Efficient shaft cutters and ball nose cutters for versatile milling
Shaft cutters and ball nose cutters serve as robust rotating tools for roughing, face milling, corner milling and slotting, offering economical replacement of indexable inserts rather than whole solid tools. Available in versions with internal coolant to feed lubricant directly to each cutting edge or without internal coolant relying on external nozzles, these cutters ensure effective chip evacuation and thermal control suited to standard materials or deep pocket and cavity work. By preventing chip re-cutting and protecting cutting edges, they deliver higher feed rates, improved surface finish and extended tool life in demanding metalworking applications.
32mm Shank Milling Cutter for APKT 1003 Indexable Inserts 90° Cutting Angle, 25mm Shank Diameter - Teknik Makina
Take advantage of the combination of robust geometry, straightforward insert compatibility and secure clamping for dependable milling results; order the shank milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shank Milling Cutter S034TM – 32 mm Ø, 4 flutes (for APKT 1003–1604 Indexable Inserts) — Teknik Makina The Shank Milling Cutter S034TM is a tool body designed to accept APKT 1003–1604 indexable inserts for versatile face and slot milling in industrial production environments. Ø32 mm cutting diameter 4 cutting edges for stable machining 25 mm shank diameter, 35 mm cutting length Compatible with APKT 1003 indexable inserts Reliable cutting geometry for steady material removal The S034TM milling body delivers consistent performance through its standardised geometry: a Ø32 mm cutting diameter combined with 4 flutes and a 90° cutting angle ensures predictable chip formation and even radial engagement. This results in improved surface quality and reduced vibration during passes. The design supports repeatable tool setting and facilitates reliable process control on series production parts. By using indexable inserts, the assembly limits downtime to a rapid insert change, sustaining production throughput. Secure clamping and easy maintenance for production continuity Designed with a 25 mm shank and a 35 mm effective cutting length, the cutter body offers a balanced connection between spindle and tool, enhancing rigidity for medium-duty operations. Fastening is secured with an M2.5x5.5 Torx screw, operated with a T8 key, enabling quick insert replacement without special tooling. The compact mass of 0.768 kg supports controlled dynamics in the tool holder and simplifies handling during changeovers. Routine maintenance focuses on torque checks and insert inspection, which keeps machine downtime to a minimum and supports predictable scheduling. Practical compatibility and straightforward shop-floor integration The tool is specified for use with APKT 1003 indexable inserts and aligns with inserts from YG-1, making it a flexible option where these insert systems are already standardised. Its universal insert interface and common fixation method reduce the need for unique spare items in the tool crib, lowering logistical complexity. The combination of indexable technology and the cutter body’s features supports an efficient cost-per-cut strategy: worn cutting edges are replaced rather than the entire tool, delivering economical operation over many cycles. Contact Metav Werkzeuge to discuss how the Teknik Makina S034TM can be integrated into existing tooling setups and to arrange delivery from our Emmerich stock Technical Data SKU: S034TM Manufacturer: Teknik Makina Product: Shank milling cutter for APKT 1003-1604 indexable inserts Compatible inserts: APKT 1003 Compatible insert manufacturer: YG-1 Facts Cutting diameter: 32 mm Shank diameter: 25 mm Cutting length: 35 mm Overall length: 100 mm Number of cutting edges: 4 Cutting angle: 90° Weight: 0.768 kg Special features Torx screw: M2.5x5.5 Torx key: T8 Indexable-insert system: APKT 1003–1604 compatibility Balanced design for reduced vibration Rapid insert-change capability FAQ What inserts fit this milling body? The Shank Milling Cutter S034TM is specified for APKT 1003 indexable inserts and supports the APKT 1003–1604 range; compatible inserts from YG-1 are suitable for this cutter body. How is the insert secured to the cutter? Insert retention uses an M2.5x5.5 Torx screw tightened with a T8 key, which enables quick and repeatable insert changes for the Teknik Makina S034TM cutter body. Which shank size is required for the tool holder? The tool features a 25 mm shank diameter; holders and adaptors sized for a 25 mm shank are appropriate when using the S034TM milling body. What cutting diameter and flute count does the tool offer? This cutter provides a Ø32 mm cutting diameter with 4 flutes, offering a balance between material removal rate and surface finish for standard milling tasks. Is this cutter suitable for high-speed machining? The S034TM is designed as a robust insert-carrying cutter body; cutting speed suitability depends on the chosen APKT inserts and machining parameters rather than on the body alone—select inserts and settings matched to the application. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Milling Cutter for APKT 1003-1604 Indexable Inserts 4 Flutes, 45mm Cutting Length, 90° Cutting Angle - Teknik Makina
Take advantage of a rigid cutter body with a Ø32 mm shank and a 45 mm effective cutting length for stable, reproducible milling results; order the tool directly via Metav Werkzeuge or consult the Metav team for application advice. Indexable milling cutter S038TM — for APKT 1003–1604 indexable inserts, Ø32 mm, 4 cutting edges (Teknik Makina) The Indexable milling cutter S038TM is a shank-mounted cutter body designed for finish and semi-finish face and shoulder milling with APKT 1003–1604 indexable inserts, offering a compact 150 mm overall length for standard workshop tool posts Ø 32 mm shank diameter 45 mm effective cutting length Holds APKT 1003 inserts (YG‑1 compatible) Torx M2.5x7 fastening, T8 key required Greater rigidity for consistent machining results A larger shank diameter is the simplest way to increase tool stability in milling operations: the Ø32 mm shank of this milling cutter reduces deflection under load and improves surface finish consistency when compared with smaller holders. The 150 mm overall length keeps the tool projection moderate, which further reduces vibration and enables higher feed rates with predictable tool life. For production environments where process repeatability matters, the combination of shank size and compact geometry translates into fewer reworks and more predictable cycle times. Secure insert clamping and simple serviceability The cutter body is supplied to accept APKT 1003 indexable inserts and is compatible with YG‑1 insert geometries, simplifying procurement and inventory. Insert retention uses a Torx M2.5x7 screw tightened with a T8 key, ensuring repeatable clamping torque and straightforward insert changes at the machine. Indexable inserts let workshops separate cutting-edge wear from the expensive cutter body: worn edges are replaced in seconds, keeping downtime to a minimum and cost per cutting edge low. The 90° cutting angle offers reliable shoulder clearance and predictable chip flow for general-purpose milling. Optimised geometry for efficient machining Equipped with 4 cutting edges, the cutter body balances material removal with smooth engagement, spreading cutting forces across multiple edges for reduced load per insert. The 45 mm cutting length provides ample axial engagement for many face and shoulder operations without overextending the insert life. These characteristics support efficient material removal while maintaining control over heat and chip evacuation—advantages that improve throughput and lower the total cost of machining per component. Practical workshop details and integration With a mass of approximately 0.946 kg, the tool body is easy to handle during tool changes and inspection routines. The design suits general workshop tool posts and common milling spindle configurations; the compact overall length aids storage and tool magazine organisation. For traceability and ordering within a controlled procurement process, use SKU S038TM when requesting the cutter body or spare fastening screws from Metav Werkzeuge. As a reliable partner, Metav supports selection and logistics so that precision tools arrive quickly and without administrative friction. For tailored advice on application, compatibility or to secure the Teknik Makina S038TM from Metav Werkzeuge, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to request a quotation or technical guidance Technical Data Article number: S038TM Manufacturer: Teknik Makina SKU: S038TM Compatible inserts: APKT 1003 Compatible insert maker: YG-1 Fastening screw: M2,5x7 (Torx T8) Numbers / Core technical data Shank diameter: 32 mm Effective cutting length: 45 mm Overall length: 150 mm Weight: 0.946 kg Number of cutting edges: 4 Cutting angle: 90° Special features / Versions For APKT 1003–1604 indexable inserts Torx screw clamping system M2,5x7 Compatible with YG‑1 insert geometries Compact 150 mm overall length FAQ Which insert grade and size fits this cutter? The cutter accepts APKT 1003 indexable inserts; matching grades from YG‑1 are compatible and commonly used with this cutter body. What toolholder shank does the body require? The body presents a Ø32 mm shank interface; compatibility with a specific spindle or adaptor depends on the machine’s toolholder system. How is the insert secured and what key is needed? Inserts are fastened with an M2.5x7 Torx screw; a T8 key is required to achieve the correct clamping. Is the cutter suitable for shoulder milling with light overhangs? Yes. The 90° cutting angle, 45 mm cutting length and Ø32 mm shank offer good rigidity for face and shoulder milling with moderate overhang. What identifier should be quoted when ordering spare parts or replacements? Use SKU S038TM and reference the Teknik Makina cutter body when ordering replacement screws, inserts or spare bodies. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Milling Cutter For APKT 1705 Indexable Inserts, 3 Flutes 60mm Cutting Length - Teknik Makina
Take advantage of a robust combination of precise insert compatibility, a rigid Ø32 mm shank and a compact overall length for controlled, high-productivity milling. Order the cutter through Metav Werkzeuge or contact the Metav consultants for tailored technical advice. Indexable Insert Milling Cutter S662-1TM – Ø32 mm shank, for APKT 1705 inserts (Teknik Makina) A versatile Indexable Insert Milling Cutter S662-1TM engineered for insert-based milling operations where quick indexable-changeover and stable toolholding are required in conventional and CNC setups. Ø32 mm shank for stable mounting Compatible with APKT 1705 inserts Three cutting edges for steady feed M4x10 Torx screw included (T15) Stable mounting for consistent machining results The Ø32 mm shank and compact body deliver increased rigidity and reduced vibration during cuts, which directly supports repeatable dimensional control. A rigid tool body reduces chatter, so the cutter body maintains a predictable cutting behaviour when fitted into standard toolholders. The solid mounting diameter is especially valuable for operations that demand consistent surface quality and tight tolerances, as it minimises run-out and preserves the lifetime of inserts and adapter components. Fast insert changes and predictable clamping This milling cutter accepts APKT 1705 indexable inserts and is supplied with an M4x10 Torx screw and T15 key specification for secure, repeatable clamping. The use of a standard screw and key simplifies maintenance cycles and reduces downtime, because inserts can be exchanged without specialist tools. Compatibility with common insert geometries enables straightforward inventory management and faster set-up times on the shop floor, promoting efficient shift-to-shift throughput. Geometry designed for stable material removal Equipped with three cutting edges, the cutter body balances material removal rate and feed stability to deliver smooth chip evacuation and consistent cutting forces. The 60 mm effective cutting length offers a compromise between reach and stiffness, allowing for both side and face-milling applications where a controlled depth of cut is required. This geometry supports steady machining under moderate cutting parameters, helping to protect insert edges and extend service intervals. Practical build for everyday workshop reliability With an overall length of 200 mm and a mass of 1.236 kg, the tool body is compact enough for constrained setups yet heavy enough to feel robust during handling. The body has been designed for repeatable fitment in standard arbors and holders; as a result, tool change procedures are straightforward and safe. The combination of accessible clamping hardware and a standard insert system reduces the need for specialised spare parts, making maintenance predictable and cost-effective. Integration into production and supply benefits Suppliers such as Taegutec are listed as compatible insert manufacturers, which supports flexible purchasing and fast supply-chain decisions. The cutter body is produced by Teknik Makina and is intended for industrial use in milling applications that rely on indexable insert systems. For workshops seeking simplified tooling logistics, the standardisation around APKT 1705 inserts helps consolidate cutter bodies and inserts across multiple machines, lowering administrative complexity and stock variety. For application-specific recommendations or to arrange a supply, contact Metav Werkzeuge — the experts at Metav will advise on the Teknik Makina indexable milling cutter S662-1TM and compatible inserts, and can support fast procurement and delivery from Emmerich. Technical Data Article number: S662-1TM Manufacturer: Teknik Makina Facts Shank diameter: 32 mm Cutting length (shaft): 60 mm Overall length: 200 mm Number of cutting edges: 3 Weight: 1.236 kg Special features Compatible inserts: APKT 1705 Compatible insert manufacturers: Taegutec Fastening screw: M4x10 Torx Torx key size: T15 FAQ Which inserts fit this cutter body? The cutter is designed for APKT 1705 indexable inserts; compatible inserts from manufacturers such as Taegutec can be used with the S662-1TM. What is the shank diameter and why it matters? The tool features a 32 mm shank, which provides improved rigidity and reduced run-out compared with smaller diameters, supporting consistent machining accuracy. How many cutting edges does the cutter use? The cutter body accepts arrangements for three cutting edges, offering a balance between material removal rate and feed stability. Which fastening hardware is provided or required? Clamping uses an M4x10 Torx screw with T15 key specification for secure and repeatable insert retention. Who manufactures this cutter and where can it be sourced? The tool body is manufactured by Teknik Makina and can be sourced via Metav Werkzeuge; reference SKU S662-1TM when enquiring. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Milling Cutter For APMT 0903 Indexable Inserts, 5 Flutes, 130mm Overall Length - Teknik Makina
Benefit from the combination of a 32 mm diameter, five cutting edges and a 130 mm overall length for stable, high‑feed milling; order the indexable insert milling cutter directly via Metav Werkzeuge or consult our specialists for application advice. Indexable Insert Milling Cutter S050TM — for APMT 0903 Indexable Inserts, 32 mm diameter The Indexable Insert Milling Cutter S050TM is a shank-mounted cutter designed for heavy‑duty face and shoulder milling with APMT 0903 indexable inserts, offering reliable compatibility and robust chip evacuation. 32 mm diameter for robust material removal Five cutting edges for high productivity Compatible with APMT 0903 Korloy inserts Torx clamp M2.5x5.5 with T8 key Stable cutting geometry for consistent material removal The cutter features a 32 mm nominal diameter and five cutting edges, which together ensure balanced load distribution and improved surface finish during interrupted cuts. The combination of a substantial shank and a 130 mm overall length reduces vibration and runout, enabling stable milling in both roughing and semi‑finishing operations. The tool body geometry has been conceived to promote reliable chip flow; this reduces recutting and helps maintain tool life, resulting in measurable process stability on mixed production batches. Engineered compatibility and quick insert changes Designed specifically for APMT 0903 indexable inserts, the holder accepts inserts from Korloy, enabling straightforward integration into existing tooling stocks. The clamping system uses a Torx M2.5x5.5 screw with a T8 key, allowing quick, repeatable insert replacement and minimal downtime at the machine. For workshops that value modularity, this cutter delivers the operational benefit of fast insert changes and predictable seating accuracy, which shortens setup time and supports consistent part quality across shifts. Practical workshop benefits and handling With a mass of 0.73 kg and a compact form factor, the tool balances rigidity with manageable handling during mounting and inspection. The solid shank design simplifies clamping in standard toolholders while the 30 mm effective cutting height provides ample depth-of-cut options for common face‑milling tasks. Where tool life and repeatability matter, this cutter offers a practical route to increased throughput without complex retooling—suitable for jobbing shops and production lines alike. Integrating into production and quality routines The milling cutter supports predictable process parameters when paired with the recommended inserts; predictable cutting geometry facilitates programming of CAM paths and easier optimisation of feeds and speeds. For quality assurance, the tool’s dimensions and clamping features enable consistent repositioning after maintenance. When traceability and supply reliability are priorities, partnering with a supplier that acts as a quality filter for the European market reduces procurement risk and streamlines stock management. For reliable compatibility with APMT 0903 inserts and assured delivery from a trusted partner, contact Metav Werkzeuge to secure the Teknik Cutting Tools Indexable Insert Milling Cutter S050TM — expert advice and rapid supply from Emmerich available on request. Technical data Article number: S050TM Manufacturer: Teknik Cutting Tools / Teknik Makina Facts Diameter: 32 mm Shank diameter: 32 mm Overall length: 130 mm Cutting height: 30 mm Number of cutting edges: 5 Weight: 0.73 kg Special features Compatible with APMT 0903 indexable inserts Suitable for Korloy inserts Torx clamp screw M2.5x5.5 Torx key size T8 FAQ What inserts fit this cutter? The cutter is designed for APMT 0903 indexable inserts and is compatible with inserts from Korloy, which ensures straightforward integration into existing insert stocks. How many cutting edges does the tool have and what is the benefit? The tool has five cutting edges, which provide improved productivity and a more even load distribution for smoother milling and extended insert life. What are the key dimensions to check when ordering toolholders? Check the 32 mm shank diameter and the 130 mm overall length to ensure compatibility with the existing toolholder and sufficient stick‑out for the intended milling operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
32mm Shank Milling Cutter for APXT 1003 Indexable Inserts 4 Flutes, 25mm Shank Diameter 35mm Cutting Length - Teknik Makina
Take advantage of a rigid, indexable design and simple insert changes to keep machining cycles consistent; the combination of a Ø32 mm cutting diameter, a 25 mm shank and secure Torx clamping reduces vibration and setup time. Order the cutter through Metav Werkzeuge or ask the consultants for batch availability and technical guidance. S152TM — Indexable insert milling cutter, Ø32 mm, shank Ø25 mm The S152TM is an indexable insert milling cutter engineered for use with APXT 1003 indexable inserts, suited to workshop and production milling tasks where repeatable results and quick insert replacement are required Indexable milling cutter for APXT 1003 inserts Ø32 mm cutting diameter, 4 cutting edges 25 mm shank diameter, overall length 100 mm Torx screw M2.5x5.5, T8 key for secure clamping Consistent cutting performance through indexable insert technology Designed as an indexable insert milling cutter, this tool delivers consistent results by using standard APXT 1003 inserts. Indexable systems separate the cutting geometry from the body of the tool: worn edges are restored by rotating or replacing the insert rather than regrinding the whole cutter. This approach reduces machine downtime and lowers long-term tooling spend while maintaining a repeatable cutting edge geometry. The cutter’s 4 cutting edges and a true 90° cutting angle support even material removal and predictable tool life, which helps planners calculate production runs with greater confidence. Rigidity and toolholding for improved process stability The tool body features a 25 mm shank and a Ø32 mm cutting diameter, with an overall length of 100 mm and a shank cutting length of 35 mm, characteristics that provide a combination of stiffness and reach. A stiffer shank reduces deflection under load, improving dimensional accuracy and surface finish in moderate-depth milling operations. The relatively compact overall length keeps the tool’s centre of gravity closer to the spindle, which aids vibration damping and promotes stable cutting at higher feed rates. The unit weight of 0.415 kg further reflects a balance between robust construction and manageable mass for tool changers and manual handling. Fast clamping and straightforward maintenance for production workflows Clamping is secured with a Torx M2.5x5.5 screw driven by a T8 key, enabling quick and reliable insert changes on the shop floor. Using one standard insert type simplifies stock management and reduces the number of spare parts required in the tooling cabinet. The cutter is compatible with Korloy inserts, ensuring broad availability of replacement inserts from established suppliers. For operations aiming to improve throughput, the combination of simple maintenance, standardised inserts and a proven insert geometry supports shorter setup intervals and predictable machining cycles. For robust, indexable milling with predictable results, choose the Teknik Makina S152TM and contact Metav Werkzeuge for detailed availability and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: S152TM Manufacturer: Teknik Makina EClass: 21180806 ETIM: EC011860 Dimensions & core data Diameter: 32 mm Shank diameter: 25 mm Shank cutting length: 35 mm Overall length: 100 mm Cutting edges: 4 Weight: 0.415 kg Cutting angle: 90° Features & compatibility For APXT 1003 indexable inserts Compatible with Korloy inserts Torx screw M2.5x5.5 Torx key T8 Indexable insert milling cutter FAQ Is the cutter compatible with APXT 1003 inserts? Yes. The S152TM is designed specifically for APXT 1003 indexable inserts and accepts inserts from Korloy that match that designation. Which clamping hardware is required for insert changes? Insert clamping uses a Torx M2.5x5.5 screw; a T8 Torx key is required for secure tightening and removal. What are the main dimensions to consider for toolholder selection? Key dimensions are: cutting diameter 32 mm, shank diameter 25 mm, shank cutting length 35 mm and overall length 100 mm. How does the indexable system benefit production workflows? Indexable inserts permit rapid edge renewal and standardised spare parts, reducing downtime and simplifying inventory compared with solid-tool regrinds. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Milling Cutter for BDMT 1704 Indexable Inserts 3 Flutes 25mm Shank Diameter 40mm Cutting Length 90° - Teknik Makina
Take advantage of precise compatibility with BDMT 1704 indexable inserts and a compact, robust design to maintain steady productivity; order or request tailored advice via Metav Werkzeuge for integration into existing toolsets. Milling cutter S581TM — for BDMT 1704 indexable inserts, 32 mm diameter (Teknik Makina) S581TM is a purpose-built milling cutter for industrial metalworking, designed to accept BDMT 1704 indexable inserts and provide reliable, repeatable performance in production and job-shop environments. 32 mm cutting diameter Compatible with BDMT 1704 inserts Shank Ø 25 mm for stable clamping Torx screw M4x10, key T15 Precision and assured compatibility for indexable inserts The S581TM is engineered as an indexable insert milling cutter to simplify tooling management: the tool accepts BDMT 1704 inserts, a widespread indexable format, allowing quick replacement without full regrinding. The 32 mm cutting diameter and 25 mm shank ensure a stable connection to the toolholder, which reduces vibration and improves dimensional consistency. For users unfamiliar with indexable systems, an indexable cutter carries removable inserts that are clamped into seats; this separates the cutting material from the tool body and lowers long-term operating costs. Efficient material removal with a three-edge configuration With 3 cutting edges, the cutter balances material removal rate and surface finish: additional cutting edges increase feed capacity while distributing cutting forces more evenly. The 40 mm cutting length provides sufficient engagement for a variety of slotting and peripheral milling tasks without excessive overhang. These geometric choices support higher productivity and predictable tool life when combined with appropriate feeds and speeds. The tool’s mass of 0.48 kg contributes to a rigid setup that resists chatter during heavier passes. Secure clamping and straightforward insert changes Insert retention is controlled with a M4x10 Torx screw tightened using a T15 key, delivering a compact and reliable clamping method that is common across many milling systems. This standardised fastening makes insert exchange fast and repeatable, reducing downtime on the shop floor. The tool’s 90° cutting angle is suited to face and shoulder milling where square edges are required. Clear, repeatable clamping reduces the risk of misalignment, which otherwise causes premature insert wear or poor surface quality. Integration benefits and supply reliability from Metav Selecting the S581TM for a production line or workshop benefits procurement and logistics: the cutter matches Kyocera‑compatible inserts and fits common shank interfaces, enabling inventory consolidation and easier tool changeovers. Delivered from a European supply channel, the tooling can be incorporated into existing processes with minimal adaptation. Metav Werkzeuge’s role as a precision partner helps ensure timely delivery and technical advice for workshop integration without unnecessary complexity. Contact Metav Werkzeuge for a specification check, compatibility confirmation or a tailored quote for the S581TM milling cutter and compatible BDMT 1704 inserts — technical advisers are available to discuss holder fitment and stocking options Technical data Article number: S581TM Manufacturer: Teknik Makina Product name: Milling cutter for BDMT 1704 indexable inserts Facts Diameter: 32 mm Shank diameter: 25 mm Cutting length: 40 mm Overall length: 120 mm Cutting edges: 3 Weight: 0.48 kg Cutting angle: 90° Special features For indexable inserts BDMT 1704 Compatible insert manufacturer: Kyocera Torx screw: M4x10 Torx key size: T15 SKU: S581TM FAQ Which inserts does this cutter accept? The cutter is designed for BDMT 1704 indexable inserts; it is delivered as a body compatible with that insert designation and clamping method. What are the key dimensions for toolholder selection? Key values are a 32 mm cutting diameter and a 25 mm shank diameter; the overall length is 120 mm and cutting length is 40 mm. How are the inserts secured in the cutter? Inserts are secured with a M4x10 Torx screw, tightened with a T15 key to provide a repeatable and secure clamping interface. Is this cutter suitable for high material removal rates? The three‑edge configuration and 40 mm cutting length support efficient removal when combined with suitable feeds, speeds and rigid clamping. What identifying information helps when reordering? Use SKU S581TM, the designation for a milling cutter compatible with BDMT 1704 inserts manufactured by Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Milling Cutter for BDMT 1704 Indexable Inserts Internal Coolant, 120mm - Teknik Makina
Combining internal coolant with a 32 mm cutting diameter, this Teknik Makina shank milling cutter delivers stable material removal and improved tool life; order directly via Metav Werkzeuge or ask our consultants for application guidance. Shank milling cutter – 32 mm with internal coolant (Teknik Makina) A robust shank milling cutter designed for indexable insert milling with BDMT 1704 inserts, offering secure clamping and coolant-fed performance for demanding metalworking tasks. 32 mm diameter for stable cutting Internal coolant for improved chip evacuation Compatible with BDMT 1704 indexable inserts 25 mm shank for secure clamping Greater process stability through coolant-fed cutting The cutter's defining advantage is its internal coolant feed, which directs fluid directly to the cutting zone. This reduces heat at the cutting edge, improves chip evacuation and extends insert life, yielding more consistent cycle times. With a 32 mm diameter the tool provides a larger cutting cross-section for robust material removal, supporting higher metal removal rates while maintaining dimensional stability. Secure clamping and reliable torque transmission A 25 mm shank ensures firm clamping in standard toolholders, reducing runout and vibration during heavy cuts. The connection is secured with a M4x8.5 Torx screw operated by a T15 key, which allows repeatable, high-torque fastening and straightforward insert replacement. Together these features reduce set-up time and help maintain consistent concentricity during production runs. Compatibility and flexible indexable insert use Engineered for BDMT 1704 indexable inserts and compatible with Kyocera insert systems, the cutter supports rapid interchangeability between grades and geometries. This flexibility enables optimisation of cutting data for roughing or semi-finishing without changing the holder, which is particularly advantageous in mixed-production environments where tool adaptability reduces inventory and changeover complexity. Practical handling and maintenance advantages With an overall length of 120 mm and a cutting length of 40 mm, the tool balances reach with stiffness to minimise chatter in extended operations. At a weight of 0.481 kg the cutter is easy to handle during tool changes yet substantial enough for stable machining. The design simplifies routine maintenance: insert changes and coolant checks are fast, while the coolant channel supports consistent thermal control across shifts. For consistent, coolant-fed milling operations choose the Teknik Makina cutter (SKU S581-1TM) and contact Metav Werkzeuge for expert selection and fast supply from Emmerich. Technical data SKU: S581-1TM Label: 32mm Schaftfräser BDMT 1704 L120mm mit Innenkühlung Manufacturer: Teknik Makina Dimensions / core data Diameter: 32 mm Overall length: 120 mm Weight: 0.481 kg Shank diameter: 25 mm Cutting length: 40 mm Cutting edges: 3 Features / compatibility Internal coolant: yes Compatible inserts: BDMT 1704 Compatible insert manufacturer: Kyocera Torx key: T15 Torx screw: M4x8.5 FAQ Which insert type fits this cutter? The cutter accepts BDMT 1704 indexable inserts; Teknik Makina's shank milling cutter (SKU S581-1TM) is specified for that insert geometry. Is the tool suitable for high-feed operations? With internal coolant and a 32 mm diameter the cutter supports demanding feedrates; appropriate insert grade selection is recommended for specific materials. How is the insert fixed to the cutter? Inserts are secured with an M4x8.5 Torx screw tightened with a T15 key; this provides repeatable clamping and reliable torque transmission. What machine interfaces are recommended? The 25 mm shank is intended for standard toolholders that accept a 25 mm shank diameter; ensure correct clamping and runout checks before entering production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Milling Cutter for BLMP 0904 Indexable Inserts Internal Coolant, 150mm - Teknik Makina
Take advantage of the combination of robust stability, internal coolant and compatibility with BLMP 0904 indexable inserts for reliable material removal and straightforward insert changes; order the tool directly via Metav Werkzeuge or contact our consultants for application support. Milling cutter for BLMP 0904 indexable inserts — Teknik Makina, 32 mm, internal coolant Milling cutter for BLMP 0904 indexable inserts designed for efficient face and shoulder milling with indexable inserts in industrial machining environments. 32 mm cutting diameter Internal coolant for improved cooling Compatible with BLMP 0904 Taegutec inserts 25 mm shank, 150 mm overall length High metal removal with controlled chip management The Teknik Makina milling body is built to deliver consistent removal rates while maintaining process stability. With a 32 mm cutting diameter and three cutting edges, the design balances aggressive stock removal and vibration damping, which supports predictable cycle times on production runs. The modular insert system reduces downtime: worn edges are replaced instead of the entire tool body, keeping machine utilisation high and cutting costs per component low. The result is a solution that supports throughput without compromising finish quality. Optimised cooling for extended edge life Built-in internal coolant channels supply cutting fluid directly to the insert rake face, improving heat dissipation and chip evacuation at the cutting zone. This targeted supply reduces flank wear and thermal loading on the insert, thereby extending service intervals and helping to preserve dimensional stability across batches. For shops seeking consistent surface quality and longer insert life, the internal coolant feature offers a measurable advantage in both tool performance and total machining economy. Secure clamping and quick insert changes for productive workflows The milling cutter accepts BLMP 0904 indexable inserts from Taegutec, enabling access to widely available carbide grades and geometries. Insert retention is achieved with an M3.5x8.5 Torx screw operated with a T10 key, providing a reliable and reproducible clamp force for repeatable seating. The 25 mm shank ensures rigid support in standard tool holders, reducing runout-related issues and improving surface finish. The design supports straightforward maintenance procedures, helping to keep machine set-up time to a minimum. Engineered dimensions for workshop integration and handling With an overall length of 150 mm, a cutting length of 40 mm and a mass of approximately 0.885 kg, the milling body is sized to integrate into common tool systems without excessive overhang. The tool body’s proportions favour a compromise between cutting reach and stiffness, which is beneficial when preparing fixtures or programming toolpaths for production components. The Article SKU S490TM identifies this configuration for ordering and inventory; combined with Metav’s supply network, secure procurement and rapid delivery are readily available. For tailored technical advice or to secure supply of the Teknik Cutting Tools milling cutter with internal coolant (SKU S490TM), contact Metav Werkzeuge GmbH in Emmerich for fast, expert assistance: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: S490TM Diameter: 32 mm Shank diameter: 25 mm Overall length: 150 mm Cutting length: 40 mm Cutting edges: 3 Weight: 0.885 kg Internal coolant: Yes Compatible inserts: BLMP 0904 Compatible insert manufacturer: Taegutec Torx key: T10 Torx screw: M3.5x8.5 Core specifications Cutting diameter: 32 mm Shank diameter: 25 mm Overall length: 150 mm Cutting length: 40 mm Number of cutting edges: 3 Weight: 0.885 kg Special features Internal coolant channels Indexable insert body for BLMP 0904 Compatible with Taegutec BLMP 0904 inserts Torx screw retention M3.5x8.5 Torx key T10 Manufacturer: Teknik Makina FAQ What inserts does this milling cutter accept? The milling cutter is designed for BLMP 0904 indexable inserts and is compatible with Taegutec insert grades suitable for the application. Is the tool supplied with screws and keys? The tool uses an M3.5x8.5 Torx screw with a T10 key for retention; these items are specified for secure clamp force and are referenced on the product SKU S490TM. Does the body have internal coolant? Yes, the cutter features internal coolant channels to direct cutting fluid to the insert face, which assists chip evacuation and reduces thermal load on the inserts. Which shank diameter is required for the holder? The tool has a 25 mm shank, which fits standard 25 mm holders and provides the necessary rigidity for stable milling operations. How does this tool improve workshop productivity? By combining a robust 32 mm cutting diameter, three-edge insert geometry and internal coolant, the body reduces changeover time and extends insert life, supporting more efficient production cycles. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Milling Cutter for R390 1704 Indexable Inserts 90° Cutting Angle, 45mm Cutting Length - Teknik Makina
Take advantage of robust, indexable-insert tooling with high repeatability and straightforward maintenance — the combination of a compact 32 mm cutting diameter, a rigid 25 mm shank and secure Torx clamping ensures predictable production cycles. Order the shaft-mounted insert milling cutter via Metav Werkzeuge or request advice from the technical consultants. Shaft Cutter S514TM — insert milling cutter for R390-1704 indexable inserts, 32 mm diameter The Shaft Cutter S514TM is an indexable-insert milling cutter designed for precision shoulder and face milling with R390-1704 style inserts in industrial machining centres 32 mm cutting diameter for versatile milling Three cutting edges for stable chip control Shank 25 mm for rigid toolholding Accepts R390-1704 Sandvik indexable inserts Built for consistent, high-throughput milling The insert milling cutter is engineered to deliver stable cutting performance across repeated cycles. With a 32 mm nominal diameter and 3 cutting edges, the tool balances material removal rate and surface finish while maintaining a predictable tool life. The 90° cutting geometry facilitates square shoulder milling and reduces secondary passes; this results in fewer set-ups and a smoother workflow at the machine. Compatibility with the R390-1704 insert form ensures access to a wide range of cutting grades and geometries from established insert manufacturers for adaptability across batch runs. Secure clamping and rapid index change to cut downtime Insert retention is achieved using the specified Torx screw and key for repeatable clamping. The cutter ships prepared for Torx M3.5x8.5 securing screws and requires a T15 driver, allowing quick insert changes without specialised fixtures. This straightforward fixation reduces changeover time and minimises the risk of incorrect torquing during maintenance intervals. The indexable design keeps consumable costs lower than solid tools while preserving the ease of service typical for insert systems, supporting efficient workshop routines and lower overall tooling cost per component. Predictable set-up with compact, rigid dimensions Critical dimensions are optimised for rigidity and accessibility: a 25 mm shank diameter provides secure clamping in standard toolholders while the 45 mm effective cutting length and 120 mm overall length allow confident engagement in common milling applications. The cutter’s mass (approx. 0.459 kg) contributes to dynamic stability without excessive spindle load. These measurable parameters simplify fixture planning and balancing, enabling machine operators and programming engineers to forecast cutting conditions more reliably and reduce trial-and-error on first-off parts. For reliable production with the Teknik Makina S514TM insert milling cutter and prompt supply via Metav Werkzeuge, contact Metav Werkzeuge in Emmerich for tailored technical advice and fast delivery at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S514TM Brand: Teknik Makina Fits inserts: R390-1704 (Sandvik) Screw: M3.5x8.5 Torx Torx key: T15 Numbers / core technical data Diameter: 32 mm Shank diameter: 25 mm Cutting length: 45 mm Overall length: 120 mm Number of cuts: 3 Cutting angle: 90° Weight: 0.459 kg Special features For R390 1704 indexable inserts Compatible with Sandvik inserts Indexable-insert milling cutter design Torx clamping for secure insert retention FAQ Which indexable inserts fit this cutter? The shaft-mounted insert milling cutter accepts R390-1704 indexable inserts; Sandvik-compatible grades are recommended for versatile machining. What screw and driver are required to secure the inserts? Inserts are secured with Torx M3.5x8.5 screws and a T15 Torx key for torque-consistent clamping. What are the key dimensions to check when setting up the tool? Check the 32 mm cutting diameter, 25 mm shank diameter, 45 mm cutting length and 120 mm overall length for correct holder selection and collision clearance. How many cutting edges does this cutter have and what is the advantage? The cutter features 3 cutting edges, offering stable chip control and a balance between material removal rate and surface finish. Is the tool suitable for square shoulder milling? Yes — the 90° cutting angle is designed for precise shoulder and face milling tasks, enabling clean square corners and reduced finishing passes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Milling Cutter For R390-1704 Indexable Inserts, 3 Flutes 55mm Cutting Length, 90° Cutting Angle - Teknik Makina
Benefit from a robust combination of 32 mm shank stability, compatibility with R390-1704 indexable inserts and a true 90° cutting geometry for dependable, repeatable results on the shop floor; order the tool via Metav Werkzeuge or request specialist advice from their consultants. Indexable shank cutter S524TM – 32 mm shank for R390‑1704 indexable inserts | Teknik Makina Indexable shank cutter S524TM offers precision milling in heavy‑duty setups and is designed for use with R390‑1704 indexable inserts to simplify tool management in production. Compatible with Sandvik R390-1704 inserts 32 mm shank diameter for stable clamping 55 mm effective cutting length Three cutting edges with 90° cutting angle Stable shank and geometry for consistent finishes The combination of a 32 mm shank and a balanced tool body provides mechanical stability that reduces deflection and vibration during milling. With a 90° cutting angle and three cutting edges, the cutter delivers a predictable contact zone that supports consistent surface quality and repeatable tolerances. The reduced tool movement improves insert life and lowers rework rates, making this cutter suitable for repetitive finishing and light roughing operations where dimensional stability is essential. Simple insert compatibility and quick serviceability Designed specifically for R390-1704 indexable inserts and compatible with Sandvik plates, the cutter facilitates fast insert changes and straightforward tool inventory management. The clamping system uses a M3.5x8.5 Torx screw secured with a T15 key, enabling rapid replacement without specialised fixtures. This configuration reduces machine downtime and keeps maintenance cycles short, while preserving secure insert retention during higher feed operations. Workshop efficiency and integration into production With an effective cutting length of 55 mm and an overall length of 150 mm, the tool balances reach and rigidity for versatile set‑ups on milling heads and boring mills. The tool weight of approximately 0.854 kg contributes to predictable spindle loading and ease of handling during changeovers. Compatibility with a widely used insert format streamlines procurement and allows the cutter body to be paired with different grades of insert to match material and application demands. Quality supply and fit for series production The cutter body from Teknik Makina is built to integrate into established workflows and to be stocked alongside common insert ranges for rapid replacement. Sourcing via Metav Werkzeuge provides the advantage of a European distribution hub with an established quality filter, ensuring reliable delivery and consistent product checks. For operations that value supply chain transparency and dependable tool performance, this cutter body represents a pragmatic choice. For tailored advice on integrating Teknik Makina’s indexable shank cutter into an existing tool setup or for immediate availability information, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 — Metav’s specialists will recommend the best insert grades and delivery options Technical data Article number: S524TM Manufacturer: Teknik Makina Facts Shank diameter: 32 mm Effective cutting length: 55 mm Overall length: 150 mm Weight: 0.854 kg Cutting edges: 3 Cutting angle: 90° Special features Compatible with Sandvik R390-1704 indexable inserts Torx screw M3.5x8.5 for insert clamping Torx key size T15 required Brand: Teknik Makina FAQ What insert type does this shank cutter accept? The indexable shank cutter S524TM by Teknik Makina accepts R390‑1704 indexable inserts, a common Sandvik plate format for a variety of milling tasks. How is the insert secured in the cutter? Insert retention on the S524TM is achieved with a M3.5x8.5 Torx screw, tightened with a T15 key, allowing secure clamping and fast replacement of inserts. What are the key dimensions to consider for spindle mounting? Key dimensions are a 32 mm shank diameter, 55 mm effective cutting length, and an overall length of 150 mm; the cutter’s weight is 0.854 kg, which helps when planning tool overhang and balance. How many cutting edges does the tool have and what is the geometry? The tool features three cutting edges with a 90° cutting angle, optimised for stable contact and consistent surface results in standard milling applications. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Milling Cutter For RDMT 1003 Indexable Inserts, 3 Flutes 45mm Cutting Length - Teknik Makina
Compact, robust indexable-insert milling body with a 32 mm shank and 45 mm cutting length for stable, repeatable machining. Accepts RDMT 1003 indexable inserts and uses standard Torx clamping hardware for quick insert changes. Order the R214TM shank cutter directly via Metav Werkzeuge or ask our consultants if needed. R214TM shank cutter by Teknik Makina — Ø32 mm, 3 cutting edges The R214TM shank cutter is an indexable-insert milling body engineered for efficient face and shoulder milling with RDMT 1003 inserts, offering a blend of secure clamping and straightforward tool handling. 32 mm shank diameter for stable clamping 45 mm cutting length for deep shoulder milling Accepts RDMT 1003 indexable inserts Torx T15 clamping hardware specification Higher throughput through predictable tool geometry The tool body is designed to deliver consistent chip engagement thanks to its defined geometry and three cutting edges, which together support stable cutting conditions. With a 32 mm shank and 45 mm cutting length, the body provides a reliable contact area for holders and a cutting span suitable for many shoulder operations. Using indexable inserts reduces setup variability because each insert change restores the original cutting geometry, contributing to shorter make-ready times and more predictable cycle times. Fast reconditioning and simple maintenance Clamping is managed with a M3.5 clamping screw and a Torx screw (M3.5x8.5), which is compatible with a Torx T15 key, simplifying insert replacement and routine maintenance. This hardware arrangement allows rapid, repeatable tightening without specialised fixtures, reducing downtime during tool changes. The straightforward fastening concept also makes inventory management easier: standard replacement screws and a common Torx key are all that is required for service. Indexable-insert concept for economical operation As an indexable-insert milling body, the R214TM separates the cutting edge from the tool body, enabling the economical use of inserts and quick on-site edge refreshment. This approach lowers per-cutting-edge cost and shortens tool preparation compared with solid-end mills. The tool’s acceptance of RDMT 1003 format inserts ensures availability of insert grades and geometries across suppliers, aiding flexibility for different cutting tasks and extending the lifecycle of the milling body itself. Workshop integration and handling With an overall length of 200 mm and a total weight of 1.273 kg, the cutter is compact enough for conventional milling toolholders while being substantial enough to feel robust during handling. The defined shank diameter supports secure clamping in standard collets or holders rated for a 32 mm shank. For technical drawings, cutting data or to confirm holder compatibility, Metav Werkzeuge can provide the necessary documentation to integrate the tool into existing processes. Discuss application details and request CAD or cutting data from Metav Werkzeuge to optimise integration of the R214TM shank cutter into production workflows — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: R214TM Manufacturer: Teknik Makina Designation: Shank cutter for RDMT 1003 indexable inserts SKU: R214TM Weight: 1.273 kg Facts Diameter: 32 mm Shank diameter: 32 mm Cutting edges: 3 Cutting length: 45 mm Overall length: 200 mm Total weight: 1.273 kg Clamping screw: M3.5 Torx screw: M3.5x8.5 Torx key: T15 Special features Compatible with RDMT 1003 inserts Indexable-insert milling body Clamping screw M3.5 Torx screw M3.5x8.5 Torx key specification T15 FAQ Which inserts fit this milling body? The R214TM accepts RDMT 1003 indexable inserts; the tool body is prepared specifically for that insert format to ensure correct seating and clamping. What is the cutting length and how does it affect operations? The cutting length is 45 mm, which provides a balance between reach for shoulder milling and stiffness for stable cutting performance. What clamping hardware is specified for insert fixation? Clamping is performed with an M3.5 clamping screw and an M3.5x8.5 Torx screw; the corresponding key size is T15. What are the key dimensions to check for holder compatibility? Check the 32 mm shank diameter and the 200 mm overall length when selecting a compatible toolholder or collet system. How heavy is the tool and what does this mean for handling? The tool weighs 1.273 kg, which reflects a robust design suited to stable clamping and routine handling in a workshop environment. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Milling Cutter for RPMT 1204 Indexable Inserts Internal Coolant, 250mm - Teknik Makina
Take advantage of the combination of robust internal coolant, precise compatibility with RPMT 1204 indexable inserts, and the extended reach provided by the 250 mm overall length for reliable milling performance; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Teknik Makina R326-3TM — 32 mm indexable shank cutter with internal coolant The 32 mm shank cutter R326-3TM is an indexable milling tool designed for insert‑based face and shoulder milling where coolant delivery through the tool improves chip control and tool life. 32 mm shank for stable clamping Internal coolant for improved chip evacuation Compatible with RPMT 1204 indexable inserts 250 mm overall length for extended reach Consistent coolant delivery for longer tool life The integral internal coolant channel directs cutting fluid straight to the cutting zone, which reduces heat build‑up and supports continuous chip removal. For production environments this translates into more consistent tool life and fewer unscheduled tool changes. Engineers benefit from reduced thermal distortion of the workpiece and improved insert performance when the coolant is focused at the cutting edge. Precision compatibility with RPMT 1204 indexable inserts Designed specifically for RPMT 1204 indexable inserts and compatible with Korloy insert grades, the cutter accepts proven insert geometries for predictable cutting behaviour. Indexable inserts allow rapid recovery after wear by simple indexing or replacement of the insert, minimising downtime and keeping machining cycles efficient. The use of standard insert sizes simplifies inventory management. Stable geometry and reach for challenging set‑ups With a 32 mm shank diameter and 250 mm overall length, the tool balances rigidity and accessibility for deeper pockets or stepped components. A 50 mm cutting length provides sufficient engagement for common shoulder and face milling tasks without excessive overhang. The two cutting edges provide a compromise between metal removal rate and surface finish, making the tool suitable for medium‑to‑general purpose milling operations. Serviceability and assembly details for workshop use The cutter is supplied for secure fastening with M4x8.5 Torx screws and a T15 Torx key, enabling fast insert changes and repeatable clamping torque. This standardised fastening method reduces assembly errors and speeds up routine maintenance. Where insert geometry or grade selection is critical for material removal, replaceable insert systems keep the cutting head ready for rapid adaptation to different jobs. For reliable indexable milling with targeted coolant delivery, choose the Teknik Makina R326-3TM — contact Metav Werkzeuge for tailored advice or to arrange supply via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: R326-3TM Manufacturer: Teknik Makina Product type: Shank cutter Facts Diameter: 32 mm Overall length: 250 mm Shank diameter: 32 mm Cutting length: 50 mm Cutting edges: 2 Special features Compatible with RPMT 1204 indexable inserts Compatible insert manufacturer: Korloy Internal coolant: yes Torx key: T15 Torx screw: M4x8.5 ECLASS: 21180806 FAQ Which insert type does this cutter use? The cutter is configured for RPMT 1204 indexable inserts; Korloy insert grades are noted as compatible for the R326-3TM. Does the tool provide internal coolant? Yes, the tool features internal coolant to direct fluid to the cutting zone and aid chip evacuation. What are the main dimensions of the tool? The tool has a 32 mm diameter, 250 mm overall length and a 50 mm cutting length as listed for the R326-3TM. How many cutting edges and what fastening hardware are used? The cutter uses two cutting edges and is secured with M4x8.5 Torx screws, serviceable with a T15 Torx key. Is the tool suitable for deep pocketing or extended reach operations? The 250 mm overall length provides extended reach for deeper set‑ups while the 32 mm shank helps maintain rigidity; confirm specific process parameters with Metav Werkzeuge for optimal results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Milling Cutter for RPMW 10T3 Indexable Inserts, 4 Flutes - Teknik Makina
Take advantage of a robust, 32 mm cutting diameter combined with four cutting edges for consistent material removal and economic indexable-insert use; order directly via Metav Werkzeuge or consult the technical team for application advice. Shank cutter R319TM — Insert milling cutter, Ø32 mm, 4 cutting edges (Teknik Makina) The Shank cutter R319TM is an insert milling tool intended for RPMW 10T3 indexable inserts, offering a compact 125 mm overall length and a solid 32 mm shank for stable toolholding and predictable machining results Ø32 mm diameter for stable cutting Compatible with RPMW 10T3 indexable inserts Four cutting edges for efficient material removal Torx screw M3.5x8.5, T15 key specification Precision and stability for reproducible milling The R319TM delivers a stable machining platform through its 32 mm shank and a balanced overall length of 125 mm, which together reduce deflection and vibration in light to medium-duty milling operations. Fitted with four cutting edges, the design spreads cutting forces over multiple teeth, enabling a steadier cut and improved surface results. Using RPMW 10T3 indexable inserts keeps downtime low: worn edges are replaced rather than the whole tool, which supports continuous production and lowers per-part tooling cost. Compatibility with Korloy inserts provides flexibility when selecting grades and geometries for various materials. Efficiency and productivity tailored to workshop needs An insert-based cutter with four cutting edges increases material removal per revolution while maintaining acceptable tool life, improving throughput on repetitive tasks. The exchangeable insert system is advantageous in batch production where tool change speed matters; replacing an insert is faster than regrinding a solid tool, which helps maintain machine utilisation. The listed Torx fastening—M3.5x8.5 screw with T15 key—ensures secure insert clamping and straightforward service procedures, reducing maintenance complexity in the workshop. Clear compatibility and straightforward maintenance This cutter is specified for RPMW 10T3 inserts and documented as compatible with inserts from Korloy, which simplifies procurement and grade selection across different workpiece materials. The defined screw and key sizes support predictable maintenance cycles and safe insert seating. For operations seeking reliable supply and post-sale support, the product is offered via Metav Werkzeuge, a partner known for a broad portfolio and dependable logistics in Europe, which supports uninterrupted production planning. For procurement or machining advice on the Teknik Makina Shank cutter R319TM, contact Metav Werkzeuge in Emmerich for stock details and application support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: R319TM Name: Shank cutter (Schaftfräser) Application: for RPMW 10T3 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 32 mm Shank / mounting diameter: 32 mm Overall length: 125 mm Cutting edges: 4 Special features Compatible insert type: RPMW 10T3 Compatible insert manufacturer: Korloy Torx screw: M3.5x8.5 Torx key specification: T15 FAQ What insert type does this cutter accept? The cutter accepts RPMW 10T3 indexable inserts; the Shank cutter R319TM is specified for this insert geometry and matches Korloy insert standards. How many cutting edges are available on the tool? This insert milling tool is equipped with four cutting edges, which balance material removal and tool life for efficient machining. What are the key dimensions for toolholding? The R319TM has a 32 mm shank diameter and an overall length of 125 mm, providing a compact yet rigid configuration for stable clamping. Which screw and key are required for insert clamping? Insert clamping uses a M3.5x8.5 Torx screw and a T15 key, ensuring secure insert fixation and easy maintenance access. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shank Milling Cutter for RPMW 1204 Indexable Inserts, 3 Cutting Edges - Teknik Makina
Take advantage of the combination of reliable insert compatibility, a robust 32 mm shank and a three-edge cutting geometry for predictable material removal and low vibration; order via Metav Werkzeuge or consult the product specialists for application support. R326TM Shank milling cutter — for RPMW 1204 indexable inserts, 32 mm shank, 3 cutting edges (Teknik Makina) The R326TM shank milling cutter is a purpose-built tool for indexable-insert milling, optimised for production environments where repeatability and fast insert changes are essential. Compatible with RPMW 1204 inserts (Korloy) 32 mm shank diameter for stable clamping Three cutting edges for efficient chip removal Torx M4x7 screw with T15 key for secure fixation Predictable machining through standardised insert compatibility The tool accepts RPMW 1204 indexable inserts and is specified for inserts from Korloy, enabling fast, repeatable insert changes and straightforward stock management. Using a standard insert form reduces setup time and simplifies tool procurement; the combination of a recognised insert format and a dedicated cutter body helps maintain consistent cutting geometry across multiple operations. This compatibility supports predictable cycle times and easier process integration on CNC milling centres. Stable performance from a substantial shank and secure fixing With a 32 mm shank, the cutter offers increased rigidity compared with smaller-diameter holders, reducing deflection under load. The robust shank diameter, paired with a precise connection and a Torx M4x7 clamping screw tightened with a T15 key, ensures the insert seat remains secure during interrupted cuts and high-feed passes. The result is improved surface finish and longer tool life through reduced vibration and consistent cutting engagement. Efficient material removal with three cutting edges The cutter is equipped with three cutting edges, which balance chip load and cutting forces to enable steady material removal without excessive power draw. This geometry supports both slotting and peripheral milling tasks where throughput and surface quality matter. The three-edge solution delivers a pragmatic compromise between aggressive metal removal and stable cutting behaviour, particularly useful in batch production where repeatable results are required. Easy maintenance and workshop integration for minimal downtime Insert replacement is straightforward: the Torx M4x7 screw is a common workshop standard and the T15 key is widely available, allowing rapid servicing without specialised tools. The overall design, including an overall length of 160 mm and a nominal diameter of 32 mm, is suited to typical toolholding setups, simplifying spindle selection and storage. For operations seeking to reduce complexity, the standardised interface supports streamlined tooling lists and predictable maintenance intervals. For application advice or to secure the R326TM shank milling cutter from Teknik Cutting Tools, contact Metav Werkzeuge in Emmerich for technical consultation and reliable supply. Technical data SKU: R326TM Manufacturer: Teknik Makina Designation: for RPMW 1204 Indexable Inserts Core data Shank diameter: 32 mm Diameter: 32 mm Overall length: 160 mm Number of cutting edges: 3 Special features Compatible insert manufacturer: Korloy Suitable for: RPMW 1204 indexable inserts Torx screw: M4x7 Torx key size: T15 FAQ Which insert type fits this cutter? The R326TM shank milling cutter is designed for RPMW 1204 indexable inserts; Korloy inserts in this form are compatible. How is the insert secured in the cutter? Insert fixation uses a Torx M4x7 screw tightened with a T15 key to provide a reliable and repeatable clamp. What shank diameter is required in the spindle? The cutter has a 32 mm shank diameter, so a toolholder or spindle capable of accepting a 32 mm shank is required. How many cutting edges does the tool offer and what is the benefit? The cutter features three cutting edges, offering a balance of steady material removal and good surface finish suitable for production milling. Is the tool body suitable for quick insert changes in a production setting? Yes; the standard insert form and common Torx fastening allow quick insert changes and straightforward workshop maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shell Mill For ADKT 1505 Indexable Inserts 3 Flutes 60mm Cutting Length 150mm Overall - Teknik Makina
Combine rigid Ø32 mm shank, 60 mm cutting length and compatibility with ADKT 1505 indexable inserts for reliable, high-productivity milling. Order the tool directly via Metav Werkzeuge or consult the team for application-specific advice. Shaft Cutter S315TM – Ø32 mm, 3 cutting edges, for ADKT 1505 (Teknik Makina) The Shaft Cutter S315TM is a shank-mounted milling tool designed for industrial CNC work, built to accept ADKT 1505 indexable inserts and deliver stable material removal in demanding production environments. Three cutting edges for stable material removal Ø32 mm shank diameter for rigid clamping 60 mm cutting length for deeper engagement Compatible with ADKT 1505 inserts (ISCAR) Precision and rigidity for predictable metal removal The tool is engineered to prioritise rigidity and repeatable performance: the Ø32 mm shank and balanced three‑edge geometry reduce vibration and improve surface finish under load. With a solid overall length and robust construction, the cutter keeps cutting forces low and tool deflection predictable, which supports consistent part tolerances and longer insert life. This rational design makes the cutter suitable for serial production where process stability is essential. Fast insert changes and secure clamping for less downtime Compatibility with ADKT 1505 indexable inserts and the use of a Torx clamping screw streamline maintenance routines. The included screw specification M4x10 and key T15 enable secure fastening and repeatable seat location, reducing the risk of misalignment during insert changes. This arrangement shortens non-productive time and supports a consistent chip evacuation pattern, contributing to efficient cycle times and dependable machining results. Compact handling, reliable performance and workshop integration With a 60 mm cutting length, 150 mm overall length and a weight of 0.887 kg, the cutter balances reach and rigidity for many standard milling tasks. The three cutting edges distribute cutting loads evenly, improving feed stability and enabling higher effective metal removal rates under the right conditions. Specified dimensions and a clear compatibility profile make stock management and toolholder selection straightforward for procurement and production planners. Contact Metav Werkzeuge for tailored application advice and supply from Emmerich — their specialists can confirm fitment and delivery for industrial workflows Technical data Article number: S315TM Manufacturer: Teknik Makina Shaft diameter: 32 mm Cutting length: 60 mm Overall length: 150 mm Cutting edges: 3 Weight: 0.887 kg Compatible inserts: ADKT 1505 Compatible insert manufacturer: ISCAR Torx screw: M4x10 Torx key: T15 FAQ Which indexable inserts fit this cutter? The cutter accepts ADKT 1505 indexable inserts; the tool is supplied for use with ADKT 1505 inserts from ISCAR. How is the insert secured and which tool is required? Inserts are clamped with a Torx screw specified as M4x10, tightened using a T15 Torx key for secure, repeatable fixation. How many cutting edges does the tool have and what is the benefit? The tool has three cutting edges, which balance cutting forces to reduce vibration and improve surface finish during milling operations. What are the key dimensions relevant for toolholding and reach? Key dimensions: Ø32 mm shank diameter, 60 mm cutting length and 150 mm overall length, which guide holder selection and reach planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shell Mill For LNMT 0804 Indexable Inserts, 5 Cutting Edges, 40mm Cutting Length - Teknik Makina
Take advantage of the 32 mm shank, compatibility with LNMT 0804 indexable inserts and a five-edge geometry for stable, efficient milling; order via Metav Werkzeuge or consult our technical advisors for specification matching. S303-1TM shank milling cutter — 32 mm shank • 5 cutting edges (Teknik Makina) The S303-1TM is a precision shank milling cutter engineered for use with LNMT 0804 indexable inserts, designed for stable face and shoulder milling in industrial and workshop environments. 32 mm shank for secure spindle fit Accepts LNMT 0804 indexable inserts Five cutting edges for balanced cuts Torx M2.5x7 fastening with T8 key Stable machining through robust design and compatibility The S303-1TM combines a 32 mm shank with a secure connection diameter of 32 mm, which ensures positive seating in standard toolholders and minimises runout. The body is specified for LNMT 0804 indexable inserts, a widespread insert form that provides predictable cutting behaviour and allows quick insert changes. Because the cutter accepts industry-standard inserts and is compatible with ISCAR plates, tool inventory can be standardised across production lines, reducing set-up time and simplifying reconditioning procedures for machining centres and milling heads. Productivity gains from five-edge geometry and well-defined cutting length Equipped with five cutting edges, this cutter delivers a balanced cutting action that reduces vibration and supports consistent surface finish during medium-duty milling operations. The 40 mm cutting length and the overall 150 mm length combine to offer a generous engagement zone while keeping the tool assembly compact enough for typical shop setups. The geometry supports efficient chip evacuation and steady feed rates when inserts are selected for the application, improving cycle stability and helping to maintain throughput without unexpected stoppages. Secure clamping and straightforward maintenance Assembly is simplified by an M2.5 fastening arrangement: the indexable plate is secured with an M2.5x7 Torx screw, tightened using a T8 key. This common fastening standard permits rapid insert replacement and consistent clamping torque when maintained with a calibrated driver. The tool’s mass of 0.978 kg contributes to inertial stability in the spindle, aiding in resistance to chatter during interrupted cuts. Routine checks and fast insert swaps can therefore be performed quickly, keeping machine downtime to a minimum. Designed for workshop reliability and versatile applications Built by Teknik Makina for professional use, the cutter is suitable for job shops and production environments that rely on indexable tooling to control tooling costs and cycle time. The combination of a standard shank diameter, compatibility with ISCAR inserts and the LNMT 0804 plate form means the cutter can be integrated into existing toolsets with minimal adaptation. The result is a dependable insert milling solution that supports reproducible results across repeated batches and varied component geometries. Contact Metav Werkzeuge for a technical consultation on integrating the Teknik Makina S303-1TM into current tooling systems — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: S303-1TM Manufacturer: Teknik Makina Compatible inserts: LNMT 0804 Indexable Inserts Compatible insert manufacturer: ISCAR Torx screw: M2,5x7 Torx key: T8 Facts Shank diameter: 32 mm Cutting length: 40 mm Overall length: 150 mm Number of cutting edges: 5 Weight: 0.978 kg Connection diameter (aufnahme): 32 mm Special features Accepts LNMT 0804 indexable inserts Compatible with ISCAR inserts Secured by M2.5x7 Torx screw Requires T8 Torx key for insert changes Brand: Teknik Makina SKU: S303-1TM FAQ What inserts fit this cutter? The cutter is specified for LNMT 0804 indexable inserts; compatible plates from ISCAR are suitable and commonly used with this tool. What is the shank diameter and how does it affect fit? The tool features a 32 mm shank and a 32 mm connection diameter, ensuring secure seating in matching collets or toolholders and reducing runout risk during milling cycles. How many cutting edges does the tool have and what is the benefit? This milling cutter has five cutting edges, which improves balance and contributes to steady cutting action and enhanced surface finish in routine operations. Which torque fastener is required for insert changes? Insert plates are clamped with an M2.5x7 Torx screw and are serviced using a T8 Torx key for reliable and repeatable clamping. Is this cutter suitable for heavy-duty roughing? The S303-1TM is designed for stable, medium-duty milling with indexable inserts; suitability for heavy-duty roughing depends on insert grade, machine power and fixture rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shell Mill For P32 Indexable Inserts, 66mm Cutting Length, 200mm Overall - Teknik Makina
Take advantage of the combination of industrial rigidity and easy insert replacement: the robust 32 mm shank and 66 mm cutting length allow deeper, more stable cuts while indexable P32 tips reduce downtime and tooling costs. Order or request specification support via Metav Werkzeuge for fast, reliable supply and expert consultation. S382TM Shank Milling Cutter – 32 mm shank, for P32 indexable inserts (Teknik Makina) The S382TM shank milling cutter is engineered for demanding milling tasks with P32 indexable inserts, delivering the rigidity and reach required for reliable production machining. 32 mm shank diameter 66 mm cutting length Compatible with Walter P32 inserts M8 Torx screw, 4 Allen key supplied Improved stability for higher material removal rates The design centres on a 32 mm shank, which increases rigidity and reduces tool deflection during heavy cuts. This stability translates into a steadier tool path and better surface finish on the workpiece, especially when machining deeper pockets or larger step-downs. By favouring axial stiffness over a slender profile, the cutter supports higher material removal rates with lower risk of chatter, helping to maintain cycle times and process reliability in production environments. Fast insert changes and reduced downtime Equipped to accept P32 indexable inserts, the cutter allows rapid tip replacement without the need for full regrinding. The insert is secured by an M8 Torx fixing; an Allen key size 4 is supplied for quick access. Compatibility with established insert types such as Walter P32 reduces inventory complexity: one shank tool can be kept in service while inserts are rotated or stocked as consumables, lowering per-part tooling cost and simplifying tool management in the workshop. Extended reach and industrial readiness for versatile milling With a 66 mm cutting length and 200 mm overall length, this shank tool provides the reach required for mid-depth operations while preserving stiffness. The unit weight of 1.15 kg reflects a solid construction that suits both roughing and semi-finishing tasks where robust handling is essential. As a purpose-built shank milling cutter, it integrates into standard toolholders and is appropriate for a range of production scenarios where indexable inserts offer a cost-effective balance between performance and serviceability. For tailored technical advice or to secure reliable supply of the Teknik Makina S382TM shank milling cutter, contact Metav Werkzeuge for consultation and ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: S382TM Manufacturer: Teknik Makina Product designation: Shank milling cutter for indexable inserts Compatible inserts: P32 32 Suitable insert manufacturer: Walter Core data Shank diameter: 32 mm Cutting length: 66 mm Overall length: 200 mm Weight: 1.15 kg Special features For P32 indexable inserts Compatible with Walter P32 plates M8 Torx fixing Supplied with Allen key size 4 Shank milling cutter configuration FAQ Which inserts fit this cutter? The S382TM accepts P32 indexable inserts, making it compatible with common P32 plate geometries used in industrial milling. How is the insert secured in the cutter? The insert is fastened with an M8 Torx screw; the cutter is supplied with an Allen key size 4 for secure, repeatable clamping. Can the cutter be used with Walter inserts? Yes, the tool is specified as compatible with Walter P32 insert plates, allowing straightforward integration with those consumables. What machining tasks is this cutter best for? The tool’s 32 mm shank and 66 mm cutting length make it suitable for mid-depth roughing and semi-finishing where indexable inserts are preferred for economy and quick changeovers. Is the tool ready for use in a production environment? The S382TM is produced with a robust shank and proven fixing method to support repeated insert changes and continuous operation in industrial settings. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Shrink Fit End Mill for LNMX 0603 Indexable Inserts With Internal Coolant, 250mm L - Teknik Makina
Benefit from the combination of a 32 mm shank, internal coolant and compatibility with LNMX 0603 indexable inserts to achieve stable, high-productivity milling and reduced downtime; order the indexable shank milling cutter directly via Metav Werkzeuge or contact our advisors for application support. Indexable Shank Milling Cutter S288TM – 32 mm shank, internal coolant (Teknik Makina) The Indexable Shank Milling Cutter for LNMX 0603 indexable inserts is designed for robust face and shoulder milling in production and jobbing environments, combining secure clamping with efficient chip control. 32 mm shank diameter Internal coolant for improved chip control Compatible with LNMX 0603 / Korloy inserts Five cutting edges for stable machining Consistent cutting performance for production milling The S288TM is built to deliver reliable stability on long tool overhangs by using a substantial 32 mm shank and a multi-edge cutter geometry. The combination of a rigid shank and five cutting edges reduces vibration and evens out cutting forces, which helps to maintain surface finish and dimensional accuracy in repetitive operations. In practical terms, this means fewer rejects, less rework and more predictable cycle times—advantages that directly support production planning and throughput. Fast indexable system for reduced downtime Compatibility with LNMX 0603 indexable inserts and recognised manufacturers such as Korloy makes insert changes quick and reproducible. Indexable technology allows worn edges to be rotated or replaced without regrinding a whole tool, significantly shortening downtime between operations. The tool’s insert interface is engineered for repeatable seating, ensuring that each insert index restores cutting geometry so that replacement is a process improvement rather than a production interruption. Internal coolant for longer tool life and process security Direct internal coolant supply to the cutting zone improves lubrication and chip evacuation, lowering cutting temperatures and preventing built-up edge. The result is extended insert life and more consistent cutting performance under higher feed or depth-of-cut conditions. For shops aiming to increase metal removal rates while preserving component integrity, the internal coolant channel supports more aggressive strategies without sacrificing process stability. Practical setup and secure clamping for workshop use Designed with everyday workshop handling in mind, the cutter uses an accessible Torx fixing (T8) and M3x7 screw for secure insert clamping and straightforward maintenance. The stated overall length and cutting length provide flexibility for a range of set-ups, while the tool’s mass helps to dampen chatter in interrupted cuts. These pragmatic details simplify changeover procedures and enhance operator confidence during series production and single-part machining alike. Discuss the Teknik Makina S288TM with Metav Werkzeuge to determine the optimal insert and clamping configuration for the application and secure assured supply from our Emmerich distribution. Technical Data Article number: S288TM Manufacturer: Teknik Makina ECLASS: 21180806 Core Data Diameter: 32 mm Shank diameter: 32 mm Overall length: 250 mm Cutting length (shank/edge): 100 mm Number of cutting edges: 5 Weight: 1.2 kg Special Features Internal coolant: yes Suitable for indexable inserts: LNMX 0603 Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M3x7 Category path: Zerspanen > Schaftfräser FAQ Which insert type fits this cutter? The cutter accepts LNMX 0603 indexable inserts; compatibility with Korloy inserts is specified for straightforward procurement and interchangeability. Can the tool be used with through-coolant on standard milling machines? Yes, the internal coolant channel of this indexable shank milling cutter is intended to be supplied from a suitable machine coolant line to improve chip evacuation and tool life. What advantages do five cutting edges offer in production? A five-edge cutter balances cutting forces and increases material removal per revolution, giving the indexable cutter smoother cutting behaviour and longer effective tool life compared with fewer-edge alternatives. Is special tooling required for insert changes? Insert changes are performed using a T8 Torx key and the specified M3x7 screw; no specialised axial tools are required beyond standard workshop hex/Torx tooling. What should be considered for clamping and overhang? Maintain the shortest practical overhang and secure clamping on a compatible 32 mm holder to preserve rigidity; the tool’s design supports production stability when clamping recommendations are observed. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Solid Carbide End Mill For ANKX 1205 Indexable Inserts, 3 Flutes 40mm Cutting Length - Teknik Makina
Take advantage of the combination of 32 mm shank diameter, three cutting edges and compatibility with ANKX 1205 indexable inserts for a reliable and economical milling routine; order the shank milling cutter directly via Metav Werkzeuge or ask the consultants if needed. Shank milling cutter for ANKX 1205 indexable inserts — Teknik Makina The shank milling cutter by Teknik Makina is a robust indexable-insert cutter intended for industrial milling applications where rapid insert replacement and steady cutting forces are required. 32 mm shank diameter for high rigidity Three cutting edges for consistent material removal Compatible with ISCAR ANKX 1205 indexable inserts Fast clamping with M4x11 Torx screw (T15) Stable cutter body that reduces vibration and secures insert life The tool’s 32 mm shank diameter and compact overall design deliver increased torsional stiffness and improved run-out behaviour, which supports steady cutting forces and a reliable machining result. With three cutting edges, the cutter provides uniform chip engagement and contributes to even wear across inserts; this extends the intervals between index changes and reduces unplanned stoppages. The design focus on stability makes the tool suitable for repetitive milling tasks in workshop and production environments where process consistency is critical. Short overhang and defined cutting length for repeatable set-ups A measured cutting length of 40 mm combined with a total length of 120 mm yields a practicable balance between accessibility and rigidity. The specified geometry promotes predictable tool engagement and easier cycle setup, helping to maintain a consistent chip load across workpieces. The modest mass (approx. 0.7 kg) supports controlled acceleration during tool changes and aids in achieving reproducible results across shifts, which is beneficial for batch production and fixture-based processes where identical results are required from part to part. Quick insert handling and standardised clamping for efficient maintenance Compatibility with ANKX 1205 indexable inserts standardises the consumable inventory and simplifies replenishment. Insert retention is secured with an M4x11 Torx screw operated with a T15 key, enabling fast and safe insert changes without special tooling. The use of common, widely available inserts minimises lead times for replacements and reduces overall tooling costs. Clear mechanical interfaces and standard fastening reduce handling errors, shorten maintenance windows and keep machine uptime high. For availability, technical clarification or procurement of the Teknik Makina shank milling cutter (SKU S695TM), contact Metav Werkzeuge in Emmerich to discuss suitability and delivery: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: S695TM Brand: Teknik Makina Product: Shank milling cutter for ANKX 1205 indexable inserts Dimensions & weight Shank diameter: 32 mm Cutting length: 40 mm Overall length: 120 mm Number of cutting edges: 3 Weight: 0.7 kg Compatibility & fastening Compatible inserts: ANKX 1205 Compatible insert manufacturer: ISCAR Torx screw: M4x11 Torx key: T15 FAQ Which inserts fit this cutter? This shank milling cutter accepts ANKX 1205 indexable inserts; the cutter is delivered as a body to be fitted with the specified inserts from manufacturers such as ISCAR. What secures the inserts in place? Inserts are fastened using an M4x11 Torx screw that is tightened or released with a T15 key for swift and secure clamping. What are the main dimensions to consider for fixture planning? Key dimensions are a 32 mm shank diameter, a 40 mm cutting length and a 120 mm overall length, which are relevant for collet selection and reach planning. Is the cutter suitable for serial production where quick insert changes are required? Yes, the standardised interface for ANKX 1205 inserts and the common Torx fastening enable rapid insert replacement and support efficient maintenance cycles. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Solid Carbide End Mill For APMT 0602 Indexable Inserts, 8 Flutes 90° Cutting Angle - Teknik Makina
Take advantage of the combination of rigid 32 mm shank, compatibility with APMT 0602 inserts and robust 8‑edge cutting geometry for dependable high‑volume milling. Order the tool directly via Metav Werkzeuge or ask the consultants for application matching and tool selection. Indexable insert milling cutter S008TM – 32 mm shank, for APMT 0602 inserts (Teknik Makina) The Indexable insert milling cutter S008TM is an insert milling system engineered for industrial metalworking where quick insert changes and consistent machining results are required; suited to operations that standardise on APMT 0602 indexable inserts. *32 mm shank diameter for high rigidity *Compatible with APMT 0602 indexable inserts *8 cutting edges for stable material removal *Insert clamping with T6 torx screw M2x4.2 Superior rigidity for repeatable, precise cuts A robust 32 mm shank and substantial overall length deliver the mechanical stability needed for repeatable machining cycles. The tool’s construction reduces vibration and deflection during engagement, which translates into more consistent slot and face milling results and longer insert life. This stability provides a tangible productivity advantage in repetitive production runs, improving process reliability while helping to maintain machining tolerances under varying loads. Fast insert handling and secure clamping reduce downtime Compatibility with APMT 0602 indexable inserts and the Torx clamping design ensure secure fixation and straightforward change‑overs. The supplied clamping concept using a T6 key and M2x4.2 screw allows rapid replacement of worn inserts and secure seating for reliable cutting performance. Minimised set‑up time and simple maintenance routines support higher machine utilisation and a faster return to full cutting parameters after tool servicing. Designed for standardised workshops and industrial toolrooms This indexable milling solution is appropriate where shop floors favour standard insert geometries and modular tooling systems. The multi‑edge cutter reduces the number of tool changes compared with single‑edge solutions, while the insert system keeps spare stock management efficient. For procurement and toolroom planning, the S008TM aligns with modular tool strategies and supports predictable tool inventories for streamlined production logistics. For tailored tooling advice or to procure the Teknik Cutting Tools indexable milling cutter with 32 mm shank, contact Metav Werkzeuge — our specialists will recommend matching inserts and compatible holders to suit the application. Technical Data Article number: S008TM Manufacturer: Teknik Makina Suitable for inserts: APMT 0602 Compatible insert manufacturer: Korloy Torx key: T6 Torx screw: M2x4.2 Facts Shank diameter: 32 mm Overall length: 120 mm Cutting length: 35 mm Cutting edges: 8 Cutting angle: 90° Weight: 0.686 kg Special features Indexable insert milling cutter Compatible with Korloy APMT 0602 inserts Torx T6 clamping system SKU: S008TM FAQ What inserts fit this milling cutter? The S008TM is designed for APMT 0602 indexable inserts; Teknik Makina supplies the shank cutter to accept that insert geometry and compatible Korloy plates. How is an insert secured in the tool? Inserts are fixed with a Torx screw (M2x4.2) tightened using a T6 Torx key, providing secure clamping and consistent seating for the indexable inserts in the S008TM system. Can the cutter be used for heavy roughing operations? The combination of a 32 mm shank and an 8‑edge configuration offers good rigidity for demanding cycles; application limits depend on machine power, clamping, and chosen insert grade. Is the tool suitable for standard toolholders? The S008TM features a conventional shank diameter and overall dimensions (32 mm shank, 120 mm length) that suit common milling toolholders; verify holder clamping capacity against these dimensions. Where to get replacement screws or keys for insert changes? Spare Torx screws (M2x4.2) and a T6 key compatible with the S008TM are available through Metav Werkzeuge and typical industrial tooling suppliers. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Solid Carbide End Mill for RPMT 1204 Indexable Inserts with Internal Cooling, 190mm L - Teknik Makina
Robust milling performance combined with targeted chip control: the combination of a 32 mm cutting body with a shank Ø 25 mm and internal coolant delivers stable cuts and longer insert life. Order the cutter directly via Metav Werkzeuge or consult the specialists for application-specific advice. Schaftfräser R326-2TM – 32 mm milling cutter body with internal coolant by Teknik Makina The Schaftfräser R326-2TM is a 32 mm milling cutter body designed for use with RPMT 1204 indexable inserts, offering internal coolant and a compact 190 mm overall length for reliable, repeatable milling in workshop and industrial environments. 32 mm cutter body diameter Internal coolant for directed cooling Compatible with RPMT 1204 Korloy inserts Shank Ø 25 mm, total length 190 mm Durable geometry for consistent milling results The cutter body is engineered to convert insert performance into consistent part quality. With a shank Ø 25 mm and 32 mm body diameter, the design reduces vibration and improves stability during passes, which in turn increases dimensional accuracy and surface finish. The R326-2TM accepts RPMT 1204 indexable inserts, allowing straightforward grading of cutting grades and coatings for different workpiece materials while maintaining process reliability. Directed coolant for improved insert life and fewer interruptions Integrated internal coolant channels deliver cutting fluid close to the cutting edge, improving heat dissipation and aiding chip evacuation. This focused cooling reduces thermal load on the inserts and the cutter body, which supports longer tool life and fewer unplanned stops for tool changes. The internal supply is particularly beneficial where consistent coolant delivery is required to avoid heat-related wear in continuous or high-feed operations. Simple insert changes and proven compatibility reduces downtime Maintenance and insert replacement are straightforward: the body uses a Torx clamping system (key T15 and screw M4x8.5) that enables secure, repeatable seating of the inserts. Compatibility with Korloy RPMT 1204 insert grades offers wide choice for cutting conditions and materials. With a total length of 190 mm and a cutting length of 40 mm, the design balances reach with rigidity for many common milling set-ups, helping to keep cycle times predictable. Contact Metav Werkzeuge today for tailored application guidance and to secure Teknik Cutting Tools' R326-2TM milling cutter body with internal coolant for more reliable production runs Technical data SKU: R326-2TM Label: 32mm Schaftfräser RPMT 1204 L190mm mit Innenkühlung Manufacturer: Teknik Makina eClass: 21180806 Dimensions Diameter: 32 mm Total length: 190 mm Shank diameter: 25 mm Cutting length: 40 mm Cutting edges: 2 Features Internal coolant: yes Suitable for RPMT 1204 inserts Compatible insert maker: Korloy Torx key: T15 Torx screw: M4x8.5 FAQ Which inserts fit the cutter body? The R326-2TM accepts RPMT 1204 indexable inserts; Korloy RPMT 1204 grades are compatible and offer a wide range of cutting-edge materials. Is coolant supplied through the tool? Yes, the cutter body features internal coolant channels that deliver fluid directly to the cutting zone for enhanced cooling and chip control. What shank size and holder are required? The tool has a shank Ø 25 mm; use a clamping holder sized for a 25 mm shank and appropriate rigidity for the 190 mm overall length. Which fastening parts are required for insert changes? Insert clamping uses a Torx screw M4x8.5 tightened with a T15 key for secure and repeatable insert seating. For which applications is the cutter suited? The R326-2TM milling cutter body is suited to general milling tasks where RPMT 1204 inserts are specified, delivering stable performance and improved insert life thanks to directed cooling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Solid Carbide Shank Cutter for ADMT 1606 Indexable Inserts 3-Flute, 60mm Cutting Length - Teknik Makina
Take advantage of the combination of robust clamping, precise indexable-insert compatibility and straightforward maintenance for reliable production performance; order the cutter directly via Metav Werkzeuge or ask the Emmerich consultants for specification advice. S466TM Insert milling cutter by Teknik Makina — 32 mm shank, 3-edge design The S466TM is a shank-mounted indexable milling cutter designed for face and shoulder milling using ADMT 1606 indexable inserts 32 mm shank for rigid clamping 60 mm effective cutting length Compatible with ADMT 1606 inserts 90° cutting angle for square shoulders Consistent rigidity for accurate material removal The tool’s 32 mm shank and substantial overall length ensure stable clamping and minimal deflection during interrupted cuts, which supports consistent dimensional results across serial production. With a 60 mm cutting length, the cutter provides a balance between reach and stiffness, enabling reliable shoulder and face milling without excessive vibration. This combination reduces rework and increases first-pass yield, which benefits throughput and scheduling in production environments. Quick insert changes with secure fastening Designed for indexable inserts of the ADMT 1606 family, the cutter accepts standard inserts from Walter, simplifying stocking and replacement. The clamping system uses a Torx M4x10 screw tightened with a T15 key, allowing secure, repeatable fixation of each insert while keeping tool-change times low. Reduced downtime from fast insert replacement translates directly into higher machine availability and predictable cycle times on milling centres. Geometry tailored to square-shoulder and face milling A 90° cutting angle gives the cutter clean shoulder faces and precise corners, particularly valuable when producing mating surfaces or fixtures that require tight edge definition. The three cutting edges distribute cutting forces evenly, supporting steady chip formation and improved tool life under suitable cutting parameters. The tool’s balanced geometry is therefore a pragmatic choice for operations demanding accurate shoulder profiles and reliable surface quality. Practical considerations for integration and use The cutter’s mass—approximately 0.784 kg—and 150 mm overall length were configured to suit common toolholders while maintaining practical handling in tool rooms. Compatibility with ADMT 1606 inserts from established suppliers reduces the need for bespoke tooling inventories and simplifies procurement. For process planning, the 3-edge configuration supports stable cutting on medium-duty milling tasks; machining parameters should be adapted to machine rigidity and workpiece clamping to maximise performance. For production environments seeking predictable, repeatable shoulder and face milling, request the Teknik Makina S466TM through Metav Werkzeuge — contact the Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 for specification support Technical data Article number: S466TM Manufacturer: Teknik Makina Product: Shank-mounted milling cutter for ADMT 1606 indexable inserts Shank diameter: 32 mm Cutting length: 60 mm Overall length: 150 mm Number of cutting edges: 3 Weight: 0.784 kg Compatible inserts: ADMT 1606 Recommended insert supplier: Walter Torx screw: M4x10 Torx key size: T15 FAQ What inserts fit this insert milling cutter? The cutter is made for ADMT 1606 indexable inserts; inserts from Walter are listed as compatible and are commonly used in this holder. How is the insert clamped and which tool is required? Inserts are secured with a Torx M4x10 screw tightened using a T15 key for secure, repeatable clamping of each insert. Which machining tasks suit this cutter best? The cutter is optimised for square-shoulder and face milling applications where a 90° cutting angle and controlled cutting length are required. Is the S466TM suitable for high-production environments? Yes — the 32 mm shank and balanced three-edge geometry provide rigidity and stable chip control suited to serial production when combined with adequate machine and fixture support. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Solid End Mill For APMT 11T3 Indexable Inserts 4 Flutes, 90° Cutting Angle, 40mm Cutter Length - Teknik Makina
Take advantage of the combination of 32 mm shank rigidity, a 40 mm effective cutting length and quick indexable insert changes for consistent production results; order the tool directly via Metav Werkzeuge or consult our advisors for application support. S240TM Shank Milling Cutter — 32 mm, for APMT 11T3 Indexable Inserts (Teknik Makina) The S240TM is a shank milling cutter designed for stable face and slot milling using APMT 11T3 indexable inserts, optimised for workshops and CNC environments where fast insert changes and rigidity matter 32 mm shank diameter for high rigidity Compatible with APMT 11T3 indexable inserts 40 mm effective cutting length Secured with M2.5×5.5 Torx screw Engineered stability for precision machining The design focuses on delivering stable cutting performance by combining a solid 32 mm shank with a balanced overall length of 125 mm. These dimensions reduce vibration and enable repeatable positioning in the tool holder, which contributes directly to improved surface finish and dimensional consistency. The geometry includes 4 cutting edges, permitting smoother engagement with the workpiece and distributing cutting forces more evenly; in practice this means fewer rejects and less rework when producing repeated features. The 90° cutting angle supports unified face milling and shoulder operations, making the tool a dependable choice where rigidity and repeatability are required. Indexable inserts for rapid tool change and lower running cost The cutter accepts APMT 11T3 indexable inserts, an established insert format that offers quick replacement and predictable cutting behaviour. Using indexable inserts reduces downtime: worn inserts are swapped in seconds without replacing the entire tool body, supporting continuous operation on production lines. The clamping is specified with a M2.5×5.5 Torx screw and a T8 key, ensuring a secure, repeatable seat for each insert change. This system is cost-efficient over time because insert stocking is cheaper than multiple solid cutters, and it simplifies tooling logistics in mixed-batch environments where flexibility and inventory control matter. Practical handling and workshop compatibility With a 40 mm effective cutting length and a modest mass of 0.764 kg, the cutter balances rigidity with manageable handling for manual set-up and automated tool changes alike. The nominal 32 mm diameter suits a wide range of tool holders and milling spindles used in small to medium CNC machines. Compatibility with Korloy-manufactured inserts has been noted, widening options for insert selection. For shop-floor teams, this translates to a reliable tool that integrates with standard insert inventories, reduces changeover complexity and supports both short production runs and longer series where consistent cut quality is essential. For production environments that prioritise rigidity and fast insert replacement, contact Metav Werkzeuge to discuss the S240TM from Teknik Makina and receive tailored application advice — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: S240TM Manufacturer: Teknik Makina Designation: Shank milling cutter for APMT 11T3 indexable inserts eClass: 21180806 ETIM: EC011860 Core technical data Diameter: 32 mm Shank diameter: 32 mm Effective cutting length: 40 mm Overall length: 125 mm Number of cutting edges: 4 Weight: 0.764 kg Cutting angle: 90° Special features Compatible inserts: APMT 11T3 Compatible insert manufacturer: Korloy Torx screw: M2.5×5.5 Torx key size: T8 Indexable insert system for fast changes FAQ What makes this cutter particularly stable in use? The S240TM achieves stability through its 32 mm shank and balanced overall length, which reduce vibration and provide consistent seating in the tool holder for improved surface finish. Which inserts fit the cutter? This shank milling cutter accepts APMT 11T3 indexable inserts; compatibility with Korloy inserts is specified, allowing selection from established insert grades. How are inserts secured to the cutter? Inserts are fastened using an M2.5×5.5 Torx screw; the corresponding key size is T8, ensuring a repeatable and secure clamping position. Is the cutting length suitable for face and slot milling? The tool offers a 40 mm effective cutting length, which supports both shallow face milling and moderate-depth slotting where a stable tool body is required. What are the key dimensions to check before ordering? Important dimensions are 32 mm diameter, 40 mm cutting length and 125 mm overall length; confirming toolholder clearance and spindle compatibility is recommended. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
32mm Solid Shank Cutter for APMT 11T3 Indexable Inserts, 4 Flutes, Internal Coolant - Teknik Makina
Take advantage of the internal coolant and 32 mm shank to achieve stable clamping and extended insert life; secure the S242-1TM via Metav Werkzeuge for fast supply from Emmerich or consult our specialists for configuration advice. 32 mm Shank Milling Cutter S242-1TM — for APMT 11T3 indexable inserts, internal coolant (Teknik Makina) 32 mm Shank Milling Cutter S242-1TM is a robust milling cutter body designed for indexable inserts and medium‑to‑long reach milling tasks in industrial production. Internal coolant for improved tool life 32 mm shank diameter for stable clamping Compatible with APMT 11T3 Korloy inserts Overall length 180 mm for extended reach Optimised coolant feed for consistent cutting performance The integrated internal coolant channel delivers cutting fluid directly to the cutting zone, which supports reliable chip evacuation and prevents premature insert wear. By reducing heat at the cutting edge, the coolant channel helps to extend insert life and maintain consistent surface finish across batch runs. This design reduces downtime associated with frequent insert changes and contributes to steady productivity in repetitive milling operations. Rigidity and repeatability for precision machining A 32 mm shank combined with a solid L180 mm body delivers the rigidity required for repeatable results in shopfloor milling. The stable clamping geometry minimises vibration and deflection, enabling tighter tolerances and more predictable tool life. With four cutting edges, the cutter body provides balanced cutting forces that support smoother passes and consistent dimensional accuracy, particularly in stepped or face milling tasks where stability is essential. Straightforward insert handling and maintenance The cutter accepts APMT 11T3 indexable inserts and is supplied with fasteners sized M2.5x6.5, tightened with a T8 Torx key for secure seating. Compatibility with Korloy inserts offers a wide aftermarket choice and simplifies stocking of spare inserts. The arrangement permits quick indexation and replacement, reducing machine downtime and helping to keep production flowing without complex service procedures. Designed for production environments and procurement efficiency With an overall length of 180 mm and a cutting shank length of 50 mm, the tool is engineered for applications that require reach without sacrificing stiffness. The cutter’s weight and dimensions suit robust toolholders and standard tool management systems, while the compatibility with widely used APMT inserts assists procurement by aligning with common inventory items. Combine these attributes to reduce complexity at the tool crib and to improve process reliability across a range of milling operations. Contact Metav Werkzeuge to specify the Teknik Cutting Tools 32 mm shank milling cutter S242-1TM with internal coolant for your application or to arrange supply directly from our Emmerich stock—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: S242-1TM Label: 32mm shank milling cutter APMT 11T3 L180mm with internal coolant Manufacturer: Teknik Makina ECLASS: 21180806 Core specifications Diameter: 32 mm Overall length: 180 mm Shank diameter: 32 mm Cutting length (shank): 50 mm Cutting edges: 4 Weight: 1.123 kg Special features Internal coolant: yes Compatible inserts: APMT 11T3 Compatible insert manufacturer: Korloy Torx key: T8 Screw: M2.5x6.5 Product type: Shank milling cutter FAQ Which inserts fit this cutter? The cutter accepts APMT 11T3 indexable inserts; use Korloy or equivalent APMT 11T3‑type inserts for best compatibility with the S242-1TM (Teknik Cutting Tools). Does the tool provide coolant through capability? Yes — the S242-1TM features internal coolant, which directs cutting fluid to the insert edge to support chip evacuation and improved insert life. What are the shank and overall dimensions? The tool has a 32 mm shank diameter and an overall length of 180 mm, with a shank cutting length of 50 mm, offering a balance of reach and rigidity. Which fastening parts are used for inserts? Insert screws are M2.5x6.5 and require a T8 Torx key for tightening; these make insert changes straightforward while ensuring secure clamping in the S242-1TM. Is this body suitable for heavy production use? Yes — the combination of a 32 mm shank, four cutting edges and internal coolant makes the cutter well suited to repeated production cycles where stability and consistent insert performance are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
High-performance shank cutters and ball nose cutters for efficient milling
Insert shank cutters and ball nose cutters combine flexibility and productivity for a wide range of milling tasks. The category covers steel-bodied shank cutters fitted with indexable inserts for economical roughing, face milling, cornering and slotting, as well as ball nose cutters for contouring and 3D finishing.
How these tools work and where they belong
Shank cutters with indexable inserts use a carrier body made from hardened steel; the cutting edges are provided by removable inserts rather than a solid tool blank. Where tools do not have internal coolant, process heat and chips are managed via external coolant nozzles or compressed air, which is sufficient for open, surface-level and easily accessible milling on standard materials. Shank cutters with internal coolant feature fine internal channels that deliver coolant or blasting air directly to each cutting edge under pressure. This targeted supply is essential for deep pockets, cavities, full slotting and machining of heat-resistant or difficult-to-machine materials, because it prevents chip re-cutting, protects cutting edges from thermal overload and enables higher feed rates and improved surface quality.
Cut cycle times and reduce tooling costs
- Replaceable indexable inserts reduce consumable costs and shorten tool change time.
- Targeted internal coolant improves chip evacuation and extends insert life.
- Robust steel carrier bodies enable heavy-duty roughing without frequent tool replacement.
- Suitable for roughing, planing, corner milling and slot milling as well as precision 3D profiling with ball nose cutters.
A practical choice for purchasing and stocking tools
Metav brings a pragmatic purchasing advantage: a broad range of milling solutions is available from a single European quality hub. Metav’s focus on democratising precision means workshops benefit from a wide assortment, consistent quality control from Emmerich and steady supply — supported by decades of expertise and over 48,000 satisfied customers. Choose Metav for a centralised sourcing strategy that reduces supplier complexity while keeping access to both insert milling cutters (also referred to as insert milling cutters or indexable end mills) and ball nose cutters (also known as ball nose end mills or radius cutters) straightforward.
Quick summary
Insert shank cutters and ball nose cutters deliver flexible, cost-effective milling: replaceable inserts lower running costs, and internal coolant options enable higher performance and longer tool life where chip control is critical.
FAQ
When should I choose a shank cutter with indexable inserts rather than a solid carbide end mill?
Choose shank cutters with indexable inserts for economical roughing and high-stock-removal tasks where replacing inserts is preferable to replacing an entire tool; they are especially effective for face milling, cornering and slotting operations.
Does internal coolant make a measurable difference for ball nose cutters?
Yes. Internal coolant directed to each cutting edge reduces chip re-cutting and thermal stress, which improves surface finish and increases insert life when machining deep pockets, cavities or heat-resistant materials.
Can shank cutters without internal coolant be used for general workshop milling?
Absolutely. Tools without internal coolant rely on external coolant nozzles or compressed air and are well suited to open, superficial and easily accessible milling on standard materials.
What milling operations are shank cutters for indexable inserts typically used for?
Shank cutters with indexable inserts excel at economical roughing, planfräsen (face milling), corner milling and slot milling; ball nose cutters are the preferred choice for 3D profiling and finishing operations.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com