Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
77mm Face Cutter Head 45° For SDHT 1204 Indexable Inserts, M4.5x11 Torx T15 - Teknik Makina
Take advantage of the 45° cutting angle and secure 22 mm mounting to combine precise surface finish with dependable tool retention; the head’s compatibility with SDHT 1204 indexable inserts and a compact overall length keep changeover times low and production steady. Order the planing cutter head directly via Metav Werkzeuge or ask the consultants for application advice. Planing Cutter Head T300TM – 45° for SDHT 1204 Indexable Inserts by Teknik Makina A Planing Cutter Head engineered for accurate face milling and finishing operations, designed to accept SDHT 1204 indexable inserts for consistent results in industrial workshop and production environments. 45° cutting angle for refined surface finish Compatible with SDHT 1204 indexable inserts 22 mm shank for secure mounting Lightweight 0.63 kg for easier handling Delivering consistent surface quality with a 45° geometry The 45° cutting angle reduces cutting forces and spreads chip formation over a longer engagement, producing a smoother surface and lowering the risk of chatter. Fitted with SDHT 1204 indexable inserts, this cutter head converts insert grades and chipbreakers into application-specific solutions, enabling controlled material removal in both finishing and light semi‑roughing tasks. The result is improved part quality and fewer rework cycles, which supports tighter production tolerances. Fast, secure clamping and straightforward insert changes A 22 mm shank diameter provides a rigid connection to standard toolholders while the supplied M4.5x11 Torx screw (Torx key size T15) ensures repeatable and secure insert clamping. The arrangement shortens maintenance time: worn inserts are exchanged quickly and the retention system is easy to access and inspect. The head’s compact overall length (45 mm) and modest weight (0.63 kg) reduce overhang and dynamic loads, improving balance and spindle life in high‑use applications. Practical fit for production workshops and flexible machining tasks With a working diameter of 63 mm and a maximum cutting diameter of 77 mm, the cutter head offers a practical size range for many milling centres and multi‑spindle machines. The configuration with five cutting edges provides predictable cutting cycles and simple optimisation of feed and speed when paired with appropriate insert grades. Supplied by a reliable distributor, the tool is intended for users seeking dependable repeatability and efficient tool change routines in industrial settings. Contact Metav Werkzeuge for tailored selection advice and prompt supply from Emmerich – call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm suitability and lead times Technical Data Article number: T300TM Description: Planing cutter head for SDHT 1204 indexable inserts Manufacturer: Teknik Makina Core data Shank diameter: 22 mm Cutting angle: 45° Diameter: 63 mm Max cutting diameter: 77 mm Number of cutting edges: 5 Total length: 45 mm Weight: 0.63 kg Torx screw: M4,5x11 Torx key: T15 Special features Compatible with SDHT 1204 indexable inserts Compact length for reduced overhang Secure Torx clamping system FAQ Which indexable inserts fit this cutter head? The planing cutter head is designed for SDHT 1204 indexable inserts; Teknik Makina specifies this geometry for optimal seating and chip control. What is the maximum cutting diameter achievable? The maximum cutting diameter is 77 mm, while the nominal diameter is 63 mm, allowing flexibility for different finishing widths. How is the insert secured and what tool is required? Inserts are fastened with an M4.5x11 Torx screw and require a T15 Torx key for tightening and removal. Is this head suitable for finishing work? Yes, the 45° geometry is optimised for refined surface finish and controlled chip formation, making it suitable for finishing and light semi‑roughing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm 90° Corner Cutting Head For TPKN 1603-2204 Indexable Inserts, 5 Cutting Edges, 52mm Overall Length - Teknik Makina
Benefit from the combination of precise 90° cutting geometry and secure M6x17 clamping for repeatable turning results; available through Metav Werkzeuge with fast supply from stock in Emmerich or consult the team for configuration advice. Right-angle turning head (90°) for TPKN 1603-2204 indexable inserts by Teknik Makina The Right-angle turning head is a compact 90° tool holder designed for external turning using TPKN 1603 indexable inserts, suited to workshops and CNC turning centres where consistent edge engagement and simple set-up are required. 90° cutting geometry for precise grooving Compatible with TPKN 1603–2204 inserts Robust M6x17 clamping for stable operation Compact 32 mm shank, Ø80 mm head Deliverable accuracy from the geometry and compatibility The 90° configuration delivers a defined approach angle that simplifies programming and reduces the need for complex compensation. Fitted for TPKN 1603 indexable inserts, this head provides reliable seating of the cutting edge and consistent chip flow, which together reduce rework and improve first-pass yield. The clear specification of a 32 mm shank and Ø80 mm head streamlines selection for tooling systems and ensures mechanical compatibility with common tool turrets, supporting a predictable process window on production lathes. Quick set-up and secure clamping for continuous production Designed with serviceability in mind, the head uses a M6x17 clamping screw and an M3 hex screw for insert retention; an included 4 mm Allen key size ensures standardised torque application. The compact dimensions — overall length 52 mm and a mass of 0.961 kg — combine to lower centrifugal loads and improve balance at higher spindle speeds. These engineering choices translate into fewer stoppages for insert changes and a robust connection under cutting forces, promoting steady cycle times and reduced toolholder-related vibration. Practical workshop advantage and supplier reliability For workshops seeking to standardise tooling, the head supports up to five cutting edges arrangement and accepts the common TPKN insert family, reducing the number of different holders required at the bench. Sourcing through Metav Werkzeuge gives access to a broad catalogue and regional stock, backed by decades of precision experience and a distribution hub in Emmerich that acts as a quality filter for European customers. This supplier proximity shortens lead times and helps maintain production continuity when routine reorders or replacements are needed. For selection assistance on the Teknik Makina right-angle turning head and to confirm fitment with existing tool turrets, contact Metav Werkzeuge in Emmerich for precise advice and expedited supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T100TM Manufacturer: Teknik Makina Compatible inserts: TPKN 1603–2204 Dimensions & figures Shank diameter: 32 mm Head diameter: 80 mm Overall length: 52 mm Weight: 0.961 kg Cutting edges: 5 Cutting angle: 90° Fastening & accessories Clamping screw: M6x17 Hex screw: M3 Allen key: 4 mm Clamp plate: TA010 FAQ What inserts fit this turning head? The right-angle turning head is designed for TPKN 1603–2204 indexable inserts; these insert sizes seat correctly in the holder and maintain the specified cutting geometry. Is the holder suitable for high-speed turning? With a compact 32 mm shank and a balanced Ø80 mm head, the holder is engineered to provide stable performance at elevated spindle speeds when assembled and tightened to the recommended torques. Which screws and tools are required for insert changes? Insert retention uses a M6x17 clamping screw and an M3 hex screw; the compatible Allen key size is 4 mm, allowing fast and standardised insert replacements. How does the 90° angle benefit production processes? A defined 90° cutting angle simplifies toolpath planning and reduces geometric compensation, which supports repeatable part quality and can shorten cycle times on turning operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm 90° Indexable Turning Head for TPKN 1603-2204 Indexable Inserts, 5 Cutting Edges M6x17 – Teknik Makina
Benefit from a rigid 90° cutting geometry, secure clamping via the M6x17 screw and the robustness of a 32 mm shank for stable machining; order the holder directly via Metav Werkzeuge or consult the team for application support. Corner turning head T122TM by Teknik Makina — 90° cutting angle, for TPKN 1603–2204 indexable inserts The Corner turning head T122TM is a compact, high-stability tool head for external corner turning and profiling with TPKN 1603 indexable inserts 90° cutting angle for precise corner turning 32 mm shank for sturdy toolholder mounting Compatible with TPKN 1603–2204 indexable inserts M6x17 clamping screw with 4 mm Allen key included Improved machining stability for consistent corner turning The design delivers a 90° cutting angle that is optimised for precise corner machining and repeatable profile work. By combining a rigid geometry with a solid clamping mechanism, the tool head reduces vibration and produces a stable cutting environment. The compatibility with TPKN 1603–2204 indexable inserts allows rapid insert changes and predictable cutting behaviour, which helps maintain cycle-time consistency and lowers setup overhead in batch production. Robust mounting and simple assembly minimise downtime A 32 mm shank provides a large contact area in the toolholder, improving rigidity and reducing deflection under cutting loads. The assembly is secured using the supplied M6x17 screw and a 4 mm Allen key, enabling quick and secure mounting without additional adapters. The unit’s mass (approx. 0.954 kg) contributes to inertial damping on heavy cuts, while the compact 52 mm overall length and 80 mm diameter balance accessibility and strength for confined machining zones. Practical operation and maintainability for workshop use The head features five cutting edges, allowing multiple indexings before insert replacement and supporting cost-efficient tool use. The straightforward mechanical interface with standard TPKN inserts keeps tool management predictable and reduces the need for special tooling. Technical teams benefit from short changeover times and limited spare-part variety when the same insert family is used across operations. Suitable application scope and procurement confidence Engineered for shops that require reliable corner-turning performance, the tool head is suitable for short-run and medium-run turning tasks when paired with appropriate inserts. Buyers gain procurement confidence through Metav’s distribution, backed by a large product range and a quality-filtered supply chain from Emmerich. The combination of compatibility, rigid construction and standard clamping hardware supports efficient integration into existing turning setups. Choose the Teknik Makina T122TM for stable 90° corner turning and contact Metav Werkzeuge for tailored technical advice and delivery from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: T122TM Manufacturer: Teknik Makina Article designation: Corner turning head for TPKN 1603–2204 indexable inserts Clamping screw: M6x17 Core dimensions Diameter: 80 mm Overall length: 52 mm Shank diameter: 32 mm Weight: 0.954 kg Cutting angle: 90° Cutting edges: 5 Features Compatible with TPKN 1603–2204 indexable inserts Supplied clamping screw and Allen key (4 mm) Compact design for external corner turning SKU T122TM by Teknik Makina FAQ Which inserts fit this turning head? The T122TM is designed for TPKN 1603–2204 indexable inserts, ensuring secure seating and correct cutting geometry. What are the key mounting dimensions? The head has a 32 mm shank, an overall length of 52 mm and a head diameter of 80 mm. Is the clamping hardware included? The delivery includes the M6x17 clamping screw and a 4 mm Allen key for assembly. What is the cutting angle and how does it affect machining? A 90° cutting angle provides precise corner turning geometry, improving dimensional control and reducing the need for secondary finishing. What is the product SKU and brand? This item is T122TM from Teknik Makina, a corner turning head for TPKN 1603–2204 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Cutter Head for APMT 1604 Indexable Inserts L52mm, 90° Cutting Angle - Teknik Makina
Take advantage of the 80 mm diameter and 90° cutting angle for precise shoulder milling, combined with compatibility for APMT 1604 indexable inserts to streamline tool changes and maintain production stability; order via Metav Werkzeuge or contact the consultants for tailored advice. Corner milling head T246TM — 80 mm diameter, for APMT 1604 indexable inserts (Teknik Makina) A robust corner milling head engineered for accurate shoulder and face milling on medium-duty turning and milling centres, compatible with APMT 1604 indexable inserts for reliable insert seating and replacement 80 mm diameter for stable cutting Compatible with APMT 1604 inserts (Korloy) Compact 52 mm overall length 90° cutting angle for square shoulders Consistent, measurable cutting performance for shoulder operations The 80 mm diameter and 90° cutting angle deliver a reproducible geometry ideal for square-shoulder milling and profile work. Using APMT 1604 indexable inserts ensures that cutting edges are economical to replace and that dimensional consistency is maintained across serial production. The tool's geometry is configured to provide stable chip evacuation and reduced chatter, which translates into predictable cycle times and less rework on finished parts. This level of repeatability supports process planning and machine utilisation, essential for production environments focused on throughput and quality. Secure clamping and compact design reduce downtime A compact 52 mm overall length and a robust fastening system using T15 Torx with M4x10 screws minimise overhang while providing secure insert retention. The head is balanced for reduced vibration; combined with seven indexed cutting positions, it allows multiple edge changes before full replacement, extending service intervals. These attributes reduce tool change frequency and machine downtime, enhancing operational efficiency. Clear mechanical interfaces make maintenance straightforward for workshop personnel, shortening non-productive time between batches. Compatibility, supply reliability and practical support from Metav Designed for use with Korloy-manufactured APMT 1604 inserts, the head fits established insert portfolios, simplifying procurement and stocking strategies. As part of a reliable supply chain, the product is backed by Metav’s distribution and quality-control approach, offering transparent logistics from Emmerich. If additional technical specifications or guidance on integration into existing toolholders are required, the Metav team can supply datasheets and application advice to support correct implementation and maximise tool life. This practical support complements the head’s technical benefits and helps maintain consistent production quality. For reliable high‑precision shoulder milling with Teknik Makina’s corner milling head T246TM, contact Metav Werkzeuge in Emmerich for personalised advice and prompt supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: T246TM Product: Corner milling head for APMT 1604 indexable inserts Manufacturer: Teknik Makina Diameter: 80 mm Overall length: 52 mm Weight: 1.118 kg Cutting angle: 90° Cutting edges: 7 Torx key: T15 Torx screw: M4x10 ECLASS: 21181015 Compatible with Korloy APMT 1604 inserts Indexable insert system Compact shank design Balanced for reduced vibration FAQ Which inserts fit this milling head? The corner milling head accepts APMT 1604 indexable inserts; Korloy variants are specified for direct compatibility. Can the head be used for shoulder milling and face machining? Yes, the 90° cutting angle and robust design make the head suitable for both shoulder and light face milling operations. How many cutting edges are available before replacement? The head provides seven indexed cutting positions, allowing multiple edge changes to extend the head’s operational life. What fastening hardware is required for insert mounting? Fastening uses T15 Torx keys and M4x10 screws for secure insert clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Cutting Head For SNHU 1206 Indexable Inserts, M4x10 Torx T15 - Teknik Makina
The reliable combination of robust build, quick insert changes and a secure Ø 27 mm shank ensures consistent turning performance; order the corner tool head directly via Metav Werkzeuge or consult our specialists for integration advice. Corner tool head T618-1TM — compact indexable head, Ø 80 mm, 6 cutting edges (Teknik Cutting Tools) The Corner tool head T618-1TM is a compact indexable insert holder engineered for turning applications using SNHU 1206 indexable inserts, delivering stable cutting and straightforward maintenance Robust 80 mm diameter head for stable cutting Compatible with SNHU 1206 indexable inserts Shank Ø 27 mm for secure toolholder fit Torx mounting M4x10 with T15 key Consistent cutting performance from a compact head The design focuses on delivering a stable cutting platform: the Ø 80 mm head diameter and six cutting edges reduce vibration and contribute to predictable tool life, translating into fewer unscheduled tool changes. The holder accepts SNHU 1206 indexable inserts, a common insert format that simplifies stock management and reduces procurement complexity. By combining a compact footprint with robust geometry, the tool head helps maintain surface finish and dimensional stability in repetitive turning tasks, offering clear productivity gains on batch work. Secure fixation and fast insert handling for reduced downtime Mounting and insert retention are engineered for reliability and speed. The unit features a shank Ø 27 mm for positive seating in standard toolholders and is secured with a M4x10 Torx screw using a T15 key, providing a predictable clamping force and easy servicing. The overall length of 50 mm and balanced weight of 0.968 kg ensure manageable handling during setup while limiting overhang to reduce runout. Technically, the Torx fixing permits consistent torque application during replacement, which improves repeatability and reduces the risk of insert movement under load. Real benefits for workshop throughput and cost control Using an indexable head that accepts widely available inserts lowers tooling costs by enabling multi-edge utilisation and quick indexing instead of full insert replacement. The modular nature of the head supports rapid changeovers and consistent cycle times, which is particularly beneficial for small-batch production and repair shops that must balance flexibility with throughput. Clear, measurable advantages include reduced setup time per tool change and fewer scrap parts due to the improved stability offered by the head geometry. Versatility, compatibility and practical advice The head is intended specifically for use with SNHU 1206 indexable inserts and fits toolholders with a 27 mm mounting diameter, making it straightforward to integrate into existing turning setups. While the unit is optimised for external turning tasks, its compact design also supports operations where space is limited. If uncertainty remains about fitment or intended application, technical details and integration support are available from Metav Werkzeuge to ensure the head meets the workshop’s operational requirements. Contact Metav Werkzeuge today to discuss how the Teknik Cutting Tools corner tool head T618-1TM can be integrated into current tooling systems and to confirm delivery and availability from our Emmerich warehouse Technical data Article number: T618-1TM Manufacturer: Teknik Makina Facts Diameter: 80 mm Cutting edges: 6 Overall length: 50 mm Shank diameter: 27 mm Weight: 0.968 kg Special features For SNHU 1206 indexable inserts Torx screw: M4x10 Torx key: T15 Compact indexable insert head FAQ Can the head be used with other insert types? The head is specified for SNHU 1206 indexable inserts; using different insert geometries is not recommended without verification of fit and seat geometry for the corner tool head T618-1TM. What torque is recommended for the M4x10 Torx screw? Consistent torque application with a T15 driver is advised; the M4x10 fixing secures the insert reliably and reduces movement during machining of the T618-1TM. Which toolholder shank sizes are compatible? The head requires a toolholder or adapter with a 27 mm mounting diameter to ensure correct seating and minimal runout. How does the head influence tool life and surface finish? By providing a stable platform and accepting multi-edge SNHU 1206 inserts, the head supports longer effective tool life and more consistent surface finish across production runs. Is the T618-1TM suitable for compact setups with limited overhang? Yes; the 50 mm overall length and balanced mass of 0.968 kg make the unit appropriate where reduced overhang and compact installation are needed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Milling Head ANKX 1607 L50mm With Internal Coolant, 6 Cutting Edges - Teknik Makina
Take advantage of the combination of robust compatibility, integrated coolant delivery and compact geometry for reliable turning performance and reduced tool changes; order the component directly via Metav Werkzeuge or consult our advisors for application guidance. Corner tool head – 80 mm diameter, internal coolant, for ANKX 1607 indexable inserts by Teknik Makina Corner tool head for ANKX 1607 indexable inserts, designed for precise 90° turning and compact installations with internal coolant to support continuous machining. 80 mm diameter for deep reach Integrated internal coolant for edge cooling Compatible with ANKX 1607 indexable inserts Six usable cutting edges for extended service Greater throughput through optimised geometry The large 80 mm diameter and 90° cutting angle ensure stable contact between the insert and workpiece, which reduces vibration and improves surface quality. This geometry is especially advantageous when working on parts that require a true corner finish or where machine rigidity is limited. The presence of six cutting edges extends the time between indexings, lowering tool-change frequency and increasing net machining time on production runs. Improved tool life and process security with internal coolant The built-in internal coolant delivers cutting fluid directly to the insert seat and cutting edge, assuring effective heat dissipation and lubrication at the point of contact. This targeted cooling reduces thermal deformation and flank wear, which in turn stabilises dimensional tolerances and prolongs tool life. For operations where chip control is critical, the controlled coolant flow supports consistent chip formation and evacuation, improving repeatability in serial production. Flexible compatibility that simplifies stock management Designed for use with ANKX 1607 indexable inserts, the head accepts inserts from established suppliers such as XTC and Gesac, simplifying procurement and stocking. The design includes a Torx retention system keyed for T15 Torx, enabling straightforward insert clamping and replacement with standard workshop tools. These compatibility choices make integration into existing tool families effortless and reduce the need to maintain multiple specialised holders. Compact design for workshop efficiency and reliable supply With an overall length of 50 mm and a weight of 1.101 kg, the compact tool head fits tight setups and short overhangs while still delivering the rigidity required for stable turning. Supplied by Teknik Makina, the component is built for industrial use where predictable performance and consistent availability matter. Sourcing via Metav ensures a European distribution channel with stock reliability and an experienced partner for precision tooling needs. For reliable integration and delivery of the Teknik Makina 80 mm corner tool head (SKU T173-1TM), contact Metav Werkzeuge for tailored compatibility advice and order support at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: T173-1TM Product type: Corner tool head Name: 80mm corner tool head for ANKX 1607 indexable inserts Manufacturer: Teknik Makina Core technical data Diameter: 80 mm Overall length: 50 mm Weight: 1.101 kg Cutting edges: 6 Cutting angle: 90° Special features Internal coolant: yes Compatible inserts: ANKX 1607 Compatible insert manufacturers: XTC, Gesac Torx key: T15 Eclass: 21181015 FAQ What insert type is required for this head? The head is designed for ANKX 1607 indexable inserts and accepts compatible inserts from suppliers such as XTC and Gesac. Does the head provide coolant to the cutting edge? Yes, the component features internal coolant routing to lubricate and cool the insert at the cutting zone. How many usable cutting edges are available per insert position? The design supports six usable cutting edges, allowing extended intervals between indexings. What retention tool is required for insert clamping? Insert clamping and retention use a T15 Torx key for secure and repeatable fastening. Is this head suitable for compact turning setups? With a 50 mm overall length and a solid construction, the head is intended for compact installations where reduced overhang improves rigidity. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Milling Head for APMT 11T3 Indexable Inserts L50mm Internal Cooling - Teknik Makina
Benefit from the combination of internal coolant, a robust 80 mm cutter body and compatibility with APMT 11T3 indexable inserts for consistent 90° shoulder milling. Order the T256-1TM via Metav Werkzeuge or ask our consultants for tailored application support. T256-1TM corner milling head — 80 mm diameter with internal coolant (Teknik Makina) The T256-1TM corner milling head provides 90° shoulder milling with internal coolant and is designed for use with APMT 11T3 indexable inserts in general machining and finishing operations. Internal coolant for improved chip evacuation 80 mm diameter for robust shoulder milling Holds APMT 11T3 indexable inserts by Korloy 90° cutting angle with eight cutting edges Stable geometry for precise shoulder milling The heavy-duty cutter body delivers a consistent cutting geometry that reduces deflection during shoulder and face milling, ensuring repeatable results. The 80 mm diameter and solid construction provide the rigidity needed to maintain a true 90° profile across long runs, which translates into fewer reworks and a more efficient production flow. This structural stability supports higher feed rates where the machine and inserts allow it, improving cycle times without compromising surface quality. Controlled cooling and reduced tool wear Integrated internal coolant channels direct cutting fluid close to the cutting zone, lowering temperatures and improving chip evacuation. The result is extended insert life and more predictable tool-change intervals. Compatibility with APMT 11T3 indexable inserts—commonly available from Korloy—simplifies inventory and speeds up maintenance procedures. Where high demands on surface finish and dimensional stability exist, this cooling arrangement helps maintain consistent cutting conditions and reduces thermal distortion. Secure clamping and workshop efficiency The cutter uses Torx fastening with a T8 key and M2.5x5.5 Torx screws for reliable insert retention, offering secure clamping under moderate to heavy cutting forces. With eight cutting edges distributed for balanced machining, the tool minimises vibration and helps achieve smoother finishes. The compact 50 mm total length supports close-up machining in constrained setups while the overall mass contributes to dampening and stability—factors that collectively boost throughput and reduce scrap rates. Order the Teknik Makina T256-1TM corner milling head through Metav Werkzeuge for assured availability and expert application advice; contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations Technical data SKU: T256-1TM Product type: Corner milling head Brand: Teknik Makina Label: 80mm Eckmesserkopf APMT 11T3 L50mm mit Innenkühlung Core data Diameter: 80 mm Total length: 50 mm Weight: 1.115 kg Cutting edges: 8 Cutting angle: 90° Torx key size: T8 Torx screw: M2,5x5,5 Special features Internal coolant For APMT 11T3 indexable inserts Compatible insert manufacturer: Korloy 90° shoulder milling capability FAQ Which indexable inserts fit this milling head? The T256-1TM accepts APMT 11T3 indexable inserts; compatibility with Korloy inserts is specified for immediate use. Does the tool provide internal coolant? Yes, the cutter body features internal coolant channels that direct fluid to the cutting zone to improve chip control and insert life. What applications is this milling head best suited for? The tool is designed for 90° shoulder and face milling where rigid, repeatable geometry and good surface finish are required. How many cutting edges are available per tool body? The milling head is configured with eight cutting edges, arranged to balance cutting forces and reduce vibration. Which fastening system secures the inserts? Inserts are secured with Torx screws (M2.5x5.5) tightened using a T8 Torx key to ensure reliable clamping during machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Milling Head for APMT 1604 Indexable Inserts L52mm With Internal Coolant - Teknik Makina
Combining internal coolant, an 80 mm diameter and direct compatibility with APMT 1604 indexable inserts delivers stable corner milling with extended tool life and consistent surface quality; order the Eckmesserkopf directly via Metav Werkzeuge or ask our consultants if needed. Eckmesserkopf (Corner milling head) – 80 mm with internal coolant Eckmesserkopf (for APMT 1604 Indexable Inserts) designed for precise 90° corner milling and efficient chip evacuation in CNC turning and milling applications. 80 mm diameter for stable machining Internal coolant for improved tool life Compatible with APMT 1604 inserts (Korloy) Seven insert positions for efficient cuts Faster, cooler cutting for longer tool life The integrated internal coolant channel directs coolant precisely to the cutting zone, reducing cutting temperatures and improving chip control. This results in longer insert life and fewer unscheduled tool changes, which increases uptime in production. Designed for use with APMT 1604 indexable inserts, the assembly supports high-feed cornering and controlled material removal in a variety of alloy and steel applications. Accurate 90° cutting for consistent corner finishes A true 90° cutting angle ensures reliable right‑angle profiles and reduces the need for secondary finishing operations. The cutter geometry and support structure provide consistent radial location and repeatable results across serial production, helping to maintain tight tolerances and minimise rework. Engineers benefit from predictable machining behaviour and improved first-pass yield when integrating this milling head into tool plans. Secure fastening and compact overall length for stable setups Fastening uses M4x10 screws tightened with a T15 Torx key, providing a secure clamp for each insert pocket and straightforward serviceability during insert changes. The compact 52 mm overall length reduces overhang and improves rigidity, while the component mass of 1.249 kg contributes to vibration damping for smoother surface finishes. These mechanical details translate into more stable cuts and reduced risk of insert movement under load. Broad compatibility that simplifies tool management The corner milling head accepts APMT 1604 indexable inserts and is confirmed compatible with inserts from Korloy, enabling workshop standardisation and flexible stocking. With seven insert positions, the tool allows extended runtime between maintenance intervals and efficient utilisation of each indexable edge. The design is intended for seamless integration into CNC toolholders and modular tool systems, supporting efficient changeover and consistent process control. Contact Metav Werkzeuge for tailored technical advice on the Teknik Makina corner milling head or to request a specification sheet; Metav Werkzeuge can advise on integration and stocking strategies for your workshop. Technical Data Article number: T247-1TM Label: 80mm Eckmesserkopf APMT 1604 L52mm mit Innenkühlung Manufacturer: Teknik Makina Specifications Diameter: 80 mm Overall length: 52 mm Weight: 1.249 kg Cutting angle: 90° Insert positions: 7 Torx screw: M4x10 Torx key: T15 Compatibility & Features For APMT 1604 indexable inserts Compatible insert manufacturer: Korloy Internal coolant: yes eClass: 21181015 SKU: T247-1TM FAQ What insert type fits this milling head? The Eckmesserkopf accepts APMT 1604 indexable inserts; Korloy inserts have been confirmed compatible with this Tek​nik Makina tool (SKU T247-1TM). Does the head provide coolant to the cutting edge? Yes, the corner milling head features internal coolant, which supplies fluid directly to the cutting zone to improve tool life and chip evacuation. How many insert positions are available on the cutter? The tool offers seven insert positions, allowing extended use before a full reindex and efficient utilisation of each insert edge. What fasteners are used for the inserts? Inserts are secured with M4x10 screws tightened with a T15 Torx key for secure clamping and straightforward servicing. Is this head suitable for right‑angle corner machining? Yes, the milling head is configured for a 90° cutting angle, designed to deliver consistent right‑angle finishes in production settings. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Milling Head For LNMX 1006 Indexable Inserts 90° Cutting Angle, M3x7 Torx Screw - Teknik Makina
Take advantage of a precise 90° cutting geometry combined with a robust Ø80 mm head and shank Ø27 mm for secure mounting; this configuration supports reliable corner turning with LNMX 1006 indexable inserts. Order the component directly via Metav Werkzeuge or consult the Metav team for fitment advice. Corner Insert Head — for LNMX 1006 indexable inserts, 90° cutting angle (Teknik Makina) A compact and stable Corner Insert Head designed for precision corner turning with LNMX 1006 indexable inserts, suitable for workshop and production turning applications. Compatible with LNMX 1006 inserts 90° cutting angle for accurate corner machining Ø80 mm head diameter for stability Mounting shank Ø27 mm for secure attachment Precision cornering that reduces rework This tool head delivers a defined 90° cutting angle, ensuring consistent corner geometry across consecutive parts. The combination of a substantial Ø80 mm head diameter and a robust shank Ø27 mm reduces vibration and run-out, which translates into tighter tolerances and less post-process correction. Because the head is built for use with indexable inserts, insert changes are predictable and repeatable, enabling stable cycle times and lower scrap rates in batch production. Quick insert changes and secure fastening Fast and safe insert retention is provided via the supplied Torx M3x7 fastening screw and requires a T8 key for assembly. This standardised fastening concept speeds up maintenance and lowers machine downtime compared with clamping systems that need more complex tools. Compatibility with Korloy insert variants for the LNMX 1006 family increases sourcing flexibility and keeps tooling costs under control by using widely available inserts. Built for continuous production and versatile use With a measured weight of 0.731 kg and an overall length of 50 mm, the head balances rigidity with compactness for crowded tool turrets or multi-station setups. The design lists 7 cutting edges, supporting multi-edge operations where applicable, and the clear interface to standard inserts simplifies integration. Together, these specifications help improve productivity through dependable tool life and consistent part quality. For reliable supply and application advice on the Teknik Makina Corner Insert Head (SKU T389TM), contact Metav Werkzeuge in Emmerich—they provide technical guidance and fast delivery from their European quality hub Technical Data Article number: T389TM Manufacturer: Teknik Makina Dimensions & Core Data Head diameter: Ø80 mm Shank diameter (mounting): Ø27 mm Overall length: 50 mm Cutting angle: 90° Weight: 0.731 kg Cutting edges: 7 Features & Compatibility For LNMX 1006 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M3x7 Torx key required: T8 Suitable for corner turning applications FAQ Is this head compatible with LNMX 1006 inserts? Yes. The Corner Insert Head is designed for LNMX 1006 indexable inserts and accepts Korloy-compatible variants. What fastening hardware is required to mount an insert? The head uses a Torx M3x7 screw for insert retention and a T8 key for fastening and removal. What are the main mounting dimensions to check on the turret? Important dimensions are the head diameter Ø80 mm, the mounting shank Ø27 mm, and the overall length 50 mm; verify turret clearance and reach accordingly. How heavy is the tool head and how does that affect setup? The head weighs 0.731 kg, offering a balance between rigidity and low added mass for many turret and toolpost configurations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Milling Head for SPMT 1204 Indexable Inserts with Internal Coolant, 50mm - Teknik Makina
Take advantage of a compact, high-stability solution that combines internal coolant, an 80 mm diameter body and a short 50 mm overall length to maintain cutting performance and reduce thermal distortion; order the tool directly via Metav Werkzeuge or consult our specialists for integration support. Indexable Corner Head T652-1TM – 80 mm diameter, internal coolant The Indexable Corner Head T652-1TM is an indexable corner tool head engineered for external turning and profile machining using SPMT 1204 indexable inserts, designed to meet workshop and production requirements. 80 mm diameter for stable cutting Internal coolant for optimised cooling Compatible with SPMT 1204 inserts Six indexed cutting edges to reduce downtime Consistent cutting temperature for longer tool life An integrated internal coolant channel ensures cutting zones remain cool, which reduces thermal wear and maintains insert geometry for longer periods. By supplying coolant directly to the cutting edge, the head lowers flank wear and helps preserve surface integrity on the workpiece. This design leads to fewer stoppages for insert replacement and a steadier process window in production, delivering measurable efficiency gains in high-throughput turning applications. Rigidity and geometry for predictable surface finish The combination of an 80 mm body and a 50 mm overall length provides a compact, rigid mounting that reduces vibration and chatter during machining. The head’s 90° cutting angle gives a predictable engagement for corner and shoulder operations, supporting repeatable surface quality and dimensional consistency. The relatively substantial mass (approx. 1.186 kg) contributes to stability without compromising accessibility on compact tool turrets. Fast indexability and secure clamping for minimal downtime Designed for SPMT 1204 inserts, the head accommodates six indexed cutting edges, allowing multiple repositions of each insert before replacement. Insert retention uses a Torx T20 key and M5x12 fastener for reliable clamping and straightforward maintenance. The indexable system reduces tooling costs per edge and simplifies workshop routines, enabling quick changeovers that keep cycle times low and throughput high. Production-ready design for easy integration The T652-1TM is built to slot into existing turning setups where indexable insert tooling is standard. Its compatibility with common insert geometry and standard fasteners makes it straightforward to adopt without special fixtures. The compact profile helps maintain close tool-to-workpiece clearances, making the head suitable for shoulders, facing and light profiling tasks. For buyers seeking a pragmatic balance of performance and serviceability, this head supports sustained production with predictable outcomes. For purchase enquiries or technical evaluation of Teknik Cutting Tools' Indexable Corner Head T652-1TM, contact Metav Werkzeuge in Emmerich for rapid supply and expert advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: T652-1TM Product type: Indexable corner head Manufacturer: Teknik Makina ECLASS: 21181015 Label: 80mm Eckmesserkopf SPMT 1204 L50mm with internal coolant Facts Diameter: 80 mm Overall length: 50 mm Weight: 1.186 kg Number of cutting edges: 6 Cutting angle: 90° Fastening: Torx T20 Screw: M5x12 Internal coolant: yes Special features For SPMT 1204 indexable inserts Short, rigid design for low overhang Six indexed positions per insert Secure Torx clamping system FAQ Which inserts are compatible with this tool? The head is designed specifically for SPMT 1204 indexable inserts and performs optimally with that insert geometry. Does the head provide internal cooling? Yes, the T652-1TM features internal coolant to direct fluid to the cutting zone and improve tool life. How many usable cutting edges does each insert offer? Each insert can be indexed to make use of six indexed cutting edges before replacement is required. What fastening system secures the inserts? Insert clamping uses a Torx T20 key and M5x12 screw for reliable retention. What are the key dimensions and weight? Nominal dimensions are 80 mm diameter and 50 mm overall length, with a weight of approximately 1.186 kg. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Tool Head ANKX 1205 L50mm Internal Coolant, 90° Cutting Angle - Teknik Makina
Take advantage of a robust combination of stable 80 mm diameter design, internal coolant and compatibility with ANKX 1205 indexable inserts for consistent, high-quality shoulder turning. Order the tool directly via Metav Werkzeuge or consult our specialists for technical matching and delivery. Corner tool head by Teknik Makina — 80 mm diameter, internal coolant Corner tool head for turning applications with ANKX 1205 indexable inserts, optimised for square-shoulder cuts and reliable chip evacuation 80 mm diameter for stable cutting Internal coolant for improved chip control Compatible with ANKX 1205 indexable inserts 90° cutting angle for square shoulder operations High rigidity and consistent machining accuracy The corner tool head is engineered to deliver repeatable results in demanding turning tasks. Its 80 mm diameter and L50 mm overall length provide a stiff mounting platform that reduces vibration and improves surface finish when performing shoulder and square cuts. The combination of a short overhang and a compact mass (approx. 1.21 kg) minimises deflection, which helps maintain tolerances and extends insert life. The head’s geometry supports a 90° cutting approach, making it particularly suitable for precise shoulder creation and finishing operations on a range of components. Integrated coolant for improved tool life and chip control Built-in internal coolant supplies cutting fluid directly to the cutting zone, improving lubrication and cooling at the insert edge. This targeted fluid delivery reduces thermal loading, lowers flank wear and assists in efficient chip breaking and evacuation, which is essential during continuous production. For series production and interrupted cuts, the internal feed helps maintain consistent cutting conditions and contributes to more predictable tool-change intervals. The result is reduced downtime and fewer surface defects in the finished part. Quick, secure assembly and insert compatibility Assembly and insert changes are simplified with a standard T15 Torx key drive and M4x10 fixing screw specification, enabling quick replacement of indexable inserts. The holder is designed specifically for ANKX 1205 indexable inserts and is compatible with inserts from ISCAR, ensuring a broad choice of grades and chipbreakers for different materials and cutting conditions. The clear specification of fastening hardware and standardised interface supports fast setup on the machine and straightforward maintenance procedures in the workshop. Suited to industrial production and varied materials Designed for CNC turning centres and production lathes, this turning head is a robust option for work requiring square shoulders and precise edges. The head’s construction and interface allow selection of appropriate insert grades for machining steels, stainless steels and non-ferrous alloys; combine the holder with the correct insert geometry and coating to match application needs. Marked with SKU: T576-1TM, the component suits toolrooms seeking a durable, serviceable solution that integrates into existing toolholding systems without complex adaptation. Contact Metav Werkzeuge for tailored technical advice on this Teknik Cutting Tools corner tool head and to confirm compatibility with specific machines or insert grades — call +49 2822 7131930 or email info@metav-werkzeuge.com for supply and specification support Technical Data SKU: T576-1TM Label: 80mm Eckmesserkopf ANKX 1205 L50mm mit Innenkühlung ECLASS: 21181015 Facts Diameter: 80 mm Overall length: 50 mm Mounting diameter: 27 mm Weight: 1.21 kg Number of cutting edges: 7 Cutting angle: 90° Special features Internal coolant: yes Compatible inserts: ANKX 1205 Suitable insert manufacturer: ISCAR Fastening: Torx T15, screw M4x10 Product type: Eckmesserkopf Manufacturer: Teknik Makina FAQ What insert type does this tool holder accept? The holder is designed for ANKX 1205 indexable inserts; ISCAR grades are compatible and allow selection of appropriate chipbreakers and coatings. Does the head provide coolant to the cutting edge? Yes, the turning head features internal coolant to deliver fluid directly to the insert tip for improved cooling and chip control. Which fastening hardware is required for insert clamping? Fastening uses a T15 Torx drive with M4x10 screws for secure and repeatable insert clamping. Is this component suitable for heavy-duty production turning? The design prioritises rigidity (80 mm diameter and short overhang) for stable shoulder cuts, making it suitable for many production turning applications. How is the product identified for ordering? The component is listed under SKU: T576-1TM, which can be used to confirm the exact configuration when ordering. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Corner Tool Head ANKX 1706 L52mm Internal Cooling, 6 Cutting Edges, 90° - Teknik Makina
Combine 90° cutting geometry, internal coolant and an 80 mm head diameter for consistent, high‑stability metal removal — ideal where repeatable accuracy and tool life matter. Order the angle tool head directly via Metav Werkzeuge or consult our specialists for application advice. Angle tool head (Eckmesserkopf) – 90° cutting angle, internal coolant (Teknik Makina) Angle tool head (Eckmesserkopf) for precision machining with ANKX 1706 indexable inserts, suitable for demanding turning and profiling operations 90° cutting angle for square shoulders Internal coolant for improved chip control Compatible with ANKX 1706 inserts (ISCAR compatible) 80 mm head diameter for stable engagement Six usable cutting edges for extended runtime Higher production throughput with consistent geometry The 90° cutting angle delivers reproducible shoulder and contour work while reducing the need for secondary operations. Built with an 80 mm head diameter, this holder provides a larger contact area to dampen vibration and improve surface finish. The result is a measurable increase in process stability and fewer rejects, making the toolhead a practical choice for serial production where cycle time and consistency are priorities. Longer tool life and cleaner machining thanks to internal coolant Integrated internal coolant channels bring cooling and lubrication directly to the cutting zone, which reduces thermal load and promotes controlled chip formation. By directing fluid to the insert nose, heat is managed more effectively, extending the life of the insert and lowering tooling costs per component. The use of a secure fastening system with M5x12 screws and T20 Torx key engagement ensures repeatable clamping torque and minimal downtime during insert changes. Simple compatibility and workshop integration Designed for ANKX 1706 indexable inserts and ISCAR-compatible geometries, the head integrates easily into existing tool inventories. With six cutting edges available, indexation frequency is reduced and operational availability is increased. The compact overall length of 52 mm supports installation in constrained toolposts while maintaining a robust connection to the machine, aiding quick setup and predictable machining performance. Contact Metav Werkzeuge for tailored advice on integrating this Teknik Makina angle tool head into existing turning processes or to request application-specific data and availability. Technical Data Article number: T446-1TM Label: 80 mm angle tool head ANKX 1706 L52 mm with internal coolant Manufacturer: Teknik Makina Data Diameter: 80 mm Overall length: 52 mm Weight: 1.238 kg Cutting edges: 6 Cutting angle: 90° Torx screw: M5x12 Torx key: T20 ECLASS: 21181015 Special features Internal coolant Compatible with ANKX 1706 indexable inserts ISCAR-compatible inserts Robust screw fastening FAQ Can this head use standard ANKX 1706 inserts? Yes. The angle tool head is specified for ANKX 1706 indexable inserts and accepts ISCAR‑compatible grades and geometries. Is internal coolant supplied through the holder? Internal coolant is integrated in the tool head to deliver cutting fluid directly to the insert nose, improving chip control and tool life. How many cutting edges are available before regrind or replacement? The head provides six usable cutting edges, allowing multiple indexations to extend runtime between replacements. Which Torx key is required for insert clamping? Insert clamping uses a T20 Torx key with M5x12 Torx screws for secure and repeatable fastening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Tool Head BDMT 1704 L50mm Internal Coolant - Teknik Makina
Combining robust 80 mm diameter stability, internal coolant and compatibility with BDMT 1704 Kyocera inserts delivers consistent corner-turning performance and reduced setup time; order the Eckmesserkopf directly via Metav Werkzeuge or ask our consultants if needed. Eckmesserkopf for BDMT 1704 indexable inserts — 80 mm diameter, internal coolant (Teknik Makina) A compact Eckmesserkopf designed for precision external turning with BDMT 1704 indexable inserts, optimised for corner operations and continuous chip evacuation. 80 mm diameter for stable cutting Internal coolant for improved chip control Compatible with BDMT 1704 Kyocera inserts 90° cutting angle for corner operations Stable machining with measurable rigidity The tool head is engineered around an 80 mm diameter body that increases stiffness during heavy cuts, helping to reduce vibration and improve surface finish. The robust construction and a total length of 50 mm provide a compact cutting geometry that shortens overhang and enhances tool life. Specified mass of 1.165 kg contributes to dynamic stability on the turret, enabling repeatable results in serial turning. These design choices translate into fewer rejects and less rework in small-batch and production environments. Enhanced process control through internal coolant Integrated internal coolant channels direct lubricant and coolant to the cutting edge, improving chip breaking and heat extraction at the tool–workpiece interface. For materials that demand effective cooling — such as alloyed steels and stainless applications — this feature maintains cutting-edge integrity and extends insert life. The head accepts standard fixings (Torx T15 key, screw M4x10), making maintenance straightforward and reducing downtime for insert changes and coolant checks. Broad compatibility for flexible tooling setups Designed for BDMT 1704 indexable inserts and compatible with Kyocera insert geometries, the cutting head supports standard indexable tooling systems common in modern turning shops. The 90° cutting angle is optimised for corner-facing and profiling tasks where precise right-angle engagement is required. By supporting widely used insert formats, the head simplifies inventory and allows straightforward integration into existing tool cycles without reprogramming the machine path. Practical advantages for workshop productivity With simple fastening and serviceability, the head minimises changeover time while preserving repeatability across shifts. The compact footprint and coolant capability make it suitable for mixed-production environments where operators switch between materials and batch sizes. Clear specification and established fastening methods give purchasing and production teams a verifiable basis for standardisation and predictable process planning. For reliable corner-turning performance choose the Teknik Makina T540-1TM Eckmesserkopf from Metav Werkzeuge and benefit from quick integration into existing tool systems — contact Metav Werkzeuge for tailored advice and order assistance. Technical Data SKU: T540-1TM Product: Eckmesserkopf Label: 80mm Eckmesserkopf BDMT 1704 L50mm mit Innenkühlung Article name (EN): for BDMT 1704 Indexable Inserts ECLASS: 21181015 Manufacturer: Teknik Makina Facts Diameter: 80 mm Total length: 50 mm Weight: 1.165 kg Number of cutting edges: 7 Cutting angle: 90° Torx key: T15 Torx screw: M4x10 Special features Internal coolant For BDMT 1704 indexable inserts Compatible insert manufacturer: Kyocera Compact design for reduced overhang FAQ What materials can be machined with this head? The Eckmesserkopf is intended for general turning tasks; material suitability depends on the chosen BDMT 1704 insert grade and cutting data rather than the head itself. Does the head support internal coolant delivery? Yes, the tool head features internal coolant channels to supply lubricant directly to the cutting edge, improving chip control and thermal management. Which insert type fits this head? BDMT 1704 indexable inserts are supported; the head is configured for common Kyocera insert geometries and clamping methods. How is the insert secured and serviced? Inserts are fastened using the specified Torx T15 key and M4x10 screw; this standard approach enables quick changeovers and consistent clamping force. Is the T540-1TM suitable for corner-facing operations? Yes, the 90° cutting angle and compact geometry are optimised for precise corner-facing and profiling tasks with repeatable results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Tool Head for ADKT 1505 Indexable Inserts L52mm Internal Coolant - Teknik Makina
Benefit from a compact design that delivers stable 90° turning, precise insert seating and improved tool life through internal coolant — an economical choice for workshop integration. Order the component via Metav Werkzeuge or consult our specialists for application-specific advice. Corner tool head for ADKT 1505 Indexable Inserts — 80 mm, internal coolant Corner tool head for ADKT 1505 indexable inserts, engineered for precise 90° turning tasks in industrial turning operations. 80 mm diameter for stable clamping Internal coolant for improved chip evacuation Compatible with ISCAR ADKT 1505 inserts Torx T15 / M4x10 fastening for secure mounting Precision where form meets function The corner tool head is built to give a consistent, repeatable interface between machine and cutting edge. With a nominal 80 mm diameter and a 90° cutting angle, the design reduces deflection and supports accurate shoulder and face turning. The use of standard ADKT 1505 indexable inserts ensures familiar geometry and quick replacement intervals, which keeps downtime to a minimum. The robust construction and precise seating contribute to consistent surface finishes and tighter process control for batch and single-part production. Coolant delivery for longer tool life and cleaner chips An integrated internal coolant channel directs cutting fluid close to the insert rake, promoting efficient cooling and improved chip evacuation. This targeted coolant supply reduces thermal load on the cutting edge and helps prevent built-up edge, which in turn extends insert life and maintains dimensional stability. For workshops that prioritise productivity, the result is fewer insert changes and a more predictable tool-cost profile without compromising machining quality. Secure fastening and proven compatibility Fastening uses M4x10 Torx screws driven with a T15 key for secure, vibration-resistant clamping of the insert seat. The head is specified for use with ISCAR-compatible ADKT 1505 inserts, providing wide availability of grades and geometries for a variety of jobs. Manufactured by Teknik Makina, the unit is produced to industrial tolerances that support repeatable indexability and safe mounting in automated and manual turret systems. Compact dimensions for flexible integration With a total length of 52 mm and a mass of 1.152 kg, the component balances rigidity with compactness to fit into confined tool stations while still providing the mass needed for stable cuts. The assembly is identified as T206-1TM for ordering and inventory. Its combination of compact profile, coolant capability and compatible insert geometry makes it suitable for production environments seeking to standardise tooling across turning applications. For procurement or application guidance on the Teknik Makina corner tool head T206-1TM, contact Metav Werkzeuge for ordering and technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T206-1TM Article name: Corner tool head for ADKT 1505 Indexable Inserts Manufacturer: Teknik Makina Dimensions & measurable data Diameter: 80 mm Total length: 52 mm Weight: 1.152 kg Cutting angle: 90° Cutting edges: 7 eClass: 21181015 Torx screw: M4x10 Torx key: T15 Features & compatibility Internal coolant: yes Compatible inserts: ADKT 1505 (ISCAR) Product type: Corner tool head Label: 80mm Eckmesserkopf ADKT 1505 L52mm mit Innenkühlung UID: T206-1TM FAQ Which insert type fits this head? The head accepts ADKT 1505 indexable inserts and is specified for compatibility with ISCAR-manufactured inserts, ensuring broad availability of grades and geometries. Is coolant channeling supported? Yes — the component features internal coolant delivery to the insert zone for improved cooling and chip evacuation. What fastening hardware is required? Fastening uses M4x10 Torx screws tightened with a T15 key to secure inserts reliably in the seat. What are the main dimensions to check for turret clearance? Key dimensions are 80 mm diameter and 52 mm total length; the mass is 1.152 kg, which aids in assessing clearance and balance on the turret. How is the product identified for ordering? Order or reference the item by its SKU T206-1TM or label information for procurement and stock management. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Tool Head For AP-- 1604 Indexable Inserts L52mm With Internal Coolant - Teknik Makina
Take advantage of the combination of rigid 80 mm diameter construction, internal coolant and compatibility with AP-- 1604 indexable inserts for stable, repeatable corner turning. Order the tool directly via Metav Werkzeuge or consult our specialists for application-specific advice. Corner cutter head T187-1TM — 80 mm diameter, internal coolant (Teknik Makina) The corner cutter head for AP-- 1604 indexable inserts is designed for precise shoulder and corner turning in CNC lathe operations, offering a compact 52 mm overall length and a rigid 80 mm body to support consistent cutting performance. 80 mm diameter for stable machining Internal coolant for improved chip evacuation Compatible with AP-- 1604 indexable inserts Torx T15 screw, M4x10 fastening Stable machining for reliable production The robust 80 mm body and a 90° cutting angle deliver a secure platform for shoulder cuts and corner turning, reducing vibration and improving surface finish. With seven cutting edges the head supports reliable indexable-insert seating and repeatable engagement, which directly lowers scrap rates and machining variance. The compact overall length of 52 mm keeps overhang minimal, helping to maintain rigidity even in confined setups and contributing to predictable cycle times. Optimised cooling to extend insert life Integrated internal coolant channels focus lubricant and coolant at the cutting zone to aid chip evacuation and reduce thermal load on the insert, which prolongs tool life and maintains consistent cutting conditions. For workshop managers this means longer runs between index changes and fewer unplanned stops; for operators it offers improved surface integrity. Compatibility with Korloy AP-- 1604 indexable inserts ensures access to a wide range of grades suitable for varied steels and non-ferrous materials. Quick assembly and secure fastening for efficient changeover The head uses an M4x10 fastening screw with Torx T15 drive for secure, repeatable clamping of the insert pocket, enabling fast tool changes and minimal set-up time. The unit’s design supports straightforward alignment in existing holders and reduces downtime during batch swaps. Supplied by Teknik Makina and identified as SKU T187-1TM, this head fits typical lathe toolposts where AP-- 1604 inserts are standard, simplifying inventory and ensuring compatibility across common turning applications. Contact Metav Werkzeuge in Emmerich for tailored advice, delivery options and fast supply of the Teknik Makina corner cutter head T187-1TM with internal coolant Technical Data Article number: T187-1TM Manufacturer: Teknik Makina Product type: Corner cutter head For: AP-- 1604 indexable inserts Core technical data Diameter: 80 mm Overall length: 52 mm Weight: 1.249 kg Cutting angle: 90° Cutting edges: 7 Special features Internal coolant Compatible with Korloy AP-- 1604 inserts Torx T15 screw, M4x10 fastening FAQ Which indexable inserts fit this head? The head accepts AP-- 1604 indexable inserts; compatibility with Korloy grades is specified for the corner cutter head T187-1TM supplied by Teknik Makina. Does the tool support internal coolant? Yes, the T187-1TM has internal coolant channels to direct coolant to the cutting zone and improve chip evacuation. What fasteners are required for assembly? Assembly uses an M4x10 fastening screw with a Torx T15 drive for secure and repeatable clamping of the insert. What are the main dimensions and weight? Diameter is 80 mm, overall length is 52 mm and weight is 1.249 kg for the Teknik Makina corner cutter head (SKU T187-1TM). Is the head suitable for shoulder and corner turning? The 90° cutting angle and compact design make the head well suited to shoulder and corner turning operations in lathe setups. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Tool Head for AP-- 1604 Indexable Inserts L52mm With Internal Coolant - Teknik Makina
The combination of internal coolant, an 80 mm diameter and compatibility with AP-- 1604 indexable inserts ensures stable shoulder turning, improved insert life and predictable chip control; order the corner tool head directly via Metav Werkzeuge or contact our consultants for application support. Eckmesserkopf – corner tool head with internal coolant, Ø 80 mm (Teknik Makina) A compact corner tool head designed for shoulder turning and facing with AP-- 1604 indexable inserts; ideal where coolant-fed chip control and a 90° cutting angle are required 80 mm diameter for stable tool engagement Internal coolant for improved insert life Compatible with AP-- 1604 indexable inserts Shank connection Ø 27 mm for common toolposts Consistent metal removal with coolant-supported cutting The corner tool head is engineered to deliver steady machining results in shoulder turning and facing operations. Thanks to the internal coolant channel, coolant is fed directly to the cutting edge, which reduces thermal load and encourages reliable chip breaking. The 90° cutting angle promotes square shoulders and minimal finishing passes, while the robust 80 mm body reduces vibration and maintains positional stability during heavier cuts. This combination of features supports predictable cycle times and repeatable tolerances in production runs. Minimise downtime through insert compatibility and secure fastening Compatibility with AP-- 1604 indexable inserts from recognised manufacturers such as Korloy simplifies tooling logistics and reduces set-up complexity. The head provides six effective cutting edges, allowing multiple indexings before replacement, and the fixing hardware uses a M4x10 screw tightened with a T15 Torx key for secure clamping. These practical design choices mean fewer interruptions for insert changes and a straightforward maintenance routine, helping to keep machine utilisation high across serial production. Installation, handling and practical benefits at the machine With a compact overall length of 52 mm and a standard connection diameter of 27 mm, the tool head integrates cleanly with common holders and toolposts. The balanced mass and precise geometry reduce chatter at the tool tip, improving surface finish and dimensional accuracy. For workshops aiming to consolidate tooling, the head’s compatibility with widely used indexable inserts enables fast stocking and consistent replacement cycles. For bespoke material requirements or unusual geometries, Metav Werkzeuge’s technical team can advise on suitable inserts and operating parameters. For precision-focused turning tasks consider Teknik Makina’s corner tool head T186-1TM—request a specification check or delivery from Metav Werkzeuge in Emmerich by calling +49 2822 7131930 or emailing info@metav-werkzeuge.com Technical data Article number: T186-1TM eClass: 21181015 Product type: Corner tool head Manufacturer: Teknik Makina Label: 80 mm corner tool head AP-- 1604 L52 mm with internal coolant Dimensions & core data Diameter: 80 mm Overall length: 52 mm Connection diameter: 27 mm Weight: 1.159 kg Cutting angle: 90° Number of cutting edges: 6 Torx key: T15 Fixing screw: M4x10 Compatibility & special features Internal coolant Suitable for AP-- 1604 indexable inserts Compatible insert manufacturer: Korloy SKU: T186-1TM Inclination/geometry: 90° cutting angle FAQ Which inserts fit this corner tool head? The Eckmesserkopf (corner tool head) is specified for AP-- 1604 indexable inserts; compatibility with Korloy-manufactured inserts is confirmed for standard grades and geometries. Does the tool head provide coolant to the cutting edge? Yes, the product features internal coolant, which delivers cutting fluid directly to the insert to aid cooling and chip evacuation. What are the key dimensions for mounting the head? The head has a diameter of 80 mm, an overall length of 52 mm and a connection diameter of 27 mm, matching common holder interfaces. How is the insert secured and serviced? Inserts are clamped with a M4x10 screw using a T15 Torx key for positive fixation; the design supports multiple indexings with six cutting edges before replacement. For which operations is this head primarily intended? The head is optimised for shoulder turning and facing operations with a 90° cutting angle, offering stable engagement and good surface finish in serial machining. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Tool Head for APKT 1003 Indexable Inserts L50mm Internal Coolant - Teknik Makina
Take advantage of the combination of 80 mm diameter, internal coolant and APKT 1003 compatibility to improve cycle stability and reduce rework; order the corner tool head directly via Metav Werkzeuge or consult our specialists for technical matching. Corner tool head — 80 mm diameter, internal coolant (for APKT 1003) The Corner tool head is intended for precision shoulder and face turning operations where reliable coolant delivery and fixed 90° cutting geometry are required 80 mm diameter for robust cutting head Internal coolant for improved chip evacuation Compatible with APKT 1003 Korloy inserts 90° cutting angle with 8 cutting edges Deliver predictable shoulder finishes with robust geometry The large 80 mm diameter and a true 90° cutting angle deliver a stable cutting platform for shoulder and face operations, reducing chatter and the need for rework. The substantial tool geometry is designed to maintain consistent cutting forces, which leads to repeatable surface quality and fewer set-up adjustments on serial production runs. This results in higher first-pass yield and improved overall process reliability. Maintain cutting performance with targeted coolant flow An integrated internal coolant channel supplies cutting fluid close to the insert seat, promoting efficient chip evacuation and thermal control at the cutting zone. By reducing heat buildup at the edge, the cooling path helps to extend insert life and maintain dimensional accuracy over longer cycles. For production environments that demand continuous performance, this targeted coolant delivery supports longer tool life and steadier machining parameters. Proven insert compatibility and secure mechanical fixing Designed for APKT 1003 indexable inserts and compatible with Korloy grades, the head accommodates standard insert geometries while ensuring secure clamping. Fastening uses a T8 Torx engagement with M2.5×5.5 screws for reproducible torque and reliable seating, reducing the risk of insert misalignment. The head provides eight cutting positions for balanced utilisation of indexable inserts, simplifying inventory management and lowering per-part tooling costs. Compact dimensions for simple integration and handling With an overall length of L50 mm and a solid construction weighing approximately 1.205 kg, the head balances rigidity with convenient handling during tool change and machine set-up. The compact form factor allows straightforward integration into existing tool systems while preserving a short overhang for improved stability. The model is stocked under SKU T179-1TM and is suitable for workshops seeking a durable, serviceable solution from Teknik Makina. Arrange a technical consultation with Metav Werkzeuge to confirm suitability for specific applications or to specify tooling and coolant routing for optimal performance; contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T179-1TM Product: Corner tool head Manufacturer: Teknik Makina Label: 80mm corner tool head APKT 1003 L50mm with internal coolant Facts Diameter: 80 mm Overall length: 50 mm Weight: 1.205 kg Cutting angle: 90° Cutting edges: 8 ECLASS: 21181015 Special features Internal coolant Compatible with APKT 1003 indexable inserts Compatible with Korloy inserts T8 Torx key engagement Torx screw M2.5×5.5 FAQ Which inserts fit this head? The head is intended for APKT 1003 indexable inserts; Korloy grades are specified as compatible for standard cutting applications. Does the tool provide internal coolant delivery? Yes, the head includes an internal coolant channel that directs fluid close to the insert for improved chip control and thermal management. What fastening hardware is required for insert clamping? Insert fastening uses a T8 Torx drive with M2.5×5.5 screws for consistent seating and repeatable torque. What are the key dimensions to consider for machine integration? Key dimensions are 80 mm diameter and L50 mm overall length, with a weight of approximately 1.205 kg, helping to assess overhang and fixture requirements. Can the head support high-feed finishing operations? The robust geometry and targeted coolant help maintain edge life and stability; suitability for specific feed and speed windows should be validated against the chosen insert grade and material. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Corner Tool Head For APMT 11T3 Indexable Inserts, 90° Cut Angle, 8 Cutting Edges, 27mm Shank Diameter - Teknik Makina
High rigidity from a 27 mm shank and a true 90° cutting angle ensures precise, repeatable corner cuts; compatibility with APMT 11T3 indexable inserts keeps tooling costs predictable — order the T256TM Corner Turning Head directly via Metav Werkzeuge or ask our consultants if needed. T256TM Corner Turning Head — Angle Tool Head for APMT 11T3 Inserts, 90° Cutting Angle (Teknik Makina) The T256TM Corner Turning Head is an angle tool head engineered for orthogonal turning operations using APMT 11T3 indexable inserts, providing a compact mounting solution for medium‑duty CNC turning applications. 90° cutting angle for orthogonal turning 27 mm shank diameter for rigid mounting Compatible with APMT 11T3 indexable inserts Torx screw M2.5 x 5.5, key size T8 Consistent edge engagement for accurate shoulders and faces The compact head geometry and 90° cutting angle are designed to deliver straight, repeatable shoulder and face cuts under typical shop conditions. A rigid 27 mm shank minimises deflection during cutting, which reduces rework and improves first‑pass accuracy. For users converting from brazed or brazed‑tip tooling, this holder allows faster tool changes and predictable cutting performance when fitted with the correct APMT 11T3 indexable inserts. Quick set‑up and clear compatibility for reduced downtime Installation and indexing are straightforward thanks to the defined clamping interface and the specified Torx fastener dimensions. The head accepts standard APMT 11T3 format inserts (Korloy listed as compatible), enabling easy sourcing from common carbide vendors and simplifying inventory. The Torx fastening specification (M2.5 x 5.5) and required key size (T8) are stated to help preparation of the correct workshop tools and avoid delays during tool changes. Designed for dependable workshop performance With a compact overall length and a Ø 80 mm head, the unit provides a space‑efficient solution where clearance is limited. The specified eight cutting edges and balanced mass (approx. 1.115 kg) support stable running at moderate spindle speeds, while the solid construction contributes to a long service life under normal operating conditions. The result is predictable cycle times and a stable surface finish on turned parts, reinforcing efficient production planning. For precision corner turning with Teknik Makina engineering, contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: T256TM Designation: Corner Turning Head (for APMT 11T3 indexable inserts) Manufacturer: Teknik Makina Core Data Shank diameter: 27 mm Head diameter: 80 mm Overall length: 50 mm Cutting angle: 90° Cutting edges: 8 Weight: 1.115 kg SKU: T256TM Special features Compatible with APMT 11T3 indexable inserts Compatible insert manufacturer: Korloy Torx screw: M2.5 x 5.5 Torx key size: T8 FAQ Which inserts fit this tool head? The T256TM accepts APMT 11T3 format indexable inserts; Korloy is listed as a compatible insert manufacturer for this holder. What is the shank diameter and how does it affect rigidity? The shank diameter is 27 mm; a larger shank increases rigidity and reduces deflection during orthogonal turning operations. What is the cutting geometry of the head? The head provides a 90° cutting angle, optimised for straight shoulder and face turning where a square approach is required. Which Torx specification is required for the clamping screw? The clamping screw specification is M2.5 x 5.5 and the Torx key size indicated is T8, which should be used for proper tightening. Is the head suitable for compact assemblies with limited clearance? Yes; the Ø 80 mm head and 50 mm overall length make the unit suitable where space is restricted while still offering a stable cutting platform. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Tool Head for LNGX 1307 Indexable Inserts L50mm Internal Cooling, 90° - Teknik Makina
Take advantage of the combination of robust design and precise coolant delivery to secure stable turning results and longer tool life; order the component via Metav Werkzeuge or consult the technical team for application advice. Eckmesserkopf — 80 mm angle tool head with internal coolant for LNGX 1307 indexable inserts by Teknik Makina The Eckmesserkopf is an angle tool head designed for precision turning with LNGX 1307 indexable inserts, offering internal coolant and a compact 50 mm overall length for stable machining in production environments. 80 mm diameter for robust cutting Internal coolant for improved tool life Compatible with LNGX 1307 indexable inserts 90° cutting angle with 50 mm overall length Precision and stability for repeatable turning results The angle tool head is engineered to provide a stable platform for turning operations. With an 80 mm diameter and a compact 50 mm overall length, the body minimises deflection and improves rigidity, which supports tighter tolerances on turned components. The combination of mass and geometry ensures vibration is reduced; as a result, surface finish consistency is improved and insert wear is diminished. The design is optimized for reliable performance in series production, where repeatability and minimal rework are decisive. Controlled cooling and secure clamping minimise downtime Built-in internal coolant channels deliver cutting fluid directly to the cutting zone, promoting effective chip evacuation and temperature control. The head uses a Torx T15 drive and M4x11 fastening screws for secure insert attachment, facilitating straightforward maintenance with common workshop tools. The tool head supports seven cutting edges and a 90° cutting angle, which together enable efficient material removal while maintaining predictable tool engagement. These features translate into fewer unplanned stops and simpler changeovers on the shop floor. Versatile application and dependable supply chain Compatible with LNGX 1307 indexable inserts from Walter, the component is suitable for a wide range of turning tasks where angular tool geometry is required. The construction and assembly are focused on long-term reliability; the moderate weight (1.124 kg) contributes to stable mounting without excessive inertia. For procurement and logistics, the product is offered through established partners to ensure availability and consistent quality control, supporting both small workshops and larger manufacturing operations. Request application guidance or place an enquiry through Metav Werkzeuge for supply and specification confirmation of this Teknik Makina angle tool head (SKU T493-1TM) with internal coolant and LNGX 1307 compatibility — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: T493-1TM Product: Angle tool head Compatible inserts: LNGX 1307 indexable inserts Facts Diameter: 80 mm Overall length: 50 mm Weight: 1.124 kg Cutting angle: 90° Cutting edges: 7 Torx key: T15 Torx screw: M4x11 E-class: 21181015 Special features Internal coolant Compatible with Walter indexable inserts Manufacturer designation: Teknik Makina FAQ Which insert type fits this angle tool head? The angle tool head is designed for LNGX 1307 indexable inserts and is compatible with inserts produced by Walter. Is internal coolant supplied through the tool body? Yes, the component includes internal coolant channels that feed the cutting zone directly to aid chip control and reduce thermal load. What is the cutting angle and how does it affect machining? A 90° cutting angle provides a neutral engagement that is beneficial for facing and perpendicular turning operations, helping to reduce cutting forces and promote stable tool life. What fastening hardware is used for the inserts? Inserts are secured using a Torx drive system; the head specifies a Torx T15 key and M4x11 fastening screws for reliable clamping. What is the SKU for ordering and reference? The SKU for this angle tool head is T493-1TM, which is used for order processing and product identification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Tool Head for SNHU 1206 Indexable Inserts 7 Cutting Edges, M4x10 Torx T15 - Teknik Makina
Combining robust construction, precise 27 mm shank support and direct compatibility with SNHU 1206 indexable inserts, this corner tool head delivers steady turning performance and reliable insert clamping via an M4x10 Torx screw; order directly through Metav Werkzeuge or consult their specialists for application advice. Corner tool head for SNHU 1206 indexable inserts — 80 mm diameter, 27 mm shank | Teknik Makina A sturdy corner tool head engineered to secure SNHU 1206 indexable inserts for demanding turning operations in industrial workshops and production environments. Compatible with SNHU 1206 indexable inserts 80 mm head diameter for stable support 27 mm shank for standard toolholders Stable support for consistent turning accuracy The robust 80 mm head diameter and 27 mm shank create a rigid interface with the toolholder, reducing vibration and promoting consistent cutting conditions. This mechanical stability translates into improved surface finish and extended insert life: fewer re‑settings mean less downtime and a more predictable production flow. The component’s mass and geometry are optimised for dimensional stability, with a rated weight of 1.076 kg that contributes to steady cutting forces without compromising handling. Fast, secure insert clamping designed to save time Changing and securing inserts is straightforward thanks to the M4x10 Torx screw and the corresponding T15 key specification. The screw‑and‑pocket design ensures a positive clamping position for SNHU 1206 style indexable inserts, reducing the risk of misalignment during re‑indexing. Compatibility with inserts from Palbit and other SNHU 1206 suppliers makes this holder a flexible choice for workshops that rely on standardised, widely available inserts, enabling quick turnaround between jobs. Built for industrial compatibility and ease of integration Designed for straightforward integration into existing toolholder systems, the head accepts a 27 mm mounting diameter and an overall length of 50 mm, providing a compact but rigid solution for internal and external turning setups. The geometry supports up to 7 cutting edges in the tool assembly concept, offering options for multi‑edge configurations where applicable. As a standardised component, it reduces tooling complexity and simplifies spare‑part management on the shop floor. Reliability, traceability and procurement confidence Supplied by Teknik Makina and stocked via Metav Werkzeuge, the accessory pairs proven manufacturing with dependable distribution. Technical clarity in the specification — including the Torx fastening and shank dimensions — supports straightforward procurement decisions and ensures the part performs as expected in serial production. For purchase planning or to confirm compatibility with specific toolholders, Metav’s product specialists can provide clarifications and confirm delivery options. For procurement or technical advice on the Teknik Makina corner tool head (SKU T619TM), contact Metav Werkzeuge in Emmerich by phone on +49 2822 7131930 or by email at info@metav-werkzeuge.com to discuss application‑specific suitability and availability. Technical data Article number: T619TM Designation: Corner tool head for SNHU 1206 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 80 mm Shank / clamping diameter: 27 mm Overall length: 50 mm Weight: 1.076 kg Cutting edges: 7 Special features Compatible with SNHU 1206 inserts Suitable for inserts from Palbit Fastening screw: M4x10 Torx Required Torx key: T15 FAQ What insert type fits this tool head? The tool head accepts SNHU 1206 indexable inserts, compatible with standard SNHU 1206 holders and inserts from manufacturers such as Palbit. Which fastening hardware is required for insert clamping? Insert clamping is secured by an M4x10 Torx screw; the corresponding Torx key size is T15 for proper tightening and maintenance. What are the key mounting dimensions to check before ordering? Critical dimensions are a 27 mm shank diameter and an 80 mm head diameter; overall length is 50 mm, ensuring fitment with matching toolholders. Can this head be used for heavy‑duty turning applications? The head’s 80 mm diameter and mass (approx. 1.076 kg) provide the rigidity expected for demanding turning tasks when mounted correctly in a suitable holder. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Tool Head for SPMG 0904 Indexable Inserts L52mm With Internal Coolant - Teknik Makina
Take advantage of the combination of compact dimensions, internal coolant and precise 90° cutting geometry for reliable corner turning — order the corner head directly via Metav Werkzeuge or consult our specialists for tailored technical advice. Corner head for SPMG 0904 Indexable Inserts — 80 mm, internal coolant (Teknik Makina) Corner head for SPMG 0904 Indexable Inserts is a compact turning solution designed for precise corner operations in workshop and production settings. 80 mm diameter for compact machining Internal coolant for improved chip evacuation Compatible with Taegutec SPMG 0904 inserts 90° cutting angle for precise corner turning Better chip control and longer insert life with internal coolant The integrated internal coolant channel delivers coolant directly to the cutting zone, reducing heat and flushing chips away from the cutting edge. This targeted cooling improves tool life and stabilises cutting conditions during continuous operation, leading to fewer tool changes and more consistent component quality. The coolant feed is particularly beneficial when machining interrupted cuts or narrow shoulder features, where chip evacuation is critical for maintaining surface integrity and extending insert life. Accurate fit and secure clamping for consistent results Designed to accept SPMG 0904 indexable inserts from Taegutec, the head features a defined 90° cutting angle and secure fastening with a T15 Torx drive and M3.5x8.5 screw. The precise interface ensures repeatable seating and minimises runout, which helps to achieve predictable dimensional results and reduces setup time. The configuration supports fast insert changes and reliable torque transfer for stable machining, improving throughput without sacrificing accuracy. Compact footprint with robust workshop performance With an 80 mm diameter and an overall length of 52 mm, the head offers a compact footprint for tight setups while still providing a substantial cutting face. The component’s mass of 1.088 kg gives a stable platform for medium-duty turning operations, helping to damp vibrations and improve surface finish. The combination of compact dimensions and sturdy construction makes this head a practical choice for production lines and job-shop environments that require efficient corner turning with minimal setup complexity. For precision corner turning with internal coolant capability, choose the Teknik Makina corner head and contact Metav Werkzeuge for expert advice and reliable supply from Emmerich. Technical data SKU: T342-1TM UID: T342-1TM Name: Eckmesserkopf for SPMG 0904 Indexable Inserts Product type: Eckmesserkopf Label: 80mm Eckmesserkopf SPMG 0904 L52mm mit Innenkühlung Manufacturer: Teknik Makina Facts Diameter: 80 mm Overall length: 52 mm Weight: 1.088 kg Shank / bore diameter: 27 mm Cutting angle: 90° Cutting edges: 7 Torx key: T15 Torx screw: M3.5x8.5 ECLASS: 21181015 Special features Internal coolant: true Compatible inserts: SPMG 0904 Compatible insert manufacturer: Taegutec Category path: Zerspanen > Eckmesserkopf FAQ What inserts fit this tool head? The corner head accepts SPMG 0904 indexable inserts; compatibility has been tested with Taegutec SPMG 0904 inserts (SKU T342-1TM). Does the head provide internal coolant? Yes — the Eckmesserkopf includes internal coolant channels to direct coolant to the cutting zone and improve chip evacuation for the Teknik Makina corner head. Which fastener is required for insert clamping? Insert clamping uses a T15 Torx drive and M3.5x8.5 screw as specified for the Teknik Makina Eckmesserkopf (SKU T342-1TM). Is the shank diameter specified for machine mounting? The shank or bore diameter is 27 mm, which should be checked against the machine tool adaptor before installation. What cutting angle and geometry does the head provide? The head is configured with a 90° cutting angle for precise corner turning and predictable seating of SPMG 0904 inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Tool Head For TNKT 1606 L50mm With Internal Coolant, 90° - Teknik Makina
Robust 80 mm corner tool head with internal coolant and compatibility for TNKT 1606 indexable inserts; the rigid design and 90° cutting angle deliver stable turning and long insert life. Order the corner tool head for TNKT 1606 indexable inserts directly via Metav Werkzeuge or ask our consultants if needed. Corner tool head for TNKT 1606 indexable inserts — 80 mm diameter, internal coolant (Teknik Makina) A compact, heavy‑duty corner tool head engineered for external turning and facing operations with TNKT 1606 indexable inserts, combining rigidity and coolant delivery for consistent results on production lathes. 80 mm diameter for stable cutting Internal coolant for efficient chip control Compatible with TNKT 1606 inserts by Korloy Eight cutting edges with 90° cutting angle Increased rigidity and consistent surface quality The wide 80 mm diameter and compact 50 mm overall length reduce overhang and vibration, which directly benefits machining accuracy and surface finish. The larger cross section increases toolholder stiffness, enabling higher feed rates or heavier cuts without compromising the process. For production environments where repeatability matters, this configuration supports reduced scrap rates and longer uninterrupted cycles by keeping cutting forces stable and predictable. Internal coolant for longer insert life and safer chip control Integrated internal coolant supplies cutting fluid directly to the cutting zone, lowering tool temperature and improving lubrication at the interface. This targeted cooling reduces thermal wear on the insert and minimises built‑up edge formation, which in turn extends insert life and maintains dimensional accuracy. In sectors where downtime is costly, the combination of coolant delivery and controlled chip flow helps sustain throughput and reduces the frequency of manual intervention. Compatibility and serviceability for uninterrupted production Designed for TNKT 1606 indexable inserts from Korloy, the toolhead uses M4x10 Torx screws with a T15 drive for secure clamping and straightforward insert changes. The head provides eight cutting edges and a standard 90° cutting angle, facilitating quick indexing and predictable chip geometry. The modest weight (approx. 1.118 kg) and standard interfaces simplify integration into existing turning tool systems, supporting a rapid return to production after maintenance. For application advice or to ensure the best match for a specific turning task, contact Metav Werkzeuge in Emmerich — our specialists can advise on tooling combinations and supply the Teknik Makina corner tool head ready for immediate delivery. Technical Data SKU: T595TM Product type: Corner tool head Brand: Teknik Makina Article name: Corner tool head for TNKT 1606 indexable inserts ECLASS: 21181015 Core data Diameter: 80 mm Total length: 50 mm Weight: 1.118 kg Cutting angle: 90° Cutting edges: 8 Special features Internal coolant Compatible with TNKT 1606 inserts (Korloy) Torx screw: M4x10 Torx key: T15 FAQ Which indexable inserts fit this tool head? The corner tool head is designed for TNKT 1606 indexable inserts, compatible with inserts from Korloy and other manufacturers following the same insert designation. Is there internal coolant and how does it benefit machining? Yes — the head features internal coolant, which directs fluid to the cutting zone to reduce thermal wear, improve lubrication and assist chip evacuation for longer insert life. What fasteners are used for the inserts? Inserts are secured with M4x10 Torx screws, driven with a T15 key for reliable clamping and simple replacement. How many cutting edges does the head provide and what is the angle? The tool head presents eight cutting edges and a 90° cutting angle, enabling consistent chip formation and easy indexing. What are the main dimensions and mass of the component? Key dimensions are 80 mm diameter and 50 mm total length; the mass is approximately 1.118 kg, suitable for standard turning tool posts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Tool Head for WNMU 0806 Indexable Inserts, 90° Cutting Angle, M5x12 Torx Screw - Teknik Makina
Take advantage of robust geometry and simple insert compatibility to secure consistent 90° edges and efficient tool changes; benefit from a compact 27 mm shank and straightforward Torx clamping for fast integration into existing CNC tool chains. Order via Metav Werkzeuge or request tailored advice from our specialists. Corner Insert Head by Teknik Makina — for WNMU 0806 Indexable Inserts, 90° Cutting Angle The Corner Insert Head is an indexable cutting head designed for square-edge turning and facing operations with WNMU 0806 indexable inserts, suitable for production and workshop toolholders 90° cutting angle for precise shoulders Compatible with WNMU 0806 indexable inserts 27 mm shank diameter for standard toolholders Torx M5x12 clamping; T20 key required Consistent 90° edges from a purpose-built geometry The head delivers repeatable right-angle results thanks to its 90° cutting angle and a tool face diameter of Ø80 mm, which together promote uniform contact and stable chip control. The geometry minimises secondary finishing work by producing accurate shoulder faces on a variety of components. Designed for indexable systems, the head accepts WNMU 0806 inserts so that cutting performance can be maintained through fast insert indexing or replacement, reducing total machining cycle time. Secure clamping for minimal downtime Clamping and insert retention are engineered for reliability: the unit uses an M5x12 Torx screw and requires a T20 key for positive, reproducible torque. This simple fastening solution ensures blade seating with consistent clamping force, lowering the risk of micro-movement under load. Compatibility with Kyocera inserts provides access to a wide range of grades and geometries, enabling optimisation for finish or roughing tasks without compromising set-up speed. Compact dimensions that enhance rigidity and accessibility With a 27 mm tool shank and an overall length of 50 mm, the head balances reach and stiffness for stable cutting conditions in confined tool bays. The compact mass of 1.016 kg contributes to reduced overhang-induced vibration when compared with longer holders, improving surface finish and tool life. Its modest diameter and layout make it straightforward to fit into multi-station turrets or modular holders, supporting efficient tool population across small-batch and high-volume production. Applications, compatibility and who benefits This indexable head is suited to metal‑turning shops, contract manufacturers and maintenance workshops requiring dependable square-edge operations. The design addresses frequent needs in finishing, shoulder forming and light facing where rapid insert changes and consistent geometry are priorities. As part of a modern toolset, the head integrates into established indexable insert routines and is a practical choice for teams seeking to streamline set-up time while maintaining industrial-level repeatability. Contact Metav Werkzeuge for assistance integrating the Teknik Makina corner insert head into production tooling and to receive bespoke recommendations from our product specialists Technical data Article number: T545TM Manufacturer: Teknik Makina Compatible inserts: WNMU 0806 (indexable inserts) Compatible insert manufacturer: Kyocera Clamping screw: M5x12 Dimensions and weights Diameter: Ø80 mm Shank diameter: 27 mm Overall length: 50 mm Weight: 1.016 kg Cutting angle: 90° Number of cutting edges: 5 Features and fittings Torx key: T20 Indexable insert system compatibility Compact design for turret and holder integration FAQ What inserts fit this corner head? The corner insert head accepts WNMU 0806 indexable inserts; the design is compatible with Kyocera‑specified grades and geometries. Is the head suitable for high‑speed finishing? The indexable head (Teknik Makina, SKU T545TM) is designed for stable finishing when fitted with the appropriate insert grade and correct clamping torque. Which toolholders will accept the 27 mm shank? Holders and turrets designed for a 27 mm shank diameter are suitable; ensure the toolholder offers the correct seating and clamping for the head's compact length. How is the insert secured in the cutting head? Insert retention uses a Torx‑driven M5x12 clamping screw, tightened with a T20 key to provide consistent and secure seating. For which operations is this head optimised? The product is optimised for square‑edge turning, shoulder forming and light facing applications where repeatable 90° geometry is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Corner Tool Head for XEKT 1904 Indexable Inserts L50mm With Internal Coolant, 90° Cutting Angle - Teknik Makina
High-performance machining with direct coolant delivery and proven insert compatibility ensures consistent corner turning results; robust clamping and a compact 50 mm overall length support stable cuts and reduced vibration. Order or request advice via Metav Werkzeuge for seamless supply and workshop integration. Eckmesserkopf — 80 mm corner tool head with internal coolant (Teknik Makina) The Eckmesserkopf is a 90° corner turning head designed for use with XEKT 1904 indexable inserts, ideal for precision turning tasks in production and workshop environments. 80 mm body diameter Integrated internal coolant Compatible with XEKT 1904 Korloy inserts 90° cutting angle for corner turning Enhanced productivity through purpose-built geometry The compact design combines an 80 mm diameter with a 50 mm overall length, delivering a rigid tool carrier that stabilises the cutting process and reduces chatter. This geometry supports repeatable results when performing corner and profile turning operations; the short overhang reduces bending moments and allows higher effective cutting parameters. Paired with XEKT 1904 indexable inserts, the head provides a straightforward route to optimised cycle times and predictable tool life, translating directly into improved throughput on batch and single-piece production. Direct coolant for longer insert life and cleaner chips Equipped with internal coolant, the head channels coolant directly to the cutting edge, improving heat control and evacuation of chips from the cutting zone. This targeted delivery lowers cutting temperatures and often extends insert life while enhancing surface finish on difficult-to-machine materials. The feature is particularly valuable for operations requiring consistent surface quality and reduced rework; maintenance remains simple since coolant access is integrated rather than relying on external nozzles. Secure fastening and practical workshop handling Assembly and insert clamping use a Torx T15 interface and M4x8.5 Torx screw for reliable, repeatable torque settings and quick changeovers. The head’s mass (0.791 kg) contributes to damping during cutting, and the robust clamping arrangement reduces the risk of insert movement under load. For workshops seeking straightforward serviceability, the familiar Torx interface ensures common tool availability and consistent fastening results across teams. Compatibility and application scope Designed for compatibility with Korloy XEKT 1904 inserts, this corner cutting head integrates easily into existing tool inventories that use the same insert family. The 90° cutting geometry is suited to a wide range of turning tasks including facing, profile turning and light shoulder work where a square or corner-type engagement is required. The tool head’s specification supports integration into both dedicated CNC machining centres and flexible workshop turning applications. Choose the Teknik Makina corner tool head with integrated internal coolant for consistent 90° corner turning — contact Metav Werkzeuge for technical guidance and reliable supply from Emmerich. Technical data Article number: T368TM SKU: T368TM Eclass: 21181015 Core dimensions Diameter: 80 mm Overall length: 50 mm Weight: 0.791 kg Cutting angle: 90° Cutting edges: 5 Features & compatibility Internal coolant: yes Suitable for: XEKT 1904 indexable inserts Compatible insert manufacturer: Korloy Fastening: Torx T15 Screw: M4x8.5 Product type: Corner tool head Manufacturer: Teknik Makina FAQ Which inserts fit this corner tool head? The head is designed specifically for XEKT 1904 indexable inserts and is compatible with Korloy inserts of that designation. Does the tool head provide coolant to the cutting zone? Yes, the tool head includes internal coolant to deliver fluid directly to the cutting edge for improved tool life and chip control. What fastening system is used for insert clamping? Insert clamping uses a Torx T15 interface with an M4x8.5 Torx screw to ensure consistent torque and reliable clamping. Is the head suitable for heavy overhangs? The compact 50 mm overall length and 80 mm body diameter favour rigidity; for long overhangs, reduced cutting parameters are recommended to maintain stability. Can the head be used on manual lathes and CNC turning centres? Yes, the corner tool head is suitable for both manual workshop turning and CNC applications where XEKT 1904 inserts are employed. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com