High-precision clamping holders with internal coolant for extended tool life
Clamping holders with internal coolant are designed to secure indexable inserts accurately while delivering coolant directly to the cutting edge, reducing thermal load and improving chip evacuation in demanding metalworking operations. Used for turning and internal machining of tough materials, these holders channel the coolant through built-in boreholes to the insert and beneath the chip, which boosts tool life and enhances surface finish. As a reliable system solution, the combination of clamping holder, internal coolant and indexable insert ensures consistent performance at high cutting speeds and under heavy cut conditions.
Klemmhalter 93° SVJBR 1010 J11-F for VBMT 1103 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
The combination of precise compatibility with VBMT 1103 inserts, a compact 110 mm overall length and a rigid clamping design ensures fast setup and consistent turning results; order the toolholder directly via Metav Werkzeuge or consult the technical advisors if further matching is required Clamping holder (SVJB for VBMT indexable inserts) — right-hand, SVJBR 1010 by Teknik Makina A Clamping holder (SVJB for VBMT indexable inserts) engineered for right-hand turning with VBMT 1103 inserts, tailored for reliable finishing and general turning operations Compact 110 mm overall length Compatible with VBMT 1103 inserts Right-hand cutting, 93° cutting angle Precision clamping, weight 0.098 kg Stable clamping for consistent surface quality The holder delivers a rigid clamping solution that reduces vibration and improves repeatability in serial production. By accepting VBMT 1103 indexable inserts and featuring an SVJBR 1010 ISO designation the tool balances accessibility and precision: the compact 110 mm overall length and a reduced cutting-head footprint (10 mm) allow close tool spacing on multi-station turrets. For operators this means fewer rejects and shorter setup times, as the combination of defined seating and secure clamp retention maintains insert position across multiple shifts. Optimised geometry for predictable cutting performance A defined cutting angle of 93° and right-hand orientation provide predictable chip flow and tool engagement for common turning tasks. The clamping head dimensions (10 mm width / 22 mm cutting height) are matched to standard insert geometry, helping to achieve stable cutting forces and improved surface finish in light- to medium-duty operations. The holder’s low mass (0.098 kg) reduces inertial effects during rapid indexing, while the shank designation J11-F ensures compatibility with a wide range of tool posts and adaptors commonly used in workshop environments. Practical integration and workshop benefits Designed as a straightforward replacement or upgrade, the toolholder integrates into existing turning setups with minimal adjustments. The combination of standardised insert compatibility and compact dimensions supports efficient tool inventory management and faster changeovers on production lines. For procurement and maintenance teams, the holder offers a pragmatic balance between robustness and accessibility, backed by Teknik Makina’s manufacturing standards and Metav Werkzeuge’s supply chain reliability from Emmerich. For reliable integration and fast supply of the Teknik Makina SVJBR 1010 clamping holder, request technical matching and stock information from Metav Werkzeuge at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: D128TM Manufacturer: Teknik Makina Designation: SVJB for VBMT Indexable Inserts ISO designation: SVJBR 1010 SKU: D128TM Facts Overall length: 110 mm Holder width: 10 mm Cutting-head width: 10 mm Holder height: 10 mm Cutting height: 22 mm Weight: 0.098 kg Cutting angle: 93° Cutting direction: right Special features Suitable for VBMT 1103 inserts Shank designation J11-F Right-hand turning application Compact footprint for multi-station turrets Precision clamping for repeatable seating FAQ What inserts fit this holder? The holder is designed for VBMT 1103 indexable inserts; Teknik Makina’s SVJBR 1010 geometry provides defined seating and clamping for that insert form. Is the holder right- or left-hand? This toolholder is a right-hand clamping holder intended for conventional right-hand turning operations. What are the key dimensions to check for compatibility? Primary dimensions include the 110 mm overall length, 22 mm cutting height and 10 mm head width; the shank designation J11-F is relevant for toolpost compatibility. Can this holder be used on multi-station turrets? Yes, the compact footprint and standardised seating make the holder suitable for multi-station turret arrangements and tight tool spacing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJBR 1010 J11-IK for VBMT 1103 Indexable Inserts Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of the combination of precision clamping, internal coolant support and a compact 10 x 10 mm shank for reliable turning operations; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. SVJBR 1010 Klemmhalter – SVJB for VBMT indexable inserts, internal coolant, 93° cutting angle (Teknik Makina) The SVJBR 1010 is a right‑hand clamping holder designed for turning with VBMT‑style indexable inserts, offering a compact shank and integrated coolant support for stable, repeatable machining across industrial setups. Right-hand turning holder SVJBR 1010 Internal coolant for stable cooling Compact shank 10 x 10 mm 93° cutting angle for accurate profiling Consistent clamp force for repeatable turning quality The clamping unit is engineered to deliver consistent clamp force, preserving insert position even under intermittent heavy cuts. The combination of a sturdily dimensioned cutting head and a reliable fixing screw provides a measurable reduction in run‑out and chatter. With a 93° cutting angle and robust clamping geometry, the holder promotes predictable tool behaviour and improved surface finish on turned components, which supports process stability and reduces scrap rates. Integrated coolant to extend insert life and reduce rework Featuring internal coolant, the holder channels fluid directly to the cutting zone to lower temperatures and flush chips away from the edge. Targeted cooling reduces thermal wear on the insert and can extend edge life considerably, especially in continuous production. The internal channel also improves chip control during profile turning, which translates into fewer tool changes and less downstream rework — a clear efficiency gain for batch and single‑part production alike. Space-saving format for flexible machine set-ups Designed with a compact shank 10 x 10 mm and a cutting head width of 12 mm, this toolholder fits tightly packed turrets and small tool posts without compromising rigidity. The 110 mm overall length and low mass of 0.097 kg make it suitable for machines with limited clearance while keeping centrifugal and vibration effects low. The right‑hand orientation and modest footprint enable straightforward integration into existing tool cycles, improving accessibility for close‑tolerance operations. Practical maintenance and secure fastening for industrial use Maintenance is simplified by the standard Torx M2.5x6.5 screw (Torx key T8), which ensures a secure, repeatable clamp every time an insert is changed. The holder accepts VBMT‑style indexable inserts, allowing quick edge swaps and low setup times. Constructed for daily workshop use, the clamping unit combines straightforward handling with features that favour long‑term productivity and predictable tooling costs in serial turning applications. Contact Metav Werkzeuge for tailored tooling recommendations and order the Teknik Makina SVJBR 1010 through our Emmerich warehouse; phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for rapid assistance and delivery coordination Technical data Article number: AP540TM Manufacturer: Teknik Makina Product: SVJB for VBMT indexable inserts ISO designation: SVJBR 1010 Facts Shank width: 10 mm Holder height: 10 mm Cutting head width: 12 mm Cutting height: 30 mm Overall length: 110 mm Weight: 0.097 kg Cutting angle: 93° Orientation: right‑hand Screw: M2.5x6.5 Torx key: T8 Special features Internal coolant channel Compatibility: VBMT‑style indexable inserts Compact design for tight turrets Secure Torx fastening for repeatable clamp FAQ Which inserts fit this holder? The holder is designed for VBMT‑style indexable inserts; the SVJBR 1010 accepts standard VBMT insert geometries used in turning applications. Is there a left‑hand version available? This entry describes the right‑hand SVJBR 1010; for left‑hand alternatives, Teknik Makina offers corresponding variants — check Metav Werkzeuge for availability. How is coolant delivered to the cutting edge? Coolant is supplied via an internal coolant channel in the holder, directing fluid to the insert rake face to aid cooling and chip evacuation. What tool is required to change the insert screw? A Torx key size T8 is specified for the M2.5x6.5 screw to ensure secure and repeatable clamping when changing inserts. Can this holder be used on compact lathes with limited turret space? Yes — the compact shank 10 x 10 mm and modest overall length make the holder suitable for tight tool posts and small turrets where space is restricted. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJBR 1212 J11 for VBMT 1103 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Benefit from secure clamping for VBMT 1103 inserts, precise right-hand cutting geometry and a compact 110 mm overall length that supports stable, repeatable turning. Order the SVJB clamping holder directly via Metav Werkzeuge or ask our consultants if needed. SVJB Clamping Holder — SVJBR 1212 for VBMT 1103, right-hand (Teknik Makina) The SVJB Clamping Holder is a right-hand toolholder designed for VBMT 1103 indexable inserts, providing robust clamping and consistent results in industrial turning applications Right-hand cutting orientation Fits VBMT 1103 indexable inserts Compact overall length 110 mm Precise SVJBR 1212 ISO clamping design Improved process stability through precise insert clamping The holder’s clamping geometry is engineered to give repeatable insert locational accuracy, which reduces variability between parts and shortens setup time. Compatibility with VBMT 1103 indexable inserts means standardised tooling can be used across multiple machines, lowering inventory complexity. The right-hand cutting orientation and a near‑right 93° cutting angle support predictable chip flow and consistent tool engagement, helping to sustain surface finish and extend insert life. Compact form factor that enhances rigidity and toolpath control A reduced overhang directly improves stiffness at the cutting edge. With an overall length of 110 mm, a head width of 16 mm and a holder height of 12 mm, the design minimises vibration and deflection under load. The modest mass of 0.141 kg contributes to quick tool changes and reduced toolholder inertia on live tooling. Those dimensional choices translate into steadier toolpaths, better dimensional accuracy and fewer reworks when turning medium‑duty components. Straightforward installation and production-ready compatibility The toolholder follows the SVJBR 1212 ISO designation and mounts on a J11-style shank, allowing simple integration into existing turret systems without custom adapters. Right-hand orientation is clearly specified on the product and the holder accepts VBMT 1103 inserts, so selection is intuitive for purchasing and shop-floor teams. For engineers new to indexable systems, the clamping principle is easy to verify: the insert seats into a defined pocket and is secured by a clamping screw, ensuring reproducible seating and safe cutting under typical turning feeds and speeds. For availability, tool-matching advice or to request a technical drawing for the SVJB clamping holder from Teknik Makina, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com — our consultants will assist with application details and supply options Technical data Article number: D232TM Manufacturer: Teknik Makina Product name: SVJB Clamping Holder (SVJBR 1212) Facts Overall length: 110 mm Cutting height: 21 mm Holder height: 12 mm Head width: 16 mm Holder width: 12 mm Weight: 0.141 kg Cutting angle: 93° Special features Compatible inserts: VBMT 1103 Cutting direction: right Shank designation: J11 ISO designation: SVJBR 1212 FAQ What inserts does this clamping holder accept? The clamping holder is specified for use with VBMT 1103 indexable inserts and secures them in the SVJBR 1212 pocket for stable turning operations. Is the toolholder suitable for left-hand turning? This toolholder is manufactured with a right-hand cutting orientation; left-hand operations require the corresponding left-hand version. How does the compact length affect machining performance? A compact overall length of 110 mm reduces overhang and increases rigidity, which improves dimensional accuracy and surface finish in routine turning tasks. Can the holder be mounted on standard turrets? Yes. The holder uses a J11-style shank interface and an ISO SVJBR 1212 pocket, enabling straightforward mounting on compatible turret systems. Where can technical drawings or compatibility data be requested? Technical drawings and additional compatibility details are available from Metav Werkzeuge; they can provide data sheets and help match the holder to specific machines. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJBR 1212 J11-F-IK for VBMT 1103 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of secure clamping, integrated coolant and a compact 12 x 12 mm profile for consistent right‑hand turning results; order the SVJB for VBMT Indexable Inserts directly via Metav Werkzeuge or ask our consultants if needed. Klemmhalter — SVJB for VBMT Indexable Inserts (Teknik Makina) with internal coolant, 12 x 12 mm A Klemmhalter engineered for stable right‑hand turning operations, compatible with VBMT 1103 indexable inserts and designed for easy workshop integration Internal coolant channel included Compatible with VBMT 1103 inserts Right-hand cutting, 93° cutting angle Compact 12 x 12 mm clamping profile Precise clamping for repeatable turning results The compact clamping cross‑section delivers focused rigidity where it matters: a 12 x 12 mm clamping profile combined with the ISO designation SVJBR 1212 ensures repeatable seating and minimal deflection during interrupted cuts. With a defined cutting angle of 93°, the holder stabilises insert engagement and reduces chatter, which directly improves surface finish and dimensional consistency on turned parts. The measured mass of 0.11 kg aids rapid tool changes without compromising stability. Coolant supply and insert compatibility that extend tool life Integrated internal coolant directs cutting fluid close to the cutting edge, supporting thermal control and efficient chip evacuation. Compatibility with VBMT 1103 indexable inserts makes the holder suitable for a wide range of turning tasks, from roughing to semi‑finishing. Targeted coolant flow reduces flank wear and helps maintain cutting geometry, which in turn extends insert life and lowers overall cycle costs. The right‑hand orientation is set for conventional turning centres and lathes. Workshop‑ready design for fast maintenance and secure clamping The holder is finished as a flat execution with a total length of 110 mm and a practical cutting‑head width of 12 mm, providing a compact footprint in tool blocks. Fixing uses a Torx M2.5x6.5 screw and requires a T8 key, enabling quick insert changes and repeatable torque application. The combination of a low‑profile design and standardised fastening reduces set‑up time and integrates smoothly into existing tool systems, improving throughput without added complexity. For Teknik Makina reliability and integrated coolant performance, contact Metav Werkzeuge in Emmerich for procurement advice and fast delivery from stock (+49 2822 7131930, info@metav-werkzeuge.com) Technical data Article number: AP548TM Manufacturer: Teknik Makina Dimensions & key figures Clamping width: 12 mm Clamping height: 12 mm Cutting-head width: 12 mm Cutting height: 32 mm Total length: 110 mm Total height: 12 mm Weight: 0.11 kg Cutting angle: 93° Features & compatibility Internal coolant Compatible with VBMT 1103 inserts Right-hand cutting direction Torx screw: M2.5x6.5 Torx key size: T8 ISO designation: SVJBR 1212 FAQ Which insert types fit this holder? The Klemmhalter is specified for VBMT 1103 indexable inserts and accepts standard VBMT geometry for turning applications. Is there coolant delivery to the cutting edge? Yes, the SVJB holder includes an internal coolant channel that feeds lubricant towards the insert for improved cooling and chip control. What are the clamping dimensions and designation? Clamping dimensions are 12 x 12 mm with the ISO designation SVJBR 1212, matching standard toolholder specifications. Which cutting direction is supported? The holder is configured for right‑hand cutting direction, designed for conventional right‑hand turning operations. What fastener and key are required for insert clamping? Fixing is by a Torx M2.5x6.5 screw; a T8 Torx key is used for tightening and removal. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJBR 1616 H11-F-IK for VBMT 1103 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of robust clamping stability, integrated internal coolant and a compact 16 mm profile to maintain consistent turning performance and reduced setup time; Order the SVJB clamp holder directly via Metav Werkzeuge or ask our consultants if needed. SVJB for VBMT Indexable Inserts clamp holder — internal coolant, right-hand, Teknik Makina A SVJB for VBMT Indexable Inserts clamp holder designed for right‑hand turning operations, offering a compact 16 mm profile and integrated coolant supply for reliable chip control. Internal coolant channel for coolant-through machining Compatible with VBMT 1103 indexable inserts Compact 16 mm profile for tight toolpaths Torx M2.5x6.5 clamping screw, T8 key required Consistent cutting performance through precise clamping The holder delivers stable clamping for indexable insert turning, ensuring repeatable geometry at the tool tip and minimised vibration. Designed for VBMT‑style inserts, the unit secures the cutting edge with a robust Torx M2.5x6.5 fastener and a corresponding T8 key, so insert seating remains consistent across changeovers. The 93° cutting angle is configured to support standard turning profiles while the compact cross-section preserves access in confined setups, helping to reduce cycle variation and scrap rates in batch production. Integrated coolant and user‑friendly maintenance An internal coolant channel facilitates targeted cooling and chip evacuation directly to the insert seat, improving tool life and surface finish under continuous operation. The compact 16 mm profile and 100 mm overall length make the holder suitable for close‑quarter tool layouts without compromising coolant flow. The component’s designation SVJBR 1616 and compatible bar reference H11‑F‑IK indicate standardised dimensions that simplify replacement and inventory management. Lightweight construction at 0.16 kg combines low inertia with durability for easier handling during tool changes. Workshop advantages: speed, reliability and compatibility For busy workshops the toolholder reduces downtime: standardised interface dimensions accelerate setup and the coolant‑through option cuts manual clearing of chips. Compatibility with VBMT 1103 inserts provides access to a wide range of grades and geometries for different materials, from steel to aluminium, depending on the insert chosen. The product’s concise form factor supports close tool spacing and multi‑operation turrets, while the stable clamping mechanism supports predictable tool life, improving overall throughput and process reliability. For tailored advice or ordering information from Metav Werkzeuge — including delivery from our Emmerich site and guidance on insert selection — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: AP549TM ISO designation: SVJBR 1616 Manufacturer: Teknik Makina SKU: AP549TM Core specifications Overall length: 100 mm Overall height: 16 mm Shank/head width: 16 mm Cutting height: 35 mm Cutting angle: 93° Weight: 0.16 kg Design / special features Internal coolant For VBMT 1103 indexable inserts Right‑hand cutting orientation Torx screw M2.5x6.5, T8 key Compatible toolholder designation H11‑F‑IK FAQ Which inserts are compatible with this holder? The SVJB for VBMT Indexable Inserts clamp holder is designed for VBMT 1103 inserts and accepts standard VBMT indexable cutting tips. Does the holder support coolant‑through machining? Yes, the clamping unit includes an internal coolant channel to direct cutting fluid to the insert seat. Is the toolholder for right‑hand or left‑hand turning? This version is configured for right‑hand cutting direction, suitable for conventional turning operations. What fastening hardware is used to secure the insert? Clamping uses a Torx M2.5x6.5 screw; assembly and disassembly require a T8 key. What are the key dimensions and weight of the holder? The holder has a 100 mm overall length, a 16 mm overall height and head width, with a weight of 0.16 kg and ISO designation SVJBR 1616. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJBR 1616 H16 for VBMT 1604 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, right-hand clamping solution that combines compatibility with VBMT 1604 inserts, a 93° cutting angle and a robust 100 mm overall length for steady turning performance. Order directly via Metav Werkzeuge or request tailored advice from our consultants for seamless integration into existing tool setups. Clamping holder SVJB for VBMT Indexable Inserts — right-hand holder, 100 mm overall length The Clamping holder SVJB for VBMT Indexable Inserts is a right-hand turning holder designed to accept VBMT 1604 indexable plates, offering reliable clamping and precise positioning for standard lathe operations Right-hand orientation for turning operations Compatible with VBMT 1604 indexable inserts 100 mm overall length for rigid support 16 mm holder height, 20 mm cutting-head width Stable cutting performance that reduces vibration and improves surface finish The holder is engineered to provide consistent rigidity: with an overall length of 100 mm and a cutting-head width of 20 mm, the accessory minimises chatter during interrupted cuts and helps to maintain repeatable geometry. The unit’s 93° cutting angle supports conventional turning geometries and, together with the SVJBR 1616 ISO designation, makes the tool suitable for many workshop fixtures. This combination of dimensions and geometry translates into fewer reworks and a more predictable process window when machining steel and comparable materials. Fast set-up and secure clamping to shorten cycle times Designed for standard VBMT plates, the tool holder simplifies insert changes and reduces downtime during tool swaps. The right-hand configuration aligns with common lathe set-ups and the clamping mechanism secures the insert reliably, lowering the risk of micro-movement under load. At a weight of only 0.192 kg, the holder is easy to handle without compromising stability, supporting efficient toolroom workflows and improved machine uptime. Practical suitability for industry and trade with straightforward integration As a compact turning accessory, this holder fits well into mixed-production environments and small-series production where flexibility and dependable repeatability matter. The 16 mm holder height and 33 mm cutting-edge height provide a balanced elevation for standard toolpost arrangements. For procurement and supply reliability, the product is offered through Metav Werkzeuge, whose Emmerich hub acts as a quality filter for European customers and supports predictable delivery and stock transparency. Contact Metav Werkzeuge for a specification check and procurement from Emmerich — our consultants will confirm fitment and delivery options for the Teknik Cutting Tools clamping holder (SKU D235TM) Technical data Article number: D235TM Manufacturer: Teknik Makina Designation: SVJB for VBMT Indexable Inserts ISO designation: SVJBR 1616 Facts Overall length: 100 mm Holder height: 16 mm Holder width: 16 mm Cutting-head width: 20 mm Cutting-edge height: 33 mm Cutting angle: 93° Weight: 0.192 kg Special features Compatible with VBMT 1604 indexable inserts Right-hand cutting direction Suited for conventional turning operations SVJB style clamping for indexable plates FAQ Which inserts fit this holder? The holder accepts VBMT 1604 indexable inserts; the clamping geometry is matched to the VBMT plate form for secure seating. Is the holder right-hand or left-hand? This variant is a right-hand clamping holder, intended for conventional right-hand turning directions. What is the ISO designation for the holder? The holder is specified as SVJBR 1616, which indicates its nominal shank and clamping form. What are the key dimensions to check for toolpost fitment? Relevant dimensions include the 100 mm overall length, 16 mm holder height and 20 mm cutting-head width; these determine compatibility with common toolpost arrangements. Can this holder be used for heavy interrupted cuts? The holder’s geometry and 93° cutting angle provide good rigidity for typical interrupted cuts within the limits of the machine and insert capability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJBR 2020 K16 for VBMT 1604 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of the holder’s VBMT 1604 compatibility and precise 93° cutting angle for repeatable turning operations; the compact 125 mm length and robust clamping deliver stable, low-vibration machining. Order directly via Metav Werkzeuge or consult our technical team for application-specific advice. Klemmhalter SVJB — SVJBR 2020 turning holder for VBMT 1604, right-hand (Teknik Makina) The Klemmhalter SVJB is a right-hand turning holder engineered to accept VBMT 1604 indexable inserts, providing a compact and rigid solution for external turning tasks on standard lathes and turning centres. SVJBR 2020 ISO designation Compatible with VBMT 1604 inserts Right-hand holder, 93° cutting angle 125 mm overall length, robust clamping Precision and compatibility for consistent turning results The SVJBR 2020-design holder is built around proven geometry so that indexable inserts seat consistently and produce predictable tool paths. With support for VBMT 1604 inserts the toolholder allows shops to use a widely available insert format, reducing changeover time and inventory complexity. The 93° cutting angle gives a balanced cutting edge orientation that suits many external turning tasks; this contributes directly to dimensional consistency and longer tool life under steady cutting conditions. Secure clamping that reduces vibration and rework The clamping arrangement and compact mass ensure a stable tool zone during cuts. With an overall length of 125 mm and a mass of 0.382 kg, the holder limits overhang and helps to keep modal vibration low, which is beneficial when aiming for fine surface finish and tight tolerances. The toolholder’s structural dimensions — 20 mm holder height and 25 mm cutting-head width — are matched to common toolposts, offering a rigid platform for the insert and helping to avoid chatter-related rejects. Easy integration into existing turning setups Marked as SVJBR 2020 to conform with standard ISO-style designations, the holder integrates straightforwardly with existing tool posts and clamping systems. The version supplied is configured for right-hand cutting direction, so set-up is intuitive for typical external turning operations. The holder accommodates the usual insert clamping sequence, enabling quick insert indexing or replacement without lengthy adjustments — a practical advantage in production and maintenance workflows. Ideal applications and who benefits most This toolholder is well suited to CNC small-batch production, general workshop turning and maintenance operations where standardised inserts and reliable repeatability are priorities. The compact profile is especially useful where space at the toolpost is limited, while the compatibility with common insert geometry reduces stocking complexity. The K16 shank/connection designation supports mounting options found in many tool systems, making the holder a flexible addition to an efficient turning toolbox. Contact Metav Werkzeuge today for application recommendations or to order the Teknik Makina SVJB toolholder (SKU D236TM) through our Emmerich team — technical consultation is available to ensure perfect fitment for the intended turning task. Technical Data Article number: D236TM Manufacturer: Teknik Makina Type designation: SVJBR 2020 For inserts: VBMT 1604 Facts Overall length: 125 mm Weight: 0.382 kg Holder height: 20 mm Holder width: 20 mm Cutting-head width: 25 mm Cutting height: 33 mm Cutting angle: 93° Cutting direction: Right Shank/boring designation: K16 Special features Compatibility with VBMT 1604 indexable inserts ISO-style designation SVJBR 2020 Compact, rigid design for reduced vibration Suitable for standard external turning applications FAQ Which inserts fit this holder? The holder is designed for VBMT 1604 indexable inserts; this format fits the clamping pocket and geometry of the SVJBR 2020 toolholder. Is the SVJB holder for right- or left-hand turning? This SVJB variant is configured for right-hand cutting direction, suitable for standard external turning on most lathes. What are the key mounting dimensions? Key dimensions include an overall length of 125 mm, holder height 20 mm and cutting-head width 25 mm, which support stable mounting in common toolpost systems. Can the holder be used in high-volume production? Yes; the robust clamping and compact profile make the holder appropriate for repetitive production where consistent insert seating and low vibration are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJBR 2525 M16 for VBMT 1604 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a robust, precision-built clamping solution that combines compatibility with VBMT 1604 inserts, a right-hand cutting geometry, and compact dimensions for reliable turning cycles; order directly via Metav Werkzeuge or consult the technical team for assistance. Klemmhalter SVJB for VBMT Indexable Inserts — right-hand turning holder with ISO SVJBR 2525 Klemmhalter SVJB for VBMT Indexable Inserts is a right-hand toolholder designed for secure mounting of VBMT 1604 indexable inserts in routine and precision turning applications Compatible with VBMT 1604 inserts Right-hand cutting geometry ISO designation SVJBR 2525 M16 mounting thread for secure clamping Precision and rigidity for repeatable turning The Klemmhalter SVJB for VBMT Indexable Inserts is engineered to provide mechanical stability during interrupted and continuous cuts. With an overall length of 150 mm and a solid construction weighing 0.688 kg, the holder minimises vibration and deflection, which directly improves surface finish and prolongs insert life. The ISO designation SVJBR 2525 indicates a standardised interface that simplifies tool setup and inventory management across production cells. Designed for right-hand operations, the geometry supports predictable chip flow and consistent tool engagement. Dimensions and mounting that streamline workshop setup Key dimensions are arranged to make integration straightforward: a holder width of 25 mm, a head width of 32 mm, and a cutting height of 40 mm ensure correct insert positioning and stable cutting conditions. The shank is specified with an M16 mounting designation, enabling secure fixture in compatible tool turrets or adaptors. The holder’s cutting angle of 93° accommodates common turning profiles while keeping the insert clamped in a controlled orientation. These physical specifications are selected to reduce setup time and to maintain alignment accuracy across repeated operations. Clear application advantages for production and maintenance This clamping solution is intended for workshops that require dependable indexable turning performance without excessive tool changeovers. Compatibility with VBMT 1604 inserts allows the use of widely available grades for varied materials, making it suitable for batch production and mixed-material tasks. The right-hand orientation and concise geometry mean that the holder is suited to standard turning tasks where consistent chip evacuation and predictable tool behaviour are priorities. The compact design supports tighter tool spacing on multi-station turrets. Durable design that supports shop-floor reliability Constructed for practical use rather than gimmicks, the holder’s dimensions and form factor are chosen to deliver long-term service with minimal intervention. The balanced combination of 150 mm length, firm clamping interface and standard ISO geometry helps to reduce unexpected downtime and simplifies spare-parts management. For supply reliability and technical advice, the product is offered through Metav’s distribution network, which focuses on consistent availability and informed purchasing for industrial and trade customers. For delivery from Emmerich and application advice, contact Metav Werkzeuge — order the Teknik Makina SVJB clamping holder via Metav Werkzeuge or request detailed mounting guidance by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: D238TM Manufacturer: Teknik Makina Designation: SVJB for VBMT Indexable Inserts ISO designation: SVJBR 2525 Facts Overall length: 150 mm Cutting head width: 32 mm Holder width: 25 mm Holder height: 25 mm Cutting height: 40 mm Cutting angle: 93° Weight: 0.688 kg Special features Compatible with VBMT 1604 indexable inserts Shank designation: M16 Cutting direction: right Suitable for right-hand turning operations FAQ What inserts fit this holder? The holder is compatible with VBMT 1604 indexable inserts; the interface and clamping geometry are matched to this insert size for secure seating and consistent cutting. Is the holder suitable for left-hand turning? This variant is specified for right-hand cutting; for left-hand turning an appropriately oriented holder should be selected. What does the ISO designation SVJBR 2525 mean? The SVJBR 2525 ISO designation identifies the holder’s format and shank dimensions, simplifying selection and ensuring standardised mounting across tool systems. How does the M16 designation affect mounting? The M16 shank designation relates to the mounting thread/interface used for clamping in adaptors or turrets, ensuring a rigid connection when installed correctly. Can this holder be used in high-speed finishing operations? The holder’s rigidity and controlled geometry suit many finishing tasks; final suitability depends on the insert grade, machine capability and cutting parameters used with the VBMT 1604 insert and the holder D238TM. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJCL 1010 J11 for VCMT 1103 Indexable Inserts Innenkühlung Linksschneidend - Teknik Makina
Take advantage of a compact, left-hand clamping solution combining compatibility with VCMT 1103 inserts, precise geometry and easy integration for consistent turning results; order directly via Metav Werkzeuge or contact our consultants for application advice. Klemmhalter (SVJC for VCMT Indexable Inserts) — left-hand holder, SVJCL 1010 designation Klemmhalter designed for secure clamping of VCMT 1103 indexable inserts in turning operations, suitable for left-hand cutting tasks in workshop and production environments Left-hand clamping holder for turning Compatible with VCMT 1103 inserts Cutting edge height 21 mm SVJCL 1010 ISO designation Consistent machining and extended insert life A compact clamping design delivers stable clamping and reduced micro‑movement at the tool tip, which improves repeatability across serial turning operations. The left-hand orientation, combined with a 93° cutting angle, helps direct cutting forces into the holder body and toolpost, lowering vibrations that accelerate insert wear. Where process reliability is a priority, this approach supports longer intervals between insert changes and more predictable component tolerances, which benefits throughput and reduces scrap rates. Engineered dimensions for fast, reliable setup The holder is specified with an overall length of 110 mm, a head width of 12 mm and a cutting edge height of 21 mm, enabling straightforward fitment in common turning toolposts and tight setups. These measured dimensions make tool alignment and clearance planning simpler during machine setup. The nominal mass of 0.086 kg supports rapid tool changes with minimal impact on turret balance. The SVJCL 1010 form factor reflects an industry‑recognised geometry for indexable‑insert holders, easing inventory management and ensuring compatible spare‑part logic on the shop floor. Practical benefits for production and maintenance workflows Designed for use with VCMT 1103 inserts, the holder offers a direct compatibility route for established carbide grades and geometries, reducing the need for bespoke tooling. The compact width and height reduce interference with adjacent tools, while the clear ISO designation assists procurement and traceability. For maintenance teams and setup engineers, the familiar shank and clamping arrangement simplify replacement and calibration tasks, so machine uptime is maximised and operator handling is intuitive. For application guidance or to source Teknik Makina clamping solutions, contact Metav Werkzeuge in Emmerich for tailored advice and fast shipping via e‑mail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data SKU: D383TM Manufacturer: Teknik Makina Article designation: SVJC for VCMT Indexable Inserts ISO designation: SVJCL 1010 Shank designation: J11 Core data Overall length: 110 mm Cutting edge height: 21 mm Head width: 12 mm Holder height: 10 mm Holder width: 10 mm Cutting angle: 93° Weight: 0.086 kg Special features Suitable for VCMT 1103 inserts Left-hand cutting direction For indexable inserts and turning applications Compact form factor for tight setups FAQ Which inserts fit this holder? The Klemmhalter is designed for use with VCMT 1103 indexable inserts; this match ensures correct seating and cutting geometry for typical carbide grades. Is this holder left‑hand or right‑hand? This tool is a left‑hand clamping holder, constructed to suit left‑hand turning directions and to channel cutting forces accordingly. What is the ISO designation and why does it matter? The holder carries the SVJCL 1010 ISO designation, which describes its geometric form and compatibility; this aids in selecting matching toolholders and maintaining consistent tool inventories. Can the holder be used in compact turrets and small lathes? With an overall length of 110 mm, a head width of 12 mm and a low mass, the holder suits compact turrets and space‑constrained setups while maintaining stable clamping. What is the SKU for ordering and traceability? Order and reference this item with SKU D383TM, supplied by Teknik Makina for streamlined procurement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJCL 1212 J11-IK for VCMT 1103 Wendeplatten Innenkühlung linksschneidend - Teknik Makina
Take advantage of a stable combination of secure clamping, internal coolant and compact dimensions to ensure consistent turning results in medium-duty operations; order directly through Metav Werkzeuge or consult our specialists for application advice. Klemmhalter SVJC for VCMT Indexable Inserts (SVJCL 1212) — Teknik Makina | Left-hand, internal coolant The Klemmhalter SVJC for VCMT Indexable Inserts is a left-hand turning holder engineered for precision finishing with integrated coolant delivery for improved chip control. Left-hand turning holder for VCMT 1103 inserts Internal coolant feed for reliable chip evacuation Compact 12 x 12 mm shank with 110 mm overall length Secure clamping via M2.5x6.5 Torx screw and T8 key Consistent surface quality through coolant-assisted chip control The integrated internal coolant channel is designed to channel cutting fluid directly to the cutting edge, which reduces heat build-up and supports consistent surface finishes. By feeding coolant to the insert, chip evacuation is improved and flank wear is moderated, so process stability is increased during longer cuts. This feature is especially valuable when machining demanding workpieces where controlled cooling prolongs insert life and reduces tool-change frequency. Dependable clamping and straightforward serviceability Clamping is achieved with a precision-machined screw interface, specified as M2.5x6.5 and tightened with a T8 Torx key, which ensures repeatable seating of the indexable plate. The low-mass design, weighing 0.11 kg, minimises centrifugal load while providing a rigid hold for the VCMT 1103 insert. The screw arrangement and robust pocket geometry are designed for quick plate changes, so maintenance intervals are short and downtime is reduced. Space-efficient shank that integrates easily into toolposts With a nominal shank size of 12 x 12 mm and an overall length of 110 mm, the holder fits compact toolposts and toolblocks while offering a cutting head width of 16 mm and a cutting height of 32 mm for reliable edge engagement. The 93° cutting angle and left-hand orientation make the clamping tool suitable for conventional left-handed turning operations. Where machine clearance is limited, the compact footprint supports flexible setup without sacrificing stability. Application-focused compatibility and mounting The turning tool is supplied in the ISO designation SVJCL 1212, intended for use with standard tool bars such as J11-IK, and accepts VCMT 1103 indexable inserts. The combination of standardised interface and coolant capability allows the holder to be integrated into existing cutting systems with minimal adaptation. For shops aiming to streamline tooling, the holder supports proven insert geometries and simplifies stocking. Contact Metav Werkzeuge to confirm fitment with existing toolholders and to reserve the Teknik Cutting Tools SVJCL 1212 left-hand clamping holder with internal coolant through our Emmerich service team. Technical data Article number: AP529TM Manufacturer: Teknik Makina Shank width: 12 mm Shank height: 12 mm Cutting head width: 16 mm Cutting height: 32 mm Overall length: 110 mm Overall height: 12 mm Weight: 0.11 kg Cutting angle: 93° Cutting direction: left ISO designation: SVJCL 1212 Compatible inserts: VCMT 1103 Toolbar designation: J11-IK Coolant: internal coolant feed Clamping screw: M2.5x6.5 Torx key: T8 SKU: AP529TM FAQ Which indexable inserts are suitable for this holder? The holder is designed for VCMT 1103 indexable inserts; the pocket and seat geometry match that insert family to ensure correct edge alignment. Does the AP529TM include internal coolant delivery? Yes, the AP529TM clamping holder is equipped with an internal coolant feed directed toward the insert seat for improved chip control. What screw and key are required for clamping? Clamping uses an M2.5x6.5 Torx screw, tightened with a T8 key, providing a secure and repeatable clamping action for the SVJCL 1212 pocket. Is this a left-hand or right-hand holder? This tool is a left-hand turning holder, specified for operations where left-hand cut direction is required. What are the key dimensions for machine setup? Key setup dimensions are a 12 x 12 mm shank, 110 mm overall length, 16 mm cutting head width and 32 mm cutting height; weight is 0.11 kg. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJCL 1616 H11-F-IK for VCMT 1103 Wendeplatten Innenkühlung linksschneidend - Teknik Makina
Take advantage of a compact left‑hand clamping solution that pairs precise fit with coolant delivery — the 16 x 16 mm geometry and internal coolant reduce heat and improve tool life for stable turning operations. Order the holder directly via Metav Werkzeuge or consult our specialists for application advice. Klemmhalter SVJC for VCMT Indexable Inserts — left‑hand clamping holder with internal coolant The Klemmhalter SVJC for VCMT Indexable Inserts is a left‑hand turning holder designed for VCMT 1103 inserts, offering a compact 16 x 16 mm shank and built‑in coolant feed for secure, coolant‑assisted machining. Internal coolant for improved tool life Compatible with VCMT 1103 indexable inserts 16 x 16 mm shank for standard toolposts Left‑hand orientation for dedicated turning tasks Reliable clamping and coolant support for steady production The holder combines a firm clamping geometry with an integral coolant channel to maintain cutting temperatures and chip evacuation. The SVJCL 1616 ISO designation describes the 16 x 16 mm cross‑section and standard mounting form, ensuring consistent seating in common toolposts. By feeding coolant directly to the insert seat, the system reduces thermal load on the cutting edge and helps to extend service intervals. This design improves process stability in series turning where repeatability and minimised tool changes are key for throughput. Quick set‑up and straightforward maintenance for workshops Assembly and maintenance are simplified by the clear fastening concept: the head is secured with a M2.5x6.5 Torx screw and requires a T8 key for tightening and release. The relatively low mass (0.19 kg) and standard 100 mm overall length make handling easier during changeovers without compromising rigidity. The 93° cutting angle and 35 mm cutting height provide defined engagement geometry, which helps to predict cutting forces and optimise insert selection. Clear specification of fastening sizes and ISO designation shortens set‑up time and reduces the risk of incorrect assembly. Built for industrial use and consistent procurement Designed as a dedicated left‑hand toolholder, the component's compact 16 x 16 mm dimensions and 16 mm cutting‑head width suit compact toolposts and machines with limited space. The holder accepts VCMT 1103 inserts and is identified under SKU AP538TM, which simplifies inventory and reordering. Supplied by Teknik Makina and available via Metav Werkzeuge’s European distribution, the holder benefits from a reliable supply chain and quality control measures that support uninterrupted production. Request stock information or a technical consultation from Metav Werkzeuge for the Teknik Makina SVJC left‑hand holder with internal coolant and ensure the correct configuration for the application. Technical data Article number: AP538TM Manufacturer: Teknik Makina Product designation: SVJC for VCMT Indexable Inserts ISO designation: SVJCL 1616 Facts Shank width: 16 mm Shank height: 16 mm Cutting‑head width: 16 mm Cutting height: 35 mm Overall length: 100 mm Overall height: 16 mm Weight: 0.19 kg Cutting angle: 93° Special features Internal coolant Compatible with VCMT 1103 inserts Left‑hand cutting direction Torx screw M2.5x6.5 Torx key T8 required Bohrstangen designation: H11‑F‑IK FAQ Which inserts fit this holder? The holder is designed for VCMT 1103 indexable inserts; the seat and clamp geometry match the VCMT 1103 form for secure indexing. How is coolant delivered to the cutting zone? Coolant is supplied through the holder’s built‑in channel so that the fluid reaches the insert seat directly, improving heat control and chip evacuation. What is the required fastening hardware and tool size? The clamping screw is M2.5x6.5 and is tightened or released with a T8 Torx key. Is this holder suitable for left‑hand machining only? Yes, the design specifies a left‑hand cutting orientation and is intended for left‑hand turning operations. What are the key dimensions for mounting and compatibility? The holder uses a 16 x 16 mm shank and a 100 mm overall length, matching standard compact toolposts and simplifying replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJCL 1616 H11-IK For DCMT 11T3 Indexable Inserts Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, coolant-fed turning solution that combines secure clamping, simple setup and consistent chip control for smoother production runs; order directly via Metav Werkzeuge or consult our specialists for application advice. Klemmhalter SVJCL 1616 — SVJC for VCMT / DCMT indexable inserts, right-hand, coolant-fed The Klemmhalter SVJCL 1616 is a right-hand turning holder designed for VCMT and DCMT style indexable inserts, offering a coolant-fed clamping arrangement for reliable chip evacuation in industrial turning operations. Right-hand turning holder with coolant feed Compatible with DCMT 11T3 / VCMT inserts Overall length 150 mm, compact design Torx screw M2.5x6.5 and T8 key for secure clamping Solid clamping and precise positioning for consistent machining A robust clamping concept ensures the insert remains stable under cutting forces: the SVJCL 1616 is engineered with a defined cutting geometry and a 93° approach angle that promotes predictable tool behaviour. With a cutting height of 35 mm and a compact head width of 32 mm, the holder keeps the insert datum close to the workpiece for repeatable results. The measured mass of 0.735 kg gives the assembly inertia that helps resist vibration without adding unnecessary bulk, supporting higher process stability on conventional and CNC lathes alike. Coolant-fed seat for better chip control and tool life Internal coolant is integrated into the clamping body to direct coolant towards the cutting zone, improving chip evacuation and reducing heat build-up at the cutting edge. The internal coolant provision reduces thermal load on the insert and can extend edge life in medium-duty turning cycles; it also helps maintain surface integrity by flushing chips away from the tool-workpiece interface. For workshops aiming for steady cycle times and fewer unscheduled indexings, the coolant-fed arrangement is a practical efficiency measure. Fast setup and secure fastening for reduced downtime Maintenance and index changes are simplified by the clear fastener specification: the clamping screw is M2.5x6.5 and is tightened with a Torx T8 key, a widely available combination in production environments. The ISO designation SVJCL 1616 and the corresponding shank notation H11-IK make toolholding identification straightforward during setup and reordering. The compact overall length of 150 mm shortens overhang, while the 25 mm body height and 25 mm body width keep the holder easy to clamp in many turret and tooling block geometries. Application focus: turning with indexable inserts This holder is tailored for turning operations using triangular indexable inserts such as DCMT 11T3 and equivalent VCMT shapes, offering a practical solution for facing and light to medium external turning passes when used in a right-hand orientation. The toolholder’s geometry and coolant capability support a variety of workshop tasks where repeatability and chip management are priorities. For integrators and production managers, the holder represents a small, well-defined component that fits into broader tooling strategies without overstating capability. For application advice or to secure supply of the Teknik Makina SVJCL 1616, contact Metav Werkzeuge in Emmerich by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com — technical consultation and rapid delivery options are available Technical data Article number: AP530TM Manufacturer: Teknik Makina Facts Overall length: 150 mm Weight: 0.735 kg Cutting height: 35 mm Holder height: 25 mm Holder width: 25 mm Cutting head width: 32 mm Cutting angle: 93° Special features Internal coolant: yes Compatible inserts: DCMT 11T3 / VCMT ISO designation: SVJCL 1616 Shank designation: H11-IK Cutting direction: right Screw: M2.5x6.5 Torx key: T8 SKU: AP530TM FAQ Which insert types are compatible with this turning holder? The turning holder accepts triangular indexable inserts in the DCMT 11T3/VCMT family; the clamping geometry is matched to those insert sizes for secure seating and repeatable positioning. Does the toolholder provide coolant to the cutting edge? Yes, the holder features internal coolant supply directed towards the insert seat to improve chip flushing and thermal control during operation. What fastener and key are required for insert clamping? Clamping is achieved with an M2.5x6.5 screw tightened using a Torx T8 key, ensuring a secure and serviceable assembly. Is this holder suitable for left-hand turning? This model is specified for right-hand cutting direction; select the corresponding left-hand version if left-hand machining is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJCL 1616 H16 For VCMT 1604 Indexable Inserts Innenkühlung Linksschneidend - Teknik Makina
Take advantage of a compact, ISO‑compliant holder that pairs with standard triangular inserts to deliver consistent turning results; the secure clamping mechanism and precise geometry reduce set‑up time and scrap rates. Order the clamping holder directly via Metav Werkzeuge or consult our specialists for technical guidance. Klemmhalter – SVJC for VCMT indexable inserts, left‑hand, SVJCL 1616 by Teknik Makina Klemmhalter is a left‑hand clamping holder designed for turning with VCMT 1604 indexable inserts, suited for industrial and workshop turning applications SVJCL 1616 profile for secure insert retention Compatible with VCMT 1604 indexable inserts Left‑hand cutting direction, 93° cutting angle Robust 100 mm overall length with 20 mm head width Consistent part quality through accurate geometry The holder’s defined interface for VCMT 1604 inserts and its SVJCL 1616 ISO profile ensure repeatable insert positioning, which translates into uniform chip formation and dimensional stability. With a 33 mm cutting height and a 93° cutting angle, the toolholder supports predictable tool engagement and turning behaviour. This measurable geometry reduces variation between setups and helps maintain process capability on serial production runs. Faster setup and less machine downtime A clear shank designation (H16) and an overall length of 100 mm make the holder straightforward to mount and align in standard tool posts or boring bars. The compact dimensions—20 mm head width and 16 mm shank cross‑section—allow rapid clamping and easier handling, shortening fixture time. For operations where changeover speed and throughput matter, the combination of defined ISO form and modest weight (0.195 kg) contributes directly to higher machine availability and lower labour time per operation. Secure clamping for uninterrupted performance The clamping concept delivers a stable mechanical connection between insert and holder, limiting micro‑movement under cutting loads and thus extending insert life per edge change. Low mass and compact design support minimised vibration without compromising stiffness, aiding surface finish and tolerances. For workshops and production cells seeking robust tooling that integrates with common triangular inserts, this holder is a pragmatic choice that balances durability with manoeuvrability. For precise turning with triangular VCMT inserts, contact Metav Werkzeuge for ordering and tailored application advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the SVJCL 1616 option and compatibility with existing toolposts. Technical data SKU: D388TM Article: SVJC for VCMT Indexable Inserts (bezeichnung_2_en) ISO designation: SVJCL 1616 Facts Overall length: 100 mm Weight: 0.195 kg Cutting height: 33 mm Head width: 20 mm Holder height: 16 mm Holder width: 16 mm Cutting angle: 93° ECLASS: 21181004 Special features Compatible with VCMT 1604 indexable inserts Left‑hand cutting direction Shank designation H16 Suitable for turning with triangular indexable inserts FAQ Which insert type fits this holder? The holder is designed for VCMT 1604 triangular indexable inserts and secures them in the SVJCL 1616 pocket for standard turning tasks. Is the cutting direction left or right? This clamping holder is built for a left‑hand cutting direction, matching left‑hand turning setups. What are the key dimensions to check for machine compatibility? Important dimensions are the 100 mm overall length, 20 mm head width, and the shank profile H16; these determine fit in a toolpost or boring bar. Can the holder reduce setup time in production? Yes; the ISO pocket form and defined shank designation support faster mounting and repeatable alignment, which helps lower setup and changeover time. What cutting angle and cutting height are provided? The tool geometry offers a 93° cutting angle and a 33 mm cutting height, supporting stable engagement and predictable machining behaviour. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Klemmhalter 93° SVJCL 2020 K16 for VCMT 1604 Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
Robust clamping and compatibility with VCMT 1604 inserts reduce setup time and enhance process stability; the left‑hand orientation and 93° cutting angle deliver predictable chip flow and consistent finish. Secure the SVJC toolholder via Metav Werkzeuge or consult our team for application support. Klemmhalter SVJC for VCMT Indexable Inserts — left‑hand turning toolholder with 93° cutting angle (Teknik Makina) The Klemmhalter SVJC for VCMT Indexable Inserts is a left‑hand turning toolholder engineered for secure clamping of VCMT 1604 inserts in general turning and finishing operations. *Secure clamping for VCMT 1604 inserts *Left‑hand cutting direction *93° cutting angle for versatile turning *125 mm overall length, compact design Stable clamping for repeatable turning results A reliable clamping interface is central to machining repeatability. The SVJC toolholder features a precision‑machined pocket and clamping geometry that hold VCMT 1604 inserts securely, which reduces micro‑movement during cuts and leads to more consistent diameters and surface quality. With a 33 mm cutting height and an ISO designation of SVJCL 2020, the toolholder matches standard insert dimensions so that set‑ups are straightforward. The result is fewer reworks and improved process control — a clear efficiency advantage on batch and single‑piece work. Designed for efficient left‑hand operations Optimised for left‑hand turning, this holder promotes predictable chip evacuation and cutting forces when used in appropriate spindle orientations. The 93° cutting angle provides a balanced compromise between access and strength, giving a stable cutting edge for both roughing and finishing passes. Engineers benefit from reduced tool chatter and longer insert life thanks to the controlled contact geometry, which improves overall machine utilisation and minimises tool change frequency. Compact dimensions that simplify workplace integration The toolholder’s compact footprint — 125 mm overall length, 20 mm shank width and 25 mm cutting head width — makes it suitable for tight workspaces and multi‑station turrets. Its modest 0.385 kg mass helps keep assembly loads low while ensuring sufficient rigidity for common turning tasks. Because the holder conforms to common ISO sizes, toolroom planning and drawer organisation are simplified, lowering the administrative effort associated with variant tooling. Quick insert compatibility and practical ISO conformity Compatibility with VCMT 1604 inserts means immediate access to a wide range of carbide grades and chipbreakers for different materials and cutting conditions. The ISO identification SVJCL 2020 clarifies the holder’s insert pocket and shank interface, enabling rapid changeover and clear spare‑parts management. For operations that juggle alloys, stainless steels or general engineering steels, the ability to swap grades without modifying the holder supports flexible production planning and faster reaction to material or batch changes. Built for workshop reliability and straightforward maintenance The toolholder’s simple, robust construction reduces the need for frequent maintenance. A clean clamp area and standard fastenings make routine inspection and insert replacement quick and predictable, helping workshops maintain uptime. Alongside the mechanical benefits, the design supports a predictable life cycle — fewer unexpected failures and a dependable baseline for production planning. For precise left‑hand turning with VCMT inserts, choose the Teknik Makina SVJC toolholder — secure supply and expert advice are available from Metav Werkzeuge; contact info@metav-werkzeuge.com or +49 2822 7131930 for tailored recommendations. Technical data Article number: D390TM Manufacturer: Teknik Makina Eclass: 21181004 ISO designation: SVJCL 2020 Facts Overall length: 125 mm Shank width: 20 mm Cutting head width: 25 mm Holder height: 20 mm Cutting height: 33 mm Cutting angle: 93° Weight: 0.385 kg Special features For VCMT 1604 indexable inserts Left‑hand cutting direction SVJC style clamping Bohrstangen designation: K16 FAQ What inserts fit this toolholder? The toolholder accepts VCMT 1604 indexable inserts; the SVJC pocket and the ISO designation SVJCL 2020 ensure standardised fit and secure clamping for those inserts. Is this holder suitable for finishing passes? Yes — the 93° cutting angle and the stable clamping area make the holder suitable for both finishing and light roughing when paired with the appropriate VCMT insert grade. Can the holder be used on small lathes? The compact 125 mm length and 20 mm shank width make the holder compatible with many smaller lathes and turret stations, provided the machine accepts that shank size and left‑hand orientation. Does the product support quick insert changes? The SVJC clamping concept and ISO conformity (SVJCL 2020) allow fast insert changes and straightforward maintenance, reducing downtime during tool changes. What is the intended cutting direction? This holder is configured for left‑hand cutting, optimising chip flow and cutting forces for left‑hand turning operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Klemmhalter 93° SVJCL 2525 M11-IK for VCMT 1103 Wendeplatten Innenkühlung linksschneidend - Teknik Makina
Take advantage of secure clamping, internal coolant and a compact 25 x 25 mm shank to improve machining consistency and tool life. The precise left‑hand orientation and compatibility with VCMT 1103 indexable inserts reduce setup time and rejects; order the holder directly via Metav Werkzeuge or ask our consultants for application advice. Klemmhalter SVJC for VCMT Indexable Inserts – left‑hand toolholder with internal coolant by Teknik Makina The Klemmhalter SVJC for VCMT Indexable Inserts is a left‑hand clamping toolholder designed for coolant‑through turning with VCMT 1103 inserts, offering a compact 25 x 25 mm shank and 150 mm overall length for stable, space‑efficient setups. Secure clamping for VCMT 1103 inserts Internal coolant for improved chip evacuation Compact 25 x 25 mm shank for tight setups Left‑hand orientation with 93° cutting angle Precise clamping that reduces vibration and rejects This toolholder delivers reliable clamping through a proven clamping geometry, compatible with VCMT 1103 indexable inserts. By holding the insert securely and maintaining the correct cutting height (40 mm), the assembly minimises chatter and contributes to repeatable surface finish. The ISO designation SVJCL 2525 indicates a standardised shank interface, so the component integrates easily into existing toolbanks and fixtures. Reduced rework and fewer scrapped parts follow from improved repeatability. Coolant‑through design for longer tool life and cleaner chips The internal coolant feed supports directed lubrication at the cutting edge, which reduces localised heat and improves chip formation. Using coolant‑through tooling often extends insert life and can enable more aggressive cutting parameters without compromising finish. For operations where coolant access is limited, the internal coolant feature helps maintain consistent cooling and evacuation, particularly useful when machining steels and alloys that produce long chips. Space‑saving dimensions with industrial‑grade fastening With a 25 x 25 mm shank and a cutting‑head width of 32 mm within a total length of 150 mm, this holder is designed for compact turret stations and small lathes. The clamping screw specification (M2.5 x 6.5) and the supplied Torx key size T8 ensure reproducible torque application during insert changes, promoting consistent seat pressure and secure fixation. The modest mass (0.63 kg) contributes to reduced inertia on the turret, supporting quicker indexing and steadier cutting behaviour. Practical compatibility and workshop benefits The holder is intended for left‑hand cutting operations and for use with the specified insert shape, meaning setup is straightforward and tooling lists stay concise. The toolholder accepts the boring‑bar designation M11‑IK where a back‑up support or specific adapter is required, easing integration with compatible toolholders. Overall, the component helps rationalise inventory: selecting a standardised ISO toolholder such as this simplifies procurement and lowers the need for bespoke fixturing. Contact Metav Werkzeuge for technical guidance and local stock information on the Teknik Makina SVJCL 2525 clamping holder, and arrange expert advice from our consultants at the Emmerich site. Technical data Article number: AP532TM Manufacturer: Teknik Makina Designation: Klemmhalter SVJC for VCMT Indexable Inserts ISO designation: SVJCL 2525 Data Shank width: 25 mm Shank height: 25 mm Cutting‑head width: 32 mm Overall length: 150 mm Overall height: 25 mm Cutting height: 40 mm Cutting angle: 93° Weight: 0.63 kg Special features Internal coolant Suitable for VCMT 1103 indexable inserts Left‑hand cutting orientation Torx screw M2.5 x 6.5, Torx key T8 Boring‑bar designation M11‑IK FAQ Which inserts fit this holder? The holder is designed for VCMT 1103 indexable inserts; compatibility follows the insert form and seat of the SVJCL 2525 designation. Is there coolant‑through capability? Yes, the toolholder features internal coolant, enabling directed cooling to the cutting edge. What is the cutting direction of the holder? This is a left‑hand toolholder, configured for left‑hand cutting operations. What are the shank dimensions? The shank measures 25 x 25 mm, making it suitable for compact turret stations. Which screw and key are required for clamping? Clamping uses an M2.5 x 6.5 Torx screw and the required Torx key size is T8. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJCR 1212 J11-IK for VCMT 1103 Indexable Inserts Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of secure clamping, internal coolant and precise compatibility with VCMT 1103 inserts to maintain consistent turning results and minimise tool-change downtime; order the SVJCR 1212 tool holder directly via Metav Werkzeuge or ask Metav’s consultants for specific application advice. SVJCR 1212 tool holder (SVJC for VCMT indexable inserts) — internal coolant, right-hand A SVJCR 1212 tool holder designed for secure clamping of VCMT 1103 indexable turning inserts in right-hand turning operations, featuring internal coolant for improved chip control. Right-hand turning holder for VCMT inserts Internal coolant for improved chip evacuation Compact 12 x 12 mm shank and 110 mm length Torx clamping screw M2.5x6.5 with T8 key Precision clamping for consistent turning performance The SVJCR 1212 is built for repeatable, vibration-resistant clamping of VCMT 1103 indexable inserts. Its ISO-style configuration ensures a defined seating plane so that insert positioning is consistent part-to-part; this reduces setup time and contributes to predictable tool life. The combination of a rigid 12 x 12 mm shank and a firm clamping system translates into stable cutting forces, which is particularly important where tolerances are tight and surface finish must be reproducible. Coolant-fed design that stabilises cutting and improves chip flow The integrated internal coolant channel supplies lubricant and coolant directly to the cutting zone, helping to evacuate chips and control temperature at the cutting edge. This effect reduces thermal wear on the insert and can improve surface integrity on the workpiece. For users working at elevated cutting speeds or with difficult-to-machine materials, the coolant-fed holder supports longer insert life and fewer interruptions for manual clearing of swarf, improving overall process efficiency. Compact geometry for tight set-ups and accessible tooling With a 16 mm cutting-head width and an 110 mm overall length, the holder is suitable for confined toolpost layouts while maintaining sufficient reach for common turning tasks. The cutting height of 32 mm and a set 93° cutting angle provide good approach geometry for general turning and profiling operations. The low mass (approx. 0.11 kg) reduces inertial loading on small turrets and helps to keep dynamic deflection low during short overhangs. Rapid insert changes and dependable fixation The clamping mechanism uses a Torx M2.5x6.5 screw and requires a T8 key for straightforward insert replacement and secure fixation. This simple fastening system minimises downtime during service intervals and lowers the risk of incorrect torque compared with non-standard fixings. The holder’s compatibility with the J11-IK style bar and its right-hand orientation make it appropriate for a wide range of turning applications in production environments that demand repeatability and quick maintenance. For secure right-hand turning with internal coolant and proven VCMT compatibility, request technical guidance or place an order through Metav Werkzeuge — Metav’s specialists will advise on integration and delivery from Emmerich. Technical data Article number: AP519TM Manufacturer: Teknik Makina SKU: AP519TM ISO designation: SVJCR 1212 Facts Shank width: 12 mm Shank height: 12 mm Cutting-head width: 16 mm Overall length: 110 mm Cutting height: 32 mm Cutting angle: 93° Weight: 0.11 kg Special features Internal coolant: yes Compatible with: VCMT 1103 indexable inserts Clamping screw: M2,5x6,5 (Torx) Torx key size: T8 Orientation: right-hand Boring bar designation: J11-IK FAQ Which inserts fit this holder? The holder accepts VCMT 1103 indexable turning inserts; the SVJCR 1212 seating and clamp are matched to that insert form for reliable positioning. Does the holder provide coolant to the cutting edge? Yes, the SVJCR 1212 tool holder features internal coolant, delivering fluid to the cutting zone for improved chip control and thermal management. What are the shank dimensions and overall length? The shank measures 12 x 12 mm with an overall length of 110 mm, balancing compactness with adequate reach for typical turning operations. Which fastening parts are required for insert changes? Insert fixation uses a Torx M2.5x6.5 screw; a T8 Torx key is used for tightening and loosening during insert replacement. Is this holder suitable for right-hand turning only? The tooling is specified for right-hand cutting direction and is intended for right-hand turning applications and compatible toolpost arrangements. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJCR 1616 H11 für VCMT 1103 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of precise clamping and proven insert compatibility to keep turning operations consistent and predictable; the combination of a compact 100 mm overall length and firm insert support reduces setup time and tool chatter. Order the SVJC for VCMT Indexable Inserts directly via Metav Werkzeuge or ask our consultants if needed. Klemmhalter — SVJC for VCMT Indexable Inserts (right-hand, SVJCR 1616) by Teknik Makina The SVJC for VCMT Indexable Inserts is a right-hand turning toolholder engineered for secure clamping of VCMT 1103 inserts in general workshop and industrial turning operations. Fits VCMT 1103 indexable inserts Right-hand turning orientation ISO designation SVJCR 1616 Compact 100 mm overall length Consistent clamping for repeatable turning results The SVJC holder is built to deliver stable clamping and repeatable performance in batch production and single-part turning alike. Its geometry secures VCMT-style inserts so that chip formation and surface finish remain predictable; this reduces rework and increases process yield. The SVJCR 1616 designation denotes compatibility with common toolpost layouts and helps ensure correct tool selection during planning. Where operators need predictable tolerances, the holder's design reduces vibration and improves the life of the cutting edge. Compact design that supports efficient workflows A short overall length makes tool changes quicker and reduces overhang on the turret. With an overall length of 100 mm and a focused cutting head width, the toolholder minimises cantilever effects while preserving accessibility to tight features. The H11 shank reference matches common boring bar and toolpost interfaces, enabling straightforward replacement in existing setups. Reduced changeover time and fewer adjustments translate into measurable gains in machine uptime and throughput. Clear compatibility and straightforward set-up Compatibility is simple: the toolholder is intended for VCMT 1103 indexable inserts and provides a cutting height of 25 mm for nominal insert seating. The right-hand orientation and a 93° cutting angle are matched to standard turning tasks where a controlled rake and clearance are required. Clamping is achieved with a mechanical fastener that secures the insert reliably; this arrangement is easy to verify and maintain, so set-up times are predictable and quality controls are simplified. Designed for reliable everyday use in production At just 0.204 kg, the holder offers a balance of rigidity and low mass that helps maintain tool performance without imposing excessive load on mounting hardware. The compact construction supports long-term repeatability and is suitable for workshop environments where tool handling and change frequency are high. Supplied under the Teknik Makina range and available through Metav Werkzeuge, the component benefits from a distribution network that emphasises consistent stock and traceable quality, helping procurement and production teams avoid unexpected supply gaps. For robust right-hand turning with reliable VCMT insert support, contact Metav Werkzeuge in Emmerich for order placement or technical guidance at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: D241TM Manufacturer: Teknik Makina SKU: D241TM ISO designation: SVJCR 1616 Facts Overall length: 100 mm Cutting height: 25 mm Holder height: 16 mm Cutting head width: 20 mm Holder width: 16 mm Weight: 0.204 kg Cutting angle: 93° Special features For inserts: VCMT 1103 Shank designation: H11 Right-hand orientation Indexable insert turning holder FAQ Which inserts are compatible with this toolholder? The SVJC for VCMT Indexable Inserts is specified for VCMT 1103 geometry and secures that type of indexable insert for turning operations. Is the holder right- or left-hand? This toolholder is right-hand oriented; the geometry and cutting angle (93°) are arranged for right-hand turning. What are the key dimensions to check before purchase? Key dimensions include an overall length of 100 mm, a cutting height of 25 mm, holder height 16 mm, and cutting head width 20 mm; weight is 0.204 kg. What is the ISO designation and shank reference? The holder carries the SVJCR 1616 ISO designation and uses the H11 shank reference for mounting compatibility. Can this holder be used in existing toolposts? The holder is designed to fit installations that accept an H11-style shank and SVJCR-style tooling; verify turret or toolpost compatibility with these references before installation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJCR 1616 H11-F-IK for VCMT 1103 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a compact, precision clamping solution that combines stable fastening, internal coolant and a flat design for consistent indexable‑insert turning operations; order this holder via Metav Werkzeuge or contact their specialists for application advice. Klemmhalter SVJCR 1616 — SVJC clamping holder for VCMT indexable inserts with internal coolant, right‑hand The Klemmhalter SVJCR 1616 is a right‑hand, flat clamping holder designed for VCMT 1103 indexable inserts; it provides a compact 16 x 16 mm head and shank with internal coolant routing for improved chip control during turning. Right‑hand clamping holder for VCMT 1103 inserts Internal coolant channel for reliable chip evacuation 16 x 16 mm head and shank, 100 mm overall length Torx M2,5x6,5 clamping screw, T8 key size Consistent clamping and repeatable turning results The flat toolholder is engineered for repeatability and secure insert retention. With a 16 x 16 mm head and shank and ISO designation SVJCR 1616, the holder ensures consistent seating of VCMT 1103 inserts so set‑up deviations are reduced and cycle‑to‑cycle variability is minimised. The positive screw clamping and defined pocket geometry translate directly into predictable cutting behaviour and fewer rejects in production environments that demand tight tolerances. Integrated coolant and secure fastening for longer tool life Built‑in internal coolant supplies the cutting edge directly, helping to control temperatures and evacuate chips from the cutting zone. The clamping mechanism uses a Torx M2,5x6,5 screw with a T8 key size for reliable axial force on the insert. The compact construction — 100 mm overall length and a light weight of 0.19 kg — reduces overhang and vibration, which extends insert life and supports higher metal‑removal rates where process stability is required. Practical compatibility and workshop applications The holder fits standard turning set‑ups where a flat, right‑hand toolholder is required and is intended for use with VCMT indexable inserts in turning tasks. Its bore‑bar designation H11‑F‑IK and the flat head geometry make it suitable for retrofitting into compatible boring bars and toolposts. Installation is straightforward: seat the insert, secure the Torx screw to provide firm clamping and route coolant through the internal channel where machine feeds support through‑tool or directed external supply. The design suits both small jobbing workshops and serial production where compact, precise tooling reduces set‑up time. For dependable turning performance from Teknik Makina, procure the SVJCR 1616 clamping holder through Metav Werkzeuge — contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 for specification support and ordering guidance. Technical data Article number: AP528TM Manufacturer: Teknik Makina Designation ISO: SVJCR 1616 Name: SVJC for VCMT Indexable Inserts Facts Head width: 16 mm Head height: 16 mm Cutting head width: 16 mm Cutting height: 35 mm Overall length: 100 mm Overall height: 16 mm Weight: 0.19 kg Cutting angle: 93° Cutting direction: right Special features Internal coolant: true Compatible insert: VCMT 1103 Clamping screw: M2,5x6,5 (Torx) Torx key size: T8 Boring bar designation: H11-F-IK ISO designation: SVJCR 1616 FAQ What inserts fit this clamping holder? The holder is designed for VCMT 1103 indexable inserts and secures them in the flat pocket according to the ISO pocket form. Is the coolant routed through the holder? Yes, the toolholder features internal coolant routing to deliver fluid towards the insert and aid chip evacuation. What is the ISO designation of the toolholder? The ISO designation is SVJCR 1616, which denotes the flat, right‑hand clamping style and 16 x 16 mm dimensions. Which screw and key are specified for clamping? Clamping is achieved with a Torx M2,5x6,5 screw; the corresponding key size is T8. Can this holder be used in standard boring bars? The holder references boring‑bar type H11‑F‑IK for compatibility; it is intended for fitting into compatible bar systems and toolposts where a flat holder is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJCR 1616 H11-IK For DCMT 11T3 Innenkühlung Linksschneidend - Teknik Makina
The combination of a rigid clamping concept, internal coolant feed and a defining 93° cutting angle ensures steady chip control and longer tool life in left-hand turning operations; order the holder directly via Metav Werkzeuge or request technical advice from the Metav team for fast supply. Klemmhalter SVJC for VCMT Indexable Inserts — left-hand toolholder with internal coolant, Teknik Makina The Klemmhalter SVJC for VCMT Indexable Inserts is a left-hand turning toolholder designed for industrial turning tasks, offering integrated coolant routing and a compact 150 mm form for stable machining with common triangular inserts. Left-hand cutting orientation Suitable for DCMT 11T3 inserts Internal coolant feed integrated Compact overall length 150 mm Solid construction, weight 0.735 kg Consistent clamping for repeatable turning results The holder is built around the SVJCR 1616 ISO design, providing a predictable shank geometry suited to workshop toolposts and turret fixtures. With a defined 93° cutting angle, the geometry supports reliable chip flow and repeatable contact conditions, which directly benefits process stability and surface finish. The precise clamping seat reduces insert movement under load, translating the holder’s mechanical properties into measurable improvements in tool life and component tolerances. Coolant-through design to reduce thermal wear and improve tool life An internal coolant channel is integrated to deliver cutting fluid close to the cutting edge, enhancing heat dissipation and chip evacuation during heavy or interrupted cuts. This targeted cooling lowers thermal loads on the insert, which often extends the effective runtime of carbide grades and supports consistent dimensional accuracy across longer batches. For shops prioritising cycle-time and tool cost per part, the coolant feed is a tangible advantage for productivity and process reliability. Industrial-grade fastening and maintenance features The toolholder’s maintenance concept focuses on quick, secure insert changes and uncomplicated upkeep: clamping is effected using a Torx screw (size M2.5x6.5) that requires a T8 key for tightening. The accessible fastening geometry shortens service times and reduces downtime during insert indexation. With a measured mass of 0.735 kg and an overall length of 150 mm, the component balances rigidity and manageable handling, making it suitable for medium-duty turning centres and lathe toolposts where dependable clamping stiffness is required. Designed for common triangular turning inserts and practical workshop use Compatibility with triangular inserts is signalled by the designation and the specified insert sizing; the holder is provided for DCMT 11T3 style inserts and follows established clamping standards, supporting straightforward integration into existing tooling setups. The left-hand orientation and compact head width (32 mm) make the holder a pragmatic choice for external turning and profiling where approach direction and tool clearance are decisive. The documented shank reference H11-IK supports consistent seating and interchangeability in standard toolholding systems. For technical purchase advice on the Teknik Makina SVJC holder or to arrange prompt delivery from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for detailed assistance and stock information Technical Data Article number: AP520TM Manufacturer: Teknik Makina ISO designation: SVJCR 1616 Intended insert: DCMT 11T3 Shank designation: H11-IK Facts Cutting direction: left Cutting angle: 93° Overall length: 150 mm Head width: 32 mm Holder height: 25 mm Cutting height: 35 mm Weight: 0.735 kg Special features Internal coolant feed: yes Torx screw: M2.5x6.5 Torx key size: T8 Compact design for confined setups Robust construction for industrial use FAQ Which inserts fit the holder? The holder is specified for DCMT 11T3 triangular inserts; the SVJC designation indicates a clamping geometry compatible with these common insert types. Is coolant-through capability available? Yes — the toolholder includes an internal coolant feed to deliver fluid close to the cutting edge for improved heat control and chip evacuation. What is the cutting direction of the toolholder? The toolholder is configured for left-hand cutting operations, suitable for turning tasks that require a left-hand approach. What fastening hardware is required for insert changes? Insert clamping uses a Torx screw (M2.5x6.5) and a T8 Torx key for secure and fast insert replacement. What are the key dimensions to check for machine compatibility? Important dimensions: overall length 150 mm, head width 32 mm, holder height 25 mm, cutting height 35 mm; the ISO designation SVJCR 1616 indicates the shank form. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJCR 1616 H16 For VCMT 1604 Indexable Inserts Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of secure clamping, compatibility with VCMT 1604 indexable inserts and a compact 100 mm overall length to improve turning efficiency; the result is stable cutting, reduced setup time and reliable repeatability. Order the clamping holder SVJC for VCMT indexable inserts directly via Metav Werkzeuge or ask our consultants if needed. Clamping holder SVJC for VCMT Indexable Inserts — right-hand turning toolholder by Teknik Makina Clamping holder SVJC for VCMT Indexable Inserts provides a compact, rigid solution for right-hand turning with VCMT-family inserts, optimised for precision shop and industrial lathe applications Right-hand turning holder for VCMT inserts Compatible with VCMT 1604 indexable inserts Sturdy 16 mm shank height for secure clamping 100 mm overall length for versatile tooling Consistent clamping for repeatable turning results The SVJC-style holder is engineered to deliver stable tool clamping under cutting loads, which reduces vibration and improves surface finish. The combination of a 16 mm shank height and a precisely dimensioned clamping head ensures that the insert pocket maintains rigidity during interrupted or heavy cuts. This mechanical stability translates into predictable chip formation and fewer rejects in production, supporting efficiency targets in batch and single-part manufacturing. Designed for quick compatibility with standard VCMT inserts Designed specifically for VCMT 1604 indexable inserts and carrying the SVJCR 1616 ISO designation, the holder simplifies insert changes and tool inventory management. The right-hand orientation and standardised pocket geometry allow the use of widely available indexable inserts, reducing procurement complexity. The toolholder’s compatibility accelerates setup and minimises downtime when swapping inserts or geometries, directly supporting process throughput and cost-efficiency. Compact dimensions that expand workshop flexibility With a 100 mm overall length and a 20 mm cutting-head width, the holder fits tighter toolpost arrangements while preserving effective cutting clearance. The relatively low mass (0.195 kg) reduces dynamic overhang and assists balance on the toolpost, which is advantageous for fine turning and finishing passes. These compact dimensions make the holder suitable for confined work envelopes and help to shorten tool-change cycles, increasing usable machine hours. Practical engineering for integration and dependable service life A nominal cutting angle of 93° and a 33 mm cutting height are deliberate design choices that support common turning geometries and predictable tool engagement. The robust clamping mechanism and standardised H16 attachment reference simplify integration into existing tool chains. Sourcing through Metav brings further assurance: a quality-filtered European supply chain and access to technical advice streamline procurement and fleet standardisation for trade and industry customers. Contact Metav Werkzeuge for a fitment check and further technical details on the Teknik Makina clamping holder SVJC (SKU D244TM); their Emmerich-based consultants can confirm suitability for specific lathes and insert grades Technical data Article number: D244TM Manufacturer: Teknik Makina Designation: SVJC for VCMT Indexable Inserts ISO designation: SVJCR 1616 Core data Overall length: 100 mm Shank height: 16 mm Cutting head width: 20 mm Tool width: 16 mm Cutting height: 33 mm Cutting angle: 93° Weight: 0.195 kg Cut direction: right-hand Compatibility & features For VCMT 1604 indexable inserts Right-hand turning holder H16 boring bar designation SKU: D244TM FAQ Which insert types fit this holder? The holder is designed for VCMT 1604 indexable inserts; the pocket accepts standard VCMT geometries for secure seating. Is the holder suitable for right-hand or left-hand turning? This toolholder is configured for right-hand turning operations. What is the ISO designation and how does that help with selection? The ISO designation SVJCR 1616 identifies the mounting and pocket geometry, helping to match the holder with compatible toolposts and insert types. Are the dimensions suitable for tight toolpost arrangements? Yes; the 100 mm overall length and 20 mm head width make the holder well suited to confined setups and multi-tool turrets. What are the shank height and weight specifications? Shank height is 16 mm and the nominal weight is 0.195 kg, offering a balance of rigidity and low mass for stable turning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJCR 2020 K11-IK for DCMT 11T3 Wendeplatten Innenkühlung Rechtsschneidend - Teknik Makina
Combine robust clamping with through‑coolant efficiency and compact dimensions to secure repeatable turning results; the right‑hand SVJCR 2020 holder accepts standard indexable inserts and offers a 150 mm overall length with a 93° cut angle. Order the holder directly via Metav Werkzeuge or consult their technical advisors for application matching. Klemmhalter SVJCR 2020 — Right‑hand clamping holder with internal coolant, Teknik Makina The Klemmhalter SVJCR 2020 is a right‑hand clamping holder intended for turning operations, featuring internal coolant and designed to work with common DCMT 11T3 indexable inserts. Internal coolant channel for efficient chip evacuation Right‑hand orientation for standard turning operations Compatible with DCMT 11T3 indexable inserts Robust SVJCR 2020 clamping system, 150 mm overall length Repeatable clamping for reliable part quality The SVJCR 2020 designation identifies a precision clamping system that secures indexable inserts with consistent seating and repeatability. The SVJCR 2020 clamp geometry reduces insert movement under load, which translates into stable cutting conditions and more predictable tool life. The 93° approach angle ensures favourable cutting forces for many external turning applications, while the moderate mass (approximately 0.735 kg) keeps tool overhang manageable. These attributes together reduce scrap rates and support steady cycle times on serial production runs. Internal coolant to keep cycles productive An integrated internal coolant channel directs cutting fluid close to the cutting edge, improving chip control and cooling the insert‑seat interface. This targeted supply reduces heat build‑up, which often extends insert life and helps maintain surface finish quality over longer cuts. In practice, coolant‑through holders lower the need for secondary interventions to clear chips and can enable slightly higher cutting parameters where the machine and insert grades permit, improving overall machining throughput without sacrificing consistency. Workshop‑friendly dimensions and serviceability Compact dimensions have been chosen to balance rigidity and accessibility: overall length 150 mm, head width 32 mm, holder width/height 25 mm and a cutting height of 35 mm. These measures make the toolholder suitable for typical lathe toolposts while keeping every dimension within common fixture envelopes. Maintenance uses standard hardware (Torx key T8, screw M2.5x6.5), simplifying routine insert changes and clamp checks. The relatively low weight supports safer handling at the bench and reduces inertia during rapid tool changes. Designed for integration and dependable operation As a right‑hand turning holder, the component integrates into production settings where predictable orientation is required. The SVJCR 2020 clamping form and the compatibility with standard DCMT 11T3 inserts enable quick requalification when replacing worn cutters, which shortens downtime. Robust construction and a focus on practical features support a dependable supply chain relationship: tools delivered from an established partner help to keep machines cutting with minimal administrative overhead. Contact Metav Werkzeuge for application advice on the Teknik Makina SVJCR 2020 holder and to confirm compatibility with specific insert grades and machine setups Technical data SKU: AP521TM Designation: Klemmhalter (SVJCR 2020) Manufacturer: Teknik Makina Overall length: 150 mm Weight: 0.735 kg Cutting direction: right Internal cooling: yes Facts Head width: 32 mm Holder width: 25 mm Holder height: 25 mm Cutting height: 35 mm Cutting angle: 93° Torx key size: T8 Torx screw: M2.5x6.5 Special features ISO designation SVJCR 2020 Compatible inserts: DCMT 11T3 Right‑hand turning holder Through‑coolant provision for improved chip control FAQ Which indexable inserts fit this holder? The holder is designed for compatibility with DCMT 11T3 indexable inserts; confirm the chosen insert grade and geometry for intended materials before production. Is cooling delivered through the holder? Yes, the SVJCR 2020 toolholder features internal coolant to deliver fluid near the cutting edge and assist chip evacuation. What is the overall length and weight of the toolholder? The overall length is 150 mm and the weight is approximately 0.735 kg, making it suitable for standard lathe toolposts. What fastening hardware is required for maintenance? Maintenance and insert changes use a T8 Torx key and the clamp screw spec is M2.5x6.5, which are common workshop standards. Which cutting direction is this holder designed for? The product is configured for right‑hand turning operations and is intended for external turning applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJCR 2020 K16-IK For DCMT 11T3 Innenkühlung Rechtsschneidend - Teknik Makina
Reliable turning performance is achieved through precise clamping, internal coolant and a defined 93° cutting angle, delivering stable chip control and repeatable surface quality; compact dimensions (150 mm length, 35 mm cutting height) support secure setups. Order the SVJC for VCMT indexable inserts directly via Metav Werkzeuge or ask our consultants if needed. SVJC for VCMT Indexable Inserts – SVJCR 2020 turning holder with internal coolant (Teknik Makina) The SVJC for VCMT Indexable Inserts is a right‑hand turning holder engineered for secure clamping of DCMT/VCMT‑style indexable inserts in general turning operations. Right‑hand turning holder with internal coolant Compatible with DCMT/VCMT 11T3 inserts ISO designation SVJCR 2020 for reliable fit Compact 150 mm length, 35 mm cutting height Consistent clamping for repeatable results A robust clamping design provides secure clamping of indexable plates, reducing vibration at the cutting edge and improving surface finish. The holder’s geometry with a 93° cutting angle ensures predictable chip flow and stable cutting forces, which is particularly beneficial in finishing passes and serial production. The ISO designation SVJCR 2020 guarantees compatibility with standard tool posts and quick replacement cycles, supporting consistent set‑ups and reduced machine downtime. Controlled coolant flow to extend tool life The integrated internal coolant channel directs lubricant precisely to the cutting zone, aiding in chip control and thermal management. This reduces flank wear and helps maintain edge integrity for longer, improving overall tool life. For right‑hand turning operations the holder’s coolant routing supports uninterrupted machining at higher speeds while maintaining reliable chip evacuation, which contributes to fewer interruptions and higher process stability. Designed for quick assembly and secure fastening Assembly and insert changes are straightforward thanks to the defined clamping parts and fasteners: the clamping plate TA034, Torx drive T15 and screw M3.5x11 ensure repeatable torque and secure seating. With an overall length of 150 mm, a cutting height of 35 mm and a head width of 32 mm, the holder offers a compact footprint that is easy to position in tight toolrooms. The mass of 0.735 kg provides a good balance between rigidity and dynamic response for most medium‑duty turning tasks. Practical supply and reliability for workshop routines Compatibility with common indexable plates such as DCMT 11T3 reduces the need for special tooling inventories and speeds up changeovers. The combination of standardised interface and practical dimensions supports efficient inventory management and flexible machine assignment. Backed by an established distributor and a broad product range, workshops benefit from a dependable supply chain and sensible logistics directly from the European distribution centre. Contact Metav Werkzeuge for a tailored quote on the SVJCR 2020 clamping holder AP525TM and fast delivery from Emmerich Technical Data SKU: AP525TM Item: SVJC for VCMT Indexable Inserts Manufacturer: Teknik Makina ISO designation: SVJCR 2020 eClass: 21181004 Facts Overall length: 150 mm Cutting height: 35 mm Holder height: 25 mm Cutting head width: 32 mm Weight: 0.735 kg Cutting angle: 93° Special features Right‑hand cutting direction Internal coolant Compatible with DCMT 11T3 inserts Clamping plate: TA034 Torx key: T15 Torque screw: M3.5x11 Boring bar designation: K16-IK FAQ Which insert types fit this holder? The SVJC for VCMT indexable inserts (SVJCR 2020, AP525TM) is compatible with DCMT 11T3‑style plates and VCMT variants that match the same pocket geometry. Is the coolant internal or external? Internal coolant is provided via a dedicated channel, enabling targeted lubrication at the cutting edge to improve chip evacuation and reduce wear. Can the holder be used for finishing operations? Yes; the combination of a 93° cutting angle and secure clamping makes the holder suitable for finishing passes where surface quality and dimensional repeatability are required. What fastening hardware is required for assembly? Assembly uses the clamping plate TA034 with a Torx T15 drive and a M3.5x11 screw to ensure consistent clamping force and repeatable replacement. Is this a left‑hand or right‑hand holder? This toolholder is designed for right‑hand cutting direction and is specified accordingly in the product data. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 93° SVJCR 2525 M11-IK for VCMT 1103 Indexable Inserts Innenkühlung Rechtsschneidend - Teknik Makina
Take advantage of a robust combination of precise fit, internal coolant and compatibility with VCMT 1103 indexable inserts to improve cycle stability and reduce rework. The holder’s 25 x 25 mm shank and 93° cutting angle provide consistent chip control and repeatable seating. Order the SVJCR 2525 clamping holder directly via Metav Werkzeuge or ask our consultants if needed. SVJCR 2525 clamping holder — right‑hand toolholder with internal coolant by Teknik Makina The SVJCR 2525 clamping holder is a right‑hand turning toolholder designed for VCMT indexable inserts, featuring internal coolant delivery and a sturdy 25 x 25 mm shank suitable for production turning operations Internal coolant delivery Compatible with VCMT 1103 inserts 25 x 25 mm robust shank Right‑hand, 93° cutting angle Improved coolant flow for stable cutting performance The integrated internal coolant channel directs cutting fluid precisely to the cutting edge, reducing heat at the tool–workpiece interface and promoting longer tool life. For shops that run continuous turning cycles, targeted coolant reduces thermal deformation and lowers the risk of built‑up edge. The design is particularly effective when paired with VCMT 1103 inserts, where coolant access directly behind the insert improves chip evacuation and flank wear behaviour. This technical arrangement results in fewer interruptions for regrinding or insert changes and helps maintain consistent surface finish in serial production. Secure clamping and precise seating for repeatable results A well engineered clamping seat and Torx M2.5×6.5 fastening ensure reliable insert retention under interrupted cuts. The SVJCR 2525 holder’s 25 x 25 mm shank and 32 mm cutting‑head width provide a rigid interface with modest overhang, reducing vibration and improving dimensional stability. The assembly, tightened with a T8 key, is designed so that the insert is held with repeatable orientation; this means setup time is minimised and component tolerances are easier to hold across batches. For operators new to indexable tooling, the concept is simple: a precise seat plus secure clamp equals consistent cut geometry. Application focus: right‑hand turning with predictable chip control Engineered for right‑hand turning, the holder features a 93° approach angle that balances radial and axial forces for a controlled cut. The 40 mm cutting height and overall length of 150 mm are optimised for general turning tasks where rigidity and accessibility are required. At a weight of 0.63 kg, the toolholder is robust yet manageable for rapid tool changes. When machining a range of ferrous and non‑ferrous materials, the combination of geometry and internal coolant supports predictable chip form and reduces cycle variability, which is a rational way to lower scrap rates and increase throughput. Contact Metav Werkzeuge to confirm compatibility with existing toolposts and to arrange delivery of the Teknik Makina SVJCR 2525 clamping holder from Emmerich Technical data Article number: AP522TM Manufacturer: Teknik Makina ISO designation: SVJCR 2525 For inserts: VCMT 1103 Facts Shank width: 25 mm Shank height: 25 mm Cutting‑head width: 32 mm Cutting height: 40 mm Overall length: 150 mm Overall height: 25 mm Cutting angle: 93° Weight: 0.63 kg ECLASS: 21181004 Cutting direction: right Special features Internal coolant delivery Torx screw: M2.5x6.5 Torx key size: T8 Compatible with VCMT indexable inserts Holder shank designation: M11‑IK FAQ What inserts are compatible with this clamping holder? The holder is designed for VCMT 1103 indexable inserts and provides the correct seating and clamping geometry for reliable performance with those grades. Is coolant delivered through the holder? Yes — the toolholder features internal coolant delivery to the insert area for improved thermal control and chip evacuation. Which cutting direction is this toolholder made for? This is a right‑hand turning holder with a 93° approach angle, intended for standard right‑hand turning applications. What is the ISO designation and weight of the toolholder? The ISO designation is SVJCR 2525 and the toolholder weighs 0.63 kg (SKU AP522TM by Teknik Makina). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Klemmhalter 95° DCLNL 2525 M12 For CN-- 1204 Wendeplatten Innenkühlung Linksschneidend - Teknik Makina
Stable clamping and ISO compatibility combine to deliver consistent left‑hand turning performance with secure chip control; benefit from a compact 150 mm overall length and the 95° cutting angle for reliable finishing. Order directly via Metav Werkzeuge or consult the Metav technical advisors for application-specific guidance. Clamping holder DCLN for CN-- indexable inserts — left‑hand turning toolholder by Teknik Makina The Clamping holder DCLN for CN-- Indexable Inserts is a left‑hand ISO toolholder designed for secure clamping of CN-- 1204 inserts in turning applications where stability and repeatable geometry matter. Left‑hand tool holder for turning operations Accepts CN-- 1204 indexable inserts 95° cutting angle for reliable chip control ISO DCLNL 2525 designation, 150 mm overall length Precision and stability for left‑hand turning The DCLN clamping solution is engineered to deliver consistent cutting geometry in left‑hand turning operations. With a 95° cutting angle, the toolholder promotes controlled chip flow and reduces radial loading on the insert, which helps to maintain surface finish and tool life. The internal clamping geometry and attention to mounting tolerances minimise micro‑movement at the cutting edge, so operators and process engineers can expect predictable turning results and repeatable part quality across batch runs. Compatibility and practical clamping features Built to the ISO DCLNL 2525 specification, the clamping holder accepts CN-- 1204 indexable inserts and is secured with an M12 clamping screw interface. This standardised connection simplifies toolset logistics and ensures interchangeability with established insert ranges. The 30 mm cutting height aligns cutting edge position with common toolpost setups, reducing setup time and enabling straightforward tool changeover in mixed‑production environments. Compact dimensions that aid machine clearance and rigidity A 150 mm overall length balances reach and rigidity, while the 32 mm cutting‑head width and 25 mm holder height/width provide a low‑profile assembly that fits many lathe toolposts without excessive overhang. At 0.785 kg, the component is light enough for efficient handling yet substantial enough to contribute to damping of chatter in routine turning operations. These dimensional choices were made to support stable machining in close‑quarter tool setups where machine‑tool interaction is critical. Practical fit for workshop and production use Supplied under the Teknik Makina designation and offered through Metav’s distribution, the holder is suitable for small series production as well as workshop repairs where standardised insert formats are preferred. The combination of ISO conformity, a robust clamping thread and proven insert compatibility reduces inventory complexity and supports faster tool changes on the shop floor. If application constraints are unusual, Metav’s advisors can assist in selecting the correct variant or complementary tooling. For tailored technical advice and to specify the correct DCLN clamping configuration for specific turning tasks, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: D302TM Manufacturer: Teknik Makina Product type: Clamping holder (DCLN for CN-- indexable inserts) SKU: D302TM Facts Overall length: 150 mm Weight: 0.785 kg Cutting head width: 32 mm Holder height: 25 mm Holder width: 25 mm Cutting height: 30 mm Cutting angle: 95° Special features ISO designation: DCLNL 2525 Compatible inserts: CN-- 1204 Clamping thread/interface: M12 Cutting direction: left‑hand FAQ Which inserts fit this holder? The holder accepts CN-- 1204 indexable inserts as specified; this compatibility is indicated in the product details for the DCLN clamping holder (SKU D302TM). Is the clamping direction left‑hand or right‑hand? This toolholder is manufactured for left‑hand cutting direction and is intended for corresponding lathe setups. What is the overall length and why does it matter? Overall length is 150 mm; a balanced length reduces overhang, improving rigidity and surface finish in turning operations. Which clamping screw or interface is required? The holder uses an M12 clamping interface for the insert clamp, matching common clamping hardware and simplifying replacement. What cutting angle does the holder provide and what is the benefit? The 95° cutting angle supports controlled chip flow and stable cutting forces, which helps to enhance surface quality and tool life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Precision coolant delivery for demanding turning operations
Tool holders with internal coolant are precision components used in machining, particularly turning, to hold indexable inserts securely and feed them to the workpiece. Also referred to as through-coolant tool holders or internal coolant toolholders, these systems channel coolant directly to the cutting edge to reduce thermal load and improve chip control in heavy or high-speed machining.
How they work and where they help most
Standard holders without internal coolant rely on external nozzles, which can be blocked by chips and fail to reach the insert tip reliably. In contrast, holders with internal coolant contain integrated coolant channels and boreholes in the tool shank that guide the coolant under pressure straight to the insert. This targeted supply is particularly valuable for difficult-to-machine materials, high cutting speeds, deep cuts and internal turning where conventional coolant delivery struggles.
Key facts
| characteristic | detail |
|---|---|
| category | tool holders with internal coolant |
| common synonyms | internal coolant toolholders; coolant-through tool holders |
| typical application | turning, heavy machining, internal bore finishing |
| coolant routing | internal channels and boreholes delivering coolant to the insert seat |
| key technical effect | direct cooling at the cutting edge, improved chip evacuation, reduced thermal load |
| comparison | standard holders use external nozzles; internal coolant holders route coolant through the shank |
Measurable benefits for production
- Direct coolant feed reduces the thermal stress on the insert, extending tool life.
- Improved pressure at the cutting zone enhances chip evacuation, reducing recutting and tool damage.
- More consistent cooling helps achieve better surface finish and dimensional stability.
- Reliable coolant delivery under challenging chip conditions supports higher cutting speeds and heavier cuts.
Metav: precision supply and industrial competence
Metav positions itself as the practical partner for workshops and production: a European quality filter based in Emmerich that combines broad product availability with technical expertise. With over 48,000 customers and more than 250,000 products, Metav supplies through-coolant tool holders and related accessories with dependable logistics and application guidance, making sophisticated cooling solutions accessible for every workshop.
In short
Tool holders with internal coolant deliver targeted, high-efficiency coolant to the insert tip, improving chip control, tool life and surface quality in demanding turning tasks.
FAQ
When should I choose tool holders with internal coolant over standard holders?
Choose tool holders with internal coolant when external coolant nozzles cannot reliably reach the cutting edge, for deep cuts, internal turning, heavy machining or when machining difficult materials at high speeds. The internal coolant toolholders ensure direct cooling and better chip evacuation in these scenarios.
Can internal coolant toolholders be used with all insert types?
Internal coolant toolholders are compatible with most indexable inserts provided the holder and insert interface are specified for coolant-through operation. Verify seat type and manufacturer recommendations for coolant-through compatibility.
What performance improvements can I expect from coolant-through tool holders?
Typical improvements include longer tool life, fewer interruptions from clogged external nozzles, improved chip control and a more consistent surface finish due to reduced thermal distortion at the cutting edge.
How is coolant delivered inside an internal coolant toolholder?
Coolant is channelled through boreholes and internal passages in the tool shank directly to the insert pocket; this focused path creates sufficient pressure at the cutting edge to flush chips away and cool the insert effectively.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com