserts and clamping procedures and can supply the S113TM and matching accessories promptly Technical data Article number: S113TM Manufacturer: Teknik Makina Core data Cutter diameter: 26 mm Shank diameter (D): 25 mm Overall length: 150 mm Number of cutting edges: 4 Compatible insert type: ENMX 0604 Compatible insert manufacturer: YG-1 Torx screw: M2.5x7 Torx key: T8 Eclass: 21180806 ETIM: EC011860 Versions & special features Indexable insert milling cutter configuration Replaceable ENMX 0604 inserts Compact shank for rigid clamping Quick insert change via Torx screw FAQ What inserts fit this milling cutter? The S113TM is designed for ENMX 0604 indexable inserts; compatible grades from YG-1 are commonly used for this holder. How many cutting edges does the tool have? This cutter is equipped with four cutting edges, enabling balanced cutting and efficient index changes. What shank size is required for mounting? The tool features a 25 mm shank, suitable for holders and arbors that accept that diameter. Which screw and key are needed to secure the inserts? Insert retention uses a Torx M2.5x7 screw; secure tightening requires a T8 Torx key. Can this cutter be supplied with alternative insert brands? While the S113TM is specified for ENMX 0604 inserts, alternative brands that offer the same insert geometry can be used provided they meet the ENMX 0604 specification Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Shank Milling Cutter for XNEX 0403 Indexable Inserts, 150mm Overall Length, 4 Flutes - Teknik Makina
Benefit from a compact combination of reliable insert compatibility, a 26 mm cutting diameter and a secure 25 mm shank that keeps tool changes efficient and runout low; order the S198TM directly via Metav Werkzeuge or consult our specialists for application-specific advice. S198TM Shank Milling Cutter — for XNEX 0403 indexable inserts, 26 mm cutting diameter (Teknik Makina) A S198TM shank milling cutter engineered for use with XNEX 0403 indexable inserts, delivering stable medium‑duty milling with a 25 mm shank and four cutting edges for consistent material removal. Compatible with XNEX 0403 indexable inserts 26 mm cutting diameter for medium machining 4 cutting edges for stable material removal 25 mm shank for secure toolholder fit Consistent machining performance through proven insert technology The tool combines the advantages of indexable inserts with a compact cutter body so shops gain repeatable results without the need for complex regrinding. By accepting XNEX 0403 inserts, the tool ensures predictable chip formation and straightforward edge replacement; this reduces preparation time and keeps cycle times tight. The configuration with four cutting edges gives a good balance between feed rate capability and surface finish, making the milling tool suitable for common milling tasks where consistent geometry and tool life are required. Secure clamping and simple serviceability to limit downtime A 25 mm shank provides a firm connection to standard toolholders, lowering the risk of micro‑movement under load and helping to maintain tolerances in series production. Insert fastening uses an M2.5x7 Torx clamping screw with a T8 key for rapid, tool‑shop friendly replacement of inserts; the straightforward clamping concept shortens maintenance intervals and keeps the production line turning. The combination of robust clamping and easy access to the screw supports quick changeovers while preserving concentricity and runout control. Compact dimensions for versatile workshop and production use With a 26 mm diameter and 150 mm overall length, the cutter fits a broad range of milling operations in small to medium machining centres and milling heads. The design suits a variety of common materials when combined with appropriate XNEX 0403 inserts from established manufacturers such as SECO, offering a pragmatic tool choice for job shops and in‑house production. The compact geometry helps reduce overhang where precision matters, contributing to improved surface quality and prolonged insert life. For tailored advice on integrating the Teknik Makina S198TM into existing tool sets, contact Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss application details and insert selection. Technical Data Article number: S198TM Manufacturer: Teknik Makina Product: Shank milling cutter for XNEX 0403 indexable inserts Compatible inserts: XNEX 0403 (SECO compatible) Clamping screw: M2,5x7 Torx key: T8 Facts Diameter: 26 mm Overall length: 150 mm Shank diameter: 25 mm Cutting edges: 4 Special features Indexable insert concept for rapid edge change Compact design for reduced overhang Suited for medium machining tasks Robust shank for stable toolholder fit FAQ Which insert type is required for this cutter? The cutter is designed for XNEX 0403 indexable inserts; select inserts compatible with that designation for correct seat fit and cutting geometry. Is the shank diameter suitable for standard holders? Yes, the 25 mm shank matches common toolholders and is intended to provide a secure connection for stable machining. How are the inserts fastened and serviced? Inserts are secured with an M2.5x7 Torx screw; a T8 key is used for quick replacement, allowing efficient servicing on the shop floor. What machining operations suit this cutter? The tool is intended for medium‑duty milling in production and workshop environments where a 26 mm diameter cutter with four cutting edges provides a balance of speed and surface quality. Can this tool be used with SECO inserts? The mounting accepts XNEX 0403 inserts and is compatible with offerings from established suppliers such as SECO, provided the insert form matches the seat. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Solid Carbide End Mill For BLMP 0603 Indexable Inserts 4 Flutes 40mm Cutting Length 200mm Overall Length - Teknik Makina
Combine robust clamping with rapid insert changes to maintain consistent throughput; benefit from the combination of a 26 mm cutting diameter, 4-flute geometry and secure 25 mm shank for steady production. Order the tool directly via Metav Werkzeuge or consult our specialists for integration advice. Shank cutter S482TM – 26 mm diameter, 4‑flute indexable system (Teknik Makina) A shank cutter S482TM engineered for use with BLMP 0603 indexable inserts, delivering stable clamping and efficient chip evacuation in insert-based milling systems 26 mm cutting diameter 4 cutting edges for smooth engagement Compatible with BLMP 0603 indexable inserts 25 mm shank diameter for secure clamping Stable geometry for predictable productivity The tool's 26 mm cutting diameter combined with a 4-flute configuration provides a balance between metal removal rate and surface finish. The 25 mm shank reduces run-out and vibration when mounted in rigid holders, which directly improves dimensional consistency on series parts. Because the cutter accepts BLMP 0603 indexable inserts, tool life management becomes a matter of exchanging inserts rather than replacing the whole tool body, simplifying inventory and lowering per-part tooling cost. The clear correspondence between cutter geometry and insert form ensures repeatable results in batch production. Quick maintenance and repeatable set‑ups reduce downtime Fast insert changes are supported by the supplied Torx fixings: a M3x6.5 screw tightened with a T8 key secures each insert securely while allowing rapid replacement. The tool offers a 40 mm cutting length and a 200 mm overall length, dimensions that suit a range of holder setups without compromising rigidity. At 0.771 kg, the tool balances mass for stability with manageable handling during changeover. These characteristics make the cutter an economical choice where uptime and reproducibility are primary concerns, enabling shorter set-up intervals and reliable tolerance adherence. Flexible integration for insert-based workflows Designed around the established indexable concept, this cutter works with inserts from Taegutec and supports grading strategies that match cutting conditions to workpiece demands. The modular approach allows machining strategies to be adapted — from high-feed passes to finishing — by selecting appropriate insert grades and geometries. Combined with Metav’s emphasis on dependable supply and technical competence, the system supports streamlined procurement and consistent quality on the shopfloor. The result is a pragmatic tool solution that aligns with industrial production requirements while keeping toolstock manageable. For application-specific advice or to arrange supply of the TekniK Cutting Tools shank cutter S482TM from Metav Werkzeuge, contact our consultants in Emmerich for rapid technical guidance and consistent delivery Technical Data SKU: S482TM Manufacturer: Teknik Makina Article designation: Shank cutter for BLMP 0603 indexable inserts Compatible insert type: BLMP 0603 Compatible insert manufacturer: Taegutec Torx screw: M3x6.5 Torx key size: T8 eClass: 21180806 ETIM: EC011860 Core specifications Cutting diameter: 26 mm Shank diameter: 25 mm Number of cutting edges: 4 Cutting length: 40 mm Overall length: 200 mm Weight: 0.771 kg Design features Indexable insert concept Secure Torx fastening system Files / drawings available (file IDs: 62de7e510f56dbb4de4dbf06, 62de7ee633927e49dbf3278f) Solid shank construction for stable clamping FAQ Which insert type fits this cutter? The cutter accepts BLMP 0603 indexable inserts; it is designed to be used with inserts from Taegutec in the specified seat form. What are the key dimensions of the tool? Key dimensions are: 26 mm cutting diameter, 40 mm cutting length and 200 mm overall length; the shank diameter is 25 mm. How is an insert secured in the cutter? Inserts are secured with a M3x6.5 Torx screw; the matching drive size is T8, enabling straightforward and repeatable clamping. Is the design suitable for series production? Yes. The indexable insert system and 4-flute geometry offer efficient chip removal and consistent engagement, supporting repeatable machining in medium- to high-volume runs. Which manufacturer produces the tool and who is responsible for supply in Europe? The tool is produced by Teknik Cutting Tools; supply and responsibility for distribution in Europe are handled by Metav Werkzeuge GmbH Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Solid Carbide End Mill For LNMU 0303 Indexable Inserts 4 Flutes, 150mm Length - Teknik Makina
Take advantage of the tool's combination of a 26 mm diameter, four cutting edges and a 25 mm shank for dependable rigidity and predictable cycle times; order via Metav Werkzeuge or consult our specialists for application advice. End mill S686TM for LNMU 0303 indexable inserts — 26 mm, 4 flutes (Teknik Makina) A robust End mill S686TM engineered to accept LNMU 0303 indexable inserts for precision milling in workshop and small-series production environments 26 mm diameter for stable cutting Four cutting edges for smooth removal 25 mm shank for rigid toolholding Compatible with LNMU 0303 inserts Consistent material removal for predictable cycles The End mill S686TM combines a 26 mm diameter with four cutting edges to deliver balanced chip formation and reduced vibration. The tool’s geometry promotes repeatable chip evacuation, while the 60 mm cutting length and 150 mm overall length give the necessary reach without excessive overhang. In practice this translates into shorter cycle times and fewer surface defects, so production planners achieve more reliable throughput and reduced rework. Secure clamping and dependable rigidity A 25 mm shank provides a compact, stiff interface with standard holders or collets, improving axial and radial stability during milling. The insert is secured with a T8 Torx key and M2.5x7 screw, enabling repeatable clamping torque and straightforward maintenance routines. These fastening features help to minimise chatter, support consistent dimensional accuracy and extend effective tool life across continuous runs. Fast indexable-insert handling to reduce downtime Designed specifically for LNMU 0303 indexable inserts, the cutter allows rapid insert changes with minimal tooling, supporting lean maintenance practices. Using standardised inserts from suppliers such as Tungaloy simplifies spare parts logistics and makes tooling more predictable across machines. Faster insert swaps reduce inactive time on the machine and keep production schedules more consistent. Suitable for workshop and small-series production The end mill’s balanced flute design and compact dimensions suit both bench workshops and small-series production where stability and repeatability matter. The combination of multiple cutting edges and a rigid shank supports stable feed rates and predictable tool behaviour, aiding process planning. The tool weight of 0.612 kg contributes to a known dynamic response in common toolholders, helping operators to fine-tune feeds and speeds. Contact Metav Werkzeuge for tailored technical advice or to request availability of the Teknik Makina end mill S686TM from our Emmerich stock Technical data Article number: S686TM Manufacturer: Teknik Makina Compatible inserts: LNMU 0303 Core dimensions Diameter: 26 mm Overall length: 150 mm Shank diameter: 25 mm Cutting length: 60 mm Number of cutting edges: 4 Weight: 0.612 kg Features & fastening Insert screw: M2.5x7 Torx key: T8 Compatible insert manufacturer: Tungaloy ECLASS: 21180806 Product type: End mill FAQ Which insert type fits this cutter? The cutter accepts LNMU 0303 indexable inserts; use of standard LNMU 0303 inserts is recommended for the best fit. What clamping interface is required for the toolholder? A 25 mm shank interface is specified, so holders or collets designed for a 25 mm shank are appropriate for secure clamping of this tool. How many cutting edges are provided and what is the effect on finish? The tool features four cutting edges; this configuration balances material removal with surface finish and generally produces steady cutting forces. Which screw and key are used for the insert? Insert fastening requires an M2.5x7 screw and a T8 Torx key for correct clamping and repeatable torque. What are the main dimensions to consider when planning setups? Key dimensions are: 26 mm diameter, 150 mm overall length and 60 mm cutting length, which determine reach and overhang for set-up planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Solid Carbide End Mill For R390-11T3 Indexable Inserts, 90° Cutting Angle, 4 Flutes, 50mm Cutting Length - Teknik Makina
Take advantage of a high‑precision, insert‑based milling system that combines stable cutting geometry and simple clamping for predictable cycle times; the robust shank and four cutting edges support consistent chip control and long tool life. Order the insert milling cutter directly via Metav Werkzeuge or consult the technical advisers for tailored recommendations. Shaft milling cutter S595-1TM by Teknik Makina — 26 mm cutting diameter, optimized for R390-11T3 inserts Shaft milling cutter S595-1TM for light to medium milling operations with R390-11T3 indexable inserts, suited to CNC toolrooms and production environments 26 mm cutting diameter 25 mm shank diameter Compatible with Sandvik R390-11T3 inserts Four cutting edges for stable machining Consistent production through proven geometry The S595-1TM is designed around a 26 mm cutting circle and a 90° cutting angle to deliver repeatable slotting and face‑milling results. The four cutting edges reduce vibration compared with fewer‑tooth alternatives, which improves surface finish and extends insert life. For planners and production engineers, this means fewer tool changes and more predictable cycle times — a clear efficiency gain when lining up batch runs or mixed lots. Simple compatibility and secure clamping Compatibility with R390-11T3 indexable inserts from Sandvik ensures wide availability of grades and chipbreakers for the application spectrum. The insert is secured with an M2.5x7 Torx screw tightened using a T8 key, providing a compact, serviceable clamping solution. Clear identification of insert type and standardised fastening enables fast, error‑resistant changeovers on the shopfloor and straightforward inventory management. Practical machining benefits and material range With a 25 mm shank diameter and a 50 mm effective cutting length, the cutter body supports stable toolholding in standard collets and holders, reducing deflection during heavier passes. The combination of shank rigidity and multiple cutting edges favours materials where steady removal rates are required; the geometry facilitates reliable chip evacuation and consistent surface integrity across normal steels and alloyed workpieces. Handling, maintenance and workshop integration The body’s overall length of 150 mm and a weight of 0.557 kg make the tool easy to handle while still providing sufficient overhang for many common set‑ups. Routine maintenance is limited to insert and screw replacement; use of the specified Torx key prevents over‑ or under‑torquing. If application data are unclear, Metav’s precision team can advise on insert grade selection and recommended cutting parameters to match the machining task. Discuss tooling options with Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for application advice and to order the Teknik Makina S595-1TM insert milling cutter suited to existing toolholders Technical Data Article number: S595-1TM Manufacturer: Teknik Makina Compatible inserts: R390-11T3 Compatible insert maker: Sandvik Torx screw: M2.5x7 Torx key size: T8 Facts Diameter: 26 mm Shank diameter: 25 mm Cutting length (shank): 50 mm Overall length: 150 mm Cutting edges: 4 Weight: 0.557 kg Cutting angle: 90° Special features Indexable insert system Secure Torx fastening Suitable for standard collet holders Optimised geometry for chip control FAQ Which inserts fit this milling body? The S595-1TM accepts R390-11T3 indexable inserts; compatible grades from Sandvik are commonly used for a range of steels and alloyed materials. What fastening hardware is required for insert changes? Insert retention uses an M2.5x7 Torx screw and requires a T8 Torx key for secure clamping on the S595-1TM body. Is the shank suitable for standard toolholders? Yes — the 25 mm shank diameter is compatible with standard collet systems and holders typically used in CNC toolrooms for stable mounting. What benefits do four cutting edges provide? Four cutting edges balance material removal rate with vibration damping, improving surface finish and extending insert life in continuous or semi‑continuous production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Solid Shank Cutter for 3PKT 1004 Indexable Inserts L200mm with Internal Coolant - Teknik Makina
Take advantage of a compact milling solution that combines internal coolant and precise compatibility with 3PKT 1004 indexable inserts for reliable chip control and consistent surface results; order the tool via Metav Werkzeuge or consult our specialists for application advice. Shank Milling Cutter S486-1TM — 26 mm diameter with internal coolant (Teknik Makina) A robust Shank Milling Cutter S486-1TM intended for indexable-insert milling with 3PKT 1004 inserts, offering internal coolant for improved chip evacuation and secure clamping for production workflows Internal coolant for improved chip evacuation Compatible with 3PKT 1004 inserts (Taegutec) 26 mm cutter diameter, 25 mm shank 200 mm total length, balanced mass for stability Productivity gains through controlled chip evacuation and stable geometry The milling body combines an integrated internal coolant channel with a compact cutting geometry to reduce thermal load and support steady cutting conditions. With a 26 mm cutting diameter and 30 mm cutting length, the design promotes effective material removal while maintaining surface consistency. This leads to shorter cycle times and fewer interrupted runs, which is particularly valuable in repetitive workshop and small-batch production environments. The tool’s balanced mass and precise dimensions contribute to repeatable results on compatible machines. Straightforward compatibility and secure insert retention Designed for use with 3PKT 1004 indexable inserts and tested for fit with Taegutec references, the tool body simplifies inventory management when matching inserts and holders. Inserts are secured with a Torx T8 key and M2.5x7 screw, ensuring a stable seat and easy changes during maintenance. The 25 mm shank diameter provides compatibility with standard holders, enabling secure clamping and minimal run-out when the cutter is mounted in conventional collets or shrink-fit systems. Practical dimensions and handling for everyday workshop use With a 200 mm total length and a net mass around 0.773 kg, the cutter offers a balance between reach and rigidity for many routine milling tasks. The moderate overall length reduces deflection risk compared with longer tooling options, while the compact cutting length allows focus on shoulder and slot operations where indexable inserts deliver cost-effective performance. The straightforward mechanical design eases handling during tool changes and inventory checks. How this cutter supports efficiency and serviceability By combining insert interchangeability with integrated coolant distribution and standardised fastening, the tool reduces downtime associated with regrinding or frequent retooling. The construction supports predictable replacement cycles for inserts rather than entire cutters, lowering consumable costs and streamlining maintenance. For technical clarifications or compatibility checks regarding machine interfaces and insert grades, Metav’s advisers can provide targeted guidance to align the tool with specific machining tasks. For specification support and ordering of Teknik Makina cutting tools, contact Metav Werkzeuge for personalised advice and prompt supply: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S486-1TM Product type: Shank milling cutter Manufacturer: Teknik Makina Compatible inserts: 3PKT 1004 Compatible insert manufacturer: Taegutec Core dimensions Cutter diameter: 26 mm Total length: 200 mm Shank diameter: 25 mm Cutting length: 30 mm Weight: 0.773 kg Number of cutting edges: 2 Features & compatibility Internal coolant Torx key: T8 Torx screw: M2.5x7 EClass: 21180806 FAQ Is this cutter compatible with Taegutec 3PKT 1004 inserts? Yes. The Shank Milling Cutter S486-1TM is designed for 3PKT 1004 indexable inserts and is compatible with Taegutec reference inserts for straightforward interchange. Does the tool offer internal coolant supply? Yes. The milling body includes internal coolant to support chip evacuation and thermal control during cutting operations. What are the main dimensions and weight of the tool? The cutter has a 26 mm diameter, 25 mm shank, 30 mm cutting length and 200 mm total length, with a weight of approximately 0.773 kg. How are inserts fixed in the cutter? Inserts are secured using a Torx T8 key and an M2.5x7 screw, providing a stable clamping seat and easy replacement. What is the SKU and manufacturer for ordering? The tool is supplied as SKU S486-1TM by Teknik Makina and is available through Metav Werkzeuge for European distribution. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
26mm Solid Shank Cutter For BLMP 0904 Indexable Inserts With Internal Coolant, 150mm Overall Length - Teknik Makina
Take advantage of a robust combination of precise indexable-insert compatibility, internal coolant for controlled cutting temperatures and a compact 25 mm shank for secure clamping; order directly via Metav Werkzeuge or consult our specialists for specification matching. Shank milling cutter S489TM — 26 mm diameter with internal coolant (Teknik Makina) Shank milling cutter S489TM designed for indexable-insert milling with BLMP 0904 inserts, offering reliable coolant delivery and straightforward insert replacement for industrial machining. 26 mm cutting diameter for stable machining Internal coolant supply to the cutting zone Compatible with Taegutec BLMP 0904 inserts Secure clamping on a 25 mm shank Precision compatibility for indexable-insert milling This shank milling cutter combines a 26 mm cutting diameter with a holder geometry optimised for BLMP 0904 indexable inserts, enabling consistent chip formation and repeatable results. The tool is engineered for straightforward integration into existing toolholders thanks to its 25 mm shank, which supports secure clamping and minimal runout. Designed by Teknik Makina, the cutter is suitable for a broad range of general milling tasks where indexable inserts are preferred for economical edge changes and predictable tool life. The robust construction and measured mass deliver stability during engagement, helping to reduce chatter and improve surface finish. Improved tool life through directed coolant and efficient cutting edges Internal coolant channels deliver coolant directly to the insert cutting edges, reducing flank and crater wear and improving tool life under demanding conditions. The configuration with 3 cutting edges balances metal removal rate and mechanical stability, allowing efficient material engagement while maintaining cutting consistency. By targeting heat at the cutting zone, the coolant supply supports higher sustained cutting parameters and more predictable maintenance intervals. This results in lower overall machining costs for repetitive production runs and a reduced need for premature insert changes. Practical assembly and maintenance for production environments Maintenance and insert changes are simplified by standard fastenings: the cutter uses M3.5x8.5 Torx screws and a T10 Torx key, facilitating rapid indexable-insert replacement with common workshop tools. The 40 mm cutting length combined with a 150 mm overall length provides adequate reach for many operations while remaining compact enough for secure fixture. Spare parts and replacement inserts from established manufacturers such as Taegutec are compatible with the holder geometry, which eases logistics and reduces downtime. Clear mechanical design and accessible fastening points make routine checks and torque-controlled reassembly straightforward. Suitable uses and workshop advantages Engineered for industrial milling operations that favour indexable solutions, this insert holder performs well in both batch production and mixed-workshop environments. Its balance of internal coolant, sturdy shank diameter and practical cutting geometry supports tasks where controlled chip evacuation and repeatable insert positioning are priorities. Buyers benefit from the combination of compatibility with established insert systems and the backing of a reliable distributor network that emphasises quality assurance and supply reliability. If product matching or application advice is required, technical clarification is available to ensure the tool suits specific machining strategies and machine tool interfaces. Contact Metav Werkzeuge for tailored application advice and order facilitation of this Teknik Makina shank milling cutter S489TM with internal coolant Technical data Article number: S489TM Label: 26mm Schaftfräser BLMP 0904 L150mm mit Innenkühlung Product type: Shank milling cutter Brand: Teknik Makina Facts Diameter: 26 mm Overall length: 150 mm Shank diameter: 25 mm Cutting length (shank-side): 40 mm Number of cutting edges: 3 Weight: 0.612 kg Torx screw: M3.5x8.5 Torx key: T10 ECLASS: 21180806 Special features Internal coolant supply Designed for BLMP 0904 indexable inserts Compatible with Taegutec inserts SKU: S489TM Manufacturer: Teknik Makina FAQ Which inserts fit this shank milling cutter? The holder accepts BLMP 0904 indexable inserts; compatibility with Taegutec-manufactured BLMP 0904 inserts is specified for the shank milling cutter S489TM. How is coolant delivered to the cutting zone? Coolant is fed internally via channels within the insert holder body so that cooling is directed at the cutting edge to reduce heat and extend insert life. What fasteners are used for insert clamping? Insert clamping uses M3.5x8.5 Torx screws secured with a T10 Torx key, allowing controlled tightening and straightforward maintenance on the S489TM. What are the key dimensions for mounting and reach? Relevant dimensions include a 25 mm shank diameter, 150 mm overall length and a 40 mm cutting length, giving clear parameters for toolholder selection and reach. Is this tool suitable for high-speed finishing? The combination of internal coolant and a three-edge insert arrangement supports higher sustained cutting parameters; application suitability should be confirmed against specific machine and material requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
High-performance shank cutters and ball nose cutters for efficient milling
Insert shank cutters and ball nose cutters combine flexibility and productivity for a wide range of milling tasks. The category covers steel-bodied shank cutters fitted with indexable inserts for economical roughing, face milling, cornering and slotting, as well as ball nose cutters for contouring and 3D finishing.
How these tools work and where they belong
Shank cutters with indexable inserts use a carrier body made from hardened steel; the cutting edges are provided by removable inserts rather than a solid tool blank. Where tools do not have internal coolant, process heat and chips are managed via external coolant nozzles or compressed air, which is sufficient for open, surface-level and easily accessible milling on standard materials. Shank cutters with internal coolant feature fine internal channels that deliver coolant or blasting air directly to each cutting edge under pressure. This targeted supply is essential for deep pockets, cavities, full slotting and machining of heat-resistant or difficult-to-machine materials, because it prevents chip re-cutting, protects cutting edges from thermal overload and enables higher feed rates and improved surface quality.
Cut cycle times and reduce tooling costs
- Replaceable indexable inserts reduce consumable costs and shorten tool change time.
- Targeted internal coolant improves chip evacuation and extends insert life.
- Robust steel carrier bodies enable heavy-duty roughing without frequent tool replacement.
- Suitable for roughing, planing, corner milling and slot milling as well as precision 3D profiling with ball nose cutters.
A practical choice for purchasing and stocking tools
Metav brings a pragmatic purchasing advantage: a broad range of milling solutions is available from a single European quality hub. Metav’s focus on democratising precision means workshops benefit from a wide assortment, consistent quality control from Emmerich and steady supply — supported by decades of expertise and over 48,000 satisfied customers. Choose Metav for a centralised sourcing strategy that reduces supplier complexity while keeping access to both insert milling cutters (also referred to as insert milling cutters or indexable end mills) and ball nose cutters (also known as ball nose end mills or radius cutters) straightforward.
Quick summary
Insert shank cutters and ball nose cutters deliver flexible, cost-effective milling: replaceable inserts lower running costs, and internal coolant options enable higher performance and longer tool life where chip control is critical.
FAQ
When should I choose a shank cutter with indexable inserts rather than a solid carbide end mill?
Choose shank cutters with indexable inserts for economical roughing and high-stock-removal tasks where replacing inserts is preferable to replacing an entire tool; they are especially effective for face milling, cornering and slotting operations.
Does internal coolant make a measurable difference for ball nose cutters?
Yes. Internal coolant directed to each cutting edge reduces chip re-cutting and thermal stress, which improves surface finish and increases insert life when machining deep pockets, cavities or heat-resistant materials.
Can shank cutters without internal coolant be used for general workshop milling?
Absolutely. Tools without internal coolant rely on external coolant nozzles or compressed air and are well suited to open, superficial and easily accessible milling on standard materials.
What milling operations are shank cutters for indexable inserts typically used for?
Shank cutters with indexable inserts excel at economical roughing, planfräsen (face milling), corner milling and slot milling; ball nose cutters are the preferred choice for 3D profiling and finishing operations.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com