Efficient shaft cutters and ball nose cutters for versatile milling
Shaft cutters and ball nose cutters serve as robust rotating tools for roughing, face milling, corner milling and slotting, offering economical replacement of indexable inserts rather than whole solid tools. Available in versions with internal coolant to feed lubricant directly to each cutting edge or without internal coolant relying on external nozzles, these cutters ensure effective chip evacuation and thermal control suited to standard materials or deep pocket and cavity work. By preventing chip re-cutting and protecting cutting edges, they deliver higher feed rates, improved surface finish and extended tool life in demanding metalworking applications.
16mm Shank Cutter for ENMX 0604 Indexable Inserts, 2 Flutes - Teknik Makina
Take advantage of a compact, indexable system that combines a 16 mm shank, compatibility with ENMX 0604 inserts and a secure M2.5x7 Torx clamp for reliable toolholding in batch production — order via Metav Werkzeuge or consult the team for specification matching. Shaft milling cutter S105TM — 16 mm shank, for ENMX 0604 indexable inserts (Teknik Makina) A Shaft milling cutter S105TM engineered for machining set-ups using ENMX 0604 indexable inserts, offering a compact 16 mm shank and standard Torx clamping for straightforward insert changes Compatible with ENMX 0604 indexable inserts 16 mm shank for secure toolholder mounting Torx M2.5x7 screw with T8 key for insert clamping Two cutting edges for efficient material removal Stable mounting for consistent cycle times The combination of a 16 mm shank and a standardised clamping interface ensures stable mounting in common toolholders, which reduces vibration and supports repeatable process parameters. The design accepts ENMX 0604 indexable inserts (compatible with YG-1 plate types), allowing quick insert changes without special adapters. With a dedicated M2.5x7 Torx screw and a T8 key for clamping, the toolhead achieves predictable seating force and ease of maintenance, so downtime for insert replacement is minimised. Efficient removal and tool life benefits Equipped with two cutting edges, the cutter balances material removal rate with manageable cutting forces for many common milling tasks in production environments. The geometry delivers steady chip evacuation and contributes to consistent surface finish while limiting radial load on the spindle. The 100 mm overall length provides reach for slightly recessed features without compromising stiffness, which supports stable machining and fewer rework cycles. Procurement-ready design for workshop integration Marked for clear procurement, the item is listed under eClass 21180806 and ETIM EC011860, which simplifies stock management and ERP integration. The SKU S105TM and the Teknik Makina build quality align with standard workshop tool inventories, enabling straightforward replacement strategies and part tracking. The straightforward mechanical design reduces the need for special tooling and fits established maintenance routines, supporting uninterrupted production flow. Discuss the S105TM with Metav Werkzeuge for reliable supply and tailored technical advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S105TM Manufacturer: Teknik Makina eClass: 21180806 ETIM: EC011860 Facts Diameter: 16 mm Shank diameter: 16 mm Overall length: 100 mm Cutting edges: 2 Special features Compatible inserts: ENMX 0604 Compatible insert manufacturer: YG-1 Clamping screw: M2.5x7 Torx Torx key size: T8 FAQ Which indexable inserts fit this cutter? The S105TM accepts ENMX 0604 indexable inserts and is compatible with insert types supplied by YG-1, allowing use of common plate geometries. What shank size is required for the toolholder? The tool has a 16 mm shank, so a holder or collet rated for 16 mm shanks is required for secure mounting. How are the inserts fastened to the cutter? Inserts are secured with an M2.5x7 Torx screw; a T8 Torx key is used for tightening and removal. What are the overall dimensions relevant for setup? Key dimensions are a 16 mm diameter and a 100 mm overall length, suitable for setups needing modest reach with retained stiffness. Are there procurement codes for inventory systems? Yes — the cutter is listed under eClass 21180806 and ETIM EC011860, which aids in ordering and ERP integration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Shank Cutter For LNMX 1006 Indexable Inserts With Internal Coolant, 90mm Length - Teknik Makina
Benefit from the combination of internal coolant, a stable 16 mm shank and compatibility with LNMX 1006 indexable inserts for reliable, repeatable milling results; order the tool directly via Metav Werkzeuge or consult the specialists if further technical details are required. 16 mm Shank Milling Cutter for LNMX 1006 Indexable Inserts (LN096-1TM) – Teknik Makina The 16 mm shank milling cutter for LNMX 1006 indexable inserts is designed for precision milling operations where coolant-fed cutting and secure insert fixation are essential. 16 mm shank for secure, precise clamping Internal coolant for improved chip evacuation Compatible with LNMX 1006 Korloy inserts 90 mm overall length for extended reach Stable clamping for consistent precision A rigid 16 mm shank and precisely milled body reduce runout and vibration, delivering a higher-quality surface finish and predictable tool life. The tool's design focuses on repeatability in production environments, so setups remain consistent across batches. The result is improved process stability and fewer reworked parts, which supports efficient machining cycles and lower scrap rates. Optimised cooling and chip control Integrated internal coolant channels direct cutting fluid close to the cutting edge, enhancing cooling and lubrication at the contact zone. This targeted coolant supply improves chip evacuation, reduces thermal load on the insert and helps prevent built-up edge during continuous or interrupted cuts. The cooling concept enables more stable cutting conditions and can allow for more aggressive cutting parameters within safe limits. Fast insert changes and secure fastening Designed for use with LNMX 1006 indexable inserts from Korloy, the cutter uses a Torx screw ( M3x7 ) with a T8 drive for reliable clamping. The single-cutting-edge configuration simplifies indexing and replacement, reducing machine downtime during tool exchanges. Clear mechanical fixation ensures repeatable seating of the insert, which supports consistent cutting geometry and eases workshop logistics for insert stocking and tool upkeep. Practical integration into the workshop With a 90 mm overall length and a 25 mm cutting length, this shank milling cutter balances reach and rigidity for a variety of milling tasks in production and job-shop settings. The relatively low mass helps limit additional spindle load while maintaining sufficient stiffness for stable cuts. Supplied as a dedicated indexable-insert solution, the LN096-1TM is straightforward to integrate into established tool holders and presetting routines, supporting reliable cycle times and predictable maintenance planning. Request a technical consultation or a quotation from Metav Werkzeuge for the Teknik Makina shank milling cutter LN096-1TM; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options. Technical Data SKU: LN096-1TM Manufacturer: Teknik Makina Product type: Shank milling cutter Compatible inserts: LNMX 1006 (Korloy) Facts Shank diameter: 16 mm Overall length: 90 mm Cutting length: 25 mm Weight: 0.141 kg Cutting edges: 1 Special features Internal coolant: yes Torx screw: M3x7 Torx key size: T8 FAQ Which indexable inserts fit this cutter? The cutter accepts LNMX 1006 indexable inserts; Korloy-manufactured LNMX 1006 inserts are compatible with the LN096-1TM system. Is there internal coolant supply? Yes, the tool incorporates internal coolant channels to deliver fluid directly to the cutting zone for improved chip evacuation and temperature control. What fastening hardware is required for the inserts? Insert clamping uses a Torx screw M3x7 with a T8 drive; the secure fixing supports repeatable seating and simple replacement. What are the typical workshop applications for this cutter? The shank milling cutter is intended for precision milling tasks where indexable-insert systems are preferred, offering stable clamping, coolant-fed cutting and easy insert changes for production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Shank Cutter for SOMT 11T3 Indexable Inserts 45° Cutting Angle, 32mm Cutting Height - Teknik Makina
Take advantage of precise compatibility, a rigid 16 mm shank and a 45° cutting angle designed for controlled chamfering; order the tool via Metav Werkzeuge or consult the Metav team for application-specific advice. Shaft milling cutter S769TM — 16 mm shank, for SOMT 11T3 indexable inserts by Teknik Makina The Shaft milling cutter S769TM is a compact, indexable-insert milling tool engineered for light to medium-duty chamfering and profile milling with SOMT 11T3 inserts For SOMT 11T3 indexable inserts 16 mm shank diameter 32 mm cutting height 45° cutting angle Reduced downtime through fast insert changes The core advantage of this cutter is its compatibility with SOMT 11T3 indexable inserts, which enables quick replacement of cutting edges instead of regrinding. The clamping system uses a Torx M3.5x8.5 screw tightened with a T15 key, providing secure fixation with a simple, reproducible routine. For production environments this means shorter tool-change cycles and higher availability of spindle time, supporting predictable work scheduling and lower indirect costs. Stable performance from a compact, rigid design A 16 mm shank and a 100 mm overall length deliver an attractive balance between accessibility and rigidity for small to medium toolholders. The 32 mm cutting height allows effective engagement depth while the modest mass (0.153 kg) reduces centrifugal load at higher spindle speeds. These dimensional characteristics translate into consistent cutting behaviour, easier tool-holder selection and reduced vibration during interrupted cuts, which benefits surface finish and tool life. Precise chamfers and clean contours with a 45° geometry Configured with a 45° cutting angle, the tool excels at producing defined chamfers and bevels in a single pass, reducing the need for secondary operations. The arrangement with a single cutting edge simplifies chip control and enables straightforward cutting-force prediction, which is useful when programming CAM routines. For users unfamiliar with the term, the cutting angle describes the flank orientation relative to the tool axis and determines the chamfer profile produced on the workpiece. Practical compatibility and handling in the workshop Designed to accept inserts from established manufacturers and noted as compatible with Palbit inserts in the data, the cutter fits common industry supply chains. The combination of standardised insert format and Torx fixation supports routine servicing by skilled operators without special equipment. The compact weight and shank size also make mounting and balancing straightforward during tool set-up, contributing to faster machine readiness and repeatable process parameters. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina S769TM shaft milling cutter into production or to request detailed dimensional drawings and stock availability — Metav Werkzeuge, Emmerich: +49 2822 7131930, info@metav-werkzeuge.com Technical Data Article number: S769TM Manufacturer: Teknik Makina Description: Shaft milling cutter for SOMT 11T3 indexable inserts Facts Shank diameter: 16 mm Cutting height: 32 mm Cutting angle: 45° Overall length: 100 mm Weight: 0.153 kg Number of cutting edges: 1 Diameter: 16 Special features For SOMT 11T3 indexable inserts Compatible with Palbit inserts Torx screw M3.5x8.5 and Torx key T15 Manufacturer SKU: S769TM Brand: Teknik Makina FAQ Which insert type fits this cutter? The cutter is made for SOMT 11T3 indexable inserts; compatible insert models from established brands such as Palbit can be used. How are the inserts secured and changed? Inserts are fixed with a Torx M3.5x8.5 screw; a T15 key is used for tightening and removal, allowing quick and reproducible insert changes. What are the key dimensions to consider for tool-holder selection? Relevant dimensions include a 16 mm shank diameter, 100 mm overall length and 32 mm cutting height, which determine suitable collets and holders for stable clamping. Is this tool suitable for chamfering operations? Yes — the 45° cutting angle is optimised for chamfers and bevels, enabling precise profile creation in a single pass. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Shank Cutter For XNKU 06T3 Indexable Inserts With Internal Cooling, 110mm L - Teknik Makina
The combination of a 16 mm shank, internal coolant and compatibility with XNKU 06T3 indexable inserts delivers stable machining with straightforward insert changes; this supports continuous shop throughput and predictable tool costs. Order the Teknik Makina end mill directly via Metav Werkzeuge or consult the Metav team for application pairing. S778TM 16 mm indexable insert end mill with internal coolant by Teknik Makina A S778TM 16 mm indexable insert end mill designed for use with XNKU 06T3 indexable inserts, offering through-coolant capability and a compact 110 mm overall length for general milling tasks 16 mm shank for rigid toolholders Internal coolant for improved chip evacuation Compatible with XNKU 06T3 Palbit inserts 110 mm overall length for deep milling applications Stable cutting performance that reduces downtime The 16 mm shank and two cutting edges create a rigid interface between spindle and cutter, which reduces vibration and runout during intermittent and continuous cuts. With a compact 110 mm overall length and a 40 mm cutting length, the geometry is tailored to maintain concentricity in confined setups and shorter overhangs. This stability translates into fewer rejected parts and longer intervals between balancing or inspection, supporting reliable production planning. Through-coolant system for improved insert life and finish Integrated internal coolant directs cutting fluid close to the cutting edge, assisting chip evacuation and heat control at the cutting zone. Better coolant delivery reduces thermal loading on the insert noses and flank faces, which helps preserve the insert geometry and extend service life. For shops seeking consistent surface quality and reduced rework, the coolant-fed design offers a technical advantage that simplifies process control and lowers per-part tooling costs. Fast insert changes and maintenance for efficient workflows Designed for indexable tooling, the cutter accepts XNKU 06T3 inserts and uses a Torx T8 drive with an M2.5x5.5 fastening screw, enabling quick, repeatable insert replacement. The modest tool mass of 0.148 kg and standardised fastening make handling and maintenance straightforward for assembly-line technicians and toolroom staff. Spare-part handling is simplified by common fasteners and the widespread availability of matched Palbit inserts, helping to keep spindle downtime to a minimum. Versatile pairing and practical recommendations for workshops The cutter integrates into existing 16 mm toolholder systems and is well suited to shops that favour indexable solutions for cost-effective material removal. When paired with appropriate XNKU 06T3 grades from Palbit, the end mill supports a range of milling strategies from light shoulder passes to modest slotting, depending on the chosen insert geometry. For best results, select toolholder clamping that minimises runout and verify coolant pressure settings to ensure efficient evacuation of chips through the internal channel. Contact Metav Werkzeuge for technical matching, availability and to arrange delivery of the Teknik Makina S778TM indexable insert end mill with internal coolant Technical data SKU: S778TM Manufacturer: Teknik Makina Product type: Indexable insert end mill Label: 16 mm shank end mill XNKU 06T3 L110 mm with internal coolant Facts Diameter: 16 mm Overall length: 110 mm Cutting length (shank length of cut): 40 mm Weight: 0.148 kg Cutting edges: 2 Special features Internal coolant: yes Compatible inserts: XNKU 06T3 Compatible insert manufacturer: Palbit Torx key: T8 Fastening screw: M2.5x5.5 eClass: 21180806 FAQ What inserts fit this end mill? The S778TM accepts XNKU 06T3 indexable inserts; pairing with Palbit XNKU 06T3 grades is recommended for compatibility and predictable seating. Does the cutter supply internal coolant? Yes, the S778TM is equipped with internal coolant, designed to deliver fluid close to the cutting zone for improved chip control and insert life. Which toolholder shank is required? A toolholder for a 16 mm shank is required; the cutter is intended for rigid clamping to maintain concentricity and reduce runout. How is the insert secured and what tool is needed? Inserts are fastened with an M2.5x5.5 screw tightened using a Torx T8 key for secure, repeatable clamping. What are the key dimensions to consider for setup? Key dimensions: 16 mm diameter, 110 mm overall length and 40 mm cutting length; the weight is 0.148 kg, which aids in setup calculations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Shank End Mill For ANHX 1004-1206 Indexable Inserts, 25mm Cutting Length, 90° Cutting Angle - Teknik Makina
Combining a rigid 16 mm shank with compatibility for ANHX 1004–1206 indexable inserts ensures efficient, cost-conscious milling and straightforward insert changes; benefit from a compact 160 mm overall length and secure Torx clamping for reliable workshop performance. Order the S782TM directly via Metav Werkzeuge or consult their specialists for technical guidance and fast supply. Schaftfräser S782TM — Shank milling cutter with 16 mm shank for ANHX 1004–1206 (Teknik Makina) The Schaftfräser S782TM is a precision shank milling cutter designed for use with ANHX 1004–1206 indexable inserts, combining compact dimensions and sturdy clamping for general workshop and production tasks 16 mm shank diameter for standard toolholders Compatible with ANHX 1004–1206 indexable inserts Two cutting edges for effective material removal 160 mm overall length for practical reach Precise indexable milling that reduces tooling costs This indexable-insert cutter is designed to make tooling more economical: by using standard ANHX 1004–1206 indexable inserts the system separates cutting geometry from the body, lowering running costs and enabling quick replacement. The 16 mm shank and standardised insert pocket ensure straightforward integration into existing toolholders, while the two cutting edges provide efficient chip removal and steady material engagement. For shops managing variety in small and medium runs, the modular approach offers reproducible cuts and simplified inventory. Robust design for dependable handling and secure clamping Engineered for consistent performance, the cutter presents a 90° cutting angle and a 160 mm overall length, giving a balance between rigidity and reach. The lightweight body (approx. 0.036 kg) reduces spindle load, and the Torx T8 key with an M3x7 screw secures the insert reliably, lowering the risk of loosening under intermittent heavy cuts. Compatibility with insert manufacturer Palbit ensures access to a wide range of grades and geometries; this aids optimisation for different materials without retooling the shank. Practical workshop benefits and supply reliability Suitable for conventional milling tasks where indexable insert solutions are preferred, this cutter supports efficient workshop workflows and rapid uptime after tool changes. The compact configuration and standardised clamping mean less time on setup and more time cutting, which is particularly valuable in maintenance and small-batch production. Metav’s supply and quality filter for the European market reinforces availability and consistent specification, supporting dependable replenishment and reduced procurement complexity. For reliable milling performance choose the Teknik Makina S782TM shank milling cutter and secure procurement through Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and swift delivery. Technical Data Article number: S782TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Weight: 0.036 kg Shank diameter: 16 mm Cutting length: 25 mm Cutting angle: 90° Diameter: 16 mm Overall length: 160 mm Cutting edges: 2 Special features Suitable for ANHX 1004–1206 indexable inserts Compatible insert manufacturer: Palbit Torx key: T8 Torx screw: M3x7 SKU: S782TM FAQ Which indexable inserts fit this cutter? The S782TM is designed for ANHX 1004–1206 indexable inserts, allowing use of standard Palbit insert geometries for varied machining tasks. What is the shank diameter and overall length? Shank diameter is 16 mm and the overall length is 160 mm, specified for integration with common toolholders and moderate reach requirements. How many cutting edges does the tool have and what is the cutting angle? The cutter has 2 cutting edges and a 90° cutting angle, suited to straightforward milling operations and reliable chip evacuation. What clamping hardware is used to secure the insert? The insert is secured with a Torx T8 drive and an M3x7 screw, providing stable fixation for machining forces. Is the S782TM suitable for small-batch production and workshop maintenance? Yes — the modular insert system and compact shank make the S782TM well suited to small-batch production, maintenance work and situations where quick insert changes improve uptime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Shank End Mill for BLMP 0603 Indexable Inserts Internal Coolant, 40mm Cutting Length - Teknik Makina
Take advantage of robust insert compatibility and integrated coolant to maintain productivity and tool life; combine 16 mm nominal diameter, a 15 mm shank and internal coolant for stable machining. Order the cutter directly via Metav Werkzeuge or consult our specialists for application support. 16 mm Shank Cutter S479-3TM – indexable-insert milling tool with internal coolant by Teknik Makina 16 mm Shank Cutter S479-3TM for BLMP 0603 indexable inserts, designed for medium-reach milling where coolant-through capability and compact shank stiffness are required 16 mm nominal diameter Internal coolant for secure chip evacuation Compatible with BLMP 0603 inserts (Taegutec) Shank 15 mm, overall length 150 mm Reliable performance with insert milling and coolant-through control The 16 mm shank cutter S479-3TM is built for repeatable insert milling with a direct focus on process stability. Its internal coolant channel supplies cutting fluid directly to the cutting zone, improving chip control and helping to reduce edge wear on the BLMP 0603 inserts. With 2 cutting edges, the tool balances material removal and surface finish while keeping machine loads predictable. This configuration supports consistent cycle times and simplifies tool inventory when paired with standard insert grades from Taegutec. Compact geometry for stiffness and accessible reach A 15 mm shank combined with a 150 mm overall length and 40 mm cutting length provides a good compromise between reach and rigidity. The reduced overhang reduces vibration potential and supports stable clamping in common toolholders, while the modest mass (0.231 kg) keeps dynamic loads low. Fast insert changes are enabled by the M3x6.2 fastening screw, tightened with the specified T8 Torx key; this straightforward fastening method aids repeatable seating and secure clamping of the indexable inserts. Practical handling, maintenance and system fit The indexable design keeps running costs controlled by replacing worn inserts rather than the whole cutter body; the tool body remains serviceable given the standard screw and key sizes. The cutter’s compatibility statement — suited for BLMP 0603 indexable inserts and indicated Taegutec insert fit — simplifies procurement and tool setup across multiple machine lines. The compact form factor and the clear specification of fastening hardware also reduce downtime during routine insert changes or when stocking spare screws and inserts for uninterrupted production. For tailored advice on integrating the Teknik Makina 16 mm shank cutter with internal coolant into existing setups, and to arrange supply via Metav Werkzeuge GmbH in Emmerich, please contact our product specialists by phone or email for precise application guidance and availability. Technical data SKU: S479-3TM Manufacturer: Teknik Makina Designation: 16 mm shank cutter for BLMP 0603 indexable inserts, L150 mm, with internal coolant Facts Diameter: 16 mm Overall length: 150 mm Shank diameter: 15 mm Cutting length: 40 mm Number of cutting edges: 2 Weight: 0.231 kg Special features Internal coolant (coolant-through) Compatible with BLMP 0603 indexable inserts Insert manufacturer compatibility: Taegutec Torx key: T8 Torx screw: M3x6.2 FAQ What insert type fits this cutter? The cutter accepts BLMP 0603 indexable inserts; compatibility is specified for Taegutec insert grades and geometries. Is the tool supplied with the fastening screw and key? The tool uses an M3x6.2 Torx screw (Torx size T8) for insert fixation; check the delivery contents with the order to confirm included accessories. How does internal coolant benefit the machining process? Through-tool internal coolant delivers fluid directly to the cutting edge, improving chip evacuation and helping to reduce thermal load and edge wear on the inserts. What are the key dimensions for holder selection? Key dimensions: 16 mm nominal diameter, 15 mm shank, 150 mm overall length and 40 mm cutting length; use these to select a suitable collet or holder. Can the cutter be used across different machines? The tool’s compact shank and standard fastener sizes enable use on a variety of milling spindles and toolholders; confirm holder clamping capacity and coolant connection compatibility before use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Shank End Mill for LOGU 0303 Indexable Inserts Internal Coolant, 150mm - Teknik Makina
Take advantage of a compact, rigid design and coolant-through functionality to improve tool life and surface finish; the combination of compatibility with Kyocera LOGU 0303 indexable inserts and quick Torx fastening reduces downtime and simplifies tool management. Order directly via Metav Werkzeuge or consult our specialists for integration advice. Shaft milling cutter S677-1TM — 16 mm diameter, coolant-through design (Teknik Makina) The Shaft milling cutter S677-1TM for LOGU 0303 indexable inserts is a purpose-built cutter for precision milling tasks where fast insert changes and effective coolant delivery are required 16 mm shank diameter for high rigidity Internal coolant supply to the inserts Compatible with Kyocera LOGU 0303 inserts 50 mm cutting length for versatile milling Increased rigidity for consistent surface quality A compact 16 mm shank and a carefully proportioned overall length deliver a stiff toolholder assembly that reduces vibration and chatter during milling. The improved stability translates directly into better surface finish and extended insert life, meaning fewer interruptions for tool changes. For machine shops seeking repeatable accuracy, the balanced geometry of this cutter supports reliable performance in both peripheral and face milling operations. Coolant-through system for improved chip control and tool life The coolant-through configuration supplies coolant directly to the cutting edge, aiding lubrication and efficient chip evacuation. This targeted fluid delivery reduces heat at the cutting zone and helps prevent built-up edge, which in turn lowers wear rates on the inserts. For production environments that demand reduced rework and longer maintenance intervals, the internal coolant feature is a practical advantage that improves process stability. Fast, secure insert clamping to reduce downtime Designed for LOGU 0303 indexable inserts and compatible with Kyocera insert types, the cutter uses a Torx screw (M3x7) tightened with a T8 Torx key, enabling secure and repeatable clamping. The two cutting edges per insert permit economical index rotations before replacement, while the standardised fastening system keeps changeover times short. The result is a toolholder that supports efficient workshops by simplifying insert handling and reducing non-productive time. Practical dimensions for versatile machining applications With a cutting length of 50 mm and an overall length of 150 mm, the cutter suits a broad range of milling tasks where reach and rigidity must be balanced. The modest mass and compact envelope make it suitable for many CNC spindle interfaces while keeping inertia low enough for precise contouring. Compatibility with widely available LOGU 0303 inserts ensures easy sourcing of grades optimised for different materials and cutting conditions, supporting flexible production planning. Contact Metav Werkzeuge for tailored advice on integrating Teknik Makina's coolant-through shaft milling cutter and to discuss the right LOGU 0303 insert grades for specific machining tasks — our consultants will provide detailed support from Emmerich to your workshop. Technical data SKU: S677-1TM Product type: Shaft milling cutter Manufacturer: Teknik Makina Suitable for indexable inserts: LOGU 0303 (Kyocera) Internal coolant: yes Facts Diameter: 16 mm Overall length: 150 mm Shank diameter: 16 mm Cutting length: 50 mm Weight: 0.219 kg Cutting edges: 2 Torx key: T8 Torx screw: M3x7 eClass: 21180806 Special features Coolant-through supply to inserts Compatible with Kyocera LOGU 0303 indexable inserts Torx fastening for quick insert changes Two cutting edges per insert for economical indexing FAQ Which inserts fit this cutter? The cutter accepts LOGU 0303 indexable inserts; compatibility is specified for Kyocera insert ranges, so matching a LOGU 0303 grade from Kyocera is recommended for optimal clamping and performance. Is the coolant delivered to the cutting edge? Yes — the tool features internal coolant delivery that supplies fluid directly to the insert contact area to assist cooling and chip evacuation. What is the shank and overall length? The shank diameter is 16 mm and the overall length is 150 mm, with a cutting length of 50 mm for extended engagement where required. How are the inserts secured? Inserts are clamped using an M3x7 Torx screw tightened with a T8 Torx key, providing secure and repeatable fastening. How many cutting edges are available per insert? The system uses indexable inserts with two effective cutting edges, allowing economical rotation before replacement. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm Shank End Mill for XOMX 0602-1204 Indexable Inserts, 2 Flutes 45mm Cutting Length, 90° - Teknik Makina
Take advantage of a cost-efficient, insert-based approach with high rigidity and easy maintenance: the combination of an indexable shank milling cutter compatible with SECO XOMX inserts, a 16 mm shank and a 45 mm cutting length delivers stable material removal and reduced tooling costs—order or request advice directly via Metav Werkzeuge for procurement and technical support. S629TM — Indexable shank milling cutter, Ø16 mm shank, 2 cutting edges S629TM is an indexable shank milling cutter engineered for insert-based milling with a focus on rigidity, simple insert replacement and reliable performance in industrial environments Compatible with SECO XOMX 0602–1204 inserts 16 mm shank diameter for secure clamping 45 mm effective cutting length Two cutting edges for balanced, efficient cutting Lower tooling costs through insert compatibility and modularity The central advantage of an indexable system is the replacement of worn cutting edges rather than the whole tool. By accepting XOMX 0602–1204 indexable inserts and being compatible with SECO insert ranges, the tool significantly reduces per-cutting-edge cost and downtime. Insert change is straightforward and keeps spindle-free time to a minimum, which pays off across batch production and mixed-series work. The modular design supports fast adaptation of cutting geometry to changing process demands, making the tool an economical choice for workshops and production lines requiring flexibility. Rigidity and geometry for stable, high-quality milling A 16 mm shank and an overall length of 150 mm provide the necessary stiffness for repeatable slotting and face milling. The 45 mm cutting length combined with two cutting edges balances material removal rate and vibration control; two edges offer predictable chiploads and reduce the likelihood of chatter in medium-duty operations. The 90° cutting angle produces clean, square shoulders and is well suited to slotting, pocketing and shoulder milling tasks. Secure clamping is achieved via a M2.5x5.5 Torx screw with a T8 key, enabling firm insert retention and repeatable seating—important where concentricity and surface finish matter. Workshop practicality, maintenance and classification for procurement Handling and maintenance are simplified: the indexable system minimises regrinding and disposal, while the Torx tool interface makes insert changes fast and reliable. The tool’s modest mass (0.228 kg) supports efficient tool changes and reduced spindle wear during handling. For buyers and planners the product is classified under ECLASS 21180806 and ETIM EC011860, aiding cataloguing and procurement integration. The robust design suits industrial machine shops, CNC departments and production centres seeking a pragmatic blend of economy and consistent performance with recognised insert standards. For procurement, technical clarification or to discuss suitable inserts and machining parameters, contact Metav Werkzeuge—orders and expert advice are handled directly from Emmerich to ensure dependable supply and tailored support. Technical data SKU: S629TM Manufacturer: Teknik Makina Description: Indexable shank milling cutter for XOMX 0602–1204 indexable inserts ECLASS: 21180806 ETIM: EC011860 Core technical data Shank diameter: 16 mm Cutting length: 45 mm Overall length: 150 mm Diameter: 16 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 0.228 kg Special features Compatible with XOMX 0602–1204 indexable inserts Compatible with SECO insert systems Torx screw M2.5x5.5 for insert clamping Torx key size T8 required Indexable insert concept for reduced tooling cost FAQ Which inserts fit this shank milling cutter? The S629TM accepts XOMX 0602–1204 indexable inserts, compatible with SECO insert families for straightforward procurement and standardised replacement. Is the tool suitable for slotting and pocketing? Yes, the combination of a 90° cutting angle, 45 mm cutting length and two cutting edges makes the tool well suited to slotting and pocketing in medium-duty milling operations. What is the required tool for insert changes? Insert fastening uses a M2.5x5.5 Torx screw; a T8 Torx key is required for secure and repeatable clamping. Can this cutter be used on standard CNC machines? The cutter’s 16 mm shank and standard indexable-insert system are compatible with common toolholders and CNC setups in industrial workshops. How does the indexable design benefit production workshops? The indexable concept reduces per-edge costs, shortens downtime for maintenance and simplifies spare-part management, providing measurable savings in repetitive and batch production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Shank End Mill for XOMX 0602-1204 Indexable Inserts, 90° Cutting Angle, 2 Flutes - Teknik Makina
Take advantage of a compact, shank-mounted milling solution that combines stable clamping, short setup times and proven indexable-insert economics for continuous, reliable machining. Benefit from the 16 mm shank and 45 mm cutting length for secure toolholding and deep passes; order via Metav Werkzeuge or request application advice from our specialists. S627TM Insert milling cutter — shank Ø16 mm, 2 cutting edges (Teknik Makina) A S627TM shank-mounted cutter engineered for indexable-insert milling in industrial CNC and toolroom applications, offering stable clamping and efficient chip removal Shank diameter 16 mm for stable clamping 45 mm effective cutting length for deep passes Two cutting edges for efficient material removal Compatible with SECO indexable inserts Precision and stability for consistent cycle times The cutter body is designed around a Ø16 mm shank, delivering secure clamping in standard tool holders and reduced runout during high-speed rotation. With a 45 mm cutting length and an overall length of 120 mm, the tool balances reach and rigidity to maintain process stability across medium-depth milling operations. The double-flute geometry with two cutting edges reduces cutting forces per edge, which helps to lower vibration and improves surface regularity on the workpiece. A Torx M2.5x5.5 clamp screw (T8) ensures quick, repeatable insert fixation and stable seating of the insert in the pocket. Economical insert system that streamlines tooling costs Designed for indexable inserts, the tool body enables rapid insert changes without regrinding, reducing downtime and per-part tooling cost compared with solid-carbide alternatives. The insert-based approach allows selective use of grades and coatings to match workpiece requirements while preserving the cutter body; this separation of geometry and cutting material supports a predictable cost-per-cut calculation. Compatibility with recognised insert manufacturers such as SECO simplifies procurement and ensures access to established insert grades for varied machining tasks. Quick setup, low spindle load and dependable supply A compact mass of 0.197 kg minimises additional spindle load and contributes to agile tool changes in automated tool magazines. The 90° cutting angle supports square-shoulder milling and straightforward indexing for versatile slotting and face-milling chores. Assembly and maintenance are straightforward thanks to the Torx screw interface (T8), which allows secure tightening with standard toolroom keys. For procurement and reliable stock handling, Metav Werkzeuge acts as a quality filter and logistics partner, supplying tools from an inventory engineered to support industry and craft with prompt, transparent order processing. For technical clarification, application matching or to secure reliable supply of the Teknik Cutting Tools S627TM, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: S627TM Manufacturer: Teknik Makina Weight: 0.197 kg SKU: S627TM Facts Shank diameter: 16 mm Effective cutting length: 45 mm Number of cutting edges: 2 Overall length: 120 mm Cutting angle: 90° Special features Torx screw: M2,5x5,5 Torx key: T8 Compatible insert manufacturer: SECO Insert-style indexable system FAQ Which insert types fit this cutter? The cutter accepts indexable inserts matched to its pocket design; the S627TM is specified for inserts supplied by recognised manufacturers such as SECO and is intended for indexable-insert milling systems. How is the insert secured in the cutter body? Inserts are fixed with a Torx screw (M2.5x5.5) tightened using a T8 key to ensure repeatable seating and secure clamp force for stable machining with the S627TM. What clamping diameter is required for this tool? A tool holder that accepts a 16 mm shank is required; the Ø16 mm shank provides the necessary rigidity for the cutter’s intended applications. Is the cutter suitable for shoulder milling and slotting? Yes, the 90° cutting angle and double-flute configuration make the cutter suitable for square-shoulder milling as well as slotting operations where indexable inserts are appropriate. How does the S627TM support reduced tool costs? By separating the cutter body from the consumable insert, the S627TM allows economical replacement of cutting edges only, enabling selective use of insert grades for different materials and lowering overall tooling expenditure per part. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Shank Milling Cutter For APXT 1003 Indexable Inserts, 2 Flutes, 40mm Cutting Length - Teknik Makina
High-precision milling performance achieved through a 16 mm shank and 40 mm effective cutting length, compatible with APXT 1003 indexable inserts; order via Metav Werkzeuge or consult our team for application advice. Shank cutter S162TM — Insert milling cutter for APXT 1003, 16 mm shank by Teknik Makina A compact Shank cutter S162TM designed for indexable-insert milling in versatile CNC and manual machining applications, offering secure clamping and reliable insert seating. *16 mm shank diameter for secure clamping *40 mm effective cutting length *Compatible with APXT 1003 indexable inserts *Two cutting edges for efficient removal *120 mm overall length for deep milling Precise clamping and predictable tool behaviour for repeatable parts The combination of a 16 mm shank and defined geometry gives the tool consistent rigidity and repeatable run-out, which is essential when milling under tight tolerances. With two cutting edges and a 90° cutting angle, the design reduces vibration and enables steady material removal rates. This results in a predictable surface finish and extended insert life, translating into lower process variability and less rework in serial production. The robust connection between holder and spindle supports stable feeds and speeds, improving cycle-time reliability on production machines. Compatibility and secure insert fixation that simplifies tooling logistics Engineered to accept APXT 1003 indexable inserts (Korloy-compatible), the cutter uses a Torx M2.5×5.5 securing screw and T8 key for fast, repeatable insert changes. The 40 mm cutting length and 120 mm overall length allow safe access to deeper features while maintaining cut stability. Clear indexability of the insert type makes inventory management straightforward: keep a stock of matching APXT 1003 inserts and the holder, and changeovers are quick. Where quick turnaround and low downtime matter, this format supports efficient workflows and helps maintain throughput. Integrates with workshop workflows and reduces supplier complexity Lightweight at approximately 0.185 kg, the holder is easy to handle for set-up and balancing. The S162TM is identified by SKU S162TM for simple reordering and tool management within tool cabinets and CAM tool libraries. Procuring this tool via Metav Werkzeuge benefits from a central European distribution hub and quality filtering carried out in Emmerich, which helps ensure steady supply and conformity for production use. For teams consolidating suppliers, the compatibility with Korloy APXT 1003 inserts and clear specification reduces the need for multiple holder variants and simplifies purchasing decisions. For reliable compatibility with APXT 1003 indexable inserts and to secure stock from our European distribution, contact Metav Werkzeuge for ordering and technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S162TM Brand: Teknik Makina Description: Shank cutter for APXT 1003 indexable inserts SKU: S162TM Facts Shank diameter: 16 mm Effective cutting length: 40 mm Overall length: 120 mm Number of cutting edges: 2 Cutting angle: 90° Weight: 0.185 kg ECLASS: 21180806 ETIM: EC011860 Special features Compatible insert type: APXT 1003 Compatible insert manufacturer: Korloy Securing screw: Torx M2.5x5.5 Required key size: T8 Suitable for CNC and general milling operations Files available: 62de7eecbd24461b3d5f7a7d, 62de7e5c0f56dbb4de4dbf0f FAQ What insert type does the cutter accept? The holder accepts APXT 1003 indexable inserts; it is configured for Korloy-style APXT 1003 inserts and their seating geometry. How is the insert fixed in place? An M2.5×5.5 Torx screw secures the insert; the recommended key is T8, which ensures repeatable torque and stable seating. What shank size is required in the machine spindle or collet? The tool features a 16 mm shank diameter, so a matching 16 mm collet or holder is required for secure clamping. How deep can this cutter mill reliably? With a 40 mm effective cutting length and 120 mm overall length, the cutter is suitable for moderate-depth milling where the shank engagement and rigidity remain adequate. Is the S162TM suitable for automated tool change systems? Yes, the S162TM format and defined shank make it compatible with automated tool-change workflows provided the machine accepts a 16 mm shank holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm Shank Milling Cutter For P32 Indexable Inserts, 46mm Cutting Length - Teknik Makina
Take advantage of a compact, modular holder that combines quick insert changes with stable clamping for uninterrupted production. With a 16 mm shank and 46 mm cutting length, this tool reduces downtime and fits standard P32 indexable inserts; order directly via Metav Werkzeuge or consult our specialists for application advice. Shaft Milling Cutter S376TM — 16 mm shank, for P32 indexable inserts (Teknik Makina) A Shaft Milling Cutter S376TM engineered as a robust indexable toolholder for versatile face and peripheral milling with P32 inserts 16 mm shank diameter Compatible with P32 indexable inserts M5 Torx screw; T20 Torx key included Overall length 175 mm Stable, modular design for continuous milling efficiency The S376TM is presented as a shank milling cutter that prioritises uptime through a modular insert system. The use of P32 indexable inserts means that worn cutting edges can be replaced instantly, which shortens maintenance intervals and keeps machines productive. A secure clamping arrangement, operated with the M5 Torx screw and the supplied T20 key, guarantees repeatable seating of the insert and reduces the risk of movement under load. This configuration translates technical reliability into measurable process stability on the shop floor. Clear compatibility and straightforward handling Equipment planners and operators benefit from the tool's straightforward interface: a 16 mm shank for standard collet or holder mounting and a 46 mm effective cutting length for access to tight workspaces. The holder is expressly listed as compatible with Walter P32-insert systems, simplifying procurement and tool rotation where Walter inserts are already in use. The assembly procedure—tighten the M5 screw with a T20 key—keeps changeover times low and does not require specialised tooling, supporting lean workshop routines and predictable setup times. Practical advantages for production-ready tool sets Lightweight at 0.27 kg and with an overall length of 175 mm, this milling cutter balances rigidity and manoeuvrability for medium-duty milling operations. The indexable design lowers running costs, since only inserts require replacement rather than an entire cutter body. For buyers seeking traceable, proven components, the combination of a standardised shank size and widely available P32 inserts simplifies inventory management and speeds up reaction to wear-related interventions, improving overall equipment effectiveness. For tailored technical advice on integrating the Teknik Cutting Tools S376TM into existing tool systems, contact Metav Werkzeuge for expert guidance and rapid delivery from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: S376TM Manufacturer: Teknik Makina Fits inserts: P32 16 Fits inserts manufacturer: Walter Torx screw: M5 Torx key: T20 Core measurements Shank diameter: 16 mm Cutting length: 46 mm Diameter: 16 mm Overall length: 175 mm Weight: 0.27 kg Features For P32 indexable inserts Compatible with Walter inserts M5 Torx clamping screw T20 Torx key supplied Shank milling cutter type FAQ What inserts does this cutter accept? The S376TM accepts P32 16 indexable inserts and is specified as compatible with Walter insert systems. How is the insert secured in the holder? Insert retention is by an M5 Torx screw, tightened with a T20 key; the S376TM is designed for repeatable seating and quick replacement. What are the key dimensions to check for machine compatibility? Relevant measurements are a 16 mm shank diameter, a 46 mm cutting length, and an overall length of 175 mm for the S376TM. Is the tool suitable for quick changeover strategies? Yes; the indexable concept and standard Torx clamping enable fast changeovers, reducing downtime compared with solid cutters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Shank Milling Cutter for RDMW 0702 Indexable Inserts, 2 Flutes 40mm Cutting Length - Teknik Makina
Take advantage of the combination of stable clamping, quick insert changes and compact design to keep CNC cycles reliable and cost-efficient; order directly via Metav Werkzeuge or consult the team for application support. Shaft milling cutter R138TM – 16 mm shank, for RDMW 0702 indexable inserts (Teknik Makina) The Shaft milling cutter R138TM is an indexable-insert milling body engineered for precision metalcutting on CNC machines, optimised for use with RDMW 0702 inserts in medium-to-high productivity operations 16 mm shank diameter for rigid clamping Compatible with RDMW 0702 indexable inserts Torx M2.5x5.5 fixing screw, T8 key required Two cutting edges with 40 mm cutting length Increased machining stability for consistent cycle times The R138TM's compact shank diameter of 16 mm and optimised body geometry deliver enhanced rigidity, making the tool suited to stable milling passes and predictable surface results. Fitted with two effective cutting edges, the design reduces vibration and supports steady feeds, which in turn improves tool life and repeatability on serial components. This configuration benefits production environments where consistent cycle times and reduced rework are priorities. Low downtime through indexable-insert compatibility This milling body is designed for quick servicing: it accepts RDMW 0702 indexable inserts and secures them with a M2.5x5.5 Torx screw, operated with a T8 key, enabling fast on-machine changes. The use of standardised inserts minimises inventory complexity and makes replacement straightforward, translating into measurable reductions in maintenance time. Compatibility with Taegutec inserts ensures access to widely available grades for different application demands. Practical handling and integration into CNC workflows With an overall length of 120 mm and a cutting length of 40 mm, the tool balances accessibility and reach while keeping overhang modest for better dynamic behaviour. The body weighs 0.148 kg, which aids in stable toolholding and reduced spindle load during high-speed operations. Intended as a precision milling solution, the cutter is suitable for integration into existing tool libraries and fixture setups; correct clamping and matching spindle interfaces remain essential for achieving the specified performance. For tailored advice on Teknik Makina milling solutions and fast supply from Emmerich, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: R138TM Manufacturer: Teknik Makina Product: Shaft milling cutter for RDMW 0702 indexable inserts Compatible insert type: RDMW 0702 Compatible insert manufacturer: Taegutec Facts Shank diameter: 16 mm Cutting length: 40 mm Number of cutting edges: 2 Overall length: 120 mm Diameter: 16 mm Weight: 0.148 kg Special features Fixing screw: M2.5x5.5 Torx Torx key: T8 Indexable-insert system for quick replacement FAQ What inserts fit this milling body? The shaft milling cutter R138TM is built for RDMW 0702 indexable inserts and is compatible with grades offered by Taegutec. How are the inserts secured? Inserts are retained by an M2.5x5.5 Torx screw; use a T8 Torx key for insertion and removal. Is the tool suitable for high-speed milling? The R138TM's compact design and 16 mm shank support stable clamping; performance at high speeds depends on machine capability and chosen insert grade. What length and reach does the cutter offer? The tool has an overall length of 120 mm and a cutting length of 40 mm, providing a balance between reach and stiffness. How heavy is the milling body and why does that matter? The body weighs 0.148 kg, which contributes to reduced spindle load and improved dynamic stability when correctly clamped. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Shank Milling Cutter for WNMX 0603 Indexable Inserts L150mm Internal Coolant - Teknik Makina
Take advantage of robust indexable milling with precise coolant delivery: the combination of a 16 mm shank and integrated internal coolant delivers stable chip control and consistent surface quality. Order the tool directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Shank milling cutter — 16 mm shank, internal coolant (Teknik Makina) A shank milling cutter engineered for WNMX 0603 indexable inserts, offering secure clamping and reliable chip evacuation for industrial milling tasks. 16 mm shank diameter Integrated internal coolant channel For WNMX 0603 indexable inserts Secure clamping with T8 torx screw Increase throughput with controlled coolant delivery The tool body is built around an internal coolant channel that directs cutting fluid close to the cutting zone, improving chip evacuation and reducing heat at the edge. Combined with the 16 mm shank, this configuration raises process stability and reduces vibration, which in turn helps maintain tool life and part accuracy. The two cutting edges provide efficient material removal with a balanced load per insert, meaning fewer interruptions for rework and a more predictable production rhythm. Simple insert handling and proven compatibility Designed specifically for WNMX 0603 indexable inserts, the cutter accepts inserts from recognised manufacturers such as Korloy, ensuring availability and interchangeability. Insert retention relies on a T8 torx interface and M2.5x6.5 fastening screws, both common in workshop practice; this means insert changes are straightforward and repeatable. For operations new to indexable milling, the modular concept separates wear parts from the cutter body, so maintenance is limited to periodic insert replacement rather than full-tool changeover. Workshop-ready dimensions and ergonomic handling With a 150 mm total length and a 40 mm cutting length, the tool offers a good reach for a range of slotting and peripheral milling tasks while keeping overhang manageable. The modest mass (approx. 0.241 kg) makes mounting and balancing easier, and the robust shank geometry supports secure clamping in standard holders. For manufacturers seeking to integrate a reliable indexable cutter into an existing machining cell, this design reduces setup time and supports repeatable results under varying cutting conditions. Contact Metav Werkzeuge for tailored technical advice on the Teknik Makina shank milling cutter S898-1TM and guidance on insert selection and process parameters Technical data SKU: S898-1TM Product type: Shank milling cutter Manufacturer: Teknik Makina UID: S898-1TM Facts Shank diameter: 16 mm Total length: 150 mm Cutting length: 40 mm Number of cutting edges: 2 Weight: 0.241 kg Special features Internal coolant: yes Compatible inserts: WNMX 0603 Suitable for inserts by: Korloy Torx key: T8 Torx screw: M2.5x6.5 FAQ Is this cutter compatible with WNMX 0603 inserts? Yes. The cutter is designed specifically for WNMX 0603 indexable inserts and secures them with the specified torx screw system. Can Korloy inserts be used with this tool? Yes. The shank milling cutter is compatible with Korloy WNMX 0603 inserts, allowing access to a wide range of grades and geometries. What are the key dimensions to check for machine integration? The tool has a 16 mm shank diameter, a total length of 150 mm and a 40 mm cutting length, which are the primary dimensions to consider for holder fit and reach. How is coolant supplied to the cutting zone? Coolant is supplied through an internal channel that directs fluid to the cutting edge for improved chip control and temperature management. Which fasteners and keys are required for insert changes? Insert clamping uses a T8 torx interface with M2.5x6.5 screws for secure and repeatable attachment. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Shell Mill For LNMT 0804 Indexable Inserts, 2 Flutes 40mm Cutting Length, Ø16mm Shank - Teknik Makina
Take advantage of a compact, robust milling solution that combines a 16 mm shank with a 40 mm cutting length for reliable, repeatable results; procure the S298TM via Metav Werkzeuge or consult the technical team for application-specific advice. Shaft mill S298TM – 16 mm shank, for LNMT 0804 indexable inserts (Teknik Makina) The Shaft mill S298TM is a shank-mounted milling cutter engineered for use with LNMT 0804 indexable inserts, delivering stable performance for workshop and production milling tasks. *16 mm shank diameter *40 mm cutting length *Compatible with LNMT 0804 inserts *Two cutting edges for efficient chip control Stable clamping for reduced vibration and consistent geometry The solid 16 mm shank combined with a 120 mm overall length provides a compact yet rigid tool body that reduces runout and vibration during machining. This mechanical stability translates directly into high stability at the cutter interface, which helps maintain part tolerances and prolongs insert life. For operations where repeatability matters, the shank design supports reliable positioning in standard toolholders and quick change systems. Productive cutting with controlled chip evacuation Equipped with two cutting edges and a 40 mm cutting length, the tool supports efficient material removal with focused chip flow. The indexable insert system using LNMT 0804 inserts allows predictable cutting behaviour and straightforward edge changes, lowering per-cut costs compared with solid-carbide tools. The geometry is optimised for consistent chip formation, which reduces rework and improves cycle-time predictability in series production. Fast insert changes and secure fastening to minimise downtime Insert retention is effected via an M2.5x7 Torx screw that is accessed with a T8 key, enabling fast, secure replacement of the cutting edges. The straightforward fastening method ensures minimal tool-change time and safe clamping force for repeatable seating of the inserts. Compatibility with common insert suppliers such as ISCAR makes sourcing replacement inserts and wear parts uncomplicated for maintenance teams. Practical scope and sourcing advantage for workshops Designed for general milling tasks where indexable inserts are preferred, the cutter is suitable for standard workshop and light industrial applications that demand a balance of serviceability and machining efficiency. Its modest mass and concise dimensions suit retrofit into existing fleets of toolholders without major process changes, while the indexable concept supports cost management through economical edge changes and reduced scrap rates. Contact Metav Werkzeuge for tailored procurement or application support for the S298TM shaft mill; reach the team in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: S298TM Manufacturer: Teknik Makina Designation: Shaft mill for LNMT 0804 indexable inserts Dimensions & core data Shank diameter: 16 mm Cutting length: 40 mm Overall length: 120 mm Diameter: 16 mm Number of cutting edges: 2 Weight: 0.206 kg Torx screw: M2.5x7 Materials & special features Compatible with LNMT 0804 indexable inserts Compatible insert manufacturer: ISCAR Torx key: T8 Shank-mounted milling cutter SKU identifier: S298TM FAQ Which inserts fit this cutter? The cutter accepts LNMT 0804 indexable inserts; inserts from ISCAR marked LNMT 0804 are compatible with this holder. What is the shank diameter and overall length? The tool has a 16 mm shank and a 120 mm overall length, offering a compact, rigid profile for stable milling. How many cutting edges does the tool have and what is the cutting length? The holder uses two cutting edges and gives a 40 mm cutting length, optimised for efficient chip evacuation. How are the inserts secured and what tools are required? Inserts are secured with an M2.5x7 Torx screw; a T8 key is used for fastening and replacement, enabling quick maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Solid Carbide Cutter For LOGU 0303 Indexable Inserts, M3x6 Clamp Screw - Teknik Makina
Benefit from secure toolholding and proven compatibility with LOGU 0303 indexable inserts combined with a 16 mm shank and 150 mm overall length for stable, repeatable milling. Order directly via Metav Werkzeuge or consult their specialists for application-specific recommendations. Shank Milling Cutter S677TM – indexable-insert design, 16 mm shank (Teknik Makina) A Shank Milling Cutter S677TM designed for milling operations with LOGU 0303 indexable inserts, offering reliable clamping and extended reach for pocketing and slotting tasks in workshop and production settings Compatible with LOGU 0303 indexable inserts 16 mm shank for secure tool holding Overall length 150 mm for deep reach Torx M3x6 clamping screw, T8 key Consistent machining through rigid shank design The tool combines a 16 mm shank with a 150 mm overall length to provide a stable setup that reduces vibration and improves surface finish. The solid shank diameter ensures reliable clamping in standard toolholders and collets, which translates directly into repeatable results and fewer reworks. With two cutting edges the cutter balances material removal rate and load, enabling efficient passes while keeping spindle loads predictable. This stability benefits batch production by reducing tool-change frequency and maintaining part tolerances. Fast setup and simple insert management Configured for LOGU 0303 indexable inserts, the cutter simplifies inventory management by using a common insert family. The clamping system uses a Torx M3x6 screw secured with a T8 key, allowing quick insert changes and minimal downtime. Clear mechanical interfaces reduce setup time on the machine and make the tool compatible with Kyocera-manufactured inserts, which are widely available. The result is a lower administrative burden for tooling stocks and faster restart after maintenance. Application-focused performance for workshop demands Designed for light-to-medium milling operations, the cutter offers an effective compromise between reach and rigidity. The modest number of cutting edges supports stable chip evacuation and controlled cutting forces, which is beneficial when working in slots or internal pockets. Where access is limited, the 150 mm overall length gives the necessary reach without excessive overhang. This means predictable cycle times and a pragmatic way to increase throughput in small-series production. Practical maintenance and shop-floor reliability Maintenance requires only standard workshop tools: the specified Torx T8 key and a replacement M3x6 screw are the only routine items needed. The indexable-insert concept allows worn cutting edges to be renewed quickly, avoiding the need for complete tool replacement and lowering overall tooling cost per part. For production planners this translates into straightforward spare-parts lists and reduced machine downtime, reinforcing the tool’s suitability for both craft and industrial environments. Contact Metav Werkzeuge for tailored advice on the Teknik Makina S677TM and assistance with ordering — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number / SKU: S677TM Manufacturer: Teknik Makina Product designation: Shank Milling Cutter for LOGU 0303 Indexable Inserts ECLASS: 21180806 ETIM: EC011860 Core measurements Shank diameter (mm): 16 Diameter (mm): 16 Overall length (mm): 150 Cutting edges: 2 Design & compatibility Compatible inserts: LOGU 0303 Compatible insert manufacturer: Kyocera Torx clamping screw: M3x6 Torx key size: T8 FAQ Which inserts fit this cutter? The cutter is built for LOGU 0303 indexable inserts; Kyocera LOGU 0303 inserts are listed as compatible for the Shank Milling Cutter S677TM. What size is the shank and how does it affect clamping? The shank diameter is 16 mm, which provides secure toolholding and compatibility with standard 16 mm collets or holders for reliable machining with the S677TM. How many cutting edges does the tool have? This shank cutter features 2 cutting edges, a design that helps balance cutting performance and chip evacuation for stable slotting and pocketing operations. Which screw and key are required for insert clamping? Insert clamping uses a Torx M3x6 screw that is tightened with a T8 key; keeping these on hand enables rapid insert changes for the S677TM. Is the tool suitable for deep internal machining? With an overall length of 150 mm, the tool offers extended reach for deeper pockets and internal features while maintaining reasonable rigidity for workshop milling tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Solid Carbide End Mill For 4NKT 06 Indexable Inserts With Internal Coolant, L120mm - Teknik Makina
Take advantage of the combination of reliable compatibility with Taegutec 4NKT 06 indexable inserts, internal coolant and a compact 16 mm shank for stable, high-efficiency milling — order directly via Metav Werkzeuge or consult our specialists for application advice. End Mill S471-2TM – 16 mm shank, internal coolant (Teknik Makina) An End Mill S471-2TM engineered for secure clamping and effective chip control when using 4NKT 06 indexable inserts, suitable for production and workshop milling tasks. 16 mm shank with 25 mm cutting length Internal coolant supply Compatible with 4NKT 06 Taegutec inserts Two-cutting-edge configuration Higher throughput and longer insert life through controlled cooling The integrated internal coolant channel ensures coolant reaches the cutting edge directly, improving chip evacuation and reducing thermal stress on the insert. This targeted fluid delivery helps to maintain consistent cutting conditions at higher cutting speeds, which translates into longer insert life and fewer interruptions for tool change. For operations where steady cycle times matter, the controlled cooling reduces variability and supports predictable throughput. Stable clamping and improved surface finish from a compact shank With a 16 mm shank and a modest overall length, the tool offers a favourable stiffness-to-length ratio that minimises vibration and run-out. The result is a more consistent surface quality and repeatable dimensional accuracy in milling operations. The compact design reduces deflection during deeper cuts and provides the rigidity required for both slotting and face-milling tasks in constrained set-ups. Fast insert changes and low-maintenance upkeep for production environments The cutter accepts 4NKT 06 indexable inserts from Taegutec, enabling quick insert rotation or replacement to restore cutting performance without the need to replace the whole tool body. Fixing and maintenance are simplified by the supplied fasteners: a Torx T8 key interface and M3×6.2 Torx screws provide secure seating and straightforward reassembly. The two-cutting-edge layout balances load and reduces cutting forces, helping to preserve both the insert geometry and the toolholder. Built for consistent workshop and light-production use Engineered for frequent use, the tool balances practicality and performance: a 120 mm overall length and 25 mm cutting length permit effective reach while maintaining rigidity, and the moderate weight supports rapid handling at changeover. Supplied by Teknik Makina and available via Metav Werkzeuge, this cutter integrates into established tool cycles and benefits from a distribution partner experienced in precision tooling and dependable supply chains. For reliable milling performance with Teknik Makina tooling and targeted internal-coolant advantages, contact Metav Werkzeuge for product availability and application guidance from our Emmerich team. Technical data Article number: S471-2TM Manufacturer: Teknik Makina Product type: End mill ECLASS: 21180806 Facts Diameter: 16 mm Overall length: 120 mm Shank diameter: 16 mm Cutting length: 25 mm Weight: 0.2 kg Number of cutting edges: 2 Special features Internal coolant Compatible with 4NKT 06 indexable inserts Compatible insert brand: Taegutec Torx key: T8 Torx screw: M3×6.2 FAQ Which insert type fits this tool? The cutter is designed for 4NKT 06 indexable inserts, compatible with inserts from Taegutec. Does the tool feature internal coolant? Yes, the tool incorporates internal coolant to direct fluid to the cutting zone and improve chip evacuation. What are the key dimensions for clamping and reach? The tool has a 16 mm shank, a 25 mm cutting length and an overall length of 120 mm, offering a compact, rigid mounting. How many cutting edges does the cutter have? The cutter is configured with two cutting edges, providing balanced cutting forces and stable performance. What is the article number for ordering or reference? The SKU for reference is S471-2TM and the tool is supplied by Teknik Makina Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Solid Carbide End Mill for APXT 1003 Indexable Inserts, 2 Flutes 90° Cutting Angle, 30mm Cutting Length - Teknik Makina
The combination of a compact shank and secure insert clamping makes this cutter a practical choice for high-repeatability milling in small to medium machining centres; its compatibility with APXT 1003 indexable inserts reduces tool-change time and tooling costs. Order the tool directly via Metav Werkzeuge or consult the technical team for configuration advice. S140TM shank cutter — 16 mm shank, 90° cutting angle by Teknik Makina the S140TM is a shank cutter designed for face and peripheral milling with indexable inserts, primarily for light to medium-duty industrial applications Compact 16 mm shank for tight toolholders 30 mm cutting length for deep engagement Holds APXT 1003 indexable inserts by Korloy Supplied with M2.5x5.5 Torx screw and T8 key Consistent chip control and production repeatability The tool is built to deliver stable machining results when paired with APXT 1003 indexable inserts. By using a dedicated insert interface, the cutter enables predictable chip evacuation and consistent flank contact, which together support reduced rework rates and stable tolerances in serial production. The combination of a 16 mm shank and a 90° cutting angle provides a compact footprint while maintaining effective cutting geometry for facing and light shoulder milling. The modular nature of the insert system also simplifies replacement: worn edges are swapped quickly without regrinding, which shortens downtime and keeps cycle times low. Secure clamping and straightforward maintenance Clamping is achieved using the supplied M2.5x5.5 Torx screw actuated with a T8 key, ensuring the insert pocket is fastened with consistent torque for repeatable seating. This reduces the likelihood of insert movement under load and supports improved tool life through uniform seat pressure. The cutter’s 30 mm cutting length offers enough engagement for many through-cut and slotting operations without excessive cantilever, helping to limit vibration. Routine maintenance is straightforward: inspection of the insert seat and screw before each shift guarantees secure retention and predictable machining behaviour. Practical fit for mixed-workshop environments Designed for compatibility with Korloy and other suppliers of APXT 1003-format inserts, the shank cutter suits workshops that prioritise flexibility and quick tooling changes. The small 16 mm diameter makes it suitable for compact toolholders and spindle configurations commonly found in CNC machining centres and smaller vertical mills. For purchasing and inventory management, the standardised insert format reduces the number of distinct spare parts required, which supports lean stock practices. The S140TM’s modest weight and compact form also make it easy to handle during set-up and toolroom checks. For ordering or technical assistance with the Teknik Makina S140TM shank cutter, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 — the Metav team can advise on compatible inserts and toolholder selection Technical data Article number: S140TM Manufacturer: Teknik Makina Product name: S140TM shank cutter For indexable inserts: APXT 1003 Compatible insert brand: Korloy Facts Shank diameter: 16 mm Cutting length: 30 mm Diameter: 16 mm Number of cutting edges: 2 Overall length: 100 mm Weight: 0.156 kg Cutting angle: 90° Special features Supplied screw: M2.5x5.5 Torx Required key: T8 eClass: 21180806 ETIM: EC011860 Files: ID 62de7eecbd24461b3d5f7a7d, 62de7e5c0f56dbb4de4dbf0f FAQ What insert format does the cutter accept? The cutter accepts APXT 1003 indexable inserts; the S140TM is specified for that insert format and is compatible with Korloy APXT 1003 plates. Which screw and key are required for insert clamping? Insert clamping uses an M2.5x5.5 Torx screw, tightened with a T8 key as supplied with the S140TM shank cutter. Is the S140TM suitable for compact toolholders? Yes — the 16 mm shank diameter is intended for smaller toolholders and compact spindle configurations commonly used in machining centres. How many cutting edges does the cutter have and what does that mean? The cutter has 2 cutting edges, which balances material removal rate and stability; two edges provide efficient cutting with predictable load distribution for light to medium milling tasks. Can the S140TM be used with other APXT 1003 insert manufacturers? Yes — the S140TM is designed for the APXT 1003 insert geometry and can be used with any insert brand that conforms to that format, including Korloy. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Solid Carbide End Mill for BDMT 11T3 Indexable Inserts Internal Coolant, 2 Flutes, 45mm Cutting Length - Teknik Makina
Take advantage of a compact, high-precision milling solution that combines a 16 mm shank, internal coolant and compatibility with BDMT 11T3 indexable inserts for consistent production results; order directly via Metav Werkzeuge or consult our specialists for application advice. Shank milling cutter S565-1TM — 16 mm shank, internal coolant (Teknik Makina) The Shank milling cutter S565-1TM is a CNC-compatible indexable milling tool designed for use with BDMT 11T3 inserts and Kyocera-compatible plates, offering a compact overall length and integrated coolant supply for stable chip evacuation. 16 mm precision shank Internal coolant channel Compatible with BDMT 11T3 inserts Torx T8 fastening system Reliable productivity through indexable tooling This indexable milling solution is engineered for predictable cycle times and low tool-change overhead. Fitted for BDMT 11T3 inserts, the cutter allows rapid re-indexing of cutting edges, reducing downtime compared with solid-tool regrinds. The combination of a 16 mm shank and a balanced design maintains runout control on many tool holders, which helps to protect spindle bearings and improves part-to-part repeatability in serial production. Secure clamping and coolant for consistent cutting conditions Secure retention is provided by the Torx fixing mechanism; the Torx T8 drive and the matching M2.5x5.5 screw ensure a tight, reproducible fit for every insert change. The integrated internal coolant directs lubricant and coolant to the cutting zone, enhancing chip control and thermal stability. With a cutting length 45 mm and 150 mm overall length, the tool gives a useful reach for medium-depth milling while preserving stiffness and surface finish. Compact design with clearly defined specifications A two-flute geometry provides effective chip evacuation while keeping cutting forces manageable; the tool has 2 cutting edges and a total weight of 0.232 kg for easy handling and balanced performance. The shank diameter of 16 mm is a common standard that simplifies adapter and holder selection. Compatibility with Kyocera production inserts means replacement parts are readily available, supporting uninterrupted workflows. Contact Metav Werkzeuge for tailored application support and ordering of the Teknik Makina S565-1TM — our consultants assist with holder selection and machining parameters from Emmerich to your workbench Technical data SKU: S565-1TM Product type: Shank milling cutter Manufacturer: Teknik Cutting Tools Facts Diameter: 16 mm Overall length: 150 mm Shank diameter: 16 mm Cutting length: 45 mm Weight: 0.232 kg Cutting edges: 2 Special features Internal coolant Compatible with BDMT 11T3 inserts Compatible insert manufacturer: Kyocera Torx key: T8 Torx screw: M2.5x5.5 FAQ Which inserts fit this cutter? The cutter accepts BDMT 11T3 indexable inserts; the tool is designed for Kyocera-compatible plates and simple re-indexing. Is the coolant delivered through the tool? Yes, the tool has an internal coolant channel to supply coolant directly to the cutting zone for improved chip evacuation. What are the key dimensional limits to check for a setup? Important dimensions are 16 mm diameter (shank), 45 mm cutting length and 150 mm overall length; these determine holder compatibility and reach. How is the insert secured? Inserts are clamped using a Torx screw system (driver T8) with screw specification M2.5x5.5 for repeatable retention. Can the S565-1TM be used on standard 16 mm holders? Yes, the S565-1TM has a 16 mm shank designed to fit conventional 16 mm toolholders that match the machine's clamping system. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Solid Carbide End Mill For R390 11T3 Indexable Inserts With Internal Cooling, 150mm - Teknik Makina
Benefit from stable clamping and efficient chip evacuation thanks to the 16 mm shank and internal coolant, combined with compatibility with R390 11T3 indexable inserts for rapid insert changes; order the indexable insert shank cutter (SKU S593-2TM) directly via Metav Werkzeuge or consult our specialists for application support. Indexable insert shank cutter for R390 11T3 — 16 mm shank, internal coolant (Teknik Makina) The Indexable insert shank cutter for R390 11T3 is a coolant-fed milling body designed for secure clamping in standard 16 mm tool holders and for fast insert replacement in production environments. 16 mm shank diameter for stable clamping Internal coolant for improved chip evacuation Compatible with R390 11T3 indexable inserts Torx T8 fixing with M2.5x5.5 screw Coolant-fed design for consistent cutting performance The integrated internal coolant channels direct cutting fluid precisely to the cutting edge, improving chip evacuation and reducing heat at the insert edge. This controlled cooling helps to maintain edge geometry for longer, which translates into more consistent surface finish and longer service intervals for the cutter body. In practice, through‑tool coolant reduces built-up edge and supports higher metal removal rates in CNC milling cycles without compromising the life of the insert. Rigid 16 mm shank for repeatable set-ups A 16 mm shank diameter provides the mechanical stiffness required for stable milling, particularly when machining with indexable inserts. The larger shank reduces vibration and run-out in the spindle, which benefits both repeatability and tool life. For workshops seeking predictable results, the solid shank ensures secure seating in standard collets and tool holders, simplifying set-up and reducing the need for corrective rework. Indexable inserts and fast changeover for cost-effective machining Designed for use with R390 11T3 indexable inserts, this cutter body offers the economic advantage of replaceable cutting edges: worn inserts are changed quickly while the cutter body remains in service. The tool uses a Torx T8 fixing system and an M2.5x5.5 screw for secure and straightforward insert clamping. With two effective cutting edges and a low mass of 0.229 kg, the assembly supports both efficient roughing and controlled finishing operations on automated machining centres. For tailored advice on using the Teknik Makina indexable insert shank cutter or to confirm compatibility with specific insert grades and holders, contact Metav Werkzeuge for precise recommendations and order coordination Technical data SKU: S593-2TM Manufacturer: Teknik Makina Product type: Shank cutter Dimensions & weight Diameter: 16 mm Overall length: 150 mm Shank diameter: 16 mm Cutting length (shank): 40 mm Weight: 0.229 kg Number of cutting edges: 2 Features & compatibility Internal coolant Compatible with R390 11T3 indexable inserts Compatible insert manufacturer: Sandvik Torx key: T8 Fixing screw: M2.5x5.5 eClass: 21180806 FAQ How does the internal coolant work with this cutter? The internal coolant channels deliver cutting fluid directly to the insert edge; the indexable insert shank cutter (SKU S593-2TM) uses this feature to improve chip evacuation and reduce cutting temperatures. Which inserts fit this milling body? This cutter is compatible with R390 11T3 indexable inserts; it is also designed for use with inserts from Sandvik when the correct grade and geometry are selected. What fastening hardware is required for insert clamping? Insert clamping uses a Torx T8 drive and an M2.5x5.5 fixing screw as specified for the cutter body. What applications suit this tool body best? The tool body is intended for CNC milling operations where quick insert changes and coolant-fed cutting are required, offering efficiency for both roughing cycles and finishing passes. Which shank size and holders are required? A 16 mm shank holder or collet is required for correct clamping and minimal run‑out; secure, repeatable clamping improves surface quality and tool life. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah. 422 Nolu Sokak No: 9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm Solid Carbide End Mill For RPMW 0803 Indexable Inserts, M3x7 Torx Fixing - Teknik Makina
Benefit from secure Ø16 mm shank clamping, quick insert changes and compatibility with RPMW 0803 indexable inserts for steady production. Order the tool directly via Metav Werkzeuge or consult the specialist team for application support. Indexable milling cutter R310TM — Ø16 mm shank, for RPMW 0803 inserts (Teknik Makina) The Indexable milling cutter R310TM is a compact indexable tool designed for stable clamping and fast insert replacement in CNC milling applications, suitable for workshops seeking predictable machining cycles. Ø16 mm shank for stable clamping Compatible with RPMW 0803 inserts Two cutting edges for balanced cutting Torx M3x7 fastening, T8 key included Consistent accuracy through stable shank design The combination of a Ø16 mm shank and a compact overall form delivers improved clamping stability, which supports repeatable results on serial runs. With two cutting edges, the tool achieves a balanced cutting action that reduces vibration and improves surface consistency. In practice, indexable systems separate the cutting geometry from the holder: worn edges are replaced rather than the whole tool, which reduces tooling costs and shortens downtime. This makes the cutter a pragmatic choice where predictable cycle times and simplified logistics matter in the production process. Fast insert changes and secure fixation for less downtime Designed for RPMW 0803 indexable inserts, the holder uses a Torx M3x7 screw secured with a T8 key, providing a reliable mechanical clamp for each insert. The insert size reference (RPMW 0803) indicates a standard geometry that many insert manufacturers supply, enabling straightforward reordering. A robust fastening system keeps the insert seated under cutting forces, while the indexable principle allows rapid edge rotation or replacement, turning what would otherwise be maintenance time into a brief shop-floor task and ensuring machines return to operation sooner. Compact length and workshop flexibility With an overall length of 130 mm, the cutter is well suited to confined tool magazines and compact machining centres where tool projection must be managed. The moderate length helps control runout and deflection when used in properly rated toolholders, supporting better tool life and surface finish. The indexable approach also reduces the variety of complete tools that must be stocked: one holder plus a set of inserts covers multiple operations, simplifying procurement and storage for maintenance teams or purchasing departments. Practical handling and maintenance guidance Basic upkeep focuses on correct seating of the insert and periodic check of the Torx screw; the simple Torx interface means replacement requires only a T8 key, which is often retained in the tool cabinet to avoid delays. Visual inspection of the insert seat and screw before a shift helps prevent unset clamps and contributes to consistent process reliability. For higher-volume production, documenting the rotation interval and keeping a controlled insert inventory will help maintain throughput and reduce unexpected machine stops. For tailored recommendations or to discuss suitable insert grades and clamping options, contact Metav Werkzeuge for application support and parts availability via info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists can advise on the optimal setup for specific CNC workflows. Technical Data Article number: R310TM Manufacturer: Teknik Makina ECLASS: 21180806 ETIM: EC011860 Facts Shank diameter: 16 mm Diameter: 16 mm Overall length: 130 mm Cutting edges: 2 Special features For RPMW 0803 indexable inserts Compatible with Korloy inserts Torx screw: M3x7 Torx key: T8 FAQ What insert type fits this cutter best? The R310TM is designed for RPMW 0803 indexable inserts; matching the insert geometry ensures correct seating and cutting performance. Is a specific insert manufacturer recommended? The tool is compatible with inserts from Korloy; Teknik Makina supplies the holder, and Korloy inserts are a common, compatible choice for RPMW 0803 geometry. What size shank and overall length does the holder have? The holder features a 16 mm shank with an overall length of 130 mm, providing a balance between rigidity and accessibility in compact tool magazines. Which tools are required for insert changes? Insert fixation uses a Torx M3x7 screw and a T8 key, making insert replacement straightforward with standard workshop tools. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Solid Carbide End Mill for XNKU 06T3 Indexable Inserts Internal Coolant, 90mm Cutting Length - Teknik Makina
Take advantage of the combination of precise insert compatibility, internal coolant and a compact 16 mm shank to keep machining runs consistent and downtime low; order or request advice via Metav Werkzeuge for tailored integration into existing toolholders. 16 mm shank milling cutter S778-1TM — internal coolant, for XNKU 06T3 indexable inserts A 16 mm shank milling cutter S778-1TM engineered as a cutter body for XNKU 06T3 indexable inserts, providing internal coolant delivery and a 160 mm overall length for versatile milling tasks. Internal coolant for reliable chip evacuation Compatible with Palbit XNKU 06T3 indexable inserts 16 mm shank, 160 mm overall length Supplied with T8 Torx screws M2.5x5.5 Consistent insert performance through targeted cooling The cutter body is designed with an internal coolant channel that directs cutting fluid precisely to the cutting zone, reducing thermal load and helping to extend insert life. Combined with its 16 mm shank, the tool offers a stable connection to standard holders, which reduces run-out and vibration. Compatibility with the XNKU 06T3 family from Palbit ensures rapid insert changes and predictable cutting geometry, translating into reproducible surface finishes and fewer interruptions in production. Efficient material removal with low vibration With 2 cutting edges and a 90 mm cutting length, the tool balances metal removal rate and stability, making it suitable for slotting and light shoulder milling where insert-based systems are preferred. The cutter body’s geometry moderates radial and axial forces, which helps achieve consistent chip formation and lowers the likelihood of chatter. The 160 mm overall length provides reach without excessive overhang, aiding rigidity during deeper passes and improving process reliability. Workshop-friendly assembly and serviceability Fast, secure clamping is provided via the supplied Torx fasteners; use the T8 key and M2.5x5.5 screws for insert retention and replacement. The compact mass (approx. 0.218 kg) and standardised shank diameter make the body easy to handle during tool changes and to integrate into existing tool lists. For traceability and ordering, the cutter is listed under SKU S778-1TM, enabling straightforward stock management and quick replenishment when used in batch production. Ideal applications and professional fit This milling cutter body is suitable for CNC shops, tool rooms and production lines that rely on interchangeable insert systems for flexibility and cost efficiency. The insert-based approach minimises per-part tooling cost while allowing rapid adjustment of cutting geometry. Given its cooling provision and insert compatibility, the tool is particularly useful where controlled temperatures and short changeovers improve throughput and surface quality. For technical availability and selection support for the Teknik Cutting Tools cutter body, contact Metav Werkzeuge for expert advice and fast delivery — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S778-1TM Manufacturer: Teknik Makina Product type: Milling cutter (shank) Compatible inserts: XNKU 06T3 Internal coolant: Yes Core specifications Shank diameter: 16 mm Overall length: 160 mm Cutting length: 90 mm Number of cutting edges: 2 Weight: 0.218 kg Torx key: T8 Torx screw: M2.5x5.5 Materials & features Compatible insert manufacturer: Palbit SKU: S778-1TM ECLASS: 21180806 FAQ Which insert type fits this cutter body? The cutter body accepts XNKU 06T3 indexable inserts; compatibility is specified for Palbit-style inserts, enabling rapid replacement and consistent geometry. Does the tool provide coolant supply to the inserts? Yes, the body is equipped with internal coolant to deliver cutting fluid directly to the cutting edge, improving tool life and chip control. What shank size and lengths are specified? Shank diameter is 16 mm, overall length 160 mm and cutting length 90 mm; these dimensions suit standard 16 mm holders with reasonable reach and rigidity. How are inserts fastened and which tools are required? Inserts are secured with Torx screws M2.5x5.5; a T8 Torx key is recommended for secure and repeatable clamping. What is the SKU for ordering and stock purposes? The product is listed under SKU S778-1TM, which should be quoted for ordering and inventory tracking. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm Solid Cutter For APKT 0903 Indexable Inserts 90° Cutting Angle, 60mm Cutting Length - Teknik Makina
Take advantage of a compact, insert‑based milling solution that combines a 16 mm shank with a 60 mm cutting length for stable, repeatable machining; order the cutter directly via Metav Werkzeuge or consult the technical team for application advice. S216TM shank cutter – for APKT 0903 indexable inserts, 90° cut angle (Teknik Cutting Tools) The S216TM shank cutter is a shank-mounted milling tool designed for use with APKT 0903 indexable inserts, offering compact dimensions and a right‑angled cutting geometry for efficient shoulder and face milling in workshop and production environments For APKT 0903 indexable inserts 16 mm shank diameter 60 mm cutting length 90° cut angle for shoulder milling Torx screw M2.5x5.5, T8 key Predictable performance with insert-based machining The S216TM is engineered for indexable insert workflows, converting the repeatability of replaceable tips into measurable productivity gains. The combination of a 16 mm shank and a 60 mm cutting length gives a compact, rigid tool geometry that reduces deflection in short‑reach milling operations. A 90° cut angle produces true shoulder faces, which simplifies finishing passes and can lower cycle time by reducing the need for secondary operations. For manufacturers focused on predictable throughput, the tool’s dimensions support stable feeds and speeds in standard setups. fast insert changes and secure clamping to cut downtime Insert retention is solved with a Torx screw M2.5x5.5 that is driven with a T8 key, providing a secure, repeatable clamp for APKT pads. The small, robust fastening method makes indexable insert replacement quick and reliable, keeping maintenance time to a minimum. Compatibility with recognised insert suppliers such as Walter ensures widely available cutting grades and geometries, so tooling families can be standardised across the shop. Lightweight construction (approx. 0.34 kg) and balanced geometry assist in maintaining tool life and spindle load consistency. Compact versatility for workshop and production milling This shank-mounted cutter is suitable where a compact holder is required without sacrificing the benefits of indexable tooling. The two‑edge configuration gives an efficient cut pattern for light to medium material removal in general steel and similar workpieces when using appropriate APKT 0903 grades. The straightforward design eases tool management: spare inserts, fastening screws and a single key size streamline inventory and operator training. Supplied data such as shaft and overall lengths allow process planners to integrate the tool into fixture and tool‑changer layouts with confidence. For availability and specification checks for the Teknik Cutting Tools S216TM, contact Metav Werkzeuge for stock and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S216TM Manufacturer: Teknik Makina Designation: Schaftfräser Application: for APKT 0903 Indexable Inserts ECLASS: 21180806 ETIM: EC011860 Facts Shank diameter: 16 mm Cutting length: 60 mm Diameter: 16 mm Overall length: 200 mm Number of cutting edges: 2 Cut angle: 90° Weight: 0.34 kg Torx screw: M2,5x5,5 Torx key: T8 Special features Compatible with APKT 0903 indexable inserts Recommended insert brand: Walter Shank-mounted design for rigid clamping Two cutting edges for efficient material removal FAQ Which indexable inserts fit this cutter? The cutter accepts APKT 0903 indexable inserts; insert grades from Walter are suitable and commonly used with the S216TM. What are the key dimensions to check for machine integration? Important dimensions are the 16 mm shank, 60 mm cutting length and 200 mm overall length; these figures should be checked against toolholder clearance and tool‑changer capacity. How is the insert secured and what tool is required? Inserts are clamped with a Torx screw M2.5x5.5; a T8 key is used to tighten and release the screw. Is the S216TM suitable for shoulder and face milling? Yes. The 90° cut angle and two‑edge geometry make the tool appropriate for shoulder and light face milling tasks when paired with the correct APKT 0903 grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Solid End Mill for APKT 1003 Indexable Inserts Internal Coolant, 80mm Cutting Length - Teknik Makina
Benefit from a combination of efficient indexable-insert milling, internal coolant and a rigid 16 mm shank for consistent chip evacuation and prolonged tool life. Order the shank cutter directly via Metav Werkzeuge or ask our consultants if additional technical data is required. Shank cutter S766-2TM — 16 mm shank, internal coolant (Teknik Makina) The Shank cutter S766-2TM is an insert milling tool designed for economical and flexible metal removal with APKT 1003 indexable inserts across a range of workshop and light industrial milling tasks 16 mm shank diameter Internal coolant for tool cooling Compatible with APKT 1003 inserts Two cutting edges for efficient milling Faster material removal with indexable inserts and low tooling cost The design accepts APKT 1003 indexable inserts, a common and economical choice for many milling operations. Using replaceable indexable inserts reduces tooling cost per part since only the insert is replaced when worn; the body remains in service. The two cutting edges enable stable engagement and efficient chip sectioning, which contributes to higher metal removal rates and predictable cycle times. This approach suits production runs where rapid insert changes and consistent cutting forces matter. Controlled cooling and improved tool life for demanding passes Equipped with internal coolant, the cutter directs coolant close to the cutting zone to improve heat dissipation and chip flushing. Cooler cutting temperatures reduce insert wear and help maintain edge integrity over longer periods, which increases process reliability. The internal coolant feature is particularly beneficial when machining alloys or performing interrupted cuts where heat buildup and chip evacuation influence surface finish and dimensional stability. Rigid dimensions for repeatable setups and stable machining With a 16 mm shank, an overall length of 150 mm and an 80 mm cutting length, the tool balances reach and stiffness for many workshop setups. The defined shank diameter and length support repeatable clamping and reduced deflection, which is essential when maintaining tight tolerances. The documented weight of 0.121 kg contributes to predictable toolholder dynamics and makes balancing straightforward in small- to medium-sized milling machines. Simple maintenance and secure insert fastening for uninterrupted work Insert retention uses an accessible Torx system with a T8 key and M2.5x5.5 Torx screw, allowing quick insert changes and secure clamping. The compatibility with Palbit-manufactured inserts ensures broad availability of grades and geometries for different materials. Routine service is straightforward: clean coolant passages, inspect seats, and replace inserts as needed to keep the cutter delivering consistent performance. For application-specific recommendations and grade selection, Metav’s consultants are available to advise on the optimal insert and coolant strategy. For detailed application guidance or supply from stock, contact Metav Werkzeuge for tailored advice and efficient delivery from Emmerich. Technical data SKU: S766-2TM Manufacturer: Teknik Cutting Tools / Teknik Makina Product type: Shank cutter Compatible inserts: APKT 1003 Compatible insert manufacturer: Palbit Core data Diameter: 16 mm Overall length: 150 mm Shank diameter: 16 mm Cutting length: 80 mm Cutting edges: 2 Weight: 0.121 kg Torx screw: M2.5x5.5 Torx key: T8 Special features Internal coolant For APKT 1003 indexable inserts Compatibility with Palbit inserts Insert-retained milling design FAQ Is the cutter compatible with APKT 1003 inserts? Yes. The S766-2TM is designed specifically for APKT 1003 indexable inserts and accepts inserts from Palbit as specified by the tool design. Does the tool provide internal coolant supply? Yes. The cutter features internal coolant, which improves cooling at the cutting edge and aids chip evacuation during milling. What are the shank and overall dimensions? The tool has a 16 mm shank diameter, an overall length of 150 mm and an 80 mm cutting length as stated for the S766-2TM. How are inserts fastened and changed? Inserts are secured with a Torx screw (size M2.5x5.5) using a T8 Torx key, enabling fast and secure insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Solid End Mill for APMT 0602 Indexable Inserts Internal Cooling, 4 Flutes - Teknik Makina
Combine rigid clamping and controlled cooling for consistent milling results with indexable inserts; the tool pairs a 16 mm shank with internal coolant and a 25 mm effective cutting length. Order the shank milling cutter directly via Metav Werkzeuge or ask our consultants if needed. Shank milling cutter for APMT 0602 indexable inserts — internal coolant, 16 mm shank (Teknik Makina) The Shank milling cutter for APMT 0602 indexable inserts provides stable, insert-based milling for general workshop and light industrial applications in a compact L90 mm design. 16 mm shank for rigid clamping Internal coolant for effective cooling Compatible with APMT 0602 Korloy inserts L90 mm total length, 25 mm cutting length Consistent cutting performance with indexable inserts The cutter is built for reliable machining of parts where repeatability matters. By accepting APMT 0602 inserts from Korloy, the tool enables quick index changes and predictable cutting geometry. The integrated internal coolant supplies lubricant and cooling directly to the cutting zone, which improves chip evacuation and reduces thermal load on the insert. The 16 mm shank ensures secure clamping in common toolholders, limiting run-out and vibration for a steadier surface finish and fewer rejected parts. Reduced downtime through easy insert maintenance Maintenance and on-machine service are straightforward thanks to the simple fixing concept. The design uses a Torx retention system; the required key is T6 and the insert screw specification is M1.8×4.1, allowing fast replacement cycles with standard workshop tools. With four cutting edges available per head and a 25 mm cutting length, the tool is suitable for medium-depth milling tasks while supporting predictable index intervals. The compact L90 mm overall length balances accessibility and rigidity to keep changeovers brief and tool life consistent. Seamless integration into production workflows This tooling solution is practical for mixed-production environments that favour insert systems for flexibility. The cutter is listed under SKU S005-1TM and is manufactured by Teknik Cutting Tools, making it straightforward to match with existing holders and ordering systems. The modest mass and standard shank diameter simplify handling and inventory. Combined with a supplier that offers specialist advice and reliable logistics, the tool helps maintain continuous operation and simplifies replacement planning. Discuss application-specific planning and availability with Metav Werkzeuge in Emmerich; request stock details or compatibility advice for the Teknik Cutting Tools S005-1TM shank milling cutter with internal coolant via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S005-1TM Brand: Teknik Makina Product type: Shank milling cutter Compatible inserts: APMT 0602 (Korloy) Internal coolant: Yes Weight: 0.121 kg Core dimensions Shank diameter: 16 mm Total length: 90 mm Cutting length: 25 mm Number of cutting edges: 4 Materials & special features Insert screw: Torx T6, M1.8×4.1 Suitable for Korloy APMT 0602 inserts Label: 16mm Schaftfräser APMT 0602 L90mm mit Innenkühlung eClass: 21180806 FAQ Which insert type fits this cutter? The shank milling cutter accepts APMT 0602 indexable inserts; it is designed to work with Korloy APMT 0602 inserts for straightforward interchangeability. Does the tool provide internal coolant? Yes, the cutter features internal coolant to deliver fluid to the cutting edge, aiding chip evacuation and thermal control during milling. What shank size and holder compatibility are required? A 16 mm shank diameter is specified; holders and collets must accommodate a 16 mm shank for correct clamping and concentricity. Which key and screw are used for insert changes? Insert retention uses a Torx T6 key and screw sized M1.8×4.1, permitting rapid and standardised insert replacement. For which machining tasks is this cutter suitable? The cutter suits general milling operations where indexable inserts are preferred, offering a 25 mm cutting length and four cutting edges for medium-depth passes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
High-performance shank cutters and ball nose cutters for efficient milling
Insert shank cutters and ball nose cutters combine flexibility and productivity for a wide range of milling tasks. The category covers steel-bodied shank cutters fitted with indexable inserts for economical roughing, face milling, cornering and slotting, as well as ball nose cutters for contouring and 3D finishing.
How these tools work and where they belong
Shank cutters with indexable inserts use a carrier body made from hardened steel; the cutting edges are provided by removable inserts rather than a solid tool blank. Where tools do not have internal coolant, process heat and chips are managed via external coolant nozzles or compressed air, which is sufficient for open, surface-level and easily accessible milling on standard materials. Shank cutters with internal coolant feature fine internal channels that deliver coolant or blasting air directly to each cutting edge under pressure. This targeted supply is essential for deep pockets, cavities, full slotting and machining of heat-resistant or difficult-to-machine materials, because it prevents chip re-cutting, protects cutting edges from thermal overload and enables higher feed rates and improved surface quality.
Cut cycle times and reduce tooling costs
- Replaceable indexable inserts reduce consumable costs and shorten tool change time.
- Targeted internal coolant improves chip evacuation and extends insert life.
- Robust steel carrier bodies enable heavy-duty roughing without frequent tool replacement.
- Suitable for roughing, planing, corner milling and slot milling as well as precision 3D profiling with ball nose cutters.
A practical choice for purchasing and stocking tools
Metav brings a pragmatic purchasing advantage: a broad range of milling solutions is available from a single European quality hub. Metav’s focus on democratising precision means workshops benefit from a wide assortment, consistent quality control from Emmerich and steady supply — supported by decades of expertise and over 48,000 satisfied customers. Choose Metav for a centralised sourcing strategy that reduces supplier complexity while keeping access to both insert milling cutters (also referred to as insert milling cutters or indexable end mills) and ball nose cutters (also known as ball nose end mills or radius cutters) straightforward.
Quick summary
Insert shank cutters and ball nose cutters deliver flexible, cost-effective milling: replaceable inserts lower running costs, and internal coolant options enable higher performance and longer tool life where chip control is critical.
FAQ
When should I choose a shank cutter with indexable inserts rather than a solid carbide end mill?
Choose shank cutters with indexable inserts for economical roughing and high-stock-removal tasks where replacing inserts is preferable to replacing an entire tool; they are especially effective for face milling, cornering and slotting operations.
Does internal coolant make a measurable difference for ball nose cutters?
Yes. Internal coolant directed to each cutting edge reduces chip re-cutting and thermal stress, which improves surface finish and increases insert life when machining deep pockets, cavities or heat-resistant materials.
Can shank cutters without internal coolant be used for general workshop milling?
Absolutely. Tools without internal coolant rely on external coolant nozzles or compressed air and are well suited to open, superficial and easily accessible milling on standard materials.
What milling operations are shank cutters for indexable inserts typically used for?
Shank cutters with indexable inserts excel at economical roughing, planfräsen (face milling), corner milling and slot milling; ball nose cutters are the preferred choice for 3D profiling and finishing operations.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com