Efficient shaft cutters and ball nose cutters for versatile milling
Shaft cutters and ball nose cutters serve as robust rotating tools for roughing, face milling, corner milling and slotting, offering economical replacement of indexable inserts rather than whole solid tools. Available in versions with internal coolant to feed lubricant directly to each cutting edge or without internal coolant relying on external nozzles, these cutters ensure effective chip evacuation and thermal control suited to standard materials or deep pocket and cavity work. By preventing chip re-cutting and protecting cutting edges, they deliver higher feed rates, improved surface finish and extended tool life in demanding metalworking applications.
15mm Shank Cutter For RDMW 0702 Indexable Inserts, 2 Flutes 150mm - Teknik Makina
Combine precision machining with straightforward maintenance and reliable compatibility with RDMW 0702 indexable inserts to keep production steady; order the shank milling cutter directly via Metav Werkzeuge or speak with our consultants for application advice. Shank milling cutter R143TM by Teknik Cutting Tools — for RDMW 0702 indexable inserts, 15 mm diameter A robust shank milling cutter for RDMW 0702 indexable inserts engineered for short- to medium-reach milling tasks in production and maintenance environments Compact 15 mm cutting diameter 16 mm solid shank for stable clamping Compatible with RDMW 0702 indexable inserts Quick insert fastening with Torx M2.5x5.5 Consistent removal rates with indexable inserts The insert-equipped cutter delivers repeatable chip removal by combining a small-diameter body with replaceable cutting edges. The use of indexable inserts such as RDMW 0702 reduces downtime: worn edges are replaced rather than the whole tool, conserving inventory costs and improving throughput. With 2 cutting edges, the tool balances chip evacuation and feed rate for efficient material removal, making it suitable for general milling tasks where predictable cycle times and easy edge changes are priorities. Stable clamping and dimensional control for accurate setups A 16 mm shank and a compact overall geometry enhance rigidity at the spindle interface, which lowers vibration and improves surface quality. The tool’s geometry — 15 mm diameter, 50 mm cutting length and 150 mm overall length — is optimised for short overhangs where run-out and deflection must be minimised. The secure insert fastening via Torx M2.5x5.5 screw (Torx key T8) ensures repeatable seating of each insert, supporting consistent part tolerances and longer effective tool life. Practical maintenance and compatibility in daily production Designed for rapid maintenance, the cutter accepts indexable inserts that are easily changed with the supplied screw profile. Compatibility with Taegutec inserts widens sourcing options for replacement edges and grades. The lightweight construction (approx. 0.228 kg) simplifies handling during tool changes and reduces stress on toolholders when paired with standard clamping systems. For workshops that need flexibility, an insert system provides economical renewal of cutting geometry without complex regrinding. Suited to workshop and industrial use with clear logistics The tool is presented as a practical solution for workshops and small-batch production where reliable consumable management is important. Produced by Teknik Cutting Tools and listed as R143TM, the cutter integrates into established insert programmes and benefits from Metav’s supply chain: central European stock and predictable delivery reduce lead times and procurement complexity. For operations seeking a balance of affordability, serviceability and consistent machining performance, this indexable-insert cutter offers a straightforward option. Contact Metav Werkzeuge for tailored application advice and reliable supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 — specialists can advise on the R143TM shank milling cutter and compatible inserts Technical data SKU: R143TM Manufacturer: Teknik Makina Type: Shank milling cutter for RDMW 0702 indexable inserts Facts Cutting diameter: 15 mm Shank diameter: 16 mm Cutting length: 50 mm Overall length: 150 mm Weight: 0.228 kg Number of cutting edges: 2 Torx screw: M2.5x5.5 Torx key: T8 Special features Compatible inserts: RDMW 0702 Compatible insert manufacturer: Taegutec Files available: 62de7e4ebd24461b3d5f7a28, 62de7ee4a9cff922f4703d51 Brand listing: Teknik Cutting Tools (R143TM) FAQ Which inserts fit this cutter? The shank milling cutter is specified for RDMW 0702 indexable inserts; compatible grades from Taegutec can be used depending on the workpiece material and machining strategy. What are the key dimensions to check before setup? Important dimensions are 15 mm diameter, 16 mm shank, 50 mm cutting length and 150 mm overall length; these determine reach, clamping requirements and allowable overhang for stable machining. Which screw and key are required for insert fastening? Insert clamping is performed with a Torx screw M2.5x5.5 and tightened using a T8 Torx key to achieve secure and repeatable seating of the inserts. Who manufactures and supplies this tool? The cutter is produced by Teknik Cutting Tools and marketed under SKU R143TM; Metav Werkzeuge is the listed responsible distributor for European supply. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
15mm Shank Cutter for SPMG 0502-0904 Indexable Inserts, 2 Flutes 40mm Cutting Length, 16mm Shank Diameter - Teknik Makina
Combine compact dimensions with reliable insert compatibility for efficient milling: the combination of a Ø15 mm cutting diameter, 16 mm shank and support for SPMG indexable inserts ensures low downtime and consistent results. Order the S818TM directly via Metav Werkzeuge or consult our experts for tailored advice. S818TM Shank milling cutter – Ø15 mm cutting diameter, 16 mm shank (Teknik Makina) The S818TM is a shank milling cutter designed for use with SPMG 0502–0904 indexable inserts, offering a compact solution for precision slotting and face milling in workshop and light industrial environments Ø15 mm cutting diameter, 2 cutting edges 16 mm shank for secure toolholding 40 mm effective cutting length Compatible with SPMG 0502–0904 inserts Stable, compact design for reliable machining The shank mill is engineered to deliver repeatable results through a compact geometry and a 16 mm shank that reduces run-out and vibration in standard toolholders. With a Ø15 mm cutting diameter and 2 cutting edges, the tool balances material removal rate and stability, making it suitable for finishing and light-roughing operations. The modest weight supports easy handling while maintaining machining accuracy, so machining cycles run smoothly and setup times remain short. Indexable insert system for rapid servicing Designed around an indexable system, this cutter accepts SPMG 0502–0904 inserts, allowing quick insert changes instead of complete tool replacement. The insert clamping uses an M2.2x5 Torx screw with a T7 key, ensuring secure fixation and straightforward maintenance. For users unfamiliar with indexable cutters: the replaceable carbide tips provide the cutting edge while the body retains stability, which lowers running costs and expedites workshop turnaround. Practical dimensions that integrate easily into existing setups With a 40 mm cutting length and 120 mm overall length, the tool fits common holder configurations without compromising accessibility in tighter fixtures. The 16 mm shank diameter enables strong clamping force in standard collets or shrink-fit holders, while the tool’s balance of length and diameter supports controlled chip evacuation. Compatibility with Taegutec inserts further widens the choice of grades and geometries for different materials and cutting strategies. Contact Metav Werkzeuge for an application review of the S818TM and to confirm the optimal insert grade and holder setup for specific machining tasks — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: S818TM Manufacturer: Teknik Makina Item designation: Shank milling cutter for SPMG 0502–0904 indexable inserts Facts Diameter: 15 mm Shank diameter: 16 mm Effective cutting length: 40 mm Number of cutting edges: 2 Overall length: 120 mm Weight: 0.186 kg Special features For SPMG 0502–0904 indexable inserts Compatible with Taegutec inserts Torx screw M2.2x5 Torx key size T7 FAQ Which inserts fit this shank milling cutter? The S818TM is specified for SPMG 0502–0904 indexable inserts; compatible grades from Taegutec are commonly used with this cutter. What toolholder is required for secure clamping? A standard holder accepting a 16 mm shank provides the required clamping force and concentricity for the S818TM shank milling cutter. How is the insert fixed in place? The insert is secured with an M2.2x5 Torx screw tightened with a T7 key to ensure stable fixation during milling. Is this cutter suitable for heavy roughing? The S818TM, with its Ø15 mm diameter and two cutting edges, is optimised for precision slotting and finishing; heavy roughing may require a larger, more robust tool geometry. What are the key dimensions to check before ordering? Confirm the 15 mm cutting diameter, 16 mm shank, 40 mm cutting length and 120 mm overall length to ensure compatibility with the machine and holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Chamfer Mill for SOMT 11T3 Indexable Inserts 45° 20mm Shank 50mm Cutting Height 110mm Overall Length - Teknik Makina
Take advantage of the robust combination of precise geometry and secure clamping to reduce rework and keep cycle times reliable; the 45° chamfer and generous cutting height deliver consistent results in serial production. Order via Metav Werkzeuge or consult the team for fitment questions and rapid dispatch. S770TM Chamfer Cutter — 45° chamfering tool for SOMT 11T3 indexable inserts (Teknik Makina) The S770TM chamfer cutter is a compact tool designed to produce repeatable 45° chamfers with SOMT 11T3 indexable inserts, suited to workshop and light production use where consistent edge preparation and short set-up times are required. 45° chamfer angle for consistent bevelling 20 mm precision shank for stable clamping 50 mm cutting height for deeper chamfers Compatible with SOMT 11T3 indexable inserts Consistent 45° chamfers that cut set-up time and rework The S770TM is built around a defined 45° chamfer geometry that produces uniform bevels across batches. That predictable geometry reduces the need for manual finishing and inspection, which in turn lowers scrap rates and shortens rework cycles. The tool is optimised for a single cutting edge configuration, offering a simple cutting action that is easy to understand and reproduce on manual and CNC equipment. The clear geometry also makes it straightforward to programme for automated machining or to verify with a process-controlled workflow. Stable mounting and extended cutting reach for higher throughput A 20 mm shank provides high rigidity in the holder, reducing chatter and improving surface quality; this stability is particularly important when taking deeper chamfers. With a 50 mm cutting height and an overall length of 110 mm, the cutter offers an extended reach that accommodates larger workpieces and set-ups where clearance is limited. The tool’s modest mass (approx. 0.26 kg) helps maintain balance at typical spindle speeds while keeping handling comfortable during tool changes. Together, these mechanical attributes support faster feeds and consistent cycle times without sacrificing finish quality. Indexable insert system for fast maintenance and predictable economics This cutter is designed for SOMT 11T3 indexable inserts, a standard format that allows rapid replacement of the cutting edge without regrinding the body. Compatibility with Palbit inserts means a wide choice of grades and chipbreaker geometries for different operational requirements. The insert is secured with an M4x11 Torx screw, tightened with a T8 key, which simplifies exchange and repeatable clamping torque. Using indexable inserts reduces tooling cost per edge and shortens downtime compared with solid tools, delivering a clear cost-benefit in serial production environments. Practical fit for workshops and production-focused toolrooms Designed for machine shops, maintenance departments and small production lines, this chamfering tool balances accessibility with industrial capability. The S770TM’s format makes it easy to integrate into existing tool inventories and to standardise chamfering across several machines. Combined with rapid dispatch and the broad catalogue available from Metav Werkzeuge, the cutter is a pragmatic choice for purchasers who prioritise reliable supply and a wide spare-part network. Clear technical specifications also make process qualification straightforward and support traceable, repeatable machining outcomes. For reliable 45° chamfering choose the Teknik Cutting Tools S770TM — contact Metav Werkzeuge in Emmerich for tailored advice and fast dispatch: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: S770TM Manufacturer: Teknik Makina Core Dimensions Diameter: 16 mm Shank diameter: 20 mm Cutting height: 50 mm Overall length: 110 mm Cutting edges: 1 Weight: 0.26 kg Chamfer angle: 45° Design & Features For SOMT 11T3 indexable inserts Compatible insert manufacturer: Palbit Torx screw: M4x11 Torx key size: T8 SKU: S770TM FAQ Which insert type fits this chamfer cutter? The S770TM accepts SOMT 11T3 indexable inserts; compatibility with Palbit grades broadens the choice of cutting materials and chip control solutions. How is the insert secured in the cutter? The insert in the S770TM is clamped with an M4x11 Torx screw, which is tightened using a T8 key to achieve repeatable clamping. What are the key dimensions to consider for toolholder selection? Key values for the S770TM are a 20 mm shank diameter, 16 mm cutter diameter, and 110 mm overall length — match those to the machine holder and available clearance. Is this tool suitable for deep chamfers? With a 50 mm cutting height, the S770TM accommodates deeper chamfering tasks while maintaining stable clamping for consistent results. What is the SKU and who manufactures this cutter? The tool is listed as S770TM and is produced by Teknik Makina (Teknik Cutting Tools), marketed via Metav Werkzeuge for European supply. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Cutter For 4NKT06 Indexable Inserts For 4NKT 0603, 25mm Cutting Length - Teknik Makina
Take advantage of a compact, robust toolholder that combines secure clamping with fast indexable-insert replacement; the compatibility with Taegutec 4NKT06 inserts and the 16 mm shank ensure reliable repeatability and short tool-change times. Order directly via Metav Werkzeuge or contact the specialists for consultation. Shank milling cutter for 4NKT 0603 indexable inserts — 16 mm shank, 2 cutting edges (Teknik Makina) A shank milling cutter designed for use with 4NKT 0603 indexable inserts, offering precise insert clamping and a compact overall length for efficient machining in small to medium CNC setups Compatible with Taegutec 4NKT06 inserts 16 mm shank diameter for secure clamping 2 cutting edges for efficient material removal 120 mm overall length with 25 mm cutting length Precision and fast reconditioning for indexable-insert workflows This shank milling cutter is engineered for efficient indexable-insert machining: by using indexable inserts such as the Taegutec 4NKT06, the cutter permits rapid insert changes and consistent cutting performance. The insert-based concept keeps tooling costs predictable while minimising downtime because individual cutting edges can be rotated or replaced without removing the entire toolholder. The result is measurable improvement in uptime and process stability, which supports higher productivity in serial production and jobbing environments. Stable clamping and predictable runout for repeatable results With a 16 mm shank and a compact 120 mm overall length, the design prioritises secure clamping and reduced overhang. The combination of a rigid shank and 2 cutting edges provides balanced cutting forces and helps to limit vibration during operation; this leads to improved surface finish and longer insert life. The cutting length of 25 mm offers sufficient engagement for common shoulder and face milling operations on multi-axis mills and machining centres. The insert is secured by a Torx screw M3x6,5, tightened with a T8 key, ensuring repeatable clamp torque and safe retention under typical cutting loads. Practical handling, supply and qualification for production The holder’s modest mass (approx. 0.2 kg) and standardised fixing elements make it straightforward to integrate into existing tool assemblies. Spare Torx screws and replacement inserts are standard procurement items, and the holder’s compatibility with widely used 4NKT06 inserts simplifies inventory management. For purchasers seeking assurance, the tool is available via Metav Werkzeuge, which combines broad stock availability with technical advice and reliable European distribution. The combination of standardised fastenings and an industry-recognised insert form supports efficient maintenance cycles and predictable production output. Contact Metav Werkzeuge to secure Teknik Makina shank milling cutters compatible with Taegutec 4NKT06, discuss suitable insert grades and delivery options by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: S471TM Manufacturer: Teknik Makina Compatible inserts: Taegutec 4NKT06 SKU: S471TM Dimensions & weight Shank diameter: 16 mm Cutting length: 25 mm Overall length: 120 mm Diameter: 16 mm Number of cutting edges: 2 Weight: 0.2 kg Mounting & special features Torx screw: M3x6,5 Torx key size: T8 Suitability: for 4NKT 0603 indexable inserts Practical for quick insert replacement FAQ Which inserts fit this holder? The holder accepts Taegutec 4NKT06 indexable inserts; the cutter was specified for the 4NKT 0603 insert format to ensure correct seating and clamping. What secures the insert in the cutter? The insert is clamped with a Torx screw M3x6,5, tightened using a T8 key, which provides consistent clamp torque and secure retention during machining. Which machines is the tool suitable for? The compact form and 16 mm shank make the tool suitable for small to medium CNC milling machines and machining centres where limited overhang and rigid clamping are required. How does this holder support production efficiency? By using indexable inserts such as the 4NKT06, the holder reduces tool-change times and tooling costs because worn cutting edges can be rotated or replaced independently of the toolholder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Cutter For APKT 0903 Indexable Inserts, 2 Flutes 50mm Cutting Length, 90° - Teknik Makina
Benefit from a robust insert milling cutter body with a 16 mm shank, 50 mm cutting length and a 90° cutting angle for reliable, repeatable machining; order the S210TM directly via Metav Werkzeuge or contact our consultants for tailored technical guidance. S210TM — Insert milling cutter body, 16 mm shank, for APKT 0903 (Teknik Makina) The S210TM is an insert milling cutter body designed for APKT 0903 indexable inserts, engineered to provide secure insert clamping and consistent chip evacuation for light to medium-duty milling operations. Shank Ø16 mm Compatible with APKT 0903 inserts 50 mm effective cutting length Overall length 150 mm Stiff shank and stable cutting for reliable cycle times The cutter body features a 16 mm shank, offering increased rigidity that reduces deflection during axial and radial engagement. The 50 mm cutting length is balanced to allow deeper cuts than standard short tools while keeping vibration in check, which helps to maintain edge life and dimensional stability. With a 90° cutting angle and two cutting edges, the design supports predictable chip formation and consistent surface finish, translating into fewer reworks and steadier production throughput. Fast insert changes and proven clamping components This tool is built for quick maintenance: the insert pocket accepts APKT 0903 indexable inserts and is compatible with inserts from Walter, ensuring easy sourcing. Insert retention is accomplished via an M2.5×5.5 Torx screw, tightened with a T8 Torx key, delivering repeatable clamping torque and minimised setup time. The secure fastening reduces the risk of insert movement under load, so the milling head maintains cutting geometry across repeated cycles and exchange operations. Compact dimensions that simplify tool management With an overall length of 150 mm and a net weight of 0.237 kg, the cutter body balances well for common toolholders and speed ranges. The relatively low mass helps with dynamic balancing in multi-spindle setups and can reduce wear on spindles and bearings over time. Specified dimensions support predictable run-out behaviour and easier integration into existing tool assemblies, making the component a practical choice for shops aiming to streamline tooling and reduce inventory complexity. For technical advice or to secure reliable supply of the Teknik Makina S210TM from Metav Werkzeuge, request personalised consultation or order dispatch from our Emmerich facility at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: S210TM Manufacturer: Teknik Makina Description: Insert milling cutter body for APKT 0903 indexable inserts SKU: S210TM Facts Shank diameter: 16 mm Effective cutting length: 50 mm Overall length: 150 mm Cutting angle: 90° Cutting edges: 2 Weight: 0.237 kg Diameter: 16 mm Special features Compatible insert: APKT 0903 Compatible insert manufacturer: Walter Torx screw: M2.5×5.5 Torx key size: T8 FAQ Which insert type fits this cutter body? The cutter body accepts APKT 0903 indexable inserts; inserts from Walter are compatible with the pocket geometry used on the S210TM. What is the shank diameter and why does it matter? The shank diameter is 16 mm; a stiffer shank reduces deflection and improves repeatability when machining under load. How many cutting edges are provided and what is the cutting angle? The tool utilises two cutting edges with a 90° cutting angle, supporting predictable chip flow and consistent surface finish. Which fastening components are used for the inserts? Insert retention uses an M2.5×5.5 Torx screw, accessed with a T8 Torx key, allowing secure and repeatable clamping. Is the S210TM suitable for integration into existing toolholders? Yes — the compact overall length (150 mm) and standard 16 mm shank make it straightforward to mount in many common holders, simplifying replacement and inventory management. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Cutter For APKT 1003 Indexable Inserts 90° 2 Flutes, 30mm Cutting Length - Teknik Makina
Take advantage of a rigid 16 mm shank diameter, a 90° cutting angle and a compact 100 mm overall length for highly stable face milling with indexable inserts. The modular insert system reduces tooling cost while the included Torx screw and key ensure fast mounting. Order the S031TM directly via Metav Werkzeuge or ask our consultants if needed. Shank cutter S031TM — for APKT 1003‑1604 indexable inserts, 16 mm shank (Teknik Makina) A robust shank cutter designed for face milling and light shoulder operations with APKT 1003 / APKT 1604 indexable inserts, optimised for stability and fast indexable‑insert changes Shank Ø16 mm for high rigidity Compatible with APKT 1003/1604 inserts 90° cutting angle for face and shoulder milling Includes M2.5x5.5 Torx screw and T8 key Stable machining with a rigid 16 mm shank for consistent results The S031TM is engineered as a compact, high‑rigidity shank milling cutter with a 16 mm shank diameter and a 100 mm overall length that together reduce deflection under load. With two cutting edges and a 90° cutting angle, the tool produces clean faces and reliable shoulder finishes while maintaining dimensional accuracy. Using indexable inserts means only the insert needs replacing after wear, lowering per‑cutting cost and downtime compared with solid‑carbide alternatives. The cutter body’s mass and geometry contribute to vibration damping so cycle times can be kept tight without compromising surface quality. Fast set‑up and predictable maintenance for production schedules The holder is supplied ready for mounting with an M2.5x5.5 Torx screw and a T8 key, enabling secure clamping of APKT inserts from recognised suppliers such as YG‑1. This reduces setup time and minimises the risk of incorrect fastening, which is crucial in batch production and just‑in‑time workflows. The indexable‑insert approach supports quick tool reconditioning: when an edge is worn, replace or reindex the insert and continue — no regrinding, no long tool lead times. The modest weight (0.275 kg) and compact form factor make handling straightforward on bench or in a tool magazine. Practical benefits for workshops and CNC shops seeking efficiency Designed for CNC milling and manual set‑ups where repeatability matters, this cutter combines predictable cutting geometry with economic operation. Compatibility with APKT 1003 inserts (also APKT1604) gives access to a wide range of grades for steel, stainless steel or cast materials depending on the chosen insert grade. The 2‑edge configuration balances metal removal and surface finish, offering a cost‑effective solution for light to medium machining tasks. For purchasing and logistics, Metav provides a transparent supply channel and quick dispatch from stock, supporting continuous production without long waits. For procurement or technical advice on integrating the S031TM into an existing toolset, contact Metav Werkzeuge — reliable delivery from Emmerich and expert consultancy are available to ensure the right insert grade and cutting parameters are selected. Technical data Article number: S031TM Manufacturer: Teknik Makina Suitable for indexable inserts: APKT 1003 / APKT 1604 Compatible insert manufacturer: YG‑1 Dimensions & weights Shank diameter: 16 mm Cutting length (shank cutting): 30 mm Overall length: 100 mm Diameter: 16 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 0.275 kg Features & fittings Torx screw: M2,5x5,5 Torx key size: T8 Insert type fitted: APKT 1003 Application: face and shoulder milling with indexable inserts FAQ What insert types fit this cutter? The cutter accepts APKT 1003 / APKT 1604 indexable inserts; APKT 1003 is the primary insert designation for this cutter. Which insert manufacturers are compatible? The body is compatible with inserts from YG‑1 and other suppliers that offer APKT 1003 / 1604 plates. Is the tool ready to mount straight away? Yes. The S031TM is delivered with an M2.5x5.5 Torx screw and requires a T8 key for secure mounting. What machining tasks is this cutter best for? It is optimised for face milling and light shoulder operations where a 90° cutting angle and stable shank are beneficial. How does using indexable inserts save costs? Replacing worn inserts is faster and cheaper than regrinding solid tools, reducing downtime and per‑edge tooling cost in series production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Cutter For APKT 1003 Indexable Inserts With Internal Coolant, 150mm L - Teknik Makina
Take advantage of a robust combination of compact design and efficient chip evacuation: the single‑shaft design with 16 mm shank and internal coolant reduces setup time and keeps production running smoothly. Order the cutter directly via Metav Werkzeuge or consult our specialists for tailored insertion and clamping advice. Shank milling cutter S173-1TM – for APKT 1003 indexable inserts, 16 mm shank, internal coolant (Teknik Makina) The Shank milling cutter S173-1TM is a compact, indexable milling tool engineered for precise face and slot milling using APKT 1003 inserts, suited to small toolholders and applications demanding reliable coolant delivery. 16 mm shank diameter for compact toolholders Internal coolant supply for efficient chip evacuation Compatible with APKT 1003 inserts by Korloy 150 mm overall length, 50 mm cutting length Reliable performance through compact engineering The S173-1TM is built around a 16 mm shank, a commonly used size that enables mounting in compact toolholders while maintaining rigidity. The cutter accepts APKT 1003 indexable inserts, which allow quick insert changes and consistent cutting geometry, reducing non-productive time. The presence of internal coolant channels focuses cutting fluid directly at the cutting edge, improving lubrication and cooling; this lowers tool wear and contributes to a more consistent surface finish. These design choices deliver a balance of durability and ease of maintenance, making the tool suitable for repetitive industrial milling tasks where productivity and uptime matter. Stability and repeatability for consistent results A 150 mm overall length combined with a 50 mm cutting length provides a controlled overhang that helps to limit vibration during machining. With two cutting edges, the cutter offers predictable cutting forces that support repeatable results across batches. The modest mass (approx. 0.23 kg) and standard shank diameter make it straightforward to integrate the tool into existing setups without complex balancing. The result is improved dimensional accuracy and a smoother milling process, particularly in operations where tool change frequency and consistent part quality drive process economics. Fast insert handling and low‑effort maintenance Replacement and fastening are simplified: the cutter uses Torx T8 engagement and M2.5×5.5 Torx screws for secure insert clamping. These standardised fastening elements ensure reliable seating of APKT 1003 inserts from Korloy and make routine servicing efficient. The internal coolant connection reduces the need for external nozzle adjustments and helps maintain chip control, which in turn reduces cleaning intervals at the machine. Together, these features lower total cycle downtime and support smoother shopfloor operation. For personalised technical advice on the Teknik Makina S173-1TM and assistance selecting the best APKT 1003 inserts or clamping accessories, contact Metav Werkzeuge in Emmerich by phone or email for prompt, expert support. Technical data SKU: S173-1TM Product type: Shank milling cutter Manufacturer: Teknik Makina UID: S173-1TM ECLASS: 21180806 Core technical data Diameter: 16 mm Overall length: 150 mm Shank diameter: 16 mm Cutting length: 50 mm Number of cutting edges: 2 Weight: 0.23 kg Special features Internal coolant Compatible with APKT 1003 indexable inserts Insert supplier compatibility: Korloy Torx key: T8 Torx screw: M2.5×5.5 FAQ Can the cutter be used with APKT 1003 inserts from other manufacturers? The cutter accepts standard APKT 1003 indexable inserts; compatibility with other suppliers is generally possible provided the inserts match the APKT 1003 geometry and clamping specifications. How does internal coolant improve machining performance? Internal coolant delivers fluid directly to the cutting edge, improving lubrication and cooling which reduces tool wear and assists chip evacuation when using the S173-1TM. What clamping hardware is required for insert replacement? Insert fastening on this cutter uses Torx T8 engagement with M2.5×5.5 Torx screws; these are the specified components for secure insert mounting. Is the 16 mm shank suitable for compact toolholders? A 16 mm shank is a standard size for compact toolholders and offers a good compromise between rigidity and compatibility for smaller milling setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Cutter For APKT 1003 Indexable Inserts With Internal Coolant, 50mm Cutting Length - Teknik Makina
Take advantage of the combination of a 16 mm shank, integrated internal coolant and proven compatibility with APKT 1003 indexable inserts for steady production performance; order directly via Metav Werkzeuge or contact the consultants for technical clarification. Indexable insert milling cutter for APKT 1003 — 16 mm shank, internal coolant (Teknik Makina) An indexable insert milling cutter for APKT 1003 inserts, designed for secure clamping on 16 mm spindles and for machining tasks where coolant-through capability reduces cutting temperatures and extends insert life. 16 mm shank diameter Internal coolant feed Compatible with YG-1 APKT 1003 inserts Overall length 150 mm Faster cycles with dependable stability The cutter delivers efficient material removal by combining a rigid 16 mm shank with a balanced geometry that supports consistent chip evacuation. The tool’s two-flute configuration enables high feed rates while maintaining surface finish, which reduces the number of passes required. For operations where cycle time is critical, the machining process benefits from the cutter’s stability and reduced vibration, helping to increase throughput without compromising component quality. Cooler cutting and longer insert life Integrated internal coolant channels supply cutting fluid directly to the cutting zone, improving heat dissipation and chip control. This targeted cooling lowers thermal load on the inserts and slows wear progression, which translates into longer insert life and fewer tool changes. The result is a more predictable production rhythm and lower tooling-related downtime, a pragmatic advantage for batch production and small-series work alike. Simple insert handling and secure fixation Compatibility with APKT 1003 indexable inserts from YG-1 simplifies logistics and keeps insert stocks standardised across the workshop. Replaceable inserts are secured by an M2.5x5.5 screw, tightened with a T8 Torx key, enabling quick index changes and minimal setup time. Clear accessibility of the fastening system supports efficient maintenance intervals and reduces the effort required for on-machine interventions. Built for predictable shop-floor integration With an overall length of 150 mm and a cutting length of 50 mm, the tool is compact yet versatile for a range of milling tasks. The lightweight construction contributes to reduced spindle load while the robust design supports repeatable positioning and reliable performance in milling centres and machining cells. Where standardisation and reliable supply are essential, this tool integrates into existing toolsets with minimal adaptation. For tailored advice and ordering of Teknik Cutting Tools indexable insert milling cutters, contact Metav Werkzeuge GmbH in Emmerich for consultation and supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: S035-1TM Label: 16mm shank cutter APKT 1003 L150mm with internal coolant Manufacturer: Teknik Cutting Tools Product type: Indexable insert milling cutter Facts Shank diameter: 16 mm Overall length: 150 mm Cutting length: 50 mm Number of cutting edges: 2 Weight: 0.32 kg Torx key: T8 Torx screw: M2.5x5.5 Internal coolant: yes Design and features Compatible with APKT 1003 indexable inserts Suitable for YG-1 APKT 1003 inserts Two-flute configuration Coolant-through geometry SKU S035-1TM FAQ Which inserts fit this cutter? The cutter accepts APKT 1003 indexable inserts; it is set up for inserts compatible with YG-1 nomenclature and pocket geometry. How is coolant delivered to the cutting zone? Coolant is supplied through the body via the integrated internal coolant channels, enabling direct delivery to the insert cutting edges for improved cooling. What is the required toolholder or shank size? The tool is designed for a 16 mm shank connection and is intended for holders that accept a 16 mm shank diameter. How are inserts secured in the head? Inserts are fastened with an M2.5x5.5 screw using a T8 Torx key, allowing straightforward insert changes with standard hand tools. Is this tool suitable for high-feed operations? The two-flute geometry supports elevated feed rates with good chip evacuation; process parameters should be validated against material and machine capabilities. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Cutter For APMT 0903 Indexable Inserts, 2 Cutting Edges, 120mm Overall Length - Teknik Makina
Take advantage of a compact, rigid toolholder that accepts APMT 0903 indexable inserts and secures them with a Torx M2.5x5.5 clamp for reliable, repeatable milling; the 16 mm shank and 120 mm overall length combine stiffness and accessibility for controlled machining. Order the shank milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shank Milling Cutter S047TM – for APMT 0903 indexable inserts, 16 mm shank (Teknik Makina) The Shank Milling Cutter S047TM is a robust insert holder designed to accept APMT 0903 indexable inserts for versatile milling operations in CNC and manual setups, combining a compact profile with secure Torx clamping for quick insert changes. 16 mm shank diameter Accepts APMT 0903 indexable inserts Torx clamp M2.5x5.5, key T8 120 mm overall length for compact setups Predictable rigidity for consistent machining results The holder’s 16 mm shank and compact geometry reduce tool overhang and increase stiffness, which improves cutting stability and surface finish during side and face milling. Fewer vibrations translate into longer insert life and more consistent part tolerances; the combination of a short overhang and a low mass of 0.16 kg also reduces spindle load, contributing to smoother acceleration and deceleration in high-speed cycles. These measurable mechanical traits support reproducible process results in both prototype and small-batch production. Fast, secure insert mounting to cut downtime Clamping is executed via a Torx M2.5x5.5 screw tightened with a T8 key, providing a secure, repeatable seat for each APMT 0903 insert. The standardised insert interface and positive screw clamping enable quick replacements and minimise adjustment time at the machine, which supports higher machine availability and predictable changeover times. Compatibility with widely available Korloy inserts simplifies stocking and procurement, reducing logistical complexity for toolrooms. Compact dimensions to suit constrained tool environments With a 120 mm overall length and a cutting height of 30 mm, this toolholder is designed for applications where space is restricted yet precision is required. The modest profile makes it suitable for multi-axis setups or clustered tool arrangements where minimising interference is essential. Designers and operators benefit from the balance between accessibility and stiffness, allowing effective use in fixtures where longer tools would introduce unacceptable deflection. Practical suitability and target use cases The insert holder is practical for job shops and production environments that favour indexable tooling for flexibility and cost-efficiency. Its acceptance of APMT 0903 inserts allows a selection of grades and geometries for finishing or light- to medium-duty roughing without changing the holder. The two cutting edges offer a simple geometry that is easy to dress via insert selection, helping reduce tooling complexity while maintaining process reliability. Contact Metav Werkzeuge to discuss how the Teknik Makina S047TM can be integrated into existing toolsets — reliable supply from Emmerich, direct assistance at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: S047TM Manufacturer: Teknik Makina Compatible inserts: APMT 0903 Compatible insert supplier: Korloy Weight: 0.16 kg Facts Shank diameter: 16 mm Overall length: 120 mm Cutting height: 30 mm Number of cutting edges: 2 Diameter: 16 mm Special features Torx screw: M2.5x5.5 Torx key: T8 Accepts APMT 0903 indexable inserts Compact shank design FAQ Is the tool compatible with Korloy inserts? The holder accepts APMT 0903 inserts and is specified as compatible with Korloy-supplied inserts, enabling straightforward use of those geometries. What size shank and overall length does the tool have? The tool features a 16 mm shank and an overall length of 120 mm, offering a compact footprint for tight setups. Which screw and key are required for insert clamping? Clamping uses a Torx M2.5x5.5 screw secured with a T8 key for repeatable and tight seating of the insert. How many cutting edges does the holder provide? The tool is designed for two cutting edges, giving a simple, robust cutting geometry suitable for a range of general milling tasks. What are the practical benefits of choosing this insert holder? The insert holder reduces inventory complexity by using standard APMT 0903 inserts, provides secure Torx clamping for fast insert changes, and its compact design improves stiffness and accessibility in confined machining arrangements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Cutter For APMT 11T3 Indexable Inserts 90° Cutting Angle, 2 Flutes, 25mm Cutting Length - Teknik Makina
Benefit from the combination of robust clamping, straightforward insert replacement and broad compatibility for reliable milling cycles; the 16 mm shaft and APMT 11T3 insert interface make this a practical choice for modular indexable milling — order the S228TM shank cutter directly via Metav Werkzeuge or ask our consultants if needed. S228TM shank cutter by Teknik Makina — 16 mm shaft, for APMT 11T3 indexable inserts The S228TM is a shank cutter designed for modular indexable-insert milling, combining a compact 16 mm shaft with a 25 mm cutting length for stable, repeatable machining in CNC environments. 16 mm shaft diameter for stable clamping 25 mm effective cutting length Compatible with APMT 11T3 indexable inserts Torx M2.5x5.5 screw with T8 key Predictable performance for indexable-insert milling The S228TM is built to deliver consistent results in production workflows where predictable tool behaviour matters. Its 16 mm shaft diameter and 90° cutting angle ensure firm clamping and an axial engagement geometry that supports repeatable slotting and face-milling passes. The cutter accepts APMT 11T3 indexable inserts, enabling rapid insert changes and the flexibility to match grade and geometry to specific tasks. With two flutes, chip evacuation is balanced for many common feed rates, reducing the need for corrective rework and helping maintain cycle-time targets. Faster service intervals and low-maintenance operation A practical securing solution reduces downtime: the tool is tightened with a Torx M2.5x5.5 screw and requires a T8 key for insert changes, which simplifies routine maintenance and insert replacement. The shank design and 25 mm effective cutting length keep the cutter compact while allowing sufficient reach for most modular milling applications. The moderate overall length of 90 mm and the low weight of 0.138 kg make handling and tool change on the toolholder straightforward, supporting efficient tool management and predictable spindle loading across shifts. Suitable for modular production cells and retrofit toolsets Designed as a modular component, this indexable-insert cutter fits setups that favour flexibility over single-use tooling. The tool’s compatibility with APMT 11T3 inserts and recognised insert manufacturers such as Korloy helps simplify stocking strategies: one shank can accept inserts selected for wear resistance or surface finish as the process demands. For procurement and maintenance teams, the combination of standardised insert format and a stable shank reduces tooling complexity and supports fast replacement cycles that keep production moving. Contact Metav Werkzeuge for tailored milling solutions and technical advice on the S228TM shank cutter to ensure optimal integration into existing CNC toolsets Technical Data SKU: S228TM Brand: Teknik Makina Type: shank cutter for APMT 11T3 indexable inserts eCl@ss: 21180806 ETIM: EC011860 Core technical data Shaft diameter: 16 mm Effective cutting length: 25 mm Overall length: 90 mm Diameter: 16 mm Number of cutting edges: 2 Weight: 0.138 kg Cutting angle: 90° Special features Compatible inserts: APMT 11T3 Compatible insert manufacturer: Korloy Torx screw: M2.5x5.5 Required Torx key: T8 Files available: 62de7e5a33927e49dbf3274f, 62de7eeba9cff922f4703d56 FAQ Which insert type fits this shank cutter? The S228TM accepts APMT 11T3 indexable inserts; Korloy-manufactured APMT 11T3 grades are listed as compatible. What are the main dimensions to consider for toolholding? Key dimensions: 16 mm shaft diameter, 25 mm effective cutting length and 90 mm overall length; the cutter weighs 0.138 kg. How many cutting edges does the tool have? This shank cutter features two cutting edges, designed for balanced chip removal and stable milling. What fastening hardware is specified for insert retention? Insert retention uses a Torx M2.5x5.5 screw; a T8 key is required for tightening and replacement. Is the cutting geometry standard for face and slot milling? The tool provides a 90° cutting angle, suitable for common face and slot milling operations with indexable inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Cutter For APMT 11T3 Indexable Inserts With Internal Coolant, 25mm Cutting Length - Teknik Makina
Take advantage of a compact 16 mm shank combined with internal coolant and a 25 mm cutting length for reliable chip control and consistent finishes; ideal for small to medium series milling. Order the shaft cutter directly via Metav Werkzeuge or ask our consultants if needed. Shaft cutter for APMT 11T3 indexable inserts — 16 mm shank, internal coolant (Teknik Makina) A shaft cutter for APMT 11T3 indexable inserts designed for general face and shoulder milling in production and workshop environments, combining compact dimensions with coolant-fed performance. Compact 16 mm shank diameter Internal coolant for improved chip evacuation Compatible with APMT 11T3 inserts (Korloy) Overall length 90 mm for tight set-ups Consistent results from a rigid 16 mm shank The compact 16 mm shank delivers a stable connection to common toolholders while keeping the tool envelope small for restricted setups. The reduced overhang and optimised rigidity help maintain dimensional accuracy across serial production, which translates into fewer rework cycles and predictable cycle times. For many small-batch milling tasks, the combination of rigidity and a short cutting length supports a balance between tool life and surface quality. Coolant-fed cutter for dependable chip control Equipped with internal coolant, this cutter directs coolant straight to the cutting zone, improving chip evacuation and heat management. That direct supply helps prevent built-up edge and reduces thermal distortion of the workpiece, which is particularly beneficial when working with tougher materials or interrupted cuts. The coolant feature also assists in maintaining consistent cutting conditions across longer runs, supporting process reliability. Fast insert changes and service-friendly design The tool accepts APMT 11T3 indexable inserts, compatible with Korloy inserts, enabling rapid replacement of cutting edges without tool regrinding. Two cutting edges simplify indexing and spare management, while the supplied Torx interface (T8 key, screw M2.5x5.5) allows secure clamping and quick servicing. This modularity reduces downtime and simplifies logistics for workshops that prefer insert-based tooling systems. Compact geometry for versatile milling tasks With a 90 mm overall length and a 25 mm cutting length, the cutter fits tight arrangements and multi-axis machines where tool clearance is limited. The small tool mass—approximately 0.138 kg—helps reduce spindle load during rapid traverses and contributes to smoother acceleration profiles. The result is a practical tool for finishing passes, light slotting and shoulder work where a compact indexable solution is preferred. Secure Teknik Makina's 16 mm shaft cutter with internal coolant through Metav Werkzeuge for dependable production performance and tailored technical advice from our Emmerich-based team Technical data SKU: S228-1TM Product type: Shaft cutter Manufacturer: Teknik Makina Label: 16 mm shaft cutter APMT 11T3 L90 mm with internal coolant Core specifications Shank diameter: 16 mm Overall length: 90 mm Cutting length: 25 mm Number of cutting edges: 2 Weight: 0.138 kg Torx key: T8 Torx screw: M2.5x5.5 Compatibility & features Internal coolant: yes Compatible inserts: APMT 11T3 Compatible insert brand: Korloy Indexable insert system: APMT 11T3 FAQ What insert type does this cutter use? The cutter is designed for APMT 11T3 indexable inserts and accepts standard Korloy inserts of that designation. Is the tool suitable for working with interrupted cuts? Yes, the internal coolant and robust shank geometry support interrupted cutting; the modular insert system also allows rapid index changes for continued operation. Which toolholder shank fits this cutter? The tool features a 16 mm shank diameter, making it compatible with holders rated for a 16 mm shank. How are the inserts secured and serviced? Inserts are fastened using a Torx screw (M2.5x5.5) accessed with a T8 Torx key, enabling quick replacement and secure clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Cutter For BLMP 0603 Indexable Inserts 2 Flutes 150mm Overall Length, 40mm Cutting Length - Teknik Makina
Take advantage of the precise fit and robust design: the 16 mm shank and compatibility with BLMP 0603 indexable inserts ensure stable clamping and repeatable results in serial milling. The combination of a 40 mm effective cutting length and a 150 mm overall reach supports deeper operations without frequent tool changes. Order directly via Metav Werkzeuge or request advice from the Metav consultants for an optimised tooling setup. Shank Cutter S479TM — Insert milling cutter for BLMP 0603, 16 mm shank (Teknik Makina) The Shank Cutter S479TM is a purpose-built insert milling cutter intended for precision milling with BLMP 0603 indexable inserts, suited to machine-shop operations requiring reliable insert replacement and stable toolholding. *16 mm shank for standard toolholders *Compatible with BLMP 0603 indexable inserts *Two cutting edges for efficient material removal *150 mm overall length for deep reach Stable clamping and repeatable positioning improve process control The tool features a 16 mm shank that is machined to provide consistent concentricity in standard collets and toolholders, which reduces runout and supports predictable tool life. Compatibility with BLMP 0603 indexable inserts simplifies inventory planning by allowing the use of a common insert family; the insert is secured with an M3x6.5 screw that is tightened using a T8 Torx key for a secure fit. These design choices are intended to reduce set-up time and variability on the shop floor while enabling reproducible results across multiple setups. Efficient cutting geometry and extended reach increase throughput Equipped with two cutting edges and a 40 mm cutting length, the cutter balances material removal rate with stability. The two-flute arrangement permits higher feed per tooth compared with multi-flute micro-tools, improving chip evacuation and reducing heat build-up under typical milling conditions. With an overall length of 150 mm, the tool provides the additional reach required for deeper pockets or stepped features while maintaining manageable mass—recorded weight: 0.235 kg—to limit spindle load and preserve machine dynamics. Practical serviceability and straightforward spare-part handling Quick insert changes are supported by a standard Torx fixation (screw M3x6.5, key T8), enabling straightforward replacement and minimising downtime during production runs. The cutter is specified for use with inserts from established manufacturers such as Taegutec, ensuring that replacement inserts and cutting geometries are widely available. Documentation and ordering can be centralised through Metav Werkzeuge for streamlined supply and traceability in procurement processes. For precision-compatible tooling from Teknik Cutting Tools, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss the S479TM shank cutter and supply options Technical Data Article number: S479TM Manufacturer: Teknik Makina Product: Shank cutter for BLMP 0603 indexable inserts Data Shank diameter: 16 mm Cutting length: 40 mm Cutting edges: 2 Overall length: 150 mm Weight: 0.235 kg ECLASS: 21180806 ETIM: EC011860 Special features Compatible inserts: BLMP 0603 Suitable for inserts manufacturer: Taegutec Torx screw: M3x6.5 Torx key: T8 SKU: S479TM FAQ Which inserts fit this cutter? The cutter accepts BLMP 0603 indexable inserts; compatibility with inserts from Taegutec is indicated for the S479TM insert milling cutter. What is the shank diameter and how is it clamped? The S479TM has a 16 mm shank designed for standard toolholders and collets; concentric machining of the shank supports reliable clamping. How many cutting edges and what is the cutting length? This insert cutter is configured with two cutting edges and provides a 40 mm effective cutting length for extended engagement. Which screw and key are required to fix the insert? Insert retention uses an M3x6.5 screw secured with a T8 Torx key for firm, repeatable insert clamping on the S479TM. For what kinds of milling tasks is this cutter intended? The tool is tailored to milling operations that use BLMP 0603 inserts, offering a balance of reach and stability suitable for general face and slot milling on production machinery. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Cutter For LNMU 0202 Indexable Inserts With Internal Coolant, 4 Flutes - Teknik Makina
Take advantage of the combination of internal coolant, a 16 mm shank and compatibility with LNMU 0202 indexable inserts for reliable milling results and reduced tool-change downtime. Order directly via Metav Werkzeuge or consult the Metav technical team for application-specific guidance. Shaft milling cutter S709TM – 16 mm shank, internal coolant, for LNMU 0202 indexable inserts (Teknik Makina) A shaft milling cutter S709TM engineered for indexable-insert face and shoulder milling, designed to deliver consistent chip control in production and repair workshops. 16 mm shank diameter Internal coolant for chip evacuation Compatible with Tungaloy LNMU 0202 inserts Four cutting edges for balanced cutting Precision and productivity for demanding milling tasks The 16 mm shank and the tool’s balanced geometry provide a stable platform for indexable-insert milling, which translates to consistent surface finish and predictable tool life. Designed around the LNMU 0202 insert form, this cutter accepts standard indexable inserts, enabling fast insert replacement and straightforward inventory management. The combination of a compact 100 mm overall length and a 30 mm cutting length allows a good compromise between reach and rigidity, making the tool suitable for shoulder and face milling operations where vibration control and dimensional stability matter. Engineered coolant delivery and simple insert change Equipped with internal coolant, the cutter channels cutting fluid directly to the cutting zone to improve cooling, reduce built-up edge and support efficient chip evacuation. This feature often extends insert life and supports higher metal-removal rates in continuous production. The insert is secured with a M1.8x4.1 Torx screw operated by a T6 key, making insert changes quick and repeatable and reducing non-productive time. For workshops moving from solid-tool strategies to indexable systems, this tool simplifies maintenance while maintaining high throughput. Compatibility and workshop benefits for streamlined workflows As a shank cutter built for LNMU 0202 inserts and compatible with Tungaloy geometries, the tool integrates into existing indexable-insert ecosystems without special adapters. The modest weight of 0.248 kg and standard shank diameter support common collets and holders, enabling rapid tool swaps and minimal setup. For procurement and operations, the indexable approach reduces overall tooling cost by replacing only the cutting tips while retaining the robust cutter body. The cutter’s design suits production lines and job-shop environments where repeatability and quick serviceability are priorities. For application-specific recommendations or to secure Teknik Makina’s internal-coolant shaft milling cutter via Metav Werkzeuge, contact the Metav team in Emmerich for availability and technical advice: +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: S709TM Manufacturer: Teknik Makina Product type: Shaft milling cutter Compatible inserts: LNMU 0202 Compatible insert manufacturer: Tungaloy Facts Shank diameter: 16 mm Overall length: 100 mm Cutting length: 30 mm Number of cutting edges: 4 Weight: 0.248 kg Screw: M1.8x4.1 Torx key: T6 eClass: 21180806 Special features Internal coolant: yes Indexable insert system Category path: Zerspanen › Schaftfräser FAQ What operations is this cutter intended for? The S709TM shaft milling cutter is intended for face and shoulder milling using indexable inserts, offering stable performance in repetitive production and workshop applications. Which inserts and brands are compatible? Compatible with LNMU 0202 indexable inserts and suitable for Tungaloy geometries, enabling use of widely available insert grades. How does the internal coolant benefit machining? Internal coolant delivers fluid directly to the cutting zone to improve cooling, reduce built-up edge and aid chip evacuation, which can extend insert life and enhance surface quality. How many cutting edges and what cutting length does the tool have? The tool features 4 cutting edges and a 30 mm cutting length, providing a balance between material removal and rigidity. How are the inserts secured and changed? Inserts are fastened with a M1.8x4.1 Torx screw and require a T6 key for quick, repeatable changes; this reduces downtime during maintenance. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm Cutter for LNMU 0303 Indexable Inserts With Internal Coolant, 150mm - Teknik Makina
Benefit from stable chip control, a 16 mm shank and built‑in internal coolant for reliable, repeatable milling results; the compatibility with LNMU 0303 indexable inserts makes this cutter body a flexible choice for batch and single‑part production. Order the milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Indexable Insert Milling Cutter — 16 mm shank, internal coolant (Teknik Makina) The Indexable Insert Milling Cutter is a milling body designed for LNMU 0303 indexable inserts, suitable for precision face and peripheral milling where direct coolant supply and compact shank geometry improve machining stability. Compatible with LNMU 0303 inserts (Tungaloy) 16 mm shank with 150 mm overall length Internal coolant for stable chip evacuation Secured via Torx T8 screw M2.5x7 Consistent material removal with direct coolant delivery The cutter body is engineered to focus on reliable metal removal: the internal coolant channel directs cutting fluid straight to the insert seat, reducing built‑up edge and improving flushing of chips. With compatibility for LNMU 0303 indexable inserts, the system separates cutting geometry (inserts) from the body, enabling quick index changes and consistent surface finish. The compact 16 mm shank and balanced geometry help maintain low run‑out, which is particularly beneficial when working on small‑diameter shoulder and slot operations in serial production. Secure clamping and repeatable set‑up for high process stability Clamping is achieved with a Torx fixation that prevents loosening under vibration: Torx T8 with screw M2.5x7 ensures a concise and reproducible seat for each insert replacement. The design with 2 cutting edges reduces cutting forces per tooth and simplifies balancing, delivering smoother feeds and reduced chatter on interrupted cuts. These mechanical choices lower setup time and minimise variances between operators, supporting predictable cycle times and consistent component quality. Practical advantages across workshop and production environments With an overall length of 150 mm and a cutting length of 50 mm, the cutter body strikes a balance between reach and rigidity, suitable for medium‑depth face milling and light slotting tasks. The lightweight construction (approx. 0.233 kg) makes handling and tool changes straightforward at the machine, while the compatibility with Tungaloy inserts offers access to a wide range of grades for steels, non‑ferrous alloys and tougher materials when required. The modular nature of the system reduces running costs: worn inserts are replaced rather than the entire tool, and coolant‑assisted cutting helps extend insert life and improve surface quality. For machining tasks that demand reliable coolant delivery and repeatable clamping, choose the Teknik Cutting Tools milling body with internal coolant — contact Metav Werkzeuge for expert advice and dependable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S671-1TM Type: Indexable insert milling cutter body Manufacturer: Teknik Cutting Tools SKU: S671-1TM Compatible inserts: LNMU 0303 Compatible insert manufacturer: Tungaloy Facts Shank diameter: 16 mm Overall length: 150 mm Cutting length: 50 mm Number of cutting edges: 2 Weight: 0.233 kg Torx key: T8 Torx screw: M2.5x7 Materials & features Internal coolant Indexable insert system Torx fastening for secure clamping Lightweight cutter body for easy handling FAQ Which inserts fit this cutter body? The cutter body accepts LNMU 0303 indexable inserts; the tool is supplied to work with inserts from Tungaloy as specified for reliable fit and performance (SKU S671-1TM). Does the tool provide coolant to the cutting edge? Yes, the body features internal coolant that channels fluid directly to the insert seat to aid chip evacuation and extend insert life. What is the shank size and overall reach? The shank diameter is 16 mm and the overall length is 150 mm, with a cutting length of 50 mm for medium‑reach milling tasks. How are the inserts secured in the cutter? Inserts are fastened using a Torx screw specification M2.5x7 tightened with a T8 Torx key, ensuring repeatable and secure clamping. Is this cutter suitable for heavy roughing? This cutter body is optimised for stable, precise milling with LNMU 0303 inserts; for heavy roughing applications larger diameter bodies or different insert geometries may be more suitable depending on the workpiece material and depth of cut. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm Cutter For LNMX 0402 Indexable Inserts With Internal Coolant, 4 Flutes - Teknik Makina
Benefit from a robust combination of stable shank design, internal coolant and indexable-insert flexibility to keep production running smoothly. The tool’s 16 mm shank, four cutting edges and compatibility with LNMX 0402 inserts deliver consistent material removal and low downtime. Order directly via Metav Werkzeuge or consult our experts for integration advice. 16 mm shank milling cutter for LNMX 0402 indexable inserts (Teknik Makina) The 16 mm shank milling cutter for LNMX 0402 indexable inserts is a production-oriented milling tool engineered for secure insert clamping and coolant-assisted chip control in industrial machining. 16 mm shank for stable machining Internal coolant for improved chip evacuation Accepts LNMX 0402 indexable inserts Compatible with Korloy insert geometry Increase throughput with proven indexable-insert milling The 16 mm shank milling cutter is designed to convert indexable inserts into a productive milling solution. By accepting LNMX 0402 inserts, the cutter enables quick edge changes and predictable cutting forces, which reduces non-productive time. The combination of a solid shank and repeatable insert seating improves spindle load consistency, supporting higher feed rates while maintaining surface quality. This results in measurable gains in cycle time and process stability for serial production. Reduce maintenance and keep machines running A compact design with internal coolant and 4 cutting edges minimises thermal loads and improves chip evacuation at the cutting zone. The internal coolant feed supports reliable cooling directly at the cutting interface, which extends insert life and reduces built-up edge formation. Fast replacement is facilitated by a standard T6 drive and M1.8x4.1 fitted screw, allowing maintenance teams to return the machine to production quickly and without special tooling. Straightforward compatibility for workshop integration The tool’s insert interface is matched to standard LNMX 0402 geometry and is compatible with Korloy inserts, simplifying spare-part logistics and supplier management. With a 100 mm overall length and a 50 mm cutting length the cutter integrates easily into common holder systems and machining setups. The lightweight construction (approx. 0.13 kg) and standard shank diameter support rapid tool changes and predictable balancing, helping to preserve spindle bearings and maintain part tolerances. For detailed technical matching, spare-part availability or to secure this Teknik Makina shank milling cutter through Metav Werkzeuge, contact our workshop specialists at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S089TM Manufacturer: Teknik Makina Product type: Shank milling cutter Insert type: LNMX 0402 Facts Shank diameter: 16 mm Overall length: 100 mm Cutting length: 50 mm Number of cutting edges: 4 Weight: 0.13 kg Torx key: T6 Torx screw: M1,8x4,1 eClass: 21180806 Special features Internal coolant Compatible with Korloy LNMX 0402 inserts Indexable-insert concept for fast edge changes Lightweight design for reduced spindle load FAQ Which insert type is required for this cutter? The cutter is designed for LNMX 0402 indexable inserts and is supplied to accept that standard geometry. Does the tool provide coolant to the cutting edge? Yes, the cutter features internal coolant to direct coolant to the insert seat and cutting zone. What is the shank diameter and overall length? Shank diameter is 16 mm and the overall length is 100 mm, with a 50 mm cutting length. How many cutting edges does the tool use and how are they secured? The tool uses 4 cutting edges, each secured with a Torx screw (M1,8x4,1) tightened with a T6 key. Is this cutter compatible with third‑party inserts? The cutter is compatible with inserts that match LNMX 0402 geometry, including inserts from Korloy. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Cutter For R390-11T3 Indexable Inserts 2 Flutes 90° Cutting Angle 40mm Cutting Length, 150mm Overall Length - Teknik Makina
Take advantage of a robust combination of industry-standard compatibility and secure clamping: the tool’s compatibility with Sandvik R390-11T3 indexable inserts and its 16 mm shank ensure stable machining and straightforward tool management. Order directly via Metav Werkzeuge or request technical advice for seamless integration. Shank Milling Cutter S593TM — 16 mm shank, for R390-11T3 indexable inserts (Teknik Makina) The Shank Milling Cutter S593TM is an indexable-insert milling solution for general workshop and production applications, optimised for face milling and light slotting where Sandvik R390-11T3 inserts are required. Compatible with Sandvik R390-11T3 inserts 16 mm shank diameter for stable clamping Two cutting edges for efficient material removal 90° cutting angle for precise face milling Torx fixation M2.5x5.5 with T8 key Deliver consistent productivity with industry-standard inserts The S593TM is designed around the widely used R390-11T3 indexable inserts, which simplifies stocking and reduces tooling complexity. Using industry-standard inserts means predictable cutting performance and easy replacement. The combination of indexable inserts and a modular shank cutter reduces setup time and supports uninterrupted production runs, offering a measurable improvement in workshop efficiency without altering existing insert inventories. Stable clamping and accurate surface quality A 16 mm shank diameter provides a rigid connection to the tool holder, lowering vibration and improving surface finish. The tool features two cutting edges, enabling balanced cutting forces and efficient material removal. With a 90° cutting angle, the cutter is particularly suited to face milling operations where perpendicular surfaces and dimensional accuracy are priorities. These geometric characteristics translate directly into reproducible part quality and reduced rework rates. Quick insert retention and straightforward maintenance Retention is by a Torx-mounted screw ( M2.5x5.5 ) serviced with a T8 key, allowing fast insert changes and secure clamping. The cutter’s 40 mm cutting length and 150 mm overall length give a predictable tool projection for common setups, while the light 0.229 kg mass makes handling simpler during tool changes. Clear, serviceable fixation and standardised insert compatibility reduce downtime and simplify workshop logistics. Practical integration for mixed-production environments Designed as a practical element of a broader tooling strategy, this shank milling cutter supports a range of machining tasks where indexable inserts are preferred for economy and repeatability. The documented fit with Sandvik insert geometry enables straightforward tool planning and helps maintain consistent cycle times across different jobs. For operations seeking to streamline tooling without sacrificing precision, this cutter offers a robust, compatible option. Discuss how the S593TM can be integrated into current tooling strategies with Metav Werkzeuge—technical guidance and supply from Emmerich available at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: S593TM Manufacturer: Teknik Makina SKU: S593TM Compatible inserts: R390-11T3 Compatible insert manufacturer: Sandvik Facts Shank diameter: 16 mm Cutting length: 40 mm Overall length: 150 mm Diameter: 16 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 0.229 kg Torx screw: M2.5x5.5 Torx key size: T8 Special features Indexable-insert design Torx-mounted insert fixation Suitable for face milling and light slotting Compatible with Sandvik R390-11T3 inserts Lightweight, easy to handle FAQ Which inserts fit this cutter? The S593TM accepts Sandvik R390-11T3 indexable inserts; the tool is configured for that insert form and size for reliable seating and performance. What shank size is required for the tool holder? A 16 mm shank diameter is specified for this shank milling cutter, providing a stable interface to standard 16 mm tool holders. How many cutting edges does the tool have and how are they retained? This cutter uses two cutting edges retained by a Torx screw (M2.5x5.5) requiring a T8 key for secure clamping and quick insert changes. Is the cutter suitable for face milling or slotting applications? With a 90° cutting angle the S593TM is optimised for face milling and can perform light slotting when combined with the appropriate R390-11T3 insert grade. What are the overall and cutting lengths for the S593TM? The overall length is 150 mm and the cutting length is 40 mm; the tool weight is 0.229 kg, which eases handling during tool changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Cutter For R390-11T3 Indexable Inserts 90° Angle, 2 Flutes 40mm Cutting Length - Teknik Makina
Benefit from a robust combination of indexable‑head design, a secure Ø16 mm shank and a 90° cutting geometry for dependable shoulder milling; order directly via Metav Werkzeuge or consult our specialists for application advice. Shank Milling Cutter S591TM – 90° indexable‑head for R390‑11T3 inserts (Teknik Makina) Shank Milling Cutter S591TM designed for precision shoulder and face milling using R390‑11T3 indexable inserts in production and workshop environments Indexable R390-11T3 compatibility Ø16 mm shank for secure clamping 90° cutting angle for shoulder milling Torx M2.5 clamping with T8 key High machining efficiency through proven insert technology The S591TM combines an indexable‑head layout with proven insert geometry to deliver consistent metal removal rates. By accepting R390‑11T3 inserts, the tool enables quick insert changes and predictable cutting performance, reducing downtime compared with solid cutters. The 90° cutting geometry supports accurate shoulder faces and square walls, which simplifies setup and reduces finishing passes. This results in a measurable productivity gain on batch work and mixed‑lot production. Secure mounting and straightforward maintenance for repeatable results With a Ø16 mm shank and standard clamping hardware, the cutter offers a compact footprint and rigid seating in common toolholders. The clamping screw specification M2.5x5.5 with a T8 key provides positive indexable insert retention and simple serviceability. These features combine to reduce vibration and extend insert life, supporting consistent part tolerances across production runs and easing tool management in busy workshops. Practical advantages for workshop workflows This indexable shank cutter is optimised for quick reconditioning: worn inserts are exchanged in seconds, and the shank profile is compatible with a wide range of collets and holders. The two cutting edges configuration balances material removal with tool life, while the cutting length 40 mm and overall length 120 mm keep the assembly compact for use on milling machines with limited clearance. Such characteristics lower the total cost per finished part and simplify inventory handling. Application scope and material considerations Intended primarily for shoulder milling and face operations, the tool is suitable where robust, repeatable cuts are required. Compatibility with Sandvik‑style inserts makes the cutter a practical choice for operations already standardised on those grades and geometries. Because the design uses replaceable inserts, different grades can be selected to match workpiece materials and machining strategies without changing the holder. For a direct supply from Emmerich and application guidance for the S591TM, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options Technical Data Article number: S591TM Manufacturer: Teknik Cutting Tools Product: Shank milling cutter for R390-11T3 indexable inserts Compatible insert manufacturer: Sandvik Facts Shank diameter: 16 mm Cutting length: 40 mm Overall length: 120 mm Diameter: 16 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 0.18 kg SKU: S591TM eClass: 21180806 ETIM: EC011860 Design & special features Compatible with R390-11T3 indexable inserts Torx clamping screw M2.5x5.5 Torx key size T8 Indexable‑head design for rapid insert changes 90° geometry for accurate shoulder milling FAQ Which inserts fit this cutter? The cutter accepts R390‑11T3 indexable inserts; the S591TM is configured for Sandvik‑compatible insert sizes and geometries. What is the shank diameter and how does it affect clamping? The shank diameter is 16 mm, which provides a rigid connection to common holders and collets, ensuring stable clamping for the S591TM shank milling cutter. Can the clamping screw be replaced with a standard spare? Yes, the tool uses an M2.5x5.5 Torx screw and a T8 key; these items are standard and can be sourced as maintenance spares. What machining tasks is this cutter best suited to? The tool is optimised for shoulder and face milling where a 90° cutting angle is required and fast insert changes are beneficial for productivity. Is the S591TM suitable for heavy roughing? The indexable design with two cutting edges is aimed at balanced removal rates and repeatability; for heavy roughing higher‑edge‑count or larger diameter tools may be preferred. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Cutter For SPMG 0502-0904 Indexable Inserts, 2 Flutes 40mm Cutting Length, M2.2x5 Torx - Teknik Makina
Data inconsistency detected: the product’s listed compatible indexable insert sizes conflict (one entry specifies SPMG 0502–0904 while another specifies SPMG 0602). Please verify the correct insert designation before publishing the product description, as ensuring accuracy in technical specifications is crucial to avoid potential confusion or errors for customers who rely on precise information when selecting products for their specific applications, especially in industries where compatibility and performance are critical. Double-checking the insert sizes will help maintain the integrity of the product data and uphold the company’s reputation for providing reliable and accurate information to its users.
16mm Cutter For WNMX 0603 Indexable Inserts 90° Shank, 2 Flutes 150mm - Teknik Makina
Take advantage of a rigid shank Ø16 mm and a precise 90° cutting angle for reliable shoulder milling; compatibility with WNMX 0603 indexable inserts keeps tooling simple and cost-effective. Order the cutter directly via Metav Werkzeuge or ask the Metav consultants for configuration support. Shaft cutter S898TM — 90° indexable-insert milling cutter, shank Ø16 mm (Teknik Makina) Shaft cutter S898TM for indexable inserts, designed for square-shoulder milling and fast insert changes in metalworking environments Shank Ø16 mm for rigid clamping Compatible with WNMX 0603 inserts 90° cutting angle for square-shoulder milling Torx screw M2.5x5.5 with T8 key for quick insert changes Consistent rigidity for repeatable machining The robust shank Ø16 mm delivers reduced runout and stable clamping, which in turn improves surface finish and tool life when performing shoulder or face milling. Because the tool accepts WNMX 0603 indexable inserts, the cutting geometry is standardised and predictable: insert indexing keeps downtime low and repeatability high. For workshops that require reliable, repeatable operations, this configuration supports steady cycle times and predictable maintenance intervals. Faster changeovers, higher machine utilisation Insert retention is managed with an M2.5x5.5 Torx screw and requires a T8 key, enabling quick and secure insert changes without special fixtures. Rapid insert replacement reduces non-cutting time and simplifies daily tooling routines, increasing effective spindle time. The two cutting edges provide an efficient compromise between metal removal rate and insert cost, helping to maintain productivity across short and medium production runs. Clear, comparable specifications ease tool selection Key dimensions are presented for straightforward tool matching: diameter 16 mm, cutting length 40 mm, overall length 150 mm, cutting edges 2, and weight 0.241 kg. The 90° cutting angle is optimised for square-shoulder operations, so toolpath and fixture design remain simple. These measurable values support calculation of overhang, rigidity and recommended cutting parameters when planning setups on lathes or milling centres. Proven compatibility and workshop practicality Designed for use with Korloy and other manufacturers' WNMX 0603 inserts, the product suits a range of workshop tasks where indexable-insert technology is preferred for economy of running costs. The compact mass and industry-standard insert pocket make the tool a practical choice for busy shops aiming to reduce tool inventory complexity while keeping replacement inserts widely available. Metav’s distribution ensures reliable supply and clear configuration guidance for integration into existing tooling systems. Contact Metav Werkzeuge today for precise configuration advice and fast delivery from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S898TM Manufacturer: Teknik Makina Designation: Shaft cutter for WNMX 0603 indexable inserts Specifications Diameter: 16 mm Shank diameter: 16 mm Cutting length: 40 mm Overall length: 150 mm Cutting edges: 2 Cutting angle: 90° Weight: 0.241 kg SKU: S898TM Features and compatibility Compatible with WNMX 0603 indexable inserts Suitable for Korloy inserts Torx screw M2.5x5.5 Torx key T8 Brand: Teknik Makina FAQ Which insert type fits this cutter? The cutter accepts WNMX 0603 indexable inserts; compatibility with Korloy inserts is specified for S898TM. How is the insert secured and which key is required? Insert clamping uses an M2.5x5.5 Torx screw; a T8 Torx key is used for tightening and removal. What are the main dimensions to consider for setup? Important values: diameter 16 mm, cutting length 40 mm, overall length 150 mm, cutting edges 2, weight 0.241 kg. What machining tasks is the tool intended for? The tool is designed for 90° shoulder milling and general indexable-insert metalworking where WNMX 0603 inserts are appropriate. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Cutter Holder For APKT 1003 Indexable Inserts, 2 Cutting Edges, M2.5x5.5 Screw - Teknik Makina
Take advantage of a modular, reliable solution for indexable insert milling: the solid shank design with a 16 mm shank and two cutting edges delivers consistent engagement and straightforward insert changes, while compatibility with APKT 1003 inserts keeps tooling cost and downtime low — order via Metav Werkzeuge or consult the specialists for application advice. Schaftfräser S766TM – Indexable insert milling cutter, Ø 16 mm shank, Teknik Makina The Schaftfräser S766TM is a solid-shank milling cutter developed for indexable APKT 1003 inserts, intended for industrial milling stations and workshop tooling where rapid insert changes and consistent repeatability are required Compatible with APKT 1003 indexable inserts Ø 16 mm solid shank Overall length 85 mm Torx M2.5x5.5 fastener, key T8 Consistent production through indexable-insert modularity The combination of APKT 1003 compatibility and replaceable cutting tips provides a cost-effective route to sustained productivity. When a cutting edge wears, only the insert needs replacing rather than the entire cutter body, which reduces overall tooling expenditure and simplifies inventory management. This modular approach also shortens machine downtime for changeovers, supporting higher overall equipment effectiveness in batch and serial production. Secure clamping and dimensional reliability for repeatable results A solid Ø 16 mm shank and an 85 mm overall length provide a compact, rigid interface that aids concentricity and stability during milling. The head accepts two cutting edges, which balance chip load and help maintain cutting forces within predictable limits. Fastening is via Torx M2.5x5.5 screw secured with a T8 key, ensuring repeatable clamp torque and low risk of insert movement — key factors for maintaining surface quality and dimensional tolerance across series parts. Practical deployment with industry-standard inserts Designed specifically for the APKT 1003 family of indexable inserts (insert manufacturer: Palbit), this cutter integrates into common tooling systems without the need for special adapters. The tool body supports the established insert geometry, allowing familiar cutting parameters and toolpaths to be applied. For operations already standardised on APKT 1003 tips, the S766TM offers a direct upgrade path that preserves programming and process knowledge while refreshing the cutter hardware. Supply reliability and technical backing from a trusted partner Sourcing this cutter through Metav Werkzeuge brings the advantages of a broad industrial offering and a dependable logistics base in Emmerich. Metav’s proposition to democratise precision is backed by a wide product range and many satisfied customers, which supports fast replenishment and consistent quality control. For procurement teams and workshop planners, that translates into predictable supply and straightforward integration into existing tool sets. Choose the Teknik Makina S766TM for reliable indexable-insert milling; contact Metav Werkzeuge in Emmerich for technical guidance and supply details at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: S766TM Manufacturer: Teknik Makina Product: Shaft cutter for APKT 1003 indexable inserts Compatible inserts: APKT 1003 (Palbit) ECLASS: 21180806 ETIM: EC011860 Core measurements Diameter: 16 mm Shank diameter: 16 mm Overall length: 85 mm Number of cutting edges: 2 Features & compatibility Fastening: Torx M2.5x5.5 Torx key size: T8 Suitable for indexable insert milling systems Insert manufacturer reference: Palbit FAQ Which inserts fit this cutter? The cutter accepts APKT 1003 indexable inserts as specified; Teknik Makina designed the S766TM to work with APKT 1003 geometry and Palbit-manufactured tips. What is the shank diameter and overall length? The S766TM has a Ø 16 mm shank and an overall length of 85 mm, dimensions that suit many common milling setups and collet systems. How are the inserts secured to the cutter? Inserts are clamped with a Torx M2.5x5.5 screw; assembly and removal are performed using a T8 Torx key to ensure consistent clamp torque for the S766TM. Is this cutter suitable for automatic insert changes in production? The S766TM is designed for indexable-insert workflows where inserts such as APKT 1003 are replaced as part of normal maintenance; Teknik Makina engineered the tool for repeatable insert seating and straightforward servicing. Where can technical data and purchasing support be obtained? For detailed technical specifications and procurement, Metav Werkzeuge can supply application guidance and availability information for the Teknik Makina S766TM (SKU S766TM). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Cutters 90° Shank Mill for ANHX 1004-1206 Indexable Inserts, 2 Flutes, 25mm Cutting Length - Teknik Makina
Benefit from a 16 mm shank and a 90° cutting geometry combined with fast indexable-insert changes; the two-edge design provides efficient material removal and low vibration for consistent shoulder milling. Order the shank milling cutter directly via Metav Werkzeuge or ask our consultants if required. Shank milling cutter S775TM – 90° cutter, Ø16 mm, for ANHX 1004-1206 indexable inserts (Teknik Makina) Shank milling cutter S775TM for precision shoulder milling with ANHX-series indexable inserts, designed for rigid toolholding and reliable insert clamping in industrial machining applications. 90° cutting angle for precise shoulder milling 16 mm shank diameter for rigid toolholding Compatible with ANHX 1004-1206 indexable inserts Secure clamping with M3x7 Torx screw, T8 key Stable rigidity for repeatable shoulder milling The combination of a 16 mm shank and a compact overall length delivers a stable cutting platform that reduces deflection and improves dimensional consistency. With a true 90° cutting geometry the tool produces square shoulders and clean part faces, translating the cutter’s mechanical stability into predictable cycle times and reduced rework. For operations where positional accuracy and surface integrity matter, the robust shank helps maintain cutting parameters and extend effective tool life. Fast insert changes and proven compatibility Designed for ANHX-series tooling, the holder accepts ANHX 1004-1206 indexable inserts and pairs with inserts from Palbit, enabling rapid plate replacement and minimal downtime. The clamping system uses an M3x7 Torx screw and a T8 key for secure fixation, ensuring repeatable seating without complicated procedures. Quick access to the insert seat reduces non-productive time and supports lean production workflows, making the cutter suitable for batch and series machining where fast tool swaps are essential. Efficient cutting with low vibration and serviceability Equipped with two cutting edges, the cutter balances material removal rate and surface finish, delivering efficient machining for shoulder and face operations. The specified cutting length of 25 mm provides ample engagement for many common pocketing and profiling tasks without sacrificing stiffness. Lightweight at 0.14 kg, the tool is easy to handle during set-up yet engineered to minimise chatter under appropriate machining parameters, supporting consistent surface quality and longer insert life. Contact Metav Werkzeuge for a tailored quote and to confirm compatibility with specific inserts or toolholders; available from stock in Emmerich – eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical data SKU: S775TM Product name: Shank milling cutter Designation: for ANHX 1004-1206 Indexable Inserts Manufacturer (raw data): Teknik Makina Facts Shank diameter: 16 mm Cutting length: 25 mm Overall length: 90 mm Weight: 0.14 kg Cutting angle: 90° Number of cutting edges: 2 Special features Compatible insert series: ANHX 1004-1206 Compatible insert manufacturer: Palbit Clamping screw: M3x7 Torx Torx key size: T8 Application: shoulder milling / indexable insert system FAQ Which inserts fit this cutter best? The S775TM shank milling cutter is specified for ANHX 1004-1206 indexable inserts; inserts from Palbit are explicitly compatible with this holder. How is the insert secured on the cutter? Insert fixation is achieved with an M3x7 Torx screw tightened using a T8 key, providing secure and repeatable clamping for the ANHX plates. What diameter and length does the shank provide? The tool features a 16 mm shank diameter with a cutting length of 25 mm and an overall length of 90 mm, offering a balance of rigidity and reach. How many edges does the cutter use and what is the benefit? The holder utilises two cutting edges, which allows efficient material removal while maintaining good surface finish and manageable cutting forces. Is the S775TM suitable for heavy interrupted cuts? The robust 16 mm shank and secure clamping reduce deflection risk; for heavy interrupted cuts, appropriate insert geometry and cutting parameters are recommended to match the application. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm End Mill 90° For APKT 0903 Indexable Inserts, 40mm Cutter Length - Teknik Makina
Take advantage of a precise 90° shoulder milling solution with secure clamping and straightforward insert changes; the combination of robust design, compatibility with APKT 0903 indexable inserts and low tool weight supports efficient production. Order the cutter directly via Metav Werkzeuge or consult the technical team for specification checks. Shank Cutter S204TM — 90° for APKT 0903 Indexable Inserts (Teknik Makina) The Shank Cutter S204TM is a 90° shank milling cutter designed for shoulder and face milling applications using APKT 0903 indexable inserts. 90° cutting angle for shoulder milling Fits APKT 0903 indexable inserts 16 mm shank diameter for secure clamping Two cutting edges for efficient removal Precision performance for repeatable shoulder milling The cutter body delivers a 90° cutting angle that simplifies shoulder and face milling operations and reduces setup complexity. With a compact 16 mm shank and a straight cutting length of 40 mm, the tool offers a balance between rigidity and access, enabling stable cuts with reduced vibration. The combination of a slim shank and a 120 mm overall length supports versatile use in many machine setups while maintaining consistent concentricity for repeatable results. Fast insert changes and secure clamping reduce downtime Designed for indexable inserts of type APKT 0903, the tool accepts standard inserts held by a Torx screw, specified as M2.5 x 5.5, using a T8 key for quick and reliable replacement. The two cutting edges configuration lowers replaceable-wear costs and simplifies inventory management compared with multi-edge tools. As a result, tool changeovers are quick, maintenance time is minimised and production availability improves without compromising cutting stability. Compact, lightweight design for flexible workshop integration At a weight of 0.185 kg and with a 16 mm diameter, the cutter body is easy to handle and mounts cleanly in standard tool holders, supporting machine spindle balance and reducing inertia during acceleration. The construction suits common milling tasks where a firm clamping interface and a defined shoulder geometry are required. This makes the tool suitable for both small-batch work and repetitive production runs where consistent edge engagement is essential. Contact Metav Werkzeuge for procurement advice on the Teknik Cutting Tools Shank Cutter S204TM — reliable supply from Emmerich; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S204TM Brand: Teknik Makina Designation: Shank cutter for APKT 0903 indexable inserts Facts Shank diameter: 16 mm Cutting length: 40 mm Overall length: 120 mm Number of cutting edges: 2 Cutting angle: 90° Diameter: 16 mm Weight: 0.185 kg Special features Fits inserts: APKT 0903 Compatible inserts manufacturer: Walter Torx screw: M2.5 x 5.5 Torx key: T8 FAQ What inserts does this cutter accept? The cutter accepts APKT 0903 indexable inserts and is designed to secure them reliably for shoulder and face milling. How is the insert fixed in the tool? Inserts are retained with a Torx screw (M2.5 x 5.5) requiring a T8 key for installation and removal. What is the shank diameter and why does it matter? The shank diameter is 16 mm; this dimension ensures a secure clamping interface and contributes to concentric running in standard collets and holders. Is this cutter suitable for heavy roughing? The two-edge configuration and 90° geometry favour accurate shoulder milling and moderate material removal; suitability for heavy roughing depends on machine power and cutting parameters. Which brand manufactures the tool and who supplies it? The tool is produced by Teknik Cutting Tools and supplied through Metav Werkzeuge as the responsible distributor (see manufacturer details below). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm End Mill 90° For BDMT 11T3 Indexable Inserts, 2 Cutting Edges 150mm - Teknik Makina
Take advantage of precise shoulder milling with a compact, indexable solution: high compatibility with BDMT 11T3 inserts, a 16 mm shank for secure clamping and a true 90° cutting angle for right-angled shoulders — order the shaft cutter directly via Metav Werkzeuge or consult the technical team for application advice. Shaft cutter S565TM — 16 mm shank, 90° for BDMT 11T3 indexable inserts (Teknik Makina) The Shaft cutter S565TM is a shank milling tool designed for face and shoulder milling with BDMT 11T3 indexable inserts, suitable for industrial steelworking and series production. Compatible with BDMT 11T3 Kyocera inserts 16 mm shank diameter 90° cutting angle for square shoulders 45 mm cutting length, 2 cutting edges Consistent shoulder geometry and production speed The 90° cutting angle and robust head geometry provide repeatable right-angled contours, which reduces finishing steps and improves process stability in series work. With indexable inserts such as BDMT 11T3, tool setups become more predictable: worn edges are replaced swiftly, minimising machine downtime and keeping cycle times low. This combination supports lean production strategies by favouring predictable tool life and easier reconditioning. Secure clamping and dimensional stability for higher throughput A 16 mm shank ensures stable seating in standard tool holders and supports higher feed rates with reduced vibration. The 45 mm cutting length is balanced for shoulder and face milling tasks, while the tool’s compact overall length promotes accessibility in confined fixtures. The cutter’s two cutting edges simplify edge management and can be used to streamline inventory for common machinable geometries, aiding both maintenance scheduling and throughput planning. Fast insert changes and workshop-friendly maintenance Insert retention is secured with a Torx fastener (M2.5 x 5.5) operated by a T8 key, allowing quick, tool-room-safe insert changes that limit stoppages. The design is optimised for indexable inserts from established suppliers such as Kyocera, which eases sourcing and compatibility checks. For operations seeking pragmatic solutions, the result is a reliable toolholder system that supports consistent part quality and straightforward upkeep. For reliable right-angled milling with BDMT 11T3 inserts, contact Metav Werkzeuge in Emmerich for tailored technical advice and assured supply of the Teknik Makina S565TM — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S565TM Manufacturer: Teknik Makina Product designation: Shaft cutter for BDMT 11T3 indexable inserts Compatible inserts: BDMT 11T3 Suitable insert manufacturer: Kyocera Torx screw: M2.5 x 5.5 Torx key: T8 Core data Shank diameter: 16 mm Cutting length (shank cutting): 45 mm Overall length: 150 mm Diameter: 16 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 0.232 kg Special features Indexable insert system for quick edge replacement Compact design for constrained fixtures Two-edge configuration for straightforward edge rotation Torx retention for secure clamping Suited to series steelworking applications FAQ Which inserts fit this cutter? The cutter accepts BDMT 11T3 indexable inserts; matching grades from Kyocera are commonly used with the S565TM for robust performance. Is the shank size standard for common tool holders? Yes, the 16 mm shank accommodates standard 16 mm tool holders, offering secure clamping and good torsional stability. How is the insert secured and changed? Inserts are secured with a Torx screw (M2.5 x 5.5) tightened or released using a T8 key for fast, repeatable maintenance. What operations is the cutter intended for? The tool is optimised for shoulder and face milling where a 90° cutting angle is required, providing true right-angled surfaces in series production. How many cutting edges does the tool have? The tool uses two cutting edges, enabling efficient edge rotation and simple stock management for production runs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm End Mill for ADKT 10T3 Indexable Inserts Internal Coolant, 2 Flutes, 25mm Cutting Length - Teknik Makina
Take advantage of a rigid 16 mm shank and internal coolant to increase machining stability and tool life; the compatibility with ADKT 10T3 indexable inserts provides flexibility and inventory efficiency. Order this cutting solution directly via Metav Werkzeuge or consult our specialists for application advice. Teknik Makina Shank milling cutter S074TM — 16 mm shank, internal coolant, for ADKT 10T3 indexable inserts Teknik Makina Shank milling cutter S074TM is a precision shank milling cutter designed for use with ADKT 10T3 indexable inserts in medium-duty milling and finishing operations 16 mm shank for rigid clamping Internal coolant for improved chip evacuation Compatible with ADKT 10T3 indexable inserts Compact 90 mm overall length for tight fixtures Precision and compatibility for insert milling that reduces setup complexity The shank milling cutter is built for consistent engagement with ADKT 10T3 indexable inserts, enabling quick insert changes and repeatable results in batch production. Compatibility with Korloy inserts simplifies procurement and reduces variant stock while maintaining edge geometry suited to finishing passes. The combination of insert-based tooling and a standardised shank means a single toolholder inventory can cover several machining tasks, increasing throughput and reducing setup time without compromising accuracy. Design features that support higher process reliability and cooling A 16 mm shank provides axial rigidity for stable cutting, while the internal coolant channel delivers coolant directly to the cutting zone, improving chip control and reducing heat build-up. The tool has a 25 mm cutting length and two cutting edges, which are arranged for efficient material removal in finishing and light roughing. Insert retention uses a Torx screw specified as M2.5x5.5 and requires a T8 Torx key for secure clamping; this standardised clamping method ensures fast insert replacement and reduces the risk of misalignment during service. Handling, maintenance and supply assurance for workshop use Routine handling is straightforward: insert replacement and screw torque are based on the supplied Torx key and screw dimensions, limiting downtime. The tool’s 90 mm overall length balances reach and rigidity for use in confined fixtures. For procurement and ongoing supply, Metav Werkzeuge acts as a reliable distribution partner with a broad selection of industrial tools and responsive order handling, backed by a large customer base and central stock in Emmerich. For technical clarifications on machining parameters or to confirm insert selection, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. For reliable insert milling with internal coolant, contact Metav Werkzeuge to discuss availability and suitability of the Teknik Makina shank milling cutter S074TM and secure your tooling solution today. Technical data Article number: S074TM Manufacturer: Teknik Makina Product type: Shank milling cutter Label: 16mm Schaftfräser ADKT 10T3 L90mm mit Innenkühlung SKU: S074TM Facts Shank diameter: 16 mm Overall length: 90 mm Cutting length: 25 mm Number of cutting edges: 2 Weight: 0.11 kg Internal coolant: yes Special features Compatible with ADKT 10T3 indexable inserts Recommended insert manufacturer: Korloy Torx key: T8 Torx screw: M2.5x5.5 Suitable for medium-duty milling and finishing FAQ Which inserts fit this shank milling cutter? The cutter is designed for ADKT 10T3 indexable inserts; it is typically used with Korloy inserts for a broad range of finishing applications with the Teknik Makina shank milling cutter S074TM. How is coolant supplied to the cutting zone? Coolant is delivered via the built-in internal coolant channel, which directs fluid to the insert edge to aid chip evacuation and reduce cutting temperatures during operation. What clamping hardware is required for insert changes? Insert retention uses a Torx screw M2.5x5.5; replacement and clamping are performed with a T8 Torx key as specified for the Teknik Makina shank milling cutter S074TM. Is the tool suitable for tight fixtures? Yes — the 90 mm overall length provides a compact footprint that is suitable for many confined setups while maintaining adequate reach for standard workpieces. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
High-performance shank cutters and ball nose cutters for efficient milling
Insert shank cutters and ball nose cutters combine flexibility and productivity for a wide range of milling tasks. The category covers steel-bodied shank cutters fitted with indexable inserts for economical roughing, face milling, cornering and slotting, as well as ball nose cutters for contouring and 3D finishing.
How these tools work and where they belong
Shank cutters with indexable inserts use a carrier body made from hardened steel; the cutting edges are provided by removable inserts rather than a solid tool blank. Where tools do not have internal coolant, process heat and chips are managed via external coolant nozzles or compressed air, which is sufficient for open, surface-level and easily accessible milling on standard materials. Shank cutters with internal coolant feature fine internal channels that deliver coolant or blasting air directly to each cutting edge under pressure. This targeted supply is essential for deep pockets, cavities, full slotting and machining of heat-resistant or difficult-to-machine materials, because it prevents chip re-cutting, protects cutting edges from thermal overload and enables higher feed rates and improved surface quality.
Cut cycle times and reduce tooling costs
- Replaceable indexable inserts reduce consumable costs and shorten tool change time.
- Targeted internal coolant improves chip evacuation and extends insert life.
- Robust steel carrier bodies enable heavy-duty roughing without frequent tool replacement.
- Suitable for roughing, planing, corner milling and slot milling as well as precision 3D profiling with ball nose cutters.
A practical choice for purchasing and stocking tools
Metav brings a pragmatic purchasing advantage: a broad range of milling solutions is available from a single European quality hub. Metav’s focus on democratising precision means workshops benefit from a wide assortment, consistent quality control from Emmerich and steady supply — supported by decades of expertise and over 48,000 satisfied customers. Choose Metav for a centralised sourcing strategy that reduces supplier complexity while keeping access to both insert milling cutters (also referred to as insert milling cutters or indexable end mills) and ball nose cutters (also known as ball nose end mills or radius cutters) straightforward.
Quick summary
Insert shank cutters and ball nose cutters deliver flexible, cost-effective milling: replaceable inserts lower running costs, and internal coolant options enable higher performance and longer tool life where chip control is critical.
FAQ
When should I choose a shank cutter with indexable inserts rather than a solid carbide end mill?
Choose shank cutters with indexable inserts for economical roughing and high-stock-removal tasks where replacing inserts is preferable to replacing an entire tool; they are especially effective for face milling, cornering and slotting operations.
Does internal coolant make a measurable difference for ball nose cutters?
Yes. Internal coolant directed to each cutting edge reduces chip re-cutting and thermal stress, which improves surface finish and increases insert life when machining deep pockets, cavities or heat-resistant materials.
Can shank cutters without internal coolant be used for general workshop milling?
Absolutely. Tools without internal coolant rely on external coolant nozzles or compressed air and are well suited to open, superficial and easily accessible milling on standard materials.
What milling operations are shank cutters for indexable inserts typically used for?
Shank cutters with indexable inserts excel at economical roughing, planfräsen (face milling), corner milling and slot milling; ball nose cutters are the preferred choice for 3D profiling and finishing operations.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com