Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
80mm Corner Turning Head for WNGX 0806 Indexable Inserts, 90° Cutting Angle, M5x12 Torx - Teknik Makina
Take advantage of a precise 90° cutting geometry combined with a 27 mm shank for secure mounting and repeatable corner turning; the design ensures efficient indexable insert use and reduced setup times. Order directly via Metav Werkzeuge or contact our consultants for tailored application advice. Eckmesserkopf T777TM – 90° corner turning head with 27 mm shank for WNGX 0806 inserts by Teknik Cutting Tools The Eckmesserkopf T777TM is a compact 90° corner turning head designed for CNC turning operations using WNGX 0806 indexable inserts; ideal where accurate corner profiles and quick insert changes are required 90° cutting angle for precise corner turning 27 mm shank for stable toolholder fit Compatible with WNGX 0806 indexable inserts Torx M5x12 clamping screw, T20 drive Accurate corner geometry that boosts process reliability The corner turning head delivers a clear machining advantage thanks to its 90° cutting angle, which is engineered to produce consistent shoulder and profile geometry on workpieces. By accepting WNGX 0806 indexable inserts, the holder enables rapid insert indexing and replacement, reducing spindle downtime and improving cycle-to-cycle repeatability. The toolholder’s geometry supports stable cutting conditions, which in turn helps to maintain surface finish and dimensional accuracy in repetitive production runs. Secure mounting and straightforward insert clamping for faster setups With a 27 mm shank diameter and a compact overall length of 50 mm, the unit fits common tool posts while minimising overhang to reduce vibration. Clamping is achieved via an M5x12 Torx screw (T20 drive), providing robust insert retention with a simple tightening routine. The holder’s compatibility with Korloy-approved inserts assures correct seating and clamping, enabling quick tool changes and consistent seating pressure across indexings—key factors for predictable machining performance. Designed for productive workshops and adaptable machining tasks The turning head combines a practical diameter of 80 mm and a measured mass of 1.105 kg to balance rigidity and handling convenience. The configuration supports multiple cutting edges—specified as 7—to extend useful tool life through systematic indexing. As a purpose-built toolholder, it reduces setup complexity and contributes to smoother production flows, making it suitable for batch production and serial manufacturing where process stability and minimal intervention are priorities. For application guidance or to procure the T777TM corner turning head from Teknik Cutting Tools, contact Metav Werkzeuge for expert advice and supply from Emmerich Technical Data Article number: T777TM Name: Eckmesserkopf Type / Use: Corner turning head for indexable inserts Compatible inserts: WNGX 0806 Indexable Inserts Manufacturer brand: Teknik Cutting Tools Facts Shank diameter: 27 mm Weight: 1.105 kg Diameter: 80 mm Overall length: 50 mm Cutting angle: 90° Number of cutting edges: 7 SKU: T777TM ECLASS: 21180902 Special features Clamping screw: M5x12 Torx Drive key: T20 Insert manufacturer compatibility: Korloy Designed for quick insert changes and stable mounting FAQ What inserts fit this turning head? The Eckmesserkopf T777TM accepts WNGX 0806 indexable inserts and is specified to be compatible with Korloy insert types. How is the insert secured in the holder? Insertion is secured by an M5x12 Torx clamping screw tightened with a T20 key, ensuring reliable retention during machining. What shank size is required for mounting? The tool requires a 27 mm shank seat for correct mounting in the toolpost or holder. Is this head suitable for high-precision production runs? Yes; the 90° cutting geometry, firm clamping mechanism and reduced overhang support repeatable profiles and consistent surface quality in serial machining. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Corner Turning Head for WNMU 0705 Indexable Inserts, 90° Cutting Angle, M4x10 Fixing - Teknik Makina
Take advantage of a compact, robust toolholder that combines precise positioning with fast set-up: the holder accepts WNMU 0705 indexable inserts, features a 90° cutting angle and a secure Torx clamping system for consistent turning results. Order the corner turning head directly via Metav Werkzeuge or consult our specialists for application guidance. Corner turning head T394TM — indexable insert holder with 90° cutting angle The Corner turning head T394TM is a compact toolholder designed for shoulder and profiling operations using WNMU 0705 indexable inserts, offering stable support and precise indexing for medium- to heavy-duty turning tasks Compact toolholder for WNMU 0705 inserts 90° cutting angle for accurate shoulder turning Ø80 mm head diameter, robust construction Shank Ø27 mm with M4x10 Torx clamping Increased process reliability through rigid design and clear geometry The holder delivers improved machining stability thanks to a defined 90° cutting angle and a large Ø80 mm head diameter, which together reduce vibration and deflection during shoulder turning. The robust shank with an Ø27 mm mounting interface ensures repeatable seating in toolposts or turret bores. This mechanical rigidity translates into steadier surface finishes and extended insert life, making the solution suitable where dimensional consistency is required. Faster set-up and secure clamping for predictable cycle times A straightforward clamping arrangement with an M4x10 Torx screw and a T15 key allows rapid insert change and reliable retention under cutting forces. The holder accommodates WNMU 0705 inserts and is ISCAR-compatible, enabling easy integration into existing tooling systems. The practical geometry reduces downtime spent on adjustments, thereby supporting higher machine uptime and predictable cycle times in batch and single-part production. Practical workshop compatibility and durable build for everyday use Engineered for common turning operations, the head offers a compact overall length of 50 mm and a mass of approximately 1.012 kg, providing a balanced combination of mass and manoeuvrability. With seven cutting edges listed for the design, indexation frequency can be optimised to match production demands. The holder’s specification supports a wide range of shoulder and profiling tasks while remaining simple to mount and maintain in industrial environments. Contact Metav Werkzeuge today for precise application advice or to request the Teknik Makina corner turning head T394TM through Metav Werkzeuge; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T394TM Manufacturer: Teknik Makina Facts Shank diameter: 27 mm Head diameter: 80 mm Overall length: 50 mm Weight: 1.012 kg Cutting angle: 90° Number of cutting edges: 7 Special features For WNMU 0705 indexable inserts ISCAR-compatible insert geometry Torx screw M4x10 Torx key size T15 FAQ Which insert type fits this holder? The holder accepts WNMU 0705 indexable inserts and is specified as compatible with ISCAR-style inserts for that format. What is the required shank diameter for mounting? Mounting is specified for a shank with an Ø27 mm interface; this value should match the toolpost or turret bore diameter. Which screw and key are used for clamping the insert? Clamping is achieved with an M4x10 Torx screw and requires a T15 Torx key for secure tightening. Is the cutting angle suitable for shoulder turning? Yes, the defined 90° cutting angle is intended for accurate shoulder and face-turning applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Turning Head for WNMU 0806 Indexable Inserts L50mm Internal Coolant - Teknik Makina
Take advantage of the combination of internal coolant, an 80 mm diameter and a compact overall length for stable, repeatable edge machining; order the tool directly via Metav Werkzeuge or consult our specialists for technical alignment. Corner tool head T545-1TM — 80 mm diameter with internal coolant, for WNMU 0806 indexable inserts (Teknik Makina) Corner tool head T545-1TM for short-reach external turning and profile work using WNMU 0806 indexable inserts 80 mm tool head diameter Internal coolant for chip evacuation Compatible with WNMU 0806 indexable inserts 90° cutting angle for edge machining Torx T20 interface, M5x12 fastening screw Enhanced process stability through robust geometry The compact corner tool head combines a solid mass and finished clamping interface to deliver consistent tool behaviour during interrupted cuts. The 80 mm diameter and a well-balanced body reduce vibration, which results in improved surface finish and longer insert life. For production runs where repeatability is essential, the head's geometry supports reliable cutting conditions and predictable tool wear, enabling process planners to calculate cycle times with greater confidence. Precise compatibility that simplifies tooling choices Designed specifically for WNMU 0806 indexable inserts, this turning head removes ambiguity in insert selection and reduces setup iterations. The defined 90° cutting angle supports crisp shoulder and parting operations while the specified Torx T20 interface and M5x12 screw standardise fastening across compatible toolholders. As a result, toolroom preparation is faster and tool changeovers are more straightforward, lowering downtime between batches. Optimised internal cooling for consistent cutting performance Internal coolant routing is integrated to deliver coolant directly to the cutting zone, improving chip control and heat dissipation. This configuration helps protect both the insert and the workpiece from thermal damage and supports higher metal removal rates where coolant-fed operations are permitted. The presence of internal coolant is a decisive advantage when machining materials that benefit from localised cooling and controlled chip evacuation. Compact overall length with service-friendly fastening With an overall length of 50 mm and a net weight of 1.016 kg, the head is suited to constrained setups and short overhang applications. The compact dimensions contribute to increased rigidity at the cutting point, while the standardised Torx fixation allows straightforward maintenance using common workshop tools. Where accessibility is limited, the combination of compact size and standard fasteners speeds up routine checks and insert replacements. Speak with Metav Werkzeuge in Emmerich to confirm suitability for specific materials or to arrange procurement of the Teknik Cutting Tools corner tool head T545-1TM through Metav Werkzeuge, ensuring prompt and reliable delivery Technical data Article number: T545-1TM SKU: T545-1TM ECLASS: 21181015 Core data Diameter: 80 mm Overall length: 50 mm Weight: 1.016 kg Cutting angle: 90° Number of cutting edges: 5 Special features Internal coolant: yes Compatible inserts: WNMU 0806 Compatible insert maker: Kyocera Torx key: T20 Torx screw: M5x12 Product type: Corner tool head FAQ What inserts fit the corner tool head T545-1TM? The corner tool head is configured for WNMU 0806 indexable inserts and is compatible with inserts from Kyocera as specified for the T545-1TM. Is the head suitable for interrupted cuts and shoulder turning? Yes. The 90° cutting angle and the head’s mass distribution make the T545-1TM well suited to interrupted cuts and precise shoulder work. How is coolant delivered to the cutting zone? Internal coolant is routed through the tool body on the T545-1TM, supplying coolant directly to the insert for improved chip control and thermal management. Which fasteners and tools are required for insert clamping? The head uses an M5x12 fastening screw with a Torx T20 interface, allowing maintenance with common Torx T20 tools. Can the corner tool head be used in compact setups? Yes. The T545-1TM’s overall length of 50 mm and weight of 1.016 kg make it appropriate for short overhang applications where rigidity is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Turning Head for WNMU 0807 Indexable Inserts L50mm With Internal Coolant - Teknik Makina
Take advantage of the robust combination of an 80 mm tool body, internal coolant, and standard WNMU 0807 compatibility to secure stable shoulder turning and reduced cycle times; order directly via Metav Werkzeuge or consult our specialists for process matching. Corner tool head for WNMU 0807 Indexable Inserts — 80 mm, internal coolant (Teknik Makina) The Corner tool head is an indexable insert holder designed for 90° shoulder turning and external profiling with WNMU 0807 inserts, offering compact rigidity for precision turning on CNC lathes. 80 mm diameter tool head Internal coolant channel Compatible with WNMU 0807 inserts Consistent rigidity for precise shoulder turning The compact 80 mm body and 50 mm overall length provide a rigid mounting platform that reduces deflection when machining square shoulders and faces. With a true 90° cutting angle, the tool holder supports clean shoulder formation and consistent part geometry, which lowers rework and inspection demands. This structural stability translates into predictable cycle times and repeatable surface finish without constant process adjustments. Improved cooling and chip control for longer runtimes Integrated internal coolant directs cutting fluid towards the cutting zone, reducing temperatures at the insert edge and improving chip control during interrupted cuts. The targeted coolant flow helps maintain cutting-edge integrity and extends insert life, particularly under elevated cutting speeds or when machining abrasive alloys. By managing heat and evacuation of chips more effectively, the tool head supports higher metal removal rates while protecting adjacent machine components from thermal stress. Standardised compatibility for fast servicing Designed for WNMU 0807 indexable inserts and compatible with Sumitomo insert ranges, the holder simplifies tooling logistics and ensures access to widely available cutting grades. Fast changeover is facilitated by the M5x12 Torx screw (Torx T20) and the standardised clamping interface, reducing downtime during insert indexing or replacement. The tool head accommodates eight indexed cutting edges, enabling efficient use of each insert and fewer interruptions in production. Engineered for workshop reliability and flexible application Manufactured by Teknik Makina to meet industrial turning demands, the holder is suited to a range of external turning and profiling tasks on CNC lathes where square shoulders and precise axial positioning are required. The combination of a robust tool body, coolant capability and standard insert format makes it a pragmatic choice for jobbing shops and production lines seeking a balance of uptime, maintainability and predictable process behaviour. Secure reliable shoulder turning with Teknik Makina’s corner tool head — contact Metav Werkzeuge for tailored application advice and fast dispatch from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T298TM Manufacturer: Teknik Makina Product: Corner tool head (WNMU 0807) with internal coolant Facts Diameter: 80 mm Overall length: 50 mm Cutting angle: 90° Cutting edges: 8 Torx key: T20 Torx screw: M5x12 Special features Internal coolant channel Compatible with WNMU 0807 indexable inserts Compatible with Sumitomo insert grades Designed for shoulder turning and external profiling FAQ What inserts fit this tool holder? The corner tool head accepts WNMU 0807 indexable inserts and is specified as compatible with Sumitomo insert ranges for straightforward sourcing and grade selection. Does the holder provide coolant to the cutting edge? Yes, the tool head features internal coolant to the cutting zone, improving heat control and insert life during demanding turning operations. Which screw and key are required for insert clamping? Insert clamping uses an M5x12 Torx screw, tightened with a T20 Torx key for secure and repeatable insert fastening. Is this head suitable for forming 90° shoulders? The holder’s 90° cutting angle and stable 80 mm body are engineered for precise shoulder formation and repeatable square faces on external turning operations. What is the article number for ordering or reference? The article number (SKU) is T298TM, listed under Teknik Makina’s corner tool head for WNMU 0807 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Turning Head For XNKT 0604 Indexable Inserts L50mm With Internal Coolant - Teknik Makina
Combine robust machining performance with coolant-assisted tool life and precise insert compatibility for consistent, high-quality results; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Corner cutting head T856-1TM — 80 mm diameter, internal coolant (Teknik Makina) The Corner cutting head designed for precision indexable-insert machining, optimised for XNKT 0604 inserts and coolant-fed operations 80 mm diameter for stable cutting Integrated internal coolant Accepts XNKT 0604 indexable inserts Compatible with Korloy inserts Higher throughput through coolant-assisted cutting The tool head combines an 80 mm cutter diameter with an internal coolant supply to manage heat at the cutting zone. This design reduces thermal deformation and prolongs insert life, which directly improves process stability and lowers tooling costs per component. The assembly is balanced for repeatable performance, so workpiece tolerances remain consistent even during extended runs. By reducing rework and scrap rates, the component contributes to measurable productivity gains. Accurate shoulder and face results with defined geometry A 90° cutting angle and a cluster of 10 cutting edges provide a defined cutting geometry for square-shoulder and face operations. The right-angled geometry helps to maintain perpendicularity and surface finish without complex tool path adjustments. For machinists and production engineers seeking predictable material removal and less vibration, the combination of rigid design and optimised cutting layout delivers improved surface quality and process reliability. Quick insert changes and maintenance-friendly fastening Fast, secure clamping is achieved with the Torx T8 drive and M3x7 screws, enabling rapid insert replacement and straightforward maintenance. The central coolant channel reduces flank wear and stabilises cutting temperatures, which extends the life of both inserts and the holder. The tool’s overall length of 50 mm and compact mass support straightforward handling during changeovers, limiting downtime and simplifying toolroom logistics. Versatile use across indexable-insert machining applications Designed for use with XNKT 0604 indexable inserts and tested for compatibility with Korloy grades, the head suits mixed production environments where insert standardisation is preferred. Its balance of rigidity, coolant delivery and standardised fastening makes it a practical choice for shops aiming to consolidate tooling kits while maintaining flexibility across different materials and batch sizes. Trust in consistent component quality to support leaner inventory and steadier throughput. Contact Metav Werkzeuge to discuss the Teknik Cutting Tools corner cutting head T856-1TM, request application recommendations or place an order via +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: T856-1TM Label: 80 mm corner cutting head XNKT 0604 L50 mm with internal coolant Manufacturer: Teknik Makina E-class: 21181015 Numbers / Core technical data Diameter: 80 mm Overall length: 50 mm Shank / mounting diameter: 27 mm Weight: 0.938 kg Cutting edges: 10 Cutting angle: 90° Torx key: T8 Torx screw: M3x7 Special features / Versions Internal coolant: yes For indexable inserts: XNKT 0604 Compatible insert manufacturer: Korloy Product type: Corner cutting head SKU: T856-1TM FAQ Which insert type fits the tool head? The tool head is designed for XNKT 0604 indexable inserts and accepts Korloy-manufactured grades specified for that insert geometry. Does the holder provide coolant to the insert? Yes, the T856-1TM features internal coolant, supplying the cutting zone to reduce heat and extend insert life. What is the cutting angle and how does it affect results? The holder provides a 90° cutting angle, beneficial for square-shoulder and face machining where perpendicularity and surface finish are critical. Which fastening hardware is required for insert clamping? The holder uses Torx T8 screws in M3x7 size for secure and repeatable insert clamping. Is the tool suitable for high-volume production runs? With its coolant-fed design and balanced construction, the holder supports extended runs by lowering thermal stress and minimising insert wear, making it suitable for repetitive production tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Turning Head for XNKT 0805 Indexable Inserts 90° Cutting Angle, M4x10 Torx - Teknik Makina
Benefit from precise corner turning with a robust, compact tool head that accepts XNKT 0805 indexable inserts and secures with a Torx M4x10 clamp; the 90° cutting geometry and 27 mm shank combine for stable, repeatable results in high-volume turning. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Corner tool head T906TM by Teknik Makina — 90° cutting, for XNKT 0805 inserts Corner tool head T906TM designed as a compact holder for machining square shoulders and orthogonal cuts, optimised for industrial turning applications For XNKT 0805 indexable inserts 90° cutting geometry for square shoulders 27 mm shank for rigid turret mounting Torx M4x10 fastening with T15 key Stable clamping for consistent production quality The tool head delivers rigid clamping through its 27 mm shank, ensuring minimal deflection during shoulder and facing operations. Fitted to accept XNKT 0805 indexable inserts (compatible with Korloy grades), the holder's construction and mounting interface reduce vibration and tool chatter, which improves surface finish and extends insert life. Precise mechanical retention is provided by the Torx M4x10 screw tightened with a T15 key, giving reproducible seating with every insert change. Geometry tailored to efficient, repeatable corner turning A true advantage of the 90° configuration is repeatable, orthogonal cutting performance: the 90° cutting angle positions the insert for square-shoulder machining without complex tool offsets. The tool head’s 80 mm head diameter and compact overall length of 50 mm balance accessibility and strength, helping to maintain cycle times while delivering consistent dimensional results. Where process reliability matters, this holder supports predictable tool life and reduced scrap rates thanks to its engineered geometry and steady cutting engagement. Fast changeover, low maintenance and robust handling Designed for shop-floor practicality, the holder accommodates quick insert swaps and secure retention — the clamping screw (M4x10) and accompanying T15 key enable straightforward servicing and minimal downtime. With seven cutting edges available per insert seating arrangement and a mass of 1.015 kg, the assembly feels balanced yet substantial in the turret, aiding vibration damping. Routine checks are limited to screw torque and insert seating; the compact design keeps maintenance simple while supporting intensive production schedules. Discuss application requirements with Metav Werkzeuge for tailored advice and reliable supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T906TM Brand: Teknik Makina Product: Corner tool head Shank diameter: 27 mm Head diameter: 80 mm Cutting angle: 90° Overall length: 50 mm Weight: 1.015 kg Cutting edges: 7 Torx screw: M4x10 Torx key size: T15 For XNKT 0805 indexable inserts Compatible with Korloy inserts SKU: T906TM Storytrigger: eckmesserkopf FAQ What inserts fit this tool head? The corner tool head T906TM is designed for XNKT 0805 indexable inserts and is compatible with the Korloy range specified for that insert size. Which shank size is required for mounting? Mounting requires a 27 mm shank seat; the holder is machined for rigid engagement in standard turret pockets that accept that diameter. How is the insert secured in the holder? Insert retention is achieved with a Torx M4x10 clamping screw tightened using a T15 key, providing consistent seating and repeatability for the tool head. Is the 90° geometry suitable for shoulder turning? Yes — the 90° cutting angle is intended for orthogonal cuts and square-shoulder machining where a true perpendicular face is required. What maintenance does the holder need? Maintenance for the T906TM is minimal: periodic torque checks on the clamping screw, inspection of the insert seat, and cleaning of the contact surfaces to preserve repeatability. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Corner Turning Head for XOMX 1204 Indexable Inserts L50mm Internal Coolant - Teknik Makina
Combine robust 80 mm cutting engagement, internal coolant and direct compatibility with SECO XOMX 1204 indexable inserts for dependable corner machining; order the component directly via Metav Werkzeuge or consult our specialists for application advice. Corner milling head (T516-1TM) – 80 mm diameter, internal coolant, for XOMX 1204 indexable inserts by Teknik Makina The Corner milling head for XOMX 1204 indexable inserts offers a compact solution for precise 90° corner machining and radial milling operations in CNC production environments. 80 mm diameter for wider engagement Internal coolant for improved chip control Compatible with SECO XOMX 1204 inserts 90° cutting angle for accurate corner finishes Increased productivity with stable engagement The compact milling assembly is built around an 80 mm diameter cutting circle that enables wider axial engagement, reducing the number of tool passes required for many slotting and cornering operations. With seven cutting edges arranged for balanced load distribution and a true 90° cutting angle, the head supports consistent geometry and repeatable results on serial parts. This configuration contributes directly to shorter cycle times and steadier surface quality in batch production, making the unit a reliable element in a production-minded toolset. Controlled cooling and chip evacuation for longer tool life Equipped with internal coolant, the indexable head directs cutting fluid close to the insert contact zone to aid temperature control and chip evacuation. That focused supply reduces thermal stress at the cutting edge and helps maintain a steady cutting condition, which extends insert life and stabilises surface finish. For workshops aiming to reduce unplanned downtime, this internal channeling supports more predictable wear behaviour and simpler process parameter management. Fast insert changes and robust fastening for workshop efficiency Designed for use with XOMX 1204 inserts from SECO, the head secures inserts with a M3.5x8.5 Torx screw operated via a T10 key, enabling quick index and replacement cycles. The assembly’s compact 50 mm overall length and mass of 1.155 kg provide a good balance for many CNC spindles and toolholders, aiding in machine stability and repeatability during higher-feed operations. The straightforward mechanical interface reduces handling time during maintenance and supports efficient tooling workflows. Ideal for job shops and production lines seeking consistency The indexable head performs well where repeated, accurate cornering and radial cutting are required—job shops, toolrooms and small production lines will find the component especially useful for mixed-batch work. The combination of a wide cutting diameter, internal coolant and standardised insert compatibility simplifies inventory management and tool planning, while also providing operators with a dependable solution for routine and demanding machining tasks. Request a technical consultation for the T516-1TM corner milling head from Metav Werkzeuge in Emmerich to confirm suitability for the intended application and to arrange supply; contact info@metav-werkzeuge.com or +49 2822 7131930 for specialist advice Technical Data SKU: T516-1TM Product type: Corner milling head Designation: 80 mm corner milling head for XOMX 1204 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 80 mm Overall length: 50 mm Weight: 1.155 kg Cutting angle: 90° Cutting edges: 7 Special features Internal coolant Compatible with SECO XOMX 1204 inserts Torx screw: M3.5x8.5 Torx key: T10 eClass: 21181015 FAQ Which inserts fit this corner milling head? The T516-1TM corner milling head is designed for XOMX 1204 indexable inserts and is compatible with inserts from SECO. Does the tool provide internal coolant? Yes, the T516-1TM features internal coolant to support chip removal and thermal control at the cutting edge. What are the main dimensions and mass of the head? The indexable head has a 80 mm diameter, 50 mm overall length and a mass of 1.155 kg. How are the inserts fastened? Inserts are secured with a M3.5x8.5 Torx screw; a T10 Torx key is used for tightening and replacement. Which machining tasks is this head suited for? The T516-1TM by Teknik Makina is suited to 90° corner machining and radial milling in CNC setups, ideal for job shops and production environments requiring consistent corner geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Turning Tool Head For LNHU 1306 Indexable Inserts 90° Cutting Angle, M4x10 Screw - Teknik Makina
Take advantage of precise 90° geometry and a rigid Ø27 mm shank to ensure repeatable external turning results; the compatibility with LNHU 1306 indexable inserts keeps tool changeovers efficient. Order via Metav Werkzeuge or contact our advisors for specification support. Corner turning head – 90° cutting angle, accepts LNHU 1306 indexable inserts (Teknik Makina) A compact corner turning head engineered for external turning operations on lathes, designed to accept LNHU 1306 indexable inserts and provide stable cutting performance in workshop environments. 90° cutting geometry for precision turning Shank Ø27 mm for stable clamping Accepts LNHU 1306 indexable inserts M4x10 Torx clamping screw with T15 key Precision geometry for consistent external turning The robust 90° cutting angle delivers a predictable cutting line and reduced setup iterations, which translates into less scrap and higher first-pass accuracy. The holder’s Ø27 mm shank provides secure clamping in standard tool posts, helping to minimise vibration and maintain dimensional tolerances during turning cycles. With an overall length of 50 mm and a compact Ø80 mm head diameter, the configuration keeps projection low, thereby reducing deflection and improving surface finish on turned components. Fast insert replacement and secure clamping Designed to accept LNHU 1306 indexable inserts, the tool head is compatible with common insert geometries from third-party suppliers such as Walter, simplifying supply logistics. The clamp is secured with an M4x10 Torx screw operated with a T15 key, enabling straightforward tightening and repeatable seating of the insert. The head presents 7 cutting edges in its insert arrangement, optimising edge utilisation and service intervals; operators familiar with indexable systems will appreciate the reduced non-cutting time during insert changes. Built for workshop integration and dependable operation Weighing 1.315 kg, the turning head combines mass for stability with a compact footprint suitable for both jobbing and production environments. The design supports common lathe set-ups and is intended for external turning tasks where a precise 90° approach is required. By standardising on a reliable holder that accepts established insert types, shops can lower tooling complexity and maintain throughput. Metav’s distribution ensures steady availability from the Emmerich stock, backed by decades of distribution experience to support smooth supply and predictable lead times. Discuss the Teknik Cutting Tools corner turning head with Metav Werkzeuge to confirm suitability for specific machines and applications — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored technical advice and ordering support Technical data Article number: T582TM Brand: Teknik Makina Product type: Corner turning head Facts Shank diameter: 27 mm Weight: 1.315 kg Cutting angle: 90° Head diameter: 80 mm Overall length: 50 mm Number of cutting edges: 7 Special features Accepts LNHU 1306 indexable inserts Compatible with Walter inserts Torx clamping screw M4x10 Torx key size T15 FAQ What inserts does the turning head accept? The holder is designed for LNHU 1306 indexable inserts and is compatible with insert types supplied by Walter, ensuring broad availability of spare cutting edges. What is the shank diameter and how does it affect clamping? The tool head uses a Ø27 mm shank, which provides a secure fit in compatible tool posts and reduces vibration for improved cutting stability. Which screw and key are used for insert clamping? Insert clamping is performed with an M4x10 Torx screw tightened with a T15 key to ensure reliable seating and repeatability. Is the turning head suitable for production turning? Yes, the compact geometry, 90° cutting angle and mass (1.315 kg) make the head suitable for both jobbing and repetitive production turning where stable, repeatable cuts are required. What is the article number for ordering or reference? The article number (SKU) for reference is T582TM, which can be quoted when discussing specifications with Metav Werkzeuge or when ordering. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Corner Turning Tool Head for XOMX 1204 Indexable Inserts, 90° Cutting Angle, M3.5x8.5 Torx - Teknik Makina
Take advantage of a robust combination of secure mounting and precise geometry: the head’s 90° cutting angle and 27 mm shank ensure stable corner turning with XOMX 1204 inserts, while the Torx M3.5x8.5 fastening provides repeatable clamping. Order the tool head via Metav Werkzeuge or consult our specialists for application-specific guidance. Corner tool head — 90° indexable-insert holder by Teknik Cutting Tools The Corner tool head is a compact indexable-insert holder engineered for 90° turning and finishing operations, compatible with XOMX 1204 indexable inserts and designed for use in precision lathe setups. Compatible with XOMX 1204 indexable inserts 90° cutting angle for accurate corner turning 27 mm shank for secure mounting Torx M3.5x8.5 fastening, T10 key specification 80 mm head, 50 mm overall length Engineered accuracy and interchangeability for turning tasks This indexable-insert holder delivers predictable results through its 90° cutting angle and precise geometry. The design suits repetitive corner turning where consistent tool orientation matters; by pairing the head with XOMX 1204 inserts and recognised manufacturers such as SECO, the system reduces setup variation and simplifies tool management. The solid 27 mm shank provides firm clamping in standard toolholders, reducing micro-movement that can affect surface finish and dimensional consistency. For workshop planners and production engineers, the technical simplicity translates directly into shorter setup times and fewer scrapped parts, supporting measurable gains in throughput and process reliability. Built for secure clamping and straightforward maintenance A focus on mechanical reliability is evident in the fastening concept: the Torx M3.5x8.5 screw and T10 key specification enable repeatable torque application and straightforward maintenance procedures. Where tool changes are frequent, the ability to re-seat the insert and achieve consistent clamping without extensive adjustment reduces machine downtime. The head’s 80 mm diameter and 50 mm overall length balance rigidity and accessibility, enabling operators to reach confined work zones while maintaining the cutting geometry. Specified mass of 1.155 kg provides a stable feel in the turret and aids vibration damping during interrupted cuts, contributing to an improved surface finish and longer insert life. Productivity advantages for industrial and jobbing shops The assembly is tailored to industrial shop use: compatibility with XOMX 1204 indexable inserts and SECO-style standards gives access to a wide range of grades and chipbreakers, allowing optimal selection for steel, alloyed materials or finishing passes. The concise head dimensions and robust shank present a low-profile solution that reduces collision risk in multi-tool turrets and maximises clearance. Choosing this style of indexable-insert holder is a rational decision for operations seeking to standardise tooling across multiple machines while maintaining performance — a practical route to lower tooling complexity and predictable maintenance schedules. Metav’s position as a precision partner, with a broad product range and established logistics from Emmerich, supports fast fulfilment and reliable supply for production-critical tooling. For application-specific recommendations and to confirm compatibility with existing toolholders, contact Metav Werkzeuge for purchasing and technical consultation: info@metav-werkzeuge.com or +49 2822 7131930 — request the Teknik Cutting Tools Corner tool head T516TM for prompt processing Technical data SKU: T516TM Manufacturer: Teknik Cutting Tools Product type: Corner tool head / indexable-insert holder Compatible inserts: XOMX 1204 indexable inserts Compatible insert manufacturer: SECO Numbers Shank diameter: 27 mm Head diameter: 80 mm Overall length: 50 mm Cutting angle: 90° Weight: 1.155 kg Designs / special features Torx screw: M3.5x8.5 Torx key size: T10 Seven cutting edges configuration Compact profile for turret clearance Robust construction for industrial turning FAQ Which inserts fit this tool head? The Corner tool head is designed for XOMX 1204 indexable inserts; compatibility with SECO-style geometry is specified to ensure interchangeability and access to multiple grades. What are the mounting and fastening specifications? The holder uses a 27 mm shank diameter for mounting and secures inserts with a Torx M3.5x8.5 screw; the Torx key specification is T10 for consistent tightening of the insert clamp. What cutting angle and dimensions should be expected? The assembly provides a 90° cutting angle, an 80 mm head diameter and a 50 mm overall length, delivering the orientation and clearance commonly required for corner turning operations; refer to SKU T516TM for exact ordering. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Turning Tool Holder for LNMX 1510 Indexable Inserts, 90° Cutting Angle, M4x12.5 Fixing - Teknik Makina
A compact 90° corner turning head with a sturdy 27 mm shank and compatibility with LNMX 1510 indexable inserts, designed to cut setup time and deliver consistent shoulder turning. Order the corner turning head directly via Metav Werkzeuge or ask our consultants if needed. Corner turning head — 90° tool head for LNMX 1510 indexable inserts (Teknik Makina) Corner turning head for LNMX 1510 indexable inserts, suited to right‑angle turning operations on lathes and turning centres. 90° cutting angle for precise shoulder turning 27 mm shank for secure toolholder interface Fits LNMX 1510 indexable inserts from major brands Secured with M4x12.5 Torx screw (T15) Accurate shoulder turning with repeatable geometry The 90° configuration provides a clear geometric advantage when producing shoulders and faces: the 90° cutting angle reduces set‑up complexity and helps maintain a consistent contact angle between insert and workpiece. This results in improved dimensional repeatability and a reduction in manual rework. Using an indexable system simplifies insert changeovers and keeps downtime to a minimum, which translates into measurable productivity gains for batch and single‑piece production alike. Secure mounting for stable cutting performance A solid toolholder interface is essential for vibration damping and surface finish quality. The head's 27 mm shank ensures a tight fit in standard toolholders, while the fixation with an M4x12.5 Torx screw (requiring a T15 key) provides positive clamping of the insert pocket. The assembly’s mass contributes to stability during interrupted or heavy cuts, helping to preserve insert life and maintain consistent cutting conditions under varied machining loads. Broad insert compatibility to simplify tool procurement Designed for the LNMX 1510 insert form, the turning head accepts inserts from established makers such as ISCAR, Korloy, LMN and YG‑1, allowing existing tooling stocks to be used without bespoke reordering. The head’s roughly 80 mm head diameter and seven available cutting edges support a range of turning tasks while reducing the variety of specialised holders needed on the tool trolley. This compatibility reduces procurement complexity and enables quicker replacement cycles in production environments. For tailored technical advice and dependable supply from Emmerich, contact Metav Werkzeuge to procure the Teknik Cutting Tools corner turning head T376TM and ensure timely delivery from a trusted precision partner Technical data SKU: T376TM Designation: Corner turning head for LNMX 1510 indexable inserts Brand: Teknik Makina Facts Shank diameter: 27 mm Weight: 1.087 kg Cutting angle: 90° Head diameter: 80 mm Number of cutting edges: 7 Overall length: 50 mm Fixing screw: M4x12.5 Special features For LNMX 1510 indexable inserts Compatible with ISCAR, Korloy, LMN, YG‑1 Secured with Torx T15 Right‑angle corner configuration SKU T376TM FAQ What is the primary application for this turning head? The corner turning head is intended for right‑angle shoulder and face turning operations using LNMX 1510 indexable inserts, providing accurate geometry for finishing and roughing passes. Which insert types are compatible with the head? Compatibility includes LNMX 1510 indexable inserts from ISCAR, Korloy, LMN and YG‑1, allowing flexible sourcing of cutting grades and geometries. What secures the insert in the pocket? An M4x12.5 Torx screw secures the insert; a T15 key is used for tightening, ensuring stable clamping during machining. What are the key dimensions to check for toolholder fit? Key dimensions are the shank diameter of 27 mm and the overall length of 50 mm; the head diameter is 80 mm and should be checked against toolpost clearance. Is this component supplied under a specific SKU for ordering? Yes, the component is listed under SKU T376TM, which can be referenced when enquiring with Metav Werkzeuge or placing an order. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Cutter For BLMP 0904 Indexable Inserts L50mm, 8 Teeth, 100° Rake - Teknik Makina
Take advantage of the stable machining performance and broad compatibility offered by this face milling solution: 80 mm diameter combined with eight cutting edges delivers efficient material removal, while compatibility with BLMP 0904 indexable inserts ensures simple tool sourcing. Order the face milling head directly via Metav Werkzeuge or consult their specialists for integration advice. Face milling head T487-3TM for BLMP 0904 indexable inserts – 80 mm diameter, 8 cutting edges (Teknik Makina) The Face milling head T487-3TM is a robust cutting head designed for face milling applications using BLMP 0904 indexable inserts, providing an 80 mm diameter and a 50 mm overall length for stable, high-precision surface finishing Face milling head for BLMP 0904 inserts 80 mm diameter for wide surface coverage Eight cutting edges for efficient material removal Torx T10 screws; M3.5×8.5 fixing Increased throughput through stable geometry and multiple edges The milling head's 80 mm diameter and eight cutting edges combine to raise material removal rates while maintaining surface quality. The 100° cutting angle reduces cutting forces and improves chip control, which in turn lowers vibration and tool wear during continuous operation. This geometry is particularly effective on broad workpieces where consistent face finish and cycle-time reduction are priorities. The design supports predictable tool life and simplifies production planning by enabling multiple indexings before insert replacement. Fast insert changes and proven compatibility to reduce downtime Compatibility with BLMP 0904 indexable inserts and the acceptance of Taegutec inserts guarantee widely available tooling options and straightforward supply chains. Fixing is secured with Torx T10 drive screws and M3.5×8.5 torx screws, enabling rapid, repeatable insert replacement with common workshop tools. The combination of standardised inserts and Torx fastenings minimises service time and helps maintain machine uptime, which is essential for shops aiming to keep spindle utilisation high. Practical integration for workshop and production environments With an overall length of 50 mm and a mass of 1.238 kg, the head balances rigidity with manageable handling during tool setup. The SKU T487-3TM facilitates inventory management and ordering; labelling and dimensions support straightforward tool magazine programming. For production planners, the plurality of cutting edges improves cost-in-use by extending the interval between indexings, and the robust construction contributes to repeatable results across shifts. Delivered from established suppliers, this milling head suits both jobbing shops and serial production where stable face milling is required. Contact Metav Werkzeuge in Emmerich for tailored integration advice and a supply quote for the T487-3TM face milling head Technical details SKU: T487-3TM Label: 80mm Planmesserkopf BLMP 0904 L50mm Product type: Face milling head Manufacturer: Teknik Makina UID: T487-3TM eClass: 21181015 Core specifications Diameter: 80 mm Overall length: 50 mm Weight: 1.238 kg Cutting edges: 8 Cutting angle: 100° Fixing screw: M3.5×8.5 Torx key: T10 Features / Compatibility For BLMP 0904 indexable inserts Compatible with Taegutec inserts Torx T10 drive for secure fastening Labelled for straightforward identification Robust construction for face milling FAQ Which insert type fits this milling head? The milling head accepts BLMP 0904 indexable inserts; compatibility with Taegutec-manufactured inserts is confirmed for the T487-3TM. What is the diameter and overall length of the tool? The tool has an 80 mm diameter and a 50 mm overall length, dimensions that support stable face milling and simple tool magazine programming. How many cutting edges are available before re-indexing? The head provides eight cutting edges, enabling multiple indexings to extend time between insert changes and improve cost-in-use. Which screw system secures the inserts? Inserts are secured with Torx fastenings; the design uses a T10 key and M3.5×8.5 screws for repeatable, secure clamping. Is the T487-3TM suitable for serial production? Yes, the head's construction, multiple cutting edges and standard insert compatibility make the T487-3TM appropriate for both jobbing and serial production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Cutter For SEET R245 12T3 Indexable Inserts 45° Cutting Angle, 6 Cuts - Teknik Makina
Benefit from a robust 80 mm cutter diameter and a precise 45° cutting geometry that deliver consistent face quality and stable cutting forces. The head accepts SEET 12T3 R245 indexable inserts from major brands, enabling fast edge changes and continuous production. For ordering or technical advice, contact Metav Werkzeuge or speak with a consultant for tailored specification support. Planing cutter head T564TM by Teknik Cutting Tools — 80 mm diameter, for SEET 12T3 R245 indexable inserts A Planing cutter head T564TM designed for face milling with SEET 12T3 R245 indexable inserts, compatible with inserts from Sandvik, XTC and ZCC for reliable finishing and light roughing applications 80 mm cutter diameter Compatible with SEET 12T3 R245 inserts Six cutting edges for efficient material removal 27 mm shank for secure clamping Predictable surface finish from the 45° cutting geometry The incorporated 45° cutting angle produces a balanced combination of shear and compression that reduces vibration and creates a more consistent surface. This geometry is especially effective when working on workpieces that require a fine planed finish; the slightly inclined approach spreads cutting forces over more of the insert, lowering peak loads and improving edge life. The result is fewer interruptions for rework and a reliable finish across serial production runs, which supports efficient process planning. Secure mounting and broad insert compatibility to shorten setup time A 27 mm mount diameter and a dedicated clamp plate (TA052) provide straightforward and repeatable fixation. The head accepts SEET 12T3 R245 inserts and is compatible with insert manufacturers such as Sandvik, XTC and ZCC, allowing the use of common grade and geometry variants already held in many tool inventories. Fast replacement is facilitated by the specified screws (Torx M3.5x11 and hex M5x7), and the Torx key size T15 matches the supplied fixing hardware, reducing changeover time and minimising production downtime. Dimensioned for production stability and manageable handling With an 80 mm diameter, an overall length of 50 mm and a mass of 1.206 kg, the tool balances rigidity and accessibility at the cutting edge. The arrangement of six cutting edges distributes cutting load and enables staged material removal, which supports both finishing passes and modest stock removal. Compact dimensions assist in maintaining spindle balance and accessibility in confined set-ups while the use of indexable inserts keeps maintenance simple: worn edges are replaced quickly, not the whole tool, which helps keep throughput high. For specification assistance or to check availability of the Teknik Cutting Tools T564TM planing cutter head, contact Metav Werkzeuge in Emmerich for expert guidance and rapid supply coordination Technical data SKU: T564TM Manufacturer: Teknik Makina Designation: Planing cutter head for SEET 12T3 R245 indexable inserts Compatible insert brands: Sandvik; XTC; ZCC Clamp plate: TA052 Torx screw: M3.5x11 Hex screw: M5x7 Torx key size: T15 Numbers / Core data Diameter: 80 mm Shank / mount diameter: 27 mm Overall length: 50 mm Weight: 1.206 kg Cutting edges: 6 Cutting angle: 45° Materials & special features For SEET R245 12T3 indexable inserts Compatible with common industrial insert grades Supplied fixing sizes suitable for straightforward maintenance Compact form factor for stable finishing performance FAQ Which inserts fit this cutter head? The head is designed for SEET 12T3 R245 indexable inserts; compatible suppliers include Sandvik, XTC and ZCC. What is the mount diameter for installation? The tool has a 27 mm mount diameter for secure clamping in suitable toolholders. How many cutting edges are provided and what does that mean for run time? The head uses six cutting edges; this allows staged wear management and quicker on-machine edge changes, improving effective run time. Is the cutter suitable for finishing operations? Yes, the 45° cutting geometry provides a balanced cut ideal for consistent surface finish in finishing and light roughing tasks. Which screws and keys are required for insert clamping? Fixing uses Torx M3.5x11 and hex M5x7 screws; the Torx key size is T15 for the Torx screws. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Cutter Head 45° For ONMU 0505 Indexable Inserts, M5x12 Torx T20 - Teknik Makina
Take advantage of a robust facing solution that combines secure clamping, proven compatibility and a geometry tuned for fine surface results; the Planmesserkopf is optimised for ONMU 0505 inserts and rapid insert changes, so workshop throughput is improved. Order the facing cutter head directly via Metav Werkzeuge or ask the consultants for tailored integration advice. Planmesserkopf (Facing cutter head) T796TM — Ø80 mm, 45° cutting angle by Teknik Makina Planmesserkopf as a facing cutter head for machining operations with ONMU 0505 indexable inserts, designed for stable cutting and straightforward maintenance in industrial environments Ø 80 mm facing head, robust design 45° cutting angle for smooth finishing Compatible with ONMU 0505 indexable inserts Torx M5x12 screw, T20 key for secure clamping Built for consistent facing and verified insert compatibility The Planmesserkopf T796TM is engineered for facing operations where repeatable geometry and predictable chip control matter. Accepting ONMU 0505 style indexable inserts — and compatible with ISCAR insert variants — the head removes uncertainty when selecting tooling, allowing integration into existing tool setups without modification. Its design emphasises a stable contact face and predictable tool life, which supports steady production cycles and reduces rework. Secure clamping that shortens maintenance intervals Clamping is handled via a Torx screw arrangement that uses an M5x12 screw and a T20 key, providing positive axial force and repeatable seating of the insert pocket. This arrangement reduces the risk of micro-movement under load and simplifies routine servicing: insert changes and retorques are fast and require only commonly available tools. The result is less downtime and a more reliable toolholding system in daily use. Cutting geometry optimised for surface quality The head’s 45° cutting angle is selected to balance cutting forces and surface integrity, producing a controlled chip flow and improved finish on machined faces. With 7 cutting edges, the geometry disperses cutting loads across multiple contact points, which helps maintain dimensional stability and reduces vibration during facing passes. The geometry is particularly useful for applications where a steady, even finish and consistent material removal are priorities. Workshop dimensions and handling for smooth integration Key installation dimensions support straightforward fitting to standard toolholders: Ø80 mm body diameter, mounting diameter 27 mm, overall length 50 mm and a weight of 1.202 kg. These measurable characteristics enable planning for balance, clearance and tool change cycles, and they assist in choosing the correct adaptor or arbor. The component’s compact length suits many setups where space is limited but robust cutter engagement is required. For reliable workshop supply and professional advice on integrating the Teknik Makina facing cutter head T796TM into production, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and lead times. Technical data Article number: T796TM Manufacturer: Teknik Makina Designation: Planmesserkopf Secondary designation: for ONMU 0505 Indexable Inserts Compatible insert manufacturer: ISCAR Torx screw: M5x12 Torx key: T20 Core technical data Diameter: 80 mm Mounting diameter: 27 mm Cutting angle: 45° Number of cutting edges: 7 Overall length: 50 mm Weight: 1.202 kg Special features For ONMU 0505 indexable inserts Compatible with ISCAR inserts Torx M5x12 screw and T20 key for clamping Files: 2 attached documents FAQ What inserts fit this facing cutter head? The Planmesserkopf T796TM by Teknik Makina is designed for ONMU 0505 indexable inserts and is specified as compatible with ISCAR insert types of the same family. Which screw and key are required for clamping? Clamping uses an M5x12 Torx screw and a T20 Torx key; this arrangement is specified for the Planmesserkopf T796TM to ensure secure and repeatable seating. What are the mounting and overall dimensions to check before ordering? Relevant dimensions are Ø 80 mm body diameter, 27 mm mounting diameter and overall length 50 mm, with a weight of 1.202 kg, which should be verified against the machine’s toolholder and clearance envelope. How does the 45° cutting angle affect finished surfaces? A 45° cutting angle reduces peak cutting forces and promotes smoother chip removal, which assists in achieving an even finish on facing operations when using the Planmesserkopf T796TM. How many cutting edges are available on the head? The cutter head is specified with 7 cutting edges, allowing load distribution and improved stability during facing passes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Cutter Head for 100° ENMX 0905 Indexable Inserts, 8 Cutting Edges, 27mm Shank - Teknik Makina
A compact, high‑precision face‑milling head with 100° cutting geometry and compatibility with ENMX 0905 indexable inserts delivers consistent face finishes and reduced tool changes; its Ø80 mm diameter and 8 cutting edges balance accessibility with productivity. Order the face‑milling head directly via Metav Werkzeuge or request an application check from the consultants. Face‑milling head T703TM — 100° cutting geometry, for ENMX 0905 indexable inserts, Teknik Makina The face‑milling head T703TM is a purpose‑built toolholder designed for efficient face milling using ENMX 0905 indexable inserts in production and workshop environments. Compatible with ENMX 0905 inserts 100° cutting geometry for stable cuts Compact Ø80 mm body for tight spaces Eight cutting edges for longer service life Higher material removal rates with controlled cutting geometry The 100° cutting angle provides a flatter entry angle than steeper cutters, which reduces vibration and spreads cutting forces across the insert edge. This results in smoother surface finish and more predictable tool life during face milling operations. With a modest Ø80 mm diameter the head is also suitable where access is limited, enabling short overhangs and improved rigidity. The combination of cutting geometry and compact dimensions directly supports faster cycle times and consistent part quality in batch and single‑piece production. Fewer interventions and quicker servicing for maximum uptime Compatibility with ENMX 0905 indexable inserts from YG‑1 simplifies stocking and regrinding routines, while the secure clamping using M3.5×8.5 Torx screws and a T10 key ensures repeatable seating and quick insert changes. The 27 mm tool shank provides a rigid connection to common toolholders, reducing chatter and minimising the need for mid‑shift adjustments. These features together lower maintenance frequency and shorten downtime between operations, supporting continuous workflows on the shopfloor. Robust design that supports reliable workshop supply chains With eight cutting edges the head offers effective distribution of wear, which reduces the number of insert indexes per finished part and improves cost efficiency over time. The assembly is engineered for routine industrial use and straightforward servicing, meaning fewer surprises for production managers and purchasing. Sourced via Metav Werkzeuge, the product benefits from a European supply chain with local warehousing in Emmerich, ensuring dependable delivery and an experienced advisory layer for integration into existing machining centres. For an application compatibility check and to secure reliable supply of this Teknik Cutting Tools face‑milling head, contact Metav Werkzeuge's specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange procurement and technical advice. Technical data Article number: T703TM Name: Face‑milling head (Planmesserkopf) Manufacturer: Teknik Makina Suitable for inserts: ENMX 0905 Compatible insert maker: YG‑1 Data Diameter: 80 mm Overall height: 50 mm Shank diameter: 27 mm Cutting angle: 100° Number of cutting edges: 8 Special features Torx key size: T10 Torx screw: M3.5×8.5 Designed for ENMX 0905 indexable inserts Suitable for workshop and production use FAQ Which indexable inserts fit this head? The head is designed for ENMX 0905 indexable inserts and is compatible with inserts supplied by YG‑1. How is the insert secured in the cutter? Insert clamping is achieved with M3.5×8.5 Torx screws using a T10 key for secure and repeatable seating. What is the effective diameter and why does it matter? The effective diameter is 80 mm, a size that offers a balance of accessibility in tight work areas and sufficient cutting engagement for efficient face milling. Can the head be mounted on standard toolholders? The head has a 27 mm shank diameter, which is compatible with many common toolholder systems; verification against the machine spindle/toolholder specification is recommended. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Cutter Head For ONMX 0606 Indexable Inserts 6 Cutting Edges 45° Cutting Angle, 27mm Shank Diameter, M5x12 Torx Screw - Teknik Makina
Take advantage of the robust combination of an 80 mm diameter and six cutting edges with a 45° cutting angle to achieve reliable facing results and consistent surface finish; order via Metav Werkzeuge or request guidance from their consultants for seamless integration into production. Planing cutter head T791TM — 80 mm diameter, 6 cutting edges (Teknik Cutting Tools) A planing cutter head engineered for facing and light milling operations using ONMX 0606 indexable inserts, suitable where secure clamping and swift insert replacement are required. 80 mm diameter for broad machining Fits ONMX 0606 indexable inserts 45° cutting angle for smooth surface 27 mm mounting shank, weight 1.11 kg Consistent surface quality through stable geometry The robust head geometry delivers high stability during facing passes, which translates into predictable surface finish and reduced rework. The large 80 mm diameter together with six cutting edges spreads cutting forces and reduces chatter, while the 45° cutting angle supports controlled chip formation for a cleaner part face. These engineering choices minimise vibrations and enable steady material removal rates, improving cycle time without sacrificing precision. Fast insert changes and secure clamping reduce downtime Compatibility with ONMX 0606 indexable inserts and established insert manufacturers such as Korloy allows the mount to be stocked and serviced easily. The inserts are secured with M5x12 Torx screws tightened with a T20 key, enabling quick changeovers and consistent seating of the cutting edge. Reduced changeover time directly benefits throughput: fewer interruptions for maintenance and more predictable shift planning in a production environment. Practical mounting and handling for workshop workflows A 27 mm mounting shank and overall length of 50 mm provide a compact yet rigid interface for common turning and milling adaptors, while a measured mass of 1.11 kg helps dampen minor tool vibrations without overloading the spindle. The head’s design prioritises accessibility to the fastening screws and a clear insert pocket for straightforward inspection and replacement. This simplicity supports reliable daily operation and straightforward upkeep in medium‑volume machining contexts. Discuss application requirements with Metav Werkzeuge to specify the Teknik Cutting Tools T791TM for improved facing performance and to arrange supply from Emmerich. Technical data SKU: T791TM Article: Planing cutter head for ONMX 0606 indexable inserts Brand: Teknik Makina Facts Diameter: 80 mm Number of cutting edges: 6 Cutting angle: 45° Mounting shank diameter: 27 mm Overall length: 50 mm Weight: 1.11 kg ECLASS: 21180902 Special features Compatible inserts: ONMX 0606 Compatible insert manufacturer: Korloy Fastening: M5x12 Torx screws Torx key size: T20 FAQ Which insert type fits this head? The head is designed for ONMX 0606 indexable inserts; the Teknik Cutting Tools planing cutter head T791TM accepts these inserts as standard. Which screw and key are required for insert clamping? Insert clamping uses M5x12 Torx screws secured with a T20 key for consistent torque and repeatable seating on the Teknik Cutting Tools T791TM. What are the primary dimensions for mounting? Key mounting dimensions are a 27 mm mounting shank and an 80 mm head diameter for the planing cutter head T791TM, with an overall length of 50 mm. How many cutting edges does the head provide and why does that matter? The head carries six cutting edges, which distribute cutting forces and reduce chatter, enhancing surface finish and enabling steadier material removal. Is the tool suitable for rapid production changeovers? Yes; the combination of indexable ONMX 0606 inserts and standard M5x12/T20 fastening allows quick insert replacement, supporting reduced downtime in production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Cutter Head for SDMT 1204 Indexable Inserts, 6 Cutting Edges, 27mm Shank - Teknik Makina
Take advantage of a compact, robust solution that combines precise indexable-insert mounting with easy maintenance and secure clamping; the result is consistent face-milling performance backed by proven compatibility and clear ordering via Metav Werkzeuge. Face milling head T360TM — for SDMT 1204 indexable inserts, Ø80 mm, 6 cutters by Teknik Makina The face milling head T360TM is a compact milling cutter head designed for secure mounting of SDMT 1204 indexable inserts and efficient face-milling tasks in modern machining environments. Ø 80 mm head diameter 6 indexable cutting edges Compatible with SDMT 1204 inserts (ZCC) 27 mm shank / arbor diameter Stability and repeatability for reliable face milling The T360TM delivers mechanical stability through a balanced head geometry and six evenly spaced cutting positions. A larger contact radius from the Ø 80 mm body reduces vibration and helps maintain a consistent tool path during interrupted cuts, which leads to more predictable surface finish and fewer reworks. The tool's mass of 1.051 kg contributes to steady cutting dynamics without adding unnecessary inertia to the spindle. For production planners and toolroom managers this means lower scrap rates and improved process reliability when using indexable tooling. Secure clamping and fast indexable-insert changes Designed specifically for SDMT 1204 indexable inserts, the head uses an M4x10 Torx screw with a T15 key for positive, repeatable clamping. Proper clamping minimises insert micro-movement and keeps cutting geometry constant across multiple indexing cycles. The compatibility with ZCC-manufactured inserts ensures access to widely available grades and geometries, which simplifies restocking and standardises tooling across machines. Reduced changeover time translates into less unproductive machine downtime and quicker return to full production. Practical benefits that reduce total processing time The six cutting-edge layout distributes cutting forces evenly, enabling higher feed per tooth under the same spindle load compared with fewer-tooth alternatives. That distribution, combined with the compact 27 mm arbor interface, supports quick mounting in holders and adaptors commonly found in CNC tool magazines. The combination of secure fixing and accessible insert replacement helps maintenance teams complete routine swaps swiftly, decreasing machine idle time and boosting throughput across batches. Where this head fits in the workshop workflow This milling head is intended for operators and engineers who require a compact, indexable solution for face milling with SDMT 1204 inserts. It integrates easily into existing tool inventories and is suitable for setups where frequent insert indexing and straightforward serviceability are priorities. The design focuses on delivering consistent cutting behaviour and minimised setup complexity rather than on claims about specific workpiece materials; specification-aligned inserts should be selected based on the intended machining application. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Makina T360TM into production, request detailed compatibility information or a quotation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T360TM Manufacturer: Teknik Makina Designation: Face milling head (Planmesserkopf) Facts Head diameter: 80 mm Number of cutting edges: 6 Overall length: 52 mm Shank / arbor diameter: 27 mm Weight: 1.051 kg Special features For SDMT 1204 indexable inserts Compatible insert manufacturer: ZCC Torx screw: M4x10 Torx key size: T15 SKU: T360TM Brand: Teknik Makina FAQ Which indexable inserts fit this milling head? The face milling head accepts SDMT 1204 indexable inserts; compatibility with inserts from ZCC is stated for the T360TM. What is the head diameter and how many cutters are fitted? The head measures 80 mm in diameter and provides six cutting positions for indexable inserts. Which arbor or shank size is required for mounting? Mounting requires a 27 mm shank or adapter bore compatible with the T360TM holder. How are the inserts secured in the cutter head? Inserts are fastened using an M4x10 Torx screw tightened with a T15 key to ensure repeatable clamping. Is the T360TM suitable for automated tool magazines? Yes; the compact overall length (52 mm) and standard shank diameter make the T360TM appropriate for tool magazines when the machine’s tool interface matches the 27 mm holder specification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Cutter Head for SEET R245 12T3 Indexable Inserts 45° Cutting Angle, 6 Inserts, M3.5x8.5 Torx - Teknik Makina
Benefit from the combination of a robust 80 mm diameter cutting head with six cutting edges and a 27 mm shank for steady material removal and long tool life; order the tool directly via Metav Werkzeuge or consult the technical team for application advice. Planing cutter head T436TM – 80 mm diameter, 6-edge face milling head (Teknik Cutting Tools) Planing cutter head engineered for face milling with SEET 12T3 R245 indexable inserts, designed for reliable material removal in industrial machining and workshop environments 80 mm diameter for large contact area Six cutting edges for even wear distribution 45° cutting angle for axial engagement 27 mm shank for secure toolholder fit Consistent cutting performance for stable production The milling head delivers repeatable results thanks to its six cutting edges and a defined 45° cutting angle, which together ensure efficient chip formation and reduced vibration during face milling. The geometry supports smooth entry and exit, reducing the need for secondary finishing. Built for workshop and light industrial use, the component combines a compact overall length with a substantial diameter to balance rigidity and accessibility on a range of toolposts and adapters. Secure clamping and straightforward maintenance Designed with a 27 mm shank and secured by an M3.5×8.5 Torx screw (Torx key T15), the tool simplifies tool changes and maintains consistent clamping force for repeatable setups. The fastening concept reduces the risk of insert shift under load, supporting process reliability and minimising downtime. Routine maintenance is straightforward: replace the SEET R245 12T3 insert when wear appears to restore original cutting quality and cycle stability. Compatibility that keeps the workshop productive The head is matched to SEET R245 12T3 indexable inserts and is suitable for inserts from Sandvik, XTC and ZCC, providing flexibility when sourcing consumables. With an 80 mm diameter and six edges, the tool is intended for face and light shoulder milling where surface finish and machining speed are both priorities. Its construction and weight balance aim to reduce chatter and improve surface integrity, making it a practical choice for manufacturing and repair workshops seeking reliable throughput. For workshop-ready reliability, request the Teknik Cutting Tools Planing cutter head T436TM via Metav Werkzeuge; technical advice and ordering assistance are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: T436TM Manufacturer: Teknik Makina Brand: Teknik Cutting Tools For indexable inserts: SEET R245 12T3 Facts Diameter: 80 mm Shank / mounting diameter: 27 mm Overall length: 52 mm Weight: 1.305 kg Cutting edges: 6 Cutting angle: 45° Special features Torx screw: M3.5×8.5 Torx key: T15 Compatible insert manufacturers: Sandvik, XTC, ZCC Designed for SEET R245 12T3 indexable inserts FAQ Which inserts fit this cutter head? The head is designed for SEET R245 12T3 indexable inserts; inserts from Sandvik, XTC and ZCC are listed as compatible with this tool. What secures the insert in place? Insertion is secured with an M3.5×8.5 Torx screw, tightened with a T15 key to ensure repeatable clamping and stable cutting under load. Is the shank suitable for standard toolholders? The 27 mm mounting diameter is intended for stable clamping in compatible toolholders; the dimension supports firm seating and reduced vibration during face milling. What is the primary application for this head? The cutter head is intended for face milling and light shoulder work where the 45° cutting angle and multiple cutting edges improve surface finish and productivity. How many cutting edges are available before reindexing or replacement? The head carries six cutting edges; the life expectation depends on material and cutting parameters, with inserts replaced or reindexed when wear affects part quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Cutter Head for SNKX 1206 Indexable Inserts 45° Cutting Angle, 27mm Shank - Teknik Makina
Take advantage of a compact, robust cutter head that combines precise indexing for SNKX 1206 inserts with straightforward fastening and maintenance; the result is dependable throughput and reduced downtime. Order directly via Metav Werkzeuge or consult the team for application advice. Planing cutter head T325TM — 80 mm diameter, for SNKX 1206 indexable inserts (Teknik Cutting Tools) The Planing cutter head T325TM is a dedicated machining head for face and planing operations using SNKX 1206 indexable inserts, delivering repeatable surface quality across batch production. For SNKX 1206 indexable inserts 80 mm cutter diameter Torx fastening M4x12.5, key T15 7 cutting edges, 45° cutting angle Consistent surface quality and reliable throughput The machining head is engineered to provide a steady cutting geometry that supports reproducible results in serial production. With an outer cutter diameter of 80 mm and a maximum cutting diameter of 93 mm, this design keeps cutting forces predictable and helps maintain machine stability. The balanced construction and modest mass support reduced vibration during operation, which improves tool life and lowers scrap rates. These rational performance advantages translate directly into measurable productivity gains on repetitive tasks. Wide compatibility reduces tooling complexity Designed specifically for the SNKX 1206 family of inserts, the head accepts inserts from recognised manufacturers such as Böhlerit, Korloy and Palbit, enabling flexibility in insert selection and supply chains. This interoperability reduces the need for multiple specialised holders and simplifies stock management. For operations that switch between grades or coatings, compatibility with common insert families means quicker adaptation to different materials and cutting conditions without swapping the holder. Fast, secure clamping for reduced downtime Tool changes and clamping are simplified by the proven Torx system: a M4x12.5 fastening screw secured with a T15 key ensures repeatable torque and secure seating of inserts. The head features seven cutting positions and a 45° rake geometry that together deliver a compromise between cutting efficiency and finish quality. Routine maintenance is straightforward; the accessible fastening system and standard key size mean lower tool-change times and fewer specialised consumables. Supplied dimensions and the standardised shank diameter of 27 mm permit predictable integration into existing toolholders and adaptors. Contact Metav Werkzeuge for expert guidance on integrating the Teknik Cutting Tools T325TM into existing setups or to request detailed compatibility checks; Metav's Emmerich team will advise on delivery and configuration Technical data SKU: T325TM Designation: Planing cutter head For inserts: for SNKX 1206 indexable inserts Manufacturer: Teknik Makina Data Cutter diameter: 80 mm Max cutting diameter: 93 mm Number of cutting edges: 7 Overall length: 52 mm Shank diameter: 27 mm Weight: 1.334 kg Cutting angle: 45° Special features Torx screw M4x12.5 Torx key size T15 Compatible with Böhlerit, Korloy, Palbit inserts Suitable for face and planing operations SKU reference T325TM FAQ What inserts fit this cutter head? The T325TM accepts SNKX 1206 indexable inserts; compatible brands include Böhlerit, Korloy and Palbit. What is the cutter diameter and maximum cutting range? The cutter head has an 80 mm diameter with a maximum effective cutting diameter of 93 mm. How are the inserts secured? Inserts are clamped with an M4x12.5 Torx screw, tightened using a T15 Torx key for consistent seating and repeatable torque. Is the head suitable for high-volume production? Yes — the balanced design, standardised shank diameter and straightforward insert changes make the head suitable for serial machining and reduced changeover time. Which supplier provides this product? This item is supplied under the Teknik Cutting Tools range and listed as SKU T325TM; Metav Werkzeuge can advise on delivery and integration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Cutter Head For SNKX 1606 Indexable Inserts 45° Cutting Angle, 6 Inserts, 27mm Bore - Teknik Makina
Take advantage of a robust combination of precise geometry and easy maintenance: the facing cutter head delivers consistent surface quality thanks to its 80 mm diameter and six cutting edges, while the standard 27 mm bore and Torx fastening ensure rapid insert changes and high production uptime. Order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Facing cutter head by Teknik Makina — 80 mm diameter, 6‑edge design for SNKX 1606 / ONHX 0606 inserts Facing cutter head designed for heavy‑duty facing and modular toolholder systems, compatible with SNKX 1606 and ONHX 0606 indexable inserts 80 mm diameter cutter head Fits SNKX 1606 and ONHX 0606 inserts 27 mm clamp bore for standard toolholders Six cutting edges with 45° cutting angle Stable surface finish through optimised geometry The toolbody provides a stable cutting platform by combining an 80 mm diameter with six cutting edges, which reduces load per insert and promotes an even material removal rate. The 45° cutting angle softens axial engagement and helps achieve a uniform finish while keeping cutting forces predictable. These characteristics result in repeatable performance on serial facing operations and fewer rejected parts due to surface irregularities. Fast insert changes and secure clamping to maximise uptime A standard 27 mm clamp bore allows straightforward integration into common toolholders, while the M5x12 Torx fastening and supplied T20 key enable secure and fast insert replacement. The compact overall length of 50 mm and weight of 2.013 kg contribute to a low moment of inertia and stable running, which means shorter machine set‑up times and less production downtime for routine maintenance. Broad compatibility for modular machining cells Compatibility with SNKX 1606 and ONHX 0606 indexable insert formats — including Palbit alternatives — offers flexibility when specifying cutting grades or geometries for different job requirements. The modular nature of the cutter head supports quick reconfiguration of machining centres and reduces the need for multiple dedicated toolbodies, delivering cost efficiency in multi‑product environments without compromising cut quality. Discuss specific applications or request a quotation from Metav Werkzeuge — contact our Emmerich office by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to evaluate suitability for the intended machining task Technical data SKU: T630TM Manufacturer: Teknik Makina Article name: Facing cutter head for SNKX 1606 and ONHX 0606 indexable inserts Facts Diameter: 80 mm Cutting edges: 6 Cutting angle: 45° Shank bore: 27 mm Overall length: 50 mm Weight: 2.013 kg Special features Compatible inserts: SNKX 1606, ONHX 0606 Compatible insert manufacturer: Palbit Fastening screw: M5x12 (Torx) Torx key size: T20 FAQ Which inserts are compatible with this cutter head? The facing cutter head accepts SNKX 1606 and ONHX 0606 indexable inserts; Palbit grades are commonly used as compatible alternatives. What effect does the 45° cutting angle have on machining? A 45° cutting angle reduces axial force and distributes load across the six cutting edges, improving surface finish and cutting stability for facing operations. What mounting interface is required for the toolbody? The toolbody requires a toolholder with a 27 mm clamp bore to mount securely and ensure correct concentricity. How are the inserts secured in place? Inserts are retained with an M5x12 Torx screw tightened with a T20 key, allowing controlled clamping torque and quick replacement. What are the physical dimensions and mass of the cutter head? The cutter head has an 80 mm diameter, 50 mm overall length and a mass of 2.013 kg, offering a compact yet stable solution for facing tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Cutter Head for WNMX 09T3 Indexable Inserts 6 Cuts, 27mm Shank Diameter - Teknik Makina
Take advantage of the combination of robust cutting capacity and secure clamping for uninterrupted production: the 80 mm diameter and six cutting edges deliver efficient material removal while the 27 mm shank ensures stable mounting; order the component via Metav Werkzeuge or consult our specialists for technical matching. Face milling head for WNMX 09T3 indexable inserts — 80 mm diameter, 6 edges (Teknik Makina) The Face milling head is a compact cutter head engineered for face milling with WNMX 09T3 indexable inserts, compatible with Korloy inserts and intended for industrial milling applications. 80 mm diameter for broad cutting width Six cutting edges for steady material removal 27 mm shank for secure toolholder clamping Compatible with Korloy WNMX 09T3 inserts High material removal with consistent surface quality The geometry of the tool, featuring an 80 mm diameter and six cutting edges, is designed to increase throughput on repetitive face-milling tasks while maintaining a reliable surface finish. The multi-edge configuration spreads cutting forces across several inserts, which reduces individual insert load and supports stable chip formation. For production environments requiring repeatable passes, this design provides measurable gains in cycle time without sacrificing process stability. Secure mounting and straightforward maintenance A 27 mm shank and standardised fastening details allow confident clamping in common toolholders and contribute to tool rigidity. The head uses M3x7 screws tightened with a T8 Torx key, enabling quick insert changes and routine maintenance with workshop tools. Compatible with Korloy WNMX 09T3 indexable inserts, the system permits fast replacement of cutting edges to keep machine uptime high and maintenance intervals short. Compact design that reduces overhang and vibration With an overall length of 50 mm and a balanced mass of 1.077 kg, the component has been dimensioned to limit overhang and improve dynamic stability at the cutting zone. Reduced projection from the spindle helps to lower the risk of chatter in medium-duty face milling operations, thereby extending effective insert life and improving dimensional consistency across batches. Practical integration into production workflows The head’s interface and proven insert compatibility simplify tool management in mixed-machine workshops. Supplied for indexable insert use, the unit suits setups where fast indexability and minimal downtime are priorities. Technical documentation and compatibility details are available through Metav Werkzeuge to support purchasing decisions and ensure correct selection for specific machining tasks. For secure, high-performance milling with the Teknik Makina face milling head, contact Metav Werkzeuge for specification checks and supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T671-1TM Manufacturer: Teknik Makina SKU: T671-1TM Facts Diameter: 80 mm Overall length: 50 mm Shank diameter: 27 mm Weight: 1.077 kg Number of cutting edges: 6 Screw: M3x7 Torx key: T8 Special features For WNMX 09T3 indexable inserts Compatible with Korloy inserts Indexable insert face milling head Compact 50 mm overall length FAQ What insert type is required for this head? The head is designed for WNMX 09T3 indexable inserts and is compatible with Korloy WNMX 09T3 inserts for straightforward procurement and tool management. Which fastening tools are needed for insert changes? Insert clamping uses M3x7 screws requiring a T8 Torx key; standard workshop Torx tools are suitable for maintenance. How does the 27 mm shank benefit machining? A 27 mm shank provides a secure interface with common toolholders, improving rigidity and reducing vibration during face milling. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Cutter Head SNMX 1206 Indexable Insert, 7 Cutting Edges, 88° Rake Angle, 27mm Shank - Teknik Makina
Take advantage of a compact, production‑oriented solution that combines a broad 80 mm cutting diameter with seven cutting edges for consistent face removal; secure clamping via an M4x12.5 Torx screw (T15) reduces changeover time and keeps cycle times predictable — order via Metav Werkzeuge or consult our advisors for integration support. Face Milling Head T345TM by Teknik Makina — Ø 80 mm, 7 cutting edges A Face Milling Head T345TM engineered for efficient face milling using 1206‑size indexable inserts in workshop and production environments Compatible with SNMX 1206 indexable inserts Ø 80 mm cutter head for wide face milling Seven cutting edges for uniform material removal 27 mm mounting diameter for stable arbor fit M4x12.5 Torx clamp screw, T15 key required Faster, more consistent face milling with predictable results The milling head is configured to deliver steady material removal across broad surfaces: the Ø 80 mm diameter and seven cutting edges distribute cutting forces evenly, which reduces vibration and helps maintain surface quality. The specified cutting angle 88° is optimised for face operations, allowing high stock removal rates while preserving insert life. This combination supports shorter cycle times and a more reliable production flow, translating into measurable efficiency gains in repetitive machining tasks. Secure clamping and rapid insert handling to cut downtime Clamping is executed with a M4x12.5 Torx screw tightened with a T15 key and a 27 mm mounting diameter ensures a rigid fit on the arbor. The robust clamping arrangement enables quick insert changes and repeatable seating, so tool changes are completed with minimal disruption. As a result, maintenance intervals are straightforward to plan and machine uptime is increased, which supports tighter production scheduling and reduced unplanned stops. Built for integration in production toolsets Compatibility with 1206‑sized indexable inserts and documented fit to common manufacturers streamlines tool inventory: the head accepts inserts of the 1206 family and is matched to mainstream supplier forms. The design is intended for straightforward adoption in existing setups, allowing the milling head to be mounted on standard spindles and arbors without bespoke adaptors. This reduces procurement complexity and helps centralise stocking of cutting components across the workshop. Clear application fit and dependable specification The cutter is specified for face milling applications where broad contact and consistent finishes are required. The tool body’s dimensions — Ø 80 mm, overall length 50 mm and a compact weight of about 1.213 kg — support stable handling and straightforward mounting. The combination of indexed inserts and a repeatable clamping system yields a cost‑effective solution for series machining and maintenance workshops, while Korloy‑compatible insert options widen sourcing choices. Contact Metav Werkzeuge today to discuss how the Teknik Cutting Tools Face Milling Head T345TM with 1206 insert compatibility can be integrated into an existing toolset or production line; our consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: T345TM Product: Face milling head For: for SNMX 1206 Indexable Inserts Manufacturer: Teknik Makina Facts Diameter: 80 mm Mounting diameter: 27 mm Cutting edges: 7 Overall length: 50 mm Cutting angle: 88° Weight: 1.213 kg Clamp screw: M4x12.5 Torx key: T15 Special features Compatible with Korloy 1206 inserts Designed for indexable insert face milling Robust Torx clamp for repeatable seating Compact, production‑ready format FAQ Which insert size fits this milling head? The milling head is specified for 1206‑size indexable inserts; Teknik Makina’s T345TM accepts standard 1206 forms for face milling. Which clamp screw and key are required for insert changes? Insert clamping uses an M4x12.5 Torx screw; a T15 Torx key is required to secure and release the inserts on the T345TM. What is the mounting diameter for the arbor fit? The tool is designed with a 27 mm mounting diameter to ensure stable seating on compatible arbors and reduce runout during face milling. How many cutting edges does the head provide and what is the benefit? The head features seven cutting edges, which distribute load for smoother material removal and improved surface finish during face operations. Is the cutter compatible with Korloy inserts? Yes, the T345TM is compatible with Korloy 1206‑format indexable inserts, facilitating sourcing from a leading insert manufacturer. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Grooving Head for SNKX 1206 and ONHX 0505 Indexable Inserts, 45° Cutting Angle, M4x10 Torx - Teknik Makina
Optimise milling productivity with a robust face milling head that pairs an Ø 80 mm diameter and a 45° cutting angle with compatibility for SNKX 1206 and ONHX 0505 indexable inserts — order directly via Metav Werkzeuge or consult their technical team for integration advice. Face milling head (Planmesserkopf) by Teknik Makina — Ø80 mm, 45° cutting angle The Face milling head (Planmesserkopf) is designed as a compact cutter body for medium-duty roughing and finishing operations using SNKX 1206 and ONHX 0505 indexable inserts, suitable for a wide range of metal-cutting applications where stable chip control and repeatable geometry are required Ø 80 mm cutter diameter 7 cutting edges for even material removal Compatible with SNKX 1206 and ONHX 0505 inserts M4x10 Torx screw, T15 drive High material-removal rate with controlled cutting geometry The cutter body delivers an efficient machining balance by combining a 45° cutting angle with a moderate diameter, enabling higher feed rates with conservative depth-of-cut settings. This geometry reduces cutting forces on the spindle while promoting consistent chip formation; the result is improved tool life of the insert and a reduction in vibration-related surface defects. The combination of angle and cutter size is particularly effective in operations that demand both rapid stock removal and acceptable surface finish in serial production environments. Secure mounting and machine compatibility for reliable cycles Designed with a 27 mm shank, the head offers a compact and rigid interface for many standard toolholders. The solid construction and defined mounting dimensions ensure a secure fit, minimising runout and therefore preserving the insert edge life. The retention system uses an M4x10 Torx screw with a T15 drive, supplying a repeatable clamping torque for each index change. Clear mechanical interfaces reduce set-up time and make the tool suitable for repetitive production runs where reproducibility is essential. Flexible insert options to match workpiece requirements The cutter is specified for SNKX 1206 indexable inserts and is also compatible with ONHX 0505 Palbit-style alternatives, enabling selection between grades and geometries to suit material and process: from general-purpose steels to more demanding alloyed materials. Using standardised insert types simplifies inventory management and allows the machining strategy to be adjusted quickly — for instance, switching to a tougher grade when machining interrupted cuts or to a finer grade for improved surface finish. Robust design for consistent tool performance With seven cutting edges distributed on the periphery and an overall length of 50 mm, the tool body is engineered to deliver homogeneous material engagement and even wear distribution across the insert set. The Ø 80 mm diameter ensures adequate cutting circumference for productivity while keeping the assembly compact. The mass of 1.051 kg contributes to damping during cutting, helping to stabilise the cutting process in medium-duty applications and supporting repeatable tolerances across series components. For reliable supply and expert compatibility advice on the Teknik Makina face milling head (SKU T625TM), contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss tooling configurations and lead times Technical Data Article number: T625TM Designation: Face milling head (Planmesserkopf) Manufacturer: Teknik Makina Compatible inserts: SNKX 1206, ONHX 0505 ECLASS: 21181015 Key Dimensions Diameter: 80 mm Shank diameter (D): 27 mm Overall length: 50 mm Number of cutting edges: 7 Cutting angle: 45° Weight: 1.051 kg Materials & Features Compatible insert make: Palbit Torx screw: M4x10 Torx key drive: T15 Alternative inserts: ONHX 0505 Palbit FAQ What insert types fit this face milling head? The face milling head accepts SNKX 1206 indexable inserts and is compatible with ONHX 0505 Palbit-style alternatives for flexible application choices. Which shank diameter is required for mounting? A toolholder with a 27 mm shank interface is required for secure mounting of the Teknik Makina face milling head (SKU T625TM). How many cutting edges are provided and what is their benefit? The cutter body uses seven cutting edges, which promote even wear distribution and consistent material removal for improved cycle stability. Is a specific screw or driver needed for insert clamping? Insert clamping uses an M4x10 Torx screw with a T15 drive to ensure repeatable clamping torque and secure retention. What are the typical applications for this cutter? The head is intended for medium-duty roughing and finishing on steels and similar alloys where a balance of stock removal and surface quality is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Grooving Head For SNMU 1305 Indexable Inserts 45° Cutting Angle, M5x12 Torx Screw - Teknik Makina
Benefit from a compact, precisely dimensioned cutter head that combines an 80 mm diameter, a 45° cutting angle and compatibility with SNMU 1305 indexable inserts for smoother faces and reduced tool change frequency; order or request advice via Metav Werkzeuge for reliable supply and application guidance. Face milling head T236TM by Teknik Makina — 80 mm diameter, for SNMU 1305 indexable inserts A face milling head T236TM engineered for efficient face milling operations with SNMU 1305 indexable inserts, delivering stable cutting geometry and straightforward mounting for production and jobbing environments. 80 mm nominal diameter Compatible with SNMU 1305 inserts (ISCAR) Seven cutting edges for long tool life 45° cutting angle for smooth cutting Torx M5x12 screws, T20 key Stable cutting performance with fewer interruptions The cutter head is built to deliver consistent results in face milling: the 45° cutting angle reduces radial cutting forces and supports a finer surface finish, while the arrangement of seven cutting edges extends effective service between index changes. This combination improves cycle-time efficiency and helps maintain dimensional accuracy across batches. The tool geometry is especially suitable where predictable chip flow and steady cutting forces are required to keep milling operations productive and repeatable. Secure mounting and straightforward maintenance Clamping is handled via M5x12 Torx screws that require a T20 key, offering a secure, repeatable fixation of each insert pocket and reducing the risk of loosening under vibration. The head’s 27 mm bore ensures precise seating on compatible toolholders, enabling reliable concentricity and quick setup. Robust fastenings and accessible screwheads translate into shorter maintenance intervals and less downtime for insert changes and inspections. Compact dimensions for versatile machine integration With an 80 mm diameter and an overall height of 52 mm, this head is compact enough for versatile integration yet substantial enough to provide mass for vibration damping; the recorded mass of 1.147 kg indicates a solid build that assists in absorption of cutting dynamics. The compact footprint aids in achieving required clearances on multi-axis machines and reduces collision risk while preserving the cutter’s structural stability during medium-duty face milling. Proven compatibility and supply confidence The design accepts SNMU 1305 format inserts and is specified for compatibility with ISCAR grades, enabling selection from a wide range of insert geometries and grades for varied machining tasks. Supplied under the Teknik Makina designation and identified as SKU T236TM, the head suits shops seeking standardised insert systems that simplify tooling inventories. Metav Werkzeuge’s European stock and quality filter provide dependable access to these components and support consistent supply for production planning. Contact Metav Werkzeuge for availability and application advice on Teknik Makina face milling heads with SNMU 1305 compatibility — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored guidance and procurement support Technical data Article number: T236TM Manufacturer: Teknik Makina ECLASS: 21180902 Core dimensions Diameter: 80 mm Overall height: 52 mm Bore / mounting diameter: 27 mm Cutting angle: 45° Cutting edges: 7 Weight: 1.147 kg Features & mounting For SNMU 1305 indexable inserts Compatible insert brand: ISCAR Torx screw: M5x12 Torx key size: T20 Solid, compact construction FAQ Is this head compatible with standard SNMU 1305 inserts? Yes. The head accepts SNMU 1305 indexable inserts and is specified for compatibility with ISCAR insert grades for interchangeability and easy sourcing. What fastening hardware is required for insert clamping? Insert clamping uses M5x12 Torx screws; a T20 Torx key is required for tightening and removal of the screws. What are the key dimensions to check before fitting to a toolholder? Check the 80 mm diameter, 27 mm bore for the mounting interface and the overall height of 52 mm to ensure machine clearance and correct seating. How does the 45° cutting angle affect machining results? A 45° cutting angle reduces radial load on the tool, promoting smoother surface finishes and more even chip formation, which supports steadier machining and longer insert life. Which SKU should be ordered for this Teknik Makina head? Order SKU T236TM for the Teknik Makina face milling head designed for SNMU 1305 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Face Mill Cutter for RCKT 1204 Indexable Inserts With Internal Coolant, 45° Cutting Angle - Teknik Makina
Take advantage of an 80 mm cutting diameter combined with internal coolant and six cutting edges for reliable chip control and sustained machining performance; order the cutter directly via Metav Werkzeuge or consult our advisors for sizing and application support. Round Insert Milling Cutter T464-1TM — 80 mm, internal coolant, for RCKT 1204 indexable inserts (Teknik Makina) The Round Insert Milling Cutter T464-1TM is a robust machining head designed for industrial face milling and high-stability material removal using RCKT 1204 indexable inserts 80 mm diameter for broader cutting width Internal coolant for improved chip evacuation Six cutting edges for stable material removal Compatible with Sandvik RCKT 1204 inserts Greater throughput thanks to broad cutting geometry The cutter’s 80 mm diameter and six cutting edges produce a wider effective cutting width, which supports a higher material removal rate while maintaining surface quality. The 45° cutting arrangement reduces axial forces, which leads to smoother engagement and less vibration during heavy passes. These geometric characteristics are designed to improve cycle-time efficiency in series production and to provide predictable results for repetitive operations. Reduced downtime through controlled cooling and secure clamping Equipped with internal coolant, the tool channels cutting fluid directly to the insert pockets, which improves chip evacuation and cooling where it is needed most. This targeted supply helps to extend tool life and reduce thermal wear on the inserts. The inserts are secured by a Torx system (Torx key: T15) and Torx screw M3.5x8.5, ensuring a firm seat and quick replacement during maintenance intervals. The cutter’s overall length of 50 mm and mass of 1.088 kg balance rigidity with manageable handling for set-up tasks. Compatibility and practical application features for workshop use Designed for use with RCKT 1204 indexable inserts from Sandvik, the cutter is a practical choice where reliable insert availability and proven insert geometries are required. The T464-1TM is suited to industrial milling operations that demand consistent chip control and repeatable set-up, particularly in face-milling or planing applications. Installation is straightforward and the modular nature of the insert system simplifies inventory management and replacement procedures. Contact Metav Werkzeuge in Emmerich for application advice and to secure the Teknik Makina T464-1TM; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: T464-1TM Manufacturer: Teknik Makina ECLASS: 21180902 Facts Diameter: 80 mm Overall length: 50 mm Weight: 1.088 kg Cutting edges: 6 Cutting angle: 45° Special features Internal coolant For RCKT 1204 indexable inserts Compatible insert manufacturer: Sandvik Torx key: T15 Torx screw: M3.5x8.5 FAQ What inserts fit this cutter? The cutter accepts RCKT 1204 indexable inserts; compatibility with inserts from Sandvik is specified for the T464-1TM. How does internal coolant benefit machining? Internal coolant in the T464-1TM delivers fluid directly to the cutting zone, improving chip removal and helping to prolong insert life under continuous operation. How many cutting edges are active on the tool? The milling head is equipped with six cutting edges, which distributes cutting forces and supports stable material removal. Which fastening system is used for the inserts? Inserts are fastened with Torx screws (M3.5x8.5) using a Torx T15 key for positive clamping and simple replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com