High-precision clamping holders with internal coolant for extended tool life
Clamping holders with internal coolant are designed to secure indexable inserts accurately while delivering coolant directly to the cutting edge, reducing thermal load and improving chip evacuation in demanding metalworking operations. Used for turning and internal machining of tough materials, these holders channel the coolant through built-in boreholes to the insert and beneath the chip, which boosts tool life and enhances surface finish. As a reliable system solution, the combination of clamping holder, internal coolant and indexable insert ensures consistent performance at high cutting speeds and under heavy cut conditions.
Klemmhalter 95° SCLCL 1212 J09 für CC-- 09T3 Innenkühlung linksschneidend - Teknik Makina
Take advantage of a precise, ISO-compatible clamping solution that supports CC-- 09T3 indexable inserts and a left-hand cutting orientation for stable, repeatable turning results; order via Metav Werkzeuge or ask the technical consultants for application matching. Clamping Holder SCLC for CCMT Indexable Inserts — left-hand tool, ISO SCLCL 1212 by Teknik Makina A left-hand Clamping Holder SCLC for CCMT Indexable Inserts designed for secure clamping of CC-- 09T3 inserts in turning and facing operations Left-hand cutting orientation Compatible with CC-- 09T3 inserts ISO SCLCL 1212 shank format 110 mm overall length, 12 mm shank width Consistent clamping for predictable turning quality The holder is engineered to provide repeatable clamping and stable insert positioning, reducing variation between parts. Its compatibility with CC-- 09T3 indexable inserts and the SCLCL 1212 shank format ensures straightforward interchangeability with common tooling systems, so changeovers remain efficient. The 95° cutting angle positions the insert for conventional left-hand operations, which helps to achieve consistent chip flow and surface finish across batches while supporting process reliability on parallel turning tasks. Compact dimensions that enhance stability on the lathe Measured proportions translate directly into machining stability: 110 mm overall length, 12 mm shank width, 12 mm shank height and a 16 mm cutting-head width keep the tool rigid in the toolpost and reduce vibration during cut. The 16 mm cutting height aligns the insert with standard tool heights for many machines, simplifying setup. With a mass of 0.14 kg, the component is light enough for accurate dynamic response yet solid enough to contribute to a stable machining envelope, particularly important for fine finishing passes and small-batch precision work. Minimise tooling variants and streamline workshop workflows Using an ISO-format clamping solution for standard inserts reduces the number of specialised holders required and supports inventory rationalisation. The left-hand orientation of this holder is optimised for specific turning directions and can be paired with conventional insert grades for general-purpose steel work or with application-specific grades where higher wear resistance is needed. For procurement and logistics, the documented format and compatibility mean easier specification checks and fewer surprises at installation, which supports predictable production planning and cost control. For specification matching and supply of Teknik Cutting Tools clamping solutions, contact Metav Werkzeuge — Metav’s experts can confirm suitability for particular machines and inserts and arrange delivery from Emmerich Technical data Article number: D405TM Manufacturer: Teknik Makina Article name: SCLC for CCMT Indexable Inserts ISO designation: SCLCL 1212 Facts Overall length: 110 mm Shank width: 12 mm Shank height: 12 mm Cutting-head width: 16 mm Cutting height: 16 mm Weight: 0.14 kg Cutting angle: 95° Special features Left-hand cutting orientation Suitable for CC-- 09T3 indexable inserts ISO SCLCL 1212 shank format ECl@ss: 21181004 SKU: D405TM FAQ Which insert types fit this clamping holder? The holder is designed for CC-- 09T3 style indexable inserts; match the insert geometry and thickness to the SCLCL 1212 clamping seat for proper fit. Is this holder suitable for right-hand turning? This variant has a left-hand cutting orientation and is intended for left-hand turning operations; right-hand cuts require the corresponding right-hand holder. What does the ISO designation SCLCL 1212 mean for mounting? The SCLCL 1212 designation indicates the shank and clamping format, ensuring compatibility with toolposts and toolholders designed for that ISO shank profile. How does the 95° cutting angle affect machining? A 95° cutting angle offers a neutral approach for turning, balancing cutting forces and chip evacuation; it is particularly useful where a slightly negative rake or defined lead angle is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 95° SCLCL 1616 H09-IK for CCMT 09T3 Inserts Innenkühlung linksschneidend - Teknik Makina
Take advantage of the compact 100 mm length, precise clamping for CCMT 09T3 inserts and integrated internal coolant for improved chip evacuation. Order the holder directly via Metav Werkzeuge or contact our consultants for tailored technical advice. SCLCL 1616 clamping holder for CCMT indexable inserts, left-hand, internal coolant (Teknik Makina) A SCLCL 1616 clamping holder engineered for left-hand turning with CCMT 09T3 indexable inserts, ideal for confined turning operations Left-hand turning orientation Internal coolant for improved chip evacuation Compatible with CCMT 09T3 inserts Compact 100 mm length for tight spaces Consistent clamping and insert compatibility for efficient turning The holder delivers a dependable clamping solution for standard CCMT inserts, ensuring repeatable seating and straightforward insert changes. With an ISO form factor of SCLCL 1616, the design accommodates CCMT 09T3 inserts and secures them with the specified fastening hardware. The use of a Torx T15 key and an M3.5x11 screw simplifies assembly and maintenance, reducing set-up time on the shop floor. This combination of standards-based geometry and accessible fastening provides a rational basis for predictable machining cycles. Compact dimensions that ease access and improve rigidity A short overall length of 100 mm combined with a head width of 20 mm and a holder width of 16 mm makes the toolholder suited to restricted work envelopes. The holder’s modest footprint helps reduce overhang and enhances static rigidity during cuts, which can lead to steadier tool performance. The specified cutting height of 25 mm and holder height of 16 mm are matched to common turning tool stations, offering straightforward integration into existing tool posts without extensive modification. Built-in coolant delivery to support heat control and chip management The integrated internal coolant channel delivers cutting fluid close to the insert edge, assisting temperature control and aiding chip evacuation in both continuous and interrupted cuts. For left-hand operations, this coolant routing helps maintain consistent cutting conditions at the point of contact, which is especially useful when turning alloys or demanding materials where thermal management improves tool life and surface finish. Simple fitment and workshop-friendly handling Installation is straightforward: the holder accepts the designated U plate TA015 and is secured with the supplied Torx screw specification. The clear technical references and compact 0.205 kg weight make handling and changeover practical in a production environment. The holder’s 95° cutting angle aligns with common turning geometries, providing a balance between approach angle and clearance for a variety of standard turning tasks. For procurement or to discuss suitability for specific turning operations, contact Metav Werkzeuge for prompt supply and technical guidance from our Emmerich location: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: AP505TM Manufacturer: Teknik Makina Article designation: SCLC for CCMT Indexable Inserts ISO designation: SCLCL 1616 Compatible insert: CCMT 09T3 U plate: TA015 Torx key: T15 Torx screw: M3.5x11 Cutting direction: left Internal coolant: yes Dimensions / Core data Total length: 100 mm Cutting height: 25 mm Holder height: 16 mm Head width: 20 mm Holder width: 16 mm Cutting angle: 95° Weight: 0.205 kg Features / Special characteristics Left-hand orientation Internal coolant supply For CCMT 09T3 inserts ISO SCLCL 1616 form factor Compact design for tight turning applications FAQ Which inserts are compatible with this holder? The SCLCL 1616 clamping holder from Teknik Makina is designed for CCMT 09T3 indexable inserts and secures them in the specified seating geometry. Does the holder provide coolant to the cutting edge? Yes, the holder features internal coolant routing to support cooling and chip evacuation directly at the insert location. Is this holder suitable for left-hand turning only? The toolholder is manufactured for left-hand turning operations and should be used accordingly in the lathe set-up. What fastening parts are required for installation? Fitment uses the U plate TA015 together with the Torx screw specified as M3.5x11, tightened with a Torx T15 key. Which workshop applications suit this toolholder? The holder is suited to external turning where a compact 100 mm overall length and CCMT 09T3 inserts are required, particularly in confined toolpost setups or where internal coolant is beneficial. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 95° SCLCL 2020 K09 for CC-- 09T3 Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
A compact left-hand turning toolholder that combines secure clamping for CCMT-style inserts with a precise 95° cutting angle for steady material engagement; the robust 125 mm overall length and 25 mm cutting-head width support vibration damping and repeatable results. Order the holder directly via Metav Werkzeuge or consult the specialists for application advice. Klemmhalter SCLC for CCMT Indexable Inserts — left-hand turning, ISO SCLCL 2020 (Teknik Makina) The Klemmhalter SCLC for CCMT Indexable Inserts is a left-hand turning toolholder designed for secure clamping of CCMT-style inserts in standard lathe toolposts, optimised for repeatable external turning operations. Left-hand turning holder compatible with CCMT inserts ISO SCLCL 2020 format for standard toolposts Secure clamp for CC-- 09T3 insert style 125 mm overall length for improved stability Consistent clamping for repeatable turning quality The holder is engineered to deliver secure clamping of indexable inserts, minimising micro-movement during cutting and therefore improving dimensional repeatability. The toolholder's geometry, defined to ISO SCLCL 2020, positions the insert at a 95° cutting angle that supports stable chip evacuation and consistent surface finish. For production environments the result is fewer reworks and reduced cycle-time variance, which translates directly into measurable process reliability. Robust form factor that reduces vibration and runout With a 125 mm overall length and a 25 mm cutting-head width, the assembly offers a compact but rigid footprint that dampens vibration during external turning. The holder body dimensions and a weight of 0.425 kg create sufficient mass to absorb cutting forces without compromising tool-change ergonomics. The combination of stiffness and compactness supports higher feed rates at consistent cutting depths, improving throughput without sacrificing accuracy. Direct compatibility and simple insert selection Designed for CCMT-style indexable inserts—specified here for the CC-- 09T3 size—the toolholder accepts common carbide grades used across general engineering and finishing tasks. The left-hand orientation is specified for machining operations that require counter-rotation of the workpiece relative to the tool. The standard ISO form means cutters and inserts from established suppliers will seat correctly, enabling straightforward selection of carbide grades and coatings for materials ranging from mild steel to stainless variants. Practical handling and low-maintenance operation The toolholder is finished to industrial tolerances and uses a conventional clamping mechanism for easy insert changes and secure seating. The shank designation K09 facilitates predictable mounting in compatible boring bars or tool posts, while the compact head minimises interference in confined set-ups. Routine upkeep is limited to cleaning and periodic torque checks on the clamping screw, so workshop downtime is kept to a minimum and availability is maximised. For secure left-hand turning with Teknik Makina’s SCLC toolholder, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to confirm fitment for CCMT inserts and to arrange supply from our Emmerich facility Technical Data Article number: D407TM Manufacturer: Teknik Makina Designation: SCLC for CCMT Indexable Inserts ISO designation: SCLCL 2020 Dimensions & performance Overall length: 125 mm Cutting head width: 25 mm Holder width: 20 mm Holder height: 20 mm Cutting height: 25 mm Weight: 0.425 kg Cutting angle: 95° Cutting direction: left Compatibility & features For indexable inserts: CC-- 09T3 Shank designation: K09 Suitable for ISO SCLCL 2020 toolposts Left-hand turning orientation FAQ What insert types fit this toolholder? The toolholder is intended for CCMT-style indexable inserts, specified in the data as compatible with the CC-- 09T3 size; standard CCMT grades and chipbreakers will seat correctly in the SCLCL 2020 pocket. Is the holder suitable for right-hand turning operations? This variant is a left-hand holder; for right-hand machining a corresponding right-hand holder must be selected to match the required cutting direction. How does the 95° cutting angle affect machining? A 95° angle provides good radial support and chip control for external turning, improving surface finish and helping to stabilise the cut when combined with the holder’s rigid form. Can the holder be used with hardened or stainless materials? The holder accepts carbide CCMT inserts; selection of the correct insert grade and coating determines suitability for stainless or harder materials rather than the holder itself. What is the purpose of the K09 shank designation? K09 indicates the shank or mounting form used for fitting the holder into compatible boring bars or toolposts, ensuring repeatable and secure installation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 95° SCLCL 2020 K09-IK für CCMT 09T3 Innenkühlung linksschneidend - Teknik Makina
Benefit from secure clamping and internal coolant for consistent turning performance; its compact 125 mm length and rigid clamping deliver repeatable results across production runs. Combine the left‑hand geometry with compatibility for CCMT 09T3 inserts to simplify tooling inventory. Order the clamping holder directly via Metav Werkzeuge or ask our consultants if needed. Clamping holder SCLCL 2020 for CCMT indexable inserts — left‑hand, internal coolant (Teknik Makina) The clamping holder is a left‑hand turning toolholder engineered for external turning with CCMT 09T3 indexable inserts; it integrates internal coolant and a compact profile for reliable chip control in serial production. Left‑hand turning geometry Internal coolant for effective chip evacuation Compatible with CCMT 09T3 inserts ISO SCLCL 2020 designation Rigid clamping for repeatable turning quality The holder’s geometry and clamping design provide stable fixation that reduces vibration and tool deflection during turning operations. Built to the SCLCL 2020 ISO form, this toolholder accepts CCMT 09T3 inserts and maintains a defined 95° cutting angle, which supports predictable cutting forces and surface finish. With a nominal cutting height of 25 mm and a holder height of 20 mm, the assembly offers a compact, robust solution for medium‑run production, translating to fewer tool changes and consistent part tolerances. Improved process control through internal coolant Integrated internal coolant channels direct fluid to the cutting edge, improving chip evacuation and extending insert life under continuous use. This feature reduces heat buildup at the cutting zone, which in turn helps preserve edge geometry and lowers the risk of built‑up edge formation. The combination of internal cooling and appropriate insert geometry supports longer uninterrupted cycles and steadier machining results, especially when machining demanding alloys or interrupted cuts. Compact dimensions and practical workshop compatibility The toolholder’s 125 mm overall length and a cutting‑head width of 25 mm make it suitable for installations where space is limited but rigidity is required. The unit weighs 0.418 kg, balancing sturdiness with manageable handling during tool changes. Fastening uses a Torx M3.5×11 screw (Torx key T15) and a U‑plate TA015 for secure clamping; the holder also matches shank reference K09‑IK for straightforward integration into existing toolposts. Left‑hand orientation simplifies fixture planning where specific cutting directions are required and reduces the need for adapter tooling in many setups. Contact Metav Werkzeuge today to discuss Teknik Makina’s left‑hand SCLCL 2020 clamping holder (SKU AP506TM) and request a tailored tooling recommendation from our specialists Technical data Article number: AP506TM Brand: Teknik Makina ISO designation: SCLCL 2020 Facts Holder height: 20 mm Holder width: 20 mm Cutting‑head width: 25 mm Cutting height: 25 mm Overall length: 125 mm Weight: 0.418 kg Cutting angle: 95° Direction: left‑hand Special features Compatible with CCMT 09T3 inserts Internal coolant U‑plate: TA015 Torx key size: T15 Torx screw: M3.5×11 Compatible tool shank: K09‑IK FAQ Which inserts fit this holder? The clamping holder accepts CCMT 09T3 indexable inserts; the SCLCL 2020 form ensures secure seating and correct rake alignment for these inserts. Is the toolholder suitable for internal coolant supply? Yes, the toolholder features internal coolant, enabling directed cooling to the cutting edge for improved chip control and insert life. What is the cutting direction of the holder? This tooling is manufactured for left‑hand turning operations and is designated accordingly in the product specification (SKU AP506TM). Which fastening components are required for installation? Assembly uses a U‑plate TA015 and a Torx screw M3.5×11 (Torx key T15) to secure the insert and plate in the pocket. Can this holder be used in compact turrets and small lathes? The compact 125 mm overall length and modest profile are suited to tighter turret pockets where a robust, space‑efficient turning solution is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 95° SCLCL 2525 M09 for CC-- 09T3 Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
Benefit from secure clamping with a 95° cutting angle and a compact 150 mm overall length for consistent left‑hand turning — order the SCLC for CCMT indexable inserts via Metav Werkzeuge or contact our consultants for tailored advice. SCLC for CCMT Indexable Inserts — Clamping holder, left‑hand SCLC for CCMT Indexable Inserts is a left‑hand clamping holder designed for turning operations with CCMT style indexable inserts; ideal for stable, repeatable machining in production and workshop environments Secure clamp for CCMT 09T3 inserts 95° cutting angle for precise turning SCLCL 2525 shank, 25 x 25 mm 150 mm overall length, 0.772 kg Consistent cutting performance through secure clamping The clamping device delivers stable cutting thanks to a robust clamping concept and a 95° cutting angle, which together reduce vibration and improve surface finish when machining steels and general turning tasks. The holder’s secure clamp keeps CCMT inserts firmly in position, supporting predictable tool life and fewer re‑settings. For workshops seeking repeatability, this stability translates into fewer rejects and more reliable cycle times. Compact design for accessible setup and rigidity With an overall length of 150 mm and a compact 25 x 25 mm shank profile, the tool balances accessibility and rigidity for confined toolposts. The moderate mass (0.772 kg) helps to dampen chatter without compromising manoeuvrability during setups. This compact format is beneficial where turret clearance is limited and where quick tool changes are required, enabling faster machine turnaround and improved shopfloor productivity. Compatibility and fast integration into existing toolchains The holder is specified as SCLCL 2525, making it compatible with standard toolholders and keyways; it accepts CC-- 09T3 inserts and is intended for left‑hand cutting applications. The straightforward interface, including M09 mounting designation, reduces installation time and simplifies inventory management. Integrating this holder into a current tooling strategy minimises downtime and supports a more efficient spare‑parts approach. Practical benefits for production and craft environments Featuring a defined geometry and a focus on secure retention, this clamping solution supports both short production runs and serial turning operations. The design reduces the need for frequent insert re‑adjustment, which in turn lowers cumulative setup effort and contributes to improved throughput. Operators gain a durable, consistent toolholding option that complements existing indexable insert strategies, especially where left‑hand operations are standard. Contact Metav Werkzeuge in Emmerich to specify the right clamping holder for your machine (SKU D408TM) or request technical guidance by phone on +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical data Article number: D408TM Manufacturer: Teknik Makina Product: SCLC for CCMT Indexable Inserts Dimensions & weight Overall length: 150 mm Holder height: 25 mm Head width: 32 mm Holder width: 25 mm Weight: 0.772 kg Compatibility & features Insert compatibility: CC-- 09T3 Cutting direction: Left Cutting angle: 95° Shank designation: SCLCL 2525 Mounting designation: M09 FAQ Which insert type is compatible with this holder? The holder accepts CC-- 09T3 indexable inserts; the SCLC geometry is designed to secure CCMT‑style carbide inserts for turning operations. Is this tool suitable for left‑hand turning only? Yes, the clamping holder is configured for left‑hand cutting and is intended for operations where the cutting direction is leftward. What are the shank dimensions and designation? The tool features a 25 x 25 mm shank with the ISO designation SCLCL 2525, providing a standard interface for compatible toolposts. How does the 95° cutting angle affect machining? The 95° cutting angle offers a balance between strength and accessibility at the cutting edge, improving chip control and surface finish during peripheral turning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Klemmhalter 95° SCLCL 2525 M12-IK for CCMT 1204 Wendeplatten Innenkühlung linksschneidend - Teknik Makina
Take advantage of a robust left-hand clamp holder that combines precise insert compatibility and internal coolant routing for consistent chip control and longer tool life; order directly via Metav Werkzeuge or request technical advice from our specialists. Clamp Holder SCLC for CCMT Indexable Inserts (SCLCL 2525) — Teknik Makina, left-hand, internal coolant A Clamp Holder SCLC for CCMT Indexable Inserts designed for left-hand turning applications, offering coolant-through capability and a compact 150 mm overall length for workshop installations. Left-hand turning orientation Internal coolant supply Suited for CCMT 1204 inserts ISO SCLCL 2525, 150 mm overall length Reliable compatibility for turning operations The holder is engineered for consistent performance with CCMT 1204 indexable inserts, providing a predictable cutting geometry that reduces set-up time. Its ISO SCLCL 2525 designation ensures compatibility with established toolholder systems; the standardised interface simplifies inventory management and makes replacements straightforward. By matching the insert form to the holder’s geometry, machinists benefit from repeatable part quality and simplified process documentation. Coolant-assisted chip control and cutting stability With internal coolant routing the design supports direct fluid delivery to the cutting zone, improving chip evacuation and reducing thermal load on the insert. The holder’s 95° cutting angle promotes stable engagement on external turning tasks, which helps maintain surface finish and tool life under continuous operation. These functional choices translate into higher material removal rates and reduced secondary operations for many turning cycles. Compact, robust construction for workshop efficiency A compact overall length of 150 mm and a shank height of 25 mm keep the holder rigid in short overhang setups, limiting vibration and enhancing dimensional stability. The cutting head width of 32 mm and a cutting height of 30 mm support secure clamping forces and predictable chip formation. The assembly weight of 0.771 kg balances inertia and handling convenience, so set-up is efficient without compromising the mass needed for damping cutting forces. Practical fastening and maintenance features The holder uses a Torx fastening system (Torx T15 with an M4x11 screw) and an accessory U-plate TA015-1, which allow quick insert replacement and reliable clamping repeatability. A compatible boring bar designation M12-IK is indicated for appropriate machine interfaces. These standardised fastening elements reduce downtime during tool changes and make maintenance straightforward even for smaller workshop teams. Contact Metav Werkzeuge with the SKU AP508TM for tailored advice on integrating this left-hand clamp holder into the production line and to arrange supply directly from Emmerich; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: AP508TM Manufacturer: Teknik Makina Facts Overall length: 150 mm Shank height: 25 mm Shank width: 25 mm Cutting head width: 32 mm Cutting height: 30 mm Weight: 0.771 kg Cutting angle: 95° Cutting direction: left Special features Suited for CCMT 1204 indexable inserts Internal coolant supply ISO designation SCLCL 2525 U-plate TA015-1 Torx screw M4x11 / Torx key T15 Boring bar designation M12-IK FAQ Which inserts fit this holder? The holder is specified for CCMT 1204 indexable inserts; this geometry matches the clamping pocket and cutting height to ensure correct seating and cutting clearance. Is coolant-through supported? Yes, internal coolant supply is integrated into the design to deliver fluid directly to the cutting edge and assist chip evacuation during turning. Can it be used for right-hand turning? This version is manufactured for left-hand turning; right-hand operations require the corresponding right-hand variant with mirrored orientation. What fastening hardware is required for insert clamping? Insert clamping uses an M4x11 Torx screw tightened with a Torx T15 key and the supplied U-plate TA015-1 for reliable fixation. How does the SCLCL 2525 designation help in tool selection? The SCLCL 2525 ISO designation indicates the standardised shank and pocket geometry, simplifying matching with tool posts and stock management. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 95° SCLCR 1616 H09 for CC-- 09T3 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, rigid turning solution that combines reliable clamping, precise geometry and easy integration into existing turret setups — ideal for reducing vibration and improving surface finish. Benefit from the holder's compatibility with common CCMT inserts and the practical 100 mm length for lower overhang; order or request application advice via Metav Werkzeuge for fast, reliable supply. SCLC for CCMT Indexable Inserts — right‑hand turning toolholder by Teknik Makina with 95° cutting angle The SCLC for CCMT Indexable Inserts is a right‑hand turning holder engineered for use with CC--09T3 (CCMT) indexable inserts in external turning applications Right‑hand turning holder SCLCR 1616 Compatible with CC--09T3 CCMT inserts 95° cutting angle for stable machining 100 mm overall length for reduced overhang Stable clamping for consistent turning results The holder is built around the ISO designation SCLCR 1616, providing a standardised mounting form that supports secure clamping of CCMT‑style inserts. Secure insert fastening and a compact insert pocket reduce micro‑movement, which translates into improved repeatability and a more consistent surface finish on turned components. For production environments, the increased rigidity lowers the risk of chatter and helps maintain dimensional tolerances across longer runs. Precision geometry that speeds set‑up and cuts cycle time A 95° cutting angle and a cutting height of 20 mm deliver a geometry that balances clearance and cutting force direction for typical external turning operations. The orientation and angle ease approach to shoulders and allow predictable chip flow, which simplifies initial set‑up and reduces the need for iterative adjustments. With the right‑hand configuration, the toolholder reliably supports conventional turning directions used across lathe platforms. Compact dimensions for flexible workshop integration With a total length of 100 mm, head width 20 mm and holder width 16 mm, the toolholder is sized to minimise overhang while retaining the accessibility needed for various turret pockets. The modest mass (0.215 kg) contributes to lower centrifugal loading in high‑speed operations and helps keep dynamic loads manageable. These compact dimensions make the component suitable for cramped tool positions and multi‑station turrets without sacrificing stability. Production reliability and broad insert compatibility Designed for indexable CCMT inserts (designation CC--09T3), the holder supports quick insert changes and cost‑effective edge renewals, making it suitable for both small batches and continuous production. The right‑hand cutting direction and standard shank form enable straightforward replacement of existing holders, while the robust design focuses on long‑term reliability and predictable machining outcomes. The combination of secure clamping and standard compatibility reduces tooling downtime and streamlines tool management. Discuss application requirements with Metav Werkzeuge to confirm insert compatibility and receive delivery options from Emmerich for the Teknik Makina turning holder (SKU D401TM) Technical data Article number: D401TM Brand: Teknik Makina ISO designation: SCLCR 1616 Compatible inserts: CC--09T3 (CCMT) Cutting direction: right Facts Total length: 100 mm Head width: 20 mm Holder width: 16 mm Holder height: 16 mm Cutting height: 20 mm Cutting angle: 95° Weight: 0.215 kg eClass: 21181004 Special features Right‑hand turning toolholder Designed for indexable CCMT inserts Standardised shank form for turret mounting Files: migration IDs included FAQ Which inserts fit this holder? The holder accepts CC--09T3 indexable inserts (CCMT style); compatibility ensures quick insert changes and common spare parts. Is the cutting direction fixed? Yes, the toolholder is configured for right‑hand cutting, suitable for conventional external turning applications. What is the ISO designation and why does it matter? The ISO designation SCLCR 1616 defines the shank and mounting form, providing interchangeability and predictable fit in turret pockets. How does the 95° cutting angle affect machining? A 95° cutting angle offers a balance of clearance and cutting force direction, improving contact stability and aiding predictable chip flow. Can this holder reduce vibration on small lathes? The compact 100 mm length and rigid clamping reduce overhang and dynamic loading, which helps lower vibration when fitted correctly. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 95° SCLCR 1616 H09-F for CCMT 09T3 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of the precise fit, rigid 16 mm profile and compatibility with CCMT 09T3 inserts to maintain consistent turning performance; order via Metav Werkzeuge or consult our specialists for application advice. Klemmhalter SCLC for CCMT Indexable Inserts — SCLCR 1616, 16×100 mm (Teknik Makina) The Klemmhalter SCLC for CCMT Indexable Inserts is a right-hand turning clamping holder engineered for reliable seating of CCMT 09T3 inserts in workshop and industrial lathe applications SCLCR 1616 profile for reliable fit Compatible with CCMT 09T3 indexable inserts 16 mm head and shank width for rigidity Right-hand orientation, 100 mm overall length Precision fit for reproducible turning results The SCLCR 1616 profile delivers a consistent seating surface that reduces variation between setups. By matching the geometry of common CCMT inserts, the holder improves repeatability and makes indexable insert changes straightforward. The combination of a standard SCLCR 1616 interface with the accepted CCMT 09T3 form ensures interchangeability with established tool systems and supports predictable component tolerances in small-batch and serial production alike. Stiff construction to reduce vibration and prolong insert life A firm toolholder cross-section of 16 mm (head and shank) and an overall length of 100 mm provide a rigid support platform that helps to limit chatter during turning. The 95° cutting angle promotes adequate clearance while maintaining positive support for the cutting edge, so the clamping arrangement contributes to steady chip formation and extended insert life. With a compact mass (approx. 0.224 kg) the holder balances responsiveness and stability on medium‑duty turning operations. Straightforward compatibility for effective workshop integration Designed for right‑hand operations and referenced by the ISO designation SCLCR 1616, the holder matches common lathe toolposts and insert inventories. The boreshaft designation H09‑F indicates the applicable shank interface for mounting; the unit is intended specifically for use with CCMT 09T3 indexable plates. This focused compatibility simplifies tool provisioning and makes the holder a pragmatic choice for workshops standardising on CCMT inserts and ISO‑conforming toolholders. Contact Metav Werkzeuge for ordering and technical advice on the Teknik Cutting Tools SCLCR 1616 clamping holder (SKU D428TM): call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: D428TM Manufacturer: Teknik Makina Designation: Klemmhalter SCLC for CCMT Indexable Inserts ISO designation: SCLCR 1616 Facts Weight: 0.224 kg Overall length: 100 mm Head width: 16 mm Holder height: 16 mm Cutting angle: 95° Cutting direction: right Special features For CCMT 09T3 indexable inserts Bohrstangen designation: H09-F Right-hand turning holder ECLASS: 21181004 FAQ Which insert geometry fits this holder? The holder accepts CCMT 09T3 indexable inserts; the clamping pocket and seat geometry are matched to that insert form for secure location and reliable cutting. Is the holder right‑hand or left‑hand? This turning tool is specified for right‑hand cutting direction, which suits standard external turning operations requiring a right‑hand approach. What is the ISO size and key dimensions? The unit carries the SCLCR 1616 ISO designation; key dimensions include a 16 mm head/shank profile and a 100 mm overall length, providing a compact, rigid mounting. How does the cutting angle affect machining? A 95° cutting angle offers a balance between clearance and support, aiding chip flow and tool life when paired with the correct insert geometry and stable clamping. Which shank or toolpost interfaces are compatible? The toolholder references bohrstangen designation H09‑F for shank mounting; the ISO profile and dimensions support integration with common lathe toolposts and fixtures. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 95° SCLCR 1616 H09-IK for CCMT 09T3 Inserts Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a robust turning solution that combines 95° cutting geometry, internal coolant and precise ISO‑standard mounting for consistent, long‑running performance; order directly via Metav Werkzeuge or consult our specialists for application matching. Klemmhalter — SCLCR 1616 turning holder with 95° head by Teknik Cutting Tools Klemmhalter is a right‑hand turning holder designed for secure clamping of CCMT 09T3 indexable inserts and for demanding facing and general turning applications SCLCR 1616 ISO mounting for consistent alignment Compatible with CCMT 09T3 indexable inserts 95° cutting angle for stable facing and turning Integrated internal coolant for improved tool life Maximise rigidity and repeatability at the toolpost The SCLCR 1616 design places emphasis on precision and structural stability. With a holder height of 16 mm and a head width of 20 mm, the toolholder minimises deflection under load and ensures repeatable insert positioning. The modest weight (0.205 kg) and a compact overall length of 100 mm make the adapter simple to handle while maintaining a solid clamping interface. For production environments where small deviations multiply into rejects, this construction reduces vibration and supports consistent surface finish and dimensional accuracy. Better chip control and longer insert life through coolant and geometry A 95° cutting angle coupled with internal coolant directs cutting fluid close to the cutting edge, which reduces heat build‑up and improves chip evacuation. Compatibility with CCMT 09T3 grades means a wide range of carbide inserts can be used to balance wear resistance and cutting performance. The result is a measurable improvement in tool life and cycle efficiency: cooler cutting conditions lower thermal wear, while cleaner chip flow reduces rework and machine downtime, delivering a better cost‑per‑part ratio for batch production. Secure clamping and standardised service parts for quick maintenance Clamping reliability is achieved with the supplied U‑plate TA015, a Torx‑head fastener (M3.5x11) and a Torx key size T15, which together provide a predictable torque and repeatable clamping force. The holder mates with the H09‑IK shank family for easy replacement in common toolposts. These standardised components simplify maintenance and reduce the inventory of spare parts required on the shop floor. Fast insert changes and secure fixation cut set‑up time and help maintain cycle stability across shifts. Application fit and procurement for workshop efficiency Designed for right‑hand turning operations, the holder is well suited to facing, light profiling and general external turning where a 95° approach gives a favourable cutting geometry. Classified under eClass 21181004, the toolholder integrates into established procurement and tooling systems without ambiguity. For workshops seeking a balance of reliability and adaptability, this holder supports multiple carbide grades and insert geometries, enabling rapid process optimisation when moving between materials or components. For procurement advice or to match the holder to specific inserts and machines, contact Metav Werkzeuge — reliable supply and technical consultation from Emmerich at info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data SKU: AP500TM Manufacturer: Teknik Makina ISO designation: SCLCR 1616 Type: SCLC for CCMT indexable inserts Facts Cutting angle: 95° Cutting direction: right Holder height: 16 mm Head width: 20 mm Overall length: 100 mm Cutting height: 25 mm Weight: 0.205 kg Compatible inserts: CCMT 09T3 Internal coolant: yes eClass: 21181004 Special features U‑plate: TA015 Torx key size: T15 Torx screw: M3,5x11 Toolholder shank reference: H09-IK FAQ Which inserts fit this holder? The holder accepts CCMT 09T3 indexable inserts; the Klemmhalter SCLC for CCMT indexable inserts (AP500TM) is optimised for those insert geometries to ensure proper seating and cutting performance. Is the holder suitable for facing operations? Yes. The 95° cutting angle makes the holder particularly effective for facing and transverse cuts, providing a stable approach angle that supports consistent surface finish. Does the toolholder provide coolant supply to the insert? Internal coolant is integrated into the design; this cooling improves chip evacuation and extends the life of the insert and the holder in continuous operation. What fastening parts are used and how easy is maintenance? Clamping is via a M3.5x11 Torx screw using a T15 key, with the TA015 U‑plate securing the insert; the use of standard parts simplifies maintenance and reduces downtime. What are the key dimensions and identification? The tool is designated SCLCR 1616, with a holder height of 16 mm, head width 20 mm, overall length 100 mm, and a mass of approximately 0.205 kg; SKU AP500TM identifies this specific configuration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 95° SCLCR 2020 K09-IK for CCMT 09T3 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, right-hand SCLC clamping holder that accepts CCMT 09T3 indexable inserts and features internal coolant for improved chip control; order directly via Metav Werkzeuge or consult our specialists for application advice. SCLC Toolholder AP501TM – SCLCR 2020, right-hand clamping holder with internal coolant by Teknik Makina The SCLC for CCMT Indexable Inserts AP501TM is a right-hand clamping holder designed for turning applications, offering secure insert clamping and integrated coolant supply for consistent machining performance. Right-hand SCLC holder for CCMT 09T3 Internal coolant for improved chip control ISO SCLCR 2020 designation for compatibility 125 mm overall length, 20 x 20 mm shank Consistent clamping for stable turning operations A rigid clamping system is the core of repeatable turning. The clamping holder secures CCMT 09T3 indexable inserts with a firm seat and defined pocket geometry, reducing micro-movement and vibration during cuts. The ISO designation SCLCR 2020 reflects the standardised holder geometry, which simplifies tool setup and spare-part management across machines. With a cutting height of 25 mm and a cutting angle of 95°, the toolholder delivers the axial and radial positioning needed for predictable chip formation and surface finish. This stability translates directly into fewer part rejections and a steadier production flow for small-batch and series turning. Efficient cooling and reliable fastening minimise downtime Integrated internal coolant directs lubricant and coolant to the cutting zone, helping to control temperature, flush chips away from the insert seat and extend insert life. The clamping mechanism uses a secure Torx fastening system (Torx key T15, screw M3.5x11) and a U-plate TA015 to ensure repeatable torque and quick insert changes. These features reduce unplanned stoppages and make routine tool maintenance faster, which supports higher machine utilisation and predictable cycle times. The right-hand orientation is optimised for conventional turning directions on most lathes and turning centres. Compact profile for easy integration and workshop flexibility Designed with a 20 x 20 mm shank and an overall length of 125 mm, the holder fits standard tool posts and fixtures while keeping clearances tight in compact setups. The cutting head width of 25 mm and a total weight of 0.418 kg balance rigidity with manageable mass at the turret, aiding stable indexing and low inertia during rapid tool changes. The compact dimensions make this clamping holder suitable for general workshop use, subcontract turning and OEM production where space and repeatability matter. For workshops seeking dependable turning performance without complex retrofits, this holder integrates directly into existing tooling systems. For tailored technical advice or supply of the Teknik Cutting Tools SCLC clamping holder, contact Metav Werkzeuge in Emmerich for personalised guidance and reliable delivery from the Metav Quality Filter Technical data Article number: AP501TM Brand: Teknik Makina ISO designation: SCLCR 2020 Compatible inserts: CCMT 09T3 Dimensions & weight Overall length: 125 mm Shank width: 20 mm Shank height: 20 mm Cutting head width: 25 mm Cutting height: 25 mm Weight: 0.418 kg Cutting angle: 95° Features & fittings Right-hand cutting direction Internal coolant Torx key: T15 Torx screw: M3.5x11 U-plate: TA015 Suitable for CCMT 09T3 indexable inserts FAQ Which inserts fit this holder? The holder is designed for CCMT 09T3 indexable inserts; compatibility is ensured by the SCLCR 2020 pocket geometry used in the AP501TM. Does the holder provide coolant supply? Yes, the AP501TM features internal coolant to the cutting zone for improved chip evacuation and thermal control. Is the clamping holder suitable for left-hand turning? The clamping holder is specified for right-hand cutting; left-hand operations require a corresponding left-hand toolholder. What are the shank dimensions and overall length? Shank size is 20 x 20 mm with an overall length of 125 mm, suitable for standard tool posts and turrets. What fastening parts are used for the insert seat? Fastening is via a Torx screw M3.5x11, tightened with a T15 Torx key; the assembly includes a U-plate TA015 for secure seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 95° SCLCR 2525 M09 für CC-- 09T3 Innenkühlung Rechtsschneidend - Teknik Makina
Combine a robust clamping concept with a 95° cutting angle and standard ISO form factor for consistent, stable turning results; order the clamping holder directly via Metav Werkzeuge or consult our specialists for tailored advice. Klemmhalter SCLC for CCMT Indexable Inserts (SCLCR 2525) — right-hand, 95° cutting angle The Klemmhalter SCLC for CCMT Indexable Inserts is a right-hand turning holder engineered for CC-- 09T3 style inserts, delivering a 95° cutting orientation and a compact 150 mm overall length for reliable lathe operations Right-hand turning holder for lathe operations 95° cutting angle for secure chip evacuation ISO SCLCR 2525 form factor for standard mounting Compatible with CC-- 09T3 CCMT indexable inserts Stable clamping and precise geometry for repeatable turning The SCLCR 2525 design combines a robust clamping mechanism with precisely defined cutter geometry to maintain cutting consistency under varied loads. With a 25 mm cutting height and a head width of 32 mm, the holder offers a predictable tool projection and contact area, which helps to reduce vibration and maintain dimensional tolerance across production batches. The measured mass of 0.772 kg contributes to a balanced setup that supports steady cutting forces without unnecessary toolholder flexing, improving repeatability on short- to medium-length turning tasks. Broad insert compatibility with secure seat and clearance management Compatibility with CC-- 09T3 / CCMT 09T3 indexable inserts allows straightforward tooling selection from common suppliers, while the SCLC clamping concept ensures the insert is held securely for stable chip formation. The 95° cutting angle provides clearance that helps direct chips away from the workpiece and toolpost, reducing rework and tool interference. The ISO designation SCLCR 2525 simplifies replacement and integration into existing toolholders, supporting quick changeovers and minimal setup time in a production environment. Efficiency and workshop advantage through standardisation Adopting a holder in the ISO SCLCR family streamlines stock and maintenance procedures: standardised geometries mean fewer special items in the tooling cabinet and faster operator familiarisation. The compact 150 mm overall length makes the holder suitable for constrained setups where projection must be limited, while the right-hand orientation suits conventional turning directions. Overall, the combination of standard form factor, secure clamping and considered geometry supports higher machine uptime and predictable surface finishes on turned parts. For Teknik Makina precision and fast availability, contact Metav Werkzeuge for product details, delivery options and application advice — info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: D403TM Manufacturer: Teknik Makina SKU: D403TM ISO designation: SCLCR 2525 Data Overall length: 150 mm Weight: 0.772 kg Cutting height: 25 mm Head width: 32 mm Body width: 25 mm Cutting angle: 95° Special features Holder type: SCLC clamping holder For inserts: CC-- 09T3 / CCMT 09T3 Direction: Right-hand Boring bar designation: M09 FAQ Which inserts fit this holder? The Klemmhalter SCLC for CCMT Indexable Inserts accepts CC-- 09T3 / CCMT 09T3 indexable inserts and is designed to work with common CCMT geometries. Is the holder right- or left-hand? This holder is a right-hand turning tool, manufactured by Teknik Makina and supplied under SKU D403TM. What does the ISO designation SCLCR 2525 indicate? The ISO SCLCR 2525 designation refers to the holder’s standardised shank and clamping form, making it compatible with typical turret pockets and facilitating direct substitution. How does the 95° cutting angle affect machining? A 95° cutting angle provides increased clearance at the insert edge and supports controlled chip flow, reducing interference and improving surface finish in many turning operations. Is this holder suitable for short overhang applications? With a 150 mm overall length and compact geometry, the holder is well suited to setups that require limited tool projection and good rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 95° SCLCR 2525 M12 for CC-- 1204 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a robust right-hand turning solution that combines secure M12 clamping, a 25 mm cutting height and a compact 150 mm length for reliable, repeatable results on conventional lathes — order via Metav Werkzeuge or contact the consultants for specification advice. Klemmhalter SCLCR 2525 — SCLC for CCMT indexable inserts, right‑hand, 25 mm cutting height (Teknik Makina) A Klemmhalter SCLCR 2525 turning toolholder engineered for right‑hand external turning with CCMT 1204 indexable inserts, offering stable clamping and compact dimensions for workshop use Right‑hand turning orientation compatible Accepts CCMT 1204 indexable inserts 25 mm cutting height for stable cutting ISO designation SCLCR 2525 for easy identification Stable clamping for consistent turning quality The toolholder delivers secure M12 clamping, which fixes the insert carrier firmly and reduces chatter during cuts. This stability translates into consistent surface finish and fewer rework cycles, particularly where repeatability matters. The design supports CCMT 1204 inserts, a common format that balances adaptability and economy. By prioritising rigid fixation and clear ISO identification, the bar promotes predictable performance across batch production and single setups. Optimised geometry for efficient right‑hand operations Configured for right‑hand external turning, the holder features a 95° cutting angle that positions the insert for effective material engagement and chip flow. The 25 mm cutting height gives a reliable reference for insert seating and depth control, simplifying setup times and reducing adjustment work. These measured geometry choices help shorten cycle times while maintaining control over cutting forces, making the holder suitable for standard turning and light profiling tasks where process reliability is a priority. Compact format that fits modern workshops With an overall length of 150 mm and a compact head width of 32 mm, the holder is dimensioned to fit a wide range of turret and toolpost arrangements without occupying excessive space. The slim shank width of 25 mm and a mass of 0.768 kg make it straightforward to handle and mount, while the SCLCR 2525 ISO designation ensures compatibility with established tool management systems. This compactness aids accessibility on crowded machines and supports efficient tool changes during shift work. Clear compatibility and practical application notes The holder is specified for use with CCMT 1204 indexable inserts, enabling quick insert swaps and established cutting strategies. The M12 clamping thread provides a robust mechanical interface for the clamp screw, ensuring secure seating of the insert pocket. As an entry in Teknik Makina’s turning portfolio, the unit supports standard workshop workflows where straightforward, reliable toolholding is required and where ISO‑specified components simplify inventory and replacement planning. For reliable right‑hand turning choose Teknik Makina’s SCLCR 2525 — contact Metav Werkzeuge in Emmerich for technical advice and order support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: D403-1TM Brand: Teknik Makina Article: SCLC for CCMT Indexable Inserts (SCLCR 2525) Cutting direction: right Facts Overall length: 150 mm Cutting height: 25 mm Cutting head width: 32 mm Shank width: 25 mm Weight: 0.768 kg Cutting angle: 95° Special features Compatible inserts: CCMT 1204 Clamping thread: M12 ISO designation: SCLCR 2525 Right‑hand external turning configuration FAQ What insert type does this toolholder accept? The holder accepts CCMT 1204 indexable inserts; the design and pocket geometry are matched to that insert format for reliable seating and repeatable milling edges. Is this a right‑hand or left‑hand holder? This is specified as a right‑hand turning toolholder; the geometry and cutting angle are arranged for right‑hand external turning operations. Which clamping screw is required for installation? The clamping interface uses an M12 thread for the clamp screw, ensuring firm fixation of the insert carrier. What is the overall length and mass of the toolholder? The toolholder has an overall length of 150 mm and a mass of 0.768 kg, providing a compact, easy‑to‑mount solution for conventional tool posts and turrets. How is the product identified for spare‑part ordering? Reference the ISO designation SCLCR 2525 and SKU D403-1TM when ordering or checking compatibility to ensure the correct holder is supplied. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter SRDCN 2020 K10 For RCMT 1003 Indexable Inserts Innenkühlung Neutral - Teknik Makina
Take advantage of secure clamping and precise compatibility with RCMT inserts for stable turning operations; the compact dimensions and standard ISO designation support easy integration into existing tool setups. Order or request technical advice directly via Metav Werkzeuge to ensure optimal selection and rapid delivery. Clamp holder SRDCN for RCMT indexable inserts (D272TM) – neutral cutting Clamp holder SRDCN for RCMT indexable inserts (D272TM) designed for turning applications with RCMT 1003 indexable inserts; suitable where neutral cutting direction and compact, rigid tooling are required. SRDCN for RCMT 1003 inserts Neutral cutting direction Head width 10 mm, shank 20 mm Overall length 125 mm, weight 0.37 kg Engineered for reliable clamping and steady machining This clamp holder is built to deliver clamping reliability in repetitive turning tasks. Compatible with RCMT 1003 indexable inserts, the SRDCN interface secures the cutting tip with minimal play, reducing vibration and improving surface finish. The neutral cutting configuration balances cutting forces, which helps to maintain consistent tool life and predictable chip formation. For workshop managers and machinists seeking repeatable results, the holder provides a straightforward mechanical solution that reduces rework and supports efficient production cycles. Compact format that supports flexible toolpaths and rigidity Compact dimensions give this holder an advantage where access and stiffness matter: the 10 mm head width and 20 mm shank width combine with a 125 mm overall length and a cutting height of 35 mm to offer a low-profile yet rigid mounting. With a mass of 0.37 kg, the toolholder imposes limited inertial load on turrets and toolposts while still contributing meaningful rigidity for finishing and light- to medium-turning operations. These proportions enable closer approach to workpieces and easier tool sequencing in multi-tool setups without compromising stability. Straightforward integration, serviceability and workshop compatibility Designated SRDCN 2020, the holder follows established ISO-style conventions for indexable tooling, which simplifies replacement and inventory management. The form factor supports a quick insert change workflow and standard fastening procedures, keeping maintenance intervals short and downtime minimal. By fitting common RCMT inserts and using a neutral geometry, the component helps maintain precision across batches and is suitable for both retrofit and new tool assemblies. Its proven mechanical simplicity makes it a pragmatic choice for production lines and jobbing shops alike. Request a tailored compatibility check or technical drawing from Metav Werkzeuge for this Teknik Cutting Tools clamp holder – Metav Werkzeuge can advise on turret fitment and delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: D272TM Manufacturer: Teknik Makina Designation: SRDCN for RCMT Indexable Inserts Facts Overall length: 125 mm Head width: 10 mm Shank width: 20 mm Shank height: 20 mm Cutting height: 35 mm Weight: 0.37 kg Special features ISO designation: SRDCN 2020 For indexable inserts: RCMT 1003 Cutting direction: neutral Suitable for turning applications FAQ What inserts does this clamp holder accept? The clamp holder accepts RCMT 1003 indexable inserts; the SRDCN interface is matched to that insert format for secure seating and repeatable positioning. Is the cutting direction fixed or reversible? The toolholder is specified for a neutral cutting direction, providing balanced cutting forces suitable for many turning tasks. What are the key dimensions to check for turret mounting? Check the 125 mm overall length, 20 mm shank width and 20 mm shank height against the turret clearance; these dimensions define fit and reach. How does the SRDCN 2020 designation affect spare parts? The SRDCN 2020 designation indicates the holder conforms to a common interface standard for this style, simplifying spare procurement for compatible RCMT insert tooling. Can this holder be used for finishing operations? Yes, the combination of compact form and solid clamping makes it suitable for finishing and light- to medium-duty turning tasks with the correct insert grade. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Precision coolant delivery for demanding turning operations
Tool holders with internal coolant are precision components used in machining, particularly turning, to hold indexable inserts securely and feed them to the workpiece. Also referred to as through-coolant tool holders or internal coolant toolholders, these systems channel coolant directly to the cutting edge to reduce thermal load and improve chip control in heavy or high-speed machining.
How they work and where they help most
Standard holders without internal coolant rely on external nozzles, which can be blocked by chips and fail to reach the insert tip reliably. In contrast, holders with internal coolant contain integrated coolant channels and boreholes in the tool shank that guide the coolant under pressure straight to the insert. This targeted supply is particularly valuable for difficult-to-machine materials, high cutting speeds, deep cuts and internal turning where conventional coolant delivery struggles.
Key facts
| characteristic | detail |
|---|---|
| category | tool holders with internal coolant |
| common synonyms | internal coolant toolholders; coolant-through tool holders |
| typical application | turning, heavy machining, internal bore finishing |
| coolant routing | internal channels and boreholes delivering coolant to the insert seat |
| key technical effect | direct cooling at the cutting edge, improved chip evacuation, reduced thermal load |
| comparison | standard holders use external nozzles; internal coolant holders route coolant through the shank |
Measurable benefits for production
- Direct coolant feed reduces the thermal stress on the insert, extending tool life.
- Improved pressure at the cutting zone enhances chip evacuation, reducing recutting and tool damage.
- More consistent cooling helps achieve better surface finish and dimensional stability.
- Reliable coolant delivery under challenging chip conditions supports higher cutting speeds and heavier cuts.
Metav: precision supply and industrial competence
Metav positions itself as the practical partner for workshops and production: a European quality filter based in Emmerich that combines broad product availability with technical expertise. With over 48,000 customers and more than 250,000 products, Metav supplies through-coolant tool holders and related accessories with dependable logistics and application guidance, making sophisticated cooling solutions accessible for every workshop.
In short
Tool holders with internal coolant deliver targeted, high-efficiency coolant to the insert tip, improving chip control, tool life and surface quality in demanding turning tasks.
FAQ
When should I choose tool holders with internal coolant over standard holders?
Choose tool holders with internal coolant when external coolant nozzles cannot reliably reach the cutting edge, for deep cuts, internal turning, heavy machining or when machining difficult materials at high speeds. The internal coolant toolholders ensure direct cooling and better chip evacuation in these scenarios.
Can internal coolant toolholders be used with all insert types?
Internal coolant toolholders are compatible with most indexable inserts provided the holder and insert interface are specified for coolant-through operation. Verify seat type and manufacturer recommendations for coolant-through compatibility.
What performance improvements can I expect from coolant-through tool holders?
Typical improvements include longer tool life, fewer interruptions from clogged external nozzles, improved chip control and a more consistent surface finish due to reduced thermal distortion at the cutting edge.
How is coolant delivered inside an internal coolant toolholder?
Coolant is channelled through boreholes and internal passages in the tool shank directly to the insert pocket; this focused path creates sufficient pressure at the cutting edge to flush chips away and cool the insert effectively.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com