Efficient shaft cutters and ball nose cutters for versatile milling
Shaft cutters and ball nose cutters serve as robust rotating tools for roughing, face milling, corner milling and slotting, offering economical replacement of indexable inserts rather than whole solid tools. Available in versions with internal coolant to feed lubricant directly to each cutting edge or without internal coolant relying on external nozzles, these cutters ensure effective chip evacuation and thermal control suited to standard materials or deep pocket and cavity work. By preventing chip re-cutting and protecting cutting edges, they deliver higher feed rates, improved surface finish and extended tool life in demanding metalworking applications.
32mm Cutter Head For ENMX 0604 Indexable Inserts, 5 Cutting Edges, M2.5x7 Clamp Screw - Teknik Makina
Combining a 32 mm shank, five cutting edges and direct compatibility with ENMX 0604 indexable inserts, this milling cutter body provides stable chip removal and repeatable set-ups for efficient production. Order the S115TM directly via Metav Werkzeuge or consult the technical team for application guidance. S115TM – Indexable insert milling cutter, 32 mm shank, 5-cutting edges (Teknik Makina) The S115TM is an indexable insert milling cutter designed for use with ENMX 0604 indexable inserts, offering a robust solution for peripheral and face milling tasks in CNC machining environments. 32 mm shank diameter Compatible with ENMX 0604 inserts Five cutting edges for efficient removal Torx M2.5x7 fastening with T8 key Stable cutting for consistent material removal The S115TM is engineered around a 32 mm shank and a proven head geometry that supports stability under load; together the dimensions reduce chatter and enable consistent material removal rates. With five cutting edges, the cutter balances cutting force and chip load to maintain surface finish while extending indexable insert intervals. This combination supports predictable cycle times and fewer interruptions for tool change, which benefits batch production and minimises unplanned downtime. Secure clamping and straightforward insert handling A secure clamping system using a M2.5x7 Torx screw and a T8 key simplifies insert changes and repeatability of seating, reducing set-up time at the machine. Accepting ENMX 0604 inserts and compatible with YG-1 insert variants, the tool body permits the use of established insert grades for diverse workpiece materials. The clear interface between cutter and insert makes insert orientation and replacement intuitive, contributing to faster maintenance and improved process reliability in workshop and industrial settings. Designed to integrate with production workflows With a 200 mm overall length, the S115TM provides reach for a variety of milling tasks while maintaining rigidity where it matters. The tool body is intended to support steady tool life by enabling optimal insert geometry use and reducing vibration through its shank and head proportions. Integrating this cutter into existing tool sets aids a smoother production flow, since compatibility with standard ENMX 0604 inserts means inventory can be standardised and changeovers simplified, delivering operational efficiency and easier logistics. For procurement or technical advice on Teknik Makina's S115TM, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S115TM Manufacturer: Teknik Makina Eclass: 21180806 ETIM: EC011860 Core dimensions Diameter: 32 mm Shank diameter: 32 mm Overall length: 200 mm Cutting edges: 5 Features / Compatibility For ENMX 0604 indexable inserts Compatible with YG-1 inserts Torx screw: M2.5x7 Torx key: T8 Shank type: 32 mm shank FAQ Which insert type fits this milling cutter? The S115TM accepts ENMX 0604 indexable inserts, enabling the use of standard grades and geometries for common milling applications. What is the shank diameter and overall length? Shank diameter is 32 mm and the overall length is 200 mm for the S115TM tool body. How many cutting edges does the tool have and what is the benefit? The cutter has five cutting edges; this arrangement balances cutting load and helps maintain a consistent surface finish while extending insert life. Which fastening components are used for the inserts? Insert clamping is by a M2.5x7 Torx screw, removable and tightened with a T8 key, designed for quick and repeatable insert changes. Is the S115TM compatible with YG-1 inserts? Yes, the tool body is compatible with insert variants from YG-1, allowing selection of suitable grades for the workpiece material. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm End Mill for ADKT 10T3 Indexable Inserts Internal Coolant, 4 Flutes, 45mm Cutting Length - Teknik Makina
Taking advantage of a 32 mm shank and internal coolant, this indexable cutter delivers reliable chip evacuation and long tool life for insert-based milling operations; its compatibility with ADKT 10T3 inserts and Korloy tooling ensures straightforward integration into existing holder systems — order the tool directly via Metav Werkzeuge or consult the Metav team for application advice. Indexable milling cutter S081TM — 32 mm shank, internal coolant (Teknik Makina) The indexable milling cutter S081TM is a shank-mounted cutter body designed for high-performance face and shoulder milling with ADKT 10T3 indexable inserts. 32 mm shank diameter for stable clamping Internal coolant for improved chip control Compatible with ADKT 10T3 inserts (Korloy) Four cutting edges for steady material removal Coolant-fed machining for consistent results The built-in internal coolant channel is engineered to direct cutting fluid straight to the cutting zone, improving heat dissipation and chip evacuation. This design reduces thermal stress on the insert seats and can extend the service interval of the cutting edges. For workshops transitioning from solid tooling to indexable systems, the internal coolant feature provides an immediate productivity advantage by lowering the risk of edge build-up and enabling more consistent cutting conditions under moderate to heavy feeds. Rigidity and repeatability through robust dimensions With a 32 mm shank diameter and 125 mm overall length, the tool body delivers a balance between reach and stiffness that supports repeatable machining quality. The 45 mm cutting length and the configuration of four cutting edges are optimised to maintain cutting stability during shoulder and face operations. Stiff clamping coupled with the cutter’s geometric design reduces vibration, which helps to preserve surface finish and dimensional accuracy across production runs. Simple insert handling and proven compatibility The cutter accepts ADKT 10T3 indexable inserts and is compatible with inserts from Korloy, which simplifies procurement and tool management. Fastening is achieved with M2.5x5.5 screws that require a T8 Torx key for secure seating; this conventional fixing method keeps insert changes straightforward and predictable. The use of standard insert formats minimises inventory complexity and shortens downtime associated with tool changes in multi-shift production environments. Integration into production workflows and maintenance benefits Designed for repeatable performance, the tool body supports predictable cycle times and easier process planning. The cutter’s geometry and coolant routing work together to reduce insert wear, which can lower total tooling costs over time while maintaining throughput. For operations seeking to consolidate tooling suppliers and simplify logistics, Metav’s distribution from Emmerich supplies a reliable channel for replacement components, technical information and spare parts procurement. For application-specific recommendations or to source the Teknik Makina indexable milling cutter S081TM with internal coolant, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and ordering options Technical data Article number: S081TM Product type: Indexable milling cutter Manufacturer: Teknik Makina Compatibility: for ADKT 10T3 indexable inserts Inner coolant: yes SKU: S081TM Core dimensions Diameter: 32 mm Shank diameter: 32 mm Overall length: 125 mm Cutting length: 45 mm Number of cutting edges: 4 Weight: 0.7 kg ECLASS: 21180806 Design & compatibility Compatible insert manufacturer: Korloy Insert type: ADKT 10T3 Torx key size required: T8 Torx screw: M2.5x5.5 Label: 32mm Schaftfräser ADKT 10T3 L125mm mit Innenkühlung UID: S081TM FAQ Which insert geometry is required for this cutter? The cutter accepts ADKT 10T3 indexable inserts; ADKT 10T3 geometry is specified for the S081TM body and Korloy-manufactured inserts are listed as compatible. Does the tool provide internal coolant delivery? Yes, the S081TM features internal coolant routing to the cutting zone to improve heat control and chip evacuation during machining. What are the shank and overall lengths? The tool has a 32 mm shank diameter and a total length of 125 mm; the cutting portion measures 45 mm. How many cutting edges are fitted and what is the fastening method? The cutter uses four cutting edges and inserts are secured with M2.5x5.5 screws that require a T8 Torx key. Who manufactures the cutter and who supplies it in Europe? Teknik Makina is the manufacturer of the tool body, while Metav Werkzeuge supplies and supports distribution from Emmerich for European customers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm End Mill for ADKT 1204 Indexable Inserts Internal Coolant, 4 Flutes, 125mm - Teknik Makina
Benefit from a stable 32 mm shank, integrated internal coolant and compatibility with ADKT 1204 indexable inserts to increase throughput and process reliability. Order the tool directly via Metav Werkzeuge or contact our consultants for application advice and fast delivery from Emmerich. Shank milling cutter for ADKT 1204 indexable inserts — 32 mm, internal coolant, L125 mm by Teknik Makina The Shank milling cutter for ADKT 1204 indexable inserts is designed for industrial milling applications where stability, chip control and quick insert changes matter 32 mm shank diameter for stable machining Internal coolant supply for improved chip evacuation Compatible with ADKT 1204 indexable inserts Four cutting edges for high material removal rates Increased productivity through a rigid shank and precise geometry The robust 32 mm shank and overall design prioritise stability under load, reducing vibration and improving surface finish during heavy passes. The combination of a compact length and guided insert clamping supports consistent run-out and predictable tool life, which translates into fewer tool changes and higher net operating time. This results in measurable efficiency gains on repetitive production runs without compromising process reliability. Better cooling and chip evacuation for process security Integrated internal coolant channels direct cutting fluid straight to the cutting zone, improving heat dissipation and chip evacuation. That targeted coolant supply helps maintain cutting edge integrity and reduces burr formation on the workpiece. For operations where coolant-assisted machining is standard practice, this internal supply supports longer insert life and more predictable cycle times, aiding planning and reducing unexpected downtime. Secure insert fixation and proven indexable system Designed for ADKT 1204 indexable inserts and compatible with Korloy inserts, the tool uses an M3x7 Torx screw with a T8 key for secure, repeatable clamping. The four cutting edges allow balanced stock removal and lower per-edge wear, which is particularly advantageous for serial milling tasks. The familiar indexable insert format simplifies inventory management and keeps changeover times short in a busy workshop. Practical dimensions for easy integration into existing toolholders With an overall length of 125 mm and a cutting shank length of 45 mm, the cutter fits common toolholder setups while delivering substantial cutting capacity. The modest mass supports stable spindle dynamics without excessive inertia, and the compact form factor makes the cutter suitable for both compact CNC machines and larger milling centres. Identification is simplified by the SKU S053TM for ordering and stockkeeping. Discuss technical integration of the Teknik Makina shank milling cutter and secure supply via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and prompt dispatch from Emmerich. Technical data SKU: S053TM Product type: Shank milling cutter Manufacturer: Teknik Makina Label: 32mm Schaftfräser ADKT 1204 L125mm mit Innenkühlung Core measurements Diameter: 32 mm Overall length: 125 mm Shank diameter: 32 mm Cutting length (shank): 45 mm Weight: 0.68 kg Number of cutting edges: 4 Special features Internal coolant Compatible with ADKT 1204 indexable inserts Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M3x7 FAQ Which indexable inserts are compatible with this cutter? The cutter accepts ADKT 1204 indexable inserts; it is compatible with Korloy inserts and designed for secure clamping with the M3x7 Torx screw. Is the tool suitable for coolant-assisted machining? Yes, the integrated internal coolant supply directs fluid to the cutting zone to aid heat control and chip evacuation during coolant-assisted machining. How many cutting edges does the tool have and what is the benefit? The tool has four cutting edges, offering balanced material removal and improved edge life, which helps maintain stable cycle times in serial production. What are the key dimensions and identification for ordering? Key dimensions: 32 mm diameter, 125 mm overall length, 45 mm cutting shank length, weight 0.68 kg. Order as SKU S053TM for efficient stock and logistics handling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm End Mill for ADKT 1706 Indexable Inserts Internal Coolant, 45mm Cutting Length - Teknik Makina
Take advantage of a 32 mm shank, internal coolant and compatibility with ADKT 1706 indexable inserts for reliable, high-performance milling; order the shaft cutter directly via Metav Werkzeuge or ask the consultants for application advice. Shaft cutter for ADKT 1706 indexable inserts — 32 mm, internal coolant (Teknik Makina) The Shaft cutter is a 32 mm-diameter milling tool designed for robust slotting and face milling with ADKT 1706 indexable inserts, offering internal coolant for improved tool life and process stability. 32 mm shank diameter Internal coolant supply Compatible with ADKT 1706 inserts (Korloy) Consistent metal removal and reduced cycle times with internal coolant The combination of internal coolant and a solid 32 mm shank provides stable chip evacuation and consistent cutting temperatures, which translates into shorter cycle times and fewer tool changes. With a 200 mm overall length and a dedicated 45 mm cutting section, this milling tool sustains deeper engagement while maintaining surface quality. The internal coolant feed reduces built-up edge and enhances the life of the indexable inserts, making the tool suited to continuous production runs where thermal control is essential. Industrial rigidity and reliable indexable-insert economy Designed for indexable-insert milling with ADKT 1706 inserts, the cutter delivers the rigidity required for demanding operations. The three cutting edges enable balanced cutting action and predictable forces, which helps to reduce vibration and extend spindle life. Using replaceable inserts keeps operating costs lower than solid-carbide alternatives, as worn cutters can be refreshed quickly without regrinding. The tool’s compatibility with Korloy inserts ensures access to widely available grades for aluminium, steel and alloyed materials. Practical handling and quick insert replacement for uptime Maintenance and insert changes are straightforward: the clamping screw supplied uses a T15 torque key and an M4x10 screw fixation for secure seat retention. The modest 1.5 kg mass and standard shank diameter make the tool easy to mount and balance, while the clearly defined cutting length simplifies process set-up. Clear tool geometry and accessible fixing mean that insert changes are fast, supporting higher machine utilisation and predictable machining cycles. Choose the Teknik Makina shaft cutter with internal coolant for stable, high-performance milling — contact Metav Werkzeuge for technical advice and fast delivery: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: S066TM Product type: Shaft cutter Brand: Teknik Makina Suitable inserts: ADKT 1706 Shank diameter: 32 mm Overall length: 200 mm Cutting length (shank/edge): 45 mm Cutting edges: 3 Weight: 1.5 kg Torx key: T15 Fixing screw: M4x10 Special features Internal coolant Compatible with Korloy inserts Indexable-insert system for economical operation Robust shank for high stability Designed for slotting and face milling FAQ What insert type does this cutter accept? The cutter accepts ADKT 1706 indexable inserts; the tool is specified for this insert geometry to ensure correct seating and cutting performance. Is there internal coolant on the shaft cutter and why is it important? Yes, the shaft cutter features internal coolant which improves chip evacuation, reduces cutting temperatures and prolongs insert life during continuous machining. Which shank diameter and overall length does the tool have? The tool has a 32 mm shank diameter and a 200 mm overall length, providing a balance between reach and rigidity for industrial milling tasks. How are inserts secured and what tool is required? Inserts are secured with an M4x10 fixing screw tightened with a T15 Torx key, enabling consistent clamping torque and quick insert changes. Can the cutter be used with Korloy inserts? Compatibility is specified for ADKT 1706 inserts and the tool is suitable for Korloy-manufactured inserts of that designation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm End Mill For ANHX 1004-1206 Indexable Inserts, 4 Flutes 40mm Cutting Length, 90° - Teknik Makina
Take advantage of a stable tool geometry and wide compatibility: the combination of a 32 mm shaft and compatibility with ANHX 1004–1206 indexable inserts ensures repeatable milling performance and straightforward maintenance. Order the S785TM directly via Metav Werkzeuge or contact the consultants for precise technical guidance. S785TM Milling Cutter (indexable) – 32 mm diameter, 4-flute by Teknik Makina The S785TM is a robust indexable milling cutter designed for ANHX 1004–1206 indexable inserts, intended for general milling tasks in workshop and light production environments. 32 mm shaft diameter for stable clamping Compatible with ANHX 1004–1206 inserts 40 mm cutting length for deeper cuts Torx T8 screw M3x7 for secure insert fixation Stable geometry for consistent, accurate milling The cutter's 32 mm shaft diameter and 4 flutes deliver a rigid connection between spindle and cutting head, which reduces vibration and improves dimensional repeatability. A 90° cutting angle provides predictable engagement with the workpiece and is well suited to face and shoulder milling operations. For users who require reproducible tolerances, the rigid shaft and balanced flute count help maintain tool life and part quality, while the modest overall mass (approx. 0.136 kg) keeps spindle load within typical workshop limits. Deep-cut capability with proven indexable insert compatibility Designed with a 40 mm cutting length, this tool enables deeper cuts while maintaining chip control and surface finish. Accepting ANHX 1004–1206 indexable inserts means the cutter can be reconditioned quickly by replacing worn inserts rather than the entire body. Indexable systems reduce tooling costs over time: once an insert reaches wear limits it can be rotated or replaced, restoring cutting performance without regrinding. Compatibility with Palbit-specified inserts ensures a wide selection of grades for steel, stainless steel or cast materials where appropriate. Secure clamping for rapid insert changes and reliable performance Insert retention is engineered for workshop efficiency: the cutter uses a Torx T8 drive and M3x7 fixing screws to clamp inserts reliably. Tight, repeatable clamping minimises micro-movement under cutting forces and supports consistent surface finish across multiple setups. The Torx interface reduces the risk of cam-out during torqueing, keeping insert seating precise and facilitating faster tool changes on the shop floor — a practical advantage where downtime costs are significant. Suited to workshop workflows and dependable supply With an overall length of 150 mm and a balanced design, the tool integrates easily into common tool holders and machining centres used in small series production and maintenance shops. The indexable configuration supports quick adaptation to different grades and geometries of inserts, helping workshops maintain throughput without complex retooling. Combined with Metav Werkzeuge’s sourcing and logistics, the cutter is positioned as a practical choice for teams aiming to streamline tooling inventories while retaining machining precision. For secure supply of Teknik Cutting Tools’ S785TM indexable milling cutter and tailored advice on insert grades and clamping, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: S785TM Manufacturer: Teknik Makina Weight: 0.136 kg Facts Shaft diameter: 32 mm Cutting length: 40 mm Overall length: 150 mm Cutting angle: 90° Number of flutes: 4 Special features Compatible with ANHX 1004–1206 indexable inserts Insert supplier fit: Palbit Torx key size: T8 Torx screw: M3x7 FAQ Which inserts fit this cutter? The S785TM accepts ANHX 1004–1206 indexable inserts; the tool is designed for those insert geometries and sizes and is compatible with Palbit-specified grades. Is the cutter suitable for deep shoulder milling? Yes, the 40 mm cutting length and rigid 32 mm shaft make the cutter suitable for deeper shoulder milling where controlled chip evacuation and stability are required. How are the inserts secured and changed? Inserts are secured with an M3x7 screw operated via a Torx T8 key, enabling reliable clamping and quick replacement on the shop floor. Can this tool be used for stainless steel and aluminium? Material suitability depends on the chosen insert grade; the cutter body accepts standard ANHX inserts, so selecting appropriate Palbit grades provides options for stainless steel, aluminium and other materials. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm End Mill for AP-- 1604 Indexable Inserts With Internal Coolant, 120mm Length - Teknik Makina
Reliable productivity and stable clamping are provided by the combination of internal coolant and compatibility with Korloy AP-- 1604 inserts. Benefit from a rigid 25 mm shank and a 32 mm cutting head for consistent material removal; order or request advice via Metav Werkzeuge for fast delivery from Emmerich. Shank milling cutter S260-1TM for AP-- 1604 indexable inserts, 32 mm, internal coolant (Teknik Makina) A Shank milling cutter S260-1TM designed for indexable‑insert milling where coolant delivery and secure fastening support continuous industrial production 32 mm cutting head diameter Internal through‑coolant Compatible with Korloy AP-- 1604 inserts 25 mm shank for rigid clamping Higher throughput through stable cutting geometry The combination of a robust 32 mm cutting head and three cutting edges yields steady chip load and predictable cutting forces, which translates into higher throughput in batch operations. The use of indexable inserts enables quick refreshment of the cutting edge without regrinding, reducing machine downtime and simplifying tool management. For production planners this means fewer interruptions and a reproducible surface finish on repeated workpieces. Coolant at the cutting zone for extended insert life Integrated internal coolant channels deliver lubricant and cooling directly to the cutting zone, helping to control temperatures and improve chip evacuation. That targeted cooling reduces thermal wear on the insert seating and can lead to longer tool life, particularly under demanding cutting conditions. The design supports conventional coolant systems and contributes to process stability during extended cycles. Secure clamping and fast, maintenance‑friendly assembly A 25 mm shank ensures solid clamping in standard collets and shrink holders, minimising run‑out and vibration. Insert retention uses a Torx drive to provide repeatable torque; the key and screw specification are T15 and M4x10, allowing quick, tool‑based insert changes and consistent clamping force. The assembly concept shortens maintenance intervals and reduces setup variability on the shop floor. Clear dimensions and workshop compatibility for procurement Key dimensions are plainly stated for straightforward integration: 120 mm overall length with a 45 mm effective cutting length and a compact weight of 0.469 kg, supporting ergonomic handling during tool changes. The cutter accepts AP-- 1604 indexable inserts from Korloy, easing procurement of replacements and ensuring compatibility across widely used insert ranges. Documentation and SKU referencing simplify stock keeping and reordering within an organised tooling system. Contact Metav Werkzeuge for tailored advice on the Teknik Makina S260-1TM, compatibility with Korloy AP-- 1604 inserts and reliable delivery from Emmerich. Technical Data Article number: S260-1TM Product type: Shank milling cutter Brand: Teknik Makina Compatible inserts: AP-- 1604 (Korloy) Facts Diameter: 32 mm Overall length: 120 mm Shank diameter: 25 mm Cutting length: 45 mm Cutting edges: 3 Weight: 0.469 kg Special features Internal cooling Torx key: T15 Torx screw: M4x10 SKU: S260-1TM FAQ What inserts fit this cutter? The S260-1TM accepts AP-- 1604 indexable inserts; compatibility with Korloy AP-- 1604 inserts is specified for straightforward replacement. Does the internal coolant enable through‑coolant machining? Yes. The internal coolant channels on the S260-1TM deliver coolant directly to the cutting zone, improving chip evacuation and aiding thermal control. Which dimensions are essential to confirm before ordering? Confirm the 32 mm head diameter, 25 mm shank diameter and 120 mm overall length; the SKU S260-1TM ensures the correct item is supplied. What fastening tools and screws are required for insert changes? Insert retention uses a Torx T15 drive and M4x10 screws; these standard fittings support reliable and repeatable insert clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm End Mill for APKT 1003 Indexable Inserts With Internal Coolant, 100mm Overall Length - Teknik Makina
Take advantage of a compact, indexable milling system that combines efficient chip control and straightforward insert changes for reduced cycle times and predictable tool life; order this cutter through Metav Werkzeuge or consult our technical team for application-specific advice. 32 mm Shank Milling Cutter (for APKT 1003 indexable inserts) – Teknik Makina 32 mm Shank Milling Cutter (for APKT 1003 indexable inserts) is a shank-mounted milling tool engineered for CNC milling operations requiring indexable-insert performance and internal coolant delivery. 32 mm diameter with 4 cutting edges Internal coolant for improved chip evacuation Shank Ø 25 mm, L overall 100 mm Compatible with APKT 1003 Korloy inserts Consistent cycle times through controlled chip evacuation The tool's internal coolant channel and 4 cutting edges deliver predictable chip flow and thermal control, which reduces the risk of built-up edge and extends insert life. By supplying coolant directly to the cutting zone, the arrangement lowers temperatures at the insert edge and helps evacuate chips from pockets and slots, so machining interruptions are reduced and process stability improves. This results in more reliable cycle times and fewer unscheduled tool changes in series production. Rigidity and compact design for precision milling A shank Ø 25 mm combined with an overall length of 100 mm and a cutting length of 35 mm minimises overhang while maintaining a stiff tool set-up. The reduced projection increases bending stiffness and lowers radial run-out, which benefits dimensional accuracy and surface finish when performing slotting or light shoulder milling. The tool's mass and design support consistent concentricity during high-speed rotations, supporting reproducible results across batches. Fast, service-friendly insert system for efficient shopfloor routines Designed for use with APKT 1003 indexable inserts from Korloy, the cutter enables rapid insert replacement and secure clamping via a Torx T8 screw (type M2.5x5.5). The indexable concept separates cutting geometry from the body, allowing cost-effective reconditioning of cutting edges and quick changeovers. For workshops aiming to reduce non-productive time, this system shortens maintenance tasks and keeps machines cutting rather than standing idle. Speak to Metav Werkzeuge about Teknik Makina's shank milling range with internal coolant for tailored machining recommendations and reliable European supply from Emmerich Technical data SKU: S152-1TM Brand: Teknik Makina Product type: Shank milling cutter Dimensions & weight Diameter: 32 mm Overall length: 100 mm Shank diameter: 25 mm Cutting length: 35 mm Number of cutting edges: 4 Weight: 0.415 kg Torx key: T8 Screw: M2.5x5.5 Internal coolant: yes Materials & compatibility Compatible inserts: APKT 1003 Suitable insert manufacturer: Korloy Product category: Shank milling cutters SKU identifier: S152-1TM FAQ What insert type does the cutter accept? The cutter accepts APKT 1003 indexable inserts, specified for use with the Teknik Makina shank milling cutter (SKU S152-1TM). Is the tool supplied with internal coolant? Yes, the shank milling cutter is equipped with internal coolant routing to the cutting zone for improved chip evacuation. Which shank diameter is required for mounting? The tool features a 25 mm shank diameter and requires a compatible holder or spindle collet sized for Ø 25 mm. How many cutting edges are available per head? The milling head is configured with 4 cutting edges, supporting steady material removal and process stability. Which screw and key are used for the inserts? Inserts are secured with a Torx T8 screw, size M2.5x5.5, enabling quick and secure insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak No:9, Selcuklu/KONYA/TURKEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32mm End Mill for APKT 1003 Indexable Inserts With Internal Cooling, 60mm Cutting Length - Teknik Makina
Benefit from the combination of a 32 mm shank, internal coolant and compatibility with APKT 1003 indexable inserts to secure stable material removal and extended tool life; order the S189-1TM directly via Metav Werkzeuge or contact the consultants for tailored technical advice. S189-1TM Shank milling cutter – 32 mm shank, internal coolant (Teknik Makina) A Shank milling cutter S189-1TM designed for coolant-fed milling with APKT 1003 indexable inserts, suitable for a wide range of general milling tasks in production environments. 32 mm shank diameter Integrated internal coolant Compatible with APKT 1003 inserts 200 mm overall length, 60 mm cutting length High-efficiency cutting for continuous production Engineered for repeatable performance, this shank milling cutter features a 32 mm shank and a 60 mm cutting length, providing a balanced combination of rigidity and material engagement. The geometry supports stable chip formation when fitted with APKT 1003 indexable inserts, which reduces chatter and improves surface finish on both roughing and finishing passes. By pairing a compact cutting zone with a robust shank, the tool minimises deflection under load, allowing higher feed rates and consistent cycle times in repetitive production processes. The result is increased throughput with predictable results across batches. Coolant-fed design that prolongs tool life The integrated internal coolant channel directs cutting fluid precisely to the insert edge, effectively reducing heat at the cutting zone and improving chip evacuation. This targeted coolant delivery reduces thermal wear and allows the inserts to retain cutting performance for longer, which in turn lowers tooling change frequency and downtime. For operations where thermal stability is critical—such as interrupted cuts or deep pocketing—the internal feed helps maintain dimensional accuracy and surface integrity throughout long runs, supporting predictable maintenance intervals. Compatibility and straightforward maintenance Designed for use with APKT 1003 indexable inserts from Korloy, the cutter accepts standard insert grades and geometries, enabling straightforward selection for different materials and cutting strategies. The tool is supplied with a Torx screw mounting system (Torx key T8, screw M2.5x5.5), simplifying insert changes and ensuring repeatable seating torque. Clear mechanical interfaces reduce setup time and lower the risk of incorrect assembly, making the shank cutter an efficient choice for workshops that need reliable insert exchange and minimal tooling complexity. Robust construction for versatile machining Manufactured by a recognised tooling partner, the design emphasises a durable body and precise concentricity to keep vibrations low during high-volume machining. With 4 cutting edges and a total length optimised at 200 mm, the cutter suits both face and light shoulder milling applications in steel and general workshop materials. The solid construction supports stable chip loads and contributes to repeatable dimensional outcomes, which is essential for component series that demand consistent tolerances and surface quality. For coolant-fed, compatible milling with guaranteed supply reliability, contact Metav Werkzeuge to discuss technical details or to arrange a procurement consultation on the Teknik Cutting Tools S189-1TM shank milling cutter; Metav’s consultants in Emmerich can advise on grades, inserts and delivery options. Technical data Article number: S189-1TM Label: 32 mm shank milling cutter for APKT 1003 L200 mm with internal coolant SKU: S189-1TM Product type: Shank milling cutter Brand: Teknik Makina Data Shank diameter: 32 mm Overall length: 200 mm Cutting length: 60 mm Weight: 1.253 kg Number of cutting edges: 4 Special features Internal coolant supply: yes Compatible inserts: APKT 1003 Inserts manufacturer compatibility: Korloy Torx key: T8 Torx screw: M2.5x5.5 eClass: 21180806 FAQ What insert type fits this shank milling cutter? The cutter accepts APKT 1003 indexable inserts; compatibility with Korloy-specified grades is standard for the S189-1TM. Is the coolant internal or external, and how does it help? Internal coolant is integrated into the tool body; the S189-1TM directs fluid to the cutting edge to reduce heat, improve chip evacuation and extend insert life. What are the key dimensions to check for machine compatibility? Check the 32 mm shank diameter and 200 mm overall length for spindle and toolholder fit; the 60 mm cutting length determines material engagement depth. How is insert retention handled on this shank cutter? The tool uses a Torx screw system (Torx key T8, screw M2.5x5.5) for repeatable insert clamping and straightforward maintenance on the S189-1TM. Which materials is this cutter typically used on? The design targets general workshop applications and steel machining where APKT 1003 inserts are suitable; select insert grade according to material and cutting strategy. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32mm End Mill For APKT 1604 Indexable Inserts 3 Flutes 45mm Cutting Length, 90° Cutting Angle - Teknik Makina
Benefit from stable clamping and efficient material removal thanks to a 32 mm cutting diameter and a shank Ø25 mm, combined with a three-edge geometry and a 90° cutting angle for predictable cycle times. Order the S260TM directly via Metav Werkzeuge or ask the consultants for tailored advice. S260TM indexable shank milling cutter – Ø32 mm, shank Ø25 mm (Teknik Makina) the S260TM indexable shank milling cutter is designed for precise face and shoulder milling using APKT 1604 indexable inserts in CNC and manual milling setups 32 mm cutting diameter Shank Ø25 mm, overall length 120 mm Compatible with APKT 1604 inserts Reliable machining performance with predictable results The tool delivers consistent cutting behaviour through a 32 mm cutting diameter and a balanced three cutting edges layout. This geometry reduces vibration and evens out tool wear, which supports repeatable tolerances in serial production. The 90° cutting angle enables efficient shoulder milling and square-sided features, translating into shorter cycle times and fewer tool changes for batch runs. Fast insert changes and secure clamping to reduce downtime Indexable inserts are secured with a M4x10 Torx screw, tightened using a T15 key, which simplifies maintenance and keeps setup time to a minimum. The cutter is specified for APKT 1604 inserts and is compatible with inserts from Korloy, allowing immediate use with established insert grades. Quick replacement of inserts supports uninterrupted production and straightforward service routines in a busy workshop. Stable mounting and compact handling for varied toolholders A shank diameter of 25 mm provides secure engagement with common collet and chuck toolholders while the overall length of 120 mm keeps the assembly compact for reduced overhang. The cutter’s modest mass (approx. 0.469 kg) contributes to lower spindle load during rapid traverses and is beneficial where tool change dynamics and balance are relevant. The design supports efficient inventory management by using widely available APKT 1604 inserts for fast replenishment. For order placement, specification checks or procurement advice for the S260TM by Teknik Makina, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert assistance Technical data Article number: S260TM Manufacturer: Teknik Makina Name: Indexable shank milling cutter for APKT 1604 Indexable Inserts Facts Diameter: 32 mm Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Cutting edges: 3 Cutting angle: 90° Weight: 0.469 kg Special features Compatible inserts: APKT 1604 Compatible insert manufacturer: Korloy Torx screw: M4x10 Torx key size: T15 eClass: 21180806 ETIM: EC011860 FAQ How are the indexable inserts fixed in place? The S260TM secures APKT 1604 inserts with an M4x10 Torx screw; use a T15 key for clamping and removal. Can Korloy inserts be used with this cutter? Yes, the cutter is specified for APKT 1604 inserts and is compatible with Korloy APKT 1604 grades. What shank size is required for mounting? The tool features a shank diameter of 25 mm, suitable for standard collet and chuck toolholders that accept this diameter. How many edges does the cutter have and what is the machining benefit? The cutter has three cutting edges; this configuration provides a good compromise between material removal rate and surface finish, with balanced wear across inserts. What are the key dimensions to note for tool planning? Important dimensions are Ø32 mm cutting diameter, 45 mm cutting length and 120 mm overall length; weight is approximately 0.469 kg. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm End Mill For APKT 1604 Indexable Inserts, 3 Flutes 55mm Cutting Length, 90° Cutting Angle - Teknik Makina
Take advantage of stable, repeatable machining thanks to the Ø32 mm shank and three cutting edges, combined with compatibility for APKT 1604 indexable inserts for fast insert changes and consistent surface finish. Order the S270TM directly via Metav Werkzeuge or ask our consultants if needed. S270TM — Indexable insert milling cutter, Ø32 mm shank, Teknik Makina S270TM is an indexable insert milling cutter designed for reliable roughing and finishing in general metalworking applications using APKT 1604 inserts. Ø32 mm shank diameter Compatible with APKT 1604 inserts Three cutting edges for stable cutting Overall length 150 mm for deeper reach Higher productivity with predictable metal removal The S270TM combines a 32 mm shank with a 55 mm effective cutting length to deliver a balance of rigidity and reach that supports consistent metal removal rates. Using APKT 1604 indexable inserts reduces downtime for tool changes: worn edges are replaced quickly without reclamping the holder, improving uptime at the machine. The cutter’s three cutting edges ensure smoother chip flow and reduced vibration compared with fewer-edge alternatives, which translates into a more reliable surface quality and longer insert life per edge. For planners and shop managers this means more predictable cycle times and easier process control. Robust design for everyday workshop demands Engineered for use in production and maintenance environments, the tool features a solid shank construction with a total length of 150 mm and a mass of approximately 0.876 kg, giving a stable feel in the toolholder. The 90° cutting geometry provides versatile face and peripheral milling capability, suitable for a wide range of steels and general-purpose applications. The assembly uses an M4x10 Torx screw secured with a T15 key, simplifying insert fastening and ensuring repeatable clamping torque. This practical, serviceable design reduces setup complexity and supports consistent part quality during extended runs. Versatile insert compatibility for flexible tooling strategies The cutter accepts standard APKT 1604 indexable inserts and is listed as compatible with Korloy inserts, enabling procurement flexibility and fast access to proven grades for different materials. By separating cutter body and insert grade decisions, users can adapt cutting data to component material — from general steels to alloyed materials — without replacing the holder. The modular approach lowers tooling inventory costs while offering quick on-machine changes. For operations seeking to streamline tooling, this configuration supports a clear cost-to-performance optimisation strategy. For reliable supply and application advice on the Teknik Makina S270TM indexable insert cutter, contact Metav Werkzeuge to arrange stock checking and technical guidance tailored to specific machining tasks. Technical data Article number: S270TM Brand: Teknik Makina Description: Indexable insert milling cutter for APKT 1604 indexable inserts Facts Shaft diameter: 32 mm Cutting length (effective): 55 mm Overall length: 150 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.876 kg Special features For APKT 1604 indexable inserts Compatible inserts manufacturer: Korloy Torx screw: M4x10 Torx key size: T15 SKU: S270TM FAQ Which inserts fit this milling cutter? The cutter is designed for APKT 1604 indexable inserts; Korloy grades are suitable choices for typical applications with the S270TM. What are the key dimensions of the tool? The S270TM has a 32 mm shank diameter, 55 mm effective cutting length and an overall length of 150 mm, providing a balance of rigidity and reach. How many cutting edges does it have and what is the geometry? This indexable cutter uses three cutting edges with a 90° cutting angle to enable stable peripheral and face milling operations. What fastening hardware is required for insert clamping? Insert clamping uses an M4x10 Torx screw, tightened with a T15 Torx key for secure and repeatable clamping on the S270TM. Who manufactures and supplies this tool? The tool is produced by Teknik Cutting Tools and is available through Metav Werkzeuge under SKU S270TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm End Mill for APMT 11T3 Indexable Inserts with Internal Coolant, 4 Teeth, 40mm Cutter Length - Teknik Makina
Take advantage of a robust combination of internal coolant and a secure 32 mm shank to improve cycle stability and extend insert life. The tool's compatibility with APMT 11T3 indexable inserts (Korloy) and a compact 125 mm overall length make it efficient for space-conscious setups. Order the cutter directly via Metav Werkzeuge or consult our specialists for application-specific advice. Indexable insert shank cutter S240-1TM — 32 mm shank, internal coolant (Teknik Makina) The Indexable insert shank cutter S240-1TM is a coolant-fed milling tool engineered for insert-mounted machining with APMT 11T3 inserts, suitable for stable roughing and semi-finishing operations. 32 mm shank for secure clamping Internal coolant for extended tool life Compatible with APMT 11T3 Korloy inserts 125 mm overall length, 40 mm cutting length Improved tool life through controlled cooling and chip evacuation The presence of internal coolant directs cutting fluid precisely to the cutting edge, reducing thermal load and enabling more consistent cutting temperatures. This results in longer insert life and fewer unscheduled tool changes, which increases uptime in production environments. By combining coolant delivery with an indexable system for APMT 11T3 inserts, the cutter supports repeatable performance under varying cutting conditions while keeping maintenance straightforward. Stable clamping and predictable machining dynamics A 32 mm shank diameter provides a stiff connection to the holder, reducing vibration and improving surface integrity when machining. The tool features 4 cutting edges, which distribute cutting forces evenly and help maintain cutting balance at elevated feeds. Secure fastening using the specified T8 Torx engagement and M2.5x6.5 screw ensures reliable insert retention, making the system suitable for continuous production where reproducible tool setup is essential. Compact design with workshop-friendly handling and compatibility With an overall length of 125 mm and a 40 mm cutting length, the cutter balances accessibility and reach for confined set-ups while maintaining rigidity. The design accepts standard APMT 11T3 inserts and is matched to Korloy inserts as specified, simplifying procurement and inventory management. The relatively modest mass supports rapid axis accelerations without compromising process stability, helping operations achieve efficient cycle times with predictable quality. For procurement or technical guidance on the Teknik Cutting Tools S240-1TM with internal coolant, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific machining tasks or to place an order Technical data Article number: S240-1TM Manufacturer: Teknik Makina Label: 32mm Schaftfräser APMT 11T3 L125mm mit Innenkühlung SKU: S240-1TM Core specifications Diameter: 32 mm Overall length: 125 mm Shank diameter: 32 mm Cutting length: 40 mm Number of cutting edges: 4 Weight: 0.764 kg Torx key: T8 Torx screw: M2.5 x 6.5 Internal coolant: Yes Special features Fits APMT 11T3 indexable inserts Compatible with Korloy inserts Insert-mounted milling cutter Robust shank for stable clamping FAQ Which inserts are compatible with this cutter? The shank cutter S240-1TM is designed for APMT 11T3 indexable inserts and is specified to work with Korloy inserts as indicated in the product data. Is internal coolant integrated into the tool? Yes — the S240-1TM features internal coolant, which delivers cutting fluid directly to the insert seat and cutting edge to aid cooling and chip evacuation. What clamping interface and fastening hardware are specified? The cutter uses a secure clamping arrangement with a T8 Torx engagement and an M2.5 x 6.5 screw for insert retention, ensuring consistent insert seating and torque control. What are the physical dimensions of the cutter? Key dimensions are: 32 mm diameter, 125 mm overall length and 40 mm cutting length, with a tool weight of 0.764 kg. How many cutting edges does the tool have and what is the benefit? The cutter has 4 cutting edges, which distribute load and support balanced cutting forces for improved stability and surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm End Mill For APXT 1003 Indexable Inserts 4 Flutes 45mm Cutting Length, 90° - Teknik Makina
Take advantage of a robust combination of a 32 mm shank, compatibility with APXT 1003 indexable inserts and four cutting edges for stable, repeatable material removal; this design supports reliable face and peripheral milling. Order directly via Metav Werkzeuge or consult our specialists for machining recommendations. Shank cutter S181TM – indexable cutter for APXT 1003, 32 mm shank The Shank cutter S181TM is a shank-mounted indexable milling cutter engineered for secure insert clamping and efficient face milling in general workshop and production environments. 32 mm shank diameter Compatible with APXT 1003 inserts Four cutting edges for balanced cutting 90° cutting angle for face milling Consistent material removal with reduced vibration The S181TM is designed as an indexable insert cutter with a 32 mm shank and a moderate overall length, giving a predictable stiffness-to-reach ratio. The combination of a substantial shank diameter and four cutting edges minimises chatter and spreads cutting forces across multiple edges, which leads to more uniform tool wear and improved surface finish. The 90° cutting angle is particularly advantageous for face milling operations where axial engagement and flat surfaces are priorities, enabling stable passes with consistent material removal rates. Fast insert changes and secure clamping for high uptime Tool change efficiency is built in: inserts for this holder follow the APXT 1003 format and are secured with an M2.5x5.5 Torx screw, tightened using a T8 key. The straightforward clamping concept reduces downtime during index changes and routine maintenance. Reduced changeover time improves machine utilisation and makes the cutter a practical choice where frequent insert indexing is part of the process. The robust fixing method also contributes to repeatable axial and radial run-out, supporting precise, repeatable cuts. Practical dimensions for workshop flexibility With an overall length of 150 mm and a cutting length of 45 mm, this tool balances accessibility and rigidity for common milling tasks. The nominal diameter is 32 mm, and the tool weight is approximately 0.916 kg, values that reflect a stable toolholder suitable for both automated and manual setups. These dimensional characteristics make the shank-mounted cutter suitable for conventional face milling and light shoulder work where tool stability and predictable deflection behaviour are required. Clear compatibility and maintenance facts The holder is produced for use with APXT 1003 style indexable inserts and is listed as compatible with inserts from Korloy, simplifying procurement and replacement logistics. The design uses a standard Torx screw specification for insert fixation, enabling maintenance with commonly available tools. Spare parts and replacement inserts follow industry-standard formats, which helps to keep inventory manageable and reduces lead times for production-critical components. Select the Teknik Cutting Tools S181TM for dependable indexable milling performance and contact Metav Werkzeuge for tailored technical advice or ordering assistance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S181TM Manufacturer: Teknik Makina Designation: Shank cutter for APXT 1003 indexable inserts Facts Shank diameter: 32 mm Cutting length: 45 mm Overall length: 150 mm Cutting edges: 4 Weight: 0.916 kg Cutting angle: 90° Diameter: 32 mm Special features For APXT 1003 indexable inserts Compatible with Korloy inserts Torx screw: M2.5x5.5 Torx key size: T8 SKU: S181TM FAQ Which insert type does this cutter accept? The cutter accepts APXT 1003 indexable inserts; the holder is configured specifically for this insert format. How are the inserts fastened and which tool is required? Inserts are secured with an M2.5x5.5 Torx screw; a T8 Torx key is used for tightening and loosening. What machining tasks is the cutter intended for? This shank-mounted cutter is intended for face milling and general indexable milling tasks where a 90° cutting angle and balanced cutting edges are beneficial. Is the cutter compatible with Korloy inserts? Yes, the tool is listed as compatible with Korloy-manufactured inserts that match the APXT 1003 geometry. What are the key dimensional data to consider for setup? Important setup dimensions include a 32 mm shank diameter, 45 mm cutting length and 150 mm overall length, which affect stiffness and reach during machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm End Mill For F75° APKT 1003 Indexable Inserts, 3 Flutes 100mm Overall Length - Teknik Makina
Take advantage of a compact solution that combines robust insert compatibility with a stable shank design for consistent results and reduced changeover times; order directly via Metav Werkzeuge or consult their specialists for application advice. Shank milling cutter for F75° APKT 1003 indexable inserts – Teknik Makina Shank milling cutter for medium-duty face and shoulder milling with indexable inserts, suited to operations that prioritise quick insert changes and machining stability Compatible with Korloy APKT 1003 inserts 32 mm cutting diameter, 25 mm shank 75° cutting angle for versatile face milling Three cutting edges for stable material removal Consistent results through proven geometry and insert compatibility The Shank milling cutter is built around a defined cutting geometry that supports reliable chip formation and surface finish. With a 75° cutting angle and a 32 mm cutting diameter, the tool enables controlled face and shoulder milling on a range of workpieces. Compatibility with APKT 1003 indexable inserts from Korloy reduces toolholder complexity and makes insert procurement straightforward. The three-flute design ensures stable cutting forces and helps maintain dimensional accuracy during interrupted cuts. Technical specifications like the 25 mm shank and 100 mm overall length make the cutter suitable for standard arbors and extensions commonly found in workshop setups. Faster changeovers and predictable tool life for productive shops Tool changes are simplified by the supplied fastening arrangement: a M2.5x5.5 Torx screw (T8) secures each insert, allowing quick replacement and minimising downtime. The indexable-insert concept separates cutting geometry from the body, so wear on the cutter body does not directly affect cutting performance; worn edges are swapped for fresh ones, restoring cutting behaviour without complex regrinds. The combination of insert standardisation and a compact shank contributes to predictable maintenance intervals and lower lifecycle costs, while the measured mass of 0.413 kg ensures manageable handling during tool changes. Practical handling, integration and workshop benefits Workshops benefit from a compact package that integrates easily into existing toolrooms: the 25 mm shank diameter fits common collets and holders, while an overall length of 100 mm balances reach with rigidity. Three cutting edges distribute the load for smoother engagement and reduced vibration, which supports improved surface quality and longer insert life. The tool’s design aligns with corporate metrology and quality expectations by providing consistent repeatable results in production environments. For users who require tailored advice on machining parameters or holder compatibility, Metav Werkzeuge provides technical guidance from its Emmerich location to ensure efficient implementation. For professional milling operations using Teknik Makina components, contact Metav Werkzeuge for application guidance and assured supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S344TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Numbers / Core technical data Cutting diameter: 32 mm Shank diameter: 25 mm Cutting length: 35 mm Overall length: 100 mm Number of cutting edges: 3 Cutting angle: 75° Weight: 0.413 kg Designs / Special features Compatible inserts: APKT 1003 (Korloy) Torx screw: M2.5x5.5 (T8) Indexable-insert system Three-flute geometry FAQ What inserts fit this shank milling cutter? The cutter is designed for APKT 1003 indexable inserts; compatibility with Korloy inserts is specified for reliable seating and cutting geometry. Is the shank suitable for standard tool holders? Yes, the 25 mm shank diameter conforms with common collet and holder sizes used in general workshop and production environments. How are the inserts secured? Inserts are fastened with an M2.5x5.5 Torx screw (T8), enabling quick and secure replacement without special tooling. What machining tasks does this cutter cover best? The tool is intended for face and shoulder milling where a 75° cutting angle and three-edge geometry deliver stable chip evacuation and consistent surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm End Mill for Korloy LNMX 1510 inserts - Teknik Makina
Product Technical Details: Order Number: S361TM Item: End Mill usable with LNMX 1510 Indexable Inserts the Hersteller's Korloy Brand: Teknik Makina Metric Information: Diameter: 32mm Cutting Edges: 2 Weight: 0.885kg Total length: 150mm Manufacturer Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible for Europe Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, Germany, eMail: info@metav-werkzeuge.com
32mm End Mill for LNMX 1004 Indexable Inserts With Internal Coolant, 150mm Overall Length - Teknik Makina
Take advantage of a robust, indexable-insert solution that combines a rigid Ø32 mm shank, internal coolant and a 70 mm cutting length for reliable chip evacuation and consistent material removal; order the cutter directly via Metav Werkzeuge or consult our specialists for application advice. Indexable Insert Milling Cutter S095TM (Ø32 mm) by Teknik Makina — internal coolant, L150 mm Indexable Insert Milling Cutter S095TM for LNMX 1004 indexable inserts, engineered as a shank-mounted cutter body for efficient milling tasks in workshop and production environments. Ø32 mm shank for stable clamping Internal coolant for improved tool life 4 cutting edges for steady material removal Compatible with LNMX 1004 Korloy inserts Consistent cutting performance through rigid design The milling body features a Ø32 mm shank and a total length of 150 mm, delivering the axial stability required for repeatable grooves and face milling. With a 70 mm cutting length and 4 cutting edges, the tool generates balanced chip load distribution that reduces vibration. The resulting improvement in process stability is reflected in more consistent surface finishes and reduced rework, while the 0.75 kg mass helps maintain momentum without unnecessary strain on spindle bearings. Optimised coolant routing and insert interface Equipped with internal coolant, the cutter directs coolant precisely to the insert cutting zones, promoting effective cooling and improved chip control. The body is specified for LNMX 1004 indexable inserts and is compatible with Korloy manufactured inserts, allowing straightforward insert changes. Fixing hardware uses T15 Torx engagement and M4x10 Torx screws for secure clamping of inserts, which simplifies maintenance and shortens replacement time during tool changes. Practical benefits for the workshop and production line As an indexable-insert tool, the cutter body reduces toolholder inventory by enabling multiple inserts to be fitted on a single shank tool, cutting tooling costs and setup complexity. The modular nature of the system ensures that wear is managed at the insert level rather than the entire tool, making downtimes shorter and consumable replacement more economical. The robust construction supports steady cutting parameters, which aids throughput and repeatability in batch production. Quick maintenance and reliable compatibility Maintenance is made straightforward by standardised fastening and widely available insert types. The use of a Torx T15 key and M4x10 screws ensures repeatable clamping torque during reassembly; spare screws and keys are commonly stocked. The cutter body’s compatibility with LNMX 1004 inserts from Korloy allows selection of grades and geometries tailored to the workpiece material and cutting strategy, providing a flexible solution for varied milling tasks. For procurement or application guidance on the Teknik Makina S095TM with internal coolant, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a tailored supply and technical consultation Technical data SKU: S095TM Manufacturer: Teknik Makina Product type: Milling cutter (shank cutter) Label: 32mm shank cutter LNMX 1004 L150mm with internal coolant Core measurements Diameter: 32 mm Total length: 150 mm Shank diameter: 32 mm Cutting length: 70 mm Number of cutting edges: 4 Weight: 0.75 kg Design and special features Internal coolant: yes Compatible insert type: LNMX 1004 Compatible insert manufacturer: Korloy Torx key: T15 Torx screw: M4x10 FAQ What insert type does this cutter accept? The cutter accepts LNMX 1004 indexable inserts; Korloy inserts in this format are compatible with the S095TM. Is the coolant internal or external on the tool? The tool is supplied with internal coolant, which channels fluid directly to the insert cutting edges for improved cooling and chip evacuation. How many cutting edges does the cutter have? The cutter body is configured for 4 cutting edges, providing balanced material removal and steady cutting forces. What is the shank diameter and overall length? The tool has a Ø32 mm shank and a total length of 150 mm, with a cutting length of 70 mm. Which fastening hardware is used for the inserts? Inserts are secured with M4x10 Torx screws and require a T15 Torx key for fitting and removal. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm End Mill For R390 17 Indexable Inserts With Internal Coolant, 120mm L - Teknik Makina
Take advantage of a compact, high-performance milling solution that combines 32 mm cutting diameter, internal coolant and compatibility with R390 17 indexable inserts for consistent cycle times and low downtime. Order this insert milling cutter directly via Metav Werkzeuge or consult our specialists for application-specific advice. Shaft milling cutter S514-1TM — 32 mm, internal coolant, for R390 17 indexable inserts (Teknik Makina) The Shaft milling cutter S514-1TM is an indexable-insert cutter body engineered for versatile face and slot milling in production and jobbing environments, offering coolant-through capability for improved tool life and stable cutting. 32 mm cutting diameter Internal coolant for improved chip removal Compatible with R390 17 Sandvik inserts 25 mm precision shank, 3 cutting edges Consistent metal removal for repetitive production Designed for reliable material removal, this indexable milling cutter delivers stable cutting with a 32 mm diameter and three cutting edges, which balance cutting force and surface finish. The configuration reduces vibration in medium-depth passes and supports repeatable part tolerances, making it suitable for batch production where process stability is essential. The cutter body construction ensures concentricity on the 25 mm shank, facilitating secure clamping in standard toolholders and minimising runout-related rejects. Improved cooling and chip control for longer tool life The integrated internal coolant channel directs cutting fluid close to the cutting zone, improving lubrication and chip evacuation. This targeted coolant flow lowers cutting temperatures and reduces built-up edge on the insert, which translates into longer intervals between index changes and fewer unscheduled tool changes. For shops pursuing throughput gains, the coolant-through design supports higher average cutting speeds without compromising insert life. Broad compatibility and straightforward maintenance Compatibility with R390 17 inserts from Sandvik simplifies tooling inventories and enables fast reconditioning of cutting edges. The cutter uses a Torx T15 key and M3.5x8.5 Torx screws for secure insert retention, allowing quick insert replacement with commonly available hand tools. Clear configuration and standard fasteners reduce maintenance time and help keep machine uptime high in mixed-production shops. Practical choice for mixed-material applications With a compact overall length and a 25 mm shank dimension, the cutter suits machines with limited tool clearance while still providing 45 mm effective cutting length for many slotting and face-milling tasks. The tool body mass and geometry assist in damping chatter, which benefits surface quality when machining a range of steels and general workshop alloys. This makes the cutter a pragmatic option where versatility and reliable surface results are required. For reliable high-performance milling with internal coolant and proven insert compatibility, contact Metav Werkzeuge to order the Teknik Makina S514-1TM or discuss the best insert and holder combination with our product specialists. Technical data Article number: S514-1TM Manufacturer: Teknik Cutting Tools Product type: Shaft milling cutter (indexable insert cutter) Compatible inserts: R390 17 Compatible insert manufacturer: Sandvik Facts Diameter: 32 mm Overall length: 120 mm Shank diameter: 25 mm Cutting length: 45 mm Number of cutting edges: 3 Weight: 0.459 kg Special features Internal coolant (coolant-through) Torx key: T15 Torx screw: M3.5x8.5 Suitable for indexable-insert milling applications SKU: S514-1TM FAQ What inserts fit this cutter? The cutter accepts R390 17 indexable inserts; the S514-1TM is specified for the R390 17 geometry commonly supplied by Sandvik. Does the cutter support coolant-through operation? Yes — the S514-1TM features internal coolant channels that deliver fluid directly to the cutting zone for improved chip control. Which shank diameter is required in the holder? The tool has a 25 mm precision shank; a compatible 25 mm clamping system or collet holder is required for safe operation. How many cutting edges does the tool use and what is the benefit? The body is configured with three cutting edges; this provides a balance of material removal rate and surface finish while reducing cutting forces compared with higher-tooth counts. Which fasteners are needed for insert retention? Inserts are secured with M3.5x8.5 Torx screws; a T15 Torx key is used for tightening and replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm End Mill for TNKT 1105 Indexable Inserts With Internal Coolant, 130mm - Teknik Makina
Take advantage of the combination of 32 mm shank rigidity, internal coolant delivery and proven indexable-insert compatibility for reliable milling performance; order directly via Metav Werkzeuge or ask the consultants for application support. Shank milling cutter S057TM — 32 mm shank, internal coolant, for TNKT 1105 indexable inserts (Teknik Makina) Shank milling cutter S057TM engineered for indexable-insert milling with internal coolant, suitable for industrial machining setups where fast insert changes and secure clamping are required. 32 mm shank for rigid clamping Internal coolant supply for tool life Designed for TNKT 1105 inserts (Korloy compatible) Maximum rigidity and consistent chip control for production runs The design centres on a 32 mm shank, delivering high clamping stiffness that reduces vibration and improves surface consistency during interrupted or continuous milling. With three cutting edges and a defined 40 mm cutting length, the cutter balances metal removal rate with tool life: fewer index changes are required compared with smaller tools, which supports predictable cycle times and reduces machine downtime. The use of indexable inserts means lower running costs and quick restoration of edge geometry without regrinding. Targeted cooling at the cutting zone for longer service intervals An integrated internal coolant channel supplies coolant directly to the cutting zone, helping to control temperatures and evacuate chips from the insert pockets. This directed cooling reduces thermal wear on the insert seats and cutting edges, which in turn extends the interval between insert changes and maintenance. The cutter’s compatibility with TNKT 1105 indexable inserts (Korloy) allows selection of grades optimised for specific applications, while the internal coolant functionality supports consistent performance under demanding conditions. Practical handling and quick insert replacement to keep shops running The tool features a robust attachment system using a Torx T8 key and M3x7 Torx screw for each insert pocket, enabling repeatable clamping torque and straightforward insert replacement. With a 130 mm total length and a compact weight of 0.69 kg, the cutter is easy to handle during setup yet long enough for many standard machining fixtures. The combination of standardised fastening and indexable inserts ensures predictable assembly times and simple inventory management for spare parts. Contact Metav Werkzeuge for specific application advice on the Teknik Makina S057TM shank milling cutter and to arrange tailored supply options from our Emmerich centre. Technical data Article number: S057TM Manufacturer: Teknik Makina Product type: Shank milling cutter Suitable for inserts: TNKT 1105 (Korloy) Facts Shank diameter: 32 mm Total length: 130 mm Cutting length: 40 mm Number of cutting edges: 3 Weight: 0.69 kg Special features Internal coolant Torx key: T8 Torx screw: M3x7 FAQ Which inserts fit this cutter? The cutter accepts TNKT 1105 indexable inserts; the tool was specified for Korloy-compatible TNKT 1105 grades to provide a wide choice of carbide grades and coatings. Is the tool supplied with screws or a wrench? The tool uses an M3x7 Torx screw per pocket and a T8 Torx key is the required wrench; typical supply contents vary, so confirm with Metav Werkzeuge when ordering. How does internal coolant benefit everyday machining? Directed internal coolant reduces cutting temperatures and aids chip evacuation at the insert seat, improving edge life and lowering the frequency of insert replacements in continuous production. What are the key dimensions to check for fixture compatibility? Important dimensions are the 32 mm shank diameter, 130 mm total length and 40 mm cutting length; these determine clamping requirements and reach in most standard fixtures. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm End Mill For VCGT 1604 Indexable Inserts, 2 Flute 60mm Cutting Length, M4x10 Torx - Teknik Makina
Take advantage of the combination of rigid clamping, long cutting reach and proven insert compatibility to maintain consistent productivity on series milling tasks; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Teknik Makina S712TM Shaft Milling Cutter — 32 mm shank, for VCGT 1604 indexable inserts The S712TM shaft milling cutter is a purpose-built milling tool for industrial slotting and shoulder milling where repeatable accuracy and simple indexable-insert handling are required. 32 mm shank diameter for rigid clamping Accepts VCGT 1604 indexable inserts 60 mm solid cutting length Two cutting edges for balanced cuts M4x10 Torx screw with T15 key Consistent cutting performance for series production Designed for stable metal removal, this shaft cutter offers a 32 mm shank and 60 mm cutting length to extend reach without compromising rigidity. The robust shank diameter reduces vibration and improves surface finish when machining shoulders or light slotting operations, which translates into fewer rework cycles and higher first-pass yield. The tool’s geometry with two cutting edges delivers a balanced cut pattern that helps maintain consistent tool life and repeatability on batch runs. Quick insert changes and secure clamping The tool accepts VCGT 1604 indexable inserts, enabling rapid replacement and flexible choice of grades for different workpiece materials. Clamping is secured with an M4x10 Torx screw tightened using a T15 key, providing a compact and reliable fastening solution that reduces downtime during tool changes. For managers planning production, replacing inserts is a short, safe operation, so machine availability is maximised while maintaining cutting stability. Suitable for workshop and light industrial use With an overall length of 150 mm and a weight of 0.852 kg, the cutter is designed to integrate smoothly into standard milling set-ups without requiring special adapters. The combination of modest mass and a 32 mm diameter means good compatibility with common toolholders while preserving the stiffness needed for repeatable geometric results. The tool’s specification supports use in operations where controlled metal removal and surface integrity are priorities. Practical benefits and handling guidance Using indexable inserts reduces tooling inventory costs and simplifies tool management: different grades can be deployed depending on whether the task demands wear resistance or improved surface finish. The cutter’s straightforward fastening system and clear dimensional data make set-up predictable; training for fitters and operators is minimal, so process changeover remains efficient and documented. For enquiries about suitable insert grades or clamping parameters, technical consultation is available. For assured workshop precision and tailored application support, contact Metav Werkzeuge for guidance on integrating the Teknik Cutting Tools S712TM shaft milling cutter into production—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S712TM Manufacturer: Teknik Makina Designation: Shaft milling cutter for VCGT 1604 indexable inserts SKU: S712TM Facts Shank diameter: 32 mm Cutting length: 60 mm Overall length: 150 mm Number of cutting edges: 2 Weight: 0.852 kg Special features Compatible inserts: VCGT 1604 Torx screw: M4x10 Torx key size: T15 Diameter: 32 mm FAQ What insert type is specified for this cutter? The cutter is specified for VCGT 1604 indexable inserts and is configured to accept industry-standard insert sizes for flexible grade selection. How is the insert secured in the cutter? Insert clamping is achieved with an M4x10 Torx screw; the required key size is T15, ensuring reliable fastening and straightforward replacement. What are the key dimensions for machine setup? Key dimensions include a 32 mm shank diameter, 60 mm cutting length and an overall length of 150 mm, which support compatible toolholder selection and reach planning. Is the tool suitable for high-speed milling? The S712TM is optimised for stable, repeatable cuts; suitable insert grade and machine parameters should be selected to match required cutting speeds and material specifics. Can the cutter be used for shoulder milling and slotting? Yes, the geometry and two cutting edges provide balanced performance for both shoulder milling and light slotting tasks in series production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32mm End Mill For XOMX 1204 Indexable Inserts 4 Flutes 55mm Cutting Length, 90° - Teknik Makina
Take advantage of the combination of stable clamping, high material removal and reliable indexable insert compatibility for efficient, repeatable milling results. Order the tool through Metav Werkzeuge or consult their specialists for the correct holder and insert pairing. Indexable Shank Milling Cutter S648TM — 32 mm shank, 4 cutting edges (Teknik Makina) A Indexable Shank Milling Cutter S648TM designed for precision face and peripheral milling with XOMX 0602–1204 indexable inserts in industrial machining environments 32 mm shank for stable clamping 4 cutting edges for efficient material removal Compatible with SECO XOMX 0602–1204 inserts 90° cutting angle for square shoulder milling Improved throughput with controlled cutting performance The cutter body delivers repeatable removal rates by combining a 32 mm shank with four cutting edges, which reduces vibration and increases tool life compared with smaller, less rigid tools. Fitted with XOMX-format indexable plates, the system allows rapid edge changes and consistent surface finishes; the XOMX 0602–1204 insert format is widely supported, facilitating procurement and inventory management. The robust geometry and 90° cutting angle make this cutter particularly effective for shoulder milling and for operations where true perpendicular faces are required, helping to shorten cycle times and improve part accuracy. Secure clamping and straightforward servicing for less downtime Rigidity is provided by the substantial shank diameter and a simple fastener system that uses a Torx M3.5x8.5 screw and a T10 key for insert retention. This combination ensures secure seating of the indexable plates and quick, repeatable insert changes, lowering maintenance times on the shopfloor. The cutter’s overall length and cutting length proportions are optimised for common toolholder arrangements to maintain concentricity and minimise run-out. Clear mechanical design reduces the need for frequent rework and supports steady production throughput in small-batch and series production alike. Versatile application range and practical workshop benefits Engineered for use with SECO-standard inserts and built to industry expectations, this milling solution supports a range of machining tasks where robust, indexable tooling is preferred. The tool’s balance of 32 mm shaft diameter, 55 mm cutting length and a compact 150 mm overall length offers a good compromise between reach and stability. For shops seeking dependable indexable tooling that integrates with existing holders and inserts, the S648TM provides compatibility and predictability. Choosing this cutter helps simplify tooling lists and supports leaner setup procedures, contributing to measurable process reliability. Discuss tool selection and holder‑insert configuration with Metav Werkzeuge to ensure optimal use of the Teknik Makina S648TM — Metav Werkzeuge provides expert advice and reliable supply from Emmerich to the workshop Technical data Article number: S648TM Type: Indexable shank milling cutter For inserts: XOMX 0602–1204 Indexable Inserts Manufacturer: Teknik Makina Numbers / Core technical data Shank diameter: 32 mm Cutting length: 55 mm Overall length: 150 mm Number of cutting edges: 4 Weight: 0.937 kg Cutting angle: 90° Diameter: 32 mm Torx screw: M3.5x8.5 Torx key: T10 Special features Compatible with SECO insert standards Designed for XOMX 1204 indexable plates Rapid indexable insert replacement Suitable for face and shoulder milling applications FAQ Which insert format is required for this cutter? The cutter is designed for XOMX 0602–1204 indexable inserts; XOMX 1204 plates are supported for this body. Is this tool compatible with SECO inserts? Yes, the design specifies compatibility with SECO‑type inserts and the cutter accepts standard XOMX plates. What clamping hardware is used for the inserts? Insert retention uses a Torx M3.5x8.5 screw tightened with a T10 key for secure and repeatable clamping. What machining tasks suit this cutter best? With a 90° cutting angle and four edges, the tool is well suited for square-shoulder milling and general face/peripheral milling where rigidity and repeatability are priorities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Face Mill For BDMT 1704 Indexable Inserts 3 Flutes 60mm Cutting Length, 90° - Teknik Makina
Take advantage of a compact, stable design that combines precise indexing, a generous 60 mm cutting length and compatibility with BDMT 1704 inserts to keep machining cycles efficient and predictable; order directly via Metav Werkzeuge or consult the technical advisors if clarification is required. Shank milling cutter S582TM – Ø32 mm, 3 cutting edges, for BDMT 1704 indexable inserts by Teknik Makina The Shank milling cutter S582TM is a purpose-built indexable-insert tool for medium-duty milling tasks, designed to accept BDMT 1704 inserts and provide stable, repeatable cutting performance in production and jobbing environments. Ø32 mm shank for stable cutting 3 cutting edges for balanced material removal 60 mm cutting length for deeper passes Compatible with BDMT 1704 inserts (Kyocera) Consistent cutting performance for predictable cycle times The S582TM is engineered around a robust 32 mm shank and 3 cutting edges, which together deliver improved rigidity and a steady cutting rhythm. The 90° cutting angle provides a controlled engagement with the workpiece, reducing deflection during shoulder and face milling. Measured attributes such as a 60 mm cutting length and 150 mm overall length balance reach with stability, allowing longer passes without sacrificing surface quality. For production planners, this translates into fewer tool changes and more uniform part-to-part accuracy, supporting tighter process control on the shop floor. Serviceability and quick insert changes to reduce downtime Maintenance and indexable-insert replacement are simplified by the standard Torx fixing: the tool uses an M4x10 Torx screw secured with a T15 key, enabling fast, secure insert clamping with conventional workshop tooling. The insert pocket accepts BDMT 1704 indexable inserts, which are widely stocked and, in this configuration, listed as compatible with Kyocera manufacture. The design minimises fiddly adjustments and keeps changeover time predictable — a practical advantage for mixed-batch production where fast tool swaps preserve machine availability. Integration into indexable-insert tool systems for flexible machining As an insert-based cutter, this shank tool works within the broader ecosystem of indexable tooling: insert geometry, grade and clamping practice define the cutting result as much as the tool body. The S582TM’s specifications — 32 mm diameter, 3 cutting edges and a weight of 0.895 kg — provide a clear basis for process planning and spindle load calculations. Using standard BDMT 1704 inserts enables quick adaptation to different materials by selecting appropriate grades and geometries without changing the toolholder. This modular approach supports lean inventory strategies and rapid response to varied production requirements. Contact Metav Werkzeuge for tailored guidance on integrating the Teknik Cutting Tools S582TM into the workshop setup and benefit from fast, reliable supply from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S582TM Manufacturer: Teknik Makina Designation: Shank milling cutter for BDMT 1704 indexable inserts Secondary designation (EN): for BDMT 1704 Indexable Inserts ECLASS: 21180806 ETIM: EC011860 Facts Shank diameter: 32 mm Cutting length: 60 mm Overall length: 150 mm Diameter: 32 mm Cutting edges: 3 Weight: 0.895 kg Special features Compatible with BDMT 1704 indexable inserts Compatible insert manufacturer: Kyocera Cutting angle: 90° Torx screw: M4x10 Torx key size: T15 Files: 62de7e560f56dbb4de4dbf0d, 62de7ee9148ec6b71020ffc7 FAQ Which inserts fit this shank cutter? The S582TM accepts BDMT 1704 indexable inserts; the tool body and pocket geometry are matched for that insert form and compatible grades, including those offered by Kyocera. How is the insert secured and which tool is required? Inserts for the S582TM are clamped with an M4x10 Torx screw; a T15 Torx key is specified for secure and repeatable fastening. What are the key dimensions to consider for fixture planning? Fixture and tool-holder planning should reference the 32 mm shank diameter, 60 mm cutting length and 150 mm overall length to ensure sufficient clearance and rigidity. Is the cutter suitable for long stepovers and deep cuts? The combination of a 32 mm shank and three cutting edges gives the S582TM a stable platform for extended passes; actual cutting parameters depend on insert grade and machine capability. How heavy is the tool for spindle balancing? The S582TM has a mass of 0.895 kg, which can be used as a reference when checking spindle balance and load calculations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Milling Cutter For ADMT 1204 Indexable Inserts 4 Teeth 50mm Cutting Length, 90° - Teknik Makina
Take advantage of the combination of precise clamping, a rigid 32 mm shank and easy insert replacement for reliable milling cycles and reduced downtime; order via Metav Werkzeuge or consult the technical team for application support. Teknik Makina Shank Milling Cutter S504TM — 32 mm diameter, 4-cutting-edge indexable-insert cutter Teknik Makina Shank Milling Cutter S504TM is designed for heavy-duty shank-mounted milling with ADMT 1204 indexable inserts, offering square‑shoulder capability and a compact overall length for machine clearance 32 mm diameter, rigid shank 4 cutting edges for balanced cutting Compatible with ADMT 1204 indexable inserts Torx screw M3×7 and T8 key specification Faster, more consistent material removal with fewer tool changes The S504TM is a shank-mounted milling cutter engineered to work with ADMT 1204 indexable inserts, providing efficient chip formation while keeping change‑over simple. The combination of a 32 mm diameter and 4 cutting edges creates a stabilised cutting process that reduces vibration and supports consistent surface quality. With a 90° cutting angle, the cutter is suitable for operations that require true square shoulders, meaning fewer finishing passes are needed and cycle times are reduced. The modular insert system also makes edge changes quick and repeatable, lowering toolroom downtime without complex maintenance. Robust clamping and straightforward serviceability for production environments A rigid shank diameter of 32 mm and a compact 150 mm overall length deliver high stiffness at the cutting zone, improving dimensional stability during heavy cuts. Fastening is secured with a Torx screw M3x7, tightened with a T8 key, which ensures repeatable clamp force and simple servicing on the shop floor. The cutter’s mass—approximately 0.932 kg—strikes a balance between rigidity and handling, aiding spindle dynamics while remaining straightforward to mount. Because the tool accepts standard ADMT 1204 inserts (as supplied by Walter), procurement and stocking are simplified. Clear setup and application advantages for daily machining tasks With a 50 mm cutting length and a design tailored to indexable-insert use, the tool is well suited to face and shoulder milling tasks where accurate right‑angled cuts are required. The use of replaceable inserts keeps the body service life long and allows for quick reconditioning of cutting geometry by swapping worn inserts rather than replacing the entire tool. The cutter’s geometry supports predictable toolpaths and reliable tolerances in routine production; for specialised materials or bespoke programmes, consult the technical advisers at Metav Werkzeuge to align insert grade and cutting data with the intended workpiece. Contact Metav Werkzeuge for tailored application advice and procurement from our Emmerich distribution centre; technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 to assist with selection and compatibility of the Teknik Makina S504TM Technical data Article number: S504TM Manufacturer: Teknik Makina Designation: Shank milling cutter for ADMT 1204 indexable inserts Brand SKU: S504TM Facts Cutting diameter: 32 mm Shank diameter: 32 mm Cutting length: 50 mm Overall length: 150 mm Number of cutting edges: 4 Weight: 0.932 kg Cutting angle: 90° Special features Compatible with ADMT 1204 indexable inserts Compatible insert manufacturer: Walter Torx screw: M3x7 Torx key size: T8 FAQ Which inserts fit this cutter? The cutter accepts ADMT 1204 indexable inserts; compatibility was specified for ADMT 1204 and is standard for the Teknik Makina S504TM. Is the S504TM suitable for square‑shoulder milling? Yes, the 90° cutting angle and the 32 mm diameter provide the geometry required for accurate square shoulders in general milling operations. What fastening hardware is required for insert clamping? Insert clamping on the S504TM is retained by a Torx screw M3x7; a T8 key is used to secure or replace the inserts. How long is the cutting zone and how does that affect setup? The tool offers a 50 mm cutting length, providing a clear working area for shoulder and face milling without excessive overhang, which helps maintain rigidity during setup. Can standard Walter inserts be used directly? Yes, the cutter is specified as compatible with inserts from Walter that meet the ADMT 1204 designation, simplifying procurement and stock management. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32mm Milling Cutter for RPMW 10T3 Indexable Inserts, 4 Flutes, 25mm Shank - Teknik Makina
Take advantage of a compact holder that combines precise insert compatibility and robust clamping for efficient milling operations; the tool delivers consistent results with a 32 mm cutting diameter and a secure 25 mm shank. Order the tool directly via Metav Werkzeuge or ask their consultants for processing recommendations. Shank milling cutter R320TM by Teknik Makina — 32 mm diameter, for RPMW 10T3 The Shank milling cutter R320TM is a purpose-built toolholder for indexable RPMW 10T3 inserts, designed to provide stable, repeatable performance in general milling applications. Compatible with RPMW 10T3 Korloy inserts Solid 25 mm shank for secure clamping 32 mm cutting diameter for versatile milling Securing screw M3.5x8.5, Torx T15 interface Consistent process results through measured geometry and indexable compatibility The R320TM holder pairs a controlled cutter geometry with standard indexable inserts to deliver repeatable machining. The tool accepts RPMW 10T3 inserts, a common form factor that simplifies tool procurement and reduces set‑up variance. With a 32 mm diameter and 4 cutting edges, the design spreads cutting forces across several teeth, which lowers vibration and improves surface finish. For production planning, that means fewer interruptions for regrinding and a steadier cycle time, translating into measurable throughput gains on typical milling tasks. Secure clamping and simple serviceability reduce downtime A robust 25 mm shank ensures rigid clamping in conventional toolholders and minimises runout at the spindle nose, while the dedicated securing screw specification (M3.5x8.5, Torx T15) defines a clear maintenance procedure. The retention method is straightforward: the specified Torx drive provides a reliable torque interface for repeatable insert fixation without complex fixtures. This configuration shortens maintenance intervals and supports predictable tool life, which is particularly valuable in mixed‑batch production or when using the tool across several machines. Compatibility that supports flexible application planning By accepting Korloy‑compatible RPMW 10T3 inserts, the holder integrates into existing tooling stocks and cutter systems without the need for bespoke inserts. The overall length of 200 mm gives adequate reach for many setups while maintaining stability during side‑cutting or face‑milling operations. The combination of standard insert format, clear screw and key dimensions and a sturdy shank enables straightforward tool management in workshop environments and helps to harmonise inventories across production lines. For procurement advice or to secure the R320TM shank milling cutter from Teknik Cutting Tools, contact Metav Werkzeuge in Emmerich for fast, reliable supply and expert application support. Technical data Article number: R320TM Manufacturer: Teknik Makina Brand SKU: R320TM Eclass: 21180806 ETIM: EC011860 Core specifications Cutting diameter: 32 mm Shank diameter: 25 mm Overall length: 200 mm Number of cutting edges: 4 Features & compatibility For indexable inserts: RPMW 10T3 Compatible insert manufacturer: Korloy Securing screw: M3.5x8.5 Torx key size: T15 Tool type: Shank milling cutter / holder FAQ What insert type does the holder accept? The R320TM accepts RPMW 10T3 indexable inserts; this is the specified insert form for the holder and enables use of standard Korloy grades. What are the key dimensions to check for machine compatibility? Check the 25 mm shank diameter, the 200 mm overall length, and the required toolholder interface; these dimensions determine secure mounting and adequate reach. Which screw and driver are required to fit inserts? The holder uses a securing screw sized M3.5x8.5 with a Torx T15 drive for insert clamping and maintenance. Is the tool suitable for face milling and side milling? Yes, the combination of a 32 mm cutting diameter and four cutting edges makes the holder suitable for both face and light side‑milling operations in a wide range of workshop tasks. Can the R320TM be used with inserts from other manufacturers? Compatibility is defined by the RPMW 10T3 form; any insert matching that geometry and clamping style should fit, though Korloy grades are the specified matching manufacturer. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Milling Cutter For XNKT 0604 Indexable Inserts 4 Flutes, 90° Cutting Angle - Teknik Makina
Take advantage of the combination of robust clamping, precise indexable-insert compatibility and compact overall length for uninterrupted milling operations. Order the shank cutter directly via Metav Werkzeuge or consult our specialists for application-specific setup and insert recommendations. Teknik Makina S841TM shank cutter – Ø32 mm, for XNKT 0604 indexable inserts The S841TM shank cutter is an indexable-insert milling tool designed for secure, repeatable machining with XNKT 0604 inserts; ideal where rigidity and fast insert changes matter Ø32 mm shank diameter 40 mm cutting length Compatible with XNKT 0604 inserts Torx screw M3x7, key T8 Consistent chip control and predictable cutting results The S841TM is engineered for milling with indexable inserts, using four cutting edges to maintain stable engagement and predictable chip formation. By accepting XNKT 0604 inserts from Korloy, the tool enables quick index changes and reduced tool handling time. The 90° cutting angle supports square shoulders and effective face milling, while the indexable system separates cutting material from the holder so wear is limited to the replaceable inserts, lowering ongoing tooling costs and simplifying inventory. Rigid shank and compact geometry for vibration-free performance A 32 mm shank diameter and a 150 mm overall length give the holder a compact, rigid footprint that minimises deflection during cutting. The 40 mm effective cutting length balances reach with stiffness, helping to maintain surface finish and dimensional accuracy. Secure clamping is ensured via the Torx M3x7 fastening screw with T8 key, which provides consistent insert seating and repeatable positioning—reducing set-up time and the need for frequent re-torque checks. Designed for flexible milling workflows and fast reconditioning As an indexable-insert holder, the cutter is intended for use across standard milling operations when paired with the appropriate insert geometry and grade. The replaceable nature of the inserts makes the system versatile: a single holder can serve multiple jobs simply by selecting inserts optimised for roughing or finishing. Application parameters such as feed, depth of cut and insert grade should be chosen to match the workpiece material; Metav Werkzeuge can advise on insert selection and cutting data to suit specific tasks. Low-maintenance handling and predictable service routines Maintenance is straightforward: change worn inserts, inspect the seat for chips and secure the Torx screw to the specified torque. The modular design reduces downtime because failures are typically limited to the insert rather than the holder. The compact weight and balanced configuration also make the product easy to handle and integrate into existing tool assemblies, contributing to smoother tool exchanges and fewer interruptions on the shopfloor. For a practical upgrade to indexable-insert milling, contact Metav Werkzeuge to discuss the S841TM and obtain recommended Korloy inserts for intended applications; Metav’s specialists will advise on optimal setup and procurement. Technical Data Article number: S841TM Manufacturer: Teknik Makina Facts Shank diameter: 32 mm Cutting length: 40 mm Number of cutting edges: 4 Overall length: 150 mm Weight: 0.941 kg Cutting angle: 90° Diameter: 32 mm Special features Compatible inserts: XNKT 0604 Compatible insert manufacturer: Korloy Torx screw: M3x7, key T8 Indexable-insert holder design FAQ Which inserts fit this cutter? The holder accepts XNKT 0604 indexable inserts; for the S841TM by Teknik Makina, choose the appropriate Korloy grade and geometry for the required finish and material. What is the shank diameter and overall length? The S841TM shank cutter has a 32 mm shank diameter and an overall length of 150 mm, providing a compact and rigid solution for many milling setups. How many cutting edges does the tool provide? This indexable holder uses 4 cutting edges (one per insert position) when fitted with the corresponding XNKT 0604 inserts for balanced engagement. What fastening hardware is required for insert clamping? Insert clamping uses a Torx M3x7 screw tightened with a T8 key; consistent torque ensures correct insert seating and repeatable positioning for the S841TM. Can the holder be reconditioned or repaired? Wear is typically confined to the replaceable inserts; the S841TM holder should be inspected for seat damage and cleaned when inserts are changed to maintain repeatable performance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Schaftfräser BLMP 0904 L150mm Innenkühlung, 4 Schneiden - Teknik Makina
Schaftfräser – für BLMP 0904 Wendeplatten Der Schaftfräser ist ein modularer Fräskörper zur Aufnahme von BLMP 0904 Wendeplatten und wurde für effiziente Planfräs- und Schruppbearbeitungen in der Serienfertigung konzipiert 32 mm Schaftdurchmesser für stabile Spannbedingungen Innenkühlung für bessere Kühlung und Spanabfuhr 4 Schneiden für hohe Zerspanleistung Schaftlänge 150 mm, Schneidenlänge 40 mm Passend für Taegutec BLMP 0904 Wendeplatten Effizienz und Präzision für Serienfertigung Der Fräskörper überzeugt durch die Aufnahme von BLMP 0904 Indexierbaren Platten und ist ausdrücklich kompatibel mit Taegutec-Platten, was Rüstzeiten deutlich reduziert. Mit einem Schaftdurchmesser 32 mm und vier Schneiden lässt sich ein gleichmäßiger Schnittaufwand erzielen, wodurch Prozessstabilität und Oberflächenqualität steigen. Die modulare Schneidenaufnahme ermöglicht schnellen Plattenwechsel ohne aufwändige Nachjustage, was insbesondere bei wiederkehrenden Losgrößen zu spürbarer Produktivitätssteigerung führt. Robuste Schnittstelle und sichere Befestigung Die Montage der Wendeplatten erfolgt mit einer Torx Schraube M3,5x8,5, gesichert über den Torx Schlüssel T10, was eine reproduzierbare Vorspannung und einfache Wartung sicherstellt. Der Schaft mit einer Gesamtlänge von 150 mm bietet ausreichend Zugänglichkeit bei gleichzeitiger Steifigkeit, während die effektive Schneidenlänge von 40 mm praktikable Eingriffstiefen erlaubt. Diese Kombination aus stabiler Schnittstelle und praxisgerechtem Abmessungsprofil erleichtert das Einspannen und minimiert Schwingungen im Bearbeitungsprozess. Längere Standzeit durch kontrollierte Kühlung Die integrierte Innenkühlung erhöht die Werkzeugstandzeit, indem Kühlmittel gezielt an die Schnittzone geführt wird und so Wärmebelastung und Aufbauschneiden reduziert werden. Das Ergebnis ist eine geringere Werkzeugabriebrate und konstantere Bearbeitungsqualität über längere Laufzeiten. Durch die verbesserte Spanabfuhr sinkt zudem die Wahrscheinlichkeit von Nacharbeit und Maschinenstillstand, was die Wirtschaftlichkeit in der Fertigung erhöht. Empfehlung: Für präzise und produktive Fräsprozesse mit BLMP 0904 Wendeplatten empfiehlt sich dieses Werkzeug von Teknik Makina; technische Beratung und Belieferung erfolgen zuverlässig durch Metav Werkzeuge, erreichbar unter info@metav-werkzeuge.com oder +49 2822 7131930 Produktmerkmale Artikelnummer: S491TM Marke: Teknik Makina Bezeichnung: Schaftfräser für BLMP 0904 Wendeplatten Fakten Durchmesser: 32 mm Gesamtlänge: 150 mm Schaftdurchmesser: 32 mm Schaftlänge Schneide: 40 mm Schneiden: 4 Gewicht: 0.912 kg Besonderheiten Innenkühlung Passend für Wendeplatten: BLMP 0904 Passend für Hersteller: Taegutec Torx Schlüssel: T10 (Schraubenschlüsselgröße) Torx Schraube: M3,5x8,5 (Befestigungsschraube) FAQ Wie sichere ich die Wendeplatten korrekt? Die Wendeplatten werden mit der Torx Schraube M3,5x8,5 montiert und mit dem Torx Schlüssel T10 angezogen, wodurch eine reproduzierbare Vorspannung für den Schaftfräser von Teknik Makina ermöglicht wird. Ist das Werkzeug für Taegutec BLMP 0904 Platten geeignet? Ja, der Schaftfräser ist speziell für BLMP 0904 Indexierbare Platten ausgelegt und kompatibel mit Taegutec-Platten, was einfachen Plattenwechsel und standardisierte Ersatzteilbeschaffung gewährleistet. Welche Vorteile bietet die Innenkühlung in der Praxis? Die Innenkühlung reduziert die thermische Belastung an der Schneide, verbessert die Spanabfuhr und verlängert dadurch die Standzeit des Fräsers deutlich, was Ausfallzeiten und Nacharbeit minimiert. Welche Abmessungen sind für die Spannvorrichtung relevant? Wesentliche Abmessungen sind der Schaftdurchmesser 32 mm und die Schaftlänge 150 mm; diese Werte bestimmen die Einspannbarkeit und die erreichbare Steifigkeit im Spannmittelsystem. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
High-performance shank cutters and ball nose cutters for efficient milling
Insert shank cutters and ball nose cutters combine flexibility and productivity for a wide range of milling tasks. The category covers steel-bodied shank cutters fitted with indexable inserts for economical roughing, face milling, cornering and slotting, as well as ball nose cutters for contouring and 3D finishing.
How these tools work and where they belong
Shank cutters with indexable inserts use a carrier body made from hardened steel; the cutting edges are provided by removable inserts rather than a solid tool blank. Where tools do not have internal coolant, process heat and chips are managed via external coolant nozzles or compressed air, which is sufficient for open, surface-level and easily accessible milling on standard materials. Shank cutters with internal coolant feature fine internal channels that deliver coolant or blasting air directly to each cutting edge under pressure. This targeted supply is essential for deep pockets, cavities, full slotting and machining of heat-resistant or difficult-to-machine materials, because it prevents chip re-cutting, protects cutting edges from thermal overload and enables higher feed rates and improved surface quality.
Cut cycle times and reduce tooling costs
- Replaceable indexable inserts reduce consumable costs and shorten tool change time.
- Targeted internal coolant improves chip evacuation and extends insert life.
- Robust steel carrier bodies enable heavy-duty roughing without frequent tool replacement.
- Suitable for roughing, planing, corner milling and slot milling as well as precision 3D profiling with ball nose cutters.
A practical choice for purchasing and stocking tools
Metav brings a pragmatic purchasing advantage: a broad range of milling solutions is available from a single European quality hub. Metav’s focus on democratising precision means workshops benefit from a wide assortment, consistent quality control from Emmerich and steady supply — supported by decades of expertise and over 48,000 satisfied customers. Choose Metav for a centralised sourcing strategy that reduces supplier complexity while keeping access to both insert milling cutters (also referred to as insert milling cutters or indexable end mills) and ball nose cutters (also known as ball nose end mills or radius cutters) straightforward.
Quick summary
Insert shank cutters and ball nose cutters deliver flexible, cost-effective milling: replaceable inserts lower running costs, and internal coolant options enable higher performance and longer tool life where chip control is critical.
FAQ
When should I choose a shank cutter with indexable inserts rather than a solid carbide end mill?
Choose shank cutters with indexable inserts for economical roughing and high-stock-removal tasks where replacing inserts is preferable to replacing an entire tool; they are especially effective for face milling, cornering and slotting operations.
Does internal coolant make a measurable difference for ball nose cutters?
Yes. Internal coolant directed to each cutting edge reduces chip re-cutting and thermal stress, which improves surface finish and increases insert life when machining deep pockets, cavities or heat-resistant materials.
Can shank cutters without internal coolant be used for general workshop milling?
Absolutely. Tools without internal coolant rely on external coolant nozzles or compressed air and are well suited to open, superficial and easily accessible milling on standard materials.
What milling operations are shank cutters for indexable inserts typically used for?
Shank cutters with indexable inserts excel at economical roughing, planfräsen (face milling), corner milling and slot milling; ball nose cutters are the preferred choice for 3D profiling and finishing operations.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com