Efficient shaft cutters and ball nose cutters for versatile milling
Shaft cutters and ball nose cutters serve as robust rotating tools for roughing, face milling, corner milling and slotting, offering economical replacement of indexable inserts rather than whole solid tools. Available in versions with internal coolant to feed lubricant directly to each cutting edge or without internal coolant relying on external nozzles, these cutters ensure effective chip evacuation and thermal control suited to standard materials or deep pocket and cavity work. By preventing chip re-cutting and protecting cutting edges, they deliver higher feed rates, improved surface finish and extended tool life in demanding metalworking applications.
32mm Schaftfräser Für XNKT 0805 Wendeplatten L125mm Mit Innenkühlung, Torx M4x10 Schraube - Teknik Makina
Schaftfräser — Schaftfräser für XNKT 0805 Wendeplatten Der Schaftfräser für XNKT 0805 Wendeplatten bietet eine robuste Lösung für Präzisionsfräsen mit integrierter Innenkühlung und hoher Laufruhe 32 mm Durchmesser für stabile Bearbeitung Innenkühlung für sichere Spanabfuhr Passend für Korloy XNKT 0805 Wendeplatten 3 Schneiden für ruhigen Lauf und Standzeit Torx Schraube M4x10 mit Torx Schlüssel T15 Präzise Konstruktion für gleichbleibende Ergebnisse Der Fräser zeichnet sich durch eine kompakte Bauform und eine präzise Schaftaufnahme aus, die Vibrationen reduziert und die Oberflächenqualität verbessert. Mit einem Durchmesser von 32 mm und einer Gesamtlänge von 125 mm sorgt das Werkzeug für stabile Schnittbedingungen, selbst bei mittleren bis anspruchsvollen Bearbeitungsaufgaben. Die Auslegung auf drei Schneiden minimiert den Rundlauf und erhöht die Standzeit, was zu planbaren Produktionszyklen führt. Innenkühlung für bessere Spanabfuhr und Prozesssicherheit Die integrierte Innenkühlung führt das Kühlmittel direkt zur Schneidezone und verbessert dadurch die Spanabfuhr sowie die Wärmeabfuhr an kritischen Stellen. Durch die Kühlmittelzufuhr an der Schnittstelle sinkt die Hitzeentwicklung, was die Standzeit der Wendeplatten verlängert und Nachbearbeitungen reduziert. Anwender profitieren von konstanteren Schnittbedingungen und geringerer Belastung für Werkzeughalter und Maschine. Kompatibilität und einfache Montage Das Werkzeug ist speziell ausgelegt für XNKT 0805 Wendeplatten und wurde für die Verwendung mit Wendeplatten des Herstellers Korloy abgestimmt. Die Befestigung erfolgt über eine Torx Schraube M4x10; zum Anziehen wird ein Torx Schlüssel T15 verwendet. Diese Kombination garantiert eine sichere Fixierung der Wendeplatte und einfache Wechselvorgänge im Fertigungsablauf, was die Rüstzeiten reduziert. Einsatzfelder und wirtschaftlicher Nutzen Der Schaftfräser eignet sich für vielseitige Fräsoperationen in der Metallbearbeitung, insbesondere für Kontur‑ und Planfräsen mit Indexplatten. Durch die Kombination aus Innenkühlung, drei Schneiden und stabiler Schaftaufnahme ermöglicht das Werkzeug konstante Bearbeitungsqualität und längere Standzeiten. Das reduziert Werkzeugkosten pro Bauteil und trägt zur Effizienzsteigerung in kleinen und mittleren Serien bei. Empfehlung: Der Schaftfräser von Teknik Makina ist ideal für Maschineneinsätze, die stabile Schnittbedingungen und kompatible Korloy XNKT 0805 Wendeplatten erfordern — bei Fragen oder für Bestellhilfe bitte Kontakt aufnehmen per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produkteigenschaften Artikelnummer: S843-1TM Marke: Teknik Makina Bezeichnung: Schaftfräser für XNKT 0805 Wendeplatten Produktart: Schaftfräser Daten Durchmesser: 32 mm Gesamtlänge: 125 mm Schaftdurchmesser: 32 mm Schaftlänge Schneide: 37 mm Schneiden: 3 Gewicht: 0.817 kg Besonderheiten Innenkühlung: ja, kühlmittelgeführt Passend für Wendeplatten-Hersteller: Korloy Wendeplatten-Typ: XNKT 0805 Torx Schlüssel: T15 (zum Anziehen der Schraube) Torx Schraube: M4x10 FAQ Ist der Fräser mit Korloy Wendeplatten kompatibel? Der Schaftfräser S843-1TM ist geeignet für XNKT 0805 Wendeplatten und wurde explizit auf Kompatibilität mit Korloy Wendeplatten ausgelegt, sodass ein sicherer Sitz und optimale Spanbildung gewährleistet sind. Wie unterstützt die Innenkühlung die Bearbeitung? Die Innenkühlung des Schaftfräsers leitet Kühlmittel direkt zur Schnittzone, verbessert die Spanabfuhr und reduziert Wärmeeintrag an der Schneide, was die Standzeit der XNKT 0805 Wendeplatten erhöht. Welche Befestigung wird genutzt und welches Werkzeug wird benötigt? Die Wendeplattenfixierung erfolgt mit einer Torx Schraube M4x10; zum Anziehen und Lösen wird ein Torx Schlüssel T15 verwendet, was schnellen und sicheren Wechsel ermöglicht. Für welche Bearbeitungsaufgaben ist der Fräser besonders geeignet? Der Schaftfräser von Teknik Makina eignet sich für Kontur‑ und Planfräsen mit Indexplatten und bietet dank drei Schneiden und stabiler Schaftaufnahme eine gute Option für mittlere Serien und präzise Aufgaben. Wie viele Schneiden hat der Fräser und welchen Vorteil bringt das? Der Fräser verfügt über drei Schneiden, was den Lauf ruhig hält und gleichmäßige Schnittkräfte erzeugt; das trägt zu konstanter Oberflächenqualität und längeren Standzeiten bei. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Cutter for ANHX 1004-1206 Indexable Inserts, 3 Cutting Edges 90° - Teknik Makina
Take advantage of a robust combination of high rigidity and quick insert changes: the tool’s 32 mm shank and 35 mm cutting length deliver stable shoulder milling with indexable inserts, while compatibility with ANHX 1004–1206 inserts keeps running costs low. Order this milling cutter directly via Metav Werkzeuge or request advice from the on-site consultants. Schaftfräser S765TM — insert milling cutter with Ø32 mm shank, compatible with ANHX 1004–1206 (Teknik Makina) The Schaftfräser S765TM is an indexable milling cutter engineered for productive shoulder and face milling applications using ANHX series indexable inserts. 32 mm shank diameter 35 mm effective cutting length Compatible with ANHX 1206 inserts Torx screw M3.5×8.5; key size T10 Stable cutting performance for demanding milling The solid construction and 32 mm shank provide high radial stiffness, which reduces vibration and improves surface finish during heavy-duty operations. The tool’s three cutting edges and 90° cutting angle are especially suited to shoulder milling and slotting where chatter resistance and repeatable geometry matter. For procurement and workshop planning, the robust mass (approx. 0.922 kg) and 150 mm overall length make it straightforward to check for clearance and toolholder compatibility. Quick insert changes that reduce downtime Designed around the ANHX family of inserts, the cutter enables fast indexable changes without complex regrinding. The ANHX 1206 pocket accepts standard insert sizes, simplifying inventory and cutting data harmonisation across machines. The retention system uses a Torx screw M3.5×8.5 with a T10 key, allowing secure clamping with standard maintenance tools and minimising changeover time on the shop floor. Compatibility and mounting for reliable integration With a 32 mm shank diameter, the cutter is compatible with common toolholders and clamping systems used in production workshops and jobbing shops. The axial dimensions and 35 mm cutting length balance reach and rigidity; the geometry supports precise step milling and finishing passes when combined with suitable feeds and speeds. For customers standardising tooling, the cutter’s acceptance of ANHX inserts (1004–1206) aligns with Palbit insert ranges to simplify spare parts management. Procurement confidence and workshop support Sourced from Teknik Makina and supplied via Metav’s distribution channel, the tool benefits from dependable logistics and clear specification data for ordering and planning. Performance claims focus on measurable attributes — shank size, cutting length and insert compatibility — so purchasing decisions can be based on verifiable technical parameters rather than marketing hyperbole. For complex applications, matching insert grade and cutting data to the component material is recommended to obtain the expected tool life and process reliability. For procurement or detailed technical advice on the Teknik Cutting Tools S765TM insert milling cutter, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by telephone at +49 2822 7131930 for tailored supply and rapid delivery. Technical data SKU: S765TM Brand: Teknik Makina Facts Shank diameter: 32 mm Effective cutting length: 35 mm Total length: 150 mm Number of cutting edges: 3 Cutting angle: 90° Weight: 0.922 kg Special features Compatible inserts: ANHX 1206 Compatible insert range: ANHX 1004–1206 Torx screw: M3.5×8.5 Torx key size: T10 Compatible insert manufacturer: Palbit Application: Indexable milling cutter for shoulder/face milling FAQ Which inserts fit this cutter? The cutter accepts ANHX 1206 indexable inserts and supports the ANHX 1004–1206 range, allowing use of standard Palbit ANHX grades for common milling tasks. What is the shank diameter and is it compatible with standard holders? The tool features a 32 mm shank, suitable for common toolholders that accept Ø32 mm shanks; compatibility should be checked against the specific holder clamping length. How many cutting edges does the tool have and what is the cutting angle? The milling cutter is equipped with three cutting edges and a 90° cutting angle, optimised for stable shoulder milling and repetitive face passes. What fastening hardware is required for insert clamping? Insert clamping uses a Torx screw M3.5×8.5; the corresponding key size is T10 for secure and repeatable clamping. Is this tool supplied with inserts? The product is supplied as an indexable milling cutter compatible with ANHX inserts; inserts are ordered separately in accordance with process requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Cutter For APMT 11T3 Indexable Inserts, 4 Teeth, 50mm Cutting Length - Teknik Makina
Take advantage of a robust combination of stable clamping and fast insert changes: the solid 32 mm shank and four cutting edges ensure consistent performance, while compatibility with APMT 11T3 indexable inserts keeps tool management efficient. Order or request advice through Metav Werkzeuge for reliable delivery and technical guidance. Schaftfräser S242TM – Teknik Makina insert milling cutter for APMT 11T3, 32 mm shank The Schaftfräser S242TM is a shank milling cutter engineered for indexable-insert milling operations, optimising setup stability and changeover speed in production environments. Insert milling cutter for APMT 11T3 inserts 32 mm shank diameter for stable clamping Four cutting edges for efficient material removal Overall length 180 mm, cutting length 50 mm Stable clamping and consistent cutting for predictable results Built around a 32 mm shank, this insert milling cutter delivers enhanced rigidity and reduced vibration during machining, which translates to improved surface finish and longer insert life. The tool’s mass of 1.123 kg contributes to stable cutting dynamics without excessive spindle load, making it suitable for repeated face and peripheral milling cycles. With four cutting edges, chip load distribution is more even than single-edge alternatives, supporting steady material removal rates and predictable tool wear patterns. Fast insert changes that minimise downtime Compatibility with APMT 11T3 indexable inserts simplifies inventory and reduces set-up time. Insert retention is secured with an M2.5x5.5 Torx screw, operated with a T8 key, enabling rapid cartridge replacement and straightforward maintenance on the shop floor. The standardised fixing arrangement supports consistent seating of inserts and reliable repeatability after each change, helping to maintain production throughput and reduce unplanned stoppages. Designed for straightforward integration into milling operations The cutter’s 180 mm overall length and 50 mm cutting length provide a practical reach-to-stability ratio for many milling tasks, while a 90° cutting angle offers predictable engagement for angled and shoulder cuts. The tool is configured for use with recognised insert manufacturers such as Korloy, allowing straightforward sourcing of spare inserts. Its geometry and dimensions permit easy mounting in standard toolholders, so the component integrates quickly into existing tool setups without the need for special adaptors. Central supply and technical assurance from Metav Sourcing this industrial-grade milling solution through Metav brings logistical and technical benefits: a broad catalogue that simplifies procurement, a local warehousing presence that reduces lead times, and experienced advice to confirm fitment and application. For operations seeking reliable tooling with minimal administrative overhead, the combination of standardised inserts and a robust shank cutter supports efficient shop-floor routines and predictable production planning. Contact Metav Werkzeuge for tailored technical advice on the Teknik Cutting Tools S242TM shank cutter — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options Technical Data Article number: S242TM Manufacturer: Teknik Makina Description: Shank milling cutter for APMT 11T3 indexable inserts SKU: S242TM Facts Shank diameter: 32 mm Cutting length: 50 mm Overall length: 180 mm Weight: 1.123 kg Number of cutting edges: 4 Cutting angle: 90° Special features For APMT 11T3 indexable inserts Torx screw M2.5x5.5 Torx key T8 Compatible with Korloy inserts FAQ Which inserts fit this shank milling cutter? The cutter accepts APMT 11T3 indexable inserts; compatibility with Korloy-type inserts is specified for straightforward replacement. How are the inserts fastened and changed? Inserts are secured with an M2.5x5.5 Torx screw; removal and installation use a T8 key for quick, reliable changeovers. What are the key dimensions to check for toolholder fitment? Relevant dimensions include a 32 mm shank diameter, 50 mm cutting length and 180 mm overall length, plus the tool weight of 1.123 kg for balance considerations. How many cutting edges does the tool provide and what is the benefit? The tool features four cutting edges, which distribute the chip load and support consistent material removal and improved surface quality. Is the cutter suitable for shoulder and face milling? Yes, the combination of a 90° cutting angle and the specified cutting length makes the tool suitable for both shoulder and face milling tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Cutter For ENMX 0905 Indexable Inserts, 3 Flutes, 160mm Overall Length - Teknik Makina
Benefit from a robust indexable milling solution with a Ø 32 mm shank, 3 cutting edges and full compatibility with ENMX 0905 inserts; efficient set-up and reliable clamping help to reduce downtime and maintain consistent cycle times. Order directly via Metav Werkzeuge or consult our specialists for setup advice. S935TM milling cutter – indexable milling cutter, Ø 32 mm, 3 cutting edges (Teknik Makina) A S935TM milling cutter engineered for use with ENMX 0905 indexable inserts, optimised for stable milling operations in CNC machining centres and industrial workshops. Indexable design for ENMX 0905 inserts Stable Ø 32 mm shank for precise clamping Three cutting edges for smooth material removal Torx M3.5x8.6 screw with T16 key Greater throughput through indexable tooling and robust geometry The tool body is designed around indexable inserts, offering predictable tool life and quick index changes that lower per-part costs. With a Ø 32 mm shank and a design accommodating ENMX 0905 plates, the cutter delivers repeatable concentricity, which supports tighter tolerances and consistent surface finish. The combination of a rigid shank and three cutting edges reduces vibration and improves chip control, translating into measurable productivity gains on batch and continuous runs. Secure clamping and fast changeover for production reliability A secure clamping system is provided via the specified Torx screw M3.5x8.6 and matching T16 key, which ensures the insert seats are held firmly during heavy cuts and at higher feed rates. The mechanical simplicity of the fastening reduces changeover time and the risk of assembly errors, supporting shorter tool-change cycles. This design choice supports maintenance routines with predictable torque values and straightforward spare-part handling, helping to maintain uptime in the shop. Practical workshop compatibility and economical tooling strategy The cutter’s overall length 160 mm and matching shank diameter 32 mm make it suitable for standard toolholders and collet systems, enabling easy integration into existing tool sets. Compatibility with YG-1-manufactured inserts and the ENMX 0905 format offers broad availability of insert grades for various materials and cutting conditions. By using indexable plates rather than solid cutters, the mill body reduces tooling spend over time while allowing process engineers to select the most appropriate insert grade for the application. Contact Metav Werkzeuge for further technical details or to discuss application-specific setups; Metav Werkzeuge provides direct delivery from Emmerich and expert advice by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: S935TM Manufacturer: Teknik Makina Model designation: Schaftfräser for ENMX 0905 indexable inserts Compatible insert type: ENMX 0905 Compatible insert manufacturer: YG-1 Dimensions & cutting data Diameter: 32 mm Shank / clamping diameter: 32 mm Overall length: 160 mm Number of cutting edges: 3 Features & compatibility Torx screw: M3.5x8.6 Torx key: T16 Designed for indexable inserts ENMX 0905 Suited for CNC milling and industrial workshop use FAQ Which insert type fits this milling cutter? The S935TM milling cutter accepts ENMX 0905 indexable inserts; the design is matched to common ENMX geometries. Which insert manufacturers are compatible? The cutter is compatible with inserts from YG-1, enabling access to a wide range of grades for varied materials. What shank diameter and overall length does the tool have? The tool features a 32 mm shank diameter and an overall length of 160 mm, suitable for standard collet and holder systems. How many cutting edges does the cutter use? This tool uses 3 cutting edges, balancing material removal rate with surface finish and cutting forces. What screw and key are required for insert fastening? Insert clamping requires a Torx screw M3.5x8.6 and a T16 key for installation and secure fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Cutter for LNMX 0603 Indexable Inserts, 5 Cutting Edges, M3x7 Screw - Teknik Makina
Benefit from the combination of extended reach and fast insert exchange: the 150 mm overall length and compatibility with LNMX 0603 indexable inserts support reliable cycle times and lower per-part tooling costs. Order the shaft milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shaft milling cutter S287TM — indexable milling cutter Ø32 mm, 150 mm overall length (Teknik Makina) Shaft milling cutter S287TM designed for versatile face and shoulder milling with exchangeable inserts, ideal for industrial production environments Ø32 mm solid shank for stable clamping 150 mm overall length for extended reach Five cutting edges for consistent material removal Compatible with LNMX 0603 indexable inserts Greater stability and consistent machining results The S287TM is built around a substantial Ø32 mm shank and 150 mm overall length, which together deliver enhanced rigidity and an increased working envelope. This combination reduces vibration during heavy cuts and improves surface finish without relying solely on spindle speed. By choosing a tool with a robust shank diameter and balanced length, process planners secure repeatable tolerances and longer uninterrupted runs, translating directly into increased productivity and fewer scrapped parts. Fast insert changes and lower running costs Compatibility with LNMX 0603 indexable inserts, manufactured to widely accepted geometries, enables rapid tool servicing and low inventory complexity. The cutter accepts inserts from Korloy, allowing shops to source cost-effective replacements. Quick clamping is achieved with an M3x7 Torx screw and a T8 key, so downtime for tool changes is minimised. Using indexable inserts reduces consumable expense per cutting edge and provides simple adaptation between roughing and finishing by swapping insert grades rather than whole tools. Integration into machining centres and tooling systems With a 32 mm toolholder interface and standardised mounting dimensions, the milling head fits common toolholders used in production milling centres. The design facilitates secure clamping and consistent concentricity, which supports higher feed rates and longer tool life. Process engineers will value the predictable balance between reach and stiffness, allowing optimisation of step-over and axial depth to meet cycle-time targets while preserving component integrity. Practical operation and workshop benefits The tool’s five cutting edges distribute cutting forces evenly, which can lead to smoother chip evacuation and reduced peak loads on the spindle. Maintenance routines remain straightforward: replacement of LNMX 0603 inserts with the specified M3x7 fastening reduces complexity for floor technicians and shortens setup times. For procurement and production planning, the modular approach simplifies stock keeping and supports a rapid response to changing production mixes. Contact Metav Werkzeuge today for application advice and to secure Teknik Cutting Tools S287TM for your production line — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S287TM Manufacturer: Teknik Makina eClass: 21180806 ETIM: EC011860 Facts Diameter: 32 mm Shank/holder interface: 32 mm Overall length: 150 mm Number of cutting edges: 5 Special features For LNMX 0603 indexable inserts Compatible with Korloy inserts Torx screw M3x7 Torx key size T8 Indexable milling cutter design FAQ What insert type does the cutter use? The cutter is designed for LNMX 0603 indexable inserts, compatible with common grades and geometries. Is the tool compatible with Korloy inserts? Yes, the tool accepts inserts compatible with Korloy LNMX 0603 types for broad sourcing options. What are the key dimensions for fixture planning? Key dimensions: Ø32 mm diameter, 32 mm shank interface and 150 mm overall length for reach and clamping considerations. Which fastener and key are required for insert clamping? Insert clamping uses an M3x7 Torx screw secured with a T8 key to ensure consistent seating. Can this milling cutter be used for both roughing and finishing? Its indexable design and five cutting edges make it suitable for flexible use; select appropriate insert grades for roughing or finishing tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Cutter for LOGU 0303 Indexable Inserts L150mm, 5 Flutes - Teknik Makina
Benefit from a precise combination of stable multi-edge cutting, simple insert compatibility and compact tool dimensions for uninterrupted production. Order the shank milling cutter directly via Metav Werkzeuge or consult our specialists for application matching. Shank milling cutter S682TM – 32 mm shank, for LOGU 0303 indexable inserts (Teknik Makina) The Shank milling cutter S682TM is engineered as a shank-style milling cutter for LOGU 0303 indexable inserts, intended to provide consistent, repeatable machining performance in setups requiring a compact overall length. 32 mm shank diameter 60 mm effective cutting length Five cutting edges for stable machining Compatible with LOGU 0303 / Kyocera inserts Stable multi-edge cutting for predictable cycle times With five cutting edges, the design reduces chip load per edge and supports a smoother power draw during operation. This configuration promotes a steadier cut profile compared with single-edge tools and contributes to extended tool life under comparable conditions. The combination of a 32 mm shank and the 60 mm effective cutting length keeps the tool rigid in the holder while allowing sufficient reach for many finishing and semi-finishing passes. Emphasis on repeatability makes this cutter especially suitable where process stability and predictable cycle times are key procurement criteria. Quick insert changes and low maintenance effort The cutter accepts LOGU 0303 indexable inserts from Kyocera, enabling fast insert replacement without the need for complex adjustments. Replacement and clamping use a Torx T8 key and M3x7 fixing screws, presenting a straightforward procedure for maintenance teams. Fewer replacement steps reduce downtime between operations and simplify inventory management by relying on widely available insert geometries. The modest overall mass of around 0.412 kg minimises dynamic loads on toolholders during higher spindle speeds, supporting safer and cleaner insert changes. Compact dimensions for space-constrained tool setups An overall length of 150 mm with a 32 mm shank diameter offers a compact footprint that integrates easily into tool magazines and multi-spindle arrangements. The combination of compactness and a standardised interface for LOGU 0303 inserts allows workshop planners to consolidate tooling variants while maintaining the option of high-performance indexable inserts. The SKU S682TM identifies the specific configuration, aiding quick procurement and spare-part matching in purchasing systems. Consistent industrial specification and practical handling Manufactured by Teknik Makina, this shank cutter combines practical handling features with shop-floor compatibility. The cutter’s construction and fixing elements are tailored for routine industrial use, where fast insert seating and mechanical stability matter. Clear specification of the fixing hardware and shank geometry simplifies process planning and reduces uncertainty in tool change procedures. For operations seeking reliability from a compact indexable-cutter solution, the mechanical design supports efficient integration into existing machining cells. Contact Metav Werkzeuge for a technical consultation and component matching — prompt supply and advice from Emmerich are available: info@metav-werkzeuge.com, +49 2822 7131930. Technical data Article number: S682TM Manufacturer: Teknik Makina Core dimensions Diameter: 32 mm Overall length: 150 mm Weight: 0.412 kg Shank diameter: 32 mm Effective cutting length: 60 mm Cutting edges: 5 Special features Compatible with LOGU 0303 indexable inserts Compatible insert manufacturer: Kyocera Torx key: T8 Fixing screw: M3x7 Product type: Shank milling cutter FAQ Which inserts fit this shank milling cutter? The S682TM accepts LOGU 0303 indexable inserts; compatibility with Kyocera-manufactured inserts is specified for straightforward procurement and replacement. How many cutting edges does the tool have and what is the benefit? The cutter has five cutting edges, which distributes chip load and supports smoother cutting action and enhanced stability during machining. What dimensions are critical when setting up the tool in a holder? Key dimensions are the 32 mm shank diameter and 150 mm overall length, with a 60 mm effective cutting length to be considered for holder selection and reach requirements. Which fastener and key are required for insert changes? Insert clamping uses an M3x7 fixing screw tightened with a Torx T8 key, simplifying routine insert replacement and maintenance. How is this tool identified for reorder or spare parts? Order and spare-part enquiries should reference SKU S682TM to ensure the correct shank cutter configuration is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Cutter for R390 1704 Indexable Inserts 3 Teeth, 55mm Cutting Length - Teknik Makina
High stability and precise shoulder milling are achieved through the combination of a 32 mm shank and a 90° cutting angle, while the three-edge design and 55 mm cutting length enable efficient material removal and deeper reach. Order the S534TM directly via Metav Werkzeuge or consult our specialists for application guidance. S534TM solid shank milling cutter – 32 mm shank for R390-1704 indexable inserts (Teknik Makina) The S534TM is a solid shank milling cutter engineered for use with R390-1704 indexable inserts; designed to deliver square shoulders and reliable toolholding in CNC milling applications where repeatable geometry and accessibility are key 32 mm shank diameter for stable clamping Compatible with R390-1704 Sandvik inserts 3 cutting edges for efficient material removal Total length 200 mm for extended reach Stable clamping and consistent cutting for reliable cycle time Featuring a 32 mm shank and a three-edge configuration, this milling cutter provides a stable interface between spindle and toolholder, reducing chatter and enabling consistent chip formation. The 55 mm cutting length allows for deeper pocketing without compromising rigidity, while the 90° cutting angle produces true square shoulders that simplify finishing passes. These characteristics translate into shorter cycle times and fewer rework operations, offering a measurable efficiency advantage on repeat production runs. Fast indexable insert changes and low maintenance downtime Insert retention is secured with an M3.5x8.5 Torx screw, accessed using a T15 key, which enables straightforward insert replacement and minimal setup interruption. The robust fastening reduces the risk of loosening under load, maintaining positional accuracy of the inserts through long production cycles. At a mass of 0.781 kg, the cutter balances inertial stability with manageable handling during tool setup, supporting safe and efficient workshop routines without elaborate maintenance procedures. Practical reach and versatility in preparation for complex operations With a total length of 200 mm and a diameter of 32 mm, the cutter is suited to reach deeper features while preserving axial stiffness; this makes it a pragmatic choice where access and feature geometry combine to challenge shorter tools. Compatibility with Sandvik R390-1704 indexable inserts allows the use of widely available grades and geometries, facilitating rapid tooling decisions and stock management. Metav’s position as a precision partner ensures that the tool supply is supported by technical advice and a wide product range for complementary tooling needs For precision milling with reliable repeatability, request the Teknik Makina S534TM via Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com / +49 2822 7131930 for tailored application advice and compatibility checks Technical data SKU: S534TM Manufacturer: Teknik Makina Suitable for indexable inserts: R390-1704 Torx screw: M3.5x8.5 Torx key: T15 Weight: 0.781 kg Core measurements Shank diameter: 32 mm Cutting length: 55 mm Number of cutting edges: 3 Total length: 200 mm Diameter: 32 mm Cutting angle: 90° Special features Compatible with Sandvik R390-1704 indexable inserts Three-indexable-insert configuration Solid shank design for increased stiffness Brand: Teknik Makina SKU reference: S534TM FAQ What inserts are compatible with this cutter? The S534TM is designed for use with R390-1704 indexable inserts and is specified as compatible with Sandvik insert types of that designation. How is each insert secured? Inserts are fastened with an M3.5x8.5 Torx screw; the recommended key for tightening and removal is a T15. What machining geometry does the cutter provide? The tool features a 90° cutting angle, which produces square shoulders ideal for finishing and achieving precise corner geometry. Is the tool suitable for deep pocketing? Yes. The combination of a 55 mm cutting length and a 200 mm overall length gives the cutter the reach needed for deeper pockets while retaining axial stiffness. Which brand manufactures the tool and what is the SKU? The tool is produced by Teknik Makina and is listed under SKU S534TM for ordering and inventory reference. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Cutter For R390-1806 Indexable Inserts, 3 Flutes 60mm Cutting Length, 90° - Teknik Makina
Combining a 32 mm shank with a 60 mm cutting length and compatibility with Sandvik R390‑1806 indexable inserts provides high material‑removal capacity with repeatable set‑up and straightforward maintenance — order directly via Metav Werkzeuge or consult our technical advisers for application support. Schaftfräser S601TM — indexable insert milling cutter, 32 mm shank, 3 flutes (Teknik Makina) The Schaftfräser S601TM is an indexable shank milling cutter designed for use with R390‑1806 Sandvik inserts, suited to medium and heavy milling tasks where quick insert changes and stable clamping are priorities. 32 mm shank diameter for stable clamping 60 mm effective cutting length 3 cutting edges for high material removal Compatible with Sandvik R390‑1806 inserts Optimised cutting performance for increased throughput High mechanical stability is delivered by the 32 mm shank and a rigid tool body, enabling more aggressive passes without compromising workpiece accuracy. With three cutting edges and a 60 mm cutting length, the tool supports elevated material‑removal rates while maintaining predictable chip formation. The 90° cutting geometry produces clean shoulder surfaces and reduces the need for secondary finishing, so cycle times are shortened and overall process efficiency improves. This technical setup is especially advantageous where replacement inserts offer a lower cost per cut compared with solid‑carbide alternatives. Secure clamping and rapid insert serviceability Assembly and reconditioning were prioritised in the design: insert fixation uses an M4x11 Torx screw tightened with a T15 key, providing consistent clamp force and fast insert changes. The indexable concept means damaged or worn cutting edges are replaced in seconds, restoring cutting geometry without regrinding the holder. Repeatable mounting reduces set‑up deviations and ensures that each insert position provides reliable cutting performance. The combination of precise screw fastening and standardised R390‑1806 insert format simplifies stock management and reduces tooling downtime. Practical integration into workshop workflows At an overall length of 200 mm and a weight of 1.188 kg, the holder balances rigidity with manageable handling during tool changes and machine loading. Compatibility with widely used Sandvik R390‑1806 inserts makes the tool an economical choice for workshops seeking standardised consumables and predictable tool life. By replacing only the insert, running costs fall and inventory efficiency rises; the result is a more predictable production schedule and lower per‑part tooling expense. The design supports straightforward measuring and inspection routines, helping maintain process control across batch runs. For robust, indexable milling performance with proven compatibility, contact Metav Werkzeuge to discuss specification matching or to place an order — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S601TM Manufacturer: Teknik Makina Compatible inserts: R390‑1806 Compatible insert manufacturer: Sandvik Torx screw: M4x11 Torx key: T15 Core data Shank diameter: 32 mm Effective cutting length: 60 mm Number of cutting edges: 3 Overall length: 200 mm Diameter: 32 mm Cutting angle: 90° Weight: 1.188 kg Special features Indexable insert system Designed for R390‑1806 inserts Quick‑change insert fastening with Torx screw 3‑flute configuration for high MRR FAQ What insert type does this milling cutter use? The S601TM holder accepts R390‑1806 indexable inserts, a common format that simplifies spare‑part stocking. How is the insert fixed to the tool? Insert clamping is achieved with an M4x11 Torx screw, tightened using a T15 key for secure and repeatable fixation. What is the shank diameter and how does it affect stability? A 32 mm shank diameter gives the holder greater rigidity during heavy cuts, improving stability and surface finish. How many cutting edges are active and what is the benefit? The tool has three cutting edges, which balances material removal and chip control while extending time between indexings. Is the holder suitable for quick insert changes on the shop floor? Yes — the indexable design and Torx‑screw fastening enable fast insert replacement to minimise machine downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Cutter for RDMT 1003 Indexable Inserts 3 Flutes 40mm Cutting Length, 25mm Shank Diameter - Teknik Makina
Combining a robust Ø32 mm cutting diameter with a stable shank Ø25 mm and three cutting edges, the tool delivers consistent material removal and reduced downtime; order the R194TM shank milling cutter through Metav Werkzeuge or request application guidance from their specialists. Shank milling cutter R194TM — for RDMT 1003 indexable inserts, Ø32 mm, 3‑edge by Teknik Makina The Shank milling cutter R194TM is an indexable insert milling tool engineered for precision face and slot milling with RDMT 1003 inserts in industrial CNC and workshop environments. Accepts RDMT 1003 indexable inserts Ø32 mm cutting diameter 3 cutting edges for smooth removal Shank Ø25 mm, 40 mm cutting length High-performance compatibility that boosts throughput The R194TM is built around compatibility with RDMT 1003 indexable inserts, which makes it straightforward to maintain cutting performance while keeping tooling costs under control. Using indexable inserts avoids full-tool replacement and shortens setup times; this yields measurable productivity gains on repeated operations. The Ø32 mm cutting diameter provides a balance between material removal rate and surface finish, while the design supports reliable chip control during continuous milling cycles. Robust shank and compact geometry for stable cuts A shank Ø25 mm combined with a 40 mm cutting length and 120 mm overall length gives the cutter a rigid footprint that resists vibration at moderate spindle speeds. The reduced tool deflection improves dimensional consistency across batches and contributes to longer insert life. With a tool weight of 0.484 kg, the assembly remains manageable for standard toolholders yet heavy enough to dampen chatter in common machining setups, supporting repeatable results without complex fixturing. Secure clamping and service-friendly insert changes Clamping is executed using the M3.5 locking screw and an M3.5x8.5 Torx screw; the required hex driver is T15, ensuring secure fastening of the insert pocket. The three cutting edges are indexed quickly, allowing a fast return to production after a wear change. These mechanical details reduce the risk of misalignment during replacement and simplify routine servicing, making the cutter suitable for high-turnover production cells and maintenance-friendly workshops. Workshop advantages and practical handling As an indexable-insert solution, the cutter minimises inventory overhead by separating the body from the cutting tips; spare inserts are compact to store and simple to swap. The modular approach supports consistent tool performance across shifts and operators, and the clear specification of fastening hardware reduces assembly mistakes. Overall, this tool is designed to integrate with existing insert workflows and to provide dependable results for recurring milling tasks. Contact Metav Werkzeuge today for tailored cutting data and to arrange supply of the R194TM insert shank cutter for RDMT 1003 applications Technical data Article number: R194TM Manufacturer: Teknik Makina Product: Shank milling cutter for RDMT 1003 indexable inserts Facts Diameter: 32 mm Shank diameter: 25 mm Cutting length: 40 mm Overall length: 120 mm Cutting edges: 3 Weight: 0.484 kg Locking screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Special features Compatible with RDMT 1003 indexable inserts Robust shank design for reduced vibration Indexable three-edge configuration for efficient stock removal FAQ Which insert type fits this cutter? The R194TM accepts RDMT 1003 indexable inserts designed for the cutter body and provides reliable seating and rotation for each index. What are the main dimensions to check for toolholder compatibility? Check the Ø32 mm cutter diameter and shank Ø25 mm to ensure the toolholder and spindle collet match the R194TM's geometry. How many cutting edges are used and what is the benefit? The cutter uses 3 cutting edges, which balance chip load and feed per tooth for smoother material removal and consistent surface quality. Which fastening hardware is required for insert clamping? Insert clamping uses a M3.5 locking screw and an M3.5x8.5 Torx screw; the supplied driver size is T15 for secure tightening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Cutter for RDMT 12T3 Indexable Inserts 25mm Shank, 40mm Cutting Length, 3 Flutes, 120mm Overall Length - Teknik Makina
Take advantage of a compact, indexable milling solution that combines robust clamping, precise dimensions and simple insert replacement for steady production. Benefit from the Ø32 mm cutting diameter with three cutting edges and a 25 mm shank for reliable spindle engagement — order the tool directly via Metav Werkzeuge or consult the team for application advice. Shank cutter for RDMT 12T3 indexable inserts — Ø32 mm, 3 cutting edges (Teknik Makina) The shank cutter is a purpose-built milling tool for efficient face and slot milling with RDMT 12T3 indexable inserts, suitable for general machining setups requiring straightforward insert changes and secure clamping. Ø32 mm cutting diameter Three cutting edges for balanced cutting 25 mm shank for solid spindle fit 40 mm effective cutting length Rigidity and stable metal removal for consistent component quality This milling tool delivers dependable rigidity through its defined dimensions: a 32 mm cutting diameter combined with a 25 mm shank ensures stable spindle seating and reduced vibration during operation. The tool’s three cutting edges distribute cutting forces evenly, which aids in maintaining surface finish and extending insert life under comparable cutting conditions. The specified overall length of 120 mm and a cutting length of 40 mm provide a balanced reach-to-stiffness ratio, making the tool suitable for face milling and shallow slotting tasks where maintaining dimensional accuracy across multiple parts is essential. The declared weight of 0.473 kg reflects a compact design that is easy to handle during tool changes without compromising on mechanical integrity. Quick, repeatable insert replacement and secure fastening Designed around RDMT 12T3 indexable inserts, the tool simplifies maintenance and keeps downtime to a minimum. Insert retention uses a M3.5 locking screw and M3.5x8.5 Torx screw, tightened with a T15 Torx key, enabling repeatable clamping torque and safe seating of each insert. This straightforward fastening concept reduces variability in tool set-up and supports consistent cutting geometry after every insert change. The clear specification of the fastening hardware supports maintenance planning and spare part stocking, while the standardised insert interface helps to streamline inventory when using common RDMT 12T3 inserts across several toolholders. Versatility for workshop workflows and integration in production The tool’s compatibility with RDMT 12T3 inserts and its compact shank make it a flexible choice for diverse workshop machines, including those with limited toolroom space. The combination of a defined Ø32 mm diameter and a 25 mm shank supports a wide range of spindle tapers and collet systems commonly found in milling machines and machining centres. For buyers seeking operational continuity, the simple insert system and standard Torx fixation allow technicians to perform rapid swaps and keep production running. If further clarification on machine compatibility or recommended cutting parameters is required, technical guidance is available to ensure the tool is applied where it brings the most benefit. Select Teknik Makina’s shank cutter for dependable indexable milling — contact Metav Werkzeuge for order placement or tailored technical advice from Emmerich today Technical data Article number: R230TM Manufacturer: Teknik Makina Designation: Shank cutter for RDMT 12T3 indexable inserts ECLASS: 21180806 ETIM: EC011860 Core dimensions Cutting diameter: 32 mm Number of cutting edges: 3 Shank diameter: 25 mm Cutting length: 40 mm Overall length: 120 mm Weight: 0.473 kg Fixings & compatibility For RDMT 12T3 indexable inserts Locking screw: M3,5 Torx screw: M3,5x8,5 Torx key: T15 Files: 62de7e4d148ec6b71020ff8a, 62de7ee40f56dbb4de4dbf56 FAQ Which insert type is compatible with this tool? The tool is designed for RDMT 12T3 indexable inserts; RDMT 12T3 inserts seat correctly in the cutter and provide the specified cutting geometry. What are the key dimensions to check for machine compatibility? Confirm spindle and collet acceptance for a 25 mm shank, and ensure the machine can accommodate an overall length of 120 mm and a 32 mm cutting diameter. How are inserts secured and what tools are required? Inserts are secured with a M3,5 locking screw and a M3,5x8,5 Torx screw, tightened using a T15 Torx key for repeatable clamping. Can the cutter be used for both face milling and slotting? Yes; the combination of 40 mm cutting length and three cutting edges makes the tool suitable for controlled face milling and shallow slotting operations. What is the article number for ordering or inventory? The article number (SKU) is R230TM, listed for ordering and stock control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Cutter for RDMT 12T3 Indexable Inserts, 3 Flutes 70mm Cutting Length - Teknik Makina
Take advantage of the combination of robust build quality, rapid insert replacement and extended reach for reliable milling operations; the tool’s 32 mm shank, compatibility with RDMT 12T3 inserts and 300 mm overall length ensure stable performance in demanding setups. Order the R256TM directly via Metav Werkzeuge or consult the Metav team for application advice. Schaftfräser R256TM — shank milling cutter for RDMT 12T3 indexable inserts, 32 mm shank by Teknik Makina The Schaftfräser R256TM is a purpose-built shank milling cutter for indexable RDMT 12T3 inserts, engineered for operations requiring stability and extended reach in machining environments 32 mm shank for stable clamping Compatible with RDMT 12T3 indexable inserts Three cutting edges for balanced performance 300 mm overall length for extended reach Stability and precision for consistent results A thick 32 mm shank and balanced mass distribution provide reduced vibration and improved positional stability during milling. The configuration with three cutting edges delivers consistent chip removal and a predictable load per cutter tooth, which helps to maintain surface quality and repeatability across batches. The presence of an M3.5 locking screw and a dedicated T15 Torx key simplifies secure clamping of the insert seat, focusing maintenance time on quick insert changes rather than alignment work. Fast insert changes to keep production moving Compatibility with RDMT 12T3 indexable inserts means replacement is straightforward and predictable. The specified M3.5x8.5 Torx screw secures each insert reliably while allowing rapid replacement with a standard T15 driver, reducing machine downtime and supporting efficient tool management. The modular insert system makes it economical to rotate or replace cutting edges when wear occurs, extending the usable service life of the toolholder and lowering per-part machining costs. Extended reach without compromising rigidity With a 300 mm overall length combined with a 70 mm cutting length, the cutter is designed for tasks that require deeper access while maintaining rigidity. The tool’s mass—approximately 1.829 kg—contributes to dampening during cutting, which in turn helps to reduce chatter when working at longer overhangs. This balance between reach and stability supports machining of components with recessed features or extended flanks without compromising on surface finish. Durable, service-friendly design for workshop workflows Constructed for industrial use and straightforward upkeep, the R256TM allows quick replacement of worn components and uses standard fastening hardware for service simplicity. The indexable system reduces waste compared with disposable solid tools, while the organiser-friendly spare-part logic shortens tool change intervals. Supplied by Teknik Cutting Tools and distributed via Metav Werkzeuge, the tool benefits from reliable availability and a technical supply chain geared to professional workshops and production facilities. For personalised tooling advice, application matching or to secure the R256TM through Metav Werkzeuge, contact Metav Werkzeuge GmbH at +49 2822 7131930 or info@metav-werkzeuge.com to discuss specifications and compatible inserts Technical data Article number: R256TM Manufacturer: Teknik Makina Designation: Schaftfräser for RDMT 12T3 Indexable Inserts Facts Shank diameter: 32 mm Cutting length: 70 mm Overall length: 300 mm Weight: 1.829 kg Number of cutting edges: 3 Special features Compatible with RDMT 12T3 indexable inserts Locking screw: M3,5 Torx screw: M3,5x8,5 Torx key: T15 FAQ What inserts fit this cutter? The cutter accepts RDMT 12T3 indexable inserts; the clamping is secured with an M3,5 locking screw and M3,5x8,5 Torx screw as specified for the R256TM. How is the insert fixed and removed? Inserts are fastened with the M3,5x8,5 Torx screw; removal and fitting require a T15 Torx key for safe and repeatable mounting. Is the tool suitable for deep internal features? Yes. The 300 mm overall length and 70 mm cutting length make the tool suitable for operations requiring extended reach while maintaining acceptable rigidity. How many cutting edges are available and what is the benefit? The tool has three cutting edges, which provides a balanced cutting load per tooth and contributes to smoother chip evacuation and steady cutting forces. Can the cutter be serviced in a standard workshop? Routine service—insert changes, screw checks and quick inspections—can be carried out with standard workshop tools, including a T15 Torx driver. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Cutter For SDMT 09T3 Indexable Inserts, 3 Flutes 60mm Cutting Length, 150mm Overall - Teknik Makina
Take advantage of a stable 32 mm shank and a 60 mm effective cutting length to increase process reliability and reduce vibration during indexable insert milling; combine robust clamping with compatibility for SDMT 09T3 inserts for consistent chip control. Order directly via Metav Werkzeuge or consult the Metav team for application-specific setup. Indexable Insert Milling Cutter S396TM — 32 mm shank, for SDMT 09T3 inserts (Teknik Makina) Indexable Insert Milling Cutter S396TM is a modular tool designed for machining tasks with SDMT 09T3 indexable inserts, providing a robust shank and secure insert clamping for stable cutting performance in production environments Compatible with SDMT 09T3 indexable inserts 32 mm shank for stable clamping 60 mm effective cutting length Torx screw M3.5x8.5, T15 key required Greater stability for predictable machining results The solid 32 mm shank ensures a rigid connection between spindle and cutter, significantly reducing chatter and deflection during side and face milling. This mechanical stability directly translates into consistent surface finish and longer insert life, since reduced vibration lowers insert wear. For workshops seeking measurable productivity gains, the robust shank geometry supports higher feed rates and steadier tolerances, making the tool a practical choice for repetitive production runs where process repeatability is crucial. Precise insert system for fast indexability and chip control Designed to accept SDMT 09T3 indexable inserts, this cutter provides a system-oriented solution for rapid insert changes and predictable cutting behaviour. The combination of a fixed insert pocket geometry and the specified M3.5x8.5 Torx screw with T15 drive secures the insert reliably, preserving alignment under load. Fewer manual adjustments mean shorter downtime for tool changes and a quicker return to full cutting parameters, which benefits throughput on medium‑ to high‑volume components. Practical dimensions tailored to workshop workflows With a 60 mm cutting length, three cutting edges and a total length of 150 mm, the S396TM balances reach and rigidity for a range of milling operations. The three-flute arrangement promotes efficient chip evacuation while maintaining cutting stability, so operations that require moderate axial engagement see improved cycle consistency. Weighing 0.934 kg, the assembly is substantial enough for damping vibrations yet compact for standard toolholders. Compatibility with ZCC insert options expands selection flexibility for different grades and coatings, allowing process optimisation without changing toolholders. For a reliable, production-ready insert milling solution from Teknik Makina, contact Metav Werkzeuge to discuss the S396TM and its fit for specific applications — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange supply from Emmerich. Technical data Article number: S396TM Brand: Teknik Makina Suitable for indexable inserts: SDMT 09T3 Compatible insert manufacturer: ZCC Core dimensions Shank diameter: 32 mm Cutting length (shank cutting length): 60 mm Number of cutting edges: 3 Total length: 150 mm Diameter: 32 mm Weight: 0.934 kg Features and compatibility Torx screw: M3.5x8.5 Torx key: T15 For SDMT 09T3 indexable inserts SKU: S396TM FAQ Which inserts fit this cutter? The cutter accepts SDMT 09T3 indexable inserts; the design is compatible with inserts from ZCC and other suppliers offering the SDMT 09T3 geometry. What are the key dimensions to check for fixture compatibility? Check the 32 mm shank diameter, 150 mm total length and the 60 mm effective cutting length to ensure proper toolholder engagement and adequate clearance in the machine setup. How is the insert secured? Inserts are clamped with an M3.5x8.5 Torx screw; a T15 drive is specified for correct torque and secure seating. How many cutting edges does the tool have and what is the benefit? The tool has three cutting edges; this offers a compromise between smooth cutting action and efficient chip evacuation for many milling tasks. What is the SKU and brand for ordering? The product is sold as S396TM by Teknik Makina; reference this SKU when specifying the cutter for procurement or spare parts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32mm Shank Cutter For SOET 13 Indexable Inserts With Internal Cooling, 60mm Cutting Length - Teknik Makina
Take advantage of the combination of sturdy clamping, targeted cooling and straightforward insert compatibility for reliable milling results; order the tool directly via Metav Werkzeuge or consult our specialists for integration advice. Insert milling cutter S794TM — 32 mm shank, internal coolant, for SOET 13 indexable inserts (Teknik Makina) Insert milling cutter S794TM designed for indexable SOET 13 inserts, offering a compact 32 mm shank and 180 mm overall length for machining tasks that demand stability and coolant-fed cutting performance 32 mm shank for secure clamping Internal coolant for improved chip control Compatible with SOET 13 inserts (Palbit) 180 mm overall length for extended reach Stable clamping for repeatable accuracy This insert milling cutter is engineered around a 32 mm shank, delivering notable rigidity at the tool interface and helping to reduce vibration during side and face milling. The robust shank dimension supports consistent clamping, which in turn improves surface finish and prolongs tool life compared with smaller-diameter holders. For production environments where repeatability matters, the combination of a substantial shank and a well balanced cutter body contributes directly to predictable cycle times and fewer reworks. Effective cooling to extend tool life Equipped with internal coolant, the cutter routes cutting fluid directly to the cutting zone to aid chip evacuation and temperature control. This feature reduces thermal load on the cutting edges, supporting longer edge life and improved process stability when using indexable inserts. In practice, targeted coolant flow helps to prevent built-up edge on the insert and maintains geometric integrity of the cutting edge, making the tooling choice particularly suitable for continuous or semi-continuous milling operations. Practical design for quick insert changes and maintenance The tool accepts SOET 13 indexable inserts and is specified for inserts from Palbit, allowing straightforward procurement and replacement in mixed-tool inventories. The head uses M4x10 Torx screws secured with a T15 key, simplifying service procedures and minimising downtime. With three cutting edges and a 60 mm cutting length, the package balances capacity and serviceability for many standard milling tasks; replacement inserts can be changed rapidly, returning the cutter to production with minimal handling. Contact Metav Werkzeuge for tailored integration advice on the Teknik Makina S794TM with internal coolant — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss tooling setups and compatibility with existing fixtures Technical data Article number: S794TM Product type: Insert milling cutter Manufacturer: Teknik Makina Core technical data Diameter: 32 mm Overall length: 180 mm Weight: 0.956 kg Shank diameter: 32 mm Cutting length: 60 mm Number of cutting edges: 3 Special features Internal coolant Compatible with SOET 13 indexable inserts Compatible inserts manufacturer: Palbit Torx key: T15 Torx screw: M4x10 FAQ Which inserts fit this cutter? The cutter is designed for SOET 13 indexable inserts and is compatible with inserts supplied by Palbit; use the corresponding SOET 13 geometry for correct seating and cutting performance. What is the purpose of the internal coolant? Internal coolant delivers fluid directly to the cutting zone on the S794TM, improving chip evacuation and temperature control to extend insert life and maintain process stability. How many cutting edges does the tool have? The tool features three cutting edges, balancing material removal rate with vibration control and providing a practical compromise between feed per tooth and cutting stability. Which screw and key are required for insert replacement? Insert clamping is secured with M4x10 Torx screws requiring a T15 key for safe and efficient replacement. Is the shank suitable for rigid clamping systems? The 32 mm shank offers a sturdy interface for standard tool holders and rigid clamping systems, helping to reduce deflection and improve repeatability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Cutter for WNGX 0403 Indexable Inserts, 5 Flutes, M2.5x5.5 Fixing - Teknik Makina
Combining the 32 mm shank for stable clamping, five cutting edges for efficient material removal and a secure Torx fixing, the cutter delivers repeatable performance across production runs. Benefit from quick insert changes with WNGX 0403-compatible tooling and order the S946TM directly via Metav Werkzeuge or consult our specialists for setup advice. Indexable shank cutter S946TM — 32 mm shank, 5 cutting edges by Teknik Makina A robust indexable shank cutter S946TM engineered for machining with WNGX 0403 indexable inserts, offering a compact 110 mm overall length for stable rotary performance. For WNGX 0403 indexable inserts Shank diameter 32 mm for stable clamping Five cutting edges for efficient material removal Torx fixing M2.5x5.5, T8 key Increased rigidity and consistent removal rates for production work The combination of a 32 mm shank and a compact 110 mm overall length provides enhanced rigidity at the toolholder, which translates into consistent chip formation and reduced vibration during milling. With five cutting edges, material is removed more evenly per revolution, reducing cycle time on repetitive tasks. Compatibility with the WNGX 0403 insert family ensures ready availability of replacements and allows easy adjustment of cutting geometry without changing the whole tool. The S946TM is therefore suited to workflows that prioritise throughput and reproducible surface finishes. Fast indexable changes and secure clamping to minimise downtime Indexable tooling simplifies maintenance and lowers per-edge cost compared with monolithic cutters. The cutter uses a Torx M2.5x5.5 fixing screw tightened with a T8 key, giving a reliable and repeatable clamp force for each insert change. Quick, repeatable replacement of WNGX 0403 inserts reduces machine idle time and simplifies inventory control: one set of inserts can service multiple cutters. The modular approach supports both ad hoc repairs on the shop floor and planned tool-life strategies in CNC machining centres. Practical fit for workshops and machining centres seeking dependable tooling Designed by Teknik Makina for industrial use, this cutter pairs robust mechanical design with the flexibility of indexable inserts, making it appropriate for general milling operations where changeover speed and tool stability are priorities. The tool’s geometry and five-edge configuration favour steady production cycles, while the standardised fixing method eases operator training and toolroom logistics. Where consistent throughput and straightforward maintenance are required, this indexable shank cutter delivers measurable operational advantages. Contact Metav Werkzeuge to discuss suitability for specific applications, request batch availability or arrange technical guidance from our Emmerich team via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S946TM Manufacturer: Teknik Makina SKU: S946TM Facts Shank diameter: 32 mm Diameter: 32 mm Overall length: 110 mm Cutting edges: 5 Special features Compatible inserts: WNGX 0403 Compatible insert manufacturer: Korloy Fixing screw: M2.5x5.5 (Torx) Torx key: T8 Designed for indexable insert tooling FAQ What inserts fit this cutter? The cutter accepts WNGX 0403 indexable inserts; most standard WNGX 0403 grades from Korloy are compatible with the S946TM. How is the insert secured? Inserts are clamped using a Torx M2.5x5.5 screw tightened with a T8 key, which provides repeatable and secure fixing on the S946TM. Is the shank suitable for standard toolholders? The 32 mm shank is suitable for toolholders accommodating a 32 mm shank diameter and provides stable clamping for milling operations. How many cutting edges does the tool have and what is the benefit? The tool features five cutting edges, which distribute cutting forces over more edges for smoother material removal and improved productivity in continuous production. Who manufactures the cutter and who supplies it in Europe? The cutter is produced by Teknik Makina and supplied in Europe by Metav Werkzeuge; the SKU for reference is S946TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Cutter For XEKT 1904 Indexable Inserts With Internal Coolant, 220mm Overall Length - Teknik Makina
Take advantage of the combination of rigid 32 mm shank support, integrated internal coolant and full compatibility with XEKT 1904 indexable inserts for reliable milling performance; order the S388TM directly via Metav Werkzeuge or consult our specialists for application guidance. S388TM 32 mm Shank Milling Cutter with internal coolant for XEKT 1904 indexable inserts — Teknik Makina The S388TM 32 mm shank milling cutter is a precision tool designed for indexable insert milling with integrated internal coolant and a long 220 mm overall length for extended reach in industrial and workshop operations. 32 mm shank diameter for secure clamping Internal coolant for improved chip evacuation Compatible with XEKT 1904 Korloy inserts Overall length 220 mm, 81 mm cutting length Improved chip control and coolant-fed cutting performance The cutter’s internal coolant channel directs cutting fluid close to the insert tip, improving chip evacuation and reducing heat at the cutting edge. This results in more consistent tool life and fewer thermal deformations during extended runs. For machining centres and clamping systems where coolant delivery is possible, the internal feed ensures stable cutting conditions even with longer overhangs, keeping the machining process efficient and predictable. Rigidity and insert system compatibility for predictable results A 32 mm shank diameter provides high rigidity in the toolholder, which lowers runout and vibration when paired with appropriate collets or shrink-fit holders. The S388TM has been engineered for XEKT 1904 indexable inserts (Korloy), secured with the specified M4 x 8.5 fixing screw and tightened using a T15 Torx key, ensuring repeatable seating and torque transmission. This compatibility simplifies tooling logistics and supports fast insert changes for uninterrupted production. Practical design for workshop and industrial milling tasks With an overall length of 220 mm and a cutting length of 81 mm, the tool balances reach and stiffness for slotting and face-milling tasks where extended overhang is required. The two cutting edges provide an efficient material removal approach with predictable chip formation. The compact weight of approximately 1.192 kg aids handling during tool changes while maintaining mass to dampen chatter. The combination of mechanical stability and coolant supply makes this cutter suitable for a range of machining tasks where insert systems are preferred over solid-carbide solutions. Contact Metav Werkzeuge in Emmerich for a tailored quotation or to confirm insert compatibility for the S388TM shank milling cutter: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: S388TM Designation: Schaftfräser for XEKT 1904 indexable inserts Manufacturer: Teknik Makina Facts Shank diameter: 32 mm Overall length: 220 mm Cutting length: 81 mm Number of cutting edges: 2 Weight: 1.192 kg Torx key: T15 Fixing screw: M4 x 8.5 Special features Internal coolant through the shank Compatible with XEKT 1904 indexable inserts Insert manufacturer match: Korloy FAQ What inserts fit this milling cutter? The S388TM is designed for XEKT 1904 indexable inserts; compatibility with Korloy XEKT 1904 inserts is confirmed. Is the coolant channel internal or external? This shank milling cutter features an internal coolant feed routed through the shank to the insert area for improved cooling and chip removal. Which toolholder types are suitable for a 32 mm shank? A 32 mm shank requires a corresponding collet or shrink-fit holder rated for that diameter to ensure secure clamping and low runout for the S388TM. How many cutting edges does the tool have and what does that mean for feed rates? The tool has two cutting edges; this geometry typically allows higher chip load per tooth and can support efficient feed rates with the correct insert grade and machining parameters. What securing hardware is required for the inserts? Inserts are fastened with an M4 x 8.5 screw tightened with a T15 Torx key, ensuring consistent clamp force for reliable seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Cutter For XNKT 0805 Indexable Inserts, 3 Flutes, M4x10 Torx Screw - Teknik Makina
Benefit from the combination of a 32 mm shank and compatibility with XNKT 0805 indexable inserts for stable, efficient machining and fast insert changes; order the shank milling cutter directly via Metav Werkzeuge or request tailored advice from our consultants. Shank milling cutter S843TM – 32 mm shank · for XNKT 0805 indexable inserts (Teknik Makina) Shank milling cutter S843TM designed for indexable-insert milling in general workshop and industrial setups, offering a compact 125 mm overall length and secure Torx clamp for consistent performance. 32 mm shank diameter Compatible with XNKT 0805 inserts Three cutting edges for stable machining Secured with M4x10 Torx screw (T15) Maximise metal removal with consistent stability The robust 32 mm shank and three cutting edges combine to deliver improved stiffness and repeatable cutting behaviour. This design reduces chatter and keeps the cutting forces predictable, which supports higher process reliability during slotting or peripheral milling operations. The result is more consistent cycle times and less need for corrective rework, creating clear productivity gains on the shop floor. Rapid, secure insert changes to reduce downtime Indexable tooling with XNKT 0805 inserts simplifies maintenance: worn cutting edges are replaced rather than the whole tool, which lowers consumable costs and shortens machine downtime. The insert is clamped by an M4x10 Torx screw, tightened with a T15 key for a secure and repeatable fit; this mechanical simplicity translates into quicker set-ups and reliable clamping forces without complex procedures. Compact dimensions for flexible toolholder integration With an overall length of 125 mm and a compact head profile, the shank cutter is suitable for a wide range of toolholders where a 32 mm mounting diameter is standard. The combination of compact length and a rigid shank helps to maintain axial and radial stability, enabling safer entry into tighter work zones while preserving surface quality and dimensional control. Proven compatibility for predictable procurement Designed to accept XNKT 0805 indexable inserts and optimised for inserts from Korloy, this cutter supports standardisation across insert inventories and simplifies procurement. Where workshop efficiency and consistent supply are priorities, choosing a cutter that fits established insert families helps to harmonise tooling across machines and operators, supporting smoother production planning. Contact Metav Werkzeuge for customised recommendations on tooling layouts and insert selection for Teknik Makina’s S843TM shank milling cutter — our consultants can advise on integration with existing holders and supply options via Metav Werkzeuge. Technical Data SKU: S843TM Manufacturer: Teknik Makina eClass: 21180806 ETIM: EC011860 Article: for XNKT 0805 Indexable Inserts Facts Shank diameter: 32 mm Diameter: 32 mm Overall length: 125 mm Cutting edges: 3 Torx screw: M4x10 Torx key: T15 Special features Compatible with XNKT 0805 indexable inserts Compatible insert manufacturer: Korloy Secure Torx-clamped insert mounting FAQ Which insert type fits this cutter? The shank milling cutter S843TM accepts XNKT 0805 indexable inserts; Korloy inserts in this size are compatible. What is the shank diameter and why does it matter? Shank diameter is 32 mm — a larger shank improves rigidity and helps maintain cutting stability under load. How many cutting edges does the tool have? The tool is equipped with three cutting edges, which balances material removal rate with stable cutting forces. Which screw and key are required for insert clamping? Insert clamping uses an M4x10 Torx screw, tightened with a T15 key for secure, repeatable fixing. Is the S843TM suitable for standard toolholders? The overall length of 125 mm and the 32 mm shank make the S843TM suitable for many common holders designed for a 32 mm mounting diameter Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank End Mill For ADKT 1505 Indexable Inserts, 3 Flutes 45mm Cutting Length, 25mm Shank - Teknik Makina
Benefit from the combination of ADKT 1505 insert compatibility, a compact Ø32 mm cutting diameter and a secure Ø25 mm shank for fast setup and consistent results; order via Metav Werkzeuge or consult the team for application advice. Shank milling cutter S307TM – indexable-insert milling cutter, Ø32 mm, 3 flutes (Teknik Makina) The Shank milling cutter S307TM is designed for medium-duty milling using ADKT 1505 indexable inserts and is ideal for production runs where quick insert changes and dependable clamping are essential Ø 32 mm cutting diameter Three cutting edges for efficient chip removal Compatible with ADKT 1505 indexable inserts Shank Ø 25 mm for secure clamping Consistent cutting performance for repetitive production The S307TM delivers reliable chip formation through its three-flute geometry, which balances cutting force and evacuation to maintain process stability. Thanks to the Ø32 mm diameter and a cutting length of 45 mm, the design supports steady material removal rates while keeping vibrations low. For production environments this means fewer interruptions and a predictable surface finish, helping to maintain cycle times and reduce scrap. Quick insert changes and robust clamping reduce downtime A practical benefit of the indexable-insert concept is the speed of service: inserts can be replaced without removing the cutting head from the machine. The cutter uses a M4x10 Torx screw secured with a T15 key, enabling fast, repeatable insert changes and secure retention. The shank Ø25 mm provides positive clamping in common toolholders, lowering the risk of tool movement and minimising rework caused by poor seating. Compatibility with established insert systems for process flexibility Engineered for use with ADKT 1505 inserts and compatible with ISCAR insert standards, this cutter allows integration into existing tooling inventories and simplifies spare-part management. Selecting a cutter that matches common inserts reduces procurement complexity and supports quicker set‑ups across multiple machines. The combination of indexable inserts and a standardised shank supports cost-effective machining by separating cutting edges from the tool body. Practical workshop advantages and handling information With an overall length of 120 mm and a mass of 0.477 kg, the tool is compact to handle and straightforward to store. The shank construction and balanced flute count help to reduce operator fatigue during tool changes and inspection. Where surface quality and throughput matter, choosing an indexable milling cutter like this one helps shops achieve repeatable results while keeping maintenance tasks simple and economical. Contact Metav Werkzeuge today for tailored recommendations on Teknik Cutting Tools' S307TM shank milling cutter and to discuss suitable insert grades and clamping solutions from our Emmerich team Technical data Article number: S307TM Manufacturer: Teknik Makina Eclass: 21180806 ETIM: EC011860 Facts Diameter: 32 mm Number of flutes: 3 Cutting length: 45 mm Overall length: 120 mm Shank diameter: 25 mm Weight: 0.477 kg Special features For ADKT 1505 indexable inserts Compatible with ISCAR inserts Torx screw M4x10 Torx key size T15 Indexable-insert milling cutter design FAQ Which inserts fit this cutter? The S307TM is designed for ADKT 1505 indexable inserts and is compatible with inserts from ISCAR, allowing use of established grades and geometries. What toolholder size is recommended for safe clamping? A toolholder that accepts a Ø25 mm shank provides secure clamping and stable machining when using this indexable-insert cutter. How many flutes does the cutter have and what is the benefit? The cutter has three flutes, which balance cutting stability and chip evacuation for consistent surface finish during medium-duty milling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank End Mill For APKT 1604 Indexable Inserts, 3 Flutes 80mm Cutting Length - Teknik Makina
Take advantage of the combination of high stability, precise compatibility with APKT 1604 indexable inserts and an 80 mm cutting length for efficient milling cycles; order the cutter directly via Metav Werkzeuge or consult our specialists for process integration. S453TM – Shaft milling cutter by Teknik Makina, Ø 32 mm shank, 80 mm cutting length S453TM is a shank-type milling cutter designed for robust slotting and shoulder milling operations using APKT 1604 indexable inserts, ideal for medium‑ to heavy‑duty CNC applications Ø 32 mm shank diameter 80 mm cutting length for deep cuts Compatible with APKT 1604 indexable inserts Three cutting edges for smooth chip evacuation Faster cycle times through stable shank design The cutter delivers measurable productivity gains thanks to its Ø 32 mm shank, which increases rigidity at the tool holder and reduces chatter during interrupted cuts. With an 80 mm cutting length, the tool enables deeper engagement in a single pass, reducing the number of operations required to reach final dimensions. The combination of shank stability and generous cutting span supports higher feed rates and contributes directly to shorter cycle times on batch work. Fewer tool changes with standardised insert compatibility Built to accept APKT 1604 indexable inserts, the tool integrates seamlessly into workflows that already use common triangular‑style inserts. Compatibility with Korloy inserts gives access to a broad range of grades for steel, stainless steels and cast materials, so tooling can be adapted to the workpiece without replacing the holder. The insert is secured with a M4x10 Torx screw and a T15 key, ensuring repeatable clamping and quick index changes that keep machine downtime to a minimum. Consistent surface results from optimised geometry The cutter’s 90° cutting angle and three cutting edges were selected to balance stock removal and surface finish. Three flutes promote efficient chip evacuation while maintaining a uniform cutting load across the insert edges; this helps to achieve consistent shoulder faces and reduces the need for secondary finishing. The tool’s overall length of 350 mm and substantial mass provide damping that stabilises the cut, which is particularly beneficial when machining with longer overhangs. Clear specification and workshop support for confident procurement Technical clarity in the specification—shank Ø, cutting length, number of cutting edges and insert type—means purchasing decisions can be made with confidence and without unnecessary enquiries. Metav’s offering positions precision equipment within reach of workshops by combining product availability with application knowledge; for complex set‑ups the distributor can advise on insert grades and machine parameters to match material and productivity targets. This approach minimises sourcing risk while supporting efficient implementation on the shop floor. Contact Metav Werkzeuge for a tailored recommendation on the Teknik Cutting Tools S453TM shank milling cutter — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss insert grades and CNC parameters Technical Data Article number: S453TM Manufacturer: Teknik Makina SKU: S453TM Facts Shank diameter: 32 mm Cutting length: 80 mm Overall length: 350 mm Number of cutting edges: 3 Weight: 2.274 kg Cutting angle: 90° Special features For APKT 1604 indexable inserts Compatible with Korloy inserts Torx screw M4x10, Torx key T15 Three‑flute geometry for improved chip control FAQ What insert type does this cutter use? The cutter accepts APKT 1604 indexable inserts; compatible insert grades from Korloy are suitable depending on the workpiece material. Is the shank diameter suitable for standard tool holders? Yes — the Ø 32 mm shank is compatible with common 32 mm collet or shrink‑fit holders used in milling spindles. How many cutting edges are fitted and what benefit do they bring? The tool uses three cutting edges, which balance material removal and chip evacuation to deliver smoother cutting and stable surface quality. Can the screw be tightened with a standard key? The insert is secured by an M4x10 Torx screw requiring a T15 Torx key for reliable, repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank End Mill for BDMT 1704 Indexable Inserts Internal Coolant, 3 Flute, 60mm Cutting Length - Teknik Makina
Take advantage of the 32 mm shank combined with internal coolant and a secure BDMT 1704 insert interface to maintain steady production and reduce set-up time; order directly via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter S582-1TM — 32 mm shank with internal coolant for BDMT 1704 indexable inserts (Teknik Makina) Shank milling cutter for BDMT 1704 indexable inserts designed for reliable indexable-insert milling tasks where coolant delivery and secure clamping are required *32 mm shank with 60 mm cutting length *Internal coolant for reliable cooling *Compatible with BDMT 1704 inserts (Kyocera) *Three cutting edges, robust 150 mm overall length Increased metal removal with directed coolant flow The tool’s internal coolant channel directs cutting fluid close to the cutting zone, improving chip evacuation and temperature control. That results in more consistent cutting forces and reduced heat-related edge wear, which supports longer tool life and steadier part quality. Intended for indexable-insert milling workflows, this configuration helps maintain production throughput while lowering the frequency of unscheduled tool changes. Fast insert changes and repeatable clamping for uptime A robust mechanical interface ensures quick replacement of BDMT 1704 indexable inserts from Kyocera, secured by the M4x10 Torx screw and set with a T15 Torx key. The clear screw specification and standardised insert type reduce assembly time and improve repeatability between setups, minimising downtime and contributing to predictable cycle times in batch production. Stable shank geometry for consistent machining results With a 32 mm shank and 150 mm overall length, the cutter provides a balanced combination of accessibility and rigidity. The 60 mm cutting length and three cutting edges produce uniform engagement and a stable cut pattern, lowering the risk of chatter in typical milling operations. The measured mass of 0.895 kg contributes to a steady rotational inertia that supports repeatable results on horizontal and vertical milling spindles. Workshop-ready design and application guidance Designed for practical shop-floor use, the cutter suits a range of indexable-milling tasks where fast changeover and reliable coolant delivery matter. For complex setups or to confirm compatibility with a specific machine spindle or insert grade, Metav’s technical advisors can provide application guidance and recommendations to match coolant, insert grade and machining parameters to the intended workpiece and cycle requirements. Discuss machining requirements and availability with Metav Werkzeuge’s specialists in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: S582-1TM Manufacturer: Teknik Makina Product type: Shank milling cutter for BDMT 1704 indexable inserts Facts Diameter: 32 mm Overall length: 150 mm Cutting length (shaft): 60 mm Shank diameter: 32 mm Number of cutting edges: 3 Weight: 0.895 kg Torx key: T15 Torx screw: M4x10 Internal coolant: yes Special features Compatible with BDMT 1704 indexable inserts Suitable for Kyocera inserts Quick insert change via M4x10 Torx screw Designed for reliable chip evacuation via internal coolant FAQ Which insert type fits this cutter? The cutter accepts BDMT 1704 indexable inserts; the design and clamping system are matched to that insert family for consistent seating and performance. Is internal coolant supplied through the tool body? Yes, the tool features internal coolant routing to the cutting zone to assist chip removal and temperature control during milling. What torque and screw type secure the insert? Inserts are secured with an M4x10 Torx screw, tightened using a T15 Torx key as specified for the S582-1TM. Can this cutter be used with non-Kyocera inserts? The cutter is specified for BDMT 1704 inserts and is listed as compatible with Kyocera grades; alternative manufacturers producing BDMT 1704-compatible inserts may be used if seat geometry and clamping match exactly. What are the key dimensions to check for machine compatibility? Important dimensions include the 32 mm shank diameter, 150 mm overall length and 60 mm cutting length; these determine spindle fit and reach for the intended operation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank End Mill for LNHU 0904 Indexable Inserts 4 Cutting Edges, 150mm Overall Length - Teknik Makina
Take advantage of a rigid Ø 32 mm shank and 4 cutting edges for consistent material removal; compatibility with LNHU 0904 indexable inserts keeps changeovers quick. Order via Metav Werkzeuge or consult the Metav team for application advice and availability. Shank milling cutter S329TM – Ø 32 mm, 4‑cut, for LNHU 0904 indexable inserts by Teknik Makina A robust Shank milling cutter S329TM engineered for reliable peripheral milling and efficient insert changeovers in CNC and milling operations. Ø 32 mm shank diameter 4‑cut geometry for efficient removal For LNHU 0904 indexable inserts (Walter) Torx screw M3x7, Torx key T8 Maximised rigidity for stable, productive cutting A larger shank diameter delivers measurable benefits in everyday production: the Ø 32 mm body increases stiffness and reduces deflection compared with smaller holders, so the tool maintains a consistent cutting line under load. With 4 cutting edges and a cutting length of 40 mm, the design supports productive feeds and predictable tool life. The result is improved process stability and fewer scrapped parts during heavy cuts, which directly contributes to shorter cycle times and higher first‑pass yield. Fast insert changes and lower operating costs The cutter accepts LNHU 0904 indexable inserts and is specified for inserts from Walter, enabling quick edge rotation or replacement without the need for regrinding. Fixing is achieved with a M3x7 Torx screw, tightened with a T8 key, ensuring reproducible clamping force and straightforward maintenance. Indexable inserts provide an economical cost‑per‑edge approach: worn edges are replaced rapidly, downtime is reduced and toolroom workload is minimised — a clear operational advantage when planning batch runs or mixed production. Practical dimensions that suit workshop workflows With an overall length of 150 mm and a net weight of 0.972 kg, the cutter balances handling convenience with structural mass that helps dampen vibration. The 40 mm effective cutting length is suitable for a range of peripheral milling tasks where controlled chip evacuation and stable engagement matter. Operators and maintenance teams benefit from the straightforward geometry and documented specifications, which support predictable tooling cycles and make inventory planning easier for purchasing and production control. For technical application advice or to reserve the Teknik Makina S329TM for planned production runs, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 — Metav's specialists will assist with compatibility checks and delivery options Technical data Article number (SKU): S329TM Manufacturer (raw data): Teknik Makina Designation: Shank milling cutter for LNHU 0904 indexable inserts ECLASS: 21180806 ETIM: EC011860 Data Shaft diameter: 32 mm Cutting length (shaft): 40 mm Overall length: 150 mm Number of cutting edges: 4 Weight: 0.972 kg Special features For LNHU 0904 indexable inserts Compatible insert manufacturer: Walter Torx screw: M3x7 Torx key size: T8 FAQ Which inserts fit this cutter? The cutter is designed for LNHU 0904 indexable inserts; the tool accepts inserts from Walter and compatible suppliers for the LNHU 0904 profile. What is the shank diameter and why does it matter? The shank diameter is 32 mm; a larger shank increases stiffness and reduces deflection, improving stability during heavier milling operations with the S329TM shank milling cutter. How many cutting edges does the tool have? This milling tool features 4 cutting edges, which support higher material removal rates and balanced cutting forces during peripheral milling. What fastening hardware is required for the inserts? Insert clamping uses an M3x7 Torx screw and requires a T8 Torx key for secure and repeatable tightening on the S329TM. Is the S329TM suitable for automated tool changers? The tool’s dimensions (Ø 32 mm shank, 150 mm overall length) and standard insert fixation make it compatible with many automatic tool‑change systems; suitability should be confirmed against the specific machine interface and holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank End Mill For LNMT 0804 Indexable Inserts, 5 Flutes, 40mm Cutting Length - Teknik Makina
Take advantage of a robust indexable design and rigid 32 mm shank for stable machining and consistent chip control; the compatibility with LNMT 0804 inserts and ISCAR standards simplifies tool selection and replacement. Order directly via Metav Werkzeuge or consult our specialists for application matching and setup advice. Shank milling cutter S300-1TM — indexable tool with 32 mm shank and five cutters by Teknik Makina Shank milling cutter S300-1TM for light to medium-duty milling operations using LNMT 0804 indexable inserts; designed for secure clamping and fast insert changes Compatible with LNMT 0804 indexable inserts 32 mm shank diameter for rigid mounting Five cutting edges for balanced chip load Torx M2.5x7 screws, T8 key for quick service Higher throughput from indexable insert technology The use of LNMT 0804 indexable inserts allows rapid insert replacement and predictable cutting performance, which translates directly into improved machine uptime and lower per-part costs. The cutter's five cutting edges distribute the cutting forces evenly, reducing vibration and enabling a steadier feed rate. For production environments where cycle time matters, this configuration supports sustained material removal without frequent full-tool exchanges, making process planning more efficient. Secure clamping and straightforward maintenance A 32 mm shank offers enhanced rigidity in the toolholder, reducing runout and improving surface finish on the workpiece. Insert retention is managed with M2.5x7 Torx screws, serviced using a T8 key, which simplifies maintenance procedures on the shop floor and shortens changeover time. The combination of a robust holder body and standardised fastenings supports repeatable seating of the insert, contributing to consistent dimensional results across batches. Integration into existing machining cells and tooling systems Designed as a shank-mounted milling solution, the cutter's 120 mm overall length and 40 mm cutting length provide a practical balance between reach and stiffness for many spindle configurations. Compatibility with ISCAR-type reference standards for LNMT 0804 inserts eases procurement and tooling management, allowing maintenance teams to standardise on commonly available inserts. The tool's mass and geometry are optimised for stability, helping to maintain tool life and predictability under continuous use. Contact Metav Werkzeuge for tailored tooling advice and to confirm insert compatibility — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: S300-1TM Name: Shank milling cutter (Schaftfräser) for LNMT 0804 indexable inserts Brand: Teknik Makina Numbers / Core technical data Shank diameter: 32 mm Cutting length (shaft): 40 mm Overall length: 120 mm Diameter: 32 mm Number of cutters: 5 Weight: 0.775 kg Torx screw: M2,5x7 Torx key: T8 Designs / Special features Compatible with LNMT 0804 indexable inserts Suitable insert manufacturer reference: ISCAR Shank-mounted design for rigid clamping Files available: 62de7e53148ec6b71020ff8d, 62de7ee7bd24461b3d5f7a74 FAQ What insert type does the cutter accept? The cutter accepts LNMT 0804 indexable inserts; the design follows common industry dimensions for straightforward replacement. Which insert manufacturers are compatible with this tool? The tool is matched to ISCAR-style LNMT 0804 inserts; Teknik Makina’s S300-1TM is optimised for those insert geometries. What fastening hardware is required for insert changes? Insert retention uses M2.5x7 Torx screws tightened with a T8 key, facilitating quick and secure insert replacement. Is the shank size suitable for standard collets and holders? With a 32 mm shank, the cutter is intended for holders and adaptors designed for that diameter, offering a balance of reach and rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank End Mill for VCGT 1604 Indexable Inserts, 2 Flutes 60mm Cutting Length, M4x10 Screw - Teknik Makina
Combine the 32 mm shank rigidity with a 60 mm cutting length and secure M4x10 Torx clamping for consistent indexable-insert performance; order the tool directly via Metav Werkzeuge or consult our technical advisors for selection support. Shank milling cutter S720TM – 32 mm shank, for VCGT 1604 indexable inserts (Teknik Makina) The Shank milling cutter S720TM is a precision indexable-insert holder designed for robust milling tasks, offering stable clamping and straightforward insert replacement for general CNC and workshop applications. 32 mm shank diameter 60 mm cutting length Compatible with VCGT 1604 inserts Secure M4x10 Torx clamping, T15 key Increased rigidity for predictable machining results The combination of a 32 mm shank and a 200 mm overall length is engineered to balance accessibility with stiffness; this reduces deflection and vibration during material removal. With two cutting edges arranged for stable engagement, the toolholder is intended to maintain consistent chip control and surface finish under moderate to heavy cuts. The clamping system, secured by an M4x10 Torx screw and tightened using a T15 key, is specified to hold the insert firmly in place, which results in repeatable positioning and reduced downtime for clamp checks. These characteristics make the holder suitable where reproducible results and tool reliability are required. Optimised geometry for efficient insert usage A 60 mm cutting length provides extended cutting engagement while preserving rigidity at the tool tip. The insert pocket is configured for VCGT 1604 indexable inserts, enabling quick index changes and standardised insert stocking across multiple cutters. The shank-mounted design is compatible with conventional toolholders and spindle interfaces used in milling operations, and the tool's mass (approx. 1.225 kg) contributes to a steady cutting behaviour without excessive tool overhang. By using standard insert formats, machine shops can streamline inventory and achieve predictable cycle times, improving throughput in batch and single-piece production environments. Practical workshop benefits and supplier confidence The modular approach of an indexable-insert holder simplifies maintenance: worn inserts are replaced rather than the whole tool, lowering lifecycle costs and minimising service intervals. The component is delivered ready for installation with the correct Torx fastener specification, and the proven shank diameter supports common collet and chuck systems. For procurement and supply reliability, Metav acts as a central European quality filter and distributor, ensuring consistent availability and trained advisory services. If additional clarification on fitment or machine compatibility is required, technical guidance is available to support the selection process. For tailored advice or to secure supply of the S720TM shank milling cutter, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for fast delivery from Emmerich and expert product guidance Technical data SKU: S720TM Manufacturer: Teknik Makina eClass: 21180806 ETIM: EC011860 Designation (EN): for VCGT 1604 Indexable Inserts Core dimensions Shank diameter: 32 mm Cutting length (shank): 60 mm Cutting edges: 2 Overall length: 200 mm Weight: 1.225 kg Features Compatible inserts: VCGT 1604 Torx clamping screw: M4x10 Torx key size: T15 Files: 62de7ee50f56dbb4de4dbf58, 62de7e4fbd24461b3d5f7a29 FAQ Which insert type fits this cutter? The cutter is designed for VCGT 1604 indexable inserts; the pocket and clamping geometry are matched for that format to ensure correct seating and chip formation. What torque tool is required for the clamping screw? A T15 Torx key is specified for the M4x10 clamping screw; this ensures secure fastening and correct seating of the insert in the pocket. Is the shank suitable for standard collets and chucks? The 32 mm shank diameter fits common milling toolholding systems; it is intended for use where a robust shank is required to reduce overhang and increase rigidity. How many cutting edges are available and what is the benefit? The holder accepts inserts producing two cutting edges in the cutting cycle, which balances material removal rate with stable cutting forces for improved surface finish. What are the basic dimensions to check for machine compatibility? Check the 32 mm shank diameter, 200 mm overall length, and 60 mm cutting length against machine clearance and tool changer requirements before procurement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank End Mill for XOMX 0602-1204 Indexable Inserts 90° Cutting Angle, 25mm Shank Diameter - Teknik Makina
Take advantage of a stable clamping situation with a 25 mm shank, a robust Ø32 mm cutter diameter and four cutting edges that deliver consistent chip removal for industrial milling tasks; order directly via Metav Werkzeuge or consult the technical team if additional data is required. Shaft Indexable Milling Cutter S647TM — Ø32 mm, 4 cutting edges | Teknik Makina The Shaft Indexable Milling Cutter S647TM is engineered for insert milling with XOMX 0602–1204 indexable inserts, providing reliable material removal in CNC and industrial milling applications. Compatible with SECO XOMX 1204 inserts Ø32 mm cutter diameter Four cutting edges for steady cutting Shank Ø25 mm for secure clamping High material removal rate with consistent chip control The milling head combines a 32 mm diameter with four cutting edges, designed to maintain a steady material removal rate while reducing vibration and chatter. The geometry and 90° cutting angle deliver predictable cutting forces, which is particularly valuable in serial production and when machining shoulders or face surfaces. The indexable insert system simplifies edge changes and lowers downtime compared with solid-tool grinding, so production runs benefit from shorter interruptions and consistent surface quality. Robust shank and secure fastening for industrial spindles A 25 mm shank diameter and a precise overall length of 120 mm guarantee stable clamping in milling holders and tool holders used on industrial CNC machines. The tool is supplied with a Torx fastening concept (M3.5×8.5 screw, Torx key T10) to ensure repeatable insert seating and minimised play. This mechanical reliability reduces the risk of insert displacement under higher feed rates, supporting both higher productivity and reduced scrap rates in demanding workshops. Application flexibility and maintenance efficiency Compatible with XOMX 1204 indexable inserts and specified for use with SECO-style inserts, the tool is suited for a variety of materials and machining tasks where indexable milling is preferred. The replaceable insert system simplifies maintenance and inventory management: worn cutting edges are swapped quickly without regrinding the whole tool, which lowers operating costs and preserves spindle time. With a tool weight of 0.965 kg, balance and handling during tool changes remain manageable for workshop staff and automated tool changers alike. For reliable machining performance from Teknik Makina components, contact Metav Werkzeuge for ordering and detailed technical advice: info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge will assist with selection and delivery from Emmerich. Technical Data SKU: S647TM Product type: Shaft indexable milling cutter Compatibility: XOMX 0602–1204 indexable inserts Core dimensions Cutter diameter: 32 mm Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Number of cutting edges: 4 Weight: 0.965 kg Cutting angle: 90° Materials & features Insert type: XOMX 1204 compatible Recommended insert manufacturer: SECO Fastening: Torx screw M3.5×8.5 Torx key size: T10 Typical use: Indexable insert milling for industrial CNC FAQ What insert type does this cutter use? The shaft indexable milling cutter accepts XOMX 1204 indexable inserts; it is designed for use with SECO-compatible inserts for reliable seating and performance. Can the cutter be securely clamped in standard tool holders? Yes, the tool features a 25 mm shank and an overall length of 120 mm, providing secure clamping in compatible milling holders for repeatable results. How many cutting edges are available and what benefit do they provide? The cutter has four cutting edges, which deliver smoother chip flow and more even wear distribution compared with fewer-flute alternatives, improving surface finish and tool life. Is special fastening hardware required for inserts? Standard Torx fastening is used: screw M3.5×8.5 and Torx key T10, ensuring repeatable insert clamping and straightforward maintenance. Is this tool suitable for automated tool changers? With a compact weight of 0.965 kg and standard shank size, the cutter is compatible with many automated tool changer systems commonly used in industrial CNC environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Milling Cutter for ANHX 1004-1206 Indexable Inserts 90° Cutting Angle, 25mm Shank Diameter 40mm Cutting Length - Teknik Makina
Take advantage of the combination of precise insert compatibility, a compact 32 mm cutting diameter and a robust 25 mm shank for consistent, low‑vibration milling results; order the tool directly via Metav Werkzeuge or consult the technical advisors for application guidance. S763TM shank cutter – 32 mm diameter, for ANHX 1004–1206 indexable inserts (Teknik Makina) S763TM is a purpose-built shank-mounted milling cutter intended for indexable‑insert milling, offering secure insert clamping and straightforward maintenance for workshop and production use 32 mm cutting diameter 25 mm shank diameter 40 mm cutting length Compatible with ANHX 1004 inserts Built for stable, repeatable cutting in production The S763TM is engineered to deliver consistent machining through its 3 cutting edges and a 90° cutting angle, which together provide an even load distribution and predictable engagement. These geometric choices reduce chatter and support repeatable tolerances across batches, making the cutter suitable for serial production as well as precise one‑off work. The assembly is optimised for indexable‑insert workflows, allowing the milling head to maintain cutting stability during extended runs. Fast insert changes and reduced downtime Designed with practical shop routines in mind, the tool uses a M3x7 Torx screw and accepts a T8 key for secure insert fixation. The 25 mm shank and a 125 mm overall length create a compact, rigid setup for milling heads, while the 40 mm cutting length balances reach and stiffness. Quick insert replacement reduces machine downtime, and the clear mechanical interface with ANHX 1004 indexable inserts simplifies tool maintenance and inventory management for production planners and maintenance staff. Suited to workshops and industrial environments This cutter was developed for users seeking reliable insert milling with established indexable systems; it is compatible with inserts from Palbit and addresses the needs of both trade workshops and industrial shops that demand reproducible results. The tool’s moderate weight of 0.783 kg and straightforward geometry facilitate handling during tool changes and set‑up, while the robust shank supports stable cutting forces in routine machining tasks. For buyers looking for a dependable insert milling solution, the S763TM represents a pragmatic balance of performance and serviceability. Order the Teknik Makina S763TM shank cutter through Metav Werkzeuge for guaranteed supply from Emmerich and expert application advice—contact info@metav-werkzeuge.com or call +49 2822 7131930 for detailed support Technical data Article number: S763TM Manufacturer: Teknik Makina Suitable for inserts: ANHX 1004–1206 (Palbit) Facts Diameter: 32 mm Shank diameter: 25 mm Cutting length: 40 mm Number of cutting edges: 3 Overall length: 125 mm Weight: 0.783 kg Cutting angle: 90° Torx screw: M3x7 Torx key: T8 Special features Designed for ANHX 1004 indexable inserts Compatible with Palbit inserts 3‑flute design Secure Torx clamping Compact, rigid shank FAQ What types of inserts fit this cutter? The S763TM accepts ANHX 1004–1206 indexable inserts and is listed as compatible with Palbit insert variants. How is the insert secured in the milling head? Insert clamping is accomplished with a M3x7 Torx screw; the recommended tightening tool is a T8 key for correct seating and repeatable clamping force. What are the key dimensions for setup and tool holders? Key dimensions include a 32 mm cutting diameter, 25 mm shank diameter and 125 mm overall length, which assist in selecting appropriate tool holders and setting stick‑out. Is the cutter suitable for serial production runs? Yes, the combination of 3 cutting edges and a 90° cutting angle provides stable cutting behaviour that suits repetitive production tasks and helps preserve surface quality across batches. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
High-performance shank cutters and ball nose cutters for efficient milling
Insert shank cutters and ball nose cutters combine flexibility and productivity for a wide range of milling tasks. The category covers steel-bodied shank cutters fitted with indexable inserts for economical roughing, face milling, cornering and slotting, as well as ball nose cutters for contouring and 3D finishing.
How these tools work and where they belong
Shank cutters with indexable inserts use a carrier body made from hardened steel; the cutting edges are provided by removable inserts rather than a solid tool blank. Where tools do not have internal coolant, process heat and chips are managed via external coolant nozzles or compressed air, which is sufficient for open, surface-level and easily accessible milling on standard materials. Shank cutters with internal coolant feature fine internal channels that deliver coolant or blasting air directly to each cutting edge under pressure. This targeted supply is essential for deep pockets, cavities, full slotting and machining of heat-resistant or difficult-to-machine materials, because it prevents chip re-cutting, protects cutting edges from thermal overload and enables higher feed rates and improved surface quality.
Cut cycle times and reduce tooling costs
- Replaceable indexable inserts reduce consumable costs and shorten tool change time.
- Targeted internal coolant improves chip evacuation and extends insert life.
- Robust steel carrier bodies enable heavy-duty roughing without frequent tool replacement.
- Suitable for roughing, planing, corner milling and slot milling as well as precision 3D profiling with ball nose cutters.
A practical choice for purchasing and stocking tools
Metav brings a pragmatic purchasing advantage: a broad range of milling solutions is available from a single European quality hub. Metav’s focus on democratising precision means workshops benefit from a wide assortment, consistent quality control from Emmerich and steady supply — supported by decades of expertise and over 48,000 satisfied customers. Choose Metav for a centralised sourcing strategy that reduces supplier complexity while keeping access to both insert milling cutters (also referred to as insert milling cutters or indexable end mills) and ball nose cutters (also known as ball nose end mills or radius cutters) straightforward.
Quick summary
Insert shank cutters and ball nose cutters deliver flexible, cost-effective milling: replaceable inserts lower running costs, and internal coolant options enable higher performance and longer tool life where chip control is critical.
FAQ
When should I choose a shank cutter with indexable inserts rather than a solid carbide end mill?
Choose shank cutters with indexable inserts for economical roughing and high-stock-removal tasks where replacing inserts is preferable to replacing an entire tool; they are especially effective for face milling, cornering and slotting operations.
Does internal coolant make a measurable difference for ball nose cutters?
Yes. Internal coolant directed to each cutting edge reduces chip re-cutting and thermal stress, which improves surface finish and increases insert life when machining deep pockets, cavities or heat-resistant materials.
Can shank cutters without internal coolant be used for general workshop milling?
Absolutely. Tools without internal coolant rely on external coolant nozzles or compressed air and are well suited to open, superficial and easily accessible milling on standard materials.
What milling operations are shank cutters for indexable inserts typically used for?
Shank cutters with indexable inserts excel at economical roughing, planfräsen (face milling), corner milling and slot milling; ball nose cutters are the preferred choice for 3D profiling and finishing operations.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com