Efficient shaft cutters and ball nose cutters for versatile milling
Shaft cutters and ball nose cutters serve as robust rotating tools for roughing, face milling, corner milling and slotting, offering economical replacement of indexable inserts rather than whole solid tools. Available in versions with internal coolant to feed lubricant directly to each cutting edge or without internal coolant relying on external nozzles, these cutters ensure effective chip evacuation and thermal control suited to standard materials or deep pocket and cavity work. By preventing chip re-cutting and protecting cutting edges, they deliver higher feed rates, improved surface finish and extended tool life in demanding metalworking applications.
16mm End Mill For ADKT 10T3 Indexable Inserts With Internal Coolant, 180mm - Teknik Makina
Take advantage of a robust combination of reach and coolant-through performance for reliable chip control and longer tool life; the 16 mm shank and 180 mm overall length deliver access to recessed features while maintaining stability. Order the tool through Metav Werkzeuge or contact our advisers for tailored technical guidance. Shaft milling cutter S075TM — 16 mm shank, internal coolant (Teknik Makina) The shaft milling cutter S075TM is a long-reach indexable milling tool engineered for ADKT 10T3 inserts, offering internal coolant and a compact 16 mm shank for precise machining in confined setups 16 mm shank diameter Internal coolant supply 180 mm overall length Accepts ADKT 10T3 inserts 2 cutting edges for stable cutting Improved reach with controlled rigidity A 180 mm overall length combined with a 16 mm shank provides extended reach for recessed pockets and deep features while preserving lateral rigidity. The short cutting portion of 25 mm ensures the cutting geometry remains stiff under load, reducing chatter and producing consistent surface quality. For machining centres where tool overhang and run-out are critical, this design balances access and stability to maintain repeatable results across batches. Coolant-through design for longer tool life The integrated internal coolant channel directs cutting fluid straight to the insert seat, improving chip evacuation and cooling at the cutting edge. This reduces thermal stress on the insert and substrate, which in turn extends insert life and helps sustain cutting parameters for greater productivity. The coolant-through feature also supports better surface finishes by flushing chips away from the cutting zone, lowering the risk of re-cutting and edge damage. Fast retooling and secure insert clamping Compatibility with ADKT 10T3 indexable inserts and the specified Torx fixing details (T8 key, screw M2.5x5.5) enables swift insert changes and secure clamping. The cutter accepts Korloy-manufactured inserts, simplifying tool management where Korloy grades are standard. The two cutting edges provide an efficient balance between material removal rate and stability, making the tool suitable for profiling, light shoulder milling and slotting operations where indexable tooling is preferred. Production-ready design and serviceability Finished to industry tolerances and weighing just 0.19 kg, the tool is optimised for high-volume use without unnecessary mass. The combination of a standard 16 mm shank diameter and common insert format reduces inventory complexity and supports quick reconditioning cycles. Spare parts and replacement inserts follow common market formats, so scheduled maintenance and insert rotation integrate smoothly into existing production routines. For availability of the Teknik Makina shaft milling cutter S075TM with internal coolant, contact Metav Werkzeuge for personalised advice and reliable supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S075TM Manufacturer: Teknik Makina Product type: Shaft milling cutter Suitable inserts: ADKT 10T3 Compatible insert brand: Korloy Internal coolant: yes Facts Shank diameter: 16 mm Overall length: 180 mm Cutting length: 25 mm Cutting edges: 2 Weight: 0.19 kg Torx key: T8 Torx screw: M2.5x5.5 eClass: 21180806 Special features Coolant-through design Long-reach form factor Indexable insert system Fast insert replacement with Torx fastening Lightweight construction for reduced spindle load FAQ Which inserts fit this cutter? The cutter accepts ADKT 10T3 indexable inserts; Korloy-compatible grades are specifically noted for use with this tool. Is the tool coolant-through and how does that help? Yes — the internal coolant channel delivers fluid directly to the insert zone, improving chip evacuation and extending insert life under higher cutting parameters. What shank size and overall length does the tool have? The tool features a 16 mm shank and a 180 mm overall length, giving extended reach while maintaining rigidity for stable machining. How are inserts secured and what fasteners are required? Inserts are fixed with a Torx screw; the specified key is T8 and the screw size is M2.5x5.5 for secure clamping and straightforward replacement. Can this cutter be used in standard 16 mm toolholders? Yes — the standard 16 mm shank diameter is compatible with common 16 mm collets and toolholders, facilitating integration into existing setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm End Mill for APKT 0903 Indexable Inserts Internal Coolant, 40mm Cutting Length - Teknik Makina
Take advantage of the combination of a slim 16 mm shank, internal coolant and compatibility with APKT 0903 indexable inserts for stable, chip‑managed milling. Order the shank milling cutter directly via Metav Werkzeuge or consult the technical team for specific machining parameters. Shank milling cutter S204-1TM — for APKT 0903 indexable inserts, 16 mm shank (Teknik Makina) A Shank milling cutter S204-1TM engineered for precision milling with APKT 0903 indexable inserts, featuring a 16 mm shank and internal coolant to maintain cutting performance in demanding production environments. 16 mm shank diameter for standard toolholders Internal coolant for improved chip evacuation Compatible with APKT 0903 indexable inserts Robust body length L120 mm for stable machining Stability and repeatable machining accuracy for indexable milling The S204-1TM holder is built around a 16 mm shank that delivers high clamping rigidity in common toolholders, reducing vibration and enhancing surface finish. With integrated internal coolant, the tool supports efficient chip evacuation and cooling close to the cutting edge, which lowers cutting temperatures and helps extend insert life. Designed for indexable insert systems, the holder maintains positional repeatability so that each insert index produces consistent results, supporting predictable cycle times and reduced rework. Fast maintenance and secure insert fixation for uninterrupted production Serviceability has been prioritised: the body accepts APKT 0903 inserts and secures them with a Torx screw specification M2.5x5.5 tightened with a T8 key, enabling swift insert replacement and minimal downtime. The two cutting edges support economical machining strategies by allowing multiple indexings before a tool change is required. At a lightweight of 0.185 kg, the assembly is easy to handle during tool preparation while still providing the mass necessary for damping under cut, promoting steady cutting conditions across the advertised cutting length. Proven compatibility and dependable sourcing for the workshop Compatibility with Walter-manufactured inserts broadens tooling options and simplifies stocking decisions for production managers. The S204-1TM body (L120 mm overall, 40 mm cutting portion) is suitable for small to medium series milling where indexable solutions are preferred for cost efficiency and process control. Sourced from Teknik Makina and distributed through Metav Werkzeuge, the component benefits from reliable European logistics and technical support that help integrate the tool into existing machining processes with minimal disruption. Request a tailored quote or machining recommendation from Metav Werkzeuge for the Teknik Makina S204-1TM shank milling cutter with internal coolant; technical enquiries via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Product type: Shank milling cutter SKU: S204-1TM Manufacturer: Teknik Makina Facts Shank diameter: 16 mm Overall length: 120 mm Cutting length (shank): 40 mm Number of cutting edges: 2 Weight: 0.185 kg Special features Internal coolant Compatible with APKT 0903 indexable inserts Compatible with inserts by Walter Torx key: T8 Torx screw: M2.5x5.5 FAQ What inserts fit this milling cutter? The shank milling cutter accepts APKT 0903 indexable inserts and is specified as compatible with inserts from Walter. Is internal coolant included and how does it help? Internal coolant is integrated in the S204-1TM body to deliver cutting fluid directly to the insert edge, improving chip control and extending insert life. What is the required screw and key for insert clamping? Insert clamping uses a Torx screw sized M2.5x5.5, tightened with a T8 Torx key to ensure secure fixation. How long is the tool and what is the effective cutting length? The tool has an overall length of 120 mm with a cutting portion (shank) of 40 mm designed for reliable engagement with the insert. Can the tool be used in standard 16 mm toolholders? Yes, the 16 mm shank diameter is suitable for standard toolholders that accept a 16 mm shank. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm End Mill for APKT 1003 Indexable Inserts Internal Coolant, 2 Flutes, 30mm Cutting Length - Teknik Makina
Take advantage of a compact, 16 mm shank design paired with internal coolant for longer tool life and consistent chip control; compatible with APKT 1003 indexable inserts for rapid insert changes. Order directly via Metav Werkzeuge or ask our consultants for application guidance. Insert milling cutter S031-1TM — 16 mm shank, internal coolant (Teknik Makina) An insert milling cutter S031-1TM designed for use with APKT 1003 indexable inserts, combining secure clamping and directed coolant for stable milling operations 16 mm shank diameter Internal coolant supply Compatible with APKT 1003 inserts 30 mm cutting length Improved coolant management for longer tool life The built-in internal coolant channel directs cutting fluid straight to the cutting edge, reducing heat at the chip formation zone and improving surface quality. For tasks that alternate between high feed and interrupted cuts, the targeted coolant flow supports more consistent tool temperatures, which reduces thermal wear and lowers the risk of premature edge breakdown. This results in longer tool life and fewer insert changes, translating into less downtime for the production line and more predictable maintenance planning. Stable clamping and repeatable accuracy A 16 mm shank with a 100 mm overall length provides a compact, rigid connection between spindle and cutter body, reducing vibration and improving dimensional consistency. The tool accepts APKT 1003 indexable inserts and uses M2.5x5.5 screws with a Torx T8 drive for secure, repeatable seating. With two cutting edges and a 30 mm cutting length, the design balances material removal with controlled cutting forces, supporting stable finishes and repeatable results across batches. Fast setup and workshop compatibility Compatibility with common insert formats and the YG-1 insert range simplifies stock management and reduces sourcing complexity. The lightweight construction (approx. 0.275 kg) makes handling during tool changes straightforward, while standard fastening hardware minimises the need for specialist tools. The cutter’s balance of rigidity and accessibility supports both small-series production and routine workshop jobs, enabling smooth integration into existing tool pools without extensive requalification. Contact Metav Werkzeuge for tailored technical advice on the Teknik Makina S031-1TM insert milling cutter or to arrange direct supply from our Emmerich hub: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: S031-1TM UID: S031-1TM Product type: Insert milling cutter (shank cutter) Numbers / Core technical data Shank diameter: 16 mm Overall length: 100 mm Cutting length: 30 mm Number of cutting edges: 2 Weight: 0.275 kg Compatible insert type: APKT 1003 Designs / Special features Internal coolant supply Fastening: Torx T8, screw M2.5x5.5 Compatible insert manufacturer: YG-1 Manufacturer: Teknik Makina FAQ Is the cutter compatible with APKT 1003 inserts from different manufacturers? The S031-1TM accepts APKT 1003 indexable inserts and is listed as compatible with inserts from YG-1; inserts meeting the APKT 1003 specification from other reputable makers are typically suitable when dimensions and clamping features match. Does the tool provide internal coolant to the cutting edge? Yes, internal coolant is integrated into the cutter body to deliver cutting fluid directly to the insert edge, improving chip evacuation and reducing thermal wear on the insert. What drive and fastening hardware are required for insert changes? Insert clamping uses a Torx T8 driver and M2.5x5.5 screws for secure fastening, enabling quick and repeatable insert replacement. What are the main dimensional features to consider when fitting this cutter? Key dimensions are a 16 mm shank diameter, 100 mm overall length, and 30 mm cutting length; these determine rigidity and reach for specific milling setups. Is the S031-1TM suitable for high-speed milling? The tool’s compatibility with APKT 1003 inserts and internal coolant supports elevated cutting conditions, but final speed and feed values depend on the chosen insert grade and the workpiece material. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm End Mill for APKT 1003 Indexable Inserts Internal Coolant, L120mm - Teknik Makina
Take advantage of the combination of internal coolant, a 16 mm shank and a 40 mm cutting length for reliable chip control and consistent surface finish; the tool supports efficient machining with APKT 1003 inserts and is supplied by Teknik Makina via Metav Werkzeuge — order the cutter directly through Metav Werkzeuge or consult their advisors for selection support Shank milling cutter for APKT 1003 indexable inserts – 16 mm shank, internal coolant (Teknik Makina) Shank milling cutter for APKT 1003 indexable inserts designed for precision face milling and slotting where controlled coolant delivery is required 16 mm shank diameter Internal coolant supply Compatible with Korloy APKT 1003 120 mm overall length High-performance routing for repeatable production results This indexable cutting system pairs a compact 16 mm shank with an optimised 40 mm cutting length to deliver stable machining in short-reach applications. The combination of a rigid shank and the tool geometry reduces vibration and improves surface finish, while the internal coolant channel directs cutting fluid precisely to the cutting edge for improved chip evacuation and tool life. The construction supports higher material removal rates with consistent dimensional accuracy, making it a pragmatic choice for small-batch production and toolrooms where repeatability matters Clear compatibility and insert handling explained Compatible with APKT 1003 indexable inserts and designed to accept inserts from Korloy, the cutter simplifies inventory and insert management. The tool uses a Torx fastening system (Torx T8) with a M2.5x5.5 screw for secure seating of the inserts; this combination ensures reliable clamping and quick insert changes. For operators unfamiliar with insert nomenclature: APKT denotes a triangular, negative-geometry insert suitable for medium to heavy milling—its shape provides three effective edges and consistent chip control when paired with the correct cutter body Practical shop-floor advantages and ease of use The compact footprint and 120 mm overall length support accessibility in confined setups and multi-axis machines. With two cutting edges, the cutter offers a balance between cutting engagement and economy of inserts, enabling cost-effective machining cycles. The tool's modest weight (approx. 0.185 kg) and straightforward clamping mean reduced spindle load during rapid movements. These practical benefits translate to fewer tool changes, less machine downtime and reliable throughput for routine milling tasks Handling, maintenance and service considerations Maintenance is straightforward: replacement inserts and the Torx T8 key allow fast reconditioning of the cutting head without specialised fixtures. The internal coolant channel requires only routine flushing to avoid blockages; keeping the coolant pathway clear preserves consistent lubrication at the cutting zone and prolongs insert life. Supplied by Teknik Makina under SKU S162-1TM, the design prioritises workshop efficiency and repeatable set-ups, supporting both small businesses and industrial users with predictable performance Choose the Teknik Makina indexable cutter for consistent milling performance and contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich Technical data Article number: S162-1TM Product: Shank milling cutter for APKT 1003 indexable inserts Manufacturer: Teknik Makina ECLASS: 21180806 Facts Shank diameter: 16 mm Overall length: 120 mm Cutting length: 40 mm Weight: 0.185 kg Number of cutting edges: 2 Torx key: T8 Torx screw: M2.5x5.5 Special features Internal coolant Compatible with APKT 1003 indexable inserts Compatible insert manufacturer: Korloy Indexable cutter design for easy insert changes FAQ Which inserts fit the cutter and who supplies them? The cutter accepts APKT 1003 indexable inserts; Korloy-manufactured APKT 1003 inserts are compatible and commonly used with this type of indexable cutter How is coolant delivered to the cutting edge? Coolant is supplied through the internal channel built into the tool body, delivering fluid directly to the insert tip for improved chip evacuation and tool life What fastening hardware is required for insert changes? Insert clamping uses a Torx T8 key and M2.5x5.5 screw, allowing secure seating and quick replacement of inserts Is the tool suitable for lightweight and short-reach machining setups? Yes, the compact 16 mm shank and 120 mm overall length make the tool suitable for confined workspaces and short-reach milling operations Can the cutter handle continuous production tasks? The combination of rigid shank, internal coolant and indexable inserts supports reliable continuous machining with predictable tool-change intervals Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm End Mill for APKT 1003 Indexable Inserts With Internal Coolant, 30mm Cutting Length - Teknik Makina
A compact, robust shank milling cutter that pairs a 16 mm shank with internal coolant and APKT 1003 compatibility to deliver steady material removal and simplified tool changes. Benefit from precise chip evacuation and secure fastening — order directly via Metav Werkzeuge or ask our consultants for a tailored tooling plan. S140-1TM – Shank milling cutter with internal coolant, 16 mm shank (Teknik Makina) The S140-1TM is a shank milling cutter designed for indexable APKT 1003 inserts, delivering reliable internal coolant support for improved chip control in short-reach milling applications. 16 mm shank for compact toolholders Internal coolant improves chip evacuation Compatible with APKT 1003 Korloy inserts Secured with M2.5x5.5 Torx screw (T8) Reduced setup time with predictable cutting results The design focuses on efficiency: a 16 mm shank and 100 mm overall length create a compact tool that fits tight toolholders while maintaining rigidity. The short 30 mm cutting length concentrates cutting forces close to the holder, which reduces vibration and supports consistent surface finish. Compatibility with APKT 1003 indexable inserts means insert changes are quick and repeatable, lowering downtime in batch production. The tool’s modest mass also simplifies balancing and handling during frequent tool swaps. Improved process reliability through coolant-fed design Equipped with internal coolant, the cutter channels coolant directly to the cutting zone, which enhances chip evacuation and extends insert life under continuous operation. This internal feed is particularly effective when machining semi-finished components where consistent chip control prevents rework. The insert pocket is secured by an M2.5x5.5 Torx screw, tightened with a T8 key, ensuring a stable clamping interface that supports repeatable indexable insert seating and safe high-feed passes. Practical engineering for workshop integration With two cutting edges and a compact form factor, the cutter is suited to finishing and light roughing tasks where accessibility and repeatability matter. The shallow cutting length reduces leverage and helps maintain toolpath accuracy in milling cycles. The specification emphasises compatibility with Korloy APKT 1003 inserts, offering flexibility for shops that standardise on widely available insert grades and geometries. The S140-1TM is therefore a practical choice for manufacturers seeking dependable, easy-to-service indexable tooling. Supply and tooling guidance for procurement This shank milling cutter supports streamlined tool procurement and maintenance strategies: standardised insert format, small-format shank diameter and coolant capability all contribute to lower stocking complexity and clearer reordering criteria. For workshops aiming to reduce supplier count while maintaining precision, the tool aligns with those goals and integrates into common clamping systems used in modern CNC setups. Contact Metav Werkzeuge for a personalised quotation or to discuss how this Teknik Makina shank milling cutter with internal coolant can be integrated into existing tooling setups Technical data SKU: S140-1TM Manufacturer: Teknik Makina Product type: Shank milling cutter eClass: 21180806 Facts Shank diameter: 16 mm Overall length: 100 mm Cutting length: 30 mm Number of cutting edges: 2 Weight: 0.156 kg Special features Internal coolant Compatible with APKT 1003 indexable inserts by Korloy Secured with M2.5x5.5 Torx screw Torx key: T8 FAQ Which inserts fit this cutter? The cutter accepts APKT 1003 indexable inserts; compatibility was specified for Korloy APKT 1003 grades and geometries used in fine finishing and light milling operations. Is the cutter coolant-fed? Yes — the S140-1TM is equipped with internal coolant channels designed to deliver coolant directly to the cutting zone for improved chip control and longer insert life. What holder size is required? A 16 mm shank holder is required; the tool’s 16 mm shank diameter is intended for compact holders and standard collet or shrink-fit systems that accommodate that diameter. How is the insert secured? The insert pocket is secured with an M2.5x5.5 Torx screw tightened using a T8 key to ensure repeatable clamping and safe cutting conditions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm End Mill For APMT 0602 Indexable Inserts 90mm Overall, 4 Flutes - Teknik Makina
Take advantage of a compact, indexable cutter that combines straightforward maintenance, stable handling and immediate compatibility with common APMT 0602 systems; the result is reduced downtime and predictable tool performance. Order directly via Metav Werkzeuge or consult their specialists for fitment and availability. Indexable End Mill S005TM — 16 mm diameter, for APMT 0602 indexable inserts by Teknik Makina The Indexable End Mill S005TM is an insert-based milling cutter intended for general machining setups using APMT 0602 format inserts; it suits workshops and production cells that require fast insert changes and consistent repeatability with a 16 mm shank. Compatible with APMT 0602 indexable inserts 16 mm shank, 90 mm overall length 25 mm cutting length, 4 cutting edges Torx T6 screw M2x4.2 fastening High compatibility for standard insert systems and simple inventory control The cutter is designed around the APMT 0602 insert format, which keeps tooling logistics straightforward for shops using that common geometry. With a 16 mm shank and a 90 mm overall length, the tool mounts in standard collet or holder systems and supports economical stocking: only the small carbide inserts need replacing rather than the whole body. This approach reduces capital tied up in consumables and simplifies maintenance planning without changing existing clamping concepts. Operational advantages: fast changeovers and predictable machining Equipped with 4 cutting edges and a 25 mm cutting length, the tool provides even load distribution and steady cutting behaviour over short axial engagements. The indexable design allows insert replacement in seconds using the specified fastening hardware, which minimises interruption to production. The modest mass of 0.12 kg contributes to lower dynamic load on the spindle and eases handling during tool changes, supporting a rapid workflow in batch or single-part operations while helping maintain consistent cycle times. Mounting, maintenance and spare parts explained Assembly uses a Torx fastener; the specified key size is Torx T6 and the screw is M2x4.2, which are standard service items in most toolrooms. The cutter body accepts inserts from common manufacturers, notably Korloy, so replacement inserts are widely available. The 16 mm shank diameter requires a matching holder or collet: check the toolholder catalogue for 16 mm compatible clamping. Routine checks should include correct screw torque and seat cleanliness to ensure repeatable insert clamping and stable cutting performance. For supply, stock details and compatibility checks contact Metav Werkzeuge GmbH in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com to confirm availability and suitability for the intended machining setup. Technical Data Article number: S005TM Manufacturer: Teknik Makina Type: Indexable end mill for APMT 0602 inserts Compatible inserts manufacturer: Korloy Torx key: T6 Screw: M2x4.2 Facts Diameter: 16 mm Overall length: 90 mm Shank diameter: 16 mm Cutting length: 25 mm Cutting edges: 4 Weight: 0.12 kg Special features For APMT 0602 indexable inserts Quick insert replacement Suitable for standard tool holders with 16 mm shank Supplied with Torx fastening hardware FAQ Which inserts fit this cutter? The cutter accepts APMT 0602 indexable inserts; Korloy inserts with the same designation are compatible and commonly used with the S005TM from Teknik Makina. What fastening hardware is required for insert mounting? Insert clamping uses a Torx fastener — Torx T6 — and the specified screw size is M2x4.2; keep matching spares in the workshop for rapid replacement. Which toolholders are suitable for mounting the cutter? Holders or collets designed for a 16 mm shank are required; the 16 mm shank and 90 mm overall length conform to common holder dimensions. How many cutting edges are available and what is the cutting length? The tool has 4 cutting edges and a 25 mm cutting length, giving balanced engagement for short to moderate axial depths. Is the cutter easy to handle during tool changes? Yes — with a weight of 0.12 kg and indexable inserts, the S005TM offers low handling load and quick insert replacement to reduce changeover time. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm End Mill for APMT 0602 Indexable Inserts 90° Cutting Angle, 4 Flutes, 25mm Cutting Height - Teknik Makina
Benefit from a robust mix of compatibility with APMT 0602 indexable inserts, a 16 mm shank for rigidity and a 25 mm cutting height for deeper engagement — ideal for stable, repeatable milling. Order directly via Metav Werkzeuge or consult our specialists for specification support. S029TM Indexable milling cutter by Teknik Makina — for APMT 0602 inserts, 16 mm shank The S029TM is a compact indexable milling cutter designed for efficient face and slot milling using APMT 0602 indexable inserts, suited to production and jobbing-shop applications requiring predictable tool life and quick insert changes Compatible with APMT 0602 indexable inserts 16 mm shank for secure clamping 25 mm effective cutting height Four cutting edges for stable milling Reliable performance for high-duty milling operations The indexable milling cutter concept offers a cost-effective route to repeatable machining: replaceable inserts minimise downtime and keep tooling costs predictable. With a 16 mm shank, the tool provides the stiffness required for consistent chip formation, while the four cutting edges balance radial forces for smoother operation. The 90° cutting angle facilitates face milling and shoulder operations, delivering a flat, accurate surface without complex set-up changes. Fast, secure insert changing reduces non-productive time Set-up and maintenance are simplified by the standardised insert system and secure screw fixing. The cutter uses a Torx M1.8x4.1 clamping screw, tightened with a T6 key, ensuring reproducible torque and minimal play at the insert pocket. This design reduces the risk of incorrect seating and supports quick index-and-go maintenance, which translates into better machine utilisation and lower assembly overhead in batch production. Straightforward specification for purchasing and stocking The tool’s geometry — 16 mm nominal diameter and 25 mm cutting height — makes it straightforward to plan toolholders and tool inventory. Stocking a small range of insert grades for APMT 0602 provides flexibility across a range of steels and aluminium alloys where indexable inserts are appropriate, while also reducing the number of full-diameter solid cutters required. The compact overall length and standard shank diameter ease integration into existing tool management systems. Consistent results and predictable lifecycle Designed with industrial production in mind, the cutter offers repeatable performance across runs: the combination of robust shank dimensions and standardised insert fixation supports predictable wear patterns. That predictability aids maintenance scheduling and cost accounting, and the ability to rotate or replace inserts extends tool life without the need for regrinding. For shops seeking reliability with efficient consumable handling, this milling solution is practical and economical. Contact Metav Werkzeuge for tailored ordering and technical clarification on the Teknik Cutting Tools S029TM — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable insert grades and supply options Technical Data Article number: S029TM Manufacturer: Teknik Makina ECLASS: 21180806 Core specifications Shank / diameter: 16 mm Cutting height: 25 mm Overall length: 120 mm Cutting angle: 90° Cutting edges: 4 Weight: 0.16 kg Compatible inserts: APMT 06 / APMT 0602 Compatible insert manufacturer: Korloy Torx screw: M1.8x4.1 Torx key size: T6 Special features Indexable milling cutter design Replaceable APMT 0602 inserts Four-edged cutter for balanced cutting Compact overall length for versatile use FAQ Which inserts fit this cutter? The cutter accepts APMT 06 series inserts, specifically the APMT 0602 size; Korloy-specified grades are compatible with the tool geometry. What shank diameter is required for mounting? Shank and nominal diameter are 16 mm, suitable for holders that clamp 16 mm shanks. How deep can the cutter engage the workpiece? The tool provides an effective cutting height of 25 mm, allowing deeper single-pass engagement compared with short-profile cutters. What fastener and key are used to secure inserts? Inserts are fixed with a Torx M1.8x4.1 screw and require a T6 Torx key for secure, repeatable tightening. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm End Mill for APMT 11T3 Indexable Inserts With Internal Coolant, 30mm Cutter Length - Teknik Makina
Take advantage of a compact, reliable milling solution that combines a 16 mm shank, internal coolant and compatibility with APMT 11T3 indexable inserts for stable production runs; order the S230-1TM directly via Metav Werkzeuge or consult our team for process integration. Shank milling cutter S230-1TM — 16 mm shank, internal coolant (Teknik Makina) The Shank milling cutter S230-1TM is designed for APMT 11T3 indexable inserts and suited to precision milling tasks where secure clamping and coolant-fed cutting increase reproducibility and throughput. 16 mm shank diameter Internal coolant for stable cutting Compatible with APMT 11T3 (Korloy) inserts 180 mm overall length, 30 mm cutting length Precision milling with indexable inserts for efficient chip removal The S230-1TM is an insert milling cutter built to deliver repeatable results in batch and single‑piece production. Fitted for APMT 11T3 inserts, the tool combines the flexibility of indexable cutting edges with a compact geometry that supports efficient material removal. With 2 cutting edges, the design balances cutting force and surface finish, making it suitable for general milling tasks and where predictable tool life is a priority. The indexable system reduces downtime for edge changes and keeps productivity high. Coolant-fed design to protect inserts and improve consistency An internal coolant supply ensures the cooling medium is delivered close to the cutting zone; this design reduces thermal loading and improves chip evacuation. The result is longer insert life and a lower risk of built-up edge on the insert relief face, which supports consistent part quality over longer cycles. For operations that require tight tolerances, the coolant-fed concept helps preserve dimensional stability and reduces the number of rework cycles. Stable clamping and compact dimensions for controlled machining A 16 mm shank and a 180 mm overall length with a 30 mm cutting length provide a compact tool body that resists deflection under load, improving surface finish and dimensional accuracy. Secure fastening is provided via the specified Torx fastening hardware (T8 key, M2.5x5.5 screw), delivering reliable insert seating and repeatable clamping torque. The tool’s modest mass (0.281 kg) aids rapid acceleration on CNC spindles while maintaining the rigidity required for consistent milling performance. Contact Metav Werkzeuge for technical matching to existing toolholders or to request the S230-1TM from stock in Emmerich — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: S230-1TM Article: Shank milling cutter for APMT 11T3 indexable inserts Brand: Teknik Makina Label: 16mm Schaftfräser APMT 11T3 L180mm mit Innenkühlung UID: S230-1TM Core dimensions Diameter: 16 mm Shank diameter: 16 mm Overall length: 180 mm Cutting length: 30 mm Cutting edges: 2 Weight: 0.281 kg Features & compatibility Internal coolant: yes Compatible inserts: APMT 11T3 Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M2.5x5.5 Product type: Shank milling cutter ECLASS: 21180806 FAQ What inserts fit this milling cutter? The S230-1TM accepts APMT 11T3 indexable inserts and is specified as compatible with Korloy insert types. Is the tool suitable for continuous production runs? Yes. The coolant-fed design and indexable insert system of the cutter support extended runs with predictable tool changes. How is the insert secured to the cutter? Inserts are fastened with the Torx screw M2.5x5.5 using a T8 key to ensure consistent clamping on the insert seat. What are the key dimensions to check for toolholder compatibility? Check the 16 mm shank diameter and 180 mm overall length against the toolholder and machine reach to ensure correct fit. How many cutting edges does the tool have and what is the machining implication? The cutter features 2 cutting edges, a configuration that balances chip thinning and stable cutting forces for general milling tasks. Can the internal coolant be used with standard machine coolant systems? Yes. The internal coolant connection is compatible with standard machine coolant supplies when properly routed through the toolholder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm End Mill For APXT 1003 Indexable Inserts 2 Flute, 90° Cutting Angle, 50mm Cutting Length - Teknik Makina
Benefit from the combination of a 16 mm shank, 50 mm cutting length and a secure Torx clamping system for reliable, repeatable milling operations; order the S173TM via Metav Werkzeuge or consult our advisors for integration into existing toolsets. S173TM shank cutter for APXT 1003 indexable inserts — 16 mm shank, 2 cutting edges (Teknik Makina) The S173TM is a shank cutter engineered for use with APXT 1003 indexable inserts, offering a compact overall length for machine compatibility and straightforward insert replacement. Robust 16 mm shank for secure holder fit 2 cutting edges for efficient material removal 50 mm cutting length for deeper machining Compatible with APXT 1003 indexable inserts Secure clamping for consistent results The solid 16 mm shank delivers high stability in standard tool holders, reducing vibration and improving surface finish during milling. At a weight of 0.23 kg, the tool maintains low inertia while offering the rigidity needed for indexed‑insert systems. This specification helps stabilise cutting forces and supports repeatable tool offsets in CNC routines, which in turn reduces setup time and contributes to predictable production cycles. Cost-efficient cutting with replaceable APXT 1003 inserts Designed around the APXT 1003 insert family, the cutter uses 2 cutting edges that enable efficient chip formation and even wear distribution. Inserts are secured by a Torx M2.5x5.5 screw tightened with a T8 key for fast, reliable changes. The indexable‑insert concept minimises tooling costs over time: only the insert is replaced when worn, not the entire tool body, making this shank cutter a pragmatic choice for workshops that balance performance and running costs. Reach and rigidity for typical milling tasks With an overall length of 150 mm and a dedicated cutting length of 50 mm, the design provides reach for moderate depths while keeping deflection low. The 90° cutting angle supports square‑shoulder milling and straightforward face operations, while the nominal 16 mm diameter ensures compatibility with a wide range of toolholders. These dimensions make the tool suitable for installations where access and tool clearance are constraints but rigidity cannot be compromised. Workshop integration and practical handling The shank cutter supports the Korloy range of inserts and is identified by SKU S173TM, simplifying procurement and inventory management. Its modular nature enables quick replacement cycles and predictable tool life planning. For manufacturers and contract workshops aiming for stable process output, this cutter integrates with existing indexable systems and reduces downtime associated with tool changes. For procurement advice, technical integration or to request the S173TM shank cutter with APXT 1003 compatibility, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: S173TM Manufacturer: Teknik Makina Product: Shank cutter for APXT 1003 indexable inserts SKU: S173TM Facts Shank diameter: 16 mm Cutting length: 50 mm Overall length: 150 mm Diameter: 16 mm Number of cutting edges: 2 Weight: 0.23 kg Cutting angle: 90° Special features Compatible inserts: APXT 1003 Compatible insert manufacturer: Korloy Torx screw: M2.5x5.5 Torx key: T8 Brand: Teknik Makina FAQ Which inserts are compatible with this shank cutter? The shank cutter is compatible with APXT 1003 indexable inserts; the tool is supplied to accept these insert sizes and geometries. How is the insert secured in the cutter? Inserts are fixed with a Torx M2.5x5.5 screw; use a T8 key for clamping and release to ensure a secure, repeatable fit. What are the key dimensions to check before installation? Confirm the 16 mm shank diameter, 150 mm overall length and 50 mm cutting length to ensure holder clearance and machine suitability. Can this tool be used with Korloy inserts? Yes, the cutter is specified for APXT 1003 inserts and is compatible with inserts from Korloy as indicated in the product data. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm End Mill for BLMP 0603 Indexable Inserts 150mm Overall Length, 2 Flutes - Teknik Makina
Reliable machining performance with the compact 16 mm diameter and a 40 mm cutting length, offering stable clamping and easy insert changes for continuous production. Order directly via Metav Werkzeuge or ask our consultants for application-specific advice. Schaftfräser – insert milling cutter for BLMP 0603 indexable inserts, 16 mm The Schaftfräser is an insert milling cutter designed for secure shank clamping and efficient material removal with BLMP 0603 indexable inserts in industrial milling applications. 16 mm diameter, 40 mm cutting length Compatible with BLMP 0603 indexable inserts 15 mm precision shank for stable clamping Torx T8, screw M3x6.2 for quick insert changes Increased productivity through insert-based cutting The insert-based design combines the economy of replaceable cutters with the performance expected in production environments. Fitted for BLMP 0603 indexable inserts, the tool enables fast index changes and minimal downtime, supporting a steady material removal rate. The geometry with two cutting edges provides a predictable cutting force and lower spindle load, which helps maintain consistent cycle times and reduces unexpected stoppages. Secure clamping and runout stability for accurate results A 15 mm precision shank and a total length of 150 mm ensure reliable seating in standard tool holders while limiting runout and vibration. This mechanical stability translates into repeatable part quality and longer insert life, as forces are transferred efficiently through the holder rather than the insert seat. The balanced design and modest overall mass also support smoother spindle operation and reduced tool wear. Simple maintenance and fast insert replacement Maintenance is straightforward thanks to standardised fastenings: a Torx T8 keyway and M3x6.2 screw permit quick, toolroom-friendly insert changes and secure clamping. The clear interface between the cutter body and the indexable inserts simplifies service routines and lowers mean time to repair, making the tool suitable for busy shops that require predictable upkeep and easy inventory handling. Suitable for versatile milling tasks with trusted components Designed for use with Taegutec-compatible BLMP 0603 inserts, the cutter is appropriate wherever indexable insert milling is the preferred strategy for combined roughing and profile finishing. The compact 16 mm diameter and 40 mm cutting length offer a balance between reach and stiffness, making the tool a solid choice for medium-duty slotting and peripheral milling tasks in organised production settings. Contact Metav Werkzeuge for tailored technical guidance and reliable supply from Emmerich — quote S479-2TM (Teknik Makina) when enquiring Technical Data SKU: S479-2TM Manufacturer: Teknik Makina Diameter: 16 mm Total length: 150 mm Shank diameter: 15 mm Cutting length: 40 mm Weight: 0.231 kg Number of cutting edges: 2 Compatible with BLMP 0603 indexable inserts (Taegutec) Torx key: T8 Torx screw: M3x6.2 Product type: Insert milling cutter (shank milling cutter, Schaftfräser) FAQ What inserts fit this milling cutter? The milling cutter accepts BLMP 0603 indexable inserts; it is specified for Taegutec-compatible grades and geometries. Which holder size is required for stable clamping? A tool holder that accepts a 15 mm shank is required to ensure proper seating and runout control for this insert milling cutter (SKU S479-2TM). How many cutting edges does the cutter have? The cutter is configured with 2 cutting edges, offering a balance of cutting efficiency and chip evacuation. Is a special screw or key needed for insert changes? Insert retention uses a Torx T8 interface with an M3x6.2 screw for rapid and secure replacement. Can this tool be used for finishing as well as roughing? With the appropriate BLMP 0603 insert geometry and grade, the cutter is suitable for both profile finishing and medium roughing operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm End Mill For LNMT 0804 Indexable Inserts, 2 Flutes 40mm Cutting Length, 150mm Overall - Teknik Makina
Take advantage of the reliable combination of compact dimensions, repeatable setup and easy insert changes for consistent milling results; place orders or request advice through Metav Werkzeuge for seamless procurement and fast delivery. Shank milling cutter S301TM — for LNMT 0804 indexable inserts, Ø 16 mm, 2 cutting edges (Teknik Makina) The Shank milling cutter S301TM is a compact, insert-based milling tool engineered for light to medium milling tasks where a secure 16 mm shank and quick insert replacement are required Shank Ø 16 mm Designed for LNMT 0804 inserts Two cutting edges Torx screw M2.5×7, key T8 Stability and predictable cutting performance The compact Ø 16 mm shank delivers a stable clamping interface that reduces vibration and improves surface finish compared with undersized holders. With two cutting edges the tool provides a balanced cut and consistent chip flow, which helps to maintain geometric tolerance during interrupted cuts. The modest weight of 0.256 kg contributes to easier handling and quicker tool changes at the machine, benefiting cycle-time-sensitive production. Fast insert changes and low-maintenance setup Indexable LNMT 0804 inserts are secured with a Torx screw (M2.5×7) using a T8 key, enabling swift replacement without specialised fixtures. This simplifies maintenance routines and reduces machine downtime: once the worn insert is removed, a fresh insert restores cutting performance without the need to replace the entire tool body. The result is predictable tool life management and lower consumable costs per cutting edge. Dimensions that simplify workshop logistics Key dimensions such as a 150 mm overall length, a 40 mm cutting length and a 16 mm shank diameter allow straightforward integration into existing tool lists and collet systems. These standardised measurements support rapid tool changes and repeatable set-ups, reducing fixture adjustments and enabling faster production ramps when switching jobs or workpieces. Suitable applications and compatibility The shank milling cutter is configured specifically for LNMT 0804 indexable inserts and is compatible with ISCAR-specified plates, offering a practical solution for indexable milling operations where replaceable cutting edges are preferred over solid-carbide tools. The two-edge configuration is appropriate for roughing and light finishing passes where reliable chip evacuation and simple indexation are priorities. Contact Metav Werkzeuge for procurement advice and to arrange supply of the Teknik Makina shank milling cutter S301TM for LNMT 0804 indexable inserts — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: S301TM Manufacturer: Teknik Makina Designation: Shank milling cutter for LNMT 0804 indexable inserts Core data Shank diameter: 16 mm Cutting length: 40 mm Overall length: 150 mm Weight: 0.256 kg Cutting edges: 2 Connection diameter: 16 mm Special features For LNMT 0804 indexable inserts Compatible with ISCAR inserts Torx screw M2.5×7 Torx key T8 FAQ What inserts are compatible with the S301TM? The S301TM is designed for LNMT 0804 indexable inserts; compatibility with ISCAR-specified inserts is indicated in the product data. How is the insert secured in the cutter? Inserts are fastened with a Torx screw M2.5×7; a T8 key is the required tool for tightening and replacement. What are the main dimensions to check for machine compatibility? Key dimensions are a 16 mm shank diameter, 150 mm overall length and 40 mm cutting length, which should be checked against the machine holder and collet system. Is the S301TM suitable for finishing passes? With two cutting edges the tool can be used for light finishing where stability and chip control are sufficient; for high-precision finish passes alternative tools or cutting parameters may be recommended. How heavy is the tool for handling and storage planning? The tool weight is 0.256 kg, making it easy to handle during tool changes and storage. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm End Mill for LNMU 0202 Indexable Inserts Internal Coolant, 100mm Overall Length - Teknik Makina
Choose the combination of internal coolant, a 16 mm shank and compatibility with LNMU 0202 indexable inserts for stable, high‑productivity milling and reduced tool wear. Order directly via Metav Werkzeuge or contact our consultants for tailored advice. Shank Milling Cutter S708TM – 16 mm shank, internal coolant (Teknik Makina) The Shank Milling Cutter S708TM is a purpose‑built milling body for LNMU 0202 indexable inserts, offering a compact solution for face and shoulder milling on CNC machines in industrial workshops. 16 mm shank diameter Internal coolant feed Compatible with LNMU 0202 inserts Three‑flute design for smooth cutting Stable coolant supply for consistent tool life The milling body is engineered with an integrated internal coolant channel that directs cutting fluid precisely to the insert interface. This targeted cooling reduces thermal load and improves chip evacuation, which in turn extends insert life and stabilises cutting forces during long runs. Compatible with modern coolant strategies, the design supports higher cutting parameters without sacrificing surface quality, making it suitable for series production as well as demanding single‑part machining. Rigidity and geometry for accurate material removal A 16 mm shank combined with a three‑flute geometry provides a balanced compromise between rigidity and chip clearance. The construction minimises deflection under load, which yields repeatable dimensions and improved surface finish when roughing or finishing. With an overall length 100 mm and cutting length 30 mm, the tool offers the reach required for shoulder operations while keeping the overhang low — a practical layout for optimised spindle stability and reduced vibration. Practical maintenance and compatible insert system Maintenance and insert changes are straightforward thanks to the Torx fastening system and standard screw dimensions. The tool uses a Torx key T6 and a retention screw M1.8x4.1, enabling quick and precise clamp replacement with common workshop tools. Designed for LNMU 0202 indexable inserts and compatible with Tungaloy cutting grades, the holder simplifies inventory management and allows shops to select insert grades that match specific materials and cutting conditions. The lightweight yet robust design (approx. 0.212 kg) supports efficient tool handling and fast cycle preparation. For technical advice or to secure the Teknik Cutting Tools S708TM shank milling cutter with internal coolant, contact Metav Werkzeuge GmbH in Emmerich for expert guidance and reliable supply. Technical data Article number: S708TM SKU: S708TM Eclass: 21180806 Description: Shank milling cutter for LNMU 0202 indexable inserts Numbers Diameter: 16 mm Shank diameter: 16 mm Overall length: 100 mm Cutting length: 30 mm Weight: 0.212 kg Flutes: 3 Torx key: T6 Special features For LNMU 0202 indexable inserts Compatible with Tungaloy inserts Internal coolant Torx screw M1.8x4.1 Manufacturer: Teknik Makina FAQ Which inserts fit this milling body? The S708TM accepts LNMU 0202 indexable inserts; compatible insert grades from Tungaloy are recommended depending on material and cutting strategy. Is the tool suitable for through‑coolant setups? Yes, the holder features internal coolant to direct fluid to the cutting edge and support higher cutting parameters. What is the maximum reach of the tool? The overall length is 100 mm with a cutting length of 30 mm, providing reach for shoulder milling while maintaining rigidity. How many flutes does the cutter have and why it matters? The tool has three flutes, offering a balance between chip evacuation and cutting edge engagement for improved surface finish. Which fastening components are required for insert changes? Insert retention uses a Torx T6 key and a M1.8x4.1 screw for secure and repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm End Mill For LNMU 0303 Indexable Inserts, 2 Flutes 150mm Shank - Teknik Makina
Take advantage of high clamping stability and straightforward insert changes for uninterrupted production. The combination of a 16 mm shank and precise clamping with an M2.5x7 torx screw ensures repeatable set-up and low downtime — order the cutter via Metav Werkzeuge or contact our technical team for specification advice. Schaftfräser — shank milling cutter for LNMU 0303 indexable inserts, 16 mm shank (Teknik Makina) The Schaftfräser is a robust shank milling cutter designed for heavy-duty and precision milling operations, compatible with LNMU 0303 indexable inserts and intended for machining tasks that demand stable clamping and fast insert replacement Compatible with LNMU 0303 indexable inserts 16 mm shank diameter for secure clamping Two cutting edges for steady material removal Torx M2.5 clamping screw, T8 key specification Stability and machining performance for production work A solid toolholder with a 16 mm shank and 150 mm overall length offers improved rigidity compared with smaller holders, reducing vibration and runout during milling. The design with two cutting edges balances material removal and surface finish, making the cutter body suitable for both intermittent and continuous cuts. This stability translates into longer tool life for the inserts and more predictable cycle times on CNC milling centres. Fast insert changes and secure clamping reduce downtime The cutter is configured for LNMU 0303 indexable inserts, allowing straightforward replacement without complex realignment. The clamping uses an M2.5x7 torx screw, tightened with a T8 key, which simplifies maintenance procedures and keeps exchange times short. Clear torque practice and the compact screw size minimise the risk of incorrect clamping, so set-up can be completed reliably and repeatedly in production environments. Practical use in workshop environments As an indexable-insert milling body, the tool supports quick adaptability across jobs where insert geometry or grade may vary. The combination of a rigid shank and an insert-mounted cutting edge means less fixture rework and simpler inventory management: only the inserts need frequent replacement rather than whole cutters. For general workshop and jobbing contexts, this approach reduces capital tied up in tooling while keeping performance consistent. Quality and traceability for industrial procurement Supplied under Teknik Makina's designation and listed as SKU S671TM, the cutter body matches standard toolroom expectations for component identification and traceability. The clear specification of the insert type and clamping components supports integration into tool lists and maintenance schedules. Buying via an industrial partner like Metav ensures access to technical data, consistent stock handling and a centralised supply chain for rapid replenishment. Discuss the S671TM shank milling cutter with Metav Werkzeuge to confirm fitment and secure tooling that improves machining stability — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice Technical data SKU: S671TM Manufacturer: Teknik Makina Product designation: Schaftfräser for LNMU 0303 Indexable Inserts ECLASS: 21180806 ETIM: EC011860 Dimensions & core data Shank diameter: 16 mm Diameter: 16 mm Overall length: 150 mm Number of cutting edges: 2 Torx screw: M2.5x7 Torx key size: T8 Features Compatible insert type: LNMU 0303 Compatible insert manufacturer: TNGLY-OKE Brand: Teknik Makina SKU identifier: S671TM FAQ Which insert type fits this cutter? The cutter accepts LNMU 0303 indexable inserts; the tool body is specified for that insert form to ensure correct seating and cutting geometry. What clamping hardware is specified for insert retention? Insert retention uses an M2.5x7 torx clamping screw tightened with a T8 key as listed for the S671TM cutter body. Is the shank suitable for conventional collet chucks? The 16 mm shank is compatible with standard 16 mm collet or holder systems commonly used in milling centres; verify holder type for runout tolerances. Can the cutter be balanced for high-speed applications? Balancing depends on the assembled insert and holder; the S671TM body is designed for stable clamping, but final balancing should be performed according to machine and speed requirements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm End Mill for LNMX 0402 Indexable Inserts L150mm Internal Coolant - Teknik Makina
Take advantage of a compact, robust milling solution that combines a 16 mm shank, internal coolant and compatibility with standard LNMX 0402 indexable inserts for predictable tool life and reduced downtime; order through Metav Werkzeuge or consult our specialists for tailored recommendations. 16 mm Shank Milling Cutter for LNMX 0402 Indexable Inserts — Internal Coolant (Teknik Makina) the 16 mm shank milling cutter for LNMX 0402 indexable inserts offers a compact tool body designed for secure insert clamping and consistent chip evacuation in medium-reach milling tasks Internal coolant for improved chip evacuation 16 mm shank for rigid clamping Compatible with Korloy LNMX 0402 inserts Four cutting edges for steady material removal High-stability machining for consistent productivity The milling body is engineered to deliver stable cutting performance: the combination of a 16 mm shank and four cutting edges reduces deflection and promotes even wear, which in turn lowers rework rates. The integrated internal coolant routes fluid directly to the cutting zone, improving chip control and temperature management so that the benefit is measurable in longer insert life and more predictable cycle times. This stability supports repeatable results on batch work without sacrificing setup simplicity. Fast insert changes and standardised clamping Maintenance and indexable-insert replacement are designed to be straightforward. The tool accepts LNMX 0402 indexable inserts and is specified for Korloy inserts in its seat geometry, while the fixing hardware is a T6 Torx screw sized M1.8x4.1 for secure, repeatable clamping. This standardisation reduces inventory complexity and enables quick swaps during scheduled stops, delivering a clear operational advantage in production environments that rely on short maintenance windows. Compact reach with balanced rigidity With a 150 mm overall length and an effective 80 mm cutting length, the tool body balances reach and stiffness for medium-reach milling tasks where machine accessibility and tool rigidity must be reconciled. The compact mass of 0.2 kg helps to limit centrifugal imbalance at higher spindle speeds, while the 16 mm shank diameter permits the use of common holders for straightforward integration into existing tool sets. The result is a versatile cutter that fits many workshop layouts without extensive holder changes. Low-maintenance design for dependable uptime Routine handling is simplified by a clear fastening system and accessible coolant channel; the design minimises the time needed for exchange and inspection. The S090TM milling cutter is produced with repeatable tolerances so that seat wear is predictable and insert life can be planned. Fewer unexpected interventions translate into steadier production and a reduced administrative burden when scheduling inserts and spare parts. For precise, insert-based milling with internal coolant, contact Metav Werkzeuge for ordering and application support for Teknik Makina tools — Metav Werkzeuge ships from Emmerich and can advise on holders and insert selection; eMail info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance Technical data Article number: S090TM EClass: 21180806 Manufacturer: Teknik Makina Product type: Milling cutter (shank cutter) Facts Diameter: 16 mm Overall length: 150 mm Cutting length (shank/cutting): 80 mm Weight: 0.2 kg Number of cutting edges: 4 Torx key: T6 Torx screw: M1.8x4.1 Special features Internal coolant For LNMX 0402 indexable inserts Compatible insert manufacturer: Korloy SKU: S090TM Label: 16mm shank milling cutter LNMX 0402 L150mm with internal coolant FAQ Which indexable inserts fit this cutter? The cutter is designed for LNMX 0402 indexable inserts; Korloy inserts with matching seat geometry are compatible and recommended for correct fit and performance. How is coolant delivered to the cutting zone? Coolant is supplied via the tool body’s internal coolant channel, allowing direct flow to the insert pocket for improved chip evacuation and temperature control. How are inserts secured on the tool? Inserts are fastened with a T6 Torx screw (M1.8x4.1); the S090TM uses this standard fixing for repeatable clamp force and quick replacement. What machine and holder considerations apply for the 16 mm shank? A rigid holder suited to a 16 mm shank is advised to minimise runout; the tool’s 150 mm overall length and 80 mm cutting length should be matched to the machine’s spindle projection and workpiece setup. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm End Mill for LNMX 0603 Indexable Inserts Internal Coolant, 150mm L - Teknik Makina
Take advantage of a compact tool that combines 16 mm rigidity, precise indexable-insert compatibility and through‑coolant performance for consistent milling results; the design reduces vibration and simplifies insert changes. Order the shank milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shank milling cutter for LNMX 0603 indexable inserts — 16 mm shank, internal coolant (Teknik Makina) Shank milling cutter for LNMX 0603 indexable inserts designed for secure clamping and coolant-fed chip control in CNC milling applications 16 mm shank diameter and fitment Internal coolant supply to the cutting zone Compatible with LNMX 0603 indexable inserts Two cutting edges for stable cutting performance Rigidity and repeatability that keep cycles on schedule A compact tool body with a 16 mm shank and 150 mm overall length provides a balance between accessibility and stiffness. The relatively short head length of 50 mm cutting length and the presence of two cutting edges reduce chatter and produce a predictable chip pattern, which in turn supports consistent dimensioning and surface finish. For production environments this means fewer rejects and less rework, while setup times remain short thanks to the standard shank diameter that suits common collets and holders. Coolant-through design improves tool life and surface quality The internal coolant channel feeds lubricating fluid directly to the insert seat, aiding chip evacuation and heat control at the cutting zone. Direct coolant supply lowers cutting temperatures, which prolongs insert life and stabilises machining forces during prolonged cycles. Reduced thermal load also helps achieve a finer surface finish on workpieces and lowers the risk of built-up edge on the insert, an advantage for mixed-batch work where both consistency and uptime matter. Indexable insert compatibility for fast servicing Built to accept LNMX 0603 inserts and compatible with inserts from Korloy, the cutter uses a standard M3x7 clamping screw secured with a T8 Torx key for rapid changing. The use of a familiar insert format keeps tooling costs predictable and enables quick on-the-bench swaps without specialised fixtures. This modular approach separates the cutting edge from the body, allowing the component to be maintained or replaced independently, which supports lean inventories and faster tool turnaround. Integration into CNC workflows and workshop routines Weighing 0.19 kg and finished for straightforward mounting, the tool integrates into automated tool magazines and manual setups alike. Its geometry is aimed at general milling tasks where indexable inserts deliver economical performance: stable material removal, straightforward maintenance and compatibility with a wide range of common CNC toolholders. The overall package supports operational continuity and is suitable for machine shops prioritising repeatable results with low per-cutting-edge cost. For tailored technical advice on the Teknik Makina shank milling cutter and to confirm suitability for specific machining tasks, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com to request ordering support or application guidance. Technical Data Article number: S284-3TM Brand: Teknik Makina Product type: Shank milling cutter ECLASS: 21180806 Facts Diameter: 16 mm Overall length: 150 mm Cutting length (head): 50 mm Weight: 0.19 kg Cutting edges: 2 Special features Internal coolant supply Compatible with LNMX 0603 indexable inserts Compatible insert manufacturer: Korloy Clamping screw: M3x7 Torx key: T8 FAQ What insert type does this cutter accept? This cutter accepts LNMX 0603 indexable inserts; the geometry and pocket are designed for that insert format and compatible Korloy types. How is coolant delivered to the cutting zone? Coolant is supplied through the tool body via the internal channel, improving chip evacuation and temperature control at the insert seat. Which fastening hardware is required for insert changes? Insert clamping uses an M3x7 screw tightened with a T8 Torx key for secure and quick changes. Is the shank suitable for standard holders and collets? The 16 mm shank diameter matches common collets and holders, facilitating integration into existing tool setups. Can this tool be used for automated tool magazines? Yes, the compact dimensions and standard shank make it compatible with automated tool magazines and typical CNC toolholders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm End Mill For LNMX 0603 Indexable Inserts, M3x7 Clamp Screw T8 - Teknik Makina
Combine reliable compatibility with LNMX 0603 indexable inserts and a 16 mm shank for consistent performance in demanding milling tasks; benefit from secure Torx clamping and two effective cutting edges. Order the cutter directly via Metav Werkzeuge or consult our specialists for application support. Indexable End Mill S284TM for LNMX 0603 inserts — 16 mm shank, Teknik Makina The Indexable End Mill S284TM is an indexable insert cutter engineered for robust face and shoulder milling with LNMX 0603 inserts in industrial machining applications. *Compatible with LNMX 0603 indexable inserts *16 mm shank for standard toolholders *Two cutting edges for efficient material removal *M3x7 Torx screw; T8 key for secure clamping Consistent cutting performance and proven compatibility The cutter is built around the proven concept of an indexable insert system, allowing cost-effective edge changes while maintaining high process stability. With a 16 mm shank and an overall length of 110 mm, the tool provides a balanced combination of rigidity and reach for typical milling set-ups. The use of LNMX 0603 inserts supplied by Korloy ensures wide availability of grades and edge geometries, which translates into predictable tool life and controlled cutting forces. This configuration reduces machine downtime because inserts are rotated or replaced quickly, while the solid shank diameter supports repeatable concentricity in standard holders. Secure clamping and straightforward maintenance Retention is handled by a M3x7 Torx screw secured with a T8 key, a straightforward system that keeps the insert firmly seated under cutting loads. The simple screw clamping eliminates complex set-up routines and lowers the risk of improper seating, which supports consistent part quality. Because insert handling and screw torque are standardised, maintenance routines are faster and less error-prone, helping to keep production throughput steady when frequent insert changes are required in batch production or multi-shift operations. Designed for demanding machining with clear process benefits Featuring two cutting edges, this indexable end mill is configured for stable chip formation and efficient material removal on shoulders and faces. The limited number of active edges reduces cutting force peaks and simplifies chip management, especially in interrupted cuts or when machining tougher materials. The tool’s geometry and insert compatibility make it suitable for a range of tasks where a compromise between aggressiveness and surface finish is required, offering measurable gains in cycle time without sacrificing repeatability. Integration into the workshop and supply reliability As a component from Teknik Makina, the cutter fits into established tooling systems and procurement workflows. The S284TM is compatible with common toolholders that accept a 16 mm shank, simplifying inventory and reducing the need for specialised arbors. Sourcing through a trusted distributor provides quick access to replacement inserts and spare screws, ensuring that the machining cell remains productive. For buyers seeking dependable supply and technical guidance, this tool is positioned to minimise supplier-related risks while supporting sustained production. For tailored application advice or to secure supply of Teknik Makina indexable tooling, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 — specialists are available to discuss tooling integration and insert grades for specific materials. Technical Data Article number: S284TM Manufacturer: Teknik Makina SKU: S284TM ECLASS: 21180806 ETIM: EC011860 Facts Diameter: 16 mm Shank diameter (nominal): 16 mm Overall length: 110 mm Cutting edges: 2 Retention screw: M3x7 Torx key size: T8 Special features Compatible inserts: LNMX 0603 Compatible insert manufacturer: Korloy Product type: Indexable end mill / shank cutter Intended use: Demanding machining operations Title (shop): Schaftfräser for Korloy LNMX 0603 indexable inserts FAQ Which insert type fits this cutter? The cutter accepts LNMX 0603 indexable inserts; insert compatibility and edge options are specified for the S284TM indexable end mill by Teknik Makina. What shank size is required for the toolholder? A 16 mm shank holder is required; the S284TM is manufactured to match standard 16 mm toolholder interfaces. How many cutting edges does the tool have and what is the advantage? The tool features two cutting edges, which favour stable cutting and simplified chip control for shoulder and face milling tasks. Which screw and key are used for insert clamping? Insert clamping is via a M3x7 Torx screw tightened with a T8 key to ensure secure retention under load. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm End Mill For LNMX Indexable Inserts 90° Single Cut, T8 Torx Screw - Teknik Makina
Take advantage of the 16 mm shank, 90° cutting angle and compatibility with LNMX 1006 inserts for reliable square-shoulder milling; order the shank cutter LN096TM directly via Metav Werkzeuge or ask our consultants if needed. Shank cutter LN096TM — 16 mm shank, for LNMX indexable inserts by Teknik Makina Shank cutter LN096TM for accurate indexable-insert milling in workshop and production environments, designed for use with LNMX 1006 inserts. 16 mm shank diameter Compatible with LNMX 1006 inserts 90° cutting angle for square shoulders Torx T8 screw M3x7 retention High compatibility and secure insert retention for efficient tool changes The LN096TM is built as a robust shank cutter for indexable milling, accepting LNMX 1006 inserts (Korloy compatibility). The indexable-insert system separates cutting geometry from the tool body, enabling fast exchange of cutting edges without regrinding. A standard Torx T8 key engages the M3x7 clamping screw to secure the insert firmly, which reduces setup time and keeps the toolholder centred. The result is predictable repeatability and reduced downtime during insert replacement. Rigid, compact design for stable square-shoulder milling A 16 mm shank and compact overall length of 90 mm deliver stiffness that minimises vibration and runout during shoulder and face operations. The 90° cutting angle is optimised for producing perpendicular surfaces and precise step transitions, making the tool suitable where tight geometry control is required. The light mass (approximately 0.14 kg) supports quick acceleration on CNC spindles and helps to maintain surface finish without increasing tool overhang. Practical workshop integration and maintenance advantages This shank cutter supports straightforward workshop workflows: inserts are indexed rather than reground, clamping is achieved with widely available Torx tooling, and the single-cutting-edge arrangement simplifies cutting-force direction. The compact profile eases storage and holder compatibility across standard toolholders. For traceability in production, the SKU LN096TM identifies the tool precisely for reordering and toolroom records. For reliable square-shoulder milling from Teknik Makina and tailored advice on toolholder compatibility, contact Metav Werkzeuge — Metav’s consultants will recommend the right configuration and delivery options for your workshop. Technical data Article number: LN096TM Manufacturer: Teknik Makina Product: Shank cutter for indexable inserts Compatible inserts: LNMX 1006 Compatible insert manufacturer: Korloy Clamping screw: M3x7 Torx key: T8 ECLASS: 21180806 ETIM: EC011860 Core numerical data Shank diameter: 16 mm Cutting diameter: 16 mm Overall length: 90 mm Cutting angle: 90° Number of cutting edges: 1 Weight: 0.14 kg Designs and special features Indexable-insert system Torx T8 retention screw Single-cutting-edge configuration Compact shank for reduced overhang FAQ What inserts fit this shank cutter? The shank cutter accepts LNMX 1006 indexable inserts; compatibility is specified for Korloy LNMX 1006 types. Which key is required to change the insert? Insert retention is secured by an M3x7 screw tightened with a Torx T8 key for reliable clamping. Is the cutter suitable for shoulder milling? Yes, the 90° cutting angle and rigid 16 mm shank are designed to produce square shoulders with high geometric control. How is the tool identified for reorders? Use the SKU LN096TM and the Teknik Makina designation when reordering to ensure the same configuration and compatible inserts. Can the clamping screw be replaced with a different style? The tool uses a standard M3x7 Torx clamping screw; replacement with equivalent specification screws is possible to maintain correct clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm End Mill For R390 11T3 Indexable Inserts With Internal Coolant, 120mm L - Teknik Makina
Take advantage of the precision of a compact 16 mm shank combined with internal coolant and proven compatibility with R390 11T3 indexable inserts for reliable milling cycles; order directly via Metav Werkzeuge or request tailored application advice from our specialists. Indexable Insert Shank Cutter S591-1TM — 16 mm shank, internal coolant (Teknik Makina) S591-1TM is a shank cutter body designed for indexable milling with R390 11T3 inserts, offering a compact footprint and internal coolant for controlled chip evacuation in industrial machining tasks 16 mm shank diameter for compact setups Internal coolant for improved chip evacuation Compatible with R390 11T3 Sandvik inserts 120 mm overall length, 40 mm cutting length Higher throughput through coolant-assisted chip control The combination of an integrated internal coolant channel and a two‑edge design promotes consistent chip evacuation, reducing heat at the cutting zone and enabling more stable feeds. This results in measurable improvements in cycle reliability and reduced frequency of unplanned tool changes. The internal cooling path directs coolant close to the cutting interface, which helps to preserve the insert edge and extend tool life under medium to heavy chip loads without compromising surface finish. Fast insert changes and secure clamping for production environments Designed specifically for R390 11T3 indexable inserts and compatible with common Sandvik cutter systems, the shank cutter uses a standard clamping screw M2.5×5.5 tightened with a T8 Torx key for repeatable, secure seating of the insert. The straightforward clamping concept shortens downtime during insert replacement and supports quick changeovers on the shop floor, making this cutter suitable for batch production where minimised non‑productive time is essential. Compact dimensions and balanced geometry for machine efficiency With a 16 mm shank, 120 mm overall length and a 40 mm cutting length, the tool body provides a compact solution for tighter tool magazines and reduced overhang, improving rigidity and vibration resistance. The two‑flute layout gives a balance between material removal rate and surface integrity, while the modest mass contributes to lower spindle load during high‑speed indexing. The S591‑1TM design focuses on operational stability and predictable performance in demanding milling tasks. For ordering, technical matching or application guidance on Teknik Makina indexable milling bodies such as the S591-1TM, contact Metav Werkzeuge in Emmerich for expert recommendations and reliable supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S591-1TM Manufacturer: Teknik Makina Product: Indexable insert shank cutter for R390 11T3 Facts Shank diameter: 16 mm Overall length: 120 mm Cutting length: 40 mm Number of cutting edges: 2 Weight: 0.181 kg Special features Internal coolant Compatible with R390 11T3 indexable inserts Clamping screw: M2.5×5.5 Torx key: T8 FAQ Which inserts fit this shank cutter? The cutter accepts R390 11T3 indexable inserts; it is manufactured for compatibility with Sandvik-style insert geometries as specified for the S591-1TM shank cutter. Is internal coolant required for reliable operation? Internal coolant improves performance and consistency; the S591-1TM is supplied with an internal coolant channel to support controlled coolant delivery to the cutting edge. What tooling is needed for insert changes? Insert clamping uses a M2.5×5.5 screw tightened with a T8 Torx key, allowing repeatable seating and straightforward exchange of inserts on the S591-1TM. Can the cutter be used in compact toolholders? Yes, the 16 mm shank and 120 mm overall length are suited to compact toolholders and reduced overhang applications where stiffness and rigidity are priorities. How does the two‑edge design affect machining? The two‑flute geometry provides a compromise between chip evacuation and cutting stability, supporting efficient material removal while maintaining surface quality with indexable inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Schaftfräser für LOEX 0804 Wendeplatten L150mm 2 Schneiden Torx T8 M2,5x7 - Teknik Makina
Schaftfräser für LOEX 0804 Wendeplatten von Teknik Makina Der Schaftfräser bietet präzise Wechselplattenaufnahme für LOEX 0804 Wendeplatten und ist ausgelegt für stabile Bearbeitung auf Fräszentren und universellen Werkzeugmaschinen. 16 mm Schaftdurchmesser für hohe Rundlaufstabilität Kompatibel mit LOEX 0804 Wendeplatten von SECO 150 mm Gesamtlänge für flexible Einspannungstiefen 40 mm Schneidenlänge für effiziente Spanabnahme Robustheit und Schnittleistung für produktive Zerspanung Der Fräskörper ist auf zuverlässige Standzeit und konstante Schnittbilder ausgelegt. Mit Schaftdurchmesser 16 mm und 2 Schneiden sorgt das Werkzeug für geringe Vibration und gleichmäßigen Spanabfluss. Die Gesamtlänge 150 mm ermöglicht variable Einspannungen, während die Schaftlänge Schneide 40 mm gezielte Zustellungen erlaubt. Daraus resultieren höhere Vorschübe bei stabiler Oberflächenqualität und reduzierte Rüstzeiten. Einfache Wechseltechnik und Kompatibilität mit SECO Wendeplatten Die Aufnahme ist speziell für LOEX 0804 Indexplatten konzipiert und passt zu Wendeplatten des Herstellers SECO, was schnellen Ersatz und breite Verfügbarkeit sicherstellt. Der Wechsel erfolgt über die mitgelieferte Schraube; empfohlenes Werkzeug: Torx Schlüssel T8 und Schraube M2,5x7. Für Anwender ohne tiefere Plattenkenntnis: LOEX 0804 bezeichnet die Form und Größe der Indexplatte und gewährleistet durch standardisierte Geometrie reproduzierbare Schnittwerte. Praktischer Einsatz und Bedienkomfort im Alltag Im Maschinenalltag erleichtert die Auslegung mit zwei Schneiden das effiziente Abtragen von Material bei geringem Kraftbedarf. Die kompakte Bauform reduziert Aufspannlängen und erhöht die Steifigkeit, was besonders bei Serienbetrieb zu gleichbleibenden Ergebnissen führt. Austausch und Montage der Platten sind mit dem Torx Schlüssel T8 werkstattgerecht gelöst, was den Wartungsaufwand verringert und Stillstandszeiten minimiert. Bei spezifischen Bearbeitungsfragen steht die technische Beratung von Metav gerne zur Verfügung. Empfohlen wird der Einsatz des Schaftfräsers von Teknik Makina mit LOEX 0804 Wendeplatten für Anwender, die eine wirtschaftliche, kompatible und einfach wartbare Lösung suchen – bei Bedarf technische Details per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 anfragen Produkteigenschaften Artikelnummer: S294TM Bezeichnung: Schaftfräser für LOEX 0804 Wendeplatten Marke: Teknik Makina Produktart: Schaftfräser SKU: S294TM Daten Schaftdurchmesser: 16 mm Gesamtlänge: 150 mm Schaftlänge Schneide: 40 mm Schneiden: 2 Gewicht: 0,224 kg Besonderheiten Passend für Wendeplatten: LOEX 0804 Passend für Wendeplatten Hersteller: SECO Torx Schlüssel: T8 Torx Schraube: M2,5x7 FAQ Wie sicher ist die Kompatibilität mit SECO LOEX 0804 Wendeplatten? Der Schaftfräser von Teknik Makina (S294TM) ist speziell für LOEX 0804 Platten ausgelegt und bietet volle Kompatibilität zu SECO‑gefertigten Platten, sodass Standardplatten direkt eingesetzt werden können. Welche Einspanntiefe ermöglicht das Werkzeug praktisch? Die Gesamtlänge 150 mm kombiniert mit einer Schaftlänge Schneide 40 mm erlaubt variable Einspannungen und gezielte Schnitttiefen für unterschiedliche Bearbeitungsaufgaben. Wie erfolgt der Plattenwechsel und welches Werkzeug wird benötigt? Die Wendeplatten werden über eine Schraubverbindung fixiert; empfohlenes Werkzeug zum Lösen und Anziehen ist der Torx Schlüssel T8 für die Torx Schraube M2,5x7. Hersteller: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com / Verantwortlich: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Shank Cutter For ADMX 0702 Indexable Inserts, 90° Cutting Angle, 3 Flutes, 18mm Cutting Length - Teknik Makina
Benefit from a robust combination of insert compatibility and rigid toolholding: the S759TM delivers compatibility with ADMX 0702 indexable inserts, a 16 mm shank and three cutting edges for stable, repeatable milling — order directly via Metav Werkzeuge or consult their specialists for tailored technical guidance. Shaft milling cutter S759TM by Teknik Makina — 16 mm shank, for ADMX 0702 indexable inserts The Shaft milling cutter S759TM is an insert-style milling tool designed for operations that specify ADMX 0702 indexable inserts; it combines a compact 16 mm shank with a 90° cutting geometry for accurate shoulder and face milling. 16 mm shank for secure toolholding Compatible with ADMX 0702 indexable inserts Three cutting edges for smooth material removal Total length 160 mm, weight 0.205 kg Consistent chip control and repeatable cutting performance The insert milling cutter is built for predictable, efficient material removal. With a 16 mm shank and three cutting edges, the design reduces chatter and improves surface quality during peripheral and face milling. The 18 mm cutting length offers a practical balance between reach and rigidity, while the 90° cutting angle provides square shoulders and clear reference faces. Fast, positive clamping of the inserts is achieved with the Torx M2x4.2 screw and T6 key, allowing quick replacement of indexable inserts and consistent position repeatability — a crucial factor when multiple identical components are required on a production run. Fewer stoppages and straightforward maintenance Maintenance is simplified by the insert system and standardised fastenings. Being compatible with ADMX 0702 inserts from Pramet ensures access to a broad range of grades and geometries without altering the holder, which reduces inventory complexity and downtime. The relatively low mass of 0.205 kg and the 160 mm total length support stable spindle dynamics in many common setups. This combination minimises setup time and helps maintain throughput in busy workshops while offering a serviceable solution that aligns with established tooling systems. Clear selection criteria for workshop planners When specifying an insert holder, the primary considerations are insert type, shank diameter and cutting geometry. This milling head accepts ADMX 0702 inserts and features a 16 mm shank for secure clamping in standard toolholders. The presence of three cutting edges means each insert can be indexed several times before replacement, which is economical where repeatability is required. For tasks that require well-defined shoulders or face finishes, the 90° cutting angle offers a reliable geometric result. For further clarification on suitability in specific machining scenarios, Metav Werkzeuge’s product documentation and consultants can advise on insert grades and machine parameters. Choose the Teknik Cutting Tools S759TM for dependable insert milling performance and contact Metav Werkzeuge in Emmerich for personalised advice and prompt supply options Technical data Article number: S759TM Manufacturer: Teknik Makina Designation: Shaft milling cutter for ADMX 0702 indexable inserts Weight: 0.205 kg Facts Shank diameter: 16 mm Cutting length (shank): 18 mm Cutting edges: 3 Total length: 160 mm Cutting angle: 90° Special features Compatible inserts: ADMX 0702 Compatible insert manufacturer: Pramet Torx screw: M2x4.2 Torx key size: T6 FAQ Which inserts fit this milling cutter? The holder is specified for ADMX 0702 indexable inserts; compatible grades and geometries from Pramet can be used with the S759TM. What is the shank diameter and why does it matter? A 16 mm shank provides secure toolholding and rigidity, reducing vibration and improving repeatability during milling operations with the S759TM. How many cutting edges are available per insert and how are they secured? Each position uses an insert with three cutting edges; the inserts are secured with a Torx M2x4.2 screw and tightened using a T6 key for reliable clamping and repeatable indexing. For what types of machining is this tool intended? The tool is intended for indexable-insert milling operations where ADMX 0702 inserts are specified, offering reliable shoulder and face milling geometry thanks to its 90° cutting angle. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm Shank Cutter For APKT 1003-1604 Indexable Inserts, 2 Flutes 90° Cutting Angle, 50mm Cutting Length - Teknik Makina
Benefit from precise compatibility with APKT 1003–1604 indexable inserts, a robust 16 mm shank and a 50 mm effective cutting length for dependable, high‑productivity milling; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter S035TM – 16 mm shank, for APKT 1003–1604 indexable inserts (Teknik Makina) The Shank milling cutter S035TM is engineered for efficient face and shoulder milling with APKT 1003–1604 indexable inserts, suitable for CNC and automated toolholders across light to medium machining tasks 16 mm shank diameter Compatible with APKT 1003–1604 inserts 50 mm cutting length Torx screw M2.5x5.5, T8 key Higher throughput through proven indexable insert compatibility The cutter delivers measurable productivity gains by using industry-standard APKT 1003–1604 indexable inserts, enabling rapid insert changes and consistent cutting performance. With a 16 mm shank and a 50 mm cutting length, the tool offers a balance between rigidity and reachable engagement depth; this reduces vibration and supports stable cutting forces. The two-flute geometry provides a controlled chip evacuation rate, which helps maintain cycle times while protecting workpiece integrity during face and shoulder operations. Simple handling and secure clamping reduce downtime Tool changeover and repeatable clamping are simplified by the standardised fixing: a Torx M2.5x5.5 screw tightened with a T8 key ensures repeatable torque and a secure seat for the indexable insert. The robust overall length of 150 mm gives sufficient reach for many setups without compromising rigidity. Together, these attributes reduce adjustment time at the machine and lower the risk of incorrect seating, supporting continuous production and fewer stoppages. Practical benefits for the workshop workflow Specifically designed for compatibility with YG‑1 insert systems, the cutter supports flexible inventory management and easy sourcing of replacement inserts. Its 90° cutting angle makes it well suited to shoulders and square faces, delivering clean finishes with minimal secondary machining. The tool’s modest mass (0.32 kg) contributes to straightforward handling and less wear on toolholders during frequent changes. For operations where consistent insert indexing and predictable results matter, this shank cutter is an efficient, cost‑conscious choice. Contact Metav Werkzeuge for tailored specification checks and ordering advice on the Teknik Makina Shank milling cutter S035TM to ensure exact compatibility with existing APKT 1003 insert stocks Technical data Article number: S035TM Manufacturer: Teknik Makina SKU: S035TM Designation: Shank milling cutter for APKT 1003–1604 indexable inserts Facts Shank diameter: 16 mm Cutting length: 50 mm Overall length: 150 mm Diameter: 16 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 0.32 kg Special features Compatible inserts: APKT 1003 Compatible insert manufacturer: YG-1 Torx screw: M2.5x5.5 Torx key size: T8 FAQ What inserts fit this cutter? The cutter accepts APKT 1003–1604 indexable inserts; compatibility with YG‑1 variants is indicated in the technical data for the S035TM. Is the shank size suitable for standard toolholders? Yes, the 16 mm shank conforms to common toolholder specifications used in many CNC milling setups, providing good balance between rigidity and reach. What applications is the cutter best for? The tool is optimised for face and shoulder milling with a 90° cutting angle, offering clean finishes and efficient material removal in light to medium machining tasks. How is the insert secured? Insert clamping uses a Torx M2.5x5.5 screw, tightened with a T8 key, which ensures repeatable torque and reliable seat retention. Can this cutter reduce changeover time? Yes; the indexable insert system and standardised fixing method are designed to speed insert replacement and reduce machine downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Shank Cutter For APMT 11T3 Indexable Inserts, 2 Flutes 30mm Cutting Length, 90° - Teknik Makina
Benefit from a combination of stable toolholding, quick insert changes and extended reach to keep machining cycles efficient and predictable; the robust 16 mm shank and secure Torx clamping reduce downtime and vibration. Order the cutter directly via Metav Werkzeuge or consult our technical team for application advice. S230TM — shank cutter for APMT 11T3 indexable inserts, 16 mm shank (Teknik Makina) S230TM is a shank milling cutter designed for use with APMT 11T3 indexable inserts, offering secure Torx clamping and a 180 mm overall length for extended access in workpieces Compatible with APMT 11T3 indexable inserts 16 mm shank for stable toolholding 180 mm overall length for extended reach Secured with Torx M2.5x5.5 and T8 key Engineered stability for consistent metal removal The cutter is built around a 16 mm shank, giving a high level of rigidity that stabilises the tool under load. With two cutting edges, the tool balances material removal rate and surface finish while maintaining consistent chip formation. Compatibility with APMT 11T3 inserts from recognised manufacturers such as Korloy allows predictable edge geometry and straightforward inventory management for indexable tooling systems. The design helps to reduce chatter and extend insert life, which in turn supports steady production throughput. Reach and geometry that support accurate shoulder milling A 30 mm cutting length paired with an 180 mm overall length provides the reach required for recessed or deeper features without frequent tool changes. The 90° cutting angle is ideal for square-shoulder and face-milling operations, enabling clean, perpendicular surfaces with minimal rework. At approximately 0.28 kg, the assembly remains light enough to avoid unnecessary spindle load while retaining sufficient mass for smooth cutting action. This balance between reach and rigidity contributes directly to repeatable part quality on batch and single-item runs. Rapid insert replacement and secure clamping minimise downtime Maintenance is simplified by a proven Torx clamping arrangement: Torx M2.5x5.5 screw secured with a T8 key, which makes insert changes fast and repeatable. Indexable inserts deliver economic benefits because only the insert is consumed, not the whole cutter body. The combination of secure fastening and standardised inserts reduces changeover time on the shop floor, improves operator safety during tool handling and helps maintain consistent cutting conditions across shifts. The result is lower life-cycle costs and higher machine uptime. For tailored application advice or to purchase the Teknik Makina S230TM through Metav Werkzeuge, please contact our team at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert support. Technical data Article number: S230TM Manufacturer: Teknik Makina Designation: Shank cutter for APMT 11T3 indexable inserts Core dimensions Shank diameter: 16 mm Cutting length: 30 mm Overall length: 180 mm Cutting edges: 2 Cutting angle: 90° Weight: 0.28 kg Compatibility & fastening Suitable for APMT 11T3 indexable inserts Compatible with Korloy inserts Torx screw: M2.5x5.5 Torx key: T8 FAQ What insert type does this cutter use? The S230TM shank cutter is designed for APMT 11T3 indexable inserts; compatible inserts from Korloy were specified for reliable performance. Is the tool suitable for deep pocketing tasks? With a 30 mm cutting length and 180 mm overall length, this shank cutter provides extended reach for recessed features while preserving rigidity for accurate machining. How are inserts secured to the cutter body? Inserts are clamped using a Torx screw (M2.5x5.5) tightened with a T8 key, ensuring a reproducible and secure fastening for safe, efficient insert changes. Can this cutter be used for shoulder milling with perpendicular faces? Yes. The 90° cutting angle and the stable 16 mm shank are appropriate for square-shoulder and face-milling operations that require perpendicular wall finishes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Shank Cutter For APXT 1003 Indexable Inserts, 2 Flutes 60mm Cut Length, 90° - Teknik Makina
Take advantage of a rigid 16 mm shank and an indexable design compatible with APXT 1003 inserts to reduce changeover time and keep production stable; order the tool directly via Metav Werkzeuge or consult our specialists for application support. S182TM shank cutter – 16 mm shank, 2‑edge indexable cutter for APXT 1003 (Teknik Makina) The S182TM shank cutter is an indexable milling tool engineered for reliable face and slot milling on CNC machinery, designed specifically to accept APXT 1003 indexable inserts for efficient production workflows Indexable design for APXT 1003 inserts 16 mm shank for stable clamping 60 mm cutting length for deep cuts Supplied with M2.5x5.5 Torx clamping screw Consistent rigidity for improved process stability A generous 16 mm shank provides the axial and radial stiffness required for repeatable machining in series work. The robust shank diameter reduces vibration and deflection, which translates into a more consistent surface finish and extended insert life. For operations where tool stability shortens cycle time and lowers scrap, this shank geometry offers a tangible productivity advantage without complex setup changes. Fast changeover and cost-effective cutting with indexable inserts Compatibility with APXT 1003 indexable inserts and a two‑edge configuration simplifies maintenance and inventory: worn edges are rotated or replaced instead of exchanging the complete cutter. The 60 mm cutting length and 90° cutting angle make the tool suitable for face milling and light shoulder cuts, while the use of indexable inserts keeps tooling costs predictable. Indexable systems reduce machine downtime and support a lean tooling strategy in mid- to high-volume production. Practical handling and secure clamping for workshop use Tool maintenance and clamp security are straightforward: the cutter is supplied with an M2.5x5.5 Torx clamping screw and requires a T8 Torx key for reliable insert retention. With an overall length of 200 mm and a weight of 0.48 kg, the cutter balances reach and handling for setups on common milling heads and tool holders. The combination of measured mass and standard clamping hardware simplifies stocking and replacement in professional workshops and manufacturing cells. Contact Metav Werkzeuge for tailored application advice and to secure the S182TM shank cutter from Teknik Cutting Tools via our Emmerich hub — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: S182TM Manufacturer: Teknik Makina Core specifications Shank diameter: 16 mm Cutting length: 60 mm Overall length: 200 mm Diameter: 16 mm Number of cutting edges: 2 Weight: 0.48 kg Features Compatible inserts: APXT 1003 Suitable insert manufacturer: Korloy Cutting angle: 90° Torx screw: M2.5x5.5 Torx key: T8 FAQ Is the cutter compatible with Korloy inserts? Yes. The S182TM shank cutter is specified to accept APXT 1003 inserts and is listed as compatible with Korloy insert types. How many cutting edges does the cutter have? The tool features two cutting edges, offering a balance between metal removal rate and insert economy for general milling tasks. What clamping hardware is required for the inserts? Clamping is secured with an M2.5x5.5 Torx screw; a T8 Torx key is used for tightening and insert changes. What are the key dimensions to check for machine compatibility? Key dimensions are a 16 mm shank diameter, 60 mm cutting length, and 200 mm overall length; confirm your tool holder accommodates a 16 mm shank and the required reach. Can the tool be used for face milling and slotting? Yes. The 90° cutting angle and the 60 mm cutting length make the cutter suitable for face milling and shallow slotting operations in standard CNC applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Shank Cutter For AXMT 0602 And APKT 0903 Indexable Inserts, 2 Flutes, 40mm Cutting Length - Teknik Makina
Take advantage of a compact yet robust shank cutter that combines secure clamping and straightforward insert compatibility for consistent milling performance; the tool’s 16 mm shank, 40 mm cutting length and compatibility with AXMT 0602 / APKT 0903 indexable inserts make it a practical choice for flexible shop-floor setups — order via Metav Werkzeuge or consult the technical team for specification checks. S014TM Shank cutter — 16 mm shank, for AXMT 0602 & APKT 0903 inserts | Teknik Makina The S014TM is a shank cutter engineered for rapid fitting of AXMT 0602 and APKT 0903 indexable inserts, intended for general metalworking milling tasks where predictable chip control and simple insert change are required 16 mm shank for secure clamping Compatible with AXMT 0602 & APKT 0903 Two cutting edges for smooth material removal Torx M2.5x5.5 fixing screw (T8) Reliable compatibility with indexable inserts for fast tool changes The S014TM delivers a pragmatic approach to insert-based milling by accepting common AXMT 0602 and APKT 0903 formats, which simplifies inventory and tool management. Indexable inserts permit quick replacement of the cutting geometry without full tool regrinding, reducing downtime. The option to use inserts from established manufacturers such as Taegutec supports supply flexibility and predictable cutting performance, while the standardised insert formats facilitate straightforward integration into existing tooling systems. Stable clamping and precise fixing minimise vibration and tolerance drift A 16 mm shank combined with a secure fixing arrangement ensures firm seating in the spindle or toolholder, improving run-out behaviour and contributing to repeatable results. The tool is secured using a Torx M2.5x5.5 screw tightened with a T8 key, delivering reliable insert retention under intermittent loads. The presence of two cutting edges balances the forces during cutting, which helps reduce chatter and extends useful insert life — a practical benefit for everyday production where stability and repeatability matter. Geometry and proportions that support consistent chip evacuation With a 40 mm cutting length and an overall length of 120 mm, the cutter provides an effective reach for common milling tasks while keeping overhang reasonable to preserve rigidity. The configuration supports controlled chip formation and evacuation when paired with the correct insert grade and cutting parameters. For applications where tool access is constrained, the compact overall length helps maintain stiffness; combined with the cutter’s modest mass, handling and tool changes remain straightforward on the shop floor. Practical workshop integration and maintenance guidance The S014TM is lightweight at 0.195 kg, making handling and storage uncomplicated. Routine maintenance is limited to periodic inspection of the clamping screw and correct seating of the insert; the standard T8 key simplifies torque application and routine checks. For procurement and deployment, the cutter suits workshops seeking a modular milling solution that reduces per-cutting-edge costs through insert replacement rather than full-tool refurbishment. Contact Metav Werkzeuge for procurement and tailored technical advice from Emmerich — assistance is available for specification checks and order placement Technical Data Article number: S014TM Manufacturer: Teknik Makina Designation: Shank cutter for AXMT 0602 and APKT 0903 indexable inserts SKU: S014TM Facts Shank diameter: 16 mm Cutting length: 40 mm Number of cutting edges: 2 Overall length: 120 mm Weight: 0.195 kg Design & Compatibility Compatible inserts: APKT 0903, AXMT 0602 Compatible insert manufacturer: Taegutec Fixing screw: M2,5x5,5 (Torx) Torx key: T8 Diameter: 16 mm FAQ Which insert types fit this shank cutter? The S014TM accepts AXMT 0602 and APKT 0903 indexable inserts; both formats are supported for flexible tool management. Is the cutter compatible with Taegutec inserts? Yes — the S014TM is listed as compatible with inserts from Taegutec in the product specification. What is the shank diameter and overall length? Shank diameter is 16 mm and the overall length is 120 mm for the S014TM. Which screw and key secure the insert? The insert is secured with a M2.5x5.5 Torx screw, tightened using a T8 key. What maintenance is recommended for long service life? Regular inspection of the clamping screw and correct seating of inserts is recommended; the S014TM’s simple fixing system facilitates quick checks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
High-performance shank cutters and ball nose cutters for efficient milling
Insert shank cutters and ball nose cutters combine flexibility and productivity for a wide range of milling tasks. The category covers steel-bodied shank cutters fitted with indexable inserts for economical roughing, face milling, cornering and slotting, as well as ball nose cutters for contouring and 3D finishing.
How these tools work and where they belong
Shank cutters with indexable inserts use a carrier body made from hardened steel; the cutting edges are provided by removable inserts rather than a solid tool blank. Where tools do not have internal coolant, process heat and chips are managed via external coolant nozzles or compressed air, which is sufficient for open, surface-level and easily accessible milling on standard materials. Shank cutters with internal coolant feature fine internal channels that deliver coolant or blasting air directly to each cutting edge under pressure. This targeted supply is essential for deep pockets, cavities, full slotting and machining of heat-resistant or difficult-to-machine materials, because it prevents chip re-cutting, protects cutting edges from thermal overload and enables higher feed rates and improved surface quality.
Cut cycle times and reduce tooling costs
- Replaceable indexable inserts reduce consumable costs and shorten tool change time.
- Targeted internal coolant improves chip evacuation and extends insert life.
- Robust steel carrier bodies enable heavy-duty roughing without frequent tool replacement.
- Suitable for roughing, planing, corner milling and slot milling as well as precision 3D profiling with ball nose cutters.
A practical choice for purchasing and stocking tools
Metav brings a pragmatic purchasing advantage: a broad range of milling solutions is available from a single European quality hub. Metav’s focus on democratising precision means workshops benefit from a wide assortment, consistent quality control from Emmerich and steady supply — supported by decades of expertise and over 48,000 satisfied customers. Choose Metav for a centralised sourcing strategy that reduces supplier complexity while keeping access to both insert milling cutters (also referred to as insert milling cutters or indexable end mills) and ball nose cutters (also known as ball nose end mills or radius cutters) straightforward.
Quick summary
Insert shank cutters and ball nose cutters deliver flexible, cost-effective milling: replaceable inserts lower running costs, and internal coolant options enable higher performance and longer tool life where chip control is critical.
FAQ
When should I choose a shank cutter with indexable inserts rather than a solid carbide end mill?
Choose shank cutters with indexable inserts for economical roughing and high-stock-removal tasks where replacing inserts is preferable to replacing an entire tool; they are especially effective for face milling, cornering and slotting operations.
Does internal coolant make a measurable difference for ball nose cutters?
Yes. Internal coolant directed to each cutting edge reduces chip re-cutting and thermal stress, which improves surface finish and increases insert life when machining deep pockets, cavities or heat-resistant materials.
Can shank cutters without internal coolant be used for general workshop milling?
Absolutely. Tools without internal coolant rely on external coolant nozzles or compressed air and are well suited to open, superficial and easily accessible milling on standard materials.
What milling operations are shank cutters for indexable inserts typically used for?
Shank cutters with indexable inserts excel at economical roughing, planfräsen (face milling), corner milling and slot milling; ball nose cutters are the preferred choice for 3D profiling and finishing operations.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com